PLDVD65IN
OWNER'S MANUAL
Mobile Video System
Vertical Adjustable And Horizontal Rotatable Panel
6.5 Inch Color TFT Monitor
DVD/CD/MP3
Multi-subtitle Languages Function
Multi-audio Languages Function
Multi-angle Function
Parental Control
Remote Control
Protect the Disc Mechanism
Avoid inserting any foreign objects into
the slot of this player.
Failure to observe this may cause
malfunction due to the precise
mechanism of this unit.
FEATURES
Compatible with NTSC DVD
(Video CD)
This player can play discs recorded in
either NTSC format.
Use Authorized Service Centres
Do not attempt to disassemble or adjust
this precision product. Please refer to
the Service Centre list included with this
product for service assistance.
A single LSI chip now integrates all
major DVD playback circuit functions
including MPEG2 decoder, video D/A
converter, and audio decoders.
L/R stereo analog audio outputs for
connection to existing head unit aux
inputs. Video output is composite
video.
For Installation
The unit should be installed in a
horizontal position with the front end up
at a convenient angle, but not more than
30 .
Supplied remote handles multi-function
software (multi-language audio-
track/subtitle, multi-angle, multi-
story, etc.), plus all basic functions.
Protect the monitor mechanical
The monitor is operated automatically.
Do not draw the monitor out or turn it
upward or downward manually.
Otherwise, the mechanism
construction may be harmed to some
degree.
USE THIS PRODUCT SAFELY
This set has been designed and
manufactured to assure personal safety.
Improper use can result in electric shock
or fire hazard. The safeguards
incorporated in this unit protect you if
you observe the following procedures for
installation, use and servicing. This unit
doesn't contain any parts that can be
repaired by the user.
When you operate the monitor with the
remote handset, do not touch the
monitor by your hands. It may harm
your fingers.
When Driving
Keep the volume level low enough to be
aware of road and traffic conditions.
When Car Washing
Do not expose the product to water or
excessive moisture. This could cause
electrical shorts, fire or other damage.
When Parked
Parking in direct sunlight can produce
very high temperatures inside your
vehicle. Give the interior a chance to
cool down before starting playback.
Use the Proper Power Supply
This product is designed to operate with
a 12 volt DC, negative ground battery
system (the regular system in a North
American car).
3
SAFETY INFORMATION
CAUTION:
REGION MANAGEMENT
INFORMATION
MOBILE DVD PLAYER ISA CLASS I
LASER PRODUCT. HOWEVERTHIS
MOBILE DVD PLAYER USESA
VISIBLE/INVISIBLE LASER BEAM
WHICH COULD CAUSE HAZARDOUS
RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE THE MOBILE
DVD PLAYER CORRECTLY AS
INSTRUCTED.
Region Management Information:
This Mobile DVD Player is designed and
manufactured to respond to the Region
Management Information that is recorded
on a DVD disc. If the Region number
described on the DVD disc does not
correspond to the Region number of this
Mobile DVD Player, this Mobile DVD
Player cannot play this disc.
USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPENCOVERSAND - DO NOT
REPAIR YOURSEL.F. REFER SERVICING
TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRICSHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR
MOISTURE.
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE ONLY THE
RECOMMENDED ACCESSORIES.
THIS DEVICE IS INTENDED FOR
CONTINUOUS OPERATION.
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners. Use of this copyright
protection technology must be authorized
by Macrovision Corporation, and is
intended for home and other limited
viewing uses only unless otherwise
authorized by Macrovision Corporation.
Reverse engineering or disassembly is
prohibited.
4
DISC NOTES
Disc formats supported by this player
unusable) depending on your handle it
and conditions in the usage environment.
Note these scratches are not an
DVD
12 cm disc
(Single-sided disc only)
indication of any problem with the player.
Label side up
VIDEO CD
12 cm disc
CD
12 cm disc
Do not touch
the underside
of the disc
MP3
12 cm disc
Discs which cannot be played with this
player
Do not bend
DVD-ROM
DVD-R/DVD-RAM
CDV
CD-G
Handling and Cleaning
Dirt, dust, scratches and warping disc
will cause misoperation.
Do not place stickers or make
scratches on discs.
Wipe the disc from center
toward the outside edge
Preparing New Discs with Rough Spots
A new disc may have rough edges on its
inside and outside edges. If a disc with
rough edges is used, the proper setting
will not be performed and the player will
not play the disc. Therefore, remove the
rough edges in advance by using a ball
point pen or pencil as shown on the right.
To remove the rough edges, press the
side of the pen or pencil against the
inside and outside edges of the disc.
Do not warp discs.
A disc should always be kept in its
case when not in use to prevent from
damaging.
