2-887-134-11(1)
Operating Guide
DCR-SR40/SR60/SR80
Also refer to “Handycam Handbook” (PDF)
By referring to “Handycam Handbook” (PDF)
contained in the supplied CD-ROM, you can find
more detailed information on how to use the
camcorder.
Additional information on this product and
answers to frequently asked questions can be
found at our Customer Support Website.
Printed on 100% recycled paper using
VOC (Volatile Organic Compound)-free
vegetable oil based ink.
© 2006 Sony Corporation
Printed in Japan
IMPORTANT
SAFEGUARDS
For your protection, please read these safety
instructions completely before operating
the appliance, and keep this manual for
future reference.
WARNING
To reduce fire or shock hazard, do
not expose the unit to rain or
moisture.
Carefully observe all warnings, precautions
and instructions on the appliance, or the one
described in the operating instructions and
adhere to them.
Use
Power Sources
This set should be operated only from the type of
power source indicated on the marking label. If
you are not sure of the type of electrical power
supplied to your home, consult your dealer or
local power company. For those sets designed to
operate from battery power, or other sources, refer
to the operating instructions.
This symbol is intended to alert
the user to the presence of
uninsulated “dangerous
voltage” within the product’s
enclosure that may be of
sufficient magnitude to
constitute a risk of electric
shock to persons.
Polarization
This set may be equipped with a polarized ac
power cord plug (a plug having one blade wider
than the other).
This plug will fit into the power outlet only one
way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact
your electrician to have a suitable outlet installed.
Do not defeat the safety purpose of the polarized
plug by forcing it in.
This symbol is intended to alert
the user to the presence of
important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
Overloading
Do not overload wall outlets, extension cords or
convenience receptacles beyond their capacity,
since this can result in fire or electric shock.
Object and Liquid Entry
Never push objects of any kind into the set
through openings as they may touch dangerous
voltage points or short out parts that could result
in a fire or electric shock. Never spill liquid of any
kind on the set.
Attachments
Do not use attachments not recommended by the
manufacturer, as they may cause hazards.
2
long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system.
This will prevent damage to the set due to
lightning and power-line surges.
Cleaning
Unplug the set from the wall outlet before
cleaning or polishing it. Do not use liquid cleaners
or aerosol cleaners. Use a cloth lightly dampened
with water for cleaning the exterior of the set.
Service
Installation
Damage Requiring Service
Unplug the set from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
– When the power cord or plug is damaged or
frayed.
– If liquid has been spilled or objects have fallen
into the set.
– If the set has been exposed to rain or water.
– If the set has been subject to excessive shock by
being dropped, or the cabinet has been
damaged.
– If the set does not operate normally when
following the operating instructions. Adjust
only those controls that are specified in the
operating instructions. Improper adjustment of
other controls may result in damage and will
often require extensive work by a qualified
technician to restore the set to normal operation.
Water and Moisture
Do not use power-line operated sets near water –
for example, near a bathtub, washbowl, kitchen
sink, or laundry tub, in a wet basement, or near a
swimming pool, etc.
Power-Cord Protection
Route the power cord so that it is not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to the
plugs, receptacles, and the point where the cord
exits from the appliance.
Accessories
Do not place the set on an unstable cart, stand,
tripod, bracket, or table. The set may fall, causing
serious injury to a child or an adult, and serious
damage to the set. Use only a cart, stand, tripod,
bracket, or table recommended by the
manufacturer.
– When the set exhibits a distinct change in
performance – this indicates a need for service.
Ventilation
Servicing
The slots and openings in the cabinet are provided
for necessary ventilation. To ensure reliable
operation of the set, and to protect it from
overheating, these slots and openings must never
be blocked or covered.
Do not attempt to service the set yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
Replacement parts
– Never cover the slots and openings with a cloth
or other materials.
– Never block the slots and openings by placing
the set on a bed, sofa, rug, or other similar
surface.
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer that have the same
characteristics as the original parts.
– Never place the set in a confined space, such as
a bookcase, or built-in cabinet, unless proper
ventilation is provided.
– Do not place the set near or over a radiator or
heat register, or where it is exposed to direct
sunlight.
Unauthorized substitutions may result in fire,
electric shock, or other hazards.
Safety Check
Upon completion of any service or repairs to the
set, ask the service technician to perform routine
safety checks (as specified by the manufacturer)
to determine that the set is in safe operating
condition.
Lightning
For added protection for this set during a lightning
storm, or when it is left unattended and unused for
3
Read this first
Before operating the unit, please read this
manual thoroughly, and retain it for future
reference.
Regulatory Information
Declaration of Conformity
Trade Name: SONY
Model No.: DCR-SR40
Responsible Party: Sony Electronics Inc.
CAUTION
Replace the battery with the
specified type only. Otherwise, fire
or injury may result.
Address: 16530 Via Esprillo, San Diego, CA
92127 U.S.A
Telephone number: 858-942-2230
This device complies with Part 15 of the FCC
Rules.
For customers in the U.S.A. and
CANADA
Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference
that may cause undesired operation.
RECYCLING LITHIUM-ION BATTERIES
Lithium-Ion batteries are
recyclable. You can help preserve
our environment by returning
your used rechargeable batteries
to the collection and recycling
location nearest you.
For more information regarding recycling of
rechargeable batteries, call toll free 1-800-822-
Declaration of Conformity
Trade Name: SONY
Model No.: DCR-SR60, DCR-SR80
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo, San Diego, CA
92127 U.S.A
Caution: Do not handle damaged or leaking
Lithium-Ion batteries.
Telephone number: 858-942-2230
This device complies with Part 15 of the FCC
Rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference
that may cause undesired operation.
Owner’s Record
The model and serial numbers are located on the
bottom. Record the serial number in the space
provided below. Refer to these numbers whenever
you call your Sony dealer regarding this product.
Model No. DCR-SR
Serial No.
Notes
Model No. AC-
Serial No.
DCR-SR40, DCR-SR60 and DCR-SR80 are to be
used with the Handycam Station Model DCRA-
C162 and AC Adaptor Model AC-L25A/L25B.
For customers in the U.S.A.
CAUTION
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
If you have any questions about this
product, you may call:
Sony Customer Information Center 1-800-
222-SONY (7669).
The number below is for the FCC related
matters only.
4
Note
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment
and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
– Consult the dealer or an experienced radio/TV
technician for help.
The supplied interface cable must be used with the
equipment in order to comply with the limits for a
digital device pursuant to Subpart B of Part 15 of
FCC Rules.
Battery pack
THIS DEVICE COMPLIES WITH PART 15 OF
THE FCC RULES.OPERATION IS SUBJECT
TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND (2) THIS
DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
For customers in CANADA
Battery pack
THIS CLASS B DIGITAL APPARATUS
COMPLIES WITH CANADIAN ICES-003.
5
Notes on use
• The camcorder is not dust proofed, drip proofed
Note on operational temperatures
• When the temperature of the camcorder becomes
extremely high or extremely low, you may not
record or playback the camcorder to provide
protection to the camcorder. In case of this, a
• To prevent the hard disk from being broken or
recorded images from being lost, do not remove
the battery pack or AC Adaptor from the
camcorder when either of the respective lamps of
is on.
