Panasonic Blu ray Player DMP BD79 User Manual

Owner’s Manual  
Blu-ray DiscTM Player  
Model No. DMP-BD89  
DMP-BD79  
Firmware updates  
Panasonic is constantly improving the unit’s firmware to ensure  
that our customers are enjoying the latest technology.  
Panasonic recommends updating your firmware as soon as you  
are notified.  
For details, refer to “Firmware updates” (> 14) or  
Thank you for purchasing this product.  
Please read these instructions carefully before using this product, and save this manual for future use.  
If you have any questions, contact:  
U.S.A. and Puerto Rico : 1-800-211-PANA(7262)  
Canada : 1-800-561-5505  
P
PC  
VQT4V11  
Precautions  
Wireless LAN connection  
The following limits are in place regarding the usage of this unit or  
Wireless LAN Adaptor. You must be aware of these limits before  
using these devices.  
Panasonic will in no way be responsible for any incidental damage  
which may arise due to a failure to obey these limits, or to any  
condition of use or disuse of these devices.  
Data transmitted and received over radio waves may be  
intercepted and monitored.  
This unit and Wireless LAN Adaptor contain delicate  
WARNING  
Unit  
To reduce the risk of fire, electric shock or product damage,  
Do not expose this unit to rain, moisture, dripping or splashing.  
Do not place objects filled with liquids, such as vases, on this unit.  
Use only the recommended accessories.  
Do not remove covers.  
Do not repair this unit by yourself. Refer servicing to qualified  
service personnel.  
electronic components.  
Please use these devices in the manner in which they were  
intended and follow the following points:  
AC power supply cord  
The power plug is the disconnecting device. Install this unit so that  
Do not expose these devices to high temperatures or direct  
sunlight.  
the power plug can be unplugged from the socket outlet  
immediately.  
Do not bend, or subject these devices to strong impacts.  
Keep these devices away from moisture.  
Do not disassemble or alter these devices in any way.  
CAUTION  
Unit  
Restriction on use of  
unauthorized copied content  
This unit utilizes a laser. Use of controls or adjustments or  
performance of procedures other than those specified herein may  
result in hazardous radiation exposure.  
Do not place sources of naked flames, such as lighted candles, on  
this unit.  
This unit adopts the following technology for copyright protection.  
Cinavia Notice  
Placement  
This product uses Cinavia technology to limit the use of unauthorized  
copies of some commercially-produced film and videos and their  
soundtracks. When a prohibited use of an unauthorized copy is  
detected, a message will be displayed and playback or copying will be  
interrupted.  
More information about Cinavia technology is provided at the Cinavia  
request additional information about Cinavia by mail, send a postcard  
with your mailing address to:  
To reduce the risk of fire, electric shock or product damage,  
Do not install or place this unit in a bookcase, built-in cabinet or in  
another confined space. Ensure this unit is well ventilated.  
Do not obstruct this unit’s ventilation openings with newspapers,  
tablecloths, curtains, and similar items.  
Do not place the unit on amplifiers/receivers or equipment that  
may become hot. The heat can damage the unit.  
Batteries  
Mishandling of batteries can cause electrolyte leakage, which can  
damage items the fluid contacts and may cause a fire.  
Danger of explosion if battery is incorrectly replaced. Replace only  
with the type recommended by the manufacturer.  
When disposing the batteries, please contact your local authorities  
or dealer and ask for the correct method of disposal.  
Do not mix old and new batteries or different types at the same  
time.  
Cinavia Consumer Information Center, P.O. Box 86851, San Diego,  
CA, 92138, USA.  
To dispose or transfer this unit  
The unit may keep the user settings information in the unit. If you  
discard this unit either by disposal or transfer, then follow the  
procedure to return all the settings to the factory presets to delete the  
user settings. (> 30, “To return all settings to the factory preset.”)  
The operation history may be recorded in the memory of this unit.  
Do not heat or expose to flame.  
Do not leave the battery(ies) in a car exposed to direct sunlight for  
a long period of time with doors and windows closed.  
Do not take apart or short circuit.  
Do not attempt to recharge alkaline or manganese batteries.  
Do not use batteries if the covering has been peeled off.  
Remove batteries if the remote control is not going to be used for a  
long period of time. Store in a cool, dark place.  
Information on Disposal in other Countries outside  
the European Union  
This symbol is only valid in the European  
Union.  
If you wish to discard this product, please  
contact your local authorities or dealer and  
ask for the correct method of disposal.  
(Inside of product)  
VQT4V11  
3
Table of contents  
Settings  
IMPORTANT SAFETY  
INSTRUCTIONS. . . . . . . . . . . 2  
Precautions . . . . . . . . . . . . . . . 3  
Option menu . . . . . . . . . . . . . . 22  
Setup menu. . . . . . . . . . . . . . . 24  
Getting started  
Reference  
Accessories . . . . . . . . . . . . . . . 5  
Unit and media care . . . . . . . . . 5  
Playable media. . . . . . . . . . . . . 6  
Control reference guide . . . . . . 8  
LED indicators. . . . . . . . . . . . . 28  
Messages . . . . . . . . . . . . . . . . 29  
Troubleshooting guide . . . . . . 30  
Specifications . . . . . . . . . . . . . 33  
Limited Warranty . . . . . . . 37, 38  
Referencia rápida en español  
Connections & Settings  
(Spanish Quick Reference). . . . 39  
Index . . . . . . . . . . . . . Back cover  
Connecting to a TV. . . . . . . . . . 9  
Connecting to  
an amplifier/receiver . . . . . . . 10  
Connecting to the network . . . 11  
Settings . . . . . . . . . . . . . . . . . 12  
Playback  
Inserting or  
removing media . . . . . . . . . . 15  
HOME menu. . . . . . . . . . . . . . 15  
Multi User Mode . . . . . . . . . . . 16  
Playback. . . . . . . . . . . . . . . . . 17  
Network Service  
(Enjoying Netflix, etc.). . . . . . 19  
Home Network feature . . . . . . 20  
“HDMI CEC” . . . . . . . . . . . . . . 21  
VQT4V11  
4
Accessories  
Unit and media care  
Check the supplied accessories before using this  
unit.  
Clean this unit with a soft, dry  
cloth  
Never use alcohol, paint thinner or benzine to  
clean this unit.  
1
Remote control  
(N2QAYB000867)  
Before using chemically treated cloth, carefully  
read the instructions that came with the cloth.  
2
1
Batteries for remote control  
AC power supply cord  
(K2CB2CB00022)  
This unit’s lens  
Use the lens cleaner (not supplied) to clean the  
unit’s lens.  
[For_Canada]  
The enclosed Canadian French label sheet corresponds  
to the English display on the unit.  
Clean discs  
Product numbers provided in this Owner’s Manual correct  
as of December 2012. These may be subject to change.  
Do not use AC power supply cord with other equipment.  
DO NOT  
DO  
Wipe with a damp cloth and then wipe dry.  
Using the remote control  
Insert so the poles (i and j) match those in the  
remote control.  
Disc handling precautions  
Handle discs by the edges to avoid inadvertent  
scratches or fingerprints on the disc.  
Do not attach labels or stickers to discs.  
Do not use disc cleaning sprays, benzine,  
thinner, static electricity prevention liquids or  
any other solvent.  
Do not use the following discs:  
– Discs with exposed adhesive from removed  
stickers or labels (rented discs, etc.).  
– Discs that are badly warped or cracked.  
– Irregularly shaped discs, such as heart  
shapes.  
R6/LR6, AA  
(Alkaline or manganese batteries)  
Point it at the remote control signal sensor on this  
unit. (> 8)  
VQT4V11  
5
Playable media  
Media  
markings  
Device  
Device types  
Contents format  
BD-Video  
BD-RE  
BD-R  
Video  
Video, JPEG  
Video, MKV  
BD  
DVD-Video  
DVD-R  
Video  
Video, AVCHD,  
MKV, JPEG, AAC,  
FLAC, MP3, WAV, WMA  
DVD  
DVD-R DL  
DVD-RW  
Video, AVCHD  
Music [CD-DA]  
+R/+RW/+R DL  
Music CD  
CD  
MKV, JPEG,  
CD-R  
CD-RW  
AAC, FLAC, MP3,  
Music [CD-DA], WAV,  
WMA  
MKV, MP4, MPEG2,  
JPEG, AAC, FLAC,  
MP3, WAV, WMA  
USB devices  
(up to 2 TB)  
USB  
See pages 7 and 33 for more information on the types of content that can be played.  
VQT4V11  
6
Discs that cannot be played in  
this unit  
Music CD  
Operation and sound quality of CDs that do not  
conform to CD-DA specifications (copy control  
CDs, etc.) cannot be guaranteed.  
Any other disc that is not specifically  
supported or previously described.  
The digital audio content side of a DualDisc  
does not meet the technical specifications of  
the Compact Disc Digital Audio (CD-DA) format  
so playback may not be possible.  
DVD-RAM  
Super Audio CD  
Photo CD  
DVD-Audio  
Video CD and Super Video CD  
HD DVD  
USB device  
This unit does not guarantee connection with all  
USB devices.  
Region management information  
BD-Video  
This unit can play BD-Video discs supporting the  
region code “A”.  
This unit does not support USB device  
charging.  
FAT12, FAT16, FAT32, and NTFS file systems  
are supported.  
Example:  
This unit supports USB2.0 High Speed.  
This unit supports an HDD formatted in FAT32  
and NTFS. If the HDD is not recognized, the  
power to the HDD may not be supplied. Supply  
power from an external source.  
DVD-Video  
This unit can play DVD-Video discs supporting  
the region number “1” or “ALL”.  
It may not be possible to play the above media in some  
cases due to the type of media, the condition of the  
recording, the recording method, and how the files were  
created.  
The producers of the disc can control how discs are  
played, so you may not always be able to control play as  
described in this Owner’s Manual. Read the disc’s  
instructions carefully.  
Example:  
1
2
1
ALL  
4
Finalize  
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW  
recorded by a recorder needs to be finalized by  
the recorder to play on this unit. Please refer to  
the recorder’s instructions.  
