INFORMATION (For U.S.A.)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
KW-XR418
CD RECEIVER : INSTRUCTIONS/INSTALLATION
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to
ensure your complete understanding and to obtain the best
possible performance from the unit.
Caution:
For customer Use:
Enter below the Model No. and Serial No. which are located
on the top or bottom of the cabinet. Retain this information
for future reference.
Changes or modifications not approved by JVC could void the user’s authority to operate the equipment.
IMPORTANT FOR LASER PRODUCTS
1.CLASS 1 LASER PRODUCT
2.CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all
servicing to qualified service personnel.
Model No.
Serial No.
3.CAUTION: (For U.S.A.) Visible and/or invisible class II laser radiation when open. Do not stare into beam.
(For Canada) Visible and/or invisible class 1M laser radiation when open. Do not view directly
with optical instruments.
0110DTSMDTJEIN
EN
© 2010 Victor Company of Japan, Limited
GET0655-001B
[J]
4.REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
Canceling the display demonstration
1 Turn on the power.
4 Select <DEMO OFF>.
For safety...
• Do not raise the volume level too much, as this will
[European Union only]
block outside sounds, making driving dangerous.
• Stop the car before performing any complicated
operations.
2
5
[Hold]
(Initial setting)
Warning:
Temperature inside the car...
If you have parked the car for a long time in hot or
cold weather, wait until the temperature in the car
becomes normal before operating the unit.
3
6 Finish the procedure.
If you need to operate the unit while driving, be sure
to look around carefully or you may be involved in a
traffic accident.
Setting the clock
1 Turn on the power.
Basic operations
5 Adjust the hour.
Ejects the disc
Selects preset station.
Loading slot
2
6 Adjust the minute.
[Hold]
(Initial setting)
3 Select <CLOCK>.
7 Finish the procedure.
4 Select <CLOCK SET>.
USB (Universal Serial
Bus) input terminal
Control dial
Preparations
Auxiliary input jack
Display window
Replacing the lithium coin battery
How to reset your unit
CR2025
Reset the unit after installation is
Remote sensor
• DO NOT expose to bright sunlight.
completed.
• Your preset adjustments will
also be erased.
When you press or hold the following button(s)...
Main unit Remote controller
General operations
For USA-California Only:
Turns on.
How to forcibly eject a disc
This product contains a CR Coin Cell Lithium Battery
which contains Perchlorate Material—special
handling may apply.
• When the power is on, pressing /I/ATT on the remote controller
also mutes the sound or pauses. Press /I/ATT again to cancel
muting or resume playback.
[Hold]
Turns off if pressed and held.
• You can forcibly eject the loaded disc even if the
disc is locked. To lock/unlock the disc, see page 2.
• Be careful not to drop the disc when it ejects.
• If this does not work, reset your unit.
Selects the available sources (if the power is turned on).
• If the source is ready, playback also starts.
Caution:
• Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent
type.
Adjusts the volume level.
Selects items.
• Battery shall not be exposed to excessive heat such
as sunshine, fire, or the like.
—
—
Preparing the remote controller
(RM-RK50)
• Mutes the sound while listening to a source. If the source is “CD” or
“USB,” playback pauses. Press the control dial again to cancel muting
or resume playback.
When you use the remote controller for the first time,
pull out the insulation sheet.
Warning (about battery handling)
To prevent accidents and damage:
• Do not install any battery other than CR2025 or its
equivalent.
• Store out of reach of children.
• Do not recharge, short, or dismantle.
• Do not dispose of in fire.
• Do not carry around with other metallic materials.
• Wrap the battery with tape and insulate when
throwing away or saving it.
• Confirms selection.
Selects the sound mode.
• Enters tone level adjustment directly (see page 3) if pressed and held
EQ BASS-TRE on the main unit.
Insulation sheet
—
Enters playback mode menu directly (see page 2).
Returns to the previous menu.
If the effectiveness of the remote controller
decreases, replace the battery.
—
—
This unit is equipped with the steering wheel remote control function.
Before operating, connect an exclusive remote adapter (not supplied) which matches your car to the steering
wheel remote input terminal on the rear of the unit.
Power off : Checks the current clock time.
Power on : Changes the display information.
• For details, refer also to the instructions supplied with the remote adapter.