Do not place discs in the following
places:
1. Direct sunlight
2. Dirty, dusty and damp areas
3. Near car heaters
4. On the seats or dashboard
Rough spots on
outside edge
Disc Cleaning
Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, use a soft cloth
slightly moistured with isopropyl (rubbing)
alcohol. Never use solvents such as
benzine, thinner or conventional record
cleaners as they may mar the surface of
the disc.
Ball point pen
or pencil
Note:
A disc may become somewhat scratched
(although not enough to make it
Rough spots
on inside edge
5
INSTALLATION
Notes:
DIN FRONT-MOUNT (Method A)
Choose the mounting location where
the unit will not interfere with the
normal driving function of the driver.
Installation Opening
This unit can be installed in any dashboard
having an opening as show below:
Before finally installing the unit,
connect the wiring temporarily and
make sure it is all connected up
properly and the unit and the system
work properly.
53 mm
182 mm
Use only the parts included with the
unit to ensure proper installation.
The use of unauthorized parts can
cause malfunctions.
Installing the unit
Be sure you test all connections first, and
then follow these steps to install the unit.
1. Make sure the ignition is turned off,
and then disconnect the cable from
the vehicle battery's negative (-)
terminal.
2. Disconnect the wire harness and the
antenna.
3. Lift the top of the outer trim ring then
pull it out to remove it.
4. The two supplied keys release tabs
inside the unit's sleeve so you can
remove it. Insert thekeys as far as they
will go (with the notches facing up) into
the appropriate slots at the middle left
and right sides of the unit. Then slide
the sleeve off the back of the unit.
Consult with your nearest dealer if
installation requires the drilling of holes
or other modifications of the vehicle.
Install the unit where it does not get in
the driver's way and cannot injure the
passenger if there is a sudden stop,
like an emergency stop.
If installation angle exceeds 30 from
horizontal, the unit might not give its
optimum performance.
30
Sleeve
L Key
Outer Trim Ring
Avoid installing the unit where it would
be subject to high temperature, such
as from direct sunlight, or from hot air,
from the heater, or where it would be
subject to dust, dirt or excessive
vibration.
R Key
DIN FRONT/REAR-MOUNT
This unit can be properly installed either
from "Front" (conventional DIN Front-
mount) or "Rear" (DIN Rear-mount
installation, utilizing threaded screw holes
at the sides of the unit chassis).
5. Mount the sleeveby inserting the sleeve
into the opening of the dashboard and
bend open the tabs located around the
sleeve with a screwdriver. Not all tabs
will be able to make contact, so
For details, refer to the following
illustrated installation methods.
examine which ones will be most
effective. Bending open the appropriate
tabs behind the dashboard to secure
the sleeve in place.
6
INSTALLATION
Dashboard
Removing the unit
1. Make sure the ignition is turned off,
and then disconnect the cable from
the vehicle battery's negative (-)
terminal.
Tabs
2. Remove the metal strap attached the
back of the unit (if attached).
3. Lift the top of the outer trim ring then
pull it out to remove it.
Screwdriver
4. Insert both of the supplied keys into
the slots at the middle left and right
sides of the unit, then pull the unit out
of the dashboard.
Sleeve
6. Reconnect the wire harness and the
antenna and be careful not to pinch
any wires or cables.
7. Slide the unit into the sleeve until it
locks into place.
8. To further secure the unit, use the
supplied metal strap to securethe back
of the unit in place. Use the supplied
hardware(HexNut (M5mm)and Spring
Washer)to attach one end of the strap
to the mounting bolt on the back of
the unit. If necessary, bend the metal
strap to fit your vehicle's mounting
area. Then use the supplied hardware
(Tapping Screw (5x25mm) and Plain
Washer) to attach the other end of
metal strap to a solid metal part of the
vehicleunder the dashboard. Thisstrap
also helps ensure proper electrical
grounding of the unit.
Spring Washer
Hex Nut
Metal Strap
Mounting Bolt
Plain Washer
Tapping Screw
9. Reconnect the cable to the vehicle
battery's negative (-) terminal. Then
replace the outer trim ring.
7
INSTALLATION
DIN FRONT-MOUNT (Method B)
3
1
1. Factory radio mounting bracket
2. Car radio mounting bracket
3. Screw
2
4. After aligning the car radio mounting
bracket with the factory radio mounting
bracket, tighten the screws (5x5mm)
at 2 places on each side.
5. When fix factory radio mounting bracket
with the screws, use a standard-tipped
screwdriver to bend open the tabs of the
car radio mounting bracket to make them
fit into the holes in the factory radio
mounting bracket.
4
5
8
THE PLAYER
FRONT VIEW
6
2
1
3
4
5
When the monitor stretching out:
11
8
9
7
10
1. POWER
7. PICTURE
8. VOLUME -
9. VOLUME +
2. Remote sensor (on the front
panel)
3. OPEN/CLOSE
10. Remote sensor (on the monitor
panel)
4.
