COMPACT VHS CAMCORDER
ENGLISH
GR-AX470
GR-AX270
The Logical Choice
PAL
Compact VHS
The only compact video
cassettes that can be
used with your VHS VCR*
PAL
MAJOR FEATURES
Ⅲ Program Manager (੬ pg. 14 – 23)
Ⅲ Programme AE with Special Effects
(੬ pgs. 14, 15)
Ⅲ Integrated Auto Light
(GR-AX470 only) (੬ pg. 13)
Ⅲ Variable-Speed Hyper Zoom
(੬ pg. 11)
Ⅲ EasyEdit with Random Assemble
Editing (੬ pg. 31 – 33)
(GR-AX470 shown.)
INSTRUCTIONS
LYT0002-073A
EN
CONTENTS
GETTING STARTED
MAJOR FEATURES
EN
3
4
ⅢProgram Manager (੬ pg. 14 – 23)
Power .............................................. 4
Clock (Lithium) Battery Insertion/Removal ... 6
Viewfinder Adjustment .......................... 6
Date/Time Setting ................................ 7
Tape Length Setting............................... 8
Recording Mode Setting.......................... 8
Loading/Unloading A Cassette.................. 8
Grip Adjustment................................... 9
Shoulder Strap Attachment ...................... 9
Tripod Mounting ................................... 9
ⅢProgramme AE with Special Effects
(੬ pgs. 14, 15)
• Auto Mode Lock
• Auto Mode Release
• Electronic Fog Filter • ND Effect
• Sepia • Twilight • Sports
• 1/1000 sec. High Speed Shutter
• 1/2000 sec. High Speed Shutter
ⅢIntegrated Auto Light (GR-AX470
only) (੬ pg. 13)
RECORDING
10
ⅢVariable-Speed Hyper Zoom
(੬ pg. 11)
Basic Recording ................................. 10
Basic Features ................................... 11
Advanced Features ............................. 14
ⅢEasyEdit with Random Assemble
Editing (੬ pg. 31 – 33)
PLAYBACK
26
Using The Cassette Adapter ................... 26
Basic Connections ............................... 27
Basic Playback .................................. 28
Features.......................................... 29
PROVIDED ACCESSORIES
EDITING
30
Tape Dubbing .................................... 30
Random Assemble Editing [R.A.Edit] ......... 31
•AC Power Adapter/
Charger AA-V11EG
•Battery Pack
BN-V12U
USING REMOTE CONTROL UNIT 34
Insert Editing .................................... 36
Audio Dubbing ................................... 37
TROUBLESHOOTING
INDEX
Controls .......................................... 40
Connectors ....................................... 41
Indicators ........................................ 41
Other Parts ...................................... 41
Viewfinder....................................... 42
38
40
•Shoulder Strap
•Cable Adapter
•Cassette Adapter C-P7U
•Remote Control
Unit RM-V704U
or RM-V700U
CAUTIONS
43
45
•Lithium Battery
CR2025 x 2
SPECIFICATIONS
•Editing cable
•DC cord
•AUDIO/VIDEO
(A/V) cable
GETTING STARTED
4
EN
Power
CHG. (charge) indicator
Marks
This camcorder’s 3-way power supply system lets you
choose the most appropriate source of power.
POWER
indicator
To AC outlet
NOTES:
● No function is available without power supply.
● Use only specified power supply.
● Do not use provided power supply units with other
equipment.
END
indicator
CHARGING THE BATTERY PACK
SUPPLY POWER
Connect the charger’s AC power cord to a wall
1
2
outlet. The power indicator lights.
REFRESH switch
Charge marker
REFRESH indicator
ATTACH BATTERY PACK
Align the marks and slide the battery pack in the
direction of the arrow until it locks in place.
The CHG. indicator lights.
** CHARGE MARKER
A charge marker is provided on
the battery pack to help you
remember whether it has been
charged or not. Two colors are
provided (red and black)—you
choose which one means
charged and which means
discharged.
DETACH BATTERY PACK
When charging is completed, the END indicator
lights. Slide the battery pack opposite the direction
of the arrow.
3
BATT. PACK
CHARGE
DISCHARGE
BN-V12U
BN-V22U
BN-V25U
approx. 1 hr. 10 min.
approx. 3 hrs. 30 min.
approx. 2 hrs. 10 min. approx. 7 hrs.
approx. 2 hrs. 40 min. approx. 10 hrs.
USING THE BATTERY PACK
Hook on.
ATTACH BATTERY PACK
Hook its top end to the camcorder and push the
1
2
battery pack in until it locks in place.
DETACH BATTERY PACK
Slide BATT. RELEASE and pull out the battery pack.
Push in.
BATT. PACK
APPROXIMATE RECORDING TIME
1 hr. 10 min. (40 min.)
BN-V12U
BN-V22U
BN-V25U
BATT. RELEASE
2 hrs. 25 min. (1hr. 30 min.)
3 hrs. 10 min. (1hr. 55 min.)
( ): when the video light is on (GR-AX470 only).
**REFRESH
The AC power adapter features a REFRESH function that
allows you to fully discharge the battery pack before
recharging.
ATTENTION:
Before detaching the power source, make
sure that the camcorder’s power is turned
off. Failure to do so can result in a
camcorder malfunction.
To discharge the battery . . .
..... attach the battery pack to the adapter as shown in the
illustration to the left. Then push REFRESH. The
REFRESH indicator lights when discharging starts,
and goes out when discharging is complete.
EN
5
NOTES:
● The recording time per charge is affected by such factors as the time spent in Record/Standby mode and
the frequency of zooming. It is safer to have spare battery packs.
● Charging times noted on page 4 are for fully discharged battey pack, and discharging times are for fully
charged battery pack.
●
Charging and discharging times vary according to the ambient temperature and the status of the battery pack.
● Remember to set the charge marker after charging a battery pack or after detaching a discharged one from
your camcorder.
● Perform the REFRESH function after no less than 5 chargings.
● High temperatures can damage the battery pack, so use only where good ventilation is available. Don’t
allow it to discharge in container, such as a bag.
● If you stop recharging or discharging part way through, make sure to remove the battery pack before
unplugging the adapter’s AC cord.
● Remove the battery pack from the adapter immediately after discharging.
● To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.
● Make sure you unplug the DC cord before charging or discharging the battery pack.
●
A blinking CHG. indicator means that the battery pack has become hot. Wait until it cools down to continue.
● The CHG. indicator may not light properly with a brand new battery pack, or with one that’s been stored
for an extended period. In this case, remove and reattach the battery pack and recharge it. The CHG.
indicator should light during recharging. If not, contact your nearest JVC dealer.
To AC outlet
DC OUT
terminal
To DC in jack
AC Power
Adapter/Charger
AA-V11EG
DC cord
To car’s cigarette
lighter socket
Car Battery Charger/Adapter
BH-V3E (optional)
USING A CAR BATTERY
USING AC POWER
Use the optional Car Battery Charger/Adapter
(connect as shown in the above illustration).
Use the AC Power Adapter (connect as shown in
the above illustration).
NOTES:
NOTE:
● When using the car battery, leave the engine
idling.
The supplied AC Power Adapter/Charger features
automatic voltage selection in the AC range from
110 V to 240 V.
● The optional Car Battery Charger (BH-V3E) can
also be used to charge the battery pack.
● When using the optional Car Battery Charger or
Car Battery Cord (AP-V7E), refer to the respective
instruction booklet.
GETTING STARTED (cont.)
6
EN
Clock (Lithium) Battery Insertion/Removal
This battery is necessary for clock operation and to
perform date/time settings.
A
SWITCH OFF POWER
Switch off the unit’s power and remove the power
1
2
3
supply unit.
OPEN COVER
Open the clock battery compartment cover while
pressing the release tab.
REMOVE BATTERY (when replacing)
Insert a pointed, non-metallic object between the
A
battery and the compartment ( ) and pull the
battery out.
INSERT BATTERY
Ensuring the plus (+) side is up, insert a CR2025
lithium battery and push it in.
4
5
CLOSE COVER
Close the compartment cover until it clicks in place.
NOTE:
See “SAFETY PRECAUTIONS” (੬ pg. 2) for information
on safe handling of lithium batteries.
Viewfinder Adjustment
POSITION VIEWFINDER
3
Adjust the viewfinder manually for best viewability
1
2
3
(see illustration at left).
SELECT MODE
1
Set the power switch to CAMERA.
2
ADJUST DIOPTER
Turn the diopter adjustment control until the
indications in the viewfinder are clearly focused.
Set POWER to “CAMERA”.
EN
7
Date/Time Setting
SELECT MODE
MENU
First set the power switch to “CAMERA”. Turn the
PROGRAM AE select dial to any position except
AUTO LOCK.
1
ACCESS MENU SCREEN
Press MENU.
2
3
SELECT FUNCTION
Press – to move the highlight bar down to “DATE/
TIME”, then press NEAR. The Set Date And Time
screen appears.
+
–
PROGRAM AE
select dial
SET DATE/TIME
Press FAR or NEAR until the item you want to set
4
begins blinking, then press + or – to until the correct
setting appears.
NEAR
•If you decide you want to return the date and time
to the previous settings, press FAR or NEAR to
move the highlight bar to “CANCEL”, then press
MENU.
FAR
•If you’re satisfied with the settings, go on to step 5.
GAIN UP
TELE MACRO
S.LX
OFF
Menu Screen
START CLOCK OPERATION
INTERVAL TIMER OFF
REC TIME
OFF
07
Once you’ve set the day, month, year and time,
press FAR or NEAR until “SET” begins to blink, then
press MENU. The Menu screen reappears.
JLIP ID NO.
5
6
SET CHARACTER
DATE/TIME
CLOSE MENU
END :MENU KEY
Press MENU.
Set Time and
Date Screen
NOTES:
1.1.00
SET
10:45
● To display the date and time in the viewfinder and on a
connected TV, see “Date/Time Insert” (੬ pg. 20).
● If, in step 4, you input an invalid date (30. 2, 31. 1,
etc.) and perform step 5, “INPUT ERROR” appears
blinking at the bottom of the screen. Press +, –, FAR or
NEAR to input the correct number.
CANCEL
Date
Day/Month/Year
Time
24-hour indication
GETTING STARTED (cont.)
8
EN
Tape Length Setting
SP-LP recording mode button
Set the tape length according to the length of the tape
used.
T30•45•60 tape
length select
button
SET TAPE LENGTH
Press T30•45•60 until the required indication
1
appears in the veiwfinder. T30 = 30 minutes of
recording time, T45 = 45 minutes, and T60 = 60
minutes (in SP).
NOTE:
The tape remaining time (੬ pg. 10) displayed in the
viewfinder is correct only if the correct tape length has
been selected.
Recording Mode Setting
Set depending on your preference.
SET RECORDING MODE
Set POWER to “CAMERA”.
