High Strength
10X Zoom
High-Resolution 10X Vandal-Proof Dome Camera SVD-4300 User’s Manual
SALES NETWORK
SAMSUNG TECHWIN CO., LTD.
145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si,
Gyeonggi-do 462-703, Korea
•
•
•
TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD.
7 Pingchang Rd, Nankai Dist. Tianjin 300190, P.R China
TEL : +86-22-2761-4724(33821) FAX : +86-22-2761-6514
Thank you for purchasing a SAMSUNG CCD CAMERA.
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
TEL : +82-31-740-8137~8139 FAX : +82-31-740-8145
SAMSUNG OPTO-ELECTRONICS UK, LTD.
Samsung House, 1000 Hillswood Drive, Hillswood Business
Park Chertsey, Surrey KT16 OPS
TEL : +44-1932-45-5308 FAX : +44-1932-45-5325
P/No. : Z6806-0750-01B
VAN 06. 07
ENGLISH
Samsung Techwin cares for the environment at all product manufacturing
stages to preserve the environment, and is taking a number of steps to
provide customers with more environment-friendly products.The Eco mark
represents Samsung Techwin s will to create environment-friendly products,
and indicates that the product satisfies the EU RoHS Directive.
Features
A/F 10x Optical Zoom
Day & Night
The built-in SVD-4300 optical zoom lens is a
highly durable component. It features auto
focus, auto iris, and zoom functions.
The camera automatically determines whether
it is night time or day time, selecting operating
mode automatically. The camera operates in
color mode during day light conditions and BW
mode in night conditions for clearer identification.
Warnings & Cautions
This information is provided to ensure your safety and to prevent any losses, financial or
otherwise. Please read it carefully and use the product accordingly.
SSNR (Samsung Super Noise
Reduction)
IP66 Approved / Dust and Rain
Resistant
By using built-in SSNR function manufactured
by SAMSUNG TECHWIN, the amount of low
illuminance noise has been significantly
reduced, and the signal-to-noise ratio (S/N)
as well as horizontal resolution have been
improved, resulting in a clear and sharp
image display even in the dark.
With dust and rain resistant design, the camera
can be installed outside under building eaves or
places that are exposed to the dust and rain.
Warning/Attention/Special Mark Messages
Ignoring this information may result in material loss and/or serious
personal injuries including death.
RS-485 Function
The camera, using a RS-485 communication
can remote control relate to ZOOM/FOCUS
and OSD menu functions.
Indicates “Never Allowed.”
High Sensitivity
Indicates “No Disassembling.”
The built-in high sensitivity COLOR CCD
enables a clear image even in 0.005Lux
(Sens-up, color) or lower illumination.
Sub Monitor Function
The sub monitor function enables easy
adjustment of the camera angle within the
monitoring range during its installation.
Indicates Must Observe.
High Resolution
3-Axis camera mechanism
Featuring 500TV line horizontal resolution in
color mode and 570TV line horizontal resolution
in BW mode, the camera features Sony's
410,000 pixel CCD and captures clean,
noiseless, high-quality images.
The SVD-4300 is especially incredibly flexible to
install with its 3-axis camera construction,
which makes the camera wall or slope mountable.
Miscellaneous Functions
Other miscellaneous functions of the camera
include privacy zone masking, digital zoom, line
lock synchronization(INT/LL), freeze, horizontal
inversion, and user-configured presets.
Co ntents
8
18
21
Precautions
• CAM TITLE
• WHITE BALANCE
• BACKLIGHT
• MOTION DETECTION
• FOCUS
22
23
24
10
11
Components and Accessories
28
33
38
38
• EXPOSURE
• SPECIAL
Overview
• RESET
13
13
14
15
Connection
• EXIT
Connecting To Monitor
Connecting To Power
RS-485 communication control
39
40
42
Troubleshooting
Specification
Dimension
16
Operating Your Camera
Menu Configuration
Menu Setup
16
17
Prec autio ns
Do not install the camera in
extreme temperature conditions.
Do not install or use the camera in an
environment where the humidity is high.
Do not drop the camera or subject
them to physical shocks.
Never keep the camera face to
strong light directly.
Only use the camera under conditions
where temperatures are between
-10˚C and +50˚C. Be especially careful
to provide ventilation when operating
under high temperatures.
It can cause the image quality to be
poor.
It can cause malfunctions to occur.
It can damage the CCD.
Do not expose the camera to
radioactivity.
Do not install the camera under
unstable lighting conditions.
Do not touch the front lens of the
camera.
If it is exposed to radioactivity, For
heated CCD, it will be out of order.
Notes
• If the camera is exposed to spotlight or object reflecting strong light, smear or
blooming may occur.
• Please check that the power satisfies the normal specification before connecting
the camera.
