6
BLENDER
KH 528
Blender
Operating instructions
KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM
ID-Nr.: KH528-12/09-V2
CONTENT
PAGE
Safety Notices
Intended Use
2
2
3
3
3
3
3
Technical data
Unpacking
Items supplied
Appliance description
Preparing for use
Operation
4
4
4
4
5
Filling and mounting the mixer jug
Selecting operating speeds
Filling when in use
Removing the mixer
Useful tips
5
Cleaning
5
5
6
6
Cleaning the mixer
Cleaning the motor block
After cleaning
Storage
6
7
7
7
Disposal
Warranty & Service
Importer
Read the operating instructions carefully before using the appliance for the first time and preserve this
booklet for later reference. Pass the manual on to whomsoever might acquire the appliance at a later date.
- 1 -
BLENDER KH528
• NEVER operate the appliance when it is empty,
i.e. without ingredients in the mixing attachment.
Safety Notices
ƽ To reduce the risk of fire or injury:
• NEVER insert your hand or fingers in the mixing
jug, especially when it is in use. The cutters are
extremely sharp!
ƽ To avoid the risk of a potentially
fatal electric shock:
• Ensure that the motor block, the power cable and
the power plug are never submersed in water or
other fluids.
• Only use the appliance in dry rooms, never use
it outdoors or in moist environments.
• Make sure that the power cable never becomes
wet or damp during operation. Lay the cable
such that it does not get clamped or otherwise
damaged.
• DO NOT open the cover when the appliance is
in operation. Should you do so, pieces of the
foodstuff could be thrown out at high speeds!
• Do not insert cutlery items or mixing tools into
the mixing jug when the appliance is in use.
There is a considerable risk of injury should these
make contact with the swiftly rotating cutters!
• In order to be able to react immediately in the
event of danger, always have the appliance
under supervision when it is in use.
• Arrange for defective power plugs and/or cables
to be replaced at once by qualified technicians
or our Customer Service Department.
• This appliance is not intended for use by indivi-
duals (including children) with restricted physical,
physiological or intellectual abilities or deficiences
in experience and/or knowledge unless they are
supervised by a person responsible for their safety
or receive from this person instruction in how the
appliance is to be used.
• Always remove the plug from the power socket
after use. Switching off the appliance is not suffi-
cient because the appliance receives power as
long as the power plug is connected to the socket.
• Check to ensure that the appliance is in a service-
able condition before taking it into use. The ap-
pliance may not be used if there is recognisable
damage on it, especially to the motor block and
the glass mixing jug.
• Immediately remove the plug from the socket
should you hear or smell anything unexpected
from the appliance when it is in use or there is
an evident malfunction.
• Children should be supervised to ensure that
they do not play with the appliance.
Intended Use
This appliance is intended for ...
– the mixing, blending and stirring of foodstuffs
as well as the crushing of ice cubes,
– exclusively for normal domestic amounts and
only for private use in a domestic environment
in dry rooms.
ƽ To avoid overheating and the
risk of fire:
• Do not use the appliance in locations with direct
sunlight or in the vicinity of heat generating ap-
pliances.
This appliance is not intended for ...
– the hacking of hard foodstuffs, such as nuts,
seeds, large kernels or stalks,
– the processing of materials that are not foodstuffs,
– utilisation for commercial or industrial purposes,
– for use in moist environments or outdoors.
• NEVER fill the mixing jug with boiling fluids or ot-
her foods!
Allow these to cool to a handwarm temperature.
Otherwise, the appliance could overheat and/
or the glass of the mixing jug could crack!
- 2 -
Use only the accessories and spare parts that are
specified for this appliance. Other parts are possibly
not sufficiently suitable or safe!
Items supplied
After unpacking, check to ensure all items are
avail-able. Being supplied are:
1 x Motor block, with power cable and plug
1 x Mixer jug, with permanently assembled cutters
1 x Lid
Technical data
Nominal voltage: 220 - 240 V 50 Hz
~
Nominal power
1 x Filling cap
1 x Operating instruction
consumption:
550 Watt
Max. capacity: 1.75 l
Protection class: II
Appliance description
CO time:
3 Minutes
Filling cap
Cover
Mixer jug
Cutter
q
w
e
r
t
y
u
i
o
The C.O. Time (Continuous Operation) details how
long an appliance may be used without the motor
overheating and being damaged. When the specified
C.O. Time has been reached, the appliance must be
switched off until the motor has cooled itself down.
Switch
Power cable
Motor block
Cable storage
Scale
Unpacking
• Remove all packaging materials or protective fo-
ils from the appliance. Retain the packaging, so
that you can store the appliance with protection
or send it by post, e.g. should it need repair.
