KODAK Mini HD Video Camera
Extended user guide
Model Zm2
For interactive tutorials:
For help with your camera:
Product features
Back view, Closing the door
LCD
Power
Scroll
Menu
Mode (Video/Picture)
OK, Record, Shutter
button
Strap post
• Scroll
• Digital Zoom + –
• Adjust volume
during video
playback.
Battery (not
user-replaceable)
Door
latch
Door
USB
USB
release
Important:
To prevent breakage,
push at a 45-degree angle.
ii
Charging the battery (1 – 2 hours).................................................................1
Inserting a MICROSD or MICROSDHC Card....................................................2
Connecting the strap.....................................................................................3
Turning on the camera ..................................................................................4
Setting the date/time.....................................................................................4
2 Using your camera ................................................................................5
Taking videos and pictures ............................................................................5
Reviewing, deleting pictures and videos.........................................................6
Changing settings.........................................................................................7
Transferring, editing, sharing online...............................................................8
3 Getting help ..........................................................................................9
Troubleshooting............................................................................................9
Getting help on the Web.............................................................................11
4 Appendix .............................................................................................12
Specifications..............................................................................................12
Safety .........................................................................................................13
Care and maintenance ................................................................................14
Limited warranty.........................................................................................15
Regulatory compliance ................................................................................16
iv
1 Setting up your camera
Charging the battery (1 – 2 hours)
Charge the battery when necessary. Turn off the camera, first.
Make sure the computer is turned on and
not in sleep, standby, or hibernate mode.
1
4
2
3
Slide the USB release to the right.
If necessary, gently pull out the USB until it locks.
To retract the USB, slide the USB release to
the right and push in the USB until it locks.
Close the door properly
Check battery level
See page ii
See the battery icon on the LCD
Learn more about USB charging
1
Setting up your camera
Inserting a MICROSD or MICROSDHC Card
Your camera has limited internal memory—good for a few practice videos/pictures.
Maximum supported card size is 16 GB.
NOTE: The included MICROSD Card is already inserted.
CAUTION:
A card can only be inserted one way; forcing it may cause damage.
Inserting or removing a card while the camera is on may damage the
video/pictures, the card, or the camera.
Turn off the camera.
1
2
Insert the card until
it clicks and locks
into place.
To remove the card,
push and release it,
then pull it out.
Metal
contacts
face up.
NOTE: Avoid touching the
card’s metal contacts.
To clean the contacts, use a dry
cotton swab or a lint-free cloth.
Close the door properly
Purchase accessories
See page ii
2
Using your camera
Reviewing, deleting pictures and videos
Menu
OK
Review
pictures,
videos
.
1
2
Press the Menu button
Press
• Press
to highlight Review
to scroll through pictures/videos.
, then press OK.
• Press OK to play a video or zoom a picture.
• Press
• Press
to adjust volume during playback.
to navigate a zoomed picture.
Press Menu to return to recording mode.
Delete
pictures,
videos
.
1
2
Press the Menu button
Press
Press
to highlight Review
to scroll through pictures/videos.
, then press OK.
, then press OK.
Press
to highlight Delete
3
Follow the prompts to delete the picture/video.
Press Menu to return to recording mode.
6
Using your camera
Transferring, editing, sharing online
1 Turn on the camera, then connect it.
Slide the USB release to the right.
Pull the USB out until it locks.
To retract the USB, slide the
USB release to the right and
push the USB in until it locks.
2 If this is the first time you’ve connected to this WINDOWS OS-based computer,
you’re prompted to install ARCSOFT MEDIAIMPRESSION SE for KODAK Software.
You can then transfer and share videos and pictures.
MAC OS—Videos and pictures can be used with the APPLE iLIFE suite of products.
WINDOWS VISTA/XP—Follow the prompts.
WINDOWS 7—Choose Open Folder To View Files.
Launch MI.exe, then click Yes on the User Account Control window.
Close the door properly
See page ii
Get ArcSoft product support
8
3 Getting help
Troubleshooting
Icon
Solution
■
■
Low battery. Charge the battery.
Corrupt or unusable file(s). Transfer videos/pictures to your computer, then
format the card or internal memory.
■
■
Internal memory is full. Transfer videos/pictures to your computer, or use a
MICROSD/SDHC Card to take more videos/pictures.
Card is full. Transfer videos/pictures to your computer or use another card.
Unrecognized file. Transfer videos/pictures to your computer.
