Register your product and get support at
Registre su producto y obtenga asistencia en
Cadastre seu produto e obtenha suporte em
CMD310
EN
User manual
3
ES-AR Manual del usuario
29
PT-BR Manual do Usuário 61
LEA CUIDADOSAMENTE ESTE INSTRUCTIVO ANTES DE USAR SU APARATO
•
•
Risk of firing or damage to the car audio
system: Do not place any other object into
the compartment for dock bracket.
Risk of damage to your iPhone or iPod
touch: Unload your iPhone or iPod touch
from the dock before you store the dock
bracket.
1 Important
Safety
Read and understand all instructions before you
use the device. If damage is caused by failure to
follow instructions, the warranty does not apply.
Notice
•
Use of controls or adjustments or
performance of procedures other than
herein may result in hazardous radiation
exposure or other unsafe operation.
The device is designed for negative ground
(earth) 12V DC operation only.
To reduce the risk of traffic accidents, do
not pick up or make a phone call, nor
watch video when driving.
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
•
•
Compliance
•
•
To ensure safe driving, adjust the volume to
a safe and comfortable level.
Improper fuses can cause damage or
fire.When you need to change the fuse,
consult a professional.
This product complies with the radio
interference requirements of the European
Community.
•
•
Use only the supplied mounting hardware
for a safe and secure installation.
To avoid short circuits, do not expose the
device, remote control or remote control
batteries to rain or water.
Care of the environment
•
•
The device shall not be exposed to
dripping or splashing.
Do not place any sources of danger on
the device (e.g. liquid filled objects, lighted
candles).
Never insert objects into the ventilation
slots or other openings on the device.
Clean the device with soft, damp cloth.
Never use substances such as alcohol,
chemicals or household cleaners on the
device.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products and batteries.
The correct disposal of these products helps
prevent potentially negative consequences on
the environment and human health.
•
•
•
•
The dock is designed for iPhone and iPod
touch only. Do not connect any other
device to it.
Risk of damage to the dock bracket: Do
not place or hang any object on it.
Your product contains batteries, which cannot
be disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries.The correct
disposal of batteries helps prevent potentially
4
EN
negative consequences on the environment and
human health.
Other trademarks and trade names are those
of their respective owners.
additional information on a recycling center in
your area.
Copyright
Environmental information
2013 © Koninklijke Philips Electronics N.V.
Specifications are subject to change without
notice.Trademarks are the property of
Koninklijke Philips Electronics N.V or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
Trademark notice
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Philips is
under license.
Windows Media and the Windows logo
are trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
“Made for iPod” and “Made for iPhone”
mean that an electronic accessory has been
designed to connect specifically to iPod or
iPhone respectively, and has been certified by
the developer to meet Apple performance
standards.Apple is not responsible for the
operation of this device or its compliance with
safety and regulatory standards. Please note that
the use of this accessory with iPod or iPhone
may affect wireless performance.
iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries.
EN
5
2 Your car audio
system
What's in the box
Check and identify the contents of the package:
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers, register your product
a
c
b
Introduction
d
With this system, you can:
•
enjoy audio from USB storage devices,
iPhone, iPod touch, and other external
devices,
•
•
•
listen to radio stations,
charge your iPhone or iPod touch, and
make phone calls.
e
g
f
h
You can enrich sound output with these sound
effects:
•
•
Dynamic bass boost (DBB)
Automatic loudness control
Playable media:
• USB storage device
Quick start guide
•
•
Compatibility: USB 2.0, USB 1.1
Class support: MSC (Mass Storage
Class)
File system: FAT16, FAT32
Files: .mp3, .wma
Maximum number of albums/folders:
99
Maximum number of tracks/files: 999
Maximum level of directory: 8
a Main unit and front panel (with a sleeve)
b Trim plate
•
•
•
c ISO standard connector
d Rubber cushion
•
•
e 1 x Screw
•
iPhone and iPod models
f 2 x Disassembly tools
g User manual
•
•
•
•
•
iPhone 4S
iPhone 4
iPhone 3GS
iPhone 3G
h Quick start guide
iPod touch (3rd and 4th generations)
6
EN
Overview of the system
u t sr
q
p
o n
a
b
c
d
e
f
j k
l
m
g h i
f
a
b
•
•
In radio mode, press to select the
preset radio station of No. 2.
