1 Safety
Read and understand all instructions before you
use this device. If damage is caused by failure to
follow instructions, the warranty does not apply.
•
Modification of the product could result
in hazardous radiation of EMC or other
unsafe operation.
•
•
•
The device is designed for negative ground
(earth) 12V DC operation only.
To ensure safe driving, adjust the volume to
a safe and comfortable level.
Improper fuses can cause damage or
fire.When you need to change the fuse,
consult a professional.
•
•
•
•
Use only the supplied mounting hardware
for a safe and secure installation.
To avoid short circuits, do not expose the
device to rain or water.
The device shall not be exposed to
dripping or splashing.
Do not place any sources of danger on
the device (e.g. liquid filled objects, lighted
candles).
•
•
Never insert objects into the ventilation
slots or other openings on the device.
Clean the device with soft, damp cloth.
Never use substances such as alcohol,
chemicals or household cleaners on the
device.
2
EN
Bitrates: 64-192 kbps and variable
bitrates
ID3 tagV2.0 or later
2 Your car audio
system
•
•
Unsupported files:
AAC,WAV, and PCM files
DRM protected WMA files (.wav, .m4a,
.m4p, .mp4, and .aac)
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers, register your product
WMA files in lossless format
What's in the box
Introduction
Check and identify the contents of the package:
With this system, you can:
a
d
b
e
c
•
enjoy audio from a USB storage device,
SD/SDHC card, iPod/iPhone, and external
player,
•
•
•
charge your iPod/iPhone,
listen to radio stations, and
make phone calls via Bluetooth.
f
You can enrich sound output with these sound
effects:
a Main unit (with a sleeve)
•
•
Dynamic bass boost (DBB)
Digital sound control (DSC)
b Carrying case (with front panel included)
c Trim plate
Playable media:
•
USB storage device
d Disassembly tool X 2
e ISO male connector X 2
f User manual
•
•
Compatibility: USB 2.0, USB 1.1
Class support: MSC (Mass Storage
Class)
•
Maximum capacity: 32 G
•
•
SD/SDHC card
•
Maximum capacity: 32 G
Files
•
•
•
•
File system: FAT16, FAT32
Maximum number of folders: 99
Maximum number of tracks/files: 999
Maximum level of directory: 8
.mp3 files
•
Sampling frequencies: 32 kHz, 44.1 kHz,
48 kHz
Bitrates: 8-320 kbps and variable
bitrates
•
.wma files
Versions:V4,V7,V8,V9 (L1 and L2)
Sampling frequencies: 44.1 kHz, 48 kHz
EN
3
Overview of the system
a
b
c
d
e
t srq
p
o
n m
l k j i h g
v
f
u
•
During a call, press and hold to transfer
the phone call to mobile phone.
a
•
•
Unlock the front panel.
d LCD screen
b
For .wma and .mp3 tracks on a storage
device, press to select the previous
folder.
Press and hold to access the system
menu.
e
•
•
Connect to a USB storage device.
Connect to a compatible iPod/iPhone.
•
•
f MP3-LINK
•
Connect to the audio output socket
Press to select a tuner band.
(usually the headphone socket) of an
external device.
c
•
•
Return to the previous menu.
g
For iPod/iPhone, press repeatedly to
select a control mode: control play on
the iPod/iPhone or on this system.
•
Start, pause, or resume the play of
tracks.
4
EN
•
•
In radio mode, press to select the
preset radio station of No. 6.
In radio mode, press and hold to store
the current radio station at channel
No. 6.
•
In radio mode, press and hold to store
the current radio station at channel
No. 1.
For .wma and .mp3 tracks on a storage
device, press to access the track list.
Press to access the music menu of an
iPod/iPhone.
•
•
h
i
•
•
In radio mode, press to select the
preset radio station of No. 5.
In radio mode, press and hold to store
the current radio station at channel
No. 5.
m
/DSP
•
•
•
Press repeatedly to display available
information about the current track.
Press repeatedly to display available
RDS information.
Press and hold to display the set clock.
