Mobile HD Snap
Camera
For details on the advanced operations, please access
“Mobile HD Snap Camera Handbook” contained on
the supplied CD-ROM via a computer.
Instruction Manual
Before operating the unit, please read this manual thoroughly, and retain it for future reference.
MHS-PM1
© 2009 Sony Corporation
4-135-531-14(1)
For customers in the U.S.A. and
CANADA
For Customers in the U.S.A.
UL is an internationally recognized safety
organization.
The UL Mark on the product means it has been
UL Listed.
[ RECYCLING LITHIUM-ION
BATTERIES
Lithium-Ion batteries are
recyclable.
If you have any questions about this product, you
may call:
Sony Customer Information Center
1-800-222-SONY (7669)
The number below is for the FCC related matters
only.
You can help preserve our
environment by returning your
used rechargeable batteries to
the collection and recycling
location nearest you.
For more information regarding recycling of
rechargeable batteries, call toll free
[ Regulatory Information
Declaration of Conformity
Trade Name : SONY
Model No. : MHS-PM1
Caution: Do not handle damaged or leaking
Lithium-Ion batteries.
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo,
San Diego, CA 92127 U.S.A.
Telephone No.: 858-942-2230
[ Battery pack
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
This Class B digital apparatus complies with
Canadian ICES-003.
[ CAUTION
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
3
This product has been tested and found compliant
with the limits set out in the EMC Directive for
using connection cables shorter than 3 meters
(9.8 feet).
[ Note:
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the
equipment and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
[ Attention
The electromagnetic fields at the specific
frequencies may influence the picture and sound
of this unit.
[ Notice
If static electricity or electromagnetism causes
data transfer to discontinue midway (fail), restart
the application or disconnect and connect the
communication cable (USB, etc.) again.
[ Disposal of Old Electrical &
Electronic Equipment (Applicable
in the European Union and other
European countries with separate
collection systems)
– Consult the dealer or an experienced radio/TV
technician for help.
The supplied interface cable must be used with the
equipment in order to comply with the limits for a
digital device pursuant to Subpart B of Part 15 of
FCC Rules.
For the State of California, USA only
Perchlorate Material-special handling may apply,
See
This symbol on the product or on its packaging
indicates that this product shall not be treated as
household waste. Instead it shall be handed over
to the applicable collection point for the recycling
of electrical and electronic equipment. By
Perchlorate Material: Lithium battery contains
perchlorate.
ensuring this product is disposed of correctly, you
will help prevent potential negative consequences
for the environment and human health, which
could otherwise be caused by inappropriate waste
handling of this product. The recycling of
materials will help to conserve natural resources.
For more detailed information about recycling of
this product, please contact your local Civic
Office, your household waste disposal service or
the shop where you purchased the product.
For Customers in Europe
[ Notice for the customers in the
countries applying EU Directives
The manufacturer of this product is Sony
Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-
0075 Japan. The Authorized Representative for
EMC and product safety is Sony Deutschland
GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,
Germany. For any service or guarantee matters
please refer to the addresses given in separate
service or guarantee documents.
4
[ Disposal of waste batteries
(applicable in the European
Union and other European
countries with separate
collection systems)
[ Types of “Memory Stick” media
you can use with your camera
• For recording movies, it is recommended that
you use “Memory Stick PRO Duo” media of
512 MB or larger marked with:
–
–
*
* Marked with Mark2 or not, either can be used.
• “Memory Stick PRO Duo” media of up to
16 GB has been confirmed to operate correctly
with this camera.
This symbol on the battery or on the packaging
indicates that the battery provided with this
product shall not be treated as household waste.
By ensuring these batteries are disposed of
correctly, you will help prevent potentially
negative consequences for the environment and
human health which could otherwise be caused by
inappropriate waste handling of the battery. The
recycling of the materials will help to conserve
natural resources.
In case of products that for safety, performance or
data integrity reasons require a permanent
connection with an incorporated battery, this
battery should be replaced by qualified service
staff only.
“Memory Stick PRO Duo” media.
• “Memory Stick PRO Duo” media and “Memory
Stick PRO-HG Duo” media are both referred to
as “Memory Stick PRO Duo” media in this
manual.
[ Notes on recording/playback
• Before you start recording, make a trial
recording to make sure that the camera is
working correctly.
• This camera is neither dust-proof, nor splash-
proof, nor water-proof. Read “Precautions”
(page 35) before operating the camera.
To ensure that the battery will be treated properly,
hand over the product at end-of-life to the
applicable collection point for the recycling of
electrical and electronic equipment.
• Be careful not to get the camera wet. Water
entering the inside of the camera may cause
malfunctions which in some cases may not be
repairable.
For all other batteries, please view the section on
how to remove the battery from the product
safely. Hand the battery over to the applicable
collection point for the recycling of waste
batteries.
For more detailed information about recycling of
this product or battery, please contact your local
Civic Office, your household waste disposal
service or the shop where you purchased the
product.
• If you rotate the lens portion back when your
camera is connected to other devices with the
USB cable, the recorded images may be lost.
• Do not aim the camera at the sun or other bright
light. It may cause the malfunction of your
camera.
• Do not use the camera near a location that
generates strong radio waves or emits radiation.
The camera may not be able to record or play
back properly.
• Using the camera in sandy or dusty locations
may cause malfunctions.
Notes on using your camera
• If moisture condensation occurs, turn off the
camera and leave it for about an hour before
• Do not shake or strike the camera. In addition to
malfunctions and an inability to record images,
this may render the recording medium unusable,
or cause image data breakdown, damage or loss.
[ Internal memory and “Memory
Stick PRO Duo” media back up
Do not turn off the camera or remove “Memory
Stick PRO Duo” media while the access lamp is
lit, or the internal memory data or “Memory Stick
PRO Duo” media data may be destroyed. Always
protect your data by making a back up copy.
5
• When inserting or ejecting the “Memory Stick
PRO Duo” media, be careful so that the
“Memory Stick PRO Duo” media does not pop
out and drop.
• When connecting your camera to another device
with a cable, be sure to insert the connector plug
in the correct way. Pushing the plug forcibly
into the terminal will damage the terminal and
may result in a malfunction of your camera.
[ On image data compatibility
• This camera supports “MP4 format” as movie
file format. Therefore, movies recorded by this
camera cannot be played on devices that do not
support “MP4 format”.
• This camera does not support “AVCHD format”
and therefore is not compatible with the
playback and recording of movies in “AVCHD
format” like a Digital HD Video camera
recorder.
• Playback of movies other than those shot, edited
or composed on this camera is not guaranteed.
• Still images recorded by this camera are
compressed/recorded in JPEG*1 format. The file
extension is “.JPG”.