• Before taking the appliance into use, check to
ensure that it is free of damage, check also that
the power cable and plug as well as all accesso-
ries and appliance parts are undamaged.
• Carefully clean all components before taking the
appliance into use for the first time
Preparing for use
When all components have been cleaned as described
under “Cleaning”:
Position the appliance such that, ...
➩
– that the power cable
passes through the re-
y
cess at the rear of the appliance,
– the power plug is immediately accessible, so that
it can be quickly withdrawn in the event of
danger.
(see “Cleaning”).
– the appliance stands firmly and without risk of
slipping or tipping when under vibration.
– that the power cable
is not in the working
y
area and thus not presenting a risk of being inad-
vertently snagged and tipping the appliance
over.
- 3 -
Operation
Selecting operating speeds
When the mixer jug
is filled, completely sealed
e
and securely fitted to the motor block , you can
u
ƽ Warning!
then switch the appliance on.
The motor switches itself off as soon as the mixing
jug
is removed from the motor block . It could
Place the switch
– Level 1-3
on ...
e
u
➩
t
then be overlooked that the appliance is still swit-
ched on. The motor will thus start of its own accord
for fluid or soft foodstuffs, for mixing, blending
and stirring
– Level 3-5
for firmer foodstuffs or for hacking
– Level Ice Crush/Clean
as soon as the mixing jug
Therefore:
is replaced on it:
e
• First insert the power plug into the wall socket
when the mixer jug is filled and mounted with
for short, powerful impulse operation, e.g. for
crushing icecubes or when cleaning. So as not
e
its lid fitted and closed.
• Before mounting the mixing jug always check to
see that the appliance is switched off or that the
power plug has been removed.
to overburden the motor, the switch
does not
t
engage in this position. Hence, hold the switch
in this position for short periods only.
t
• Before removing the mixer jug , switch the ap-
e
pliance off, remove the power plug and wait for
the motor to stop revolving.
Notice
Fill the mixer attachment
with a maximum of
e
180 g of ice cubes. If filled with more than this, the
Filling and mounting the mixer jug
appliance cannot optimally crush them.
ake the mixer attachment
from the motor unit
➩
e
.
and remove the lid
Filling when in use
u
w
Fill the mixer attachment
and then press the
➩
e
lid
firmly back onto the mixer attachment
.
e
ƽ Warning!
w
Ensure that the pourer nose on the mixer attach-
Should you wish to insert further foodstuffs during
ment is also closed.
operation, you may ONLY open the filling cap
provided for this purpose.
e
q
Insert the filling cap
into the lid opening and
➩
➩
q
secure it by turning it clockwise.
Place the ready filled and sealed mixer jug
• Under no circumstance should you open the lid
. Pieces of the foodstuff could be thrown out at
e
w
onto the motor block . Lightly turn the mixer
high speeds!
u
jug
until you can press it down. The motor
• Do not insert cutlery items or mixing tools into
e
can start only when the mixer jug
positioned.
is securely
the mixing jug
There is a considerable risk of injury should these
when the appliance is in use.
e
e
make contact with the swiftly rotating cutters
To insert something when the appliance is in
operation, ...
!
r
turn the filling cap
ve it.
anti-clockwise and remo-
➩
q
Afterwards, replace the filling cap
lid and secure it by turning it clockwise.
into the
➩
q
- 4 -
Removing the mixer
When the processing of the foodstuffs is complete:
Cleaning
Always first place the switch
into the OFF
➩
t
position ("0") and remove the power plug.
Wait until the motor has come to a complete
ƽ Caution!
Before starting to clean the liquidiser and its
components:
➩
standstill before lifting the mixer jug
up. It does not need to be turned.
straight
e
• Ensure that the motor is switched off and the
power plug removed from the socket.
Useful tips
Under no circumstance may the motor block
be submersed in water or other fluids.This
u
– The best results when blending firm ingredients
are achieved by placing small portions one after
could result in you receiving a fatal electric
shock and the appliance could be damaged.
the other into the mixer jug
ting a single large portion.
– When processing firm ingredients, cut them into
small pieces (2-3 cm).
instead of inser-
e
• Never open the housing of the appliance. This
brings with it the risk of receiving a fatal electric
shock.
– When mixing liquid ingredients begin first of all
with a small measure of fluids. Gradually add
more fluids to the mixture through the filling cap.
– The appliance can be stabilised by placing your
hand on top of the closed liquidiser during opera-
tion.