(EJECT)
11. 6.5 INCH COLOR
TFT MONITOR
5. Disc Slot
6. Reset Button
9
THE PLAYER
BACK VIEW
12
13 14
15
16
17
18
12. AUDIO/VIDEO INPUT 1
13. RGB SYSTEM
16. DIGITAL AUDIO
17. AUDIO/ VIDEO OUTPUT
18. DC 12V IN
14. REMOTE SOCKET
15. AUDIO/ VIDEO INPUT 2
10
ELECTRICAL CONNECTION
AUDIO/VIDEO
INPUT
1
DC 12V IN
AUDIO/VIDEO
OUTPUT
AUDIO/VIDEO
INPUT
DIGITAL
AUDIO
REMOTE
2
RGB SYSTEM
11
REMOTE CONTROL
LOCATION AND FUNCTION OF KEYS
8
9
5
4
1
3
7
2
6
10
11
14
12
13
15
19
18
21
16
17
20
24
22
23
28
27
25
26
29
30
32
31
12
REMOTE CONTROL
1.
POWER
Press POWER to turn the unit ON or OFF.
Press to eject the disc.
2. EJECT
3. OPEN/CLOSE Press to open/close the monitor .
4. SUBTITLE
Changing of the SUBTITLE language on multi-subtitle
language DVD disc.
5. ANGLE
Changing of the view angle on multi-angle DVD disc.
Display statistical disc information during playback.
Changing between DVD, AV1,AV2, and RGB mode
Display the SETUP menu.
6. DISPLAY
7. MODE
8. SETUP
9. PAL/NTSC
Switch between PAL mode and NTSC mode.
10. AUDIO
Changing of the AUDIO soundtrack on multi-audio soundtrack
DVD disc. Changing of the sound mode of the VCD/CD disc.
11. TITLE
12. MENU
Display the TITLE menu that is stored in DVD disc.
Display the root menu that is stored on the DVD disc.
13.
/
,
/
In case of MENU mode,
/
buttons to select item left/right, ahead/back.
,
/
, buttons served as cursor
14. ENTER
Confirm the Track/Chapter selected with the numeric buttons or
selected with the cursor buttons on TV screen.
15.
16.
17.
18.
/
Changing for slow forward/ reverse playback motion
Press to play the disc.
/
Press
to search forward rapidly & to search reverse rapidly.
to skip to the next track & press to skip back one
/
Press
track.
19.
20.
Press it to stop playback.
Press it to pause playback.
Numeric buttons
21. 0 - 9
22. 10+
Increments number by (10,20,30,...etc), cooperatively used with
numeric buttons.
23. CLEAR
24. VOLUME+/-
When you input a number in error, press the button to clear it.
Press VOLUME+/- button to increase or decrease the volume
level.
25. ZOOM
26. PANEL+
27. GOTO
28. PBC
29. PROGRAM
30. PANEL-
31. REPEAT
32. A-B
Allows the picture to be increased in size.
Press to turn the monitor upward at fine steps.
Disc search button, cooperatively used with numeric buttons.
Changing between PBC ON and PBC OFF on the VCD disc.
Allows the track played in the order you programmed.
Press to turn the monitor downward at fine steps.
Switch the Repeat mode of discs.
A-B repeat allows a passage to be repeated continuously.
13
REMOTE CONTROL
Preparing the Remote Control
Inserting the Batteries
1. Open the battery compartment cover.
2. Insert the new batteries. Make sure
that the positive and negative
terminals of the batteries are oriented
as indicated.
3. Close the cover
Battery: Two AAA size battery.
Using the Remote Control
Point the remote control towards the
remote control signal receiver on the
player front face.
Operation angle: About 30 degree in
each the direction of the front of the
remote sensor.
14
LOADING/EJECTING A DISC
Loading a Disc
1. Turn the ignition on the accessory
position.
2. Press the POWER button (1).
3. Insert the disc with printed side facing
up into the disc slot (2).
4. The player starts playback
automatically.
1
3
2
Ejecting a Disc
Press (EJECT) button (3) to eject the
disc.
15
OPERATION
Don't rotate the monitor forcibly to
avoid mechanical damage.
BASIC OPERATION
Turnig the player on/off
Press the POWER button on the front
panel or (POWER) button on the
remote control to turn the player on or
off.
Open/Close the Monitor and Angle
Adjustment
Press OPEN/CLOSE button on the
front panel or point the remote control
to the remote sensor on the front panel
and press OPEN/CLOSE button on the
remote control, the monitor will stretch
automatically .
Fig.3
Return the monitor to the central
viewing position, then press
OPEN/CLOSE button on the front
panel or press OPEN/CLOSE button
on the remote control, the monitor will
turn downward automatically.
OPEN/CLOSE button
Fig.1
When the monitor stretches to a
certain location, it will turn upward
automatically and stop at vertical
position.