[ Notes on the LCD screen and
lens
• This camera conforms with DCF*2 universal
standard established by JEITA*
.
3
• The LCD screen is manufactured using
extremely high-precision technology, so over
99.99% of the pixels are operational for
effective use. However, there may be some tiny
black points and/or bright points (white, red,
blue or green in color) that constantly appear on
the LCD screen. These points are normal in the
manufacturing process and do not affect the
recording in any way.
• Playback of still images/movies recorded with
your camera on other equipment and playback
of still images recorded or edited with other
equipment on your camera are not guaranteed.
*
1 Joint Photographic Experts Group
*
2 Design rule for Camera File system
*
3 Japan Electronics and Information
Technology Industries Association
[ Note on disposal/transfer
[ On the overheat protection
When using software embedded in the camera,
personal information such as IDs and mail
addresses may be saved on the internal memory of
the camera. When transferring the camera to
others or on disposal, do so after deleting the
information input.
The power may go off automatically to protect the
camera depending on the temperature of the unit
or the battery pack. In this case, the message
appears on the screen before the power goes off.
If the message “Camera overheating Allow it to
cool” appears, the camera has been overheating.
The power will go off automatically. Place the
camera in a cool place until the temperature of the
camera grows colder.
[ About changing the language
setting
The on-screen displays in each local language are
used for illustrating the operating procedures.
Change the screen language before using your
[ Warning on copyright
Television programs, films, videotapes, and other
materials may be copyrighted. Unauthorized
recording of such materials may be contrary to the
provisions of the copyright laws.
[ About this manual
• The photographs used as examples of pictures in
this Handbook are reproduced images, and are
not actual images shot using this camera.
• Design and specifications of recording media
and other accessories are subject to change
without notice.
• The screenshots are from Windows XP. The
scenes may vary depending on the operating
system of the computer.
[ No compensation for contents of
the recording
The contents of the recording cannot be
compensated for if recording or playback is not
possible due to a malfunction of your camera or
recording media, etc.
6
Table of contents
2 Inserting the battery pack/“Memory Stick PRO Duo” media (sold
Viewing images ...................................................................................... 32
7
Enjoying the camera
Enjoying high definition images
The movies shot with this camera will be recorded in MPEG-4 AVC/H.264 Main Profile,
approximately 30 frames per second, Progressive, AAC LC, “MP4 format”.
– MPEG: Movie Picture Experts Group
– AVC: Advanced Video Codec
What is “MPEG-4 AVC/H.264”?
MPEG-4 AVC/H.264 is a standard of video camera, which uses highly efficient
image compression encoding technology to record HD (high definition) images.
Compared with the existing image compression encoding technology, MPEG-4
AVC/H.264 is able to compress images even more effectively.
• In the MPEG-4 AVC/H.264, the camera supports high definition images with effective
scanning lines of 1080 or 720. The number of recorded image pixel is 1440×1080 or 1280×720,
and the image is recorded in progressive mode*.
Progressive playback
The camera supports progressive mode*, which is used in computers, and therefore is suited
for playing back images on computers.
Shooting movies in image quality suited for your purpose
The camera supports the common and widely used VGA (640×480) as well as HD (high
definition) image quality. Select VGA (640×480) image quality to upload the recorded images
on websites or to attach to mails without the need to convert the image quality.
Movie size you can select with this camera
Movie Size
1080 30P
Usage guidelines
Shoot HD (high definition) quality movies in sizes suited for display on
computer or high definition TV
Shoot HD (high definition) quality movies in sizes suited for display on
computer
720 30P
VGA 30P
Shoot SD (standard definition) quality movies in sizes suited for uploading
on websites
* The progressive mode is a type of movie recording method, which reads out all image pixels at once.
8
Flow of use
B Getting started
For types of “Memory Stick PRO Duo” media, you can use with your camera, see
B Shooting in HD (high definition) image quality
Select the image size suited for your purpose. For the image size and image quality,
B Enjoying the recorded image
You can enjoy images in vivid and fine HD (high definition) image quality.
x Uploading images to your PC or on websites*
You can enjoy uploading images on network services, etc. By marking Sharemarks
on images with the camera, you can easily upload the images.
B Saving the recorded image*
When the capacity of “Memory Stick PRO Duo” media of the camera is full, the
camera cannot record new images anymore. It is recommended to constantly save
recorded images on computers and take backups.
* You can upload and save images by using the supplied software “PMB (Picture Motion Browser) ”. You
can also use the software “PMB Portable” embedded within the camera to upload images outside home.
For details on how to use the software, refer to the Help menu of the software.
9
Getting started
Checking the accessories supplied
• Battery charger BC-CSK/BC-CSKA (1)
• Component A/V cable (1)
• Power cord (mains lead) (1)
(not supplied in the USA and Canada)
• A/V connecting cable (1)
• USB cable (1)
• Wrist strap (1)
• Rechargeable battery pack NP-BK1 (1)
• CD-ROM (1) (page 23)
– PMB (Picture Motion Browser) including
PMB Guide (page 25)
– Mobile HD Snap Camera Handbook (PDF)
• Instruction Manual (this manual) (1)
Attach the strap and place your hand
through the loop to prevent the camera
from damage by being dropped, etc.
Hook
10
1 Preparing the battery pack
For customers in the USA and
Canada
For customers other than those in the USA and
Canada
Plug
1
2
2
1
CHARGE lamp
CHARGE lamp
Power cord (mains lead)
1Insert the battery pack into the battery charger.
• Insert the battery pack as far as it will go, then press the back of the battery pack gently until it clicks.
2Connect the battery charger to the wall outlet (wall socket).
The CHARGE lamp lights up, and charging starts.
When the CHARGE lamp turns off, charging is finished (Normal charge). Also, the CHARGE lamp
may turn off when the temperature is outside of the recommended operating temperature (10 to 30°C),
as the charger is on standby.
[ Charging time
Full charge time
Approx. 300 min.
• Time required to charge a fully depleted battery at a temperature of 25°C (77°F). Charging may take
longer under certain circumstances or conditions.
11
2 Inserting the battery pack/“Memory Stick PRO Duo” media
(sold separately)
Align the v mark of the
battery slot with the v
mark on the battery pack.
Press and hold the battery
eject lever and insert the
battery pack.
Battery/“Memory Stick Duo”
media cover
With the terminal side
facing the LCD screen,
insert the “Memory Stick
Duo” media until it clicks
into place.
1Open the battery/“Memory Stick Duo” media cover.
2Insert the “Memory Stick PRO Duo” media (sold separately) all the way in
until it clicks.
3Close the battery/“Memory Stick Duo” media cover.
[ When there is no “Memory Stick PRO Duo” media inserted
The camera records/plays back images using the internal memory (approx. 12 MB).