1
Selecting a preset sound mode
You can select a preset sound mode suitable for the music genre.
FLAT NATURAL DYNAMIC
VOCAL BOOST BASS BOOST
USER (back to the beginning)
Storing your own sound mode
Sound element
Level
60 Hz, 80 Hz, 100 Hz, –06 to +06
200 Hz
Tone
=
=
=
=
You can store your own adjustments in memory.
Frequency
Q
=
BASS
Q1.0, Q1.25,
Q1.5, Q2.0
1
=
[Hold]
MIDDLE
TREBLE
0.5 kHz, 1.0 kHz,
1.5 kHz, 2.5 kHz
–06 to +06
Q0.75, Q1.0,
Q1.25
While listening, you can adjust the tone level of the selected sound
mode.
2
10.0 kHz, 12.5 kHz,
15.0 kHz, 17.5 kHz
–06 to +06
Q FIX
1
[Hold]
]
<PRO EQ>
]
<BASS> / <MIDDLE> / <TREBLE>
2
3
Adjust the level (–06 to +06) of the selected tone (BASS / MID /
TRE).
The sound mode is automatically stored and changed to “USER.”
Adjust the sound elements of the selected tone (see table on
the right).
Repeat steps 2 and 3 to adjust other tones.
The adjustments made will be stored automatically in “USER.”
4
The current sound mode changes to “USER” automatically.
Menu operations
Repeat step 2 if necessary.
• To return to the previous menu, press BACK
• To exit from the menu, press DISP or MENU
1
2
3
Category Menu item
Selectable setting, [Initial: Underlined]
.
[Hold]
FADER *3
BALANCE *4 L06 – R06 [ 00 ]
R06 – F06 [ 00 ]
: Adjust the front and rear speaker output balance.
: Adjust the left and right speaker output balance.
.
LOUD
• LOUD ON
: Boost low and high frequencies to produce a well-
balanced sound at a low volume level.
: Cancels.
Category Menu item
Selectable setting, [Initial: Underlined]
DEMO
• DEMO ON
: Display demonstration will be activated automatically if
no operation is done for about 20 seconds.
: Cancels.
• LOUD OFF
VOL ADJUST VOL ADJ –05 —
VOL ADJ +05
: Preset the volume adjustment level of each source
(except FM), compared to the FM volume level. The
volume level will automatically increase or decrease when
you change the source.
• DEMO OFF
CLOCK SET
[ 1:00 ]
: Adjust the hour, then the minute.
[ VOL ADJ 00 ]
• Before making an adjustment, select the source you
want to adjust.
BASS
—
: For settings, see “Storing your own sound mode.”
• “VOL ADJ FIX” appears on the display if “FM” is selected
as the source.
MIDDLE
TREBLE
DIMMER
L/O MODE
• SUB.W
: Select if the REAR LINE OUT terminals are used for
connecting a subwoofer (through an external amplifier).
: Select if the REAR LINE OUT terminals are used for
connecting the speakers (through an external amplifier).
• DIMMER ON
• DIMMER OFF
: Dims the display and button illumination.
: Cancels.
• REAR
SCROLL *1
• SCROLL ONCE
• SCROLL AUTO
• SCROLL OFF
: Scrolls the displayed information once.
: Repeats scrolling (at 5-second intervals).
: Cancels.
SUB.W
FREQ *5
• LOW
• MID
• HIGH
: Frequencies lower than 72 Hz are sent to the subwoofer.
: Frequencies lower than 111 Hz are sent to the subwoofer.
: Frequencies lower than 157 Hz are sent to the subwoofer.
Pressing DISP for more than one second can scroll the display regardless of the
setting.
SUB.W
LEVEL *5
SUB.W 00 —
SUB.W 08
[ SUB.W 04 ]
: Adjust the subwoofer output level.
TAG
DISPLAY
• TAG ON
: Shows the Tag information while playing MP3/WMA
tracks.
: Cancels.
• TAG OFF
BEEP
• BEEP ON
• BEEP OFF
: Activates the keypress tone.
: Deactivates the keypress tone.
SSM *2
• SSM 01 – 06
• SSM 07 – 12
• SSM 13 – 18
: For settings, see “Automatic presetting (FM)—SSM
(Strong-station Sequential Memory)” on page 2.