Note on connecting the camcorder to a
computer
• Do not format the hard disk of the camcorder
using the computer. It may not operate correctly.
On recording
• Before starting to record, test the recording
function to make sure the image and sound are
recorded without any problems.
• Compensation for the contents of recordings
cannot be provided, even if recording orplayback
is not possible due to a malfunction of the
camcorder.
• TV color systems differ depending on the
countries/regions. To view your recordings on a
TV, you need a NTSC system-based TV.
Note on using the camcorder in
highlands
• Do not turn on the camcorder in a low-pressure
area, where its altitude is more than 3,000 meters
(9,800 feet). This may damage the hard disk drive
of your camcorder.
Note on disposal/transfer
• Televisionprograms,films,videotapes,andother
materials may be copyrighted. Unauthorized
recording of such materials may be contrary to
the copyright laws. You cannot dub copyright
protected software on your camcorder.
• If you perform [HDD FORMAT]* or formatting
the camcorder, you may not delete data from the
hard disk completely. When you transfer the
camcorder, it is recommended that you perform
[EMPTY HDD]* to make it difficult to recover
your data. In addition to the above, when you
dispose of the camcorder, it is recommended that
youdestroytheactualbodyofthecamcorder.This
may prevent data recovery on the hard disk of the
camcorder.
Save all your recorded image data
• In the case of your image data being damaged,
save all your recorded images. It is recommended
that you save the image data on a DVD using your
computer*.Also,youcansaveitusingVCR/DVD
device*.
On this manual
• TheimagesoftheLCDscreenusedonthismanual
are captured using a digital still camera, and thus
may appear different from what you see.
• The illustrations used on this manual are based
on the model DCR-SR80.
• The on-screen displaysin each local language are
used for illustrating the operating procedures.
Change the screen language before using your
camcorder if necessary.*
• It is recommended that you save your image data
periodically after recording.
Do not apply shock or vibration to your
camcorder
• The hard disk of the camcorder may not be
recognized, or recording or playback may not be
possible.
On the drop sensor
• ThescreenshotsinthismanualarefromWindows
XP. The scenes may vary depending on the
operating system of the computer.
• To protect the internal hard disk from the shock
by dropping, the camcorder has the drop sensor
function*. When a drop occurs, or under a non-
gravity condition, the block noise to protect the
camcorder may also be recorded. If the drop
sensor catches a drop repeatedly, recording/play
back may be stopped.
*Refer to “Handycam Handbook” (PDF).
6
Table of Contents
Getting Started
Recording/Playback
Recording................................................................................................14
Troubleshooting
Additional Information
7
Step 1: Checking supplied items
Wireless Remote Commander (1)
(DCR-SR60/SR80)
Make sure that you have following items
supplied with your camcorder.
The number in the parentheses indicates the
number of that item supplied.
AC Adaptor (1) (p.10)
A button-type lithium battery is already installed.
Rechargeable battery pack
NP-FP50 (1) (p.11)
To attach the lens cap
A/V connecting cable (1) (p.20)
Thread the grip belt through the lens cap ring.
USB cable (1)
– “ImageMixer for HDDCamcorder” (Software)
– “Handycam Handbook” (PDF)
“Operating Guide” (This manual) (1)
8
On the Remote Commander
(DCR-SR60/SR80)
Using the Remote Commander for the
first time
Remove the insulation sheetbefore using the
Remote Commander.
Insulation sheet
To change the battery of the Remote
Commander
1 While pressing on the tab, inset your
fingernail into the slit to pull out the battery
case.
2 Place a new battery with the + side facing up.
3 Insert the battery case back into the Remote
Commander until it clicks.
Tab
WARNING
Battery may explode if mistreated. Do not
recharge, disassemble or dispose of in fire.
• A button-type lithium battery (CR2025) is used
in the Remote Commander. Do not use batteries
other than the CR2025.
• When the lithium battery becomes weak, the
operating distance of the Remote Commander
may shorten, or the Remote Commander may not
function properly. In this case, replace the battery
with a Sony CR2025 lithium battery. Use of
another battery may present a risk of fire or
explosion.
9
Step 2: Charging the battery pack
2
1
POWER
switch
5
5
Battery pack
CHG
lamp
3
DC IN jack
DC plug
Power cord
To the
wall outlet
AC Adaptor
4
Youcan chargethebattery after attaching the
“InfoLITHIUM” battery pack (P series) to
your camcorder.
5
Set the camcorder onto the
Handycam Station securely.
The CHG (charge) lamp lights up and
charging starts. The CHG (charge) lamp
turns off when the battery pack is fully
charged. Removethecamcorderfromthe
Handycam Station.
1
2
Slide the battery pack in the
direction of the arrow until it clicks.
Slide the POWER switch in the
direction of the arrow to set it to
OFF (CHG) (The default setting).
To remove the battery pack
Slide the POWER switch to OFF (CHG).
Slide the BATT (battery) release lever and
remove the battery pack.
3
4
Connect the AC Adaptor to the DC
IN jack on the Handycam Station.
Be sure that the v mark on the DC
plug is facing up.
Connect the power cord to the AC
Adaptor and the wall outlet.
BATT(battery)
release lever
• When you remove the battery pack, make sure
that none of the respective lamps of the POWER
switch (p.12) is on.
10
On the battery pack
• Before changing the battery pack, slide the
POWER switch to OFF (CHG).
• The power will not be supplied from the battery
as long as the AC Adaptor is connected to the DC
IN jack of your camcorder, even when the power
cord is removed from the wall outlet.
To charge the battery pack using only
the AC Adaptor
Slide the POWER switch up to OFF (CHG),
then connect the AC Adaptor directly to the
DC IN jack on the camcorder.
POWER switch
On the charging/recording/playback time
• Times measured with the camcorder at 25°C
(77°F). (10-30°C (50-86°F) is recommended.)
DC IN
jack
• Available recording and playback time will be
shorter when you use your camcorder in low
temperatures.
DC plug
• The available recording and playback time will
be shorter depending on the conditions under
which you use your camcorder.
Open the jack cover
On the AC Adaptor
• Connect the AC Adaptor to an easily accessible
wall outlet close by. If any trouble occurs while
using the adaptor, immediately shut off the power
by removing the plug from the wall outlet.
Available running time for the
supplied battery pack NP-FP50
• Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
• Do not short-circuit the DC plug of the AC
Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.
Charging time:
Approximate time (min.) required when you
fully charge a completely exhausted battery
pack.
Recording/Playback time:
Approximatetime(min.)availablewhen you
use a fully charged battery pack.
(Unit:min.)
PRECAUTION
• Even if your camcorder is turned off, AC power
(house current) is still supplied to it while
connected to the wall outlet via the AC Adaptor.
DCR-SR60/
DCR-SR40
SR80
Power supply
125
125
Charging time
Recording time*1
You can use your camcorder in any countries/
regions using the AC Adaptor supplied with your
camcorder within the AC 100 V to 240 V, 50/60 Hz
range.