•
•
In radio mode, press to select the
preset radio station of No. 4.
In radio mode, press and hold to store
the current radio station at channel
No. 4.
For .wma and .mp3 tracks, press
repeatedly to select a play mode: play
all tracks randomly ([SHU ALL]), play
tracks in the current folder or album
randomly ([SHU FLD]/[SHU ALBM]),
or play all tracks in sequence ([SHU
OFF]).
n AS/SOURCE
•
•
Press repeatedly to select a source.
In radio mode, press and hold to
activate the automatic search of radio
stations.
•
o
p
•
•
Press repeatedly to select a preset
sound equalizer.
Press and hold to activate the setup of
bass, treble, balance, and fader.
j
k
l
•
•
•
•
•
Press to turn on the system.
Press and hold to turn off the system.
Press to mute or restore sound.
Press to confirm an option.
Rotate to switch between menu
options.
•
•
In radio mode, press to select the
preset radio station of No. 3.
In radio mode, press and hold to store
the current radio station at channel
No. 3.
•
For .wma and .mp3 tracks, press
repeatedly to select a repeat mode.
•
Rotate to adjust the volume level.
q
r
•
•
•
For .wma and .mp3 tracks on a storage
device, press to select the next folder.
Press and hold to activate the selection
of listening zones.
•
•
In radio mode, press to select the
preset radio station of No. 2.
In radio mode, press and hold to store
the current radio station at channel
No. 2.
Press to select a tuner band.
•
•
For .wma and .mp3 tracks on a storage
device, press to access the folder list.
/
•
•
Tune to a radio station.
Press to skip to the previous/next
track.
Press and hold to rewind a track or
search fast forward.
In radio mode, press to select the
preset radio station of No. 1.
•
EN
5
s
t
•
•
Press to enable or disable the
maximum volume.
Press and hold to enable or disable
the DBB (dynamic bass boost) sound
effect.
•
•
•
Press to answer or redial a call.
Press to hang up a call.
Press and hold to reject an incoming
call.
u Slot for SD/SDHC card
Insert an SD/SDHC card.
•
v RESET
•
Press to reboot the system.
6
EN
3 Install the car
audio system
Connect wires
Note
• Make sure that all loose leads are insulated with
electrical tape.
• Consult a professional to connect wires as instructed
below.
Caution
• Use the controls only as stated in this user manual.
1 Check the car's wiring carefully and
connect them to the the supplied ISO
male connectors.
Always follow the instructions in this chapter in
sequence.
These instructions are for a typical installation.
However, if your car has different requirements,
make the adjustment accordingly. If you have
any question regarding installation kits, consult
your local retailer.
Note
• This system is designed for negative ground (earth) 12V
DC operation only.
• Always install this system in the car dashboard. Other
locations can be dangerous as the rear of the system
heats up during use.
• To avoid short-circuit: before you connect, make sure
that the ignition is off.
• Make sure that you connect the yellow and red power
supply leads after all other leads are connected.
• Make sure that all loose leads are insulated with
electrical tape.
• Make sure that the leads do not get caught under
screws iron parts that will move (e.g. seat rail).
• Make sure that all ground (earth) leads are run to a
common ground (earth) point.
ISO male
connectors
Connect to
1
2
3
4
e
f
Green strip, black-
edged green strip
White strip, black-
edged white strip
Gray strip, black-
edged gray strip
Purple strip, black-
edged purple strip
Red strip
Rear left speaker
Front left speaker
Front right speaker
Rear right speaker
• Use only the supplied mounting hardware for a safe
and secure installation.
• Improper fuses can cause damage or fire.When you
need to change the fuse, consult a professional.
• When you connect other devices to this system, make
sure that the rating of the car circuit is higher than the
total fuse value of all the connected devices.
• Never connect speaker wires to the metal body or
chassis of the car.
Ignition key +12V
DC when ON/ACC
Motor/electric
antenna relay control
lead
• Never connect speaker wires with stripes to one
another.