Press SP-LP button. “SP” (Standard Play) provides
1
higher picture and sound quality and is better for
dubbing, while “LP” (Long Play) is more economi-
cal, recording at 1/2 the speed of SP.
Tape length indicator
T30
T30
T45
T60
NOTE:
If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.
Recording mode indicator
Loading/Unloading A Cassette
SP
SP
LP
OPEN CASSETTE HOLDER
Slide EJECT until the holder opens. Do not use force
1
2
3
to open.
INSERT/REMOVE CASSETTE
Make sure the label is facing outward.
CLOSE CASSETTE HOLDER
Press PUSH and make sure the holder is closed and
locked.
NOTES:
● A cassette holder can’t be opened unless a power
supply is attached.
● Make sure that the tape is not slack when loading the
cassette. If there is any slack, turn the gear on the
cassette in the direction of the arrow to take up the
slack.
● Make sure the Erase Protection tab is in the position
that allows recording. If not, slide the tab. Some
cassettes have removable tabs. If the tab has been
removed, cover the hole with adhesive tape.
● The cassette holder can’t be opened while the
camcorder is in the record mode.
Turn to take
up slack.
Erase Protection
Gear
EN
9
Grip Adjustment
EXPAND LOOP
Separate the Velcro strip.
1
INSERT HAND
Pass your right hand through the loop and grasp the
grip.
2
3
ADJUST STRAP LENGTH
Adjust so your thumb and fingers can easily operate
the Recording Start/Stop button and Power Zoom
lever. Refasten the Velcro strip.
Recording Start/Stop button
Shoulder Strap Attachment
ATTACH STRAP
Following the illustration at left, thread the strap
1
1
through the top of the eyelet 1, then fold it back
and thread it through the keeper 2, and then
through the buckle 3. Repeat the procedure to
attach the other end of the strap to the other eyelet,
making sure the strap isn’t twisted.
3
2
2
1
ADJUST LENGTH
Adjust as shown in the illustration at left 1, then
slide both keepers snug against the eyelets to
prevent slipping 2.
2
Tripod Mounting
ALIGN AND TIGHTEN
Align the screw and camera direction stud on the
tripod with the camera’s mounting socket and stud
hole. Then tighten the screw.
1
RECORDING Basic Recording
10
EN
Tape remaining time indicator
NOTE:
You should already have performed the procedures listed
below. If not, do so before continuing.
● Power (੬ pg. 4)
25MIN
*---MIN
(Now calculating)
● Tape Length setting (੬ pg. 8)
● Recording mode setting (੬ pg. 8)
● Grip Adjustment (੬ pg. 9)
120MIN
119MIN
LOAD A CASSETTE
Power indicator
3MIN
Slide EJECT to open the cassette holder, then insert
1
2
the cassette with the label facing out. Press PUSH to
ensure the holder is closed and locked.
2MIN (Blinking)
1MIN (Blinking)
0MIN (Blinking)
ENTER RECORD–STANDBY MODE
Slide the LENS COVER open/close switch to open
the lens cover, then set the power switch to
“CAMERA”.
•The power indicator lights and the camcorder
enters the Record–Standby Mode.
•The scene you’re aimed at appears on the
viewfinder screen, with the word “PAUSE”
superimposed upon it.
LENS COVER
switch
START SHOOTING
Press the RECORDING START/STOP button.
3
4
POWER
•The tally lamp lights while recording is in progress,
and “REC ” appears in the viewfinder.
Start/Stop button
STOP RECORDING
Press the RECORDING START/STOP button again to
stop recording.
Tally lamp
•The camcorder re-enters the Record-Standby
mode.
NOTES:
● A cassette holder can’t be opened unless a power supply is attached.
● There may be a delay after you slide EJECT until the holder opens. Do not use force.
● The tape’s remaining time is displayed in the viewfinder as shown.
● The indicated remaining time is approximate.
● The time required to calculate the remaining tape length, and the accuracy of the calculation, may vary
according to the type of tape used.
● The tape remaining time displayed in the viewfinder is correct only if the correct tape length has been
selected (੬ pg. 8).
● “TAPE END” appears when the tape reaches its end, and the power goes off automatically if left in this
condition for 5 minutes. “TAPE END” also appears when a cassette whose tape is already at its end is
loaded.
● If the Record–Standby mode continues for 5 minutes without performing Zoom or any other operations,
the camcorder’s power shuts off automatically. Set the Power switch to “POWER OFF”, and then back to
“CAMERA” to turn the camcorder on again.
● If the Recording Start/Stop button is pressed after the Record-Standby mode has continued for over 5
minutes, recording may not start immediately.
● If you’re recording on a cassette from the middle, use the RETAKE function (੬ pg. 12) to find the end of
the last recording so you don’t erase any of it.
● The LENS COVER warning blinks for about 10 seconds when the camcorder is turned on, when the cover
is closed.
RECORDING Basic Features
EN
11
Power zoom switch
FEATURE:
PURPOSE:
Zooming
Varies the focal length of the lens
and produces the zoom in/out effect.
OPERATION:
Zoom In
1) Pull the power zoom switch down
toward “T”.
Zoom Out
1) Push the switch up toward “W”.
● The further the power zoom switch
is pushed, the faster the zoom
speed becomes.
NOTES:
● Focusing may become unstable
during zooming. In this case, set
the zoom while in Record–
Standby, set manual focus or Focus
Lock (੬ pgs. 16, 17), then zoom
in or out in Record mode.
Zoom-in
Zoom-out
Zoom indicator
RECORDING Basic Features (cont.)
12
EN
FEATURE:
PURPOSE:
Quick Review
To check the end of the last record-
ing.
OPERATION:
1) Press “ ” and release quickly
during the Record–Standby mode.
•Tape is rewound for about 2
seconds and played back
automatically, then pauses in
Record–Standby mode for the
next shot.
RETAKE (R/F)
NOTE:
Distortion may occur at start of
playback. This is normal.
FEATURE:
Retake
PURPOSE:
OPERATION:
To re-record certain segments.
1) Make sure the camcorder is in the
Record–Standby mode.
2) Press either RETAKE button to
reach the start point for new
recording.
Pressing “F” fast-forwards the tape
and pressing “R” reverses it.
3) Press Recording Start/Stop to start
recording.
NOTE:
Noise may appear during Retake.
This is normal.
EN
13
Video Light (GR-AX470 only)
When natural lighting is too dim, you can brighten the
scene by using the built-in video light.
SET VIDEO LIGHT
Set the LIGHT ON/AUTO/OFF as required.
1 ON
: Always keeps the light on as long as the
camcorder is turned on.
AUTO : Automatically turns on the light when the
camcorder senses insufficient lighting on
the subject.
OFF : Turns off the light.
LIGHT ON/AUTO/OFF
•The video light can be used with the camcorder’s
power on.
•It is recommended to set the white balance
(੬ pg. 21) to indoor mode ( ) when you use the
video light.
•When not using the video light, turn it off to save
battery power.
NOTES:
● Even if the battery indicator (
) does not blink in the
viewfinder, if the battery pack’s charge is low, the
camcorder may turn off automatically when you turn
on the video light, or when you start recording with the
video light turned on.
● When the LIGHT ON/AUTO/OFF switch is set to
“AUTO”:
•Depending on the lighting conditions, the video light
may keep turning on and off. In this case, manually
switch the light on or off using the LIGHT ON/
AUTO/OFF switch.
•While the Sports or High-Speed Shutter mode
(੬ pg. 15) is engaged, the light is likely to stay on.
•While the Twilight mode (੬ pg. 15) is engaged, the
light will not activate.
DANGER
•The video light become extremely hot. Do not
touch it either while in operation or soon after
turning it off, otherwise serious injury may result.
•Do not place the camcorder into the carrying case
immediately after using the video light, since it
remains extremely hot.
•When operating, keep a distance of about 30 cm.
between the video light and people or objects.
•Do not use near flammable or explosive materials.
•It is recommended that you consult your nearest
JVC dealer for replacing the video light.
RECORDING Advanced Features
14
EN
Programme AE With Special Effects
1 second later, the mode is activated.
All you have to do to access any of the variety of
shooting effects is to turn the PROGRAM AE select
dial.
After 1 sec.
SEPIA
SELECT MODE
Turn the PROGRAM AE select dial until the
symbol of the function you want is aligned
with the mark.
Viewfinder
1
•The selected mode’s name and its indication
are displayed in the viewfinder for approx.
1 second. Then the name disappears, and
only the indication remains. The mode is
activated.
•When Auto Mode Lock or Auto Mode
Release mode is selected, only the mode’s
name is displayed. Then the name disappears
and the mode is activated.
NOTES:
● Only one effect can be engaged at a time.
● The screen becomes slightly reddish when the
fader (੬ pg. 18) is used in the Sepia mode.
● The screen becomes slightly dark in the High
Speed Shutter mode. Use in well-lighted
situations.
● In the High Speed Shutter or Sports modes,
picture colour may be adversely affected if
subject is lit by alternating discharge-type light
sources such as flourescent or mercury-vapour
lights.
Mark
C
U
+
FAR NEAR
PROGRAM AE
select dial
–
DIAL
SYMBOL
VIEWFINDER
INDICATION
DIAL
SYMBOL
VIEWFINDER
INDICATION
MODE
MODE
FG
FG:FOG
Electronic Fog Filter
LOCK
AUTO LOCK
Auto Mode Lock
Auto Mode Lock
Electronic Fog Filter
Locks the camcorder in Full Auto mode, preventing
incorrect operation due to accidental button
pressing during shooting.
Makes the picture look misty white, as when an
external fog filter is attached to the lens. Softens the
image and gives it a “fancy” look.
•In this mode the following controls are disabled;
FADE, WIDE, TITLE, DISPLAY, M.W.B (Manual
White Balance), Manual Focus, Focus Lock,
Exposure Control and MENU
ND
ND:ND EFFECT ND Effect
ND Effect
A black mist darkens the picture, as when an ND
filter is used. Helps to counter the effects of glare on
the subject.
RELEASE AUTO RELEASE Auto Mode Release
Auto Mode Release
Re-enables the controls that were disabled by Auto
Mode Lock.
EN
15
DIAL
SYMBOL
VIEWFINDER
INDICATION
DIAL
SYMBOL
VIEWFINDER
INDICATION
MODE
MODE
SEPIA
Sepia
SPORTS
Sports
Sepia
Sports
The scene being shot is recorded in sepia-tinted
(reddish-brown) monochrome, giving the effect of
an older movie. Use together with Wide (੬ pg. 18)
for the authentic look of a classic Hollywood
movie.
High shutter speed clearly captures fast-moving
action.
1/1000 sec.
1/1000
1/2000
S 1/1000
S 1/2000
1
High Speed Shutter
1/2000 sec.
TWILIGHT Twilight
2
High Speed Shutter
Twilight
High-Speed Shutter (1/1000s., 1/2000s.)
Captures faster action than Sports mode.
Dusk, twilight scenery, fireworks, etc., look more
natural and dramatic. The following happens when
Twilight mode is selected:
•Auto gain control is turned off.
