This user manual includes detailed usage
instructions for your camera. Please read
this manual thoroughly.
Ä Click a topic
User Manual
CL80
Health and safety information
tꢀDo not insert foreign objects into any of your camera’s
compartments, slots, or access points. Damage due to
improper use may not be covered by your warranty.
Safety precautions
Handle and store your camera carefully and sensibly
tꢀDo not swing your camera by the strap. This may cause injury
to yourself or others.
tꢀDo not allow your camera to get wet—liquids can cause serious
damage. Do not handle your camera with wet hands. Water
damage to your camera can void your manufacturer’s warranty.
tꢀDo not paint your camera, as paint can clog moving parts and
prevent proper operation.
tꢀDo not expose the camera to direct sunlight or high
temperatures for an extended period of time. Prolonged
exposure to sunlight or extreme temperatures can cause
permanent damage to your camera’s internal components.
tꢀPaint or metal on the outside of the camera may cause
allergies, itchy skin, eczema, or swelling for people with
sensitive skin. If you have experience any of these symptoms,
stop using the camera immediately and consult a doctor.
tꢀAvoid using or storing your camera in dusty, dirty, humid, or
poorly-ventilated areas to prevent damage to moving parts and
internal components.
Protect batteries, chargers, and memory cards from
damage
tꢀRemove the batteries from your camera when storing it for an
extended period of time. Installed batteries may leak or corrode
over time and cause serious damage to your camera.
tꢀAvoid exposing batteries or memory cards to very cold or very
hot temperatures (below 0º C/32º F or above 40º C/104º F).
Extreme temperatures can reduce the charging capacity of your
batteries and can cause memory cards to malfunction.
tꢀProtect your camera from sand and dirt when using it on
beaches or in other similar areas.
tꢀPrevent batteries from making contact with metal objects, as
this can create a connection between the + and – terminals
of your battery and lead to temporary or permanent battery
damage. Also, this may cause a fire or electric shock.
tꢀProtect your camera and monitor from impact, rough handling,
and excessive vibration to avoid serious damage.
tꢀExercise caution when connecting cables or adapters and
installing batteries and memory cards. Forcing the connectors,
improperly connecting cables, or improperly installing batteries
and memory cards can damage ports, connectors, and
accessories.
tꢀPrevent memory cards from making contact with liquids, dirt, or
foreign substances. If dirty, wipe the memory card clean with a
soft cloth before inserting in your camera.
tꢀDo not allow liquids, dirt, or foreign substances to come in
contact with the memory card slot. Doing so may cause the
camera to malfunction.
2
Health and safety information
tꢀTurn off the camera when inserting or removing the memory
card.
Turn off the camera near medical equipment
Your camera can interfere with medical equipment in hospitals or
health care facilities. Follow all regulations, posted warnings, and
directions from medical personnel.
tꢀDo not bend, drop, or subject memory cards to heavy impact
or pressure.
tꢀDo not use memory cards that have been formatted by other
cameras or by a computer. Reformat the memory card with
your camera.
Turn off the camera when in an aircraft
tꢀNever use a damaged charger, battery, or memory card.
Your camera can cause interference with aircraft equipment.
Follow all airline regulations and turn off your camera when
directed by airline personnel.
Use only Samsung-approved accessories
Using incompatible accessories may damage your camera,
cause injury, or void your warranty.
Avoid interference with other electronic devices
Your camera emits radio frequency (RF) signals that may interfere
with unshielded or improperly shielded electronic equipment,
such as pacemakers, hearing aids, medical devices, and
other electronic devices in homes or vehicles. Consult the
manufacturers of your electronic devices to solve any interference
problems you experience.
Protect your camera’s lens
tꢀDo not expose the lens to direct sunlight, as this may discolor
the image sensor or cause it to malfunction.
tꢀProtect your lens from fingerprints and scratches. Clean your
lens with a soft, clean, debris-free lens cloth.
Follow all safety warnings and regulations
Comply with any regulations that restrict the use of a camera in a
certain area.
3
Health and safety information
Important usage information
Check that the camera is operating properly before use
The manufacturer takes no responsibility for any loss of files or
damage that may result from camera malfunction or improper
use.
Allow only qualified personnel to service your camera
Do not allow unqualified personnel to service the camera or
attempt to service the camera yourself. Any damage that results
from unqualified service is not covered by your warranty.
Use your camera in the normal position
Avoid contact with your camera’s internal antenna.
Ensure maximum battery and charger life
tꢀOvercharging batteries may shorten battery life. After charging is
finished, disconnect the cable from your camera.
tꢀOver time, unused batteries will discharge and must be
recharged before use.
tꢀDisconnect chargers from power sources when not in use.
tꢀUse batteries only for their intended purpose.
Exercise caution when using the camera in humid
environments
tꢀData transferred via WLAN or Bluetooth technology could be
leaked, so avoid transferring sensitive data in public areas or
on open networks.
When transferring the camera from a cold environment to a warm
and humid one, condensation can form on the delicate electronic
circuitry and memory card. In this situation, wait for at least 1 hour
until all moisture has evaporated before using the camera.
tꢀThe camera manufacturer is not liable for any data transfers
that infringe on copyrights, trademarks, intellectual property
laws, or public decency ordnances.
4
Organization of the user manual
Copyright information
• Microsoft Windows and the Windows logo are
registered trademarks of the Microsoft Corporation.
• Mac is a registered trademark of the Apple Corporation.
• HDMI, the HDMI logo and the term “High Definition
Multimedia Interface” are trademarks or registered
trademarks of HDMI Licensing LLC.
• Bluetooth® and the Bluetooth logo are registered
trademarks of the Bluetooth SIG, Inc. and are used by
Samsung Electronics Co., Ltd. under license. All other
trademarks and product names are owned by their
respective owners.
• Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are
registered trademarks of the Wi-Fi Alliance.
• Camera specifications or contents of this manual may
be changed without prior notice due to upgrade of
camera functions.
• We recommend using your camera within a country
where you purchase it.
• For Open Source License information, refer to the
“OpenSourceInfo.pdf” in the provided CD-ROM.
5
Indications used in this manual
Icons used in this manual
Shooting mode
Smart Auto
Auto
Indication
Icon
Function
S
Additional information
a
Safety warnings and precautions
Program
p
Camera buttons; for example: [Shutter]
(represents the shutter button)
[
(
]
)
Scene
s
DUAL IS
d
Page number of related information
Smart Scene Detection
Movie
D
The order of options or menus you must select to perform
“
a step; for example: Select
>
“
v
(represents Select
>
, and then
)
*
Annotation
Shooting mode icons
These icons indicate that a function is available in the
corresponding modes. The smode may not support functions
for all scenes.
Abbreviations used in this manual
Abbreviation
ACB
AEB
Definition
e.g.)
Auto Contrast Balance
Auto Exposure Bracket
Auto Focus
Available in the
Program, DUAL IS,
Movie, and Smart
Scene Detection
modes
AF
AP
Access Point
DIS
Digital Image Stabilization
Digital Living Network Alliance
Digital Print Order Format
Exposure Value
DLNA
DPOF
EV
OIS
Optical Image Stabilization
White Balance
WB
6
Expressions used in this manual
Pressing the shutter
Exposure (Brightness)
tꢀHalf-press [Shutter]: press the shutter halfway down
tꢀPress [Shutter]: press the shutter all the way down
The amount of light that enters your camera determines the
exposure. You can alter the exposure with shutter speed,
aperture value, and ISO speed. By altering the exposure, your
photos will be darker or lighter.
Half-press [Shutter]
Press [Shutter]
Normal exposure
Overexposure (too bright)
Subject, background, and composition
tꢀSubject: the main object of a scene, such as a person, animal,
or still life
tꢀBackground: the objects around the subject
tꢀComposition: the combination of a subject and background
Background
Composition
Subject
7
Common questions
You can get answers to common questions. Solve problems easily by setting shooting options.
The subject's eyes
appear red.
This is caused by a reflection from the camera flash.
tꢀ Set the flash option to
Red-eye or
Red-eye Fix. (p. 47)
tꢀ If the photo has already been taken, select
Red-eye Fix in the edit menu. (p. 82)
Photos have dust spots.
Photos are blurred.
Dust particles floating in the air may be captured in photos when using the flash.
tꢀ Turn off the flash or avoid taking photos in a dusty place.
This may be caused by taking photos in low light conditions or holding the camera incorrectly.
tꢀ Use the
d
Photos are blurred when
shooting at night.
As the camera tries to let in more light, the shutter speed slows.
This can make it difficult to steady the camera and may result in camera shake.
tꢀ Select
Night in the
s
tꢀ Use a tripod to prevent your camera from shaking.
Subjects come out
too dark because of
backlighting.
When the light source is behind the subject or when there is a high contrast between the light and dark
areas, the subject may come out shaded.
tꢀ Avoid shooting in front of the sun.
tꢀ Select
Backlight in the
s
tꢀ Set the metering option to
8
Quick reference
Taking photos of people
Adjusting the exposure (brightness)
tꢀ Viewing files by category in
f
tꢀ
tꢀ Red-eye, Red-eye Fix (to prevent or correct red-eye)
s
mode > Beauty Shot, Portrait, Children
tꢀ ISO speed (to adjust the sensitivity to light)
f
f
tꢀ Deleting all files on the
tꢀ EV (to adjust exposure)
f
f
f
tꢀ ACB (to compensate for subjects against bright
backgrounds) 58
tꢀ Viewing files as a slide show
tꢀ Face Detection
f
f
f
tꢀ Metering
tꢀ Viewing files on a TV or HDTV
f
f
tꢀ AEB (to take 3 photos of the same scene with different
exposures) 62
Taking photos at night or in the dark
tꢀ Connecting your camera to a
computer 86
f
f
tꢀ Adjusting sound and volume
tꢀ
s
mode > Night, Dawn, Fireworks
f
Applying a different effect
f
tꢀ Flash options
f
tꢀ Adjusting the brightness of
tꢀ ISO speed (to adjust the sensitivity to light)
f
f
tꢀ Photo styles (to apply tones)
f
tꢀ Changing the display
language 114
tꢀ Smart filter effects
f
f
Taking action photos
tꢀ Image adjustment (to adjust saturation, sharpness, or
contrast) 65
tꢀ Setting the date and time
f
f
tꢀ Continuous, Motion Capture
f
tꢀ Formatting the memory card
f
Reducing camera shake
tꢀ Troubleshooting
f
Taking photos of text, insects, or
flowers
tꢀ Optical Image Stabilization (OIS)
f
tꢀ
d
mode
f
tꢀ
s
mode > Close Up, Text
f
tꢀ Macro, Auto Macro (to take close-up photos)
f
tꢀ White Balance (to change the color tone)
f
9
Contents
11
Contents
12
Unpacking
Check your product box for the following items.
Camera
AC adapter/USB cable
(AD44-00143A)/(AD39-00165A)
Rechargeable battery
Strap
(Sliver: AD63-02596A/
Black: AD63-02604A)
User Manual CD-ROM
(AD46-00309A)
(4302-001226)
The illustrations may differ from your
actual items.
Quick Start Manual
(AD68-04779A)
Cradle
(AD97-18838A)
Touch pen
(AD75-00070A)
Optional accessories
Camera case
Memory card
A/V cable
(AD39-00146A)
Battery charger
HDMI cable
(AD39-00179A)
(microSDTM
)
(
AD44-00164A
)
Basic functions 14
Camera layout
Before you start, familiarize yourself with your camera's parts and their functions.
POWER button
Microphone
Shutter button
Flash
Lens
AF-assist light/timer lamp
Internal antenna*
* Avoid contact with the internal
antenna while using the
wireless network.
Tripod mount
Speaker
Battery chamber cover
Insert a memory card and battery
Basic functions 15
Camera layout
Status lamp
tꢀBlinking: When saving a photo or video, being read by a
computer or printer, out of focus, connecting to a WLAN,
sending a photo, or turning on the Bluetooth feature
tꢀSteady: When connecting to a computer or in focus
Playback button
Zoom button
tꢀZoom in or out
tꢀZoom in on part of a photo or view files
as thumbnails
HDMI port
Accepts HDMI cable
USB and A/V port
Accepts USB cable or A/V cable
1
2
Touch screen
Basic functions 16
Inserting the battery and memory card
Learn to insert the battery and an optional microSDTM memory card into the camera.
Removing the battery and memory card
Push gently until the card
disengages from the
camera and then pull it out
of the slot.
Memory card
Insert a memory card with
the gold-colored contacts
Battery
lock
Push the lock up to release
the battery.
facing up.
Battery
Insert the battery with the
Samsung logo facing down.
The internal memory can be used as a temporary storage device when the
memory card is not inserted.
Basic functions 17
Charging the battery and turning your camera on
Charging the battery
Before using the camera for the first time, you must charge the
battery. Attach the USB cable to the AC adapter and then plug
the end of cable with the indicator light into your camera.
Turning on your camera
Press [POWER] to turn your camera on or off.
tꢀThe initial setup screen appears when you turn on the camera
for the first time. (p. 19)
Turning on your camera in Playback mode
Press [Playback]. The camera turns on and accesses Playback
mode immediately.
Indicator light
tꢀRed: Charging
tꢀGreen: Fully charged
When you turn on your camera by pressing and holding [Playback] for about
5 seconds, the camera does not emit any camera sounds.
Basic functions 18
Performing the initial setup
The initial setup screen appears to allow you to configure the camera's basic settings.
Select a time zone and select
tꢀ To set the daylight-saving time, select
.
4
Select Language.
1
.
Select a language.
Select Date & Time (Date & Time).
2
3
5
6
Select Time Zone (Time Zone).
Set the date and time, select a date format, and select
.
Basic functions 19
Learning icons
The icons displayed will change according to the mode you select or the options you set.