In radio mode, press and hold to store
the current radio station at channel
No. 2.
•
•
Press to answer or redial a call.
Press to hang up a call.
•
•
•
Tune to a radio station.
Press to skip to the previous track.
Press and hold to rewind a track.
•
For .wma/.mp3 tracks, press to select
the previous album or folder.
c
g
h
•
•
Press to enable or disable the full
sound.
Press and hold to access the sound
setting menu.
•
•
Press to enable or disable the
maximum volume.
Press and hold to enable or disable
the DBB (dynamic bass boost) sound
effect.
d
e
•
•
Press repeatedly to select a source.
Press and hold to activate the selection
of listening zones.
•
•
In radio mode, press to select the
preset radio station of No. 3.
In radio mode, press and hold to store
the current radio station at channel
No. 3.
•
•
In radio mode, press to select the
preset radio station of No. 1.
In radio mode, press and hold to store
the current radio station at channel
No. 1.
•
For tracks, press to select a repeat
mode: repeat the current track, or
repeat all tracks in the current album
or folder.
•
For .wma/.mp3 tracks, press to select
the next album/folder.
EN
7
i
s
•
•
In radio mode, press to select the
preset radio station of No. 4.
In radio mode, press and hold to store
the current radio station at channel
No. 4.
•
•
•
•
•
Press to turn on the system.
Press and hold to turn off the system.
Press to mute sound.
Press to confirm an option.
Rotate to switch between menu
options.
•
For tracks, press to start playing all
tracks in the current album or folder
randomly.
•
Rotate to adjust the volume level.
t MIC
j
k
•
Integrated microphone.
•
•
In radio mode, press to select the
preset radio station of No. 5.
In radio mode, press and hold to store
the current radio station at channel
No. 5.
u
•
Press to exit the current menu.
Press repeatedly to select a tuner band.
Press and hold to transfer a call.
•
•
•
•
In radio mode, press to select the
preset radio station of No. 6.
In radio mode, press and hold to store
the current radio station at channel
No. 6.
•
Start, pause, or resume the play of
tracks.
l Dock for iPhone/iPod touch
m MP3-LINK
•
Connect to the audio output socket
(usually the headphone socket) of an
external device.
n USB
•
Connect to a USB storage device.
o RESET
•
Press to reset the system to factory
default settings.
p
•
Press to eject the dock bracket.
q LCD screen
r
•
•
Press once to display the system clock.
Press and hold to access the system
menu.
8
EN
Connect wires
3 Before use
Caution
Caution
• Use the controls only as stated in this user manual.
• Make sure that all loose leads are insulated with
electrical tape.
Always follow the instructions in this chapter in
sequence.
1 Check the car's wiring carefully, and then
If you contact Philips, you will be asked for the
model number and serial number of your car
audio system.The model number and serial
number are on its bottom.Write the numbers
here:
connect them to the supplied ISO wires.
h
Model No.: __________________________
Serial No.: ___________________________
a
b
c
g
Install the car audio system
d
f
e
These instructions are for a typical installation.
However, if your car has different requirements,
make the adjustment accordingly. If you have
any question regarding installation kits, consult
your local retailer.
Connector Connect to
1
2
Yellow
wire
The +12V car battery which is
live at all times
Caution
Blue/White The electric antenna control
wire
• This system is designed for negative ground (earth) 12V
DC operation only.
• Always install this system in the car dashboard. Other
locations can be dangerous as the rear of the system
heats up during use.
lead or power supply lead of
the antenna booster. If there is
no electric antenna or antenna
booster, or it is manually
operated telescopic antenna,
it is unnecessary to connect
this lead.