Fig.4
When the monitor turns downward to
a certain angle, it will draw in.
Fig.2
Adjusting the viewing angle.
When the monitor doesn't move, you
+
can press PANEL or PANEL- button
on the remote control to turn the
monitor upward or downward at fine
steps to get a desired viewing angle.
And you can rotate the monitor left and
right from the central viewing position
at a certain angle range manually.
Fig.5
16
OPERATION
Remote Sensor
a ballpoint pen or thin metal object. The
reset button is to be activated for the
following reasons:
- Initial installation of the unit when all
wiring is completed.
There is a remote sensor on the front
panel. On the monitor, there is another
remote sensor to receive remote control
signal. You can point the remote control
handset to the remote sensor on the front - All the function buttons do not
panel (when the monitor doesn't stretch
out) or the remote sensor on the monitor
panel (when the monitor stretches out)
and press function keys on the remote
control to control the DVD unit.
The unit is also connected to an external
remote receiver (See the electrical
connection diagram above), and the
function is the same with the remote
sensor on the front panel or on the
monitor panel.
operate.
- Error symbol on the display.
Picture mode Adjustment
Press PICTURE button on the monitor
panel, the picture mode will show on
the display, repeatedly press PICTURE
button to select among BRIGHT,
CONTRAST, COLOR, TINT (For the unit
with NTSC system) and SCREEN.
(For the unit with NTSC system):
PICTURE
Notes:
The external remote receiver is placed
near the monitor for the best to
receiver remote signal easily.
If the angle of the monitor from vertical
BRIGHT
CONTRAST
COLOR
TINT
32
32
32
32
exceeds
(Especially the distance
30
exceeds 3m.), controlling the DVD unit
through the remote sensor on the front
panel cannot get good effect. You are
suggested to use the external re.mote
receiver
SCREEN
16:9
6.5 Inch TFT Display
When the monitor stretches out, the 6.5
inch color TFT display can show the
current state of the unit.
Press VOLUME+/- buttons on the
monitor panel or VOLUME+/- buttons
on the remote control to adjust the
selected item. The corresponding value
will show on the display.
Volume Level Adjustment
Press VOLUME+/- on the monitor panel
of the unit or VOLUME +/- on the remote
control to increase or decrease the
volume level.
Mode Selection
press MODE button on the remote
control to select among DVD, AV1,
AV2 and RGB mode.
Reset
Reset button is placed on the front
panel and must be activated with either
17
OPERATION
DISC (DVD, VCD, CD, MP3)
OPERATION
Pause (still picture)
Pressing on the remote control during
playback will stop play temporary . To
return to normal playback, press on
the remote control .
Switching to DVD mode
press MODE button on remote to select
DVD mode.
Repeat Function
Stopping Play
FOR DVD:
Press the REPEATbutton to select
repeat mode as follow.
- Briefly press the (Stop) button to
stop the unit playback, when the
(Play) button is pressed, normal
playback will continue.
- Press (Stop) button twice to stop
the playback and go back to initial
Track/Chapter.
CHAPTERREPEATON TITLE REPEATON
REPEATOFF
FOR VCD/CD:
Press the REPEAT button to select
repeat mode as follow.
Rapid Forward/Rapid Reverse
Press
&
during play. Each time the
REP-ONE
REP-ALL REPEAT OFF
button is pressed, the speed of rapid
forward/reverse changes according to
the disc as follow.
1. Continuously repeat at the current
chapter/track, when selected REP-
ONE mode.
DVD:
Normal Playback
2X
4X
6X
8X
2. Select REP-ALLmode to continuously
repeat all chapter/track on the current
disc.
VCD/CD:
Normal Playback
1X
2X
3X
4X
3. When the player finishes playback of
the current disc last chapter/track, it
will stop and display the elapsed time.
When REPEAT OFF mode is
selected, REP-ONE & REP-ALL
disappears from screen display.
4. REPEAT feature does not support
VCD2.0 (with PBC ON).
MP3:
Normal Playback
2X
4X
Skipping Track
/
control during playback.
Press
button on the remote
A-B
Press to skip to next track, and
back one track.
Note: For some VCD2.0 discs (PBC-
playback control),
be unavailable.
to
A-B repeat allows a passage to be
repeated continuously. Press A-B button
at the start of the required passage, then
press A-B button again at the end of the
passage. To revert to normal playing,
press A-B button again. Each time the
button is pressed, the screen will display
as follows:
/
buttons may
Slow Motion Play
Press
/
during play.
Each time the button is pressed, the speed of
slow forward/reverse changes according to
the disc as follow.
A TO B SETA
A TO B SETB
A TO B CANCELLED
DVD:
Normal Playback
2X
4X
8X
18
OPERATION
same as described above. If you want to
complete program setting, press (Stop)
Disc Search (GOTO)
button first then press
button to play
FOR DVD
Press GOTO button twice, the screen will
display the following message:
tracks in programmed order. In stop mode
press PROGRAM button to exit program
mode and "PROGRAM OFF" appears.