Severe lighting change or flicker can
cause the camera to work improperly.
It is one of the most important parts
of the camera. Be careful not to be
stained by fingerprint.
COLOR CCD CAMERA
User’s Manual
COLOR CCD CAMERA
User’s Manual
8
9
Co m p o nents and Ac c esso ries
Overview
1. SVD-4300
2. Instruction Manual
3. Quick Install Guide
4. Wrench
5. Ø5 Tapping Screws 4EA
6. Template
7. Installation Video Output Cable
COLOR CCD CAMERA
User’s Manual
COLOR CCD CAMERA
User’s Manual
10
11
Overview
Co nnec tio n
Pan Base
Connecting to Monitor
control panning angle of camera
Rotate Base Holding Screw
fix rotated position
Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor.
Rotate Base
control rotating angle of camera
Pan Base Holding Screws (Color : Silver)
fix panned position
Auto Focus 10x Zoom Lens Module.
SET button
To access the main setup menu. Pressing the “SET” button locks the zoom control
functions of these buttons and prompts the main setup menu.
AF button
To activate auto focus just once.
CCTV Camera
Monitor
UP (WIDE button)
To move the arrow indicator to up.(To widen the view : ZOOM OUT)
DOWN(TELE button)
To move the arrow indicator to down (To close in on a far object: ZOOM IN)
LEFT (F-NEAR button)
To move the arrow indicator to left. (To see a near object clearly)
RIGHT (F-FAR button)
To move the arrow indicator to right. (To see a far object clearly)
Video Output Terminal to Monitor
Power Input Jack
• As the connecting method varies with the instruments, refer to the manual
supplied with the instrument.
• If necessary, you can connect the monitor to the REMOTE jack on the back of
your camera.
• Only connect the cable when the power is turned off.
• Set the 75Ω / Hi-Z selection switch as shown below if you have an intermediate
device.
Intermediate
End monitor
Video Output Jack
RS-485 Control Cable
The detailed description refers to p15
Dome Cover
Shield Case
Notes
CCTV Camera
• The zoom postion is saved after 5 seconds when you set zoom function.
COLOR CCD CAMERA
User’s Manual
COLOR CCD CAMERA
User’s Manual
12
13
Co nnec tio n
Connecting to Power
RS-485 communication control
Connecting to RS-485 Control Cable
Use AC 24V / 300mA or DC 12V / 500mA power source.
CONTROL CABLE SPEC
RED (TRX+)
WHITE(TRX-)
RS-485+
RS-485-
Using a RS-485 communication, it will be able to control the ZOOM/FOCUS and
OSD menu at the SAMSUNG TECHWIN System Controller or DVR.
(1) The case which it controls from the PC
Using a RS-485 converter, It connects to RS-485 control cable outside camera
and serial cable
For DC Power Type
EX) SERIAL PORT OF THE PC(COM1) — SERIAL CABLE -- RS-485 CONVERTER
-- RS-485 CONTROL CABLE
• For DC power as the voltage drop according to the length of the cable in the
above table, a camera may malfunction if there is an excessively long cable run.
(2)The case which it controls from the DVR or System Controller
It connects the RS-485 control cable in the connection terminal of 485 control
boards which are connected with the DVR or System Controller.
Resistance of copper wire [at 20C˚ (68˚F)]
2
Copper wire size (AWG)
Resistance ( Ω / m)
Voltage Drop (V/m)
#24(0.22mm )
0.078
#22(0.33mm2)
0.050
#20(0.52mm2)
0.030
#18(0.83mm2)
0.018
485 CONTROL BOARD CONNECTION TERMINAL
(+)CONNECTION TERMINAL
RS-485 CONTROL CABLE
RED (TRX+)
0.028
0.018
0.011
0.006
* Voltage for camera operation: 12V DC ±10%
* Voltage drops in the above table are variable according to types of cable manufacturer.
(-)CONNECTION TERMINAL
WHITE(TRX-)
Notes
Notes
• Be sure to connect power only after all the installation is complete.
• Note that AC or DC adaptor is not supplied with camera.
• Use the UL listed, class 2 power transformer of AC 24V adaptor.
• Ground should be connected to the GND terminal.
• When you construct external control systems for a camera control, please use to
the SAMSUNG TECHWIN PROTOCOL or PELCO-D PROTOCOL.
• When you connecting to RS-485 control cable, please peel off the outer skin inside
the RS-485 control cable.
COLOR CCD CAMERA
User’s Manual
COLOR CCD CAMERA
User’s Manual
14
15
Op erating Yo ur Cam era
Menu Configuration
Menu Setup
Use the six buttons on back of the camera.