BD-Video  
This unit supports high bit rate audio (Dolby®  
Digital Plus, Dolby® TrueHD, DTS-HD High  
Resolution Audio and DTS-HD Master Audio)  
adopted in BD-Video.  
If “Dolby D/Dolby D +/Dolby TrueHD” is set to  
“PCM”, the maximum possible number of  
Dolby® sound is 2ch PCM. (> 24)  
VQT4V11  
7
Control reference guide  
1
2
Turn the unit on and off  
TV operation buttons  
11  
You can operate the Panasonic TV using the  
unit's remote control. Some buttons may not  
work depending on the TV.  
[Í TV] : Turn the TV on and off  
[AV] : Change input  
[i j VOL] : Adjust the volume  
Select title numbers, etc./Enter numbers  
Cancel  
1
2
12  
13  
3
4
5
6
7
8
9
3
14  
Select audio (> 17)  
4
5
15  
Basic playback control buttons (> 17)  
Show status messages (> 18)  
Show Pop-up menu/Top menu (> 18)  
Show Option menu (> 22)  
6
10 Colored buttons (red, green, blue, yellow)  
Used for various purposes depending on the  
display.  
11 Transmit the remote control signal  
12 Open or close the disc tray (> 15)  
13 Show Setup menu (> 24)  
14 Switch Secondary Video on/off  
(Picture-in-picture) (> 23)  
7
8
16  
17  
18  
19  
20  
9
15 Show the Home screen of Network Service  
(> 19)  
16 Exit the menu screen  
10  
17 Show Netflix screen (> 19)  
18 Show HOME menu (> 15)  
19 [3, 4, 2, 1] : Move the highlight for selection  
[OK] : Confirm the selection  
(;1) : Frame-by-frame (> 17)  
20 Return to previous screen  
4
3
2
1
5
6
7 8 9  
1
Standby/on switch (Í/I) (> 12)  
8
9
POWER LED  
Press to switch the unit from on to standby  
mode or vice versa. In standby mode, the unit  
still consumes a small amount of power.  
Start play (> 17)  
Stop (> 17)  
Open or close the disc tray (> 15)  
Disc tray (> 15)  
USB port (> 15)  
INFO LED (> 28, “LED indicators”)  
Displays the various states of this unit.  
Blinks when the power is turned on.  
Wait for the LED to turn solid green before  
using this unit.  
Remote control signal sensor  
Distance: Within approx. 7 m (23 feet)  
Angle: Approx. 20e up and down, 30e left and  
right  
2
3
4
5
6
7
Rear panel terminals (> 9–11)  
VQT4V11  
8
Connecting to a TV  
Connect the power supply cord after making all connections.  
Before making any connections, we recommend that you temporarily disconnect all the units from AC  
power.  
Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized. It is recommended  
that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use HDMI cables 5.0  
meters (16.4 ft.) or less.  
HDMI cable  
HDMI IN  
To a household AC outlet  
AC power supply cord (supplied)  
This unit consumes a small amount of AC power (> 33) even when turned off. For the purpose of  
power conservation, the unit can be disconnected if you will not be using it for extended period of  
time.  
VQT4V11  
9
Connecting to an amplifier/receiver  
HDMI cable  
HDMI cable  
HDMI OUT  
HDMI IN  
(ARC)  
HDMI IN  
(ARC)  
Amplifier/receiver  
Set “Digital Audio Output” (> 24).  
When using the TV or amplifier/receiver that does not have the indication of “(ARC)”  
(non-ARC-compatible) on the HDMI terminal, the amplifier/receiver and TV must also be connected  
using an optical digital cable in order to enjoy the TV’s sound through the amplifier/receiver.  
VQT4V11  
10  
Connecting to the network  
The following services can be used when this unit is connected to broadband.  
Firmware can be updated (> 14)  
You can enjoy BD-Live (> 18)  
You can enjoy Network Service (> 19)  
You can access other devices (Home Network) (> 20)  
For details about connection method, refer to the instructions supplied with the connected equipment.  
Wireless LAN connection  
[BD89] : This unit has built-in Wi-Fi® and can be connected to a wireless router.  
[BD79] : For wireless capability, connect the Wireless LAN Adaptor DY-WL5 (optional). Only DY-WL5  
can be used.  
Read the operating instructions for DY-WL5 thoroughly when using it.  
[BD89]  
[BD79]  
Wireless router, etc.  
Internet  
For up-to-date compatibility information on your wireless router, refer to  
(This site is in English only.)  
For additional information about this unit refer to  
The unit is not compatible with public wireless LAN services provided in airports, stations, cafes, etc.  
See page 3 for the precautions for wireless LAN connection.  
LAN cable connection  
LAN Cable  
Broadband router, etc.  
Internet  
Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.  
Inserting any cable other than a LAN cable in the LAN port can damage the unit.  
VQT4V11  
11  
Settings  
Wireless connection  
1 Select “Wireless” and press [OK].  
Easy Settings  
[BD79] : If “Wireless LAN Adaptor is not  
connected.” is displayed, check that the  
Wireless LAN Adaptor is fully inserted.  
Alternatively, disconnect and reconnect it. If  
there is still no change in the display, consult  
your dealer for advice.  
After connecting your new player for the first time  
and pressing [Í], the basic settings screen will  
appear.  
Preparation  
Turn on the TV and select the appropriate  
video input.  
2 Select “Search for wireless network” or  
“WPS (PUSH button method)” and press  
[OK], then follow the on-screen  
1 Press [Í].  
instructions to continue with the settings.  
Setup screen appears.  
Wireless Settings  
2 Follow the on-screen instructions and  
apply the settings.  
Select a connection method.  
Please refer to the operating instructions of your wireless  
access point about connection methods.  
Search for wireless network  
WPS (PUSH button method)  
You can perform this setup anytime by selecting “Easy  
Settings” in the Setup menu. (> 26)  
Easy Network Setting  
After completing “Easy Settings”, you can perform  
“Easy Network Setting”.  
“WPS (PUSH button method)”  
If you are using a wireless router that supports  
WPS (Wi-Fi Protected SetupTM), you can easily  
perform the settings.  
Wired connection  
Select “Wired” and press [OK].  
“Search for wireless network”  
The available wireless networks will be displayed.  
Easy Network Setting  
Select a connection mode.  
To obtain your network name (SSID*) and  
encryption key (password).  
e.g.  
The default settings may be  
printed on the router. If the  
SSID and password have been  
changed, consult the person  
responsible for setting up your  
network.  
SSID XXXXXXXXXXXX  
KEY XXXXXXXXXXXX  
PIN XXXXXXXXX  
Wired  
Wireless  
OK  
For more details, refer to the  
RETURN  
manual supplied with the wireless broadband  
router, or contact your Internet provider.  
Follow the on-screen instructions to establish  
your connection settings.  
For more information or assistance, refer to  
(U.S. customers only)  
VQT4V11  
12  
1
Select your network name and press [OK].  
If your network name is not displayed,  
search again by pressing the red button on  
the remote control. Stealth SSID will not be  
displayed; in this case, enter manually.  
To enter your network name (SSID) manually  
If your network name (SSID) is not displayed in  
step 1, follow these steps.  
1
To display the network name (SSID) input  
screen :  
While displaying the HOME menu, press the  
[SETTINGS] button on the remote control  
> select “Network” and press [OK]  
> select “Network Settings” and press [OK]  
> select “Wireless Settings” and press [OK]  
> select “Connection Setting” and press [OK]  
> select “Manual setting” and press [OK]  
Press [OK] to select “SSID” and enter your  
SSID.  
Connection Setting  
Select a wireless network for connection.  
SSID  
Reception  
XXXXXXXXXX  
XXXXXXXXXX  
XXXXXXXXXX  
XXXXXXXXXX  
XXXXXXXXXX  
XXXXXXXXXX  
XXXXXXXXXX  
2
OK  
Search again  
Wireless Settings  
OPTION  
RETURN  
Enter your network name (SSID) to connect.  
When your wireless network is encrypted  
SSID  
2
Press [OK] to select “Encryption Key”.  
Set  
Wireless Settings  
Enter the encryption key (password) of the wireless network.  
If your wireless network is encrypted, go to  
step 2.  
Encryption Key  
Set  
Refer to the operating instructions of the hub or router.  
WPS (Wi-Fi Protected Setup) is a standard that facilitates  
settings relating to the connection and security of wireless  
LAN devices. To see whether your wireless router supports  
WPS, check the wireless router operating instructions.  
You can perform this setup anytime by selecting “Easy  
Network Setting” in the Setup menu. (> 25)  
3
Enter your encryption key (password).  
You can switch between capital and lower  
case letters by pressing the “Shift” key.  
You can redo these settings individually using “Network  
Encryption Key (Password)  
Settings”. (> 25)  
Do not use this unit to connect to any wireless network for  
l
which you do not have usage rights.  
During automatic searches in a wireless network  
environment, wireless networks (SSID) for which you do  
not have usage rights may be displayed; however, using  
these networks may be regarded as illegal access.  
After performing network settings on this unit, the settings  
(encryption level, etc.) of the wireless router might change.  
When you have trouble getting online on your PC, perform  
the network settings on your PC in accordance with the  
settings of wireless router.  
Shift  
Delete  
Finish  
a
h
o
b
i
c
j
d
k
r
e
l
f
m
t
g
n
1
4
7
*
2
5
8
0
3
6
9
#
p
w
/
q
x
:
s
z
_
u
v
y
.
@
,
Space  
~
-
;
Symbols  
Alphanumeric  
Other Characters  
Please be aware that connecting to a network without  
encryption may result in the content of the communication  
being illegitimately viewed by a third party, or the leaking of  
data such as personal or secret information.  
OK  
RETURN  
* SSID:  
An SSID (Service Set IDentification) is a name used by  
wireless LAN to identify a particular network.  
Transmission is possible if the SSID matches for both  
devices.  
VQT4V11  
13  
Reprogramming the  
remote control  
Firmware updates  
Occasionally, Panasonic may release updated  
firmware for this unit that may add or improve the  
way a feature operates. These updates are  
available free of charge.  
If you have more than one Panasonic player/  
recorder and the remote control operates both  
products at once, you will need to change the  
remote control code to prevent this occurrence.  