AMP GAIN*6 • LOW POWER
: VOLUME 00 – VOLUME 30 (Select if the maximum power
of each speaker is less than 50 W to prevent damaging the
speakers.)
AREA
• AREA US
• AREA EU
• AREA SA
: When using in North/Central/South America. AM/FM
intervals are set to 10 kHz/200 kHz.
: When using in any other areas. AM/FM intervals are set
to 9 kHz/50 kHz (100 kHz during auto search).
: When using in South American countries where FM
interval is 100 kHz. AM interval is set to 10 kHz.
: VOLUME 00 – VOLUME 50
• HIGH POWER
AM *7
• AM ON
• AM OFF
: Enable “AM” in source selection.
: Disable “AM” in source selection.
AUX IN *8
• AUX ON
• AUX OFF
: Enable “AUX IN” in source selection.
: Disable “AUX IN” in source selection.
MONO *2
• MONO ON
: Activate monaural mode to improve FM reception, but
stereo effect will be lost. (See page 2.)
: Restore the stereo effect.
1
2
3
4
5
6
*
*
*
*
*
*
Some characters or symbols will not be shown correctly (or will be blanked) on the display.
Displayed only when the source is “FM.”
If you are using a two-speaker system, set the fader level to “00.”
This adjustment will not affect the subwoofer output.
Displayed only when <L/O MODE> is set to <SUB.W>.
The volume level automatically changes to “VOLUME 30” if you change to <LOW POWER> with the volume level
is set higher than “VOLUME 30.”
• MONO OFF
IF BAND
• AUTO
: Increases the tuner selectivity to reduce interference
noises between adjacent stations. (Stereo effect may be
lost.)
: Subject to interference noises from adjacent stations,
but sound quality will not be degraded and the stereo
effect will remain.
• WIDE
7
8
*
*
Displayed only when any source other than “AM” is selected.
Displayed only when any source other than “AUX IN” is selected.
3
Installation
This unit is designed to operate on 12 V DC, NEGATIVE ground
electrical systems. If your vehicle does not have this system, a
voltage inverter is required, which can be purchased at JVC car
audio dealers.
Prepare these before installation....
(B) Installing with the mounting brackets from the car
Audio system originally
installed in the car
Warnings
• To prevent short circuits:
–Disconnect the battery’s negative terminal and make all electrical connections before installing the unit.
–Cover the terminals of the UNUSED leads with insulating tape.
• Be sure to ground this unit to the car’s chassis again after installation.
• Replace the fuse with one of the specified rating.
• Connect speakers with a maximum power of more than 50 W (impedance of 4 Ω to 8 Ω). Otherwise,
change the <AMP GAIN> setting. (See “Menu operations: <AMP GAIN>” on page 3.)
• The heat sink becomes very hot after use. Be careful not to touch it when removing this unit.
Car dashboard
Firmly attach the ground wire to the metallic
body of the car using the screw originally
fixed to the metallic body of the car.
Heat sink
Parts List
A
B
C
D
Sleeve (fitted to the main unit when shipped)....1
Brackets (fitted to the main unit when shipped) 2
* Flat countersunk screws—M5 × 8 mm (3/8”).......8
* Round head screws—M2.6 × 3 mm (1/8”).............4
E
F
G
Round head screws—M5 × 8 mm (3/8”)....8
Power cord.....................................................................1
Trim plate........................................................................1
* Four of these screws are fitted to the main unit when shipped.
Keep these screws for installation use if necessary.
The following illustration shows a typical installation. If you have any questions or require information
regarding installation kits, consult your JVC car audio dealer or a company supplying kits.
Mounting bracket
removed from the car
In-dash mounting
If there is an interfering
tab on the mounting
bracket, bend it flat.
(A) Installing with the supplied sleeve
Audio system originally
installed in the car
Car dashboard
Screw removed from the car
Install the unit at an
angle of less than 30˚.
4
Electrical connections
More about this unit
IMPORTANT: A custom wiring harness (separately purchased) which is suitable for your car is recommended
for connection between the unit and your car.
• This unit can recognize a total of 512 files, 255
folders, and 8 hierarchical levels.
• This unit can play back files recorded in VBR
(variable bit rate).
