v2.0 (EN)(US/MEX)
•
•
In the case of low battery, a low battery icon (
batteries when battery icon is flashing.
Alkaline batteries are recommended for best results under normal use.
) will flash on the screen. Please change
Play
Microphone
Video quality selector
HQ: High Quality mode
webQ: Web quality mode
Using your camcorder
Playback from recording mode:
1. Press PLAY/PAUSE once to start playback of the most recent video.
2. Press and hold PLAY/PAUSE for three seconds to play all videos, starting from the first one
in the memory card.
QuickStartGuide
EZ207 RCA Small Wonder Camcorder
Turn on/off
LCD screen
•
•
The selected setting (HQ or webQ) appears on the display screen during recording.
The HQ setting is recommended when planning to view video on a TV directly from the
camcorder.
•
–
Press and hold ON/OFF to turn on or off.
For self recordings, the LCD
screen can be rotated 180o.
Camcorder will automatically turn off after 2 minutes if not in use.
Inserting microSD memory card
•
•
If no video is selected after playback has finished, recording mode will resume after 5 seconds.
A microSD memory card (not supplied) is recommended for recording. It is installed
between the batteries in the front compartment.
The camcorder internal memory will only permit minutes of recording time, whereas the memory card may provide many hours
of recording.
Congratulations on purchasing your new RCA Small Wonder Camcorder.
Please read these instructions for quick tips on using the product.
Record
Approx. recording duration*
Playback from video preview mode (press or once from recording mode):
1. Press and release or to cue the previous or next video.
2. Press PLAY/PAUSE once to start playback of the current video.
3. Press and hold PLAY/PAUSE for three seconds to play all remaining videos, starting from
the current one in the memory card.
–
Recording indicator
Lens
Press and release the red RECORD button (after
“READY”appears on the screen) to begin recording.
Settings
Resolutions
2 GB
8 GB
–
Refer to “Battery installation” for more information on opening the front compartment.
HQ (High Quality mode)
640 x 480 pixel
448 x 336 pixel
1 hour
2 hours
4 hours
8 hours
•
To insert card, align card with Card Symbol on camcorder and slide in until a click is heard.
The card icon ( ) appears on the screen with memory card inserted.
Tips: Inserting a memory card while the camcorder is turned on lets you copy videos from the camcorder internal memory to the
memory card by pressing the + button. Please follow the instructions on the screen for operation.
While recording:
Getting started
webQ (Web Quality mode)
•
A red and the elapsed time appears at the top
left corner of the screen.
–
Content of the box
•
If no video is selected after playback has finished, recording mode will resume after 5 seconds.
* Recording duration is based on specified microSD card capacities. Actual recording capacity depends on type of video content
being recorded.
•
•
•
•
EZ207 SmallWonder Camcorder
AV cable
USB cable
•
•
•
Wrist strap
Quick Start Guide
Owner Registration card
•
To remove card, push card in until a click is heard and the card will pop out slightly, then
remove the card.
The camcorder supports a memory card capacity of 8 GB or less.
•
The red recording light on the camcorder front
turns on.
Other playback controls:
•
•
Hold down or to fast rewind or fast forward the selected video during playback.
Press PLAY/PAUSE to pause playback (a pause indicator II and the remaining playback
time flash at the top left corner of the screen). Press the button again to resume playback.
•
2 x AA Batteries
Pausing a recording:
microSD card
•
•
Press PLAY/PAUSE.
Camcorder strap hole
Battery installation
1. Push (to the right) and hold the front cover lock.
2. Slide the front cover down and then lift up to open.
A pause indicator II replaces the red at the top
left corner and “Recording Paused” flashes in the
middle of the screen.
Delete
1. Press DELETE and the last recording and “DELETE VIDEO ?” appear on the screen.
Front cover
•
To select another video, press and release or
.
3. Replace or install 2 AA batteries. Make sure you align the battery polarities as indicated.
4. Replace the front cover and slide up to lock.
•
To resume recording, press and release PLAY/
PAUSE again.
Refer to Battery installation for
more information.
2. Press and hold DELETE until the selected video is deleted.
Front cover lock Tripod screw mount
USB cover
3. To delete all videos, press & hold DELETE for 3 seconds and then repeat step 2.
•
You may also need to insert a microSD memory card before replacing the front cover. Refer to “Inserting microSD memory card”
for more information.
Front compartment
Stop
Take photo
Setting date and time
While playing or recording, press and release the red
RECORD button to stop the playing or recording.
3
•
Press and release WEB PHOTO to take photo (photo resolution: 1280 x 960 pixel).
AV output
You might be prompted to set the date and time after battery replacement or for the first time
you turned on the camcorder. Date and time setting can also be accessed anytime by pressing
and holding PLAY/PAUSE and ON/OFF together while the camcorder is turned off.
1. Press or to shift among month, date, hour and minute and press + or – to set the
date/time values.
2. Press or to select DONE and then press the red RECORD button to save settings. Or
press DELETE to exit without saving.
Audio/Video output for connecting to TV or other
AV equipment with the included AV cable.
4
2
Zoom
Volume
During playback:
•
Refer to “Viewing videos on TV” and “Recording videos to VHS
tape or DVD” overleaf for more information.
Audio speaker
1
Before or during recording:
•
•
Press + to zoom in.
Press – to zoom out.
•
•
Press + to increase volume.
Press – to decrease volume.
|