• Never disassemble the cutters
and never re-
r
ach into the mixer jug . The cutters
are ex-
e
r
tremely sharp!
• Do not use solvents or abrasive cleaners on the
plastic surfaces, they could be damaged by them.
– For the stirring of firm or very viscous foodstuffs
it can be beneficial to use the impulse-operation,
Cleaning the mixer
So that you do not injure yourself on the cutters
➩
which helps avoid a blocking of the cutters
.
, clean the mixer jug
only with a long
r
r
e
handled dishwasher brush.
In a case of stubborn soiling, the mixer jug
can also be cleaned in a dishwasher. For this,
Notice
➩
e
Do not use the appliance to crush grains of cooking
salt, refined sugar or white sugar. For example, to
make powdered sugar.
always take the mixing jug
described later.
apart, as
e
Clean the lid
washer or with the normal washing up.
and the filling cap
in a dish-
➩
w
q
If you clean the liquidiser directly after use, you can
often achieve a satisfactory and hygienic level of
cleaning with the following alternative:
Fill the mixer jug with water, close the lid
➩
e
w
and place the mixer jug
on the motor block
e
.
u
Insert the power plug into the wall socket and
activate the Ice Crush/Clean switch, causing the
cutters
to rotate in the water with maximum
r
revolutions.
- 5 -
Should this not dislodge the soiling, you can separate
the lower plastic part of the mixer jug (with the cut-
Cleaning the motor block
Use a dry cloth or, at the most, a lightly moistened
one for cleaning the plastic surfaces.
e
➩
ters ) from the the glass part:
r
At every cleaning check that the contact switch
➩
in the receptor for the mixer jug
is not blok-
e
ked by soiling residues. If you cannot dislodge
any blockages with the corner of a piece of pa-
per, make contact with Customer Services. Un-
der no circumstances should you use a hard ob-
ject, this could damage the contact switch.
Remove any possible residues on the underside
Ạ
➩
of the motor block
only with a dry cloth or a
u
stiff bristled brush. Ensure that nothing can enter
through the ventilation opening of the appliance.
ạ
After cleaning
Allow all parts to dry well before re-assembling and
re-using the liquidiser.
Ả
ả
Remove the mixer jug
from the motor block
Storage
➩
➩
e
.
u
Turn the plastic element ả of the mixer attach-
If you do not intend to use the liquidiser for an
extended period, clean it thoroughly (see chapter
"Cleaning").
➩
ment anti-clockwise, such that it allows itself to
e
be released from the glass element Ạ.
Wrap the power cable
around the cable sto-
➩
➩
y
ƽ Attention!
rage
on the base of the motor block
.
u
i
Take care with the cutters Ả. They are very sharp.
Risk of injury!
Store the liquidiser at a cool and dry location.
Clean both parts thoroughly in a mild soapy
solution or in a dishwasher.
➩
➩
Replace the plastic part ả of the mixer jug
e
back onto the glass part Ạ. Ensure that the sea-
ling ring ạ is correctly fitted.
- 6 -
Disposal
DES UK LTD
Tel.: 0871 5000 700 (£ 0.10 / minute)
e-mail: [email protected]
Do not dispose of the appliance in your
normal domestic waste. This product is
subject to the European guideline
2002/96/EC.
Kompernass Service Ireland
Tel: 1850 930 412 (0,082 EUR/Min.)
Standard call rates apply. Mobile operators may vary.
e-mail: [email protected]
Dispose of the appliance through an approved dis-
posal centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
44867 BOCHUM, GERMANY
Dispose of all packaging materials in an
environmentally responsible manner.
Warranty & Service
The warranty for this appliance is for 3 years from
the date of purchase. The appliance has been ma-
nufactured with care and meticulously examined be-
fore delivery. Please retain your receipt as proof of
purchase. In the event of a warranty claim, please
make contact by telephone with our Service Depart-
ment. Only in this way can a post-free despatch for
your goods be assured.
The warranty covers only claims for material and
maufacturing defects, but not for transport damage,
for wearing parts or for damage to fragile compo-
nents, e.g. buttons or batteries. This product is for
private use only and is not intended for commercial
use. The warranty is void in the case of abusive and
improper handling, use of force and internal tampe-
ring not carried out by our authorized service
branch. Your statutory rights are not restricted in
any way by this warranty.
The warranty period will not be extended by repairs
made under warranty. This applies also to replaced
and repaired parts. Any damage and defects extant
on purchase must be reported immediately after un-
packing the appliance, at the latest, two days after
the purchase date. Repairs made after the expira-
tion of the warranty period are subject to payment.
- 7 -
|