DOUBLE DIN SIZED CD/CASSETTE RECEIVER
-
DPX MP4030
INSTRUCTION MANUAL
-
DPX 3030S
-
DPX 3030
© B64-2319-10/05 (M;TKR)
Safety precautions
IMPORTANT INFORMATION
2WARNING
2CAUTION
About the disc changer/CD player to
To prevent injury or fire, take the
following precautions:
• Insert the unit all the way in until it is fully
locked in place. Otherwise it may fall out of
place when jolted.
• When extending the ignition, battery, or
ground wires, make sure to use automotive-
grade wires or other wires with a 0.75mm2
(AWG18) or more to prevent wire
deterioration and damage to the wire
coating.
• To prevent a short circuit, never put or leave
any metallic objects (such as coins or metal
tools) inside the unit.
To prevent damage to the machine,
take the following precautions:
• Make sure to ground the unit to a negative
12V DC power supply.
• Do not open the top or bottom covers of the
unit.
• Do not install the unit in a spot exposed to
direct sunlight or excessive heat or humidity.
Also avoid places with too much dust or the
possibility of water splashing.
• When replacing a fuse, only use a new one
with the prescribed rating. Using a fuse with
the wrong rating may cause your unit to
malfunction.
• To prevent a short circuit when replacing a
fuse, first disconnect the wiring harness.
• Do not use your own screws. Use only the
screws provided. If you use the wrong
screws, you could damage the unit.
be connected:
To connect a disc changer having the "O-N"
switch to this unit, set the "O-N" switch to "N".
Note that none of the KDC-C100, KDC-C302,
C205, C705, and non-Kenwood CD changers
can be connected.
You can damage both your unit and the CD
changer if you connect them incorrectly.
Precautions when connecting disc
changers/CD players released in 1997 or
earlier.
When you connect a model with no "O-N"
switch, the converter cord CA-DS100 available
as an option may be required. For details,
consult your Kenwood dealer.
A disc changer doesn't work when it is
connected without using these options.
If a model with no "O-N" switch is connected,
some unavailable functions and information
that cannot be displayed are generated.
• If the unit starts to emit smoke or strange
smells, turn off the power immediately and
consult your Kenwood dealer.
• Make sure not to get your fingers caught
between the faceplate and the unit.
• Be careful not to drop the unit or subject it to
strong shock.
The unit may break or crack because it
contains glass parts.
• Do not touch the liquid crystal fluid if the
LCD is damaged or broken due to shock. The
liquid crystal fluid may be dangerous to your
health or even fatal.
Do Not Load 3-in. CDs in the CD slot
If you try to load a 3 in. CD with its adapter
into the unit, the adapter might separate from
the CD and damage the unit.
If the liquid crystal fluid from the LCD
contacts your body or clothing, wash it off
with soap immediately.
Manufactured under license from Dolby
Laboratories.
“Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
— 3 —
Safety precautions
Cleaning the Unit
The marking of products using lasers
(Except for some areas)
NOTE
If the faceplate of this unit is stained, wipe it
with a dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain
off with a cloth moistened with neutral
cleaner, then wipe neutral detergent off.
Applying spray cleaner directly to the unit may
affect its mechanical parts. Wiping the
• If you experience problems during
installation, consult your Kenwood dealer.
CLASS 1
LASER PRODUCT
• If the unit does not seem to be working
right, try pressing the reset button first. If
that does not solve the problem, consult
your Kenwood dealer.
• Press the reset button if the Disc auto
changer fails to operate correctly. Normal
operation should be restored.
The label is attached to the chassis/case and
says that the component uses laser beams
that have been classified as Class 1. It
means that the unit is utilizing laser beams
that are of a weaker class. There is no
danger of hazardous radiation outside the
unit.
faceplate with a hard cloth or using a volatile
liquid such as thinner or alcohol may scratch
the surface or erases characters.
Cleaning the CD Slot
As dust tends to accumulate in the CD slot,
clean it every once in a while. Your CDs can
get scratched if you put them in a dusty CD
slot.
DISC
DISP
NAME
COLOR
S.A
SRC
AUD
SCN
PWR OFF
B.NR
SCRL
MTL
FNC
B.S
M.RDM
RDM
REP
ATT
Reset button
• Characters in the LCD may become difficult
to read in temperatures below 41 ˚F (5 ˚C).
• The illustrations of the display and the panel
appearing in this manual are examples used
to explain more clearly how the controls are
used. Therefore, what appears on the display
in the illustrations may differ from what
appears on the display on the actual
equipment, and some of the illustrations on
the display may represent something
impossible in actual operation.
Lens Fogging
Right after you turn on the car heater in cold
weather, dew or condensation may form on
the lens in the CD player of the unit. Called
lens fogging, CDs may be impossible to play.
In such a situation, remove the disc and wait
for the condensation to evaporate. If the unit
still does not operate normally after a while,
consult your Kenwood dealer.
— 4 —
About CDs
About Cassette tape
Handling CDs
• Don’t touch the recording surface of the CD.
CD cleaning
Clean from the center of the disc and move
outward.
Cleaning the tape head
When there’s noise or the sound quality is bad
during tape play the tape head maybe dirty,
clean the tape head.
About Cassette tape
• If the tape is slack tighten it.
• If the cassette tape label is peeling off glue it
on again.
• Don’t use deformed cassette tape.
• Don’t place cassette tape on the dashboard
etc. where the temperature is high.
Removing CDs
When removing CDs from this unit pull them
out horizontally.
• CD-R and CD-RW are easier to damage than
a normal music CD. Use a CD-R or a CD-RW
after reading the caution items on the
package etc.
• Don’t stick tape etc. on the CD.
Also, don’t use a CD with tape stuck on it.
• Don’t use cassette tape that’s 100 minutes
long or longer.
CDs that can’t be used
• CDs that aren’t round can’t be used.
When using a new CD
If the CD center hole or outside rim has burrs,
use it after removing them with a ball pen etc.
• CDs with coloring on the recording surface
or that are dirty can’t be used.
• Don’t use CDs without disc mark
.
Burrs
• A CD-R or CD-RW that hasn’t been finalized
can’t be played. (For the finalization process
refer to your CD-R/CD-RW writing software,
and your CD-R/CD-RW recorder instruction
manual.)
Burrs
CD storage
• Don’t place them in direct sunlight (On the
seat or dashboard etc.) and where the
temperature is high.
CD accessories
Don’t use disc type accessories.
• Store CDs in their cases.
— 5 —
Notes on playing MP3 (DPX-MP4030)
This unit can play MP3(MPEG1, 2, 2.5 Audio Layer 3). Note,
however, that the MP3 recording media and formats acceptable
are limited. When writing MP3, pay attention to the following
restrictions.
Entering ID3 tag
The Displayable ID3 tag is ID3 version
1.x.
For the character code, refer to the
List of Codes.
Acceptable media
The MP3 recording media acceptable to this unit are CD-ROM, CD-R,
and CD-RW.
Entering file and folder names
When using CD-RW, do full format not quick format to prevent
malfunction.
The code list characters are the only
file names and folder names that can
be entered and displayed.
If you use any other character for
entry, the file and folder names are not displayed correctly. They may
neither be displayed correctly depending on the CD writer used.
The unit recognizes and plays only those MP3 which have the MP3
extension (.MP3).