(> 27, “Remote Control Code”)  
This unit is capable of checking the firmware  
automatically when connected to the Internet via  
a broadband connection.  
When a new firmware version is available, the  
following message is displayed.  
New firmware is available.  
Please update firmware in Setup.  
To update the firmware  
Press [HOME]  
> press the [SETTINGS] button on the remote  
control  
> select “System” and press [OK]  
> select “Firmware Update” and press [OK]  
> select “Update Now” and press [OK]  
DO NOT DISCONNECT the unit from the AC  
power or perform any operation while the update  
takes place.  
After the firmware is installed, INFO LED and  
POWER LED flash 3 times (> 8, “Control  
reference guide”), and “FIN” will be displayed on  
the screen. Unit will restart and the following  
screen will be displayed.  
The firmware was updated.  
Current Version: x.xx  
OK  
RETURN  
If downloading on this unit fails or this unit is not  
connected to the Internet, then you can download the  
latest firmware from the following website and burn it  
to a CD-R to update the firmware.  
(This site is in English only.)  
To show the firmware version on this unit.  
(> 27, “Firmware Version Information”)  
Downloading will require several minutes. It may take  
longer or may not work properly depending on the  
connection environment.  
If you do not want to check for the latest firmware version,  
set “Automatic Update Check” to “Off”. (> 27)  
VQT4V11  
14  
Playback  
Inserting or removing  
media  
HOME menu  
Major functions of this unit can be operated from  
the HOME menu.  
Preparation  
Turn on the TV and select the appropriate video  
input on the TV.  
1 Press [Í] to turn on the unit.  
After network service introduction banner is  
shown, the HOME menu is displayed.  
–When connected to the network, the  
banner content may be changed.  
You can disable the “Start-up Banner”  
(> 27).  
Notes  
When inserting a media item, ensure that it is  
facing the right way up.  
2
Press [OK] or [  
3,  
4,  
2,  
1] to select the item.  
If you connect a Panasonic product with a USB  
connection cable, the setup screen may be  
displayed on the connected equipment. For  
details, refer to the instructions for the  
connected equipment.  
If there are any other items, repeat this step.  
HOME  
Network  
Blu-ray Disc Player  
Photos  
Setup  
Music  
CAUTION  
Do not place objects in front of the unit. The disc  
tray may collide with objects when it is opened,  
and this may cause malfunction.  
Videos  
Personalize  
1st user  
Videos/Photos/Music  
Play back the contents. (  
>
17)  
Disc  
When multiple contents are  
recorded, select the types  
of contents or the title.  
USB  
Network  
Network  
Service  
Displays the Home screen of  
Network Service. (> 19)  
DLNA Client (> 20)  
Home Network  
Media Renderer (> 20)  
Setup  
Player Settings (> 24)  
USB Management (> 18)  
Changes the background of  
HOME menu.  
Wallpaper  
To show the HOME menu  
Press [HOME].  
Items to be displayed may vary with the media.  
Where necessary, set “Mixed Data Disc Option” when  
using a disc with both data files (MP3, JPEG, MKV, etc.)  
and Video (BDAV and AVCHD). (> 27)  
VQT4V11  
15  
Multi User Mode  
Personalizing a new user  
Multi User Mode allows individuals to customize  
settings and switch to their saved settings easily.  
Up to 4 people can use the unit with their own  
settings.  
1 Press [HOME].  
2 Press the colored button that indicates  
new user personalization.  
The following settings can be personalized:  
The user icon  
The wallpaper of HOME menu  
The audio and picture settings (> 22, 24)  
3 Select an item and change the settings  
according to the indications.  
The following items can be set.  
Input  
HOME  
Personalize a user name.  
Nickname  
User 1  
A
Network  
Blu-ray Disc Player  
Personalize a user icon.  
Photos  
Setup  
Music  
Select from Illustrations  
The image can be selected from  
Videos  
prepared illustrations.  
Select Icon  
User 1  
Personalize  
2nd user  
Create from Photos  
B
You can select a photo in  
recording media as an icon.  
(> 22, “Icon Personalization”)  
A
B
The user name and icon currently selected  
Personalize a new user and switch between  
users with colored buttons.  
Personalize a background of the  
HOME menu.  
Select  
Wallpaper  
In addition to default wallpapers,  
you can select a photo in  
recording media as a wallpaper.  
(> 22, “Wallpaper”)  
4 Select “Confirm” and press [OK].  
To change the personalized user information  
Select “Edit User Information” from Setup menu.  
(> 27)  
Switching the user  
Press the colored buttons in the HOME menu  
to switch to the user corresponding to the  
button.  
VQT4V11  
16  
Playback  
Operations during playback  
1 Insert the media.  
The following functions may not work depending  
on the media and contents.  
Playback starts depending on the media.  
Stop  
2 Select the item to play and press [OK].  
Press [STOP].  
Repeat this procedure if necessary.  
The stopping point is memorized.  
Resume play function  
DISCS CONTINUE TO ROTATE WHILE MENUS ARE  
DISPLAYED. Press [STOP] when you have finished  
playback to protect the unit’s motor, your TV screen and so  
on.  
Press [1PLAY] to restart from this point.  
The point is cleared if the media is removed.  
On BD-Video discs including BD-J, the  
resume play function does not work.  
MKV: Successive play is not possible.  
It is not possible to play back AVCHD and MPEG2 videos  
which have been dragged and dropped or copied and  
pasted to the media.  
To save on electricity, this unit is turned off automatically if  
there is no button operation for about 30 minutes when not  
playing back (such as when paused or displaying the  
menu, displaying still pictures, etc.). (Compatible with  
ENERGY STAR)  
Pause  
Press [;PAUSE].  
Press [;PAUSE] again or [1PLAY] to restart  
play.  
Search/Slow motion  
Search  
While playing, press [SEARCH6] or  
[SEARCH5].  
Slow motion  
While paused, press [SEARCH5].  
The speed increases up to 5 steps.  
Music, MP3, etc.: The speed is fixed to a single  
step.  
Press [1PLAY] to revert to normal playback  
speed.  
Skip  
While playing or paused, press [:] or  
[9].  
Skip to the title, chapter or track.  
Frame-by-frame  
While paused, press [1] (;1).  
Press and hold to change in succession  
forward.  
Press [1PLAY] to revert to normal playback  
speed.  
Changing audio  
Press [AUDIO].  
You can change the audio channel number or  
soundtrack language, etc.  
VQT4V11  
17  
Displaying menus and  
playback information  
Enjoying BD-Live  
With “BD-Live” discs, you can enjoy bonus  
contents that use Internet access.  
For this BD-Live function, connection of a USB device  
is necessary along with Internet connection.  
Show top menu/pop-up  
menu  
1 Perform network connection and settings.  
Press [POP-UP MENU/TOP MENU].  
Select the item and press [OK].  
(> 11, 12)  
[BD79] : Use a LAN cable for a network  
connection.  
Show the status messages  
2 Connect a USB device with 1 GB or more  
free space.  
While playing, press [STATUS].  
The status messages give you information about  
what is currently being played. Each time you  
press [STATUS], the display information may  
change or will disappear from the screen.  
Depending on media and contents, the display  
may change or may not appear.  
The USB device is used as the local storage.  
3 Insert the disc.  
Deleting data on the USB device  
Select “USB Management” in the HOME menu  
(> 15), then select “BD-Video Data Erase” and  
press [OK].  
e.g., BD-Video  
A
B
BD-Video  
T1 C1 0:05.14  
Play  
0:20.52  
D
The usable functions and the operating method may vary  
with each disc, please refer to the instructions on the disc  
and/or visit their website.  
C
A
B
C
D
T: Title, C: Chapter, PL: Playlist  
Elapsed time in the title  
Current position  
“BD-Live Internet Access” may need to be changed for  
certain discs (> 26).  
Total time  
Slideshow  
e.g., JPEG  
Play a slideshow of photos and adjust various  
settings during the playback.  
1 / 26  
Date  
Size  
Manufacturer  
Equipment  
11/12/2007  
500 x 375  
1 Insert the media.  
2 Select “Photos”.  
3 Select an item and press the green button.  
The following items can be set.  
Start the slideshow.  
Start  
Slideshow  
You can display still pictures in  
the selected folder one by one at  
a constant interval.  
Display  
Interval  
Change the display interval.  
Transition  
Effect  
Select the effect when sliding  
pictures.  
Repeat Play Set whether to repeat the slideshow.  
Still pictures displayed as “  
” cannot be played back  
with this unit.  
VQT4V11  
18  
Network Service  
In the following cases, settings are possible using the  
Setup menu items.  
– When restricting the use of Network Service  
(> 26, “Network Service Lock”)  
– When correcting the displayed time  
(Enjoying Netflix, etc.)  
Network Service allows you to access some  
specific websites supported by Panasonic, and  
enjoy Internet contents such as photos, videos,  
etc. from Network Service Home screen. This unit  
has no full browser function and some features of  
websites may not be available.  
Some services such as Netflix require a  
registered account.  
For details of your Netflix account, refer to  
Netflix.  
(> 25, “Time Zone”, “DST”)  
If using slow Internet connection, the video may not be  
displayed correctly. A high speed Internet service with a  
speed of at least 6 Mbps is recommended.  
Be sure to update the firmware when a firmware update  
notice is displayed on the screen. If the firmware is not  
updated, you may not be able to use Network Service  
function properly. (> 14)  
Network Service Home screen is subject to change without  
notice.  
The services through Network Service are operated by  
their respective service providers, and service may be  
discontinued either temporarily or permanently without  
notice. Therefore, Panasonic will make no warranty for the  
content or the continuity of the services.  
Network Service provides a variety of  
selected Internet services such as the  
following.  
Some features of websites or content of the service may  
not be available.  
Online movie rental service  
Video browsing service  
Some content may be inappropriate for some viewers.  
Some content may only be available for specific countries  
and may be presented in specific languages.  
Network Service  
*
Settings  
Internet  
*
Images are for illustration purposes, contents may change  
without notice.  
Preparation  
Network connection (> 11)  
Network setting (> 12)  
1 Press [INTERNET].  
Netflix can be accessed directly by pressing  
[NETFLIX] button.  
2 Select the item and press [OK].  
To exit from Network Service  
Press [HOME].  