Blue strip
g
Blue strip, white strip Amplifier relay
control lead
h
Black strip
Ground
EN
7
ISO male
connectors
Connect to
Mount into the dashboard
i
Yellow strip
To the +12V car
battery which is
energized at all times
•
If the car does not have an on-board drive
or navigation computer, disconnect the
negative terminal of the car battery.
If the car battery is not disconnected, to
avoid short-circuit, make sure that the bare
wires do not touch each other.
•
2 Connect the antenna and amplifier as
illustrated, if applicable.
1 Make sure that the car dashboard opening
is within these measurements:
L
REAR
R
5mm
183 mm
53mm
d
c b
a
Sockets on rear
panel
External sockets or
connectors
2 Remove the mounting sleeve with the
1
For ISO male
connectors
REAR L
REAR R
ANTENNA
As indicated above
supplied disassembly tools.
2
3
4
Rear left speaker
Rear right speaker
Antenna
Tip
• The pin arrangement for the ISO connectors depends
on the type of your vehicle.To avoid damage to the
unit, connect properly.
8
EN
3 Install the sleeve into the dashboard and
bend the tabs outward to fix the sleeve.
53.5 m m
183 mm
6 Reconnect the negative terminal of the car
battery.
4 Slide the unit into the sleeve until you hear
Attach the front panel
a "click".
1 Insert the notch on the front panel to the
chassis on the main unit.
2 Press the left end of the front panel
inwards until it is securely locked with a
"click".
5 Attach the trim plate.
EN
9
Detach the front panel
Note
• Before you insert an SD/SDHC card or reset the
system, detach the front panel.
• Before you detach the front panel, make sure that the
system is turned off.
1 Press
to release the front panel.
2 Pull the front panel outwards to remove it.
10 EN
4 Get started
Set the clock
1 Press and hold
to access the system
menu.
2 Press
/
repeatedly until [CLK] is
For the first time use
displayed with time digits blinking.
3 Rotate
4 Rotate
anti-clockwise to set the hour.
clockwise to set the minute.
1 Press
to turn on the system.
» [PHILIPS] is displayed and then
[SELECT OPERATING REGION]
(select a radio region) scrolls.
Display the clock
2
When one of the following options is
Press and hold /DISP until [CLK] and the set
clock are displayed.
displayed, rotate
to select a radio
region that matches your location.
•
To exit the clock display, press any button
or rotate
•
•
•
•
•
•
•
•
[AREA EUROPE] (Western Europe)
[AREA ASIA] (Asia Pacific)
[AREA MID--EAST] (Middle East)
[AREA AUST] (Australia)
.
Select a source
[AREA RUSSIA] (Russia)
[AREA USA] (United States)
[AREA LATIN] (Latin America)
[AREA JAPAN] (Japan)
Press AS/SOURCE repeatedly to select a
source.
•
•
[RADIO]: Listen to FM/AM radio.
[MP3--LINK]: Listen to the audio input
through the MP3-LINK socket.
3 Press
to confirm.
» The system switches to radio mode
automatically.
•
•
•
[USB]:When a USB storage device or
compatible iPod/iPhone is connected and
recognized, you can select this source to
play audio files that are stored on it.
[SD/SDHC]:When an SD/SDHC card is
inserted and recognized, you can select this
source to play audio files that are stored
on it.
[BT AUDIO]:When a Bluetooth player
is connected, you can select this source
to transfer audio from the player to this
system via Bluetooth.
•
To turn off the system, press and hold
until the screen backlight is off.
Set the time format
1 Press and hold
to access the system
menu.
2 Press
or [CLK 12H] is displayed.
3 Rotate to select [CLK 24H] or [CLK
12H].
/
repeatedly until [CLK 24H]
•
•
[CLK 24H]: 24-hour time format
[CLK 12H]: 12-hour time format
EN 11
Select a listening zone
1 Press and hold
until one of the
following options is displayed.
•
•
•
[ALL]: For all passengers
[FRONT-L]: For the front-left seat only
[FRONT-R]: For the front-right seat
only
•
[FRONT]: For front passengers only
2 Press
/
repeatedly to select a
listening zone.
