User’s Manual
CAMILEO X100
Contents
Section 1 Getting to Know Your Camcorder........................................ 6
Overview................................................................................ 6
Check the Components........................................................ 6
Safety Instructions................................................................ 7
System Requirements .......................................................... 7
Front View ............................................................................. 8
Rear View............................................................................... 8
Side View ............................................................................... 9
Bottom View .......................................................................... 9
Section 2 Getting Started..................................................................... 10
Loading the Battery ............................................................ 10
Inserting and Removing an SD Card (Optional)............... 10
Turning the Camcorder On and Getting Started.............. 11
Turning the Camcorder Off ................................................ 11
Section 3 Record Mode........................................................................ 12
Button Function .................................................................. 12
LCD Monitor Information.................................................... 13
Movie Recording................................................................. 15
Using the Pre-Record Function......................................... 15
Picture Recording............................................................... 16
Using Flash or Digital Light Function............................... 16
Using Zoom Function......................................................... 16
Options for Record Menu................................................... 17
Operations for Record Mode ............................................ 17
Movie Resolution ................................................................ 18
Picture Resolution .............................................................. 18
White Balance .................................................................... 19
Scene .................................................................................. 19
Movie Effect......................................................................... 20
Contents
Picture Effect....................................................................... 22
Section 4 Playback Mode..................................................................... 24
Button Function .................................................................. 24
LCD Monitor Information.................................................... 25
Operations for Playback Mode ......................................... 27
Movie Playback ................................................................... 27
Picture Playback ................................................................. 29
Section 5 Setting Your Camcorder .................................................... 31
Setting Menu ....................................................................... 31
Section 6 Viewing Pictures and Movies on TV .................................. 35
Connecting to a High-Definition 16:9(Wide) TV ............... 35
Connecting to a non-high-definition 4:3 TV ..................... 35
Section 7 Viewing Pictures and Movies on PC.................................. 36
Installing Bundled Software............................................... 36
Transferring Pictures or Movies to a Computer............... 36
Section 8 Burning the Recorded Clip into a DVD.............................. 37
Section 9 Uploading Video Files to YouTube..................................... 40
Section 10 Video File Converter.......................................................... 45
Contents
Section 11 Specifications ................................................................... 47
Section 12 Troubleshooting ................................................................ 48
Section 13 Other Information.............................................................. 49
TOSHIBA Support ............................................................... 49
Operating Environment Conditions .................................. 49
Regulatory Information ...................................................... 49
Additional Information........................................................ 51
About the battery pack ......................................................51
EN
5
Section 1
Getting to Know Your Camcorder
Overview
The camcorder with 10 Mega Pixel sensor can take H.264 movies. By way of using H.264 technology,
more videos can be taken within certain amount of memory. High quality images with up to 16 mega-
pixels can also be delivered smoothly. With a color LCD monitor, users can compose images and
examine them easily.
The camcorder features 3” LCD touch panel which is an ideal platform for you to operate your camcorder.
The menu options are accessible with your finger. With the touch panel, you can select the options
directly and quickly.
The camcorder also features movie recording at an HD resolution of 1920x1080. You can also connect
it to an HDTV via an HDMI cable, and easily playback the recorded high-definition videos on the wide
screen HDTV.
Moreover, the camcorder has an advanced uploading feature. With the exclusive built-in YouTube Direct
application, you can upload the videos captured by the camcorder to YouTube more effortlessly .
ISO sensitivity and color balance can either be adjusted automatically or changed manually. A 10x digital
zoom helps you to control over the movies and pictures you take.
The varied effect options, such as Time Lapse and Slow Motion, make recording more fun.
The built-in memory allows you to take pictures and to record movies without a memory card. The
memory card slot allows users to increase the storage capacity.
Note
Partial memory of the built-in memory is used for the camcorder’s Firmware code.
Check the Components
Unpack the package and make sure all standard accessories listed are included:
Lithiunm-io
Camcorder
USB Cable
AV Cable
HDMI Cable
AC-Adaptor
Remote Control
Rechargeable
Battery
*
CD-ROM
(Software &
User’s Manual)
Quick Start Guide
Warranty Leaflet
Cleaning Cloth
Lens Cover Set
(Lens cover & strap)
Cloth Bag
*preinstalled in camcorder device
Note
Please remove the lens protect film on lens before use.
EN
6
Safety Instructions
1. Do not drop, puncture or disassemble the camcorder; otherwise the warranty will be voided.
2. Avoid all contact with water, and dry hands before using.
3. Do not expose the camcorder to high temperature or leave it in direct sunlight. Doing so may
damage the camcorder.
4. Use the camcorder with care. Avoid pressing hard on the camcorder body.
5. For your own safety, avoid using the camcorder when there is a storm or lightning.
6. Do not use batteries of different specifications. Doing so may lead to the potential for serious
damage.
7. Remove the battery during long periods between usage, as a deteriorated battery may
affect the functionality of the camcorder.
8. Remove the battery if it shows signs of leaking or distortion.
9. Use only the accessories supplied by the manufacturer.
10. Keep the camcorder out of the reach of infants.
11. Risk of explosion if battery is replaced by an incorrect type.
12. Dispose of used batteries according to the instructions.
System Requirements
• Microsoft Windows XP/Vista/7
• Intel Pentium 4 2.4GHz or above
• 512 MB RAM
• CD-ROM Drive
• 1 GB free HDD space
• Available USB port
• 16-bit Color Display
Note
The LCD screen is manufactured using extremely high-precision technology. However, some
tiny black and/or bright dots (white, red, blue or green) may appear on the LCD screen.
These dots are a normal result of the manufacturing process, and do not affect the recording.