Icon
Description
Icon
Description
A
Photo styles
tꢀ
: Motion recognition
Smart filter effect
tꢀ N: Network and Bluetooth menus
tꢀ M: Shooting options and
settings menu
Image setting options
tꢀ : Exposure value
l
Available number of photos
Available recording time
Internal memory
Memory card inserted
tꢀ
tꢀ
tꢀ
tꢀ
tꢀ
tꢀ
tꢀ
tꢀ
tꢀ
tꢀ
: White balance
B
tꢀ
tꢀ
tꢀ
: Fully charged
: Partially charged
: Charging needed
: ISO speed
: Face tone
: Face retouch
A. Status icons
: Focus area option
: Face detection option
: Smart face recognition edit option
: Photo resolution
: Video resolution
: Photo quality
Zoom ratio
Icon
Description
Shooting mode
p
Voice memo
Aperture and shutter speed
Auto focus frame
Camera shake
Option set 1 (of 4)
Photo resolution
Video resolution
f
tꢀ : Frame rate
Metering
tꢀ
tꢀ
tꢀ
tꢀ
tꢀ
tꢀ
: Exposure with ACB
Current date and time
Grid lines
Optical Image Stabilization (OIS)
: Metering option
: Burst type
Frame rate
: Photo styles
Exposure value
ISO speed
B. Option icons (touch)
: Smart filter effect
Icon
Description
Flash option
: Image adjustment (sharpness,
contrast, saturation)
White balance
Face detection
Burst mode
tꢀ
tꢀ
tꢀ
: Long time shutter
Auto focus option
: Optical Image Stabilization (OIS)
: Audio recording
Image adjustment (sharpness,
contrast, saturation)
Timer option
Display type
tꢀ <>: Another row of options
Basic functions 21
Using the touch screen
Learn basic actions to use the touch screen. Use the supplied touch pen to touch or drag on the screen.
Touching
Do not use other sharp objects, such as pens or pencils, to touch the screen.
Doing so may damage the screen.
Touch an icon to select a menu or option.
tꢀ When you touch or drag on the screen, discolorations will occur. It is
not a malfunction but a characteristic of the touch screen. Touch or
drag lightly to reduce these annoying effects.
tꢀ The touch screen may not recognize your touches correctly when:
-
-
-
you touch multiple items at the same time
you use the camera in high humidity environments
you use the camera with an LCD protection film or another LCD
accessory
tꢀ If you touch the screen with your finger, the screen may not recognise
your input.
tꢀ If you perform no operations for few seconds, the screen will dim to
save battery life.
Dragging
Drag left or right to scroll horizontally.
EV
-2
-1
0
+1
+2
Basic functions 22
Selecting a shooting mode
Learn how to select a shooting mode. Your camera provides you with various modes for shooting.
Select the mode icon.
1
Mode
Description
Smart Auto: Take a photo by letting the camera select
a scene mode as it detects. (p. 33)
S
Auto: Take a photo quickly and easily with minimal
settings. (p. 27)
a
p
s
Program: Take a photo by setting options. (p. 38)
Scene: Take a photo with options preset for a specific
scene. (p. 34)
DUAL IS: Take a photo with options suitable for
reducing camera shake. (p. 37)
d
Select a mode.
2
Smart Scene Detection: Record a video by letting
the camera select a scene mode as it detects. (p. 40)
D
v
Movie: Record a video. (p. 38)
Basic functions 24
Selecting a shooting mode
Selecting a shooting mode using motion
recognition
Your camera features a built-in motion sensor that allows you to
quickly switch the shooting mode by tilting the camera.
In Shooting mode, tilt the camera while touching and
holding
.
Access the Movie mode (p. 38)
Access the Smart Auto mode (p. 33)
Motion recognition may not work well if you hold the camera parallel to the
ground, as shown below.
Access the Program mode (p. 38)
Basic functions 25
Setting the touch screen and sound
Learn how to change the basic settings for the touch screen and sound according to your preferences.
Setting the display type for the touch screen
Setting the sound
Set whether your camera emits a specified sound when you
operate your camera.
In Shooting mode, select
(In Playback mode, select
.
1
.)
In Shooting or Playback mode, select
M.
1
2
3
Select an option.
2
Select
“ Beep Sound.
Select an option.
Full
Option
Off
Description
The camera does not emit any sounds.
The camera emits sounds.
On
Select
to return to the previous mode.
4
Option
Description
Full: Display the name of an option when you select
an icon.
Basic: Display icons without the name of an option.
This option is available only in Playback mode.
Hide: Hide icons on the screen if you perform no
operations for 3 seconds (touch the screen to display
icons again).
Guide Line: Display grid lines. The grid lines are
helpful for getting the photo aligned with a surface,
such as the horizon or the edges of buildings. This
option is available only in Shooting mode.
Basic functions 26
Taking photos
Learn basic actions to take photos easily and quickly in the Auto mode.
Make sure that the camera is in the
camera’s default shooting mode.
a
mode (Auto), the
Half-press [Shutter] to focus.
tꢀ A green frame means the subject in focus.
1
3
4
tꢀ If not, select the mode icon “
a.
Press [Shutter] to take a photo.
Align your subject in the frame.
2
See page 30 for tips to get clearer photos.
Basic functions 27
Taking photos
Digital zoom
Zooming
If the zoom indicator is in the digital range, your camera is using
the digital zoom. The picture quality may deteriorate when you
use the digital zoom.
You can shoot close-up photos by adjusting the zoom. Your
camera has a 7X optical zoom and 5X digital zoom. By using
both, you can zoom in up to 35 times.
Rotate [Zoom] right to zoom in on your subject. Rotate [Zoom]
left to zoom out.
Zoom indicator
Digital range
Zoom ratio
Optical range
Zoom out
Zoom in
tꢀ The digital zoom is not available when using
scenes), , and modes and when used with Face Detection,
and Smart Filter.
tꢀ It may take longer to save a photo when using the digital zoom.
S
,
d
,
s
(in some
v
D
The zoom ratio available for videos differs.
Basic functions 28
Taking photos
apsvD
Reducing camera shake (OIS)
tꢀ OIS may not function properly when:
Reduce camera shake optically in Shooting mode.
-
-
-
-
you move your camera to follow a moving subject
you use digital zoom
there is too much camera shake
the shutter speed is slow (e.g., when you select Night in the
mode)
s
-
-
the battery is low
you take a close-up shot
tꢀ If you use the OIS function with a tripod, your images may be blurred
by the vibration of the OIS sensor. Deactivate the OIS function when
you use a tripod.
Before correction
After correction
tꢀ If the camera is impacted, the display will be blurry. In this case, turn
off the camera and turn it on again to use the OIS function correctly.
tꢀ In some scene modes, the OIS function is unavailable.
In Shooting mode, select
Select an option.
f
“
>
(once or twice) “
.
1
2
Option
Description
Off: Deactivate the OIS function.
On: Activate the OIS function.
Basic functions 29
Tips for getting a clearer photo
Holding your camera correctly
Reducing camera shake
tꢀ Set the Optical Image Stabilization option to
reduce camera shake optically. (p. 29)
tꢀ Select the mode to reduce camera shake
both optically and digitally. (p. 37)
Make sure nothing is
blocking the lens.
d
When
h
is displayed
Half-pressing the shutter button
Half-press [Shutter] and adjust the
focus. Focus and exposure will be
adjusted automatically.
Camera shake
When shooting in the dark, avoid setting the flash option to Slow
Sync or Off. The aperture remains open longer and it may be harder
to hold the camera still.
The aperture value and shutter
speed are automatically set.
tꢀ Use a tripod or set the flash option to Fill in. (p. 47)
Focus frame
tꢀ Set ISO speed options. (p. 48)
tꢀPress [Shutter] to take the
photo if displayed in green.
tꢀChange the frame and
half-press [Shutter] again if
displayed in red.
Basic functions 30
Preventing your subject from being out of focus
tꢀ When you take photos in low light
It may be difficult to get your subject in focus when:
- there is little contrast between the subject and background
(When your subject is wearing a color of clothing that is similar to the
background)
Turn on the flash.
(p. 47)
- the light source behind the subject is too bright
- the subject is shiny
- the subject includes horizontal patterns, such as blinds
- the subject is not positioned in the center of the frame
tꢀ When subjects are moving fast
Use the continuous
or motion capture
function. (p. 62)
Use the focus lock
Half-press [Shutter] to focus. When the subject is in focus,
you can reposition the frame to change the composition.
When you are ready, press [Shutter] to take your photo.
Basic functions 31
Shooting modes
Take photos or record videos by selecting the best shooting mode for the conditions.
Using the Smart Auto mode
Icon
Description
In this mode, your camera automatically chooses the appropriate
camera settings based on a detected type of scene. It will be
helpful if you are not familiar with the camera settings for various
scenes.
Appears when taking portraits at night.
Appears when taking photos of landscapes with
backlighting.
Appears when taking portraits with backlighting.
Appears when taking portraits.
In Shooting mode, select
a
“
S.
1
2
Align your subject in the frame.
tꢀ The camera selects a scene automatically. An appropriate
Appears when taking close-up photos of objects.
Appears when taking close-up photos of text.
Appears when taking photos of sunsets.
Appears when taking photos of clear skies.
Appears when taking photos of forested areas.
mode icon will appear at the top left of the screen.
Appears when taking close-up photos of colorful
subjects.
Appears when taking close-up portraits of people.
Appears when the camera and subject are stable for
a while. This is available only when you are shooting
in the dark.
Icon
Description
Appears when taking photos of actively moving
subjects.
Appears when taking photos of landscapes.
Appears when taking photos of bright white
backgrounds.
Appears when taking photos of fireworks. This is
available only when you use a tripod.
Appears when taking photos of landscapes at night.
This is available only when the flash is off.
Extended functions 33
Shooting modes
Half-press [Shutter] to focus.
3
4
Using the Scene mode
Take a photo with options preset for a specific scene.
Press [Shutter] to take the photo.
In Shooting mode, select
Select a scene.
a
“
s.
1
2
tꢀ If the camera does not recognize a proper scene mode,
change and the default settings will be used.
S
will not
tꢀ Even if there is a face detected, the camera may not select a portrait
mode depending on the subject's position or lighting.
tꢀ The camera may not select the correct scene depending on shooting
environments, such as camera shake, lighting and distance to the
subject.
This mode allows you to choose an appropriate scene for
a variety of situations.
Scene
tꢀ Even if you use a tripod, the
mode may not be detected depending
on the subject's movement.
tꢀ For the Beauty Shot mode, see “Using the Beauty Shot
mode” on page 35.
tꢀ For the Frame Guide mode, see “Using the frame guide” on
page 36.
tꢀ For the Night mode, see “Adjusting the exposure in the Night
mode” on page 36.
Align your subject in the frame and half-press [Shutter]
to focus.
3
4
Press [Shutter] to take the photo.
Extended functions 34
Shooting modes
To hide facial imperfections, select
option.
f
“
“ an
Using the Beauty Shot mode
Take a photo of a person with options to hide facial imperfections.
3
tꢀ Select a higher setting to hide a greater number of
imperfections.
In Shooting mode, select
a
“
s
“
.
1
2
To make the subject's skin tone appear lighter (face
only), select “ an option.
tꢀ Select a higher setting to make skin tone appear lighter.
f
“
Level 3
Level 2
Align your subject in the frame and half-press [Shutter]
to focus.
4
5
Press [Shutter] to take the photo.
The focus distance will be set to Auto Macro.
Extended functions 35
Shooting modes
Using the frame guide
Adjusting the exposure in the Night mode
When you want another person to take a photo of you, you can
compose the scene with the frame guide feature. The frame
guide will help the other person take a photo of you by showing
the part of the pre-composed scene.
In the Night mode, you can catch brief flashes of light as curved
streaks by extending the exposure. Use a slow shutter speed
to extend the time until the shutter closes. Increase the aperture
value to prevent overexposure.
In Shooting mode, select
a
“
s
“
.
In Shooting mode, select
a
“
s
“
.
1
2
1
2
Align your subject in the frame and press [Shutter].
tꢀ Transparent guides will appear on the left and right of the
frame.
Select
f
“
“ Aperture.
Aperture
Shutter
Speed
Cancel Frame: Back
Select an option.
3
Ask another person to take a photo.
tꢀ The person must align the subject in the frame by using the
guides, and then press [Shutter] to take the photo.
3
4
To cancel the guides, select
.
Extended functions 36
Shooting modes
Select
f
“
“ Shutter Speed.
Using the DUAL IS mode
Reduce camera shake and prevent blurred photos with Optical
and Digital Image Stabilization functions.
4
Aperture
Shutter
Speed
1.0
2.0
4.0
8.0 16.0
Before correction
After correction
Select a value to adjust the shutter speed and select
.
5
6
In Shooting mode, select d.
a
“
1
2
Align your subject in the frame and half-press [Shutter]
to focus.
Align your subject in the frame and half-press [Shutter]
to focus.
Press [Shutter] to take the photo.
7
Press [Shutter] to take the photo.
3
Use a tripod to prevent your photos from blurring.
tꢀ The digital zoom will not work in this mode.
tꢀ The camera will correct photos optically only when you take them with
a light source that is brighter than fluorescent light.
tꢀ If your subject is moving rapidly, the photo may be blurry.
tꢀ Set the Optical Image Stabilization option to reduce camera shake in
different shooting modes. (p. 29)
Extended functions 37
Shooting modes
Using the Program mode
Set various options (except for shutter speed and aperture value)
in the Program mode.
Recording a video
Record videos of up to 20 minutes in length in high definition. The
recorded video is saved as an H.264 (MPEG-4.AVC) file.
In Shooting mode, select
a
“
p.
1
2
tꢀ H.264 (MPEG-4 part10/AVC) is a high-compression video format
established by international standard organizations ISO/IEC and ITU-T.
Set options. (For a list of options, refer to “Shooting
options.”)
tꢀ When the Optical Image Stabilization (
) is activated, your video may
be recorded with the OIS operation sound.
tꢀ The zoom sound may be recorded if you use the zoom while
recording a video.
In Shooting mode, select
a
“
v.
1
2
Select
f
“
“ a frame rate (the number of frames
per second).
tꢀ As the number of frames increases, action appears more
natural, but the file size is increased.
Align your subject in the frame and half-press [Shutter]
to focus.
3
4
30 FPS
Press [Shutter] to take the photo.
is available only when the video resolution is 320 X 240.
Extended functions 38
Shooting modes
To pause recording
Select
>
“
“ a sound option.
3
The camera allows you to pause temporarily while recording a
video. With this function, you can record your favorite scenes as
a single video.
Option
Description
Off: Record a video without sound.
Select to pause while recording. Select to resume.
On: Record a video with sound.
Zoom Mute: Record a video without sound while
zooming.
Set other options as desired. (For options, refer to
“Shooting options.”)
4
Stop: Shutter
Press [Shutter] to start recording.
5
6
Press [Shutter] again to stop recording.
Extended functions 39
Shooting modes
Press [Shutter] to start recording.
Using the Smart Scene Detection mode
In this mode, your camera automatically chooses the appropriate
camera settings based on a detected type of scene.
