E X E C U T I V E
M a e s t r o 2 - i n - 1 F o o d P r o c e s s o r
SABS
IEC60355
Model:
2 6 2 1 0
5 0 0 W
PLEASE READ ALL INSTRUCTIONS BEFORE USE
2 y e a r g u a r a n t e e
IMPORTANT SAFETY INSTRUCTIONS
-
-
-
-
-
·
not to leave the appliance exposed to
atmospheric agents (sun,rain…)
not to allow children or incapable persons to
use the appliance
never to tug on the lead or appliance itself to
unplug from the outlet
not to leave the appliance plugged into the
main power supply unattended
never to submerge the appliance in water or in
other liquids.
The user must not replace the appliance lead.
Contact a professionally qualified person in
case of need.
Switch off and do not mishandle the appliance
if it should breakdown and/or work badly.
Contact a authorized Service Centre for
eventual repairs, asking for original spares.
Put the appliance out of service at the end
or its service life by cutting off the lead after
unplugging from the outlet. Abide by local
existing rules and regulations for its disposal.
Our company may not be held liable for
eventual damages to persons, animals or
objects caused by incorrect installation
or deriving from improper, erroneous or
unreasonable use.
·
·
·
Please read this handbook as it gives
important instructions about safety, use and
maintenance of your appliances and keep it
safe for future reference.
Do not leave parts of packaging (plastic bags,
foam polystyrene, nails, etc.)within reach of
children or incapable persons as they are
potential sources of danger.
Make sure the data on the appliance rating
plate corresponds to that of the main power
supply and of your electrical system before
plugging into the outlet. In case of doubt,
contact professionally qualified personnel.
It is advisable not to use adapters, multiple
plugs and extensions. Use devices certified
and confirming to existing safety standards
only should it be absolutely necessary, making
sure they are compatible with your electrical
system and with the appliance technical data.
Noise emission level of operation is at 95dB(A).
Any installation not conforming to instructions
may endanger your safety and forfeit the
guarantee.
·
·
·
·
·
·
·
The appliance must be used for the purpose
for which it was designed only, i.e. preparing
food for domestic use.
·
Do not use continuously for more than
30 seconds. Allow a rest period between
operations for the same time period.
·
For safety’s sake be careful:
-
not to use the appliance with bare feet or wet
hands or feet
-
not to use the appliance anywhere other than
domestic environment
BEFORE USE
-
Read this handbook to familiarize yourself with
all the parts of your new food processor.
Clean all the parts and accessories in contact
with food before using the appliance for the
first time (see paragraph “Cleaning”).
-
Warning! Always take care when you are
handling the blades to fit them on, taking
them out of the bowl (B1) after preparing
the food and when cleaning them, as they
are very sharp.
•
Do not operate without the cover in place.
OPERATING INSTRUCTIONS
Your new food processor will help you to prepare
a lot of basic mixtures that you can use for your
recipes.
Please abide by the following instructions to
achieve the best results and to keep your
appliance in good working condition.
Attention! Never exceed the maximum
quantities below and never pour liquids hotter
than 75°C into the bowl and/or blender
Follow the instructions given below every time you
use it:
-
Put the blade support on the axis in the middle of
the bowl, and press it to the bottom. Then fix the
chopping blade to the blade support, as shown in
Diagram 4 & 5.
-
Never leave the appliance unattended while it is
on.
-
-
-
Never make the appliance work while it is empty.
Never touch the moving parts.
Never put your fingers or utensils inside the lid
opening.
-
-
Never press down the ingredients into the lid
opening with your hands.
Warning: The blade is sharp. Please only hold the
plastic part while using.
Do not use the appliance to work hard ingredients
(e.g, frozen meat, crusts of cheese…), rubbery
(e.g.candied peel…), uneatable parts of
ingredients (e.g. bones,, fishbones…)or crush ice.
Do not remove the lid and never replace
accessories without switching off the appliance
and if the accessory being used has not stopped
working.
-
Put the food (eg. Meet) into the bowl, as shown
in Diagram 6. Big piece food needs to be cut into
small pieces. ( 2 cm x 2 cm x 2 cm).
-
-
-
-
Put the cover on the bowl, and turn it until hearing
the chattering sound, as shown in Diagram7.
Fix the plug to the electric socket, Turn the knob
to the required level, as shown in Diagram 8.
(The speed is increased by levels. PULSE is the
highest level . Turn the knob to the PULSE for any
intermittent operation. )
Do not remove the ingredients from the bowl
before removing the blade
A: Mixing Bowl
I. Chopping Function
-
When the chopping is finished, Turn the knob
to the “0”. After the blade stops, pour out the
food.
