Notice
1 Important
Safety
The making of unauthorized copies of
copy-protected material, including computer
SURJUDPVꢁꢀÀOHVꢁꢀEURDGFDVWVꢀDQGꢀVRXQGꢀ
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
ꢀ Read and understand all instructions
before you use your apparatus. If damage
is caused by failure to follow instructions,
the warranty does not apply.
ꢀ This apparatus is designed for negative
ground (earth) 12 V DC operation only.
ꢀ To ensure safe driving, adjust the volume
to a safe and comfortable level.
This apparatus includes these labels:
ꢀ Improper fuses can cause damage or
ÀUHꢂꢀ:KHQꢀ\RXꢀQHHGꢀWRꢀFKDQJHꢀWKHꢀIXVHꢁꢀ
consult a professional.
ꢀ Use only the supplied mounting hardware
for a safe and secure installation.
ꢀ To avoid short circuit, do not expose the
apparatus, remote control or remote
control batteries to rain or water.
Class II equipment symbol
ꢀ Never insert objects into the ventilation
slots or other openings on the apparatus.
ꢀ Clean the apparatus and frame with a
soft, damp cloth. Never use substances
such as alcohol, chemicals or household
cleaners on the apparatus.
This symbol indicates that the apparatus has a
double insulation system.
ꢀ Never place any objects other than discs
into the apparatus.
ꢀ Never use solvents such as benzene,
thinner, cleaners available commercially,
or anti-static sprays intended for discs.
ꢀ Visible and invisible laser radiation when
open. Avoid exposure to beam.
ꢀ Risk of damage to the apparatus screen!
Never touch, push, rub or strike the
screen with any object.
Caution
Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
4
EN
Environmental information
Recycling
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
$Q\ꢀFKDQJHVꢀRUꢀPRGLÀFDWLRQVꢀPDGHꢀWRꢀWKLVꢀ
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
2009 © Koninklijke Philips Electronics N.V. All
rights reserved.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
6SHFLÀFDWLRQVꢀDUHꢀVXEMHFWꢀWRꢀFKDQJHꢀZLWKRXWꢀ
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed of with normal household
waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment
and human health.
This product complies with the radio
interference requirements of the European
Community.
This product complies with the requirements
of the following directives and guidelines:
2004/108/EC + 2006/95/EC.
EN
5
a
b
2 Your car audio
system
Congratulations on your purchase, and
ZHOFRPHꢀWRꢀ3KLOLSVꢃꢀ7RꢀIXOO\ꢀEHQHÀWꢀIURPꢀWKHꢀ
support that Philips offers, register your product
c
f
d
g
e
h
Introduction
With the in-car audio system, you can enjoy
your drive while you listen to:
ꢀ FM or AM (MW) radio
ꢀ Audio from CD or MP3 disc
ꢀ Audio from external devices
i
j
k
What’s in the box
Check and identify the contents of your
package:
a In-car audio system
b Remote control
c Rubber cushion
d Screw (4 pieces)
e Disassembly tool ( 2 pieces)
f Front panel
g Trim plate
h Carrying case for front panel
i User manual
j Quick start guide
k Standard connector
6
EN
Overview of the main unit
e MENU / DISP
a
ꢀ Display radio frequency, clock and
radio program type (if available).
ꢀ Display track, elapsed time, artist,
DOEXPꢁꢀWLWOHꢁꢀIROGHUꢁꢀÀOHꢀDQGꢀFORFNꢂꢀ
ꢀ Access system menu.
ꢀ Select tuner band.
ꢀ Select MP3/WMA folder.
ꢀ Scroll up or down menu.
b DBB
ꢀ Turn on or off Dynamic Bass Boost
(DBB) sound.
f
ꢀ Return to previous menu.
ꢀ Stop search.
ꢀ Disable screen blackout.
c SOURCE
ꢀ Select audio source.
d
/MUTE
ꢀ Turn the unit on or off.
ꢀ Adjust volume.
ꢀ &RQÀUPꢀVHOHFWLRQꢂ
ꢀ Enter characters for search.