3
4
Press [Shutter] again to stop recording.
tꢀ If the camera does not recognize a proper scene mode,
change and the default settings will be used.
tꢀ The camera may not select the correct scene depending on shooting
environments, such as camera shake, lighting and distance to the
subject.
D
will not
In Shooting mode, select
a
“
D.
1
2
Align your subject in the frame.
tꢀ The camera selects a scene automatically. An appropriate
mode icon will appear at the top left of the screen.
Icon
Description
Appears when recording videos of landscapes.
Appears when recording videos of clear skies.
Appears when recording videos of forested areas.
Appears when recording videos of sunsets.
Extended functions 40
apsd
Recording voice memos
Learn how to record a voice memo that you can play back at any time. You can add a voice memo to a photo as a short reminder of
shooting conditions.
You will get the best sound quality when recording 40 cm away from the camera.
Recording a voice memo
Adding a voice memo to a photo
In Shooting mode, select
f
“
“
. (In some
.)
In Shooting mode, select
f
“
“
. (In some
.)
1
1
modes, select
f
“
>
(repeatedly) “
“
modes, select
f
“
>
(repeatedly) “
“
Record
Memo
Press [Shutter] to record.
tꢀ Select to pause and to resume.
tꢀ The available recording time will be displayed on the top of
the screen.
tꢀ You can record voice memos of up to 10 hours in length.
Align your subject in the frame and take a photo.
tꢀ You will begin recording a voice memo right after taking the
photo.
2
2
3
Record a short voice memo (10 seconds maximum).
tꢀ Press [Shutter] to stop recording a voice memo.
Press [Shutter] to stop.
3
4
Select
to switch to Shooting mode.
Extended functions 41
Selecting a resolution and quality
Learn how to change the image resolution and quality settings.
SapsdvD
Selecting a resolution
Option
Description
As you increase the resolution, your photo or video will include
more pixels, so it can be printed on larger paper or displayed on
a larger screen. When you use a high resolution, the file size will
also increase.
4320 X 3240: Print on A1 paper.
4000 X 3000: Print on A1 paper.
3984 X 2656: Print on A2 paper in wide ratio (3:2).
3840 X 2160: Print on A2 paper in panorama ratio
(16:9) or play back on an HDTV.
When taking a photo:
3264 X 2448: Print on A3 paper.
2560 X 1920: Print on A4 paper.
2048 X 1536: Print on A5 paper.
In Shooting mode, select
f
“
“
>
.)
“
.
1
2
(In some modes, select
f
Select an option.
1920 X 1080: Print on A5 paper in panorama ratio
(16:9) or play back on an HDTV.
1024 X 768: Attach to an email.
3840 X 2160
Shooting options 43
Selecting a resolution and quality
When recording a video:
apsd
Selecting image quality
Photos you take are compressed and saved in JPEG format.
Higher quality images will result in larger sizes.
In the
v
and
D
modes, select
f
“
.
1
2
Select an option.
In Shooting mode, select
f
“
>
“
.
1
2
(In some modes, select
f
“
.)
Select an option.
1280 X 720 HQ
Fine
Option
Description
1280 X 720 HQ: Play back high-quality files on an
HDTV.
1280 X 720: Play back on an HDTV.
640 X 480: Play back on a general TV.
320 X 240: Post on a web page.
Option
Description
Super Fine
Fine
For Sharing: Post on a website using the wireless
Normal
network (30 seconds maximum).
Shooting options 44
SapsdvD
Using the timer
Learn how to set the timer to delay shooting.
Press [Shutter] to start the timer.
tꢀ The AF-assist light/timer lamp blinks. The camera will
automatically take a photo at the specified time.
In Shooting mode, select
Select an option.
.
3
1
2
tꢀ Select the timer icon or press [Shutter] to cancel the timer.
tꢀ Depending on the selected face defection option, the timer is not
available or some timer options are not available.
Off
Option
Description
Off: The timer is not active.
10 Sec: Take a photo in 10 seconds.
2 Sec: Take a photo in 2 seconds.
Double: Take a photo in 10 seconds and take another
in 2 seconds.
Motion Timer: Detect your movement and then take
a photo. (p. 46)
The options may differ depending on the shooting mode.
Shooting options 45
Using the timer
Using the motion timer
Pose for your photo while the AF-assist light/timer lamp
is blinking.
tꢀ The AF-assist light/timer lamp will stop blinking just before the
camera automatically takes a photo.
5
In Shooting mode, select
“
.
1
Press [Shutter].
2
Stand within 3 m from the camera within 6 seconds after
pressing [Shutter].
3
Make a motion, such as waving your arms, to activate
the timer.
4
tꢀ The AF-assist light/timer lamp will start to blink rapidly when
the camera detects you.
The motion timer may not work when:
tꢀ you are more than 3 m away from the camera
tꢀ your movements are too subtle
tꢀ there is too much light or backlight
The detection range of
the motion timer
Shooting options 46
Shooting in the dark
Learn how to take photos at night or in low light conditions.
Saps
aps
Preventing red-eye
Using the flash
If the flash fires when you take a photo of a person in the dark, a
red glow may appear in the eyes. To prevent this, select Red-eye
or Red-eye Fix. Refer to flash options in “Using the flash.”
Use the flash when taking photos in the dark or when you need
more light on your photos.
In Shooting mode, select
Select an option.
.
1
2
Auto
Option
Description
Off:
tꢀ The flash will not fire.
tꢀ Camera shake warning ( ) will be displayed when
shooting in low light.
Auto: The camera will select a proper flash setting for
the detected scene in the
S
mode.
Auto: The flash fires automatically when the subject or
background is dark.
Shooting options 47
Shooting in the dark
p
Option
Description
Adjusting the ISO speed
The ISO speed is the measure of a film’s sensitivity to light as
defined by the International Organization for Standardization (ISO).
The higher ISO speed you select, the more sensitive to light your
camera becomes. With a higher ISO speed, you can get a better
photo without using the flash.
Red-eye*:
tꢀ The flash fires when the subject or background is
dark.
tꢀ The camera reduces red-eyes.
Fill in:
tꢀ The flash always fires.
In Shooting mode, select
Select an option.
f
“
.
1
2
tꢀ Light intensity is adjusted automatically.
Slow Sync:
tꢀ Select
to use an appropriate ISO speed based on the
tꢀ The flash fires and the shutter stays open longer.
brightness of the subject and lighting.
tꢀ Select this when you want to capture ambient light
to reveal more details in the background.
tꢀ Use a tripod to prevent your photos from blurring.
Red-eye Fix*:
Auto
tꢀ The flash fires when the subject or background is
dark.
tꢀ The camera corrects red-eyes through its advanced
software analysis.
The options may differ depending on the shooting mode.
* There is an interval between two bursts of the flash. Do not move until
the flash fires a second time.
The higher ISO speed you select, the more image noise you may get.
tꢀ Flash options are not available if you set burst options or select Blink
Detection or Self-Portrait.
tꢀ Make sure that your subjects are within the recommended distance
from the flash. (p. 126)
tꢀ If there is reflected light or much dust in the air, tiny spots may appear
on your photo.
Shooting options 48
Changing the camera’s focus
Learn how to adjust the camera's focus according to your subjects.
apdvD
apdvD
Using macro
Using auto focus
Use macro to take close-up photos of subjects, such as flowers
or insects. Refer to macro options in “Using auto focus.”
To take sharp photos, select the appropriate focus according to
your distance from the subject.
In Shooting mode, select
Select an option.
.
1
2
Normal (AF)
Option
Description
Normal (AF): Focus on a subject farther than 80 cm
(farther than 150 cm when using zoom).
tꢀ Try to hold the camera very still to prevent blurry photos.
tꢀ Turn off the flash if the distance to the subject is less than 40 cm.
Auto Macro: Focus on a subject farther than 5 cm
(farther than 70 cm when using zoom).
Macro: Focus on a subject 5 - 80 cm (70 - 150 cm
when using zoom).
The options may differ depending on the shooting mode.
Shooting options 49
Changing the camera’s focus
apsd
Using smart touch focus
tꢀ If you do not touch any area on the screen, the focus frame will
appear in the center of the screen.
tꢀ Tracking a subject may fail when:
Smart Touch AF allows you to track and auto focus on your
subject, even when you are moving.
-
-
-
-
the subject is too small or the subject moves
the subject is backlit or you are shooting in a dark place
colors or patterns on the subject and the background are the same
the camera shakes excessively
In Shooting mode, select
f
“
“
.
1
2
Touch the subject you want to track in the touch area
In these cases, the focus frame will appear as a white single-line
frame.
(indicated by a frame).
tꢀ A focus frame will appear on the subject and will follow the
subject as you move the camera.
tꢀ If the camera fails to track the subject, you must reselect the subject
to track.
tꢀ If the camera fails to fix the focus, the focus frame will change to a red
single-line frame.
tꢀ If you use this function, you cannot set face detection, photo style
options, and smart filter effects.
tꢀ The white frame means that your camera is tracking the
subject.
tꢀ The green frame means that your subject is in focus when you
half-press [Shutter].
Shooting options 50
Changing the camera’s focus
apsd
apsd
Using one touch shooting
Adjusting the focus area
You can focus on your subject and take a photo with a touch of
your finger.
You can get clearer photos by selecting an appropriate focus
area according to your subject’s location in the scene.
In Shooting mode, select
Touch a subject to focus.
f
“
“
.
In Shooting mode, select
Select an option.
f
“
.
1
2
3
1
2
Touch and hold the subject to take the photo.
tꢀ Touch and hold until the level indicator fills up.
Center AF
Option
Description
Center AF: Focus on the center (suitable when
subjects are located in the center).
tꢀ When you use face detection, you should touch and hold the image
of detected face. If you touch and hold any other area, the frame to
detect faces will change to a normal frame.
tꢀ If you use this function, you cannot set burst options, photo style
options, and smart filter effects.
Multi AF: Focus on one or more of 9 possible areas.
One Touch Shooting: Focus on the subject by
touching the image on the screen. Touch and hold the
subject to take the photo.
Smart Touch AF: Focus on and track the subject that
you touch on the screen. (p. 50)
The options may differ depending on the shooting mode.
Shooting options 51
apsd
Using face detection
If you use face detection options, your camera can automatically detect a human face. When you focus on a human face, the camera
adjusts the exposure automatically. Take photos quickly and easily by using Blink Detection to detect closed eyes or Smile Shot to
capture a smiling face. You can also use Smart Face Recognition to register faces and prioritize the focus on them.
Detecting faces
tꢀ In some scene modes, face detection is unavailable.
tꢀ Face detection may not be effective when:
Your camera automatically detects human faces (up to 10 human
-
the subject is far from the camera (The focus frame will appear
orange for Smile Shot and Blink Detection)
it is too bright or too dark
faces).
-
-
-
-
-
the subject is not facing the camera
the subject is wearing sunglasses or a mask
the subject is in backlighting or the lighting condition is unstable
the subject’s facial expression changes remarkably
tꢀ Face detection is not available when using a photo style or a smart
filter effect.
tꢀ When you use the face detection option, the digital zoom will not
work.
tꢀ Depending on the selected face detection option, the timer is not
available or some timer options are not available.
tꢀ Depending on the selected face detection option, some burst options
are not available.
In Shooting mode, select f“
appears in a white focus frame and the rest of the faces appear in
“
. The nearest face
gray focus frames.
tꢀ When you take photos of detected faces, they will be registered in
the face list.
tꢀ You can view registered faces in order of priority in Playback mode.
(p. 69) Even though faces are registered successfully, they may not be
classified in Playback mode.
tꢀ The detected face in Shooting mode may not appear in the face list
or Smart Album.
tꢀ The closer you are to the subject, the quicker your camera will detect
faces.
tꢀ If you want to focus faces in gray focus frames, touch them to focus.
tꢀ When you use the burst option, the detected faces may not be
registered.
Shooting options 52
Using face detection
Taking a self portrait shot
Take photos of yourself. The focus distance will be set to close-
up and your camera will emit a beep.
Taking a smile shot
The camera automatically releases the shutter when it detects a
smiling face.
In Shooting mode, select f“
“
. When your subject
smiles broadly, your camera can detect the smile more easily.
In Shooting mode, select
f
“
“
.
1
2
When you hear a quick beep, press [Shutter].
To turn the beep on or off, select Self-Portrait in the sound settings. (p. 113)
Shooting options 53
Using face detection
Detecting eye blinking
If your camera detects closed eyes, it will automatically take 2
photos in succession.
Using smart face recognition
The camera automatically registers faces that you frequently
photograph. This feature will automatically prioritize the focus on
those faces and favorite faces. This feature is available only when
you use a memory card.
In Shooting mode, select f“
“
.
tꢀ Hold your camera still while “Capturing” is displayed on the screen.
tꢀ When blink detection fails, “Picture taken with eyes closed.”
message appears. Take another photo.
In Shooting mode, select f“
“
. The nearest face
appears in a white focus frame and the rest of the faces appear in
gray focus frames.
tꢀ
: Indicate favorite faces
(To register favorite faces, see page 55).
tꢀ : Indicate faces that the camera automatically registers.
Shooting options 54
Using face detection
Registering faces as your favorites (My Star)
You can register your favorite faces to prioritize the focus and
exposure on those faces. This feature is available only when you
use a memory card.
tꢀ The camera may recognize and register faces incorrectly depending
on lighting conditions, remarkable changes in the subject's pose or
face, and whether or not the subject is wearing glasses.
tꢀ The camera can automatically register up to 14 faces. If the camera
recognizes a new face when there are 14 registered faces, it will
replace the face in the lowest priority with the new one.
In Shooting mode, select
f
“
“
>
“
“
“
.
1
2
tꢀ The camera can detect up to 10 faces in one scene.
(In some modes, select
f
.)
Align your subject’s face with the oval guideline and
press [Shutter] to register the face.
tꢀ If the subject’s face is not aligned with the oval guideline, the
white frame will not appear.
tꢀ You can take photos of a subject’s face directly from the front,
to the left side, to the right side, from above, or from below.
tꢀ Take photos of one person at a time when registering faces.
Shooting options 55
Using face detection
Select
when the face list appears.
3
tꢀ Your favorite faces are indicated with a
on the face list.
tꢀ You can register up to 6 favorite faces.
tꢀ The flash option will be set to Off.
tꢀ If you register the same face twice, you can delete one of the faces
in the face list.
Viewing your favorite faces
In Shooting mode, select
(In some modes, select
tꢀSelect to change the ranking of your favorite faces.
f
“
>
“
“
.
f
“
“
.)
