TV. VIDEO. AUDIO. MECABLITZ
Tiros
63 TG 51 - 100 MT
63 TG 62 - 100 MT
70 TG 65 - 100 MT
Ibiza-SF
Morea-S
Crystal
70 TG 53 - 100 MT
Linea
–SF 72 TG 67 - 100 MT
de luxe
Operating instructions
Remote control handset RB 11
The remote control sends commands to the TV set with the aid of infrared light. For this reason, you should always point the remote control at
the TV set for reliable operation. Use of the remote control may interfere with the operation of other devices or systems controlled which use
infrared light (such as infrared headphones).
The television must be switched on or in standby mode (ON/OFF key depressed) when it is to be operated by remote control. Always point the
remote control in the direction of the TV for operation. A pilot lamp starts to flash as soon as a key on the remote control handset is pressed.
Nota:
• Infrared window
For explanation of the video level for
the remote control of video recorders,
please refer to Section 13, page 42.
RB11
Do not point the remote control
unit into your eyes and press a
key on it !
• ON - Set switches to last viewed pro-
gramme
• OFF (standby setting)
100 Hz
VTR
Do not use rechargeable batteries
in the remote control unit.
1
4
7
2
5
8
0
3
6
9
• Numeric keys
• Switch between the TV and radio fun-
ctions (radio only if a SAT upgrade kit
is installed)
• Mute (page 14)
-/--
• Change the setting
• HiText - select page of a multiple-
page subject (page 32)
TIMER
P
+
• Next programme (page 6)
• HiText - select page number from table
of contents with cursor (page 32)
-
OK
•
Basic picture and sound settings (page 15)
• Hi-Text - display the page (page 33)
P
-
•
•
Select picture function (page 14)
HiText - select subject (page 30)
• Return to TV picture from menu or
from Hi Text
TV
• Call TV menu (page 7)
Within a menu, move back one step
MENU
•
•
Select sound function (page 14)
HiText - select chapter (page 30)
• Operator Help
•
•
Call station table
HiText - next page (page 31)
AV
B
•
•
AV recording (page 23)
HiText - skip to next mark (page 37)
REC
Ȅ
•
Function keys, depending on
programming (page 16)
•
Logo display (display of time, program-
me, and sound mode
• Clear key in various menus
C
• HiText- set or delete mark (pages 35/38)
• Return to the last programme (page 7)
PRG.
ɮ
• Changeover from spoken to
music broadcasts
• Change of format (variable zoom) (page 40)
IJ
IJ
• Still picture (page 41)
Batteries:
Insert the enclosed batteries in the remote
control, observing the symbols on the cover of
the battery compartment.
Disposal of batteries
Remove exhausted batteries from the remote
control and return them to your dealer or to an
authorised battery collection point.
Do not dispose of spent batteries with domestic rubbish.
Please return spent batteries to collecting points should they exist in your country !
3
1. Setting up and connecting
Setting up
Connecting the aerial
When selecting a suitable place for the TV, be sure that no bright
light or sunlight falls on the screen. Light may cause reflections
and impair the brilliance of the image.
Standard SAT and terrestrial station aerial sockets are fitted at
the rear of the TV.
The best viewing distance is five times the picture tube diagonal,
e.g. about 3.5 m for TV sets with a 70 cm screen.
Thunderstorms represent a danger for all electrical appliances! If
lightning strikes the power line or the aerial, the TV may be dama-
ged even if it is switched off. Therefore, always unplug the mains
lead AND aerial during thunderstorms.
5x cm
y
If the TV is not going to be used for an extended period of time, for
instance when on holiday, then disconnect the set both from the
mains and the aerial.
TV sets require adequate ventilation. The ventilation
slots at the rear of the set should therefore never be
covered by curtains, doilies, newspapers or similar
objects. Likewise, all slots at the bottom of the set
must be freely accessible so that the intake of air is
not impaired in any way
Aerial connection
2EURO-600
Do not set up the TV near a radiator as this would
impair adequate cooling.
Mains voltage
Do not place
Plug the mains lead into a wall
outlet. The TV set is equipped for
230 V ac (Australia 240 V ac).
-
burning candles or
- flower vases filled with water
on top of the TV set.
Hot wax and liquids destroy the electrical components
and jeopardize the electrical safety of the set
y
If you place the set in a wall unit, leave sufficient space
on all sides so that the air can circulate freely.
Your TV set is intended for use in dry rooms. If you wish
to use it occasionally outdoors, be sure to protect it
against any kind of moisture (rain, splashes, dew, etc.).
4
1.1 Turning the TV on and off
Turning on with the ON/OFF key
Turning on with the remote control
The programmes can be directly selected with the 0-9 keys
when the television is in standby mode.
The last programme watched before the television was switched
Before turning on a cold TV in a warm room, first
allow any condensation mist that may have formed
on the screen to evaporate.
off can be set with the
key.
The television is automatically set to standby mode ten minutes
after station closedown. However, this is not the case if the
station starts to transmit a test card within these ten minutes.
Press the ON/OFF key.
Programme position 1 is then selected. Depending on the assign
-
ments made, the following information will appear in the screen
box:
Turning off with the remote control
Press the
key to switch the TV to standby mode. The stand-
by status is indicated by the red lamp.
Pr 1
MONO
Turning off with the ON/OFF key
ARD
18:15:33
Press the ON/OFF key. The television is now disconnected from
the mains. You are advised to turn off the TV with the ON/OFF
key after station closedown and when it is not going to be used
for an extended period of time.
The programme position is also shown on the permanent dis-
play.
1.2 The TV menu
The screen displays
Press this key on the remote
control....
Explanation
MENU
TV
?
return
picture
Help
The desired language for the entire TV menu is
adjusted in the „Equipm.Configuration“ menu.
1. Call the Equipm.
Configuration menu
-
Equipm. configuration
Function keys
Select the desired language with the
keys when
MENU
red
green
the submenu for the language is displayed on a green
background.
1
2
5
8
0
3
6
9
4
7
Device connection
SAT settings
--/-
2. Adjust the language
OK
Press the
key to confirm and store the selection
P
+
-
OK
made. The complete text in the TV menu is then
displayed in the selected language.
P
-
-
TV
MENU
?
AV
Language:
further
English
i
A
B
AV
store ?
OK
3. Store the selected language
6 9 6 + 0 5 A - G B
OK
TV
TV picture
5
Programme position
management
2. Programme selection
This TV set can manage up to 225 TV programme positions. If you are connected to a cable network or use a terrestrial aerial, you will not need all
of these positions at the moment. If, however, you have a SAT upgrade kit installed, the number of programmes can increase drastically. We do not
know how many programmes will be available in the future. For this reason, we have provided plenty of programme positions in reserve. For
selection of the desired programme position, we have invented a simple input method which saves you having to enter three digits for each position.
The first digit you enter is normally the hundreds digit. If, however, you have less than 100 programmes stored, this digit auto-
matically moves to the tens position. If you have less than ten programmes stored, it moves to the units position.
ᕪ
ꢀ
ꢀ
Example: you have stored programmes in positions 1 to 35 and you want to select position 3. Press the keys and or simply and
confirm with
OK
ᕤ
. Programme position 4 can be selected by simply entering , since there are no programme positions higher than 39.
Further examples are shown in the following text.
Press this key on the remote
The screen displays
Explanation
control....
Only the programme positions 0-9 in the station table
may be occupied if a programme is to be selected by
pressing one numeric key.
1. Select programme position
2 (only the first 9 programme
positions in the station table
are occupied)
Pressing the numeric key opens a time-delay win-
dow* which waits for 3 seconds for the input of
further digits. If no further numeric key is pressed,
the TV set switches to the programme position
selected with the first digit.
2
Pr 2
MONO
ZDF
18:15:33
* The operating mode of this time delay window can
be changed: see page 18, item 5, „PC time out“.
Only the programme positions 0-99 in the station table
may be occupied if a programme is to be selected by
pressing two numeric keys.
2. Select programme position
25 (only the first 99 pro-
gramme positions in the
station table are occupied)
After a programme has been selected successfully, a box
containing the programme position number, the time and the
current sound mode (e.g. stereo) is displayed on the screen.
2
5
Pr 25
MONO
To select a programme position with only a single-digit
ᕪ
S-RTL
number, you must enter
before the related digit,
18:15:48
ᕪ
ᕢ
ᕢ
e.g.
and ; alternatively, you can press
and
OK
then press
.
3. Select programme position
101 (more than 100 pro-
gramme positions in the
station table are occupied)
In this case, more than 100 programme positions in
the station table are occupied, which means that you
have to press three numeric keys.
After a programme has been selected successfully, a box
containing the programme position number, the time and the
current sound mode (e.g. stereo) is displayed on the screen.
1
0
1
To select a programme positions with a single-digit or
Pr 101
MONO
ᕪ
two-digit number, you must enter
before the
and ; alternatively, you
Nord3
18:15:48
ᕪ ᕪ
ᕢ
related digit(s), e.g.
ᕢ
OK
can press and then press
.
You can step sequentially through the programme
4. Next programme
P
-
P
+
positions with the
keys. If either of these keys
ZDF
is held down for more than two seconds, a programme
BR3
RTL
box for selection of the desired programme is displayed
SAT1
RTL2
PRO7
EUSPO
NTV
P
-
P
+
on the screen. Release the
or
key as soon as
P
+
the desired logo is highlighted in white: this programme
position will then be selected.
NORD3
MDR3
SWF3
Pr 3
MONO
Bayern 3
18:15:48
P
-
6
2. Programme selection
Press this key on the remote
control....
The screen displays
Explanation
Last programme
With this key, you can switch back and forth between
the last two programme positions you selected.
Example:
You are watching a programme on ITN; during the
commercials, you switch to BBC with the aid of the
ᕪ . .ᕩ
numeric keys
PRG.
You can now switch back and forth between ITN and
PRG.
BBC by pressing the
key.
2.1 TV menu and operator help
Menu control of the TV, and the versatility of the system, ensure that supposed complicated settings and entries are made easily and clearly
?
comprehensible for everyone. Operator Help can be called with the
individual keys.
key when in TV mode. Operator Help indicates the functions of the
?
All settings are entered by way of different submenus. Simply call Operator Help with the
key should you encounter difficulties in entering
the different equipment configurations or if problems arise in operating the TV. Operator Help is specifically matched to the corresponding menu
and functions as a reminder when settings are entered or programmed.
Press this key on the remote
The screen displays
Explanation
control....
?
return
Operator Help shows the functions of the individual
keys when in TV mode.
Operator Help: Call/exit
Operator help
Switch set on/off
Prog select
The A, B, and C function keys can be programmed by
the user. Consequently their functions can differ to
those shown in the adjoining picture.
0
9
P
-
P
+
Next programme
Basic video/audio settings
Sound interrupt
OK
1
2
5
8
0
3
6
9
4
7
-
Change vol./adj. function
/
Sel.video/audio funct.
--/-
Station table
AV recording
Logo
Operator Help can be called for each menu displayed
on the screen. (Example: Operator Help with displayed
TV menu).
P
+
AV
TV
-
OK
?
P
-
Teletext/TV picture
TV-menu
TV
MENU
MENU
?
Operator help : ON / OFF
?
A
B
Muting -12dB
sound effects
Infotext
A
B
AV
C
Last program
Var. format
ɮ
Spch/mus.
Still
IJ
600+Help-GB
MENU
TV
?
return
picture
Help
The individual menu lines are selected with the coloured
keys of the remote control, to open the corresponding
submenu. Keys not enhanced in white or colour on the
displayed menu have no function in the current
operating state.
TV menu: Call/exit
TV-menu
Video standard values
Audio standard values
Station settings
1
2
5
8
0
3
6
9
4
7
--/-
Settings in the submenus can be changed
-
P
+
-
with the
keys.
OK
P
-
TV
OK
Press the
key to confirm and store the
MENU
AV
Timer/childlock
?
new setting.
A
B
MENU
AV
MENU
Press the
key to move back by one step
Equipm. configuration
within the TV menu.
6 9 6 + 0 2 - G B
7
Colour and transmission
standards
3. Presetting TV stations
In the sub-menu Standard, you can select the colour and/or the transmission standard. The TV set normally recognises the colour stan-
dards (PAL, SECAM, NTSC) automatically, but the transmission standard must always be set manually. The multi-standard upgrade kit is
required for the additional transmission standards L, I, D/K and NTSC 4.43. In exceptional cases, the colour standard may not be recogni-
sed; if this happens, you must set it as described below.
Example:
The colour standard „NTSC“ is to be set.
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
The automatic function of the submenu „Standard“ is
preset in the factory.
return
picture
Help
1. Call submenu „Standard“
TV station table
The settings PAL, SECAM and NTSC need to be selecte
manually only if the automatic detection function does
not recognize the colour standard correctly.
d
Programme
LM
Pict. Sound
Std
0
1
2
3
4
5
6
7
8
9
VTR1
ARD
ZDF
Auto.
Auto.
Auto.
Auto.
o.
o.
o.
o.
o.
o.
—
—
—
—
—
—
—
—
white
red
SAT 1
Standard
Colour standard
B/G
Automatic
white
Logo, Channel, Signal
6 0 0 + 0 3 K - G B
MENU
ꢀ The transmission standard must always be set
TV
?
return
picture
Hel
2. Select the transmission
standard or colour standard
(e.g. standard I)
manually.
-
TV station table
Programme
LM
The various standards can be selected with the
keys.
Pict. Sound
Std
In this example, the transmission standard NTSC is
selected.
0
1
2
3
4
5
6
7
8
9
VTR1
ARD
ZDF
Auto.
Auto.
Auto.
Auto.
o.
o.
o.
o.
o.
o.
—
—
—
—
—
—
—
—
B/G
NTSC
SAT 1
The multi-standard upgrade kit 031 NC 1030 (optional
extra) is required for the reception of the transmission
standards L, I, D/K and NTSC 3,58.
yellow
Standard
Colour standard
-
store ?
OK
Logo, Channel,
3. Store the settings and
return to the TV picture
OK
TV
8
Direct channel entry/
station search
3. Presetting TV stations
When the TV set leaves the factory, there are no stations programmed. Depending on where you live, the stations have different channel
numbers. There are three possible ways of programming the stations:
a) Direct channel input
b) Station search
c) the Autostore function
Press this key on the remote
control....
The screen displays
Explanation
With direct channel entry it is necessary to know the
MENU
TV
?
return
picture
Help
1. Call the station table and
channel type survey
type of channel and the channel number.
TV station table
Logo
If type and number of channel are not known, you can
scan through the entire reception range with the
search function to locate stations.
Prog
LM
Signal
Chan./Freq
.
0
1
2
3
4
5
6
7
8
9
LOGIC
ARD
00
06
34
40
Video Rec.1
Aerial
Aerial
Aerial
The station table lists all the preset stations.
These stations can be changed at any time.
ZDF
white
SAT 1
Std channel
06
ARD
Spec. channel
Fine tuning
SAT-Frequ.