MAIN SETUP MENU
SET button
AF button
UP button
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
CAM TITLE
OFF
ON
•
•
WHITE BALANCE
BACKLIGHT
ATW(OUTDOOR)
OFF
AWC SET
LOW
MANUAL
MIDDLE
HIGH
•
•
•
•
•
•
•
MOTION DET
FOCUS
OFF
ON
LEFT button
RIGHT button
DOWN button
MODE
ZOOM TRK
D-ZOOM
ZOOM POS INIT
END
ZOOM SPEED
DISP ZOOM MAG
LENS INIT
BRIGHTNESS
AGC
1. Press the SET button to access the main setup mode.
• Main setup menu is displayed on the monitor screen.
MAIN SETUP
•
•
EXPOSURE
SPECIAL
IRIS
SHUTTER
SENS-UP
CAM TITLE
WHIET BAL
BACKLIGHT
MOTION DET
FOCUS
OFF
ATW
OFF
OFF
SSNR
END
•
•
•
•
USER PRESET
SYNC
PRIVACY
DAY/NIGHT
IMAGE ADJ
COMM ADJ
EXPOSURE
SPECIAL
RESET
END
RESET
EXIT
EXIT
2. Select the desired feature using the UP or DOWN button.
• Each pressing of the UP or DOWN button moves the indicator to the next
or previous feature.
• Move the arrow indicator to the desired feature item.
COLOR CCD CAMERA
User’s Manual
COLOR CCD CAMERA
User’s Manual
16
17
Op erating Yo ur Cam era
3. Press SET button.
MAIN SETUP
CAM TITLE
WHIET BAL
BACKLIGHT
MOTION DET
FOCUS
OFF
ATW
OFF
OFF
Change the status using the
LEFT or RIGHT button.
Select feature using the UP
or DOWN button.
EXPOSURE
SPECIAL
RESET
EXIT
3. Change the status of the selected feature using the LEFT or RIGHT button.
4. When completed, move the arrow indicator to 'EXIT' and press the SET button.
4. You can enter up to 15 characters.
Move the cursor to the character entry field using the LEFT or RIGHT
button.
Notes
Use UP, DOWN, LEFT, and RIGHT buttons to select a desired character.
• Features marked with a have an accessible submenu.
• Access the submenu by pressing the SET button.
CAM TITLE
Use this feature to designate a name for the camera, which will display on the
monitor screen.
1. Press the SET button to display the main setup menu and move the arrow
indicator to 'CAM TITLE' using the UP or DOWN button.
2. Set 'CAM TITLE' to 'ON' using the LEFT or RIGHT button.
Press the SET button to confirm selection of the blinking character. The
character is then saved, and the cursor in the entry field moves to the
next position.
Notes
Repeat steps through until the desired name has been entered.
MAIN SETUP
• If the CAM TITLE feature is set to 'OFF',
the name will not displayed in the monitor.
CAM TITLE
WHIET BAL
BACKLIGHT
MOTION DET
FOCUS
OFF
ATW
OFF
OFF
Notes
• Correcting Mistakes
EXPOSURE
SPECIAL
RESET
Move the cursor to 'CLR' and press the SET button to clear the entire entry.
To modify one character, use or to position the cursor above the character
to be modified and click the SET button after selecting the character to enter.
EXIT
COLOR CCD CAMERA
User’s Manual
COLOR CCD CAMERA
User’s Manual
18
19
Op erating Yo ur Cam era
5. Select on screen position of the CAM TITLE.
Move the cursor to 'POS' and press SET button.
WHITE BALANCE CONTROL
Your camera provides three 'WHITE BAL' control modes for your choosing in
adjusting the white balance.
1. Press the SET button to access the main setup menu and move the indicator
to 'WHITE BAL' using the UP or DOWN button.
2. Set 'WHITE BAL' using the LEFT or RIGHT button.
MAIN SETUP
CAM TITLE
WHIET BAL
BACKLIGHT
MOTION DET
FOCUS
OFF
ATW
OFF
OFF
The CAM TITLE is displayed on the top-left of the monitor screen.
(Default position)
FRONT DOOR
EXPOSURE
The three white balance control modes are as follows :
ATW(Auto Tracking White Balance):
to Locate, then SET
• OUTDOOR: This mode can be used within the color temperature range 1800~10500˚K
(Ex: fluorescent light, outdoor, sodium vapor lamp or inside tunnels)
• INDOOR : This mode can be used within the color temperature range 3000K~10500˚K.
Select the position by using the 4-directional buttons, then press the SET
button to confirm the position.
AWC(Auto White balance Control):
The white balance is automatically adjusted in a specific environment. In order to
obtain the best result, press the SET button while the camera focuses on white
paper. If the environment including the light source is changed, you have to adjust
the white balance again.