EN
7
Front View
Tele/Wide Button
Speaker
Flash
Lens
Microphone
Rear View
Movie Mode LED Indicator
Picture Mode LED Indicator
Playback LED Indicator
Playback Button
Rolling Wheel
Mode Button
OK Button
EN
8
Side View
LCD Touch Panel
SD card Slot
Power Button
Pre -Record/YouTube Direct Button
Mini USB 2.0 Port
TV Port
HDMI Port
Bottom View
Safety latch
Self Timer LED
Tripod Socket Battery Cover
EN
9
Section 2
Getting Started
Loading the Battery
Before using the camcorder, users must load the Lithium-
ion rechargeable battery come within the package.
1. Slide the safety latch to the unlocked position and open
the battery cover.
2. Insert the battery according to the correct polarity marks
( + or -).
3. Close the battery cover firmly, and slide the safety latch
to the locked position.
Note
Please remove the insulator on battery connection before use.
Inserting and Removing an SD Card (Optional)
The camcorder comes with an internal memory which
allows you to store pictures and movies. You can expand the
memory capacity by using an optional SD/SDHC memory
card.
1. Insert the memory card into the slot. Please refer to the
figure on the right side.
2. To remove an installed SD card, press the card inwards
to release it.
3. When the card pops out, gently remove it from its slot.
4. Recommended memory capacity: 1GB and above.
Note
• When a memory card is fitted, movies/pictures are saved on the card rather than on the built-in
memory.
• Protecting Data on an SD Card: SD Card is read-
only when it is locked. No pictures or movies can be
recorded when the SD card is locked. Make sure the
Writeable
position
Write-Protected
Position
lock is on the writeable position before recording any
media.
EN
10
Turning the Camcorder On and Getting Started
• To turn on the camcorder:
1. Flip out the LCD panel; the camcorder will turn on automatically.
2. Or press Power Button for one second to turn it on.
• To record movies: Press Mode Button or touch
on the screen to switch to the Movie Record
mode .(The Movie Mode LED Indicator
will light up.) Press OK Button to record movies.
• To take a picture: Press Mode Button or touch
on the screen to switch to the Picture Record
mode. (The Picture Mode LED Indicator
will light up.) Press OK Button halfway down until the
focusing frame turns from white to green. Then, press it fully down to take pictures.
Focusing Frame: White
Focusing Frame: Green
• To take a picture during movie recording: When recording movies, press Mode Button (
the image. The Dual record icon( ) appears on the LCD monitor.
• To view stored movies and pictures: Press Playback Button or press
to the Playback mode. (The Playback LED Indicator
) to capture
on the screen to switch
will light up.) Press Mode Button or touch
on the screen to switch between Movie Preview Screen and Picture Preview Screen.
Turning the Camcorder Off
• To turn off the camcorder: You can either press the Power Button for one second, or you can place
the LCD panel back to its original position.
EN
11
Section 3
Record Mode
Button Function
Rolling Wheel: Rotate to move between the wheel menu
options.
Right Button: LCD Information ON/OFF. In Record menu,
press to switch to the submenu.
Left Button: Flash Auto/Red-Eye-Reduction/Digital Light/
Flash OFF. In Record menu, press to return to the main
menu.
Up Button: Move between the option items.
Down Button: Delete the current or all movies/pictures.
Move between the option items.
OK Button:
1. Validate the setting.
2. In Movie Record Mode, press to take movies. To stop
recording, press it again.
3. In Picture Record Mode, press to take pictures.
Tele Button : Zoom In
Wide Button : Zoom out
Playback Button:
1. Switch between Record / Playback Mode.
2. For quick review, press it after recording.
3. In Record menu, press to exit.
Mode Button:
1. Switch between Movie Mode and Picture Mode.
2. When recording movies, press to capture the image.
Power Button: Press down for one second to turn on or turn
off the camcorder.
Pre-Record/YouTube Direct Button:In Record Mode, press
to activate the function that the movies are recorded 3 seconds
before the OK Button is pressed.
EN
12
LCD Monitor Information
The indicators shown below may display on LCD when movies and pictures are recorded:
Movie Resolution
FHD (1080i 60)
FHD (1080p 30)
HD (720p 60)
HD (720p 30)
(1)
VGA (4:3)
Slow Motion (Record movies at 320x240 resolution.)
Picture Resolution
High (16 MP)
Standard (10 MP)
Low (3 MP)
Recording time of the movie that can still be taken at current
resolution
(2)
Number of images that can still be taken at current resolution
Self-timer enabled
(3)
Dual Record
(4)
(5)
Stabilization
Pre-Record Mode
Time Lapse
EN
13
Scene
Skin
(6)
Night
Backlight
(7)
(8)
Macro Position Focusing
Manual White Balance
(9)
Motion Detection
Zoom meter:
(10)
1X~100X (10X Optical zoom and 10X Digital zoom)
(11)
(12)
(13)
Record Menu
Playback Mode
Movie/Picture Record Mode
Movie Mode
Picture Mode
Digital Light
Flash Auto
(14)
Red Eye Reduction
Digital Light
Flash Off
(15)
(16)
SD Card Inserted
Battery: full power
Battery: medium power
Battery: low power
Battery: empty power
DC power mode
Note
Scene: B/W / Classic / Negative effect can be previewed immediately without indicator on the
LCD.
EN
14
Movie Recording
• In Movie Record Mode (The Movie Mode LED Indicator
lights up), press OK Button to start
recording. When a movie is being recorded, a time indicator will display on the LCD monitor. To stop
recording, press OK Button again.
• Optional function
1. Dual record: press Mode Button (
on the LCD monitor.