Acceptable medium formats
The following formats are available for the media used in this unit. The
maximum number of characters used for file name including the
delimiter (".") and three-character extension are indicated in
parentheses.
• ISO 9660 Level 1 (12 characters)
• ISO 9660 Level 2 (31 characters)
• Joliet (64 characters)
• Romeo (128 characters)
A file with a name entered with characters not on the code list
may not play correctly.
Up to 200 characters can be displayed in the long file name format.
For a list of available characters, see the instruction manual of the
writing software and the section Entering file and folder names below.
The media reproducible on this unit has the following limitations:
• Maximum number of directory levels: 8
• Maximum number of files per folder: 255
• Maximum number of characters for folder name: 64
• Maximum number of folders: 50
Writing files into a medium
When a medium containing MP3 data is loaded, the unit checks all the
data on the medium. If the medium contains a lot of folders or non-
MP3 files, therefore, it takes a long time until the unit starts playing
MP3.
In addition, it may take time for the unit to move to the next MP3 file
or a File Search or Folder Search may not be performed smoothly.
Loading such a medium may produce loud noise to damage the speakers.
• Do no attempt to play a medium containing a non-MP3 file with the
MP3 extension.
The unit mistakes non-MP3 files for MP3 data as long as they have
the MP3 extension.
MP3 written in the formats other than the above may not be
successfully played and their file names or folder names are not
properly displayed.
Settings for your CD writer
• Do not attempt to play a medium containing non MP3.
When you use your CD writer to record MP3 up to the maximum disc
capacity, disable additional writing. For recording on an empty disc up
to the maximum capacity at once, check Disc at Once.
— 6 —
MP3 playing order
When a File Search is executed with file ¡$ being played ...
When selected for play, Folder Search, File Search, or for Folder
Select, files and folders are accessed in the order in which they were
written by the CD writer.
Operation of the button
¢ Button
Current
file number
4 Button
Beginning of file
Because of this, the order in which they are expected to be played
may not match the order in which they are actually played. You may be
able to set the order in which MP3 are to be played by writing them
onto a medium such as a CD-R with their file names beginning with
play sequence numbers such as "01" to "99", depending on your CD
writer.
When an Folder Search is executed with file ¡$ being played ...
Operation of the button
Current
folder number
AM Button
FM Button
For example, a medium with the following folder/ file hierarchy is
subject to Folder Search, File Search, or Folder Select as shown below.
Example of a medium's folder/file hierarchy
When Folder Select is selected with file ¡$ being played to move
from folder to folder ...
Operation of the button
Current
folder number
4 Button
¢ Button
AM Button
FM Button
Folder
File
Root
Level 1
Level 3
Level 2
Level 4
— 7 —
General features
Power
4
¢
u / d
DSP
EQ/AUD
SRC
FM/AM
Turning ON the Power
Press the [SRC] button.
Turning OFF the Power
Press the [SRC] button for at least 1 second.
DISC
Selecting the Source
DISP
NAME
COLOR
S.A
Press the [SRC] button.
Source required
Display
SRC
AUD
PWR OFF
B.NR
SCRL
MTL
M.RDM
FNC
B.S
Tuner
"TUNER"
SCN
RDM
REP
ATT
Tape
"TAPE"
CD
"CD"
External disc
Standby (Illumination only mode)
"CD-CH"/ "MD-CH"
"ALL OFF"
38
DISP/NAME
ATT
COLOR/S.A
#1 – 3
Volume
Equalizer type indicator
Increasing Volume
Press the [u] button.
Decreasing Volume
Press the [d] button.
ATT indicator
Source indicator
DSP indicator
Attenuator
Turning the volume down quickly.
Press the [ATT] button.
Each time the button is pressed the Attenuator turns ON or OFF.
— 8 —
When it’s ON, the "ATT" indicator blinks.
When operation stops for 10 seconds, the Equalizer type at that
time is registered and the Equalizer Control mode automatically
closes.
Equalizer Control
You can recall the best sound setting preset for different types of
the music.
Adjustment of Equalizer type at EASY
Adjusting the effect of an Equalizer type selected in <Equalizer
Control> when <Equalizer mode> is "EASY".
1 Enter the Equalizer Control mode
Press the [EQ] button.
"EQ EASY" or "EQ PRO" is displayed.
1 Refer to <Equalizer Control> (page 9) to select the Equalizer
type.
2 Select the Equalizer type
2 Adjust the effect
Press the [EQ] button.
Press the [FM] or [AM] button.
Each time the button is pressed, the effects of Equalizer switch
as shown below:
Each time the button is pressed, the Equalizer type switches as
shown below:
Equalizer type
Display
Setting of effect
Display
Rock
Dance
Jazz
Pops
Heavy
Soft
"Rock"
"Dance"
"Jazz"
"Pops"
"Heavy"
"Soft"
High
"Hi"
Medium
Low
"Mid"
"Lo"
Sharp
Light
Flat
"Sharp"
"Light"
"Flat"
• "User" display: The values set on the <Adjustment of Equalizer
type at PRO> (page 10).
• A selected Equalizer type can be adjusted.
Adjustment items depend on the setting of <Equalizer mode>
(page 24). Refer to <Adjustment of Equalizer type at EASY> (page
9) or <Adjustment of Equalizer type at PRO> (page 10) for details
of adjustment.
3 Exit the Equalizer Control mode
Press the [EQ] button for at least 1 second.
— 9 —
General features
Adjustment of Equalizer type at PRO
Memory preset of adjustment of Equalizer type
Adjusting the effect of an Equalizer type selected in <Equalizer
Control> when <Equalizer mode> is "PRO".
The <Adjustment of Equalizer type at PRO> can be preset.
1 Refer to <Adjustment of Equalizer type at PRO> (page 10) to
1 Refer to <Equalizer Control> (page 9) to select the Equalizer
adjust the Equalizer type.
type.
2 Preset the adjusted value
2 Select the item for adjustment
Press the [FM] or [AM] button.
Each time the button is pressed, the items that can be adjusted
Press the [#1] — [#3] button for at least 2 seconds.
Recalling a setting value
1 Enter the Equalizer Control mode
Press the [EQ] button.
"EQ PRO" is displayed.
switch as shown below.
3 Adjust the item
Press the [4] or [¢] button.
If "EQ EASY" is displayed, refer to <Equalizer mode> (page 24) to
set the mode to "EQ PRO".
Adjustment Item
Display
Range
Bass Center Frequency
Bass level
Bass Q Factor
Bass Extend
"Bas F"
"Bas LV"
"Bas Q"
"EXT"
60/70/80/100 or 150 Hz
–12 — +12 dB
1.00/1.25/1.50/2.00
On/Off
2 Recall the setting value
Press the [#1] — [#3] button.
Middle Center Frequency "Mid F"
0.5/1.0/1.5/2.0 kHz
–12 — +12 dB
1.0/2.0
Middle level
"Mid LV"
"Mid Q"
Audio Control
Middle Q Factor
1 Enter the Audio Control mode
Press the [AUD] button for at least 1 second.
"AUD mode" is displayed.
Treble Center Frequency "Tre F"
Treble level "Tre LV"
10.0/12.5/15.0/17.5 kHz
–12 — +12 dB
• According to the Bass Q Factor setting value, the frequencies that
can be set in Bass Center Frequency change as shown below.
2 Select the Audio item for adjustment
Press the [FM] or [AM] button.