The cursor always highlights the type of channel
currently preset in the given programme position.
yellow
Aerial control
Std, Pict., Sound
For the search function it is advisable to switch to a
vacant programme position.
6 9 6 + 0 3 A - G B
MENU
TV
?
return
picture
Help
Two types of channels are offered in the box with the
yellow frame. Select the desired channel type with the
related coloured keys.
2. Select the type of channel
(e.g. standard channel)
TV station table
Prog
LM
Logo
Signal
Chan./Freq
.
Once the channel type has been selected, a channel
number is displayed for the highlighted item if a station
is stored in this programme position. If no station is
stored, two dashes are displayed.
0
1
2
3
4
5
6
7
8
9
LOGIC
ARD
00
06
34
40
Video Rec.1
Aerial
Aerial
Aerial
blue
ZDF
SAT 1
Std channel
06
ARD
„SAT freq.“ and „Aerial control“ can be selected only if
a SAT upgrade kit is installed in the TV set.
Spec. channel
Fine tuning
SAT-Frequ.
Aerial control
Std, Pict., Sound
6 9 6 + 0 3 A - G B
MENU
TV
?
return
picture
Help
With direct channel entry, the station table is briefly
faded out when the channel number is entered, and
the selected station is displayed.
3. Enter the channel number
(Example: Standard channel
06) or start station search
TV station table
Prog
LM
Logo Chan./Freq
.
Signal
The station search proceeds from the displayed
channel number in a forward sequence with the
key, and in a reverse sequence with the - key.
Search proceeds from the lower channel area
upwards or downwards when two lines are displayed.
The search stops when a station has been found.
0
1
2
3
4
5
6
7
8
9
LOGIC
00
06
34
40
Video Rec.1
Aerial
ARD
ZDF
Aerial
SAT 1
Aerial
0
6
Std channel
06
ARD
Spec. channel
Fine tuning
SAT-Frequ.
or
Aerial control
-
Proceed as described in step 4 if the located station is
to be stored.
Press the or - key if the located station is not to be
stored so that the search can be continued.
Std, Pict., Sound
store ?
OK
6 9 6 + 0 3 A - S - G B
4. Store the setting and return
to TV picture
Complete fine tuning if station reception is not clear
(see Section 3.2).
TV picture
OK
TV
9
Autostore function,
sorted to countries
3. Presetting TV stations
The autostore function automatically scans through the entire reception range to locate stations. The located stations are presented in
OK
the station table and can then be stored by way of the
key.
If you do not like the order in which the stations appear in the station table, you can sort the stations to match your own requirements as
described on the next page.
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help
1. Call the menu
„Station settings“
Station settings
Station table
1
2
5
8
0
3
6
9
4
7
Autostore
MENU
--/-
P
+
-
OK
SAT programming
Station table
P
-
white
TV
MENU
AV
?
A
B
AV
©
VTR
6 0 0 + 0 3 B - G B
MENU
TV
?
return
picture
Help
Press the yellow key to call the autostore function.
2. Call and start the autostore
function
The coloured keys can now be used to select the
country so that the stations which are detected are
stored in a logical order for this country.
Autostore
Channel
Programme
Signal
OK
Press the
key to start the station search. The TV
yellow
blue
set now scans through the entire reception range.
TV
sort for
Germany
Austria
This function can be cancelled by pressing the
key.
Switzerland
others
AV
OK
6 9 6 + 0 3 C 1 - G B
start ?
OK
MENU
?
TV
Help
When all available stations have been found, a station
list is displayed on the screen.
return
picture
3. Edit and store the station list
Autostore
The channel number and an automatic logo are dis-
played. The auto logo only appears for stations which
transmit a VPS signal.
1
4
7
2
5
8
3
6
9
Signal
Programme Channel
ARD
ZDF
06
34
40
59
25
05
21
40
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
You can now delete stations which are not wanted, or
which are received only poorly, by pressing the blue
key.
SAT 1
BR 3
WDR 3
MDR
PRO 7
RTL
Enter the number of the programme position at which
storage of the detected stations is to start.
0
Now proceed as described in Section 3.1 Sorting
station.
ARD
delete
18 stations
from nr. of progr.
0 0 1
OK
10
3.1 Sorting stations
In the „Sort“ submenu you can move, exchange, copy, or delete the stationss stored in the programme positions. The „Sort“ submenu is
displayed automatically after the autostore function has found all available stations.
This menu can also be called at any time from the station table display for subsequent modification of the station programming.
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help
When the „Sort“ submenu is displayed, the function
„Move“ is preset. The station displayed for the
currently selected programme position can be stored
or moved to any other programme position.
1. Call the „Sort“ submenu
and move the station
TV station table
Pro
LM
Logo
Channe
l
Sign
g
al
either automatically after autostore
or
0
1
2
3
4
5
6
7
8
9
VTR2
02
Video
For a move, exchange or copy operation, the three-
digit number of the destination programme position
must be entered with the numeric keys. The blinking
hyphen on the right of the sub-menu is the prompt for
input of a programme position number.
ARD
06
34
Rec.2
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
ZDF
SAT 1
RTL
40
36
BR 3
N 3
59
white
S23
12
MDR 3
SWF 3
MDR 3
45
S05
If you inadvertently delete a station you wanted to
keep, you can restore it with the B key.
sort
move
Pr1 ➔ Pr - -
Pr1 ➔ Pr - -
A
exchange
copy Pr 1 ➔ Pr - -
Pr 1 delete
An incorrectly entered programme position number
can be deleted with the C key.
AV
MENU
TV
?
return
picture
Help
2. Exchanging two programme
positions
TV station table
Pro
LM
Logo
Channe
l
Sign
al
yellow
g
0
1
2
3
4
5
6
7
8
9
VTR2
02
Video
ARD
06
34
Rec.2
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
You can swap the contents of two programme positions
by pressing the yellow key and entering the digits.
ZDF
1
4
7
2
5
8
0
3
6
9
SAT 1
RTL
40
36
BR 3
N 3
59
S23
12
MDR 3
SWF 3
MDR 3
45
S05
sort
move
exchange
copy Pr 1 ➔ Pr - -
Pr1
➔
Pr - -
Pr1 ➔ Pr - -
AV
Pr
1
delete
MENU
TV
?
return
picture
Help
After the contents of a programme position have been
moved, exchanged, copied or deleted, a red store box is
displayed to ask if you want to store the new settings.
3. Store the settings
TV station table
Pro
LM
Logo
Channe
l
Sign
OK
g
al
Press the
key to store the new settings or press
0
1
2
3
4
5
6
7
8
9
VTR2
02
Video
TV
the
key to abort the operation.
ARD
06
34
Rec.2
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
ZDF
SAT 1
RTL
40
OK
36
BR 3
N 3
59
S23
12
MDR 3
SWF 3
MDR 3
45
S05
sort
move
Pr1 ➔ Pr - -
exchange
Pr1 ➔ Pr - -
copy Pr 1 ➔ Pr - -
Pr 1 delete
store ?
AV
OK
4. Return to TV picture
TV
11
3.2 Fine tuning
The individual channels are automatically tuned to channel centre for station tuning. As a rule, this automatic tuning will be sufficient.
Apply manual fine tuning if automatic tuning does not produce satisfactory results.
Select the programme number at which fine tuning is to be completed.
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
The „Fine tuning“ function is only activated when the
corresponding line is highlighted.
return
picture
Help
1. Select the fine tuning
function
TV station table
Chan./Freq
.
Prog
LM
Logo
Signal
0
1
2
3
4
5
6
7
8
9
LOGIC
ARD
05
06
34
40
LogicVTR+D
Aerial
white
ZDF
Aerial
SAT 1
Aerial
Std channel
yellow
Spec. channel
Fine tuning
SAT-Frequ.
00
Aerial control
white
Std, Pict., Sound
6 9 6 - 0 3 G - G B
Adjus- t fine tuning within the range of -99 to +99 with
2. Adjust the fine tuning
the
keys.
The station table is blanked out for better picture
assessment.
SAT 1
Std channel
40
Aerial
Spec. channel
Fine tuning
SAT-Frequ.
-
00
Aerial control
s85 -23.567 re B Q BT /F18 219.397 345f
OK
3. Store the fine tuning and
return to TV picture
Once the station is correctly tuned, press the
to store the new setting.
key
OK
TV
12
3.3 Allocating a station logo
A logo of up to 8 characters is provided for each station via the VPS signal. The station RTL 2, for example, receives the logo RTL 2.
Manual logo allocation is not necessary with most stations. The corresponding station logo appears a few seconds after the picture when
a station is selected by direct channel entry. However, an automatic logo only appears for stations which transmit a VPS signal.
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help
The logo is automatically displayed if the selected pro-
gramme position already has a logo. The field remains
blank if a logo has not yet been allocated.
1. Call the logo menu
TV station table
Chan./Freq
.
Prog
LM
Logo
Signal
Automatically identified logos may consist of up to
8 characters. Manually allocated logos are limited
to 5 characters.
0
1
2
3
4
5
6
7
8
9
AS
ne
ne
Logo:
white
blue
ABCDEFGHIJKLMNOPQRSTUVW
ne
ne
ne
XYZ
0123456789
!+-
ne
ne
ne
ne
P
+
-
select
P
-
Any existing logo will be overwritten.
next number
696+03H-GB
MENU
TV
?
return
picture
Help
Select the desired- character (in our example the letter
P
-
P
+
R) with the keys
,
,
.
2. Select the first character
TV station table
Logo Chan./Freq
This will overwrite any existing logo.
Prog
LM
.
Signal
0
1
2
3
4
5
6
7
8
9
AS
ne
ne
Logo:
R
P
+
ABCDEFGHIJKLMNOPQRSTUVW
ne
-
ne
ne
XYZ
0123456789
!+-
ne
ne
ne
ne
P
+
-
select
P
-
P
-
next number
6 9 6 + 0 3 I - G B
store ?
OK
MENU
TV
?
return
picture
Help
The cursor is moved within the logo field with the blue
key.
3. Move the cursor to the
second position and select
the second character
TV station table
Logo Chan./Freq
Select the desired- character (in our example the letter
Prog
LM
.
Signal
P
-
P
+
T) with the keys
,
,
.
blue
0
1
2
3
4
5
6
7
8
9
AS
ne
ne
Logo:
Repeat this procedure to enter the entire logo.
R T
ABCDEFGHIJKLMNOPQRSTUVW
ne
ne
P
+
ne
XYZ
0123456789
!+-
ne
ne
ne
ne
-
P
+
select
-
P
-
next number
P
-
696+03J-GB
OK
After input of the desired logo, press the
store it.
key to
4. Store the setting and return
to TV picture
The programmed logo automatically appears in the
station table.
TV
OK
TV picture
13
4. Changing individual picture settings
Press this key on the remote
control....
The screen displays
Explanation
Press the blue key to display the last adjusted func-
tion.
1. Adjusting the luminance
Continue pressing the blue key until the picture setting
value to be changed (e.g. luminance) is displayed.
Luminance
-
blue
-
-
OK
40 change:
You can now adjust the contrast with the
keys.
-
Set the desired value with the
keys.
Contrast
-
Chrominance and sharpness are adjusted in the
same manner.
OK
OK
OK
40 change
Chrominance
-
-
+
40 change
2. Adjusting the contrast
Sharpness
blue
R
02 change
-
4.1 Changing individual sound settings
Press this key on the remote
control....
The screen displays
Explanation
Press the yellow key to display the last adjusted function.
Continue pressing the yellow key until the volume field
Volume
1. Adjusting the volume
-
OK
30 change:
is displayed on the screen.
-
Treble
+
yellow
Set the desired value with the
keys.
-
-
-
L
OK
OK
25 change
25 change
00 change
-
Bass
+
-
2. Adjusting the treble setting
Balance
Press the yellow key a number of times until the treb-
-
-
-
R
OK
OK
OK
le field is displayed on the screen.
-
yellow
Set the desired value with the
keys.
Sound effects
Spatial sound On/Off
Bass, balance, sound effects and speaker sound-
mode settings are adjusted in the same manner.
change
-
Sound-mode speaker
Mono/Stereo/Chann.1/Chann.2
change
6 9 5 - D - G B
Press the
key to mute the sound.
Volume
3. Sound mute
-
OK
change:
Renewed depression of the
to the previously adjusted volume.
key resets the sound
6 9 5 + D X - G B
Note:
All settings modified in this menu can be stored by calling the „Video standard values“ or „Audio standard values“ menu respectively
OK
OK
and pressing the
key. The stored values can be recalled at any time with the
key.
14
4.2 Adjusting the video and audio standard values
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help
Press any coloured key to step through the submenus.
Pressing the blue key selects the „Video standard
values“ submenu, pressing the yellow key selects the
„Audio standard values“ submenu
1. Call the TV menu
TV-menu
Video standard values
1
2
5
8
0
3
6
9
4
7
Audio standard values
Station settings
--/-
MENU
P
+
-
OK
P
-
TV
MENU
AV
Timer/childlock
?
A
B
AV
Equipm. configuration
Luminance, contrast, chrominance, tint * and sharpness
can be adjusted in the „Video standard values“ sub-
menu. Select the menu line with the value to be chan-
ged by pressing the assigned colour keys.
The picture sharpness can be set as the standard
value for all programme positions in the menu „Video
6 9 6 + 0 2 - G B
MENU
TV
?
return
picture
Help
2. Example 1: Call the „Video
standard values“ sub-
menu. Adjust and store
the sharpness.
Video standard values
standard values“. The new value can be saved by
Luminance
1
2
5
8
0
3
6
9
40
OK
pressing the
key.
4
7
blue
Contrast
The volume, treble, bass and balance settings, as well
as the headphones volume, can be adjusted in a similar
manner in the „Audio standard values“ submenu.
The menu item „colour balance“ is displayed only
--/-
50
P
+
-
OK
Chrominance
red
P
-
36
TV
MENU
-
Tint
?
A
B
-
+
00
when receiving from an NTSC station.
AV
-
Sharpness
Adjust the desired value with the
keys.
2
696+04Aa-GB
store ?
OK
OK
If no other video standard values or audio standard
OK
values are to be changed, then press the
store the new setting.
key to
MENU
TV
?
return
picture
Help
3. Example 2: Call the „Audio
standard values“ sub-
menu. Adjust and store
the volume.
OK
The red store box disappears when the
pressed.
key is
Audio standard values
Volume
1
2
5
8
0
3
6
9
48
4
7
The value set in this manner remains stored even if
the TV is switched off with the main power switch.
yellow
Treble
--/-
-
-
-
+
+
+
23
42
00
36
P
+
-
-
OK
Bass
P
-
TV
MENU
AV
Balance
?
A
B
AV
OK
Volume headphones
696+04B-GB
store ?
OK
4. Return to TV picture
TV
15
Assigning the
function keys
5. Equipment configuration
?
The remote control handset has three factory programmed function keys A, B and C. Press the
key in normal television mode to reveal
the factory programming. The displayed Operator Help text describes the current programming in the last-but-one paragraph. This pro-
gramming can be changed according to your requirements in conformity with the displayed selection. This choice is described in the
„Glossary“ chapter.