Use a commercially available AC plug adaptor [a],
if necessary, depending on the design of the wall
outlet [b].
100*2
105*3
Continuous
recording time
125
Typical
recording time
55*2
55*3
65
4
*
140
115*2
Playback time
AC-L25A/
L25B
*1 When [REC MODE] is set to [HQ].
*2 When the LCD backlight turns on.
*3When the LCD backlight turns off.
*4 Typical recording time shows the time when you
repeat recording start/stop, turning the power on/
off and zooming.
[a]
[b]
11
Step 3: Turning the power on and setting the date
and time
1
2
When using the camcorder for
the first time, the [CLOCK SET]
screen appears on the LCD
screen.
Touch the
button on the
LCD screen.
CLOCK SET
3&4
AREA26
GMT -5.0
Bogota
New york
,
OFF
DST
DATE
2006Y JANM
1D 12 00 AM
OK
1
2
Remove the lens cap by pressing
both tabs on the sides of the cap.
Pull the lens cap string down until
stopped by the grip belt (DCR-
SR40).
4
Set [DST], [Y] (year), [M] (month),
[D] (day), hour and minute.
The clock starts.
• The recording date and time are not displayed
during recording but are automatically recorded
onto the hard disk and displayed during playback
(see “Handycam Handbook” (PDF)).
• Instead of [DST], [SUMMERTIME] is displayed
for some models.
Turn on the power by sliding the
POWER switch in the direction of
the arrow while pressing the green
button in the center.
When resetting the date and time
You can set the desired date and time by
When you record or play back an image,
slide the POWER switch in the direction
of the arrow repeatedly until the
respective lamp lights up.
touching
TIME/LANGU. t [CLOCK SET]
(p.24).
t [SETUP] t
(Movie): To record movies
(Still): To record still images
(PLAY/EDIT): To play back images on
your camcorder, or to edit/delete them
3
Select the desired geographical
area with
/
, then touch
.
12
Step 4: Making setting adjustments before
recording
2 180 degrees (max.)
2
1
1 90 degrees to
the camcorder
2 90 degrees
(max.)
3
16:9 (wide)
4:3
1
2
Open the LCD screen 90 degrees
to the camcorder (1), then rotate
ittothebestangle torecordorplay
(2).
4
Fasten the grip belt and hold your
camcorder correctly.
Slide the POWER switch in the
direction of the arrow repeatedly
until the respective lamp lights up.
(Movie):To record movies
(Still):To record still images
• When you turn on
(Still), the screen
aspect ratio is changed to 4:3 automatically.
3
Press WIDE SELECT repeatedly to
select the desired screen aspect
ratio (DCR-SR60/SR80).
13
Recording
Lens cover
Opensin accordancewith thesetting ofthe
POWER switch (DCR-SR60/SR80).
PHOTO
Beep
Shutter
click
60min
1.0M FINE
123
P-MENU
Flashing b Lights up
START/STOP B
1
START/STOP A
60min
REC
00:01:00
P-MENU
START/
STOP
[STBY] b [REC]
1
2
Slide the POWER switch in the direction of the arrow repeatedly until the
respective lamp lights up.
Press the green button only when the POWER switch is in the OFF (CHG) position.
Start recording.
Movies
Press START/STOP A (or B).
Still Images
Press PHOTO lightly to adjust the
focus A, then press it fully B.
A shutter sound is heard. When
disappears, the image has been recorded.
To stop recording, press START/STOP
again.
• If the ACCESS lamp is on after recording is finished, it means data is still being written onto the hard disk.
Do not apply shock or vibration to your camcorder, and do not remove the battery pack or AC Adaptor.
• You cannot record movies and still images at the same time.
• The maximum continuous recordable time is approximately 13 hours.
14
Playback
1
Slide the POWER switch repeatedly to light up the
(PLAY/EDIT) lamp.
The VISUAL INDEX screen appears on the LCD screen.
Searching for the desired
images by date
Recording
date
DATE
EDIT
60min
DEC 21 2006
12:34:01
Previous
6 images
Next 6
The last recorded/played back
movie is marked with i. Also,
whenyou touchi,youcanplay
backthemoviefromthepointyou
have stopped previously.
images
P-MENU
(Movie) tab
(Still) tab
(Playlist) tab
2
Start playback.
Movies
Still Images
Touch
(Movie)tabandthemovie
Touch
(Still)tabandthestillimage
to be played back.
to be played back.
Toggles Play
Beginning of the
scene/previous
scene
Slide show button
Next
scene
orPauseasyou
touch
101-0001
001-1000
P-MENU
P-MENU
Stop(gototheVISUAL
INDEX screen)
Reverse/Forward
Go to the VISUAL Previous/
INDEX screen
Next
When playback from the selected movie
reaches the last movie, the screen returns
to the VISUAL INDEX screen.
• Touch
movie slowly.
• One touch of
/
during pause to play back
makes the reverse/
• The ACCESS lamp either lights or flashes when
image data is read from the hard disk drive of the
camcorder.
/
fast forward approximately five times faster, two
touches make it approximately 10 times faster,
three touches make it approximately 30 times
faster, four touches make it approximately 60
times faster.
To adjust the volume
Touch
with
t [VOLUME], then adjust it
.
/
• If you cannot find [VOLUME] in
, touch
15
Parts and functions used for the camcorder
Handycam
Station
7 Recording lamp (DCR-SR60/SR80)
The recording lamp lights up red during
Recording
recording. The lamp flashes when the
remaining capacity for the battery or the hard
disk of the camcorder is running low.
1 NIGHTSHOT PLUS switch
To record in dark places, set the
NIGHTSHOTPLUSswitchtoON. (
[“NIGHTSHOT PLUS”] appear.)
and
8 Tripod receptacle (Bottom surface)
To use a tripod, attach the tripod (optional:
the length of the screw must be less than 5.5
mm) to the tripod receptacle using a tripod
screw.
2 Power zoom lever
To use zoom, move the power zoom lever.
Move the power zoom lever slightly for a
slower zoom. Move it further for a faster
zoom.
9 Zoom buttons
Press for zooming in/out.
W:Wide
Wider range of view
T:Telephoto
Close view
q; LCD screen
To record in mirror mode, open the LCD
screen90degreestothecamcorder(1),then
rotate it 180 degrees to the lens side (2).
5 Built-in stereo microphone
Records sound.
6 Remote sensor (DCR-SR60/SR80)
Receive the signal from the Remote
Commander.
16
qs Shoulder belt hook
qa Speaker
To attach the shoulder belt, attach the
shoulder belt(optional) with yourcamcorder
to the shoulder belt hook.
Sound comes out from the speaker while
playing back.
qh EASY button
Refer to the instructions on EASY button in
“Recording”.
qd BACK LIGHT button
To adjust the exposure for backlit subjects,
press BACK LIGHT to display .. To cancel
the back light function, press BACK LIGHT
again.
Connecting to other devices
qj qk ql ....... Open the jack cover.
qf RESET button
To initialize the settings (Reset), press
RESETtoinitialize allthesettings,including
settings for date and time.