Each time the button is pressed, the items that can be adjusted
Bass Q Factor
1.00/1.25/1.50
2.00
Bass Center Frequency
60/70/80/100
60/70/80/150
switch as shown below.
• When the Bass Extend is set to ON, low frequency response is
extended by 20%.
3 Adjust the Audio item
Press the [4] or [¢] button.
— 10 —
Adjustment Item
Display
Range
Spectrum Analyzer Select
Selecting the Spectrum Analyzer display.
Balance
Fader
Non Fader Output
"BAL"
"FAD"
"N-F"
Left 15 — Right 15
Rear 15 — Front 15
On/Off
1 Enter the Spectrum Analyzer Select mode
Press the [S.A] button for at least 1 second.
"SPEANA" is displayed.
4 Exit the Audio Control mode
Press the [AUD] button.
2 Select the Spectrum Analyzer
Press the [S.A] button.
Each time the button is pressed, the Spectrum Analyzers switch
as shown below:
DSP System
Setting the simulated Sound field effects of Digital Signal
Processor.
Spectrum Analyzer
Display
Scan of Spectrum Analyzer
Spectrum Analyzer 1 — 9
Sea Shore
"S.A Scan"
"SPEANA 1" — "SPEANA 9"
"Seashore"
1 Enter the DSP Control mode
Press the [DSP] button.
"DSP mode" is displayed.
Spectrum Analyzer Off
"S.A Off"
Scan of Spectrum Analyzer:
2 Select the Sound field effects
Press the [DSP] button.
Each time the button is pressed, the Sound field effects switch
The display switches from Spectrum Analyzer 1 to 9
and Sea Shore in sequence.
3 Exit the Spectrum Analyzer Select mode
as shown below:
Press the [S.A] button for at least 1 second.
When operation stops for 10 seconds, Spectrum Analyzer at that
time is registered and the Analyzer Select mode automatically
closes.
Sound field effects
Display
Stadium
Concert Hall
Club
"Stadium"
"Concert"
"Club"
Church
Studio
Bypass
"Church"
"Studio"
"Bypass"
When operation stops for 10 seconds, the DSP Control mode
closes.
Turn DSP System OFF
Press the [DSP] button for at least 1 second.
"DSP" indicator is OFF.
— 11 —
General features
• When operation stops for 10 seconds the name at that time is
registered, and Name Set mode closes.
• Memory numbers
Station/Disc Naming (SNPS/DNPS)
Attaching a title to a Station or CD.
- FM & AM: 30 stations
- Internal CD player: 10 discs
1 Receive/play the station/disc you want to attach a title to
• A title can't be attached to MD or MP3 media.
• Disc Naming can't be done during clock display.
- External CD changer/ player: Varies according to the CD changer/
player. Refer to the CD changer/ player manual.
• The title of station/CD can be changed by the same operation
used to name it.
2 Enter name set mode
Press the [NAME] button for at least 2 seconds.
"Name Set" is displayed.
3 Move the cursor to the enter character position
Press the [4] or [¢] button.
Switching Display
Switching the information displayed.
4 Select the character type
Press the [38] button.
Press the [DISP] button.
Each time the button is pressed the display switches as shown
below.
Each time the button is pressed the character type switches as
shown below.
Character type
In Tuner source
Alphabet upper case
Alphabet lower case
Information
Display
Frequency
Station name
Charactor
Clock
"SNPS"
5 Select the characters
Press the [FM] or [AM] button.
Characters can be entered by using a remote with a number
buttons.
Example: If "DANCE" is entered.
In CD & External disc source
Information
Display
Character
Button
#Times pressed
Track number & Track time
Track number & Disc play time
Disc name
Disc title (In External disc source or
DPX-MP4030 internal CD source)
Track title (In External disc source or
DPX-MP4030 internal CD source)
Charactor
Clock
"P-Time"
"A-Time"
"DNPS"
"D-Title"
"D"
"A"
"N"
"C"
"E"
[#3]
[#2]
[#6]
[#2]
[#3]
1
1
2
3
2
"T-Title"
6 Repeat steps 3 through 5 and enter the name.
7 Exit name set mode
Press the [NAME] button.
— 12 —
In MP3 source (DPX-MP4030)
Illumination Color Select
Setting the color of the display.
Information
Display
Track Time
Folder name
File name
"P-Time"
"Folder"
"File"
1 Enter the Illumination Color Select mode
Press the [COLOR] button.
Song title & Artist name
Album name
Charactor
"Title"
"Album"
"Illumi" is displayed.
2 Select the Illumination Color
Press the [COLOR] button.
Each time the button is pressed, the Illumination Color switches
Clock
In Tape source
as shown below:
Information
Illumination Color
Display
Play side & Tape counter
Charactor
Clock
Scan of "Blue" to "Mint"
Blue
Mars Red
White
"V.Color"
"Blue"
"Mars Red"
"White"
In ALL OFF Mode
Information
Lavender
Muscat
Pink
Sky Blue
Lime
"Lavender"
"Muscat"
"Pink"
"Sky Blue"
"Lime"
Charactor & Graphic
Clock & Graphic
Clock
Violet
"Violet"
Aqua
"Aqua"
Orange
Mint
"Orange"
"Mint"
User Color
"R-X/G-X/B-X"
"User Color" enables the color set in <User Illumination Color
Setting> (page 14) to be recalled.
3 Exit the Illumination Color Select mode
Press the [COLOR] button for at least 1 second.
When operation stops for 10 seconds, the Illumination Color at
that time is registered and the Illumination Color Select mode
automatically closes.
— 13 —
General features
User Illumination Color Setting
Adjusting Clock
The Illumination Color by the adjustment of RGB can arbitrarily
set.
1 Select the clock display
Press the [DISP] button.
1 Enter the Illumination Color Select mode
Press the [COLOR] button.
"Illumi" is displayed.
2 Enter clock adjustment mode
Press the [DISP] button for at least 1 second.
The ‡ indicator blinks.
2 Select the Color for adjustment
Press the [4] or [¢] button.
3 Adjust the hours
Press the [FM] or [AM] button.
Each time the button is pressed, the colors that can be adjusted
switch as shown below:
Adjust the minutes
Press the [4] or [¢] button.
Adjustment Color
Display
4 Exit clock adjustment mode
Red
Green
Blue
"R" is blinks
"G" is blinks
"B" is blinks
Press the [DISP] button.
3 Adjust the Color
Press the [FM] or [AM] button.
Each time the button is pressed, the intensity of color changes
as shown below:
Intensity of color
Display
Turning off
Weak
"X-0"
"X-1"
Dark
"X-4"
4 Exit the Illumination Color Select mode
Press the [COLOR] button for at least 1 second.
When operation stops for 10 seconds, the Illumination Color at
that time is determined and the Illumination Color Select mode
automatically closes.
— 14 —
Tuner features
Tuning
4
¢
SRC
FM/AM
Selecting the station.
1 Select tuner source
Press the [SRC] button.
Select the "TUNER" display.
2 Select the band
DISC
Press the [FM] or [AM] button.
Each time the [FM] button is pressed it switches between the
FM1, FM2, and FM3 bands.
DISP
NAME
COLOR
S.A
3 Tune up or down band
SRC
AUD
SCN
PWR OFF
Press the [4] or [¢] button.