Example of programming function key B: In TV mode, the B key is to activate the „subtitles“ function; in Hi Text mode, you can use it
for the „page stop“ function.
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help
1. Call the „Equipment
configuration“ menu
Equipm. configuration
Function keys
1
2
5
8
0
3
6
9
4
7
Device connection
MENU
--/-
P
+
-
OK
SAT settings
P
-
TV
red
MENU
AV
Language:
further
English
?
A
B
AV
696+05A1-GB
MENU
TV
?
return
picture
Help
The left-hand side of this menu shows the currently
valid programming of the function keys.
2. Call the „Function keys“
menu
L
M
Functions
Function keys
The window on the right-hand side indicates the sel-
ection that can be programmed.
Television
DVB On/Off
Logo
TV Muting -12dB
Answer
1
2
5
8
0
3
6
9
A
B
4
7
Pict. format
Speech-music
Sound effects
Stereo/ch. 1-2
Muting -12dB
Infotext
TV
Sound effects
Large letters
blue
--/-
The individual functions are explained in detail in
the „Glossary“ on page 50.
P
+
-
OK
TV
Infotext
Infotext
P
-
C
TV
MENU
?
Subtitles
Large subtitles
VTR-Operation
A
B
AV
6 0 0 + 0 5 M - G B
MENU
TV
?
return
picture
Help
Two functions can be programmed for function key B.
The upper line indicates the function programmed for
TV mode, the lower line the function programmed for
Hi Text mode.
3. Press the function key to be
programmed (in this exam-
ple: B key)
L
M
Functions
Function keys
Television
DVB On/Off
Logo
TV Muting -12dB
Answer
1
2
5
8
0
3
6
9
A
B
4
7
Pict. format
Speech-music
Sound effects
Stereo/ch. 1-2
Muting -12dB
Infotext
TV
Press the
key to switch between the two lines.
TV
Sound effects
Large letters
--/-
Press the B key to display the currently programmed
function.
B
P
+
-
OK
TV
Infotext
Infotext
P
-
C
TV
MENU
?
Subtitles
Large subtitles
VTR-Operation
A
B
AV
6 0 0 + 0 5 N - G B
16
Assigning the
function keys
5. Equipment configuration
Press this key on the remote
control....
The screen displays
Explanation
MENU
TV
?
return
picture
Help
P
+
Select the function in the right-hand field with the
or
soon as the cursor (a white bar) is moved.
4. Select the function for TV
mode (in this example
„Subtitles“)
P
-
L
M
key. The text on the left-hand side changes as
Functions
Television
DVB On/Off
Logo
Pict. format
Speech-music
Sound effects
Stereo/ch. 1-2
Muting -12dB
Infotext
Function keys
TV Muting -12dB
Answer
1
2
5
8
0
3
6
9
A
B
If the function „Subtitles“ has been programmed for
key B, the subtitles will be displayed when the TV set
is switched, if subtitles are actually transmitted with
the programme.
4
7
TV
Subtitles
Large letters
--/-
P
+
-
OK
TV
Infotext
Infotext
P
-
C
P
-
P
+
TV
MENU
?
Subtitles
Large subtitles
VTR-Operation
A
B
AV
store ?
OK
6 0 0 + 0 5 O - G B
MENU
TV
?
return
picture
Help
The cursor (a white bar) is now located in the second
line, on the currently programmed function.
5. Switch to Hi Text mode and
program the function keys
L
M
Functions
Videotext
no function
Infotext
Function keys
The desired Hi Text functions can now be programmed in
the sequence described in steps 3 and 4, above.
TV Muting -12dB
Answer
1
2
5
8
0
3
6
9
A
B
4
7
Answer
TV
Sound effects
Large letters
Large letters
Stop page
--/-
TV
P
+
-
OK
TV
Infotext
Infotext
P
-
C
TV
MENU
?
A
B
P
-
AV
P
+
store ?
OK
6 0 0 + 0 5 P - G B
MENU
TV
?
return
picture
Help
6. Store the assignments and
return to the „Equipment
Configuration“ menu
Equipm. configuration
Function keys
1
2
5
8
0
3
6
9
4
7
OK
Device connection
--/-
P
+
-
OK
SAT settings
P
-
MENU
TV
MENU
AV
Language:
further
English
?
A
B
AV
696+05A1-GB
7. Return to TV picture
TV
17
Settings for
programme change
5. Equipment configuration
Press this key on the remote
control....
The screen displays
Explanation
MENU
TV
?
return
picture
Help
The various TV stations transmit the sound at different
volumes. Some stations, for example, are always louder
than others, and some stations increase the volume
during the commercials.
1. Call the „Equipment
configuration“ menu
Equipm. configuration
Prog. change settings
1
2
5
8
0
3
6
9
MENU
4
7
If volume adaptation is active, these volume variations
are smoothed out.
Volume adaptation On
--/-
red
2x
P
+
-
OK
The setting selected here applies to all programme
positions.
P
-
TV
MENU
?
A
B
AV
600+05B-GB
MENU
TV
?
return
picture
Help
In this menu you can define the sound functions for a
2. Call the settings for
programme change
programme change.
-
Prog. change settings
In the first line of the menu, use the
keys to select
whether the mute function is to be retained („Yes“) or
to be cancelled („No“) when you change programmes.
No sound on PC :
Spat. sound on PC :
Stereo wide on PC :
PC time out
Yes
Off
Off
On
blue
2x
1
2
5
8
0
3
6
9
4
7
--/-
OK
The new settings can be stored by pressing the
P
+
-
OK
key.
P
-
TV
MENU
-
AV
?
A
B
AV
store ?
OK
696+05C-GB
-
MENU
TV
?
return
picture
Help
Use the
keys in this menu line to define whether
3. Set spatial sound when
changing programmes
the spatial sound is to be switched on or off when the
programme is changed to a monaural station.
Prog. change settings
No sound on PC :
Spat. sound on PC :
Stereo wide on PC :
PC time out
Yes
Off
Off
On
1
2
5
8
0
3
6
9
When in mono mode, you can change over to spatial
sound by pressing a self-defined function key (sound
effects).
4
7
yellow
--/-
P
+
-
white
OK
P
-
If no other values are to be changed, then press the
TV
OK
MENU
-
key to store the new setting.
AV
?
A
B
AV
The term „spatial sound“ is explained in the section
„Glossary“ on page 50.
store ?
OK
696+05D-GB
MENU
TV
?
return
picture
Help
The programme change „time out“ can be set to On or
Off.
4. Set the PC „time out“
Prog. change settings
On = the programme position changes three seconds
green
after input of the first digit.
No sound on PC :
Spat. sound on PC :
Stereo wide on PC :
PC time out:
Yes
Off
Off
On
1
2
5
8
0
3
6
9
Off = after input of the first digit, further digits must
-
4
7
OK
be entered or the
key must be pressed to
--/-
change the programme position.
P
+
-
-
OK
Select the setting On or Off with the
keys.
P
-
5. Store the settings and
return to the TV picture
TV
OK
Store the new settings with the
key
MENU
?
AV
A
B
AV
696+05T-GB
TV
OK
18
6. Volume adjustment and forced mono
It is possible for TV stations to be received at different volume levels although the volume level settings on the individual programme
positions are identical. To overcome this problem, you can set a volume correction factor for each programme position.
Example:
Programme 1 is soft: volume value 40. Programme 3 is loud: volume value 40. Programme 1 is to be adjusted to the same volume as
Programme 3. Switch over to programme position 1.
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help
In this submenu, you can assign a volume correction
factor to a programme position and, if necessary,
1. Call the sound submenu
and adjust the volume
TV station table
Programme
LM
activate forced mono sound mode.
-
Pict. Sound
Std
A volume correction factor can be set with the
when the text is displayed on a blue background.
keys
0
1
2
3
4
5
6
7
8
9
LOGIC
ARD
Auto.
Auto.
Auto.
Auto.
o.
—
—
—
—
—
—
—
—
white
red
ZDF
Press the key to enter a positive correction factor
which is added to the standard volume value (increa-
sing the volume). Press the - key to enter a negative
correction factor which is subtracted from the
standard volume value (decreasing the volume).
SAT 1
Volume adjustment
Forced mono
+00
o.
Off
o.
o.
o.
o.
yellow
Logo, Channel, Signal
-
In our example:
696+06A-GB
store ?
OK
Press the key and increase the volume until it is the
same as the volume on Programme 3. The resulting
correction factor could , for example, be displayed as 05.
MENU
TV
?
return
picture
Help
It may happen that the TV set inadvertently switches
from mono to stereo during a transmission,
although no stereo programme is being received.
This usually depends upon the prevailing reception
conditions.
2. Set forced mono
TV station table
Programme
LM
Pict. Sound
Std
0
1
2
3
4
5
6
7
8
9
LOGIC
ARD
Auto.
Auto.
Auto.
Auto.
to.
—
—
—
—
—
—
—
—
-
yellow
ZDF
Use the
keys to select forced mono.
SAT 1
to.
+00
Volume adjustment
Forced mono
-
If this setting is stored, all transmissions received in
this programme position will always be reproduced in
mono.
to.
Off
to.
to.
to.
Logo, Channel, Signal
696+06B-GB
store ?
OK
All changed settings are stored.
3. Store the setting and return
to TV picture
OK
TV
19
6.1 Correcting picture deviations
It is possible for stations to be received with differing levels of chrominance, picture sharpness and contrast, even though the settings on
the individual programme positions are identical. For this reason, your TV set enables you to correct the value for each programme
position and/or to select a picture correction function (CTI, noise reduction).
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help
The picture menu contains all settings which can
change the picture.
1. Call the first picture menu in
the station table and correct
the picture sharpness
TV station table
Programme
LM
The picture sharpness can be adjusted separately for
each station in the station table. This setting overrides
the standard setting.
Pict. Sound
Std
white
red
0
VTR1
ARD
ZDF
Auto.
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
—
1
2
3
4
5
6
7
8
9
OK
The new value can be saved by pressing the
key.
SAT 1
o.
Sharpness
Noise reduction
CTI
3
o.
The value set in this manner remains stored even if the
TV is switched off with the main power switch.
A1
o.
o.
On
blue
o.
o.
further
-
store ?
Logo, Chann
600+06C-GB
OK
This TV set is equipped with a special noise-reduction
function for use where the picture contains „snow“ or
is unclear. The noise reduction function can be set to
MENU
TV
?
return
picture
Help
TV station table
2. Switch on the noise
reduction
Pict. Sound
Std
A1: automatic motion compensation, slight noise
Programme
LM
reduction
0
1
2
3
4
5
6
7
8
9
VTR1
ARD
ZDF
Auto.
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
—
A2: automatic motion compensation, high noise
SAT 1
reduction,
yellow
o.
Sharpness
Noise reduction
CTI
3
o.
A3: no motion compensation, slight noise reduction),
A1
o.
o.
On
-
o.
o.
or OFF.
further
store ?
Logo, Chann
600+06D-GB
OK
MENU
TV
?
return
picture
Help
CTI stands for Colour Transient Improvement and
improves the transitions between different coloured
areas of the picture, making the picture appear much
sharper. The CTI function is effective for both trans-
missions received by way of the aerial input and for
signals received via the AV sockets. CTI also provides
a visible improvement when playing back from a video
recorder.
However, in certain applications (such as playing back
from an S-VHS video recorder), the CTI function may
just have the opposite effect.
When playing back from such recorders, CTI can result
in a lower-quality picture. For this reason, this menu
permits you to switch off the CTI function for specific
programme positions.
3. Switch on the CTI function
TV station table
Programme
LM
Pict. Sound
Std
0
1
2
3
4
5
6
7
8
9
VTR1
ARD
ZDF
Auto.
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
—
white
SAT 1
o.
Sharpness
Noise reduction
CTI
3
o.
-
A1
o.
o.
On
o.
o.
further
store ?
Logo, Chann
600+06E-GB
OK
MENU
TV
?
return
picture
Help
4. Call the second picture
menu and adjust the
chrominance
In this second picture menu, the chrominance, colour
offset and contrast can be corrected individually for
each programme position.
TV station table
Std
Pict. Sound
Programme
LM
0
1
2
3
4
5
6
7
8
9
LOGIC
ARD
Auto.
Auto.
Auto.
Auto.
o.
o.
o.
o.
o.
o.
—
—
—
—
—
—
—
—
red
In our example, the chrominance of Programme 1 is to
be diminished. Hold down the - key until the colour
intensity is the same as in programme position 3.
ZDF
SAT 1
00
0
Chrom. adjustm.
Col. offset adj.
Contrast adj.
Picture format
VCR
-
00
4:3
Off
AV
The chrominance adjustment range is -15 to +15.
If no other values are to be changed, then press the
Logo, Channe
store ?
OK
OK
key to store the new setting.
696+06G-GB
20
6.1 Correcting picture deviations
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help
Normally, it is not necessary to adjust the colour offset.
5. Adjust the colour offset
or contrast
However, if external units are connected it is possible that
colour and black-and-white pictures are not accurately
superimposed. A similar effect is sometimes encountered
in journals when the black-and-white and colour
impressions do not register, with the result that the
contours are blurred. The colour offset adjustment has
no effect on an RGB input.
TV station table
Std
Pict. Sound
Programme
LM
0
LOGIC
ARD
Auto.
Auto.
Auto.
uto.
o.
o.
o.
o.
o.
o.
—
—
—
—
—
—
yellow
1
2
3
4
5
6
7
8
9
ZDF
or
00
0
Chrom. adjustm.
Col. offset adj.
Contrast adj.
Picture format
VCR
00
4:3
Off
white
AV
The contrast adjustment range is -15 to +15.
-
Logo, Channe
If no other values are to be changed, then press the
store ?
OK
696+06H-GB
OK
key to store the new settings.
MENU
TV
?
return
picture
Help
The picture format of a normal TV set is 4:3. If an input
signal in 16:9 format is applied to the EURO socket,
the picture format is changed automatically. If a 16:9
input signal is applied to the phono (cinch) sockets or
the mini-DIN (YC) socket, the picture format must be
changed manually.
6. Change the picture format
TV station table
Programme
LM
Std
Pict. Sound
0
1
2
3
4
5
6
7
8
9
LOGIC
ARD
Auto.
Auto.
Auto.
uto.
o.
o.
o.
o.
o.
o.
—
—
—
—
—
—
—
—
ZDF
green
00
0
Chrom. adjustm.
Col. offset adj.
Contrast adj.
Picture format
VCR
An external switching voltage of 4-7 V at the EURO
socket automatically switches the TV to 16:9 format,
provided that the signal type was stored under the
heading „...controls AV operation“ in the menu
„Equipm. configuration, device connection“.
00
4:3
Off
AV
-
Logo, Chann
store ?
OK
696+06I-GB
7. Store all settings and return
to TV picture
OK
TV
21
Camcorder ➜ video recorder
7. AV recording
In the „AV recording“ menu, you can define which of the connected peripheral AV devices are to be used for copying a recording.
