READ ME FIRST!
For the best user experience, it is highly recommended to update the software for the RCA Small Wonder
Camcorder and RCA Memory Manager. To do this, please follow these important steps BEFORE you use
this product:
Open your web browser and enter the following text into the address bar:
When the webpage opens, click the link “Download RCA Memory Manager” and select “Run” when this
option appears. Note: You may have to disable your pop up blockers to allow this download.
Step 1. Follow the prompts to complete the setup of the RCA Memory Manager software. You will be
asked to connect the camcorder to your PC using the provided USB cable. At the end of the installation,
please check “Launch RCA Memory Manager.”
Step 2. At this point, Memory Manager will launch. A “Register Your Player” box will also pop up. You
may select “Accept”, which will open a new webpage window (this window can be closed after you
complete the registration).
Step 3. RCA Memory Manager software may then detect that the camcorder requires a firmware update
and may display a “New Software Version Available” box. Follow the prompts to complete the installation
of the camcorder firmware.
You will be prompted automatically for any future updates. To use your Small Wonder with other PC’s,
please use the above web address to install the latest RCA Memory Manager software.
MicroSD card info:
For your convenience, the 2GB microSD card has already been installed in the camcorder. The microSD
slot is inside the battery door.
RCA’s customer support line is available at (800) 290-6650.
EZ217 EN v1.0
|