■
■
An error has occurred. Transfer videos/pictures to your computer, then format
the card.
9
Getting help
Problem
Solution
Camera will not turn on. ■ Ensure that the battery is charged.
■ Ensure the camera is clean and dry. (If it’s wet inside, let it dry
for 24 hours.)
Videos are choppy or
jumpy when played on a
computer.
■ Use ARCSOFT MEDIAIMPRESSION SE for KODAK Software for
video playback (see page 8).
Videos are blurry.
■ Ensure that the lens is clean.
■ Ensure that the subject is at least 1 m (3.3 ft) from the lens.
to their support sites.)
MEDIAIMPRESSION SE for
KODAK Software.
NOTE: If problems persist, go to www.kodak.com/go/support and click Step-by-Step Solutions & Repair.
10
4 Appendix
Specifications
Image Sensor—1/4-inch CMOS
Lens—f/2.8; 35 mm equivalent: 39 mm
Zoom—3X digital
LCD—4.6 cm (1.8 in.); 61.4K pixels
Image Storage—128 MB internal memory (approximately 64 MB available for
image storage. 1 MB equals one million bytes); optional MICROSD/SDHC Card
(The SD logo is a trademark of the SD Card Association.) Maximum supported
size: 16 GB MICROSD/SDHC.
Focusing System—Fixed
Focus Range—50 cm (1.6 ft)–infinity
White Balance—Auto
Exposure—Auto
File Format—■ Video: .AVI Motion JPEG; 1280 x 720 @ 24 fps and
640 x 480 @ 30 fps
■ Audio: PCM, 16 KHz
■ Still: JPEG/EXIF V2.21; 922 KP (1280 x 720)
Shutter Speed—Auto
Microphone—Mono
Speaker—Yes
I/O Interface—USB 2.0 (high speed)
Tripod Mount—No
12
Appendix
Power—Internal, rechargeable Li-Ion battery; in-camera charging via USB connector
Battery life—Approximately one hour
Waterproof capability—Conforms to IEC60529 IPX8, up to 3 meters (9.8 ft)
Dust resistance—Conforms to IEC60529 IP6X
Size—9.5 x 85 x 56 mm (0.4 x 3.3 x 2.2 in.)
Weight—70 g (2.5 oz) with battery, card
Operating temperature—0–40° C (32–104° F); do not expose camera to higher
temperatures.
Safety
CAUTION:
Do not disassemble this product; there are no user-serviceable parts
inside. Refer servicing to qualified service personnel. KODAK AC
Adapters and battery chargers are intended for indoor use only. The
use of controls, adjustments, or procedures other than those specified
herein may result in exposure to shock and/or electrical or mechanical
hazards. If the LCD breaks, do not touch the glass or liquid. Contact
Kodak customer support.
■ The use of an accessory that is not recommended by Kodak may cause fire, electric
shock, or injury. For approved accessories, go to
■ Use only a USB-certified computer equipped with a current-limiting motherboard.
Contact your computer manufacturer if you have questions.
■ In the unlikely event that battery fluid leaks onto your skin, wash immediately with
water and contact your local health provider. For additional health-related
information, contact your local Kodak customer support.
13
Appendix
included on the candidate list according to article 59(1) of Regulation (EC) No.
1907/2006 (REACH).
■ If using this product in an airplane, observe all instructions of the airline.
Care and maintenance
■ Before inserting or removing a card, make sure your hands, the camera, and the
card are completely dry.
■ If water has entered the camera, remove the card. Allow all components to air-dry
for at least 24 hours before using the camera.
■ Wipe off dirt or sand from the door seals—debris could compromise the seal and
cause a leak in water.
■ Do not subject the camera to temperatures lower than 0 (32°F) or higher than
40°C (104°F) for an extended time—the integrity of the seals may be
compromised. Wait until camera reaches operating temperatures before using.
■ Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft,
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions
unless designed specifically for camera lenses. Do not allow chemicals, such as
suntan lotion, to contact painted surfaces.
■ Service agreements may be available in your country. Contact a dealer of KODAK
Products for more information.
■ For camera disposal or recycling information, contact your local authorities. In the
14
Appendix
Limited warranty
Kodak warrants its digital cameras and accessories (excluding removable batteries) to
be free from malfunctions and defects in both materials and workmanship for the
warranty period specified on your KODAK Product packaging. Retain the original
dated sales receipt. Proof of purchase date is required with any request for warranty
repair.