12
[ To remove “Memory Stick PRO Duo” media
Open the battery/“Memory Stick Duo” media cover.
Make sure that the access lamp
is not lit, then push the “Memory
Stick PRO Duo” media in once.
• Never remove “Memory Stick PRO Duo” media when the access lamp is lit. This may cause damage to
data in the “Memory Stick PRO Duo” media.
13
3 Turning the camera on/setting the clock
ON/OFF button
1
MENU button
LCD screen
1
2
Multi-selector
2
/
/
:
1Rotate the lens portion.
Rotating the lens portion in the arrow direction turns on the camera. To turn off the power, rotate it
back.
• You can also turn the power on by pressing ON/OFF button.
• The lens rotates within the range of 0 to 270 degrees.
2Set the clock with the multi-selector.
1 Select the date display format with v/V, then press the multi-selector.
2 Select each item with b/B and set the numeric value with v/V.
3 Select [OK] with B, then press the multi-selector.
To turn the power off
Press ON/OFF button.
• You can also turn the power off by rotating the lens portion back.
[ To change the date and time
Press MENU and select [Clock Set] in
2
[ To change the language
Press MENU and select [ Language] in
1
• You can turn off the operation beeps by selecting [Beep] in
1
14
Shooting images easily
MENU button
Power lamp
ON/OFF button
MOVIE button
Zoom lever
PHOTO button
(Play) button
Multi-selector
1Rotate the lens portion to turn the power on.
You can also turn the power on by pressing ON/OFF.
2Confirm the composition.
Position the subject in the center of the screen.
3Start shooting.
When shooting still images:
Press PHOTO.
In pressing PHOTO (4:3)
In standby
• You can only check the angle of view by pressing PHOTO half-way. To shoot still images, press
PHOTO fully.
• The angle of view switches to the aspect ratio (4:3 or 3:2) according to the shooting size of the still
image.
15
• Black bands appear on the top and bottom of the image in the following situations:
–When the image size is either [1080 30P] or [720 30P].
–When the aspect ratio is 3:2.
• You cannot shoot still images while shooting movies.
• When shooting still images, the angle of view will change from that in shooting standby.
When shooting movies:
Press MOVIE.
To stop recording, press MOVIE again.
• Black bands appear on the top and bottom of the image when the image size is either [1080 30P] or
[720 30P].
• Continuous shooting is possible for approximately 25 minutes.
16
Useful functions for shooting
• The image may become distorted when you
rotate the lens portion from the front to the same
direction the LCD screen is facing, or in the
opposite way.
[ W/T Using the zoom
Slide the zoom lever toward T to zoom in,
slide the zoom lever toward W to zoom out.
• This camera is only capable of digital zoom.
[ Changing the screen display
Each time you tilt the multi-selector to v
(DISP), the display changes as follows.
• When using the zoom, the image may not zoom
in or zoom out smoothly.
• When the movie is shot in the size of [1080
30P], the zoom scale the camera enlarges will be
up to approximately 2×.
Histogram on*
• When the movie is shot in the size of either
[1080 30P] or [720 30P] and the camera is
connected to a TV, etc, with the Component
A/V cable at the same time, the zoom function
will be unavailable.
r
Indicators off
r
Indicators on
* During playback, the image information is
displayed.
[
Using the self-timer
Tilt the multi-selector to V ( ).
(No indicator): Not using the self-timer
: Using the self-timer
[ Selecting the image size
Press
(Image size) button to select
(Movie Size) with
(Photo Size) or
If you press PHOTO, countdown timer is
displayed, and after rapid beep sounds are
heard, the camera will shoot.
the multi-selector tilt to b/B, then select
the desired image size with v/V.
To turn off the Image Size menu, press the
(Image size) button again.
[ Recording in mirror mode
(Photo Size):
5M:
For prints up to A4 (8×10")
3:2:
Shoot in 3:2 aspect ratio
3M:
For prints up to 10×15 cm (4×6") or
13×18 cm (5×7")
2M:
For prints up to 10×15 cm (4×6")
VGA:
Rotate the lens portion to the same direction
the LCD screen is facing.
Shoot at a small image size for e-mail
attachment
• A mirror-image of the subject appears on the
LCD screen, but the image will be normal when
recorded.
(Movie Size):
1080 30P:
• The same image as those recorded appears on
the LCD screen instead of the mirror-image in
playback mode.
Shoot HD (high definition) quality movies in
sizes suited for display on computer or high
definition TV
17
720 30P:
Shoot HD (high definition) quality movies in
sizes suited for display on computer
VGA 30P:
Shoot SD (standard definition) quality movies
in sizes suited for uploading on websites
[ Selecting a shooting mode
Press MENU, then select the desired item in
Auto:
Allows easy shooting with the settings
adjusted automatically.
Scene Selection:
Allows you to shoot with the preset settings
according to the scene.
Scene Selection
Backlight
Shoots strongly backlight scenes.
Low Light
.
Suitable for shooting in dark places.
Landscape
Focuses on a distant subject.
Sports
Shoots moving subjects outdoors or in other
bright places.
18
Viewing/Editing images
MENU button
Power lamp
ON/OFF button
(Delete) button
(Sharemark) button
Zoom lever
(Play) button
Multi-selector
1Rotate the lens portion to turn the power on.
You can also turn the power on by pressing ON/OFF.
2Press
(Play) button to set the camera to playback mode.
Index screen appears.
3Select the image you want to playback with the multi-selector tilt to v/V/b/B.
Still image:
Press the multi-selector.
• A still image is displayed.
Movie:
Press the multi-selector to pause and playback a movie.
Tilt to B to fast forward, b to rewind. (Press the multi-selector to return to normal playback.)
Tilt to V to display the volume control screen, then adjust the volume with b/B.
• When shooting movies of fast moving subjects, such as a sport scene, the movie may not be played
back smoothly.
• When the playback of the first movie ends, the playback of the next movie automatically starts. When
the playback of the last movie ends, playback of movies will end.
[ To view an enlarged image (playback zoom)
Slide the zoom lever toward T while displaying a still image.
To undo the zoom, slide the zoom lever toward W.
Adjust the position: v/V/b/B
Cancel playback zoom: Press the multi-selector.
To return to the index screen
Slide the zoom lever toward
playback of a movie.
(Index) while displaying a still image or pausing the
[ To delete images
1 Press
(Play) button to set the camera to playback mode.
Index screen appears.
19
2 Press
(Delete) and select [Select] with v/V, then press the multi-selector.
3 Select the images you want to delete with v/V/b/B, then press the multi-selector to
display the
4 Press
(Delete) indicator on the selected image.
(Delete).