• To avoid short-circuit: before you connect, make sure
that the ignition is off.
• Make sure that you connect the yellow and red power
supply leads after all other leads are connected.
• Make sure that all loose leads are insulated with
electrical tape.
• Make sure that the leads do not get caught under
screws iron parts that will move (e.g. seat rail).
• Make sure that all ground (earth) leads are run to a
common ground (earth) point.
3
Black wire A metal surface of the car.
Connect the black ground
(earth) lead before connecting
the yellow and red power
supply leads.
• Use only the supplied mounting hardware for a safe
and secure installation.
• Improper fuses can cause damage or fire.When you
need to change the fuse, consult a professional.
• When you connect other devices to this system, make
sure that the rating of the car circuit is higher than the
total fuse value of all the connected devices.
• Never connect speaker wires to the metal body or
chassis of the car.
• Never connect speaker wires with stripes to one another.
EN
9
Connector Connect to
Red wire The +12V power terminal
a
b
4
which is live in the accessory
(ACC) position of the ignition
switch. If there is no accessory
position, connect to the +12V
car battery terminal that is
always live. Make sure that the
black ground (earth) lead is
connected to a metal surface
of the car first.
SUB-W
L
R
REAR LINE OUT
5
6
7
8
Green and Left speaker (rear)
green/black
wires
White and Left speaker (front)
white/black
wires
c
e
f
d
g
h
Gray and
gray/black
wires
Purple
and
Right speaker (front)
Right speaker (rear)
Connector
Connect to
1
2
ANTENNA
External Mic
Antenna for radio
An external
microphone for
phone call
purple/
black
wires
3
4
5
SUBWOOFER
(Socket)
REAR LINE OUT L
(Socket)
REAR LINE OUT R
(Socket)
Subwoofer
2 Connect the other end of the supplied
standard connector to the car audio
system.
Rear left speaker
Rear right speaker
6
7
8
OE REMOTE (Brown) OE remote
FRONT LINE OUT L Front left speaker
FRONT LINE OUT R Front right
speaker
Tip
• The pin arrangement for the ISO connectors depends
on the type of vehicle you drive. Be sure to make
proper connections to prevent damage to the system.
10 EN
Mount into the dashboard
1 If the car does not have an on-board drive
or navigation computer, disconnect the
negative terminal of the car battery.
•
If you disconnect the car battery in
a car that has an on-board drive or
navigation computer, the computer
may lose its memory.
53.5 m m
183 mm
•
If the car battery is not disconnected,
to avoid short-circuit, make sure that
the bare wires do not touch each
other.
2 Make sure that car dashboard opening is
within these measurements:
4 Place the supplied rubber cushion over the
end of the mounting bolt.
5mm
183 mm
53mm
5 Slide the system into the dashboard until
you hear a "click".
3 Install the sleeve into the dashboard and
bend the tabs outward to fix the sleeve.
Note
• If the system is not fixed by sleeve but by the supplied
screws, skip this step.
EN 11
6 Attach the trim plate.
4 Get started
Turn on
Press
.
» [WELCOME] scrolls.
•
To turn off the system, press and hold
until [GOODBYE] is displayed.
7 Reconnect the negative terminal of the car
battery.
Change system settings
1 Press and hold
to access the system
menu.
2 Press repeatedly to select an option.
•
•
•
•
•
•
•
•
•
[STORE >]
[AREA]
[LOCAL]
[CLOCK]
[CLOCK 12H]
[BEEP]
[BKO]
[DIMMER]
[DEMO]
3 Rotate
to select a setting.
•
To exit the setting, press
.
Set the clock
1 Press and hold to access the system menu.
2 Press repeatedly until [CLOCK] and
the current time is displayed.
» If the clock is not set before, [00:00] is
displayed.
3 Rotate
4 Press
5 Rotate
6 Press
to set the hour.
to confirm.
to set the minute.
to confirm.