See page 69 for more information about the face list.
Shooting options 56
Adjusting brightness and color
Learn how to adjust the brightness and color for better image quality.
Select
.
Adjusting the exposure manually (EV)
pdvD
3
tꢀ The adjusted exposure value will appear as shown below.
Depending on the intensity of the ambient light, your photos
may be too bright or dark. In these cases, you can adjust the
exposure to get a better photo.
tꢀ Once you adjust the exposure, the setting will remain the same. You
may need to change the exposure value later to avoid overexposure
or underexposure.
Darker (-)
Neutral (0)
Brighter (+)
tꢀ If you cannot decide on an appropriate exposure, select AEB (Auto
Exposure Bracket). The camera takes photos with different exposures:
normal, underexposed, and overexposed. (p. 62)
In Shooting mode, select
f
“
.
1
2
Select a value to adjust the exposure.
tꢀ +: brighter, -: darker
EV
-2
-1
0
+1
+2
Shooting options 57
Adjusting brightness and color
p
Compensating for backlighting (ACB)
Option
Description
When the light source is behind your subject or there is high
contrast between your subject and the background, your subject
is likely to appear dark in the photo. In this case, set the Auto
Contrast Balance (ACB) option.
Off: ACB is off.
On: ACB is on.
tꢀ The ACB feature is always on in the
a
mode.
tꢀ This feature is not available when Continuous, Motion Capture, or
AEB is in use.
Without ACB
With ACB
In Shooting mode, select
Select an option.
f
“
>
“
.
1
2
Off
Shooting options 58
Adjusting brightness and color
pdvD
Changing the metering option
Option
Description
The metering mode refers to the way in which a camera
measures the quantity of light. The brightness and lighting of your
photos will vary depending on the metering mode you select.
Spot:
tꢀ Your camera measures only the light intensity of the
very center of the frame.
tꢀ If a subject is not in the center of the scene, your
photo may be improperly exposed.
In Shooting mode, select
f
“
>
“
.
1
2
(In the
v
and
D
modes, select
f
“
.)
tꢀ Suitable for a subject with backlighting.
Center-weighted:
tꢀ Your camera averages the meter reading of the
entire frame with emphasis placed on the center.
Select an option.
tꢀ Suitable for photos with subjects in the center of
the frame.
Multi
Option
Description
Multi:
tꢀ Your camera divides the scene into several areas,
and then measures the light intensity of each area.
tꢀ Suitable for general photos.
Shooting options 59
Adjusting brightness and color
Selecting a light source (White balance)
pdvD
Auto WB
The color of your photo depends on the type and quality of the
light source. If you want the color of your photo to be realistic,
select an appropriate lighting condition to calibrate the white
balance, such as Auto WB, Daylight, Cloudy, or Tungsten.
Option
Description
Auto WB: Use automatic settings depending on the
lighting conditions.
Daylight: Select when taking outdoor photos on a
sunny day.
Auto WB
Daylight
Cloudy: Select when taking outdoor photos on a
cloudy day or in shadows.
Fluorescent_H: Select when shooting under a
daylight fluorescent or three-way fluorescent light.
Fluorescent_L: Select when shooting under white
fluorescent light.
Cloudy
Tungsten
Tungsten: Select when taking indoor photos under
incandescent bulbs or halogen lamps.
In Shooting mode, select
Select an option.
f
“
.
1
2
Custom Set: Use your pre-defined settings. (p. 61)
Shooting options 60
Adjusting brightness and color
Defining your own white balance
You can customize the white balance by taking photos of a white
surface, such as a piece of paper. This will help you to match
the colors in your photo with the actual scene according to your
lighting condition.
In Shooting mode, select
f
“
“
.
1
2
Aim the lens at a piece of white paper.
Press [Shutter].
3
Shooting options 61
ps
Using burst modes
It can be difficult to take photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos.
In these cases, select one of the burst modes.
Option
Description
Motion Capture: While you are pressing [Shutter],
the camera takes VGA photos (6 photos per second;
maximum of 30 photos).
AEB:
tꢀ Take 3 photos with different exposures: normal,
underexposed, and overexposed.
tꢀ Use a tripod to prevent blurry photos.
In Shooting mode, select
Select an option.
f
“
>
(once or twice) “
.
1
2
The options may differ depending on the shooting mode.
tꢀ You can use the flash, timer, and ACB only when you select
Single.
tꢀ When you select Motion Capture, the resolution will be set to
VGA and the ISO speed will be set to Auto.
tꢀ Depending on the selected face detection option, some burst
options are not available.
Single
Option
Description
Single: Take a single photo.
Continuous:
tꢀ While you are pressing [Shutter], the camera takes
photos continuously.
tꢀ The maximum number of photos depends on the
capacity of your memory card.
Shooting options 62
Improving your photos
Learn how to improve your photos by applying photo styles, colors, or smart filter effects, or make some adjustments.
Defining your own RGB tone
apdv
Applying photo styles
Apply different styles to your photos, such as Soft, Vivid, or
Forest.
In Shooting mode, select
f
“
>
(once or twice) “
1
“
.
Select a color (R: Red, G: Green, B: Blue).
Adjust the amount of the selected color.
2
3
Soft
Vivid
Forest
Custom RGB
In Shooting mode, select
Select an option.
f
“
>
(once or twice) “
.
1
2
tꢀ Select
to define your own RGB tone.
Select
.
4
Normal
tꢀ When you select Sketch, the photo will be automatically resized
to or smaller.
tꢀ If you use this function, you cannot set the smart filter and image
adjustment options.
Shooting options 63
Improving your photos
apdv
In Shooting mode, select
Select an effect.
f
“
>
(once or twice) “
.
Applying smart filter effects
1
2
Apply various filter effects to your photos to create unique images.
Option
Description
Normal: No effect
Miniature: Make a photo of a life-size location or
object look like a photo of a miniature scale model.
Blurring parts of the photo makes the scene seem
much smaller than it actually is.
Miniature
Vignetting
Fish-eye 2
Vignetting: Apply the retro-looking colors, high
contrast, and strong vignette effect of lomo cameras.
Fish-eye 1: Distort close objects to imitate the visual
effect of a fisheye lens.
Fish-eye 2: Blacken the edges of the frame and
distort objects to imitate the visual effect of a fisheye
lens.
Fish-eye 1
tꢀ If you select Miniature when recording a video, the miniature
recording time is displayed with the
real recording time.
icon and is shorter than the
tꢀ If you select Miniature when recording a video, the sound will not
be recorded.
tꢀ When you apply a smart filter effect while recording a video, the video
will be automatically resized to
or smaller.
tꢀ If you use this function, you cannot set the photo style and image
adjustment options.
Shooting options 64
Improving your photos
p
Adjusting your photos
Contrast option
Description
Adjust the sharpness, saturation, and contrast of your photos.
-
Decrease the color and brightness.
Increase the color and brightness.
+
In Shooting mode, select
f
“
>
(twice) “
.
1
2
Saturation option
Description
Select an adjustment option.
-
tꢀ
tꢀ
tꢀ
: Sharpness
Decrease the saturation.
Increase the saturation.
: Contrast
+
: Saturation
Select a value to adjust the selected item.
3
tꢀ Select 0 if you do not want to apply any effects (suitable for printing).
tꢀ If you use this function, you cannot set the smart filter effects.
Sharpness
-2
-1
0
+1
+2
Sharpness option
Description
Soften the edges on your photos (suitable
for editing the photos on your computer).
-
Sharpen the edges to improve the clarity
of your photos. This may also increase the
noise on your photos.
+
Shooting options 65
Playing back
Learn actions to play back photos, videos, or voice memos, and managing files.
Viewing files using motion recognition
Starting Playback mode
View photos or play videos and voice memos stored in your
camera.
You can view files by tilting the camera.
Press [Playback].
tꢀ The most recent file you have taken or recorded will be
displayed.
1
tꢀ If the camera is off, it will turn on.
Draw a horizontal bar left or right to scroll through files.
2
tꢀ Select
<
to view the previous file. Hold to view files quickly.
tꢀ Select
>
to view the next file. Hold to view files quickly.
tꢀMotion recognition may not work well if you hold the camera
parallel to the ground.
tꢀWhen you rotate the camera 90o or 180o while viewing a photo,
the camera will automatically change the orientation of the
displayed photo according to the camera direction.
tꢀTo deactivate this function, select M“ . “ Gesture View
“ Off in Playback mode.
tꢀ If you want to view files stored in the internal memory, remove your
memory card.
tꢀ The camera will not properly play back files that are too large or those
taken with cameras from other manufacturers.
Playback/Editing 67
Playing back
Selecting a menu using motion recognition
Your camera features a built-in motion sensor that allows you to
quickly select a menu by tilting the camera.
In Playback mode, tilt the camera while touching and
holding
.
Set the current photo as your favorite photo*
(
will appear on the top of the file.)
Start a slide show (p. 74)
Motion recognition may not work well if you hold the camera parallel to the
ground, as shown below.
Lock or unlock the current file
(
will appear on the top of the file.)
* You cannot set files as favorites for:
-
-
-
-
-
videos or voice memos
photos with errors or locked photos
photos taken with cameras from other manufacturers
photos taken using the motion capture option set
photos that are too large for the available memory
Playback/Editing 68
Playing back
Display in Playback mode
Icon
Description
Select a menu using motion recognition (p. 68)
Use network menus and the Bluetooth feature (p. 94)
Playback and settings menus
N
M
Information
Playback time of videos or voice memos
Play videos or voice memos
(Video p. 75/Voice memo p. 76)
Icon
Description
Ranking your favorite faces
Photo includes a voice memo
Video file
You can change the ranking of your favorite faces or delete them.
This feature is available only when you use a memory card.
v
Print order has been set (DPOF)
Protected file
In Playback mode, select
Face List
.
1
Photo includes a registered face; Available only when you
use a memory card
1
2
3
4
5
6
Favorite file
Folder name – File name
Open the face list (p. 69); Available only when you use a
memory card
1/2
Delete files (p. 72)
Play a slide show (p. 74)
Edit photos (p. 78)
tꢀ Select
tꢀ Select
to cancel your favorite faces.
to view your favorite faces or view all faces.
Select a display type (p. 26)
Playback/Editing 69
Playing back
Select
“ a face.
2
Option
Type
Description
View files by the file type.
Edit Ranking
Date
View files by the date they were saved.
View files by the dominant color of the image.
View files by the weekday they were saved.
View your favorite files.
1
2
3
4
Color
Week
Favorite
View files by recognized faces and favorite faces.
(Up to 20 people)
Face
Select
select
,
.
or
.
to change the ranking of the face and
3
It may take some time for the camera to open Smart Album or to change
the category and reorganize files.
Select a date, file type, weekday, color, or face.
2
Viewing files by category in Smart Album
tꢀ You can also touch and hold
<
or
>
to scroll through dates,
View and manage files by categories, such as date, file type, or
week.
file types, weekdays, colors, or faces.
Select
Select
<
or
>
to scroll through files.
3
4
In Playback mode, select
tꢀ You can also access Smart Album by rotating [Zoom] left.
“
“ a category.
1
to return to the normal view.
Once you select a category and a menu that displays thumbnails (such as
deleting multiple files or protecting selected files), the camera will display all files
sorted by category or only those that match the category option.
Type
Date
Color
Week
Favorite
1
6
7
20
Face
Playback/Editing 70
Playing back
Viewing files as thumbnails
Protecting files
Scan thumbnails of files.
Protect your files from accidental deletion.
In Playback mode, rotate [Zoom] left to display 9 or 16
thumbnails (rotate [Zoom] right to return to the previous
To select and protect files,
mode).
In Playback mode, select
M.
1
2
3
Select Protect “ Select.
Select files you want to protect.
tꢀ Select
to select all files.
tꢀ Select
to cancel your selection.
29
1
6
7
20
To
Do this
Scroll through files
View a file
Select
<
or
>.
Select a thumbnail.
Select . (p. 72)
Delete files
Select
.
4
Select a category
Select
.
Playback/Editing 71
Playing back
To protect all files,
To delete all files,
In Playback mode, select
M
.
In Playback mode, select
M.
1
1
Select Protect “ All “ Lock.
Select Delete “ All “ Yes.
2
2
Alternate way to delete a file
Deleting files
While viewing a file in Playback mode, draw an X on the
screen.
Delete single files or all files at once. You cannot delete protected
files.
To delete a single file,
In Playback mode, select a file “
.
1
2
Select Yes to delete the file.
To delete multiple files,
In Playback mode, select “ Multiple Delete.
1
2
Select files you want to delete.
tꢀ Select
to select all files on the current screen.
tꢀ Select
to cancel your selection.
Select
“ Yes.
3
Playback/Editing 72
Playing back
Using the recycle bin
Copying files to the memory card
If you activate the recycle bin, files you delete will be sent to the
recycle bin instead of being deleted permanently. This applies to
single files or selected files only–if you choose to delete all files,
those files will not be sent to the recycle bin.
You can copy files from the internal memory to a memory card.
In Playback mode, select
M.
1
2
3
Select
.
“ Copy to Card.
Select Yes to copy files.
To activate the recycle bin,
In Playback mode, select
M.
1
2
Select Recycle Bin “ On.
Viewing photos
To restore files from the recycle bin,
View a photo by changing the orientation by gesture or zooming
in on part of a photo or view photos as a slide show.
In Playback mode, select
M.
1
2
Rotating a photo by gesture
Select Recycle Bin “ Retrieve.
While viewing a single file, drag your finger as shown below to
rotate the photo 90°.
tꢀ This function does not work for videos or voice memos.
tꢀ It may take longer to delete files when using the recycle bin function.
tꢀ If you format the internal memory, all files in the recycle folder will be
deleted.
tꢀ The recycle bin will hold up to 10 MB of files. Once you exceed the
10 MB limit, the camera asks you whether to empty the recycle bin.
Select Yes to empty the recycle bin or No to delete only the current
file.
Playback/Editing 73
Playing back
Enlarging a photo
Starting a slide show
You can apply effects and audio to your slide show. This function
does not work for videos or voice memos.
In Playback mode, rotate [Zoom] right to enlarge a
photo (rotate [Zoom] left to reduce a photo).
In Playback mode, select
Set a slide show effect.
.
1
2
The enlarged area and zoom ratio are indicated on the top of the
screen. The maximum zoom ratio may vary depending on the
resolution. Select arrows to move the enlarged area.
Option
Description
Images: Select photos (up to 2.000) for your slide
show.