FRONT DOOR
Manual:
To fine adjust, select the Manual mode. You can increase or decrease the red or
blue factor while monitoring the difference on the screen. Set to 'MANUAL' mode
and press the SET button. Increase or decrease the value for red(R-Gain) and
blue(B-Gain), watching the color of the picture, and press the SET button when you
obtain the best color.
6. When completed, move the cursor to 'END' and press SET button.
COLOR CCD CAMERA
User’s Manual
COLOR CCD CAMERA
User’s Manual
20
21
Op erating Yo ur Cam era
Notes
MOTION DETECTION
• Proper White Balance may not be obtained under the following conditions.
When the scene contains mostly high color temperature object, such as a blue
sky or sunset.
This product has a feature that allows you to observe movements of objects in
4 different areas on the screen, and the words ‘MOTION DETECTED’ appear on
the screen when movement is detected; hence a single individual can conduct
supervision efficiently. The camera detects an object’s movement by sensing
disparity of outline, and level of brightness and color.
When the scene is dim.
If your camera directly faces a fluorescent lamp or is used in an environment of
varying lighting conditions.
•Please press the SETUP button.
-OFF: MOTION DETECTION mode is cancelled.
-ON: Any motion in the selected areas is observed.
•Please press the SETUP button.
BACKLIGHT
-OFF: MOTION DETECTION mode is cancelled.
-ON: Any motion in the selected areas is observed.
•Please select the area you wish to observe from the 4 areas in AREA SEL mode.
•Please select ON mode for the chosen area.
•Please adjust the size of the area to be observed by using the UP, DOWN, LEFT
or RIGHT button.
When there is a strong backlight behind the object, clear images of the background
as well as the object can still be obtained by using the BACKLIGHT function.
1. Please position the arrow to point to 'BACKLIGHT' on the SETUP menu by
using the UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT
button.
•Please press the SETUP button to save changes and complete the setting.
MAIN SETUP
CAM TITLE
WHIET BAL
BACKLIGHT
MOTION DET
FOCUS
OFF
ATW
OFF
OFF
Notes
Tips on Using the Motion Detection Feature
• The feature may not function properly under flickering light conditions.
• The camera interprets sudden changes in lighting and subsequent change in
brightness of an object as motion.
HIGH/MIDDLE/LOW: You can adjust the sensitivity of Backlight Compensation.
• With the feature enabled, other algorithms may require additional time to operate
than usual.
OFF: BACKLIGHT function does not operate.
• This system does not guarantee prevention of fire or theft. The manufacturer
shall not be held responsible for any accident or damage incurred.
Backlight ON
Backlight OFF
COLOR CCD CAMERA
User’s Manual
COLOR CCD CAMERA
User’s Manual
22
23
Op erating Yo ur Cam era
•ONE PUSH : Focus is automatically adjusted just once,
after zoom position is changed. Select '
ONE PUSH' and press the SET button to
confirm. Increase or decrease optical
FOCUS
MAIN SETUP
CAM TITLE
WHIET BAL
BACKLIGHT
MOTION DET
FOCUS
OFF
ATW
OFF
OFF
zoom (ZOOM) or digital zoom (D-ZOOM)
positions using the directional buttons
while verifying the changes on screen. Press the SET button once
desired image quality is obtained.
•MANUAL : Select 'MANUAL' and press the SET button
to confirm. Increase or decrease optical zoom
(ZOOM) or digital zoom (D-ZOOM) positions
using the directional buttons while verifying
EXPOSURE
SPECIAL
1. Press the SET button to access the main setup manu and then position the
indicator over FOCUS using the UP or DOWN button.
the changes on screen. Press the SET button
once desired image quality is obtained. Focus
can be manually adjusted, independent of moving zoom.
2. Press the SET button.
MODE: You can select the most suitable zoom mode. Move the arrow indicator to
ZOOM TRK: You can select to use ‘ZOOM TRK’. Move the arrow indicator to ‘ZOOM
TRK’ using UP or DOWN button. Set ‘ZOOM TRK’ to on using LEFT or
RIGHT button.
‘MODE’ using UP or DOWN button.
FOCUS SETUP
FOCUS SETUP
MODE
AUTO
ON
FAST
OFF
ZOOM TRK
ZOOM SPEED
D-ZOOM
MODE
AUTO
ON
ZOOM TRK
ZOOM SPEED
FAST
DISP ZOOM MAG OFF
ZOOM SPEED: Configure zoom tracing speed using this feature. Position the indicator
over 'ZOOM SPEED' using the UP or DOWN button and then set to
desired mode using the LEFT or RIGHT button.
•AUTO : Select AUTO and press the SET button to confirm. Increase or decrease
optical zoom (ZOOM) or digital zoom (D-
ZOOM) positions using the UP or DOWN
button while verifying the changes on
screen. Enabling D-ZOOM (ON) means that
digital zoom will activate once optical zoom
ends. Focus is automatically adjusted with
moving zoom.
