Ricoh CX3 User Manual
Camera User Guide  
The serial number of this product  
is given on the bottom face of the  
camera.  
Basic Operations  
If you are using the camera for the first time, read this section.  
This section provides a basic overview of how to turn on the camera, take  
pictures and play back pictures.  
Advanced Operations  
Read this section when you want to learn more about the different camera  
functions.  
This section provides more detailed information about the functions used to  
take pictures and play back pictures, as well as information on how to customize  
the camera settings, print pictures, and use the camera with a computer.  
The rechargeable battery needs to be charged before use. The battery is not  
charged at the time of purchase.  
Safety Precautions  
Warning Symbols  
Various symbols are used throughout this instruction manual and on the  
product to prevent physical harm to you or other people and damage to  
property. The symbols and their meanings are explained below.  
This symbol indicates matters that may lead to imminent risk of death or  
serious injury if ignored or incorrectly handled.  
Danger  
This symbol indicates matters that may lead to death or serious injury if  
ignored or incorrectly handled.  
Warning  
This symbol indicates matters that may lead to injury or physical damage if  
ignored or incorrectly handled.  
Caution  
Sample Warnings  
The symbol alerts you to actions that must be performed.  
The symbol alerts you to prohibited actions.  
The symbol may be combined with other symbols to indicate that a specific  
action is prohibited.  
●
Examples  
Do not touch  
Do not disassemble  
Observe the following precautions to ensure safe use of this equipment.  
Danger  
●
Do not attempt to disassemble, repair or alter the equipment yourself. The high-  
voltage circuitry in the equipment poses significant electrical hazard.  
●
Do not attempt to disassemble, alter or directly solder the battery.  
●
Do not put the battery in a fire, attempt to heat it, use it in a high temperature  
environment such as next to a fire or inside a car, or abandon it. Do not put it into  
water or the sea or allow it to get wet.  
●
Do not attempt to pierce, hit, compress, drop, or subject the battery to any other  
severe impact or force.  
●
Do not use a battery that is significantly damaged or deformed.  
1
Warning  
●
Turn off the power immediately in the event of abnormalities such as smoke  
or unusual odors being emitted. Remove the battery as soon as possible,  
being careful to avoid electric shocks or burns. If you are drawing power from a  
household electrical outlet, be sure to unplug the power cord from the outlet to  
avoid fire or electrical hazards. Discontinue use of the equipment immediately if it  
is malfunctioning. Contact the nearest service center at your earliest convenience.  
●
Turn off the power immediately if any metallic object, water, liquid or other  
foreign object gets into the camera. Remove the battery and memory card  
as soon as possible, being careful to avoid electric shocks or burns. If you are  
drawing power from a household electrical outlet, be sure to unplug the power  
cord from the outlet to avoid fire or electrical hazards. Discontinue use of the  
equipment immediately if it is malfunctioning. Contact the nearest service center  
at your earliest convenience.  
●
Avoid any contact with the liquid crystal inside the picture display, should the  
monitor be damaged. Follow the appropriate emergency measures below.  
• SKIN: If any of the liquid crystal gets on your skin, wipe it off and rinse the  
affected area thoroughly with water, then wash well with soap.  
• EYES: If it gets in your eyes, wash your eyes with clean water for at least 15  
minutes and seek medical advice immediately.  
• INGESTION: If any of the liquid crystal is ingested, rinse the mouth out thoroughly  
with water. Have the person drink a large amount of water and induce vomiting.  
Seek medical assistance immediately.  
●
Follow these precautions to prevent the battery from leaking, overheating,  
igniting or exploding.  
• Do not use a battery other than those specifically recommended for the  
equipment.  
• Do not carry or store together with metal objects such as ballpoint pens,  
necklaces, coins, hairpins, etc.  
• Do not put the battery into a microwave or high pressure container.  
• If leakage of battery fluid or a strange odor, color change, etc. is noticed during  
use or during charging, remove the battery from the camera or battery charger  
immediately and keep it away from fire.  
●
Please observe the following in order to prevent fire, electrical shock or cracking  
of the battery while charging.  
• Use only the indicated power supply voltage. Also avoid the use of multi-socket  
adapters and extension cords.  
• Do not damage, bundle or alter power cords. Also, do not place heavy objects on,  
stretch or bend power cords.  
• Do not connect or disconnect the power plug with wet hands. Always grip the  
plug section when disconnecting a power cord.  
• Do not cover equipment while charging.  
●
Keep the battery and SD memory card used in this equipment out of the reach  
of children to prevent accidental ingestion. Consumption is harmful to human  
beings. If swallowed, seek medical assistance immediately.  
2
●
●
Keep the equipment out of the reach of children.  
Do not touch the internal components of the equipment if they become  
exposed as a result of being dropped or damaged. The high-voltage circuitry in  
the equipment could lead to an electric shock. Remove the battery as soon as  
possible, being careful to avoid electric shocks or burns. Take the equipment to  
your nearest dealer or service center if it is damaged.  
●
Do not use the equipment in wet areas as this could result in fire or electric  
shock.  
●
●
Do not use the equipment near flammable gases, gasoline, benzene, thinner or  
similar substances to avoid the risk of explosion, fire or burns.  
Do not use the equipment in locations where usage is restricted or prohibited as  
this may lead to disasters or accidents.  
●
●
Wipe off any dust that accumulates on the electrical plug as this may lead to fire.  
Use only the specified AC adapter in household electrical outlets. Other adapters  
pose the risk of fire, electric shock or injury.  
●
To avoid the risk of fire, electric shock or injury, do not use the battery charger or  
AC adapter with commercially available electronic transformers when traveling  
abroad.  
Observe the following precautions to ensure safe use of this unit.  
Caution  
●
Contact with fluid leaking from a battery can lead to burns. If part of your body  
comes in contact with a damaged battery, rinse the area with water immediately.  
(Do not use soap.)  
If a battery starts to leak, remove it immediately from the equipment and wipe  
the battery chamber thoroughly before replacing it with a new battery.  
●
Plug the power cords securely into the electrical outlets. Loose cords pose a fire  
hazard.  
●
Do not allow the camera to get wet. In addition, do not operate it with wet  
hands. Both pose the risk of electric shock.  
●
Do not fire the flash at drivers of vehicles, as this may cause the driver to lose  
control and result in a traffic accident.  
Safety Precautions When using optional products, carefully read the instructions provided  
for Accessories  
with the product before using that product.  
3
Using the Manuals  
The following two manuals are included with your CX3.  
"Camera User Guide" (This booklet)  
Camera User Guide  
This guide explains the usage and functions of the camera.  
It also explains how to install the provided software on your  
computer.  
The serial number of this product  
is given on the bottom face of the  
camera.  
Basic Operations  
If you are using the camera for the first time, read this section.  
This section provides basic overview of how to turn on the camera, take  
a
pictures and play back pictures.  
Advanced Operations  
Read this section when you want to learn more about the different camera  
functions.  
This section provides more detailed information about the functions used to  
take pictures and play back pictures, as well as information on how to customize  
the camera settings, print pictures, and use the camera with  
a
computer.  
The rechargeable battery needs to be charged before use. The battery is not  
charged at the time of purchase.  
"Software User Guide" (PDF file)  
The "Software User Guide" is available in the following  
folders on the provided CD-ROM.  
This guide explains how to download images from the  
camera to your computer.  
Each language has its own  
"Software User Guide" in  
the respective folder.  
To copy the User Guide onto your hard disk, copy the PDF file  
from the respective folder directly to your hard disk.  
"Irodio Photo & Video Studio" image viewing and editing software (for  
Windows only) is also included with the camera. For how to use Irodio  
Photo & Video Studio, see the displayed "Help".  
For more information on Irodio Photo & Video Studio, contact the Customer  
Support Center below.  
North America (U.S.)  
Europe  
TEL: (Toll Free) +1-800-458-4029  
UK, Germany, France and Spain: TEL: (Toll Free) +800-1532-4865  
Other Countries:  
Asia  
China  
TEL: +44-1489-564-764  
TEL: +63-2-438-0090  
TEL: +86-21-5385-3786  
Business hours: 9:00 AM to 5:00 PM  
4
Contents  
Safety Precautions................................................................................................ 1  
Using the Manuals................................................................................................ 4  
Contents................................................................................................................... 5  
Basic Operations  
11  
Packing List ...........................................................................................................12  
Optional Accessories.................................................................................................................12  
How to Use the Mode Dial...............................................................................13  
Names of Parts.....................................................................................................14  
Picture Display .....................................................................................................16  
Getting Ready ......................................................................................................19  
About the Battery........................................................................................................................19  
About the SD Memory Card (available in stores) ....................................................20  
Charging the Rechargeable Battery.................................................................................21  
Loading the Rechargeable Battery and SD Memory Card.................................22  
Turning the Power On/Off.....................................................................................................23  
Setting the Language, Date and Time ...........................................................................23  
Basic Shooting .....................................................................................................25  
Shooting in Auto Shooting Mode (Focus and Shoot)..........................................25  
Using the Zoom Function......................................................................................................27  
Shooting Close-Ups (Macro Shooting)..........................................................................28  
Using the Flash..............................................................................................................................29  
Using the Self-timer...................................................................................................................30  
Shooting in Scene Auto Mode............................................................................................31  
Playing Back Images ..........................................................................................32  
Viewing Your Images.................................................................................................................32  
Thumbnail View............................................................................................................................32  
Enlarging Images.........................................................................................................................34  
Deleting Files........................................................................................................35  
Deleting a File or All Files........................................................................................................35  
Specifying Multiple Files Separately ................................................................................36  
Specifying a Range of Multiple Files................................................................................37  
Changing the Display with the DISP. Button.............................................38  
About the Electronic Level....................................................................................................40  
About the Histogram Display..............................................................................................42  
5
Advanced Operations  
43  
ADJ. Button Functions  
44  
1
Selecting Shooting Menu Options Assigned to the ADJ./OK Button.........44  
Shifting the AE and AF Targets............................................................................................45  
Using the Fn (Function) Button  
46  
2
Assigning a Role to the Fn Button ....................................................................................47  
Shifting the AF Target for Macro Shooting..................................................................47  
Locking the Exposure ...............................................................................................................48  
Choosing a Focus Setting ...................................................................................................... 49  
Shooting Mode Types  
50  
3
Scene Mode (SCENE) .........................................................................................50  
Selecting a Scene Mode .........................................................................................................52  
Shooting in Miniaturization Mode ...................................................................................53  
Using Skew Correction Mode..............................................................................................55  
Dynamic Range Double Shot Mode (Q ) ..................................................56  
Dynamic Range Expansion Effect .....................................................................................57  
Dynamic Range Expansion Plus Normal Shooting ................................................57  
Continuous Mode (R ).....................................................................................58  
M-Cont Plus (10M)......................................................................................................................59  
M-Cont Plus (2M).........................................................................................................................60  
Speed Cont (Low)/Speed Cont (High)...........................................................................60  
Movie Mode (3) ................................................................................................61  
Shooting Movies..........................................................................................................................61  
Playback Functions  
62  
4
5
Playing Back Movies...........................................................................................62  
Playing Back MP Files.........................................................................................62  
Exporting MP Files ......................................................................................................................64  
Shooting Menu  
66  
Using the Menu ...................................................................................................66  
Shooting Menu Options...................................................................................67  
Dynamic Range Expansion: Dynamic Range Expansion Effects.....................67  
Plus Normal Shooting: Recording Un-enhanced Copies of Enhanced  
Photographs..........................................................................................................................67  
Picture Quality/Size: Choosing Size and Compression Options for  
Photographs..........................................................................................................................67  
6
Movie Size: Choosing a Frame Size for Movies...........................................................67  
Density: Adjusting Contrast in Text Mode ....................................................................67  
Size: Choosing the Size of Photographs Taken in Text Mode ................................67  
Focus: Choosing How the Camera Focuses..................................................................67  
Pre-AF: Improving Shutter Response..............................................................................68  
Exposure Metering: Choosing How the Camera Sets Exposure .......................68  
Image Settings: Adjusting Contrast, Sharpness, Color, and Vividness.............68  
Noise Reduction: Controlling Image“Noise”..............................................................69  
Flash Exposure Compensation: Adjusting Flash Level........................................69  
Auto Bracket: Varying Settings over a Series of Photographs.............................69  
Time Exposure: Creating Light Trails ..............................................................................69  
Custom Self-Timer: Taking a Series of Pictures with the Self-Timer.................69  
Interval Shooting: Interval Timer Photography ........................................................70  
Camera Shake Correction: Reducing Blur Caused by Camera Shake............70  
Slow Shutter Limit: Choosing the Slowest Available Shutter Speed...............71  
Date Imprint: Imprinting the Time and Date of Recording on Photographs....71  
Exposure Compensation: Adjusting Exposure........................................................71  
White Balance: Adjusting Colors According to the Light Source ......................71  
ISO Setting: Controlling the Camera’s Sensitivity to Light.....................................71  
Restore Defaults: Restoring Default Shooting Menu Settings ...........................71  
Focus...................................................................................................................................................72  
Multi-Target AF: Varying the Focus Position over a Series of Photographs...72  
Manual Focus (MF): Focusing Manually.......................................................................73  
Auto Bracketing............................................................................................................................73  
Auto Bracket: Varying Exposure over a Series of Photographs...........................74  
White Balance Bracket (WB-BKT): Creating Photographs with Varying  
White Balance .......................................................................................................................74  
Color Bracketing (CL-BKT): Creating Photographs with Varying Color  
Settings....................................................................................................................................74  
Focus Bracketing (FOCUS-BKT): Varying Focus Distance over a Series of  
Photographs..........................................................................................................................75  
Exposure Compensation ........................................................................................................76  
White Balance................................................................................................................................77  
Manual Settings: Measuring White Balance...............................................................78  
ISO Setting: ISO Sensitivity........................................................................................................78  
Playback Menu  
79  
6
Using the Menu ...................................................................................................79  
Playback Menu Options....................................................................................80  
Flag Function Setting: Flagging Images.....................................................................80  
7
Flag Function Display: Viewing Flagged Images ....................................................80  
Export Still Images: Exporting Selected Images from an MP File.....................80  
Resize: Creating Small Copies of Images .......................................................................80  
Trim: Creating Cropped Copies ..........................................................................................80  
Level Compensation: Creating Copies with Modified Brightness and  
Contrast....................................................................................................................................80  
White Balance Compensation: Creating Copies with Modified White  
Balance.....................................................................................................................................80  
Skew Correction: Reducing the Effects of Perspective..........................................80  
Protect: Protecting Images from Accidental Deletion.............................................80  
Slide Show: Automatic Playback......................................................................................80  
Copy to Card from Internal Memory: Copying Pictures from Internal  
Memory to a Memory Card.............................................................................................81  
DPOF: Selecting Pictures for Printing..............................................................................81  
Recover File: Restoring Deleted Files..............................................................................81  
Flag Function Setting................................................................................................................82  
Setting/Canceling One File at a Time........................................................................82  
Setting/Canceling Multiple Files at One Time.....................................................82  
Trim ......................................................................................................................................................83  
Level Compensation..................................................................................................................85  
Correcting Images Automatically................................................................................86  
Correcting Images Manually...........................................................................................86  
White Balance Compensation.............................................................................................87  
Skew Correction...........................................................................................................................88  
Protect................................................................................................................................................89  
DPOF ...................................................................................................................................................90  
Viewing Pictures on TV .....................................................................................91  
Setup Menu  
92  
7
Using the Menu ...................................................................................................92  
Setup Menu Options..........................................................................................93  
Format [Card]: Formatting Memory Cards..................................................................93  
Format [Internal Memory]: Formatting Internal Memory ..................................93  
LCD Brightness: Adjusting the Picture Display Brightness...................................93  
Reg. My Settings: Saving Camera Settings .................................................................93  
Step Zoom: Adjusting Zoom in Discrete Steps..........................................................93  
Set Fn Button: Choosing a Role for the Fn Button....................................................93  
ADJ Button Setting 1–4: Choosing Roles for the ADJ. Button...........................93  
Maximum ISO for ISO Auto: Choosing an Upper Limit for Auto ISO  
Sensitivity................................................................................................................................93  
8
AF Auxiliary Light: Assisting Autofocus........................................................................93  
Operation Sounds: Choosing the Sounds Made by the Camera......................94  
Volume Settings: Controlling Volume...........................................................................94  
LCD Confirmation Time: Displaying Photos After Shooting ..............................94  
Auto Power Off: Camera Power Saving........................................................................94  
LCD Auto Dim: Picture Display Power Saving............................................................94  
Digital Zoom Image: Recording Photos Taken with Digital Zoom at  
Actual Size ..............................................................................................................................94  
Level Setting: Adjusting Tilt Indicator Settings..........................................................94  
Grid Guide Display Options: Choosing a Framing Guide...................................95  
Shooting Info. Display Frame: Viewing Settings at a Glance............................95  
Minimum Distance: Displaying the Minimum Focus Distance.........................95  
Auto Rotate: Rotating Pictures for Playback................................................................95  
White Saturation Display: Viewing Image Highlights ..........................................95  
Card Sequence No.: File Numbering Options...........................................................96  
Date Settings: Setting the Camera Clock.....................................................................96  
Language/N : Choosing a Language......................................................................96  
Video Out Mode: Choosing a Video Format...............................................................96  
Reg. My Settings...........................................................................................................................97  
Digital Zoom Image...................................................................................................................98  
Direct Printing  
99  
8
9
About the Direct Print Function ....................................................................99  
Connecting the Camera to a Printer ............................................................99  
Printing Still Images........................................................................................ 100  
Printing One or All Still Images........................................................................................ 100  
Printing Several Still Images............................................................................................... 102  
Downloading Images to Your Computer  
103  
For Windows ...................................................................................................... 103  
System Requirements for Using the Supplied CD-ROM.................................. 103  
CD-ROM Setup........................................................................................................................... 104  
Copying Pictures to Your Computer............................................................................. 107  
For Macintosh.................................................................................................... 109  
Copying Pictures to Your Computer............................................................................. 109  
Using the MP File Viewer ..................................................................................................... 110  
9
Appendices  
112  
10  
Troubleshooting............................................................................................... 112  
Error Messages........................................................................................................................... 112  
Camera Troubleshooting..................................................................................................... 113  
Available Settings ............................................................................................ 118  
Specifications .................................................................................................... 122  
Number of Images That Can Be Stored.................................................... 124  
Defaults Settings/Functions Whose Defaults Are Restored When  
the Camera Is Turned Off.......................................................................... 126  
Using Your Camera Abroad .......................................................................... 128  
Cautions on Use................................................................................................ 129  
Care and Storage.............................................................................................. 130  
Warranty and Servicing ................................................................................. 131  
Index............................................................................................ 133  
10  
Basic  
Operations  
If you are using the camera  
for the first time, read this  
section.  
Packing List..........................................12  
How to Use the Mode Dial ...................13  
Names of Parts.....................................14  
Picture Display.....................................16  
Getting Ready......................................19  
Basic Shooting .....................................25  
Playing Back Images............................32  
Deleting Files .......................................35  
Changing the Display with the DISP.  
Button ............................................38  
Packing List  
Open the package and make sure all the items are included.  
* The actual appearance of items included may differ.  
• CX3  
• Rechargeable Battery  
• Battery Charger  
The serial number of the camera  
is provided on the bottom face of  
the camera.  
• USB Cable (Mini B cable)  
• AV Cable  
• Handstrap  
• Warranty  
• Camera User Guide  
• CD-ROM (G P.103)  
Optional Accessories  
• Soft Case (SC-90)  
Used to store your camera.  
• Rechargeable Battery  
(DB-100)  
• Cable Switch (CA-1)  
A switch that connects to the  
camera’s USB terminal to operate  
the shutter.  
• Neck Strap (ST-2)  
A double-loop neck strap with  
embroidered RICOH logo.  
• Battery Charger (BJ-10)  
Note-------------------------------------------------------------------------------------  
Attaching the Handstrap/Neck Strap to the Camera  
Thread the small end of the strap through  
the strap eyelet on the camera and loop  
the ends. Remove the end of the neck  
strap from the buckle and attach it as  
shown in the illustration.  
• For the latest information on optional  
accessories, see the Ricoh website (http://www.ricohpmmc.com/).  
12  
How to Use the Mode Dial  
Set the mode dial to the desired mode  
before shooting still images or movies.  
Mode Dial Symbols and Descriptions  
Symbol  
Function  
Description  
Refer to  
Auto Shooting Mode Automatically sets the optimal  
aperture value and shutter speed  
P.25  
5
depending on the subject.  
My Settings Mode  
You can shoot using the settings  
registered in [Reg. My Settings].  
Allows you to shoot movies.  
P.97  
MY1, MY2  
Movie Mode  
P.61  
P.31  
3
Scene Auto Mode  
The camera automatically selects  
the optimal scene mode for simple  
point-and-shoot photography.  
Allows you to shoot with settings  
optimized for the shooting scene.  
You can shoot with various  
continuous shooting functions.  
Allows you to shoot images that  
look natural even in the dark areas  
and bright areas of scenes with high  
contrast.  
S-AUTO  
Scene Mode  
P.50  
P.58  
P.56  
SCENE  
Continuous Mode  
R
Dynamic Range  
Double-shot Mode  
Q
13  
Names of Parts  
Camera  
Front View  
4 3  
1 2  
5
6
7
8
9
Item Name  
Refer to  
1
Mode Dial  
P.13, 25, 31, 52, 56,  
58, 61  
2
3
4
5
6
Shutter Release Button  
POWER Button  
Microphone  
P.25  
P.23  
P.61  
—
Lens Cover  
P.27, 32, 34  
Zoom Lever z (Telephoto)/Z (Wide-angle)  
8 (Enlarged View)/9 (Thumbnail View)  
7
8
9
Flash  
P.29  
P.30, 93  
—
AF Auxiliary Light/Self-Timer Lamp  
Lens  
14  
Rear View  
7
8
2
2
1
9
10  
11  
12  
13  
3
4
5
6
14  
15  
16 17  
Item Name  
Refer to  
1
2
Picture Display  
Strap Eyelet  
P.16  
P.12  
3
4
Terminal Cover  
Speaker  
P.91, 99, 107, 109  
P.62  
5
6
7
8
USB Terminal  
AV Output Terminal  
N (Macro)  
ADJ./OK Button (*)  
F (Flash)  
P.99, 107, 109  
P.91  
P.28  
P.44  
P.29  
9
10  
P.32  
6 (Playback) Button  
11 MENU Button  
12 Fn (Function) Button  
P.52, 66, 79, 92  
P.46  
13  
P.30, 35  
P.34, 38, 40  
—
P.22  
P.123  
t (Self-timer)/D (Delete) Button  
14 DISP. Button  
15 Power (DC input) Cable Cover  
16 Battery/Card Cover  
17 Tripod Screw Hole  
(
)
*
Instructions in this manual to "Press the ADJ./OK button !"NF"  
indicate that you should press the ADJ./OK button in the up, down, left  
or right direction. Instructions to "Press the ADJ./OK button" indicate  
that you should press directly down on the button.  
15  
Picture Display  
Example of Picture Display when Shooting Pictures  
Still Image Mode  
1
2
3 4  
5
6 7 8  
9
10  
ĬıįĴ  
Interval  
ĵĻĴ Ň  
ĵ
22  
24  
25  
11  
12  
13  
14  
15  
34  
35  
21  
27  
IJŤŮĮ  
˴ĵįĹ  
1 second  
33  
16  
17  
18  
19  
20  
26  
32  
ŇĴįĶ IJİIJııı ņŗġĬıįĸ ŊŔŐġIJıı  
28  
Item Name  
Flash Mode  
Flash Exposure Compensation P.69  
Multi-Target AF Focus Mark P.72  
Scene Mode/Plus Normal  
Shooting/Continuous Mode 57, 58  
Shooting Mode Types P.13  
Remaining Number of Still P.124  
Images  
29  
30  
31  
Refer to  
Item Name  
Refer to  
P.70  
P.18  
P.69  
P.30  
1
2
3
4
P.29  
19 Camera Shake Correction  
20 Battery Symbol  
21 Time Exposure  
22 Self-timer  
P.50,  
5
6
23 Macro Shooting  
24 Minimum Shooting  
Distance  
P.28  
P.95  
7
Recording Destination  
P.20  
25 Digital Zoom Magnification/ P.28, 98  
Auto Resize Zoom  
8
9
AE Lock  
Image Size  
P.48  
P.67  
P.67  
P.67  
P.77  
P.68  
P.68  
P.73  
P.42  
P.69  
P.71  
26 Zoom Bar  
27 Interval Shooting  
28 Aperture  
29 Shutter Speed  
30 Exposure Compensation  
31 ISO Setting  
32 Level Indicator  
33 AF Frame  
P.27  
P.70  
P.122  
P.71  
P.76  
P.78  
P.41  
P.25  
10 Picture Quality  
11 Focus Mode  
12 White Balance  
13 Exposure Metering  
14 Image Settings  
15 Bracket Shooting  
16 Histogram  
34 Exposure Warning Indicator P.76  
35 Camera Shake Warning Symbol P.27, 70  
17 Noise Reduction  
18 Date Imprint  
16  
Movie Mode  
36  
37  
ııĻıı İııĻıij  
ķĵı  
ɜ
38  
œņń  
Shutter butoon : Start  
Item Name  
Refer to  
Item Name  
Refer to  
36 Recording Time  
P.124  
38 Movie Recording Indicator P.61  
37 Remaining Recording Time P.124  
Note-------------------------------------------------------------------------------------  
When the number of remaining shots is 10,000 or more, “9999”is displayed.  