Play Mode: Select whether or not to loop the slide
show.
Icon
Description
Delete the file.
Interval: Set the interval between photos.
Crop the enlarged photo (it will be saved as a new file).
Go back to the original view.
tꢀ This will be available when
Effect menu.
is selected in the
tꢀ When used with an effect option other than
, the
interval will be set to 1 sec.
Playback/Editing 74
Playing back
Option
Description
Playing a video
You can play a video, capture an image from a video, or crop a
video.
Music: Select background audio.
Effect:
tꢀ Select a transition effect.
In Playback mode, select a video “
.
1
2
tꢀ Select
for no effects.
Use the following icons to control playback.
Select
to start the slide show.
3
tꢀ Touch on the screen (except for option icons) to pause the
slide show.
tꢀ Select
mute the sound.
tꢀ Select
to adjust the volume of background audio or to
to switch to Playback mode.
Icon
Description
Scan backward.
Pause or resume playback.
Stop playback.
/
Scan forward.
Adjust volume or mute sound.
Playback/Editing 75
Playing back
Trimming a video during playback
Playing a voice memo
Select at the point where you want the new video to
1
Playing a voice memo
begin and select
.
In Playback mode, select a voice memo “
.
1
Select to resume playback.
2
3
Use the following icons to control playback.
2
Select at the point where you want the new video to
end and select
.
Select Yes.
4
tꢀ The original video should be at least 10 seconds long.
tꢀ The edited video will be saved as a new file.
Icon
Description
Capturing an image during playback
Scan backward.
Pause or resume playback.
Stop playback.
Select at the point where you want to save a still
image.
1
/
Select
.
Scan forward.
2
3
Adjust volume or mute sound.
Select Yes.
A captured image will have the same file size as the original video file and will
be saved as a new file.
Playback/Editing 76
Playing back
Adding a voice memo to a photo
Playing a voice memo added to a photo
In Playback mode, select a photo “
M
.
In Playback mode, select a photo that includes a voice
1
1
2
memo “
.
Select Voice Memo “ On.
2
3
Use the following icons to control playback.
Press [Shutter] to record a short voice memo (10
seconds maximum).
tꢀ Press [Shutter] to stop recording a voice memo.
Icon
Description
Pause or resume playback.
Stop playback.
/
Adjust volume or mute sound.
Playback/Editing 77
Editing a photo
Perform photo editing tasks, such as rotating, resizing, eliminating red-eyes, and adjusting brightness, contrast, or saturation.
tꢀ Edited photos will be saved as new files.
tꢀ When you edit photos that are
or larger, they will be automatically resized to
a lower resolution (except when rotating or resizing photos).
Rotating a photo
Resizing photos
In Playback mode, select a photo “
.
In Playback mode, select a photo “
.
1
2
1
Select
“ an option.
Select
“ an option.
to save the photo as a start image. (p. 113)
2
tꢀ Select
Left 90˚
1920 X 1080
Select
.
3
Select
.
3
Available options differ depending on the size of the selected photo.
Playback/Editing 78
Editing a photo
Defining your own RGB tone
Applying photo styles
Apply a different color tone to the photo, such as Soft, Vivid, or
Forest.
In Playback mode, select a photo “
“
“
.
1
Select a color (R: Red, G: Green, B: Blue).
Adjust the amount of the color.
2
3
Custom RGB
Soft
Vivid
Forest
In Playback mode, select a photo “
.
1
2
Select
“ an option.
to define your own RGB tone.
tꢀ Select
Select
.
4
Soft
Select
.
3
Playback/Editing 79
Editing a photo
Applying a special effect
Apply special effects to the photo, such as color filters or noise
effects.
Correcting exposure problems
Adjust ACB (Auto Contrast Balance), brightness, contrast, or
saturation.
In Playback mode, select a photo “
.
1
2
Adjusting brightness/contrast/saturation
Select
“ an option.
In Playback mode, select a photo “
.
1
2
Select
“ an adjustment option.
: Brightness
: Contrast
: Saturation
tꢀ
tꢀ
tꢀ
Elegant
Select a value to adjust the selected item.
(-: less or +: more)
3
4
Select
.
Option
Description
Color Filter: Change background colors to black and
white to make the main subject stand out.
Adjusting ACB (Auto Contrast Balance)
Elegant: Apply effects to the photo to make it brighter
and softer.
In Playback mode, select a photo “
.
1
2
3
Add Noise: Add noise to the photo to give it an aged
look.
Select
Select
“
.
.
Select
.
3
Playback/Editing 81
Editing a photo
Editing photos of portraits
You can improve your photos by hiding facial imperfections and
removing red-eye.
Creating a print order (DPOF)
Select photos to be printed and set options, such as number of
copies or paper size.
tꢀ The memory card can be taken to a print shop that supports DPOF
(Digital Print Order Format) or you can print photos directly through a
DPOF-compatible printer at home.
tꢀ Wide photos may print with the left and right edges cut off, so be
aware of the dimensions of your photos.
Hiding facial imperfections
In Playback mode, select a photo “
.
1
2
3
Select
“
.
tꢀ You cannot set the DPOF for the photos stored in the internal memory.
Select a level.
tꢀ As the number increases, more imperfections are hidden.
Select
In Playback mode, select
M.
1
2
.
4
Select
.
“ DPOF “ Select.
tꢀ To print all files, select All and skip to step 5.
Removing red-eye
Select photos to print.
3
4
tꢀ Select
to select all files.
In Playback mode, select a photo “
.
1
2
3
tꢀ Select
to cancel your selection.
Select
Select
“
.
Select
.
.
Playback/Editing 82
Editing a photo
Set DPOF options.
5
Option
Description
Select whether to print the photos as thumbnails.
(Select
to print photos as thumbnails.)
Specify the size of the print.
Select
Select
,
or
.
to set the number of copies.
6
7
.
If you specify the print size, you can print photos only with DPOF 1.1-compatible
printers.
Playback/Editing 83
Viewing files on a TV or HDTV
Play back photos or videos by connecting your camera to a TV using the A/V cable.
View photos or play videos using the touch screen on
your camera.
tꢀ The touch screen will function as the controller for the TV
screen. Locate the option you want on the TV screen and
touch where the option is located on the camera screen.
When a pointer appears on the option on the TV screen,
In Shooting or Playback mode, select
M
“
.
8
1
2
3
Select
.
(twice) “ Video Out.
Select a video signal output according to your country or
region. (p. 115)
select
on the camera screen.
Turn off your camera and TV.
4
5
Connect your camera to your TV using the A/V cable.
tꢀ On some TVs, digital noise may occur or part of an image may not
appear.
tꢀ Images may not appear centered on the TV screen depending on
Audio
Video
your TV settings.
tꢀ You can capture photos or videos while the camera is connected
to a TV.
Turn on your TV and select the video output mode using
the TV remote control.
6
7
Turn on your camera and press [Playback].
Playback/Editing 84
Viewing files on a TV or HDTV
Viewing files on an HDTV
Turn on your camera.
6
7
•
The HDTV will be powered on automatically and the camera
You can view high-quality and uncompressed photos or videos
on an HDTV using the optional HDMI cable. HDMI (High Definition
Multimedia Interface) is supported by most HDTVs.
screen will be displayed.
View files using a remote control of your camera or
HDTV.
In Shooting or Playback mode, select
M
→
.
1
2
3
4
5
Select
.
(twice) → HDMI Size.
If your HDTV supports the Anynet+(CEC) profile, turn the Anynet+ on in the
settings menu (p. 115) to control all connected Samsung A/V devices with the
TV remote control.
Select an HDMI resolution.
Turn off your camera and HDTV.
Connect your camera to your HDTV using an optional
HDMI cable.
Playback/Editing 85
Transferring files to your computer (for Windows)
Transfer files to your computer using the built-in Intelli-studio program. You can also edit files or upload files to your favorite websites.
Requirements for Intelli-studio
tꢀ Intelli-studio may not perform correctly on some computers, even
when the computer meets the requirements.
tꢀ If your computer does not meet the requirements, videos may not play
correctly or it may take longer to edit videos.
tꢀ Install DirectX 9.0c or above before you use the program.
tꢀ You must use Windows XP/Vista/7 or Mac OS 10.4 or later to
connect the camera as a removable disk.
Item
CPU
Requirements
Intel Pentium 4, 3.2 GHz or higher/
AMD AthlonTM FX 2.6 GHz or higher
Minimum 512 MB RAM
(1 GB and above recommended)
RAM
OS
Windows XP SP2/Vista/7
Hard disk
capacity
250 MB or more (1 GB or more recommended)
tꢀ CD-ROM driver
Using a self-assembled PC or a PC and OS that are not supported may void
your warranty.
tꢀ nVIDIA Geforce 7600GT or higher/ATI X1600 series
or higher
Others
tꢀ 1024 X 768 pixels, 16-bit color display compatible
monitor (1280 X 1024 pixels, 32-bit color display
recommended)
tꢀ USB port, Microsoft DirectX 9.0c or later
Playback/Editing 86
Transferring files to your computer (for Windows)
Turn on the camera.
tꢀ The computer recognizes the camera automatically.
Transferring files using Intelli-studio
Intelli-studio will start automatically when you connect the camera
to your computer with the USB cable.
5
If you set the USB option to Select Mode, select Computer from the
pop-up window.
The battery will be charged while the camera is connected to a computer with
the USB cable.
Select a folder on your computer to save new files.
tꢀ If your camera has no new files, the pop-up window for saving
new files will not appear.
6
7
In Shooting or Playback mode, select
M
“
.
1
2
3
4
Select
.
(twice) “ PC Software “ On.
Select Yes.
tꢀ New files will be transferred to the computer.
Turn off the camera.
For Windows Vista, select Run iStudio.exe from the AutoPlay window.
Connect the camera to your computer with the USB
cable.
You must plug the end of the cable with the indicator light (S) into
your camera. If the cable is reversed, it may damage your files. The
manufacturer is not responsible for any loss of data.
Playback/Editing 87
Transferring files to your computer (for Windows)
Using Intelli-studio
Intelli-studio is a built-in program that allows you to play back and edit files. You can also upload files to websites, such as Flickr or YouTube.
For details, select Help “ Help in the program.
tꢀ If you install Intelli-studio on your computer, the program will launch more quickly. To install the program, select Tool “ Install Intelli-studio on PC.
tꢀ You cannot edit files directly on the camera. Transfer files to a folder on your computer before editing.
tꢀ You cannot copy files in your computer to the camera.
tꢀ Intelli-studio supports the following formats:
-
-
Videos: MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9), AVI (MJPEG)
Photos: JPG, GIF, BMP, PNG, TIFF
1
2
3
4
5
6
7
15
14
13
8
9
12
10
11
Playback/Editing 88
Transferring files to your computer (for Windows)
Transferring files by connecting the camera
as a removable disk
Icon
Description
1
Open menus
You can connect the camera to your computer as a removable
disk.
2
3
4
Display files in the selected folder
Change to the Photo edit mode
Change to the Video edit mode
In Shooting or Playback mode, select
M
“
.
1
2
3
Change to the Sharing mode (You can send files by email
or upload files to websites, such as Flickr or YouTube.)
5
Select
.
(twice) “ PC Software “ Off.
6
7
Enlarge or reduce the thumbnails in the list
Select a file type
Connect the camera to your computer with the USB
cable.
8
View files of the selected folder on your computer
Show or hide files of the connected camera
View files of the selected folder on the camera
View files as thumbnails, in Smart Album, or on a map
Browse folders in the connected device
Browse folders in your computer
You must plug the end of the cable with the indicator light (S) into
your camera. If the cable is reversed, it may damage your files. The
manufacturer is not responsible for any loss of data.
9
10
11
12
13
14
Move to the previous or next folder
Print files, view files on a map, store files in My Folder, or
register faces
15
Playback/Editing 89
Transferring files to your computer (for Windows)
Turn on the camera.
tꢀ The computer recognizes the camera automatically.
4
Disconnecting the camera (for Windows XP)
The way to disconnect the USB cable for Windows Vista/7 is
similar.
If you set the USB option to Select Mode, select Computer from the
pop-up window.
If the status lamp on your camera is blinking, wait until
it stops.
1
On your computer, select My computer “ Removable
Disk “ DCIM “ 100PHOTO.
5
Click
screen.
on the tool bar at the bottom right of your PC
2
Select the files you want and drag or save them to your
computer.
6
Click the pop-up message.
Remove the USB cable.
3
4
The camera may not be removed safely when Intelli-studio is running.
End the program before disconnecting the camera.
Playback/Editing 90
Transferring files to your computer (for Mac)
When you connect the camera to a Macintosh computer, the computer will recognize the device automatically. You can transfer files directly
from the camera to the computer without installing any programs.
Mac OS 10.4 or later is supported.
Connect your camera to a Macintosh computer with the
USB cable.
Turn on the camera.
tꢀ The computer recognizes the camera automatically and a
removable disk icon will be displayed.
1
2
You must plug the end of the cable with the indicator light (S) into
your camera. If the cable is reversed, it may damage your files. The
manufacturer is not responsible for any loss of data.
If you set the USB option to Select Mode, select Computer from the
pop-up window.
Double-click the removable disk icon.
3
4
Transfer photos or videos to the computer.
Playback/Editing 91
Printing photos with a photo printer (PictBridge)
Print photos with a PictBridge-compatible printer by connecting your camera directly to the printer.
Select
tꢀ Select
settings” on page 93.
to print.
In Shooting or Playback mode, select
M
“
.
5
1
2
3
to set printing options. See “Configuring print
Select
.
(twice) “ USB “ Printer.
With the printer on, connect your camera to the printer
with the USB cable.
Select an option.
6
Turn on your camera.
tꢀ The printer recognizes the camera automatically.
4
Option
Description
Print the currently selected photo. Skip to
step 8.
Current Photo
Selected Photos
All Photos
Print the photos you want.
Print all photos. Skip to step 8.
Playback/Editing 92
Printing photos with a photo printer (PictBridge)
Select
<
or
>
to scroll to a photo to print.
to set the number of copies and select
7
8
Option
Description
Date: Set to print the date.
File Name: Set to print the name of the file.
Reset: Reset the print options.
Select
.
,
or
.
tꢀ If you selected to print the photos you want, repeat steps 7-8
for all photos to print.
Select Yes to confirm.
tꢀ Printing starts. Select Cancel to cancel printing.
9
Some options are not supported by some printers.
Configuring print settings
Option
Description
Size: Specify the size of the print.