B.NR
SCRL
MTL
M.RDM
FNC
B.S
RDM
REP
ATT
During reception of stereo stations the "ST" indicator is ON.
#1 – 6
FNC
Direct Access Tuning (Function of remote)
Entering the frequency and tuning.
1 Select the band
Band display
Frequency display Preset station number
Press the [FM] or [AM] button.
2 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote.
"– – – –" is displayed.
3 Enter the frequency
Press the number buttons on the remote.
Example:
Desired frequency
Press button
ST indicator
92.1 MHz (FM)
810 kHz (AM)
[#0], [#9], [#2], [#1]
[#0], [#8], [#1], [#0]
Canceling Direct Access Tuning
Press the [DIRECT] button on the remote.
— 15 —
Tuner features
Station Preset Memory
Preset Tuning
Putting the station in the memory.
Calling up the stations in the memory.
1 Select the band
1 Select the band
Press the [FM] or [AM] button.
Press the [FM] or [AM] button.
2 Select the frequency to put in the memory
2 Call up the station
Press the [4] or [¢] button.
Press the [#1] — [#6] button.
3 Put the frequency in the memory
Press the [#1] — [#6] button for at least 2 seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the memory on each [#1]
— [#6] button.
Frequency Step Setting
Changing the tuning frequency step.
The original setting is FM band 50 kHz, and AM band 9 kHz.
1 Turn the power OFF
Press the [SRC] button for at least 1 second.
Auto Memory Entry
Putting a station with good reception in the memory
automatically.
2 Switch the frequency step
While pressing the [#1] and [#5] button, press the [SRC]
button.
1 Select the band for Auto Memory Entry
The frequency step changes to FM band 200 kHz, and AM band
10 kHz.
Press the [FM] or [AM] button.
• When the same operation is repeated, it returns to the original
setting.
• When the frequency step is switched, the frequencies in the
memory are deleted.
2 Enter Function mode
Press the [FNC] button for at least 1 second.
"Function" is displayed.
3 Select the Auto Memory Entry mode
Press the [FM] or [AM] button.
Select the "A-Memory" display.
4 Open Auto Memory Entry
Press the [4] or [¢] button for at least 2 seconds.
When 6 stations that can be received are put in the memory
Auto Memory Entry closes.
— 16 —
Cassette player features
Playing Cassette Tapes
4
¢
SRC
0
FM/AM
When the Cassette Tape is inserted
Press the [SRC] button.
Select the "TAPE" display.
When there's a Cassette Tape inserted, the
indicator is ON.
When you want to listen to the reverse side
DISC
Press the [38] button.
Eject the Cassette Tape
DISP
NAME
COLOR
S.A
Press the [0] button.
SRC
AUD
SCN
PWR OFF
B.NR
SCRL
MTL
FNC
B.S
M.RDM
RDM
REP
ATT
Fast Forwarding and Rewinding
38
B.NR SCN
B.S
REP
MTL
Fast Forwarding
Press the [FM] button.
When it's stopped press the [38] button.
Rewinding
Press the [AM] button.
When it's stopped press the [38] button.
Dolby B NR
indicator
indicator
Tape counter display
Scan indicator
Dolby B NR
Press the [B.NR] button.
Each time the button is pressed the Dolby B NR turns ON or
OFF.
When it's ON, "B NR On" is displayed.
Repeat indicator
Blank Skip indicator
MTL indicator
— 17 —
Cassette player features
1 Designate the song to skip
Selecting the Tape type
Press the [MTL] button.
Press number buttons on the remote.
2 Skipping to a later song
Each time the button is pressed the Tape type switches as
shown below.
Press the [¢] button.
"MTL" indicator
Tape type
Skipping to a previous song
ON
CrO2 (Type II), FeCr (Type III),
Metal (Type IV)
Normal (Type I)
Press the [4] button.
Canceling DPSS
OFF
Press the [38] button.
• During the songs first 5 seconds there may be a times when the
previous track is recognized as the current track.
• As many as 9 songs can be skipped.
DPSS (Direct Program Search System)
Indicating the songs to skip, and Fast Forwarding or Rewinding.
Skipping to a later song
Press the [¢] button.
Blank Skip
Fast forwarding automatically when an unrecorded portion
continues for at least 10 seconds.
Each time the button is pressed the number of songs skipped
increases.
Press the [B.S] button.
Each time the button is pressed the Blank Skip turns ON or OFF.
When it's ON, "B.S On" is displayed.
Skipping to a previous song
Press the [4] button.
Each time the button is pressed the number of songs skipped
increases.
Canceling DPSS
Press the [38] button.
Index Scan
• During the songs first 5 seconds there may be a times when the
previous song is recognized as the current song.
• As many as 9 songs can be skipped.
Playing the first part of each song on the tape you are listening
to and searching for the song you want to listen to.
1 Start Index Scan
Press the [SCN] button.
"IDX Scan" is displayed.
DPSS with the Remote
Designating the song to be skipped with the remote control
number buttons.
2 Release it when the song you want to listen to is played
Press the [SCN] button.
— 18 —
CD/MP3/External disc control features
Music Repeat
4
¢
SRC
0
Repeating the present song.
Press the [REP] button.
Each time the button is pressed the Music Repeat turns ON or
OFF.
When it's ON, "Repeat" is displayed.
DISC
DISP
NAME
COLOR
S.A
SRC
AUD
SCN
PWR OFF
B.NR
SCRL
MTL
FNC
B.S
M.RDM
RDM
REP
ATT
38
DISC–/DISC+
SCRL SCN RDM/#3 REP
#5
M.RDM
Random indicator
indicator
Track number
Track time
Disc number
MP3 indicator
Scan indicator
Repeat indicator
— 19 —
CD/MP3/External disc control features
Display
Disc player
Playing CD & MP3
"CD-CH"
"MD-CH"
CD changer
MD changer
When there is no disc inserted
Insert a disc.
Pause and play
• The models that can play MP3 is shown below.
DPX-MP4030
During MP3 is playing, the "MP3" indicator is ON.
Press the [38] button.
Each time the button is pressed it pauses and plays.
• When a disc is inserted, the
indicator is ON.
• Disc #10 is displayed as "0".
• The functions that can be used and the information that can be
displayed will differ depending on the external disc players being
connected.
When a disc is inserted
Press the [SRC] button.
Select the "CD" display.
Pause and play
Press the [38] button.
Each time the button is pressed it pauses and plays.
Fast Forwarding and Reversing
Eject the disc
Fast Forwarding
Press the [0] button.
Hold down on the [¢] button.
Release your finger to play the disc at that point.
3 in. (8cm) CD cannot be played. Using an adapter and inserting
them into this unit can cause damage.
Reversing
The MP3 media that this unit can play are CD-ROM, CD-R, and CD-
RW.
The medium formats must be ISO 9660 Level 1, Level 2, Joliet, or
Romeo. The methods and precautions to be followed for writing
MP3 data are covered in <Notes on playing MP3> (page 6).
Check that section before creating your MP3 media.
Hold down on the [4] button.
Release your finger to play the disc at that point.
Track/ File Search
Selecting the song you want to hear.
Searching for a song on the disc or in the MP3 folder.
Playing External Disc
Press the [4] or [¢] button.
Playing discs set in the optional accessory disc player connected
to this unit.
Press the [SRC] button.
Select the display for the disc player you want.