VQT4V11  
19  
Home Network feature  
Using the Digital Media  
Controller  
You can use a smartphone or tablet as the Digital  
Media Controller (DMC) to play back contents  
from DLNA server on the Renderer (this unit).  
Playing back contents on  
the DLNA server  
You can share photos, videos and music stored in  
the DLNA Certified media server (PC with  
Windows 7 installed, smartphone, etc.) connected  
to your home network, and enjoy the contents  
with this player.  
Possible applications:  
About support format of DLNA client (> 34).  
Before using the DLNA feature, be sure to  
configure the DLNA server on your Home  
Network.  
*
Server  
Renderer  
*
Controller  
*
Server  
+
Renderer  
Controller  
Server  
Player  
*
DMC compatible software should be installed.  
Preparation  
Preparation  
1
2
3
Perform network connection (> 11) and  
network settings (> 12) of this unit.  
Perform Home Network settings of the  
connected equipment.  
Add the contents and folder to the libraries of the  
Windows Media® Player or the smartphone, etc.  
Perform steps 1to 3. (> left)  
4
Perform the “Remote Device Settings”. (  
>
26)  
You can register up to 16 devices.  
1 Press [HOME].  
Playlist of Windows Media® Player can play back  
only the contents that are stored in the libraries.  
2 Select “Network”.  
3 Select “Home Network”.  
4 Select “Media Renderer”.  
1 Press [HOME].  
2 Select “Network”.  
3 Select “Home Network”.  
4 Select “DLNA Client”.  
5 Operate the DMC compatible devices.  
To exit from Media Renderer screen  
The list can be updated by pressing the red  
button on the remote control.  
Press [HOME].  
5 Select the equipment and press [OK].  
6 Select the item to play and press [OK].  
For more details, refer to the following website  
and the operating instructions for each of the  
equipment.  
(This site is in English only.)  
You may be able to use convenient  
functions depending on the content by  
pressing [OPTION].  
e.g.,  
Control Panel is  
displayed once the  
playback starts.  
EXIT  
Depending on the contents and the connected equipment,  
playback may not be possible.  
Items displayed in gray on the display cannot be played  
back by this unit.  
Press [OK] if the  
Control Panel is not  
displayed, and press  
This unit can be played back via connected equipment only  
when controlled using DMC.  
[RETURN] to hide the Control Panel.  
To exit from Home Network  
Press [HOME].  
VQT4V11  
20  
“HDMI CEC”  
Power off link  
This unit supports “HDMI CEC” (Consumer  
Electronics Control) function.  
All connected equipment compatible with “HDMI  
CEC”, including this unit, automatically turns off  
when you switch the TV off.  
See the operating instructions for connected  
equipment for operational details.  
Preparation  
1
2
3
Set “HDMI CEC” to “On” (> 27). (The default  
setting is “On”.)  
Operation cannot be guaranteed on all HDMI CEC  
devices.  
Set the “HDMI CEC” operations on the  
connected equipment (e.g., TV).  
Turn on all “HDMI CEC” compatible  
equipment and select this unit’s input channel  
on the connected TV so that the “HDMI CEC”  
function works properly.  
Repeat this procedure when the  
connections or settings are changed.  
Automatic input switching  
Power on link  
When play starts on the unit, the TV will  
automatically switch the input channel and the  
screen of this unit will be displayed.  
Additionally when the TV is off, the TV will  
automatically turn on.  
VQT4V11  
21  
Settings  
Option menu  
Operation Menu  
A variety of playback operations and settings can  
be performed from this menu.  
Soundtrack  
Available options differ depending on the playing  
contents and the condition of the unit.  
Show or change the soundtrack.  
Audio channel  
Select the audio channel number.  
About Multi User Mode  
: Settings of the items with this indication are  
saved by the respective users registered in the  
HOME menu.  
Please refer to page 16 for details about user  
registration and switching.  
Subtitle  
Change the subtitle settings.  
Angle  
Select the number of the angle.  
1 Press [OPTION].  
When playing music, select “Playback  
Repeat Play  
Settings” and press [OK].  
Select the item that you want to repeat.  
The items displayed differ depending on the  
type of media.  
e.g., BD-Video  
Select “Off” to cancel.  
Operation Menu  
Soundtrack  
1
ENG Dolby TrueHD ...  
Subtitle  
Shuffle  
Angle  
1
Repeat Play  
Status  
Off  
Select whether or not to play random.  
Primary Video  
Secondary Video  
Top Menu  
MPEG-4 AVC  
Start Slideshow  
Start the slideshow.  
Pop-up Menu  
Status  
Show the status messages.  
2 Select an item and change the settings.  
Rotate Right  
Rotate Left  
Rotate the still picture.  
To exit the screen  
Press [OPTION].  
Regarding Language : (> 34)  
Wallpaper  
Set the still picture to the wallpaper of HOME  
menu. (> 15)  
Icon Personalization  
Set the still picture as your user icon. (> 16)  
VQT4V11  
22  
Video  
The recording method of original video appears.  
Video Settings  
Primary Video  
Picture Mode  
The recording method of original primary video  
appears.  
Select the picture quality mode during play.  
If you select “User”, you can change settings in  
“Picture Adjustment”.  
Secondary Video  
Picture Adjustment  
Specific picture quality settings can be changed.  
Select on/off for images. The  
recording method of original  
video appears.  
During search/slow motion or  
Video  
Progressive  
Select the method of conversion for progressive  
output to suit the type of material being played.  
frame-by-frame, only the  
primary video is displayed.  
When the content is distorted, change the  
settings from “Auto” to “Video”.  
Select on/off for audio and the  
language.  
Soundtrack  
24p  
Top Menu  
Movies and other material recorded on  
DVD-Video at 24p are output at 24p.  
Only when you have selected “On” in “24p  
Output” (> 24).  
Display Top Menu.  
Pop-up Menu  
Display Pop-up Menu.  
Reset to Default Video Settings  
Return video settings to the factory preset.  
Menu  
Display Menu.  
Audio Settings  
Dialog Enhancer  
The volume of the center channel is raised to  
make dialog easier to hear.  
This function is effective only when “Digital  
Audio Output” is set to “PCM” (> 24).  
VQT4V11  
23  
Setup menu  
¾24p Output  
When this unit is connected to a TV supporting  
1080/24p output, movies and other material  
recorded at 24p* are output at 24p.  
Change the unit’s settings if necessary. The settings  
remain intact even if you switch the unit to standby.  
Some items in the Setup menu are common to  
the Option menu. You can get the same effect  
with both menus.  
When playing DVD-Video, set to “On” and then set  
“24p” in “Video Settings” ( 23) to “On”.  
>
When BD-Video/DVD-Video images other  
than 24p are played, images are output at  
60p.  
About Multi User Mode  
: Settings of the items with this indication are saved  
by the respective users registered in the HOME menu.  
Please refer to page 16 for details about user  
registration and switching.  
¾Deep Color Output  
This setting is for selecting whether to use Deep  
Color output when a TV that supports Deep  
Color is connected.  
1 While displaying the HOME menu, press  
[SETTINGS].  
¾Contents Type Flag  
Player Settings  
Depending on the playback content, the TV will  
output adjusting to the optimal method when a  
TV that supports this function is connected.  
Picture Mode  
Normal  
Video  
Picture Adjustment  
HDMI Output  
Audio  
Language  
Network  
Ratings  
System  
*
A progressive image recorded at a rate of 24 frames per  
second (motion-picture film). Many BD-Video movie  
contents are recorded in 24 frames/second in accordance  
with the film materials.  
OK  
RETURN  
Audio  
2 Select an item and change the settings.  
Dialog Enhancer  
(> 23)  
To exit the screen  
Press [HOME].  
Dynamic Range Compression  
You can listen at low volumes but still hear dialog clearly.  
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)  
“Auto” is effective only when playing Dolby  
TrueHD.  
Video  
Picture Mode  
(> 23)  
Digital Audio Output  
Picture Adjustment  
(> 23)  
Press [OK] to show the following settings:  
HDMI Output  
Press [OK] to show the following settings:  
¾Dolby D/Dolby D +/Dolby TrueHD  
¾DTS/DTS-HD  
Select the audio signal to output.  
¾HDMI Resolution  
The items supported by the connected devices are  
indicated on the screen as “  
Select “PCM”, when the connected equipment  
cannot decode the respective audio format. This  
unit decodes the audio format and transmits to the  
connected equipment.  
¢”. When any item  
without “ ” is selected, the images may be distorted.  
¢
If “Auto” is selected, the best suited output  
resolution to the connected TV is  
Not making the proper settings may result in noise.  
automatically selected.  
¾BD-Video Secondary Audio  
To enjoy high-definition video up-converted to  
1080p, you need to connect the unit directly  
to 1080p compatible HDTV (High Definition  
TV). If this unit is connected to an HDTV  
through other equipment, the other equipment  
must also be 1080p compatible.  
Select whether or not to mix the primary and  
secondary audio (including the button click sound).  
If “Off” is selected, the unit outputs the primary  
audio only.  
VQT4V11  
24  
Downmix  
Network  
Select the downmix system of multi-channel to  
2-channel sound.  
Select “Surround encoded”, when the  
connected equipment supports the virtual  
surround function.  
The downmix effect is not available when  
“Digital Audio Output“ is set to “Bitstream”.  
The audio will be output in “Stereo” in the  
following cases:  
Easy Network Setting (> 12)  
Network Settings  
Perform network-related settings individually.  
Press [OK] to show the following settings:  
¾LAN Connection Mode  
Select the LAN connection method.  
– AVCHD playback  
– Playback of secondary audio (including the  
button click sound).  
¾Wireless Settings  
This allows the wireless router and connection  
settings to be set. Current connection settings  
and connection state can be checked.  
DTS Neo:6  
2ch (2.1ch) audio is expanded to 7ch (7.1ch)  
before it is output.  
Audio expansion is enabled when you have  
selected “PCM” in “Digital Audio Output”.  
This does not function on Dolby sound.  
Connection Setting  
The wireless router connection wizard will be  
displayed.  
Double Speed Mode Setting (2.4GHz)  
Set the connection speed for a 2.4 GHz  
wireless format.  