3 Shoe cover (DCR-SR60/SR80)
Open when using Active Interface Shoe.
4 Active Interface Shoe
qg DISP/BATT INFO button
You can change the settings for the screen
display settings or check the remaining
battery power.
(DCR-SR60/SR80)
The Active Interface Shoe supplies power to
optional accessories such as a video light, a
flash, or a microphone. The accessory can be
turned on or off as you operate the POWER
switch on your camcorder.
qh EASY button
By pressing the EASY button, most of the
settings on the camcorder will be
automatically operated. In this way, you can
use the camcorder with simple operation
(Easy Handycam operation). During Easy
Handycam operation, you may not use some
of the buttons on the camcorder.
qj DC IN jack
Connect to the DC plug of the AC Adaptor.
qk A/V (audio/video) jack
Connect with the A/V connecting cable.
ql REMOTE jack (DCR-SR60/SR80)
Connect other optional accessories.
Playback
2 Power zoom lever
9 Zoom buttons
You can magnify images from about 1.1 to 5
times the original size (Playback zoom).
w; DVD BURN button
Create a DVD by connecting the camcorder
to a computer.
wa Interface connector
1 Play back the image you want to magnify.
Connect with the camcorder and the
Handycam Station.
2 Magnify the image with T (Telephoto).
A frame appears on the LCD screen.
3 Touch the portion you want to display in
ws (USB) jack
Connect with the USB cable.
the center of the LCD screen.
4 Adjust the magnification with W (Wide
angle)/T (Telephoto).
To cancel, touch [END].
17
Indicators displayed during recording/playback
Recording movies
Recording still images
60min
REC
00:01:00
60min
112
[
]
60min
P-MENU
P-MENU
1 Remaining battery (approx.)
8 Image size (DCR-SR60/SR80)
9 Quality ([FINE] / [STD])
2 Recording mode (HQ / SP / LP)
3 Recording status ([STBY] (standby) /
q; Number of recordable still images
[REC] (recording))
4 Counter (hour: minute: second)
5 Remaining recordable time of movies
6 Review button
7 Personal Menu button
Viewing movies
Viewing still images
1/12
60min
60min
100/112
01:01:00
102-0001
101-0001
P-MENU
P-MENU
qa Playback mode
qh Recording folders/files
qj VISUAL INDEX button
qk Previous/Next button
qs Recording folders/files
qd Video operation buttons
qf Number of played back movies/Total
ql Numberofplayedbackstillimages/Total
number of recorded movies
number of recorded still images
qg Previous/Next button
w; Slide show button
18
Center
Indicators on the LCD screen
Indicator
Meaning
When you can change the setup items, or
during recording or playback, following
indicators are displayed.
NightShot plus
Super NightShot plus
Color Slow Shutter
PictBridge connecting
Upper left
Upper center
Upper right
60min
STBY
00:01:00
[
]
60min
E
Warning
Bottom
P-MENU
Indicator
Meaning
Bottom
Center
Picture effect
Digital effect
Manual focus
Upper left
9
Indicator
Meaning
PROGRAM AE
Self-timer recording
Continuous photo
recording /Bracket
recording
.
Backlight
n
White balance
WIDE SELECT
SteadyShot off
Flash light
Flexible spot meter /
Exposure
MICREF LEVEL low
Upper center
DATA CODE while recording
Indicator
Meaning
The recording date and time are recorded
automatically. They are not displayed while
recording. However, you can check them as
[DATA CODE] during playback.
Repeat of Slide show
Upper right
Indicator
Meaning
Fader
LCD backlight off
Drop sensor off
Drop sensor
19
Deleting images
Playing the image on a
TV
Connect your camcorder to the input jack of
TV or VCR using A/V connecting cable 1
(supplied) or A/V connecting cable with S
VIDEO 2 (optional). For details, see
“Handycam Handbook” (PDF).
1
2
Select the
(Still) tabonthe VISUALINDEX
screen.
(Movie) tab or the
A/V jack
Touch [EDIT] t [DELETE], then
select the image to be deleted.
The selected image is marked with
.
3
Touch
t [YES].
To delete all movies or still images at
once
then follow the on-screen instructions.
S VIDEO
VIDEO
(Yellow)
(White)
Deleting images by date
1 Touch [DATE] on the VISUAL INDEX
screen, then touch the Previous/Next
Date button to select the date of the
desired image.
AUDIO
(Red)
2 Touch
t [EDIT] t [DELETE
IN
DATE] t [YES].
Deleting the last scene
You can check the last recorded movie/still
image. Also, you can delete the checked
images.
VCRs or TVs
: Signal flow
1 Slide the POWER switch to light up the
(Movie) or
touch
(Still) lamp, then
.
2 Touch
t [YES].
20
Performing with a computer
• ThemodelnameofyourHandycamisprinted
on its bottom surface.
In the supplied CD-ROM, the following
items are contained:
6 Click [Exit] t [Exit], then remove the CD-
ROM from the disc drive of your computer.
– “ImageMixer for HDD Camcorder”
(Software)
Software to help you view/edit/create
DVD on a computer connected to the
camcorder.
x For Macintosh user
1 Turn on the computer.
2 Place the CD-ROM (supplied) on the disc
– “Handycam Handbook” (PDF)
Handbook to introduce how to use the
camcorder.
Install the above on a computer by following
the steps below.
drive of your computer.
3 Open the [Handbook] folder in the CD-
ROM, double-click the [US] folder and then
drag-and-drop the “Handbook.pdf” on the
computer.
After having the software installed, double-
click “Handbook.pdf”, you can view the
handbook.
Viewing
“Handycam Handbook” (PDF)
To view “Handycam Handbook,” you need
to install Adobe Reader on your computer.
Installing the supplied software
x For Windows user
1 Turn on the computer.
The supplied software
“ImageMixer for HDD Camcorder”
is not compatible with a Macintosh.
To use the camcorder connecting with a
Macintosh, apply the compliant software
introduced on the following website.
2 Place the CD-ROM (supplied) on the disc
drive of your computer.
The select screen for installation appears.
• The system requirements for Macintosh are
also shown on the website.
Pixela home page:
Compliant Software:
– Capty MPEG Edit EX (Video editing
software)
– Capty DVD/VCD 2 (DVD authoring
software)
3 Click [Handycam Handbook].
The installation screen for “Handycam
Handbook” appears.
x System requirements
When using the supplied software, you need
the following system requirements below.
OS : Windows 2000 Professional (Service
Pack 3 or later) / Windows XP Home
Edition/Windows XP Professional
4 Selectdesired language andselect the model
name of your Handycam.
5 Click [Handycam Handbook (PDF)].
Installation starts. When the installation is
completed, the short-cuticon of “Handycam
Handbook” appears on the desktop of your
computer.
• Standardinstallationisrequired. Operationis
not assured if the above OS has been
upgraded.
21
1 Confirm that your camcorder is not
connected to the computer.
CPU : Intel Pentium III 800 MHz or faster
(Pentium 4 1.7 GHz or faster
recommended), or the equivalent CPU
2 Turn on the computer.
• Log on as Administrators for installation.