Mute the button beep
The beep sound of buttons is enabled by
default.
1 Press and hold
to access the system
menu.
2 Press
/
repeatedly until [BEEP ON]
or [BEEP OFF] is displayed.
•
[BEEP ON]: Enable the beep sound of
buttons.
•
[BEEP OFF]: Mute the beep sound of
buttons.
3 Rotate
to change the setting.
12 EN
5 Listen to radio
Search for a radio station
Search for a radio station
automatically
Select a tuner region
Press
or
to search for the previous or
next radio station with strong signals.
You can select a radio region that matches your
location.
1 In radio mode, press and hold
to access
Search for a radio station manually
the system menu.
1 Press and hold
or
or
until [M] blinks.
2 Press
/
repeatedly until one of the
2 Press
repeatedly until the target
following options is displayed.
frequency is displayed.
•
•
•
•
•
•
•
•
[AREA EUROPE] (Western Europe)
[AREA ASIA] (Asia Pacific)
[AREA MID--EAST] (Middle East)
[AREA AUST] (Australia)
Store radio stations in
memory
[AREA RUSSIA] (Russia)
[AREA USA] (United States)
[AREA LATIN] (Latin America)
[AREA JAPAN] (Japan)
Note
3 Rotate
to select a region.
• You can store a maximum of six stations in each band.
Select a tuner sensitivity
Store radio stations automatically
To search for radio stations with strong signals
only or more radio stations, you can change the
tuner sensitivity.
1 Switch the source to [RADIO].
2 Press
or
repeatedly to select a band.
1 Press and hold
to access the system
3 Press and hold AS/SOURCE until
menu.
[STORE---] is displayed.
2 Press
/
repeatedly until [LOC ON]
» After the search is complete, the
first stored radio station is broadcast
automatically.
or [LOC OFF] is displayed.
3 Rotate
to select a setting.
[LOC ON]: Search for radio stations
with strong signals only.
•
•
To select a stored radio station, press
, , or
,
,
,
.
•
[LOC OFF]: Search for radio stations
with strong and weak signals.
EN 13
3 Press
to access the list of program
Store radio stations manually
types.
1 Press
or
repeatedly to select a
4 Rotate
to select a program type, and
tuner band.
then press
to confirm.
2 Tune to the radio station that you want to
Item Program
type
Description
store.
3 Press and hold
,
,
,
,
1
2
NEWS
AFFAIRS
News services
Politics and current
affairs
, or to store the radio station at the
selected channel.
3
INFO
Special information
programs
Play with RDS
4
5
SPORT
EDUCATE
Sports
Education and advanced
training
Radio plays and
literature
Culture, religion and
society
Science
Entertainment programs
Pop music
The RDS (Radio Data System) function
operates only in areas with FM stations
broadcasting RDS signals. If you tune to an RDS
station, the station name is displayed.
6
DRAMA
7
CULTURE
Enable the RDS function
8
9
SCIENCE
VARIED
POP M
Note
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
• The RDS function is enabled by default.
• Only when the RDS function is enabled, RDS related
settings can be accessed.
ROCK M
EASY M
Rock music
Light music
Light classical music
Classical music
Special music programs
Weather
LIGHT M
CLASSICS
OTHER M
WEATHER
FINANCE
1 Press and hold
to access the system
menu.
2 Press
/
repeatedly until [RDS ON]
Finance
or [RDS OFF] is displayed.
3 Rotate to select [RDS ON].
» The RDS function is enabled.
CHILDREN Children’s programs
SOCIAL
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
COUNTRY Country Music
NATION M National Music
OLDIES
FOLK M
DOCUMENT Documentary
Social Affairs
Religion
Phone In
Travel
Leisure
Jazz Music
•
To disable the RDS function, rotate
to select [RDS OFF].
Select a program type
Before tuning to RDS stations, you can select
a program type to search for programs of the
selected category only.
