T
Corporate Headquarters
10601 West Belmont Avenue
Franklin Park, Illinois 60131
U.S.A.
847.288.3300 • FAX: 847.288.3703
800.735.3867 (Toll-free within the U.S. and Canada)
International Offices
Life Fitness Asia Pacific Ltd Life Fitness Austria
Life Fitness Italia S.R.L.
Via Elvas 92
39042 Bressanone (BZ)
ITALY
12th Floor, Tower 1
The Gateway
Vertriebs GmbH
Hintschiggasse 1
1100 Vienna
25 Canton Road
Tsimshatsui, Kowloon
HONG KONG
Telephone: 852.2.575.6262
FAX: 852.2.575.6001
AUSTRIA
Telephone: 43.1.61 57 198
FAX: 43.1.61 57 198.20
Telephone: 39.472.835 470
FAX: 39.472.833 150
Life Fitness Atlantic BV
Atlantic Headquarters
Columbusstraat 25
Life Fitness Benelux NV
Lambrechtshoekenlaan 309-311 10601 West Belmont Avenue
B-2170 Antwerpen-Merksem
BELGIUM
Life Fitness Latin America
Franklin Park, Illinois 60131
U.S.A.
3165 AC Rotterdam
NETHERLANDS
Telephone: 31.10.294.5011
FAX: 31.10.294.5029
Telephone: 32.3.644.4488
FAX: 32.3.644.2480
Telephone: 847.288.3675
FAX: 847.288.3762
Life Fitness Europe GmbH
Siemensstrasse 3
Life Fitness UK Ltd
Queen Adelaide
85716 Unterschleissheim
GERMANY
Ely, Cambs CB7 4UB
UNITED KINGDOM
Telephone: 49.89.31 77 51.0
FAX: 49.89.31 77 51.99
Telephone: 44.1.353.666 017
FAX: 44.1.353.666 018
M051-00K20-A121
8/98
1
TABLE OF CONTENTS
Section
1.
Description
Page
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
How to Stabilize the Lifecycle® Exercise Bike . . . . . . . . . . . . . . . . . . . . . . 6
How to Adjust the Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
How to Adjust the Footstraps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Optional Settings for the Lifecycle Exercise Bike . . . . . . . . . . . . . . . . . . . 9
The Display Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Display Console Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Console Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Elapsed Time Window
1.1
1.2
1.3
1.4
1.5
2.
2.1
2.2
Data Entry Window
Data Entry Zone
Program Profile Window
Summary Instructions
Speed Window
Feedback Window
3.
3.1
3.2
Heart Rate Zone Training. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Why Heart Rate Zone Training? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Heart Rate Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
The Lifepulse® Digital Heart Rate Sensors
The Optional Heart Rate Chest Strap
4.
4.1
The Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Program Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
The Programs Step by Step
4.2
Program Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
To Begin a Lifecycle Exercise Bike Workout
Manual
Random
Hill
Fat Burn
Cardio
Fit Test
4.3
How to Maximize Workouts on the Lifecycle Exercise Bike . . . . . . . . . . . 26
Selecting the Correct Intensity Level
4.4
4.5
5.
5.1
5.2
5.3
5.4
5.5
Watts / METS Programmability Options . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Race Option. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Service and Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Preventive Maintenance Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
How to Solve Basic Operating Problems. . . . . . . . . . . . . . . . . . . . . . . . . . 29
Troubleshooting the Optional Heart Rate Chest Strap . . . . . . . . . . . . . . . . 30
How to Obtain Product Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Lifecycle Exercise Bike Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
© 1998 Brunswick Corporation. All rights reserved. The Life Fitness trademark is registered in the U.S. Patent and
Trademark Office, Certificate No. 1,400,502, issued July 8, 1986. Life Fitness, Lifecycle and Lifepulse are registered
trademarks, and Heart Rate Zone Training is a trademark of Brunswick Corporation. Polar is a registered trademark of
Polar. Any use of these trademarks, without the express written consent of Life Fitness or the corresponding companies is
forbidden.
3
This Operation Manual describes the functions of the following products:
Lifecycle exercise bikes
8500
8500HR
8500R
See “Specifications” page in this manual for product specific features.
4
GETTING STARTED
GETTING STARTED
1
1.1 Important Safety Instructions
Always follow the console instructions for proper operation.
Close supervision is necessary when used by or near children, invalids or disabled persons.
Never operate a Life Fitness exercise bike if it has been dropped, damaged, or even partially
immersed in water. Contact Life Fitness Customer Support Services for assistance.
Never insert objects into any opening in your Lifecycle exercise bike. If an object should
drop inside, carefully retrieve it. If you cannot reach the item, contact Life Fitness Customer
Support Services.
Never place liquids of any type directly on the unit, except in an accessory tray. Containers
with lids are recommended.
Do not use the Lifecycle exercise bike outdoors, near swimming pools or in areas of
high humidity.
Do not use the Lifecycle exercise bike in areas where aerosol spray products are being
used or where oxygen is being administered. Such substances increase the danger of
combustion and explosion.
Keep all loose clothing, shoelaces, and towels away from the Lifecycle exercise bike pedals.
Keep the area around your Lifecycle exercise bike clear of any obstructions, including
walls and furniture.
Always be careful and exercise caution when mounting or dismounting your Lifecycle
exercise bike. Use the handlebar whenever additional stability is required.
Wear shoes with rubber or high-traction soles. Do not use shoes with heels,leather soles,
cleats or spikes. Do not use the bike in your bare feet.