Language  
If you connect using the “Double Speed  
Mode (40MHz)”, 2 channels use the same  
frequency band, and there is consequently  
a greater risk of reception interference. This  
can cause the connection speed to drop or  
become unstable.  
Audio Language  
Choose the language for audio.  
If “Original” is selected, the original language of  
each disc will be selected.  
Enter a code (> 34) when you select “Other  
¢¢¢¢”.  
¾IP Address/DNS Settings  
This is for checking the state of the network  
connection and setting the IP address and  
DNS-related.  
Subtitle Language  
Choose the language for the subtitle.  
If “Auto” is selected and the language selected  
for “Audio Language” is not available, subtitles  
of that language will automatically appear if  
available on that disc.  
Press [OK] to show the respective setting.  
¾Proxy Server Settings  
This is for checking the state of connection with  
the Proxy server and performing settings.  
Press [OK] to show the respective setting.  
Enter a code (> 34) when you select “Other  
¢¢¢¢”.  
Menu Language  
¾Network Service Settings (> 19)  
Choose the language for the disc menus.  
Enter a code (> 34) when you select “Other  
¢¢¢¢”.  
Press [OK] to show the following settings:  
Time Zone  
Subtitle Text  
Set the unit’s time to match your location.  
Some Network Service contents require the  
time zone to be set. Set the time zone if  
necessary.  
Select a suitable item according to the language  
used for MKV subtitles text.  
This item is displayed only after playing back a file.  
On-screen Language  
Choose the language for menus and on-screen messages.  
DST  
Select “On” when using Daylight Saving time.  
VQT4V11  
25  
¾Network Drive Connection  
Ratings  
The following items use the same password.  
Don’t forget your password.  
It is possible to access the shared folder of  
equipment not compatible with DLNA, such as  
the Windows XP operating system, and play  
back video, still pictures, and music on this unit.  
For the setting and operation method of  
connected equipment, refer to the following  
website.  
DVD-Video Ratings  
Set a ratings level to limit DVD-Video play.  
BD-Video Ratings  
Set an age limit of BD-Video play.  
(This site is in English only.)  
Network Service Lock  
You can restrict the usage of Network Service.  
¾Remote Device Settings (> 20)  
Press [OK] to show the following settings:  
Remote Device Operation  
Enable to operate by DMC.  
If “On” is selected, “Quick Start” will be  
activated.  
System  
Easy Settings  
You can execute basic settings.  
Setting Unit Name  
Set the name of this unit to be displayed on  
the connected equipment.  
Display Settings  
Press [OK] to show the following settings:  
¾TV Aspect  
Registration Type  
Set to match the type of TV connected.  
Allow connection to all the  
Auto  
When connected to a 4:3 aspect TV and playing  
16:9 ratio image:  
equipment accessing this unit.  
Set the permission for  
individual equipment  
connections accessing this  
The sides are cut  
off so the picture  
Manual  
4:3 Pan &  
unit.  
fills the screen.  
Scan  
When playing  
BD-Video, video is output as “4:3  
Letterbox”.  
Remote Device List  
Registering/deregistering of the displayed  
equipment can be performed when “Manual”  
in “Registration Type” is selected.  
Black bands  
appear at the top  
and bottom of the  
picture.  
4:3  
Letterbox  
¾BD-Live Internet Access (> 18)  
You can restrict Internet access when BD-Live  
functions are used.  
If “Allow ( Limited )” is selected, Internet  
access is permitted only for BD-Live contents  
which have content owner certificates.  
When connected to a 16:9 widescreen TV and  
playing 4:3 ratio image:  
Video is displayed as a 4:3 ratio  
16:9  
image in the center of the  
screen.  
Video is displayed as a  
horizontally stretched 16:9  
image.  
16:9 Full  
VQT4V11  
26  
¾Screen Saver Function  
Remote Control Code  
This is to prevent image retention on the  
screen.  
Change the remote control code if other  
Panasonic products react to this remote control.  
When this is set to “On”:  
If a list of playback content is displayed and  
there is no operation for 10 minutes or more,  
the screen switches to HOME menu  
automatically.  
Firmware Update (> 14)  
Press [OK] to show the following settings:  
¾Automatic Update Check  
While playing and pausing, etc., this function  
is not available.  
When this equipment remains connected to the  
Internet, it will check for the latest firmware  
version when it is turned on and you can update  
it if necessary.  
¾Status Messages  
Choose whether to show status messages  
automatically.  
¾Update Now  
You can update the firmware manually if a  
firmware update is available.  
¾HDMI CEC  
Set to use “HDMI CEC” function when  
connected to a device that supports “HDMI  
CEC”.  
System Information  
Press [OK] to show the following settings:  
Select “Off” when you do not want to use  
“HDMI CEC”.  
¾License  
Information about the software used by this unit  
is displayed.  
Unit Settings  
Press [OK] to show the following settings:  
¾Firmware Version Information  
Display firmware version of this unit and  
wireless LAN module.  
¾Mixed Data Disc Option  
Select the playback contents on discs with both  
data files and Video.  
If “MP3/JPEG/MKV” is selected, the video  
menu function (except MKV) cannot be  
played back.  
If “BDAV/AVCHD” is selected, data file cannot  
be played back.  
Restore Default Settings  
This returns all values in the Setup menu and the  
Option menu to the default settings, except for  
some settings of network, ratings, remote control  
code, language, etc.  
¾Edit User Information  
Change the user information registered in the  
HOME menu.  
Start-up Banner  
Select whether to display the banner after turning  
on this unit. (> 15)  
Quick Start  
Speed of start-up from standby mode is  
increased.  
When set to “On”, the internal control unit will be  
powered and the idle power consumption will  
increase compared to when set to “Off”. (About  
the power consumption > 33)  
VQT4V11  
27  
LED indicators  
Error states are indicated by the INFO LED.  
Confirm the following items in correspondence to the state of INFO LED on the front panel of this unit.  
If the state of the INFO LED does not change after performing the operations in the table below,  
contact your local Panasonic dealer.  
INFO LED  
INFO LED state  
Description  
The remote control and this unit are using different codes.  
“Remote control ” is displayed on the screen.  
Press and hold [OK] and the displayed number (“”) for at least 5  
seconds.  
Flashes 6 times  
The USB device is drawing too much power. Please disconnect or  
remove the USB device from the unit.  
Lights up  
The USB device may be incompatible.  
The following conditions are possible:  
The copyright protected disc cannot be played back.  
One of the devices connected to this unit (TV, amplifier, etc.) does not  
support copyright protection.  
Temperature of this unit is hot and the unit switches to standby for  
safety reasons.  
Flashes  
Wait for about 30 minutes.  
Select a position with good ventilation when installing the unit.  
The disc in use cannot be played back since the copyright information is  
invalid.  
Flashes 3 times  
VQT4V11  
28  
Messages  
Check the following when messages are  
displayed on the screen.  
Cannot play.  
¾
You inserted an incompatible disc (Discs  
recorded in PAL video, etc.).  
Cannot display on this unit.  
You tried to play a non-compatible image.  
¾
No disc inserted.  
The disc may be upside down.  
¾
$ This operation is not available.  
¾
Some operations are unsupported by the unit.  
(For example, reverse slow motion, etc.)  
IP address is not set.  
¾
The “IP Address” in “IP Address/DNS  
Settings” is “---. ---. ---. ---”. Set the “IP  
Address”, “Subnet Mask”, and “Default  
Gateway”. (Select the automatic address  
acquisition if necessary.)  
The current wireless network security setting  
is weak. It is recommended to change to a  
stronger security setting.  
¾
Set a stronger network security level referring  
to the wireless router operating instructions.  
VQT4V11  
29  
Troubleshooting guide  
General operation  
Before requesting service, please perform the  
following steps.  
To return to the factory preset.  
¾
Select “Yes” in “Restore Default Settings” in  
the Setup menu. (> 27)  
Do you have the latest firmware installed?  
Panasonic is constantly improving the unit’s  
firmware to ensure that our customers are  
enjoying the latest technology. (> 14)  
4
Make the following checks and visit our  
website for more information.  
For U.S.A. :  
Enter the model number.  
For Canada :  
To return all settings to the factory preset.  
¾
1
2
Reset the unit as follows:  
Turn the unit on.  
Press and hold [OK], the blue button and the  
yellow button on the remote control at the  
same time for more than 5 seconds.  
– INFO LED and POWER LED start to flash,  
and “00RET” is displayed on the screen.  
Press [1] (right) repeatedly on the remote  
control until “08FIN” is displayed on the  
screen.  
3
4
4
Or visit our website to find a service center.  
You can find a service center near you easily  
on our website.  
Press and hold [OK] for more than 5 seconds.  
The remote control does not work properly.  
¾
Change the batteries in the remote control.  
(> 5)  
Other support information:  
“Customer Services Directory (United States  
and Puerto Rico)” (> 37) or “Limited Warranty  
(Only for CANADA)” (> 38).  
¾
The remote control and this unit are using  
different codes. If “Remote control ” is  
displayed on the screen when a button is  
pressed on the remote control, change the  
code on the remote control. (> 27, 28)  
The following do not indicate a problem with  
this unit:  
– Regular disc rotating sounds.  
– Image disturbance during search.  
The TV tuner mode is not displayed when the  
TV is switched on.  
¾
This phenomenon may occur, depending on  
the TV setting, when “Quick Start” is set to  
“On”.  
Unit does not respond to remote  
control or front panel buttons.  
¾
Depending on the TV, this phenomenon may  
be prevented by reconnecting the HDMI cable  
to a different HDMI input terminal or by  
changing the HDMI auto connection setting.  
Disconnect AC power supply cord, wait 1 minute,  
then reconnect AC power supply cord.  
Cannot eject disc.  
1
Turn the unit on.  
You have forgotten your ratings password.  
You want to cancel the ratings level.  
2
Press and hold [OK], the blue button and the  
yellow button on the remote control at the  
same time for more than 5 seconds.  
– INFO LED and POWER LED start to flash,  
and “00RET” is displayed on the screen.  
Press [1] (right) repeatedly on the remote  
control until “06FTO” is displayed on the  
screen.  
¾
1
2
The ratings level returns to the factory preset.  
Turn the unit on.  