) to capture the image. The Dual record icon(
) appears
• Press Playback Button to view the recorded movies.
• Five resolution settings are available:
Video Quality
FHD (1080i 60)
FHD (1080p 30)
HD (720p 60)
HD (720p 30)
VGA (4:3)
Note
• The image resolution captured during movies recording is the same as the video resolution.
• The flash can not be used when capturing image during movies recording.
Using the Pre-Record Function
• The Pre-record function ensures that you will not miss any critical recording opportunities, The movies
are recorded 3 seconds before the OK Button is pressed.
• To use the Pre-Record function:
1. Press the Pre-Record Button (
LCD monitor.
) in Record Mode. The Pre-Record icon(
) appears on the
2. Aim the camcorder at the subject and position it securely.
3. Press the OK Button to start recording. (The camcorder records 3 seconds before you actually press
the OK Button.)
• To use the function again, set it again.
Note
• Time Lapse function can not be used when the Pre-Record function is activated.
EN
15
Picture Recording
• In Picture Record Mode (The Picture Mode LED Indicator
lights up), press OK Button halfway
down until the focusing frame turns from white to green. Then, press it fully down to take a picture.
• Press Playback Button to view the picture.
• Three resolution settings are available:
Image Quality
High Quality:16 Mega Pixels
Standard Quality:10 Mega Pixels
Low Quality:3 Mega Pixels
Using Flash or Digital Light Function
• This camcorder has three flash settings and one setting to allow you to extend the brightness of the
objects that are dark or in the shadow. Using Left Button to change the settings.
1. Flash Auto (
): The flash fires automatically according to light conditions. Use this mode for
general photography. (Picture Recording Only)
2. Red Eye Reduction(
): The pre-flash will fire to reduce the red-eye effect. (Picture Recording
Only)
3. Digital Light (
): To extend the dynamic range for backlight and high contrast sense so that
the objects will be brighter and clearer.
4. Flash Off (
): The flash will not fire under any circumstances. Use this mode when taking
images in a place where flash photography is prohibited, or when the subject is distant (beyond
the range of the flash). (Picture Recording Only)
Note
The flash will be disabled automatically when the battery power is low (
).
Using Zoom Function
• The zoom magnifies images when recording movies or taking pictures.
1. To zoom in/out, press the Tele/Wide Button.
2. It can be set from 1X~100X (10X Optical zoom and 10X Digital zoom).
EN
16
Options for Record Menu
Movie Record Mode Menu
Movie Resolution
White Balance
Scene
Effect
• Stabilization
• FHD (1080i 60)
• FHD (1080p 30)
• HD (720p 60)
• HD (720p 30)
• VGA (4:3)
• Auto
• Auto
• Skin
• Night
• Daylight
• Fluorescent
• Tungsten
• Macro Mode
• Motion Detect.
(Motion Detection)
• Slow Motion
• Time Lapse
• Backlight
• B/W (Black/White)
• Classic
• Negative
Picture Record Mode Menu
Picture Resolution
White Balance
Scene
Effect
• High (16MP)
• Std (10MP)
• Low (3MP)
• Auto
• Auto
• Self-Timer
• Macro Mode
• ISO
• Daylight
• Fluorescent
• Tungsten
• Skin
• Night
• Backlight
• B/W (Black/White)
• Classic
• Negative
Operations for Record Mode
Operation
Screen
1. Touch
(on-screen icon) in Record Mode. The wheel
menu will show on the screen.
2. Scroll the wheel menu on the screen lightly with
your finger to move between the options, which are
Resolution, Scene, Effect, White Balance, and Setting.
3. Submenu will pop up while stopping on each option.
4. Touch to select the specific option you want to adjust,
then touch [OK] to validate the setting.
5. Or touch the Return icon (
change.
) to exit without any
6. Touch
pages.
/
on the screen to change between the
EN
17
Movie Resolution
Five resolution settings are available.
• FHD(1080i 60): Record movies at 1920x1080i 60 resolution.
• FHD(1080p 30): Record movies at 1920x1080p 30 resolution.
• HD(720p 60): Record movies at 1280x720p 60 resolution.
• HD(720p 30): Record movies at 1280x720p 30 resolution.
• VGA(4:3): Record movies at 640x480p 30 resolution.
Operation
Display Screen
1. In Movie Record Mode, touch
icon) to show the wheel menu.
(on-screen
2. Scroll and stop on [Resolution]. The submenu of
Resolution pops up.
3. Touch the desired option.
4. Touch [OK] to validate the setting.
Picture Resolution
Three resolution settings are available.
• High(16MP): Shoot pictures at 4608x3456, 16MP quality.
• Std(10MP)(Standard): Shoot pictures at 3644x2748, 10MP quality.
• Low(3MP): Shoot pictures at 2048 x 1536, 3MP quality.
Operation
Display Screen
1. In Picture Record Mode, touch
icon) to show the wheel menu.
(on-screen
2. Scroll and stop on [Resolution]. The submenu of
Resolution pops up.
3. Touch the desired option.
4. Touch [OK] to validate the setting.
EN
18
White Balance
The camcorder adjusts the color balance of images automatically. Three manual white balance settings
are available:
• Auto: The camcorder automatically adjusts white balance.
• Daylight: Under outdoor condition.
• Fluorescent: Under fluorescent light condition.
• Tungsten: Under tungsten light condition.
Operation
Display Screen
1. In Movie/Picture Record Mode, touch
screen icon) to show the wheel menu.
(on-
2. Scrollandstopon[WhiteBalance].Thesubmenu
of White Balance pops up.
3. Touch the desired option.
4. Touch [OK] to validate the setting.
Scene
You can select the mode according to the scene condition.