Display examples:
Disc Search (Function of disc changer)
Selecting the disc you want to hear.
Press the [DISC–] or [DISC+] button.
— 20 —
Folder Search (Function of MP3)
Selecting the folder recorded on the MP3 media.
Press the [DISC–] or [DISC+] button.
Track/ Disc/ Folder/ File Repeat
Replaying the song, disc in the Disc changer or MP3 folder
you're listening to.
Press the [REP] button.
Each time the button is pressed the Repeat Play switches as
When a disc is being played in an MP3-compatible Disc
Changer, pause the play.
shown below.
During CD/MD play
Repeat play
Display
Direct Track Search (Function of remote)
Doing Track Search by entering the track number.
Track Repeat
Disc Repeat (Function of disc changer)
OFF
"Repeat"
"D-Repeat"
—
1 Enter the track number
During MP3 play
Press the number buttons on the remote.
Repeat play
Display
2 Do Track Search
File Repeat
Folder Repeat
OFF
"File REP"
"Fold. REP"
—
Press the [4] or [¢] button.
Canceling Direct Track Search
Press the [38] button.
Track Scan
Direct Disc Search
Playing the first part of each song on the disc or MP3 folder you
are listening to and searching for the song you want to listen to.
(Function of disc changers with remote)
Doing Disc Search by entering the disc number.
1 Start Track Scan
Press the [SCN] button.
"Scan" is displayed.
1 Enter the disc number
Press the number buttons on the remote.
2 Do Disc Search
2 Release it when the song you want to listen to is played
Press the [DISC+] or [DISC–] button.
Press the [SCN] button.
Canceling Direct Disc Search
Press the [38] button.
Input "0" to select disc 10.
— 21 —
CD/MP3/External disc control features
Random Play
Play all the songs on the disc or MP3 folder in random order.
Press the [RDM] button.
Each time the button is pressed Random Play turns ON or OFF.
When it's ON, "Random" is displayed.
<Folder name display>
Displays the current folder name.
When the [¢] button is pressed, the next song select starts.
2 Select the folder level
Press the [FM] or [AM] button.
With the [FM] button you move 1 level down and with the [AM]
button 1 level up.
Magazine Random Play
Selecting a folder in the same level
Press the [4] or [¢] button.
With the [4] button you move to the previous folder, and with
the [¢] button to the next folder.
(Function of disc changer)
Play the songs on all the discs in the disc changer in random
order.
Press the [M.RDM] button.
Each time the button is pressed the Magazine Random Play turns
ON or OFF.
Returning to the top level
Press the [#3] button.
When it's ON, "M-Random" is displayed.
3 Decide the folder to play
Press the [38] button.
When the [¢] button is pressed, the next song select starts.
The Folder Select mode releases, and the MP3 in the folder
being displayed is played.
The methods for moving to other folders in the folder select mode
are different from those in the folder search mode.
See <Notes on playing MP3> (page 6) for details.
Function of the DPX-MP4030
Folder Select (Function of MP3)
Quickly selecting the folder you want to listen to.
Canceling the Folder Select mode
Press the [#5] button.
1 Enter Folder Select mode
Press the [#5] button.
"F.Select" is displayed.
During Select mode the folder information is displayed as shown
below.
Text/Title Scroll
Scrolling the displayed CD text, MP3 text, or MD title.
Press the [SCRL] button.
— 22 —
Function Set
Function Set
4
¢
FM/AM
Setting during operation beep sound etc. functions.
The Function Set basic operation method is explained here. The
reference for the Function items and their setting content is after
this operation explanation.
1 Enter Function Set mode
Press the [FNC] button for at least 1 second.
"Function" is displayed.
DISC
2 Select the Function Set item
Press the [FM] or [AM] button.
Example: When you want to set the beep sound select the
"BEEP" display.
DISP
NAME
COLOR
S.A
SRC
AUD
SCN
PWR OFF
B.NR
SCRL
MTL
M.RDM
FNC
B.S
RDM
REP
ATT
3 Set the Function Set item
Press the [4] or [¢] button.
Example: When "BEEP" is selected, each time the button is
pressed it switches "BEEP On" or "BEEP Off". Select 1
of them as the setting.
FNC
S.A
#1 – 4
You can continue by returning to step 2 and setting other items.
4 Exit Function Set mode
Press the [FNC] button.
Monaural indicator
When other items that are applicable to the basic operation method
above are displayed afterwards their setting content chart is
entered. (Normally the uppermost setting in the chart is the original
setting.)
Also, the explanation for items that aren't applicable are entered
step by step.
AUTO indicator
Function display
— 23 —
Function Set
<In ALL OFF Mode>
Switching preout
Switching the preout between the rear and non-fading. (In non-
fading it outputs without effect from the fader control.)
Illumination Color Mode
Setting the Illumination Color Mode of your display.
Display
Setting
Display
Setting
"Pout R"
Rear preout.
"COL Sync" The color of your display changes from one color to
another during volume adjustment and during
Attenuator being ON.
"Pout N-F"
Non-fading preout.
"COL Fix"
Fix the color set.
Opening Demonstration
Setting the Demonstration when Power is turned ON.
Contrast Adjustment
Display
Setting
Adjusting the display contrast.
"Open On"
Demonstration is carried out when Power is
turned ON.
Demonstration is not carried out when Power is
turned ON.
Display and Setting
"Open Off"
"CONT 1"
"CONT 7" (Original setting)
"CONT 11"
Equalizer mode
Setting the method of adjusting Equalizer types.
1 Select Equalizer mode
Press the [FM] or [AM] button.
Select the "EQ" display.
Touch Sensor Tone
Setting the operation check sound (beep sound) ON/OFF.
2 Select the method of adjusting Equalizer types
Press the [4] or [¢] button for at least 1 second.
Each time the button is pressed for at least 1 second, method of
adjusting Equalizer type switches as shown below:
Display
Setting
"BEEP On"
"BEEP Off"
Beep is heard.
Beep canceled.
— 24 —
Display
Setting
5 Do the step 3 and 4 step operation, and reenter the security
code.
"EQ EASY"
The effects of Equalizer type can be adjusted
among 3 levels.
The Security Code function activates.
"EQ PRO"
Equalizer types can be adjusted by Bass, Middle,
and Treble.
When a Code different from step 3 is entered, repeat from step 3.
Press the Reset button and when it's removed from the
battery power source
1 Turn the power ON.
Security Code
2 Do the step 3 and 4 operation, and enter the Security Code.
Because authorization by the Security Code is required when it's
removed from the vehicle, personalizing this unit is by using the
Security Code is a help in preventing theft.
"CODE OK!" is displayed.
The unit can be used.
When the Security Code function is activated, the code can't be
changed and the function can't be released.
Note, the Security Code can be set as the 4 digit number of your
choice.
<In Tuner mode>
Tuning Mode
Sets the tuning mode.
1 Select the Security Code mode
Press the [FM] or [AM] button.
Select the "Security" display.
Tuning mode
Display Operation
2 Enter the Security Code mode
Press the [S.A] button for at least 2 seconds.
"WRITE!" is displayed.
Auto seek
"Auto 1" Automatic search for a station.
Preset station seek "Auto 2" Search in order of the stations in
the Preset memory.
Manual
"Manual" Normal manual tuning control.
3 Enter the Security Code
Press the [#1] — [#4] button.
Example: If the Security Code is "3510".