Oldies Music
Folk Music
1 Press and hold
to access the system
menu.
TEST
ALARM
AlarmTest
Alarm
2 Press
displayed.
/
repeatedly until [PTY] is
14 EN
Tip
Use alternate frequencies
If the signal of an RDS station is poor, enable
the AF (Alternate Frequency) function to search
for another station that broadcasts the same
program.
• When a traffic announcement cuts in, you can press
to switch the system to the previous mode.
1 Press and hold
to access the system
Synchronize the system clock
menu.
You can synchronize the system clock with an
RDS station that transmits time signals.
2 Press
/
repeatedly until [AF ON] or
[AF OFF] is displayed.
1 Press and hold
to access the system
3 Rotate
to select a setting.
[AF ON]: Enable the AF function.
menu.
•
•
[AF OFF]: Disable the AF function.
2 Press
/
repeatedly until [CT ON]
or [CT OFF] is displayed.
to select a setting.
[CT ON]: Synchronize the
Set the region for AF tuning
You can set the region for AF tuning.
3 Rotate
•
•
1 Press and hold
to access the system
system clock with the RDS station
automatically.
[CT OFF]:The automatic clock
synchronization with RDS station is
disabled.
menu.
2 Press
/
repeatedly until [REG ON]
or [REG OFF] is displayed.
3 Rotate
to select a setting.
[REG ON]: Only RDS stations in
current region can be tuned to
automatically.
[REG OFF]:All RDS stations can be
tuned to automatically.
•
Tip
• The accuracy of time depends on the RDS station that
transmits time signals.
•
Receive traffic announcement
If you want to receive traffic announcement,
enable theTA (Traffic Announcement) function.
1 Press and hold
to access the system
menu.
2 Press
/
repeatedly until [TA ON] or
[TA OFF] is displayed.
to select a setting.
[TA ON]:When a traffic
3 Rotate
•
announcement is on air, the system
automatically switches to the tuner
mode and begins to broadcast the
traffic announcement.When the traffic
announcement is over, the system
returns to the previous mode.
[TA OFF]:Traffic announcement does
not cut in.
•
EN 15
2 Switch the source to [USB] or [SD/
6 Play from a
storage device
SDHC].
•
When a USB storage device is
connected and recognized, the
system switches the source to [USB]
automatically.
This system can play .mp3 and .wma files that
are copied onto a compatible storage device.
3 If the play does not start, press
.
Note
Control play
• Philips does not guarantee compatibility with all storage
devices.
• NTFS (NewTechnology File System) file system is not
supported.
Button
/
Function
Press repeatedly to select a
folder.
Pause or resume play.
/
/
Press to play the previous or
next track.
Press and hold to rewind a track
or search forward fast.
Press repeatedly to display
available information about the
current track.
/DISP
Press repeatedly to select a
repeat mode:
• [REP ONE]: repeat the cur-
rent track,
• [RPT FLD]: repeat all tracks in
the current folder, or
• [RPT ALL]: repeat all tracks in
the storage device.
Press repeatedly to select a play
mode:
• [SHU ALL]: play all tracks
randomly,
• [SHU FLD]: play tracks in the
current folder randomly, or
• [SHU OFF]: play all tracks in
the storage device in sequence.
1 Connect a compatible USB storage device
or SD/SDHC card.
•
For an SD/SDHC card, detach the
front panel first, insert the card into
the card slot, and then attach the front
panel.
16 EN
Switch tracks
During play, you can switch tracks or folders
quickly.
Switch tracks directly
1 Press
to access the track list.
» The file name of current track scrolls.
2 Rotate
3 Press
to toggle through tracks.
to play the selected track.
Switch folders for a track
1 Press
to access the folder list.
» [ROOT] scrolls.
2 Rotate to toggle through folders.
» The name of current folder scrolls.
3 Press
to select the folder.
4 Rotate
to toggle through tracks in the
folder.
5 Press
to play the selected track.
EN 17
» The system starts playing tracks that
7 Play from an
iPod/iPhone
are stored on your iPod/iPhone.