Example of Picture Display During Playback  
Still Image Mode  
Movie Mode  
1
2
3
4
5
6 7  
8
9
10  
IJııĮııIJı IJıİijı  
ķĵı  
ĵĻĴ Ň  
15  
16  
ıĶĻIJij  
Start  
2010/01//01 00:00  
ijıIJıİıIJİıIJġııĻıı  
11  
12 13  
14  
Item Name  
File Number  
Number of Playback Files  
Total Number of Files  
Mode Types  
Flag Function Setting  
Protect  
DPOF  
Refer to  
—
—
—
Item Name  
Image Size  
10 Picture Quality  
11 Date at Shooting  
12 Aperture  
13 Shutter Speed  
14 Battery Symbol  
15 Recording Time or Lapsed  
Time  
Refer to  
1
2
3
4
5
6
7
9
P.67  
P.67  
P.24  
P.122  
P.71  
P.18  
—
—
P.82  
P.89  
P.90  
8
Playback Data Source  
P.20  
16 Indicator  
—
17  
Note-------------------------------------------------------------------------------------  
• The picture display may display messages to inform you of operational  
instructions or the camera’s status while in use.  
• Additional information can be viewed by pressing the DISP. button. (G P.38)  
1
2
3
5
6
100-0273 10/20  
ĵĻĴ Ň  
AUTO  
4
7
AUTO  
F 5.0 1/60 ISO 100  
EV +0.7  
G:5,A:2  
28 mm  
Blue  
F 5.0 1/60 ISO 100  
EV +0.7  
8
10  
9
11  
13  
G:5,A:2  
28 mm  
Blue  
C:+0,S:+0,D:+0  
12  
C:+0,S:+0,D:+0  
14  
16  
15  
2010/01//01 00:00  
MAX  
Item Name  
Shooting Mode  
Refer to  
—
Item Name  
White Balance /White  
Balance Compensation  
Refer to  
1
9
P.77,  
P.87  
P.29  
2
3
4
5
6
7
8
Plus Normal Shooting  
Dynamic Range Expansion P.57  
Aperture  
Shutter Speed  
ISO Setting  
P.57  
10 Flash Mode  
11 Focal Length of the Zoom P.27  
12 Macro Shooting  
13 Focus Mode  
14 Auto Bracket  
P.122  
P.71  
P.78  
P.76  
P.68  
P.28  
P.67  
P.73  
P.68  
P.69  
Exposure Compensation  
Exposure Metering  
15 Image Settings  
16 Noise Reduction  
Battery Level Indication  
A battery symbol appears at the lower right of the picture display to  
indicate the battery level. Recharge the battery before it is depleted.  
Battery Symbol  
Description  
Battery is sufficiently charged.  
Green  
Battery partially discharged. Recharging is recommended.  
Battery level is low. Recharge the battery.  
18  
Getting Ready  
Turn the power on and get ready to shoot.  
Note-------------------------------------------------------------------------------------  
• Be sure the camera is off before removing the battery.  
• For information on how to turn the camera off, see P.23.  
About the Battery  
This camera uses the rechargeable battery DB-100, a dedicated  
lithium-ion battery supplied with the camera. The rechargeable  
battery needs to be charged before use. The battery is not charged at  
the time of purchase.  
Number of shots you can take ----------------------------------------------------  
Approximate number of shots you can take on a single charge: Approx. 310  
* When [LCD Auto Dim] (G P.94) is set to [On].  
• Based on CIPA standard. (Temperature: 23 degrees Celsius, picture display on,  
30 seconds between shots, changing the zoom setting from telephoto to wide-  
angle or wide-angle to telephoto for each shot, 50% flash usage, turning the  
power off after each 10 shots)  
• You can take approximately 290 shots when [LCD Auto Dim] is set to [Off].  
• Set the camera to synchro-monitor mode to increase the number of shots you  
can take. (G P.38)  
• The number of shots is for reference only. If the camera is used for long periods  
of time for setting and playback, the shooting time (the number of shots)  
will decrease. If you intend to use the camera for a long period of time, we  
recommend carrying a spare battery.  
Caution---------------------------------------------------------------------------------  
• The battery may become very hot immediately after operation. Turn the camera  
off and leave it to cool down sufficiently before removing the battery.  
• Please remove the battery if you are not going to use the camera for a long  
period of time.  
• When using a lithium-ion battery, use only the specified rechargeable lithium-  
ion battery (DB-100). Do not use any other battery.  
19  
About the SD Memory Card (available in stores)  
You can store images you have taken either in the camera’s internal  
memory or on an SD memory card (available in stores). The internal  
memory capacity is approximately 88 MB.  
About Formatting -------------------------------------------------------------------  
Before using a memory card for the first time or after using a memory card in  
other devices, be sure to format it with this camera. (G P.93)  
Where images are recorded -------------------------------------------------------  
When no SD memory card is loaded, the camera records images to the internal  
memory; when an SD memory card is loaded, it records images to the SD  
memory card.  
Where images are played back from --------------------------------------------  
When no SD memory card is loaded, the camera plays back from the internal  
memory. When an SD memory card is loaded, it plays back from the SD memory  
card.  
Caution---------------------------------------------------------------------------------  
• If an SD memory card is loaded, the camera does not record to the internal  
memory, even if the card is full.  
• Take care not to get the contacts of the card dirty.  
Write-protecting your images ----------------------------------------------------  
Move the write-protection switch on the SD memory card  
to LOCK to prevent your still images from being accidentally  
erased or the card from being formatted.  
Note that you cannot shoot images on a locked card because  
no data can be recorded to the card. Unlock the card before  
shooting.  
Note-------------------------------------------------------------------------------------  
You can copy images recorded in the internal memory to the SD memory card.  
(G P.81)  
20  
Charging the Rechargeable Battery  
The rechargeable battery needs to be charged before use.  
Insert the battery into the battery charger, making sure that  
the and markings on the battery match those on the  
battery charger.  
1
• The battery label should face up.  
Caution---------------------------------------------------------------------------------  
Be careful not to reverse the and sides.  
Plug the battery charger into an outlet.  
• Use the battery charger (BJ-10) to recharge the battery.  
2
• Charging starts. Charging status is indicated by the charger lamp as  
shown in the table below. Once charging has finished, unplug the  
battery charger from the power outlet.  
Charger Lamp  
Lit  
Description  
Charging  
Off  
Charging complete  
Flashing  
The battery charger terminal may be soiled or the battery  
charger/battery may be faulty. Unplug the battery charger  
from the power outlet, and remove the battery.  
• The estimated battery charging time is shown below. Depending on  
the battery level, the charging time differs.  
Rechargeable Battery Charging Time  
DB-100  
Approx. 180 min. (25 °C)  
21  
Loading the Rechargeable Battery and SD Memory  
Card  
After recharging the rechargeable battery, load the battery and the SD  
memory card. Be sure the camera is off before removing the battery or  
the SD memory card.  
Open the battery/card cover.  
1
Insert the rechargeable battery and SD memory card.  
• Make sure the SD memory card is facing the right way and then push  
the card all the way in until it clicks.  
2
• When the rechargeable battery is loaded in place, it is locked with  
the hook shown in the figure.  
Logo side  
Close the battery/card cover and  
slide it back into place.  
3
Removing the Rechargeable Battery  
Open the battery/card cover. Release the hook that locks the  
rechargeable battery. The battery is ejected. Pull the battery out of the  
camera. Be careful not to drop the battery when removing it from the  
camera.  
Removing the SD Memory Card  
Open the battery/card cover. Push in the SD memory card and gently  
release to eject it. Pull the card out of the camera.  
22  
Turning the Power On/Off  
Press the POWER button to turn the  
camera on or off.  
When the camera is turned on, a start-up  
sound plays and the picture display turns  
on.  
If the POWER button is pressed when the  
camera is on, the number of files recorded  
on that day is displayed, and then the  
camera turns off. If the date is not set,  
the number of files recorded is displayed  
as [0]. If the date is changed, only the  
number of files recorded after the date  
change is displayed.  
Using the Camera in Playback Mode  
Pressing and holding the 6 (Playback)  
button turns on the camera in playback  
mode, allowing you to start playback at  
once.  
When the camera has been turned on with  
the 6 button, pressing the 6 button  
again switches playback mode to shooting  
mode.  
About Auto Power Off --------------------------------------------------------------  
• If the camera goes unused for a set period of time, it automatically turns itself  
off to save power. (Auto Power Off)  
• The auto power off setting can be changed. (G P. 9 4 )  
Setting the Language, Date and Time  
When the power is turned on for the first time, the language setting  
screen appears (for the picture display language). After setting the  
language, go on to the date/time setting (for printing the date and  
time on your photos).  
23  
Setting the Language  
Press the ADJ./OK button !"NF  
to select a language.  
1
• When the DISP. button is pressed, the  
language setting is canceled and the  
date/time setting screen appears.  
Press the ADJ./OK button.  
• The display language is set, and the date/time setting screen  
appears.  
2
Setting the Date and Time  
Press the ADJ./OK button !"NF to set the year, month,  
date, time and format.  
1
• Change the setting with !" and  
move the item with NF.  
• You can cancel the setting by pressing  
the DISP. button.  
Check the information on the screen and then press the  
ADJ./OK button.  
• The confirmation screen appears.  
2
3
Press the ADJ./OK button.  
• The date and time are set.  
Note-------------------------------------------------------------------------------------  
• If the battery is removed for more than one week, the date and time settings  
will be lost. These settings must be made again.  
• To retain the date and time settings, load a battery with adequate remaining  
power for more than two hours.  
• The language, time and date can be changed at any time in the setup menu.  
(G P.96)  
• The date and time can be inserted into images. (G P. 7 1 )  
24  
Basic Shooting  
Now you are ready.  
Shooting in Auto Shooting Mode (Focus and Shoot)  
Turn the mode dial to 5 to shoot with auto  
shooting mode.  
The shutter release button works in two steps.  
When you press the shutter release button halfway  
(Half-press), the auto-focus function is triggered to  
determine the focal distance. Next, press it all the way down (Full-  
press) to shoot.  
When your subject is not in the center of your composition, compose  
your photo after focusing. (Focus Lock)  
Hold the camera with both hands and  
lightly press both elbows against your  
body.  
1
Put your finger on the shutter release  
button.  
2
Frame the picture with your subject in the AF frame in the  
center of the screen and press the shutter release button  
3
halfway.  
ꢀꢁꢂ (  
• The camera focuses on the subject and the exposure and white  
balance are fixed.  
• The focal distance is measured at a maximum of nine points. Green  
frames appear to indicate the positions that are in focus.  
25  
To take a picture with the subject in the foreground in focus  
against a background, half-press the shutter release button to  
focus on the subject, and then compose your shot.  
4
5
Subject to be focused  
Shooting range  
Gently press the shutter release button all the way.  
•
The still image you have taken appears momentarily on the picture  
display and is recorded to the internal memory or the SD memory card.  
Caution---------------------------------------------------------------------------------  
• When you are shooting, be careful not to obstruct the lens or flash with your  
fingers, hair, or the strap.  
• Do not hold the lens unit. Zoom and focusing will not be performed properly.  
About Focusing-----------------------------------------------------------------------  
The color of the frame in the center of the picture display indicates whether the  
subject is in or out of focus.  
Focus Status  
Frame Color  
White  
Green  
Before focusing  
Subject in focus  
Subject not in focus  
Red (Flashing)  
It may be impossible to bring the following subjects into focus, or they may not  
be in focus even when the frame color is green.  
• Objects that lack contrast, such as the sky, a wall that is only one color, or the  
hood of a car.  
• Flat two-dimensional objects with only horizontal lines and no significant  
protrusions.  
• Quickly moving objects.  
• Things in poorly lit places.  
• Areas with strong backlighting, or reflections.  
• Things that flicker, such as fluorescent lights.  
• Point light sources, such as light bulbs, spotlights, or LEDs.  
When you want to shoot subjects like this, first focus on an object the same  
distance as your subject and then shoot.  
26  
Preventing Camera Shake ---------------------------------------------------------  
• Press the shutter release button gently to prevent camera shake.  
• If you move the camera when pressing the shutter release button, the still  
image might not come out clearly due to camera shake.  
Camera shake tends to occur in the following cases:  
• When shooting in a dark place without using the flash  
• When using the zoom function  
• When shooting using time exposure (G P.69)  
• When the J symbol appears on the picture display, this indicates that  
camera shake may occur. To prevent camera shake, try any of the following.  
• Using the camera shake correction function (G P.70)  
• Setting the flash to [Auto] or [Flash On] (G P. 2 9 )  
• Raising the ISO setting (G P.78)  
• Using the self-timer (G P.30)  
Using the Zoom Function  
Turning the zoom lever toward z  
(Telephoto) allows you to take a close-up  
picture of the subject. Turning the zoom  
lever toward Z (Wide-angle) allows you  
to take a wide-angle picture. The amount  
of zoom is shown by the zoom bar in the  
picture display.  
ꢀꢁꢂ (  
ꢀꢁꢂ (  
Wide-angle Telephoto  
Zoom bar  
Note-------------------------------------------------------------------------------------  
You can also set the focal length of the optical zoom so that it stops at eight  
levels. (G P.93)  
27  
Using the Digital Zoom -------------------------------------------------------------  
While you can use the normal zoom to enlarge the subject up to 10.7 ×, digital  
zooming allows you to enlarge the subject still further (up to another 4.8 × for  
still images, 2.8 × for movies with a frame size of 1280, or 4.0 × for movies with a  
frame size of 640 or 320).  
To use digital zooming, turn and hold the zoom lever toward z until the  
maximum magnification is reached on the zoom bar, then momentarily release  
the zoom lever, and then turn the zoom lever again toward z.  
If [Picture Quality/Size] is set to  
4 : 3 F or  
4 : 3 N, you can also set [Digital  
Zoom Image] to [Auto Resize]. (G P.94)  
Depending on the shooting mode or the settings in the shooting menu, the  
digital zoom cannot be used. (G P.118)  
Shooting Close-Ups (Macro Shooting)  
The macro shooting function lets you take  
shots of subjects that are very close to the  
camera. To shoot close-ups, press the ADJ./  
OK button toward N (Macro). Pressing the  
ADJ./OK button toward N (Macro) again  
cancels macro mode.  
Note-------------------------------------------------------------------------------------  
• During macro shooting, the minimum shooting distance changes depending  
on the zoom position. To display the minimum shooting distance on the screen,  
set [Minimum Distance] to [Show]. (G P.95)  
• [Focus] (G P.67) is set to [Spot AF].  
• Macro mode is not available in some shooting modes. (G P.118)  
• To take a further close-up picture during macro shooting, use [Zoom Macro] in  
scene mode. (G P.51)  
• The minimum shooting distance and shooting range when using the zoom are  
shown below.  
Zoom  
position  
Focal  
Minimum Shooting Shooting Range  
Length (*) Distance (from the  
front of the lens)  
Wide-angle 31 mm  
Approx. 1 cm  
Approx. 28 mm × 21 mm  
300 mm Approx. 28 cm  
Approx. 45 mm × 34 mm  
(when digital zoom is not used)  
Approx. 9.4 mm × 7.0 mm  
(when 4.8× digital zoom is used)  
Telephoto  
1440 mm Approx. 28 cm  
28  
(*) Equivalent to that on a 35 mm camera  
Using the Flash  
You can select the flash mode that best suits your shot. At the time of  
purchase, the camera is set to [Auto].  
Press the ADJ./OK button  
toward F (flash).  
1
• The list of the flash modes symbol  
is displayed on the picture  
display.  
Flash Off  
Auto  
The flash will not fire.  
The flash fires automatically when the subject  
is poorly lit or backlit.  
Red-Eye Flash  
Flash On  
Reduces the red-eye phenomenon, in which  
people’s eyes appear red in pictures.  
The flash fires regardless of the lighting  
conditions.  
Flash Synchro.  
The flash fires with the shutter speed slowed.  
This is useful when taking portrait pictures in  
a nightscape. Camera shake may occur, so the  
use of a tripod is recommended.  
Press the ADJ./OK button !" to select the flash mode.  
• The flash mode symbol is displayed at the upper left of the picture  
display.  
2
• The flash mode symbol blinks at the upper left of the picture display  
when the flash is charging. Once the flash is charged, the symbol  
stops blinking and lights steadily and the camera is ready to shoot.  
Caution---------------------------------------------------------------------------------  
• You cannot shoot when the flash is charging (approx. 5 seconds).  
• After the camera is turned on, it may take longer for the camera to become  
ready for shooting when using the flash.  
29  
Note-------------------------------------------------------------------------------------  
• The flash mode setting is retained until you press the ADJ./OK button toward F  
(Flash) again.  
• The flash does not fire when shooting movies, in continuous mode, in multi-  
target AF, in dynamic range double-shot, and in bracket shooting.  
• You can adjust the light intensity of the flash. (G P.69)  
• The auxiliary flash fires to increase the AE accuracy.  
• The flash can not be used in some shooting modes or with some shooting  
menu options. (G P.118)  
Using the Self-timer  
You can set the self-timer to shoot after either two or ten seconds, or  
you can select [Custom Self-Timer] (G P.69) to customize the self-  
timer setting.  
With the camera ready to shoot, press the t (Self-timer)  
button.  
1
• A list of self-timer mode settings appears on the picture display.  
ꢀꢁꢂ (  
Press the ADJ./OK button !" to  
2
select the mode.  
•
The self-timer symbol and the  
number of seconds are displayed at  
the upper left of the picture display.  
Press the shutter release button.  
3
• When set to [10], the self-timer lamp lights for 8 seconds when the  
self-timer starts and then blinks for the final 2 seconds before the  
picture is taken.  
• When set to [Custom Self-Timer], the self-timer lamp blinks for 2  
seconds before each picture is taken, and pictures are taken at the  
set shooting interval. The focus position is set for the first shot.  
• When set to [Custom Self-Timer], press the MENU button to cancel  
the self-timer during shooting.  
30  
Note-------------------------------------------------------------------------------------  
• The camera remains in self-timer mode even after the image is shot. To cancel  
the self-timer, press the t button and change the self-timer setting to [Self-  
Timer Off].  
• When the self-timer is set to 2 seconds, the self-timer lamp does not light or  
blink.  
• When the self-timer is set, the [Interval Shooting] setting is disabled.  
Shooting in Scene Auto Mode  
In scene auto mode, the camera selects the optimal  
scene mode (G P.50) automatically.  
The following scene modes can be selected.  
Scene Mode  
Portrait  
Refer to  
P.50  
Scene Mode  
Nightscape  
Refer to  
P.50  
Sports  
P.50  
P.50  
Landscape  
P.51  
P.28  
Night. Port.  
Macro Mode  
N
ĵĻĴ Ň  
The icon of the selected scene mode  
is shown in the display. If macro mode  
is selected, an icon will be displayed at  
upper left in the picture display.  
Note-------------------------------------------------------------------------------------  
• For information on the options available in the shooting menu when scene  
auto mode is selected, see P.118.  
• If the camera is unable to select a scene, focus, exposure, and white balance will  
respectively be set to multi AF, multi AE, and multi-pattern auto.  
31  
Playing Back Images  
Viewing Your Images  
To select playback mode, press the 6  
(Playback) button. When the camera is off,  
pressing and holding the 6 (Playback)  
button longer than 1 second turns the  
camera on in playback mode.  
Press the ADJ./OK button NF to display  
the previous file or the next file. Press the  
button !" to display the file 10 frames forward or backward.  
To switch the camera from playback mode to shooting mode, press  
the 6 button again.  
The images played back in playback mode------------------------------------  
ĵĻĴ ŏ  
For information on how to play back files with  
S
symbol, see P.62.  
2010/01/01 00:00  
Thumbnail View  
20 Frames  
If the zoom lever is turned toward 9 (Thumbnail View), the screen is  
divided into 20 frames and thumbnails are displayed.  
ĵĻĴ Ň  
Last File  
2010/01/01 00:00  
Press the DISP. button to change between the thumbnail list and page  
list. In the page list, press the ADJ./OK button !"NF to select the page.  
32  
To view an image full frame, select it in the thumbnail list and press the  
ADJ./OK button or turn the zoom lever once toward 8 (Enlarged View).  
81 Frames  
If the zoom lever is turned toward 9  
when 20 frames are displayed, the screen  
is divided into 81 frames and thumbnails  
are displayed.  
Press the DISP. button to change between  
the thumbnail list and page list. In the  
page list, press the ADJ./OK button  
Thumbnail list  
!"NF to select the page.  
To switch to Single-Picture Display, select  
the file in the thumbnail list and press the  
ADJ./OK button or turn the zoom lever  
twice toward 8 (Enlarged View).  
Page list  
Date of Recording  
If the zoom lever is turned toward 9  
again when 81 frames are displayed, the  
thumbnails are listed by date of recording.  
Press the DISP. button to change between  
the thumbnail list and date list. In the  
date list, press the ADJ./OK button NF  
Thumbnail list  
to select the date, or press the ADJ./OK  
button !" to select the page.  
To switch to Single-Picture Display, select  
the file in the thumbnail list and press the  
ADJ./OK button or turn the zoom lever 3  
times toward 8 (Enlarged View).  
Date list  
33  
Enlarging Images  
Turn the zoom lever toward 8 (Enlarged View) to zoom in on the  
selected still image. The magnification varies depending on the image  
size.  
Image Size  
Enlarged View  
(maximum magnification)  
4 : 3 F  
4 : 3 F  
3.4 ×  
6.7 ×  
16×  
Image sizes other than those above  
Pressing the DISP. button at this point changes the display as follows.  
Last File  
DISP. button  
Pressing the ADJ./OK button  
!"NF at this point moves  
the area displayed.  
Pressing the ADJ./OK button  
!"NF at this point moves  
the area displayed.  
Last File  
Pressing and  
holding the  
DISP. Button  
Pressing and  
holding the  
DISP. Button  
Pressing the ADJ./OK button NF at this point  
displays the previous or next image enlarged.  
When an MP file or a movie is displayed, the  
display returns to the normal size.  
Turn the zoom lever toward 9 (Thumbnail View) to return to the  
original size.  
Note-------------------------------------------------------------------------------------  
• Movies cannot be enlarged.  
• For information on how to enlarge MP files, see P.62–63.  
• Cropped copies (G P.83) can not be zoomed in to the magnifications stated  
above.  
34  
Deleting Files  
You can delete files from the SD memory card or internal memory.  
Note-------------------------------------------------------------------------------------  
You can use the [Recover File] function to restore needed files that you  
accidentally deleted. (G P.81)  
Press the 6 (Playback) button.  
• The last file recorded is displayed.  
1
Press the ADJ./OK button !"NF to display the file you  
want to delete.  
2
• To delete multiple files, you can also turn the zoom lever toward 9  
(Thumbnail View) to display thumbnail view, and then go to Step 3.  
Press the D (Delete) button.  
3
Deleting a File or All Files  
Press the ADJ./OK button !" to  
select [Delete One] or [Delete All].  
4
• You can change the image for  
deletion with the ADJ./OK button NF.  
Press the ADJ./OK button.  
• If [Delete All] is selected, press the ADJ./OK button NF to select [Yes]  
5
and then press the ADJ./OK button.  
35  
Specifying Multiple Files Separately  
Press the ADJ./OK button !" to select [Delete Multi] and  
then press the ADJ./OK button.  
4
• If thumbnail view was displayed in Step 2 on P.35, skip Step 4.  
Press the ADJ./OK button !" to select [Sel. Indiv.] and then  
press the ADJ./OK button.  
5
6
Press the ADJ./OK button !"NF  
to select the file you want to  
delete and press the ADJ./OK  
button.  
• The trash symbol is displayed in the  
upper left corner of the file.  
• Press the MENU button to switch to  
the display for specifying a range of files. See Step 6 and beyond on  
P.37.  
Repeat Step 6 to select all the files you want to delete.  
• If you selected a file by mistake, you can deselect it by selecting the  
file and pressing the ADJ./OK button.  
7
Press the D (Delete) button.  
8
9
Press the ADJ./OK button NF to  
select [Yes] and then press the  
ADJ./OK button.  
36  
Specifying a Range of Multiple Files  
Press the ADJ./OK button !" to select [Delete Multi] and  
then press the ADJ./OK button.  
4
• If thumbnail view was displayed in Step 2 on P.35, skip Step 4.  
Press the ADJ./OK button !" to select [Sel. Range] and  
then press the ADJ./OK button.  
5
6
Press the ADJ./OK button !"NF  
to select the starting point of the  
range of files you want to delete  
and press the ADJ./OK button.  
• If you make a mistake when selecting  
the starting point for the range of  
files, press the DISP. button to return  
to the screen for selecting the starting point.  
• Press the MENU button to switch to the display for specifying files  
separately. See Step 6 and beyond on P.36.  
Press the ADJ./OK button !"NF  
to select the ending point of the  
range of files you want to delete  
and press the ADJ./OK button.  
• The trash symbol is displayed in the  
upper left corner of the specified files.  
7
8
Repeat Steps 6 and 7 to specify all the ranges of files you  
want to delete.  
Press the D (Delete) button.  
9
10  
Press the ADJ./OK button NF to select [Yes] and then press  
the ADJ./OK button.  
37  
Changing the Display with  
the DISP. Button  
Pressing the DISP. button allows you to change the screen display  
mode and toggle the information displayed on the picture display.  
During Shooting Mode  
Normal Symbol Display  
Histogram Display  
Grid Guide Display  
Picture Display Off  
No Display  
(Synchro-Monitor Mode)  
Grid Guide Display-------------------------------------------------------------------  
• This displays auxiliary lines on the picture display to help you compose your  
picture. These lines are not recorded with images.  
• Use [Grid Guide Display Options] on the setup menu to select the grid.  