If you set WITH MENU in SMART NAV
item in PREFERENCES PAGE, you can
TITLE 01/01 TIME -- : -- : --
00:00:25
use
/
,
/
buttons to select
PROGRAM PXXX mode or track number
and press ENTER button to confirm it.
You can select the item you want to
watch through TIME setting by using
numeric buttons and ENTER key.
FOR CD/VCD (WITH PBC OFF):
Press GOTO button once, the screen will
display the following message:
On-Screen Display Function
Press the DISPLAY button during
playback to display the contents of the
current disc on the screen.
Example:
GOTO -- : --
00:00:25
DVD:
(1) Press DISPLAY for the first time:
TITLE01/03 CHAPTER002/025
00:02:25
Use numeric buttons to input the time
directly.
Zoom
Allows the picture to be increased in size.
Press ZOOM to toggle among 1.5 scale,
2.0 scale and 3.0 scale.
Title Number, Total Title Number, Chapter
Number, Total Chapter Number of this
Title of the disc currently being played
will be shown on the screen, along with
the elapsed time.
During Zoom mode, press / ,
/
buttons to move pictures up, down, left or
right direction.
(2) Press DISPLAY for the second time:
Program
TITLE REMAIN
01:46:58
For CD/VCD (WITH PBC OFF)/DVD
(WITH PBC OFF):
In stop mode, press PROGRAM button,
the screen will display "PROGRAM
P00:00" For example: press numeric
button 4 "PROGRAM P01:04" appears,
it means track 4 will be played first, then
press numeric button 6 and "PROGRAM
P02:06" appears. Press the different
numeric button to select the corresponding
track, and then you can program tracks to
your need. If you want to complete
(3) Press DISPLAY for the third time:
CHAPTER ELAPSED
00:00:24
(4) Press DISPLAY for the fourth time:
program setting, press button or ENTER
button to play tracks in programmed order.
CHAPTER REMAIN
00:01:39
For MP3:
In stop mode, press PROGRAM button,
the screen will display "PROGRAM
P00:0000" and the program method is the
19
OPERATION
SINGLE REMAIN
00:03:15
(5) Press DISPLAY for the fifth time:
The message on the screen will be cleared.
VCD:
TOTALTRACK : 14
TRACK : - 01
(1) Press DISPLAY for the first time:
SINGLE ELAPSED
00:00:25
(3) Press DISPLAY for the third time:
TOTAL ELASPED
00:00:25
(2) Press DISPLAY for the second time:
TOTAL TRACK : 14
TRACK : - 01
SINGLE REMAIN
00:03:15
(4) Press DISPLAY for the fourth time:
TOTAL REMAIN
00:40:35
(3) PressDISPLAY for the third time:
TOTAL TRACK : 14
TRACK : - 01
TOTAL ELAPSED
00:00:25
(5) Press DISPLAY for the fifth time:
The message on the screen will be cleared.
MP3 (When set to NO MENU in SMART
NAV item):
(4) Press DISPLAY for the fourth time:
TOTAL REMAIN
00:40:35
(1) Press DISPLAY for the first time:
CHAPTER ELASPED 00:00:25
(5) Press DISPLAY for the fifth time:
The message on the screen will be cleared.
TOTALTRACK : 123
TRACK : - 01
CD:
(2) Press DISPLAY for the second time:
(1) Press DISPLAY for the first time:
CHAPTER REMAIN 00:04:25
SINGLE ELASPED
00:00:25
TOTALTRACK : 123
TRACK : - 01
TOTALTRACK : 14
TRACK : - 01
(3) Press DISPLAY for the third time:
The message on the screen will be cleared.
(2) Press DISPLAY for the second time:
Press the DISPLAY button during DVD,
AV1,mode or AV2 mode, "DVD", "AV1"
or "AV2" will appear on the screen display
for about five seconds.
20
OPERATION
-
-
Some discs only contain one subtitle
language.
When no different subtitle language
Multi-audio Language Function
For DVD:
Press AUDIO on the remote control
during playback. Each time the button
is pressed, the audio soundtrack
language changes on sequential order.
Notes:
- The language number is different
according to the disc.
- Some disc only contain one language
soundtrack.
- When no different language
are recorded,
screen left top corner.
will be displayed at
Multi-angle Function(ForDVD only)
Press ANGLE during playback.
Each time the button is pressed, the
angle changes in sequential order
Notes:
-
The angle number is different
according to the disc.
soundtrack are recorded, will be
displayed at screen left top corner.
-
The function only works for discs
having scenes recorded at different
angles.
For VCD/CD:
-
When no different angle are recorded,
Press AUDIO during playback.
It is possible to switch the sound
between monaural and stereo sound.
