MPK-P1
SERVICE MANUAL
US Model
Canadian Model
AEP Model
Ver 1.0 2000.10
Main Feature
SPECIFICATIONS
Material
Plastic (PC, ABS), stainless steel, glass
Useable at a depth as deep as 30 meters (98 feet) underwater.
Water-resistance O-ring, buckle
Pressure-resistance To a depth of 30 m (98 feet) underwater
Switches that can be externally operated
For instructions on using your digital still camera with this pack,
refer to the operating instructions of the digital still camera.
This marine pack MPK-P1 is exclusively for use with the Sony
Digital Still Camera DSC-P1, enabling the digital still camera to
be used in the rain or at the beach as it is water- and moisture-
resistant.
Power, mode, shutter, zoom, flash, macro, control
Dimension
Approx. 150 x 80 x 86 mm (6 x 3 1/4 x 3 1/2 inches)
(w / h / d)
Mass
Approx. 300 g (11 oz) (marine pack only)
Supplied accessories
Neck strap (1)
Grease (1)
Anti-fogging lens solution (1)
Operating Instructions (1)
Notice
• Before using the digital still camera underwater, first take the
marine pack to a depth of about 1 m (3.3 feet) and check that
the digital still camera is operating properly and that the marine
pack is not leaking, then commence your dive.
Design and specifications subject to change without notice.
• In the unlikely event that a malfunction of the marine pack causes
damage due to water leakage, Sony does not guarantee agaist
damages to the equipment contained in it (digital still camera,
battery, etc.) and the recorded contents, nor expenses entailed
in the photography.
MARINE PACK
|