(G P.95)  
Synchro-Monitor Mode-------------------------------------------------------------  
This turns the picture display off except when the camera is operated. This is  
effective for saving power consumption. In this mode, pressing the shutter release  
button halfway turns the picture display on. Subsequently, pressing the shutter  
release button fully displays the shot image on the picture display and then turns  
the picture display off. (This setting is different from [LCD Auto Dim] in the setup  
menu.)  
38  
Note-------------------------------------------------------------------------------------  
• When [Shooting Info. Display Frame] is set to [On] in the setup menu, the  
shooting information display frame can be displayed for normal symbol display  
and histogram display. (G P.95)  
●
• Histograms are not displayed in movie mode. A blinking [ REC] icon, the  
recording time, and the time available are displayed during recording even  
when indicators are hidden or the grid guide is displayed.  
• When [Level Setting] is set to [Display] or [Display+Sound] (G P.40), the level  
indicator is displayed during normal symbol display and histogram display.  
(G P.41)  
• If any of the following operations is performed, the picture display turns on  
even when it is turned off.  
• When the ADJ./OK button, MENU button, DISP. button, or 6 (Playback)  
button is pressed.  
• When the zoom lever is turned.  
• When the ADJ./OK button is pressed !" during manual focus. (G P.73)  
During Playback Mode  
Normal  
Symbol  
Display  
Histogram  
and Detailed  
Information Display  
2010/01/01 00:00  
2010/01/01 00:00  
White Saturation  
Highlights Display  
(only if [White  
Saturation Display]  
is set to [On])  
No  
Display  
2010/01/01 00:00  
White Saturation Highlights Display--------------------------------------------  
• If [White Saturation Display] is set to [On] in the setup menu (G P.95),  
pressing the DISP. button while the histogram and detailed information are  
displayed switches to the highlight display.  
•
The white saturation areas of the image flash in black. White saturation is the loss  
of tone that indicates the color shading in an image in which very bright areas of  
the subject are rendered in white. An image with a loss of image tone cannot be  
edited later. It is recommended that you shoot another image by changing the  
composition or by setting the exposure level lower (–). (G P. 7 6 )  
• The white saturation highlights display is for reference only.  
39  
About the Electronic Level  
When [Level Setting] is turned on in the setup menu or by pressing  
and holding the DISP. button, the camera uses a level indicator  
and level sound to let you know whether the image is level during  
shooting. The level indicator is displayed during normal symbol display  
and histogram display.  
This is useful for keeping the image level when taking pictures of  
scenery or buildings. This is also very useful for taking pictures with the  
horizon visible.  
Available Settings  
Off  
Display  
Description  
The level indicator will not display. The level sound will not emit.  
The level indicator will display. The level sound will not emit.  
*Default setting  
Display + Sound  
The level indicator appears on the screen and a level sound is  
emitted when the image is level.  
Sound  
The level indicator will not display. A level sound is emitted  
when the image is level.  
Select [Level Setting] in the setup  
menu (G P.92) and press the  
ADJ./OK button F.  
1
• You can also press and hold the DISP.  
button in shooting mode to display  
the setting menu.  
Press the ADJ./OK button !" to select the setting and then  
press the ADJ./OK button.  
2
40  
Level indicator display  
When level:  
The level indicator becomes green,  
indicating that the scale is in the middle.  
Green  
When tilted to the right or left:  
The mark on the level indicator becomes  
orange, indicating the opposite side of the  
direction in which the camera is tilted.  
Orange  
When the camera is tilted too far to the  
right or left:  
Half of the level indicator on the opposite  
side of the direction in which the camera  
is tilted becomes red. The mark on the  
level indicator is not displayed.  
Red  
When the camera is tilted too far forward  
or backward, or it cannot be determined  
whether the camera is level:  
Red  
The top and bottom of the level indicator  
become red. The mark on the level  
indicator is not displayed.  
When the camera is held vertically:  
When shooting with the camera positioned vertically, the level function  
can be used to determine whether the image is vertically level (the level  
indicator appears in a different place).  
Caution---------------------------------------------------------------------------------  
• During grid guide display, no display, or when the picture display is turned off  
(G P.38), the level sound is emitted, but the level indicator is not displayed.  
When [Level Setting] is set to [Display+Sound], only the level sound is emitted.  
• The level function is not available if the camera is held upside down, when  
recording movies, and during interval shooting.  
• The level function becomes less accurate when the camera is moving or when  
shooting in an environment subject to moving, such as on a amusement ride.  
• No level sound is emitted when [Level Setting] is set to [Display+Sound] or  
[Sound] and [Volume Settings] is set to [ꢀꢀꢀ] (Mute). (G P.94)  
• Use this function as a reference to see if images are level when shooting  
images. The accuracy of the level when using the camera as a level cannot be  
guaranteed.  
41  
About the Histogram Display  
When Histogram is on, a histogram  
appears in the lower right corner on the  
picture display. A histogram is a graph  
indicating the number of pixels on the  
vertical axis and the brightness on the  
horizontal axis (from left to right, shadows  
(dark areas), midtones, and highlights  
(bright areas)).  
By using the histogram, you can determine the brightness of an image  
without being affected by the brightness around the picture display.  
This also helps you correct for areas that are overly bright or dark.  
If the histogram has only peaks on the  
right side, this picture is overexposed  
with too many pixels only for highlight  
sections.  
If the histogram has only peaks on the left  
side without anything else, this picture  
is underexposed with too many pixels  
only for shadow sections. Refer to this  
histogram when correcting the exposure.  
Note-------------------------------------------------------------------------------------  
• The histogram displayed on the picture display is for reference only.  
• After taking a picture, you can correct its brightness and contrast by making  
adjustments to the histogram. (G P. 8 6 )  
• Depending on the shooting conditions (use of the flash, dark surrounding light,  
etc.), the exposure level indicated in the histogram may not correspond to the  
brightness of the shot image.  
• Exposure compensation has its limitation. It does not necessarily achieve the  
best possible result.  
• A histogram with peaks in the center may not necessarily provide the best result  
to suit your particular requirements. For example, an adjustment is required if  
you want to underexpose or overexpose the image.  
• For information on how to correct the exposure compensation, see P.76.  
42  
Advanced  
Operations  
Read this section when  
you want to learn more  
about the different camera  
functions.  
1
2
3
4
5
6
7
8
9
10  
1
2
ADJ. Button Functions ...................44  
Using the Fn (Function) Button  
........................................................46  
3
4
5
6
7
8
9
Shooting Mode Types.....................50  
Playback Functions ........................62  
Shooting Menu...............................66  
Playback Menu...............................79  
Setup Menu ....................................92  
Direct Printing................................99  
Downloading Images to Your  
Computer .....................................103  
10 Appendices...................................112  
Instructions in this manual to "Press the ADJ./OK button !"NF"  
indicate that you should press the ADJ./OK button in the up, down, left  
or right direction. Instructions to "Press the ADJ./OK button" indicate  
that you should press directly down on the button.  
1
ADJ. Button Functions  
The ADJ./OK button has the following functions. For the operating  
procedure of each function, see the corresponding reference page.  
Assigning four functions from the shooting menu  
Shifting the AE and AF targets  
1
2
1
Selecting Shooting Menu Options Assigned  
to the ADJ./OK Button  
You can assign four functions from the shooting menu to the ADJ./OK  
button. The fifth function is fixed to AE/AF target shift (G P.45) and  
cannot be changed.  
By using the ADJ./OK button, you can make settings with fewer  
button operations and without displaying the shooting menu. This is  
convenient for frequently used functions.  
Set the functions you want to assign to the ADJ./OK button  
with [ADJ Button Setting 1/2/3/4] on the setup menu.  
1
• At the time of purchase, four of the functions are assigned. You can  
change the assigned functions.  
Press the ADJ./OK button in  
shooting mode.  
2
• The ADJ. mode screen appears.  
AE/AF  
AF  
AE  
Off  
Move Slctn  
Finish  
Press the ADJ./OK button NF to select the desired item.  
3
4
Press the ADJ./OK button !" to select the setting and then  
press the ADJ./OK button to confirm the setting.  
Note-------------------------------------------------------------------------------------  
• For functions that can be assigned to the ADJ./OK button, see P.120.  
• Press the MENU button in the ADJ. mode to display the shooting menu.  
44  
Shifting the AE and AF Targets  
You can shift the target for automatic exposure (AE) and/or auto focus  
(AF).  
Available Setting Description  
AE/AF  
AE and AF are set to Spot AE and Spot AF respectively and the  
target can be moved for both simultaneously. (The targets for  
Spot AE and Spot AF occupy the same position.)  
1
AF  
The AF is set to Spot AF and the target can be moved. The  
exposure metering is set to the mode selected in [Exposure  
Metering] in the shooting menu. (G P.68)  
AE  
The AE is set to Spot AE and the target can be moved. The focus  
is set to the mode selected in [Focus] in the shooting menu.  
(G P.67)  
Turn the mode dial to 5/Q /R and then press the ADJ./  
OK button.  
1
2
3
Press the ADJ./OK button NF to  
select P  
.
Press the ADJ./OK button !" to  
select the setting and then press  
the ADJ./OK button.  
AE/AF  
AF  
AE  
Off  
Move Slctn  
Ok  
• The target shift screen appears.  
Press the ADJ./OK button !"NF  
to position the target over the  
subject that will be used to set  
focus or exposure.  
4
• Pressing the DISP. button returns the  
display to the screen in Step 2.  
Select  
Ok  
Press the ADJ./OK button.  
5
6
Press the shutter release button halfway and then gently  
press it the rest of the way down.  
Note-------------------------------------------------------------------------------------  
• In scene mode or movie mode, you can select the macro target.  
changes to  
P
the  
.
U
• If the macro target shift function is activated using the Fn button (G P.47) and  
not canceled, will not be displayed.  
P
•
This function is available when [Focus] (G P.67) is set to [Multi AF] or [Spot AF].  
45  
2
Using the Fn (Function) Button  
When a function is assigned to the Fn (Function) button with [Set Fn  
Button] on the setup menu (G P.47), you can easily switch from one  
function to another simply by pressing the Fn button.  
The following functions can be assigned to the Fn button. For  
the operating procedure of each function, see the corresponding  
reference page.  
Available Setting Description  
Refer to  
2
Macro Target  
Moves the AF target without moving the camera to P.47  
shoot close-ups.  
AE Lock  
Locks the exposure.  
P.48  
AF/Face Pr. AF  
AF/Cont. AF  
AF/M-trgt AF  
AF/MF  
Switches between autofocus (*1) and face-priority AF. P.49  
Switches between auto focus (*2) and continuous AF. P.49  
Switches between auto focus (*3) and multi-target AF.  
P.49  
Switches between auto focus (  
*
) and manual focus. P.49  
3
3
AF/Snap  
Switches between auto focus (  
*
) and snap mode.  
P.49  
—
Step Zoom, AT-BKT, Switches between on and off for each function.  
WB-BKT, CL-BKT,  
FOCUS-BKT  
(
(
(
1)[Multi AF], [Spot AF] or [Continuous AF]  
*
2)[Multi AF], [Spot AF] or [Face-Pri. AF]  
*
*
3)[Multi AF], [Spot AF], [Face-Pri. AF] or [Continuous AF]  
Note-------------------------------------------------------------------------------------  
• For information on the items that can be assigned in each shooting mode, see  
P.120.  
• The Fn button can not be used for the selected function when [Miniaturize]  
(G P.53) is selected in scene mode.  
• Pressing the Fn button in playback mode displays the image assigned with  
[Flag Function Setting]. For the operating procedure, see P.82.  
• Selecting [Trim], [Level Compensation] (when [Manual] is selected), or [White  
Balance Compensation] on the playback menu, and pressing the Fn button  
displays the screen that describes the operating procedure. (G P.83, 85, 87)  
46  
Assigning a Role to the Fn Button  
To assign functions to the Fn button, follow the steps below.  
Select [Set Fn Button] in the setup  
menu (G P.92) and press the  
1
ADJ./OK button F.  
Select the setting and then press  
the ADJ./OK button.  
2
2
Shifting the AF Target for Macro Shooting  
You can select the focus target for close-ups.  
Set [Set Fn Button] to [Macro Target] on the setup menu.  
1
2
With the camera ready to shoot,  
press the Fn button.  
• The macro target shift screen appears.  
Press the ADJ./OK button !"NF to move the cross-mark  
to the desired target position.  
3
Press the ADJ./OK button.  
• Pressing the DISP. button cancels the macro target shift function.  
4
Press the shutter release button halfway and then gently  
press it the rest of the way down.  
5
• The camera focuses on the area at the position of the cross-mark.  
• Pressing the ADJ./OK button toward N (Macro) cancels the macro  
target shift function.  
Note-------------------------------------------------------------------------------------  
If the AE/AF target shift function is activated using the ADJ./OK button (G P.45)  
and not canceled, the macro target shift function cannot be used by pressing the  
Fn button.  
47  
Locking the Exposure  
Assigning [AE Lock] to the Fn button (G P.47) and then pressing the  
Fn button during shooting allows you to lock or cancel the exposure.  
Set [Set Fn Button] to [AE Lock] on the setup menu.  
• For the operating procedure, see P.47.  
1
With the camera ready to shoot, position subject in the  
center of the picture display and press the Fn button.  
2
• The exposure is locked and the AEL  
mark, aperture value, and shutter  
speed appear on the screen.  
2
• Pressing the Fn button again cancels  
the AE lock.  
Note-------------------------------------------------------------------------------------  
• The AE lock function cannot be used in movie mode.  
• The AE lock function can only be used when [Time Exposure] is set to [Off].  
48  
Choosing a Focus Setting  
If any of the following functions is assigned to the Fn button (G P.47),  
you can change the focus setting during shooting by pressing the Fn  
button.  
Available Setting Description  
AF/Face Pr. AF  
AF/Cont. AF  
AF/M-trgt AF  
AF/MF  
Switch between multi, spot, or continuous AF and face-priority  
AF (G P.67).  
Switch between multi, spot, or face-priority AF and continuous  
AF.  
Switch between multi, spot, face-priority, or continuous AF  
and multi-target AF.  
Switch between multi, spot, face-priority, or continuous AF and  
manual focus.  
2
AF/Snap  
Switch between multi, spot, face-priority, or continuous AF and  
snap AF.  
Caution---------------------------------------------------------------------------------  
The Fn button only be used to switch between the listed modes. If another focus  
mode is selected, pressing the Fn button has no effect.  
49  
3
Shooting Mode Types  
Scene Mode (SCENE)  
In scene mode, you can choose from one of the following 13 subject  
types. Camera settings are automatically optimized for the selected  
subject type.  
Scene Modes  
ꢀꢁꢂ  
(
Use for portraits. The camera  
automatically detects up to eight  
faces, and adjusts focus, exposure,  
and white balance. The faces  
Portrait  
detected by the camera are shown  
by square borders.  
3
The camera may not be able to recognize faces in the following  
cases:  
• When the face is side-view, tilted, or moving  
• When the camera is tilted or upside down (the shutter release  
button is facing down)  
• When the face is partially hidden or at the edge of the frame  
• When the face is not clearly visible because of dark  
surroundings  
• When the subject is too far away (Make sure that the face  
appearing in the picture display is vertically longer than one  
block marked by the grid guide. G P.38)  
Use when taking pictures of moving objects.  
Sports  
Pets  
Use to photograph cats and other pets. The flash (G P.29), AF  
auxiliary light (G P.93), and speaker (G P.94) turn off and flash,  
AF auxiliary light, and sound settings can not be adjusted.  
Use when taking portrait pictures against a nightscape. The flash  
fires automatically. The shutter speed slows down, so be careful of  
camera shake.  
Night. Port.  
Nightscape  
Use when shooting night scenes. In nightscape mode, the flash  
fires when all of the following conditions are satisfied:  
• The flash is set to [Auto].  
• The flash is determined to be necessary because it is dark.  
• There is a figure or another object nearby.  
50  
Use to create pictures that appear to be photos of dioramas. For  
detailed operations, see P.53.  
Miniaturize  
Landscape  
High Sens  
Use when taking scenery pictures with abundant greenery or blue  
sky.  
Use when taking pictures in dimly lit places. The picture display  
also becomes brighter.  
Use to create black-and-white images with higher contrast than  
those normally produced using black and white (G P.68).  
Produces grainy images similar to those taken with highly sensitive  
film or high gain film processing.  
High Contrast  
B&W  
Use where lights and sounds emitted by the camera may be  
unwelcome. The flash (G P.29), AF auxiliary light (G P.93), and  
speaker (G P.94) turn off and flash, AF auxiliary light, and sound  
settings can not be adjusted.  
The camera automatically zooms to the optimal zoom position  
to shoot at a higher magnification than in normal macro  
shooting. Optical zoom can not be used. Macro mode is selected  
automatically.  
Use when capturing text images, for example notes written on a  
whiteboard at a meeting. Images are captured in black and white.  
You can set the image size to either [ 4 : 3] or [ 4 : 3].  
(G P.67)  
3
Discreet Mode  
Zoom Macro  
Text Mode  
Reduce the effects of perspective when photographing  
rectangular objects, such as message boards or business cards. For  
detailed operations, see P.55.  
Skew Correct  
Mode  
In skew correction mode, choose from [ 4 : 3 F] or [ 4 : 3 F]  
for [Picture Quality/Size]. (G P. 6 7 )  
51  
Caution---------------------------------------------------------------------------------  
• In [Pets] or [Discreet Mode]:  
• The beep does not sound.  
• Pressing the ADJ./OK button to F (flash) does not change the flash mode.  
(G P.29)  
• The self-timer lamp will not blink and a beep will not sound in self-timer  
mode. (G P.30)  
• When using [Zoom Macro], you can shoot close-ups within the following  
distances:  
Focal  
Minimum Shooting Shooting Range  
Length (*) Distance (from the  
front of the lens)  
70 mm  
Approx. 1 cm  
Approx. 19 mm × 14 mm  
(when digital zoom is not used)  
Approx. 4.0 mm × 3.0 mm  
3
335 mm  
Approx. 1 cm  
(when 4.8 × digital zoom is used)  
(*) Equivalent to that on a 35 mm camera  
Selecting a Scene Mode  
Turn the mode dial to SCENE.  
1
ĵĻĴ Ň  
• The camera is ready to shoot and the  
selected scene mode is displayed at  
the top of the picture display.  
Press the MENU button to change  
the scene mode.  
• The scene mode selection screen  
appears.  
2
3
Select a scene mode.  
52  
Press the ADJ./OK button.  
• The scene mode type is displayed at the top of the picture display.  
4
5
Press the shutter release button to shoot the picture.  
Changing the shooting menu or setup menu setting in scene mode ----  
Press the MENU button in shooting mode and then press the ADJ./OK button N  
to select [MODE] tab.  
Shooting in Miniaturization Mode  
This mode creates pictures that appear to be photos of dioramas. It is  
most effective when pictures are taken from a high vantage point.  
Select [Miniaturize] in the scene mode menu and press the  
ADJ./OK button.  
1
3
Press the Fn button.  
• The miniaturization setting screen  
appears.  
2
• The areas that will not be in focus in  
the final photograph are shown in  
gray.  
• Press the DISP. button to exit without  
taking a picture.  
Note-------------------------------------------------------------------------------------  
When taking pictures in tall orientation, press  
the D button to re-orient the area that will  
be in focus.  
Press the ADJ./OK button !" to  
reposition the area that will be in  
focus.  
3
• For help, press the Fn button. Press  
the Fn button again to clear help from  
the display.  
53  
Press the ADJ./OK button NF to  
choose the width of the area that  
will be in focus.  
4
Press the ADJ./OK button.  
5
6
Frame a picture and press the shutter release button  
halfway to focus, then press the shutter release button the  
rest of the way down to take the picture.  
Caution---------------------------------------------------------------------------------  
The focus of the final image differs slightly from that in the image displayed  
immediately after shooting.  
3
54  
Using Skew Correction Mode  
Select [Skew Correct Mode] in the scene mode menu and  
press the ADJ./OK button.  
1
Press the shutter release button to shoot the picture.  
2
• The display indicates that the image is being processed, and then  
the area recognized as the correction range is displayed with an  
orange frame. Up to five areas can be recognized.  
• If the target area cannot be detected, an error message appears. The  
original image remains unchanged.  
• To select another correction area, move the orange frame to the  
target area by pressing the ADJ./OK button F.  
• To cancel skew correction, press the ADJ./OK button !. Even if you  
cancel skew correction, the original image remains unchanged.  
3
Press the ADJ./OK button.  
• The display indicates that the image is being corrected, and then the  
corrected image is recorded. The original image remains unchanged.  
3
Note-------------------------------------------------------------------------------------  
You can also correct the skew of a previously shot still image. (G P. 8 8 )  
Caution---------------------------------------------------------------------------------  
When [Skew Correct Mode] is selected, note the following:  
• To shoot the subject as large as possible, position it so that the entire portion  
of the subject is visible on the picture display.  
• The camera may fail to recognize the subject in the following cases:  
• When the image is out of focus  
• When four edges of the subject are not clearly visible  
• When it is hard to distinguish between the subject and background  
• When the background is complicated  
• Two images, one before correction and the other after correction, are  
recorded. If the number of remaining shots is less than two, you cannot shoot  
the subject.  
• The correction area may not be detected properly if the [Date Imprint]  
function is activated.  
55  
Dynamic Range Double Shot Mode (Q )  
The "dynamic range" of a digital camera refers to  
the range of brightness that can be processed by  
the camera.  
When you set the mode dial to Q and shoot, the  
scene is reproduced with a smooth transition from  
the bright areas to the dark areas, allowing you to capture a more  
natural-looking image.  
Note-------------------------------------------------------------------------------------  
With dynamic range double shot, two consecutive pictures are taken with  
different exposures and then the areas with the appropriate exposure are  
combined together. This mode uses a longer shooting time than other modes,  
so be careful of camera shake when taking pictures. The J symbol is always  
displayed.  
3
Two consecutive shots  
Combined and saved  
Caution---------------------------------------------------------------------------------  
• Dynamic range double shot may not be effective if the shooting location is  
overly bright or dark.  
• [Multi] metering is recommended. (G P. 6 8 )  
• When shooting a fast-moving subject, the subject may be distorted in the  
recorded image.  
• Flicker from fluorescent lights may appear as horizontal bands. Fluorescent  
lighting may also affect colors and brightness.  
56  
Dynamic Range Expansion Effect  
The [Dynamic Range Expansion] option  
in the shooting menu offers five levels of  
dynamic range expansion: [Auto], [Very  
Weak], [Weak], [Medium], and [Strong].  
The stronger the expansion effect,  
the wider the range of brightnesses  
processed by the camera.  
To adjust dynamic range expansion settings, turn the mode dial to Q  
and then select an option for [Dynamic Range Expansion] in the  
shooting menu.  
If an option other than [Auto] is  
3
highlighted when you press the ADJ./OK  
button F, the menu shown at right will be  
displayed. Choose the tone range given  
priority for expanded dynamic range from  
[Highlights], [Shadows], and [Off].  
Dynamic Range Expansion Plus Normal Shooting  
When [On] is selected for [Plus Normal Shooting] in the shooting  
menu, the camera will record two copies of each photo: one with an  
expanded dynamic range and the other with normal exposure. The  
two copies are displayed in the picture display after shooting, with the  
unmodified copy on the right and the copy with an expanded dynamic  
range of the left.  
To turn this option on or off, turn the mode dial to Q and then select  
an option for [Plus Normal Shooting] in the shooting menu.  
Note-------------------------------------------------------------------------------------  
Histograms of the images are displayed after shooting. When [LCD Confirmation  
Time] is set to [Hold] (G P.94), the confirmation screen remains displayed so  
you can confirm the histograms and easily compare the images.  
57  
Continuous Mode (R )  
Turn the mode dial to R to use the various  
continuous shooting functions. Continuous  
mode can be selected from the continuous mode  
selection dialog displayed when the MENU button  
is pressed.  
Continuous Modes  
This is the normal continuous mode. Pictures continue to be taken  
for as long as you hold down the shutter release button. Images are  
recorded one at a time, just as in normal shooting. The number of  
images that can be shot in continuous mode depends on the image  
size setting (G P.67).  
Normal  
Continuous  
Mode  
3
The camera shoots while the shutter-release button is pressed, but  
only the last 15 frames (about the last three seconds of shooting) are  
recorded to create a single multi-picture (MP) file. (G P.59)  
M-Cont Plus  
(10M)  
The camera shoots while the shutter-release button is pressed, but  
only the last 26 frames (about the last 0.9 seconds of shooting) are  
recorded to create a single multi-picture (MP) file. (G P.60)  
M-Cont Plus  
(2M)  
While the shutter-release button is pressed, the camera shoots up to  
120 frames at about 60 frames per second and groups them together  
in a single MP file. About 2 s are required to shoot the entire sequence.  
(G P.60)  
Speed Cont  
(Low)  
While the shutter-release button is pressed, the camera shoots up  
to 120 frames at about 120 frames per second and groups them  
together in a single MP file. About 1 s is required to shoot the entire  
sequence. (G P.60)  
Speed Cont  
(High)  
Caution---------------------------------------------------------------------------------  
Recording times may increase when internal memory is used.  
Changing settings on the shooting menu or setup menu during  
continuous mode --------------------------------------------------------------------  
Press the MENU button in shooting mode and then press the ADJ./OK button N  
to select [MODE] tab.  
58  
Note-------------------------------------------------------------------------------------  
• The flash cannot be used.  
• The camera shake correction function cannot be used. If you set the mode dial  
to R while the camera shake correction function is enabled, E disappears  
from the picture display.  
• Focus, exposure value, and white balance are locked.  
• ISO sensitivity is raised.  
• Flickering may be recorded as horizontal bands when pictures are taken under  
fluorescent lights.  