•White Balance is set to “ ” (outdoor mode), but
can also be manually changed to another mode
(੬ pg. 21).
•Auto Focus becomes available only in the range of
10 m to infinity. To focus when the subject-to-
camera distance is less than 10 m, use manual
focusing (੬ pg. 17).
Exposure Control
This feature automatically adjusts the iris for the
best available picture quality, but you can override
and make the adjustment manually.
SELECT MODE
Turn the PROGRAM AE select dial to any
1
2
position except AUTO LOCK.
+
BRIGHTEN IMAGE
+
02
Press + (maximum +06). The Exposure level
indicator appears in the viewfinder.
OR . . .
DARKEN IMAGE
Exposure Level Indicator
Press – (maximum –06). The Exposure level
–
indicator appears in the viewfinder.
When you want to return to the factory
setting . . .
To brighten the image
RESTORE INITIAL SETTING
Press + and – simultaneously. The standard
setting is immediately restored and the
Exposure level indicator disappears.
–
06
+
06
3
To darken the image
RECORDING Advanced Features (cont.)
16
EN
Focusing
Auto Focus
The camcorder’s Full Range AF system offers continuous
shooting ability from close-up to infinity. However,
correct focus may not be obtainable in the situations
listed below (in these cases use manual focusing):
Focus
detection zone
•When two subjects overlap in the same scene.
•When illumination is low.*
•When the subject has no contrast (difference in
brightness and darkness), such as a flat, one-colour
wall, or a clear, blue sky.*
•When a dark object is barely visible in the viewfinder.*
•When the scene contains minute patterns or identical
patterns that are regularly repeated.
•When the scene is affected by sunbeams or light
reflecting off the surface of a body of water.
•When shooting a scene with a high-contrast
background.
* The low-contrast warning “
viewfinder.
” appears in the
Focus Lock
This feature locks the focus in place, which is especially
helpful in the following situations:
FAR
NEAR
•When things pass between your subject and the
camcorder. Engage the focus lock function to lock your
subject in before recording.
•When you want your subject to be focused, and to
appear in a corner of the screen. First, center on the
subject and focus using auto focus mode. Then engage
the focus lock function and move the camcorder until
the subject is where you want it.
PROGRAM AE select dial
SELECT MODE
Turn the PROGRAM AE select dial to any position
1
2
3
except AUTO LOCK.
LOCK FOCUS
Press FAR or NEAR. The focus lock indication “
”
appears in the viewfinder.
RELEASE FOCUS LOCK
Press FAR and NEAR simultaneously. The focus lock
indication disappears.
NOTES:
● If the lens is smeared or blurred, accurate focusing is
not possible. Keep the lens clean, wiping with a piece
of soft cloth if it gets dirty. When condensation occurs,
wipe with a soft cloth or wait for it to dry naturally.
● When shooting a subject close to the lens, zoom-out
first (੬ pg. 11). If zoomed-in in the auto focus mode,
the camcorder could automatically zoom out
depending on the distance between the camcorder and
the subject. *When Tele Macro (੬ pg. 23) is activated,
the camcorder will not zoom out automatically.
EN
17
Manual Focus
Power zoom lever
NOTE:
You should already have made the necessary viewfinder
adjustments (੬ pg. 6). If you haven’t, do so before
continuing.
SELECT MODE
Turn the PROGRAM AE select dial to any position
1
2
except AUTO LOCK.
ADJUST FOCUS
To farther subject . . .
Press and hold FAR. The Manual Focus indications
“
” appear and “ ” blinks.
Go to step 3.
FAR
NEAR
To nearer subject . . .
Press and hold NEAR. The Manual Focus indications
“
” appear and “ ” blinks.
Go to step 3.
PROGRAM AE select dial
LOCK FOCUS
Release FAR or NEAR. The focus indication is
3
4
replaced by the focus lock indication “
adjusted focus is locked in.
” and the
RELEASE MANUAL FOCUS MODE
Press FAR and NEAR simultaneously. The Manual
Focus mode is immediately released and the focus
lock indication disappears.
NOTES:
● Be sure to focus the lens in the maximum telephoto
position when you use the Manual Focus mode. If you
focus in on a certain subject in the wide-angle position,
sharply focused images cannot be obtained when
zoomed up because the depth-of-field is reduced at
longer focal lengths.
● When the focus level cannot be adjusted any farther or
closer, “ ” or “ ” will blink.
RECORDING Advanced Features (cont.)
18
EN
Fader
Function indication
This feature allows smooth fade-in and fade-out to black
blank screen. Fade-in works at recording start, and
fade-out works at recording end or when you enter
Record–Standby mode.
FADE
FADE
Fade-Standby
indication
SELECT MODE
Turn the PROGRAM AE select dial to any position
SELECT button
1
2
3
4
except AUTO LOCK.
SELECT FUNCTION
FADE
Press SELECT repeatedly until “
” appears.
ENGAGE FADE–STANDBY MODE
Press SET to engage the Fade–Standby mode.
The Fade-Standby indication “FADE” is displayed.
START RECORDING
Press Recording Start/Stop to start recording and
activate fade-in.
PROGRAM AE select dial
SET button
OR . . .
END RECORDING
Press Recording Start/Stop to end recording and
engage fade-out.
FADE IN
NOTES:
● Pressing and holding the Recording Start/Stop button
allows you to record a black blank screen.
● The screen becomes slightly reddish when the Fader is
used with Sepia (੬ pg. 15).
● With the Electronic fog filter mode (੬ pg. 14)
engaged, the image fades in/out to a white screen.
FADE OUT
Wide
This feature allows you to record black bars at the top
and bottom of the screen to produce a cinema-like
“wide-screen” effect.
Wide mode
SELECT MODE
Turn the PROGRAM AE select dial to any position
1
2
3
4
except AUTO LOCK.
SELECT FUNCTION
Press SELECT repeatedly until “ WIDE ” appears.
ENGAGE WIDE MODE
PressSET.
RESTORE NORMAL SCREEN
WIDE
Press SET again while “
” appears.
EN
19
Instant Titles
Title indication
TITLE
The camcorder has eight preset titles in memory. You can
superimpose one of them above a previously stored title as
shown in the illustration to the left.
HAPPY BIRTHDAY
HAPPY HOLIDAYS
OUR FAMILY
DISPLAY
SELECT MODE
MOVIE STAR
Turn the PROGRAM AE select dial to any position
PARTY TIME
except AUTO LOCK.
No indication
1
MERRY CHRISTMAS
WEDDING DAY
CONGRATULATIONS
SELECT FUNCTION
Press SELECT repeatedly until “ TITLE ” appears.
SELECT
SET
2
SELECT PRESET TITLE
The characters you
have set using
Character Generator
MENU
Engage the Record–Standby mode, then press SET to
cycle through the preset titles until the desired title is
3
displayed.
NOTES:
● To delete the Instant Title during recording, press SET.
● To recall a title, engage the Record–Standby mode and then
press SET to select the desired title.
PROGRAM AE
select dial
Character Generator
You can enter an original title of up to 18 characters.
ACCESS MENU SCREEN
except AUTO LOCK, then press MENU.
GAIN UP
S.LX
OFF
Turn the PROGRAM AE select dial to any position
TELE MACRO
1
INTERVAL TIMER OFF
REC TIME
OFF
07
ACCESS CHARACTER SET MENU
JLIP ID NO.
Press + or – to move the highlight bar to “SET
SET CHARACTER
DATE/TIME
CHARACTER”, then press NEAR. The Character Set
2
menu appears.
END :MENU KEY
INPUT CHARACTERS
Press +, –, FAR or NEAR to move the pointer to the
desired character, then press MENU. The selected
3
characters appear at the bottom of the screen. Repeat as
many times as desired (max. 18).
SET : MENU KEY
A
K
U
È
.
B
L
C
D
N
E
O
Y
F
P
Z
G
Q
Ä
H
R
Ö
I
J
T
À
:
M
S
•To select the location of the next character, press +, –,
FAR or NEAR to highlight the row of squares at the
bottom of the screen, then press FAR or NEAR to
make the desired location blink. Press + when you’re
done, and the pointer returns to the character grid.
V W X
Ü
&
ࡖ 9
Ì
,
Ò
’
Ù
Ñ Æ Ø
Å
¿
–
/
!
?
0 1 2 3 4 5 6 7 8
I
L I
END CHARACTER SETTING
press MENU twice to return to the normal screen.
END
CLEAR
Press +, –, FAR or NEAR to make “END” blink, then
4
SET : MENU KEY
NOTES:
A
B
L
C
D
N
E
O
Y
F
P
Z
G
Q
Ä
H
R
Ö
I
● To erase a character you entered mistakenly, make “CLEAR”
blink by pressing +, –, FAR or NEAR, then press MENU. All
characters are deleted at once. Or, to erase selected characters
only, first move the pointer to the row of squares by pressing +,
–, FAR or NEAR to highlight them. Press FAR or NEAR to make
the desired character blink, then press +, FAR or NEAR to move
the pointer to “ ” in the top left corner. Press MENU.
● To display the characters you have set — “Instant Titles” or
“Date/Time/Character Insert” (੬ pg. 20).
J
T
À
:
K
U
È
.
M
S
V W X
Ü
&
ࡖ 9
Ì
,
Ò
’
Ù
Ñ Æ Ø
Å
¿
–
/
!
?
0 1 2 3 4 5 6 7 8
I
L I KE YOU
ࡖ END
CLEAR
● Characters may be set only in the Record-Standby mode.
RECORDING Advanced Features (cont.)
20
EN
Date/Time Character Insert
SELECT
This feature allows you to display date, time and characters
in your viewfinder and on a connected colour monitor,
record them manually or automatically, and even make
your own titles.
NOTE:
You should already have performed the Date/Time
Setting procedure (੬ pg. 7). If you haven’t, do so before
continuing.
DISPLAY
SET
SELECT MODE
Turn the PROGRAM AE select dial to any position
PROGRAM AE
select dial
DISP.
1
2
3
except AUTO LOCK.
SELECT DISPLAY
DISP.
Press SELECT repeatedly until “
” appears.
Auto Date Record mode
Date-off mode
Date display
CHOOSE DISPLAY MODE
Press SET while in Record–Standby to cycle through
the modes as shown in the illustration at left.
Character Generator
Date/Time display
NOTES:
● The selected display can be recorded.
● If you don’t want to record the display, select Date-off
mode before shooting.
Auto Date Record mode
● If you want to delete the display during shooting, press
SET.
● If you want to call back a deleted display, engage the
Record–Standby mode and then select the desired
display mode using SET.
AUTO DATE
25.12.97
Auto date record
mode
Auto date record
executed
AUTO DATE RECORD
Your camcorder automatically records the date for about
5 seconds after recording is initiated in the following
situations:
•After changing the date.
•After loading a cassette.