General
• If you turn off the power while listening to a track,
playback will start from where it had been stopped
previously next time you turn on the power.
• If no operation is done for about 60 seconds
after pressing MENU button, the operation will be
canceled.
• Consult your JVC car audio dealer or a company supplying kits for details.
Files recorded in VBR have a discrepancy in the
elapsed time display, and do not show the actual
elapsed time. In particular, this difference becomes
noticeable after performing the search function.
• This unit cannot play back the following files:
–MP3 files: encoded in MP3i and MP3 PRO format;
an inappropriate format; layer 1/2.
–WMA files: encoded in lossless, professional, and
voice format; not based upon Windows Media®
Audio; copy-protected with DRM.
PRECAUTIONS on power supply and speaker connections
• DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the unit will be
seriously damaged.
• BEFORE connecting the speaker leads of the power cord to the speakers, check the speaker wiring in your
car.
Tuner operations
• During SSM search...
–All previously stored stations are erased and the
stations are stored anew.
–When SSM is over, the station stored in the lowest
preset number will be automatically tuned in.
• When storing a station manually, the previously
preset station is erased when a new station is
stored in the same preset number.
–Files which have data such as AIFF, ATRAC3, etc.
• The search function works but search speed is not
constant.
• If you try to assign titles to more than 30 station
frequencies, “NAME FULL” appears. Delete
unwanted titles before assignment.
Connecting the external amplifier or subwoofer
Playing MP3/WMA tracks from a USB device
• While playing from a USB device, the playback
order may differ from other players.
• This unit may be unable to play back some USB
devices or some files due to their characteristics or
recording conditions.
• Depending on the shape of the USB devices and
connection ports, some USB devices may not be
attached properly or the connection might be
loose.
Y-connector*1
Disc/USB operations
To the blue (white stripe)
Remote lead
Caution for DualDisc playback
lead of the unit
Signal cord*1
• The Non-DVD side of a “DualDisc” does not comply
with the “Compact Disc Digital Audio” standard.
Therefore, the use of Non-DVD side of a DualDisc
on this product may not be recommended.
Rear speakers or subwoofer
JVC Amplifier
Make the <L/O MODE> setting accordingly.
(See “Menu operations” on page 3.)
• Connect one USB mass storage class device to the
unit at a time. Do not use a USB hub.
• If the connected USB device does not have the
correct files, “CANNOT PLAY” appears.
• This unit can show Tag (Version 1.0, 1.1, 2.2, 2.3, or
2.4) for MP3 files and for WMA files.
• This unit can play back MP3/WMA files meeting the
conditions below:
–Bit rate of MP3/WMA: 32 kbps — 320 kbps
–Sampling frequency of MP3:
General
• This unit has been designed to reproduce CDs/
CD Texts, and CD-Rs (Recordable)/CD-RWs
(Rewritable) in audio CD (CD-DA), MP3 and WMA
formats.
• If you change the source while listening to a disc,
playback stops. Next time you select “CD” as the
playback source, playback will start from where it
had been stopped previously.
• If the ejected disc is not removed within
15 seconds, it is automatically inserted into the
loading slot again to protect it from dust. Playback
starts automatically.
Steering wheel
remote input
Rear ground terminal
32 kHz, 44.1 kHz, 48 kHz (for MPEG-1)
16 kHz, 22.05 kHz, 24 kHz (for MPEG-2)
–Sampling frequency of WMA:
Reset the unit.
22.05 kHz, 32 kHz, 44.1 kHz, 48 kHz
• This unit can play back MP3 files recorded in VBR
(variable bit rate).
• The maximum number of characters for:
–Folder names: 32 characters; File names: 32
characters; MP3 Tag: 64 characters; WMA Tag: 32
characters
Playing a CD-R or CD-RW
• Use only “finalized” CD-Rs or CD-RWs.
• This unit can play back multi-session discs;
however, unclosed sessions will be skipped while
playing.
• Some CD-Rs or CD-RWs may not be played back on
this unit:
–Discs are dirty or scratched.
–Moisture condensation has occurred on the lens
inside the unit.
–The pickup lens inside the unit is dirty.
–The files on the CD-R/CD-RW are written using the
“Packet Write” method.