Do not tip the Lifecycle exercise bike on its side during operation.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
Life Fitness STRONGLY recommends that if you are undertaking an exercise program
please see your physician for a complete medical exam, particularly if you have a family
history of high blood pressure or heart disease, are over the age of 45, or if you smoke,
have high cholesterol, are obese, or have not exercised regularly in the past year.
If, at any time while exercising, you feel faint, dizzy, pain, or shortness of
breath, stop immediately.
5
1.2 How to Stabilize the Lifecycle Exercise Bike
Depending on the surface on which the Lifecycle exercise bike is placed, it may need to be
stabilized. After you place the bike where you will primarily use it, check the stability of the
bike by attempting to rock it back and forth. If it rocks, it is not stable. To stabilize it, rotate
the foot on the stabilizer bar that appears to be higher counter-clockwise (as viewed from
above) with your finger until the bike is level. Tighten the locknut.
6
How to Adjust the Seat
A properly adjusted seat is extremely important in any bike-oriented exercise activity and
the Lifecycle exercise bike is no exception. If the seat is too close, excessive strain will be
placed on the knees and quadriceps muscles; if the seat is too far, the resulting reaching
action will irritate the feet, ankles, hips and knees.
Sit on the seat and place the balls of your feet on the pedals. An optimum position will allow
you to move through the bottom of the stroke without locking your knees or shifting in the
seat (your knees should have a slight bend at the point of fullest leg extension).
Upright Exercise Bikes:
If the seat needs to be adjusted,
dismount the bike and pull the spring-
loaded adjusting pin located on the back
of the seat post (or pull out the adjusting
pin located on the front of the seat post).
Slide the seat post up or down as
necessary to the proper position and
release the pin to complete engagement.
Check the seat height again and readjust
it if necessary.
Recumbent Exercise Bikes:
If the seat needs to be adjusted, lift the spring-loaded
adjusting handle located on the right, front side of the seat.
Slide the seat forward or backward as necessary to the
proper position and release the pin to complete engagement.
Gently slide the seat forward and backward a small distance
to ensure it is locked into place. Check the seat distance
again and re-adjust it if necessary.
Do not attempt to adjust the seat while you are pedaling the bike. Doing
so or failing to insert the seat pin completely may result in an
uncomfortable workout or cause injury.
7
1.4 How to Adjust the Footstraps
The pedals on the Lifecycle exercise bike have footstraps with slits on both the inside and
the outside of each strap. To adjust the size of the straps, grasp the outside of the strap and
pull down and away from the knob. Once the slotted end is removed, choose a size that will
feel the most comfortable while riding, reinsert the knob through the slot and pull the strap
up. The knob will click when it locks in place.
Do not attempt to adjust the pedal footstraps while you are pedaling the
bike. Doing so may result in an uncomfortable workout or cause injury.
8
1.5 Optional Settings for the Lifecycle Exercise Bike
Maximum Program Time
l
The maximum program time option allows the maximum program time to be changed from
the default maximum time limit of 60 minutes to anywhere from 1 to 99 minutes. Altering the
maximum program time will affect all programs except the Fit Test. To change the Lifecycle
exercise bike’s maximum program time, proceed as follows:
1.
2.
Press and hold the 5 key on the numeric keypad.
Begin pedaling, then press START.
All LEDs and 7-segment displays will be illuminated when you enter Diagnostic State 1. The
maximum program time default settings are located in Diagnostic State 5. Each time you
press the ENTER key you will advance one diagnostic state. Continue to advance to
Diagnostic State 5.
3.
When you reach Diagnostic State 5, the current MAXIMUM PROGRAM
TIME setting will be displayed. The factory set default maximum program
time is 60 minutes.
4.
5.
Use the 1 key to decrease the MAXIMUM PROGRAM TIME or the 3 key to
increase the MAXIMUM PROGRAM TIME.
To exit the Diagnostic States, press the CLEAR / PAUSE key repeatedly until
you return to the user display. The user display is the initial display console
you see when you approach the unit for normal operation.
English / Metric toggle
l
Follow steps 1, 2 and 3 as listed above to reach Diagnostic State 5 and continue with Step
4 as listed below.
4.
Press the ENTER key two more times to reach Diagnostic State 7. This state
indicates the display console default setting of English or Metric units.
When the default is set to English units of measurement, it will read ‘E’ in the
upper right window of the display console.
When the default is set to Metric units of measurement, it will read ‘9’ in the
upper right window of the display console.
5.
To exit the Diagnostic States, press the CLEAR / PAUSE key repeatedly
until you return to the SELECT PROGRAM state (all program LED’s will
be flashing).
9
THE DISPLAY CONSOLE
2
2.1 Display Console Overview
The Lifecycle exercise bike’s display console is easy to use and it allows you to follow
progress as you ride. The on-board computer lets you tailor workouts to individual fitness
capabilities and goals while providing a unique means of measuring fitness improvement
from one workout to the next.
A
G
B
F
C
D
E
2.2 Console Descriptions
Elapsed Time Window
A
ELAPSED TIME WINDOW: Shows the riding time selected in the Manual, Random, Hill, Fat
Burn and Cardio heart rate management programs and the total elapsed time of the
workout. When the CLEAR / PAUSE key is pressed, the display functions as a stopwatch
(you must continue pedaling). For additional information see Operating Instructions and
Program Descriptions.