Note
• Before you disconnect the iPod/iPhone, switch the
system to another source.
Note
• During play, no audio signals are transferred through
the headphone socket of your iPod/iPhone.
Control play
Button
Function
Compatible iPod/iPhone
models
Press repeatedly to select a
control mode: control play on
your iPod/iPhone, or on the
system.
This car audio system supports the following
iPod and iPhone models.
Press to pause or resume play.
•
iPhone 4S, iPhone 4, iPhone 3GS, and
iPhone 3G
/
/
Press to play the previous or next
track.
•
•
•
iPod touch (2nd, 3rd, and 4th generations)
iPod classic
iPod nano (3rd, 4th, 5th, and 6th
generations)
Press and hold to rewind a track
or search forward fast.
Press repeatedly to display
available information about the
current track.
/DISP
Press repeatedly to select a repeat
mode:
Connect your iPod/iPhone
• [REP ONE]: repeat the current
track, or
• [REP ALL]: repeat all tracks.
Press repeatedly to select a play
mode:
• [SHU ALL]: play all tracks
randomly,
• [SHU ALBM]: play tracks in the
current album randomly, or
• [SHU OFF]: play all tracks in the
iPod/iPhone library in sequence.
Connect an Apple 30-pin USB cable to:
•
the USB socket on the front panel of this
system, and
•
your iPod/iPhone.
» [USB] is displayed.
18 EN
Search for a track
After accessing the iPod/iPhone menu, you can
select a specific track quickly.
1 Press
to access the iPod/iPhone menu.
» [PLAYLIST] scrolls.
2 Rotate
to select a category.
3 Press
to access the list of tracks
under the category.
» The file name of the first track scrolls.
4 Rotate
to select a track.
» The file name of current track scrolls.
5 Press
to start play.
Charge your iPod/iPhone
Once the iPod/iPhone is docked and
recognized, the charging starts.
EN 19
» If the connection fails, [FAILED] is
displayed on the LCD screen of this
system.
8 Use Bluetooth
devices
Disconnect a device
With this car audio system, you can listen to
audio from a player or make a call through
Bluetooth.
1 Press and hold
to access the system
menu.
2 Press
/
repeatedly until [DIS--
CON] is displayed.
3 Press
.
Connect a device
» [WAIT] is displayed with -, --,
and --- blinking alternately until
[DISCONNECTED] scrolls.
Note
• Philips does not guarantee the compatibility with all
Bluetooth devices.
Tip
• Before pairing a device with this system, read its user
• You can also complete the disconnection on your
device.
manual for Bluetooth compatibility.
• Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
• At one time, you can connect only one Bluetooth
device to this system.
Reconnect a device
• The operational range between this system and a
Bluetooth device is approximately 3 meters (9 feet).
• Any obstacle between this system and a Bluetooth
device can reduce the operational range.
• Keep away from any other electronic device that may
cause interference.
Some Bluetooth devices support the automatic
reconnection with a paired Bluetooth device.
If your device does not support automatic
reconnection, reconnect it with this system
manually.
On your device, follow the steps below.
1 Search for Bluetooth devices.
2 In the device list, select CE152.
1 Press and hold
to access the system
menu.
2 Press
is displayed.
3 Press
/
repeatedly until [RE--CON]
3 Enter the default password "0000", and
then confirm the password entry.
» If the pairing succeeds, [PAIRED] is
displayed on the LCD screen of this
system.
.
» [WAIT] is displayed with -, --,
and --- blinking alternately until
[CONNECTED] scrolls or [FAILED]
appears.
4 Enable or permit the connection with
CE152.
» If [CONNECTED] scrolls, this system
is reconnected to the last connected
device.
» If the connection succeeds,
[CONNECTED] scrolls and
is
displayed on the LCD screen of this
system.
Tip
• You can also complete the reconnection on your
device.
20 EN
Redial the last called number
Play audio from a Bluetooth
device
1 Press .
» [REDIAL] is displayed.