• When [Card Sequence No.] is set to [On] (G P.96) and the last four digits of  
the file number exceed“9999”during continuous shooting, a separate folder  
is created in the SD memory card and successive pictures taken in continuous  
mode are stored in this folder.  
3
MP file ----------------------------------------------------------------------------------  
MP is a file format for recording a set of still images.  
M-Cont Plus (10M)  
In this mode, the camera shoots while the shutter-release button is  
pressed, but only the last 15 frames (about the last three seconds of  
shooting) are recorded to create a single multi-picture (MP) file.  
When you remove your finger  
from the shutter release button...  
…the camera records the 15 frames taken  
in the last 3s of shooting.  
Caution---------------------------------------------------------------------------------  
The time needed to record 15 frames may increase if lighting is poor.  
Note-------------------------------------------------------------------------------------  
• The image size is fixed at  
4 : 3 N.  
• The date and orientation of each shot in the sequence are recorded separately.  
59  
M-Cont Plus (2M)  
In this mode, the camera shoots while the shutter-release button is  
pressed, but only the last 26 frames (about the last 0.9 seconds of  
shooting) are recorded to create a single multi-picture (MP) file.  
When you remove your finger  
from the shutter release button...  
…the camera records the 26 frames taken  
in the last 0.9 seconds of shooting.  
3
Caution---------------------------------------------------------------------------------  
• When shooting a fast-moving subject, the subject may be distorted in the  
recorded image.  
• Date imprint is not available.  
Note-------------------------------------------------------------------------------------  
• The image size is fixed at  
4 : 3 N.  
• The date and orientation of the last shot in the sequence are also used for the  
remaining frames.  
Speed Cont (Low)/Speed Cont (High)  
120 consecutive images are recorded in one second (Speed Cont  
(High)) or two seconds (Speed Cont (Low)).  
Caution---------------------------------------------------------------------------------  
When shooting a fast-moving subject, the subject may be distorted in the  
recorded image.  
Note-------------------------------------------------------------------------------------  
• The image size is fixed at  
4 : 3 N.  
• The date and orientation of the last shot in the sequence are also used for the  
remaining frames.  
60  
Movie Mode (3)  
Shooting Movies  
You can shoot movies with sound. You can select  
the frame size (G P.67). Each movie you shoot is  
recorded as an AVI file.  
Press the shutter release button to start recording.  
●
The [ REC] icon will blink.  
The recording time and time available are displayed during recording.  
Press the shutter release button again to end recording.  
Caution---------------------------------------------------------------------------------  
• While shooting movies, operation sounds may be recorded.  
3
• Movies may be up to 29 minutes in length. Depending on the type of memory  
card used, shooting may end before this length is reached. The maximum total  
length of all movie files that can be stored depends on the capacity of the  
memory card. (G P.124)  
• When shooting a fast-moving subject, the subject may be distorted in the  
recorded image.  
• Flickering may be recorded as a horizontal band when shooting under  
fluorescent lights.  
Note-------------------------------------------------------------------------------------  
• The camera shoots movies at 30 frames per second.  
• The remaining recording time may not change uniformly because it is  
recalculated from the remaining memory capacity during movie recording.  
• Depending on the remaining battery level, the battery may become depleted  
during movie shooting. Use of a battery with adequate remaining power is  
recommended.  
• Use of a high speed SD memory card with sufficient memory is recommended  
when shooting for long periods.  
61  
4
Playback Functions  
Playing Back Movies  
To play back movies, follow the steps below.  
ķĵı  
ıııĮıııIJ ıııIJİĺĺĺĺ  
Select the movie you want to play  
back in playback mode.  
1
Press the ADJ./OK button.  
2
• Playback begins. The elapsed  
playback indicator or the elapsed time  
is displayed on the screen.  
IJıĻıĶ  
Start  
2010/01//01 00:00  
Fast Forward  
Rewind  
Pause/Playback  
Slow Playback  
Slow Rewind  
Next Frame  
Turn the zoom lever toward z during playback.  
Turn the zoom lever toward Z during playback.  
Press the ADJ./OK button.  
Turn and hold the zoom lever toward z during pause.  
Turn and hold the zoom lever toward Z during pause.  
Turn the zoom lever toward z during pause.  
Turn the zoom lever toward Z during pause.  
Press the ADJ./OK button !" during playback.  
4
Previous Frame  
Volume Adjustment  
Playing Back MP Files  
When you shoot one still image with M-Cont Plus, Speed Cont, or  
Multi-trgt AF, the image is recorded as one MP file. Use the following  
method to play back MP files.  
Note-------------------------------------------------------------------------------------  
• Images shot in normal continuous mode can be played back in the same way  
as normal still images.  
• The focus position is displayed for multi-target AF shooting.  
ĵĻĴ ŏ  
Display the MP file you want to  
play back in playback mode.  
1
• The MP file is displayed with the S  
symbol.  
2010/01/01 00:00  
62  
The display changes as follows.  
2
ĵĻĴ  
ŏ
Display for Step 1  
• Press the DISP. button to change between "Normal" and  
"No Display".  
• The images cannot be enlarged even if the zoom lever  
is turned toward 8 (Enlarged View). The images are  
displayed in thumbnail view.  
• The other operations are the same as those for normal  
still images.  
2010/01/01 00:00  
8
9
9
ADJ./OK  
ĵĻĴ ŏ  
Thumbnail view  
• The MP file images are displayed in thumbnail view.  
• Press the ADJ./OK button !"NF to select a frame.  
• The DISP. button is disabled.  
2010/01/01 00:00  
8
ADJ./OK  
ĵĻĴ  
ŏ
Single frame view  
4
• This displays the frame selected on the thumbnail view.  
• Turn the zoom lever toward 8 (Enlarged View) to  
display enlarged view.  
2010/01/01 00:00  
ADJ./OK  
ĵĻĴ ŏ  
Displaying Slide Shows  
• Images are displayed automatically in the order they  
were consecutively shot, starting with the displayed  
frame.  
Stop  
• The operations during slide show are shown below.  
Pause/Playback Press the ADJ./OK button.  
Fast Forward  
Rewind  
Turn and hold the zoom lever toward z during playback.  
Turn and hold the zoom lever toward Z during playback.  
Turn and hold the zoom lever toward z during pause.  
Turn and hold the zoom lever toward Z during pause.  
Turn the zoom lever toward z during pause.  
Turn the zoom lever toward Z during pause.  
Press the ADJ./OK button N.  
Slow Playback  
Slow Rewind  
Next Frame  
Previous Frame  
First Frame  
Last Frame  
Press the ADJ./OK button F.  
To play back files other than MP files, return to Step 1 and  
press the ADJ./OK button !"NF.  
3
63  
Caution---------------------------------------------------------------------------------  
•
The [DPOF], [Trim], [Resize], [Skew Correction] (playback mode), [Level Compensation],  
and [White Balance Compensation] functions are not available for MP files.  
•
[Flag Function Setting] and [Protect] cannot be set for individual frames in an MP file. If  
[Flag Function Setting] or [Protect] is set when the thumbnail view or single image view  
is displayed, the setting will be applied to the MP file instead of an individual frame.  
• The individual images in a MP file can not be deleted separately.  
MP file ----------------------------------------------------------------------------------  
MP is a file format for recording a set of still images.  
Exporting MP Files  
You can extract selected frames from an MP file and save each frame as  
an individual still image.  
Note-------------------------------------------------------------------------------------  
• The MP file is displayed with the S symbol.  
4
• The images are saved in the same sizes used for shooting.  
• The original files will be retained after extraction.  
• The focus positions for images shot using multi-target AF will not be displayed  
on extracted images.  
To export MP files, display the MP file which you want to export in  
playback mode, and then press the MENU button to display the  
playback menu and select [Export Still Images].  
If [1 Frame] is selected, you can select a  
frame for export by pressing the ADJ./OK  
button NF.  
Select [All Frames] to export all frames in  
the selected MP file.  
Selecting Multiple Frames  
If [Sel Mult] is selected, select multiple  
individual frames or a range of frames.  
64  
To select multiple individual frames:  
Select [Sel. Indiv.] and press the ADJ./OK button.  
1
2
Select a frame and press the ADJ./OK button.  
• Press the MENU button to switch to the display for specifying a  
range of frames.  
• If you selected a frame by mistake, you can deselect it by selecting  
the frame and pressing the ADJ./OK button.  
• Select all the frames which you want to export.  
Press the Fn button, select [Yes] and press the ADJ./OK  
button.  
3
To select two frames and all frames between them:  
Select [Sel. Range] and press the ADJ./OK button.  
1
2
Select the first frame and press the ADJ./OK button.  
• Press the MENU button to switch to the display for specifying frames  
separately.  
4
• If you make a mistake when selecting the starting point for the  
range of frames, press the ADJ./OK button to return to the screen for  
selecting the starting point.  
Export Stiill Immages  
Select the last frame and press  
the ADJ./OK button.  
3
• Repeat Steps 2 and 3 to select  
multiple ranges.  
Start  
Cancel  
Press the Fn button, select [Yes] and press the ADJ./OK  
button.  
4
Note-------------------------------------------------------------------------------------  
[Sel. Indiv.] and [Sel. Range] can be selected directly if [Export Still Images] is  
chosen in thumbnail view.  
65  
5
Shooting Menu  
The shooting menu is used to adjust camera settings when taking  
pictures. To display the shooting menu, press the MENU button when  
the camera is in shooting mode.  
Using the Menu  
Press the MENU button in  
shooting mode.  
1
• The shooting menu is displayed.  
• In scene mode or continuous  
mode, press the ADJ./OK button  
N to select [MODE] tab, and then  
press the ADJ./OK button ". The  
shooting menu appears.  
Indicates the range of displayed  
screens.  
Press the ADJ./OK button !" to  
select the desired menu item.  
2
• If the DISP. button is pressed at  
this point, the cursor moves to the  
shooting menu tab.  
5
• Press the ADJ./OK button " at the  
bottom item to display the next  
screen.  
Press the ADJ./OK button F.  
• The menu item settings are displayed.  
3
4
5
Press the ADJ./OK button !" to  
select the setting.  
Press the ADJ./OK button.  
• The setting is confirmed, the shooting menu disappears and the  
camera is ready to shoot.  
• To select the highlighted option and return to the menu shown in  
Step 2, press the ADJ./OK button N.  
66  
Shooting Menu Options  
Dynamic Range Expansion  
Select the dynamic range expansion effects.  
Plus Normal Shooting  
G
G
P.57  
P.57  
Choose whether to record both an enhanced and an unmodified copy when taking  
pictures with dynamic range expansion.  
Picture Quality/Size  
G
P.124  
Adjust picture quality and size when taking pictures.  
Movie Size  
G
P.124  
Choose the movie frame size.  
Density  
Adjust contrast when using the [Text Mode] option in scene mode.  
Size  
G
P.124  
Choose the size of pictures taken using the [Text Mode] option in scene mode.  
Focus  
G
P.72  
Choose a focusing mode.  
—
Multi AF  
Measures the distances from nine AF areas and focuses to the nearest AF  
area. Choose to prevent out-of-focus photos.  
5
—
Spot AF  
Selects one AF area at the center of the picture display to allow the camera  
to focus on this area automatically.  
Face-Pri. AF  
The camera automatically detects and focuses on faces.  
Continuous AF  
Measures the distance from the center AF area and focuses on the subject  
in the center area. If the subject moves while the shutter-release button is  
pressed halfway, the camera will track the subject while focusing continuously.  
Multi-trgt AF  
Takes five consecutive pictures while shifting the focus to multiple positions.  
(G P.72)  
MF  
Enables you to adjust the focus manually. (G P.73)  
Snap  
Fixes the shooting distance to a short distance (approx. 2.5m (8.2ft.)).  
∞ (Infinity)  
Fixes the shooting distance to infinity. It is useful for shooting distant scenes.  
67  
Pre-AF  
If [On] is selected when [Multi AF], [Spot AF], [Face-Pri. AF], [Continuous AF], or  
[Multi-trgt AF] is selected for [Focus], the camera will continue to focus even when  
the shutter-release button is not pressed halfway. This may decrease the time  
needed to focus when a picture is taken, potentially improving shutter response.  
Exposure Metering  
You can change the metering method (the range to use for metering) used to  
determine the exposure value.  
—
Multi  
The entire shooting range is divided into 256 partitions, and each is metered  
to determine the overall exposure value.  
Center  
The entire image is metered, with emphasis on the center, to determine  
the exposure value. Use this when the brightness of the center and  
surroundings are different.  
Spot  
Only the center of the image is metered to determine the exposure value.  
Use this setting when you want to use the brightness at the center. This is  
useful if there is a marked difference in contrast or backlighting.  
Image Settings  
5
You can change the picture quality of an image, including the contrast, sharpness,  
color and vividness.  
Vivid  
Take strong, vivid photos with higher contrast and sharpness and maximum  
vividness.  
—
Standard  
Creates an image with normal picture quality.  
Cust. Settings  
You can select from five [Contrast],  
[Sharpness], and [Vividness] levels.  
Black & White  
Creates a black and white picture.  
Sepia  
Creates a sepia-toned picture.  
68  
Noise Reduction  
Perform noise reduction when taking photographs. Choose from [Off], [Auto],  
[Weak], [Strong], or [MAX]. The time required to record images varies with the  
option selected.  
Flash Exposure Compensation  
You can adjust the light intensity of the flash. You can set the light intensity from  
–2.0 EV to +2.0 EV in increments of 1/3 EV.  
Caution------------------------------------------------------------------------------  
Flash exposure compensation may not work outside the flash range. (G P.122)  
Auto Bracket  
G
P.73  
Vary exposure, white balance, color, or focus over a series of pictures.  
Time Exposure  
Use time exposures to capture fireworks as they rise into the air and explode,  
to create trails of light behind cars and other moving objects, or to shoot night  
scenery. Choose the exposure time from [Off], [1 second], [2 seconds], [4 seconds],  
and [8 seconds].  
Note----------------------------------------------------------------------------------  
• The shutter speed may slow down and images may be blurred. Hold the  
camera steady by using a tripod when shooting.  
5
• The picture display turns off while shooting.  
• Long time-exposures are processed to reduce noise. The time required for  
processing is roughly equivalent to the exposure time.  
• ISO sensitivity is restricted to values between ISO 80 and ISO 400. If the value  
currently selected by the user is between ISO 800 and ISO 3200, the camera will  
automatically set ISO sensitivity to ISO 400 (G P.78).  
Custom Self-Timer  
G
P.30  
Set the shooting interval and the number of pictures when you want to shoot  
several pictures with the self-timer.  
Available Settings Description  
Pictures  
Set this between one and ten pictures. The default setting is  
[2 Pics].  
Interval  
Set this between five and ten seconds. The default setting is  
[5 Sec.].  
Note----------------------------------------------------------------------------------  
• The camera takes pictures at the specified interval; the self-timer lamp blinks for  
two seconds before each shot. Focus is locked at the setting for the first shot in  
the sequence.  
• Press the MENU button to cancel self-timer shooting.  
69  
Interval Shooting  
You can set the camera to automatically take  
pictures at fixed intervals. You can set the  
shooting interval from five seconds to one hour in  
increments of five seconds.  
Hours Minutes Seconds  
Caution------------------------------------------------------------------------------  
• The interval shooting setting is cleared when the camera is turned off.  
• The time until the next picture can be taken according to the shooting menu  
setting may be longer than the time set for interval shooting. If this is the case,  
the shooting interval becomes longer than the set time.  
Note----------------------------------------------------------------------------------  
• Depending on the remaining battery level, the battery may become depleted  
during interval shooting. Use of a battery with adequate remaining power is  
recommended.  
• If you press the shutter release button during interval shooting, the camera  
shoots as usual.  
• A high speed memory card or a SD memory card with sufficient memory is  
recommended.  
5
Camera Shake Correction  
Select [On] to reduce the effects of camera shake.  
Caution------------------------------------------------------------------------------  
• The camera shake correction function cannot prevent movement of the  
shooting subject (caused by wind, etc.).  
• Results vary with shooting conditions.  
Note----------------------------------------------------------------------------------  
The J symbol appears when camera shake is likely to occur. (G P.16)  
70  
Slow Shutter Limit  
The maximum shutter speed can be limited to the following: 1/8 second, 1/4  
second, and 1/2 second. When this function is set to [Off], the maximum shutter  
speed varies depending on the ISO setting.  
Note----------------------------------------------------------------------------------  
• When time exposure is set, priority is given to time exposure.  
• When scene mode is set to [Night. Port.] or [Nightscape], the maximum shutter  
speed for [Night. Port.] or [Nightscape] is given priority.  
• When the flash is set to [Flash Synchro.], the longest shutter speed is one  
second.  
• When using the slow shutter limit, the light quantity may be insufficient  
depending on the brightness of the subject, resulting in a dark image. In this  
case, try the following:  
• Selecting a greater slow shutter limit.  
• Raising the ISO setting. (G P.78)  
• Using the flash. (G P.29)  
Date Imprint  
You can insert the date (YY/MM/DD) or the date and time (YY/MM/DD hh:mm) at  
the lower right of a still image. Select [Off] to turn date imprint off.  
Note----------------------------------------------------------------------------------  
• Make the date and time settings in advance. (G P.96)  
• [Date Imprint] cannot be used with movies.  
5
• The date imprinted in an image cannot be deleted.  
Exposure Compensation  
Choose exposure compensation.  
White Balance  
Adjust the white balance.  
ISO Setting  
G
G
G
P.76  
P.77  
P.78  
Adjust ISO sensitivity.  
Restore Defaults  
Select [Yes] and press the ADJ./OK button to restore shooting menu settings to  
their default values.  
Shooting menu options ------------------------------------------------------------  
The options displayed in the shooting menu vary with the selected shooting  
mode. In scene mode, the options displayed vary with the selected scene. See  
P.118 for more information.  
71  
Focus  
Multi-Target AF  
When you half-press the shutter release button, the camera  
automatically determines multiple focus positions. When you then  
press the shutter release button all the way down, the camera shifts  
among the different focus positions, taking five consecutive pictures.  
The five still images are grouped together as a set and are recorded as  
an MP file. This function is especially useful for telephoto shooting and  
shooting with macro mode.  
A V icon will be displayed if the camera  
is able to focus. If the camera is unable  
to focus, the V icon will blink. The focus  
positions selected by the camera are only  
displayed during playback (G P.62).  
5
(ꢂꢃꢄ ꢅꢆꢅꢇꢇꢇ  
+51ꢈꢅꢇꢇ  
MP file ----------------------------------------------------------------------------------  
MP is a file format for recording a set of still images.  
Caution---------------------------------------------------------------------------------  
• The flash cannot be used.  
• The [Time Exposure] setting is disabled. (G P. 6 9 )  
• The camera shake correction function cannot be used. If [Multi-trgt AF] is set  
while the camera shake correction function is turned on, E changes to F  
.
Note-------------------------------------------------------------------------------------  
• If this function is turned on when using the digital zoom, the digital zoom is  
disabled and shooting is performed at the maximum magnification for the  
optical zoom (10.7 ×).  
• [White Balance] functions according to the [Auto] setting even if it is set to  
[Multi-P AUTO].  
72  
Manual Focus (MF)  
ĵĻĴ Ň  
ĺĺĺĺ  
Manual focus (MF) can be used to focus  
at a selected distance when the camera is  
unable to focus using autofocus. A focus  
bar is displayed in the picture display.  
Hold  
Press and hold the ADJ./OK button as required.  
• Pressing and holding the ADJ./OK button increases the  
magnification only at the center of the screen.  
1
• Pressing and holding the ADJ./OK button again returns from  
enlarged view to normal view.  
Adjust the zoom position with the zoom lever as required.  
2
3
Press the ADJ./OK button !" to adjust the focus.  
• Pressing the ADJ./OK button ! adjusts the focus to farther objects  
and pressing the ADJ./OK button " adjusts the focus to closer  
objects.  
5
Press the shutter release button to shoot the picture.  
4
Note-------------------------------------------------------------------------------------  
You can also use manual focus to focus on objects within the macro shooting  
range.  
Auto Bracket  
Choose the type of bracketing performed.  
Note-------------------------------------------------------------------------------------  
Assigning [AT-BKT], [WB-BKT], [CL-BKT], or [FOCUS-BKT] to the Fn (Function)  
button with [Set Fn Button] allows you to switch between on and off by pressing  
the Fn button. (G P. 4 6 )  
73  
Auto Bracketing  
If [On] is selected, the camera will  
take three photos each time the  
shutter-release button is pressed: one  
underexposed by 0.5EV, a second at  
current exposure settings, and a third  
overexposed by 0.5EV.  
An icon is displayed when [On] is selected.  
Note-------------------------------------------------------------------------------------  
• The exposure compensation can be changed using the shooting menu.  
(G P.76)  
• [White Balance] functions according to the [Auto] setting even if it is set to  
[Multi-P AUTO].  
White Balance Bracketing (WB-BKT)  
The white balance bracket function  
automatically records three images—a  
Recording  
5
reddish image, a bluish image, and an  
image of the current white balance.  
Red  
Blue  
An icon is displayed when [WB-BKT] is  
selected.  
Note-------------------------------------------------------------------------------------  
• The white balance can be changed using the shooting menu. (G P.77)  
• If [Image Settings] is set to [Black & White] or [Sepia], the white balance bracket  
function can be set but it does not operate.  
Color Bracketing (CL-BKT)  
With color bracketing, three images, a  
black-and-white, a color, and a sepia  
Recording  
image, are recorded.  
Black&White  
Sepia  
An icon is displayed when [CL-BKT] is  
selected.  
74  
Contrast, Sharpness and Vividness During Color Bracket Shooting -----  
During color bracket shooting, the contrast, sharpness, and vividness values set  
in [Image Settings] are applied. However, the values for [Standard] in [Image  
Settings] are applied when [Image Settings] is set to [Black & White] or [Sepia].  
Focus Bracketing (FOCUS-BKT)  
Choose this option to automatically vary focus by a selected amount  
over a series of five photographs.  
Select [FOCUS-BKT] and press the ADJ./OK button F.  
1
2
Press the ADJ./OK button NF to choose the focus interval  
and then press the ADJ./OK button twice.  
• The symbol appears on the screen.  
Half-press the shutter release button.  
• The camera focuses according to the [Focus] setting.  
3
Press the shutter release button  
all the way down.  
Recording  
4
• The camera takes five consecutive  
pictures based on the focus position  
in Step 3.  
5
FAR  
NEAR  
Note-------------------------------------------------------------------------------------  
• When [Focus] is set to [MF], the first picture is taken at the set focus position  
without being measured.  
• [White Balance] functions according to the [Auto] setting even if it is set to  
[Multi-P AUTO].  
• Photographs are taken and recorded in the following order:  
➝
Focus position  
Shooting order  
Recording order  
Fore  
2
1
Center (*)  
➝
4
4
Back  
5
5
3
2
1
3
(
) Focus set using the option currently selected for [Focus]. (G P.67)  
*
75  
Exposure Compensation  
Use exposure compensation to vary exposure from the value selected  
by the camera. Choose from values between –2 and +2; negative  
values produce darker pictures, positive values brighter pictures.  
Exposure compensation may be required in the following situations:  
For backlighting  
When the background is particularly bright, the subject will appear  
dark (underexposed). In this case, set the exposure level higher (+).  
When your subject is whitish  
The entire picture will turn out dark (underexposed). Set the exposure  
level higher (+).  
When your subject is darkish  
The entire picture will turn out bright (overexposed). Set the exposure  
level lower (–). The same happens when you take a photo of a subject  
in a spotlight.  
ꢀꢁꢂ (  
Press the ADJ./OK button !" to choose  
5
a exposure value and press the ADJ./OK  
button. The selected value is displayed in  
the picture display.  
Note-------------------------------------------------------------------------------------  
If the subject is very bright or very dark, [!AE] will be displayed and exposure  
compensation will not be available.  
76  
White Balance  
Adjust the white balance so that a white subject will appear white. At  
purchase, the white balance mode is set to [Multi-P AUTO]. Change  
the setting in situations where the white balance is difficult to adjust  
effectively, such as when shooting an object of a single color or when  
shooting under multiple light sources.  
AUTO Auto  
Adjusts the white balance automatically.  
Multi-P AUTO  
The camera automatically selects the optimal white balance according to the  
conditions of sun and shade or the flash illumination range.  
Outdoors  
Select this when shooting outdoors (sunny) and white balance fails to adjust  
properly.  
Cloudy  
Select this when shooting in cloudy weather or shade and the white balance  
fails to adjust properly.  
Incandescent Lamp  
Select this when shooting under incandescent light and white balance fails to  
adjust properly.  
5
Incandescent Lamp 2  
Select this when shooting under incandescent light (more reddish, compared  
with [Incandescent Lamp]).  
Fluorescent Lamp  
Select this when shooting under fluorescent light and white balance fails to  
adjust properly.  
Manual Settings  
Adjust the white balance manually. (G P.78)  
Note-------------------------------------------------------------------------------------  
• The white balance may not be adjusted correctly for a subject that is mostly  
dark. In this case, add something white to the subject.  
• When shooting with the flash, the white balance may not be adjusted correctly  
if [Auto] is not selected. In this case, switch to [Auto] to shoot with the flash.  
77  
Manual Settings  
Select [Manual Settings] and press the ADJ./OK button.  
1
Frame a piece of paper or other white object under the  
lighting that will be used in the final photograph and press  
DISP.  
2
3
• The white balance is set.  
Press the ADJ./OK button.  
• The symbol appears on the screen.  
• The effect of the selected white balance setting can be previewed in  
the picture display. Repeat the above steps until the desired effect is  
achieved.  