Layout: Create thumbnail prints.
Type: Select the type of paper.
Quality: Set the printing quality.
Playback/Editing 93
Connecting to a WLAN and configuring network settings
Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings and learn how to
enter text.
This camera uses non-harmonised frequencies and is intended for use in all European countries.
The WLAN can be operated indoors in the EU without restriction, but cannot be operated outdoors in France.
Connecting to a WLAN automatically
Icon
Description
WPS AP
In Shooting or Playback mode, select
N
“
n.
1
2
Secured AP
Ad hoc AP
Signal strength
Select AP Setting.
tꢀ The camera will search for and display available AP devices.
Select an AP device.
3
tꢀ The camera will connect to the WLAN.
AP Setting
Samsung 1
Samsung 2
tꢀ If the selected AP device supports the WPS profile, select
WPS on the next screen and press the WPS button or enter
a PIN on the AP device. You can configure the WPS setting to
press the WPS button or enter a PIN on the AP device. (p. 99)
tꢀ If the selected AP device requires a password, continue with
the next step.
Samsung 3
Wireless network/Bluetooth 95
Connecting to a WLAN and configuring network settings
Select network profiles and options.
4
Connecting to a WLAN manually
Option
Description
In Shooting or Playback mode, select
N
“
n.
1
2
Authentication
Data Encryption
Select a network authentication.
Select an encryption type.
Select AP Setting.
tꢀ The camera will search for and display available AP devices.
Select the password input field.
5
6
Select an AP device.
3
4
5
Enter a password and select OK.
tꢀ For information about entering text, refer to page 100.
Select IP Setting “ Manual.
Select the network profiles.
Select OK.
7
Option
Description
tꢀ The camera will connect to the WLAN.
tꢀ On the top line of the screen, you can check the network
signal status.
IP
Enter the static IP address.
Enter the subnet mask.
Enter the gateway.
Subnet Mask
Gateway
DNS Server
Icon
Description
Enter the DNS address.
Signal is found.
No signal is found.
Enter values and select OK.
6
7
When you are finished, select OK.
tꢀ The camera will connect to the WLAN.
Wireless network/Bluetooth 96
Connecting to a WLAN and configuring network settings
tꢀWhen connecting to the network, you will be charged according
to your contract with your network service provider.
Network connection tips
tꢀSome AP devices will not allow your camera to connect to the
tꢀYou can use only free WLANs with your camera. If you use
free WLANs that require the user agreement and additional
information when you connect to a web browser, some features
may be limited when connecting to websites or sending email.
network.
tꢀIf you are far from the AP device, it may take long to connect to
the network.
tꢀIf there is any electronic equipment nearby that uses the same
radio frequency (RF) signals, the camera may not connect to
the AP device.
tꢀFrequency ranges allow you to connect to the network will differ
depending on the country.
tꢀThe WLAN feature of your camera must comply with radio
transmission laws, so use of this feature may be restricted
in some countries. We recommend that you use the WLAN
feature in the country where you purchased the camera.
tꢀIf the AP device has a non-English name, it may not appear in
the search list or the name may appear jumbled or incomplete.
tꢀFor network profiles and a password, contact your network
administrator or network service provider.
tꢀFor network profiles and a password, contact your network
administrator or network service provider.
tꢀIf the network requires any authentication from the service
provider, you may not connect to it. Contact your network
service provider.
tꢀMethods of configuring the network profiles may differ
depending on the network environment.
tꢀThe number of characters and numbers allowed for the
encryption key differs depending on the encryption type.
tꢀDo not access a network that you are not allowed to use.
tꢀUse a fully charged battery while connecting to the network.
tꢀA WLAN connection may not be possible depending on your
surroundings.
tꢀWhen connecting to the network using Auto IP, make an
autoip.txt file and copy it to the inserted memory card.
tꢀWhen searching for networks, you may be able to find a printer
that supports the network. However, you cannot use the printer
to connect to a network.
tꢀThe camera cannot connect to the network if it is connected to
a TV with the A/V cable. Also, when the camera is connected
to the network, you cannot view files on a TV screen even when
connected with the A/V cable.
Wireless network/Bluetooth 97
Connecting to a WLAN and configuring network settings
Storing your information
Store your name and email address to send emails or to find out
your camera on another device.
Storing email addresses
Store up to 10 email addresses in your camera. You can use
them when you send your photos via email.
In Shooting or Playback mode, select
N
“
n
.
In Shooting or Playback mode, select
N
“
n.
1
2
3
1
2
Select User Setting.
Select Email Address.
Select the name input field and enter your name.
tꢀ For information about entering text, refer to page 100.
Email Address Book
Samsung
When you are finished, select OK.
4
5
6
7
Select the email input file and enter your email address.
When you are finished, select OK.
Select OK to save your information.
tꢀ Select
tꢀ Select
to display the recent recipient email addresses.
to edit the email address.
tꢀ Select to delete the email address.
Select
.
3
4
5
Enter a name and email address.
When you are finished, select OK.
Wireless network/Bluetooth 98
Connecting to a WLAN and configuring network settings
Setting the file size to share
Setting a password
Restrict sending emails and configuring network settings by
setting a password.
Set the file size you will share with other DLNA-authorised
devices. You can select either the original size or
.
In Shooting or Playback mode, select
N
“
n.
In Shooting or Playback mode, select
Select DLNA -Image Size.
Select a size.
N
“
n.
1
2
3
4
1
2
3
Select
.
“ Setting Password “ On “ Confirm.
Enter a password (4 digits).
Enter the password (4 digits) again.
To reset a password, select Reset from the password input window.
If you reset the password, your stored email addresses, recently sent email
addresses, and all personal information will be deleted to protect user
information.
Configuring the WPS setting
Configure this setting to press a WPS button or enter a PIN when
connecting to a WLAN with an AP device that supports the WPS
profile.
In Shooting or Playback mode, select
N
“
n.
1
2
3
Select
.
“ WPS Type.
Select PBC to press the WPS button or PIN to enter a
PIN.
Wireless network/Bluetooth 99
Connecting to a WLAN and configuring network settings
Changing the password
Change the password if necessary.
Entering text
To enter text when storing your information or email addresses,
select the appropriate letters, symbols, and numbers.
In Shooting or Playback mode, select
N
“
n.
1
2
3
4
5
User Setting: Name
Select
.
“ Change Password.
Enter the current password (4 digits).
Enter a new password (4 digits).
Enter the new password (4 digits) again.
Icon
Description
Move the cursor.
Checking information
Check the Mac address and serial number of your camera to
register it with the Samsung website.
Enter capital letters or small letters, and change symbols.
Enter letters.
Enter a space.
In Shooting or Playback mode, select
N
“
n.
1
2
Delete the last letter.
Select
.
“ Device Information.
Enter numbers and symbols.
Store the displayed text.
You can enter text only in English, regardless of the display language.
Wireless network/Bluetooth 100
Using photo or video sharing websites
Upload your photos or videos to file sharing websites (available websites will be displayed on your camera).
Icons on a website
Accessing a website
In Shooting or Playback mode, select
tꢀ The camera automatically connects to the WLAN via the last
connected AP device.
N
“
.
1
tꢀ If the camera has not connected to the WLAN, it automatically
searches for available AP devices. (p. 95)
Select a website.
2
3
Enter your login ID and password, and select Login.
Icon
Description
Previous page
Next page
Stop
Create your login ID and password on a PC in advance.
Refresh
Home
Close
Wireless network/Bluetooth 101
Using photo or video sharing websites
Uploading photos or videos
tꢀ The maximum photo resolution you can upload is
video you can upload is 30 seconds at 320 X 240 resolution or the
video recorded using For Sharing.
, and the longest
Select
Select
.
1
2
3
tꢀ If the selected photo resolution is higher than
, it will be
<
or
>
to scroll through files.
automatically resized to a lower resolution.
tꢀ When the total size of all photos selected is smaller than 10 MB, you
can upload them to a website (up to 20 photos).
tꢀ Methods of uploading photos or videos may differ depending on the
selected website.
Drag photos or videos to the selection area or select
photos or videos, and select OK.
tꢀ If you cannot access a website because of firewall or user
authentication settings, contact your network administrator or network
service provider.
tꢀ When you are not able to upload photos or videos due to server
errors, select
.
tꢀ Titles for photos or videos you are uploading could be the date they
are captured.
Date
tꢀ The speed of your internet connection may affect how quickly photos
upload or web pages open.
tꢀ Select Date to categorise the files. (p. 70)
Enter a title and select an album, and then select
.
4
Wireless network/Bluetooth 102
Sending photos via email
Select OK.
In Shooting or Playback mode, select
tꢀ The camera automatically connects to the WLAN via the last
connected AP device.
tꢀ If the camera has not connected to the WLAN, it automatically
searches for available AP devices. (p. 95)
N
“
.
3
4
5
1
Select Text Input and enter your email text.
Select photos, or drag photos to the selection area and
select OK.
tꢀ The photos will be sent to the selected email addresses.
tꢀ The Transfer completed. message will still appear, even
when photos cannot be sent or be sent as spam due to an
error with the recipient's email account.
Enter email addresses for the sender and receiver.
2
Sender/ Receiver
Samsung
Samsung 1
tꢀ When the total size of all photos selected is smaller than 10 MB, you
can send them via email (up to 20 photos).
tꢀ You can enter up to 10 recipients for each email.
tꢀ You may not be able to send an email due network connection or
email account settings.
tꢀ The maximum photo resolution you can send is
and if the
selected photo resolution is higher than
resized to a lower resolution.
tꢀ If you cannot send an email because of firewall or user authentication
settings, contact your network administrator or network service
provider.
, it will be automatically
tꢀ Select
tꢀ Select
tꢀ Select
to enter or modify the email address of the sender.
to retrieve the stored email addresses.
to enter an email address manually.
tꢀ When there are no photos in the camera memory, you cannot use
this feature.
Wireless network/Bluetooth 103
Viewing photos or videos on the DLNA devices
The Digital Living Network Alliance (DLNA) is an international technology standard for sharing media files between networked devices in your
home. With this technology, you can view your photos or videos on a widescreen TV or another device. You cannot send or receive voice
memos.
On the TV, search for the camera and browse the shared
photos or videos.
tꢀ Your camera’s name is what you entered in the user setting.
Viewing photos or videos on a TV screen
View your photos or videos on a TV that supports the DLNA-
authorized Digital Media Player (DMP).
4
(p. 98)
In Shooting or Playback mode, select
tꢀ The camera automatically connects to the WLAN via the last
connected AP device.
N
“
.
tꢀ For information about searching for the camera and browsing
the photos or videos on the TV, refer to the TV user manual.
1
tꢀ If the camera has not connected to the WLAN, it automatically
searches for the available AP devices. (p. 95)
Select Selected Files.
tꢀ To share all files, select All Files and skip to step
2
3
.
4
Select photos or videos to share.
AP
You can share up to 1000 photos or videos.
Wireless network/Bluetooth 104
Viewing photos or videos on the DLNA devices
Viewing photos or videos on another device
(renderer)
tꢀ On a TV screen, you can view only photos or videos captured with
your camera.
tꢀ The distance between the camera and TV may be affected by the
AP device.
tꢀ If the camera is connected to 2 TVs, playback may be slowed.
tꢀ The photos will be shared according to the size you set. (p. 99)
The videos will be shared in their original sizes.
tꢀ You can use this feature only with a DLNA-authorised Digital Media
Players (DMPs).
tꢀ Shared photos or videos will not be stored on the TV, but they can be
stored according to the TV specifications.
tꢀ Transferring photos or videos to the TV may take some time
depending on the network connection and the file size.
In Shooting or Playback mode, select
tꢀ The camera automatically connects to the WLAN via the last
connected AP device.
N
“
.
1
tꢀ If the camera has not connected to the WLAN, it automatically
searches for the available AP devices. (p. 95)
tꢀ If the camera has connected to the WLAN, it automatically
searches for and displays the available DLNA-enabled
devices. However, searching for the devices may take some
time.
tꢀ If you power off the camera abnormally while viewing photos or videos
on a TV (ex. removing battery), the TV considers the camera to still
be connected.
tꢀ The order of photos or videos on the camera and TV could be
different.
tꢀ According to the number of photos or videos you want to share, it
may take some time to load your photos or videos and complete the
initial set-up process.
tꢀ While viewing photos or videos on the TV, continuously using the TV
remote or performing additional operations on the TV may prevent this
feature from working properly.
Select a device (renderer) that will play the photos or
videos.
2
3
Drag a photo or video to the selection area or select a
photo or video.
tꢀ The photos or videos will appear on the device’s screen.
tꢀ To view other photos or videos, drag a photo or video to the
selection area one by one on your camera.
tꢀ If you reorder or sort files on the camera while viewing them on a TV,
you must repeat the initial set-up process to update the list of files
on the TV.
tꢀ When there are no photos or videos in the camera memory, you
cannot use this feature.
Wireless network/Bluetooth 105
Viewing photos or videos on the DLNA devices
tꢀ When searching for DLNA-authorised devices on the network, the
camera may not find all devices on the network.
tꢀ If you power off the device abnormally while viewing photos or videos
on a device, the camera considers the device to still be connected.
tꢀ The photos will be shared according to the size you set. (p. 99)
The videos will be shared in their original sizes.
tꢀ You can use this feature only with a DLNA-authorised renderer.
tꢀ The shared photos or videos will not be stored on the device, but they
can be stored according to the device specifications.
tꢀ Transferring photos or videos to the device may take some time
depending on the network connection and the file size.
tꢀ You can transfer files one by one.
tꢀ When there are no photos or videos in the camera memory, you
cannot use this feature.
tꢀ On other devices (renderer), you can view only photos or videos
captured with your camera.
tꢀ When you search for other devices, searching for devices may take
some time depending on the network connection. In this case, try
again.
Wireless network/Bluetooth 106
Sending or receiving photos or videos with a camera
Learn to send or receive photos or videos to or from camera of the same model. You cannot send or receive voice memos.
Sending photos or videos to another camera
Receiving photos or videos from another
camera
In Shooting or Playback mode, select
N
“
.
1
2
In Shooting or Playback mode, select
N
“
.
1
2
Select Send.
tꢀ The camera generates a password and displays it on the
screen while waiting for a connection with the receiving
camera.
Select Receive.
tꢀ On the sending camera, select Send and after some time,
select Receive.
On the receiving camera, select the name of the sending
camera.
tꢀ The sending camera’s name is what you entered in the user
setting. (p. 98)
3
Select the name of the sending camera.