Data Entry Window
B
DATA ENTRY WINDOW: Displays most data prompts and inputs the effort level chosen
(which remains displayed throughout the workout, except in the Fit Test program or when
Watts or METS workouts are selected). Your actual and target heart rates also will be
displayed here when using the Lifepulse grips or wearing the optional heart rate monitor
chest strap (depending on Lifecycle model).
10
Data Entry Zone
C
DATA ENTRY ZONE: Allows information pertinent to the program selected to be entered.
PROGRAM SELECT: This is where to select the workout program. Each time
you press the PROGRAM SELECT key, an LED light will move from left to right
to the next program option. When the program you want is displayed press
ENTER or wait 10 seconds and your choice will be automatically entered.
START: Activates the display console once you begin pedaling and is then
inactive for the remainder of the workout.
ENTER: Actually executes the input of any information keyed in. It is not necessary
to press ENTER when keying in a new effort level.
RACE ON / OFF: Lets you toggle in and out of the Race mode at any time in
the Manual, Random and Hill programs. The Speed / RPM display will toggle
between RPMs and MPH / KPH every five seconds. The MPH / KPH will be
dependent on the pedal speed and the level chosen. See the Race Option
inset later in this manual.
CLEAR / PAUSE: Use this key to clear data before pressing the ENTER key.
This key will also put your workout program on hold or restart it. To put a workout
on hold, press the key once and continue pedaling (remember, pedaling powers
the machine; if you stop pedaling, all power is lost and the display will go blank).
Pedal resistance drops to the minimum when the Lifecycle exercise bike is
paused and the stopwatch function is activated and the elapsed time window
begins counting up from zero. Use this as a brief rest period if you feel fatigued
or to take your heart rate. Resume the workout by pressing ENTER once, or end
the workout by pressing CLEAR/PAUSE twice.
NUMERIC KEYS: Use these keys to enter riding time, level of difficulty and
Heart Rate or Fit Test data. You can select a workout duration of anywhere from
†
1 to 99 minutes. You also enter a different resistance level than your current
level, a different target heart rate for the Fat Burn and Cardio programs, or Fit
Test data such as age, gender or weight via the numeric keypad.
WATTS (0) and METS (8): This key allows you to view your workout results in
Watts or METS. (For more information on Watts and METS please see Watts /
METS Programmability Option.)
†60 minutes is the factory setting for the Maximum Program Duration. To increase or decrease the Maximum Program
Duration see the Optional Settings for the Lifecycle exercise bike section.
11
Program Profile Window
D
PROGRAM PROFILE WINDOW: Displays a matrix of lights showing the present position
and upcoming terrain. The higher the column of lights the greater the resistance. The left-
most column of lights represent the current position. The remaining columns show the
upcoming terrain. As the workout progresses, the lights move across the screen from right
to left. When at the Program Select stage, graphical depictions of each program appear in
the Program Profile Window as that program’s LED is lit.
In the Fat Burn and Cardio programs, a heart shape ( ) will be displayed in the window; this
is your prompt to grasp the Lifepulse sensors (if so equipped) so that the on-board computer
can obtain your heart rate. When your heart rate has been read, the heart will disappear and
you may remove your hands. If you have a telemetry equipped model and are not wearing an
optional heart rate monitor chest strap or it is not detected, the heart will flash (the exercise bike
will switch to the Manual program at half the selected level if no heart rate is detected during
the first three minutes of the warm-up). A flashing heart will also appear at the conclusion of the
Fit Test if you are not wearing a heart rate monitor chest strap.
Summary Instructions
E
SUMMARY INSTRUCTIONS: An abbreviated version of the steps required to begin a
workout on the Lifecycle exercise bike. This is a summary of the information presented in
greater detail throughout this manual.
Speed Window
F
SPEED WINDOW: The Lifecycle exercise bike can display speed in revolutions per minute
(RPMs) or miles or kilometers per hour (MPH / KPH) when in the Race mode. In the Hill,
Random and Manual programs, you may switch in and out of the Race mode whenever you
wish. When in the Race mode, the Speed Window will toggle between RPMs and MPH or
KPH every five seconds.
Feedback Window
G
FEEDBACK WINDOW: Displays the number of calories burned per hour, total distance
traveled (in miles or kilometers), total calories, or Watts or METS if you have selected one
of these options. The readout automatically displays these forms of feedback in 10-second
intervals, except when in the Hill program for a duration of less than six minutes when it
changes every five seconds.
12
TM
TM
HEART RATE ZONE TRAINING EXERCISE
3
3.1 Why Heart Rate Zone Training?
Research shows that exercising within a specific heart rate range is the optimal way to
monitor exercise intensity and achieve maximum results. That is the idea behind the Life
Fitness Heart Rate Zone Training exercise program.
Zone Training takes the guesswork out of working out by identifying specific ranges, or
zones, in which to maintain a heart rate to achieve maximum exercise results according to
personal goals. In short, Zone Training all but eliminates under- and over-training by allowing
you to target your heart rate to your individual fitness objectives.
For instance, if the primary goal is to burn fat, exercise at a level between 60% and 75% of
your theoretical maximum heart rate†. To improve cardiovascular condition, you should work
out at 75% to 85% of your theoretical maximum heart rate.
Life Fitness offers two exclusive programs designed to take full advantage of the benefits of
Heart Rate Zone Training: Fat Burn and Cardio. Vary the focus of exercise activities by
switching between the Fat Burn and Cardio program at any time during a workout or by
entering a new target heart rate with the keypad.