Note-------------------------------------------------------------------------------------  
To cancel [Manual Settings], select a setting other than [Manual Settings].  
ISO Setting  
ISO sensitivity indicates how sensitive film is to light. A greater value  
means higher sensitivity. High sensitivity is suitable for shooting  
an object in a dark place or a fast-moving object while minimizing  
blurring. When ISO setting is set to [Auto], the camera automatically  
changes the sensitivity according to the distance, brightness, zoom,  
macro settings, and picture quality/size. Choose settings other than  
[Auto] to fix ISO sensitivity at the selected value.  
5
Note-------------------------------------------------------------------------------------  
• Use the [Maximum ISO for ISO Auto] option in the setup menu (G P.93) to  
choose the upper limit for auto ISO sensitivity.  
• If the flash is not used when ISO is set to [Auto], the camera will select an ISO  
sensitivity between 80 and the value selected for [Maximum ISO for ISO Auto].  
If the flash is set to [Auto], the flash will fire if optimal exposure can not be  
achieved at the sensitivity selected for [Maximum ISO for ISO Auto].  
• Images shot with a higher sensitivity may appear grainy.  
• When [Auto] is selected for ISO sensitivity, the ISO value displayed when the  
shutter release button is pressed halfway may in some instances (for example,  
when the flash is used) differ from the value selected when the shutter is  
released.  
78  
6
Playback Menu  
The options in the playback menu can be used to perform a variety of  
operations on existing pictures. To display the playback menu, select  
playback mode and press the MENU button.  
Using the Menu  
Press the 6 (Playback) button to select the playback mode.  
1
2
Press the ADJ./OK button !"NF to display the desired file.  
• For [Flag Function Display] (G P.80), [Slide Show] (G P.80), [Copy  
to Card from Internal Memory] (G P.81), or [Recover File] (G P.81),  
skip this step.  
Press the MENU button.  
• The playback menu appears.  
3
Indicates the range of displayed  
screens.  
6
Press the ADJ./OK button !" to  
select the desired item.  
4
• If the DISP. button is pressed at  
this point, the cursor moves to the  
playback menu tab.  
• Press the ADJ./OK button " at the  
bottom item to display the next  
screen.  
Press the ADJ./OK button F.  
• The screen for the selected menu item appears.  
5
79  
Playback Menu Options  
Flag Function Setting  
G
P.82  
Flag up to 20 files for quick access.  
Flag Function Display  
Displays images flagged with [Flag Function Setting]. Fn button can be used for the  
same purpose.  
Note----------------------------------------------------------------------------------  
The file set to [Flag Function Setting] with the smallest file number is displayed.  
Export Still Images  
Export selected images from a MP file.  
Resize  
G
P.64  
You can reduce the image size of a shot still image to create a new file with a  
different image size.  
Original  
4 : 3F/  
Resized  
4 : 3F  
4 : 3N/  
4 : 3F/  
3 : 2F/  
4 : 3F/  
1 : 1F/  
4 : 3N  
16 : 9F/  
4 : 3F  
4 : 3F/  
4 : 3F  
4 : 3F  
Caution------------------------------------------------------------------------------  
Movies or MP files cannot be resized.  
Trim  
G
P.83  
6
This function allows you to trim a still image you have shot and then save it as a  
separate file.  
Level Compensation  
Create copies of photographs with modified brightness and contrast.  
White Balance Compensation  
Create copies of photographs with modified white balance.  
Skew Correction  
G
G
G
P.85  
P.87  
P.88  
Create copies that have been processed to reduce the effects of perspective on  
rectangular objects.  
Protect  
G
P.89  
Protect images from accidental deletion.  
Slide Show  
You can display the recorded still images and movie files sequentially on the screen.  
Note----------------------------------------------------------------------------------  
• Each still image is displayed for three seconds.  
• For movies and MP files, all the images you shot are played back.  
80  
Copy to Card from Internal Memory  
Copy all data from internal memory to a memory card in a single operation.  
Note----------------------------------------------------------------------------------  
• If there is not enough space available on the destination memory card, a  
warning will be displayed. Select [Yes] to copy only those files for which there is  
sufficient space.  
• It is not possible to copy the contents of an SD memory card to the internal  
memory.  
• When the contents of the internal memory are copied to an SD memory card,  
the files saved to [Flag Function Setting] in the internal memory are canceled.  
DPOF  
G
P.90  
Select pictures for printing.  
Recover File  
Restore deleted files.  
Caution------------------------------------------------------------------------------  
Deleted files cannot be restored after performing any of the following operations.  
• Turning the camera off  
• Switching from playback mode to shooting mode  
• Using DPOF, Resize, Copy to Card from Internal Memory, Skew Correction,  
Level Compensation, White Balance Compensation or Trim  
• Files with DPOF settings are deleted  
• Internal memory or SD memory card is initialized  
• Setting or canceling files for [Flag Function Setting]  
6
• Changing the magnification ratio or magnified area of files for [Flag Function  
Setting]  
• Exporting MP files using [Export Still Images]  
81  
Flag Function Setting  
Flag images for quick access during playback. Flagged images can be  
displayed by pressing the Fn button.  
Setting/Canceling One File at a Time  
To flag or remove flag marking from the current image, select [Flag  
Function Setting] in single-image playback. Flagged files are indicated  
by an icon.  
Note-------------------------------------------------------------------------------------  
If an enlarged still image is set, the magnification ratio and magnified area are  
saved and the enlarged image can be displayed as is.  
Setting/Canceling Multiple Files at One Time  
Flag Function Setting  
To flag or remove flag marking from  
multiple selected images, select [Flag  
Function Setting] in thumbnail view,  
highlight images, and press the ADJ./OK  
button to add or remove flag marking.  
Press DISP. when the operation is  
Finish  
Sel/Cancel  
complete.  
6
Caution---------------------------------------------------------------------------------  
• If the name of the file set to [Flag Function Setting] is changed using a  
computer, the file is canceled from [Flag Function Setting].  
• Copying images from internal memory to a memory card removes flag marking  
from the images in internal memory.  
• When a file in an SD memory card is set to [Flag Function Setting], [CLIPINFO]  
folder and CLIP.CLI file are created on the SD memory card. If these are deleted,  
the corresponding file is canceled from [Flag Function Setting].  
• If the name of an image file is changed using a computer, the file may not be  
able to be set to [Flag Function Setting].  
• Only images taken using this camera can be set to [Flag Function Setting].  
82  
Trim  
Create a cropped copy of the current photograph.  
Turn the zoom lever toward 8 or 9 to  
adjust the crop size and press the ADJ./OK  
button !"NF to position the crop.  
Press the ADJ./OK button to save the cropped image to a separate file.  
Caution---------------------------------------------------------------------------------  
• You can only trim still images shot using this camera.  
• You cannot trim movies or MP files.  
• While you can trim an image repeatedly, the image is recompressed each time  
and there will be some decline in image quality.  
Note-------------------------------------------------------------------------------------  
• To cancel, press the DISP. button.  
• To view help, press the Fn button while the crop display is shown in the picture  
display. Press the Fn button again to exit help.  
• To choose the aspect ratio, press the D button in the crop display. Choose from  
aspect ratios of 4 : 3 and 1 : 1. Aspect ratios of 3 : 2 and 16 : 9 are not supported.  
6
• If an image is trimmed, the compression ratio changes to Fine.  
• The available settings for the trimming frame size differ depending on the  
original image size.  
83  
• The size of the image after cropping depends on the size of the original and  
the size of the crop (the first crop shown in the trimming display is the second  
largest crop; to display the largest crop, select 9 with the zoom lever).  
Aspect ratio 4 : 3  
Original image size  
Trimming level  
1
Trimmed image size  
3072 × 2304  
2592 × 1944  
2048 × 1536  
1280 × 960  
640 × 480  
2, 3  
4 : 3 F/  
4 : 3 N  
4 to 6  
7 to 9  
10 to 13  
1
(3648 × 2736)  
3072 × 2304  
2592 × 1944  
2048 × 1536  
1280 × 960  
640 × 480  
2592 × 1944  
2048 × 1536  
1280 × 960  
640 × 480  
2592 × 1944  
2048 × 1536  
1280 × 960  
640 × 480  
2592 × 1944  
2048 × 1536  
1280 × 960  
640 × 480  
2, 3  
3 : 2 F  
(3648 × 2432)  
4 to 6  
7 to 9  
10 to 13  
1, 2  
3 to 5  
6 to 8  
9 to 12  
1, 2  
3 to 5  
6 to 8  
9 to 12  
1
1 : 1 F  
(2736 × 2736)  
16 : 9 F  
(3648 × 2048)  
6
2, 3  
4 : 3 F  
(2592 × 1944)  
4 to 7  
8 to 12  
1, 2  
3 to 6  
7 to 10  
1
2 to 5  
6 to 9  
1 to 3  
4 to 8  
2048 × 1536  
1280 × 960  
640 × 480  
1728 × 1296  
1280 × 960  
640 × 480  
4 : 3 F  
(2048 × 1536)  
4 : 3 F/  
4 : 3 N  
(1728 × 1296)  
1280 × 960  
640 × 480  
4 : 3 F  
(1280 × 960)  
4 : 3 F/  
(640 × 480)  
4 : 3 N  
1 to 4  
640 × 480  
84  
Aspect ratio 1 : 1  
Original image size  
Trimming level  
1 to 3  
Trimmed image size  
2304 × 2304  
1536 × 1536  
960 × 960  
4 to 6  
7 to 9  
4 : 3 F/  
4 : 3 N  
(3648 × 2736)  
10 to 13  
1, 2  
3 to 5  
480 × 480  
2304 × 2304  
1536 × 1536  
960 × 960  
3 : 2 F  
(3648 × 2432)  
6 to 9  
10 to 13  
1 to 3  
4 to 6  
480 × 480  
2304 × 2304  
1536 × 1536  
960 × 960  
1 : 1 F  
(2736 × 2736)  
7 to 9  
10 to 13  
1 to 3  
4 to 7  
8 to 11  
1 to 3  
4 to 7  
8 to 11  
1, 2  
3 to 6  
7 to 10  
1 to 4  
480 × 480  
1536 × 1536  
960 × 960  
480 × 480  
1536 × 1536  
960 × 960  
480 × 480  
1536 × 1536  
960 × 960  
480 × 480  
960 × 960  
16 : 9 F  
(3648 × 2048)  
4 : 3 F  
(2592 × 1944)  
4 : 3 F  
(2048 × 1536)  
6
4 : 3 F/  
4 : 3 N  
(1728 × 1296)  
5 to 8  
480 × 480  
1 to 3  
960 × 960  
4 : 3 F  
(1280 × 960)  
4 to 8  
480 × 480  
4 : 3 F/  
(640 × 480)  
4 : 3 N  
1 to 4  
480 × 480  
Level Compensation  
Create copies that have been processed to adjust brightness and  
contrast.  
85  
Correcting Images Automatically  
Level Compensation [Auto]  
Select [Auto] and press the ADJ./OK  
button F. A preview will be displayed  
with the original image at upper left and  
the corrected copy on the right.  
Press the ADJ./OK button to copy the  
image.  
Cancel  
Ok  
Correcting Images Manually  
Level Compensation [Manual]  
Help  
Select [Manual] and press the ADJ./OK  
button F. A preview will be displayed  
with the original image at upper left, a  
histogram and black-, mid-, and white-  
point controls at lower left, and the  
corrected copy on the right.  
Chng. Points  
Cancel  
Ok  
Control points  
Press MENU to cycle through the control points  
and press the ADJ./OK button NF to position  
the selected point for enhanced brightness and  
contrast as described below.  
6
Point  
Black  
point  
Effect  
If the image is overexposed, move the black  
point to the right until it lines up with the  
darkest pixel in the histogram.  
To make the image brighter, move the mid-  
point to the right. Moving the mid-point to  
the left makes the image darker.  
If the image is underexposed, move the  
white point to the left until it lines up with  
the brightest pixel.  
Black  
point  
White  
point  
Mid-point  
Mid-  
point  
White  
point  
• To increase contrast, align the black point and white point with the  
darkest and brightest pixels.  
• For help, press the Fn button; press the button again to return to the  
preview display.  
Press the ADJ./OK button to create the corrected copy.  
86  
Caution---------------------------------------------------------------------------------  
• If the camera can not create a corrected copy, an error message will be  
displayed and the camera will exit to the playback menu.  
• To cancel level compensation, press the DISP. button.  
• You can only use level compensation for still images shot using this camera.  
• You cannot use level compensation for movies or MP files.  
• This function may not have any effect for images shot using [Text Mode] in scene  
mode, or images shot when [Image Settings] is set to [Black & White] or [Sepia].  
• While you can use level compensation repeatedly, the image is recompressed  
each time and there will be some decline in image quality.  
White Balance Compensation  
Help  
White Balance Compensation  
Create copies with modified white  
balance.  
A preview will be displayed with the  
original image at upper left, white  
balance controls at lower left, and the  
corrected copy on the right. Press the  
ADJ./OK button !"NF to adjust white  
balance on the Green-Magenta and Blue-  
Amber axes.  
Cancel  
Ok  
Green  
Amber  
6
Press the ADJ/OK button in to record the  
modified copy.  
Magenta  
Blue  
Caution---------------------------------------------------------------------------------  
• You can only use white balance compensation for still images shot using this  
camera.  
• You cannot correct the white balance for movies or MP files.  
• This function may not have any effect for images shot using [Text Mode] in scene  
mode, or images shot when [Image Settings] is set to [Black & White] or [Sepia].  
• While you can use white balance compensation repeatedly, the image is  
recompressed each time and there will be some decline in image quality.  
87  
Note-------------------------------------------------------------------------------------  
• To cancel, press the DISP. button.  
• Press the D button to reset white balance.  
• For help, press the Fn button; press the button again to return to the preview  
display.  
Skew Correction  
Create copies that have been processed to reduce the effects of  
perspective on rectangular objects, such as message boards or  
business cards.  
Caution---------------------------------------------------------------------------------  
• You can only use skew correction for still images shot with this camera.  
• You cannot use skew correction for movies or MP files.  
Note-------------------------------------------------------------------------------------  
• If the camera is able to detect an object that can be used to correct perspective,  
a message will be displayed with the object shown by an orange frame. The  
camera can detect up to five objects.  
• If the target area cannot be detected, an error message appears. The original  
image remains unchanged.  
• To select another correction area, move the orange frame to the target area by  
pressing the ADJ./OK button F.  
6
• To cancel skew correction, press the ADJ./OK button !. Even if you cancel skew  
correction, the original image remains unchanged.  
• The image size does not change for skew corrected images.  
• If the image size is large, skew correction will take time. Resize the image  
(G P.80) before performing skew correction to speed up the process.  
• The following table shows the approximate time required for skew correction.  
Image Size  
4 : 3 F  
Correction time  
Image Size  
4 : 3 F  
Correction time  
Approx. 23 seconds  
Approx. 22 seconds  
Approx. 17 seconds  
Approx. 13 seconds  
Approx. 13 seconds  
Approx. 12 seconds  
Approx. 8 seconds  
Approx. 3 seconds  
Approx. 1 seconds  
4 : 3 N  
3 : 2 F  
1 : 1 F  
16 : 9 F  
4 : 3 F  
4 : 3 F  
4 : 3 F  
• When scene mode is set to [Skew Correct Mode], you can shoot an image and  
then immediately correct any skew in the image. (G P.55)  
88  
Protect  
[Protect] allows you to protect files from  
being accidentally deleted.  
If [1 File] is selected, you can protect or  
unprotect the file selected by pressing the  
ADJ./OK button NF.  
If [Select All] or [Cancel All] is selected,  
you can protect or unprotect all files.  
Selecting Multiple Files  
Select [Sel Mult] to change the protect status of multiple individual  
files or of all files in a selected range.  
To select multiple individual frames:  
Select [Sel. Indiv.] and press the ADJ./OK button.  
1
2
Select a frame and press the ADJ./OK button.  
• Press the MENU button to switch to the display for specifying a  
range of files.  
• If you selected a file by mistake, you can deselect it by selecting the  
file and pressing the ADJ./OK button.  
6
• Select all files you want to protect.  
Press the Fn button.  
3
To select two frames and all frames between them:  
Select [Sel. Range] and press the ADJ./OK button.  
1
2
Select the first frame and press the ADJ./OK button.  
• Press the MENU button to switch to the display for specifying files  
separately.  
• If you make a mistake when selecting the starting point for the range  
of files, press the DISP. button to return to the screen for selecting  
the starting point.  
89  
Select the last frame and press  
the ADJ./OK button.  
• Repeat Steps 2 and 3 to select  
multiple ranges.  
3
4
Press the Fn button.  
Note-------------------------------------------------------------------------------------  
[Sel. Indiv.] and [Sel. Range] can be selected directly if [Protect] is chosen in  
thumbnail view.  
Caution---------------------------------------------------------------------------------  
Note that formatting deletes all files, including protected files.  
DPOF  
To request professional prints of the  
photographs on a memory card, first use  
this option to create a digital “print order”  
listing the photos you wish to print and  
the number of prints, and then take the  
memory card to a digital print service  
center that supports the DPOF standard.  
6
To add a photo to or remove it from the print order, select [1 File] and  
press the ADJ./OK button NF to display the desired file.  
Select [Select All] to add all photos to the print order, or [Cancel All] to  
remove all files from the print order.  
Selecting Multiple Files  
To change the print status of multiple individual files or of all files in a  
selected range, select [DPOF] in thumbnail view.  
Select photos and press the ADJ./OK button !" to choose the  
number of prints; press the ADJ./OK button ! to increase the number  
of copies, or press the ADJ./OK button " to decrease the number of  
copies.  
Press the ADJ./OK button to exit when settings are complete.  
90  
Note-------------------------------------------------------------------------------------  
To remove the DPOF settings for multiple still images, follow the same steps  
described above to set the number of copies to print to [0] for each image, and  
then press the ADJ./OK button.  
Viewing Pictures on TV  
To view pictures on a TV, connect the camera using the supplied AV  
cable.  
Securely connect the AV cable to the Video Input Terminal (yellow)  
Video In terminal on the television.  
1
• Connect the white plug of the AV cable  
to the audio input terminal (white) of the  
TV unit and the yellow plug to the video  
input terminal (yellow).  
Turn the camera off and securely  
connect the cable to the camera AV  
2
Audio Input Terminal (white)  
output terminal.  
Set the television to Video mode (Set the input to Video).  
• For details, see the documentation that came with the television.  
3
6
Press the POWER button, or press and hold the 6  
(Playback) button to turn the camera on.  
4
Caution---------------------------------------------------------------------------------  
• When the AV cable is connected to the camera, the picture display and the  
speaker output turn off.  
• Do not force the AV cable into the terminal.  
• Do not apply excessive force with the AV cable connected.  
• When using the AV cable, do not move the camera with the AV cable.  
Note-------------------------------------------------------------------------------------  
• You can connect the AV cable to the Video In terminal on your video recorder  
and record what you have shot to a video recorder.  
• The camera supports the following video standards: NTSC and PAL. Where  
possible, the camera is set to the standard used in your country or region before  
shipment; before connecting the camera to a device that uses a different video  
standard, choose the appropriate video mode. (G P.96)  
91  
7
Setup Menu  
You can change the camera settings by displaying the setup menu  
from the shooting menu (G P.66) or playback menu (G P.79).  
Using the Menu  
Press the MENU button.  
• The shooting menu (or the playback menu) appears.  
1
Press the ADJ./OK button N.  
2
3
Press the ADJ./OK button ".  
• The setup menu appears.  
• In scene mode and continuous  
mode, press the button " twice.  
Press the ADJ./OK button F.  
4
Indicates the range of displayed  
screens.  
Press the ADJ./OK button !" to  
select the desired item.  
5
• If the DISP. button is pressed at this  
point, the display returns to the  
screen shown in Step 3.  
• Press the ADJ./OK button " at the  
bottom item to display the next  
screen.  
7
Press the ADJ./OK button F.  
• The menu item settings are displayed.  
6
Press the ADJ./OK button !" to  
select the setting.  
7
92  
Press the ADJ./OK button.  
• The setup menu disappears and the camera is ready for shooting or  
playback.  
8
• The setup menu may appear depending on the setting. In this  
case, press the MENU button or the ADJ./OK button to return to the  
shooting or playback screen.  
• Pressing the ADJ./OK button N in Step 8 confirms the setting and  
the display returns to the screen shown in Step 5.  
Note-------------------------------------------------------------------------------------  
For some functions, the setting selection method may differ from what is  
explained here. For detailed operation, see the explanation of each function.  
Setup Menu Options  
Format [Card]  
Select [Yes] and press the Fn button to format the memory card.  
Format [Internal Memory]  
Select [Yes] and press the Fn button to format internal memory. If you have images  
in the internal memory that you do not want to delete, copy the images to the SD  
memory card before formatting the internal memory. (G P.81)  
LCD Brightness  
Press the ADJ./OK button !" to adjust the brightness of the picture display.  
Reg. My Settings  
G
P. 9 7  
Save current camera settings.  
Step Zoom  
Select [On] to allow zoom to be adjusted in discrete steps that on a 35-mm camera  
would be equivalent to focal lengths of 28 mm, 35 mm, 50 mm, 85 mm, 105 mm,  
135 mm, 200 mm, and 300 mm. In macro mode, the step zoom focal lengths are  
roughly equivalent to 31, 35, 50, 85, 105, 135, 200 and 300 mm on a 35-mm camera.  
7
Set Fn Button  
G
P. 4 7  
Choose the role performed by the Fn button.  
ADJ Button Setting 1–4  
G
P. 4 4  
Choose the role performed by the ADJ./OK button.  
Maximum ISO for ISO Auto  
Select the maximum value chosen by the camera when [Auto] is selected for [ISO  
Setting] (G P.78). Use to prevent ISO sensitivity from being raised too high.  
AF Auxiliary Light  
If [On] is selected, the AF auxiliary light will light to assist autofocus.  
93  
Operation Sounds  
Choose the sounds made by the camera.  
Available Settings Description  
All  
All sounds on.  
Level Sound  
Shutter Sounds  
Only the level sound is emitted.  
Only the shutter sound and level sound are emitted.  
Note----------------------------------------------------------------------------------  
• If you try to perform an operation that cannot be performed, the beep sound is  
emitted regardless of the [Operation Sounds] setting.  
• Regardless of the option selected, no sound is emitted when [Pets] or [Discreet  
Mode] is selected in scene mode.  
Volume Settings  
The operation sound volume can be changed.  
Note----------------------------------------------------------------------------------  
• When [Volume Settings] is set to [ꢀꢀꢀ] (Mute), the level sound is not  
emitted even when [Level Setting] is set to [Display+Sound] or [Sound].  
• Regardless of the option selected, no sound is emitted when [Pets] or [Discreet  
Mode] is selected in scene mode.  
LCD Confirmation Time  
Choose how long photos are displayed after shooting. Choose [Hold] to display  
photos until the shutter release button is pressed halfway. When [LCD Confirmation  
Time] is set to [Hold], the displayed image can also be enlarged (G P.34) or  
deleted (G P.35).  
Auto Power Off  
Choose how long the camera remains on when no operations are performed.  
The camera will not turn off automatically if [Off] is selected, during interval timer  
photography (G P.70), or when the camera is connected to a computer or printer.  
LCD Auto Dim  
7
If [On] is selected, the picture display will automatically dim to save power if no  
operations are performed for about five seconds. This feature is not available in  
synchro-monitor mode (G P.38).  
Digital Zoom Image  
G
P. 9 8  
Choose [Auto Resize] to record pictures taken with digital zoom at actual size,  
[Normal] to enlarge image data from the center of the frame.  
Level Setting  
G
P. 4 0  
Adjust level indicator and level sound settings.  
94  
Grid Guide Display Options  
G
P. 3 8  
Choose the type of framing grid available in shooting mode.  
Available Settings Description  
A three-by-three grid for“rule of thirds”composition.  
A four-by-four grid with diagonal lines running from corner  
to corner makes it easy to find the center of the subject. Use  
for architectural photography or photographing products for  
display.  
A two-by-two grid with the center of the frame left clear to  
make it easier to view the subject. Use if your subject is in  
motion.  
Shooting Info. Display Frame  
ꢀꢁꢂ (  
Select [On] to display shooting icons in a frame  
surrounding the view through the lens (G P.38).  
Shooting information display frame cannot be used  
in movie mode.  
Minimum Distance  
Select [Show] to display the minimum focus distance for the current zoom position.  
The minimum focus distance is not displayed in scene auto mode.  
Auto Rotate  
7
Select [On] to automatically display pictures in the correct orientation during  
playback.  
White Saturation Display  
G
P. 3 9  
If [On] is selected, highlights can be viewed in playback mode by pressing the DISP.  
button.  
95  
Card Sequence No.  
When you switch SD memory cards, you can set your camera to continue  
consecutive numbering from the previously loaded card.  
Available Settings Description  
On (Continue  
numbering)  
Files names consist of“R”followed by a seven-digit number (e.g.,  
“R0010001.jpg”), assigned in ascending order from 0010001 to  
9999999. When a new memory card is inserted, file numbering  
continues from the last number used.  
Off (Do not  
continue  
numbering)  
File numbering is assigned, from RIMG0001.jpg to RIMG9999.  
jpg, for each SD memory card. When the file name reaches  
RIMG9999, no more data can be recorded to that card.  
Note----------------------------------------------------------------------------------  
• This option applies only to memory cards. The names of photos in internal  
memory consist of“RIMG”and a four-digit number.  
• When images are transferred to a computer using DL-10 (G P.107), the file  
being transferred is renamed and saved.  
Caution------------------------------------------------------------------------------  
When the file name reaches RIMG9999 or R9999999, no more files can be saved.  