5 Select [OK] with B, then press the multi-selector.
• To delete all the images in the folder, select [All In This Folder] with v/V in step 2 instead of [Select],
then press the multi-selector.
To delete images while a single image is displayed
1 Press
(Delete).
2 Select [Delete] with v, then press the multi-selector.
[ To view images on TV screen
The connection or the image quality (HD (high definition)/SD (standard definition)) varies
depending on the type of TV or input jacks the camera is connected to.
Connecting to a high definition TV
Images recorded with HD (high definition) image quality are played back with HD (high
definition) image quality. Images recorded with SD (standard definition) image quality are
played back with SD (standard definition) image quality.
Green/Blue/Red
White/Red
Component A/V cable
(supplied)
A/V OUT jack
• If you connect only component video plugs, audio signals are not output. Connect the white and red plugs
to output audio signals.
• The output settings switches automatically according to the images played back. Therefore, the image
may be distorted when switching the mode on the connected TV.
• If you record movies in HD (high definition) image quality [1080 30P]/[720 30P] while connecting the
camera to a high definition TV with a component cable, the image output to the TV is shown in SD image
quality.
20
Connecting to a non-high-definition 16:9 (wide) or 4:3 TV
Images recorded with HD (high definition) quality is converted to SD (standard definition)
and played back. Images recorded with SD (standard definition) image quality are played back
with SD (standard definition) image quality.
Yellow/White/Red
A/V connecting cable
(supplied)
A/V OUT jack
• During playback of a movie at HD (high definition) on SD (standard definition) TV, the movie is
displayed with black space on the upper and lower sides.
[ To select images to upload on a website (Sharemark)
1 Press
(Play) button to set the camera to playback mode.
Index screen appears.
2 Press
(Sharemark) button and select [Select] with v/V, then press the multi-selector.
3 Select the images you want to upload on a website with v/V/b/B, then press the multi-
selector to display indicator on the selected image.
4 Press (Sharemark).
5 Select [OK] with B, then press the multi-selector.
The (Sharemark) indicator turns white.
• To select all the images in the folder, select [All In This Folder] with v/V in step 2 instead of [Select],
then press the multi-selector.
• The file size of movies shot at HD (high definition) is large and therefore it may take time to upload.
Movies shot at [VGA 30P] is recommended for uploading on websites.
• To select images to upload on a website while a single image is displayed, display the image you want
to upload and press
(Sharemark) button. The
indicator is marked to the image.
• To remove the Sharemark from an image, select the image to remove the Sharemark and take the
same steps as when marking a Sharemark on an image.
• By using the software “PMB Portable” embedded in the camera, you can easily upload images
21
Changing the settings – Menu/Setup
Menu items
MENU button
The available menu items vary depending
on the shooting mode.
The shooting menu is available only in the
shooting mode, and the viewing menu is
available only in the playback mode.
For details on the menu items, see “Mobile
HD Snap Camera Handbook” (PDF).
Multi-selector
[ Menu for shooting
1Press MENU to display the menu.
Camera
Setup
2Select the desired menu item with
[ Menu for viewing
the multi-selector tilt to b/B.
(Folder)
(Protect)
DPOF
(Rotate)
(Divide)
(Setup)
(Slide)
[ Setup items
Camera
• In shooting mode,
cannot set an item with
gray.
/
is indicated. You
indicator in
Function Guide
Auto Review
Flicker Cancel
/
• In playback mode, press the multi-selector
after setting an item.
Memory Stick Tool
Format
Change REC. Folder
Create REC. Folder Copy
Internal Memory Tool
Format
3Select a setting with v/V.
4Press MENU to turn off the menu.
[ To select a Setup item
Setup 1
1
1 Press MENU.
LCD Backlight
Beep
Language
Initialize
2 Select
tilt to B.
(Setup) in step 2 and then
3 Select the item to set with v/V/b/B,
then tilt to B.
Setup 2
2
File Number
Video Out
Clock Set
USB Connect
22
Enjoying your computer
Viewing “Mobile HD Snap Camera
Handbook” (PDF)
What you can do with a Windows
computer
For advanced use of your camera, see
“Mobile HD Snap Camera Handbook”
(PDF).
Take either of the following ways to
connect the camera with a Windows
computer and enjoy the functions.
To view “Mobile HD Snap Camera
Handbook” (PDF), you need to install
Adobe Reader on your computer.
[ When using various functions
By using the software “PMB (Picture
Motion Browser)” in the supplied CD-
ROM, you can enjoy the following
operations.
• Importing images taken with your camera
to a computer
• Viewing imported images on a computer
• Creating a disc with edited images
• Changing the language displayed in
“PMB Portable”
[ For Windows users
1
2
Turn on the computer.
Place the CD-ROM (supplied) in the
disc drive of your computer.
The select screen for installation appears.
Click [Handbook (PDF)].
3
4
The installation screen for “Mobile HD
Snap Camera Handbook” (PDF) appears.
Select the desired language and the
model name of your camera, then click
[Handbook (PDF)].
[ Environment for using “PMB”
and “PMB Portable”
*
1
OS: Microsoft Windows XP SP3 /
Installation starts. When the installation is
completed, the short-cut icon of “Mobile
HD Snap Camera Handbook” appears on
the desktop of your computer.
• The model name of your camera is printed
on its bottom surface.
Windows Vista SP1*
2
*
1 64-bit editions and Starter (Edition) are not
supported.
2 Starter (Edition) is not supported.
*
• Standard installation is required.
• Operation is not assured if the above OS has
been upgraded or in a multi-boot environment.
• The driver for Web Camera does not support
64-bit editions of both Windows XP and Vista.
5
Click [Exit] t [Exit], then remove the
CD-ROM from the disc drive of your
computer.
CPU: Intel Pentium III 800 MHz or faster
(When playing/editing high definition
movies: Intel Pentium 4 2.8 GHz or
faster, Intel Pentium D 2.8 GHz or faster,
Intel Core Duo 1.66 GHz or faster, Intel
Core 2 Duo 1.20 GHz or faster)
[ For Macintosh users
1
2
Turn on the computer.
Place the CD-ROM (supplied) in the
disc drive of your computer.
3
Open the [Handbook] folder in the CD-
ROM, double-click the [GB] folder and
then drag-and-drop the “Handbook.pdf”
on the computer.
Memory: 512 MB or more (When playing/
editing high definition movies: 1 GB or
more)
Video Memory: 32 MB or more (64 MB
or more is recommended)
Double-click “Handbook.pdf” to view the
handbook.
Hard disk: Disk volume required for
installation: Approximately 500 MB*
23
The installation menu screen appears.