AV device is a generic term for all external video units, such as video recorders, camcorders,video disk players, photo CD players, etc
which can be connected to a TV.
Example: You wish to copy a film recorded with an S-VHS/Hi8 camcorder to an LogicVTR video recorder which is also connected to the
TV set.
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help
In the „AV recording“ menu , you can select how the
AV devices connected to your TV set (see Section 14,
„Equipment configuration/Connecting external devices“)
are to be used for copying a recording.
1. Call the AV menu
AV-recording
Input
Output
blue Camcorder
Camcorder
Logic VTR
The left side of the menu (Input) shows the devices
which supply picture and sound for the copy operation.
yellow
Logic VTR
AV
Selection of an input for a programme is meaningful
only for SAT or decorder operation.
Pr. 1: RTL 2
The right side of the menu (Output) shows the devices
capable of recording the picture and sound.
no recording
6 0 0 + 0 7 A - G B
A Device connection
MENU
TV
?
return
picture
Help
After calling this menu, you must first select the input
device, i.e. the device which is to supply the picture.
2. Select the desired AV devi-
ces (in this example: Cam-
corder and LogicVTR)
AV-recording
After selection of an input, the menu automatically
returns to the output page, where the AV device for
recording is selected.
Input
Output
blue
Camcorder
LogicVTR
Camcorder
LogicVTR
yellow
Back to the example:
You want to copy the film from the camcorder to Logic
VTR.
blue
Pr: RTL 2
EURO1:
Video
EURO2:
Video
Camcorder ➜ LogicVTR
record ?
Press the blue key to display the signal from the cam-
corder on the screen.
6 0 0 + 0 7 B - G B
OK
A Device connection
The copy operation with the selected devices is now
active.
3. Store the settings and clear
the menu
If any subsequent switching operations could interfere
with copying, a warning box with the text „AV recor-
ding“ will be displayed and the requested switching
operation will not be executed.
OK
TV
AV
To check the progress of the operation, press the
key
4. Terminate or abort the
copy operation
to display the picture from the input device on the screen.
If you wish to execute the copy operation in standby
mode, you can switch the TV set to this mode by pres-
AV
OK
sing the
key.
If this setting is not stored, the programme position must
be selected again in order to display the TV programme.
TV
22
Video recorder ➜ video recorder
7. AV recording
Example:
You want to play back a film from the logic video recorder connected to the EURO 2 socket and record it on the video recorder 2 connected
to the EURO 1 socket.
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help
1. Call the AV menu
AV-recording
Input
Output
blue Video Rec.2
Video Rec.2
Logic VTR
AV
yellow
Logic VTR
Pr. 1: RTL 2
no recording
6 0 0 + 0 7 C - G B
A Device connection
MENU
TV
?
return
picture
Help
After calling the menu, you must first select the input
device which is to supply the picture. In our example,
you select Logic VTR by pressing the yellow key.
2. Select the desired AV device
(in this example:
LogicVTR)
AV-recording
Once you have done this, the cursor moves to the out-
put side of the menu and the logic video recorder is
selected automatically, since there is no other choice.
Output
Input
blue
Video Rec.2
LogicVTR
VideoRec.2
LogicVTR
yellow
yellow
Pr: RTL 2
EURO1:
Video
EURO2:
Video
Camcorder ➜ LogicVTR
Logic VTR ➜ Videorec.2
record ?
6 0 0 + 0 7 D - G B
OK
A Device conn
The copy operation with the selected devices is now
active.
3. Store the settings and
clear the menu
If any subsequent switching operation could interfere
with copying, a warning box with the text „AV recor-
ding“ will be displayed and the requested switching
operation will not be executed.
OK
TV
AV
To check the progress of the operation, press the
key to display the picture from the input device on the
screen.
If you wish to execute the copy operation in standby
mode, you can switch the TV set to this mode by pres-
sing the
key.
4. Terminate or abort the
copy operation
AV
OK
TV picture
TV
23
Switch-on/off and
reminder time
8. Time settings
In the „Time settings“ menu, you can enter settings which will instruct the TV to switch itself on or off, and to display a reminder at a given time.
Switching from summer time to winter time and vice versa is carried out automatically by the teletext clock or when the set is
switched from standby mode to programme position 1.
The switch-on time function will automatically turn on the TV at the preset time if the television is in standby mode. The switch-off time
function will automatically switch it off as desired. The reminder service is intended to help you remember things which you have to do
later on, for instance a telephone call. All three settings can be jointly programmed.
Example: The TV is to switch itself on at 20:00 hr, remind you of something at 21:45 hr, and switch itself off at 23.30 hr.
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
The adjoining picture shows the appearance of the
„Time settings“ menu when no times have been pro-
grammed.
return
picture
Help
1. Call the „Time settings“
menu
Time settings
Switch-on time:
Switch-off time:
Reminder time
Time of day:
Off
1
2
5
8
0
3
6
9
4
7
MENU
Off
--/-
P
+
-
OK
-- : --
P
-
green
blue
TV
MENU
?
AV
08 : 22
A
B
AV
696+08A-GB
-
MENU
TV
?
return
picture
Help
First press the blue key and then press the or the
key to switch on the function.
2. Enter the switch-on time
(Example: 20.00 hr)
Time settings
Enter the desired switch-on time with the numeric keys.
The function is activated after input of the last digit.
Henceforth the TV set will switch itself on every day at
the preprogrammed time.
When switched on, the TV displays the programme positi-
on which was selected when it was last switched off.
The screen displays On - -.
Switch-on time:
Switch-off time:
Reminder time
Time of day:
20:00
1
2
5
8
0
3
6
9
4
7
Off
--/-
blue
P
+
-
OK
-- : --
P
-
TV
MENU
-
?
AV
08 : 22
A
B
AV
When the set has switched itself on automatically,
you must press any key you choose on the remote
control, otherwise the set will return to standby
mode after about 10 min. This is a safety precaution
to ensure that the television does not stay on if
you are not at home.
696+08B-GB
2
0
0
0
If you press the yellow key, the text in the second line
is displayed on a yellow background.
MENU
TV
?
return
picture
Help
3. Enter the switch-off time
(Example: 23.30 hr)
-
Time settings
Now press the or the key to switch on the function.
Switch-on time:
20:00
1
2
5
8
0
3
6
9
Enter the desired switch-off time with the numeric
keys. The function is activated after input of the last
digit.
4
7
yellow
Switch-off time: 23:30
--/-
P
+
-
OK
Reminder time
Time of day:
-- : --
08 : 22
P
-
-
The switch-on/switch-off times can be deleted with
TV
-
MENU
the
keys (function OFF).
?
AV
A
B
AV
696+08C-GB
3
2 3
0
24
Switch-on/off and
reminder time
8. Time settings
Press this key on the remote
control....
The screen displays
Explanation
MENU
TV
?
return
picture
Help
If you press the white key, the text in the third line is
displayed on a white background.
4. Enter the reminder time
(Example: 21.45 hr)
Time settings
Enter the desired reminder time with the numeric
keys. The function is activated after input of the last
digit.
Switch-on time:
20:00
1
2
5
8
0
3
6
9
4
7
white
Switch-off time: 23:30
--/-
From the standby mode, the TV set will switch itself on
at 20.00 hr, remind you of the telephone call you wish
to make at 21.45 hr, and switch back to standby mode
at 23.30 hours.
P
+
-
OK
Reminder time
Time of day:
21:45
P
-
TV
MENU
?
AV
08 : 22
2
1
4
5
A
B
AV
The reminder time can be deleted with the C key.
696+08D-GB
At the programmed time, a box with the text „Hallo“ is
displayed on the screen if the TV set is switched on.
OK
TV
This box disappears if you press the
or
key or
OK
switch to a different programme position.
or
TV
Hallo
MENU
TV
?
return
picture
Help
If you switch to a programme position in which teletext
has been stored, the current time automatically
5. Enter the time manually
(Example: 14.24 hr)
Time settings
appears in this menu .
.
Switch-on time:
Switch-off time:
Reminder time
Time of day:
Off
1
2
5
8
0
3
6
9
To set the clock manually, simply enter the time with
four digits.
4
7
green
Off
--/-
P
+
-
OK
-- : --
-- : --
P
-
TV
MENU
?
AV
A
B
1 4
2
4
AV
696+08E-GB
6. Switch to standby mode
TV picture
25
Switching on
8.1 Childlock
Your TV set can be protected against unauthorized use. It is possible to prevent any use of the television at all or to permit viewing of up to
five specific programmes. Consequently, the childlock can be set to prevent a child from seeing violent films, yet still provide access to
children’s programmess on selected channels. Access to such permitted programmes can be provided in general or within a specified
period of time.
Example:
The children shall only be allowed to watch programmes on the programme positions 01, 02 and 05 from 14.00 to 18.00 hr. Access to all
other programme positions shall be excluded.
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help
1. Call the „Timer/childlock“
menu
Timer/childlock
Time settings
1
2
5
8
0
3
6
9
4
7
MENU
Childlock
--/-
P
+
-
OK
Timer recording
Basic setting of MVS
P
-
green
TV
MENU
?
A
B
AV
696+08F-GB
-
MENU
TV
?
return
picture
Help
The childlock can be switched on and off with the
keys.
2. Call the „Childlock“
submenu and switch on
the childlock
Childlock
If you set the childlock to „ON“, you must also enter a
4-digit personal code number.
Childlock. . . . .
On
1
2
5
8
0
3
6
9
4
7
The TV set can now still be switched on, but programmes
will not be shown on the screen. Instead the „Childlock“
menu will be displayed with the cursor on the „Enter
code“ line.
yellow
blue
P-e-rmi-tt-ed-p-rog-r-am-m-es:
--/-
P
+
-
OK
- - - -
Enter code . . . . :
Begin viewing . :
End viewing . . . :
P
-
TV
MENU
The childlock can be turned off again by entering the
4-digit personal code number.
AV
- -
- -
:
:
- -
- -
?
A
B
AV
-
The TV is automatically switched to standby mode after
approx. 10 minutes if it has not been switched off
manually in the meantime.
6 9 6 + 0 8 G 1 - G B
MENU
TV
?
return
picture
Help
A maximum of 5 programme positions can be entered
to which access is permitted.
3. Select and store permitted
programmes
Childlock
These programme positions are entered with the
numeric keys; all entries can be erased with the C key.
yellow
Childlock. . . . .
On
1
2
5
8
0
3
6
9
4
7
Back to the example:
Permitted programmes:
01 02 05 -- --
--/-
Enter the programme positions which are to be
accessible. In this example, the programme positions
01, 02 and 05 have been entered.
1
4
7
2
5
8
3
6
9
P
+
-
OK
- - - -
Enter code . . . . :
Begin viewing . :
End viewing . . . :
P
-
TV
MENU
AV
- -
- -
:
:
- -
- -
?
Before continuing with the next programming steps,
the permitted programme positions entered above
must be stored; otherwise the entries will be lost.
A
B
AV
6 9 6 + 0 8 H 1 - G B
store ?
OK
0
OK
26
Switching on
8.1 Childlock
Press this key on the remote
control....
The screen displays
Explanation
MENU
TV
?
return
picture
Help
Enter your personal 4-digit code at this point.
4. Enter your personal code
The digits are entered with the numeric keys. The
entered code number is NOT displayed!
Childlock
Childlock. . . . .
Off
1
2
5
8
0
3
6
9
Ask your local dealer for help if you have forgotten
your personal code number.
white
4
7
Permitted programmes:
01 02 05 -- --
--/-
P
+
-
OK
1
4
7
2
5
8
0
3
6
9
Enter code . . . . :
Begin viewing . :
End viewing . . . :
- - - -
P
-
TV
MENU
AV
- -
- -
:
:
- -
- -
?
A
B
AV
696+08I-GB
MENU
TV
?
return
picture
Help
Here you can enter the times between which viewing
of the permitted programmes is allowed.
5. Enter the beginning and
end of the viewing period
Childlock
The TV is not automatically switched on at the begin-
ning of this period; it is, however, automatically swit-
ched off at the end of it.
Childlock. . . . .
Off
1
2
5
8
0
3
6
9
4
7
Permitted programmes:
01 02 05 -- --
--/-
green
1 4 0 0
If no permitted programmes have been entered all TV
transmissions within this period can be viewed.
P
+
-
OK
Enter code . . . . :
- - - -
14 : 00
18 : 00
P
-
TV
MENU
AV
Begin viewing . :
End viewing . . . :
?
red
A
B
1 8 0 0
AV
696+08J-GB
The childlock is activated when the set is switched off
with the
key or with the ON/OFF key.
6. Activate the childlock
Switching off
8.1 Childlock
MENU
TV
?
return
picture
Help
Entry of the personal code number switches off the
childlock and the selected programme is displayed on
the screen.
Call the TV menu and enter
your personal code
Childlock
Childlock. . . . .
Off
1
2
5
8
0
3
6
9
4
7
Ask your local dealer for help if you have forgotten
your personal code number.
Permitted programmes:
01 02 05 -- --
--/-
1
4
7
2
5
8
0
3
6
9
P
+
-
OK
Enter code . . . . :
Begin viewing . :
End viewing . . . :
- - - -
P
-
TV
MENU
AV
- -
- -
:
:
- -
- -
?
A
B
AV
696+08I-GB
27
8.2 Recording with the timer
The menu "Timer recording" is intended primarily for recording Pay-TV programmes (e.g. Premiere). When using a Metz video recorder
with „Data Logic“ you can also record SAT programmes* with this menu. For this purpose, the video recorder must be connected to the
EURO 2 socket.
*only if a SAT upgrade kit is fitted
8 timers can be programmed up to 2 months in advance.
Example: A VHS video recorder with Data Logic is connected to the EURO 2 socket of the TV, while a Pay-TV decoder (e.g. Premiere) is
connected to the EURO 1 socket. You now wish to record a film running on a Pay TV channel.
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help
If no timers have been programmed before, the table in
the menu is empty. If you have previously programmed
timer recordings, these will be displayed in the table.
1. Call the „Timer recording“
menu
Timer recording
Time of day
Date
TV / R
VPS
Prog
The current time of day and the current date are nee-
ded for programming in the timer menu. The time is
normally obtained from the Hi Text function and the
date from the VPS signal. Note that some stations do
not transmit VPS signals and/or Hi Text.
-/--
- -
AV
—
—
—
—
—
—
—
—
—
—
:
.
.
.
.
.
.
.
.
.
.
:
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
MENU
green
white
If the time and/or date are not detected automati-
cally, you must enter them manually.
Timer recordings are not possible if the childlock
is switched on.
enter date
6 0 0 + 0 8 K - G B
04.01
14:20
The month, the day, the hours and the minutes must
each be entered in the form of two digits, e.g. 01.09
for September 1 and 09:00 for 9 AM.
MENU
TV
?
return
picture
Help
2. Enter the date and time of
the film to be recorded
(see example)
If you make a mistake when entering the date and
time, you can delete the entry in the current column or
the entire line by pressing the C key. The entire line
can be deleted only if the key symbols at the top of the
menu are displayed in colour.