12 EN
Set the clock format
5 Listen to radio
1 Press and hold
to access the system
menu.
2 Press repeatedly until [CLOCK 12H]or
[CLOCK 24H] is displayed.
Tune to a radio station
3 Rotate
to select a setting.
[CLOCK 12H]: 12-hour time format
•
•
1 Press
repeatedly to switch the source
[CLOCK 24H]: 24-hour time format
to [RADIO].
2 Press repeatedly to select a band:
Display the clock
[FM1], [FM2], [FM3], [AM1], or [AM2].
Press
to display the clock.
3 Press and hold
frequency digits blink.
or repeatedly to tune to a
or
until the
•
To exit, press any button.
4 Press
radio station manually.
Select a source
» The radio station is broadcast.
•
To search for a radio station
automatically, press or
Note
.
• When all other sources are unavailable, the system
switches the source to [RADIO] automatically.
Select a tuner region
You can select a suitable country/region of the
radio.
Press
repeatedly to select a source.
•
•
[RADIO]: FM/AM radio
[MP3-LINK]: the audio input through the
MP3-LINK socket
1 Press and hold
to access the system
menu.
•
•
[BT AUDIO]: the audio transferred from a
Bluetooth device
[USB]:When a USB storage device is
connected and recognized, you can select
this source to play audio files that are
stored on it.
[iPHONE]:When an iPhone or iPod touch
is connected and recognized, you can
select this source to play the playlist of
iPhone or iPod touch.
2 Press repeatedly until [AREA] is
displayed.
3 Rotate
to select:
•
•
•
•
•
•
•
•
[USA] (United States)
[EUR] (Western Europe)
[RUS] (Russia)
•
[AUS] (Australia)
[EAS] (Middle East)
[ASI] (Asia Pacific)
[JAP] (Japan)
[LAT] (Latin America)
EN 13
Select a tuner sensitivity
Store stations manually
To receive stations with strong signals only or
more radio stations, you can change the tuner
sensitivity.
1 Press repeatedly to select a band.
2 Tune to a radio station that you want to
store.
1 Press and hold
to access the system
3 Press and hold a numeric button for three
menu.
seconds.
2 Press repeatedly until [LOCAL] is
» The station is saved in the selected
displayed.
channel.
3 Rotate
to select a setting.
4 Repeat steps 2 and 3 to store more radio
•
[LOCAL ON] (local on): Search
stations with strong signals only.
[LOCAL OFF] (local off): Search
stations with strong and weak signals.
stations.
•
To replace a radio station, store
another one in its channel.
•
Tune to a preset station
Store radio stations in memory
1 Press repeatedly to select a band.
2 Press a numeric key to select a preset
Note
station.
• You can store a maximum of six stations in each band.
Store stations automatically
1 Press and hold
to access the system
menu.
2 Press repeatedly until [STORE >] is
displayed.
3 Press
to confirm.
» The strongest stations of the selected
band are saved in preset channel
automatically.
14 EN
Tip
6 Use Bluetooth
devices
• You can also control the play on the Bluetooth device.
With this car audio system, you can listen to
audio from a player or make a call through
Bluetooth.
Make a call
Note
• Keep the Bluetooth connection active between the
system and your mobile.
Pair a device
Note
Call a number
• Philips does not guarantee compatibility with all
Bluetooth devices.
• Before pairing a device with this system, read its user
manual for compatibility.
On your mobile, call a number.
» [CALL---] is displayed.
Redial the last called number
On your device, follow the steps below.
1 Enable it to search other Bluetooth devices.
2 In the device list, select CMD310.
1 Press .
» [REDIAL] is displayed.
3 Enter the default password "0000".
» If the pairing is successful, [PAIRED] is
displayed.
2 Press
to confirm.
» [CALL---] is displayed.
•
To disconnect the device, disable the
Bluetooth feature on it.
Pick up an incoming call
When the system receives an incoming call, the
phone number or [PHONE IN] is displayed.
Press to answer the call.