• Auto: Shoot without any special effect on the image.
• Skin: Shoot with an effect that makes skin tones more natural.
• Night: Use Night Mode for night scenes or low light conditions.
• Backlight: You can take shots when the bright light is behind the subject.
• B/W (Black/White): The image is converted to black-and-white.
• Classic: The image is converted to a sepia look.
• Negative: The image is converted as the negative of the normal
Operation
Display Screen
1. In Movie/Picture Record Mode, touch
screen icon) to show the wheel menu.
(on-
2. Scroll and stop on [Scene]. The submenu of
Scene pops up.
3. Touch the desired option.
4. Touch [OK] to validate the setting.
Note
To avoid blurry pictures, place the camcorder on a flat, steady surface, or use a tripod when taking
shots in the Night Mode.
EN
19
Movie Effect
Operation
Display Screen
1. In Movie Record Mode, touch
icon) to show the wheel menu.
(on-screen
2. Scroll and stop on [Effect]. The submenu of
Effect pops up.
3. Touch the desired Effect option to enter its option
screen.
4. The Movie Effect submenu contains 5 options--
Stabilization, Macro Mode, Motion Detection,
Slow Motion, and Time Lapse --for you to adjust
the camcorder’s settings.
Stabilization
Record with an effect of reducing camcorder shake to result in more stable videos.
Operation
Display Screen
1. In the Effect submenu, touch [Stabilization] to
enter the option screen.
2. Touch the desired option.
3. Touch [OK] to validate the setting.
Note
Stabilization doesn’t apply on 1080 i60.
Macro Mode
• Auto: The camcorder adjusts the focus automatically.
• Macro(
): The camcorder adjusts the focus with priority on close- up objects. Shoot in Macro
mode when the objects are located in 1 cm(0.39 inch)~Infinite (setting to the Wide side)/60 cm(23.4
inch)~Infinite(setting to the Tele side).
Operation
Display Screen
1. In the Effect submenu, touch [Macro Mode] to
enter the option screen.
2. Touch the desired option.
3. Touch [OK] to validate the setting.
EN
20
Motion Detection
Record videos automatically when the camcorder detects a movement.
Operation
Display Screen
1. In the Effect submenu, touch [Motion Detect.] to
enter the option screen.
2. Touch the desired option.
3. Touch [OK] to validate the setting.
4. Camcorderwillstarttorecordvideoautomatically
if it detects a movement. Stop recording if it does
not detect a movement.
Slow Motion
Record videos with slow motion effect. When the video is played, the playback time will be longer than
the actual recording time.
Operation
Display Screen
1. In the Effect submenu, touch [Slow Motion] to
enter the option screen.
2. Touch the desired option.
3. Touch [OK] to validate the setting.
Time Lapse
Record still images at specific intervals you can set and play them as one movie file.
• Off: Disable Time Lapse.
• 1 Sec.: Record one frame per second.
• 3 Sec.: Record one frame every 3 seconds.
• 5 Sec.: Record one frame every 5 seconds.
Operation
Display Screen
1. In the Effect submenu, touch [Time Lapse] to
enter the option screen.
2. Touch the desired option.
3. Touch [OK] to validate the setting.
Note
• Stabilization function can not be used when Time Lapse function is activated.
EN
21
Picture Effect
Operation
Display Screen
1. In Picture Record Mode, touch
icon) to show the wheel menu.
(on-screen
2. Scroll and stop on [Effect]. The submenu of
Effect pops up.
3. Touch the desired Effect option to enter its option
screen.
4. The Picture Effect submenu contains 3 options
--Self Timer, Macro Mode, and ISO-- for you to
adjust the camcorder’s setting.
Self-Timer
The self-timer allows you to take pictures with a ten-second time delay. The self-timer light on the front
of the camcorder will also blink. The speed of blinking will increase just before the picture is taken.
Operation
Display Screen
1. In the Effect submenu, touch [Self-Timer] to
enter the option screen.
2. Touch the desired option.
3. Touch [OK] to validate the setting.
Macro Mode
• Auto: The camcorder adjusts the focus automatically.
• Macro(
): The camcorder adjusts the focus with priority on close- up objects. Shoot in Macro
mode when the objects are located in 1 cm(0.39 inch)~Infinite (setting to the Wide side)/60 cm(23.4
inch)~Infinite(setting to the Tele side).
Operation
Display Screen
1. In Effect submenu, touch [Macro Mode] to enter
the option screen.
2. Touch the desired option.
3. Touch [OK] to validate the setting.
EN
22
ISO
The camcorder adjusts the ISO sensitivity of its images automatically. Three manual ISO sensitivity
settings are available. (800/1600/3200) The larger the number is, the higher the ISO sensitivity is set to.
Select a small number to shoot a smoother image. Select a large number to shoot an image in a dark
location or to shoot a subject moving at high speed.
Operation
Display Screen
1. In the Effect submenu, touch [ISO] to enter the
option screen.
2. Touch the desired option.
3. Touch [OK] to validate the setting.
Note
The image may become noisy when the ISO number is large.
EN
23
Section 4
Playback Mode
Button Function
The Buttons have the following functions in Playback Mode.
Rolling Wheel: Rotate to move to the previous/next movie/
picture.
Right Button: LCD Information ON/OFF; Fast forward.
Left Button: Fast rewind.
Down Button: Delete the current movie/picture or all movies/
pictures.
OK Button:
1. Enter Movie/Picture Playback Mode.
2. Validate the setting.
3. In Picture Playback Mode, press to start/stop the
slideshow.
Tele Button : Zoom In
Wide Button : Zoom out
Mode Button:
1. Switch between Movie Preview Screen and Picture Preview
Screen.