Date display
Date/Time display
•After Auto Date Record mode is selected by pressing
SE T.
25.12.97
25.12.97
10:45
In this mode, the date is replaced after 5 seconds with
“AUTO DATE”.
Character Generator
NOTES:
● Setting PROGRAM AE to LOCK always engages this
mode, and disables all other modes.
● In the Auto Date Record mode, if the date changes
while you’re shooting, the date indication is recorded for
about 5 seconds from that point. It is not recorded
during any other recordings made on that day.
SET CHAR
IN PARIS, FRANCE
No Characters
stored
Example of stored
characters
EN
21
Manual White Balance Adjustment (M.W.B.)
SELECT
This camcorder’s Automatic Colour Temperature system
senses the colour temperature of the ambient lighting for
automatic white balance adjustment. However, precise
colour adjustment is not possible under the following
conditions:
• When an object is in various shades of the same colour.
• When a predominantly red or brown object is being shot
outdoors.
In these cases, use the camcorder’s built-in preset filters for white
balance adjustment.
SELECT MODE
SET
PROGRAM AE select dial
Turn the PROGRAM AE select dial to any position
1
2
3
except AUTO LOCK.
SELECT FUNCTION
M.W.B.
White balance
mode indicator
M.W.B.
Press SELECT reapeatedly until “
” appears.
MWB
SELECT WHITE BALANCE
Press SET (Manual White Balance) until the
required indication appears in the viewfinder.
No indication (Auto)
MWB
“MWB” ..... With a memorized personal White Balance
setting (see below)
“
“
“
” ......... Outdoors on sunny day
”......... Outdoors on cloudy day
” .......... Light source is halogen or tungsten lamp
MWB
MWB sets the colour temperature for the subject’s light
source so you can shoot with natural colours that are
unaffected by surroundings, even when there are multiple
subjects with different colour temperatures.
SELECT MODE
Turn the PROGRAM AE select dial to any position
1
2
except AUTO LOCK.
ADJUST FOCUS
Point the camcorder at a white, flat object such as a
sheet of white paper, and adjust focus manually
(੬ pg. 17).
ADJUST WHITE BALANCE
Press SET until “MWB” appears, then press and hold
SET for more than 3 seconds.
3
• “MWB” blinks in the viewfinder during adjustment, then
stops blinking but stays lit when adjustment is complete.
NOTES:
● To switch to automatic white balance adjustment, press SET until the indication disappears, or turn the PROGRAM AE
select dial to “AUTO LOCK”.
● Re-adjust the White Balance when the lighting has changed, when the camcorder has been turned on and off again, or
when the PROGRAM AE select dial’s position has been changed.
● It is helpful to connect your camcorder to a colour monitor when adjusting the white balance (“Basic Connections”
੬ pg. 27).
● When adjusted by putting coloured paper in front of the subject in step 2 (“ADJUST FOCUS”), this unit makes its colour
temperature standard for automatic white balance. So you can enjoy shooting with different colours. For example, when
adjusting with red, blue or yellow colours, the image becomes the colour which aproximates to green, orange or purple
respectively.
RECORDING Advanced Features (cont.)
22
EN
Using Menu For Detailed Adjustment
MENU
This camcorder is equipped with Program Manager, an
easy-to-use, on-screen menu system that simplifies many
of the more detailed camcorder settings.
SELECT MODE
Turn the PROGRAM AE select dial to any position
1
2
3
4
except AUTO LOCK.
ACCESS MENU SCREEN
Press MENU.
SELECT FUNCTION
+
FAR
Press + or – to place the highlight bar on the desired
NEAR
–
function.
MAKE SETTING
The setting procedure depends on the function you
select.
GAIN UP
TELE MACRO
INTERVAL TIMER OFF
S.LX
OFF
If you select GAIN UP, TELE MACRO, INTERVAL
TIMER, REC TIME or JLIP ID NO. . . .
.... press FAR or NEAR to cycle through the choices
until the desired setting appears.
If you select SET CHARACTER or DATE/TIME, . . .
.... press NEAR to access the selection menu for
each function (SET CHARACTER – ੬ pg. 19;
DATE/TIME – ੬ pg. 7).
REC TIME
OFF
07
JLIP ID NO.
SET CHARACTER
DATE/TIME
END :MENU KEY
CLOSE MENU
Press MENU. The normal screen reappears.
GAIN UP
NORM
ON
5
TELE MACRO
INTERVAL TIMER 1MIN
REC TIME
1/2S
07
JLIP ID NO.
NOTE:
SET CHARACTER
DATE/TIME
The menu is available only in the Record-Standby mode.
END :MENU KEY
PAUSE
If GAIN UP or TELE MACRO in the Menu has
been changed from the factory settings, this
mark appears in the viewfinder.
EN
23
MENU
GAIN UP
S.LX
To record a subject in a dark lit environment. When it is more
convenient to shoot the subject with a brighter image even if
the picture becomes slightly coarse. Automatically selected
when the PROGRAM AE select dial is set to AUTO LOCK
mode. (S.LX : Super LoLux)
NORM
OFF
To record a subject in a dimly lit environment. When it is
more convenient to shoot with a less coarse picture although
the subject becomes slightly dark.
Allows you to shoot dark scenes with no picture brightness
adjustment.
TELE MACRO
OFF
ON
Usually set to this position.
Usually the distance to a subject where the lens is in focus
depends on the zoom magnification. Unless there is a
distance more than 1m to the subject, the lens is out of focus
at the maximum telephoto setting. When set to “ON”, you
can shoot a subject as large as possible at a distance of
approx. 60 cm.
•Depending on the zoom position, the lens may go out of
focus.
OFF
15 S
INTERVAL TIMER
This feature allows you to set the parameters for Self-Timer
(੬ pg. 24) and Time-Lapse recording (੬ pg. 25).
30 S
1 MIN
5 MIN
OFF
1/4 S
1/2 S
1 S
REC TIME
This feature allows you to set the parameters for Animation
and Time-Lapse recording (੬ pg. 25).
JLIP ID NO.
This number is necessary when connecting the camcorder to a device such
as a computer using the J terminal (JLIP).
The numbers range from 01 to 99. Factory setting is 07.
SET CHARACTER
DATE/TIME
Allows you to input characters. (੬ pg. 19).
Allows you to set the current date and time (੬ pg. 7).
= Factory setting and when the PROGRAM AE Select Dial is set to
AUTO LOCK
NOTE:
During shooting in low light, Auto Focus accuracy may decrease even when Gain Up is used. In this case,
use Manual Focus (੬ pg. 17).
RECORDING Advanced Features (cont.)
24
EN
Self-Timer
Interval
You can set the delay between pressing RECORDING
START/STOP and the actual start of recording. If you
secure the camcorder, you (or whomever is operating the
camcorder) can enter the scene before recording starts.
Timer Indicator
1MIN
1/2S
Rec Time Indicator
MENU
NOTE:
Make sure the camcorder is in the Record-Standby mode
before performing the following steps.
+
ACCESS MENU SCREEN
Turn the PROGRAM AE select dial to any position
1
2
except AUTO LOCK, then press MENU.
NEAR
SET INTERVAL TIME
Press – or + to move the highlight bar down to
“INTERVAL TIMER”, then press FAR or NEAR to
cycle through the choices. Stop when the desired
time appears. Choose from “15S”, “30S”, “1MIN”,
“5MIN”, or select to turn the function “OFF”.
–
FAR
CLOSE MENU
Press MENU.
3
4
START DELAYED RECORDING
Tally lamp
Press RECORDING START/STOP. The tally lamp
begins blinking, and the blinking frequency
increases about 5 seconds before recording is to
start. Once recording begins, the lamp stops
blinking but stays lit.
To Release Self-Timer . . .
GAIN UP
S.LX
OFF
..... while the tally lamp is blinking, press RECORDING
START/STOP to stop the blinking, then set
“INTERVAL TIMER” to “OFF”.
TELE MACRO
INTERVAL TIMER OFF
REC TIME
OFF
07
JLIP ID NO.
SET CHARACTER
DATE/TIME
END :MENU KEY
1S
1/2S
1/4S
OFF
5MIN
1MIN
30S
15S
OFF
EN
25
Animation
Time-Lapse
Give stationary scenes or objects an illusion of
movement. This function allows you to shoot a
series of pictures, each slightly different, of the same
object for a brief period of time.
You can record sequentially at preset time spans.
Leaving the camcorder aimed at a specific subject,
you can record subtle changes over an extended
period of time.
NOTE:
NOTE:
Make sure the camcorder is in the Record-Standby
mode and the recording mode is set to “SP” before
performing the following steps.
Make sure the camcorder is in the Record-Standby
mode and the recording mode is set to “SP” before
performing the following steps.
ACCESS MENU SCREEN
ACCESS MENU SCREEN
Turn the PROGRAM AE select dial to any
Turn the PROGRAM AE select dial to any
1
2
position except AUTO LOCK, then press
MENU.
1
2
position except AUTO LOCK, then press
MENU.
SET RECORDING TIME
SET INTERVAL BETWEEN
Press – or + to move the highlight bar down to
“REC TIME”, then press FAR or NEAR to cycle
through the choices. Stop when the desired
time appears. Choose from “1/4S”, “1/2S”,
“1S”, or select to turn the function “OFF”.
Then press MENU to close Menu screen.
RECORDINGS
Press – or + to move the highlight bar down to
“INTERVAL TIMER”, then press FAR or NEAR
to cycle through the choices. Stop when the
desired time appears. Choose from “15S”,
“30S”, “1MIN”, “5MIN”, or select to turn the
function “OFF”.
START RECORDING
Press the Recording Start/Stop button after
focusing on the subject. The recording stops
automatically after the selected period of time.
SET RECORDING TIME
3
Press – or + to move the highlight bar down to
“REC TIME”, then press FAR or NEAR to cycle
through the choices. Stop when the desired
time appears. Choose from “1/4S”, “1/2S”,
“1S”, or select to turn the function “OFF”.
Then press MENU to close Menu screen.
3
ASSEMBLE SERIES OF
PICTURES
Repeat step 3 for the desired number of
pictures.
4
5
START TIME-LAPSE
RELEASE ANIMATION MODE
RECORDING
Set “REC TIME” in the Menu screen to “OFF”.
Press the Recording Start/Stop button.
Recording and intervals alternate
automatically.
4
5
NOTES:
RELEASE TIME-LAPSE MODE
To release when the tally lamp is not blinking,
set “REC TIME” and “INTERVAL TIMER” in the
Menu screen to “OFF”. To release when the
tally lamp is blinking, press the Recording
Start/Stop button to stop the blinking, then set
“INTERVAL TIMER” and “REC TIME” in the
Menu screen to “OFF”.
● For best results, make sure the camcorder is
secured when shooting in Animation or
Time-Lapse mode.
● Fade-in/out cannot be performed during
Animation or Time-Lapse shooting.
● Before performing other operations following
Animation or Time-Lapse recording, make sure
the Animation or Time-Lapse mode is deactivated.