Both the Fat Burn and Cardio programs measure heart rate. As you exercise, grasp the
Lifepulse sensors (if so equipped) when prompted or simply wear an optional telemetry heart
rate chest strap (on telemetry equipped models) and your heart rate will be transmitted to the
on-board computer. The resistance level will automatically adjust to maintain the target heart
rate based on your actual heart rate.
†(Defined by the American College of Sports Medicine’s “Guidelines for Exercise Testing and Prescription” as 220 minus your age.)
13
3.2 Heart Rate Monitoring
®
The Lifepulse Digitial Heart Rate Sensors
The patented Lifepulse digital heart rate sensors are the built-in heart rate monitoring
system on some models of the Lifecycle exercise bikes.
To use the Lifepulse sensors, simply grasp the stainless steel sensors on the handlebars
when the display console prompts you with the
rate. There are four sensors - two on each grip.
, or anytime you wish to check your heart
You must make contact with all four to obtain your heart rate. The console will display your
heart rate in 10 to 30 seconds.
The Optional Heart Rate Chest Strap
Wet the electrodes to the transmitter (the two grooved surfaces on the underside of the
strap) and secure the strap as high under the chest muscles as possible. The strap should
be snug, but comfortable enough to allow for normal breathing.
The transmitter strap will deliver an optimum heart rate reading when the electrodes are directly
in contact with bare skin. However, it will function properly through wet, lightweight clothing.
The key to proper operation is for the electrodes to remain wet to conduct the electrical
impulses of the heart back to the receiver.
If it becomes necessary to remoisten the chest strap transmitter, grasp the center of the strap,
pull it away from the chest to expose the two electrodes, then moisten them in this position.
14
THE PROGRAMS
HE ROGRAMS
4
4.1 Program Overview
Selecting a workout program on the Lifecycle exercise bike is easy. Six computerized
aerobic workouts, including the exclusive Fat Burn, Cardio and Fit Test programs, are
preprogrammed on the Lifecycle exercise bike.
MANUAL maintains a constant effort level based on the goals selected.
RANDOM is a program of varying effort levels which occur randomly with each
exercise session, resulting in more than one million workout combinations.
HILL is an interval training workout consisting of a warm-up period followed by a
plateau of constant effort, progressively more difficult levels of effort (hills)
separated by periods of recovery (valleys) and a cool-down period.
FAT BURN is a Heart Rate Zone Training™ program designed to burn an optimum
amount of calories from fat by automatically maintaining a target heart rate of 65%
of your theoretical maximum heart rate.
CARDIO is a Heart Rate Zone Training™ program designed to increase
cardiovascular fitness by automatically maintaining a target heart rate of 80% of
your theoretical maximum heart rate.
FIT TEST is a way of measuring the aerobic fitness level of an individual
compared to others of the same age and gender.
The Lifecycle exercise bike is a “constant work” machine; in the Manual, Random and Hill
programs, pedal resistance automatically compensates for changes in RPM. In other words,
the slower you pedal, the greater the resistance; conversely, the faster you pedal the less
resistance you feel*. The distance you travel will remain the same; pedaling faster will not
bring you to the end of a program sooner or burn more calories, assuring you of a consistent
workout. If you prefer to be “rewarded” for going faster, then try the Race mode option.
NOTE: Mileage readings are arbitrary and should not be used to compare workouts in
different programs. Total calories burned is the best measure of the amount of
work performed in any given workout.
*This is true as long as you pedal faster than 65 RPM. Below 65 RPM, the resistance will drop off to the point where you can
continue pedaling at a pace sufficient to maintain power to the electronics.
15
The Programs
Step by Step
16
4.2 Program Descriptions
To Begin a Lifecycle Exercise Bike Workout:
l
First adjust the seat position and make certain the seat pin is properly locked and the
bike is level.
l
l
Begin pedaling and press the START key.
Select one of the flashing program options by pressing the PROGRAM SELECT key
until the program you want is lit and then press ENTER (or wait 10 seconds and your
selection will be automatically entered).
l
You can “Quickstart” a Manual program workout without using the PROGRAM
SELECT key. To do so, just press ENTER before selecting a program. The computer
will automatically begin a Manual workout at the maximum allowable program time
and prompt you to enter a resistance level. If you press a number from 0 – 9 rather
than ENTER, the computer will automatically begin a Manual workout at the
maximum allowable program time and that effort level (enter 1 - 0, 1 - 1, or 1 - 2 for
effort levels 10 - 20).
REMEMBER – You can change effort levels any time during a workout* by simply
keying in a new level on the keypad!
*Except in the Fat Burn and Cardio programs in which you may change your target heart rate.
17
Manual and Random Programs
MANUAL PROGRAM
l
l
After selecting a Manual workout, you will be asked to enter a desired workout time
in minutes. Enter a number from 10 to 60† minutes and press ENTER.
Select an effort level from 1 – 20. The effort level will be displayed in the Data Entry
Window (you do not need to press ENTER).
The Manual program provides steady-pace exercise equal to that of the highest hill
encountered on the Hill program at the same level of effort (except at level 1, when the
resistance equals that of the lowest valley). Because of the greater resistance levels of this
program, it is recommended that you set the Manual program two to three levels lower than
the level of effort that would normally be selected on the Hill program.
You can design your own interval training program using the Manual program by varying the
level of effort during the course of your workout. To do so, select a high level of resistance
until you reach the upper end of your target heart rate zone, then ride at a lower effort level
until your heart rate drops to the bottom of your target zone. Then increase the level of
effort again until you are back to the upper portion of your target zone. By repeating this
process, you will actually create your own hills and valleys.