Step Button
#Times pressed
Display
Monaural Reception <In FM reception>
Noise can be reduced when stereo broadcasts are received as
monaural.
1
2
3
4
[#1]
[#2]
[#3]
[#4]
4
6
2
1
"3"
"5"
"1"
"0"
Display
Setting
4 Confirm the Security Code
"MONO Off"
"MONO On"
The monaural reception is OFF.
The monaural reception is ON.
Press the [S.A] button.
When "WRITE!" is displayed, "RE-ENTER" is displayed.
— 25 —
Basic Operations of remote
Function Set
Accessory of the DPX-MP4030/ DPX-3030S
Auto Memory Entry
For the operation method refer to <Auto Memory Entry> (page
16).
<In CD/MP3/External disc control mode>
4/¢
Text Scroll
Setting the displayed text scroll.
FM/AM/DISC+/DISC–
Display
Setting
38
"SCL Auto"
"SCL Manu"
Repeats scroll.
Scrolls when the display changes.
The text scrolled is shown below.
• CD text
[#0] — [#9]
• Folder name/ File name/ Song title/ Artist name/ Album name
• MD title
DIRECT/OK
DNPP
ATT
VOL.
SRC
— 26 —
Loading and Replacing the battery
In Tuner source
Use one lithium battery (CR2025).
Insert the batteries with the + and – poles aligned properly,
following the illustration inside the case.
[FM]/ [AM] buttons
Select the band.
Each time the [FM] button is pressed it switches between the
FM1, FM2, and FM3 bands.
[4]/ [¢] buttons
Tune up or down band.
[#0] — [#9] buttons
Press buttons [#1] — [#6] to recall preset stations.
[DIRECT] button
Enters and cancels the <Direct Access Tuning> (page 15) mode.
2WARNING
Store unused batteries out of the reach of children. Contact a doctor
immediately if the battery is accidentally swallowed.
Do not set the remote on hot places such as above the dashboard.
In Cassette tape source
[4]/ [¢] buttons
Do <DPSS (Direct Program Search System)> (page 18).
[38] button
Basic operations
Plays the reverse side of the tape.
[VOL.] buttons
Adjusting the volume.
[FM] button
Fast forwards the tape.
When the [38] button is pressed it releases.
[SRC] button
Each time the button is pressed the source switches.
For the source switching order refer to <Selecting the Source>
(page 8).
[AM] button
Rewinds the tape.
When the [38] button is pressed it can be released.
[ATT] button
Turning the volume down quickly.
When it is pressed again it returns to the previous level.
[#0] — [#9] buttons
When in <DPSS with the Remote> (page 18) enter the number
of songs.
— 27 —
Basic Operations of remote
Accessory of the DPX-MP4030/ DPX-3030S
In Disc source
[4]/ [¢] buttons
Doing track/ file forward and backward.
[DISC+]/ [DISC–] buttons
Doing disc/ folder forward and backward.
[38] button
Each time the button is pressed the song pauses and plays.
[#0] — [#9] buttons
When in <Direct Track Search> (page 21) and <Direct Disc
Search> (page 21), enter the track/disc number.
— 28 —
Accessories
External view
External view
......... Number of items
2WARNING
......... Number of items
If you connect the ignition wire (red) and the battery wire (yellow)
to the car chassis (ground), you may cause a short circuit, that in
turn may start a fire. Always connect those wires to the power
source running through the fuse box.
(M5×6mm)
1
2
3
4
.........6
.........1
2CAUTION
• If your car's ignition does not have an ACC position, connect the
ignition wires to a power source that can be turned on and off
with the ignition key. If you connect the ignition wire to a power
source with a constant voltage supply, as with battery wires, the
battery may die.
• If the fuse blows, first make sure the wires aren’t touching to
cause a short circuit, then replace the old fuse with one with the
same rating.
(M5×7mm)
.........1
.........6
The use of any accessories except for those provided might result in
damage to the unit. Make sure only to use the accessories shipped with
the unit, as shown above.
• Insulate unconnected wires with vinyl tape or other similar
material. To prevent a short circuit, do not remove the caps on
the ends of the unconnected wires or the terminals.
• Connect the speaker wires correctly to the terminals to which
they correspond. The unit may be damaged or fail to work if you
share the - wires or ground them to any metal part in the car.
• When only two speakers are being connected to the system,
connect the connectors either to both the front output terminals
or to both the rear output terminals (do not mix front and rear).
For example, if you connect the + connector of the left speaker
to a front output terminal, do not connect the - connector to a
rear output terminal
Installation Procedure
1. To prevent a short circuit, remove the key from the ignition and
disconnect the - battery.
2. Make the proper input and output wire connections for each unit.
3. Connect the speaker wires of the wiring harness.
• After the unit is installed, check whether the brake lamps,
blinkers, wipers, etc. on the car are working properly.
• Mount the unit so that the mounting angle is 30° or less.
4. Connect the wiring harness wires in the following order: ground,
battery, ignition.
5. Connect the wiring harness connector to the unit.
6. Install the unit in your car.
7. Reconnect the - battery.
8. Press the reset button.
— 29 —
Connecting Wires to Terminals
Front left output (White)
Front right output (Red)
Fuse (10A)
Rear left output (White)/
Non-fading left output (White)
FM/AM antenna input
Rear right output (Red)/
Non-fading right output (Red)
KENWOOD disc changer control input
NOTE
Dimmer control wire
(Orange/White)
Wiring harness
(Accessory2)
To connect the Disc changer,
consult your Disc changer manual.
To car light control switch
ILLUMI
White/Black–
To front left
speaker
Power control wire
(Blue/White)
P.CONT
FRONT•L
+
When using the optional power amplifier,
connect to its power control terminal.
White
Gray/Black–
Depending on what antenna you are using,
connect either to the control terminal of the
motor antenna, or to the power terminal for
the booster amplifier of the film-type antenna.
To front right
speaker
Motor antenna control wire
(Blue)
FRONT•R
Gray+
ANT
CONT
Green/Black–
Ignition key
To rear left
speaker
REAR•L
+
switch
Ignition wire (Red)
ACC
Green
ACC
Purple/Black–
Battery wire (Yellow)
To rear right
speaker
Car fuse box
(Main fuse)
REAR•R
+
BATT
Purple
Car fuse box
Ground wire (Black) - (To car chassis)
Battery
–
+
— 30 —
Installation
2CAUTION
When performing a check of the CD operation prior to installation,
place this unit in a horizontal position and perform a loading/eject
of the CD.
■
Installation
Install onto the car bracket using the supplied screws (M5 × 6
mm, M5 × 7 mm). The holes of the car bracket to use will differ
depending on the car model.
Screw (M4X8)
(commercially
available)
When a ground wire is
included in the wiring kit
(which is sold separately),
fasten the ground wire
with the binding screw
located on the rear panel
of this unit.
Accessory1
(M5 × 6 mm)
or Accessory4
(M5 × 7 mm)
Accessory3
(Only for NISSAN car)
— 31 —
Troubleshooting Guide
✔
The cassette tape is bad.23
☞ Try playing another cassette tape. If works fine, the first tape was
What might seem to be a malfunction in your unit may
just be the result of slight misoperation or miswiring.
Before calling service, first check the following table
for possible problems.
bad.
? The sound quality is poor or distorted.25
✔
✔
✔
One of the speaker wires is being pinched by a screw in the car.