• Close all the applications running on the
computer before installing the software.
Application : DirectX 9.0c or later (This
product is based on DirectX technology.
It is necessary to have DirectX installed.)
3 Place the CD-ROM (supplied) on the disc
drive of your computer.
The select screen for installation appears.
Sound system : 16 bit stereo sound card
and stereo speakers
4 Click [ImageMixer for HDD Camcorder].
The installation screen appears.
Memory : For Windows 2000 Professional:
128 MB or more (256 MB or more
recommended)
For Windows XP Home Edition /
Professional Edition: 256 MB or more
(512 MB or more recommended)
Hard Disk : Available memory required for
installation: 300 MB or more
Available free hard disk space for
operations required: 14 GB or more (for
dual layer DVD system, 28 GB or more
required)
• When copying images to a computer, more
available disk space required for saving
image data than shown above.
If the screen does not appear, follow the steps
below.
1Click [start], then click [My Computer] (For
Windows 2000, double-click [My
Computer] on the desktop.)
2Double-click [CAMCORDERSOFT (E:)]
(CD-ROM)*
Display : 4MB VRAM video card,
Minimum 1024 × 768 dots, High color
(16 bitcolor, 65 000 colors). This product
will not operate correctly at less than
800 × 600 dots, and 256 colors or less.
* Drive names (such as (E:)) vary
depending on the computer.
3Double-click [install.exe].
5 Click [Install].
6 Select the language for the application to be
installed, then click [Next].
7 Click [Next].
8 Read [License Agreement], check [I accept
thetermsofthelicenseagreement]whenyou
agree, then click [Next].
USB port : As standard equipment (USB
2.0 recommended)
• The camcorder is compatible with Hi-Speed
USB (USB2.0). You can transfer data at a
faster rate using a computer compatible with
Hi-Speed USB (USB2.0). When you connect
a USB interface not compatible with Hi-
Speed USB (USB2.0), the data transfer ratio
will be that of USB1.1 (USB full speed).
Disc Drive : A DVD writable drive
• Operations are not guaranteed on any computers
fulfilling the above system requirements.
x Installing software
You need to install the software to your
Windows computer. The installation is only
required once.
22
2Click [Next].
9 Selectafoldertosavethesoftware,thenclick
[Next].
3Click [Finish].
0 Select [NTSC], then click [Next].
qd Make sure [Yes, I want to restart my
computer now.] is checked, then click
[Finish].
qa Click [Install] on the [Ready to Install the
Program] screen.
The installation for “ImageMixer for HDD
Camcorder” starts.
The computer turns off once, then starts up
again automatically (Restart).
qs If the [Installing Microsoft ® DirectX ®]
screen is displayed, follow the steps below
toinstall DirectX9.0c. Ifnot, skiptostepqd.
When you complete the installation, the
shortcut icons for
[ImageMixer for HDD
Camcorder] and [ImageMixer destination
folder] appear on the desktop of your computer.
1Read [License Agreement], then click
[Next].
qf Remove the CD-ROM from the disc drive
of your computer.
23
Performing various functions - Setup
1
Slide the POWER switch in the direction of the arrow repeatedly until the
respective lamp lights up.
: Settings for movies
: Settings for still images
: Settings for PLAY/EDIT
2
Touch the LCD screen to select the setup item.
Unavailable items will be grayed out.
x To change the setup items
You can customize setup items that are not
x To use the short-cuts of Personal
Menu
OnPersonalMenu, short-cutsforfrequently
used setup items are added.
• For details, see “Handycam Handbook”
(PDF).
added to Personal Menu.
1 Touch
2 Select the desired setup item.
Touch
touch
t[SETUP].
/
to select the item, then
. (The process in step 3 is the
same as that in step 2.)
3 Select the desired item.
1 Touch
.
• You can also touch the item directly to
select it.
60min
STBY
EXPO-
SURE
SETUP
4 Customize the item.
After finishing the settings, touch
SPOT
FADER
FOCUS
FOCUS
SPOT
METER
t
(close) to hide the setup
screen.
If you decide not to change the settings,
2 Touch the desired setup item.
touch
to return to the previous
If the desired setup item is not displayed
screen.
on the screen, touch
displayed.
/
until it is
x To change the setup items during
Easy Handycam operation
3 Select the desired setting, then touch
.
does not appear during Easy
Handycam operation. Touch [SETUP],
available setup items appear.
24
Setup items
Available setup items vary depending on the operating mode. Unavailable items will be
grayed out on the LCD screen of the camcorder. For details, refer to “Handycam
Handbook” (PDF).
CAMERA SET
PROGRAM AE:
SPOT METER:
EXPOSURE:
Records images effectively in various situations.
Adjusts and fix the exposure to a subject.
Fixes the brightness of an image.
WHITE BAL.:
Adjusts the color balance to the brightness of the recording environment.
Automatically activates the electronic shutter to adjust the shutter speed.
Selects and adjusts the focal point to aim it to at a subject not located in
the center of the screen.
AUTO SHUTTER:
SPOT FOCUS:
FOCUS:
Adjusts the settings to have focused on a subject.
Adjusts various settings for using an external flash.
1
FLASH SET * :
SUPER NSPLUS: Records an image in a higher sensitivity than NightShot plus.
NS LIGHT:
Records clearer images with the light which emits infrared light while
using NightShot plus.
COLOR SLOW S: Records an image brighter in color even in dark places.
SELF-TIMER:
Selects whether to set the self-timer for shooting a still image.
Selects whether to set the self-timer for recording a movie.
Selects the zoom level using digital zoom.
SELF-TIMER:
DIGITAL ZOOM:
2
WIDE SELECT * : Sets the screen aspect ratio matching a TV screen.
STEADYSHOT:
Prevents an image from being blurred.
STILL SET
1
BURST * :
Records several still images one after another.
Selects the quality for recording a still image.
QUALITY:
1
IMAGE SIZE * : Selects the size for recording a still image.
PICT.APPLI.
FADER:
Selects whether to fade in/out adding various effects.
Records additional digital effects.
D.EFFECT:
PICT.EFFECT:
Records adding special picture effects.
1
REC CTRL * :
Displays operating buttons when recording an image saved on other
device on the camcorder.
3
USB SELECT * :
DEMO MODE:
Selects a function for connecting the camcorder with a computer/printer.
Displays the demonstration of the functions on the camcorder.
25
HDD SET
HDD FORMAT:
Initializes the hard disk drive.
HDD INFO:
DROP SENSOR:
EMPTY HDD:
Displays free hard disk space of the hard disk drive.
Deactivates the camcorder when detecting a drop for data protection.
Prevents data on the hard disk drive from being recovered.
–
Displays this item only when the camcorder is turned on by pressing DISP/
BATT INFO, with the AC Adaptor connected to the camcorder.
STANDARD SET
REC MODE:
Selects image quality of a movie.
VOLUME:
MULTI-SOUND:
Adjusts the volume during a movie playback.
Selects whether to play audio with dual sound or stereo sound.
1
MICREF LEVEL * : Selects the microphone level for recording sound.