-
-
put the protect cover onto the body tightly ,as
shown in Diagram 1
II. Whisking Function
put the plastic bowl on power unit and turn
the handle in clock-wise direction, as shown in
Diagram 2 & 3
Mixing function has almost the same operating
steps as chopping function. Only change the
chopping blade to shredding blade. It is used for
mixing and whisking of food, eg, egg, soup.
III. Slicing & Shredding Function
-
Put the protect cover onto the body tightly;
Fix the slicing/shredding knife to the knife support,
as shown in Diagram 9. Slicing knife makes the
food into slices. Shredding knife make the food
into shreds.
-
-
Put the bowl on the power unit first, then turn
the bowl in clock-wise direction, until hearing the
chattering sound. Then put the knife support on
the axis in the middle of the bowl, as shown in
Diagram 10.
B: Blender jug
-
Put the bowl on the power unit first, Then turn
the bowl in clock-wise direction, until hearing the
chattering sound; Put the cover on the bowl, and
turn it until hearing the chattering sound.
-
Place the ingredients into the Blender jug and fix
the Blender jug cover onto the body tightly
-
Put the cover on the bowl, and turn it until hearing
the chattering sound. Then fix the plug to the
electric socket, turn the switch to choose the level.
Place the strips of food through the bowl cover,
and push the food down slowly, When the food
strip is short, push them down with the measuring
cup, as shown in Diagram 11&12.
-
-
Put Blender jug on the power unit till cup support
connect with power unit properly.
Connect the power plug of the machine and
switch on the food processor. Turn the knob to the
required level. The speed is increased by levels.
PULSE is the highest level . Turn the knob to the
PULSE for any intermittent operation.
-
-
You can add some liquid material ( such as oil,
cream if any ) to the food when mixing from
material entrance if necessary;
Turn the knob to “0” level and shut off the
machine after working. Pour the mixed food out of
the Blender jug.
-
When the operation is finished, Turn the knob
to the“0”. After the blade stops completely,
pure out the food.
IV. Juicing Function
1
Put the bowl on the power unit first, then turn
the bowl in clock wise direction, until hearing
the chattering sound. Then fix the filtrating plate
and juice drill to the bowl, as shown in Diagram
13&14.
2
3
4
Fix the plug to the electric socket, turn the switch
to 1
Cut the citrus fruit in half, then press the cut side
slowly onto the juice drill, as shown in Diagram15.
Pure out the juice, and mix with seasoning as you
like.
INGREDIENTS LIST
• BLENDER JUG
FUNCTION
INGREDIENT
MAX QTY.
MAX TIMES (s)
SLICING
SHREDDING
50s
50s
50s
30s
30s
30s
SLICING
&
MURPHY
MELON
400g
400g
SHREDDING
CARROT
MEAT
400g
300g (±10g/piece)
300g (±15g/piece)
400g (± 20g/piece)
six yolks
30s
30s
30s
25s
25s
20s
20s
20s
20s
HAM
ONIONS
EGG
CHOPPING
&
STRAWBERRY
CHEESE
ALMONDS
HAZELNUTS
WALNUTS
200g
WHISKING
100g
100g
100g
100g
INGREDIENTS LIST
• BOWL
MATERIAL
apple
MAX QTY
250g
MAX TIMES (s)
30s
30s
30s
30s
orange
300g
grape
250g
strawberry
250g
CLEANING
-
-
Always unplug from power outlet before any cleaning jobs.
Clean the Power Unit (6) with a soft slightly damp cloth. Do not wash it under running water and do
not submerge it in water or other liquids.
-
-
All accessories can be washed by hand or in the dishwasher:
for hand washing use tepid water and normal washing up detergent, being careful of the steel blade
as it is very sharp;
-
Washing in the dishwasher-place accessories in the upper part and make sure the water never
exceeds maximum temperature of 50°C
Do not use chemical or abrasive substances.
Note! When you have finished cleaning make sure the parts controlled by the bowl safety system
(motor unit at the point where the lip of the lid fits into place)and for models with blender
jugs (jug housing on the motor unit, blender jug and lid), are not obstructed by solid waste. If
necessary use a soft brush to clean eventual residuals with the appliance unplugged from the
mains.
-
-
The blades cannot be sharpened. Replace them if they are not cutting properly or are worn.
Contact an authorized Service Centre to purchase accessories, parts liable to wear and for
maintenance work on your appliance.
STORAGE
-
-
Make sure your appliance and all its accessories are completely dry before putting them away.
Your food processor has a space-saving storage system where all accessories can be put away tidily
in the bowl..
Attention! To avoid damages never use the appliance with accessories still inside.
18 Jig Avenue Montague Gardens Cape Town
P.O. Box 37153 Chempet 7442 South Africa
Tel: +27 21 551 5760 Fax: +27 21 551 1189
Service Centre Share Call: 086 111 5006
w e b : w w w. c r e a t i v e h o u s e w a r e s . c o . z a
|