Instruction Manual
Component to VGA Video Converter with Audio
CPNT2VGAA / CPNT2VGAAGB / CPNT2VGAAEU
DE: Bedienungsanleitung - de.startech.com
Front View
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Packaging Contents
• 1 x Component to VGA video converter
• 1 x Power Adapter
• 1 x Instruction Manual
System Requirements
• YPbPr Component video source (i.e. DVR/PVR, DVD player, etc.)
• VGA display device (i.e. monitor, projector, HDTV, etc.)
• Available AC electrical outlet
• RCA Component Video cable
• VGA video cable
*actual product may vary from photos
• Optional: RCA stereo audio cable
• Optional: 3.5mm Audio mini-jack cable
Rear View
Installation
1. Make sure the video source and display device are powered off
before making any connections.
2. Connect the video source to the Input side of the video
converting using RCA component video cables (not included). If
also using audio, connect RCA stereo audio cables (not included)
from the source to the converter.
3. Connect the display device to the video converting using a VGA
video cable (not included). If also using audio, connect a 3.5mm
audio mini-jack cable (not included) from the speakers to the
converter.
4. Connect the included power adapter from an electrical source to
the video converter. The Power LED will light up solid.
5. Turn the display device on, followed by the video source.
Manual Revision: 01/18/2012
|