FOCUS SETUP
MODE
AUTO
ON
ZOOM TRK
ZOOM SPEED
D-ZOOM
FAST
OFF
COLOR CCD CAMERA
User’s Manual
COLOR CCD CAMERA
User’s Manual
24
25
Op erating Yo ur Cam era
•FAST: To move zoom fast.
•SLOW: To move zoom slowly.
ZOOM POS INIT: Configure zoom position using this feature. Position the
indicator ove 'ZOOM POS INIT' using the LEFT or RIGHT button.
Notes
FOCUS SETUP
• The 'ZOOM SPEED' mode cannot be used if 'MODE' is set to 'AUTO' and 'ZOOM
TRK' is 'ON'.
MODE
AUTO
ON
FAST
OFF
ZOOM TRK
ZOOM SPEED
D-ZOOM
D-ZOOM: Configure magnification limit from x2~x10 using this feature. Position the
indicator over 'D-ZOOM' using the UP or DOWN button. Set 'D-ZOOM' to
'ON' and press the SET button to confirm.
DISP ZOOM MAG OFF
ZOOM POS INIT ON
FOCUS SETUP
LENS INIT
OFF
MODE
AUTO
ON
FAST
ON
ZOOM TRK
ZOOM SPEED
D-ZOOM
Notes
• Preset setting has priority over a ZOOM POS INIT setting.
DISP ZOOM MAG OFF
· Set 'ZOOM LIMIT' to the desired level using the LEFT or
RIGHT button.
LENS INIT : Use this feature to initialize the lens(1x, WIDE). Position the indicator
over LENS INIT. using the UP or DOWN button. Press the SET button
to confirm.
FOCUS SETUP
MODE
AUTO
ON
FAST
OFF
DISP ZOOM MAG: Use this feature to display the current zoom magnification level on
screen. Position the indicator over 'DISP ZOOM MAG' using the UP
ZOOM TRK
ZOOM SPEED
D-ZOOM
or DOWN button. Then set to ON using the LEFT or RIGHT button.
FOCUS SETUP
DISP ZOOM MAG OFF
ZOOM POS INIT OFF
MODE
AUTO
ON
FAST
OFF
ZOOM TRK
ZOOM SPEED
D-ZOOM
LENS INIT
END
ON
DISP ZOOM MAG ON
END: To revert to the main setup menu.
COLOR CCD CAMERA
User’s Manual
COLOR CCD CAMERA
User’s Manual
26
27
Op erating Yo ur Cam era
IRIS: Set 'IRIS' to 'AUTO' or 'MANUAL'. Position the indicator over 'IRIS' using the UP
EXPOSURE
or DOWN button and then select the desired iris mode using the LEFT or RIGHT
button.
EXPOSURE SETUP
EXPOSURE SETUP
BRIGHTNESS
IRIS
25.......
AUTO
BRIGHTNESS
IRIS
25.......
AUTO
SHUTTER
AGC
---
SHUTTER
AGC
---
NORMAL
NORMAL
LOW
SSNR
•AUTO: The iris is automatically activated upon illumination.
SENS-UP
END
OFF
•MANUAL: Manual iris configuration. Set 'IRIS' to 'MANUAL' using the LEFT or
RIGHT button and then press the SET button. Increase or decrease iris
level using the LEFT or RIGHT button while verifying the changes on screen.
1. Press the SET button to access the main setup menu and then position the
indicator over 'EXPOSURE' using the UP or DOWN button.
2. Press the SET button to confirm.
BRIGHTNESS: Use this feature to adjust image brightness. Position the
indicator over 'BRIGHTNESS' using the UP or DOWN button.
Then increase or decrease brightness level using the LEFT or
RIGHT button while verifying the changes on screen. Set END
once desired level is obtained.
SHUTTER : Control image brightness by adjusting shutter speed.
EXPOSURE SETUP
1. Position the indicator over 'SHUTTER' using the UP or DOWN button. Then select
the desired shutter mode (A.FLK, ESC, MANUAL) using the LEFT or RIGHT button.
BRIGHTNESS
IRIS
25.......
AUTO
EXPOSURE SETUP
SHUTTER
AGC
---
BRIGHTNESS
IRIS
25.......
AUTO
NORMAL
LOW
SSNR
SHUTTER
AGC
---
SENS-UP
END
OFF
NORMAL
LOW
SSNR
COLOR CCD CAMERA
User’s Manual
COLOR CCD CAMERA
User’s Manual
28
29
Op erating Yo ur Cam era
•A.FLK (NTSC: 1/100, PAL: 1/120): Flicker-free mode
•ESC: Automatic shutter speed setting (optimal)
•MANUAL: Manual shutter speed setting
AGC (Auto Gain Control): For brighter images.