Press and hold [OK], the blue button and the  
yellow button on the remote control at the  
same time for more than 5 seconds.  
– INFO LED and POWER LED start to flash,  
and “00RET” is displayed on the screen.  
Press [1] (right) repeatedly on the remote  
control until “03 VL” is displayed on the screen.  
Press [OK].  
3
4
Press [OK].  
3
4
VQT4V11  
30  
This unit does not recognize the USB  
connection correctly.  
Picture  
¾
Disconnect and reconnect the USB cable. If it  
still does not recognize the connection, turn  
this unit off and on again.  
The images from this unit do not appear on  
the TV.  
Picture is distorted.  
¾
USB devices may not be recognized by this  
unit when connected using the following :  
– a USB hub  
¾
An incorrect resolution is selected in “HDMI  
Resolution”. Reset the setting as follows:  
Turn the unit on.  
Press and hold [OK], the blue button and the  
yellow button on the remote control at the  
same time for more than 5 seconds.  
– INFO LED and POWER LED start to flash.  
Press and hold [8] and the blue button on the  
remote control at the same time for more than  
5 seconds.  
1
2
– a USB extension cable other than the  
supplied with the Wireless LAN Adaptor  
DY-WL5 (optional)  
¾
If you connect USB HDD to this unit, use the  
USB cable that is supplied with the HDD.  
3
Set the item again. (> 24)  
– When Dolby Digital Plus, Dolby TrueHD,  
and DTS-HD audio are not output properly,  
select “Yes” in “Restore Default Settings”  
and make proper settings. (> 27)  
Video is not output in high-definition.  
¾
Confirm that “HDMI Resolution” in the Setup  
menu is set properly. (> 24)  
No subtitles.  
When progressive output is on, closed  
captions/subtitles cannot be displayed.  
¾
The subtitles overlap closed captions  
recorded on discs.  
¾
Turn off the subtitles or the closed caption  
setting on the TV. (> 22)  
A black band is displayed around the edge of  
the screen.  
The aspect ratio of the screen is abnormal.  
¾
¾
Confirm the “TV Aspect” is set properly.  
(> 26)  
Adjust the aspect setting on the TV.  
VQT4V11  
31  
Audio  
Network  
Cannot hear the desired audio type.  
I can’t connect to the network.  
¾
Check the connections and the “Digital Audio  
Output” settings. (> 10, 24)  
¾
Confirm the network connection and settings.  
(> 11, 12, 25)  
¾
There may be obstacles that prevent the unit  
from detecting your home network. Bring the  
unit and the wireless router closer to each  
other. This unit may be able to detect your  
network name (> 13, “SSID”).  
Playback  
Disc cannot be played.  
¾
Check the operating instructions for each  
device and connect accordingly.  
¾
¾
The disc is dirty. (> 5)  
The disc is not finalized. (> 7)  
Cannot play current title.  
Still pictures (JPEG) do not play back  
normally.  
¾
Confirm the network connection and settings.  
(> 11, 12, 25)  
¾
The images that were edited on the PC, such  
as Progressive JPEG, etc., may not be played  
back.  
When using wireless LAN connection, video  
from the DLNA Certified media server is not  
played back or video frames are dropped  
during playback.  
I can’t play back BD-Live.  
¾
Higher transfer rate router such as 802.11n  
(2.4 GHz) wireless router may solve the  
problem. If you use 802.11n (2.4 GHz)  
wireless router, it is necessary to set the  
encryption type to “AES”.  
Simultaneous use with a microwave, cordless  
telephone etc. at 2.4 GHz may result in  
connection interruptions or other problems.  
On the “Wireless Settings” screen (> 25), the  
continuous lighting of at least 4 “Reception”  
indicators is the target for a stable connection.  
If 3 or fewer indicators are lit or the  
¾
¾
¾
¾
Confirm that this unit is connected to the  
broadband Internet. (> 11)  
Connect this unit to the network by a wired  
connection.  
Confirm the “BD-Live Internet Access”  
settings. (> 26)  
Confirm a USB device is connected to the  
USB port. (> 15)  
¾
connection is being interrupted, change the  
position or angle of your wireless router and  
see if the connection state improves. If there  
is no improvement, connect to a wired  
network and perform the “Easy Network  
Setting” (> 12) again.  
VQT4V11  
32  
Specifications  
File format  
General  
File format  
Extension  
Reference  
This unit supports ID3  
tags, but only titles, artist  
names and album names  
can be displayed.  
Signal system  
NTSC  
MP3  
“.MP3”, “.mp3”  
Operating  
temperature range  
i5 oC to i35 oC  
(i41 oF to i95 oF)  
MOTION JPEG and  
Progressive JPEG are  
not supported.  
You may not be able to  
play back the file if you  
have edited the folder  
structure or the file  
name on a PC or other  
device.  
Operating humidity 10 % to 80 % RH  
range  
(no condensation)  
Output connector:  
Type A (19 pin) 1 system  
HDMI AV output  
USB slot  
JPEG  
“.JPG”, “.jpg”  
USB2.0: 1 system  
10BASE-T/100BASE-TX  
1 system  
Ethernet  
The video file and  
subtitles text file are  
inside the same folder,  
and the file names are  
the same except for the  
file extensions.  
Some MKV files may  
not play back,  
depending on the video  
resolution and frame  
rate condition.  
“.MKV”, “.mkv”  
Standard Compliance:  
IEEE802.11 b/g/n  
Frequency range:  
2.4 GHz band  
Subtitles text  
file  
“.SRT”, “.srt”,  
“.SSA”, “.ssa”,  
“.ASS”, “.ass”  
[BD89]  
Wireless LAN  
MKV  
Security:  
WPATM/WPA2TM  
(Encryption Type: TKIP/AES,  
Authentication Type: PSK),  
WEP (64 bit/128 bit)  
Maximum sampling rate:  
192 kHz/24 bit  
Class I LASER Product  
Wave length: 785 nm (CDs)/  
660 nm (DVDs)/405 nm (BDs)  
Laser power: No hazardous  
radiation is emitted with the  
safety protection  
FLAC  
WAV  
“.FLAC”, “.flac”  
“.WAV”, “.wav”  
Maximum sampling rate:  
192 kHz/24 bit  
LASER Specification  
This unit supports ID3  
tags.  
Maximum sampling rate:  
48 kHz/320 kbps  
“.M4A”, “.m4a”,  
“.AAC”, “.aac”  
AAC  
Power supply  
AC 120 V, 60 Hz  
Approx. 11 W  
Power consumption  
This unit supports ID3  
tags.  
Maximum sampling rate:  
48 kHz/355 kbps  
Power consumption Approx. 0.5 W  
in standby mode  
WMA  
“.WMA”, “.wma”  
Power consumption Approx. 3.5 W  
in quick start  
standby mode  
With certain recording states and folder structures, the play  
order may differ or playback may not be possible.  
Dimensions  
Approx. 330 mmk38 mmk179 mm  
(WkHkD)  
(Approx. 13zk1 1/2zk7 1/16z)  
Mass (Weight)  
Approx. 1.0 kg (2.2 lbs)  
Specifications are subject to change without notice.  
VQT4V11  
33  
Audio information  
Display languages list  
The audio output differs depending on the  
settings on the unit. (> 24, “Digital Audio Output”)  
The number of channels listed is the maximum  
possible number of output channels when  
connected to amplifier/receiver compatible with  
the respective audio format.  
Display Language Display Language Display Language  
ENG  
FRA  
DEU  
ITA  
ESP  
NLD  
SVE  
NOR  
DAN  
POR  
RUS  
English JPN  
French CHI  
German KOR  
Italian MAL  
Spanish VIE  
Dutch THA  
Japanese ARA  
Chinese HIN  
Korean PER  
Malay IND  
Vietnamese MRI  
Thai BUL  
Arabic  
Hindi  
Persian  
Indonesian  
Maori  
Bulgarian  
Romanian  
Greek  
Turkish  
Others  
Swedish POL  
Norwegian CES  
Danish SLK  
Portuguese HUN  
Russian FIN  
Polish RUM  
Czech GRE  
Slovak TUR  
Hungarian  
“Digital Audio Output”  
“PCM”*2*3  
Finnish  
“Bitstream”  
BD-Video :  
7.1ch PCM*1  
DVD-Video :  
5.1ch PCM  
Output  
channel  
Outputs using  
original audio*1  
Language code list  
*1  
When “BD-Video Secondary Audio” is set to “On”, the  
audio will be output as Dolby Digital, DTS Digital Surround  
or 5.1ch PCM.  
The maximum possible number of Dolby sound is 2ch PCM.  
When “DTS Neo:6” is set to “Cinema” or “Music”, 2ch  
(2.1ch) audio other than Dolby sound can be expanded to  
7ch (7.1ch) and output.  
Language Code Language Code Language Code  
*2  
*3  
Abkhazian:  
Afar:  
Afrikaans:  
Albanian:  
Amharic:  
Arabic:  
6566 Gujarati:  
6565 Hausa:  
6570 Hebrew:  
8381 Hindi:  
6577 Hungarian:  
6582 Icelandic:  
7185 Rhaeto-Romance:  
7265  
7387 Romanian:  
7273 Russian:  
7285 Samoan:  
7383 Sanskrit:  
8277  
8279  
8285  
8377  
8365  
Armenian:  
Assamese:  
Aymara:  
7289 Indonesian: 7378 Scots Gaelic: 7168  
Supported format for DLNA  
6583 Interlingua:  
6589 Irish:  
7365 Serbian:  
7165 Serbo-Croatian:8372  
8382  
Azerbaijani: 6590 Italian:  
7384 Shona:  
7465 Sindhi:  
7487 Singhalese: 8373  
8378  
8368  
File formats that are not supported by your  
DLNA server cannot be played.  