LCD SET:
Sets various settings for the LCD screen.
1
TV TYPE * :
USB SPEED:
DATA CODE:
DISPLAY:
Selects the aspect ratio of an image output from the camcorder.
Selects the speed for data transfer via USB connection.
Displays date and time and camera data during playback.
Selects a number of thumbnails on the VISUAL INDEX display.
Selects whether to display the remaining hard disk free space for a movie
recording.
REMAINING:
1
REMOTE CTRL * : Select whether to receive remote control signals or not.
REC LAMP * :
1
Selects whether to light up the REC lamp on the front panel of the
camcorder.
BEEP:
Selects whether to emit a beep during operation.
Selects whether to show a display such as a counter on the LCD screen
or on a TV.
DISP OUTPUT:
SETUP ROTATE:
A.SHUT OFF:
Select whether to scroll up or down the setup items.
Automatically turns off the camcorder when it is not operated.
Adjusts the sensibility for the touch panel.
CALIBRATION:
TIME/LANGU.
CLOCK SET:
Select date and time.
AREA SET:
DST SET/
Adjust a time difference without stopping the clock abroad.
Selects whether to set summer time.
SUMMERTIME:
LANGUAGE:
Selects the language to be used on the LCD screen.
*
*
*
1 DCR-SR60/SR80
2 DCR-SR40
3 [USB SELECT] appears automatically when your camcorder is connected to a computer or other device
with the USB cable.
26
Troubleshooting
If you run into any problems using your camcorder, refer to the following table to troubleshoot
them. If your problem persists, remove the power source and contact with your Sony dealer.
Note before sending your camcorder for repair
• Your camcorder may be required to initialize or change the current hard disk of the camcorder, depending
on the problem. In the event of this, the data stored on the hard disk will be deleted. Be sure to save (backup)
the data on the hard disk (see “Handycam Handbook” (PDF)) on the other media before sending your
camcorder to repair. We cannot guarantee any loss of your hard disk data.
• During repair, we may check a minimum amount of data stored on the hard disk in order to improve the
condition. However, your Sony dealer will neither copy nor save your data.
The camcorder does not operate even when the power is set to on.
• Remove the AC Adaptor from the wall outlet or remove the battery pack, then reconnect it after
sharp-pointed object. (If you press the RESET button, all settings are reset, except the Personal
Menu items.)
• The temperature of your camcorder is extremely high. Turn off your camcorder and leave it
for a while in a cool place.
• The temperature of your camcorder is extremely low. With POWER switch turned on, leave
the camcorder for a while. If you still cannot operate the camcorder, turn it off, taking it to a
warm place. Leave the camcorder there for a while, then turn on the camcorder.
Buttons do not work.
• During Easy Handycam operation, available buttons are limited. Cancel Easy Handycam
operation. For details on Easy Handycam operation, refer to “Handycam Handbook” (PDF).
The power does not turn on.
• Thebatterypackisnotattachedtothecamcorder.Attachachargedbatterypacktothecamcorder
• The plug of the AC Adaptor has been removed from the wall outlet. Connect it to the wall outlet
The power abruptly turns off.
• When approximately five minutes have elapsed while you do not operate your camcorder, the
camcorder is automatically turned off (A.SHUT OFF). Change the setting of [A.SHUT OFF],
or turn on the power again, or use the AC Adaptor.
27
Pressing START/STOP or PHOTO does not record movies/still images.
• Your camcorder is recording the image you have just shot on the hard disk of the camcorder.
You cannot press PHOTO while [CAPTURE] or appears on the LCD screen.
• The hard disk of the camcorder is full. Delete unnecessary images. Or perform [HDD
FORMAT].
• The temperature of your camcorder is extremely high. Turn off your camcorder and leave it
for a while in a cool place.
• The temperature of your camcorder is extremely low. With POWER switch turned on, leave
the camcorder for a while. If you still cannot operate the camcorder, turn it off, taking it to a
warm place. Leave the camcorder there for a while, then turn on the camcorder.
The recording stops.
• The temperature of your camcorder is extremely high. Turn off your camcorder and leave it
for a while in a cool place.
• The temperature of your camcorder is extremely low. Turn off the camcorder and take it to a
warm place. Leave the camcorder there for a while, then turn on the camcorder.
• The maximum continuous recordable time is approximately approximately 13 hours.
Setup items are grayed out.
• You cannot select grayed out items in the current situation.
The beep sounds for five seconds.
• The temperature of your camcorder is extremely high. Turn off your camcorder and leave it
for a while in a cool place.
• Some problems have occurred in your camcorder. Turn off and on, then operate your camcorder
again.
28
Warning indicators
Self-diagnosis display/Warning
indicators
100-0001 (Warning indicator
pertaining to files)
Slow flashing
• The file is damaged.
• The file is unreadable.
IfindicatorsappearontheLCDscreen,check
the following.
You can solve some of the symptoms by
yourself. If your problem persists even after
youhavetried acoupleoftimes, contactyour
Sony dealer or local authorized Sony service
facility.
(Warning on the hard disk of the
camcorder)*
Fast flashing
• Anerrormayhaveoccurredwiththehard
disk drive in your camcorder.
C:04:00
(Warning on the hard disk of the
camcorder)*
Fast flashing
• The hard disk of the camcorder is fully
recorded.
• Anerrormayhaveoccurredwiththehard
disk drive in your camcorder.
C:(or E:) ss:ss (Self-diagnosis
display)
C:04:ss
• The battery pack is not an
“InfoLITHIUM” battery pack. Use an
• Connect the DC plug of the AC Adaptor
to the DC IN jack of the Handycam
Station or your camcorder securely
E (Battery level warning)
Slow flashing
• The battery pack is nearly used up.
• Depending on the operating
environment or battery conditions, E
may flash, even if there are
C:13:ss / C:32:ss
approximately 20 minutes remaining.
• Remove the power source. Reconnect it
and operate your camcorder again.
(High temperature warning)
Slow flashing
• The temperature of your camcorder is
getting higher. Turn off your camcorder
and leave it for a while in a cool place.
E:20:ss / E:31:ss / E:40:ss /
E:61:ss / E:62:ss / E:91:ss /
E:94:ss
• A malfunction that you cannot service
has occurred. Contact your Sony dealer
or local authorized Sony service facility.
Inform them of the 5-digit code, which
starts from “E”.
Fast flashing*
• The temperature of your camcorder is
extremelyhigh. Turnoffyourcamcorder
and leave it for a while in a cool place.
(Low temperature warning)
Fast flashing*
• The temperature of your camcorder is
extremely low. Make the camcorder
warm.
29
(Warning indicator pertaining to
camera-shake warning)*
• The amount of lights is not sufficient, so
camera-shake easily occurs. Use the
flash.
• The camcorder is unsteady, so camera-
shake easily occurs. Hold the camcorder
steady with both hands and record the
image. However, note that the camera-
shake warning indicator does not
disappear.
*
You hear a melody when the warning indicators
appear on the screen.
30
Precautions
• Keep the Remote Commander and button-type
battery out of children’s reach. If the battery is
accidentally swallowed, consult with a doctor
immediately (DCR-SR60/SR80).