Playback Button:
1. Switch between Record /Playback Mode.
2. Return to the previous screen.
Pre-Record/YouTube Direct Button: In Movie Playback Mode,
press to select the current movie to upload to YouTube.
EN
24
LCD Monitor Information
Indicators on the LCD screen while in Playback Mode:
Playback Preview Screen
Movie Playback Mode
Picture Playback Mode
Movie Resolution
FHD (1080i 60)
FHD (1080p 30)
HD (720p 60)
HD (720p 30)
VGA (4:3)
(1)
Slow Motion (320x240)
Picture Resolution
High (16MP)
Standard (10MP)
Low (3MP)
Dual Record (The image resolution captured during movies recording
is the same as the video resolution.)
EN
25
(2)
(3)
(4)
(5)
Current number/ Total number of picture/movie.
Movie/Picture Preview Screen On
0003/0005
Return to the previous screen/ Switch to Record Mode
Movie playback time counter
(6)
Delete
(7)
(8)
Upload selected movies to YouTube
Volume
(9)
Previous movie/picture
Movies fast rewind
Movies Play
(10)
(11)
Movies Pause
(12)
(13)
Movies fast forward
Next movie/picture
Slideshow
(14)
(15)
Slideshow stop
Magnification Indicator
EN
26
Operations for Playback Mode
The Playback Mode is for viewing and managing movies and pictures on the built-in memory or on an
SD Card.
Operation
Display Screen
1. Press Playback Button (
) or press
on the
screen to switch to the Playback mode.
2. In the Playback preview screen, press Mode Button or
touch on the screen to switch between the Movie
mode and the Picture mode.
3. Sweep to the left to go to the previous picture/movie;
sweep to the right to go to the next picture/movie.
4. Touch on the picture/movie to go to Picture/Movie Playback
Mode.
Movie Playback
Operation
Display Screen
1. When in Movie Playback mode, touch
or pause the movies.
/
to play
2. Sweep to the right or touch
movie; sweep to the left or touch
movie.
to go to the previous
to go to the next
3. While playing movies, touch
forward.
/
to fast rewind/
to reduce
4. Touch
the volume.
5. Touch (
to increase the volume; touch
)to exit.
6. Press YouTube Direct Button to select the existing movies
to upload to YouTube.
Note
When the LCD is idle for a few seconds, the playback function icons will disappear
automatically.
EN
27
Delete Movies
Operation
to go to the Delete option screen.
Display Screen
1. Touch
2. Touch [Yes] to delete the current movie or [No]
to cancel the operation and to exit; touch [All] to
delete all movies.
3. Before all movies are about to be deleted, a
confirmation screen will appear; touch [Yes] to
execute the operation and [No] to cancel the
operation.
Note
• If a memory card has been inserted, you can only delete those movies stored on the card.
• Movies on a written-protected memory card cannot be deleted.
EN
28
Picture Playback
Operation
1. When in the Picture Playback mode, sweep to
the right or touch to go to the previous
Display Screen
picture; sweep to the left or touch
the next picture.
to go to
2. While the picture is selected, press on the
screen as well as go up to enter Magnification
Mode.( The magnification Indicator appears on
the screen)
3. In the Magnification Mode, sweep to the top to
zoom in or to the bottom to zoom out.
4. To navigate the magnified picture, press on
the screen and move as well. (The inner
Magnification Indicator turns red)
5. Press OK Button or sweep to the bottom to exit
the magnification mode.
6. Touch
show.
/
to start or to stop the slide
7. Touch (
)to exit.
Note
When the LCD is idle for a few seconds, the slideshow function icons will disappear
automatically.
EN
29
Delete Picture
Operation
to go to the Delete option screen.
Display Screen
1. Touch
2. Touch [Yes] to delete the current picture or [No]
to cancel the operation and to exit; touch [All] to
delete all pictures.
3. Before all pictures are deleted, a confirmation
screen will appear; touch [Yes] to execute the
operation and [No] to cancel the operation.
Note
• If a memory card has been inserted, you can only delete those pictures stored on the card.
• Pictures on a written-protected memory card cannot be deleted.
EN
30
Section 5
Setting Your Camcorder
Setting Menu
Operation
(on-screen icon) when in Record
Display Screen
1. Touch
Mode. The Record wheel menu will show on the
screen.
2. Scroll and stop on [Setting]. The submenu of
Setting pops up.
3. The Setting submenu contains 6 options for
configuring your camcorder setup. They are
Sound (operation sound), TV, Language, Time
Setting, Format, and Default Setting.
4. Touch
/
on the screen to change
between the pages.
Sound
Enable or disable the keypad tone and the operation sound.
Operation
Display Screen
1. In the Setting submenu, touch [Sound] to enter
the option screen.
2. Touch the desired option.
3. Touch [OK] to validate the setting.
EN
31
TV
Ensure that the appropriate TV standard of your area is selected – either NTSC or PAL.
Wrong TV system setting may cause image flickers.
• NTSC(60Hz): USA, Canada, Japan, South Korea and Taiwan, etc.
• PAL(50Hz): UK, Europe, China, Australia, Singapore and Hong Kong, etc.
Operation
Display Screen
1. In the Setting submenu, touch [TV] to enter the
option screen.
2. Touch the desired option.
3. Touch [OK] to validate the setting.
Language
Use this option to select the language of the user interface.
Operation
Display Screen
1. In the Setting submenu, touch [Language] to
enter the option screen.Touch
/
on the
screen to change between the pages.
2. Touch the desired option.
3. Touch [OK] to validate the setting.
EN
32
Time Setting
Operation
Display Screen
1. In the Setting submenu, touch [Time Setting] on
the screen to go to the Time Setting menu.