ꢀ Mute or restore volume.
g Display panel
h
ꢀ Unlock the panel
i External device socket
EN
7
j 6
ꢀ Select preset station no. 6
Overview of the remote
control
k 5
ꢀ Select preset station no. 5
l SHUF, 4
ꢀ $FWLYDWHꢀRUꢀGHDFWLYDWHꢀVKXIÁHꢀPRGHꢂ
ꢀ Select preset station no. 4
q
p
a
b
m 3, REP
o
ꢀ Set repeat play mode.
ꢀ Select preset station no. 3
n
m
n INTRO, 2
c
d
e
ꢀ Turn intro play on or off.
ꢀ Select preset station no. 2
l
k
o 1,
f
ꢀ Start play
ꢀ Pause or resume play.
ꢀ Select preset station no. 1
g
j
h
i
p
/
ꢀ Tune to a radio station
ꢀ Skip/search for a track.
q EQ/Audio
ꢀ Select equalizer (EQ) setting.
ꢀ Access audio setting menu.
a SOURCE
r SEARCH
ꢀ Select audio source.
ꢀ Store radio stations automatically.
ꢀ Search a track or folder.
b VOLUME +/-
ꢀ Adjust volume.
s Panel power connection
c EQ
t Disc slot
ꢀ Select EQ setting.
u
d DBB
ꢀ Take disc out.
ꢀ Turn on or off Dynamic Bass Boost
(DBB) sound.
v RESET
ꢀ Restore default settings.
e 3, REP
ꢀ Select repeat play mode.
ꢀ Select preset station no. 3.
f SEARCH
ꢀ Store radio stations automatically.
ꢀ Search a track or folder.
8
EN
g DISP
3 Get started
ꢀ Display radio frequency and clock.
ꢀ Display track, elapsed time, artist,
DOEXPꢁꢀWLWOHꢁꢀIROGHUꢁꢀÀOHꢀDQGꢀFORFNꢂꢀ
Caution
h 6
ꢀ Select preset station no. 6.
Use the controls only as stated in this user
manual.
i 5
ꢀ Select preset station no. 5.
Always follow the instructions in this chapter in
sequence.
j SHUF, 4
If you contact Philips, you will be asked for the
model and serial number of your apparatus.The
model number and serial number are on the
bottom of your apparatus.Write the numbers
here:
ꢀ $FWLYDWHꢀRUꢀGHDFWLYDWHꢀVKXIÁHꢀPRGHꢂ
ꢀ Select preset station no. 4.
k 1,
ꢀ Start play.
ꢀ Pause or resume play.
ꢀ Select preset station no. 1.
Model No. __________________________
Serial No. ___________________________
l INTRO, 2
ꢀ Turn intro play on or off.
ꢀ Select preset station no. 2.
Install the car audio
m AUDIO
These instructions are for a typical installation.
However, if your car has different requirements,
make the corresponding adjustment. If you have
any questions regarding installation kits, consult
your Philips car audio dealer.
ꢀ Access audio setting menu.
n Navigation buttons
ꢀ
/
Tune for radio station
Skip/search for MP3/WMA track.
/
ꢀ
Caution
Select tuner band.
Select MP3/WMA folder.
This unit is designed for negative ground
(earth) 12 V DC operation only.
ꢀ SEL
ꢀ&RQÀUPꢀVHOHFWLRQꢂ
Always install this unit in the car dashboard.
Other locations can be dangerous as the rear
of the unit heats up during use.
To avoid short-circuit: before you connect,
o MENU
ꢀ Access system menu.
ensure that the ignition is off.
Ensure that you connect the yellow and red
power supply leads after all other leads are
connected.
p
PWR,
ꢀ Turn the unit on or off.
ꢀ Mute or restore volume.
Ensure that all loose leads are insulated with
electrical tape.
Ensure that the leads do not get caught under
screws orin parts that will move (e.g. seat rail).
Ensure that all ground (earth) leads are run to
a common ground (earth) point.
q
ꢀ Return to previous menu.