1. Position the indicator over 'AGC' using the UP or DOWN button.
2. Set 'AGC' to the desired mode using the LEFT or RIGHT button.
• HIGH
• NORMAL : Normal range fain value adjustment.
• OFF : Disabled
: Wide range gain value adjustment
2. If you choose ‘MANUAL’, select the optimal shutter speed.
· In MANUAL mode, the optimal shutter speed needs to be designated. Select from 1/60
to 1/120,000 (NTSC) or from 1/50 to 1/120,000 (PAL).
* 'Sens-Up' mode can be configured manually (2x to 128x).
EXPOSURE SETUP
BRIGHTNESS 25.......
IRIS
· Verify changes made to the shutter speed by referencing to changes in on screen
brightness.
AUTO
---
SHUTTER
AGC
NORMAL
LOW
SSNR
SENS-UP
OFF
SSNR(Samsung Super Noise Reduction): On screen noise reduction.
1. Position the indicator over 'SSNR' using the UP or DOWN button.
3. Press the SET button to complete.
2. Set 'SSNR' to the desired mode using the LEFT or RIGHT button.
• LOW : Low noise reduction
• MIDDLE : Medium noise reduction
Notes
• HIGH : High noise reduction
• Image may become unstable if the camera is set to 'ESC' mode and faces a strong
fluorescent light.
• OFF
: Disabled
• Under 'ESC' mode, the brightness can be adjusted using the LEFT or RIGHT button.
• The WDR feature is not available under MANUAL mode.
EXPOSURE SETUP
BRIGHTNESS 25.......
• Sens-up is disabled under 'MANUAL' or 'A.FLK' mode.
IRIS
AUTO
---
SHUTTER
AGC
NORMAL
LOW
SSNR
SENS-UP
OFF
COLOR CCD CAMERA
User’s Manual
COLOR CCD CAMERA
User’s Manual
30
31
Op erating Yo ur Cam era
Notes
SPECIAL
• Changing 'AGC' setting from NORMAL to HIGH results in greater sensitivity, as well
as on screen noise.
SPECIAL SETUP
• Setting 'AGC' to OFF locks 'SSNR' configuration.
USER PRESET
OFF
PRIVACY
DAY/NIGHT
SYNC
OFF
COLOR
INT
SENS-UP : This feature ensures clear images at night or under low lighting
conditions.
COMM ADJ
IMAGE ADJ
END
1. Position the indicator over 'SENS-UP' using the UP or DOWN button.
2. Set 'SENS-UP' to the desired mode using the LEFT or RIGHT button.
• AUTO : Select this mode for use in night time or under low lighting conditions.
• OFF : Disabled
1. Press the SET button to access the main setup menu and then position the
indicator over 'SPECIAL' using the UP or DOWN button.
2. Press the SET button to confirm.
EXPOSURE SETUP
BRIGHTNESS
IRIS
25.......
AUTO
USER PRESET:
SHUTTER
AGC
---
Preset user-designated configurations using this feature. Position the indicator
over 'USER PRESET' using the UP or DOWN button and then set to 'ON' using the
LEFT or RIGHT button. Press the SET button to confirm.
NORMAL
LOW
SSNR
SENS-UP
END
OFF
SPECIAL SETUP
USER PRESET
PRIVACY
DAY/NIGHT
SYNC
OFF
OFF
Notes
COLOR
INT
• Once 'AUTO' mode is set, the user can configure Sens-Up limit by increasing
/decreasing the shutter speed (e.g.: x2,...,x32, x64,..., x128).
COMM ADJ
IMAGE ADJ
END
• Enabling Sens-Up increases camera sensitivity and may result in additional noise
and/or other phenomenons. This is normal.
COLOR CCD CAMERA
User’s Manual
COLOR CCD CAMERA
User’s Manual
32
33
Op erating Yo ur Cam era
• PRESET NO : Up to eight different preset configurations are supported.
• PRESET CLEAR: Clear configured preset.
USER PRESET SETUP
USER PRESET SETUP
PRESET NO.
NO. 1
OFF
PRESET NO.
PRESET MODE
PRESET SAVE
PRESET CLEAR
END
NO. 1
OFF
PRESET MODE
PRESET SAVE
PRESET CLEAR
END
PRESET DEFINED
PRESET DEFINED
• END: Revert to the SPECIAL SETUP menu.
• PRESET MODE: Configure initial settings under FOCUS, EXPOSURE, etc.
USER PRESET SETUP
PRESET NO.
NO. 1
OFF
PRESET MODE
PRESET SAVE
PRESET CLEAR
END
PRESET DEFINED
• PRESET SAVE: Save configured preset.
USER PRESET SETUP
PRIVACY: Mask privacy area using this feature. The mask area expand/contract
PRESET NO.