RANDOM PROGRAM
l
l
After selecting a Random workout, you will be asked to enter the desired workout
time in minutes. Enter a number from 10 to 60† minutes and press ENTER.
Select an effort level from 1 – 20. The effort level will be displayed in the Data Entry
Window (you do not need to press ENTER).
The computer randomly selects hill and valley terrain which varies with each and every
workout, resulting in more than one million combinations. Because resistance levels are
greater in this program than in the Hill program, it is recommended that the Random
program be set one or two levels lower than the level of intensity that would normally be
selected on the Hill program.
†
60 minutes is the factory setting for the Maximum Program Duration. To increase or decrease the Maximum Program
Duration see the Optional Settings for the Lifecycle Exercise Bike section.
18
HILL PROGRAM
l
l
After selecting a Hill workout, you will be asked to enter the desired workout time in
minutes. Enter a number from 10 to 60† minutes and press ENTER.
Select an effort level from 1 – 20. The effort level will be displayed in the Data Entry
Window (you do not need to press ENTER).
The Lifecycle exercise bike’s patented Hill program offers the ideal configuration for interval
training: periods of intense aerobic activity separated by regular intervals of lower-intensity
exercise. Interval training programs have been scientifically demonstrated to yield greater
cardiorespiratory improvement than steady-pace training.
Not only does the Hill program offer the challenge of alternating periods of high and low
intensity, but the levels of intensity become progressively more difficult during the course of
the program. Because you have the option of working out in a Hill program from 1 to 60†
minutes, and because the Hill program is composed of four distinct phases, the 20 intervals
that make up the program must be structured differently to accommodate the entire array of
program durations. Longer workouts add more hills.
†
60 minutes is the factory setting for the Maximum Program Duration. To increase or decrease the Maximum Program
Duration see the Optional Settings for the Lifecycle Exercise Bike section.
Each Hill program session comprises the following phases:
(1) Warm-up, (2) Plateau, (3) Interval Training, and (4) Cool-down
l
Warm-up: Gradually brings your heart rate into the lower portion of your target heart
rate zone, increasing respiration and blood flow to working muscles.
l
l
Plateau: Brings your heart rate in your target zone.
Interval Training: A series of hills and valleys. During this portion of the workout, you
will be confronted with sets of four successively steeper hills, each separated from
the next by a valley, or recovery period. Check your heart rate at the end of the
interval training period to ensure that you have stayed within your target zone.
l
Cool-down: Allows the body to begin removing accumulated by-products of exercise,
such as lactic acid, which build up in muscles during a workout and contribute to
muscle soreness.
19
The Hill diagram below shows the effort level and recovery periods encountered during a Hill
workout. Effort and recovery periods are simulated on the display console by columns of lights
in the Program Profile Window. The columns move from right to left during the workout. The
higher the column, the higher the incline; consequently, you must increase the effort.
Heart Rate Check Points
For Fat Burning:
4
4
First Heart Rate Check Point — Your heart rate should be between 60% and
70% of the theoretical maximum heart rate for your age category.
Second Heart Rate Check Point — Your heart rate should be between 70% and
75% of the theoretical maximum heart rate for your age category.
For Cardio:
4
First Heart Rate Check Point — Your heart rate should be between 75% and
80% of the theoretical maximum for your age category.
4
Second Heart Rate Check Point — Your heart rate should be between 80% and
85% of the theoretical maximum for your age category.
Be sure to check your heart rate near the end of the plateau and interval training periods
using the Lifepulse Sensors, (if so equipped), if not wearing an optional heart rate chest
strap (see Hill diagram above). You should always take your heart rate at the time
indicated to make sure you are staying within your target heart rate zone.
20
Fat Burn and Cardio Programs
On models equipped with telemetry heart rate features, the user must wear an optional heart
rate chest strap transmitter to use these programs. On models equipped with Lifepulse
sensors, the user must grasp the Lifepulse sensors when prompted by a flashing heart in the
program window.
l
Enter age using the numeric keypad to receive a computed target heart rate. Press
ENTER to accept the calculated target or input a chosen target heart rate using the
keypad and press ENTER.
l
l
The Data Entry Window will prompt you to enter a time from 1 – 60† minutes. Key in the
time you want the workout to last and press ENTER.
Finally, select a warm-up effort level from 1 – 20. The effort level will be displayed in the Data
Entry Window (you do not need to press ENTER) and your heart rate management program
will begin a three minute warm-up at this level or until you reach your target heart rate,
whichever comes first, followed by the actual heart rate controlled portion of the program.
FAT BURN
The Fat Burn and Cardio heart rate management programs work by adjusting the resistance of
the Lifecycle exercise bike in response to your heart rate. The programs use heart rate
technology to monitor your heart rate and automatically adjust the work load to maintain your
target heart rate. The end result is a perfect workout every time, eliminating both under- and
over-training.
On the Lifecycle exercise bike, the Fat Burn program uses the technology of heart rate
monitoring to automatically keep your heart rate at 65% of your theoretical maximum heart rate‡
or another target heart rate that you enter. Pedal resistance will automatically adjust to maintain
the target heart rate. Exercising at 65% of your theoretical maximum heart rate maximizes the
aerobic benefits of exercise by accessing the body’s fat stores for fuel.