ꢀ Disable screen blackout.
Use only the supplied mounting hardware for a
safe and secure installation.
,PSURSHUꢀIXVHVꢀFDQꢀFDXVHꢀGDPDJHꢀRUꢀÀUHꢂꢀ
When you need to change the fuse, consult a
professional.
EN
9
Note on the power supply lead (yellow)
ꢀ When you connect other devices to this
apparatus, ensure that the rating of the
car circuit is higher than the total fuse
value of all the connected devices.
Connection: for cars with ISO
connectors
Caution
Ensure that all loose leads are insulated with
Notes on speaker connection
ꢀ Never connect speaker wires to the
metal body or chassis of the car.
ꢀ Never connect speaker wires with stripes
to one another.
electrical tape.
1 Pull out the ISO connectors from car
dashboard and connect them to the
bigger end of the supplied standard
connector.
Overview of parts
These are the supplied parts needed to
connect and install this unit.
a In-car audio system
b Sleeve
c Front panel
d Trim plate
e Rubber cushion
f Disassembly tools
g Screws (4 pieces)
h ISO connector
2 Connect the other end of the supplied
standard connector to the unit.
a
b
c
e
d
h
3ꢀ &RQQHFWꢀWKHꢀDQWHQQDꢀDQGꢀDPSOLÀHUꢀDVꢀ
illustrated, if applicable. You can connect
WKHꢀFDUꢀDXGLRꢀWRꢀWKHꢀDPSOLÀHUꢀWKURXJKꢀ
RCA-TO-RCA cables (not supplied).
f
g
10 EN
a
a
a
b
b
c
a
d
a
b
b
c
d
c
b
e
c
c
d
f
AMP
g
h
i
d
Connector
Connect to
Antenna
1 ANTENNA
2 Cut off the bigger end of the supplied
standard connector.
2 REAR LINE OUT R Rear right speaker
3 REAR LINE OUT L Rear left speaker
3 Check the car’s wiring carefully and
connect them to the supplied standard
connector.
Connection: for cars without ISO
connectors
1 Green/black strip Left speaker (Rear)
2 White/black strip Left speaker (Front)
Caution
3 Gray/black strip
Right speaker (Front)
Be sure to connect the black ground (earth)
4 Purple/black strip Right speaker (Rear)
OHDGꢀÀUVWꢂ
1ꢀ &RQQHFWꢀWKHꢀDQWHQQDꢀDQGꢀDPSOLÀHUꢀDVꢀ
illustrated, if applicable.
e
f
RED
Ignition key +12V DC
when ON/ACC
BLUE
Motor/electric antenna
UHOD\ꢁFRQWUROꢁOHDGꢂ$PSOLÀHUꢁ
relay control lead
Ground
a
g
h
i
BLACK
ORANGE Illumination switch
YELLOW To the +12V car battery
which is energized at all times
c
AMP
b
4 Connect the supplied standard connector
to the unit.
Connector
Connect to
1 ANTENNA
Antenna
2 REAR LINE OUT R Rear right speaker
3 REAR LINE OUT L Rear left speaker
EN 11
Tip
The pin arrangement for the ISO connectors
depends on the type of vehicle you drive.
Make sure to make the proper connections to
prevent damage to the unit.
4 Ensure that car dashboard opening is
within these measurements:
Mount in the dashboard
5mm
1 If the car does not have an on-board
drive or navigation computer, disconnect
the negative terminal of the car battery.
ꢀ If you disconnect the car battery in
a car that has an on-board drive or
navigation computer, the computer
may lose its memory.
1
83 mm
ꢀ If the car battery is not disconnected,
to avoid short-circuit, ensure that
bare wires do not touch each other.
2 Remove the two screws on the top of the
unit.
53mm
5 Install the sleeve into the dashboard and
EHQGꢀWKHꢀWDEVꢀRXWZDUGꢀWRꢀÀ[ꢀWKHꢀVOHHYHꢂ
Note
6NLSꢀWKLVꢀVWHSꢀLIꢀWKHꢀXQLWꢀLVꢀQRWꢀÀ[HGꢀE\ꢀVOHHYHꢀ
but by supplied screws.