Display: DirectX 7 or later-compatible
video card, Minimum 1,024 × 768 dots
Others: USB port (this must be
provided as standard, Hi-Speed USB
(USB 2.0 compatible))
* For “PMB Portable”, the disk volume required
on using the program temporarily is
approximately 1 GB.
[ Note on playback of movie files
• If it does not appear, double-click [Computer]
(in Windows XP, [My Computer]) t
(SONYPICTUTIL).
• The AutoPlay screen may appear. Select “Run
Install.exe.” and follow the instructions that
appear on the screen to proceed with the
installation.
2 Click [Install].
The “Choose Setup Language” screen appears.
3 Select the desired language, then click
[Next].
(MPEG-4 AVC/H.264)
To play back and editing movie files
(MPEG-4 AVC/H.264) recorded by the
camera, you need to install the software
compatible with MPEG-4 AVC/H.264 or
“PMB” on your computer.
• Even under a PC environment where operations
are guaranteed, sometimes images cannot be
played back smoothly due to dropped frames.
Note that the transferred image itself is not
affected.
The “License Agreement” screen appears.
4 Read the agreement carefully. If you
• If you are using a notebook PC, be sure to use
the PC with the AC adaptor plugged in.
accept the terms of the agreement, click
the radio button next to [I accept the
terms of the license agreement] and then
click [Next].
5 Follow the instructions on the screen to
complete the installation.
• When the restarting confirmation message
appears, restart the computer following the
instructions on the screen.
Sometimes normal operations are not possible
due to the power savings function of the PC.
b Note
• Operations are not guaranteed, even on
computers fulfilling the above system
requirements. For example, other open or
background applications currently running may
limit product performance.
[ Installing “PMB”
You can install “PMB” using the following
procedure.
• Log on as Administrator.
1 Turn on your computer, and insert the
• DirectX may be installed depending on the
system environment of your computer.
6 Remove the CD-ROM after the
installation is complete.
CD-ROM (supplied) into the CD-ROM
drive.
24
When you connect the camera and your
computer, AutoPlay Wizard appears.
Click [×] to close the AutoPlay Wizard for any
unnecessary drives.
• If the desired AutoPlay Wizard does not
appear, click [Computer] (in Windows XP,
[My Computer]) t [PMBPORTABLE], then
double-click “PMB_P.exe”.
[ Operating the “PMB”/Viewing the
“PMB Guide”
After you install the software, shortcut
icons for “PMB” and “PMB Guide” are
created on the desktop.
For the basic operation of “PMB”, see
“PMB Guide”.
2 Click “PMB Portable” (in Windows XP,
[PMB Portable] t [OK]).
Double-click to start “PMB”.
The Language Selection screen appears.
3 Select the desired language, then click
Double-click to start “PMB
Guide”.
[OK].
The Region Selection screen appears.
4 Select the appropriate [Area] and
[Country/Region], and then click [OK].
The User Agreement screen appears.
5 Read the agreement carefully. If you
accept the terms of the agreement, click [I
Agree].
• If the icon is not displayed on the computer
screen, click [Start] t [All Programs] t
[Sony Picture Utility] t [PMB] to start “PMB”
or click [Start] t [All Programs] t [Sony
Picture Utility] t [Help] t [PMB Guide].
You can also open “PMB Guide” from [Help] of
“PMB”.
“PMB Portable” starts up.
b Notes
[ Operating the “PMB Portable”
This camera has an application “PMB
Portable”.
You can use this application to do the
following:
• You can easily upload images to a blog or other
media service.
• Always connect to a network when using “PMB
Portable”.
• When uploading images over the Internet, the
cache may remain in the computer being used
depending on the service provider. This is also
true when this camera is used for this purpose.
• When a bug occurs in “PMB Portable” or you
delete “PMB Portable” by mistake, you can
repair “PMB Portable” using “PMB”. For
• You can easily filter the images you want to
upload by registering them in the camera as
• You can upload images from a computer
connected to the Internet even when you are
away from home or the office.
• You can easily register the media services (such
as blogs) you use frequently.
For details on “PMB Portable”, see the
“PMB Portable” help.
[ Notes on “PMB Portable”
“PMB Portable” makes it possible to
download the URLs of a number of
websites from the server administered by
Sony (the “Sony server”).
In order to use “PMB Portable” to enjoy the
benefits of the image uploading service or
other services (the “services”) provided by
these and other websites, you must consent
to the following.
• Some websites require registration procedures
and/or fees to use their services. In using such
services, you must comply with the terms and
conditions established by the websites
concerned.
When using “PMB Portable” for the first
time, you must select the language. Follow
the procedure below to make the selection.
Once the language selection has been made,
steps 3 to 5 are unnecessary the next time
you use “PMB Portable”.
1 Make a USB connection between the
camera and a computer.
25
• Services may be terminated or changed in
accordance with the convenience of the website
operators. Sony will not be held responsible for
any trouble occurring between the users and
third parties or any inconvenience caused to
users relating to the utilization of the services
inclusive of the termination of or changes to
such services.
[ To disconnect the USB cable
1
Click the [Unplug or eject hardware]
icon on the task tray on the bottom right
of the desk top.
• To view a website, you will be redirected to it
by the Sony server. There may be times when
you cannot access the website because of server
maintenance or for other reasons.
• If the operation of the Sony server is to be
terminated, you will be notified of the
termination ahead of time on Sony’s website,
etc.
2
Click [Safely remove USB Mass
Storage Device].
• The URLs to which you are redirected by the
Sony server and other information may be
recorded for the purposes of improving Sony’s
future products and services. However, no
personal data will be recorded on such
occasions.
• To display the License Agreement screen of
“PMB Portable”, double-click [APP] folder in
the external drive (PMBPORTABLE), double-
click [EULA], and then select the language of
your choice.
Disconnect the USB cable from the
camera and the computer.
b Notes
• Before turning off your camera, disconnect the
USB cable following the proper procedures
described above.
• Disconnect the USB cable using the proper
procedures described above. Otherwise, files
stored on the “Memory Stick PRO Duo” media
may not be updated correctly. Also,
disconnecting the USB cable improperly may
cause a malfunction of the “Memory Stick PRO
Duo” media.
[ Recommended USB cable
connection
To assure the proper functioning of your
camera, connect your camera to a computer
as below.
• Connect the (USB) jack of the camera and a
computer using the USB cable. Do not connect
anything to other USB ports of a computer.
• When connecting to a computer with a USB
keyboard and USB mouse connected as standard
equipment, connect the camera to another USB
port using the USB cable.
b Notes
• Operations are not guaranteed when multiple
USB devices are connected to a computer.
• Be sure to connect the USB cable to a USB port.
If the USB cable is connected to a computer via
a USB keyboard or USB hub, operations are not
guaranteed.