–There are improper recording conditions (missing
data, etc.) or media conditions (stained, scratched,
warped, etc.).
• CD-RWs may require a longer readout time since
the reflectance of CD-RWs is lower than that of
regular CDs.
Antenna input
15 A fuse
• This unit can recognize a total of 5 000 files, 255
folders (255 files per folder including folder without
unsupported files), and of 8 hierarchies.
• This unit does not support SD card reader.
• This unit cannot recognize a USB device whose
rating is other than 5 V and exceeds 500 mA.
• USB devices equipped with special functions such
as data security functions cannot be used with the
unit.
• Do not use a USB device with 2 or more partitions.
• This unit may not recognized a USB device
connected through a USB card reader.
• This unit may not play back files in a USB device
properly when using a USB extension cord.
• This unit cannot play back the following files:
–MP3 files: encoded in MP3i and MP3 PRO format;
an inappropriate format; layer 1/2.
1
*
White
Black
To the metallic body
or chassis of the car
1
*
White (black stripe)
Front speaker
(left)
Playing an MP3/WMA disc
• This unit can play back MP3/WMA files with the
extension code <.mp3> or <.wma> (regardless of
the letter case—upper/lower).
• This unit can show the names of albums, artists
(performer), and tag (Version 1.0, 1.1, 2.2, 2.3, or 2.4)
for MP3 files and for WMA files.
Ignition switch
Gray
Yellow *3
To a live terminal
(constant 12 V)
–WMA files: encoded in lossless, professional, and
voice format; not based upon Windows Media®
Audio.
Gray (black stripe)
Front speaker
(right)
Fuse block
• This unit can display only one-byte characters. No
other characters can be correctly displayed.
• This unit can play back MP3/WMA files meeting the
conditions below:
–Bit rate of MP3/WMA: 32 kbps — 320 kbps
–Sampling frequency of MP3:
32 kHz, 44.1 kHz, 48 kHz (for MPEG-1)
16 kHz, 22.05 kHz, 24 kHz (for MPEG-2)
–Sampling frequency of WMA:
Microsoft and Windows Media are either registered
trademarks or trademarks of Microsoft Corporation
in the United States and/or other countries.
Green
Red
To an accessory
terminal
JVC bears no responsibility for any loss of the
data in the USB mass storage class device while
using this System.
Green (black stripe)
Rear speaker
(left)
22.05 kHz, 32 kHz, 44.1 kHz, 48 kHz
–Disc format: ISO 9660 Level 1/ Level 2, Romeo,
Joliet, Windows extension
• The maximum number of characters for file/folder
names vary depending on the disc format used
(includes 4 extension characters—<.mp3> or
<.wma>).
Purple
To the remote lead of other
equipment or automatic antenna if
any (200 mA max.)
Blue (white stripe)
Purple (black stripe)
Rear speaker
(right)
–ISO 9660 Level 1: up to 12 characters; ISO 9660
Level 2: up to 31 characters; Romeo: up to 64
characters; Joliet: up to 32 characters; Windows
extension: up to 64 characters
1
*
*
Not supplied for this unit.
2
Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place uncoated with
paint.
Before checking the operation of this unit prior to installation, this lead must be connected, otherwise the power
cannot be turned on.
3
*
5
Maintenance
Troubleshooting
Moisture condensation
To play new discs
Remove any rough areas from the
inner and outer edges of the disc.
Symptom
Remedy/Cause
Moisture may condense on the lens inside the unit.
Eject the disc and leave the unit turned on for a few
hours until the moisture has evaporated.
Sound cannot be heard from the
speakers.
• Adjust the volume to the optimum level.
• Make sure the unit is not muted/paused. (See page 1.)
• Check the cords and connections.
“PROTECT” appears on the display and no Check to be sure the terminals of the speaker leads are
To keep discs clean
Wipe in a straight line from center
of disc to edge. Do not use liquid
cleaners, thinners, or benzene.
operations can be done.
covered with insulating tape properly, then reset the
unit. (See page 1.)
Do not use the following discs:
• Single CD—8 cm (3-3/16”) disc
• Warped disc
If “PROTECT” does not disappear, consult your JVC
car audio dealer or a company supplying kits.