Play audio from a Bluetooth
device
Reject an incoming call
1 Pair the Bluetooth device with this system.
Press and hold until [END] is displayed.
2 Press
repeatedly to switch the source
to [BT AUDIO].
» Play starts automatically.
End an call
To end an on-going call, press .
•
•
•
If play does not start, press
To pause play, press again.
To skip to the previous or next track,
press
.
Transfer voice to mobile
/
.
Press and hold until [TRANSFER] is displayed.
» The loudspeakers are muted, and the
voice comes from your mobile only.
EN 15
7 Play from a USB
storage device
Control play
During play, follow the instructions below to
control play.
Buttons Functions
This system can play .mp3 and .wma files that
are copied onto a supported USB storage
device.
Pause or resume play.
Skip to the previous or next track.
/
Note
Press and hold to rewind a track or
search forward fast within a track.
Skip to the previous or next folder
when no less than one folder exits.
• Philips does not guarantee compatibility with all USB
storage devices.
• NTFS (NewTechnology File System) file system is not
supported.
/
Select a repeat mode.
• [REPEATTRACK]: repeat the cur-
rent track
• [REPEAT ALL]: repeat all tracks
• [REPEAT FOLDER]: repeat all
tracks in the current folder
Enable or disable shuffle play.
• [SHUF FOLDER]: play all tracks in
the current folder randomly
• [SHUF ALL]: play all tracks ran-
domly
RESET
1 Connect the USB storage device to the
socket.
• [SHUF OFF]: play tracks in se-
quence
2 Press
repeatedly until [USB] is
displayed.
» Play starts automatically.
If play does not start automatically,
1 Press
2 Press
3 Press
/
to select a folder.
/
to select a file.
to start play.
16 EN
8 Listen to an
external device
9 Use the dock
An application CarStudio is available in the
iTunes App Store for this car audio system.To
enjoy full features, download the application to
your iPhone or iPod touch.
You can use the system to amplify the audio
input from an external device, for example,
MP3 player.
1 Press
repeatedly to switch the source
to [MP3-LINK].
Note
• If the CarStudio application is not installed, a dialog box
prompts you to download it when your iPhone or iPod
touch is docked and recognized.
• If the CarAudio application is installed, a dialog box
prompts you to launch it when your iPhone or iPod
touch is docked and recognized.
2 Connect the MP3 link cable to
•
the MP3-LINK socket on the system,
and
•
the audio output socket (usually the
headphone socket) on the external
device.
3 Play the external device.
Compatible iPod/iPhone
models
This car audio system supports the following
iPod and iPhone models.
•
•
•
•
•
iPhone 4S
iPhone 4
iPhone 3GS
iPhone 3G
iPod touch (3rd and 4th generations)
Prepare for docking
1 Press to eject the dock bracket.
EN 17
2 Pull out the dock bracket until you hear a
Load your iPhone or iPod
touch
"click".
Note
• Before you load your iPhone or iPod touch, make sure
that the dock bracket is in portrait position.
1 Connect your iPhone or iPod touch to the
dock with its screen facing you.
» The system switches the source to
[iPHONE] automatically. If not, press
repeatedly to switch the source.
3 Flip the dock bracket upwards.
4 Press and hold RELEASE to loosen the
hooks.
2 Pinch the hooks to secure your iPhone or
iPod touch.
18 EN
Switch to portrait mode
Adjust the dock bracket
1 Turn the dock bracket clockwise by 90
Caution
degrees.
• When the dock bracket is in portrait position, do not
turn it clockwise.
• When the dock bracket is in landscape position, do not
turn it anti-clockwise.
Switch to landscape mode
Note
2 Adjust the viewing angle.
• Before you turn the dock bracket anti-clockwise, make
sure that you can see the indication line on its left side.
If not, pull the dock bracket outwards.
1 Turn the dock bracket anti-clockwise by 90
degrees.
Pair your iPhone via
Bluetooth
2 Adjust the viewing angle.
Note
• To use the hands-free function, pair your iPhone with
the car audio system via Bluetooth first.