In this case, move image data from the SD memory card to the memory of the  
computer or a storage medium, and then format the SD memory card.  
Date Settings  
G
P. 2 3  
Set the camera clock.  
Note----------------------------------------------------------------------------------  
• If the battery is removed for more than one week, the date and time settings  
will be lost. These settings must be made again.  
7
• To retain the date and time settings, load a battery with adequate remaining  
power for more than two hours.  
(
)
Language/N  
*
G
P. 2 3  
You can change the language displayed on the screen.  
Video Out Mode (*)  
You can view your still images and movies on a television screen by connecting  
your camera to a television with the AV cable that came with your camera. Select  
from NTSC (used in North America, the Caribbean, parts of Latin America, and some  
East Asian countries) and PAL (used in the United Kingdom and much of Europe,  
Australia, New Zealand, and parts of Asia and Africa). SECAM is not supported.  
(
) The default setting varies depending on where you purchased the camera.  
*
96  
Reg. My Settings  
Save current camera settings in [MY1] or [MY2]. Settings saved in  
[MY1] are recalled when the mode dial is rotated to MY1 , those saved  
in [MY2] when the mode dial is rotated to MY2.  
Set the camera to the desired settings.  
1
2
Select [Reg. My Settings] in the setup menu (G P.92) and  
press the ADJ./OK button F.  
• A confirmation message appears.  
Select [MY1] or [MY2] and press the ADJ./OK button.  
• The current camera settings are registered and the display returns to  
the setup menu.  
3
• If you do not want to register them, press the DISP. button.  
Settings Saved in [Reg. My Settings]  
Slow Shutter Limit  
Shooting mode (5/3/MY1/MY2/  
SCENE/Q /R  
)
Picture Quality/Size  
Focus  
Pre-AF  
Focal distance used in Manual  
Exposure Metering  
Image Settings  
Date Imprint  
Exposure Compensation  
White Balance  
ISO Setting  
Zoom position  
Macro  
Flash Exposure Compensation  
Dynamic Range Expansion  
Plus Normal Shooting  
Auto Bracket  
Flash Mode  
Scene mode  
Self-Timer  
DISP. mode  
7
CL-BKT  
Step Zoom  
FOCUS-BKT  
WB-BKT  
Digital Zoom Image  
Level Setting  
Time Exposure  
Grid Guide Display Options  
Minimum Shooting Distance  
Density  
Custom Self-Timer  
Noise Reduction  
Camera Shake Correction  
97  
Digital Zoom Image  
If [Normal] (the default option) is selected for [Digital Zoom Image] ,  
digital zoom will enlarge image data from the center of the frame to  
create a picture at the current image size, creating a slightly grainy  
image. To record pictures taken with digital zoom at actual size, select  
[Auto Resize]. The size at which the image will be recorded varies with  
the zoom ratio.  
ꢀꢁꢂ (  
To use auto resize zoom, hold the zoom  
lever at z (Telephoto) until the camera is  
zoomed all the way in, then briefly release  
the zoom lever and turn it to z again.  
Image size changes each time the zoom  
lever is turned to z. The current size is  
displayed above the zoom bar.  
The auto resize zoom is enabled when  
4 : 3F or  
4 : 3N is selected  
for [Picture Quality/Size] (G P.67), and the digital zoom is enabled in  
other cases.  
Zoom Magnification and Recorded Image Size  
Picture Quality/Size  
Zoom Magnification Focal Length (*)  
4 : 3 F/  
4 : 3 F  
4 : 3 F  
4 : 3 F  
4 : 3 F  
4 : 3 N  
1.0 ×  
1.4×  
1.8×  
2.9×  
5.7 ×  
300 mm  
420 mm  
530 mm  
850 mm  
1710 mm  
7
(*) Equivalent to that on a 35mm camera  
Caution---------------------------------------------------------------------------------  
• Regardless of the option selected, normal digital zoom is used when [Skew  
Correct Mode] is selected in scene mode.  
• Fine picture quality is used for all photographs recorded using [Auto Resize],  
regardless of the option currently selected for [Picture Quality/Size].  
98  
8
Direct Printing  
About the Direct Print Function  
The Direct Print standard enables direct printing from a camera to a  
printer by connecting them via a USB cable. Photos can be printed  
quickly and easily from your digital camera without using a computer.  
Caution---------------------------------------------------------------------------------  
You cannot print AVI files (movies) or MP files with this function.  
Note-------------------------------------------------------------------------------------  
• This camera uses PictBridge, an industry standard for Direct Printing.  
• Your printer must be compatible with PictBridge to use the Direct Print  
function. For support information, see the documentation that came with the  
printer.  
Connecting the Camera to a Printer  
Connect your camera to a printer using the USB cable provided.  
Make sure that the camera power is off.  
1
2
Connect your camera to a printer  
using the USB cable provided.  
• Turn on the printer if it is not already  
on.  
• Your camera turns on automatically.  
Note-------------------------------------------------------------------------------------  
To disconnect the camera from the printer, check that the camera is turned off  
after printing is finished, and disconnect the USB cable.  
8
Caution---------------------------------------------------------------------------------  
• Do not force the USB cable into the terminal.  
• Do not apply excessive force with the USB cable connected.  
• When using the USB cable, do not move the camera with the USB cable.  
99  
Printing Still Images  
You can print still images from the camera with a PictBridge-  
compatible printer. If a memory card is inserted, the pictures will be  
printed from the memory card; otherwise pictures will be printed from  
internal memory.  
Caution---------------------------------------------------------------------------------  
Do not disconnect the USB cable during printing.  
Note-------------------------------------------------------------------------------------  
• If a [Printer error.] message appears during image transfer, check the printer  
status and take the appropriate action.  
• If a computer connection message appears even though the camera is  
connected to the printer, reconnect the camera and press the ADJ./OK button  
within two seconds.  
Before printing, connect the camera to  
the printer. The message [Connecting...]  
shown at right will be displayed if the  
printer is ready; press ADJ./OK to view the  
Direct Print playback display.  
Printing One or All Still Images  
Select an image for printing and press the ADJ./OK button.  
1
2
Select [1 File] or [All Files] and press the ADJ./OK button.  
• The Direct Print menu appears.  
8
Select an item and press the ADJ./OK button F to view the  
options available.  
3
• When [Connecting…] is displayed,  
the connection to the printer is not  
yet established. When a connection  
is established, [Connecting…]  
disappears and [Direct Print] appears.  
Proceed with this step after the  
connection is established.  
100  
• The following items can be selected. Each item is available only  
when supported by the printer connected to the camera.  
Item Name  
Paper Size  
Paper Type  
Layout  
Description  
Sets the paper size.  
Sets the paper type.  
Sets the number of images printed on a sheet of paper.  
The number of images that can be laid out on a sheet of  
paper varies depending on the connected printer.  
Selects whether to print the date (shooting date). The  
date format can be set using the date/time option in the  
setup menu. If the picture was taken using [Date Imprint]  
(G P.71), only the imprinted date will be printed.  
Selects whether to print the file name.  
Date Print  
File Name Print  
Optimize Image Selects whether to optimize the image data (still image)  
prior to printing on the printer.  
Print Size  
Print Quality  
Report Print (*)  
Sets the print image size.  
Sets the print quality.  
Prints on forms.  
Printing Quantity Sets the print quantity.  
Toner Saving (*)  
Selects whether to conserve toner by using less ink  
during printing.  
1-Side/2-Sides (*) Selects whether to print on both sides of the paper.  
During duplex printing, one copy is printed for each still  
image. Only one copy is printed even if you selected  
more than one copy to print in Step 3 on P.102.  
(
) Each item is available only when supported by the Ricoh printer connected  
to the camera.  
*
Note-------------------------------------------------------------------------------------  
• To specify the settings as the default settings  
next time the camera is connected to the  
printer, press the MENU button when the  
screen in Step 3 is displayed. Select [Yes] in  
the display at right and press the ADJ./OK  
button.  
8
• To use the settings last set the next time the  
camera is connected to the printer, select [No].  
Select an option and press the ADJ./OK button.  
• The display returns to the Direct Print menu.  
4
• Repeat Steps 3 and 4 to change other settings as required.  
101  
Press the ADJ./OK button.  
• The selected still images are sent to the printer and the [Sending…]  
screen appears.  
5
• Pressing the DISP. button cancels the operation.  
• When the images have been sent to the printer, the display returns  
to the Direct Print playback mode screen and printing starts.  
Printing Several Still Images  
Turn the zoom lever toward 9 (Thumbnail View) to display  
the thumbnail view.  
1
Select an image and press the ADJ./OK button.  
2
3
Prnt Fil  
Last File  
Press the ADJ./OK button !" to  
1
set the number of copies to print.  
• Press the ADJ./OK button ! to  
increase the number of copies, or  
press the ADJ./OK button " to  
decrease the number of copies.  
Forward  
• Repeat Steps 2 and 3 to select  
additional images.  
Press the ADJ./OK button.  
• The Direct Print menu appears.  
4
5
Select an item and press the ADJ./OK button F to view the  
options available.  
• See Steps 3 and following on P.100.  
8
Note-------------------------------------------------------------------------------------  
• Only images with a printer symbol (  
) are printed. If you cancel printing and  
then try to print again, make sure that the printer symbol is on the images you  
want to print.  
• The same still image can also be printed several times on a single sheet.  
• The available items vary depending on the functions of the printer.  
• To print images using the printer’s default settings, select [Printer Select] on the  
detailed options screen.  
102  
9
Downloading Images to Your Computer  
The screen images shown here may differ from the images displayed  
on your computer depending on your computer OS.  
For Windows  
You can copy pictures to your computer with or without DL-10  
software, which can be installed from the supplied CD.  
System Requirements for Using the Supplied CD-ROM  
The following environments are necessary for using the supplied CD-  
ROM. Please check your computer, or the computer's user manual.  
Operating Systems  
Supported  
Windows 2000 Professional Service Pack 4  
Windows XP Home Edition Service Pack 3/Professional Service Pack 3  
Windows Vista Service Pack 2  
Windows 7  
CPU  
Windows 2000/Windows XP: Pentium® lll 500 MHz or faster  
Windows Vista/Windows 7: Pentium® lll 1 GHz or faster  
Windows 2000/Windows XP: 256 MB or more  
Windows Vista: 512 MB or more  
Memory  
Windows 7: 1 GB or more  
Hard drive space  
required for installation  
Display Resolution  
Display Colors  
160 MB or more  
1024 × 768 pixels or greater  
65,000 colors or greater  
CD-ROM Drive  
USB Port  
A CD-ROM drive compatible with the above-mentioned computer  
A USB port compatible with the above-mentioned computer  
9
103  
Caution---------------------------------------------------------------------------------  
• The CD-ROM supports the following languages. Operations are not guaranteed  
on operating systems with languages other than those listed below.  
Japanese, English, French, German, Spanish, Italian, Chinese (Traditional, Simplified), Korean  
• The supplied CD-ROM is not supported on 64-bit versions of the Windows  
operating system.  
• If your computer has an upgraded OS, the USB function may not work normally,  
so it cannot be supported.  
• The provided software may not operate properly if changes are made to the  
operating system, such as with patches and service package releases.  
• The camera does not support connection to a USB port added by using an  
extension function (PCI bus or other).  
• If used in conjunction with a hub or other USB devices, the software may not  
work properly.  
• When dealing with movies and other large files, a larger memory environment  
is recommended.  
CD-ROM Setup  
Once you insert the supplied CD-ROM in the CD-ROM drive, the  
installer screen appears automatically.  
Windows 2000/Windows XP  
• The installer screen appears automatically.  
Windows Vista/Windows 7  
• If an Autorun dialog is displayed, select [Run Autorun.exe]. The installer  
will start automatically.  
Use this button to install  
software required for batch  
downloading and editing of  
images.  
9
Click this to display the  
“Software User Guide”(PDF).  
Click this to display the list of  
files contained on the CD-ROM.  
104  
Installing Software  
Click [Installing the software] to install the following software.  
Software  
Description  
DL-10  
Irodio Photo & Video  
Studio  
Downloads images collectively to your computer.  
Display, manage, and edit existing images. The Windows 7  
Libraries are not supported.  
USB Driver  
Used to connect an earlier model Ricoh camera to  
a computer running Windows 98/Windows 98 SE/  
Windows Me/Windows 2000. Not used with this camera.  
Used to connect an earlier model Ricoh camera to  
a computer running Windows XP/Windows Vista/  
Windows 7. Not used with this camera.  
WIA Driver  
Caution---------------------------------------------------------------------------------  
• Do not install the software when the camera is connected to your computer  
with a USB cable.  
• The names for DC Software items differ from the names for Caplio Software  
items provided with previous models as shown below.  
Caplio Software  
RICOH Gate La  
Caplio Viewer  
Caplio Server  
Caplio Setting  
DC Software  
DL-10  
DU-10 (not used with this camera)  
SR-10 (not used with this camera)  
ST-10 (not used with this camera)  
If Caplio Software from a CD-ROM supplied with a previous model is already  
installed on your computer, a message asking you to uninstall the Caplio  
Software before installing DC Software will appear when you try to install the  
new software.  
• Administrator privileges are required for installation.  
• DL-10 is not network-compatible. Use as a stand-alone application.  
Click [Installing the software].  
Windows 2000/Windows XP  
9
1
• After a while, the [Choose Setup Language] screen appears.  
Windows Vista/Windows 7  
• If a [User Account Control] dialog is displayed, select [Yes]  
(Windows 7) or [Allow] (Windows Vista). After a short pause, the  
[Choose Setup Language] dialog will be displayed.  
105  
Select a language and follow the on-screen instructions to  
complete installation.  
• The Irodio Photo & Video Studio installer starts. Install Irodio Photo &  
Video Studio following the messages displayed on the screen.  
2
3
When a message appears asking you to restart your  
computer, select [Yes, I want to restart my computer now.]  
and then click [Finish].  
• Your computer will restart automatically.  
• After your computer restarts, a Windows security warning message  
appears.  
Click [Unblock] for DL-10.  
4
Uninstalling the Software ---------------------------------------------------------  
•
DC Software and Irodio Photo & Video Studio can be uninstalled from [Control  
Panel] > [Programs and Features] (Windows 7 and Windows Vista; in category or  
home view, select [Control Panel] > [Programs] > [Uninstall a program]), [Add or  
Remove Programs] (Windows XP), or [Add/Remove Programs] (Windows 2000).  
• Administrator privileges are required.  
• Quit any other programs that may be running before uninstalling the software.  
Adobe Reader  
Adobe Reader is required to display the operation manual (PDF file).  
Acrobat Reader or Adobe Reader need not be installed if already  
installed on your computer.  
Note-------------------------------------------------------------------------------------  
• For details about Adobe Reader, see Help for Adobe Reader.  
• To install Irodio Photo & Video Studio alone, double-click“Irodio Photo & Video  
Studio.exe”in the Irodio Photo & Video Studio folder.  
• Installation of Adobe Reader 9.1 requires either Microsoft Internet Explorer  
6.0 or later or Firefox 2.0 or later. Microsoft Internet Explorer is available via  
Microsoft Update.  
9
• Installation of Adobe Reader 9.1 requires MSI (Microsoft Windows Installer)  
version 3.1 or later. Microsoft Windows Installer is available via Microsoft Update.  
Caution---------------------------------------------------------------------------------  
• Do not install the software when the camera is connected to your computer  
with a USB cable.  
• Administrator privileges are required for installation.  
106  
Click [Browse CD-ROM Content].  
• The files on the CD-ROM are listed.  
1
2
Double-click [Adobe Reader], [English], and [AdbeRdr910_  
en_US_Std] (AdbeRdr910_en_US_Std.exe).  
• A screen appears to confirm user account management for Windows  
Vista. Select [Continue].  
Install Adobe Reader by following the messages displayed.  
3
Copying Pictures to Your Computer  
Follow the steps below to copy pictures to your computer.  
Connect the camera to the  
computer using the supplied USB  
cable.  
1
• Turn the camera off before connecting  
the USB cable.  
• The camera turns on automatically  
when a connection is established.  
Copy photos to the computer.  
If DL-10 is installed:  
2
• DL-10 starts and image transfer begins automatically.  
• Pictures are copied to the [Digital Camera] folder in [My Documents],  
where they are sorted into separate folders by date of recording. See  
the “Software User Guide”on the supplied CD for more information.  
If DL-10 is not installed:  
• Copy files from the camera to the  
desired location.  
• When an SD memory card is  
loaded, its files are displayed.  
Otherwise, files in the internal  
memory are displayed.  
9
Example of the display  
in Windows XP  
107  
Disconnect the USB cable when transfer is complete.  
• Click the [Safely Remove Hardware] or  
3
[Unplug or Eject Hardware] icon in the  
taskbar (the illustration above shows the icon for Windows XP) and  
select [Safely Remove USB Mass Storage Device] or [Stop USB Mass  
Storage Device] from the menu that appears. You can then  
disconnect the USB cable.  
• If the remove hardware icon is not displayed  
in Windows 7, click the button in the  
taskbar.  
Caution---------------------------------------------------------------------------------  
• Do not turn off the camera or disconnect the USB cable during image transfer.  
• Do not use force when connecting the cable or when handling the camera with  
the cable connected. Do not attempt to transport the camera while the USB  
cable is connected.  
Note-------------------------------------------------------------------------------------  
The camera is provided with Irodio Photo & Video Studio software that allows you  
to display and edit images from your computer. For how to use Irodio Photo &  
Video Studio, see the displayed“Help”.  
For the latest information about Irodio Photo & Video Studio, access the Web  
page of Pixela Co., Ltd. (http://www.pixela.co.jp/oem/irodio/e/irodio_digitalphoto_  
videostudio/).  
9
108  
For Macintosh  
This camera supports the following Macintosh operating systems.  
• Mac OS 9.0 to 9.2.2  
• Mac OS X 10.1.2 to 10.6.1  
Caution---------------------------------------------------------------------------------  
VM-1 software can be installed on Macintosh computers as described on P.111.  
More information is available in the“Software User Guide”(note that Acrobat  
Reader is required to view the“Software User Guide”under Mac OS 9).  
Copying Pictures to Your Computer  
Follow the steps below to copy pictures to your computer.  
Connect the camera to the  
computer using the supplied USB  
cable.  
1
• Turn the camera off before connecting  
the USB cable.  
• The camera turns on automatically  
when a connection is established.  
Copy photos to the computer.  
• Copy files from the camera to the  
desired location.  
2
• When an SD memory card is  
loaded, its files are displayed.  
Otherwise, files in the internal  
memory are displayed.  
9
Disconnect the USB cable when transfer is complete.  
• Drag the camera volume into the Trash and then disconnect the USB  
cable.  
3
109  
Caution---------------------------------------------------------------------------------  
• Do not turn off the camera or disconnect the USB cable during image transfer.  
• Do not use force when connecting the cable or when handling the camera with  
the cable connected. Do not attempt to transport the camera while the USB  
cable is connected.  
• You can also click [Eject] on the [Special] menu in Mac OS 9 or the [File] menu  
in Mac OS X to cancel the connection.  
• If the USB cable is disconnected without disabling the connection, the Unsafe  
Removal of Device screen may be displayed. Be sure to stop the connection  
before removing the USB cable.  
• When you connect your camera to a Macintosh computer, a file called“FINDER.  
DAT”or“.DS_Store”may be created in your SD memory card, which will appear  
as [Unmatched File] on your camera. You can delete this file from the SD  
memory card if you wish.  
Using the MP File Viewer  
When you shoot one still image with M-Cont Plus, Speed Cont, or  
Multi-trgt AF, the image is recorded as one MP file.  
By using the VM-1 MP file viewer, you can play back MP files on your  
Macintosh computer and export still images.  
This section explains how to install and uninstall the VM-1 software  
included on the supplied CD-ROM. For details on how to play back  
MP files on your computer or export still images from MP files using  
the MP file viewer, see the “Software User Guide”available from the  
supplied CD-ROM.  
9
110  
System Requirements for Using the Supplied CD-ROM  
The following environments are necessary for using the supplied CD-  
ROM. Please check your computer, or the computer’s user manual.  
Operating Systems Supported Mac OS X 10.4 to 10.6.1  
Macintosh computer  
Internal Memory  
Apple Inc. Macintosh Series  
Mac OS X 10.4 256 MB or more  
Mac OS X 10.5 512 MB or more  
Mac OS X 10.6 1GB or more  
Hard Disk Available Memory 5 MB or more  
CD-ROM Drive A CD-ROM drive compatible with the above-mentioned  
Macintosh computer  
Note-------------------------------------------------------------------------------------  
VM-1 supports Japanese, English, French and Chinese (Simplified).  
Installing VM-1  
Start your Macintosh computer and insert the supplied CD-  
ROM in the CD-ROM drive.  
1
Double-click the [RICOH] icon, the [VM-1] folder, and the  
[VM-1 Installer.pkg] icon.  
2
• The [Install VM-1] window is displayed.  
Follow the on-screen instructions to complete installation.  
3
Deleting (Uninstalling) VM-1 -----------------------------------------------------  
• Double-click [Applications], [Utilities], [VM-1 Utility], and [VM-1 Uninstaller] and  
follow the on-screen instructions.  
• If you have any other software applications running or data that has not been  
saved, quit the other software applications and save the data before uninstalling  
the software.  
9
• If an error occurs during the uninstallation process, update your Mac OS to the  
latest version.  
111  
10 Appendices  
Troubleshooting  
Error Messages  
If an error message is displayed on the screen, check the information  
on the reference page and take the corresponding action.  
Error Message  
Insert card.  
Set date.  
Cause and Solution  
No card is loaded. Insert a card.  
The date is not set. Set the date.  
Refer to  
P.22  
P.96  
The file number limit has been  
exceeded.  
The file number limit has been exceeded. Use another card. P.96  
Unmatched File  
This file cannot be displayed on the camera. Check the file  
contents on your computer, and then delete the file.  
—
Insufficient memory. Continue?  
All the files cannot be copied because there is insufficient P.20  
memory on the card. Use another card.  
Protected  
The file selected for deletion is protected.  
The card is locked (write-protected). Unlock the card.  
This file (movie or other file) cannot be selected for  
printing.  
P.89  
P.20  
—
Card Is Write-Protected.  
Print settings cannot be applied  
to this file.  
Insufficient Memory  
Files cannot be stored. Make sure there is sufficient  
memory or delete unwanted files.  
P.35,  
P.93  
The image print number limit has been exceeded. Select an P.102  
image and set the number to 0.  
Format internal memory.  
Format card.  
The internal memory requires formatting.  
The card is not formatted. Format the card with this  
camera.  
P.93  
P.93  
Card Error  
Reformat the card. If the error message still appears after P.93  
that, the card may be faulty. Do not use the card.  
Writing Data  
File not found  
Writing file to memory. Wait until writing finishes.  
There are no files that can be played back.  
—
—
Out of Memory. Cannot be stored. The number of remaining shots is 0. Switch to another card P.20  
or the internal memory.  
No files to restore.  
Can not —. *  
There are no files to restore.  
P.81  
—
Selected option can not be applied to image more than  
once, or image was created with different make of camera.  
If image was created with different make of camera,  
process image using original make of camera.  
10  
*
“—“ indicates the name of the process that can not be applied.  
112  
Camera Troubleshooting  
Power Supply  
Problem  
Cause  
Solution  
Refer to  
The camera does not  
turn on.  
The battery is exhausted or not  
inserted.  
Load the rechargeable battery  
P.21,  
correctly, or charge the battery. P. 2 2  
An unacceptable battery is used. Use the dedicated rechargeable P. 1 9  
battery. Never use any other  
battery.  
The camera is automatically  
turned off by auto power off.  
The battery is loaded in wrong  
direction.  
Turn the camera back on.  
P.23  
P.22  
—
Load correctly.  
Because the camera overheated, Wait until the temperature of  
the power was automatically  
turned off.  
the camera returns to normal. Do  
not attempt to cool the camera  
suddenly.  
The camera turns off  
during use.  
The camera was left unattended  
and unused, so auto power off  
turned it off.  
Turn the camera back on.  
P.23  
Battery is exhausted.  
Charge the rechargeable battery. P.21  
An unacceptable battery is used. Use the dedicated rechargeable P. 1 9  
battery. Never use any other  
battery.  
The camera does not  
turn off.  
Camera malfunction  
Remove the battery and load  
it again.  
P. 2 2  
The battery has been  
fully charged, but:  
• The battery symbol is  
displayed, indicating  
a low battery level.  
• The camera turns off.  
Cannot charge the  
battery.  
A (manganese dry cell or other)  
unacceptable battery is used.  
Use the dedicated rechargeable P. 1 9  
battery. Never use any other  
battery.  
Battery has reached the end of its Replace with a new rechargeable P. 2 2  
useful life.  
battery.  
—
Battery runs out  
quickly.  
It is being used at extreme high or  
low temperatures.  
Many shots are being taken in  
dark places or other location  
requiring extensive use of flash.  
—
—
—
10  
113  
Shooting  
Problem  
Cause  
Solution  
Refer to  
The camera does not  
shoot even if you press  
the shutter release  
button.  
Battery is exhausted.  
The camera is not on.  
Charge the rechargeable battery. P.21  
Press the POWER button to turn P. 2 3  
the camera on.  
The camera is in playback mode.  
P. 3 2  
Press the 6 (Playback) button  
to select the shooting mode.  
The shutter release button is not Press the shutter release button P. 2 6  
pressed all the way. all the way.  
The SD memory card is not formatted. Format the card.  
The SD memory card is full. Load a new card, or delete  
unwanted files.  
P.93  
P.22,  
P. 3 5  
P.22  
The SD memory card has reached Load a new SD memory card.  
the end of its useful life.  
The flash is charging.  