• Disc with sticker and sticker residue
• Disc with stick-on label
• Unusual shape disc
• C-thru Disc (semi-transparent disc)
• Disc with transparent or semi-transparent parts on
its recording area
This unit does not work at all.
“AUX IN” cannot be selected.
Reset the unit. (See page 1.)
Check the <SRC SELECT>
“Menu operations” on page 3.)
SSM automatic presetting does not work. Store stations manually.
=
<AUX IN> setting. (See
Static noise while listening to the radio.
“AM” cannot be selected.
Connect the antenna firmly.
Check the <SRC SELECT>
operations” on page 3.)
=
<AM> setting. (See “Menu
Disc cannot be played back.
Insert the disc correctly.
• CD-R/CD-RW cannot be played back.
• Tracks on the CD-R/CD-RW cannot be
skipped.
• Insert a finalized CD-R/CD-RW.
• Finalize the CD-R/CD-RW with the component which
you used for recording.
Specifications
Disc can be neither played back nor
ejected.
• Unlock the disc. (See page 2.)
• Eject the disc forcibly. (See page 1.)
AUDIO AMPLIFIER SECTION
CD PLAYER SECTION
Type:
Compact disc player
Disc sound is sometimes interrupted.
• Stop playback while driving on rough roads.
• Change the disc.
• Check the cords and connections.
Power Output:
20 W RMS × 4 Channels at 4 Ω and
≤ 1% THD+N
Signal-to-Noise Ratio:
80 dBA (reference: 1 W into 4 Ω)
Signal Detection System: Non-contact optical pickup
(semiconductor laser)
Number of channels:
Frequency Response:
Dynamic Range:
Signal-to-Noise Ratio:
Wow and Flutter:
MP3 Decoding Format: MPEG1/2 Audio Layer 3
Max. Bit Rate: 320 kbps
2 channels (stereo)
5 Hz to 20 000 Hz
96 dB
“NO DISC” appears on the display.
Insert a playable disc into the loading slot.
“PLEASE” and “EJECT” appear alternately
on the display.
Press 0, then insert a disc correctly.
Load Impedance:
Tone Control Range:
4 Ω (4 Ω to 8 Ω allowance)
98 dB
Disc cannot be played back.
• Use a disc with MP3/WMA tracks recorded in a format
compliant with ISO 9660 Level 1, Level 2, Romeo, or
Joliet.
• Add the extension code <.mp3> or <.wma> to the file
names.
Less than measurable limit
Bass:
12 dB (60 Hz, 80 Hz, 100 Hz, 200 Hz)
Q1.0, Q1.25, Q1.5, Q2.0
Middle: 12 dB (0.5 kHz, 1.0 kHz, 1.5 kHz,
2.5 kHz)
WMA (Windows Media® Audio) Decoding Format:
Max. Bit Rate: 320 kbps
Q0.75, Q1.0, Q1.25
Noise is generated.
Skip to another track or change the disc. (Do not add
the extension code <.mp3> or <.wma> to non-MP3 or
WMA tracks.)
Treble:
12 dB (10.0 kHz, 12.5 kHz, 15.0 kHz,
USB SECTION
17.5 kHz)
Q (Fixed)
USB Standard:
Data Transfer Rate (Full Speed): Max. 12 Mbps
Compatible Device: Mass storage class
Compatible File System: FAT 32/16/12
Playable Audio Format: MP3/WMA
USB 1.1, USB 2.0
A longer readout time is required
(“READING” keeps flashing on the display).
Do not use too many hierarchical levels and folders.
Frequency Response: 40 Hz to 20 000 Hz
Line-Out Level/Impedance:
2.5 V/20 kΩ load (full scale)
Subwoofer-Out Level/Impedance:
2.5 V/20 kΩ load (full scale)
Output Impedance: 1 kΩ
Tracks are not played back in the order
you have intended.
Playback order is determined when the files are
recorded.
Max. Current:
DC 5 V
500 mA
“NO FILE” appears on the display.
Selected folder is an empty folder *. Select another
folder that contains MP3/WMA tracks.
* Folder that is physically empty or folder that contains data
but does not contain valid MP3/WMA track.