Timer recording
Time of day
Date
TV / R
-/--
VPS
Prog
AV
Premiere
—
22:10
07.01
20:15
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
26
1
4
7
2
5
8
0
3
6
9
:
:
:
:
:
:
:
:
:
.
.
.
.
.
.
.
.
.
:
:
:
:
:
:
:
:
:
—
—
In the column "VTR", which can be selected only if a
video recorder with "Data Logic" is connected, one of
the following settings can be selected with key A:
—
—
—
—
—
—
No timer data are transferred to the video recorder.
The video recorder must be programmed manually.
—
store ?
enter date
04.01
14:2
LV 1) If a "Data Logic" video recorder is connected.
6 0 0 + 0 8 L - G B
OK
1)
A "Data Logic" video recorder will not function automati-
cally without "LV" and must be programmed manually.
MENU
TV
?
return
picture
Help
3. Store the programmed data
and return to the TV picture
or standby mode
The recording can be aborted at any time by pres-
AV
OK
TV
sing the keys
,
and
sequentially, in
Timer recording
this order, or by pressing the C key with the timer
menu displayed.
Time of day
Date
TV / R
VPS
Prog
-/--
AV
Premiere
—
22:10
07.01
20:15
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
26
--
:
:
:
:
:
:
:
:
:
.
.
.
.
.
.
.
.
.
:
:
:
:
:
:
:
:
:
—
OK
This does not apply to video recorders with data
transfer!
—
—
—
—
The same data must also be entered on the AV
programme position of the video recorder or on a
programme position where the video recorder
does not receive a station.
—
or
TV
—
—
enter date
6 0 0 + 0 8 M - G B
04.01
14:20
28
9. Connecting headphones
Headphones can be connected to the TV by way of the connecting socket underneath the fascia cover at the front. The socket will only
accept headphones with a 3.5 mm jack plug.
We recommend the use of headphones with an impedance of at least 32 Ohms. Headphones of a lower impedance (down to approx.8
Ohms) will impair the sound quality.
The headphones volume can be stored as a standard value. The headphones and the TV speakers can be used together.
In the event of 2-channel sound transmissions it is possible to listen to either channel 1 or 2 on the headphones, irrespective of the chan-
nel set for the TV speakers.
Volume
9. Headphones
Press this key on the remote
The screen displays
Explanation
control....
It is advisable to switch off the TV speakers with the
key when adjusting the volume for the headphones.
1. Switch off the TV speakers
and adjust the headphones
volume
Press the yellow key to display the bar for the head-
phones volume.
-
Adjust the volume with the
keys.
yellow
Volume headphones
-
65
OK
change
-
696+BY GB
MENU
TV
?
return
picture
Help
The standard value for the headphones volume can
only be stored by way of the TV menu.
2. Store the headphones volu-
me as a standard value
Audio standard values
All standard values can be stored in the „Audio stan-
dard values“ submenu.
Volume
1
2
5
8
0
3
6
9
48
4
7
MENU
Treble
--/-
The volume has already been adjusted (see step 1).
-
-
-
+
+
+
23
42
00
36
P
+
-
OK
Bass
OK
P
-
It is now only necessary to press the
the headphones volume.
key to store
TV
yellow
MENU
AV
Balance
?
A
B
AV
Volume headphones
OK
696+04B-GB
store ?
OK
3. Return to TV picture
TV
TV picture
With two-channel sound transmissions it is possible to
select either channel 1 or channel 2.
Sound mode selection for
headphones
If headphones are connected, it is possible to listen,
for example, to the English sound track on the spea-
kers (channel 1) and to the other language on the
headphones (channel 2).
Sound-mode headphones
-
yellow
yellow
Mono / stereo / Chann.1 / Chann.2
B 1 5 - G B
OK
change
This setting can also be called with the sound mute
active by pressing the yellow key. The desired channel
-
can then be selected with the
keys.
29
Basic functions
10. Hi Text
Hi Text permits broadcasting stations to improve the display of information and graphics. In the past, there were only eight colours
available; with Hi Text, there are 4096 possibilities.
Furthermore, the introduction of so-called pixel graphics makes it possible to present the information pictorially. The broadcasting stations
are currently in the process of adopting these innovations.
We have implemented Hi Text in your TV set in such a manner that you can switch it on and off as desired. Pressing the -/-- key switches
from Hi Text to Megatext or vice versa.
The currently selected mode („Megatext“ or „Hi Text“) is displayed at the top of each page.
Press this key on the remote
The screen displays
Explanation
control....
MENU
OK
?
Help
TV-picture
View page
The Hi Text file displays all the subjects available on
specific programme position and the chapters belonging
to the currently selected subject.
a
1. Call Hi Text
TOP
Hi Text
Börse
Wetter
ARD-Programm
Football
The range of subjects and chapters depend on the
transmitting station and can therefore be completely
different in each programme position.
Bundesligen
Hinweise
VT-Redaktion
VT-Zentrale
TV
Fußball
Sport
Aktuelles
Index
Übersicht
Inhalt
Chapter
on subject
For some stations, for example, only numbers, rather
than the header lines, appear in the Hi Text file.
Subj.
6 9 6 + 1 0 A - G B
Each time the blue key is pressed, the next subject is
selected and the corresponding file card is raised. Pro-
longed depression of the blue key raises all of the sub-
jects sequentially.
MENU
OK
?
Help
TV-picture
View page
2. Select a subject
TOP
Hi Text
Börse
Wetter
ARD-Programm
Football
Bundesligen
Fußball
Sport
Aktuelles
Press the right side of the key to step backwards
through the subjects, or the left side of the key to step
forwards.
übermorgen
jetzt im TV
morgen
blue
heute
Inhalt
Chapter
on subject
Übersicht
Subj.
The displayed choice of chapters is adapted to the
currently selected subject.
6 9 6 + 1 0 B - G B
MENU
OK
?
TV-picture
View page
Help
Each time the yellow key is pressed, the next chapter
is selected and the corresponding file card is raised.
3. Select a chapter
TOP
Hi Text
Börse
Wetter
Press the right side of the key to step backwards, or
the left side of the key to step forwards.
ARD-Programm
Football
Bundesligen
Fußball
Sport
Aktuelles
übermorgen
jetzt im TV
morgen
heute
Prolonged depression of the yellow key raises all the
chapters sequentially.
yellow
Inhalt
Übersicht
Subj.
Chapter
on subject
6 9 6 + 1 0 C - G B
The first page of the selected subject and chapter is
displayed.
4. Open the first page
of the chapter
ARD heute . . . . . . . . . . . . . .301-319
ARD morge.n. . . . . . . . . . . . .321-339
ARD-Wochenübersich.t. . . . . . . . 340
TV-Guide: Zeitschema. . . . . . . . . 350
TV-Guide: Spartenschema . . . . . 375
File symbols with arrows in the bottom line indicate
that the corresponding coloured keys will activate sub-
ject-by-subject, chapter-by-chapter or page-by-page
leafing.
ARD: Jetzt
im Programm
. . . . . 333
OK
The blue text window shows the name of the currently
selected subject, while the yellow shows the name of
the currently selected chapter.
Untertitel-
Vorschau
. . . . . 398
ARD
/
ZDF
TV-Guide
696+10D-D
Inhalt
30
Basic functions
10. Hi Text
Press this key on the remote
control....
The screen displays
Explanation
MENU
?
Kartei
AV
nächste
Marke:
neu
Hilfe
This function enables you to run through the individual
pages. Just as in a book, you can leaf forwards or
backwards from the displayed page.
301 ARD/ZDF So. 5.01.97 13:45:00
5. Page-by-page paging
ARD
Sonntag, 5. Januar 1997
06.00
09.00
09.03
09.45
10.00
10.03
10.45
11.00
11.03
ARD-Morgenmagazin
Press the right side of the key to step backwards, and
the left side of the key to step forwards.
Tagesschau
Dallas
Tele-Gym
Tagesschau
auslandsjournal
ZDF-Info Gesundheit
Tagesschau
Cappuccino Melange
Fernsehfilm, 1993 . . . . . . .
Umschau
307
313
white
12.35
12.55
13.00
13.05
Presseschau
Tagesschau
ARD-Mittagsmagazin . . . .
bis 13.45 Uhr
Inhalt 300 Nachmittag auf 302
ARD heute
Inhalt
696+10E-D
MENU
?
Kartei
AV
nächste
Marke:
neu
Hilfe
This function enables you to run through the individual
chapters.
321 ARD/ZDF So. 5.01.97 14:19:00
6. Chapter-by-chapter paging
ARD
Each time you press the yellow key, the first page of
the next or previous chapter is opened.
Montag, 6. Januar 1997
ARD-Morgenmagazin
05.30
09.00
09.03
09.45
Tagesschau
ML Mona Lisa
Kneippen für die
Gesundheit
Press the right side of the key to step backwards, and
the left side of the key to step forwards.
10.00
10.03
10.45
Tagesschau
Weltspiegel
Fall auf Fall - . . . . . . . . .
Jedem sein Recht
Tagesschau / Börse
Salomonberries
Spielfilm, D 1991
Umschau . . . . . . . . . . . .
Presseschau
326
326
11.00
11.03
12.35
12.55
13.00
yellow
Tagesschau
Inhalt 300 Nachmittag auf 322
ARD morgen Inhalt
696+10F-D
MENU
?
Kartei
AV
nächste
Marke:
neu
Hilfe
Each time you press the blue key, the first page of the
next or previous subject is opened. In most cases, this
will be an index page.
400 ARD/ZDF So. 5.01.97 14:19:00
7. Subject-by-subject paging
W E T T E R
Ü B E R S I C H T
Press the right side of the key to step backwards, and
press the left side of the key to step forwards.
Deutschland
Wettervorhersage
401
402
403
Früh- bzw. Mittagstemperaturen
Aussichten für die nächsten Tage
Europäisches Reisewetter
Nord- und Nordwesteuropa
Mittel- und Südosteuropa
Süd- und Südwesteuropa
Wassertemperaturen
404
405
406
407
blue
Temperaturen international . .
.
.
.
.
.
.
408
Quelle: METEO CONSULT / DWD
Wetter Inhalt
696+10G-D
31
Multiple pages
10. Hi Text
Press this key on the remote
control....
The screen displays
Explanation
-
-
01 02 03 04 05
AV
nächste
Marke:
neu
Multiple pages are indicated by a dark bar with the
subpage numbers on the left-hand side of the display-
ed page.
589 ARD/ZDF So 5.01.97 15:34:00
1. Recognizing multiple pages
1/8
computer
Hallo und herzlich willkommen . . .
The bright numbers indicate the number of subpages
contained in this multiple page. The number of sub-
pages is transmitted by the stations at intervals of 20
seconds. Consequently, it may take some time until all
subpage numbers are displayed.
Auf den folgenden Seiten informieren
wir Sie über unseren Service rund um
das erste regelmäßige Online-Magazin
im deutschen Fernsehen.
Technische Mindestausstattung,
Online-Kosten . . . . . . . . . . . . . . . . . . . 2/9
Vollständige Liste aller
Internetcafes . . . . . . . . . . . . . . . . . . . . 3/9
netNite im Internet
(http://www.zdfmsn.de) . . . . . . . . . . . . 4/9
Zuschauer-Postbox . . . . . . . . . . . . . . . 5/9
netNite Chat. . . . . . . . . . . . . . . . . . . . . 6/9
netNite Weiterbildung . . . . . . . . . . . . . 7/9
Nächste Sendung . . . . . . . . . . . . . . . . 8/9
If there are more than 5 subpages, the cursor (white
bar) can be moved to the right with the key to dis-
play the next group of subpage numbers (for example 01
to 11).
ZDF: netNite
Service
-
das Online - Magazin >>
Computer
696+10H-D
Some stations do not provide multiple page identifica-
tion; in this case, the subpages are displayed sequen-
tially. To stop a page for reading, one of the A or B
function keys must be programmed with the „Stop
page“ function in Hi Text mode. Renewed depression
of the „Stop page“ function key advances to another
subpage (the one the station is currently transmitting).
-
-
-
<< 01 02 03 04 05 06 07 08 09 10 11 >>
Use the
keys to move the cursor (coloured bar)
589 ARD/ZDF So 5.01.97 15:40:00
2. Selecting subpages
2/8
upwards and downwards through the page numbers.
The page number highlighted by the cursor can be
called directly with the
computer
Technische Mindestausstattung, Online
Kosten
OK
key.
Computer mit 486 Prozessor
mindestens 8 MB Speicher (16 MB
ideal)
mindestens 500 MB Festplatte
Super VGA-Grafikkarte
mindestens 15" Farb-Monitor
Soundkarte mit Aktivboxen
-
Zu veranschlagende Kosten:
ca. 1500 - 2000 DM
Surf-Kosten (eine Stunde T-Online)
Telefongebühren (ab 21.00Uhr)
Online-Zeittakt und Internet-
Gebühr . . . . . . . . . . . . . . . . . . . .
1,92 DM
4,20 DM
ZDF: netNite
Service
-
das Online - Magazin >>
Computer
696+10I-D
Page selection by cursor
10. Hi Text
The cursor (coloured bar) can be moved up and down
ARD heute . . . . . . . . . . . . . .301-319
ARD morge.n. . . . . . . . . . . . .321-339
ARD-Wochenübersich.t. . . . . . . . 340
TV-Guide: Zeitschema. . . . . . . . . 350
TV-Guide: Spartenschema . . . . . 375
P
-
P
+
with the
and
keys. The page number on
which the cursor is located can be called directly by
OK
P
-
pressing the
key.
P
+
ARD: Jetzt
im Programm
. . . . . 333
Untertitel-
Vorschau
. . . . . 398
OK
ARD
/
ZDF
TV-Guide
696+10D-D
Inhalt
32
Direct page selection
10. Hi Text
Press this key on the remote
control....
The screen displays
Explanation
-
-
01 02 03 04 05
AV
nächste
Marke:
neu
After depression of the first numeric key, the num-
ber of this key, followed by two hyphens, appears at
the top left of the screen. Enter the complete 3-digit
number. A green line with the text „Wait for page ...“
is displayed at the top of the screen after the last
digit has been entered. A red line with the message
„Page is not transmitted“ is displayed if the entered
page number does not exist. Otherwise the TV searches
for the specified page and displays it as soon as it is
located.
1. Enter the page number
e.g. page 589
589 ARD/ZDF So 5.01.97 15:34:00
1/8
computer
Hallo und herzlich willkommen . . .
Auf den folgenden Seiten informieren
wir Sie über unseren Service rund um
das erste regelmäßige Online-Magazin
im deutschen Fernsehen.
Technische Mindestausstattung,
Online-Kosten . . . . . . . . . . . . . . . . . . . 2/9
Vollständige Liste aller
5 8 9
Internetcafes . . . . . . . . . . . . . . . . . . . . 3/9
netNite im Internet
(http://www.zdfmsn.de) . . . . . . . . . . . . 4/9
Zuschauer-Postbox . . . . . . . . . . . . . . . 5/9
netNite Chat. . . . . . . . . . . . . . . . . . . . . 6/9
netNite Weiterbildung . . . . . . . . . . . . . 7/9
Nächste Sendung . . . . . . . . . . . . . . . . 8/9
ZDF: netNite
Service
-
das Online - Magazin >>
Computer
696+10H-D
Return to last index page
10. Hi Text
Press the 0 key to return to the last index page.