Wait until the flash mode symbol P. 2 9  
stops blinking.  
The SD memory card is locked.  
The contact surface of the SD  
memory card is dirty.  
Unlock the card.  
Wipe with a soft, dry cloth.  
P.20  
—
Unable to view the shot The image confirmation time is  
image. too short.  
Lengthen the image  
confirmation time.  
P. 9 4  
Images do not appear The camera is not on, or the  
on the picture display. picture display is dark.  
Turn the camera on, or adjust the P.23,  
brightness of the picture display. P. 9 3  
The VIDEO/AV cable is connected. Disconnect the VIDEO/AV cable.  
—
The screen display is in synchro-  
monitor mode.  
Press the DISP. button to change P. 3 8  
the display.  
Although the camera  
is set to auto focus, it is  
unable to focus.  
The lens is dirty.  
The subject is not in the center of Shoot with focus lock.  
the shooting range.  
Wipe clean with a soft, dry cloth.  
—
P.25  
It is a hard-to-focus subject.  
Shoot with focus lock or manual P.25,  
focus. P. 7 3  
Although the camera is The camera incorrectly focused  
not in focus, the green because the distance to the  
frame appears in the  
center of the picture  
display.  
Shoot with macro mode, or move P. 2 8  
away from the subject.  
subject is too close.  
The picture is blurred. You moved the camera when  
Hold camera in both hands with P. 2 5  
your elbows pressed lightly  
against your torso.  
(The J symbol  
pressing the shutter release  
button.  
appears.)  
Use a tripod.  
10  
Use the camera shake correction P. 7 0  
function.  
When shooting in a dark place  
(such as indoors), the shutter  
speed slows down and pictures  
become easily blurred.  
Use the flash.  
P. 2 9  
P. 7 8  
Raise the ISO setting.  
Use the camera shake correction P. 7 0  
function.  
114  
Problem  
Cause  
Solution  
Refer to  
The flash does not fire. The flash cannot be used in the  
To shoot with the flash, change P.29,  
Or, the flash cannot  
charge.  
following cases:  
the settings or mode.  
P. 1 1 8  
• In bracket shooting  
• In continuous mode  
• In movie mode  
• In pets mode  
• In discreet mode  
In some scene modes, the flash is  
disabled by default.  
The flash is set to flash off.  
Battery is exhausted.  
Cancel Flash Off.  
Charge the rechargeable battery. P.21  
Get closer to your subject and P.78,  
P.29  
Even though the flash The distance to the subject  
fired, the picture  
is dark.  
exceeds the flash range.  
The subject is dark.  
shoot. Change the flash mode or P. 1 2 2  
the ISO setting.  
Correct the exposure. (Exposure P. 7 6  
compensation also changes the  
light intensity of the flash.)  
The light intensity of the flash is  
not appropriate.  
Adjust the light intensity of  
the flash.  
P. 6 9  
The image is too bright. The light intensity of the flash is  
not appropriate.  
Adjust the light intensity of  
the flash. Alternatively, move  
a little away from the subject  
or illuminate the subject with  
another light source instead of  
using the flash.  
P.29,  
P. 6 9  
Subject is overexposed. (The [!AE] Correct the exposure.  
P. 7 6  
P. 6 9  
P. 9 3  
symbol appears.)  
Cancel exposure time.  
Adjust the brightness of the  
picture display.  
The brightness of the picture  
display is not appropriate.  
The image is too dark. The shot was taken in a dark place Cancel Flash Off.  
while set to flash off.  
P.29  
The subject is underexposed. (The Correct the exposure.  
P. 7 6  
P. 6 9  
P. 9 3  
[!AE] symbol appears.)  
Set the long exposure time.  
Adjust the brightness of the  
picture display.  
The brightness of the picture  
display is not appropriate.  
The image lacks natural The picture was shot in conditions Add a white object to the  
P. 7 7  
color.  
that made it difficult for auto  
composition, or use a white  
white balance to adjust the white balance setting other than auto.  
balance.  
The date or recording  
information does not  
appear on the screen.  
The brightness of the  
The screen display function is set Press the DISP. button to change P. 3 8  
to no display. the display.  
10  
Ambient lighting is poor or differs This is normal.  
—
picture display changes from that used for autofocus..  
during AF.  
115  
Problem  
Cause  
Solution  
Refer to  
The level indicator is  
not displayed.  
[Level Setting] is set to [Off] or  
[Sound].  
Set [Level Setting] to [Display] or P. 4 0  
[Display+Sound].  
The display is set to a setting other Press the DISP. button to change P. 3 8  
than normal symbol display or  
histogram.  
the display to normal symbol  
display or histogram.  
The camera is upside down (The  
shutter release button is on the  
bottom).  
Hold the camera correctly.  
—
The image is tilted even You shot the image while moving, Shoot in an environment that is  
—
—
though it was shot with such as on a amusement ride.  
not moving.  
the level indicator in  
the middle or while  
the level sound was  
sounding.  
The subject is not level.  
Check the subject.  
Self timer lamp does  
not light.  
[Pets] or [Discreet Mode] is  
selected in scene mode.  
Choose another mode.  
P.50,  
P. 5 2  
Playback/Deleting  
Problem  
Cause  
Solution  
Refer to  
Cannot play back, or the The camera is not in playback  
P. 3 2  
Press the 6 (Playback) button.  
playback screen does  
not appear.  
mode.  
The VIDEO/AV cable is not  
connected properly.  
The [Video Out Mode] setting is  
incorrect.  
Connect properly.  
P.91  
P.96  
—
Set it to the correct format.  
The contents of the SD No SD memory card is loaded, or Load a card with stored images.  
memory card cannot an SD memory card with no stored  
be played back, or the images is loaded.  
playback screen does  
not appear.  
You played back an SD memory  
card that was not formatted with and recorded with this device.  
this device.  
Load a card that was formatted P.20,  
P. 9 3  
You played back an SD memory  
card that was not recorded  
normally.  
The contact surface of the SD  
memory card is dirty.  
Load a normally recorded card.  
Wipe with a soft, dry cloth.  
—
—
—
There is something wrong with  
the SD memory card.  
Play back images from another  
card and if there is nothing  
wrong with the card, the camera  
is okay. There may be something  
wrong with the card, so do  
not use it.  
10  
116  
Problem  
The picture display  
turned off.  
Cause  
Solution  
Charge the rechargeable battery. P.21  
Turn the camera back on. P.23  
Refer to  
Battery is exhausted.  
The camera was left unattended  
and unused, so auto power off  
turned it off.  
Part of the screen  
flashes in black.  
The screen is highlighted due to an It is recommended that you shoot P.39,  
overly bright area.  
another image while avoiding  
direct sunlight and setting the  
exposure level lower (–).  
Unprotect the file.  
P. 7 6  
A file cannot be  
deleted.  
Cannot format the SD  
memory card.  
The file is protected.  
P.89  
P.20  
P.20  
The SD memory card is locked.  
The SD memory card is locked.  
Unlock the card.  
Unlock the card.  
Other Problems  
Problem  
Cause  
Solution  
Refer to  
Cannot load the SD  
memory card.  
The card is facing the wrong way. Load correctly.  
P.22  
The camera does not  
operate even when the  
buttons are pressed.  
Battery is exhausted.  
Camera malfunction  
Charge the rechargeable battery. P.21  
Press the POWER button to turn P. 2 3  
the camera off, and then press  
the POWER button to turn the  
camera on again.  
Remove the battery and load  
it again.  
P. 2 1  
The date is incorrect.  
The set date  
disappeared.  
The correct date/time are not set. Set the correct date/time.  
P.96  
P. 2 4  
The battery was removed.  
If the battery is removed for  
more than one week, the date  
setting will be lost. Make the  
settings again.  
Auto power off does  
not work.  
Auto power off is set to [Off].  
Set the time for auto power off. P.94  
The operation sound  
cannot be heard.  
[Pets] or [Discreet Mode] is  
selected in scene mode.  
The operation sound volume is  
turned off.  
Choose another mode.  
P.50,  
P. 5 2  
P. 9 4  
Use [Volume Settings] to set  
the volume to a setting other  
than mute.  
Images do not appear The [Video Out Mode] setting is  
Set it to the correct format.  
P.96  
on the TV.  
incorrect.  
The AV cable is not connected.  
The TV is not correctly set to  
VIDEO IN.  
Connect the AV cable properly.  
Check that the TV is correctly set  
to VIDEO IN.  
P.91  
—
10  
117  
Available Settings  
The following table lists the settings available in each shooting mode.  
4
S-  
AUTO  
5
3
N (Macro) *1  
F (Flash)  
✓
✓
✓
✓
—
—
✓
—
—
—
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
—
—
✓
✓
—
—
✓
—
✓
—
—
✓
—
✓
*
✓
—
✓
*
✓
—
—
✓
2
3
4
✓
*
t (Self-timer) *5  
Digital Zoom  
✓
✓
✓
✓
6
✓
✓
✓
✓
✓
✓
✓
✓
✓
*
—
—
—
✓
Dynamic Range Expansion  
—
—
✓
—
—
✓
—
—
✓
—
—
✓
—
—
✓
—
—
✓
—
—
✓
—
—
✓
Plus Normal Shooting  
Picture Quality/Size  
Movie Size  
Density  
Size  
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
✓
—
—
—
✓
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
✓
—
—
—
✓
—
—
—
✓
—
—
—
✓
—
—
—
—
—
—
—
—
—
—
—
—
—
—
✓
—
—
✓
Focus  
Multi AF *8  
Spot AF  
Face-Pri. AF *9  
Continuous AF  
Multi-trgt AF *10  
MF  
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
—
—
—
✓
—
—
✓
—
—
✓
—
—
✓
—
—
✓
Snap  
∞
✓
✓
✓
✓
Pre-AF *11  
Exposure Metering  
Image Settings  
✓
✓
✓
✓
✓
—
—
—
✓
—
—
—
✓
—
—
✓
—
—
✓
—
—
—
✓
Noise Reduction  
Flash Exposure Compensation  
✓
—
—
—
✓
—
—
—
✓
Auto Bracket *13  
—
—
—
—
—
—
✓
—
—
✓
—
—
✓
—
—
✓
Time Exposure *14  
Custom Self-Timer  
Interval Shooting *15  
—
—
—
—
—
—
—
*1 [Focus] is set to [Spot AF]. Disabled when [MF] is selected for [Focus].  
*2 Only [Flash Off] or [Auto] can be selected.  
*3 Only [Red-Eye Flash] or [Flash Synchro.] can be selected.  
*4 Only [Flash Off], [Auto] or [Flash Synchro.] can be selected.  
*5 Self-timer disabled when [Interval Shooting] is in effect. [Custom Self-Timer] is not available  
when [Focus] is set to [Multi-trgt AF].  
10  
*6 Only digital zoom (1280: up to 2.8 ×; 640 or 320: up to 4.0 ×) can be used.  
*7 Only [  
4 : 3 F] or [  
4 : 3 F] is available.  
*8 [Spot AF] used when digital zoom is in effect.  
*9 Camera selects optimal white balance; no icon is displayed. Equivalent to multi-pattern auto if  
no face is detected.  
118  
4
R
Q
N (Macro) *1  
F (Flash)  
✓
✓
✓
✓
✓
—
✓
✓
—
—
✓
—
—
—
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
—
—
✓
✓
—
—
✓
✓
✓
—
—
✓
✓
—
—
✓
✓
—
—
✓
—
✓
t (Self-timer) *5  
Digital Zoom  
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
—
✓
Dynamic Range Expansion  
—
—
✓
—
—
✓
—
—
✓
—
—
—
—
✓
—
—
—
—
✓
—
—
—
—
—
—
✓
—
—
—
—
—
—
✓
—
—
—
—
—
—
✓
—
—
—
—
—
—
✓
Plus Normal Shooting  
Picture Quality/Size  
Movie Size  
Density  
Size  
✓
7
✓
✓
*
—
—
—
✓
—
—
—
✓
—
—
—
✓
—
—
—
✓
—
—
—
✓
—
—
—
✓
✓
Focus  
Multi AF *8  
Spot AF  
Face-Pri. AF *9  
Continuous AF  
Multi-trgt AF *10  
MF  
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
—
✓
—
—
—
—
—
—
✓
—
—
—
✓
✓
✓
✓
✓
✓
✓
✓
—
—
✓
—
—
✓
—
✓
—
✓
—
✓
—
✓
—
✓
—
✓
Snap  
∞
✓
✓
✓
✓
✓
✓
—
—
✓
✓
✓
✓
✓
✓
✓
✓
✓
Pre-AF *11  
Exposure Metering  
Image Settings  
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
—
—
✓
—
—
—
✓
12  
✓
✓
✓
✓
✓
✓
✓
✓
*
✓
Noise Reduction  
✓
—
✓
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Flash Exposure Compensation  
✓
✓
—
—
—
✓
Auto Bracket *13  
—
—
✓
—
—
✓
✓
—
—
—
—
Time Exposure *14  
Custom Self-Timer  
Interval Shooting *15  
✓
✓
✓
—
—
—
—
*10 The flash cannot be used. The custom self-timer is not available. Digital zoom, [Time Exposure],  
[Custom Self-Timer], [Interval Shooting], and [Camera Shake Correction] are disabled. [Auto] is  
used for [White Balance].  
*11 Not available when [MF], [Snap],or [∞] is selected for [Focus].  
*12 Only [Color], [Black & White] or [Sepia] can be selected.  
*13 The flash cannot be used. [Time Exposure] is disabled. Not available when [Focus] is set to  
[Multi-trgt AF].  
10  
*14 [Camera Shake Correction] is disabled.  
*15 When the self-timer is set, [Interval Shooting] is disabled. Not available when [Focus] is set to  
[Multi-trgt AF].  
119  
4
S-  
AUTO  
5
3
Camera Shake Correction *16  
Slow Shutter Limit  
Date Imprint  
✓
✓
✓
✓
✓
✓
✓
✓
✓
—
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
—
—
—
—
—
—
—
—
—
—
Exposure Compensation  
White  
Multi-P AUTO  
Other than those  
above  
Balance *17  
✓
✓
✓
✓
✓
✓
✓
✓
—
—
ISO Setting  
Restore Defaults  
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
—
✓
✓
✓
—
—
✓
✓
—
—
✓
✓
—
—
✓
—
—
✓
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
✓
—
—
—
✓
—
—
—
✓
—
—
—
✓
—
—
—
✓
Set Fn Button Macro Target  
18, 19  
*
Step Zoom  
AE Lock  
AF/Face Pr. AF  
AF/Cont. AF  
AF/M-trgt AF  
AF/MF  
AF/Snap  
AT-BKT  
WB-BKT  
CL-BKT  
✓
✓
✓
✓
✓
✓
✓
✓
—
✓
✓
✓
✓
✓
—
✓
—
✓
—
✓
✓
✓
✓
✓
✓
—
✓
—
—
—
—
—
—
—
✓
—
—
✓
—
—
✓
—
—
✓
—
—
✓
—
—
✓
—
—
—
—
—
—
—
✓
✓
—
—
—
—
—
✓
—
—
—
—
✓
—
—
—
—
✓
—
—
—
—
✓
—
—
—
—
✓
—
—
—
—
✓
FOCUS-BKT  
ADJ Button Exposure Comp.  
Setting 1–4  
White Balance  
ISO  
Quality  
Focus  
Image  
Expo. Metering  
Auto Bracket  
Flash Comp.  
Density  
✓
✓
✓
✓
✓
✓
—
—
—
—
—
—
—
—
—
✓
20  
*
—
—
—
—
—
—
—
—
—
✓
—
—
—
—
—
—
—
—
✓
—
—
—
—
—
—
—
—
✓
—
—
—
—
—
—
—
—
✓
—
—
—
—
—
—
—
—
✓
—
—
—
—
—
—
—
—
✓
—
—
—
—
—
—
—
—
✓
—
—
—
—
—
—
✓
Shooting Info. Display Frame  
Other than those above  
✓
✓
✓
✓
✓
✓
✓
—
*16 Not available if [Focus] is set to [Multi-trgt AF] or when using [Time Exposure].  
*17 Not available when [Image Settings] is set to [Black & White] or [Sepia].  
*18 The Fn button can not be used for the selected function when [Miniaturize] is selected in scene  
mode.  
10  
✓
*19 The functions not marked with a checkmark ( ) can also be assigned to the Fn button, but are  
not available in scene or movie mode.  
*20 Settings other than [Discreet Mode] can not be changed in movie and scene modes.  
120  
4
R
Q
Camera Shake Correction *16  
Slow Shutter Limit  
Date Imprint  
✓
✓
✓
✓
✓
✓
✓
✓
✓
—
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
—
✓
—
✓
—
—
✓
—
✓
✓
—
✓
—
✓
✓
✓
✓
✓
✓
✓
✓
Exposure Compensation  
✓
✓
✓
✓
—
—
White  
Multi-P AUTO  
Other than those  
above  
—
—
—
—
—
Balance *17  
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
—
—
ISO Setting  
Restore Defaults  
✓
—
—
✓
✓
✓
—
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
—
✓
✓
✓
—
✓
✓
—
✓
✓
—
✓
✓
—
✓
✓
—
✓
✓
—
✓
✓
—
✓
✓
—
✓
—
—
✓
—
—
✓
Set Fn Button Macro Target  
18, 19  
*
Step Zoom  
AE Lock  
AF/Face Pr. AF  
AF/Cont. AF  
AF/M-trgt AF  
AF/MF  
AF/Snap  
AT-BKT  
WB-BKT  
CL-BKT  
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
—
✓
—
✓
—
✓
—
—
—
✓
✓
✓
✓
✓
✓
✓
✓
—
—
✓
—
—
✓
—
✓
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
✓
—
✓
—
✓
—
✓
—
✓
—
✓
—
✓
✓
✓
✓
✓
✓
✓
✓
—
✓
—
—
—
—
✓
—
—
—
—
✓
—
—
—
—
✓
—
—
—
—
✓
—
—
—
—
✓
—
—
—
—
✓
—
—
—
—
✓
—
—
—
—
✓
—
—
—
—
✓
✓
✓
FOCUS-BKT  
✓
ADJ Button Exposure Comp.  
✓
Setting 1–4  
White Balance  
ISO  
Quality  
Focus  
Image  
Expo. Metering  
Auto Bracket  
Flash Comp.  
Density  
✓
✓
✓
✓
✓
✓
✓
✓
✓
—
—
—
—
—
—
—
—
—
✓
20  
*
✓
✓
✓
✓
✓
✓
—
—
—
—
—
—
—
—
✓
—
—
—
—
—
—
—
—
✓
—
—
—
—
—
—
—
—
✓
✓
✓
—
✓
—
✓
—
✓
—
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
—
—
—
✓
—
—
—
✓
—
—
—
✓
—
—
—
✓
—
—
—
✓
—
—
—
✓
Shooting Info. Display Frame  
Other than those above  
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
10  
121  
Specifications  
No. of effective pixels (camera) Approx. 10.00 million effective pixels  
Image Sensor  
Lens  
1/2.3˝ CMOS (Approx. 10.60 total million pixels)  
4.9 mm to 52.5 mm (equivalent to 28 mm to 300 mm on a 35-mm camera)  
F3.5 to F5.6  
Focal Length  
F-aperture  
Shooting Distance Normal shooting: Approx. 30 cm to ∞ (Wide-angle) or 1.5 m to ∞  
(Telephoto) (from the front of the lens)  
Macro shooting: Approx. 1 cm to ∞ (Wide-angle), 28 cm to ∞ (Telephoto)  
or 1 cm to ∞ (Zoom macro mode) (from the front of the lens)  
Lens Construction 10 elements in 7 groups (4 aspherical lens elements with 5 surfaces)  
Zoom Magnification  
Optical zoom at 10.7 ×, Digital zoom at 4.8 ×, Auto resize zoom at approx.  
5.7 × (VGA image)  
Focus Modes  
Multi AF (Contrast AF method)/Spot AF (Contrast AF method)/Face-Priority  
AF/Continuous AF/Multi-target AF/MF/Snap/∞ (with AF Auxiliary Light)  
Image Sensor Shift Image Stabilizer  
Blur Reduction  
Shutter  
Speed  
Still Image  
8, 4, 2, 1 to 1/2000 seconds (The upper and lower limits differ for each  
shooting mode and flash mode.)  
Movie  
Exposure Exposure  
Control  
1/30 to 1/2000 seconds  
Multi Light Metering (256 segments)/Center-weighted Light Metering/  
Metering Mode Spot Metering  
Exposure Mode Program AE  
Exposure  
Compensation  
Manual exposure compensation (+2.0 to –2.0 EV in 1/3 EV Steps), Auto  
bracket function (–0.5 EV, 0, +0.5 EV)  
ISO Sensitivity (Standard  
Output Sensitivity)  
Auto/ISO 80/ISO 100/ISO 200/ISO 400/ISO 800/ISO 1600/ISO 3200  
White Balance Mode  
Auto/Multi-pattern Auto/Outdoors/Cloudy/Incandescent Lamp/Incandescent  
Lamp 2/Fluorescent Lamp/Manual Settings, White balance bracket function  
Auto flash (fires automatically in low-light conditions and when the subject  
is backlit)/Red-eye Flash/Flash On/Flash Synchro./Flash Off  
Approx. 20 cm to 4.0 m (Wide-angle), approx. 28 cm to 4.0 m (Telephoto)  
(ISO AUTO/ISO 1600, from the front of the lens)  
Flash  
Flash Mode  
Built-in flash  
Range  
Flash  
2.0 EV (1/3 EV Steps)  
Compensation  
Charging Time  
Approx. 5 seconds  
Picture Display  
Shooting Mode  
3.0˝ Transmissive LCD, approx. 920,000 dots  
Auto shooting mode/Scene auto mode/Scene mode (Portrait/Sports/Pets/  
Night. Port./Nightscape/Miniaturize/Landscape/High Sens/High Contrast  
B&W/Discreet Mode/Zoom Macro/Text Mode/Skew Correct Mode)/My settings  
mode/Movie mode/Dynamic range double shot mode/Continuous mode  
F (Fine), N (Normal)  
3648 × 2736, 3648 × 2432, 2736 × 2736, 3648 × 2048, 2592 × 1944,  
2048 × 1536, 1728 × 1296 (Multi-Picture only), 1280 × 960, 640 × 480  
1280 × 720, 640 × 480, 320 × 240  
10  
Picture Quality Mode *1  
Number of Still Image  
Recorded Multi-Picture  
Pixels  
Movie  
Text  
3648 × 2736, 2048 × 1536  
Recording Media  
SD memory card, SDHC memory card (up to 32 GB), Internal Memory (approx. 88 MB)  
122  
Recording 3648 × 2736  
N: approx. 2169 KB/Screen, F: approx. 3704 KB/Screen  
F: approx. 3295 KB/Screen  
F: approx. 2784 KB/Screen  
F: approx. 2779 KB/Screen  
F: approx. 2287 KB/Screen  
F: approx. 1474 KB/Screen  
N: approx. 603 KB/Screen  
F: approx. 812 KB/Screen  
Data  
3648 × 2432  
2736 × 2736  
3648 × 2048  
2592 × 1944  
2048 × 1536  
1728 × 1296  
1280 × 960  
640 × 480  
Capacity  
F: approx. 197 KB/Screen  
Recording Still Image  
JPEG (Exif Ver. 2.21)*2  
File Format  
Multi-Picture  
Movie  
Compliant with CIPA DC-007-2009 Multi Picture Format  
AVI (Open DML Motion JPEG Format Compliant)  
JPEG Baseline Format Compliant (Still image, movie)  
Compression  
Format  
Other Major Shooting Functions Continuous mode, Self-timer (operation time: approx. 10 seconds, approx.  
2 seconds, Custom), Interval shooting (shooting interval: 5 seconds to 1  
hour, in increments of 5 seconds)*3, Color bracket, Focus bracket, AE/AF  
target shift, Histogram display, Grid guide display, Electronic level  
Other Major Playback Functions Thumbnail view, Enlarged view (maximum ×16), Resize, Level  
Compensation, White Balance Compensation, Skew Correction, Trim, Flag  
Function, Slide show, DPOF  
Interface  
USB2.0 (High-Speed USB) Mini-B, Mass storage-compatible *4, AV output  
1.0Vp-p (75 Ω)  
Video Signal Format  
Power Supply  
NTSC, PAL  
Rechargeable Battery (DB-100): 3.7V  
Battery Consumption *5  
Usage time of DB-100: approx. 310 pictures (When [LCD Auto Dim] is set  
to [On] *6)  
Dimensions (W × H × D)  
Weight  
101.5 mm × 58.3 mm × 29.4 mm (excluding projections; measured  
according to CIPA guidelines)  
Approx. 206 g (including memory card and supplied battery)  
Approx. 185 g (camera only)  
1/4-20UNC  
Tripod Hole Shape  
Date Maintain Time  
Operating Temperature  
Operating Humidity  
Storage Temperature  
Approx. 1 week  
0 °C to 40 °C  
85% or less  
–20 °C to 60 °C  
*1 The picture quality mode that can be set varies depending on the image size.  
*2 Compatible with DCF and DPOF. DCF is the abbreviation for "Design rule for Camera File system,"  
a JEITA standard. (Full compatibility with other devices is not guaranteed.)  
*3 When the flash is set to [Flash Off].  
*4 Mass storage mode is supported by Windows 2000, Windows XP, Windows Vista, Windows 7,  
Mac OS 9.0–9.2.2, and Mac OS X 10.1.2–10.6.1.  
10  
*5 The number of remaining shots is based on the CIPA standard and may vary depending on  
usage conditions. This is for reference only.  
*6 You can take approximately 290 shots when [LCD Auto Dim] is set to [Off].  