If the connected Bluetooth device supports
Advanced Audio Distribution Profile (A2DP),
you can listen to tracks that are stored on the
device through the system. If the device also
supports AudioVideo Remote Control Profile
(AVRCP) profile, you can control play on the
system or with its remote control.
2 Press
to confirm.
» [CALLING] is displayed.
Pick up an incoming call
When the system receives an incoming call, the
phone number or [PHONE IN] is displayed.
Press to answer the call.
1 Play a track on the connected device.
2 Press AS/SOURCE repeatedly to switch
the source to [BT AUDIO].
Reject an incoming call
» Play starts automatically.
•
•
To pause or resume play, press
To skip to the previous or next track,
press
.
Press and hold until [END] is displayed.
/
.
End a call
To end an on-going call, press
.
Note
• If the connected device does not support the AVRCP
profile, control play on the connected device.
Transfer a call to mobile phone
By default, the voice comes from the
loudspeakers during a call.
1 Press and hold until [TRANSFER] is
displayed.
Make a call
» The loudspeakers are muted, and the
voice comes from your mobile phone
only.
Note
2 Take up your mobile phone for the
• Keep the Bluetooth connection active between the
system and your mobile phone.
conversation.
Call a number
On your mobile phone, call a number.
» [CALLING] is displayed.
EN 21
9 Listen to an
external player
You can use the system to amplify the audio
input from an external player, for example, MP3
player.
MP3-LINK
1 Switch the source to [MP3--LINK].
2 Connect an MP3 link cable to
•
•
the MP3-LINK socket on the system,
and
the audio output socket (usually the
headphone socket) on the external
player.
3 Play the external player.
22 EN
10 Adjust sound
The following operations are applicable to all
supported media.
Button Function
Rotate to increase or decrease the
volume level.
Press to mute or restore sound.
Press to enable or disable the
maximum volume.
Press and hold to enable or disable
the Dynamic Bass Boost (DBB) effect.
Press repeatedly to select a sound
equalizer.
1Press and hold to activate the setup
of customized sound equalizer.
2Press repeatedly to select an option:
[BAS] (bass), [TRE] (treble), [BAL]
(balance), or [FAD] (fader).
3Rotate
to adjust the setting.
EN 23
11 Additional
information
L
REAR
R
Reset the system
If the system works abnormally, reset the
system to factory default settings.
Note
• If the fuse gets damaged immediately after it is
replaced, an internal malfunction may occur. In such
case, consult your Philips retailer.
1 Detach the front panel.
2 Press the RESET button with the tip of a
ball-point pen or toothpick.
» All settings are reset to factory default.
Replace the fuse
If there is no power, check the fuse and replace
it if it is damaged.
1 Check the electric connection.
2 Remove the damaged fuse from the rear
panel.
3 Insert a new fuse with the same
specifications (15 A).
24 EN
Bluetooth
12 Product
information
Output
power
Frequency
band
Class 2
2.4000 GHz - 2.4835 GHz ISM
Band
Note
Range
Standard
3 meters(free space)
Bluetooth 2.0 specification
• Specifications are subject to change without prior
notice.
General
Power supply
12V DC (11V - 16V),
negative ground
15 A
Fuse
Suitable speaker
impedance
Maximum power
output
4 - 8
50 W x 4 channels
Continuous power
output
Pre-Amp output
voltage
22 W x 4 RMS
(4 10%T.H.D.)
2.0V
Aux-in level
500 mV
Radio
Frequency range
- FM
87.5 - 108.0 MHz
(100kHz per step in
auto search and 50kHz
per step in manual
search)
Usable sensitivity -
FM (S/N = 20 dB)
Frequency range -
AM(MW)
8 µV
522 - 1620 KHz (9 kHz)
530 - 1710 kHz (10
kHz)
Usable sensitivity -
AM(MW) (S/N =
20 dB)
30 µV
EN 25
Cannot switch the source to iPod/iPhone
13 Troubleshooting
•
•
•
Check whether the iPod/iPhone is securely
connected.