☞ Check the speaker wiring.
General
The tape head is dirty.26
☞ Clean the tape head.
? The power does not turn ON.01
✔
The fuse has blown.
The speakers are not wired correctly.27
☞ Reconnect the speaker wires so that each output terminal is
connected to a different speaker.
☞ After checking for short circuits in the wires, replace the fuse with
one with the same rating.
✔
No ACC position on vehicle ignition.02
☞ Connect the same wire to the ignition as the battery wire.
? Non-fading setting can’t be done.28
✔
The <Switching preout> (page 24) is set on Rear preout.
? Nothing happens when the buttons are pressed.04
☞ Set it on Non-fading preout.
✔
The computer chip in the unit is not functioning normally.
☞ Press the reset button on the unit (page 4).
? The text is not scrolled.31
✔
This is because eight or less characters are displayed.
☞ If all the characters are displayable on the display part, the text is
scrolled once when the display switches, and after that, the text
is not scrolled.
? There’s a source you can’t switch.05
✔
✔
✔
There’s no tape inserted.
☞ Set the media you want to listen to. If there’s no media in this
unit, you can't switch to each source.
? The Security Code item isn’t displayed in the Function System.32
There’s no CD inserted.
☞ Set the media you want to listen to. If there’s no media in this
unit, you can't switch to each source.
✔
The Security Code function is already activated.
☞ When the Security Code function is activated it isn’t displayed in
the Function items.
The Disc changer isn’t connected.08
☞ Connect the Disc changer. If the Disc changer isn’t connected to
it's input terminal, You can't switch to an external disc source.
? The Touch Sensor Tone doesn’t sound.34
✔
The preout jack is being used.
☞ The Touch Sensor Tone can’t be output from the preout jack.
? The memory is erased when the ignition is turned OFF.10
✔
The battery wire has not been connected to the proper terminal.
☞ Connect the wire correctly, referring to the section on
<Connecting Wires to Terminals>.
? Even though the vehicle light switch is turned ON, the unit’s display
won’t dim.36
✔
The dimmer wire isn’t connected.
☞ Connect the dimmer wire correctly.
✔
The ignition and battery wire are incorrectly connected.11
☞ Connect the wire correctly, referring to the section on
<Connecting Wires to Terminals>.
? The display color changes subtly. 38-2
✔
This is because the temperature is different than the temperature
when the setting was done.
? No sound can be heard, or the volume is low.
☞ The display color condition changes subtly according.to the
ambient temperature.
✔
The fader or balance settings are set all the way to one side.21
☞ Center the fader and balance settings.
✔
The input/output wires or wiring harness are connected incorrectly.22
☞ Reconnect the input/output wires or the wiring harness correctly.
See the section on <Connecting Wires to Terminals>.
— 32 —
Tuner source
Disc source
? Radio reception is poor.39
? "AUX" is displayed without achieving External disc control mode.50
✔
✔
The car antenna is not extended.
✔
✔
O-N switch is set to "O" side.
☞ Pull the antenna out all the way.
☞ Set the switch to "N" side.
The antenna control wire is not connected.40
☞ Connect the wire correctly, referring to the section on
<Connecting Wires to Terminals>.
Unsupported disc changer is connected.51
☞ Connect the supported disc changer. (page 3)
? The specified disc does not play, but another one plays instead.52
? The desired frequency can’t be entered with the Direct Access
✔
✔
✔
The specified CD is quite dirty.
☞ Clean the CD.
Tuning.41
✔
A station that can’t be received is being entered.
The CD is upside-down.53
☞ Load the CD with the labeled side up.
☞ Enter a station that can be received.
✔
You’re trying to enter a frequency with a 0.01 MHz unit.42
The disc is loaded in a different slot from that specified.54
☞ Eject the disc magazine and check the number for the specified
disc.
☞ What can be designated in the FM band is to 0.1 MHz.
Cassette tape source
✔
The disc is severely scratched.55
☞ Try another disc instead.
? Can’t remove tape.44
✔
The cause is that more than 10 minutes has elapsed since the vehicle
ACC switch was turned OFF.
? The specified track will not play.58
✔
Random play or magazine random play has been selected.
☞ The tape can only be removed within 10 minutes of the ACC
switch being turned OFF. If more than 10 minutes has elapsed,
turn the ACC switch ON again and press the Eject button.
☞ Turn off random play or magazine random play.
? Track repeat, disc repeat, track scan, random play, and magazine
random play start by themselves.59
? The DPSS, Tape Advance and Music Repeat don’t operate
✔
The setting is not canceled.
correctly.45
☞ The settings for these functions remain on until the setting to off
or the disc ejected, even if the power is turned off or the source
changed.
✔
The space between the songs on the tape can’t be recognized
because it’s too short.
☞ Have at least 4 seconds between songs.
? Cannot play CD-R or CD-RW.60
✔
The space between songs can’t be recognized because there’s too
much noise between songs.46
☞ Reduce the noise between songs.
✔
Finalization processing is not being conducted for CD-R/CD-RW.
☞ Conduct finalization processing with CD recorder.
✔
A non-compatible CD changer is being used to play the CD-R/CD-
RW.61
☞ Use a CD changer compatible with CD-R/CD-RW to play.
? The blank skip doesn’t work.47
✔
Because noise is too loud, the non-recorded part can’t be recognized.
☞ Reduce the noise between songs.
? A CD ejects as soon as it is loaded.62
? Blank Skip functions at places that are recorded.48
✔
The CD is upside-down.
✔
Because the recording level is low, it’s recognized as not recorded.
☞ Load the CD with the labeled side up.
☞ Turn Blank Skip OFF.
✔
The CD is quite dirty.63
☞ Clean the CD, referring to the section on <CD cleaning> (page 5).
— 33 —
Troubleshooting Guide
MP3 source
? Can’t remove disc.64
✔
The cause is that more than 10 minutes has elapsed since the vehicle
ACC switch was turned OFF.
? Cannot play an MP3.67
✔
Not conforming to ISO 9660 Level 1/2, Joliet, and Romeo.
☞ Use a medium conforming to ISO 9660 Level 1/2, Joliet, and
Romeo.
☞ The disc can only be removed within 10 minutes of the ACC
switch being turned OFF. If more than 10 minutes has elapsed,
turn the ACC switch ON again and press the Eject button.
✔
✔
The MP3 has no or invalid file name extension.68
☞ Add the ".MP3" extension to the MP3 file name.
? The disc won’t insert.65
✔
There’s already another disc inserted.
The media is scratched or dirty.69
☞ Clean the media, referring to the section on <CD cleaning> (page
☞ Press the [0] button and remove the disc.
5).
? Direct Track Search and Direct Disc Search can’t be done.66-1
✔
Another function is ON.
? Noise or no sound generated when an MP3 is played.70
☞ Turn Random Play or other functions OFF.
✔
The file has the MP3 file name extension while it is not an MP3.
☞ Do not use the ".MP3" extension in non-MP3.
? Track Search can't be done.66-2
✔
For the discs first or last song.
? Takes time before the unit starts playing MP3.71
☞ For each disc, Track Search can't be done in the backward
direction for the first song or in the forward direction for the last
song.
✔
The medium contains many folders, files, and hierarchical levels.
☞ The unit checks all files on the loaded medium first. If the medium
has many files recorded, it may take a long time for the unit
before it starts playing MP3.