† 60 minutes is the factory setting for the Maximum Program Duration. To increase or decrease the Maximum Program Duration
see the Optional Settings for the Lifecycle Exercise Bike section.
‡ (Defined by the American College of Sports Medicine’s “Guidelines for Exercise Testing and Prescription” as 220 minus your age.)
CARDIO
The Cardio program is virtually identical to the Fat Burn program. The only difference is that your
target heart rate is calculated at 80% of your theoretical maximum to accentuate cardiovascular
improvement by placing a heavier work load on the heart muscle. If you wish to vary the focus of
the exercise activities, switch back and forth between the Fat Burn and Cardio programs at any
time during a workout, creating the ultimate interval training program!
21
REMEMBER: You may change your target heart rate at any time after the warm-up
period by simply keying in a new target heart rate.
The Life Fitness Heart Rate program begins with a three minute warm-up period designed
to safely get you closer to your target heart rate from a resting start. It should take two to
three minutes for your heart rate to reach the target.
NOTE: If your heart rate is above the chosen target during the warm-up period, the
warm-up period will immediately end and the Lifecycle exercise bike will
begin automatically varying its resistance to maintain the target heart rate.
FIT TEST
The Lifecycle exercise bike Fit Test program is another exclusive feature of this versatile
exercise bike. The Fit Test score is also an approximate measure of your VO2 max; think of
it as your relative fitness score. Use the Fit Test to monitor improvement in personal
endurance every four to six weeks.
l
After selecting the Fit Test program with the PROGRAM SELECT key, the data entry window
will ask for age (AGE). Use the numeric keys to input age and press ENTER.
l
After entering age, the data entry window will ask for weight: Lb (for weight in pounds on
English units) or gr (for weight in kilograms on metric units). Use the numeric keys to
input weight and press ENTER.
l
l
After entering weight, the data entry window will ask you to select gender (SE). Press 1
for male or 2 for female and then press ENTER.
Finally, consult the Activity Levels chart on the following page for the effort level (L). You
should take the Fit Test based on age, gender and activity level. Use the numeric keys
to enter the corresponding level.
After having completed the five-minute Fit Test, your heart rate will be automatically entered
by the Lifepulse sensors or from your optional heart rate chest strap by the on-board
computer (to enter heart rate manually, use the time prompt to take your pulse and enter it
with the numeric keys). The Fit Test score will be displayed, which you can use to find your
ranking in the fit Test scoring tables located in this section.
22
RECOMMENDED FIT TEST LEVELS
AGE
<30
WEIGHT
(KG)
INACTIVE
ACTIVE
VERY
ACTIVE
<130
131-169
170-210
>210
<59
2
4
5
7
4
5
7
9
5
7
9
59.5 - 76.8
72.3 - 95.5
>95.5
10
30-39
40-49
50+
<130
131-169
170-210
>210
<59
1
2
4
5
2
4
5
7
4
5
7
9
59.5 - 76.8
72.3 - 95.5
>95.5
<130
131-169
170-210
>210
<59
1
2
2
4
1
2
4
5
2
4
5
7
59.5 - 76.8
72.3 - 95.5
>95.5
<130
131-169
170-210
>210
<59
1
1
2
2
1
2
2
4
1
2
4
5
59.5 - 76.8
2.3 - 95.5
>95.5
NOTE: If your weight varies from these values substantially, you may wish to
increase or decrease the indicated levels accordingly.
If your heart rate is below 65% of your theoretical maximum heart rate at the conclusion of
the Fit Test, retake the test at a higher level.
The Fit Test is an estimate of your VO max, which is a measurement of how well the heart
2
supplies oxygenated blood to the exercising muscles and how efficiently those muscles
receive oxygen from the blood. This measurement is generally regarded by physicians and
exercise physiologists as the standard for aerobic capacity.
23
Fit Test Tips
The computer will not accept:
l
l
l
l
heart rates less than 90 or greater than 199 beats per minute
body weights less than 74 pounds (34 kg) or greater than 350 pounds (159 kg)
ages below 10 or over 99 years
data input that exceeds human potential
If you make an error when entering any Fit Test data, you can correct it by pressing
CLEAR / PAUSE, inputting the correct information, and pressing ENTER.
It is important to take the Fit Test under similar circumstances each time. The heart rate is
dependent on many factors, including:
l
l
l
l
amount of sleep the previous night (at least seven hours is recommended)
time of day
time since last meal (two to four hours after the last meal is recommended)
time since last drinking a liquid containing caffeine or alcohol or smoking a cigarette
(at least four hours is recommended)
l
time since having last exercised (at least six hours is recommended)
For the most accurate Fit Test results, you should perform the Fit Test on three
consecutive days and average the three scores.
NOTE: To receive a proper Fit Test score, you must work within your training heart rate
zone, which is 60% to 85% of your theoretical maximum heart rate.