3 Remove the mounting sleeve with the
supplied disassembly tools.
12 EN
5mm
6 Place the supplied rubber cushion over
the end of the mounting bolt.
2 Insert the right side of the panel in the
chassis until it is correctly engaged.
3 Press the left side of the panel and point
the left hole at the left pillar.
4 Release the panel to engage the left side.
Install remote control battery
7 Slide the unit into the dashboard until you
hear a click sound.
Caution
Risk of explosion! Keep batteries away from
KHDWꢁꢀVXQVKLQHꢀRUꢀÀUHꢂꢀ1HYHUꢀGLVFDUGꢀEDWWHULHVꢀ
LQꢀÀUHꢂ
8 Reconnect the negative terminal of the
car battery.
Risk of decreased battery life! Never mix
different brands or types of batteries.
Risk of product damage! When the remote
control is not used for long periods, remove
the batteries.
Perchlorate Material - special handling may
perchlorate.
Attach the front panel
1 Attach the trim plate.
)RUꢁÀUVWꢃWLPHꢁXVHꢄꢁ
1 Remove the protective tab to activate the
remote control battery.
EN 13
To replace the remote control battery:
4 Listen to radio
1 Open the battery compartment.
2 Insert 1 CR2025 batteries with correct
polarity (+/-) as indicated.
Tune to a radio station
3 Close the battery compartment.
1 Press SOURCE repeatedly to select
Tuner.
2 Press or to select band: [FM1],
[FM2], [FM3], [AM1], or [AM2] .
3 Press
or
to tune to a radio station
manually.
» The radio station is broadcast.
ꢀ To search for a radio station
automatically, press
seconds.
or
for 3
Select tuner sensitivity
You can adjust the tuner sensitivity if you want
to receive more radio stations or only stations
with strong signal.
Turn on
1 Press MENU/DISP for over 2 seconds.
1 Press to turn on the unit.
ꢀ To turn off the unit, press for 3
seconds.
2 Press or repeatedly until [LOCAL]
or [DX] is displayed.
3 Rotate to select a setting:
ꢀ [LOCAL] (local): Only stations with
strong signal can be broadcast.
ꢀ [DX] (distance): Stations with strong
and weak signals can be broadcast.
Set clock
1 Press MENU/DISP for 3 seconds.
2 Press or repeatedly until the
currently time is displayed.
Select stereo/mono broadcasting
For stations with weak signals: to improve the
reception, change to monoaural sound.
3 Turn clockwise to set hour.
4 Press ꢀWRꢀFRQÀUPꢂ
5 Turn anti-clockwise to set minute.
6 Press ꢀWRꢀFRQÀUPꢂ
1 Press MENU/DISP for 3 seconds.
2 Press or repeatedly until [STEREO]
or [MONO] is displayed.
3 Turn to select a setting:
ꢀ [STEREO]: stereo broadcast.
ꢀ [MONO]: mono broadcast.
View clock
1 Press MENU/DISP repeatedly until the
clock is displayed.
14 EN
Store radio stations in
memory
5 Play audio files
You can store up to 6 stations in each band.
Note
Ensure that the disc or device contains playable
Store staions automatically
ÀOHVꢂ
1 Press SEARCHꢀÀUVWꢁꢀWKHQꢀSUHVVꢀ .
» The six strongest stations of the
selected band are saved in preset
channel automatically: FM1,FM2,FM3
1-6,AM1,AM2.
Play a disc
Note
Store staions manually
You cannot play CDs encoded with copyright
1 Tune to a station that you want to store.
(see ‘Tune to a radio station’ on page 14)
protection technologies.
You can play commercially available audio CDs
and these discs:
2 Press one of the numbered buttons 1 to
6 for 3 seconds.
ꢀ CD-Recordables (CD-R)
ꢀ CD-Re-writables (CD-RW)
ꢀ MP3 CDs
» The station is saved in the selected
channel.