PLAYBACK Using The Cassette Adapter
26
EN
Cassette Adapter
Use this to play back a VHS-C video cassette recorded
with this camcorder. It is fully compatible with any VHS
video cassette recorder. The C-P7U adapter is battery
powered and automatically performs tape loading and
unloading.
+
INSERT BATTERY
Slide the battery cover up to remove it, and install
one “R6(AA)” size battery as shown in the
illustration at left. Then reattach the cover.
1
2
3
VCR
INSERT CASSETTE IN ADAPTER
Slide the latch to open the adapter compartment
door, then insert the cassette and close the
compartment door.
Compartment door
PLAY BACK ON CONNECTED VCR
Load the cassette adapter into the VCR and play the
tape back as you would any other.
REMOVE CASSETTE FROM
ADAPTER
Slide the latch and the compartment door opens
automatically. Then insert your finger in the hole on
the underside of the adapter as shown in the
4
Sliding latch
Reels
illustration at left, push up and remove the cassette.
Compact video cassette
NOTES:
● During tape loading and unloading, do not touch the
reels for safety and tape protection.
● During special-effect playback (slow motion, still
frame, etc.), the picture may vibrate or noise bars may
appear on the screen.
● To record on a VCR using a compact cassette and the
adapter, cover the adapter’s recording safety hole with
adhesive tape.
Recording safety hole
PLAYBACK Basic Connections
EN
27
There are two basic types of connections. When making
the connections, refer also to your VCR and TV
instruction manuals.
Connection To A VCR [A]
(Editing, Dubbing and Playback)
NOTE:
Use the provided Audio and Video cables.
To AUDIO and
When
CONNECT CAMCORDER TO VCR
VIDEO connectors
connecting the
As shown in the illustration at left, connect the
1
Audio and Video cables between the AUDIO and
VIDEO connectors on the camcorder and those on
the VCR.
cables, open
the jack cover.
Audio and Video
cables (provided)
SUPPLY POWER
Turn on the camcorder, the VCR and the TV.
2
3
A
B
SELECT MODE
To AUDIO and
VIDEO IN
connectors
Set the VCR to its AUX input mode, and set the TV
to its VIDEO mode.
If your TV/VCR
has the SCART
connector, use
the provided
Connection To A TV With A/V Input
Connectors [B] (Playback ONLY)
cable adapter.
VCR
NOTE:
Use the provided Audio and Video cables.
CONNECT CAMCORDER TO TV
As shown in the illustration at left, connect the
1
2
Audio and Video cables between the AUDIO and
VIDEO connectors on the camcorder and those on
the TV.
SELECT MODE
Set the TV to its VIDEO or AV mode (as specified in
its instructions).
NOTES:
● It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery
pack.
● To monitor the picture and sound from the camcorder
without inserting a tape, set the camcorder’s Power
switch to “CAMERA”, then set your TV to the appropri-
ate input mode.
● If you have a TV or speakers that are not specially
shielded, do not place the speakers adjacent to the TV
as interference will occur in the camcorder playback
picture.
PLAYBACK Basic Playback
28
EN
NOTE:
PLAY/PAUSE
REW FF
Make sure you connect your camcorder as directed in
“Basic Connections” (੬ pg. 27).
LOAD A CASSETTE
Slide EJECT to open the cassette holder, then insert
the cassette with the label facing out. Press PUSH to
ensure the holder is closed and locked.
1
STOP
SELECT MODE
Set the Power switch to “PLAY”. The Power On
indicator lights.
2
3
4
PLAYBACK
Press PLAY/PAUSE. The playback picture appears in
the viewfinder and the connected TV.
STOP PLAYBACK
Press STOP.
Rewind or Fast-forward the tape
Press REW to rewind, or FF to fast-forward the tape
during Stop mode.
POWER
NOTE:
The camcorder shuts off automatically after about 5
minutes in Stop mode or Still Playback mode. To turn on
again, set the Power switch to “POWER OFF”, then to
“PLAY”.
Tape running
indicator
M-0:23:45
4
: Playback
3
: Fast-Forward/
Forward Search
: Rewind/Reverse
Search
2
Tape counter
6 : Still Playback
PLAYBACK Features
EN
29
FEATURE:
PURPOSE:
Manual Tracking
To eliminate noise bars that appear
on the screen during playback.
OPERATION:
NOTES:
1) Press either +/– button as many
times as necessary for best picture.
● To reset TRACKING to the original
preset, press both + and – buttons
simultaneously.
+
–
● Manual Tracking may not work
with tapes recorded on other VCRs
or camcorders.
FEATURE:
PURPOSE:
OPERATION:
Still Playback
To pause during playback.
1) Press PLAY/PAUSE during
playback.
2) To resume normal playback, press
PLAY/PAUSE again.
COUNTER R/M PLAY/PAUSE
NOTE:
Noise bars appear and pictures may
become monochrome during Still
Playback. This is normal.
FEATURE:
PURPOSE:
Shuttle Search
To allow high-speed search in either
direction.
STOP
OPERATION:
Forward Search
1) Press FF during playback.
Reverse Search
1) Press REW during playback.
REW
FF
NOTE:
Noise bars appear and pictures may
become monochrome or darken in
Shuttle Search. This is normal.
FEATURE:
PURPOSE:
Counter Memory Function
To make it easier to locate a specific
tape segment.
OPERATION:
1) Press COUNTER R/M and hold for
more than 2 seconds. The counter
resets to “0:00:00”.
2) Press COUNTER R/M. “M”
appears.
3) After recording or playback, press
STOP, then REW. The tape
automatically stops at or close to
0:00:00.
4) Press PLAY/PAUSE to start
playback.
NOTES:
● The counter memory functions in
the FF and REW modes.
● To disable Counter Memory
Function, press COUNTER R/M so
the “M” disappears.
EDITING
30
EN
Tape Dubbing
CONNECT EQUIPMENT
Following the illustration at left, connect the
camcorder and the VCR.
PLAY/PAUSE
Power switch
1
2
PREPARE FOR DUBBING
Set the camcorder’s Power switch to “PLAY”, turn
on the VCR’s power, and insert the appropriate
cassettes in the camcorder and the VCR.
SELECT VCR MODE
Engage the VCR’s AUX and Record-Pause modes.
3
4
FIND EDIT-IN POINT
Engage the camcorder’s Play mode to find a spot
just before the edit-in point. Once it’s reached, press
PAUSE on the camcorder.
To AUDIO and
VIDEO OUT
connectors
When connecting
the cables, open the
jack cover.
START EDITING
Press PLAY on the camcorder and engage the VCR’s
Record mode.
Audio and
Video cable
(provided)
5
6
7
STOP EDITING TEMPORARILY
Engage the VCR’s Record-Pause mode and press
PAUSE on the camcorder.
If your TV/VCR
has the SCART
connector, use
the provided
To AUDIO and
VIDEO IN
connectors
EDIT MORE SEGMENTS
Repeat steps 4 through 6 for additional editing, then
stop the VCR and camcorder when finished.
cable adapter.
VCR (Recording deck)
EN
31
SET REMOTE/VCR CODE
Random Assemble Editing
[R.A.Edit]
SET REMOTE TO OPERATE VCR
Create edited videos easily using your
camcorder as the source player. You can select
up to 8 “cuts” for automatic editing, in any
order you like. R.A.Edit is more easily
performed when the MBR (Multi-Brand
Remote RM-V704U or RM-V700U) is set to
operate with your brand of VCR (see VCR
CODE LIST), but can also be performed by
operating the VCR manually.
Turn off the power to the VCR and point the remote
toward the VCR’s infrared sensor. Then, referring to
the VCR CODE LIST on the left, press and hold MBR
SET, and press button (A) and then (B).
1
2
•The code is automatically set once you release the
MBR SET button, and the VCR’s power comes on.
OPERATE THE VCR
Make sure the VCR’s power is on. Then, while
holding VCR CTL, press the button on the remote for
the desired function. The functions the remote can
control are PLAY, STOP, PAUSE, FF, REW and VCR
REC STBY (you don’t need to press VCR CTL for this
one).
You’re now ready to try Random Assemble Editing.
MBR SET
1
4
7
2
5
8
3
6
9
VCR CTL
IMPORTANT
Although the MBR is compatible with JVC VCRs and
those of many other makers, it may not work with yours
or may offer limited functions.
RM-V704U or
RM-V700U
(provided)
0
NOTES:
● If the VCR’s power doesn’t come on in step 1, try
another code from the VCR CODE LIST.
● Some brands of VCR don’t come on automatically. In
this case, turn the power on manually and try step 2.
● If the RM-V704U/V700U is not able to control the
VCR, use the controls on the VCR.
VCR CODE LIST
VCR BRAND BUTTONS
VCR BRAND BUTTONS
NAME
(A) (B)
NAME
(A) (B)
AKAI
6
6
7
2ꢀ
4ꢀ
7
PHILIPS
1
9
1
9
9
9
1
3
9ꢀ
5ꢀ
1ꢀ
4ꢀ
1ꢀ
6ꢀ
2ꢀ
3
MAKE CONNECTIONS
BLAUPUNKT
FERGUSON
1
3
9
9
3
7ꢀ
8ꢀ
2
CONNECT TO . . .
A
JVC VCR EQUIPPED WITH REMOTE
SANYO
3
3
6ꢀ
5
GRUNDIG
HITACHI
1
3
4ꢀ
4
1
PAUSE TERMINAL
Connect the editing cable to the Remote PAUSE
terminal.
SELECO, REX
SHARP
9
9
1ꢀ
6
6
6
6ꢀ
3
B
JVC VCR NOT EQUIPPED WITH REMOTE
PAUSE TERMINAL
1
1
5ꢀ
`
JVC
A
B
C
9
9
9
1ꢀ
6ꢀ
3
Connect the editing cable to the R.A.EDIT
connector.
SONY
6
6
3
3
5ꢀ
`ꢀ
9ꢀ
1
MITSUBISHI
NEC
6
6
7ꢀ
8
ꢀ
C
NON-JVC VCR WITH NEITHER
Connect the editing cable to the RM-V704U/
V700U’s Pause-In jack.
3
3
7ꢀ
8
THOMSON,
TELEFUNKEN,
SABA,
9
9
9
3
1ꢀ
6ꢀ
7ꢀ
2
PANASONIC
1
1
1
9
1
3ꢀ
7ꢀ
1ꢀ
4ꢀ
8
All other connections are as shown in the illustration
on page 32.
NORDMENDE
TOSHIBA
6
6
9ꢀ
1
CONTINUED ON NEXT PAGE
EDITING (cont.)
32
EN
REW/FF
PREPARE CAMCORDER
Insert a recorded tape and set the Power switch to
“PLAY”.
STOP
CANCEL
2
3
PREPARE VCR
IN/OUT
R.A. EDIT
PLAY/PAUSE
Turn the power on, insert a recordable tape and
engage the AUX mode (refer to VCR’s instructions).