• If the battery electrolytic liquid has leaked,
– consultwithyourlocalauthorizedSonyservice
facility.
On use and care
• Donot use orstorethecamcorder and accessories
in the following locations.
– Anywhere extremely hot or cold or humid
places. Never leave them exposed to
temperatures above 60°C (140°F), such as
under direct sunlight, near heaters or in a car
parked in the sun. They may malfunction or
become deformed.
– wash off any liquid that may have contacted
your skin.
– if any liquid getsin your eyes, wash with plenty
of water and consult with a doctor.
– Near strong magnetic fields or mechanical
vibration. The camcorder may malfunction.
– Near strong radio waves or radiation. The
camcorder may not record properly.
– NearAMreceiversandvideoequipment.Noise
may occur.
– On a sandy beach or anywhere dusty. If sand or
dust gets in your camcorder, it may
malfunction. Sometimes this malfunction
cannot be repaired.
x Whennotusingyourcamcorderforalong
time
• Occasionally turn it on and let it run such as by
playing back images or recording for about three
minutes.
• Useupthebattery packcompletelybeforestoring
it.
– Near windows or outdoors, where the LCD
screen or the lens may be exposed to direct
sunlight. This damages the inside of the LCD
screen.
• Operate your camcorder on DC 7.2 V (battery
pack) or DC 8.4 V (AC Adaptor).
On the LCD screen
• Do not exert excessive pressure on the LCD
screen. Blurs appear and it may cause a
malfunction of your camcorder.
• If your camcorder is used in a cold place, a
residual image may appear on the LCD screen.
This is not a malfunction.
• For DC or AC operation, use the accessories
recommended in this instruction manual.
• Do not let your camcorder get wet, for example,
fromrainorseawater.Ifyourcamcordergetswet,
it may malfunction. Sometimes this malfunction
cannot be repaired.
• While you are using your camcorder, the back of
the LCD screen may heat up. This is not a
malfunction.
x To clean the LCD screen
• If any solid object or liquid gets inside the casing,
unplug your camcorder and have it checked by a
Sony dealer before operating it any further.
• Avoidroughhandling,disassembling,modifying,
physical shock, or impact such as hammering,
dropping or stepping on the product. Be
particularly careful of the lens.
If fingerprints or dust make the LCD screen
dirty, use the cleaning cloth (optional) to
clean the LCD screen.
When you use the LCD Cleaning Kit
(optional), do not apply the cleaning liquid
directly to the LCD screen. Use cleaning
paper moistened with the liquid.
• Keep the POWER switch setting to OFF (CHG)
when you are not using your camcorder.
• Do not wrap your camcorder with a towel, for
example, and operate it. Doing so might cause
heat to build up inside.
• Whenremovingthepowercord, pullitbytheplug
and not the cord.
• Do not damage the power cord such as by placing
anything heavy on it.
• Keep metal contacts clean.
31
x Procedures
On handling the casing
Connect your camcorder to a wall outlet
using the AC Adaptor supplied with your
camcorder, and leave your camcorder with
the POWER switch turned off for more than
24 hours.
• If the casing is soiled, clean the camcorder body
withasoftcloth lightlymoistenedwithwater,and
then wipe the casing with a dry soft cloth.
• Avoid the followings to prevent damage to the
finish.
– Using chemicals such as thinner, benzine,
alcohol, chemical cloths, repellent and
insecticide and sunscreen.
– Handling with above substances on yourhands.
– Leaving the casing in contact with rubber or
vinyl objects for a long period of time.
Care and storage of the camera lens
• Wipethe surfaceofthelensclean with a softcloth
in the following instances:
– when there are fingerprints on the lens surface.
– in hot or humid locations
– when the lens is exposed to salty air such as at
the seaside.
• Storethelensinawell-ventilatedlocationsubject
to little dirt or dust.
• To prevent mold, periodically clean the lens as
described above. It is recommended that you
operate your camcorder about once a month to
keep it in optimum state for a long time.
To charge the pre-installed
rechargeable battery
Your camcorder has a pre-installed
rechargeable battery to retain the date, time,
and other settings even when the POWER
switchissettoOFF(CHG).Thepre-installed
rechargeablebattery isalways charged while
you are using your camcorder but it will get
discharged gradually if you do not use your
camcorder. The rechargeable battery will be
fully discharged in about 3 months if you
do not use your camcorder at all. However,
even if the pre-installed rechargeable battery
is not charged, the camcorder operation will
not be affected as long as you are not
recording the date.
32
Specifications
Approx. 1 000 000 pixels
Effective (Still, 16:9)
Approx. 750 000 pixels
System
Video compression format
MPEG2/JPEG (Still images)
Lens
Hard Disk
Carl Zeiss Vario Tessar
DCR-SR40/SR60
Filter diameter: 30 mm (1 in.)
DCR-SR40
Optical:20 × , Digital:40 × , 800 ×
F=1.8-3.1
30 GB
DCR-SR80
60 GB
When measuring media capacity, 1GB equals
1 billion bytes, a portion of which is used for
data management.
DCR-SR60/SR80
Optical:12 × , Digital:24 × , 800 ×
F=1.8-2.5
Audio compression format
Dolby Digital 2ch
Focal length
DCR-SR40
Dolby Digital Stereo Creator
f=2.3 - 46 mm (3/32 - 1 13/16 in.)
When converted to a 35 mm still camera
For movies:
Video signal
NTSC color, EIA standards
44 - 880 mm (1 3/4 - 34 1/32 in.)
For still images:
44 - 880 mm (1 3/4 - 34 1/32 in.)
Recording format
Movie
MPEG2-PS
DCR-SR60/SR80
Still image
f=3.0 - 36 mm (1/8 - 1 7/16 in.)
When converted to a 35 mm still camera
For movies:
Exif *1 Ver.2.2
Recording/playback time
46 - 628.5 mm (1 13/16 - 24 3/4 in.) (16:9)*2
48 - 576 mm (1 15/16 - 22 3/4 in.) (4:3)
For still images:
DCR-SR40/SR60
HQ:Approx. 440 min.
SP: Approx. 650 min.
LP: Approx. 1 250 min.
40 - 480 mm (1 5/8 - 19 in.) (4:3)
43.6 - 523.2 mm (1 3/4 - 20 5/8 in.) (16:9)
DCR-SR80
Color temperature
HQ:Approx. 880 min.
SP: Approx. 1 300 min.
LP: Approx. 2 510 min.
[AUTO], [ONE PUSH], [INDOOR](3 200 K),
[OUTDOOR] (5 800 K)
Minimum illumination
Number of recordable movies/still images
Movie: Maximum of 9 999
DCR-SR40
5 lx (lux) (F1.8)
Still image: Maximum of 9 999
0 lx (lux) (in the NightShot plus function)
DCR-SR60/SR80
7 lx (lux) (F1.8)
Image device
DCR-SR40
3mm(1/6type)CCD(ChargeCoupledDevice)
Gross:
0 lx (lux) (in the NightShot plus function)
Approx. 680 000 pixels
Effective (Movie):
*1
“Exif”isafileformatforstillimages, established
Approx. 340 000 pixels
Effective (Still):
Approx. 340 000 pixels
bytheJEITA(JapanElectronicsandInformation
Technology Industries Association). Files in this
format can have additional information such as
your camcorder’s setting information at the time
of recording.