3
4
Enter the sending camera’s password and select OK.
tꢀ The password will appear on the screen of the sending
camera.
Enter the password (4 digits) on the receiving camera.
tꢀ The selection area automatically appears on the sending
camera.
4
5
tꢀ When the sending camera transmits photos or videos, they
will appear on the receiving camera.
Drag photos or videos to the selection area or select
them.
tꢀ The photos or videos will be sent to the receiving camera.
Wireless network/Bluetooth 107
Sending or receiving photos or videos with a camera
tꢀ This feature uses an ad hoc wireless network.
tꢀ You cannot send and receive files at the same time. Once you
have received files, end the connection with the camera and then
reconnect to the camera to send photos or videos.
tꢀ The distance between two cameras may be affected by the efficiency
of the ad hoc wireless network.
tꢀ If a camera turns off abnormally while sending or receiving photos or
videos, the other camera considers the camera to still be connected.
Cameras will be disconnected after some time.
tꢀ It may take some time to send or receive photos or videos depending
on the file size and the ad hoc network connection.
tꢀ You can transfer files one by one.
tꢀ If you fail to receive or send a photo or videos, it will not be saved on
the receiving camera.
tꢀ When there are no photos in the camera memory, you cannot use
this feature.
tꢀ You can send and receive photos or videos taken with your camera or
other camera only.
tꢀ If you select the original size in the DLNA-image size setting, you can
send or receive the photos without transformation. However, if you
select
and the selected photo resolution is higher than
, it will
be automatically resized to a lower resolution. (p. 99)
tꢀ You can send or receive videos smaller than 35 MB only.
Wireless network/Bluetooth 108
Sending photos via Bluetooth
Bluetooth is a wireless protocol for exchanging data over short distances. With Bluetooth, you can send photos to other mobile phones or
PDAs. However, you cannot receive photos from other devices and you cannot send videos or voice memos.
Enter a password (4~6 digits) and select OK.
tꢀ If you enter a 6-digit password, you do not need to select OK.
In Shooting or Playback mode, select
tꢀ The Bluetooth feature turns on. However, other Bluetooth-
enabled devices cannot find your camera.
N
“
.
4
1
2
Enter the same password on the device.
Drag photos to the selection area or select photos.
Select Images
5
6
To search for and display Bluetooth-enabled devices,
select Yes.
tꢀ If you have searched for the Bluetooth-enabled devices, a list
of Bluetooth-enabled devices appears. Select
again.
to search
Select a Bluetooth-enabled device.
3
Date
Bluetooth: Device Search
Samsung 1
Samsung 2
tꢀ The photos will be sent to the selected device.
tꢀ The photo size will be changed to 640 X 480 (VGA).
tꢀ Select
.
to view other devices.
tꢀ When searching for Bluetooth-enabled devices, you may be
able to find other devices. However, you can send photos
only to mobile phones or PDAs.
Wireless network/Bluetooth 109
Sending photos via Bluetooth
After sending is complete, select “ Yes.
tꢀ The camera and the device are disconnected and the
7
Bluetooth feature turns off.
tꢀ The camera may not search for a specific Bluetooth-enabled device
and send a photo to it depending on the device type.
tꢀ If the other device does not have enough memory, the photo may not
be transferred. Delete some photos to free up some memory and try
sending again.
tꢀ You cannot connect to several Bluetooth-enabled devices at one time.
tꢀ Place the camera and the Bluetooth-enabled device reasonably close
to one another.
tꢀ The camera may cause interference with other devices that use or
produce radio waves.
tꢀ When there are no photos in the camera memory, you cannot use
this feature.
tꢀ You can send photos only to Bluetooth-enabled phones or PDAs that
support the Object Push Profile (OPP).
tꢀ Some phones or PDAs may not display photos you sent via Bluetooth.
Wireless network/Bluetooth 110
Settings menu
Learn about various options to configure your camera's settings.
Select an option and save your settings.
Accessing the settings menu
3
4
In Shooting or Playback mode, select
Select a menu.
M.
Off
Volume
1
2
Low
Beep Sound
Shutter Sound
Start Sound
AF Sound
Medium
High
Volume
: Medium
: On
Beep Sound
Shutter Sound
Start Sound
AF Sound
: 1
1/2
: Off
: On
Select
to return to the previous screen.
1/2
Icon
Description
Sound settings: Set various camera sounds and
volume. (p. 113)
Display settings: Customize the display settings,
such as brightness. (p. 113)
Camera settings: Change the settings for the camera
system, such as memory format, default file name, and
USB mode. (p. 114)
Appendixes 112
Settings menu
Sound settings
Display settings
* Default
* Default
Item
Description
Item
Description
Display a brief description of an option or menu.
(Off, On*)
Adjust the volume of any sound.
(Off, Low, Medium*, High)
Function
Description
Volume
Select a sound to be emitted when touching on
the screen or switching modes. (Off, On*)
Set a start image to display when the camera turns
on.
tꢀ Off*: Display no start image.
Beep Sound
Shutter Sound
Start Sound
AF Sound
Select a sound to be emitted when pressing the
shutter button. (Off, 1*, 2, 3)
tꢀ Logo: Display a default image stored in the internal
memory.
Select a sound to be emitted when turning on your
camera. (Off*, 1, 2, 3)
Start Image
tꢀ User Image: Display the image you want. (p. 78)
tꢀ Only one start image will be saved in the internal
memory.
tꢀ If you select a new photo as a start image or reset
your camera, the current image will be deleted.
Set a sound to be emitted when half-pressing the
shutter button. (Off, On*)
Set to emit a sound when the camera detects
your face. (Off, On*)
Self-Portrait
Select a type of the grid lines that help you to
compose a scene. (2 X 2*, 3 X 3, +, X)
Grid Line
Adjust the brightness of the screen.
(Auto*, Dark, Normal, Bright)
Display
Brightness
Normal is fixed in Playback mode even if Auto is selected.
Appendixes 113
Settings menu
* Default
* Default
Item
Description
Item
Description
Set the duration for reviewing a captured image
before returning to Shooting mode.
(Off, 0.5 sec*, 1 sec, 3 sec)
Language
Select a language for the display text.
Set the date and time and select a date format.
(Off*, yyyy/mm/dd, mm/dd/yyyy, dd/mm/yyyy)
Quick View
Date & Time
Time Zone
If you perform no operations for 30 seconds, the
camera automatically switches to Power save mode
(press any button to deactivate the Power save
mode). (Off*, On)
Select a region and set the daylight-saving time
(DST).
Power Save
Specify how to name files.
tꢀ Reset: Set the file number to start from 0001 when
inserting a new memory card, formatting a memory
card, or deleting all files.
tꢀ Series*: Set the file number to follow the previous
file number when inserting a new memory card,
formatting a memory card, or deleting all files.
Camera settings
tꢀ The default name of the first folder is 100PHOTO and
the default name of the first file is SAM_0001.
tꢀ The file number increases one by one from
SAM_0001 to SAM_9999.
tꢀ The folder number increases one by one from
100PHOTO to 999PHOTO.
* Default
Item
Description
File No.
Format the internal memory and the memory card
(all files-including the protected files-will be deleted).
(No, Yes)
tꢀ The maximum number of files that can be stored in
one folder is 9999.
tꢀ The camera defines file names according to the
Digital rule for Camera File system (DCF) standard.
If you change the names of files intentionally, the
camera may not play back the files.
Format
If you use a memory card used with cameras from different
manufacturers or a memory card reader, or one formatted
on a computer, your camera may read the card incorrectly.
Format the card before using it.
Reset menus and shooting options (date and time,
language, and video output settings will not be reset).
(No, Yes)
Reset
Appendixes 114
Settings menu
* Default
* Default
Item
Description
Item
Description
Set whether to display the date and time on your
photos when printing. (Off*, Date, Date & Time)
Select the resolution of photos when playing back
files on an HDTV with the HDMI cable.
(NTSC: 1080i*, 720p, 480p/
tꢀ The date and time will be displayed on the bottom-
right corner of the photo in yellow.
PAL: 1080i*, 720p, 576p)
Imprint
tꢀ The date and time may not be printed on some
printer models.
tꢀ If the HDTV does not support the selected
resolution, the HDTV automatically selects the
next lower resolution.
HDMI Size
tꢀ If you select Text in the
s
mode, the date and
time will not be displayed.
tꢀ If you select 480p or 576p, the playback menus
and Smart Album will not be available when
connected to a TV.
Set the camera to automatically turn off when you are
not using it. (Off, 1 min, 3 min*, 5 min, 10 min)
Set the video signal output according to your region.
tꢀ NTSC*: USA, Canada, Japan, Korea, Taiwan,
Mexico
tꢀ Your settings will not change after replacing the
battery.
tꢀ The camera will not automatically turn off when:
Auto Power
Off
-
-
-
it is connected to a computer or printer
you are playing a slide show or videos
you are recording a voice memo
tꢀ PAL (supports only BDGHI): Australia, Austria,
Belgium, China, Denmark, England, Finland,
Germany, Italy, Kuwait, Malaysia, Netherlands,
New Zealand, Norway, Singapore, Spain, Sweden,
Switzerland, Thailand
Video Out
Set an assistant light to help you focus in dark places.
(Off, On*)
AF Lamp
Set to control the camera connected to a Samsung
HDTV that supports Anynet+(CEC) with the TV remote
control.
tꢀ Off*: View files without using an HDTV remote
control.
Anynet+
(HDMI-CEC)
tꢀ On: Control the camera with an HDTV remote
control.
Appendixes 115
Settings menu
* Default
Item
Description
Set the function to use via a USB connection with a
computer or printer.
tꢀ Computer*: Connect your camera to a computer
for transferring files.
USB
tꢀ Printer: Connect your camera to a printer for
printing files.
tꢀ Select Mode: Select a USB mode when you
connect your camera to another device.
Set Intelli-studio to start automatically when you
connect your camera to your computer. (Off, On*)
PC Software
Calibration
Calibrate the screen so that your camera will properly
recognize the input.
Appendixes 116
Error messages
When the following error messages appear, try these remedies.
Error message
Card Error
Suggested remedies
Error message
Low Battery
Suggested remedies
tꢀ Turn off your camera and then turn it on again.
tꢀ Remove your memory card and insert it again.
tꢀ Format your memory card. (p. 114)
Insert a charged battery or recharge the battery.
Delete unnecessary files or insert a new memory
card.
Memory Full
Card not
supported.
The inserted memory card is not available with
your camera. Insert a microSDTM memory card.
Take photos or insert a memory card that has
some photos.
No Image File
tꢀ The camera cannot connect to the network
using the selected access point. Select
another and try again.
Photo reception
failed.
The camera fails to receive a photo from the
sending camera. Try sending again.
The camera fails to send a photo. Try sending
again.
Connection failed.
Transfer failed.
tꢀ The camera fails to connect to another
Bluetooth-enabled device or a camera of the
same model. Try connecting again.
File names do not match the DCF standard.
Transfer the files on the memory card to your
computer and format the card. (p. 114)
DCF Full Error
Device
disconnected.
Connect to a device again.
Delete the damaged file or contact a service
center.
File Error
Turn on DLNA-authorised devices on the
network.
Initialization failed.
The password for transferring files to another
Bluetooth-enabled device or a camera of
the same model is wrong. Enter the correct
password again.
Invalid password.
Appendixes 117
Camera maintenance
Camera body
Cleaning your camera
Wipe gently with a soft, dry cloth.
Camera lens and touch screen
Use a blower brush to remove dust and wipe the lens gently with
a soft cloth. If any dust remains, apply lens cleaning liquid to a
piece of cleaning paper and wipe gently.
tꢀ Never use benzene, thinners, or alcohol to clean the device. These
solutions can damage the camera or cause it to malfunction.
tꢀ Do not press on the lens cover or use a blower brush on the lens
cover.
Appendixes 118
Camera maintenance
Memory card capacity
About memory cards
The memory capacity may differ depending on shooting scenes
or shooting conditions. These capacities are based on a 1 GB
microSDTM card:
Memory cards you can use
You can use microSDTM (Secure Digital) memory cards.
Size
Super Fine Fine Normal 60 FPS 30 FPS 15 FPS
122
142
160
206
211
335
510
762
1,626
240
278
312
401
409
637
936
353
409
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
454
P
h
o
t
588
594
o
s
908
1,314
1,373 1,931
2,575 3,090
Approx. Approx.
13' 30" 23' 36"
Approx. Approx.
15' 20" 32' 33"
Approx. Approx.
37' 50" 67' 30"
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
*
V
i
d
e
o
s
Approx. Approx. Approx.
79' 13" 138' 19" 237' 41"
Approx.
-
-
138’ 19”
* The recordable time may vary if you use the zoom.
Several videos were recorded in succession to determine the total
recording time.
Appendixes 119
Camera maintenance
Battery life
About the battery
Use only Samsung-approved batteries.
Average time /
Test conditions
Number of photos
(when the battery is fully charged)
Battery specifications
This is measured under the following
conditions: in the
resolution, Fine quality, OIS on.
a
mode, 14M
Mode
SLB-11A
Type
Lithium-ion battery
1130 mAh
3.8 V
1. Set the flash option to Fill in, take a
single shot, and zoom in or out.
Cell capacity
Voltage
Approx. 120 min/
Approx. 240
photos
Photos
2. Set the flash option to Off, take a
single shot, and zoom in or out.
Charging time
(when the camera is switched off)
Approx. 190 min
3. Perform steps 1 and 2 for 30
seconds and repeat for 5 minutes.
Then turn off the camera for 1 minute.
4. Repeat steps 1 to 3.
Record videos at 1280 X 720 HQ
resolution and 30 fps.
Videos
Approx. 80 min
tꢀ The figures above are measured by Samsung’s standards and may differ
depending on actual usage.
tꢀ Several videos were recorded in succession to determine the total recording
time.
Appendixes 120
Camera maintenance
Notes about charging the battery
Notes about charging with a computer connected
tꢀ If the indicator light is off, make sure that the battery is inserted
tꢀ Use only the provided USB cable.
correctly.
tꢀ The battery may not be charged when:
tꢀ Turn off your camera when charging.
- you use a USB hub
tꢀ Turn on your camera after charging the battery for more than 10
minutes.
- other USB devices are connected to your computer
- you connect the cable to the port on the front side of your
computer
tꢀ Using the flash or recording videos depletes the battery quickly.