24
RELATIVE FITNESS CLASSIFICATION FOR MEN
AGE
Rating
Elite
20 - 29
55+
30 - 39
52+
40 - 49
50+
50 - 59
48+
60+
45+
Excellent
Good
Above Average 40 - 44
Average 36 - 39
Below Average 31 - 35
50 - 54
45 - 49
47 - 51
42 - 46
37 - 41
33 - 36
28 - 32
23 - 270
<23
45 - 49
40 - 44
35 - 39
31 - 34
26 - 30
20 - 25
<20
43 - 47
38 - 42
33 - 37
29 - 32
24 - 28
18 - 23
<18
40 - 44
35 - 39
30 - 34
26 - 29
21 - 25
16 - 20
<16
Poor
Very Poor
26 - 30
<26
RELATIVE FITNESS CLASSIFICATION FOR WOMEN
AGE
Rating
Elite
20 - 29
49+
30 - 39
46+
40 - 49
44+
50 - 59
42+
60+
40+
Excellent
Good
Above Average 34 - 38
Average 30 - 33
Below Average 25 - 29
44 - 48
39 - 43
41 - 45
36 - 40
31 - 35
27 - 30
22 - 26
17 - 21
<17
39 - 43
34 - 38
29 - 33
25 - 28
20 - 24
15 - 19
<15
37 - 41
32 - 36
27 - 31
23 - 26
18 - 22
13 - 17
<13
35 - 39
30 - 34
25 - 29
21 - 24
16 - 20
11 - 15
<11
Poor
Very Poor
20 - 24
<20
Fit Test scoring
25
4.3 How to Maximize Workouts on the Lifecycle Exercise Bike
In all Lifecycle exercise bike workout programs except the Fit Test, you can change the level of
intensity at any time by simply pressing a new number – between 1 and 20 – on the numeric
keypad. In addition, should you decide to work out in one program after starting another, simply
push CLEAR three times to clear the first program and then select the new program.
Selecting the Correct Intensity Level
The Lifecycle exercise bike offers 20 levels of intensity, or difficulty, to choose from –
level 1 is the easiest and level 20 is the most challenging. Select a low effort level until
becoming accustomed to the Lifecycle exercise bike, then increase the intensity as
conditioning improves.
The Random and Manual programs are proportionately more difficult than the Hill
program. Because of this, be careful to select an effort level in the Random program
that is one to two levels lower than would normally be selected in the Hill program.
Conversely, if choosing the Manual program, select an intensity level that is at least
three levels lower than the workout level normally used in the Hill program. The
following table will allow you to compare the relative intensities of the four Lifecycle
exercise bike computerized fitness programs.
HILL
RANDOM
MANUAL OR FIT TEST
1
1
3
1
2
3
7
5-7
8
3
10
13
17
18-20
5
12-13
15
7
8
17-18
20
10
12
13
15
17
18
20
26
4.4 Watts / METS Programmability Options
A Watt is a unit of power which measures the amount of mechanical work required to
operate a device such as an exercise bike (roughly equal to 1/4 of calories per hour).
For example, if your doctor should recommend that you exercise three times per week for
20 minutes at 100 Watts (the value must be between 33 and 338), this option would ensure
that you maintain the 100 Watt level by altering the pedal resistance in proportion to your
pedaling speed.
METS are a unit of measure used to express the metabolic rate of work (oxygen
consumption per unit of body weight) required to perform a task. One MET is approximately
equal to a person’s metabolism when seated and relaxed.
Both the Watts and METS options will “lock” the feedback window, displaying only the Watts
or METS values.
It is possible to enter a value of Watts or METS to maintain on your Lifecycle, rather than a
resistance level.
To enter a value of Watts to maintain, you must first enter into the Manual program as you
normally would:
l
l
l
Continue pedaling
Press 0 / Watts, then within two seconds
Enter a Watts value between 33 and 338, then press ENTER.
To enter a value of METS to maintain:
l
l
l
l
Begin pedaling and press the START key
Press the 8 / METS key, then the ENTER key
When you are prompted, enter your weight and press the ENTER key
When you are prompted, enter into the Manual program as you normally would.
You may change your setting in either the Watts or METS mode at anytime during a workout by
pressing the 0 / Watts or 8 / METS key and keying in a new Watts or METS value to maintain
followed by ENTER. To return to a resistance level, key in a number between 1 – 20.
Both the Watts and METS options will “lock” the feedback window, displaying only the Watts
and METS values.
4.5 The Race Option
The Race mode allows pedal resistance variance to simulate the feel of an actual 20-speed
racing bike in the Manual, Random and Hill programs. Turn the Race mode on at any time and
the Life Fitness exercise bike’s 20 effort levels are transformed into the “gears” of a high
performance, road-racing bicycle! The pedal resistance will change with the speed at which you
pedal, enhancing the workout enjoyment while also allowing greater control over the program’s
intensity (the greater the resistance, the more LEDs will be illuminated). The distance traveled
and the calories burned during the workout will also vary with the pedal speed.
27
SERVICE AND TECHNICAL DATA
5
5
5.1 Preventive Maintenance Tips
The Lifecycle exercise bike is backed by the engineering excellence of Life Fitness and is
one of the most popular, rugged and trouble-free pieces of exercise equipment on the
market today. Here are some preventive maintenance tips that will keep the Lifecycle
exercise bike operating at peak performance:
l
l
l
l
Locate the Lifecycle exercise bike in a cool, dry place. Do not place it outdoors, near
swimming pools or in areas of high humidity.
Clean the seat surface, the pedals and the housing regularly with a soft, clean cloth
(you may use a non-abrasive liquid cleaner on the housing).
Clean the seat-post shaft and check the pin insertion regularly. If needed, lubricate
the seat post with one or two drops of machine oil or automotive wax.
Keep the display console free of fingerprints and salt build-up caused by sweat. Use
a 100% cotton cloth lightly moistened with water and a mild liquid detergent (other
fabrics or paper towels may scratch the surface).
l
l
Long fingernails may scratch the surface of the console. Use the pad of the fingertip
to press the console buttons.