Bashkir:  
Basque:  
6665 Japanese:  
6985 Javanese:  
Bengali; Bangla:  
Kannada:  
Kashmiri:  
7578 Slovak:  
7583 Slovenian:  
7575 Somali:  
7589 Spanish:  
8375  
8376  
8379  
6983  
Video  
6678  
Bhutani:  
Bihari:  
Breton:  
Bulgarian:  
Burmese:  
6890 Kazakh:  
6672 Kirghiz:  
6682 Korean:  
6671 Kurdish:  
7789 Laotian:  
Video  
codec  
H.264  
H.264  
Audio  
codec  
Dolby Digital  
AAC  
Dolby Digital  
Linear PCM .mpeg  
Example of  
file extension  
.mts  
Container  
7579 Sundanese: 8385  
7585 Swahili:  
7679 Swedish:  
7665 Tagalog:  
8387  
8386  
8476  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
AVCHD  
MP4  
Byelorussian: 6669 Latin:  
Cambodian: 7577 Latvian, Lettish: 7686 Tajik:  
.mp4  
.mpg,  
Catalan:  
Chinese:  
Corsican:  
Croatian:  
Czech:  
6765 Lingala:  
9072 Lithuanian:  
6779 Macedonian: 7775 Telugu:  
7282 Malagasy:  
6783 Malay:  
7678 Tamil:  
7684 Tatar:  
PS  
TS  
MPEG2  
MPEG2,  
H.264  
AAC  
Dolby Digital  
.m2ts  
.ts  
7771 Thai:  
7783 Tibetan:  
Danish:  
Dutch:  
6865 Malayalam: 7776 Tigrinya:  
7876 Maltese:  
6978 Maori:  
6979 Marathi:  
6984 Moldavian:  
7079 Mongolian:  
7074 Nauru:  
7784 Tonga:  
7773 Turkish:  
7782 Turkmen:  
7779 Twi:  
7778 Ukrainian:  
7865 Urdu:  
Photo  
English:  
Esperanto:  
Estonian:  
Faroese:  
Fiji:  
Format  
JPEG  
Example of file extension  
.jpg  
Finnish:  
French:  
Frisian:  
Galician:  
Georgian:  
German:  
Greek:  
7073 Nepali:  
7082 Norwegian: 7879 Vietnamese: 8673  
7089 Oriya:  
7176 Pashto, Pushto:8083 Welsh:  
7565 Persian:  
6869 Polish:  
7869 Uzbek:  
Audio  
7982 Volapük:  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
Audio codec  
MP3  
Example of file extension  
7065 Wolof:  
8076 Xhosa:  
.mp3  
.flac  
.m4a  
.wma  
FLAC  
AAC  
WMA  
6976 Portuguese: 8084 Yiddish:  
Greenlandic: 7576 Punjabi:  
Guarani: 7178 Quechua:  
8065 Yoruba:  
8185 Zulu:  
Linear PCM  
VQT4V11  
34  
“AVCHD” is a trademark of Panasonic Corporation and Sony  
Corporation.  
This product incorporates the following software:  
(1) the software developed independently by or for Panasonic  
Corporation,  
Java is a registered trademark of Oracle and/or its affiliates.  
(2) the software owned by third party and licensed to Panasonic  
Corporation,  
(3) the software licensed under the GNU General Public License,  
Version 2.0 (GPL V2.0),  
Manufactured under license from Dolby Laboratories.  
Dolby and the double-D symbol are trademarks of Dolby  
Laboratories.  
(4) the software licensed under the GNU LESSER General Public  
License, Version 2.1 (LGPL V2.1), and/or  
(5) open source software other than the software licensed under  
the GPL V2.0 and/or LGPL V2.1.  
Manufactured under license under U.S. Patent Nos: 5,956,674;  
5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929;  
7,392,195; 7,272,567 & other U.S. and worldwide patents issued &  
pending.  
DTS-HD, the Symbol, & DTS-HD and the Symbol together are  
registered trademarks & DTS-HD Master Audio is a trademark of  
DTS, Inc. Product includes software.  
The software categorized as (3) - (5) are distributed in the hope  
that it will be useful, but WITHOUT ANY WARRANTY, without  
even the implied warranty of MERCHANTABILITY or FITNESS  
FOR A PARTICULAR PURPOSE. Please refer to the detailed  
terms and conditions thereof shown in the Player Settings menu.  
© DTS, Inc. All Rights Reserved.  
HDMI, the HDMI Logo, and High-Definition Multimedia Interface  
are trademarks or registered trademarks of HDMI Licensing LLC in  
the United States and other countries.  
At least three (3) years from delivery of this product, Panasonic will  
give to any third party who contacts us at the contact information  
provided below, for a charge no more than our cost of physically  
performing source code distribution, a complete machine-readable  
copy of the corresponding source code covered under GPL V2.0,  
LGPL V2.1 or the other licenses with the obligation to do so, as  
well as the respective copyright notice thereof.  
This product is licensed under the AVC patent portfolio license and  
VC-1 patent portfolio license for the personal and non-commercial  
use of a consumer to (i) encode video in compliance with the AVC  
Standard and VC-1 Standard (“AVC/VC-1 Video”) and/or (ii)  
decode AVC/VC-1 Video that was encoded by a consumer  
engaged in a personal and non-commercial activity and/or was  
obtained from a video provider licensed to provide AVC/VC-1  
Video. No license is granted or shall be implied for any other use.  
Additional information may be obtained from MPEG LA, LLC.  
Contact Information: [email protected]  
The source code and the copyright notice are also available for  
free in our website below.  
Adobe Flash Lite for Digital Home Software licensed by Adobe  
Systems Incorporated or its affiliates.  
MPEG Layer-3 audio coding technology licensed from Fraunhofer  
IIS and Thomson.  
For Adobe Flash Lite for Digital Home Software (“Flash Software”),  
please be aware of the following.  
(i) You are not permitted to distribute and copy this Flash  
Software to any third party,  
(ii) You are not permitted to modify the Flash Software and create  
derivative works of the Flash Software,  
(iii) You are not permitted to decompile, reverse engineer,  
disassemble and otherwise reduce the Flash Software to a  
human-perceivable form,  
(iv) You are not permitted to claim any damages, including direct,  
indirect, special, incidental, punitive, and consequential  
damages arising out of or in connection with the Flash  
Software,  
(v) You fully agree that the ownership of the Flash Software is that  
of Panasonic Corporation and/or its suppliers or licensors,  
(vi) You agree and acknowledge that it is possible that you cannot  
access the contents unless you do not obtain and install the  
latest version of the Flash Software.  
“DVD Logo” is a trademark of DVD Format/Logo Licensing  
Corporation.  
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi  
Alliance.  
The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.  
“Wi-Fi”, “Wi-Fi Protected Setup”, “WPA” and “WPA2” are marks or  
registered marks of the Wi-Fi Alliance.  
DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks,  
service marks, or certification marks of the Digital Living Network  
Alliance.  
Windows is a trademark or a registered trademark of Microsoft  
Corporation in the United States and other countries.  
VQT4V11  
35  
(1) MS/WMA  
This product is protected by certain intellectual property rights of  
Microsoft Corporation and third parties. Use or distribution of such  
technology outside of this product is prohibited without a license  
from Microsoft or an authorized Microsoft subsidiary and third  
parties.  
(2) MS/PlayReady/Final Product Labeling  
This product contains technology subject to certain intellectual  
property rights of Microsoft. Use or distribution of this technology  
outside of this product is prohibited without the appropriate  
license(s) from Microsoft.  
(3) MS/PlayReady/End User Notices  
Content owners use Microsoft PlayReadyTM content access  
technology to protect their intellectual property, including  
copyrighted content. This device uses PlayReady technology to  
access PlayReady-protected content and/or WMDRM-protected  
content. If the device fails to properly enforce restrictions on  
content usage, content owners may require Microsoft to revoke the  
device’s ability to consume PlayReady-protected content.  
Revocation should not affect unprotected content or content  
protected by other content access technologies. Content owners  
may require you to upgrade PlayReady to access their content. If  
you decline an upgrade, you will not be able to access content that  
requires the upgrade.  
(4) FLAC, WPA Supplicant  
The software licenses are displayed when “License” in the Setup  
menu is selected. (> 27)  
Copyright 2004-2010 Verance Corporation. CinaviaTM is a Verance  
Corporation trademark. Protected by U.S. Patent 7,369,677 and  
worldwide patents issued and pending under license from Verance  
Corporation. All rights reserved.  
VQT4V11  
36  
Limited Warranty  
(ONLY FOR U.S.A. AND PUERTO RICO)  
Panasonic Consumer Marketing Company of North America,  
Division of Panasonic Corporation of North America  
One Panasonic Way, Secaucus, New Jersey 07094  
Panasonic Products Limited Warranty  
Limited Warranty Coverage (For USA and Puerto Rico Only)  
If your product does not work properly because of a defect in materials or  
workmanship, Panasonic Consumer Marketing Company of North America  
(referred to as “the warrantor”) will, for the length of the period indicated on the  
chart below, which starts with the date of original purchase (“warranty period”),  
at its option either (a) repair your product with new or refurbished parts, (b)  
replace it with a new or a refurbished equivalent value product, or (c) refund  
your purchase price. The decision to repair, replace or refund will be made by  
the warrantor.  
commercial use such as hotel, office, restaurant, or other business or rental use  
of the product, or service by anyone other than a Factory Service Center or  
other Authorized Servicer, or damage that is attributable to acts of God.  
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER  
“LIMITED WARRANTY COVERAGE”.  
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR  
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS  
PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.  
(As examples, this excludes damages for lost time, travel to and from the  
servicer, loss of or damage to media or images, data or other memory or  
recorded content. The items listed are not exclusive, but for illustration only.)  
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY  
OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED  
WARRANTY.  
Product or Part Name  
Parts  
Labor  
Blu-ray Disc Player  
1 Year  
90 Days  
All included Accessories  
(Except Non-Rechargeable Batteries)  
90 Days  
10 Days  
Not Applicable  
Not Applicable  
Some states do not allow the exclusion or limitation of incidental or  
consequential damages, or limitations on how long an implied warranty lasts, so  
the exclusions may not apply to you.  
Only Non-Rechargeable Batteries  
During the “Labor” warranty period there will be no charge for labor. During the  
“Parts” warranty period, there will be no charge for parts. This Limited Warranty  
excludes both parts and labor for non-rechargeable batteries, antennas, and  
cosmetic parts (cabinet). This warranty only applies to products purchased and  
serviced in the United States or Puerto Rico. This warranty is extended only to  
the original purchaser of a new product which was not sold “as is”.  