• Make sure that the Bluetooth feature is enabled on
your iPhone.
For an iPhone using iOS 4.X or under
•
Manually complete the pairing. (Refer to
"Use Bluetooth devices" > "Pair a device")
For an iPhone using iOS 5.X
•
For the first time, manually complete
the pairing.Afterwards, the pairing is
automatically complete after your iPhone is
docked and recognized.
EN 19
Landscape mode
Enjoy audio through the dock
In landscape mode, tap the icons to access the
following features.
If the CarStudio application is not installed on
your iPhone or iPod touch, follow the steps
below.
•
Listen to the playlist on the iPhone or iPod
touch.
•
•
Listen to radio.
1 Turn on the car audio system.
Listen to audio that is transferred through
the MP3-LINK socket.
Use the phone call.
2 Switch the source to [iPHONE].
3
Play an audio file or radio station on your
iPhone or iPod touch.
•
•
Change sound settings.
Use the CarStudio application
Charge your iPhone or iPod
touch
Note
• To enjoy the latest features, update the application on
your iPhone or iPod touch when an update message
prompts.
Once the iPhone or iPod touch is docked and
recognized, the charging starts.
• After update, the interface and features may be
different from the description in this section. Follow the
actual operations.
• To switch between portrait mode and landscape
mode smoothly, make sure that the auto-orientation
feature on your iPhone or iPod touch is set to
[Portrait Orientation Unlocked] (Portrait Orientation
Unlocked).
Undock your iPhone or iPod
touch
Note
• Before you undock your iPhone or iPod touch, make
sure that the dock bracket is in portrait position.
Portrait mode
In portrait mode, swipe the screen to use one
of the following features.
1 Press and hold RELEASE to loosen the
hooks.
•
Display available time and weather
information.
•
Listen to the playlist on the iPhone or iPod
touch.
•
•
•
Listen to radio.
Change settings.
Listen to audio that is transferred through
the MP3-LINK socket.
20 EN
2 Pull out your iPhone or iPod touch.
2 Push the dock panel inwards until you hear
a "click".
CLIC
K
3 Flip up the cover.
Tip
• For the safety of your property, undock your iPhone or
iPod touch before leaving your car.
Store the dock bracket
Note
• Before storage, make sure that you have unloaded your
iPhone or iPod touch and pinched the hooks.
1 Flip the dock bracket downwards until you
hear a "click".
» You can see the indication line on top
of the dock panel. If not, pull the dock
panel outwards until you see it.
EN 21
10 Adjust sound
Select a listening zone
1 Press and hold
until one of the
following settings is displayed.
The following operations are applicable to all
supported media.
•
•
•
[ALL]: For all passengers
[FRONT-L]: For the front-left seat only
[FRONT-R]: For the front-right seat
only
Adjust the volume level
•
[FRONT]: For front passengers only
Rotate
clockwise or anti-clockwise.
2 Rotate
to select a setting.
Mute sound
Enable the full-range sound
Press
.
Press
following settings.
repeatedly to select one of the
•
To restore sound, press
again.
•
•
[FULL ON]: Enable the full-range sound
[FULL OFF]: Use the preset equalizer that
you select
Use the DBB sound effect
Press and hold
until one of the following
settings is displayed.
Select a preset sound
equalizer
•
[DBB ON]: Dynamic bass boost (DBB) is
enabled.
•
[DBB OFF]: DBB is disabled.
1 Press and hold
until [SUBW] is
displayed.
2 Press
following preset sound equalizer settings is
displayed.
repeatedly until one of the
Enable the max sound
Press
repeatedly to select one of the
•
•
•
•
•
•
•
•
[FLAT] (flat)
[POP] (pop)
[ROCK] (rock)
[JAZZ] (jazz)
[CLASSIC] (classic)
[TECHNO] (techno)
[OPTIMAL] (optimal)
[USER] (user settings)
following settings.