GENERAL
Power Requirement:
Other Terminal:
USB input terminal, AUX
Operating Voltage:
DC 14.4 V (11 V to 16 V
allowance)
(auxiliary) input jack, Antenna
input, Steering wheel remote
input
“NOT SUPPORT” appears on the display
and track skips.
Skip to the next track encoded in an appropriate format
or to the next non-copy-protected WMA track.
Grounding System:
Negative ground
Allowable Operating Temperature:
0°C to +40°C (32°F to 104°F)
Dimensions (W × H × D):
Installation Size (approx.):
The elapsed playing time is not correct.
This sometimes occurs during playback. This is caused
by how the tracks are recorded on the disc.
TUNER SECTION
Frequency Range:
The correct characters are not displayed
(e.g. album name).
This unit can only display letters (upper case), numbers,
and a limited number of symbols. (See page 2.)
FM:
87.5 MHz to 107.9 MHz
(with channel interval set to 100 kHz or
200 kHz)
87.5 MHz to 108.0 MHz
182 mm × 111 mm × 160 mm
(7-3/16” × 4-3/8” × 6-5/16”)
Panel Size (approx.):
Noise is generated.
The track played back is not an MP3/WMA track. Skip to
another file. (Do not add the extension code <.mp3>
or <.wma> to non-MP3 or WMA tracks.)
(with channel interval set to 50 kHz)
530 kHz to 1 710 kHz
188 mm × 117 mm × 23 mm
(7-7/16” × 4-5/8” × 5/16”)
AM:
“READING” keeps flashing on the display.
• Readout time varies depending on the USB device.
• Do not use too many hierarchy or folders.
• Turn off the power then on again.
(with channel interval set to 10 kHz)
531 kHz to 1 602 kHz
(with channel interval set to 9 kHz)
Mass (approx.):
1.8 kg (3.9 lbs) (excluding
accessories)
• Reattach the USB device again.
“NO FILE” appears on the display.
Selected folder is an empty folder*. Select another
folder that contains MP3/WMA tracks.
* Folder that is physically empty or folder that contains
data but does not contain valid MP3/WMA track.
Design and specifications are subject to change
without notice.
[FM Tuner]
Usable Sensitivity: 9.3 dBf (0.8 μV/75 Ω)
50 dB Quieting Sensitivity: 16.3 dBf (1.8 μV/75 Ω)
Alternate Channel Selectivity (400 kHz): 65 dB
Frequency Response: 40 Hz to 15 000 Hz
Stereo Separation: 40 dB
If a kit is necessary for your car, consult your
telephone directory for the nearest car audio
speciality shop.
“NOT SUPPORT” appears on the display
and track skips.
Skip to the next track encoded in an appropriate format
or to the next non-copy-protected WMA track.
Tracks/folders are not played back in the
order you have intended.
The playback order is determined by the write-in time
stamp. The first track/folder written into the USB device
will be the first track/folder for playback.
[AM Tuner]
Sensitivity/Selectivity: 20 μV/40 dB
• “CANNOT PLAY” flashes on the display.
• “NO USB” appears on the display.
• Attach a USB device that contains tracks encoded in
an appropriate format.
• The unit cannot detect the USB device.
• Reattach the USB device again.
While playing a track, sound is sometimes The MP3/WMA tracks have not been properly copied
interrupted.
into the USB device.
Copy MP3/WMA tracks again into the USB device, and
try again.
Correct characters are not displayed (e.g. This unit can only display letters (upper case), numbers,
album name).
and a limited number of symbols. (See page 2.)
Connect the red and black leads correctly.
Check to make sure the yellow lead is connected.
The fuse blows.
Power cannot be turned on.
No sound from the speakers.
Check to make sure the speaker output lead is not
shortcircuited.
Sound is distorted.
• Check to make sure the speaker output lead is
grounded.
• Check to make sure the “–” terminals of L and R
speakers are grounded in common.
Having TROUBLE with operation?
Please reset your unit
Noise interfere with sounds.
This unit becomes hot.
Check to make sure the rear ground terminal connected
to the car’s chassis is using shorter and thicker cords.
Still having trouble??
• Check to make sure the speaker output lead is
grounded.
• Check to make sure the “–” terminals of L and R
speakers are grounded in common.
Call 1-800-252-5722 (USA ONLY)
This unit does not work at all.
Reset the unit. (See page 1.)
6
|