2. Touch Year, Month, Day, Hour, or Minute to set.
3. Adjust the numeric value by touching
4. Touch [OK] to validate the settings.
/
.
Format
Yes: Format the built-in memory ( When there is no SD card in the camcorder ) / SD Card (When there
is an SD card in the camcorder).
No: Do not format the built-in memory ( When there is no SD card in the camcorder ) / SD Card (When
there is an SD card in the camcorder).
Operation
Display Screen
1. In the Setting submenu, touch [Format] on the
screen to go to the format confirmation screen
2. Touch [Yes] to execute the operation and [No] to
cancel the operation.
Note
All the data will be erased if the SD card is formatted. Make sure all the data are copied to your
PC before formatting the SD card.
EN
33
Default Setting
To restore the default factory setting, select this option.
Operation
Display Screen
1. In the Setting submenu, touch [Default Setting]
on the screen to go to the Default Setting
confirmation screen.
2. Touch [Yes] to execute the operation and [No] to
cancel the operation.
The following table indicates the camcorder’s default settings
Setting
Default Factory Setting
Resolution
FHD (1080i 60) for Movie
Std(10MP) for Picture
Scene
Auto
Stabilization
Macro Mode
Motion Detection
Slow Motion
Time Lapse
White Balance
Self Timer
ISO
Off
Auto
Off
Off
Off
Auto
Off
Auto
Sound
On
TV
Depends on shipping area
Depends on shipping area
Level 6
Language
Volume
EN
34
Section 6
Viewing Pictures and Movies on TV
Connecting to a High-Definition 16:9(Wide) TV
1. Connect the HDMI cable to your camcorder’s HDMI Out port.
2. Connect the other end of the cable to a television.
3. Set the video input source of your TV to “ HDMI.”
(16:9)
4. Use the buttons to view the stored pictures and movies on the TV.
Operation
On TV
1. Press OK Button to play movies and press it again to
pause.
2. While playing movies, press Right/Left Buttons to fast
forward/rewind and then release the button to stop.
3. Use Up/Down Buttons to adjust the volume.
4. In the Picture Playback mode, use Tele Button to magnify
the picture. To navigate the magnified picture, use
Direction Buttons to navigate the magnified picture. Press
OK Button to exit the magnification mode.
Connecting to a non-high-definition 4:3 TV
1. Connect one end of the AV cable to your camcorder’s AV out port.
2. Connect the other end of the cable to a television.
3. Use direction button to view stored pictures and movie on a TV.
( 4 : 3 )
EN
35
Section 7
Viewing Pictures and Movies on PC
Installing Bundled Software
The CD-ROM supplied with this camcorder contains 3 pieces of software.
• ArcSoft MediaImpression is a user-friendly application that helps you managing your media, burning
your video into DVD, and uploading your videos to YouTube easily.
• ArcSoft MediaConverter is a powerful application that converts multiple video formats into compatible
format with your camcorder.
• Adobe Reader is a popular program that you need to have installed to read the User’s Manual. Many
computer users will find they already have this software installed on their computer.
To install the bundled software:
1. Insert the CD-ROM into your computer’s CD-ROM drive. The autorun screen appears.
2. Click “Install Application Software”. Follow the on-screen instructions to complete the installation.
Note
The detailed information can be found in online help of all the bundled software.
Transferring Pictures or Movies to a Computer
You can transfer pictures or movies stored on your camcorder to a computer and send them in e-mails
to friends or post them on the websites.
To do this you should:
1. Connect the computer and camcorder with the supplied mini USB 2.0 cable. The LED will light up
and blink.
2. After the LED stops blinking, movies and pictures can be found on your computer at “My Computer\
Removable Disk\DCIM\100MEDIA”.
3. Under this folder, you can view, delete, move, or copy any movie/picture you want.
4. Use the bundled ArcSoft application software to edit the movies or pictures.
EN
36
Section 8
Burning the Recorded Clip into a DVD
The bundled software CD contains ArcSoft MediaImpression which can be used to burn movie clips onto
a DVD. You can share this DVD movie with your family or friends by using a regular DVD player.
To create a DVD:
1. Install ArcSoft MediaImpression (Refer to Section 7).
2. Click on Windows [ Start ] g[ (All) Programs ] g[ ArcSoft MediaImpression ].
3. The ArcSoft MediaImpression main screen will appear on your desktop.
4. Click on [ Videos ] .
EN
37
5. The operation screen will appear:
• Select the folder that contains the video files you want to burn.
• Select the files in the display area.
• Click on [Make Movie] at the bottom menu.
6. Click on [Add Media] (
7. Click on [Save/Share].
) to add the files into slide.
EN
38
8. Select [ Burn ] and click on [ Next ] to proceed.
9. Click on [ Start ] to start the VCD/DVD burning.
Note
Please insert a blank, writable VCD or DVD into the CD/DVD Writer before clicking on [Start].
EN
39
Section 9
Uploading Video Files to YouTube
The built-in YouTube Direct application offers you an easy way to upload your video clips to YouTube
instantly. It helps you share them with your family and friends on the YouTube website. Also, the bundled
software, ArcSoft MediaImpression, can be used to upload your video clips to YouTube.
9.1 YouTube Direct
To upload video files marked with
to YouTube:
1. Select the video clips in Movie Playback Mode by pressing YouTube Direct Button
2. Connect the camcorder to your computer by using the supplied USB cable.
.
3. Press YouTube Direct Button
automatically.
on the camcorder to launch the YouTube Direct application
(Before the computer launches YouTube Direct, you have to install the application included in the CD
first.)