26
2 Copy image files to the Macintosh
computer.
Using your Macintosh computer
1 Double-click the newly recognized
icon t [DCIM] (still images) or
[MP_ROOT] (movies) t the folder
where the images you want to copy
are stored.
You can copy images to your Macintosh
computer.
• “PMB” is not compatible with Macintosh
computers.
2 Drag and drop the image files to the
hard disk icon.
The image files are copied to the
hard disk.
Recommended computer environment
The following environment is
recommended for a computer connected to
the camera.
• For details on the storage location of the
images and file names, see “Mobile HD
Snap Camera Handbook”.
OS (pre-installed): Mac OS 9.1/9.2/ Mac
OS X (v10.1 to v10.5)
USB jack: Provided as standard
3 View images on the computer.
b Notes
• Operations are not guaranteed for all the
recommended computer environments
mentioned above.
• Double-click the hard disk icon t the
desired image file in the folder containing
the copied files to open that image file.
To delete the USB connection
Perform the procedures listed below
beforehand when:
• Disconnecting the USB cable
• Removing “Memory Stick PRO Duo” media
• Inserting “Memory Stick PRO Duo” media into
the camera after copying images from the
internal memory
• If you connect two or more USB devices to a
single computer at the same time, some devices,
including your camera, may not operate
depending on the types of USB devices you are
using.
• Operations are not guaranteed when using a
USB hub.
• Connecting your camera using a USB interface
that is compatible with Hi-Speed USB (USB 2.0
compliant) allows advanced transfer (high speed
transfer) as this camera is compatible with Hi-
Speed USB (USB 2.0 compliant).
• Turning off the camera
Drag and drop the drive icon or the icon of the
“Memory Stick PRO Duo” media to the
“Trash” icon.
• Only [Mass Storage] mode is available for the
USB connection of this camera.
• When your computer resumes from the suspend
or sleep mode, communication between your
camera and your computer may not recover at
the same time.
The camera is disconnected from the computer.
Copying and viewing images on a
computer
1 Prepare the camera and a Macintosh
computer, then connect the supplied USB
cable.
27
Indicators on the screen
Each time you tilt the multi-selector to v
A
Display
Indication
Battery remaining
In shooting standby
Shooting mode
• When switching to the
shooting mode,
appears for approximately
two seconds.
Zoom scaling
Shooting mode (Scene
Selection)
.
When recording movies
Low battery warning
Image size
E
When playing back still images
/
/
/
Playback/Stop/Slide Show
fast forward
Fast forward/Rewind
00:00:00
VOL.
Counter
Volume
When playing back movies
28
B
Display
Indication
Display
Indication
Print order (DPOF) mark
Image size
Protect
Still image shooting mode
D
[400]
Remaining number of
recordable images
Display
Indication
Self-timer
Image size
Menu/Guide menu
DPOF
• Pressing MENU switches
the menu/guide menu on/
off.
+2.0EV
Exposure Value
Playback bar
[00:28:25]
Remaining recordable
time
101_0012
Folder-file number
Recorded date/time of the
playback image
2009 1 1
9:30 AM
Movie shooting mode
White balance
Select images
BACK/
NEXT
2000
Shutter speed
Aperture value
ISO number
Adjust volume
VOLUME
F3.6
ISO400
C
Display
Indication
E
Recording folder
• This does not appear when
using internal memory.
Display
Indication
Movie recording
Recording time
00:00:05
Recording/Playback Media
b Note
Histogram
• Indicators and their positions are approximate
and differ from what you actually see.
•
appears when histogram
display is disabled.
Change folder
• This does not appear when
using internal memory.
Playback folder
• This does not appear when
using internal memory.
12/12
Image number/Number of
images recorded in selected
folder
Shooting mode
Sharemark
29
Battery life and memory capacity
Battery life and the available
recording and playback time
Sufficient power remaining
o
o
o
The tables show the approximate time
(min.) that the images can be recorded/
played back with the battery at full capacity
and at an ambient temperature of 25°C
(77°F).
Charge the battery.
(The warning indicator
flashes.)
Note that the available recording and
playback time may be less than those
indicated in the table depending on the
conditions of use.
• Battery capacity decreases as you use it more, as
the time passes.
• The available recording and playback time and
the battery life are decreased under the
following conditions:
• It takes about one minute until the correct
battery remaining indicator appears.
• The displayed battery remaining indicator may
not be correct under certain circumstances.
– The surrounding temperature is low.
– The camera has been turned on and off many
times.
– The zoom is used frequently.
– [LCD Backlight] is set to [Bright].
– The battery power is low.
[ Approximate recording/playback
time (min.)
Recording time*
1
Continuous recording time
100
110
150
Typical recording time*
2
Playback time
*
1
Shooting movies continuously with an image
size of [720 30P]
Typical recording time shows the time when
you repeat recording start/stop, turning the
power on/off and zooming.
*
2
[ To check the remaining battery
time
Rotate the lens portion or press ON/OFF
button to turn on and check the remaining
battery on the LCD screen.
The remaining amount of battery is shown
as follows:
30
The approximate recording time of movies in
the default setting
The table below shows the approximate
maximum recording times. These are the
total times for all movie files. Continuous
shooting is possible for approximately 25
minutes.
Number of still images and
recording time of movies
The number of still images and the length
of time for movies may vary depending on
the shooting conditions.
(Units: hour : minute : second)
The approximate number of still images in the
default setting
Movie size
Capacity
720 30P
(Units: Images)
Internal memory
Photo size
Approx. 12 MB
0:00:20
(0:00:10)
Capacity
5M
Internal memory
“Memory Stick PRO Duo” media formatted with
this camera
Approx. 12 MB
3
512 MB
0:15:00
(0:07:00)
“Memory Stick PRO Duo” media formatted with
this camera
1 GB
0:30:00
(0:15:00)
128 MB
256 MB
512 MB
1 GB
50
95
2 GB
1:00:00
(0:30:00)
190
390
770
1550
3100
6200
4 GB
2:05:00
(1:05:00)
2 GB
8 GB
4:10:00
(2:10:00)
4 GB
8 GB
16 GB
8:30:00
(4:25:00)
16 GB
• When the number of remaining shootable
images is greater than 9,999, the “>9999”
indicator appears.
• When images recorded using earlier Sony
models are played back on this camera, the
display may differ from the actual image size.
• All numbers measured when using “Memory
Stick PRO Duo” media made by Sony
Corporation. The number of still images and the
length of time for movies may vary depending
on the shooting conditions and the recording
media.
• The number in ( ) is the minimum recordable
time.
• All numbers are measured when using “Memory
Stick PRO Duo” media made by Sony
Corporation. The recordable time for movies
varies depending on the recording conditions,
subject conditions, and the type of “Memory
Stick” media.