This warranty gives you specific legal rights and you may also have other rights  
which vary from state to state. If a problem with this product develops during or  
after the warranty period, you may contact your dealer or Service Center. If the  
problem is not handled to your satisfaction, then write to the warrantor’s  
Consumer Affairs Department at the addresses listed for the warrantor.  
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED  
WARRANTY, ARE YOUR RESPONSIBILITY.  
Mail-In Service  
For assistance in the U.S.A. and Puerto Rico in obtaining repairs, please ship  
the product prepaid to:  
Panasonic Exchange Center  
Customer Services Directory (United States and Puerto Rico)  
4900 George McVay Drive  
Suite B  
Obtain Product Information and Operating Assistance; locate your  
nearest Dealer or Service Center; purchase  
Parts and Accessories; or make Customer Service and  
Literature requests by visiting our Web Site at:  
or, contact us via the web at:  
You may also contact us directly at:  
McAllen, TX 78503  
Online Repair Request  
To submit a new repair request and for quick repair status visit our Web Site at  
When shipping the unit, carefully pack, include all supplied accessories listed in  
the Owner’s Manual, and send it prepaid, adequately insured and packed well in  
a carton box. When shipping Lithium Ion batteries please visit our Web Site at  
the most up to date information. Include a letter detailing the complaint, a return  
address and provide a daytime phone number where you can be reached. A  
valid registered receipt is required under the Limited Warranty.  
1-800-211-PANA (7262)  
Monday-Friday 9am-9pm,  
Saturday-Sunday 10am-7pm EST  
For hearing or speech impaired TTY users, TTY: 1-877-833-8855  
Accessory Purchases (United States and Puerto Rico)  
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE  
PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/  
PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID  
AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE  
REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF  
PURCHASE.  
Purchase Parts, Accessories and Instruction Books online for all Panasonic  
Products by visiting our Web Site at:  
Or, send your request by E-mail to:  
Limited Warranty Limits And Exclusions  
You may also contact us directly at:  
This warranty ONLY COVERS failures due to defects in materials or  
workmanship, and DOES NOT COVER normal wear and tear or cosmetic  
damage. The warranty ALSO DOES NOT COVER damages which occurred in  
shipment, or failures which are caused by products not supplied by the  
warrantor, or failures which result from accidents, misuse, abuse, neglect,  
mishandling, misapplication, alteration, faulty installation, set-up adjustments,  
misadjustment of consumer controls, improper maintenance, power line surge,  
lightning damage, modification, introduction of sand, humidity or liquids,  
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)  
(Monday-Friday 9am-9pm EST)  
Panasonic National Parts Center  
20421 84th Ave S., Kent, WA 98032  
(We accept Visa, MasterCard, Discover Card, American Express)  
For hearing or speech impaired TTY users, TTY: 1-866-605-1277  
As of October 2012  
User memo:  
DATE OF PURCHASE  
DEALER NAME  
The model number and serial number of this product can be  
found on either the back or the bottom of the unit.  
Please note them in the space provided below and keep for  
future reference.  
DEALER ADDRESS  
TELEPHONE NUMBER  
MODEL NUMBER  
SERIAL NUMBER  
VQT4V11  
37  
Limited Warranty (Only for CANADA)  
Panasonic Canada Inc.  
5770 Ambler Drive, Mississauga, Ontario L4W 2T3  
PANASONIC PRODUCT - LIMITED WARRANTY  
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use  
and for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product  
with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your  
purchase price. The decision to repair, replace or refund will be made by Panasonic Canada Inc.  
Technics Audio Product - One (1) year, parts and labour  
Panasonic BD/DVD Product - One (1) year, parts and labour  
Panasonic Audio Receivers - One (1) year, parts and labour  
Home Theater Systems Product - One (1) year, parts and labour  
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic  
brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in  
Canada, which product was not sold “as is”, and which product was delivered to you in new condition in the original  
packaging.  
IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR  
OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS  
REQUIRED  
LIMITATIONS AND EXCLUSIONS  
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal  
wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or  
failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents,  
misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment  
of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand,  
humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or  
service by anyone other than an Authorized Servicer, or damage that is attributable to acts of God.  
Dry cell batteries are also excluded from coverage under this warranty.  
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,  
INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR  
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY  
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time,  
travel to and from the Authorized Servicer, loss of or damage to media or images, data or other memory or recorded  
content. This list of items is not exhaustive, but for illustration only.)  
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages,  
or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty  
gives you specific legal rights and you may have other rights which vary depending on your province or territory.  
WARRANTY SERVICE  
For product operation and information assistance, please contact:  
PRODUCT OPERATION ASSISTANCE  
Customer Care Centre:  
Telephone #: 1-800-561-5505  
Fax #: (905) 238-2360  
Email link: “Support # contact us # email” on www.panasonic.ca  
PRODUCT REPAIRS  
Please locate your nearest Authorized Servicentre.  
Link: “Support # Panasonic Servicentre® locator” on www.panasonic.ca  
IF YOU SHIP THE PRODUCT TO A SERVICENTRE  
Carefully pack and send prepaid, adequately insured and preferably in the original carton.  
Include details of the defect claimed, and proof of date of original purchase.  
VQT4V11  
38  
Referencia rápida en español  
Reproducción básica  
(Spanish Quick Reference)  
Preparación  
Encienda el televisor y seleccione la entrada de  
vídeo adecuada en el televisor.  
Conexiones básicas  
Conexión a un televisor  
compatible con HDMI  
1 Pulse [Í] para encender la unidad.  
Después de conectar su nuevo reprodutor y  
pulsar el botón de encendido, aparecerá la  
pantalla de la configuración básica.  
Cable HDMI  
HDMI IN  
2 Inserte el medio.  
Inicia la reproducción  
Pulse [1PLAY].  
Conexión a un televisor  
compatible con HDMI y a un  
amplificador/receptor  
compatible con HDMI  
Parada  
Pulse [STOP].  
La posición de detención se memoriza.  
Función de reanudación de la reproducción  
Pulse  
desde esta posición.  
[1PLAY] para reiniciar la reproducción  
Cable HDMI  
HDMI IN  
(ARC)  
La posición se borra si se abre la bandeja.  
En los discos BD-Video incluidos los BD-J, la función  
de reanudación de la reproducción no funciona.  
HDMI OUT  
HDMI IN  
(ARC)  
Pausa  
Amplificador/  
Receptor  
Pulse [;PAUSE].  
Pulse [;PAUSE] otra vez o [1PLAY] para reiniciar la  
reproducción.  
Conecte el cable de  
alimentación de CA por  
último  
Búsqueda/Cámara lenta  
Búsqueda  
A una toma de corriente doméstica  
Durante la reproducción, pulse [SEARCH6]  
o [SEARCH5].  
Cámara lenta  
Durante la pausa, pulse [SEARCH5].  
Cable de alimentación de CA (incluido)  
La velocidad aumenta hasta 5 pasos.  
Música y MP3, etc.: La velocidad está fija en un paso.  
Pulse [1PLAY] para recuperar la velocidad de  
reproducción normal.  
Conéctelo cuando haya realizado el resto de conexiones.  
Ahorro de energía  
Esta unidad consume una pequeña cantidad de  
energía aunque esté ajustada en el modo de  
espera (Accionamiento rápido : Desactivado,  
aprox. 0,5 W). Para ahorrar energía cuando no  
vaya a utilizar la unidad durante mucho tiempo,  
desenchúfela de la toma de corriente.  
Salto  
Durante la reproducción o la pausa, pulse  
[:] o [9].  
Salta hasta el título, capítulo o pista que desee  
reproducir.  
VQT4V11  
39  
Index  
Changing audio . . . . . .17  
Language . . . . . . . .25, 34  
B BD-Live . . . . . . . . . . . . . .18  
A Audio  
W Wireless LAN . . . . . . . . 11  
M Media Renderer . . . . . . 20  
Multi User Mode. . . . . . . 16  
N Network  
24p . . . . . . . . . . . . . . . 23, 24  
Connection . . . . . . . . . 11  
Setting . . . . . . . . . 12, 25  
Network Service . . . . . . .19  
D DLNA . . . . . . . . . . . . . . . .20  
F File format. . . . . . . . . . . .33  
Firmware update . . . . . . . 14  
H HDMI CEC . . . . . . . . . . . .21  
L LAN . . . . . . . . . . . . . . . . .11  
P
Pop-up menu . . . . . . . . . .18  
Q Quick Start . . . . . . . . . . 27  
R Restore Default  
Language  
Settings . . . . . . . . . . . . . 27  
Audio . . . . . . . . . . . . . .25  
Menu . . . . . . . . . . . . . .25  
On-screen. . . . . . . . . . .25  
Soundtrack . . . . . . . . . .22  
Subtitle . . . . . . . . . .22, 25  
Resume play function . . .17  
S Subtitle . . . . . . . . . . . . . 22  
U USB device . . . . . . . . . . . 7  
USA Only: Disposal may be regulated in your community due to environmental considerations. For  
disposal or recycling information, please visit Panasonic website:  
or call 1-888-769-0149.  
As an ENERGY STAR® Partner, Panasonic  
has determined that this product meets the  
ENERGY STAR® guidelines for energy  
efficiency.  
For Canada only: The word “Participant” is  
used in place of the word “Partner”.  
Panasonic Consumer Marketing  
Company of North America,  
Panasonic Canada Inc.  
pr  
5770 Ambler Drive,  
Division of Panasonic Corporation Mississauga, Ontario L4W 2T3  
of North America  
One Panasonic Way, Secaucus, New  
Jersey 07094  
VQT4V11  
F1212SA0  
C Panasonic Corporation 2012  
Printed in China  

Ricoh A12 User Manual
Pyramid Car Audio PB1281X User Manual
Philips SJM3200 User Manual
Pelco Camera Lens 13ZD6X8(P) (CE) User Manual
Panasonic AW E860N User Manual
Olympus Comedia D 390 User Manual
Nikon 10x70IF HP WP User Manual
Munchkin Baby Food Grinder User Manual
Kodak DOUBLE X AEROGRAPHIC AS 75 User Manual
Kodak D830 User Manual