SELECT SCENES
ACCESS R.A. EDIT COUNTER
DISPLAY
Press PLAY/PAUSE, then press R.A. EDIT and the
counter display appears in the viewfinder and the
screen of the connected TV.
1
2
3
Open the cover
REGISTER BEGINNING OF SCENE
To AUDIO
and VIDEO
out connectors
To J terminal
(JLIP)
Press REW or FF to locate the beginning of a scene
you want, then press IN/OUT to register that point.
The data appears under IN on the display.
REGISTER END OF SCENE
Press REW or FF to locate the end of the scene and
press IN/OUT to register it. The data appears under
OUT on the display. The total time of the registered
scene(s) is displayed at the bottom of the screen.
Audio and
Video cable
(provided)
Editing cable
(provided)
A B
C
REGISTER ADDITIONAL SCENES
Repeat steps 2 and 3 for each additional scene
(as many as 8).
To AUDIO
and VIDEO IN
connectors
To Remote
PAUSE
4
5
MAKE CORRECTIONS
If your TV/VCR
has the SCART
connector, use
the provided
To Pause-In
Press CANCEL during steps 2 and 3 to erase the
most recently registered point.
cable adapter.
NOTES:
● The RM-V704U/V700U can be used to operate other
camcorder functions as well. Point the
RM-V704U/V700U at the camcorder’s remote sensor and
press any of the following buttons (function apears in
parentheses):
VCR (Recording deck)
RM-V704U/V700U
(provided)
IN/OUT
CANCEL
VCR REC STBY
ON/OFF
— ON/OFF (camcorder R.A. EDIT)
— IN/OUT (camcorder IN/OUT)
— CANCEL (camcorder CANCEL)
● There must be at least one second between an in-point and
its corresponding out-point.
● To ensure correct operation, leave at least 15 seconds open
between scenes.
● Blank portions of tape cannot be registered as in-points or
out-points.
IN
OUT
IN
OUT
ᮣ 1 0:00:25
1
2
3
0:00:25
0:03:18
0:02:33
0:01:05
0:03:31
0:02:53
2
● If it takes more than 5 minutes to search for an in-point, the
VCR’s Record-Pause mode is cancelled and editing doesn’t
take place.
3
4
ᮣ 4 0:04:11
5
5
6
6
7
7
8
8
● Pressing R.A.EDIT clears all in- and out-points from
memory.
● Leave a small margin for error around each in-point to
ensure the scene is recorded in its entirety.
COUNTER
TOTAL
0:00:25
0:00:00
COUNTER
TOTAL
0:04:11
0:01:13
EN
33
AUTOMATIC EDITING TO VCR
ORIGINAL TAPE (camcorder)
1
IN
3
2
IN
ENGAGE VCR’S RECORD–PAUSE
MODE
OUT
IN OUT
OUT
Point the remote control toward the VCR’s infrared
sensor and press VCR REC STBY, or manually
engage the VCR’s Record-Pause mode.
1
2
3
BEGIN AUTOMATIC EDITING
Press EDIT on the camcorder, and the previously
selected scenes are copied to the VCR in the
specified order.
EDITED TAPE (VCR)
STOP
END AUTOMATIC EDITING
When all selected scenes have been copied, the
camcorder and VCR enter the still or pause mode.
Press STOP on both units.
EDIT
•When finished editing, be sure to disconnect the
editing cable and the audio/video cable.
NOTES:
C
● If you performed step 1 on page 31 (“MAKE
CONNECTIONS”), keep the remote control pointed at
the VCR during editing.
● The on-screen display only appears while the
camcorder searches for each scene.
● There may be noise at in- or out-points on the edited
tape with certain VCRs.
SUPPLEMENTAL INFORMATION ON THE REMOTE CONTROL
Using the RM-V704U/V700U, it is also possible to perform
deck-to-deck Random Assemble Editing. The playback
deck must be an R.A. Edit-capable JVC VCR. The recording
deck can be...
Ⅲ a VCR other than JVC, or
AV OUT
Player (JVC VCR)
To
Ⅲ a JVC VCR which has neither a Remote PAUSE nor an
R.A. EDIT connector
Editing cable
(provided)
R.A. EDIT
How to use:
— Connect the playback deck and RM-V704U/V700U as
shown on the left.
AV IN
— Set the RM-V704U/V700U to correspond to the brand
of the recording deck. (੬ pg. 31)
Recording deck
— For Random Assemble Editing procedure, please refer to
the instruction manual of the JVC VCR you are using as
the playback deck.
To
PAUSE IN
Notes:
Ⅲ RM-V704U/V700U cannot be used to control the playback deck.
Ⅲ RM-V704U/V700U is capable of controling basic operations of
the recording deck. While pressing VCR CTL, press PLAY, STOP,
PAUSE, FF or REW for these functions. (Not possible with some
brands and models). Other buttons cannot be used.
RM-V704U
or RM-V700U
(provided)
Ⅲ To put the recording deck in the Record-Pause mode, use the
controls on the recording deck itself.
USING REMOTE CONTROL UNIT
34
EN
The Full-Function Remote Control Unit can operate this
camcorder from a distance as well as the basic
operations (PLAY, STOP, PAUSE, FF, and REW) of your
VCR. This remote control unit makes additional
recording functions possible.
A
B
Installing The Battery
Release tab
Lock hole
PULL OUT BATTERY HOLDER
Pull out the battery holder according to the type of
1
remote control unit you have.
1
2
A
Type
: Pull out the battrery holder while sliding
the lock hole.
B
Type
: Pinch the release tab and pull out the
battery holder.
0
!
3
4
5
INSERT BATTERY
@
Making sure the plus (+) side is up, insert the lithium
battery (CR2025)* into the battery holder.
6
7
8
9
#
$
%
^
2
3
REPLACE BATTERY HOLDER
Insert the battery holder into the remote control unit,
and push the holder until it clicks into place.
* Read the caution concerning lithium batteries
(੬ pg. 2).
&
RM-V704U or RM-V700U
(provided)
BUTTONS
FUNCTIONS
With the camcorder’s power switch set to
“CAMERA”.
With the camcorder’s power switch set to
“PLAY”.
1 PAUSE IN Connector
—
੬ pg. 32
2 Infrared beam
transmitting window
Transmits the beam signal.
3 MBR SET Button
4 INT. TIME Button
5 REC TIME Button
6 FF Button
—
Self-Timer/Time-Lapse (੬ pg. 35)
Animation/Time-Lapse (੬ pg. 35)
Retake (forward) (੬ pg. 13)
Retake (rewind)/Quick Review (੬ pg. 12)
—
੬ pg. 31
—
—
FF/FF Shuttle Search (੬ pg. 28)
Rew/Rew Shuttle Search (੬ pg. 28)
Pause (੬ pg. 28)
7 REW Button
8 PAUSE Button
9 PLAY Button
—
Playback start (੬ pg. 28)
0 START/STOP Button
! VISS Button
Functions same as the Recording Start/Stop button on the camcorder.
Index Code marking (੬ pg. 35)
—
@ ZOOM (T/W) Buttons
# VCR CTL Button
$ A.DUB Button
% STOP Button
^ INSERT Button
& R.A.EDIT Buttons
Zoom in and out (੬ pg. 11)
—
—
—
—
—
—
੬ pg. 31
Audio dubbing (੬ pg. 37)
Stop (੬ pg. 28)
Insert Editing (੬ pg. 36)
੬ pg. 32
EN
35
FEATURE:
PURPOSE:
Self-Timer, Animation and Time-Lapse
The remote control lets you set/release
Interval Timer and Rec Time functions
as well as the Menu screen.
Transmitted beam
effective area
OPERATION:
Self-Timer
1) Set
Instead of performing steps 1 through 3
on pg. 24 (“Self-Timer”), press INT.
TIME on the remote control. Each time
INT. TIME is pressed, the Interval Timer
indicator appears, changing in the
following order: 15S, 30S, 1MIN, 5MIN
and No indication (off).
15°
Remote sensor
15°
When using the remote control, be sure to
point it at the remote sensor. The above
illustration shows the approximate transmitted
beam effective area for indoor use.
The transmitted beam may not be effective or
may cause incorrect operation outdoors or
when the remote sensor is directly exposed to
sunlight or powerful lighting.
2) Release
Instead of setting “INTERVAL TIMER” to
“OFF” in the Menu, press INT. TIME on
the remote control until the Interval
Timer indicator disappears.
Animation
1) Set
Instead of performing steps 1 and 2 on
pg. 25 (“Animation”), press REC TIME
on the remote control. Each time REC
TIME is pressed, the Rec Time indicator
appears, changing in the following
order: 1/4S, 1/2S, 1S and No indication
(off).
Interval Timer Indicator
Viewfinder
2) Release
Instead of using the Menu in step 5 on
pg. 25, press REC TIME on the remote
control until the Rec Time indicator
disappears.
INDEX
1MIN
1/2S
Index Code
Marking
Time-Lapse
1) Set
Rec Time Indicator
Instead of performing steps 1 through 3
on pg. 25 (“Time-Lapse”), press INT.
TIME and REC TIME on the remote
control. Each time INT. TIME is
pressed, the Interval Timer indicator
appears, changing in the following
order: 15S, 30S, 1MIN, 5MIN and No
indication (off). Each time REC TIME is
pressed, the Rec Time indicator
appears, changing in the following
order: 1/4S, 1/2S, 1S and No indication
(off).
2) Release
Instead of using the Menu in step 5 on
pg. 25, press INT. TIME and REC TIME
on the remote control until the
indicators disappear.
NOTE:
Also refer to pgs. 24 and 25.
START/STOP
FEATURE:
PURPOSE:
Index Code Marking
To give you automatic access to any
selected point on a recording.
1) Press VISS once to place the index
code. “INDEX” blinks in the
viewfinder during marking.
If VISS is pressed during Record–
Standby mode, the mark is placed
where RECORDING START/STOP is
pressed.
VISS
INT. TIME
REC TIME
OPERATION:
NOTE:
RM-V704U or RM-V700U
(provided)
USING REMOTE CONTROL UNIT (cont.)
36
EN
Insert Editing
COUNTER R/M
You can record a new scene into a previously recorded
tape, replacing a section of the original recording with
minimal picture distortion at the in- and out-points. The
original audio remains unchanged.
NOTE:
Use the RM-V704U or RM-V700U remote control unit to
perform this procedure.
SELECT MODE
Set the Power switch to “PLAY”.
1
FIND EDIT-OUT POINT
Play back the tape, locate the point and press
2
3
PAUSE on the camcorder or the remote control.
POWER
RESET COUNTER
Press and hold COUNTER R/M for more than
2 seconds to reset the tape counter, then press for
less than 1 second and make sure “M” appears in
the viewfinder.
M-0:23:45
Tape Counter
Insert editing indicator
FIND EDIT-IN POINT
Press REW to go a little beyond the beginning of the
scene you want to replace, press PLAY to view the
recorded tape, and press PAUSE at exactly at the
point where the new scene should start.