Check whether the iPod/iPhone is
compatible with this system.
Check whether the iPod/iPhone battery is
nearly empty. Connect it to this system for
charging first.
Warning
• Never remove the casing of this product.
To keep the warranty valid, never try to repair
the product yourself.
Display shows ERR-12.
•
Data error. Check the USB storage device
or SD/SDHC card.
If you encounter problems when using this
product, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support).When you contact Philips,
make sure that the product is nearby and the
model number and serial number are available.
About the Bluetooth device
Music playback is unavailable on the system
even after successful Bluetooth connection.
•
The device cannot be used with the
system to play music.
General
The audio quality is poor after connection
with a Bluetooth-enabled device.
No power or no sound
•
The power supply from car battery is cut
off, or the car battery runs out of energy.
Power the system with car battery.
Car engine is not on.Turn the car engine
on.
•
The Bluetooth reception is poor. Move
the device closer to the system or remove
any obstacle between the device and the
system.
•
•
Cannot connect with the system.
Cable is not correctly connected. Check
connections.
•
The device does not support the profiles
required for the system.
•
•
•
The fuse is burnt. Replace the fuse.
Volume is too low.Adjust volume.
If the above solutions do not work, press
the RESET button.
•
The Bluetooth function of the device is
not enabled. Refer to the user manual of
the device to find out how to enable the
function.
•
Make sure that the current track is in a
compatible format.
•
•
The system is not in the pairing mode.
The system is already connected with
another Bluetooth-enabled device.
Disconnect that device or all other
connected devices and then try again.
Noise in broadcasts
•
Signals are too weak. Select other stations
with stronger signals.
•
Check the connection of the car antenna.
The paired mobile phone connects and
disconnects constantly.
Preset stations are erased.
•
Battery cable is not correctly connected.
Connect the battery cable to the terminal
that is always live.
•
The Bluetooth reception is poor. Move
the mobile phone closer to the system or
remove any obstacle between the mobile
phone and the system.
26 EN
•
•
Some mobile phones may connect and
disconnect constantly when you make
or end calls.This does not indicate any
malfunction of the system.
For some mobile phones, the Bluetooth
connection may be deactivated
automatically as a power-saving feature.
This does not indicate any malfunction of
the system.
EN 27
Environmental information
14 Notice
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
Compliance
Trademark notice
This product complies with the radio
interference requirements of the European
Community.
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Philips is
under license.
Care of the environment
Windows Media and the Windows logo
are trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
“Made for iPod” and “Made for iPhone”
mean that an electronic accessory has been
designed to connect specifically to iPod or
iPhone respectively, and has been certified by
the developer to meet Apple performance
standards.Apple is not responsible for the
operation of this device or its compliance with
safety and regulatory standards. Please note that
the use of this accessory with iPod or iPhone
may affect wireless performance.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC. Please inform yourself about the local
separate collection system for electrical and
electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries.
Other trademarks and trade names are those
of their respective owners.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
28 EN
Copyright
2012 © Koninklijke Philips Electronics N.V.
Specifications are subject to change without
notice.Trademarks are the property of
Koninklijke Philips Electronics N.V or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
The making of unauthorized copies of copy-
protected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
EN 29
15 Glossary
M
MP3
A file format with a sound data compression
system. MP3 is the abbreviation of Motion
Picture Experts Group 1 (or MPEG-1) Audio
Layer 3.
S
SD
Secure Digital.A type of memory card with a
flash memory.
SDHC
Secure Digital High Capacity (SDHC) is a type
of flash memory card based on the SDA 2.00
specification.The SDA 2.00 specification enables
SD cards to reach higher capacities from 4GB
to 32GB, and growing.
W
WMA (Windows Media Audio)
An audio format owned by Microsoft, is a
part of Microsoft Windows Media technology.
Includes Microsoft Digital Rights Management
tools,Windows MediaVideo encoding
technology, and Windows Media Audio
encoding technology.
30 EN
Specifications are subject to change without notice
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
CE152_10_UM_V1.0
|