QSG_VOIP080_GBIE.qxd 20.06.2006 19:43 Seite 1
Install
Enjoy
What’s in the box
1
3
Once the drivers and software installed !
A
USB cable
A
Set up for the first time
O
O
Make sure the phone is connected to
Note : Please make sure the USB
connector is NOT plugged in
before installation starts.
a USB slot directly on your computer.
Start theVOIP080 driver by double
clicking the shortcut icon created on
your desktop, if the driver is not
running.
O
Unwind the USB cable from your
phone.
O
If this is the first time you run the
VOIP080 driver, you will see the
message Another program wants
to use Skype. Select Allow this
program to use Skype and click
OK.
Install the software
B
O
Insert the installation CD into the
PC’s CD ROM (or DVDROM)
drive.
Note : If you don't have a Skype
Installation CDROM
VOIP080 Phone
Cradle
account, you can find more details
about how to create one on
O
O
The installation program will start
automatically.
Follow instructions on the screen.
Features during a Call
B
O
Adjust EarpieceVolume
Connect
Press
Press
to increase the volume.
to decrease the volume.
2
Quick start guide
Carry case
Connect USB plug
O
Mute Microphone
What else will you need
O
Connect the USB plug directly to
your PC’s USB slot.
Press
Press
to mute the microphone. LED will flash slowly.
again to restore communication.
Internet connection (broadband
recommended)
Go on following instructions on
the screen.
Note : The microphone volume and the earpiece volume can also be
adjusted through theVOIP080 driver. For more information, see detailed
user manual available on theVOIP080 CDROM.
- Windows XP or Windows 2000
- CDROM or DVDROM drive
C
Finish installation
Use the Skype version provided on the
installation CD for the phone to work
properly. New features from upgraded
Skype version may not work with
VOIP080, check compatibility on
O
Click on Quit.
Remove the installation CD from
the PC’s CDROM drive.
A desktop or a laptop with free
USB port
O
|