123  
Number of Images That Can Be Stored  
The following table shows the approximate number of images that can  
be recorded in the internal memory and onto an SD memory card at  
various image size and picture quality settings.  
Internal  
Memory  
22  
38  
25  
30  
30  
34  
54  
98  
402  
22  
38  
25  
29  
29  
34  
53  
Mode  
Image Size  
1GB  
242  
2GB  
491  
842  
553  
653  
653  
758  
1182  
2118  
8778  
487  
830  
548  
647  
647  
749  
4GB  
965  
8GB  
1973  
16GB  
3953  
6769  
4452  
5257  
5257  
6101  
9503  
32GB  
7930  
13579  
8930  
10546  
10546  
12238  
19063  
4 : 3 F  
4 : 3 N  
3 : 2 F  
1 : 1 F  
16 : 9 F  
4 : 3 F  
4 : 3 F  
4 : 3 F  
4 : 3 F  
4 : 3 F  
4 : 3 N  
3 : 2 F  
1 : 1 F  
16 : 9 F  
4 : 3 F  
4 : 3 F  
4 : 3 F  
4 : 3 F  
4 : 3  
5
SCENE (other  
than Text Mode)  
S-AUTO  
(Continuous  
Mode)  
414  
272  
323  
323  
373  
581  
1059  
4316  
240  
408  
269  
319  
319  
368  
570  
1023  
3776  
414  
1078  
1653  
1087  
1284  
1284  
1490  
2321  
4160  
3379  
2222  
2624  
2624  
3045  
4744  
8505  
R
Q
17039 34181  
17237 35231 70579 141581  
957  
1957  
3333  
2202  
2596  
2596  
3008  
4654  
8221  
3922  
6678  
4412  
5202  
5202  
6026  
9324  
7867  
13396  
8851  
10435  
10435  
12089  
18704  
5 (When  
[Focus] is set to  
[Multi-trgt AF])  
1631  
1077  
1270  
1270  
1471  
2277  
4022  
1159  
2047  
7681  
842  
94  
352  
38  
16471 33042  
15082 30828 61759 123888  
1653  
4309  
SCENE (Text  
Mode)  
3379  
8809  
6769  
17647 35402  
13579  
4 : 3  
99  
2194  
1280  
3 min. 6 min. 12 min. 25 min. 50 min. 100 min.  
3 s 14 s 14 s 1 s 7 s 33 s  
8 min. 18 min. 35 min. 72 min. 145 min. 292 min.  
55 s 8 s 38 s 50 s 54 s 41 s  
3
17 s  
50 s  
640  
320  
2 min. 21 min. 44 min. 86 min. 176 min. 354 min. 710 min.  
1 s  
38  
39 s  
414  
2 s  
28 s  
44 s  
3 s  
13 s  
4 : 3 N  
4 : 3 N  
4 : 3 N  
842  
1653  
3379  
6769  
13579  
R
(M-Cont  
Plus (10M))  
(M-Cont  
Plus (2M))  
(Speed  
Cont)  
133  
705  
1438  
7553  
2926  
5746  
11745 23530 47202  
R
15359 30159 61643 123489 247716  
R
10  
124  
Note-------------------------------------------------------------------------------------  
• The maximum recording time is the estimated total recording time. The  
maximum recording time per shooting is 29 minutes.  
• The maximum number of consecutive shots that can be taken using continuous  
mode is 999. When the number of remaining shots is 1000 or more, “999”is  
displayed on the picture display.  
• The maximum numbers of shots for M-Cont Plus (2M)/M-Cont Plus (10M) and  
Speed Cont are the estimated total numbers of shots that can be recorded. The  
maximum number of shots that can be taken consecutively at one time is 26 for  
M-Cont Plus (2M) and 15 for M-Cont Plus (10M) and 120 for Speed Cont.  
• The maximum number of shots for Multi-trgt AF is the estimated total number  
of shots that can be recorded. The number of shots that can be recorded at  
one time is five. When the number of remaining shots is 9999 or more, “9999”is  
displayed on the picture display.  
• The number of remaining shots displayed on the picture display may differ from  
the actual number of shots, depending on the subject.  
• Movie recording time and the maximum number of still pictures may vary  
depending on the capacity of the recording destination (internal memory or SD  
memory card), shooting conditions, and the type and manufacturer of the SD  
memory card.  
• A high speed memory card is recommended when shooting for long periods.  
• Choose image size according to how the picture will be used:  
Image Size  
4 : 3 F /  
3 : 2 F /  
16 : 9 F  
4 : 3 F /  
4 : 3 F  
Description  
4 : 3 N / • For creating large prints.  
1 : 1 F / • For downloading to a computer for trimming and  
other processes.  
4 : 3 F  
• For creating prints.  
• For shooting a large number of pictures.  
• For shooting a large number of pictures.  
• For attaching to e-mail.  
4 : 3 F  
• For posting on a website.  
10  
125  
Defaults Settings/Functions Whose  
Defaults Are Restored When the Camera Is  
Turned Off  
Turning the camera off may reset some function settings to their  
defaults.  
The table below indicates whether or not the function is reset to its  
default when the camera is turned off.  
: setting is saved ×: setting is reset  
{
Function  
Default Settings  
Shooting  
Dynamic Range Expansion  
Plus Normal Shooting  
Picture Quality/Size  
Density  
Size (Text Mode)  
Movie Size  
Auto  
Off  
4 : 3 N  
Normal  
4 : 3  
1280  
Multi AF  
Off  
Multi  
Standard  
Auto  
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
Focus  
Pre-AF  
Exposure Metering  
Image Settings  
Noise Reduction  
Flash Exposure Compensation  
Auto Bracket  
0.0  
Off  
Off  
Time Exposure  
Custom Self-Timer  
Pictures: 2 Pics,  
Interval: 5 Sec.  
0 Sec.  
On  
Off  
Interval Shooting  
Camera Shake Correction  
Slow Shutter Limit  
Date Imprint  
Exposure Compensation  
White Balance  
ISO Setting  
Macro  
Flash  
Self-Timer  
Volume Adjustment  
×
{
{
{
{
{
{
{
{
×
Off  
0.0  
Multi-P AUTO  
Auto  
Macro Off  
Auto  
Self-Timer Off  
—
10  
Playback  
{
126  
: setting is saved ×: setting is reset  
{
Function  
Default Settings  
Setup  
LCD Brightness  
Reg. My Settings  
Step Zoom  
—
—
Off  
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
Set Fn Button  
Macro Target  
Exposure Comp.  
White Balance  
ISO  
Quality  
AUTO 1600  
On  
ADJ Button Setting 1  
ADJ Button Setting 2  
ADJ Button Setting 3  
ADJ Button Setting 4  
Maximum ISO for ISO Auto  
AF Auxiliary Light  
Operation Sounds  
Volume Settings  
LCD Confirmation Time  
Auto Power Off  
LCD Auto Dim  
Grid Guide Display Options  
Digital Zoom Image  
Level Setting  
Shooting Info. Display Frame  
Minimum Distance  
Auto Rotate  
All  
„„ꢀ (Medium)  
0.5 seconds  
5 minutes  
On  
Normal  
Display  
Off  
Show  
On  
Off  
Off  
—
White Saturation Display  
Card Sequence No.  
Date Settings  
Language/N  
Video Out Mode  
(
1)  
*
*
(
1)  
(
1)The default setting varies depending on where you purchased the camera.  
*
10  
127  
Using Your Camera Abroad  
Battery Charger (Model BJ-10)  
The battery charger can be used in regions with a current of 100-240V, 50 Hz/60 Hz.  
If you are going to travel to a country that uses a different shaped wall outlet/plug,  
please consult your travel agent on a plug adapter suitable for wall outlets in your  
country of destination.  
Do not use electrical transformers. It may damage the camera.  
Warranty  
This product was manufactured for use in the country in which it was purchased.  
The warranty is only valid in the country in which the camera was purchased.  
Should the product fail or malfunction while you are abroad, the manufacturer  
assumes no responsibility for servicing the product locally or bearing the  
expenditure incurred therefore.  
Playback on Television in Other Regions  
Playback is possible on televisions (or monitors) equipped with a video input  
terminal. Please use the AV cable provided.  
This camera is compatible with both NTSC and PAL television formats. Set the video  
format on the camera to match that of the television you are using.  
When you go abroad, set your camera to the local video format.  
10  
128  
Cautions on Use  
Cautions on Use  
• This product was manufactured for use in the country in which it was  
purchased. The warranty is only valid in the country in which the camera was  
purchased.  
• Should the product fail or malfunction while you are abroad, the  
manufacturer assumes no responsibility for servicing the product locally or  
bearing the expenditure incurred therefore.  
• Be sure not to drop or apply any sudden force to the camera.  
• While you are carrying the camera, be careful not to hit it against other  
objects. Take special care to not hit the lens and picture display.  
• Firing the flash consecutively may heat the firing unit. Do not fire it  
consecutively more than necessary.  
• Do not touch the flash and keep foreign objects away from the firing unit.  
Doing so can cause burns and fires.  
• Do not fire the flash near eyes. It could cause visual impairment (particularly  
for infants).  
• Do not fire the flash near the driver of a vehicle to avoid causing accidents.  
• The battery may become hot after extended use. Touching the battery  
immediately after use could result in burns to your fingers.  
• If the picture display or panel is exposed to sunlight, they may become  
washed out and images may become hard to view.  
• The picture display and panel may contain some pixels that do not remain  
lit up continually in part or at all. Also, the brightness may become uneven  
because of the characteristics of LCDs. These are not failures.  
• Do not forcefully press the surface of the picture display.  
• In an environment where the temperature changes suddenly, condensation  
may occur in the camera, resulting in troubles such as fogging of the glass  
surface or malfunctions of the camera. If this occurs, place the camera in a  
bag to slow the temperature change as much as possible. Take it out of the  
bag after the temperature difference from the atmosphere has decreased  
to a fairly small amount. If condensation occurs, remove the battery and  
memory card, and wait until the moisture has dried before using the camera.  
• To avoid damaging the connectors, do not put any objects into the camera’s  
microphone or speaker holes.  
10  
• Do not get the camera wet. Do not operate the camera with wet hands. This  
can result in malfunction or an electrical shock.  
• Before taking any important pictures (such as at weddings, on trips abroad,  
etc.), test the camera to check operation and ensure proper functioning. We  
recommend that you keep this manual and spare battery on hand.  
129  
Conditions in which condensation may easily occur: -----------------------  
When the camera is moved to an environment where the temperature differs greatly.  
•
• In humid places.  
• In a room immediately after being heated, or when the camera is exposed  
directly to cooled air from an air-conditioner or another similar appliance.  
Care and Storage  
Care  
•
Please note that if fingerprints, dirt, etc. get onto the lens, picture quality will suffer.  
• When dust or dirt does get on the lens, do not touch it directly with your  
fingers, and either use a blower (available in stores) to blow it off, or a soft  
cloth to gently dust it off.  
• After use at the beach or around chemicals, wipe it off particularly carefully.  
• In the unlikely event that your camera fails to work properly, please consult  
your Ricoh Repair Center.  
• There are high voltage circuits in this camera. As this is dangerous, do not  
dismantle this camera under any circumstances.  
• Do not get volatile substances, such as thinner, benzene, or pesticides on  
your camera. This may cause a change in quality, paint to peel, etc.  
• As the surface of the picture display is easily scratched, do not rub hard  
objects against it.  
• Clean the surface of the picture display by wiping gently with a soft cloth  
containing a small amount of display cleaner (that does not contain organic  
solvents) sold in stores.  
Use and Storage  
• Please avoid using or storing your camera in the following kinds of places, as  
this may damage the camera.  
• In high heat and humidity, or where there is severe change in temperature  
or humidity.  
• Places with a lot of dust, dirt or sand.  
• Places with severe vibration.  
• Places where it is in direct contact with vinyl or rubber products or chemicals,  
including mothballs or other insect repellent, for long periods of time.  
• Places with strong magnetic fields (near a monitor, transformer, magnet, etc.).  
• Remove the battery if you are not going to use the camera for a long period  
of time.  
10  
Precautions regarding care of your camera  
1. Be sure to turn the power off.  
2. Remove the batteries before caring for your camera.  
130  
Warranty and Servicing  
1. This product is backed by a limited warranty. During the warranty period mentioned  
in the Warranty supplied with your camera, any defective parts will be repaired free  
of charge. In the event of a camera malfunction, contact the dealer from which you  
purchased the camera or your nearest Ricoh Repair Center. Please note that you will be  
not be reimbursed for the cost of bringing the camera to the Ricoh Repair Center.  
2. This warranty does not cover any damage resulting from:  
failure to follow the instructions in the instruction manual;  
repair, modification or overhaul not conducted by an authorized service center listed  
in the instruction manual;  
fire, natural disaster, act of God, lightning, abnormal voltage, etc.;  
improper storage (noted in the "Camera User Guide"), leaking of battery and other  
fluids, mold, or otherwise insufficient care of the camera.  
submergence in water (flooding), exposure to alcohol or other beverages, infiltration  
of sand or mud, physical shock, dropping of the camera, or pressure on the camera,  
and other unnatural causes.  
1
2
3
4
5
3. After the warranty period has passed, you will be liable for all repair fees, including those  
incurred at an authorized service center.  
4. You will be liable for all repair fees, even within the warranty period, if the warranty card is  
not attached or if the distributor's name or the purchase date have been changed or are  
not indicated on the card.  
5. Expenses for overhaul and thorough inspection by special request of the customer will be  
charged to the customer, whether or not they are incurred during the warranty period.  
6. This warranty only applies to the camera and not to the accessories, such as the case and  
strap, nor does it apply to the battery and other consumables provided.  
7. Any consequential damages arising from failure of the camera, such as expenses incurred  
in taking pictures or loss of expected profit, will not be reimbursed whether they occur  
during the warranty period or not.  
8. The warranty is only valid in the country in which the camera was purchased.  
* The above provisions refer to repairs offered free of charge, and do not limit your legal  
rights.  
* The intention of the above provisions is also described in the warranty card provided  
with this camera.  
9. Parts essential to the servicing of the camera (that is, components required to maintain  
the functions and quality of the camera) will be available for a period of five years after  
the camera is discontinued.  
10. Please note that if the camera is seriously damaged by flooding, submergence, infiltration  
of sand or mud, violent shocks or dropping, it may not be repairable, and restoration to  
its original condition may be impossible.  
Note-------------------------------------------------------------------------------------  
• Before sending the camera in for repair, check the battery and read the  
instruction manual again to ensure proper operation.  
• Some repairs require a significant amount of time to be completed.  
10  
• When sending the camera to a service center, please include a note which  
describes the defective part and the problem as precisely as possible.  
• Remove all accessories not related to the problem before sending the camera  
to the service center.  
• This warranty does not apply to data stored on an SD memory card or in  
internal memory.  
131  
INFORMATION TO THE USER  
USA FCC Part 15 Class B  
The equipment has been tested and found to comply with the limits for a Class B  
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses, and can radiate radio frequency energy and if not installed  
and used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in  
a particular installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and on,  
then user is encouraged to try to correct the interference by one or more of the following  
measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment to an outlet on a circuit different from that to which the receiver  
is connected.  
• Consult the dealer or an experienced radio/TV technician for help. (FCC 15.105B)  
Changes or modifications not expressly approved by the party responsible for compliance  
could void the user's authority to operate the equipment. (FCC 15.21)  
Properly shielded and grounded cables and connectors must be used for connection to a  
host computer in order to comply with FCC emission limits. (FCC 15.27)  
An AC adapter with a ferrite core must be used for RF interference suppression.  
COMPLIANCE INFORMATION STATEMENT  
Product Name: DIGITAL CAMERA  
Model Number: CX3  
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions:  
(1) This device may cause harmful interference, and  
(2) This device must accept any interference received, including interference that may  
cause undesired operation.  
RICOH AMERICAS CORPORATION  
5 Dedrick Place, West Caldwell NJ, 07006 Tel.: 1-800-225-1899  
Note to Users in Canada  
Note: This Class B digital apparatus complies with Canadian ICES-003  
Remarque Concernant les Utilisateurs au Canada  
Avertissement : Cet appareil numerique de la classe B est conforme a la norme NMB-003  
du Canada  
10  
IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS  
DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE  
INSTRUCTIONS.  
132  
E
Index  
Enlarged View.....................................................34  
Error Messages................................................112  
Export Still Images...................................64, 80  
Exposure Compensation .....................71, 76  
Exposure Metering ..........................................68  
A
ADJ./OK Button..........................................15, 44  
ADJ Button Setting..................................44, 93  
Adobe Reader..................................................106  
AE/AF Target Shift.............................................45  
AE Lock....................................................................48  
AF Auxiliary Light......................................14, 93  
Auto Bracket ........................................69, 73, 74  
Auto Power Off...........................................23, 94  
Auto Rotate..........................................................95  
Auto Shooting Mode .............................13, 25  
AV Cable.........................................................12, 91  
AV Output Terminal.................................15, 91  
F
Flag Function Display.....................................80  
Flag Function Setting.............................80, 82  
Flash..........................................................14, 15, 29  
Flash Exposure Compensation.................69  
Fn (Function) Button...............................15, 46  
Focus................................................................67, 72  
Focus Bracket (FOCUS-BKT).......................75  
Format [Card] ......................................................93  
Format [Internal Memory]...........................93  
B
G
Battery .............................................................21, 22  
Battery/Card Cover..................................15, 22  
Battery Charger..........................................12, 21  
Grid Guide Display...........................................38  
Grid Guide Display Options........................95  
H
C
Handstrap..............................................................12  
High Contrast B&W..........................................51  
High Sens...............................................................51  
Histogram Display............................................42  
Camera Shake.....................................................27  
Camera Shake Correction............................70  
Card Sequence No...........................................96  
CD-ROM.......................................................12, 103  
Color Bracket (CL-BKT)...................................74  
Continuous Mode....................................13, 58  
Copy to Card from Internal Memory....81  
Custom Self-Timer............................................69  
I
Image Settings...................................................68  
Internal Memory....................................20, 124  
Interval Shooting..............................................70  
ISO Setting....................................................71, 78  
D
L
Date Imprint ........................................................71  
Date Settings...............................................23, 96  
Delete.......................................................................35  
Delete Button..............................................15, 35  
Density....................................................................67  
Digital Zoom................................................28, 98  
Digital Zoom Image........................28, 94, 98  
Direct Print............................................................99  
Discreet Mode....................................................51  
DISP. Button..................................................15, 38  
DL-10.......................................................... 103, 105  
DPOF ................................................................81, 90  
Dynamic Range  
Landscape.............................................................51  
Language/N ................................................96  
LCD Auto Dim.....................................................94  
LCD Brightness...................................................93  
LCD Confirmation Time ................................94  
Lens...........................................................................14  
Lens Cover.............................................................14  
Level Compensation...............................80, 85  
Level Indicator....................................................40  
Level Setting................................................40, 94  
M
M-Cont Plus (10M)...................................58, 59  
M-Cont Plus (2M)......................................58, 60  
Macro...............................................................15, 28  
Macro Target........................................................47  
Manual Focus (MF)...........................................73  
Double Shot Mode.............................13, 56  
Dynamic Range Expansion ................57, 67  
133  
Maximum ISO for ISO Auto ........................93  
MENU Button.............................. 15, 66, 79, 92  
Microphone .........................................................14  
Miniaturize....................................................51, 53  
Minimum Distance..........................................95  
Mode Dial..............................................................14  
Movie Mode.................................................13, 61  
Movie Size.............................................................67  
MP File.....................................................................62  
Multi-Target AF...................................................72  
My Settings Mode (MY)........................13, 97  
Shooting Menu..................................................66  
Shutter Release Button .........................14, 25  
Size.............................................................................67  
Skew Correction........................................80, 88  
Skew Correct Mode.................................51, 55  
Slide Show ............................................................80  
Slow Shutter Limit............................................71  
Speaker ...................................................................15  
Speed Cont (High)...................................58, 60  
Speed Cont (Low).....................................58, 60  
Sports.......................................................................50  
Step Zoom............................................................93  
Synchro-Monitor Mode................................38  
N
Night. Port.............................................................50  
Nightscape ...........................................................50  
Noise Reduction................................................69  
Normal Continuous Mode..........................58  
T
Text Mode .............................................................51  
Thumbnail View.................................................32  
Time Exposure....................................................69  
Trim ...................................................................80, 83  
Tripod Screw Hole............................................15  
O
Operation Sounds............................................94  
P
U
Pets............................................................................50  
PictBridge..............................................................99  
Picture Display............................................15, 16  
Picture Quality/Size.........................................67  
Playback Button......................... 15, 23, 32, 79  
Playback Menu...................................................79  
Playback Mode...........................................23, 32  
Plus Normal Shooting............................57, 67  
Portrait.....................................................................50  
POWER Button....................................................14  
Pre-AF.......................................................................68  
Protect.............................................................80, 89  
USB Cable.........................................99, 107, 109  
USB Terminal........................................................15  
V
Video Out Mode................................................96  
VM-1.......................................................................110  
Volume Settings................................................94  
W
White Balance.............................................71, 77  
White Balance Bracket (WB-BKT)............74  
White Balance Compensation..........80, 87  
White Saturation Display .....................39, 95  
White Saturation Highlights Display.....39  
R
Rechargeable Battery.............................21, 22  
Recover File..........................................................81  
Reg. My Settings........................................93, 97  
Resize .......................................................................80  
Restore Defaults ................................................71  
Z
Zoom........................................................................27  
Zoom Lever..................................................14, 27  
Zoom Macro........................................................51  
S
Scene Auto Mode (S-AUTO)...............13, 31  
Scene Mode (SCENE)..............................13, 50  
SD Memory Card............................ 20, 22, 124  
Self-timer .......................................................15, 30  
Self-Timer Lamp.................................................14  
Set Fn Button...............................................46, 93  
Setup Menu .........................................................92  
Shooting Info. Display Frame....................95  
134  
Telephone Support Numbers in Europe  
UK  
(from within the UK)  
(from outside the UK)  
0207 365 6580  
+44 207 365 6580  
Deutschland  
France  
Italia  
(innerhalb Deutschlands)  
(außerhalb Deutschlands)  
06331 268 438  
+49 6331 268 438  
(à partir de la France)  
(en dehors de la France)  
0800 88 18 70  
+33 1 60 60 19 94  
(dall'Italia)  
(dall'estero)  
02 696 33 451  
+39 02 696 33 451  
España  
(desde España)  
(desde fuera de España)  
91 406 9148  
+34 91 406 9148  
http://www.service.ricohpmmc.com/  
From environmental friendliness to environmental conservation and  
to environmental management  
Ricoh is aggressively promoting environment-  
friendly activities and also environment conservation  
activities to solve the great subject of management  
as one of the citizens on our precious earth.  
To reduce the environmental loads of digital  
cameras, Ricoh is also trying to solve the great subjects of "Saving energy by reducing power  
consumption" and "Reducing environment-affecting chemical substances contained in products".  
If a problem arises  
First of all, see "Troubleshooting" (G P.112) in this manual. If the issues still persist, please contact a Ricoh office.  
Ricoh Offices  
RICOH COMPANY, LTD.  
3-2-3, Shin-Yokohama Kouhoku-ku, Yokohama City, Kanagawa 222-8530, JAPAN  
http://www.ricoh.com/r_dc/  
RICOH AMERICAS  
CORPORATION  
5 Dedrick Place, West Caldwell, New Jersey 07006, U.S.A.  
1-800-22RICOH  
http://www.ricoh-usa.com/  
RICOH INTERNATIONAL B.V.  
(EPMMC)  
Oberrather Straße 6, D-40472 Düsseldorf, GERMANY  
(innerhalb Deutschlands)  
06331 268 438  
(außerhalb Deutschlands) +49 6331 268 438  
http://www.ricoh.com/r_dc/  
RICOH UK LTD. (PMMC UK)  
(from within the UK)  
(from outside the UK)  
0207 365 6580  
+44 207 365 6580  
RICOH FRANCE S.A.S.  
(PMMC FRANCE)  
(à partir de la France)  
(en dehors de la France)  
0800 88 18 70  
+33 1 60 60 19 94  
RICOH ESPAÑA, S.A.  
(PMMC SPAIN)  
(desde España)  
(desde fuera de España)  
91 406 9148  
+34 91 406 9148  
RICOH ITALIA srl  
(PMMC ITALY)  
(dall'Italia)  
(dall'estero)  
02 696 33 451  
+39 02 696 33 451  
RICOH ASIA PACIFIC  
21/F, One Kowloon, 1 Wang Yuen Street, Kowloon Bay, Hong Kong  
(Toll Free) +1-800-458-4029  
UK, Germany, France and Spain: (Toll Free) +800-1532-4865  
Other Countries: +44-1489-564-764  
OPERATIONS LIMITED  
About Irodio Photo & Video Studio  
North America (U.S.)  
Europe  
Asia  
+63-2-438-0090  
China  
+86-21-5385-3786  
Business hours: 9:00 AM to 5:00 PM  
Ricoh Company, Ltd.  
Ricoh Building, 8-13-1, Ginza, Chuo-ku, Tokyo  
104-8222, Japan  
2010 February  
*L756 2971*  
EN USA GB GB AE AE  
Printed in China  

RCA CC6254 User Manual
Pioneer Car Stereo System DEH 2500UI User Manual
Panasonic HDC HS250PC User Manual
Ovideon LCS3240 User Manual
Olympus PT E05 User Manual
Metz TG 73 100 MT User Manual
Kicker 4 Channel Class D Audio Amplifier CX3004 User Manual
Kenwood KDC W4534 User Manual
Kenwood Car Stereo System KDC MP3046 User Manual
JVC GZ MG360U User Manual