ꢀ WMA CDs
Note
Tune to a preset station
Ensure that the disc contains playable content.
1 Press or to select band.
2 Press the number button 1 to 6 to select
the preset station.
1 Press on the front panel to release the
panel.
2 Insert a CD with the printed side facing
up.
3 Close the panel.
» Play starts automatically.
ꢀ To pause CD play, press 1
ꢀ To resume CD play, press 1
.
again.
Remove the CD
To take out the CD,
1 Press
.
2 Press beside the disc slot.
Tip
If the disc is blocked in the disc compartment,
press and hold until the disc comes out.
EN 15
Control play
Intro play
ꢀ To select a folder, press or .
<RXꢀFDQꢀSOD\ꢀWKHꢀÀUVWꢀꢄꢅꢀVHFRQGVꢀRIꢀHDFKꢀWUDFNꢂ
ꢀ To skip to the previous/next track, press
1 During play, press INTRO, 2 to select:
ꢀ [INT ON]ꢀꢆꢀ$IWHUꢀWKHꢀÀUVWꢀꢄꢅꢀ
seconds of each track have been
played, play stops.
or
.
ꢀ To search backward/forward rapidly
within the current track, press
for 3 seconds.
or
ꢀ [INT OFF] : Cancel intro play and
start normal play.
ꢀ To pause, press 1,
.
ꢀ To resume play, press 1,
again.
6KXIÁHꢁSOD\
You can play the tracks in random order.
Search for an MP3/WMA
track
1 During play, press SHUF, 4 to select:
ꢀ [SHUF ON]ꢆꢀVWDUWꢀVKXIÁHꢀSOD\ꢀIRUꢀDOOꢀ
tracks.
1 Press SEARCH.
» Search menu is displayed.
ꢀ [SHUF OFF]ꢆꢀFDQFHOꢀVKXIÁHꢀSOD\ꢂ
» [FOLD SCH]: search by folder
sequence.
» [FILE SCH]: search by track name.
Repeat play
2 Turn to select [FILE] and then press
ꢀWRꢀFRQÀUPꢂ
1 During play, press 3, REP repeatedly to
select:
ꢀ [RPT TRK] (repeat one track): play the
current track repeatedly.
ꢀ [RPT DIR] (repeat a folder): play all tracks
in the current folder repeatedly.
ꢀ [RPT ALL] (repeat all tracks): play all
tracks repeatedly.
3 Turn to enter a character and then
press .
4 Repeat step 3 until the search term is
complete.
5 Press for 3 seconds to start search.
» :KHQꢀVHDUFKꢀLVꢀÀQLVKHGꢁꢀDꢀOLVWꢀRIꢀ
matching tracks are displayed.
ꢀ [RPT OFF]: cancel repeat.
6 Turn to skip over the list.
7 Press to select a track.
Connect external sound
source
View play information
1 Connect the external sound source to
MP3 LINK socket with a 3.5 mm cable.
1 During play, press MENU/DISP
repeatedly to view:
2 Press SOURCE repeatedly until [MP3
LINK] is displayed.
ꢀ Track number and elapsed play time
ꢀ Artist
ꢀ Album
ꢀ Title
ꢀ Folder
ꢀ File
3 Operate the external component (refer
to the instructions supplied with the
external component).
ꢀ Clock
16 EN
Select preset equalizer
6 Adjust sound
1 Press EQ/Audio.
» The current Equalizer setting is
displayed.
Adjust volume
2 Press EQ/Audio again repeatedly to
select a preset EQ:
1 Turn clockwise/anticlockwise to
increase/decrease volume.
ꢀ [OPTIMAL] (optimal)
ꢀ [FLAT]ꢀꢇÁDWꢈ
ꢀ [POP] (pop)
ꢀ [USER] (user)
Mute
ꢀ [TECHNO] (techno)
ꢀ [ROCK] (rock)
ꢀ [CLASSIC] (classic)
ꢀ [JAZZ] (jazz)
You can turn off the sound of your audio.