The chain (on chain drive models) and pedal shaft should be cleaned and lubricated
every three months and inspected annually.
NOTE: NEVER remove the stabilizer bar.
28
5.2 How to Solve Basic Operating Problems
SYMPTOM
PROBABLE CAUSE
CORRECTIVE ACTION
No Power
9-volt battery missing
9-volt battery too low
Harness not connected
Install 9-volt alkaline battery
Replace 9-volt alkaline battery
Disconnect and
reconnect harness
Difficult to pedal
10 to 15 hour break-in
period not complete
Ride the bike for 10
to 15 hours
Bike shuts off during ride
Pedaling too slow
Pedal at 45 RPM minimum
Not entering desired
workout duration
Check that desired workout
duration appears in display
window prior to pressing
ENTER
Display flickers or fades in
and out
Wire harness connector
loose
Carefully remove console and
disconnect then reconnect
the 16-pin connector
29
5.3 Troubleshooting the Optional Heart Rate Chest Strap
The optional Heat Rate Chest Strap is required when using a Lifecycle bike which is
equipped with Polar compatible telemetry heart rate monitoring technology.
The heart rate reading is erratic or absent entirely.
l
Repeat the electrode wetting procedure (see How to Use the Optional Heart Rate Chest
Strap). The electrodes must be wet to pick up and transmit accurate heart rate readings.
l
l
l
Make sure the electrodes are flat against the skin.
Wash the belt transmitter regularly with mild soap and water.
Make sure the chest strap transmitter is within three feet (one meter) of the
heart rate receiver.
l
The estimated battery life of the chest strap transmitter is 2500 hours of use. If the
chest strap transmitter battery is depleted, contact Life Fitness Customer Support
Services for instructions on how to have your chest strap replaced. (See “How to
Obtain Product Service” for locations.)
The heart rate reading is erratic or extremely high (above 200).
l
When exercising with the heart rate chest strap, it may come within range of
electromagnetic signals strong enough to cause abnormally elevated heart rate
readings. Possible sources of such signals include television sets and/or antennas,
computers, cars, high voltage power lines and motor driven exercise equipment.
Another heart rate transmitter within three feet (one meter) may also cause abnormal
heart rate readings.
NOTE: There is a very small – less than one percent – portion of the general
population whose heart rates can not be detected by heart rate
monitors, including Electrocardiograph. This phenomenon is called
biopotential and is extremely rare.
30
5.4 How to Obtain Product Service
Step 1
Verify the symptom and review the operating instructions and How to Solve Basic Operating
Problems within this manual. The problem may be unfamiliarity with the Lifecycle exercise
bike's features and programs.
Step 2
Locate and document the serial number of the unit, which is located on the underside of the
bike, just behind the front stabilizer bar.
Step 3
Contact the nearest Life Fitness
Customer Support Services group:
Toll-free within the U.S.and Canada
Telephone: 800.351.3737 or 847.451.0036
FAX: 847.288.3702
For Product Service Internationally:
Life Fitness Europe GmbH
Telephone: 49.89.317751.66
FAX: 49.89.317751.38
Life Fitness (UK) Ltd
Telephone: 44.1.353.665507
FAX: 44.1.353.666018
Life Fitness Benelux NV
Telephone: 32.3.644.4488
FAX: 32.3.644.2480
Life Fitness Italia S.R.L.
Telephone: 39.472.835470
FAX: 39.472.833150
Life Fitness Austria Vertriebs GmbH
Telephone: 43.1.61.57198
FAX: 43.1.61.57198.20
Life Fitness Asia Pacific Ltd
Telephone: 852.2575.6262
FAX: 852.2575.6001
Life Fitness Latin America
Telephone: 847.451.0036
FAX: 847.288.3702
Please have the serial number of the Lifecycle exercise bike and the problem / symptom
ready for the Customer Support Services Specialist who will be assisting you. This information
is necessary for us to help solve any problems you may be having.
31
5.5 Lifecycle Exercise Bike Specifications
Power requirements
None
Programs
Manual, Random, Hill, Cardio, Fat Burn, Fit Test
Console displays
Elapsed time, pedal RPM and MPH or KPH, calories per hour (Watts
or METS optional), total calories burned, distance traveled (miles or
kilometers), resistance level, heart rate (when wearing an optional
telemetry heart rate monitoring chest strap on models without
Lifepulse sensors)
Heart Rate monitor system
LC8500HR
LC8500, LC8500R
digital Lifepulse sensors
Polar compatible telemetry heart rate
monitoring system (optional Heart
Rate chest strap required)
Color
LC8500, LC8500HR, LC8500R
Light granite
Maximum user weight
ASSEMBLED DIMENSIONS:
LC8500, LC8500HR, LC8500R
250 lbs / 114 kg
LC8500, LC8500HR
46 in. / 116.8 cm
23 in. / 57.8 cm
55 in. / 139.7 cm
87 lbs. / 39.4 kg
LC8500R
Length
Width
Height
Weight
56 in. / 142.2 cm
25 in. / 63 cm
48 in. / 121.9 cm
121 lbs. / 54.8 kg
SHIPPING DIMENSIONS:
LC8500, LC8500HR
46 in. / 116.8 cm
23 in. / 58.4 cm
37 in. / 94 cm
LC8500R
Length
Width
Height
Weight
55 in. / 139.7 cm
27 in. / 68.6 cm
44 in. / 111.8 cm
159 lbs. / 72 kg
105 lbs. / 47.6 kg
32
33
34
|