? Fails to play MP3 in the intended order.72
✔
The MP3 files were not written by the CD writer in the order in which
you wanted them to be played.
☞ Depending on the CD writer, you may be able to set the order in
which MP3 files are to be played by writing them onto a medium
with their file names beginning with play sequence numbers such
as "01" to "99".
? The sound skips when an MP3 is being played.73-1
✔
The media is scratched or dirty.
☞ Clean the media, referring to the section on <CD cleaning> (page
5).
✔
The recording condition is bad.73-2
☞ Record the media again or use another media.
? Can't display the ID3 tag information correctly.75
✔
Record is not made in conformity with the ID 3 tag version1.x.
☞ Record in conformity with the ID 3 tag version1.x.
— 34 —
The messages shown below display your systems
condition.
? The songs in the selected folder aren’t played in Folder Select
mode.77
✔
There are no MP3 in the selected folder.
EJECT:
No disc magazine has been loaded in the changer.
The disc magazine is not completely loaded.E01
➪ Load the disc magazine properly.
No CD in the unit.
☞ Make sure there’s recorded content in the MP3 media.
? The MP3 File/Folder search takes time.78
✔
Many files are recorded on the media.
☞ When the media directory is complex, the file/folder search can
take time.
➪ Insert the CD.
No Disc:
Error 04:
No disc has been loaded in the disc magazine.E02
➪ Load a disc into the disc magazine.
? The MP3 related text isn’t displayed correctly.79
✔
A character is entered that this unit can't display.
☞ For the characters that can be used for MP3 text entry, refer to
<Notes on playing MP3> (page 6).
No disc has been loaded in the disc magazine.E04
➪ Load a disc into the disc magazine.
The CD is quite dirty. The CD is upside-down. The CD
is scratched a lot.
? The MP3 file time isn’t displayed correctly.80
✔
---
☞ There are times when it isn’t displayed correctly according to the
➪ Clean the CD and load it correctly.
MP3 recording conditions.
Error 05:
The CD is upside-down.E05
➪ Load the CD correctly.
? The songs in the selected folder aren’t played in Folder Select
mode.102
✔
There are no MP3 in the selected folder.
Blank:
Nothing has been recorded on the MD.E10
☞ Make sure there’s recorded content in the MP3 media.
No Track:
No tracks are recorded on the MD, although it has a
title.E11
If the following situations, consult your nearest service
center:
• Even though the disc changer is connected, the Disc Changer source is
not ON, with "AUX" showing in the display during the Changer Mode.
• Even though no device (KCA-S210A, CA-C1AX, KDC-CPS87, KDC-CX87,
KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is connected, the
Auxiliary input is entered when switching modes.
No Music:
Media was played that doesn’t have data recorded
that the unit can play. E15
➪ Use media that has data recorded that the unit can
play.
Error 30:
Error 77:
The faceplate of the slave unit being connected to
this unit has been removed.E30
➪ Replace it.
The unit is malfunctioning for some reason.E77
➪ Press the reset button on the unit. If the "Error 77"
code does not disappear, consult your nearest
service center.
— 35 —
Troubleshooting Guide
Error 99:
Something is wrong with the disc magazine. Or the
unit is malfunctioning for some reason.E99
➪ Check the disc magazine. And then press the reset
button on the unit. If the "Error 99" code does not
disappear, consult your nearest service center.
(Blink):
(Blink):
The CD player section is not operating properly.E59
➪ Reinsert the CD. If the CD cannot be ejected or the
display continues to flash even when the CD has
been properly reinserted, please switch off the
power and consult your nearest service center.
Hold:
The protective circuit in the unit activates when the
temperature inside the automatic disc changer
exceeds 60°C (140°F), stopping all operation.E0d
➪ Cool down the unit by opening the windows or
turning on the air conditioner. As the temperature
falls below 60°C (140°F), the disc will start playing
again.
The tape player section is not operating properly.E60
➪ Reinsert the Tape. If the tape cannot be ejected or
the display continues to flash even when the tape
has been properly reinserted, please switch off the
power and consult your nearest service center.
N/A File:
A MP3 is played with a format that this unit can't
support.E63
No Name:
• Attempted to display DNPS during the CD play
having no disc names preset.E51
• Attempted to display SNPS during the receiving
session of the station having no station name
preset.E50
No Title:
No Text:
Attempted to display the disc title or track title while
the MD having no MD title is being played.E53
• Attempted to display the disc text or track text
while the CD having no CD text is being played.E54
• Attempted to display the ID3 tag while the MP3
having no ID3 tag is being played.E52
Load:
Discs are being exchanged in the Disc changer.E57-1
F-Check:
The unit is reading the data on the disc.E57-2
— 36 —
Specifications
Specifications subject to change without notice.
FM tuner section
CD player section
Frequency range (50 kHz space) ..............87.5 MHz – 108.0 MHz
Frequency range (200 kHz space) ............87.9 MHz – 107.9 MHz
Usable sensitivity (S/N = 30dB)....................9.3dBf (0.8 µV/75 Ω)
Quieting Sensitivity (S/N = 50dB) ..............15.2dBf (1.6 µV/75 Ω)
Frequency response ( 3.0 dB)..............................30 Hz – 15 kHz
Signal to Noise ratio (MONO)..............................................70 dB
Selectivity ( 400 kHz) ......................................................≥ 80 dB
Stereo separation (1 kHz) ....................................................40 dB
Laser diode....................................................GaAlAs (λ=780 nm)
Digital filter (D/A)......................................8 Times Over Sampling
D/A Converter ......................................................................1 Bit
Spindle speed
DPX-MP4030 ........................1000 – 400 rpm (CLV 2times)
DPX-3030S/ 3030................................500 – 200 rpm (CLV)
Wow & Flutter........................................Below Measurable Limit
Frequency response ( 1 dB) ................................10 Hz – 20 kHz
Total harmonic distortion (1 kHz) ......................................0.01 %
Signal to Noise ratio ................................................93 dB (1 kHz)
Dynamic range ....................................................................93 dB
Channel separation..............................................................85 dB
MP3 Decode (DPX-MP4030)
AM tuner section
Frequency range (9 kHz space) ....................531 kHz – 1611 kHz
Frequency range (10 kHz space) ..................530 kHz – 1700 kHz
Usable sensitivity (S/N = 20dB) ..........................28 dBµV (25 µV)
................Compliant with MPEG-1.0/2.0/2.5 Audio Layer-3
Cassette player section
Tape speed ..............................................................4.76 cm/sec.
Wow & Flutter (WRMS) ....................................................0.08 %
Frequency response (70 µs)....................25 Hz – 22 kHz ( 3 dB)
Separation (1 kHz) ..............................................................40 dB
Signal to Noise ratio
Audio section
Maximum output power..................................................45 W × 4
Full bandwidth power (at less than 1% THD) ................22 W × 4
Preout level / Load ................................................1500mV/10kΩ
Preout impedance............................................................≤ 600 Ω
(Dolby NR OFF)..........................................................60 dB
(Dolby B NR ON)........................................................68 dB
General
Operating voltage ............................14.4 V (11 – 16 V allowable)
Current consumption ................................10.0 A at Rated power
Installation size (W × H × D) ........................178 × 100 × 155 mm
Weight ................................................................................2.3 kg
— 37 —
|