1 During play, press MUTE .
ꢀ To turn the sound back on, press
MUTE again.
Other sound settings
Turn Dynamic Bass Boost
(DBB) on/off
You can also edit user preset EQ.
1 Press EQ/Audio for 3 seconds.
2 Press or repeatedly to select the
item to be adjusted:
1 Press DBB, the current setting is
displayed:
» [DBB ON] :The Dynamic Bass Boost
(DBB) function is on.
ꢀ [BAS] (bass) range: -7 to +7.
ꢀ [TRE] (treble) range: -7 to +7.
ꢀ [BAL] (balance) range: 12L to 12R. (L
= left speaker, R = right speaker)
ꢀ [FAD] (fader) range: 12R to 12F. (R =
rear speaker, F = front speaker)
» [DBB OFF] :The DBB function is off.
2 Press DBB again to change the DBB
setting.
3 Turn to select a value.
EN 17
3 Press or repeatedly to until [A-VOL]
is displayed.
7 Adjust system
settings
4 Turn to select a value: 0 - 47.
Turn beep sound on/off
Turn demo mode on/off
Each time you press a button, the unit beeps.
You can turn off/on this beep sound.
When demo mode is on, when the unit is
idle for more than 2 minutes, all functions are
displayed.
1 Press MENU/DISP for3 seconds.
1 Press MENU/DISP for 3 seconds.
2 Press or repeatedly to until [DEMO]
is displayed.
2 Press or repeatedly to until [BEEP
ON] or [BEEP OFF] is displayed.
3 Rotate to select a setting:
ꢀ [BEEP ON]: Turn on the beep
sound.
» The screen shows current Demo
mode setting.
ꢀ [BEEP OFF]: Turn off the beep
sound.
3 Turn to select a setting:
ꢀ [DEMO ON] : Turn on the demo
mode.
ꢀ [DEMO OFF] : Turn off the demo
mode.
Turn display scroll on/off
For track information that is longer than the
display panel: you can select to cut off the
remainder of the text, or scroll to display the
full text.
Select start volume
Each time you turn on the unit, it can play at the
last listened volume or at the preset volume.
Note
1 Press MENU/DISP for 3 seconds.
2 Press or repeatedly to until [V -
LAST] or [V - ADJ] is displayed.
If any special characters are present in the
MP3 track name or album name, it may not
display correctly on the screen because these
characters are not supported.
Some WMA is protected by Digital Rights
Management (DRM), it cannot be played on
the unit.
3 Turn to select a setting:
ꢀ [V - LAST] : Each time you turn on
the unit, the volume remains from its
previous use.
)ROGHUVꢉÀOHVꢀH[FHHGꢀWKHꢀVXSSRUWHGꢀOLPLWꢀRIꢀWKHꢀ
unit are not displayed or played.
ꢀ [V - ADJ] : Each time you turn on
the unit, the volume is at the preset
level.
1 Press MENU/DISP for 3 seconds.
2 Press or repeatedly to until [ROLL
ON] or [ROLL OFF] is displayed.
Store preset volume
3 Turn to select a setting:
ꢀ [ROLL ON] (scroll on): Auto scroll
during play.
You can turn on the unit at a preset volume.
1 Select [V - ADJ] as the start volume.
2 Press MENU/DISP for 3 seconds.
ꢀ [ROLL OFF] (scroll off): No auto
scroll display.
18 EN
Select shock-protect setting
8 Additional
information
You can select the shock protection setting,
depending on the stability of your car and the
condition of the road.
1 Press MENU/DISP for 3 seconds.
2 Press or repeatedly until [ESP] is
displayed.
Detach the front panel
You can detach the front panel to deter theft.
1 Press to release the panel.
2 Press the left side of the panel rightward.
3 Turn to select a setting:
ꢀ [ESP 10 S]: select this when the road
is smooth and there are few bumps.
ꢀ [ESP 40 S]: select this when the road
is bumpy and unstable.
Reset
You can reset the unit to its default setting.