MONO LEFT MONO RIGHT STEREO
will be displayed at screen left top
corner.
MENU Function (For DVD Only)
Press MENU button while the disc is
playing and the disc root menu will be
displayed. You can navigate with the
remote control navigation keys and
select a feature with the ENTER key.
TITLE Menu Function (For DVD only)
If the DVDhas multiple titles recorded on
the disc. It can select preferred title from
the title menu to start playback.
- Press TITLE during playback.
The title menu is display.
- Press the cursor button shown in
screen diplay, select preferred title by
the cursor button and confirm by
ENTER key.
Multi-subtitle Language Function
(For DVD only)
Press SUB-TITLE during playback.
Each time the button is pressed, the
subtitle language changes in sequential
order.
Notes:
-
The language number is different
according to the disc.
21
OPERATION
RGB OPERATION
Switching to RGB mode
Smart navigation MP3 Disc Play
MP3 disc is playing as the format of
FOLDER.
When you connect the RGB terminals
on the back of the DVD unit to the
corresponding RGB system, then Press
MODE button on remote control to
select RGB mode, the RGB signal will
appear on the screen.
For example:
SMART NAVI
ROOT
CD01
CD02
CD03
CD04
CD05
MP3 001 PLUMT
MP3 002 RZID
MP3 003 ASCIS
MP3 004 DCYI
MP3 005 BFZ
Note: When you press MODE button to
select RGB mode and there hasn't any
RGB signal input, then there is nothing
to display on the screen.
DISC
PLAY MODE
/
,
/
In stop mode, Use
on the
remote control to select the item or folder
(such as CD01, CD02...) and press
ENTER button on the remote control to
confirm, then select the desired track
(such as 001 PLUMT, 002 RZID...) on the
current folder to play. Pressing REPEAT
button repeatedly can select three kinds
of repeat play modes.
REP-ONE:
Play the same song over and over again.
FOLDER REP:
Play all songs in the current directory in
sequence, over and over again.
FOLDER:
Play all songs in the current directory
once.
When select PLAY MODE, press
/
to change between the following mode:
SINGLE REP-ONE FOLDER FOLDERREP
DISC SCAN DISC DISC REP RANDOM
SHUFFLE ON PROGRAM PXXX
During playback,use
item ahead or back.
: Rapid reverse,
or
to skip an
: Rapid advance
Note: The FOLDER cannot be selected
during playing. It can be selected after
(Stop) button pressed.
22
SETUP
INITIAL SETUP
GENERAL SETUP
SETUP MENU --- MAIN PAGE
--- GENERAL PAGE ---
GENERAL SETUP
SPEAKER SETUP
AUDIO SETUP
TV DISPLAY
PIC MODE
NORMAL / PS
NORMAL / LB
WIDE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
PREFERENCES
EXIT SETUP
1.Press SETUP on the remote control in
the STOP mode. (Press the
MAIN PAGE
button
twice to ensure that the player is in
STOP mode.)
TV Screen
4:3
Wide (16:9)
Video Material
2.The initial SETUP menu is displayed.
Normal
Pan Scan
Letter-box
4:3
3.Select the preferred item by using the
/
16:9
buttons.
4.Press ENTER button.
a. GENERAL SETUP
TV display setup
This setup page includes all the
item of TV display & Audio output
feature. For details please refer to
GENERAL SETUP MENU.
This is to select the appropriate TV
aspect ratio (4:3 or 16:9) according to
the connected TV set.
Normal/PS (For 4:3 TV)
b. SPEAKER SETUP
Played back in the PAN & SCAN style.
(If connected to wide-screen TV, the left
and right edges are cut off.)
This is to activate the audio output
from DOLBY AC3 5.1 DOWNMIX
to 2 channel mode. Please refer to
SPEAKER SETUP MENU.
Normal/LB (For 4:3 TV)
Played back in letterbox style.
(If connected to wide-screen TV, black
bands appear at top and bottom of the
screen.)
c. AUDIO SETUP
This setup page includes all the
items for AUDIO. Please refer to
AUDIO SETUP MENU.
Wide (For 16:9 TV)
Select when a wide-screen TV set is
connected.
d. PREFERENCES SETUP
This setup page includes all the
configuration of support feature
For details please refer to
PREFERENCES SETUP MENU.
23
SETUP
--- GENERAL PAGE ---
TV DISPLAY
--- GENERAL PAGE ---
TV DISPLAY
PIC MODE
AUTO
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
HI-RES
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
N-FLICKER
ENGLISH
FRENCH
GERMAN
SPANISH
MAIN PAGE
MAIN PAGE
PIC mode setup
Select AUTO, the player PIC mode will
depend on DVD disc.
Select HI-RES format for best image
resolution.
OSD LANG type setup
Select the preferred OSD (On Screen
Display) language by using the
buttons.