Return to last index page
ARD heute . . . . . . . . . . . . . .301-319
ARD morge.n. . . . . . . . . . . . .321-339
ARD-Wochenübersich.t. . . . . . . . 340
TV-Guide: Zeitschema. . . . . . . . . 350
TV-Guide: Spartenschema . . . . . 375
The adjoining picture shows the index page of the ARD
channel as an example.
ARD: Jetzt
im Programm
. . . . . 333
0
Untertitel-
Vorschau
. . . . . 398
ARD
/
ZDF
TV-Guide
696+10D-D
Inhalt
Topical or news-flash
pages
10. Hi Text
MENU
?
Kartei
AV
nächste
Marke:
neu
Some stations transmit Teletext pages with news flashes,
general information, football results, etc.
Hilfe
111 ARD/ZDF So. 5.12.97 14:19:00
Suppressing news-flash pages
Once you have selected such a page and hidden it by
TV
pressing the
key, the page will be displayed again
white
whenever it is updated by the TV station.
LETZTE MELDUNG: Eurocard bestätigt doppelte
Abbuchungen von Auslandsumsätzen im
November.
Nachrichten - Übersichten .
Wetter Inhalt
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
121
.
.
.
.
.
.112 – 115
696+12A-D
TV
33
Doubling the font size
10. Hi Text
Press this key on the remote
control....
The screen displays
Explanation
MENU
?
Kartei
AV
nächste
Marke:
neu
Hilfe
When the B* key is pressed for the first time, the upper
part of the selected page is displayed with the font size
doubled.
301 ARD/ZDF So. 5.01.97 13:45:00
1. Select double font size,
e.g. press the B* key
ARD
Sonntag, 5. Januar 1997
06.00
09.00
09.03
09.45
10.00
10.03
10.45
11.00
11.03
ARD-Morgenmagazin
You can scroll slowly through the page by holding
down the key.
Tagesschau
Dallas
Tele-Gym
Tagesschau
auslandsjournal
*
ZDF-Info Gesundheit
Tagesschau
B
A
* The B key was programmed in the factory for this
function, but this programming can be changed (see
Section „Equipment configuration - Assigning the
function keys“).
or
Cappuccino Melange
Fernsehfilm, 1993 . . . . . . .
Umschau
307
313
12.35
12.55
13.00
13.05
Presseschau
Tagesschau
C
ARD-Mittagsmagazin . . . .
bis 13.45 Uhr
Inhalt 300 Nachmittag auf 302
ARD heute
Inhalt
696+10E-D
When the B* key is pressed for the second time, the
displayed page is scrolled upwards.
MENU
AV
?
Kartei
Marke:
neu
nächste
Hilfe
2. Scroll the page upwards,
e.g. press the B* key
301 ARD/ZDF So. 5.01.97 13:45:00
ARD
*
B
A
Sonntag, 5. Januar 1997
ARD-Morgenmagazin
or
06.00
09.00
09.03
09.45
10.00
10.03
Tagesschau
Dallas
C
Tele-Gym
Tagesschau
auslandsjournal
When the B* key is pressed for the third time, the dis-
played page is scrolled further, and so on.
3. Scroll the page further,
e.g. press the B* key
Sonntag, 5. Januar 1997
06.00
09.00
09.03
09.45
10.00
10.03
10.45
11.00
11.03
ARD-Morgenmagazin
Tagesschau
Dallas
Tele-Gym
*
B
A
Tagesschau
or
auslandsjournal
ZDF-Info Gesundheit
Tagesschau
C
Cappuccino Melange
Fernsehfilm, 1993 . . . . . . .
Umschau
307
12.35
12.55
13.00
Presseschau
Tagesschau
4. Return to normal font size
10.00
10.03
10.45
11.00
11.03
Tagesschau
Press the B* key for a fifth time to return to normal font
size.
auslandsjournal
ZDF-Info Gesundheit
Tagesschau
Cappuccino Melange
Fernsehfilm, 1993 . . . . . . .
Umschau
307
313
12.35
12.55
13.00
13.05
Presseschau
*
B
A
Tagesschau
or
ARD-Mittagsmagazin . . . .
bis 13.45 Uhr
C
Inhalt 300 Nachmittag auf 302
ARD heute
Inhalt
* Depending on the assignment of the
function keys. The factory setting is B.
34
Setting marks
10. Hi Text
There will be certain Hi Text pages, e.g. stock market, news, weather forecast, etc., that you willl want to read repeatedly. We have pro-
grammed a way of making it easier to read such pages: Hi Text pages can be flagged with the aid of marks (similar to tabs in a file).
We provide a total of 100 marks. Up to 10 marks may be assigned to each programme position, as long as the total number of
marks assigned does not exceed 100.
You can set the marks on any desired pages and you can delete them again when they are no longer needed. If marks are set on a page,
you can page from one to another by pressing the green key when HiText is active.
Press this key on the remote
The screen displays
Explanation
control....
MENU
?
Kartei
AV
nächste
Marke:
neu
Hilfe
1. Call the desired page
e.g. page 400
400 ARD/ZDF So. 5.01.97 14:19:00
W E T T E R
Ü B E R S I C H T
Deutschland
Wettervorhersage
401
402
403
Früh- bzw. Mittagstemperaturen
Aussichten für die nächsten Tage
4
0 0
Europäisches Reisewetter
Nord- und Nordwesteuropa
Mittel- und Südosteuropa
Süd- und Südwesteuropa
Wassertemperaturen
404
405
406
407
Temperaturen international . .
.
.
.
.
.
.
408
Quelle: METEO CONSULT / DWD
Wetter Inhalt
696+10G-D
MENU
?
Kartei
AV
nächste
Marke:
entf.
Hilfe
If marks have not yet been set in this programme
position, then press the key to set the 1st mark.
MARKE 1 400 ARD/ZDF So. 5.01.97 14:19:00
2. Set the first mark
W E T T E R
„MARK 1“ is displayed at the top lefthand corner of the
screen.
Ü B E R S I C H T
Deutschland
Wettervorhersage
401
red
Früh- bzw. Mittagstemperaturen
Aussichten für die nächsten Tage
402
403
Europäisches Reisewetter
Nord- und Nordwesteuropa
Mittel- und Südosteuropa
Süd- und Südwesteuropa
Wassertemperaturen
404
405
406
407
Temperaturen international . .
.
.
.
.
.
.
408
Quelle: METEO CONSULT / DWD
Wetter
Inhalt
696+10J-D
-
-
01 02 03 04 05
AV
Marke:
entf.
nächste
In the ARD channel, for example, page 589 is a multiple
page.
3. Select the next page
e.g. 589
MARKE 2 589 ARD/ZDF So 5.01.97 15:34:00
1/8
computer
On multiple pages, marks are always set on the main
page.
Hallo und herzlich willkommen . . .
Auf den folgenden Seiten informieren
wir Sie über unseren Service rund um
das erste regelmäßige Online-Magazin
im deutschen Fernsehen.
Technische Mindestausstattung,
Online-Kosten . . . . . . . . . . . . . . . . . . . 2/9
Vollständige Liste aller
Internetcafes . . . . . . . . . . . . . . . . . . . . 3/9
netNite im Internet
(http://www.zdfmsn.de) . . . . . . . . . . . . 4/9
Zuschauer-Postbox . . . . . . . . . . . . . . . 5/9
netNite Chat. . . . . . . . . . . . . . . . . . . . . 6/9
netNite Weiterbildung . . . . . . . . . . . . . 7/9
Nächste Sendung . . . . . . . . . . . . . . . . 8/9
5
8 9
ZDF: netNite
Service
-
das Online - Magazin >>
Computer
696+10K-D
35
Setting marks
10. Hi Text
Press this key on the remote
control....
The screen displays
Explanation
-
-
01 02 03 04 05
AV
nächste
Marke:
entf.
When the required page is displayed (in our example
page 589), press the red key again to set the second
mark.
MARKE 2 589 ARD/ZDF So 5.01.97 15:34:00
4. Set the second mark
1/8
computer
Hallo und herzlich willkommen . . .
Auf den folgenden Seiten informieren
wir Sie über unseren Service rund um
das erste regelmäßige Online-Magazin
im deutschen Fernsehen.
„MARK 2“ is now displayed at the top left-hand corner
of the screen.
red
Technische Mindestausstattung,
Online-Kosten . . . . . . . . . . . . . . . . . . . 2/9
Vollständige Liste aller
Internetcafes . . . . . . . . . . . . . . . . . . . . 3/9
netNite im Internet
(http://www.zdfmsn.de) . . . . . . . . . . . . 4/9
Zuschauer-Postbox . . . . . . . . . . . . . . . 5/9
netNite Chat. . . . . . . . . . . . . . . . . . . . . 6/9
netNite Weiterbildung . . . . . . . . . . . . . 7/9
Nächste Sendung . . . . . . . . . . . . . . . . 8/9
ZDF: netNite
Service
-
das Online - Magazin >>
Computer
696+10K-D
MENU
?
Kartei
AV
nächste
Marke:
entf.
Hilfe
10 marks can be set on each programme position, as
long as the total number of marks assigned does not
exceed 100. See steps 1 - 4.
If all of the 100 available marks have been used,
the red dot in the title line of the menu changes to
grey.
5. Set further marks
e.g. page 500
MARKE 3 500 ARD/ZDF So. 5.01.97 13:47:00
SERVICE
. . . . . . . . . . . . . . . . . . .
Kultur
501/502
530
. . . .
Ratgeber: ARD/ZDF-Infos
. . . . . . . .
Lotto/Gewinnzahlen
540
5
0
0
. . . . . . . . . . . . .
Reise/Verkehr
halbstarl!! - Jugendprogramm
. . . . . . .
550
570
Videotext-Preisrätsel
. . . . . . . . . . . . . . . .
575-577
580
Computer
red
A la carte . . . . . . . . . . . . . . . .
Weltzeituhr . . . . . . . . . . . . . . .
590
599
Service
696+10M-D
Inhalt
6. Return to TV picture
TV
36
Infotext (Mark by mark paging)
10. Hi Text
The basic idea of Infotext is that you can quickly retrieve and read pages which have previously been marked as described on the two pre-
vious pages of this manual. Once marks have been set, you can page through the related pages at any time by pressing a programmed
function key
Once the marks have been set, you can step through all of the marked pages from the current TV programme by pressing a programmed
key (key C is programmed in the factory for this purpose).
Press this key on the remote
The screen displays
Explanation
control....
MENU
?
Kartei
AV
nächste
Marke:
neu
Hilfe
After the C key has been pressed, a panel with „Mark
1“ will be displayed.
1. From TV picture to
the first mark
400 ARD/ZDF So. 5.01.97 14:19:00
W E T T E R
On programme positions without a mark, a white field
will be displayed with the text „No mark“.
Ü B E R S I C H T
Deutschland
Wettervorhersage
401
402
403
Früh- bzw. Mittagstemperaturen
Aussichten für die nächsten Tage
B
A
Europäisches Reisewetter
Nord- und Nordwesteuropa
Mittel- und Südosteuropa
Süd- und Südwesteuropa
Wassertemperaturen
404
405
406
407
or
*
Temperaturen international . .
.
.
.
.
.
.
408
C
Quelle: METEO CONSULT / DWD
Wetter
Inhalt
696+10G-D
-
-
01 02 03 04 05
AV
Marke:
entf.
nächste
Each time the green key is pressed, you advance to
the next mark. In this manner you can run through all
pages on which marks are set.
2. Step forward to the
next mark
MARKE 2 589 ARD/ZDF So 5.01.97 15:34:00
1/8
computer
Hallo und herzlich willkommen . . .
Auf den folgenden Seiten informieren
wir Sie über unseren Service rund um
das erste regelmäßige Online-Magazin
im deutschen Fernsehen.
Technische Mindestausstattung,
Online-Kosten . . . . . . . . . . . . . . . . . . . 2/9
Vollständige Liste aller
Internetcafes . . . . . . . . . . . . . . . . . . . . 3/9
netNite im Internet
(http://www.zdfmsn.de) . . . . . . . . . . . . 4/9
Zuschauer-Postbox . . . . . . . . . . . . . . . 5/9
netNite Chat. . . . . . . . . . . . . . . . . . . . . 6/9
netNite Weiterbildung . . . . . . . . . . . . . 7/9
Nächste Sendung . . . . . . . . . . . . . . . . 8/9
green
ZDF: netNite
Service
-
das Online - Magazin >>
Computer
696+10K-D
The C key will return you to the TV picture after having
run through all marks.
3. Return to TV picture
TV
Press the
key to return directly to the TV picture
without having to page through all the marks.
TV
* Depending on how the function keys are programmed.
The factory setting is C.
37
Erasing marks
10. Hi Text
Press this key on the remote
control....
The screen displays
Explanation
MENU
?
Kartei
AV
nächste
Marke:
entf.
Hilfe
Press the C key to call the page where the mark is to
be erased.
1. Call the desired page
e.g. page 400
MARKE 1 400 ARD/ZDF So. 5.01.97 14:19:00
W E T T E R
Ü B E R S I C H T
* Depending on how the function keys are program-
med. The factory setting is C.
Deutschland
Wettervorhersage
401
402
403
Früh- bzw. Mittagstemperaturen
Aussichten für die nächsten Tage
or
B
A
Europäisches Reisewetter
Nord- und Nordwesteuropa
Mittel- und Südosteuropa
Süd- und Südwesteuropa
Wassertemperaturen
404
405
406
407
*
C
Temperaturen international . .
.
.
.
.
.
.
408
Quelle: METEO CONSULT / DWD
Wetter
Inhalt
696+10J-D
MENU
?
Kartei
AV
Marke:
neu
nächste
Hilfe
Erasure of the mark on the current text page changes
the sequence of the remaining marks.
400 ARD/ZDF So. 5.01.97 14:19:00
2. Erase the mark
W E T T E R
Example:
Ü B E R S I C H T
3 marks have been set in the current programme position:
- Mark 1 on text page 400
Deutschland
Wettervorhersage
401
402
403
Früh- bzw. Mittagstemperaturen
Aussichten für die nächsten Tage
red
- Mark 2 on text page 500
Europäisches Reisewetter
Nord- und Nordwesteuropa
Mittel- und Südosteuropa
Süd- und Südwesteuropa
Wassertemperaturen
404
405
406
407
- Mark 3 on text page 589
Temperaturen international . .
.
.
.
.
.
.
408
You now erase the mark 1 on text page 400.
Quelle: METEO CONSULT / DWD
Wetter Inhalt
The sequence of the remaining marks is immediately
re-arranged and is now:
696+10G-D
- Mark 1 on text page 500
- Mark 2 on text page 589
3. Return to TV picture
TV
38
Subtitles
10. Hi Text
This TV enables you to display programme subtitles automatically.