•
•
[MAX ON]: Use the maximum sound.
[MAX OFF]: Return to the customized
sound.
3 Rotate
to select the sound equalizer
that you want.
22 EN
11 Adjust system
settings
Other sound settings
1 Press and hold
until [SUBW] is
displayed.
2 Press
repeatedly to select a setting.
[SUBW]: Enable or mute the
1 Press and hold
to access the system
•
•
•
menu.
subwoofer
2 Press repeatedly until one of the
[BALANCE]: Balance of sound from
left and right speakers (12L to 12R)
[FADER]: Fade of sound from front
and rear speakers (12R to 12F)
[BASS]: Bass level (-7 to +7)
[TREBLE]:Treble level (-7 to +7)
following settings is displayed.
•
[BEEP], [BKO], [DIMMER], or [DEMO]
3 Rotate
to change the setting.
•
•
[BEEP]
[BEEP
Enable the beep
sound of buttons.
Disable the beep
sound of buttons.
Turn off the screen
automatically 10
seconds after the last
operation.
ON]
[BEEP
OFF]
[BKO
10S]
3 Rotate
clockwise or anti-clockwise
to change the setting.
[BKO]
[BKO
20S]
Turn off the screen
automatically 20
seconds after the last
operation.
[BKO
OFF]
Never turn off the
screen automatically.
[DIMMER] [DIMMER Increase the
HIGH] brightness level of
the screen.
[DIMMER Decrease the
LOW] brightness level of
the screen.
[DEMO Demonstrate all
[DEMO]
ON]
features after the
system stays inactive
for 120 seconds.
[DEMO Disable the demo
OFF] mode.
EN 23
SUB-W
12 Additional
information
L
R
REAR LINE OUT
Reset the system
You can reset the system to factory default
settings.
Note
• If the fuse gets damaged immediately after it is
replaced, there may be an internal malfunction. In such
case, consult your Philips retailer.
1 Open the cover for the USB socket, MP3-
LINK socket, and RESET button.
2 Press the RESET button with the tip of a
ball-point pen or toothpick.
» The system is turned off, and all
settings are reset to factory default.
Replace the fuse
If there is no power, check the fuse and replace
it if it is damaged.
1 Detach the front panel and take out the
system.
2 Check the electric connection.
3 Buy a fuse that matches the voltage of the
damaged fuse (15A)
4 Replace the fuse.
24 EN
Bluetooth
13 Product
information
Output
power
Frequency
band
0 dBm (Class 2)
2.4000 GHz - 2.4835 GHz ISM
Band
Note
Range
Standard
3 meters(free space)
Bluetooth 2.0 specification
• Product information is subject to change without prior
notice.
Compatible USB storage devices:
•
•
USB flash memory (USB 2.0 or USB1.1)
USB flash players (USB 2.0 or USB1.1)
Power supply
12V DC (11V - 16V),
negative ground
15 A
Supported formats:
Fuse
•
•
•
USB or memory file format: FAT16, FAT32
WMAV4,V7,V8,V9 (L1, L2)
Sampling frequencies
Suitable speaker
impedance
Maximum power
output
Continuous power
output
Pre-Amp output
voltage
Aux-in level
Dimensions
(W x H x D)
Weight
4-8
50 W x 4 channels
•
•
MP3: 32 kKz, 44.1 kKz, 48kKz
WMA: 44.1 kKz, 48 kKz
22 W x 4 RMS (4
10%T.H.D.)
2.5V
•
Bitrates
•
•
MP3: 8-320 kbps and variable bitrates
WMA: 64-192 kbps and variable
bitrates
500 mV
•
Directory nesting up to a maximum of 8
levels
Number of albums/folders: maximum 99
Number of tracks/titles/files: maximum 999
ID3 tag v2.0 or later
188 x 58 x 199.5 mm
1.32 kg
•
•
•
Radio
Unsupported formats:
•
Empty albums:An empty album is an
album that does not contain MP3/WMA
files, and is not shown in the display.
