| motorola   BEFOREYOU   BEGIN   ® Portable Bluetooth   Hands-Free Speaker   Before using this product, read the Im portant Safety and   Legal Inform ation pam phlet and follow its instructions.   Take a moment before you get started to   familiarize yourself with your new   T305 Portable Bluetooth Hands-Free Speaker.   Speaker   Multi-Color   Indicator Light   and Call Button   Volume   Up (+)   Button   Volume   Down (-)   Button   (on side)   Power   Microphone   Button   T305   Get connected in 4 quick steps.   CHARGEYOUR   START BLUETOOTH   2 1 FEATURE   HANDS-FREE SPEAKER   Your Phone   Charge your hands-free speaker's battery for   2 hours:   Your phone's Bluetooth feature is off by default.   To use your hands-free speaker, you must turn   on the Bluetooth feature in your phone.   Charging   Port   For most Motorola phones (at the main menu):   Press   (Menu) > Settings > Connection >   1 M Note: Do not place hands-free speaker with clip installed   on visor when charging.   Bluetooth Link > Setup.   Scroll to Power.   Select Change.   Scroll to On.   Plug the Motorola charger into the charging   port on the end of the hands-free speaker.   1 2 2 3 4 5 The indicator light turns steadily red when the   battery is charging and the hands-free speaker   is turned off. It may take up to 1 minute for the   indicator light to turn on. When the hands-free   speaker's battery is fully charged (about 2   hours), the indicator light turns steadily blue.   Press Select to turn on the Bluetooth   feature. The Bluetooth feature remains on   until you turn the feature off.   Disconnect the charger.   Note: Hands-free speaker is functional while charging;   however, when charging the hands-free speaker while turned   on, the indicator light does not provide charging status.   Note: These steps are for most Motorola phones. For   other phones, see your phone's user's guide.   TROUBLESHOOTING   USING YOUR T305   My hands-free speaker will not enter pairing   mode.   See   Make sure that any devices previously paired with   the hands-free speaker are turned off. If the   indicator light is flashing in blue, turn off the other   device and wait for 10 seconds.The indicator light   becomes steadily lit in blue indicating the   hands-free speaker is now in pairing mode.   Features and   Functions Guide   on the reverse side   for information on   using yourT305   My phone does not find my hands-free speaker.   Make sure the indicator light on your hands-free   speaker is on and steadily lit in blue when your   phone is searching for devices (see step 3).   My hands-free speaker worked with my phone   before but now they are not working.   Make sure your phone is on and the Bluetooth   feature is turned on in your phone (see step 2). If   the Bluetooth feature was turned off or was turned   on only temporarily, you may need to restart the   Bluetooth feature (see step 2) and pair your phone   and hands-free speaker again (see step 3).   Support.   If you need more help, contact us at   1-877-MOTOBLU or visit us at   TURNING HANDS-FREE   SPEAKER ON AND OFF   To turn hands-free speaker on, press and hold   the Power button until the indicator light turns   purple.Then, release the button.   Features and   Functions Guide   T305   Portable Bluetooth®   Hands-Free Speaker   Note: Hands-free speaker may take up to 3 to 4 seconds to   turn on.   To turn your hands-free speaker off, press and   hold the Power button until the indicator light   turns purple and then turns off.   IMPORTANT:   Be sure to first follow the   To conserve battery power, your hands-free   speaker will turn off when not connected to   your phone for more than 30 minutes.   Power Button   Indicator Light   Quick Start Guide   on the reverse side   of this guide   to complete initial setup   of yourT305.   INSTALLING HANDS-FREE   INSTALLING HANDS-FREE   SPEAKER INYOUR CAR   Follow these steps to install your hands-free   speaker in your car:   SPEAKER INYOUR CAR   Continued   Slide the visor clip onto your sun visor.   2 Slide the visor clip onto the mounting bracket   on the bottom of the hands-free speaker. To   do this, place the loop end first onto the   hands-free speaker and slide forward as   shown below.   1 When installed, the Power button must be   facing toward you as shown.   The visor clip is reversible to allow placement   of your hands-free speaker on either the front   or the back of your car’s sun visor.   ADJUSTING HANDS-FREE   SPEAKERVOLUME   European Union Directives   Conformance Statement   Hereby, Motorola declares that this   product is in compliance with:   You can adjust hands-free speaker volume   using the Volume buttons. To adjust volume,   tap or press and hold button.   • The essential requirements and   other relevant provisions of Directive   1999/5/EC.   • All other relevant EU Directives.   Volume   Up (+)   Button   Product   Approval   Number   0168   Volume   Down (-)   Button   The above gives an example of a typical Product   Approval Number.   You can view your product’s Declaration of Conformity   (DoC) to Directive 1999/5/EC (to R&TTE Directive) at   product Approval Number from your product’s label in   the “Search” bar on the web site.   Note: Hands-free speaker volume cannot be adjusted   during an incoming call.   MAKING CALLS   MAKING CALLS CONTINUED   Function   Action   Function   Action   Make a voice dial call   Tap the Call button   and speak the   name after the tone   Answer a second   incoming call   Press and hold the   Call button (places   first call on hold)   End a call   Tap the Call button   (if a call is on hold,   tap twice to end all   calls)   Toggle between two   active calls   Press and hold   the Call button   Mute or unmute a call   Tap both Volume   buttons   Receive a call   Reject a call   Tap the Call button   Note: Some features are phone/network dependent.   Tap either Volume   button   Note: When turning on your hands-free speaker during a   phone call, audio is transferred automatically to your   hands-free speaker (when your hands-free speaker and phone   have previously been connected, and your phone supports   this feature).   Redial last call   Press and hold the   Call button until you   hear a beep   Note:YourT305 supports both Handsfree and Headset   Profiles. Accessing call functions depends upon which   profile your phone supports. See your phone's user's guide   for more information.   INDICATOR LIGHTS   AUDIOTONES   With the Charger Plugged In   The audio tones provide information about your   hands-free speaker status.   Indicator Light   Status   Note: Charging status not displayed when hands-free   speaker is in use.   AudioTone   Status   Single high tone when   pressing Volume button   Volume at minimum   or maximum   Steady red   Steady blue   Charging   Charging complete   Five rapid high tones   repeated every 60 sec.   Low battery   With No Charger Plugged In   No audio indications;   deteriorating quality   Out of range   Indicator Light   Status   Ring tone   Incoming call   Off   Power off   Single high tone   Single low tone   Pairing confirmation   Voice activation   Steady purple   Steady blue   Quick red flash   Powering up   Pairing mode   Battery low   Pairing successful   Dual high/low tone   (phone dependent)   Voice tag not   recognized   Blue with quick   purple flashes   Single high tone   Low to high tone   End call   Phone network   not available   Slow blue pulse   Blue flash   Connected (on a call)   Standby (not on call)   Incoming call   Two ascending tones   Two descending tones   Mute enabled   Mute disabled   Quick blue flash   Slow purple pulse   Muted   |