- the USB port of your computer does not support the power output
standard (5 V, 500 mA)
Charge the battery until the indicator light turns green.
tꢀ If the indicator light blinks in orange or does not illuminate, reconnect
the cable, or remove the battery and insert it again.
tꢀ If you charge the battery when the cable is overheated or the
temperature is too high, the indicator light may turn orange. Charging
will start when the battery cools down.
Appendixes 121
Camera maintenance
Personal injury or death can occur if the battery is
tꢀ Do not disassemble or puncture the battery with any
handled carelessly or improperly. For your safety,
follow these instructions for proper battery handling:
tꢀ The battery can ignite or explode if not handled properly. If
you notice any deformities, cracks, or other abnormalities
in the battery, immediately discontinue use of the battery
and contact your manufacturer.
sharp object.
tꢀ Avoid exposing the battery to high pressure or crushing
forces.
tꢀ Avoid exposing the battery to major impacts, such as
dropping it from high places.
tꢀ Do not expose the battery to temperatures of 60° C
(140° F) or above.
tꢀ Use only authentic, manufacturer-recommend battery
chargers and adapters and charge the battery only by the
method described in this user manual.
tꢀ Do not allow the battery to come in contact with moisture
or liquids.
tꢀ Do not place the battery near heating devices or expose
to excessively warm environments, such as the inside of
an enclosed car in the summertime.
tꢀ Battery shall not be exposed to excessive heat such as
sunshine, fire or the like.
tꢀ Do not place the battery in a microwave oven.
Disposal guidelines
tꢀ Dispose of the battery with care.
tꢀ Avoid storing or using the battery in hot, humid places,
such as spas or shower enclosures.
tꢀ Do not dispose of the battery in a fire.
tꢀ Do not rest the device on flammable surfaces, such as
bedding, carpets, or electric blankets for a prolonged
period.
tꢀ Disposal regulations may differ by country or region.
Dispose of the battery in accordance with all local and
federal regulations.
tꢀ When the device is switched on, do not leave it in any
confined space for a prolonged period.
Guidelines for charging the battery
Charge the battery only by the method described in this user
manual. The battery can ignite or explode if not charged
properly.
tꢀ Do not allow battery terminals to come in contact with
metallic objects, such as necklaces, coins, keys, or
watches.
tꢀ Use only authentic, manufacturer-recommended, Lithium-
ion replacement batteries.
Appendixes 122
Before contacting a service center
If you are having trouble with your camera, try these troubleshooting procedures before contacting a service center. If you have attempted
the troubleshooting solution and are still having problems with your device, contact your local dealer or service center.
Suggested remedies
Suggested remedies
Situation
Situation
tꢀ There is no space on the memory card.
Delete unnecessary files or insert a new
card.
tꢀ Make sure that the battery is inserted.
Cannot turn on the
camera
tꢀ Make sure that the battery is inserted
correctly.
tꢀ Format the memory card. (p. 114)
tꢀ Charge the battery.
tꢀ The memory card is defective. Get a
new memory card.
tꢀ Charge the battery.
Cannot take photos
tꢀ Your camera may be in Power save
mode. (p. 114)
tꢀ Make sure that the camera is switched
on.
The power turns off
suddenly
tꢀ The camera may turn off to prevent the
memory card from being damaged due
to an impact. Turn on your camera again.
tꢀ Charge the battery.
tꢀ Make sure that the battery is inserted
correctly.
tꢀ The battery may lose power more quickly
in low temperatures (below 0° C). Keep
the battery warm by putting it into your
pocket.
The camera freezes
Remove the battery and insert it again.
tꢀ The flash option may be set to Off.
(p. 47)
The flash does not work
The camera is losing
battery power quickly
tꢀ Using the flash or recording videos
depletes the battery quickly. Recharge
if needed.
tꢀ You cannot use the flash in the
, or some modes.
d,
v,
D
s
The flash fires
unexpectedly
The flash may fire due to static electricity.
This is not a malfunction of the camera.
tꢀ Batteries are consumable parts that must
be replaced over time. Get a new battery
if the battery life is diminishing quickly.
The date and time are
incorrect
Set the date and time in the display settings
menu. (p. 114)
The touch screen or
buttons do not work
Remove the battery and insert it again.
Appendixes 123
Before contacting a service center
Suggested remedies
Suggested remedies
Situation
Situation
If you use your camera at very low
temperatures, it may cause the camera
screen to malfunction or discolor.
For better performance of your camera
screen, use your camera in moderate
temperatures.
tꢀ Turn off the flash. (p. 47)
The photo is too bright
tꢀ Your photo is overexposed. Adjust the
exposure value. (p. 57)
The camera screen
works poorly
Your photo is underexposed.
tꢀ Turn on the flash. (p. 47)
The photo is too dark
tꢀ Adjust the ISO speed. (p. 48)
The memory card has
an error
The memory card has not been reset.
Format the card. (p. 114)
tꢀ Adjust the exposure value. (p. 57)
tꢀ Make sure that the camera is correctly
connected to the external monitor with
the A/V cable.
If you change the name of a file, your
camera may not play the file (the name of
the file should meet the DCF standard). If
you encounter this situation, play back files
on your computer.
The TV does not
display your photos
Cannot play back files
tꢀ Make sure that your memory card
contains photos.
tꢀ Make sure that the USB cable is
connected correctly.
tꢀ Make sure that the focus option you set
is suitable for close-up shots. (p. 49)
Your computer does
not recognize your
camera
tꢀ Make sure that your camera is switched
on.
tꢀ Make sure that the lens is clean. If not,
clean the lens. (p. 118)
The photo is blurry
tꢀ Make sure that you are using a
supported operating system.
tꢀ Make sure that the subject is within
range of the flash. (p. 126)
The file transmission may be interrupted by
static electricity. Disconnect the USB cable
and connect it again.
Your computer
disconnects the camera
while transferring files
An incorrect white balance can create
unrealistic color. Select the proper white
balance option to suit the light source.
(p. 60)
The colors in the photo
do not match the actual
scene
Appendixes 124
Before contacting a service center
Suggested remedies
Situation
tꢀ You can play videos only with the Intelli-
studio program. Install the program on
your computer. (p. 88)
Your camera cannot
play videos
tꢀ Make sure that the USB cable is
connected correctly.
tꢀ End Intelli-studio and restart the program.
tꢀ You cannot use Intelli-studio on
Macintosh computers.
tꢀ Make sure that the PC Software is set
to On in the settings menu. (p. 116)
Intelli-studio is not
functioning properly
tꢀ Depending on your computer's
specification and environments, the
program may not launch automatically.
In this case, click Start “ My
Computer “ Intelli-studio “
iStudio.exe on your computer.
Appendixes 125
Camera specifications
Image sensor
Shutter speed
tꢀ Auto: 1/8 - 1/2,000 sec.
tꢀ Program: 1 - 1/2,000 sec.
tꢀ Night: 8 - 1/2,000 sec.
tꢀ Fireworks: 2 sec.
Type
1/2.3" (Approx. 7.76 mm) CCD
Approx. 14.2 mega-pixels
Approx. 14.5 mega-pixels
Effective pixels
Total pixels
Lens
Exposure
Schneider-KREUZNACH lens
f = 5.6 - 39.2 mm
(35 mm film equivalent: 31 - 217 mm)
Control
Program AE
Focal length
Metering
Compensation
ISO equivalent
Flash
Multi, Spot, Center-weighted
2EV (1/3EV steps)
F-stop range
Digital zoom
F3.3 (W) - F5.5 (T)
tꢀ Still image mode: 1.0X - 7.0X
tꢀ Play mode: 1.0X - 13.5X (depending on image size)
Auto, 80, 100, 200, 400, 800, 1600, 3200
Display
Type
Mode
Off, Auto, Red-eye, Fill in, Slow Sync, Red-eye Fix
WVGA AMOLED
tꢀ Wide: 0.3 m - 3.2 m (ISO Auto)
tꢀ Tele: 0.5 m - 1.9 m (ISO Auto)
Range
Feature
Focusing
3.7" (9.4 cm) Wide Full Touch Screen Panel
Recharging time
Approx. 4 sec.
TTL auto focus (Multi AF, Center AF, Face Recognition
AF, Face Detection AF, Smart Touch AF, One Touch
Shooting)
Shake reduction
Type
DUAL IS [Optical Image Stabilization (OIS) +
Digital Image Stabilization (DIS)]
Wide (W)
Tele (T)
Normal
Macro
80 cm - infinity
5 cm - 80 cm
5 cm - infinity
150 cm - infinity
70 cm - 150 cm
70 cm - infinity
Range
Auto Macro
Appendixes 126
Camera specifications
tꢀ Modes: Smart Scene Detection (Landscape,
Blue Sky, Natural Green, Sunset Sky), Movie
Effect
tꢀ Photo Style Selector: Normal, Soft, Vivid, Forest,
Retro, Cool, Calm, Classic, Negative, Sketch,
tꢀ Format: H.264 (Max recording time: 20 min)
tꢀ Size: 1280 X 720 HQ (30 FPS, 15 FPS),
1280 X 720 (30 FPS, 15 FPS), 640 X 480 (30 FPS,
15 FPS), 320 X 240 (60 FPS, 30 FPS, 15 FPS),
320 X 240 For Sharing (30 FPS)
Defog, Custom RGB
Shooting mode
tꢀ Smart Filter: Normal, Miniature, Vignetting,
Fish-eye 1, Fish-eye 2
Videos
tꢀ Image Adjust: Sharpness, Contrast, Saturation
tꢀ Frame Rate: 60 FPS, 30 FPS, 15 FPS
tꢀ Effect: Photo Style Selector, White Balance,
White Balance
Auto WB, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten,
Custom Set
Smart Filter
tꢀ Voice: Off, On, Zoom Mute
Date Imprinting
Date & Time, Date, Off
Shooting
tꢀ Video editing (embedded): Pause during recording,
Still image capture, Time trimming
Playback
Single image, Thumbnails, Multi slide show with music
and effects, Movie clip, Smart Album*
* Smart Album category: Type, Date, Color, Week,
Face, Favorite
tꢀ Modes: Smart Auto (Portrait, Night Portrait,
Backlight Portrait, Backlight, Landscape, White,
Motion, Tripod, Night, Macro, Macro Text, Blue Sky,
Sunset Sky, Natural Green, Natural Portrait, Macro
Color, Fireworks), Auto, Program, DUAL IS, Scene
Type
Resize, Rotate, Photo Style Selector, Image Adjust,
Smart Filter, Special Effect, Face Effect
Edit
Photos
(Night, Portrait, Children, Landscape, Text,
Close Up, Sunset, Dawn, Backlight, Fireworks,
Beach & Snow, Frame Guide, Beauty Shot)
tꢀ Drive: Single, Continuous, Motion Capture, AEB
tꢀ Timer: 10 Sec, 2 Sec, Double, Motion Timer
Appendixes 127
Camera specifications
For 1GB microSDTM
tꢀ Photo Style Selector: Normal, Soft, Vivid, Forest,
Retro, Cool, Calm, Classic, Negative, Sketch,
Defog, Custom RGB
Super Fine
122
Fine
240
Normal
353
4320 X 3240
4000 X 3000
3984 X 2656
3840 X 2160
3264 X 2448
2560 X 1920
2048 X 1536
1920 X 1080
1024 X 768
tꢀ Image Adjust: ACB, Brightness, Contrast,
Saturation
142
278
409
Effect
160
312
454
tꢀ Smart Filter: Normal, Miniature, Vignetting,
Fish-eye 1, Fish-eye 2
206
401
588
tꢀ Special Effect: Color Filter, Elegant, Add Noise
tꢀ Face Effect: Face Retouch, Red-eye Fix
211
409
594
Image size
335
637
908
Voice recording
510
936
1,314
1,931
3,090
762
1,373
2,575
tꢀ Voice Recording (Max. 10 hours)
tꢀ Voice Memo in a photo (Max. 10 sec.)
1,626
Storage
These figures are measured under Samsung’s
standard conditions and may vary depending on
shooting conditions and camera settings.
tꢀ Internal memory: Approx. 13 MB
tꢀ External memory (Optional): microSDTM card (up to
4 GB guaranteed)
Wireless network
Wi-Fi
Media
Internal memory capacity may not match these
specifications.
IEEE 802.11 b/g
Version: 1.5
DLNA
tꢀ Photo: JPEG (DCF), EXIF 2.21, DPOF 1.1,
PictBridge 1.0
tꢀ Version: 2.0
tꢀ QD ID: B016336
Bluetooth
File format
tꢀ Video: H.264 (MPEG-4.AVC)
tꢀ Audio: WAV
Appendixes 128
Camera specifications
Interface
Digital output
connector
USB 2.0
Audio output
Mono (Internal speaker), Stereo (Microphone)
tꢀ A/V: NTSC, PAL (selectable)
tꢀ HDMI 1.4: NTSC, PAL (selectable)
Video output
DC power input
connector
20 pin, 4.4V
Power source
Rechargeable
battery
Lithium-ion battery (SLB-11A, 1130 mAh)
The power source may differ depending on your region.
Dimensions (W x H x D)
103.8 x 58.3 x 19.6 mm
Weight
161.1 g (without battery and memory card)
Operating temperature
0 - 40˚ C
Operating humidity
5 - 85 %
Software
Intelli-studio
Specifications are subject to change without prior notice.
Appendixes 129
FCC notice
tꢀ Declaration of Conformity
FCC ID:A3LCL80
Trade Name
Model No.
: Samsung Electronics America, Inc.
Caution:
: Samsung CL80
Any changes or modifications in construction of this device which are not
expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
Responsible Party
Address
: Samsung Electronics America, Inc.
: 105 Challenger Road Ridgefield Park NJ
: 1-800-SAMSUNG (726-7864)
NOTE:
Telephone No.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
- Reorientate, or relocate, the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
Samsung Eco-mark
It is Samsung’s own symbol mark is used to
effectively communicate Samsung’s environmental
friendly product activities to the consumers. The
mark represents Samsung’s continuous effort on
development of environmental conscious products.
RF exposure statements:
This device is for handheld operation only. The antenna(s) used for this
transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or
operating in conjunction with any other antenna or
transmitter.
Appendixes 130
Index
Smart Scene Detection
R
Settings
Viewing files
Recording
Special effects
Red-eye
Shooting mode
Voice memo
T
Resolution
W
Website
RGB tone
Transferring files
for Windows 86
Smart face recognition 54
V
Smart filter effect
Z
S
Video
Appendixes 133
Please refer to the warranty that came with your product or
service or inquiries.
|