4
5
Viewfinder
ENGAGE INSERT EDITING MODE
Press and hold INSERT, and without releasing
INSERT, press and release PAUSE. The Insert
mode is engaged, and the scene the camcorder is
aimed at appears on the screen.
BEGIN INSERT EDITING
Press RECORDING START/STOP. When the counter
reaches “0:00:00”, editing stops automatically and
the camcorder enters the Insert-Pause mode.
6
7
END INSERT EDITING
Press STOP.
START/STOP
REW
PAUSE
NOTES:
● After step 5, Retake (੬ pg. 12) can be performed.
● The tape may stop slightly before or after the
designated end point, and noise bars may appear.
Neither indicates a defect in the unit.
● Only video signal is recorded in the Insert Editing
mode.
INSERT
PLAY
RM-V704U or RM-V700U
(provided)
EN
37
Audio Dubbing
Audio dubbing indicator
You can record a new soundtrack on a prerecorded tape
(normal audio only).
e
Viewfinder
M-0:05:20
** Perform steps 1, 2 and 3 of the Insert Editing procedure
(੬ pg. 36) before continuing.
•The sound comes from the built-in mike.
FIND EDIT-IN POINT
Press REW to go a little beyond the beginning of the
1
scene onto which you want to dub new audio, press
PLAY to view the recorded tape, then press PAUSE
at exactly the point where dubbing should start.
ENGAGE AUDIO DUB STANDBY
MODE
Press and hold A. DUB, and without releasing
2
3
A. DUB, press and release PAUSE.
BEGIN AUDIO DUBBING
Mike
Press PLAY. When the counter reaches “0:00:00”,
Audio Dubbing stops automatically and the
camcorder enters the Audio Dub-Standby mode.
END AUDIO DUBBING
Press STOP.
4
REW
NOTES:
A. DUB
PAUSE
● Do not press FF or REW during Audio Dub-Standby, or
the edit points will not be accurate.
● If the mike is too close to the TV, or if the TV’s volume
is too high, whistling or howling may occur.
PLAY
RM-V704U or RM-V700U
(provided)
NOTES (for Insert Editing and
Audio Dubbing):
● Insert Editing and audio Dubbing may not work
correctly if the tape contains blank segments, or if the
recording speed was changed during the original
recording.
● To edit/dub onto a tape with the recording safety tab
removed, cover the hole with adhesive tape.
● Do not press STOP during Insert Editing or Audio
Dubbing, or the edit points will not be accurate.
● During Insert Editing and Audio Dubbing, when Insert–
Pause or Audio Dub–Standby is engaged, the counter
may go slightly past “0:00:00”. Recording, however,
stops at exactly 0:00:00.
TROUBLESHOOTING
38
EN
SYMPTOM
POSSIBLE CAUSE(S)
POWER
No power is supplied.
● The battery pack has not been attached correctly
(੬ pg. 4).
● The battery pack is not charged (੬ pg. 4).
● The power supply has not been correctly connected
(੬ pg. 5).
The power suddenly goes off and
doesn’t come back on by itself.
● The battery pack has completely discharged.
● Remove the cassette and disconnect the power source,
then after a few minutes, try turning the power back on. If
it still doesn’t come on, consult your nearest JVC dealer.
RECORDING
Recording cannot be performed.
● The recording tape’s Erase Protection tab is missing.
Cover the hole with adhesive tape. (Some tapes have
sliding tabs. In this case, check the position of the tab.)
Recording does not start.
● The camcorder Power switch has not been set to
“CAMERA” (੬ pg. 10).
PLAYBACK
The tape is running, but there’s no
playback picture.
● The TV has not been set to its VIDEO mode.
● If A/V connection is used, the TV’s VIDEO/TV switch has
not been set to VIDEO.
Noise bars appear in the playback
picture.
● Manual Tracking has not been performed (੬ pg. 29).
Playback picture is blurred or
interrupted.
● The video heads are dirty or worn out. Consult your
nearest JVC dealer for head cleaning or replacement.
The counter indication is blurred
during Still playback.
● This is normal.
TAPE TRANSPORT
The tape stops during fast-forward or
rewind.
● The Counter Memory Function has been activated
(੬ pg. 29).
Rewinding or fast-forwarding cannot
be performed.
● The tape is already fully wound on one reel or the other.
EN
39
SYMPTOM
POSSIBLE CAUSE(S)
OTHER
The tape won’t eject.
● The battery pack is running low.
Some functions are not available.
● The PROGRAM AE select dial is set to “AUTO LOCK”.
Vertical white lines appear when
shooting a very bright object.
● This sometimes occurs when the contrast between the
background and the object is great. It is not a defect of
the camcorder.
Bright, crystal-shaped spots appear
in the viewfinder.
● Sunlight is directly entering the lens.
The picture is blurred in the Quick
Review or Retake mode.
● This is normal while recording in the LP mode. Some noise
may be present while recording in the SP mode (੬ pg. 8).
An error number (i.e. E03) appears
in the viewfinder.
● Turn the camcorder’s power off, then disconnect the
power source. After a few minutes, try turning the power
on again. If the error number still appears in the view-
finder, consult your nearest JVC dealer.
The image is out of focus.
● The diopter needs to be adjusted (੬ pg. 6).
● The scene being shot is adversely affecting the operation
of Auto Focus (੬ pg. 16).
A character generator title and the
date and time displays disappear
from the viewfinder.
● If you remove the power source from the camcorder while
the power is on, all settings and selections are erased.
Make sure to turn the camcorder’s power off before
disconnecting the power source.
Even though the Lens Cover is open,
the Lens Cover Warning indicator
blinks.
● The Lens Cover Warning indicator may blink when the
camcorder is used in dark areas, regardless of the position
of the Lens Cover.
The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio,
etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit
(battery pack, AC Power Adapter/Battery Charger, etc.) and clock battery; and then re-connect it and
proceed as usual from the beginning.
INDEX Controls
40
EN
6 7 8 9 0 !
1
2
@
#
$
3
4 5
q
% ^ & * ( )
Controls
1 Diopter Adjustment ............................ ੬ pg. 6
2 Power Zoom Lever ............................ ੬ pg. 11
3 BATT. [Battery] RELEASE Switch .........੬ pg. 4
4 Recording Start/Stop Button ................੬ pg. 10
5 POWER Switch .................................. ੬ pg.10,28
6 STOP Button ...................................... ੬ pg. 28
@ REW Button ....................................... ੬ pg. 28
RETAKE R [Quick Review] Button....... ੬ pg. 12
# FF Button ........................................... ੬ pg. 28
RETAKE F Button................................ ੬ pg. 12
$ PLAY/PAUSE Button ........................... ੬ pg. 28
% SELECT Button ................................... ੬ pg. 18
^ SET Button ......................................... ੬ pg. 18
& MENU Button .................................... ੬ pg. 22
* PROGRAM AE Select Dial .................. ੬ pg. 14
7 Tape Length [T30•45•60]
Select Button...................................... ੬ pg. 8
COUNTER R [Reset]/M [Memory]
Button ................................................ ੬ pg. 29
( Multi-Function Control
8 EDIT Button ....................................... ੬ pg. 33
•Exposure +/– ................................... ੬ pg. 15
•Focus FAR/NEAR ............................. ੬ pg. 16
•Menu Setting Change ....................... ੬ pg. 22
•Tracking +/– .................................... ੬ pg. 29
9 Recording mode [SP/LP] Select
Button ................................................ ੬ pg. 8
R.A.EDIT CANCEL Button ...................੬ pg. 32
) PUSH Button ..................................... ੬ pg. 8
q EJECT Switch...................................... ੬ pg. 8
0 R.A.EDIT Button................................. ੬ pg. 32
! R.A.EDIT IN/OUT Button....................੬ pg. 32
EN
41
W E R T
Y
o
p
u
w Q
O
i
U
e I r t y
Connectors
Other Parts
w J terminal (JLIP (Joint Level Interface Protocol)
o Video Light (GR-AX470 only).............. ੬ pg. 13
Connector.)
p •Camera sensor
(Located beneath the jack cover)
Be careful not to cover this area; built-in
here is the sensor necessary for shooting.
•Remote sensor................................. ੬ pg. 35
•Connect the Editing Cable when performing
Random Assemble Editing (੬ pg. 32).
•It is used to connect the camcorder to a device
such as a personal computer.
Q Microphone ....................................... ੬ pg. 37
W Shoulder Strap Eyelets ........................ ੬ pg. 9
E Clock Battery Compartment ................ ੬ pg. 6
R Battery Pack Mount ........................... ੬ pg. 4
T Electronic Viewfinder......................... ੬ pg. 6
Y LENS COVER Switch ......................... ੬ pg. 10
U Grip Strap .......................................... ੬ pg. 9
For further detail consult your nearest JVC
dealer. Information (in English) is also available
e DC IN Jack ......................................... ੬ pg. 5
The jacks
r
to
y
are located beneath the jack cover.
r VIDEO OUT Jack ............................... ੬ pg. 27
I VIDEO LIGHT ON/AUTO/OFF Switch
t RF DC OUT Jack
y AUDIO OUT Jack .............................. ੬ pg. 27
(GR-AX470 only) ............................... ੬ pg. 13
O Tripod Mounting Socket ......................੬ pg. 9
Indicators
u Tally Lamp ......................................... ੬ pg. 10
i Power On Indicator ........................... ੬ pg. 10
INDEX Viewfinder
42
EN
1 2 3
4
5
6 7
%
^
&
*
(
)
q
w
e
18MIN
DISP.
T30
REC SP
8
9
0
SEPIA
LENS COVER
–05
MWB
FADE
PAUSE
1MIN
1/2S
INDEX
!
@
#
$
TAPE END
MERRY CHR ISTMAS
25.12.97 10:24
Viewfinder Indications
1 Cassette Warning/Remaining
% Battery Pack Remaining Power Indicator
Tape Time .......................................... ੬ pg. 10
Changes as follows according to the battery pack’s
remaining power level: “
”.
When no cassette is inserted or when Erase
Protection tab is not in the position that allows
recording, the Cassette ( ) Warning blinks.
Otherwise, the Remaining Tape Time is
displayed.
When the power is almost gone, the indicator
blinks, then the unit shuts off. Replace the
battery pack with a fully charged one.
(Note: The symbol containing 3 darkened
squares —
— does not necessarily mean
2 Recording mode [SP/LP] indicator ......੬ pg. 8
that the battery pack is fully charged.)
3, 9 PROGRAM AE Indicator................੬ pg. 14
Displayed at 3 for approx. 1 second when the
PROGRAM AE select dial is switched from one
position to another. Then only the indicator
remains at 9.