Limited warranty coverage
Warranty service is only available from within the country where the Products were
originally purchased. You may be required to ship Products, at your expense, to the
authorized service facility for the country where the Products were purchased. Kodak
will repair or replace Products if they fail to function properly during the warranty
period, subject to any conditions and/or limitations stated herein. Warranty service
will include all labor as well as any necessary adjustments and/or replacement parts. If
Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the
purchase price paid for the Product provided the Product has been returned to Kodak
along with proof of the purchase price paid. Repair, replacement, or refund of the
purchase price are the sole remedies under the warranty. If replacement parts are
used in making repairs, those parts may be remanufactured, or may contain
remanufactured materials. If it is necessary to replace the entire Product, it may be
replaced with a remanufactured Product. Remanufactured Products, parts and
materials are warranted for the remaining warranty term of the original Product, or 90
days after the date of repair or replacement, whichever is longer.
Limitations
This warranty does not cover circumstances beyond Kodak's control. This warranty
does not apply when failure is due to shipping damage, accident, alteration,
modification, unauthorized service, misuse, abuse, use with incompatible accessories
or attachments (such as third party ink or ink tanks), failure to follow Kodak's
operation, maintenance or repacking instructions, failure to use items supplied by
Kodak (such as adapters and cables), or claims made after the duration of this
warranty. Kodak makes no other express or implied warranty for this product. In the
event that the exclusion of any implied warranty is ineffective under the law, the
15
Appendix
duration of the implied warranty will be the length of the express warranty period
specified on your KODAK Product packaging. The option of repair, replacement, or
refund is Kodak's only obligation. Kodak will not be responsible for any special,
consequential or incidental damages resulting from the sale, purchase, or use of this
product regardless of the cause. Liability for any special, consequential or incidental
damages (including but not limited to loss of revenue or profit, downtime costs, loss
of the use of the equipment, cost of substitute equipment, facilities or services, or
claims of your customers for such damages resulting from the purchase, use, or failure
of the Product), regardless of cause or for breach of any written or implied warranty is
expressly disclaimed. The limitations and exclusions of liability set forth herein apply
to both Kodak and its suppliers.
Your rights
Some states or jurisdictions do not allow exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
Some states or jurisdictions do not allow limitations on how long an implied warranty
lasts, so the above limitation may not apply to you. This warranty gives you specific
rights, and you may have other rights which vary from state to state or by jurisdiction.
Regulatory compliance
FCC compliance and advisory
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed or used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: 1) reorient or relocate the
receiving antenna; 2) increase the separation between the equipment and the
16
Appendix
receiver; 3) connect the equipment to an outlet on a circuit different from that to
which the receiver is connected; 4) consult the dealer or an experienced radio/TV
technician for additional suggestions. Any changes or modifications not expressly
approved by the party responsible for compliance could void the user’s authority to
operate the equipment. Where shielded interface cables have been provided with the
product or specified additional components or accessories elsewhere defined to be
used with the installation of the product, they must be used in order to ensure
compliance with FCC regulation. The KODAK High Performance USB AC Adapter
K20-AM complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
17
Index
A
accessories, purchase, 11
B
battery charging, 1
button
Kodak Web sites, 9
reset, i
USB release, i
C
camera settings, 7
card, loading, 2
care and maintenance, 14
cautions, 14
changing settings, 7
charging battery, 1
clock, setting, 4
connecting the strap, 3
connecting to a computer, 8
M
maintenance, camera, 14
microphone, i
on/off, 4
P
pictures
D
deleting, 6
reviewing, 6
taking, 5
date setting, 4
deleting pictures, videos, 6
digital zoom, 5
disposal, recycling, 14
playing a video, 6
R
E
recycling, disposal, 14
release, USB, i
repair, 11
reset button, i
reviewing pictures, videos, 6
erase pictures, videos, 6
H
help, Web links, troubleshooting, 9
18
Index
S
setting date and time, 4
setting up the camera, 1
settings, camera, 7
sharing online, 8
software, installing, 8
specifications, 12
status icons, iii
strap, 3
T
taking pictures, videos, 5
time and date, setting, 4
tips, care, & maintenance, 14
transferring videos, 8
troubleshooting, 9
turning on/off camera, 4
U
URLs, Kodak Web sites, 9
USB
connection, 8
release, i
V
videos
deleting, 6
reviewing, 6
taking, 5
W
warranty, 15
Z
zoom, using, 5
19
|