/
Select N-FLICKER format on image or
picture with noise or distortion.
--- GENERAL PAGE ---
TV DISPLAY
PIC MODE
--- GENERAL PAGE ---
TV DISPLAY
PIC MODE
ANGLE MARK
OSD LANG
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
ON
CAPTIONS
ON
OFF
SCR SAVER
OFF
MAIN PAGE
MAIN PAGE
CAPTIONS setup
When play DVD disc, activate the
CAPTIONS feature by selecting ON and
the captions (such as the actor dialogue)
appear on the screen; deactivate this
feature by selecting OFF and the captions
will not appear.
ANGLE MARK display setup
If it is set to ON, when the multi-angle
DVDdisc is playing," " (the angle mark)
will appear on the screen; if is set to
"OFF" the mark will not appear.
24
SETUP
--- GENERAL PAGE ---
TY DISPLAY
AUDIO SETUP
--- AUDIO SETUP ---
AUDIO OUT
OP MODE
ANALOG
PIC MODE
SPDIF/RAW
SPDIF/PCM
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
DYNAMIC
LPCM OUTPUT
ON
OFF
MAIN PAGE
MAIN PAGE
AUDIO OUT
- Select ANALOG mode to activate
analog audio output.
- Select SPDIF/RAW mode to activate
raw digital audio output. And the digital
audio format depends on the disc
record format.
SCR SAVER setup
Select the SCR SAVER ON/OFF.
SPEAKER SETUP
- Select SPDIF/PCM mode to activate
PCM digital audio output.
--- SPEAKER SETUP PAGE ---
DOWNMIX
LT/RT
--- AUDIO SETUP ---
STEREO
AUDIO OUT
MAIN PAGE
OP MODE
DYNAMIC
LPCM
LINE OUT
RF REMOD
MAIN PAGE
This is to activate the audio output from
DOLBY AC3 5.1 DOWNMIXto 2 channel
mode. Select the preferred SPEAKER
connection by using the cursor buttons.
Select the LT/RT to activate the Dolby
surround compatible output.
OP MODE
- LINE OUT: Line out mode, with digital
dialog normalization.
- RF REMOD: RF remodulation mode,
with heavy compression and digital
dialog normalization.
Select the STEREO to activate simple
stereo mode.
It is recommended to select LINE OUT
mode.
25
SETUP
--- AUDIO SETUP ---
PREFERENCES SETUP
--- PREFERENCES PAGE ---
AUDIO OUT
TV TYPE
AUTO
NTSC
PAL
FULL
6/8
OP MODE
AUDIO
DYNAMIC
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
4/8
LPCM OUTPUT
2/8
OFF
MAIN PAGE
Dynamic Range Control
Select DYNAMIC and adjust the dynamic
range of a Dobly Digital encoded
program. There are 8 steps between full
compression and off compression.
TV type setup
This player can play discs recorded in
either NTSC format.
Select NTSC format, when the unit is
connected to NTSC TV.
--- AUDIO SETUP ---
Select AUTOformat, the player TVoutput
format will be according to the DVD disc
format.
AUDIO OUT
OP MODE
DYNAMIC
--- PREFERENCES PAGE ---
TV TYPE
LPCM OUTPUT
LPCM 48K
LPCM 96K
AUDIO
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
GERMAN
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
MAIN PAGE
LPCM OUTPUT
Select the LPCM (Line Pause Code
Modulation) OUTPUT between LPCM
48K and LPCM 96K. The higher the
sampling frequency is, the better the
output audio quality is.
AUDIO language setup
Select the preferred AUDIO soundtrack
by using the cursor buttons.
It is recommended to select LPCM 96K
26
SETUP
--- PREFERENCES PAGE ---
--- PREFERENCES PAGE ---
TV TYPE
TV TYPE
1 G
AUDIO
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
GERMAN
OFF
AUDIO
2
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
3 PG
4 PG 13
5
6 PG-R
7 NC-17
8 ADULT
NO_ PARENTAL
SUBTITLE language setup
Select the preferred SUBTITLElanguage
by using the cursor buttons.
PARENTAL
Select suitable parental guidance by the
cursor buttons and confirm by pressing
ENTER button.
--- PREFERENCES PAGE ---
--- PREFERENCES PAGE ---
TV TYPE
AUDIO
TV TYPE
AUDIO
SUBTITLE
SUBTITLE
DISC MENU
PARENTAL
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
GERMAN
PASSWORD
DEFAULTS
CHANGE
SMART NAV
MAIN PAGE
DISC MENU language setup
Select the preferred DISC MENU
language by using the cursor buttons.
PASSWORD
Select CHANGE and press ENTER
button. Type the old password (Theinitial
factory code is 3308) and key in 4
characters password now you want to
use, and retype again to confirm key in
correctly.