1 Detach the front panel (see ‘Detach the
front panel’ on page 19).
2 Press the reset button by using a ball-
point pen or a similar tool.
» Preset adjustments such as preset
channels and sound adjustments are
erased.
3 Pull the panel towards you to detach it
from the chassis.
4 Store the panel in the supplied carry case
to protect it from dirt or damage.
EN 19
Replace fuse
Remove the unit
If the fuse is damaged,
You can remove the unit from the dashboard.
1 Check the electric connection.
1 Detach the front panel.
2 Buy a fuse that matches the voltage of the
damaged fuse.
2 Pull out the unit by using the removal
keys.
3 Replace the fuse.
FUSE15A
Note
If the new fuse gets damaged again, there may
be an internal malfunction. Consult your Philips
dealer.
20 EN
9 Product
information
10 Troubleshooting
Caution
Never remove the casing of this apparatus.
Note
To keep the warranty valid, never try to repair
the system yourself.
Product information is subject to change
without prior notice.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/support).When you contact Philips,
ensure that your apparatus is nearby and the
model number and serial number are available.
Power supply
12 V DC (11 V - 16 V),
negative ground
15 A
Fuse
Suitable speaker
impedance
Maximum power
output
4 - 8
No power or no sound.
45 W x 4 channels
22 W x 4 RMS
(4 10% T.H.D.)
Car engine is not on. Turn the car engine
on.
Continuous power
output
Cable is not correctly connected. Check
connections.
Pre-Amp output
voltage
2.0 V
Fuse is burnt. Replace fuse.
Volume is too low. Adjust volume (see
‘Adjust volume’ on page 17).
If the above solutions cannot help, press
the RESET button.
Aux-in level
Dimensions
(W x H x D)
Weight
500 mV
188 x 58 x 206 mm
1.57 kg
Ensure that the track played is of a
compatible format.
Radio
Noise in broadcasts.
Frequency range - FM 87.5 - 108.0 MHz
(100 kHz per step
in auto search and
Signals are too weak. Select other
stations with stronger signals.
Check the connection of the car antenna.
Change broadcast from Stereo to mono.
50 kHz per step in
manual search)
Cannot play disc
Frequency range
- AM(MW)
522 - 1620 KHz
(9 KHz)
Ensure that the disc label is inserted with
the printed side facing up.
:LSHꢀWKHꢀGLVFꢀZLWKꢀÀEUHꢀFOHDQLQJꢀFORWKꢀ
from the centre to the edge in a straight
line.
530 - 1710 KHz
(10 KHz)
Usable sensitivity
- FM
8 μV
This disc may be defective. Play another
disc.
Usable sensitivity
- AM(MW)
(S/N = 20 dB)
30 μV
(QVXUHꢀWKDWꢀWKHꢀ&'ꢀLVꢀDꢀÀQDOLVHGꢀ&'ꢉ&'ꢊ
R/CD-RW.
Ensure that the CD is not encoded with
copyright protection technologies.
EN 21
The CD skips tracks
11 Glossary
Ensure that the CD is not damaged or
dirty.
Ensure that random mode is deactivated.
M
Disc cannot be ejected
Press and hold .
MP3
$ꢀÀOHꢀIRUPDWꢀZLWKꢀDꢀVRXQGꢀGDWDꢀFRPSUHVVLRQꢀ
system. MP3 is the abbreviation of Motion
Picture Experts Group 1 (or MPEG-1) Audio
Layer 3. With the MP3 format, one CD-R or
CD-RW can contain about 10 times more
data than a regular CD.
Preset stations lost.
Battery cable is not correctly connected.
Connect the battery cable to the terminal
that is always live.
W
WMA (Windows Media Audio)
An audio format owned by Microsoft, is a
part of Microsoft Windows Media technology.
Includes Microsoft Digital Rights Management
tools, Windows Media Video encoding
technology, and Windows Media Audio
encoding technology.
22 EN
23
24
25
© 2009 Koninklijke Philips Electronics N.V.
All rights reserved.
CED200_55_UM_V1.1
|