Unsupported file formats are skipped. For
example,Word documents (.doc) or MP3
files with extension .dlf are ignored and
not played.
AAC,WAV, PCM audio files
DRM protected WMA files (.wav, .m4a,
.m4p, .mp4, .aac)
Frequency range
- FM
87.5-108.0 MHz (100
kHz per step in auto
search and 50 kHz per
step in manual search)
522-1620 kHz (9 kHz)
530-1710 kHz (10 kHz)
8 µV
•
Frequency range -
AM(MW)
Usable sensitivity
- FM
Usable sensitivity -
AM(MW)
(S/N = 20 dB)
•
•
30 µV
•
WMA files in Lossless format
EN 25
Preset stations lost.
14 Troubleshooting
•
Battery cable is not correctly connected.
Connect the battery cable to the terminal
that is always live.
Warning
Display show ERR-12
• Never remove the casing of this apparatus.
•
USB data error. Check the USB storage
device.
To keep the warranty valid, never try to repair
the product yourself.
GPS signal reception of the iPhone or iPod
touch is poor.
If you encounter problems when using this
product, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page
(www.philips.com/welcome).When you contact
Philips, make sure that the product is nearby
and the model number and serial number are
available.
•
Remove the iPhone or iPod touch from
the dock, and place it in aother location for
better signal reception.
About Bluetooth device
Cannot pair the Bluetooth enabled device
with the car audio system.
General
•
The device does not support the profiles
required for the system.
•
The Bluetooth function of the device is not
enabled. Refer to the user manual of the
device for how to enable the function.
No power or no sound.
•
The power supply from car battery is cut
off, or the car battery runs out of energy.
Power the system with car battery.
Car engine is not on.Turn the car engine
on.
The audio quality is poor after connection
with a Bluetooth-enabled device.
•
•
•
The microphone is not correctly
positioned.Adjust the position of the
microphone. For example, stick the
microphone onto the dashboard where
close to the driver.
The Bluetooth reception is poor. Move the
device closer to the car audio system or
remove any obstacle between the device
and the system.
Cable is not correctly connected. Check
connections.
•
•
•
Fuse is burnt. Replace fuse.
Volume is too low.Adjust volume.
If the above solutions cannot help, press
the RESET button.
•
•
Make sure that the current track is in a
compatible format.
Music playback is unavailable on the system
even after successful Bluetooth connection.
Noise in broadcasts.
•
Signals are too weak. Select other stations
with stronger signals.
•
The device cannot be used with the
system to play music.
•
•
Check the connection of the car antenna.
Change the broadcast setting from stereo
to mono.
26 EN
The paired mobile phone connects and
disconnects constantly.
15 Glossary
•
•
•
The Bluetooth reception is poor. Move
the mobile phone closer to the car audio
system or remove any obstacle between
the mobile phone and the system.
Some mobile phones may connect and
disconnect constantly when you make
or end calls.This does not indicate any
malfunction of the system.
M
MP3
A file format with a sound data compression
system. MP3 is the abbreviation of Motion
Picture Experts Group 1 (or MPEG-1) Audio
Layer 3.With the MP3 format, one CD-R or
CD-RW can contain about 10 times more data
than a regular CD.
For some mobile phones, the Bluetooth
connection may be deactivated
automatically as a power-saving feature.
This does not indicate any malfunction of
the system.
W
WMA (Windows Media Audio)
An audio format owned by Microsoft, is a
part of Microsoft Windows Media technology.
Includes Microsoft Digital Rights Management
tools,Windows MediaVideo encoding
technology, and Windows Media Audio
encoding technology.
EN 27
SISTEMA DE AUDIO PARA AUTOMOVIL
MODELO: CMD310/55
Alimentación: 12Vcc
15A Tierra negativo
Philips Electronics Hong Kong Ltda
Specifications are subject to change without notice
© 2013 Koninklijke Philips Electronics N.V.
All rights reserved.
CMD310_55_UM_V3.0
|