NO. 1
OFF
upon the zoom position.
PRESET MODE
PRESET SAVE
PRESET CLEAR
END
SPECIAL SETUP
USER PRESET
PRIVACY
OFF
OFF
DAY/NIGHT
SYNC
COLOR
INT
PRESET DEFINED
COMM ADJ
COLOR CCD CAMERA
User’s Manual
COLOR CCD CAMERA
User’s Manual
34
35
Op erating Yo ur Cam era
• GROUP SEL : Choose up to eight groups. Each group can consist of four mask
SYNC : Two synchronization modes are available INTERNAL and EXTERNAL LINE-LOCK.
In LINE-LOCK mode, it synchronizes the camera’s video out signal to the external
SYNC signal.
areas.
• AREA SEL
: Configure eight mask areas.
• AREA MODE : Mask area display.
SPECIAL SETUP
• MASK TONE : Adjust desired mask color level.
USER PRESET
PRIVACY
OFF
OFF
• TOP
: To move the mask area up.
: To move the mask area down.
: To move the mask area left.
: To move the mask area right.
• BOTTOM
• LEFT
DAY/NIGHT
SYNC
COLOR
INT
COMM ADJ
IMAGE ADJ
• RIGHT
DAY/NIGHT: Select from COLOR, BW or AUTO modes.
• INT : Internal synchronization
• LL : External line-lock synchronization
SPECIAL SETUP
· If you choose ‘LL’, you can adjust the desired phase.
Press the SET button.
· You can adjust the desired phase from 0 to 359.
USER PRESET
PRIVACY
DAY/NIGHT
SYNC
OFF
OFF
COLOR
INT
COMM ADJ
IMAGE ADJ
END
Notes
• For NTSC models, the line-lock mode can be used if the external SYNC signal
frequency is at 60Hz.
• For PAL models, the line-lock mode can be used if the external SYNC signal
frequency is at 50Hz.
• COLOR : Color mode.
• B/W : BW mode.
• AUTO1, 2 : The camera automatically detects lighting conditions and selects the
mode accordingly. Auto 1 mode is switched to IR Cut Filter more
lightning conditions than Auto 2.
COMM ADJ: Use this feature to select communication
protocol . Position the indicator over
'COMMUNICATION' using the UP or
DOWN button.
Notes
• When selecting AUTO2 mode, the AGC is fixed at HIGH mode.
COLOR CCD CAMERA
User’s Manual
COLOR CCD CAMERA
User’s Manual
36
37
Op erating Yo ur Cam era
Tro ub lesho o ting
• CAM ID : Assign ID number to the camera. It is restricted available to set ID from
Refer to the following table if you are experiencing trouble with your camera.
Contact an authorized technician if the table does not provide you with a
solution to the trouble.
1 to 255.
• DISP CAM ID: Displays camera ID on top left corner of the screen.
• BAUD RATE : Configure baud rate from 9600, 19200, 38400, 57600bps.
Problem
No display
Solution
• UART MODE : Configure parity bit to NONE, EVEN, or ODD. Data bit is set to 8bit,
and stop bit to 1bit. Set the UART MODE to EVEN if using the
Remote Controller.
• Check the power cable and the wiring between the
camera and the monitor.
• Ensure proper video cable connection (Video Out
Jack).
• RET PKT
• END
: Used to transfer a packet.
Dim display
Dark display
• The lens could be dirty. Clean with a soft, clean
piece of cloth.
• Adjust monitor settings.
• Adjust camera position if exposed to a strong light
source.
IMAGE ADJ: Includes image quality or special function
factors.
• Adjust the monitor's contrast level.
• Set the intermediate device, if in use, to 75Ω/ Hi-z
(refer to p.13).
• FREEZE: Use this feature to freeze capture an image.
• H-REV: Use this feature to horizontally inverse the screen.
• V-REV: Use this feature to vertically inverse the screen.
• Check the power source for compliance with
specifications.
The camera is not functioning
properly and its surface is hot
• SHARPNESS : Increasing this value sharpens object edges. Too high of a setting,
however, produces noise and may obscure the image.
Motion Detection
• Ensure that the feature is set to ON.
• COLOR AGAIN : Adjusting this value affects the chroma level only; the burst level is
feature is not active.
unaffected.
END: evert back to the USER PRESET menu.
Uneven colors
Flickering
• Adjust and configure WHITE BAL.
• The camera may be facing the sun or a fluorescent
light. Adjust the position of the camera.
RESET
Can't select LL mode
• The camera may be connected to a DC power
source. Connect to an AC power source.
To reset your camera to factory default condition.
EXIT
LL is not function
properly.
• Check external SYNC signal frequency (should be
60Hz for NTSC, 50Hz for PAL).