EN
40
4. Upload video clips:
1. Press YouTube Direct Button
2. The videos clips marked with
on the camcorder again.
will be uploaded to the website automatically. (You may be asked
to fill in your account information before uploading or you can fill in the information firstly by click on
)
3. Click on “ CANCEL” to stop uploading.
To upload video files selected manually to YouTube:
1. Follow the step 2 and 3 on page 40.
2. On the thumbnail screen, click on the up/down icon to change the pages. Click on the video clips
you want to upload.
3. Click on “ UPLOAD” to start uploading.
EN
41
To playback the video file:
1.Double click on the video clip on the thumbnail screen.
2.Click on the Play/Pause icon
preview screen.
to play/pause. Click on the Return icon
to return to the thumbnail
To setup your account information for YouTube:
1. Click on
to go to the setup screen.
2. Fill in your account information in the blanks. Then click on “Save”.
(If you do not have a account, please sign up on YouTube first.)
EN
42
9.2 ArcSoft MediaImpression
To upload video files to YouTube:
1. Install ArcSoft MediaImpression (Refer to Section 7).
2. Click on Windows [ Start ] g[ (All) Programs ] g[ ArcSoft MediaImpression ].
3. The ArcSoft MediaImpression main screen will appear on your desktop.
4. Click on [ Videos ] .
5. The operation screen will appear:
• Select the folder that contains the video files you want to upload.
• Select the files in the display area.
• Click on [Upload to YouTube] at the bottom menu.
EN
43
6. Fill in your YouTube account information in the blanks, and then click on [Login]
7. Fill in the information of the video clips in the blanks, and then click on [Upload]
EN
44
Section 10
Video File Converter
The bundled software CD contains ArcSoft MediaConverter that features video file converter to convert
multiple video formats into compatible format with your camcorder. In this way, you can convert various
video files formats and playback your favorite movies on your camcorder.
To convert a video file:
1. Install ArcSoft MediaConverter ( Refer to section 7).
2. Click on Windows [ Start ] g[ (All) Programs ] g[ ArcSoft MediaConverter ].
3. The ArcSoft MediaConverter main screen will appear on your desktop.
4. Select [ Profile 1 ].
EN
45
5. Select the video file you want to convert. Then, click on [Open] to convert the file.
6. The converted files will be renamed “ IMAG0001.avi”, “ IMAG0002.avi”,and so on.
7. Rename the converted file to “ IMAGXXXX. avi” before transferring the converted file to your
camcorder. (XXXX should be a four figures,e.g. 0001 to 9999) (Please note that the converted file
names can not be the same as the ones having existed in your camcorder, otherwise the video files
in your camcorder may be overwritten.)
8. Connect your camcorder to PC and copy the converted videos to “My Computer\Removable
Disk\ DCIM\100MEDIA” in your camcorder.(Under the circumstances of within an SD card in the
camcorder and OS of the computer is Windows XP.)
9. After transferring the converted videos to the camcorder, Press Playback Button or press
on
the screen to enjoy your favorite movies.
Note
“ My Computer\Removable Disk” would be different based on OS recognit
EN
46
Section 11
Specifications
Specification
Image sensor
Operation modes
Lens
10 Mega pixel CMOS sensor
Movie record, Picture record
Wide: F2.0 ~ 5.6
Tele: F2.8 ~ 7.8
Focus range
Macro mode: wide:1cm~Infinite( 0.39 inch ~infinit) , tele:60cm~Infinite( 23.4
inch ~infinit)
Auto mode: wide:10cm~Infinite( 3.9 inch ~ infinite) , tele:100cm~Infinite( 39
inch ~ infinite)
Zoom
1X~100X (10X Optical zoom and 10X Digital zoom)
Electronic
Shutter
LCD monitor
Storage media
3”/ 7.6cm touch LCD
Built-in 4GB+128MB memory (partial memory is used for firmware
code);
SD/SDHC card slot support (up to 32GB)
High 4608x3456 (16M pixels)
Standard 3644x2748 (10M pixels)
Low 2048x1536 (3M pixels)
Image resolution
Movie resolution
FHD(1080i 60): 1920X1080i (60fps)
FHD(1080p 30):1920X1080p (30fps)
HD (720p 60): 1208X720p (60fps)
HD(720p 30): 1208X720p (30fps)
VGA(4:3): 640X480p (30fps)
Auto/Manual (Daylight, Fluorescent, Tungsten)
Auto/800/1600/3200
White balance
ISO
Self-timer
Flash
10 seconds delay
Flash Auto/Red-Eye-Reduction/Digital Light/Flash Off
Picture: JPG
File format
Movie: AVI
Image play
PC interface
TV out
Single image/Slideshow
Mini USB 2.0 port
NTSC/PAL selectable, HDMI (up to 1080i60)
Lithium-ion rechargeable battery
122(L) * 67.5(H) * 62.3(W) mm (4.75(L) * 2.63(H) * 2.42(W) inch)
290 g (without battery)
Battery
Dimension
Weight
EN
47
Section 12
Troubleshooting
Troubleshooting
1. If the LCD preview is not clear while shooting, how can the focus be adjusted?
Try to switch between Macro and Auto Mode.
2. The flash is not working.
The battery power is low.
The camcorder is in DC power mode.
3. The files on the memory card do not display smoothly when the LCD shows the “!” marking.
The “!” means the SD card is low speed or is having wrong content inside. The way to solve this
condition is to format SD card by the camcorder instead of a PC (Please refer to the detailed Format
instruction in Section 5).
4. Why is camcorder flash not active when taking pictures?
In the flash auto mode, the camcorder flash fires ONLY when necessary (e.g. in the dark).
