MA0508-EB
Operation Guide DQ-542/542B
3 MIN/DATE button
ILLUSTRATION
• Pressing this button while “TM” is selected by the Mode switch 5 advances the minute setting.
• Pressing this button while “CALENDAR” is selected by the Mode switch 5 advances the day setting.
4 HR/MONTH button
• Pressing this button while “TM” is selected by the Mode switch 5 advances the hour setting.
• Pressing this button while “CALENDAR” is selected by the Mode switch 5 advances the month setting.
5 Mode switch
NORMAL: For normal use
AL: For adjusting the alarm setting
TM: For adjusting the time setting
CALENDAR: For adjusting the date setting
6 Alarm Mode selector
SNZ: Snooze alarm on
ON: Alarm on
OFF: Alarm off
7 Battery
SETTING THE CLOCK
1. Slide the Mode switch 5 to “TM”. This
causes the current time to flash on the
display.
Press to advance the Press to advance the
hour setting. minute setting.
Press to toggle between
12-hour and 24-hour
timekeeping.
2. Use the 12 • 24/YEAR button 2, MIN/
DATE button 3, and HR/MONTH
button 4 to set the time. Holding down
the MIN/DATE button 3 or HR/
MONTH button 4 changes the
corresponding setting at high speed.
• Make sure you set the correct am/pm
time if you are using 12-hour
PM indicator
timekeeping. The PM indicator indicates
PM times, while nothing is indicated for
AM times.
Hour
Minutes
• The seconds count reverts to 00
automatically whenever you finish
adjusting the minute setting.
3. Slide the Mode switch 5 to
“CALENDAR”. This causes the current
date to flash on the display.
Press to advance the Press to advance the
month setting. day setting.
Press to advance the
year setting.
4. Use the 12 • 24/YEAR button 2, MIN/
DATE button 3, and HR/MONTH
button 4 to set the date. Holding down
any button advances the corresponding
setting at high speed.
• You can set the year in the range of 2004
to 2039.
• A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the
clock.
• Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.
Alarm Off
Alarm On
Snooze Alarm On
Year
Month
PM indicator
Alarm time
Snooze on indicator
Day
5. Slide the Mode switch 5 to “NORMAL”. This will cause the figures on the display to
stop flashing.
Current time
(Hour, minutes)
Date
(month – day)
Alarm on indicator
Alarm on indicator
GENERAL GUIDE
1 SNOOZE/LIGHT button
• Press this button to illuminate the display for about three seconds.
• Pressing this button while the alarm is sounding stops the alarm.
2 12 • 24/YEAR button
• Press this button to toggle between 12-hour and 24-hour timekeeping.
• Pressing this button while “CALENDAR” is selected by the Mode switch 5 advances the year setting.
1
|