DCR-SR60/SR80
3.27 mm (1/5.5 type) CCD (Charge Coupled
Device)
*2
In 16:9 mode, the focal length figures are actual
figures resulting from wide angle pixel readout.
Gross:
Approx. 1 070 000 pixels
Effective (Movie, 4:3)
Approx. 690 000 pixels
Effective (Movie, 16:9)
Approx. 670 000 pixels
Effective (Still, 4:3)
• Manufactured under license from Dolby
Laboratories.
33
Dimensions (Approx.)
Input/Output connectors
DCR-SR40
69 × 71 × 117 mm (2 3/4 × 2 7/8 × 4 5/8 in.)
(w×h×d) including protrusions
69 × 71 × 117 mm (2 3/4 × 2 7/8 × 4 5/8 in.)
(w×h×d) including protrusions with supplied
battery attached
Audio/Video output
10 pin connector
Video signal: 1 Vp-p, 75 Ω (ohms), unbalanced
Luminance signal: 1 Vp-p, 75 Ω (ohms),
unbalanced
Chrominancesignal:0.286 Vp-p, 75 Ω (ohms),
unbalanced
Audio signal: 327 mV (at load impedance
47 kΩ (kilohms)), Output impedance less than
2.2 kΩ (kilohms)
Mass (Approx.)
DCR-SR40
340g (12 oz) main unit only
390g (13 oz) including the NP-FP50
rechargeable battery pack and the lens cap
DCR-SR60
350g (12 oz) main unit only
390g (13 oz) including the NP-FP50
rechargeable battery pack
DCR-SR60/SR80
Audio/Video input/output
DCR-SR80
10 pin connector
360g (12 oz) main unit only
400g (14 oz) including the NP-FP50
rechargeable battery pack
Input/Output auto switch
Video signal: 1 Vp-p, 75 Ω (ohms), unbalanced
Luminance signal: 1 Vp-p, 75 Ω (ohms),
unbalanced
Chrominancesignal:0.286 Vp-p, 75 Ω (ohms),
unbalanced
Audio signal: 327 mV (at load impedance
47 kΩ (kilohms)), Input impedance more than
47 kΩ (kilohms), Output impedance less than
2.2 kΩ (kilohms)
Supplied accessories
Handycam Station
Input/Output connectors
DCRA-C162 (DCR-SR40)
Audio/Video output
REMOTE jack
10 pin connector
Stereo mini-minijack (Ø 2.5 mm)
Video signal: 1 Vp-p, 75 Ω (ohms), unbalanced
Luminance signal: 1 Vp-p, 75 Ω (ohms),
unbalanced
Chrominancesignal:0.286Vp-p, 75Ω(ohms),
unbalanced
Audio signal: 327 mV (at load impedance
47 kΩ (kilohms)), Output impedance less than
2.2 kΩ (kilohms)
LCD screen
Picture
DCR-SR40
6.2 cm (2.5 type)
DCR-SR60/SR80
6.9 cm (2.7 type, aspect ratio 16:9)
USB jack
Total number of pixels
mini-B
123 200 (560 × 220)
DCRA-C162 (DCR-SR60/SR80)
General
Power requirements
7.2 V (battery pack)
8.4 V (AC Adaptor)
Audio/Video input/output
10 pin connector
Input/Output auto switch
Video signal: 1 Vp-p, 75 Ω (ohms), unbalanced
Luminance signal: 1 Vp-p, 75 Ω (ohms),
unbalanced
Chrominancesignal:0.286Vp-p, 75Ω(ohms),
unbalanced
Audio signal: 327 mV (at load impedance
47 kΩ (kilohms)), Input impedance more than
47 kΩ (kilohms), Output impedance less than
2.2 kΩ (kilohms)
Average power consumption
DCR-SR40
2.2 W
DCR-SR60/SR80
2.8 W
Operating temperature
0°C to + 40°C (32°F to 104°F)
Storage temperature
USB jack
-20°C to + 60°C (-4°F to + 140°F)
mini-B
34
AC Adaptor AC-L25A/L25B
On trademarks
• “Handycam” and
registered trademarks of Sony Corporation.
are
Power requirements
AC 100 - 240 V, 50/60 Hz
• “InfoLITHIUM” is a trademark of Sony
Corporation.
Current consumption
0.35 - 0.18 A
• “Memory Stick Duo” is a trademark of Sony
Corporation.
Power consumption
18 W
• “ImageMixer for HDD Camcorder” is a
trademark of Pixela Corporation.
Output voltage
DC 8.4 V*
• Dolby and the double-D symbol are trademarks
of Dolby Laboratories.
• Dolby Digital Stereo Creator is a trademark of
Dolby Laboratories.
• DVD-R, DVD-RW, and DVD+RW logo are
trademarks.
• Microsoft, Windows, and Windows Media are
either registered trademarks or trademarks of
Microsoft Corporation in the United States and/
or other countries.
Operating temperature
0°C to + 40°C (32°F to 104°F)
Storage temperature
-20°C to + 60°C (-4°F to + 140°F)
Dimensions (Approx.)
56×31×100mm(21/4×11/4×4in.)(w×h×d)
excluding the projecting parts
Mass (Approx.)
190 g (6.7 oz) excluding the power cord
*
See at the label of AC Adaptor for other
specifications.
• MacintoshisatrademarkofAppleComputer,Inc.
in the U.S. and other countries.
• Pentium is a trademark or registered trademark
of Intel Corporation.
Rechargeable battery pack
NP-FP50
All other product names mentioned herein may be
the trademarks or registered trademarks of their
respective companies. Furthermore, ™ and “®” are
not mentioned in each case in this manual.
Maximum output voltage
DC 8.4 V
Output voltage
DC 7.2 V
Capacity
Notes on the License
4.9 wh (680 mAh)
ANY USE OF THIS PRODUCT OTHER THAN
CONSUMER PERSONAL USE IN ANY
MANNER THAT COMPLIES WITH THE
MPEG-2 STANDARD FOR ENCODING VIDEO
INFORMATION FOR PACKAGED MEDIA IS
EXPRESSLY PROHIBITED WITHOUT A
LICENSE UNDER APPLICABLE PATENTS IN
THE MPEG-2 PATENT PORTFOLIO, WHICH
LICENSE IS AVAILABLE FROM MPEG LA,
L.L.C., 250 STEELE STREET, SUITE 300,
DENVER, COLORADO 80206.
Dimensions (Approx.)
31.8 × 18.5 × 45.0 mm
(1 5/16 × 3/4 × 1 13/16 in.)(w×h×d)
Mass (Approx.)
40 g (1.5 oz)
Operating temperature
0°C to + 40°C (32°F to 104°F)
Type
Li-ion
Design and specifications are subject to change
without notice.
35
|