^ Focus Indicator .................................. ੬ pg. 16
& Exposure Level Indicator ..................... ੬ pg. 15
* White Balance Mode Indicator ........... ੬ pg. 21
( Menu Setting Change Indicator........... ੬ pg. 22
) Index Code Marking .......................... ੬ pg. 35
4 Program Manager Function
Indication .......................................... ੬ pg. 18
Appears when the PROGRAM AE select dial is
set to any position other than AUTO LOCK.
q Clock Warning
Displayed for about 5 seconds if the clock
(lithium) battery is not in place or is exhausted
when power is turned on. Also displayed for
about 5 seconds when clock battery becomes
exhausted while using the camcorder.
For inserting or replacing the clock
5 Lens Cover Warning .......................... ੬ pg. 10
6 Tape Length Display .......................... ੬ pg. 8
7 Zoom Level Indicator......................... ੬ pg. 11
8 Recording Indicator ........................... ੬ pg. 10
0 Fade–Standby Indicator ......................੬ pg. 18
battery .................................................. ੬ pg. 6
w Condensation Warning
! Interval Time/Recording
When this indication appears, all functions are
disabled. Turn the unit off (without removing the
power source) for a few hours, and when you
turn it on again the indicator should disappear.
Time Indicator.................................... ੬ pg. 24
@ Record–Standby Mode Indicator.........੬ pg. 10
# Instant Title Display ........................... ੬ pg. 19
$ Date/Time Character Display ..............੬ pg. 20
e Tape End Display ............................... ੬ pg. 10
Appears when the end of the tape is reached
during playback, recording or fast-forward.
CAUTIONS
DANGER:
EN
43
.... charge in an environment where
temperatures are within the tolerances shown
in the chart below. This is a chemical
reaction type battery—cooler temperatures
impede chemical reaction, while warmer
temperatures can prevent complete charging.
.... store in a cool, dry place. Extended exposure
to high temperatures will increase natural
discharge and shorten service life.
.... avoid prolonged uncharged storage.
.... remove from charger or powered unit when
not in use, as some machines use current
even when switched off.
•The video light becomes extremely hot. Do not
touch it either while in operation or soon after
turning it off, otherwise serious injury may result.
•Do not place the camcorder into the carrying case
immediately after using the video light, since it
remains extremely hot.
•When operating, keep a distance of about 30 cm
between the video light and people or object.
•Do not use near flammable or explosive materials.
•Consult your nearest JVC dealer for replacing the
video light unit.
3. To prevent damage to the camcorder . . .
.... replace the battery pack when it begins to
deliver less recording time per charge.
General Battery Precautions
•When the C-P6U or C-P7U (cassette adapter) is
not functioning even when correctly operated, the
batteries are exhausted. Replace them with fresh
ones.
NOTE:
It is normal for the battery pack to be warm after
charging, or after use.
•Use only the following batteries:
C-P6U or C-P7U ....................... R6 (AA) size
Temperature Ranges
Charging ................................... 10°C to 35°C
Operation ................................. 0°C to 40°C
Storage...................................... –10°C to 30°C
Please make note of the following rules for battery
use. When misused, batteries can leak or explode.
NOTES:
1. Refer to the instructions when replacing the
battery.
2. Do not expose batteries to excessive heat as they
can leak or explode.
3. Do not dispose of batteries in a fire.
4. Remove the battery from the unit if it is to be
stored for an extended period to avoid battery
leakage which can cause malfunctions.
● Recharging time is based on room temperature of
20°C.
● The lower the temperature, the longer recharging
takes.
Cassettes
To properly use and store your cassettes, be sure to
read the following cautions:
Battery Packs
1. During use . . .
The supplied battery pack is a nickel-
cadmium battery. Before using the
supplied battery pack or an optional
battery pack, be sure to read the
following cautions:
.... make sure the cassette bears the VHS-C
mark.
.... be aware that recording onto prerecorded
tapes automatically erases the previously
recorded video and audio signals.
.... make sure the cassette is positioned properly
when inserting.
.... do not load and unload the cassette
repeatedly without allowing the tape to run
at all. This slackens the tape and can result in
damage.
1. To avoid hazard . . .
Terminals
.... do not burn.
.... do not short-circuit the terminals.
.... do not modify or disassemble.
.... use only specified chargers.
.... do not open the front tape cover. This
exposes the tape to fingerprints and dust.
2. To prevent damage and prolong service
life . . .
2. Store cassettes . . .
.... do not subject to unnecessary shock.
.... avoid repeated charging without fully
discharging.
.... away from heaters or other heat sources.
.... out of direct sunlight.
.... where they won’t be subject to unnecessary
shock or vibration.
.... where they won’t be exposed to strong
magnetic fields (such as those generated by
motors, transformers or magnets).
.... vertically, in their original cases.
CAUTIONS (cont.)
About moisture condensation . . .
44
EN
Main Unit
•You have observed that pouring a cold liquid into
a glass will cause drops of water to form on the
glass‘ outer surface. This same phenomenon
occurs on the head drum of a camcorder when it
is moved from a cool place to a warm place, after
heating a cold room, under extremely humid
conditions or in a place directly subjected to the
cool air from an air conditioner.
1. For safety, DO NOT . . .
.... open the camcorder’s chassis.
.... disassemble or modify the unit.
.... short-circuit the terminals of the battery pack.
Keep it away from metallic objects when not
in use.
.... allow inflammables, water or metallic objects
to enter the unit.
.... remove the battery pack or disconnect the
power supply while the power is on.
.... leave the battery pack attached when the
camcorder is not in use.
•Moisture on the head drum can cause severe
damage to the video tape, and can lead to internal
damage to the camcorder itself.
Serious malfunctioning
2. Avoid using the unit . . .
.... in places subject to excessive humidity or
dust.
If malfunctioning occurs, stop using the unit
immediately and consult your local JVC dealer.
.... in places subject to soot or steam such as
near a cooking stove.
.... in places subject to excessive shock or
vibration.
For Your Maintenance
1. After Use
.... near a television set.
1 Set the power switch to POWER OFF to turn
.... near appliances generating strong magnetic
or electric fields (speakers, broadcasting
antennas, etc.).
.... in places subject to extremely high (over
40°C) or extremely low (under 0°C)
temperatures.
off the camcorder.
2 Slide EJECT to open the cassette holder, then
remove the cassette.
3 Close and lock the cassette holder by pressing
PUSH.
4 Press BATT. RELEASE to remove the battery
pack.
3. DO NOT leave the unit . . .
.... in places of over 50°C.
5 Slide the LENS COVER open/close switch to
.... in places where humidity is extremely low
(below 35%) or extremely high (above 80%).
.... in direct sunlight.
.... in a closed car in summer.
.... near a heater.
close the lens cover.
2. Cleaning The Camcorder
1 CLEAN EXTERIOR
Wipe gently with a soft cloth.
2 CLEAN LENS
4. To protect the unit, DO NOT . . .
.... allow it to become wet.
Blow it with a blower brush, then wipe gently
with lens cleaning paper.
.... drop the unit or strike it against hard objects.
.... subject it to shock or excessive vibration
during transportation.
.... keep the lens directed at extremely bright
objects for long periods.
.... direct the eyepiece of the viewfinder at the
sun.
.... carry it by holding the viewfinder.
.... swing it excessively when using the shoulder
strap.
3 REMOVE EYEPIECE
Turn the eyepiece counterclockwise and pull
it out.
4 CLEAN VIEWFINDER
Remove dust using a blower brush.
5 RE-ATTACH EYEPIECE
Align the marks, re-attach the eyepiece and
turn it clockwise.
NOTES:
5. This camcorder features a built-in head
cleaner which automatically cleans the
heads and head drum when a cassette is
loaded or unloaded. If, however, the heads
become dirty and cause blurriness or
interruption in the playback picture,
consult your nearest JVC dealer.
● Avoid using strong cleaning agents such as
benzine or alcohol.
● Cleaning should be done only after the battery
pack has been removed or other power units have
been disconnected.
● Mold may form if the lens is left dirty.
SPECIFICATIONS
GENERAL
EN
45
AC POWER ADAPTER/BATTERY CHARGER
(AA-V11EG)
Format
: VHS PAL standard
Power source
Power consumption
GR-AX470 light on
GR-AX470 light off/
GR-AX270
: DC 6 V
Power requirement
: AC 110 to 240 V`,
50/60 Hz
: 8.3 W
Power consumption
Output
: 23 W
: DC 8.5 V
(CHARGE),
DC 6.3 V
(VTR)
, 1.3 A
, 1.8 A
: 5.3 W
: PAL-type
Signal system
Video recording system
Luminance
: FM recording
: Converted sub-carrier
direct recording
Conforms to VHS
standard
Charging system
: Constant current, peak
detection, timer
controlled
: 150 (W) x 42 (H) x
68 (D) mm
Colour
Dimensions
Weight
Cassette
Tape speed
SP
LP
:
cassette
: Approx. 350 g
: 23.39 mm/sec
: 11.70 mm/sec
CASSETTE ADAPTER (C-P7U)
Dimensions
: 188 (W) x 25 (H) x
Recording time Max.
SP
104 (D) mm
: Approx. 240 g
: 60 minutes
Weight
Accessory
(with EC-60 cassette)
: 120 minutes
: “R6 (AA)”-size battery x 1
LP
(with EC-60 cassette)
Provided Accessories ......................੬ pg. 3
Operating temperature : 0°C to +40°C
Operating humidity
Storage temperature
Weight
GR-AX470
GR-AX270
Dimensions
GR-AX470/AX270
: 35% to 80%
: –20°C to +50°C
Optional Accessories
•Battery Packs BN-V12U, BN-V22U, BN-V25U
•Car Battery Charger BH-V3E
•Battery Charger BH-VC10EG
•Car Battery Cord AP-V7E
•Compact VHS-C Cassettes EC-60/45/30
•Active Carrying Bag CB-V7U
•Wireless Remote Control Unit RM-V704U or
RM-V700U
: Approx. 825 g
: Approx. 820 g
: 112 (W) x 112 (H) x
229 (D) mm
CAMERA
Pick up
Lens
: 1/4” format CCD
: F1.6, f = 3.8 to 68.4 mm,
18:1 power zoom lens
with auto iris and macro
control, filter diameter
46 mm
* Some acccessories are not available in some
areas. Please consult your nearest JVC dealer for
details on accessories and their availability.
Specifications shown are for SP mode unless
otherwise indicated. E. & O. E. Design and
specifications subject to change without notice.
Viewfinder
: Electronic viewfinder
with 0.5” B/W CRT
White balance
adjustment
: Auto/Manual adjustment
VIDEO
Output
: 1 Vp-p, 75 ohms,
unbalanced (via VIDEO
out connector)
AUDIO
Output
: –8 dBs, 1 k-ohm
(via AUDIO out
connector)
MEMO
MEMO
EN
VICTOR COMPANY OF JAPAN, LIMITED
0P2ri9n7teTdOiVn*JaUpNa*n VP
EE
COPYRIGHT© 1997 VICTOR COMPANY OF JAPAN, LTD.
|