For this purpose one of the three A, B or C function keys must be programmed on the remote control handset. Please refer to Section
„Equipment configuration - Assigning the function keys“ for programming. The subtitles will only be displayed automatically after a
function key has been programmed accordingly.
Example: You wish to watch the news with its subtitles. Program a function key with the „Subtitle“ function.
Press this key on the remote
The screen displays
Explanation
control....
The teletext transmitted by the station is superim-
posed on the picture at the bottom of the screen.
1. Display of subtitles in the
current programme
The subtitle function can be activated or deactivated
with the A*, B* or C* function key.
automatic
In Ballungsgebieten sind solche Bilder selten
2. Blank out the subtitles*
The subtitle function can be switched off and on again
with the correspondingly programmed function key.
*
Note: If the subtitle function is programmed for
one of the function keys, it will automati-
cally be activated when the TV set is
switched on.
A
or
or
*
C*
B
* Depending on the assignment of the function keys
Riddle solutions key
10. Hi Text
Hi Text contains riddles with hidden answers.
Access to riddle solutions
The solutions to these riddles can be displayed with
the A*, B* or C* function key.
*
A
or
or
*
C*
B
* Depending on the assignment of the function keys.
39
11. Special picture effects
Variable Zoom
All programmes that are not transmitted in the traditional 4:3 screen format, such as cinema films in Cinemascope or Super-Cinemascope or
16:9 format, have black bars at the top and bottom of the screen.
With the zoom function, you can increase the size of the picture and make the black bars disappear. Although this also causes part of the
picture to move off the screen at each side, the resulting loss of information is slight and less disturbing than the black bars.
Press this key on the remote
The screen displays
Explanation
control....
P
+
Press the
button until the black bars at the
1. Switch on the zoom function
and enlarge the picture
top and bottom of the screen have disappeared.
The entire picture is enlarged uniformly.
The selected enlargement factor is automatically
stored for this programme position as long as the
TV set is not switched off. Switching to another
station will restore the picture to its normal size.
If you return to the station for which you activa-
ted the zoom function, the picture will be auto-
matically enlarged if the same programme is
still running.
IJ
P
+
Zoom IJ
2. Call the zoom function for
the current programme
position
If you wish to use the selected enlargement also
for other programmes, press the
key again
IJ
after setting the zoom factor with the
P
key.
+
This returns the picture to its normal size, but
stores the current enlargement factor for subse-
quent use.
IJ
If the TV set has been switched off with the
remote control or the main switch, the stored
enlargement factor can be recalled by pressing
Zoom
IJ
the
key twice.
IJ
3. Switch off the zoom function
2x
IJ
Zoom IJ
40
Still picture
11. Special picture effects
Press this key on the remote
control....
The screen displays
Explanation
The current frame is „frozen“ on the screen
when you press the II key. The TV programme (or
the video film) continues to run in the backgro-
und.
1. Activate the still picture
function
II
2. Deactivate the still picture
function
Pressing the II key again switches back to the
current programme (or video film).
II
12. Operation without remote control
This mode is only intended for an emergency when the battery in
the remote control handset is flat, or if the remote control is not
available.
Programme selection:
Press the - + keys.
The TV controls are underneath a cover at the front of the set.
Volume:
You can control the following functions on the TV without the
remote control handset. The function remains preselected for 10
seconds.
Hold down the preselect key F until the bar display for the volu-
me appears on the screen. Now press the - + keys to adjust the
volume.
Contrast:
Hold down the preselect key F until the bar display for contrast
appears on the screen. Then press the - + keys to adjust the
contrast.
41
13. Remote control handset for video recorders
Some of the basic functions of Metz video recorders can be controlled with the remote control unit. Point the remote control handset
towards the video recorder when using it.
In order to permit control of a video recorder, function key B for the TV level must be programmed to „VTR operation“ in
the menu „Equipment configuration/Assigning the function keys“ on the TV set.
Whenever a key is pressed, an indicator on the remote control unit blinks.
Nota:
• Video recorder On/OFF
• Programme position selection
Do not point the remote control
unit into your eyes and press a
key on it !
RB11
100 Hz
VTR
Do not use rechargeable batte-
ries in the remote control unit.
•
On video recorders with the data
transfer facility, immediate recording
of the programme currently displayed
on the screen
1
4
7
2
5
8
0
3
6
9
1) Press the keys B and
together.
2) Press the keys B and
together.
/VTR
/TV-REC
• Video recorder timer ON/OFF
• Next programme
-/--
•
REW (rewind)
From STOP: fast rewind
From PLAY: picture search reverse
TIMER
P
+
•
FF (fast forward)
From STOP: fast forward
-
OK
From PLAY: picture search forward
P
-
• Stop
TV
• Next programme
•
Stop - Terminates playback or recording
•
Play - Start playback
MENU
•
•
Slow-motion playback
• Still - Pause
Operator help for video rec. operation
•
•
Index - Video index search forward
• Index - Video index search reverse
AV
Switch to AV mode AV 1, AV 2, ...
REC - Start recording
.
B
REC
Ȅ
•
To switch the remote control to video
recorder mode:
Press and hold this key and press
the desired function key.
•
C
In order to permit control of a video
recorder, function key B for the TV level
must be programmed to „VTR operation“
in the menu „Equipment configu-
ration/Assigning the function keys“
on the TV set.
PRG.
ɮ
Batteries:
Insert the enclosed batteries in the remote
control, observing the symbols on the
cover of the battery compartment.
Remove exhausted batteries from the
remote control and return them to your
dealer or to an authorised battery collection
point.
IJ
IJ
42
Camcorder
Videorecorder
14. Connecting peripheral equipment
Video recorders can be connected to the TV set via the antenna socket or one of the EURO sockets. We recommend that you use one of
the EURO (Scart) sockets for this purpose, since only the EURO sockets have separate inputs and outputs for picture
and sound signals.
Camcorders
can be connected to the TV set with special cables (available from your dealer). The following connection diagram applies
in principle to all of our products, although the various sockets may be located in different positions on different units.
TV set, rear view
Cinch-Scart cable for VHS-Scart or S-VHS-Scart connection
e.g. hama no. 42387 or hama no .42394
Euro or Scart cable
Camcorder (video camera)
Video recorder, rear view
43
Connecting external
devices
14. Connecting peripheral equipment
In the menu „Device connection“, you can define which AV devices are connected to the various sockets on the TV set. The box „Devices“
contains a list of common AV devices. Only certain devices can be connected to the FRONT sockets.
Wherever possible, the AV devices should be connected to specific EURO sockets, namely:
EURO 1: VHS PC, games console ( e.g.Nintendo, photo CD, SAT receiver, Pay-TV decoder, DVD, S-VHS playback unit.
EURO 2: S-VHS/Hi8 video recorder, S-VHS/Hi8 video recorder + Pay-TV decoder, VHS video recorder, SAT receiver, SVHS/Hi8-videorecorder+Pay-TV-
Decoder, SAT-receiver.
The connections are pre-programmed in the factory as shown in the picture for step 1.
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help
In the „Device connection“ menu, you can assign one
of the defined AV devices to each of the EURO sockets.
The abbreviations in the box on the right have the
following meanings:
Video rec. = video recorder (up to 2 may be connected).
Video rec. 1 is the video recorder which is always
connected; Video rec. 2 is used for copying from one
recorder to another.
Logic VTR = video recorder with data transfer to/from
the TV set(e.g. DataLogic, QLink, EasyLink, Megalogic)
1. Call the „Device
connection“ menu
L
M
Devices
Device connection
no device
Video Rec. 1
Video Rec. 2
LogicVTR
LogicVTR+D
VTR+DEC(1)
VTR+DEC(2)
Camcorder
Mixer
blue
EURO1: Video
Decoder A
1
2
5
8
0
3
6
9
4
7
MENU
yellow
EURO2: Video
LogicVTR
--/-
P
+
-
OK
P
-
red
TV
PC
MENU
Decoder A
Decoder B
DVD
Photo CD
SAT/SetTop
Games
?
A
B
VTR+Dec. = video recorder and Pay-TV decoder (e.g.
Premiere), where the decoder is connected only to the
video recorder.
yellow
AV
REC
Ȅ
Ȅ
Signal type
selection
6 0 0 + 1 4 A - G B
Camcorder = video camera
Decoder = Pay-TV decoder (e-g- Premiere)
SAT = external satellite receiver
Game = games console
MENU
TV
?
The default settings can be modified to meet your own
requirements. You should, however, note the following
input and output signal allocations when doing this.
return
picture
Help
2. Change the device
connections
L
M
Devices
Device connection
no device
Video Rec. 1
Video Rec. 2
LogicVTR
LogicVTR+D
VTR+DEC(1)
VTR+DEC(2)
Camcorder
Mixer
blue
EURO1: Video
S-VHS / Hi8
(= Y/C =S-Video)
VHS
(= Video)
1
2
5
8
0
3
6
9
Camcorder
RGB
blue
yellow
white
green
4
7
yellow
EURO2: Video
LogicVTR
--/-
Input
Yes
Output
Yes
Input
Output
Yes
Input
Yes
P
+
-
OK
Yes
Yes
EURO 1
EURO 2
P
-
TV
PC
MENU
Yes
No
Yes
Yes
Decoder A
Decoder B
DVD
Photo CD
SAT/SetTop
Games
?
A
B
AV
To change the settings, select the appropriate EURO
socket with the coloured keys and then select the
device to be connected with the
Ȅ
Signal type
selection
6 0 0 + 1 4 B - G B
P
-
P
+
and
keys.
P
-
P
+
MENU
TV
?
return
picture
Help
When the devices are selected, the signal type is
always set to „video“. Pressing the red key displays a
box for selection of the signal type.
3. Change the signal type
L
M
Sign. type
Video Rec. 2
controls AV
operation
Device connection
blue
EURO1: Video
Camcorder
Differences between the signal types:
1
2
5
8
0
3
6
9
4
7
• continuous AV operation: the screen displays the
picture provided by the AV device. The channel setting
of the TV set has no effect.
red
yellow
EURO2: Video
LogicVTR
--/-
P
+
-
OK
continuous
P
-
AV operation
TV
• . . . controls AV operation: if the AV device is set to
„play“, the screen displays the picture provided by the
AV device; if the AV device is set to „stop“, the screen
displays the picture of the selected TV programme
position.
MENU
P
Video
YC in
-
?
P
+
A
B
AV
Ȅ
Device
selection
6 0 0 + 1 4 C - G B
4. Store the settings and
return to TV picture
TV picture
OK
TV
44
Video recorders
14. Connecting peripheral equipment
Connecting a video recorder via the aerial socket
• Connect the aerial output (RF-out) of the video recorder to the aerial socket of your TV by means of the aerial cable.
• Load a recorded video cassette in the video recorder.
• Start playback or switch on the test pattern of the video recorder. The test pattern of most video recorders is located within the standard
channels Ch 30 to Ch 40 (see operating instructions of the video recorder).
• Execute a station search, beginning with standard channel 25. See Section 3. Presetting TV stations, station search.
• If the playback picture or the test pattern of the video recorder is displayed on the screen, then this channel can be stored. See Section
3. Presetting TV stations.
• In order to ensure optimum picture quality at all times, select the option „VCR 1“. To do so, proceed as described below.
Press this key on the remote
The screen displays
Explanation
control....
The picture quality of a video film can be impro-
ved in a terrestrial programme position with a
standard channel.
MENU
TV
?
1. Select the station table and
call the picture submenu
return
picture
Help
TV station table
white
red
The video signal for this programme position
must be set to „Aerial“.
Pict. Sound
Std
Programme
LM
0
VTR1
ARD
ZDF
Auto.
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
—
1
2
3
4
5
6
7
8
9
SAT 1
blue
o.
Sharpness
Noise reduction
CTI
3
o.
A1
o.
o.
On
o.
o.
further
Logo, Channel, Signal
600+06C1-GB
MENU
To ensure optimum picture quality the „VCR“
function must be switched on.
TV
?
return
picture
Help
2. Call the second picture sub-
menu and adjust VCR
-
TV station table
Set the „VCR“ function to „1“ with the
and press the
programme position.
keys
red
red
OK
key to store the setting in the
Std
Pict. Sound
Programme
LM
0
LOGIC
ARD
Auto.
Auto.
Auto.
Auto.
o.
o.
o.
o.
o.
o.
—
—
—
—
—
—
—
—
1
2
3
4
5
6
7
8
9
TV
Press the
key to return to the TV picture.
ZDF
-
SAT 1
Chrom. adjustm.
Col. offset adj.
Contrast adj.
Picture format
VCR
00
0
00
4:3
1
If setting 1 does not result in a satisfactory picture
quality, you can switch to setting 2.
AV
OK
Logo, Channel, Signal
600+06J-GB
45
Video recorders
Video signal
14. Connecting peripheral equipment
In the following example, logic video recorder 1 is to be connected to the EURO 1 socket.
Example: Connect video recorder 1 to the EURO 1 socket.
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help
Select any desired programme position (in this
example: position 25).
1. Select any desired program-
me position and call the
station table
TV station table
Channel
Signal
Prog.
LM
Logo
20
21
22
23
24
25
26
27
28
29
PRO7
RTL2
VOX
DSF
41
24
29
52
28
36
12
42
53
61
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
1
4
7
2
5
8
3
6
9
EUSPO
-
DISCO
MTV
MDR
CNN
>> further settings
Pict., Sound, Std.,
696+11D-GB
0
white
MENU
TV
?
return
picture
Help
The video signal is normally supplied directly by the
aerial.
2. Call the submenu
„Video signal“
TV station table
Prog.
LM
Logo
Channel
Signal
20
21
22
23
24
PRO7
RTL2
VOX
41
24
29
52
28
Aerial
Aerial
Aerial
Aerial
Aerial
DSF
EUSPO
Aerial
EURO1: Video Rec. 2
white
EURO2: LogicVTR
Pict., Sound, Std.
600+14G-GB
MENU
TV
?
return
picture
Help
In order to display the picture from the video cassette
on the screen, the video signal must be set to
„EURO1“.
3. Select the video signal
EURO 1: „Video Rec.1“
TV station table
Prog.
LM
Logo
Channel
Signal
In the case of a connection via a EURO cable, you
should also set the function „VCR“ to „1“ (see also
page 45).
20
21
22
23
2
PRO7
RTL2
VOX
41
24
29
52
2
Aerial
Aerial
Aerial
Aerial
ea
DSF
yellow
ESO
Aerial
EURO1: Video Rec. 1
EURO2: LogicVTR
AV
Pict., Sound, Std.
600+14H-GB
4. Store the setting and return
to the TV picture
OK
TV
TV picture
46
Pay-TV decoder
14. Connecting peripheral equipment
This Pay-TV decoder decodes the scrambled signals of a Pay-TV station (e.g. Premiere) so that they can be displayed on the screen of the
TV set. For connection of a Pay-TV decoder, you need a EURO (=Scart) cable in which all 21 pins are assigned.