• Before the continuous shooting ends, the
recording time indicator flashes, and after a
while, the recording will automatically stop.
Your camera uses the VBR (Variable Bit Rate)
format to automatically adjust image quality to
suit the recording scene. This technology
causes fluctuations in the recording time of the
“Memory Stick PRO Duo” media. Movies
containing quickly moving and complex
images are recorded at a higher bit rate, and
this reduces the overall recording time.
• When measuring media capacity, 1 GB equals
1 billion bytes, a portion of which is used for
data management.
31
Troubleshooting
• The displayed battery remaining differs
from the current one. Fully discharge
and then charge the battery to correct
the display.
• The battery is discharged. Charge the
If you experience trouble with your camera,
try the following solutions.
1Check the items below, and refer
to “Mobile HD Snap Camera
Handbook” (PDF).
The CHARGE lamp flashes while
charging the battery pack.
2Turn the power off, and turn it on
again after about one minute.
• Remove the battery pack being charged,
and then insert the same battery pack
into the battery charger securely again.
• The temperature may be outside of the
recommended operating temperature.
Charge the battery pack in an
recommended ambient temperature of
between 10°C to 30°C (50°F to 86°F).
(BC-CSKA only)
3Consult your Sony dealer or local
authorized Sony service facility.
When repairing the camera, we may check
a minimum amount of data stored on the
internal memory in order to improve the
condition. However, Sony dealer will
neither copy nor save your data.
Battery and power
Shooting still images/movies
Cannot turn on the camera.
Your camera cannot record images.
• The battery is discharged. Charge the
• Check whether the battery is inserted in
• Check the free capacity of the internal
memory or “Memory Stick PRO Duo”
the following:
– Change the “Memory Stick PRO
Duo” media.
• Continuous shooting is possible for
approximately 25 minutes.
The power turns off suddenly.
• If you do not operate the camera for
about five minutes while the power is
on, the camera turns off automatically
to prevent wearing down the battery.
• The power may go off automatically to
protect the camera depending on the
temperature of the unit or the battery
pack. In this case, the message appears
on the screen before the power goes off.
• Press
(Play) button and set the
camera to shooting mode to shoot a still
image or a movie.
Viewing images
Your camera cannot playback
images.
The battery remaining indicator is
incorrect.
• Press
(Play) button to change to the
• The folder/file name has been changed
on your computer.
• This phenomenon occurs when you use
the camera in an extremely hot or cold
location.
32
• When an image file has been processed
by a computer or when the image file
was recorded using a model other than
that of your camera, playback on your
camera is not guaranteed.
Cannot use the Web Camera
• The camera and a computer are
connected with USB cable before the
USB driver is installed.
Follow the steps below to uninstall the
driver not recognized correctly and
install the USB driver again.
• The camera is in USB mode. Delete the
USB connection.
Log on to the computer with the user ID
of the administrator authority.
Computers
1
Make sure the camera is connected to the
computer.
You cannot install “PMB”.
• Check the computer environment
required to install “PMB”.
• Install “PMB” in an orderly manner
2
3
Click [Start].
Right-click [My Computer] and click
[Property].
• Change the USB mode of the camera to
[Mass Storage].
[System Property] screen will appear.
4
Click the [Hardware] tab and click [Device
Manager].
“PMB Portable” does not start.
5
6
Click [View] and click [Devices by type].
• Change the USB mode of the camera to
[Mass Storage].
If the driver below, not correctly
recognized, is installed, right-click it and
click [Uninstall].
• [Sony Webcam] in [Imaging devices]
“PMB” does not work correctly.
7
8
9
When [Confirm Device Removal] screen
appears, click [OK] and delete it.
• Finish “PMB” and restart your
computer.
Turn off the power of the camera, remove
the USB cable, and re-start the computer.
Your camera is not recognized by
the computer.
Insert the CD-ROM into the disk drive.
10 Re-install the USB driver by taking the
• Disconnect devices from the USB jack
of the computer other than the
keyboard, mouse, and your camera.
• Disconnect the USB cable from the
computer and the camera, and restart
the computer, then connect the
computer and your camera again in an
• Make sure the media check tool of the
computer activates. For details on the
media check tool, see “PMB Guide”
following steps.
1Double-click [My Computer].
2Right-click
[SONYPICTUTIL(E:)](disk drive)*.
* The driver letter (such as (E:)) may differ
depending on the computer you are
using.
3Click [Open], double-click [USB
Driver] and then double-click
[setup.exe].
33
b Notes
• The computer may not operate properly when
you delete devices other than [USB Composite
Device], [USB Audio Device], or [USB
Device].
• Press MENU and select
(Setup 2) t [USB Connect] t [Web Camera],
(Setup) t
2
• The Web Camera function is not available for
“PMB”.
34
Precautions
the same battery pack into the battery charger
securely again.
[ Do not use/store the camera in
the following places
When the CHARGE lamp flashes fast again,
this may indicate a battery error or that a battery
pack other than the specified type has been
inserted. Check that the battery pack is the
specified type.
• In an extremely hot, cold or humid place
In places such as in a car parked in the sun, the
camera body may become deformed and this
may cause a malfunction.
If the battery pack is the specified type, remove
the battery pack, replace it with a new one or
another one and check if the battery charger
operates correctly. If the battery charger
operates correctly, a battery error may have
occurred.
• When the CHARGE lamp flashes slowly, it
indicates that the battery charger stops charging
temporarily on standby. The battery charger
stops charging and enters the standby status
automatically when the temperature is outside of
the recommended operating temperature.
When the temperature gets back within the
appropriate range, the battery charger resumes
charging and the CHARGE lamp lights up
again. We recommend charging the battery pack
in an ambient temperature of between 10°C to
30°C (50°F to 86°F). (BC-CSKA only)
• Under direct sunlight or near a heater
The camera body may become discolored or
deformed, and this may cause a malfunction.
• In a location subject to rocking vibration
• Near strong magnetic place
• In sandy or dusty places
Be careful not to let sand or dust get into the
camera. This may cause the camera to
malfunction, and in some cases this malfunction
cannot be repaired.
[ On carrying
Do not sit down in a chair or other place with the
camera in the back pocket of your trousers or
skirt, as this may cause malfunction or damage the
camera.
[ On the battery pack
[ On cleaning
Cleaning the LCD screen
Wipe the screen surface with an LCD cleaning kit
(sold separately) to remove fingerprints, dust, etc.
• Avoid rough handling, disassembling,
modifying, physical shock, or impact such as
hammering, dropping or stepping on the battery
pack.
• Do not use a deformed or damaged battery pack.
Cleaning the lens
Wipe the lens with a soft cloth to remove
fingerprints, dust, etc.