5. Why do some of my indoor pictures look blurry and dark?
The camcorder extends picture exposure time under low light/ indoor condition. Keep the camcorder
(and
the target subject) steady for several seconds when taking pictures. The shutter will sound when
pictures are being taken.
6. How do I charge battery?
You must use the supplied AC charger or the USB cable.
The camcorder must be turned OFF; blinking light confirms charging, and the light becomes constant
when the charging has been completed. Then, the light will turn itself off automatically after 5 minutes
(In AC charging Mode).
EN
48
Section 13
Other Information
TOSHIBA Support
Need help?
For the latest driver updates, user’s manuals & FAQ’s please have a look at the
TOSHIBA options & services support page:
computers.toshiba.eu/options-support
Please see
computers.toshiba.eu/options-warranty
for the TOSHIBA hotline numbers.
Operating Environment Conditions
Operating temperature: 5 to 35° C
Operating humidity: 20 to 80 %
(no condensation allowed)
Regulatory Information
CE compliance
This product is CE marked in accordance with the requirements of the applicable EU Directives.
Responsible for CE marking is Toshiba Europe GmbH, Hammfelddamm 8, 41460 Neuss, Germany. A
copy of the official Declaration of Conformity can be obtained from following website:
Working Environment
The Electromagnetic Compliance (EMC) of this product has been verified typically for this product
category for a so called Residential, Commercial & Light Industry Environment. Any other working
environment has not been verified by Toshiba and the use of this product in these working environments
is maybe restricted or cannot be recommended. Possible consequences of the use of this product in non
verified working environments can be: Disturbances of other products or of this product in the nearby
surrounding area with temporarily malfunction or data loss/corruption as result. Example of non verified
working environments and related advices:
Industrial environment (e.g. where a 3-phase 380V mains is being used mainly): Danger of disturbances
EN
49
of this product due to possible strong electromagnetic fields especially near to big machinery or power
units.
Medical environment: The compliance to the Medical Product Directive has not been verified by Toshiba,
therefore this product cannot be used as a medical product without further verification. The use in usual
office environments e.g. in hospitals should be no problem if there is no restriction by the responsible
administration.
Automotive environment: Please search the owner instructions of the related vehicle for advices
regarding the use of this product (category).
Aviation environment: Please follow the instructions of the flight personnel regarding restrictions of
use.
Additional environments not related to EMC
Outdoor use: As a typical home/office equipment this product has no special resistance against ingress
of moisture and is not strong shock proofed.
Explosive atmosphere: The use of this product in such special working environment (Ex) is not
allowed.
REACH
Following information is only valid for EU-member States:
REACH - Compliance Statement
The new European Union (EU) chemical regulation, REACH (Registration, Evaluation, Authorization
and Restriction of Chemicals), entered into force on 1 June 2007.
Toshiba will meet all REACH requirements and is committed to provide our customers with information
about the chemical substances in our products according to REACH regulation.
about the presence in our articles of substances included on the candidate list according to article
59(1) of Regulation (EC) No 1907/2006 („REACH“) in a concentration above 0.1 % weight by weight.
Following information is only valid for EU-member states:
Disposal of products
The crossed out wheeled dust bin symbol indicates that products must be collected
and disposed of separately from household waste. Integrated batteries and
accumulators can be disposed of with the product. They will be separated at the
recycling centres.
The black bar indicates that the product was placed on the market afterAugust 13, 2005. By participating
in separate collection of products and batteries, you will help to assure the proper disposal of products
and batteries and thus help to prevent potential negative consequences for the environment and human
health.
For more detailed information about the collection and recycling programmes available in your country,
shop where you purchased the product.
EN
50
Disposal of batteries and/or accumulators
Thecrossedoutwheeleddustbinsymbolindicatesthatbatteriesand/oraccumulators
must be collected and disposed of separately from household waste.
If the battery or accumulator contains more than the specified values of lead (Pb),
mercury (Hg), and/or cadmium (Cd) defined in the Battery Directive (2006/66/EC),
then the chemical symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd) will
appear below the crossed out wheeled dust bin symbol.
By participating in separate collection of batteries, you will help to assure the proper disposal of products
and batteries and thus help to prevent potential negative consequences for the environment and human
health.
For more detailed information about the collection and recycling programmes available in your country,
shop where you purchased the product.
Additional Information
© 2009 TOSHIBA Europe GmbH. All rights reserved.
TOSHIBA reserves the right to make technical changes. TOSHIBA assumes no liability for damages
incurred directly or indirectly from errors, omissions or discrepancies between this product and the
documentation.
About the battery pack
• Use only batteries recommended by TOSHIBA as replacements. The battery pack is lithium ion
batteries, which can explode if not replaced, used, handled or disposed of properly. Dispose of the
battery as required by local ordinances or regulations.
• Charge the battery pack only in an ambient temperature between 5 and 35 degrees Celsius. Otherwise,
the electrolyte solution might leak, battery pack performance might deteriorate and the battery life
might be shortened.
• Never install or remove the battery pack without first turning off the power and disconnecting the AC
adaptor.
• Use only the product connected to an AC power source or optional TOSHIBA Battery charger to
charge the battery pack. Never attempt to charge the battery pack with any other charger.
EN
51
|
Westcott 2218 User Manual
Weil McLain EGH Series 4 User Manual
Verilux Blender VH01 User Manual
Sony VCT 670 RM User Manual
Sony Handycam DCR DVD91E User Manual
Sony DTC 690 User Manual
Sony D SJ15 User Manual
Sony CDX GT700HD User Manual
Sharp CS 2870 User Manual
Samsung B013420 User Manual