If you want to record Pay-TV programmes with a video recorder, we recommend that you connect the Pay-TV decoder directly to the video
recorder. If this is not possible, the Pay-TV decoder can be connected to the EURO 1 or EURO 2 socket (see also „Connecting external
devices“ on page 44).
The following diagram shows two different connections of a Premiere decoder Typ G2
47
Pay-TV decoder
Video signal
14. Connecting peripheral equipment
For the following explanation it is assumed that the Pay-TV decoder A (Premiere) is connected to the EURO 1 socket.
The following settings must be made on the TV set:
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help
Help
Help
Connect the decoder as shown in the figure on page 47
Call the Device connection menu on the TV set (see
page 44):
Assign the connection configuration, such as Decoder
A“ or „VTR+DEC (1)“, depending on how the decoder
is connected, to one of the EURO sockets.
.
1. Select the Pay-TV program-
me position and call the
station table
Station table
Channel
Signal
Prog.
LM
Logo
20
21
22
23
24
25
26
27
28
29
PRO7
RTL2
VOX
41
24
29
52
28
46
12
42
53
61
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
DSF
EUSPO
PREMI
DISCO
MTV
white
MDR
CNN
red
>> further settings
Std., Pict., Sound
6 9 8 - 1 1 A - G B
MENU
TV
?
return
picture
The video signal is normally supplied directly from the
aerial.
2. Call the submenu „Signal“
TV station table
Prog.
LM
Logo
Channel
Signal
20
21
22
23
24
PRO7
RTL2
VOX
41
24
29
52
28
Aerial
Aerial
Aerial
DSF
Aerial
EUSPO
Aerial
white
Aerial direct
EURO1: Decoder A
EURO2: LogicVTR
Pict., Sound, Std.
600+14D-GB
MENU
TV
?
return
picture
A Pay-TV signal must always be unscrambled in a
decoder before it can be displayed on the screen.
3. Select video signal „via
decoder“
TV station table
You can switch between „Aerial direct“ and „Aerial via
-
Prog.
LM
Logo
Channel
Signal
decoder“ with the aid of the
keys.
20
21
22
23
24
PRO7
RTL2
VOX
41
24
29
52
28
Aerial
Aerial
Aerial
Aerial
Aerial
DSF
-
EUSPO
Aerial via decoder A
EURO1: Decoder A
EURO2: LogicVTR
Pict., Sig, S
store ?
OK
600+14D1-GB
4. Store the setting and return
to TV picture
TV
OK
48
15. Technical data
Power consumption:
15.1 Upgrade kits
For satellite reception without an additional receiver.
Mains voltage: 230 V AC 50/60 Hz
• SAT upgrade kit 081 NB 1010
• SAT upgrade kit 083 NB 1018
Music power output to DIN 45324
A SAT receiver. Can also receive uncoded ADR (Astra Digital
Radio) transmissions.
Power consumption
(to CENELEC/TC 59 X):
at 4 Ohms and 1 kHz
(sine output)
• DVB-S upgrade kit 020 NG 101A
For reception of analog and digital TV and radio satellite stati-
ons, including Astra Digital (ADR), without additional receiver.
2 x 12 W
(2 x 8 W)
Linea
115 W env.
110 W env.
Ask your dealer for additional upgrade kits.
Morea
Crystal
Tiros
2 x 12 W
(2 x 18 W)
Ibiza
Power consumption/h
Linea
Morea
Crystal
Tiros
115 Wh
110 Wh
110 Wh
110 Wh
110 Wh
Ibiza
Standby (all sets):
ca. 1.5 W
Aerial input:
Channel coverage:
75 Ohms, asymmetric DIN 45325
Standard channels 2...12, 21...69
Special channels S1...S20, S21...S41
S42...S46 (Belgian OIR channels)
Guarantee
When you purchase the television, ensure that your dealer inclu-
des the completed TV „passport“. It must specify the date, the
dealer’s stamp and signature.
Keep this document in a safe place, together with the invoice. Any
claims under the warranty will only be accepted if these docu-
ments are submitted. Keep your TV clean and handle it with care.
49
16. Glossary
2-channel sound transmission:
Function keys - Teletext
Separate reproduction of 2 sound channels, e.g. 2 different languages.
• No function
Audio
No function has been assigned to this key.
• Answer or Riddle solutions
Display of the hidden answers to riddles
Latin for „I hear“ - The sound frequency range audible to the
human ear is between 60 to 20,000 Hz approx.
Camcorder
• Large font
A video camera with integrated video recorder.
Cinch (phono)
Doubles the font size in teletext.
• Stop page
Running through multiple pages consisting of more than 15 sub-
pages is automatic. This can be stopped at any page with the
„Stop page“ key so that „leafing“ can be continued manually.
Single-pole plug connector for separate audio and/or video
copying.
Data Logic
Until now, your TV set and your video recorder were two separa-
te and independent devices. With the new "Data Logic", we have
created a dialogue system with which the TV set and the video
recorder can exchange data.
Noise reduction
Can be switched on to enhance the picture quality.
OSD (On Screen Display)
Decoder
Convenient display of all functions to adjust the television. They
are superimposed on the current programme.
An electronic circuit that decodes TV signals; required to receive
coded TV transmissions, such as Premiere.
Dual-Band LNC
An LNC that can simultaneously process two transponder fre-
quency ranges (11 GHz and 12 Ghz)
Phono (cinch)
Single-pole plug connector for separate audio and/or video copying.
FBAS = CVBS
RGB control
C = composite, V = video, B = blanking, S = signal
Function keys - Television:
R = red, G = green, B = blue. Indicates separate colour signal
processing.
• No function
No function has been assigned to this key.
• Logo
Spatial sound
Mono transmissions can be reproduced with an artificial stereo effect.
The display of the station logo is meaningful only if a PIP up-
grade kit has been installed.
• Picture format (variable zoom)
Standard channels
02-12 and 21-69 can be received by way of the aerial and cable system.
Standby mode
Changes from 4:3 to 16:9 in the presence of a switching voltage.
The TV has been switched off with the remote control, or it has
switched itself off.
• Speech - music
The treble and bass boost settings are reduced in the position
„Speech“.
• Sound effects
Activates or de-activates spatial sound or base width.
• Stereo/Sound 1-2
Switches to mono when a stereo programme is being received.
To select channel 1 or 2 for two-language transmissions.
• Muting -12 dB
Stereo wide
For stereo broadcasts, the distance between the speakers can
be increased artifically to achieve a wider stereo effect.
Timer
Used to program automatic recording, or to switch a video recorder
or TV automatically on and off at a preset time.
Reduces the sound volume by 12 dB.
• Infotext
Switches from the TV picture to the user defined marks 1, 2, etc.
• Subtitles
Displays the subtitle with corresponding transmissions.
• Large subtitles
100% enlarged subtitles are displayed with corresponding
programmes.
50
17. Data Logic
What is Data Logic?
1. Connecting a Data Logic video recorder to your TV set
Until now, your TV set and your video recorder were two separate
and independent devices.
Connect the AV-1 socket of the video recorder to the Euro-2 socket
of your TV set, using a fully connected Scart cable.
With the new "Data Logic", we have created a dialogue system
with which the TV set and the video recorder can exchange data.
Data Logic will work only if there is a connection from
the AV-1 socket to the Euro-2 socket.
Video recorders with Data Logic offer the following functions:
• Switch on the video recorder.
2. Setting the TV set for Data Logic
•
Automatic transfer of station information for terrestrial or cable reception.
• Direct TV recording:
• Select programme position 0 on the TV set.
the video recorder records the programme currently displayed
on the TV screen, regardless of whether this comes from a terre-
strial antenna, a cable system or a satellite.
The TV set has been programmed in the factory for video recorder
operation on programme position 0.
In order to check this, press the white key to display the station table with
programme position 0 selected. The picture signal for this programme
• Direct control of recording:
with the menu "AV recording" or "Timer recording".
position must be set to "EURO2: LogicVTR" or "EURO2: LogicVTR+D"
.
• Status messages (such as "Timer recording started") are sent
from the video recorder to the TV set and displayed there. (Not
available on VC Series)
TV station table
Chan./Freq
.
Prog
LM
Logo
Signal
• Automatic switching to the AV programme position
(Not available on VC Series).
0
1
2
LOGIC
ARD
ZDF
05
06
34
LogicVTR+D
Aerial
Aerial
• Automatic power-off of the video recorder if the TV set is swit-
ched to standby mode. (Not available on VC Series)
If the picture signal is set otherwise, you must set it to EURO 2
"LogicVTR" or "LogicVTR+D" in the menu "Device connection"
(see Page 44 of the Operating Instructions.
Video recorders of the Metz VC series, in combination with a Metz
TV set with SAT facility, offer you the tremendous advantage of
problemfree recording of SAT programmes.
Devices
Device connection
M
no device
EURO1: Video
Decoder A
Video Rec. 1
Video Rec. 2
LogicVTR
1
2
5
8
0
3
6
9
4
7
LogicVTR+D
VTR+DEC(1)
EURO2: Video
LogicVTR
--/-
for terrestrial or
cable reception only !
Automatic transfer of station information
The automatic transfer of station information saves you the tedious procedure of programming the tuner in your video recorder.
After transfer of the information, timer recordings can also be programmed with the video recorder.
Press this key on the
The screen displays:
Explanation
remote control:
MENU
TV
?
return
picture
Help Select video programme position (factory setting:
Pr. 0) on the TV set!
1. Call the menu "Station set-
tings" on the TV set
Station settings
Station table ➜ VTR
Station table
This menu item can be selected only if there is a fully
connected Scart cable between TV and VTR.
1
2
5
8
0
3
6
9
4
7
MENU
Autostore
--/-
If no stations have been set on the video recorder, the TV
station table can be transferred to the video recorder.
P
+
-
OK
SAT programming
white
green
P
-
TV
MENU
To transfer the station information:
• Switch on the video recorder.
• Select the menu item "Station table ➜ VTR".
OK
AV
Station table ➜ VTR
?
A
B
AV
Ȅ
start ?
OK
OK
6 o o + 0 3 B 2 - G B
•
Confirm this selection by pressing
- the main
menu of the video recorder appears in the background.
2. Close the menu and set the
date and time on the video
recorder.
• After transfer of the station information, a blue menu
of the video recorder appears in the background.
TV
• Close the menu "Station settings" by pressing
.
•
Set and save the date and time on the video recorder.
51
TV
18. Index
Picture sharpness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 20
Access to riddle solution (Hi Text). . . . . . . . . . . . . . . . . . . . 39
Aerial connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Allocating a station logo . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Audio standard values . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Autostore function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
AV equipment, connecting. . . . . . . . . . . . . . . . . . . . . . 43 - 48
AV recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Premiere decoder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Presetting stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Programme selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Remote control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Riddle solutions key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Setting marks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Sorting stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Sound channels1/2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Sound effects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Sound mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3, 14, 16
Spatial sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 50
Standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Station closedown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Station search (see also Autostore). . . . . . . . . . . . . . . . . . . 10
Stereo wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 50
Still picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3, 40
Stop page. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Summer time/winter time. . . . . . . . . . . . . . . . . . . . . . . . . . 24
Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Switch ON/OFF time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15
Bass. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15
Brightness, luminance . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15
Camcorder, connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Channel entry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Childlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Chrominance, colour intensity . . . . . . . . . . . . . . . . . 14, 15,20
Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Connecting peripheral equipment . . . . . . . . . . . . . . . . 43 - 48
Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15
Cooling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Colour standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Copying (programme positions) . . . . . . . . . . . . . . . . . . . . . 11
CTI function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Teletext (see Hi Text) . . . . . . . . . . . . . . . . . . . . . . . . . 30 - 38
Thunderstorms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Time settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Transmission standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Treble. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15
TV menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 7
Data Logic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Decoder, connecting . . . . . . . . . . . . . . . . . . . . . . . . . . 47 - 48
Deleting programme positions . . . . . . . . . . . . . . . . . . . . . . 11
Direct page selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Entering the time manually. . . . . . . . . . . . . . . . . . . . . . . . . 27
Erasing marks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Upgrade kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
FBAS (CVBS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Fine tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Forced mono . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Function keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 50
Variable zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Video camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Video recorder, connecting. . . . . . . . . . . . . . . . . . . . . . . . . 43
Video standard values. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15
Volume adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Guarantee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Headphones, sound channel selection . . . . . . . . . . . . . . . . 29
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Hi Text (Teletext). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 - 38
Subject to changes as a result of technical advances. Errors
and omissions excepted.
Infotext (Mark by mark paging). . . . . . . . . . . . . . . . . . . . . . 37
Language selection (for TV menu) . . . . . . . . . . . . . . . . . . . . 5
Logo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Mains connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Mark-by-mark advance . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Moving stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Multiple pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Noise reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Operator help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Page selection by cursor . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Peripheral equipment . . . . . . . . . . . . . . . . . . . . . . . . . 43 - 48
Picture format (video recorder) . . . . . . . . . . . . . . . . . . . . . . 21
Picture settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
52
Troubleshooting and care of the set
Cleaning the set
Repairs
Always switch off the TV with the ON/OFF key before
you clean it!
The TV should only be opened and repaired by qualified
service personnel!
Cleaning notes for glossy surfaces
Cleaning:
CAUTION! DANGER!
- Clean with a soft, antistatic cloth or
- with a damp cloth and a mild detergent.
Polishing:
Consult your dealer when repairs are necessary.
If there is a technical fault in your TV set, the complete lamp
assembly must be replaced by a trained technician!
- Polish with a soft cloth and furniture polish.
- Minor scratches can be removed with car polish (type for as-
new paintwork without abrasives).
The TV set may be opened and repaired only by a trained techni-
cian.
Any unauthorized attempts to open or repair the TV may result in
the guarantee becoming null and void.
Adequate shielding is provided against X-ray radiation (see
approval certificate on the rear panel of the TV).
Changing the high voltage or fitting a different type of picture tube
may cause an increased amount of X-ray radiation. Televisions
modified in such a manner are no longer in keeping with this
approval certificate and must not be used!
53
TV. VIDEO. AUDIO. MECABLITZ
Videorecorder
Camcorder
Quality – A matter of principle.
With the trend-setting Metz technology you will
allways make the correct choice.
DVD
See your Metz dealer.
He will be happy to demonstrate the current
Metz range.
Audio
Metz-Werke GmbH & Co KG
Postfach 1267, D-90506 Zirndorf
Internet: www.metz.de
mecablitz
E-Mail:
Availability and technical details
subject to change without notice.
ķ 699 47 2039.A1
Metz. Always first class.
|
Pioneer DEH20UB User Manual
Philips 220X1 User Manual
Pentax Camera Flash 60 R User Manual
Panasonic Blu ray Player DMP BD79 User Manual
Panasonic AJ HPX3100G User Manual
Nikon 2137 User Manual
Nikon 7X50IF SP WP User Manual
NEC MultiSync LCD1860NX User Manual
MAGPiX B 1380 B1380 User Manual
Kenwood KDC HD548U User Manual