27
SETUP
--- PREFERENCES PAGE ---
--- PREFERENCES PAGE ---
TV TYPE
TV TYPE
AUDIO
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
RESET
DEFAULTS
SMART NAV
MAIN PAGE
NO MENU
WITH MENU
DEFAULTS
Select reset to revert to factory initial
settings.
SMART NAV
If select WITH MENU mode, when play a
MP3 disc, the smart navigation menu will
appear on the screen, then the user can
select a track to play according to the
menu hint.
If select NO MENU mode, when play a
MP3 disc, there is no menu to display
and it starts to play directly.
The user can adjust this item according
to one's need.
28
SETUP
DEFAULTS TABLE
General Setup
TV Display
PIC Mode
Angle Mark
OSD Language
Captions
Normal/LB
AUTO
ON
English
ON
SCR Saver
Downmix
Audio Out
OP Mode
Dynamic
ON
Speaker Setup
Audio Setup
Stereo
SPDIF/RAW
Line Out
FULL
LPCM Output
TV Type
LPCM 96K
AUTO
Preferences
Audio
English
English
English
NO_Parental
3308
Subtitle
DISC Menu
Parental
Password
Smart NAV
With Menu
29
TROUBLE SHOOTING
If it appears that your DVD unit is faulty,
first consult this checklist. It may be that
something simple has been overlooked.
NO COLOR IN PICTURE
The disc format is not according to the
TV-set used (NTSC).
DISC DOES NOT PLAY
Ensure the disc label is upwards.
Clean the disc.
Check if the disc is defective by trying
another disc.
Under no circumstances should you
try to repair the player yourself,as this
will invalidate the warranty. Only
qualified service personnel can
remove the cover or service this
player.
NO SOUND
Check audio connections.
If using a HIFI amplifier, try another
sound source.
Check if the volume is minimum, and
adjust the VOLUME+ to increase the
volume level.
NO POWER
Check if the on/off button on the front
of the player is set to on.
Check if AC or DC power plug of the
mains unit is properly connected.
Check if there is power at the AC or
DC outlet.
DISTORTED SOUND FROM HIFI
AMPLIFIER
NO PICTURE
Check to make sure that no audio
connections are made to the amplifier
phono input.
Check if the mode it set to proper
state, such as DVDmode, AV1
mode, AV2 mode and RGB mode.
Check the video connection.
NO RETURN TO START-UP SCREEN
WHEN DISC IS REMOVED
DISTORTED PICTURE
Check the disc for fingerprints and
clean with soft cloth, wiping from
centre to edge.
Sometimes a small amount of picture
distortion may appear. This is not a
malfunction.
Press POWER to turn off the unit, then
press it again to turn on the unit.
Press reset button on the front of the
DVD unit.
THE PLAYER DOES NOT RESPOND
TO THE REMOTE CONTROL
Aim the remote control directly at the
sensor on the front of the player.
Avoid all obstacles which may interfere
with the signal path.
THE PICTURE IS OVER DARK, OVER
BRIGHT OR HAS NO COLOR
Press PICTURE button on the monitor
panel, then press VOLUME+ button
VOLUME- button to increase or
decrease the level of the
Inspect or replace the remote control
batteries.
corresponding item (BRIGHT,
CONTRAST,COLORor TINT)to proper
value, then you can get an optimum
picture effect.
DISTORTED OR B/W PICTURE
The disc format is not according to the
TV-set used (NTSC).
NO AUDIO AT DIGITAL OUTPUT
Check the digital connections.
Check the Digital Audio menu to make
sure that the digital output is correctly
set.
COMPLETELY DISTORTED PICTURE
The disc format is not according to the
TV-set used (NTSC).
30
TROUBLE SHOOTING
Check if the audio format of the
selected audio language matches your
receiver's capabilities.
BUTTONS DO NOT WORK
Turn the player off and on with the
power on/off button on the front of the
player.
Press Reset button on the front of the
DVD unit.
31
SPECIFICATIONS
DVD
Supply voltage
Current consumption
Signal system
Discs played
: 12V DC (11V-15V),test voltage 14.4V, negative ground
: Less than 2A
: Compositive video 1.0Vp-p 75
: (1) DVD-VIDEO disc
5" (12 cm) single-sided, single-layer
5" (12 cm) single-sided, double-layer
(2) Compact disc (CD-DA/CD-R/CD-RW/MP3)
(3) 5" (12 cm) Video CD
Audio output level
Audio signal output
characteristics
: 10k (2 ch 2.0 Vrms)
: (1) Frequency response
(2) S/N ratio
(3) Wow and Flutter
: 6.5"TFT
: 1440x234 dots
20 Hz-20 kHz
80 dB (JIS)
Below measurable limits
Monitor Screen Size
Resolution
Note:
Specifications and design are subject to modification, without notice, due to
improvements in technology.
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights owners. Use of this
copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
32
88-V1952-02
|