To finish setup menu.
COLOR CCD CAMERA
User’s Manual
COLOR CCD CAMERA
User’s Manual
38
39
Sp ec ific atio ns
SVD-4300N
SVD-4300P
SVD-4300N
SVD-4300P
Communication
RS485 External Control(TRX+,TRX-) 9600,19200, 38400 and 57600bps
Input Voltage
Input Current
AC24V(±10%), DC 12V(±10%)
P
O
W
E
290mA(Steady-state)
selectable
460mA(Zoom, Focus, Day&night motor operating)
SAMSUNG TECHWIN PROTOCOL AVAILABLE
PELCO-D PROTOCOL AVAILABLE
E
L
E
C.
Power Consumption DC12V/ AC24V - 3.5W Normal,
- 5.5W Max(Zoom, Focus, Day&Night motor operating)
1/4 inch, Interline Transfer CCD
R
Privacy Function
FLIP
ON/OFF(32Zones, It consists of 8Group 4Programmable Zone per Screen)
Vertical, Horizontal, Vertical-Horizontal, OFF Selectable
8 Positions
Size
C
C
D
Total Pixels
811(H) x 508(V)
768(H) x 494(V)
10X, f=3.8 to 38.0mm(F1.8)
795(H) x 596(V)
Preset
Effective Pixels
Optics
752(H) x 582(V)
Operating
-10˚C to +50˚C / 20% to 80% RH
O
P
T
I
Temperature/Humidity
Dimension
Min. Focus Distance
D. ZOOM
1,500mm
Ø150 x 130mm(H)
1.4 kg
OFF/ON (X2 ~ X10)
H : Appr. 51.2˚(Wide) to 5.58˚(Tele)/V : Appr. 39.3˚(Wide) to 4.27˚(Tele)
2:1 Interlace
C
S
Weight
Angle Field of view
Scanning System
Synchronization
Frequency
S
y
Internal / Line-Lock
n
c.
H: 15.734KHz / V: 59.94Hz
H: 15.625KHz / V : 50.00Hz
Resolution
500 TV Lines(Min.) : Color (WIDE) / 570 TV Lines(Min.) : B/W (WIDE)
CVBS : 1.0Vp-p/75Ω(VBS EXT)
Video Output
S/N (Y signal)
Min. Illumination
Backlight Compensation
Day & Night
50 dB (AGC Off, Weight ON)
LOW/MIDDLE/HIGH/OFF Selectable
Auto1, Auto2, COLOR, B/W(ICR)
Gain Control
White Balance
Normal, High, OFF Selectable
ATW (INDOOR(3,000K~10,500K), OUTDOOR (1,800K~10,500K))/AWC/MANUAL
E
L
E
C.
AUTO (X128~1/60sec~1/120,000sec) AUTO (X128~1/50sec~ 1/120,000sec )
Electronic shutter
speed
Sens-up and Sens-up Limit is
selectable, Flickerless
Sens-up and Sens-up Limit is
selectable, Flickerless
O.S.D
Built-In
Motion Detection
SSNR
ON/OFF(4 Programmable Zone per Screen)
Low, Middle, High, Off
Focus
Auto / Manual / One push
Zoom Movement Speed
IRIS Control
Lens Initialize
Camera Title
1.67sec : Wide to Tele
1.75sec : Wide to Tele
Auto, Manual
Built-In
OFF/ON (Displayed 15 characters)
COLOR CCD CAMERA
User’s Manual
COLOR CCD CAMERA
User’s Manual
40
41
DECLARATION OF CONFORMITY
Dim ensio n
Application of Council Directive(s)
89 / 336 / EEC
Ø 148mm
Manufacturer's Name
Manufacturer's Address
SAMSUNG TECHWIN CO., LTD
SAMSUNG TECHWIN CO., LTD
42, SUNGJU-DONG CHANGWON-CITY,
KYUNGNAM, KOREA, 641-716
European Representative Name
European Representative Address
Equipment Type/Environment
Model Name
126mm
CCTV Camera
SVD-4300P
Beginning Serial NO.
S6700001
Year of Manufacture
2006. 7. 1
Conformance to
EN 50081-1 : 1992
EMC-Directive 89/336 EEC and 92/31/EEC
EN 50130-4 : 1996
85mm
We, the undersigned, hereby declare that the equipment specified above conforms
to the above Directive(s).
83.5mm
Manufacturer SAMSUNG TECHWIN CO., LTD
Signature
Legal Representative in Europe
Signature
Full Name
Position
Place
Full Name
Position
Place
YOUNG TAEK SON
QUALITY CONTROL MANAGER
CHANGWON, KOREA
2006. 7. 1
85mm
Date
Date
COLOR CCD CAMERA
User’s Manual
42
|