[ On the battery charger
Cleaning the camera surface
• Do not charge battery packs other than an NP-
BK type battery pack in the battery charger
supplied with the camera. Batteries other than
the specified kind may leak, overheat, or
explode if you attempt to charge them, posing a
risk of injury from electrocution and burns.
• Remove the charged battery pack from the
battery charger. If you leave the charged battery
pack in the charger, battery life may be
shortened.
• The CHARGE lamp of the supplied battery
charger flashes in either way:
– Fast flashing: Turns the light on and off
repeatedly at the interval of 0.15 seconds.
– Slow flashing: Turns the light on and off
repeatedly at the interval of 1.5 seconds. (BC-
CSKA only)
Clean the camera surface with a soft cloth slightly
moistened with water, then wipe the surface with
a dry cloth. Do not use the following or they may
damage the finish or the casing.
• Chemical products such as thinner, benzine,
alcohol, disposable cloths, insect repellent,
sunscreen or insecticide, etc.
• Do not touch the camera with the above on your
hand.
• Do not leave the camera in contact with rubber
or vinyl for a long time.
[ On operating temperatures
Your camera is designed for use under the
temperatures between 0°C and 40°C (32°F and
104°F). Shooting in extremely cold or hot places
that exceed this range is not recommended.
• When the CHARGE lamp flashes fast, remove
the battery pack being charged, and then insert
35
[ On moisture condensation
If the camera is brought directly from a cold to a
warm location, moisture may condense inside or
outside the camera. This moisture condensation
may cause a malfunction of the camera.
If moisture condensation occurs
Turn off the camera and wait about an hour for the
moisture to evaporate. Note that if you attempt to
shoot with moisture remaining inside the lens, you
will be unable to record clear images.
[ On disposing the battery
Contact the nearest Sony dealer when disposing
the battery.
[ On the internal rechargeable
backup battery
This camera has an internal rechargeable battery
for maintaining the date and time and other
settings regardless of whether the power is on or
off.
This rechargeable battery is continually charged
as long as you are using the camera. However, if
you use the camera for only short periods, it
discharges gradually, and if you do not use the
camera at all for about one week it becomes
completely discharged. In this case, be sure to
charge this rechargeable battery before using the
camera.
However, even if this rechargeable battery is not
charged, you can still use the camera, but the date
and time will not be indicated.
Charging method of the internal
rechargeable backup battery
Insert charged battery pack in the camera, and
then leave the camera for 24 hours or more with
the power off.
36
Specifications
Speaker: Monaural
Exif Print: Compatible
PRINT Image Matching III: Compatible
Camera
[System]
Image device: 7.13 mm (1/2.5 type) CMOS
sensor
Total pixel number of camera:
BC-CSK/BC-CSKA battery charger
Power requirements: AC 100 V to 240 V,
50 Hz/60 Hz, 2.2 W (BC-CSK)/2.3 W (BC-
CSKA)
Output voltage: DC 4.2 V, 0.33 A (BC-CSK)/
0.30 A (BC-CSKA)
Operating temperature: 0 to 40°C (32 to 104°F)
Storage temperature: –20 to +60°C (–4 to+140°F)
Dimensions: Approx. 62 × 24 × 91 mm (2 1/2 ×
31/32 × 3 5/8 inches) (W/H/D)
Mass: Approx. 75 g (2.7 oz) (BC-CSK)/Approx.
70 g (2.5 oz) (BC-CSKA)
Approx. 5 040 000 (2 592 × 1 944) pixels
Effective pixel number of camera:
Approx. 5 040 000 (2 592 × 1 944) pixels
(still images), Approx. 2 074 000 pixels
([1080 30P] movie)
Lens: F3.6
f = 7.0 mm (9/32 inches)
When converted to a 35 mm still camera
For movies: 47 mm (1 7/8 inches) (16:9)
For still images: 42 mm (1 11/16 inches) (4:3)
Exposure control: Automatic exposure, Scene
Selection (4 modes)
Rechargeable battery pack
NP-BK1
File format:
Still images: Exif Ver. 2.21 JPEG compliant,
DCF compliant
Movies: MPEG-4 compliant (.MP4)
Video codec type: MPEG-4 AVC/
H.264 Main Profile
Used battery: Lithium-ion battery
Maximum output voltage: DC 4.2 V
Mean output voltage: DC 3.6 V
Maximum charge voltage: DC 4.2 V
Maximum charge current: 1.4 A
Capacity:
Audio codec type: AAC LC
Recording media: Internal Memory (approx.
12 MB), “Memory Stick PRO Duo” media
typical: 3.4Wh (970mAh)
minimum: 3.3Wh (930mAh)
[Input and Output connectors]
USB jack: mini B, Hi-Speed USB (USB 2.0
compliant)
Design and specifications are subject to change
without notice.
A/V OUT jack: Minijack, Video out, audio out
(mono)
[LCD screen]
LCD panel: 4.6 cm (1.8 type) TFT drive
Total number of dots: 230 400 (960 × 240) dots
[Power, general]
Power: Rechargeable battery pack NP-BK1, 3.6 V
AC-LS5K AC Adaptor (sold separately),
4.2 V
Power consumption: 2.0 W (when the movie
image size is [720 30P])
Operating temperature: 0 to 40°C (32 to 104°F)
Storage temperature: –20 to +60°C (–4 to +140°F)
Dimensions: Approx. 23.5 × 103.3 × 55.3
(15/16 × 4 1/8 × 2 1/4 inches)
(W/H/D, excluding protrusions)
Mass: Approx. 120 g (4.2 oz) (including NP-BK1
battery pack, etc.)
Microphone: Monaural
37
Trademarks
• “Memory Stick”,
, “Memory Stick PRO”,
, “Memory Stick Duo”,
, “Memory Stick PRO
, “Memory
Duo”,
Stick Micro”, “MagicGate”, and
are trademarks of Sony
Corporation.
• Microsoft, Windows, Windows Vista and
DirectX are either registered trademarks or
trademarks of Microsoft Corporation in the
United States and/or other countries.
• Macintosh, Mac OS, iMac, iBook, PowerBook,
Power Mac and eMac are trademarks or
registered trademarks of Apple Inc.
• Intel, MMX, and Pentium are trademarks or
registered trademarks of Intel Corporation.
In addition, system and product names used in this
manual are, in general, trademarks or registered
trademarks of their respective developers or
manufacturers. However, the ™ or ® marks are
not used in all cases in this manual.
38
Additional information on this product and answers
to frequently asked questions can be found at our
Customer Support Website.
Printed on 70% or more recycled paper using VOC
(Volatile Organic Compound)-free vegetable oil based
ink.
Printed in China
|