98067/98756/98046
MiniCam™ Pro
User’s Manual
For technical support contact Jasco Products at 1-800-654-8483
System Requirements
1. Operating System - Microsoft® Windows® 2000, XP and Vista
2. CD drive
3. USB port
Maintenance Care and Storage
1. Do not use or store the camera in high humidity and extreme
high/low temperature.
2. Do not touch the lens with your fingers.
3. Do not drop the camera or get the camera wet.
4. Do not try to repair the camera.
5. To clean the camera, use a dry cloth. Do not use organic solvents,
such as alcohol etc. to clean the camera.
6. Store the camera in a dry and clean place
Contents
1. MiniCam™ Pro with stand and clip
2. CD with driver and software application
3. Instruction manual
3
Getting to Know Your MiniCam™ Pro
Snap Shot Button
Microphone
Note: You must install
the camera driver
BEFORE connecting
the camera to your
computer.
Focus Ring
Lens
Camera Stand
Installation
Please note that you must install the camera drivers BEFORE you connect the
camera to the USB port of your computer.
1. You must install all relevant updates, service packs, and patches for
your operating system. These are available on Microsoft’s® website under
“Resources”. Use the “Windows Update” link. (www.microsoft.com).
2. Insert the included MiniCam™ Pro CD into the CD Rom Drive.
(The CD should auto load).
3. If CD does not auto load, follow these steps:
a. Double click on My Computer
b. Double click on the CD icon on the CD drive
c. Double click on setup.exe
4
4. The installation menu will come up. Select MiniCam™ Pro Driver.
5. Select Next on the Welcome screen.
6. Under Setup Type select Complete, and then Next to continue.
7. Select Install to begin copying the driver files to your computer.
8. On the final screen, select Finish.
9. It may be necessary to have your Windows installation disk available to
install any additional windows drivers onto your computer. You will
receive a prompt if this is necessary.
10. (Optional) On the installation menu, select ArcSoft Software Suite.
Follow the on screen instructions to install ArcSoft VideoImpression™
and/or ArcSoft PhotoImpression™. DirectX® may install as well. Please
follow the instructions to complete the installation. You may need to
reboot your computer.
11. (Optional) Select User’s Manauls to open a PDF version of the
Instruction Manual in both English and Spanish. You will need Adobe
Reader to open the user’s manuals.
12. (Optional) To download Adobe® Reader® select Adobe Reader 7.0
and follow the instruction instructions. You may need to reboot your
computer.
13. When you have installed the driver, and all of the optional software
you want to install, select Exit.
14. Remove the warning label from the USB plug of your MiniCam™ Pro.
15. After your computer reboots, plug your MiniCam™ Pro’s USB plug into
the USB plug of your computer.
16. Open ArcSoft VideoImpression™ or ArcSoft PhotoImpresssion™ and
follow the instructions to begin using your MiniCam™ Pro camera. Enjoy!
5
PhotoImpression™ - Welcome to PhotoImpression
ArcSoft PhotoImpression™
is an easy-to-use image-
editing program specifically
designed for general
consumers. The program
enables you to edit, retouch,
enhance or add special effects
to digital images with point-
and-click simplicity. It also
offers a great variety of project
templates for creating greeting
cards and calendars, plus the
functionalities of the popular Arcsoft PhotoPrinter® and
Funhouse™ programs.
ArcSoft PhotoImpression™ is an all-inclusive application designed specifically
for novice users. It combines photo editing with additional creative and
printing tools that maximize your digital imaging experience.
Features include:
•
•
•
•
•
•
•
•
•
Create dynamic images
Editable text
Instantly remove red-eye
Special effects and enhancements/Intuitive resize options
Photo fun
Choose from a wide variety of frames, brush stroke edges and shapes
Multiple, advanced printing options--now with PIM!
Desktop interaction
Works great with digital cameras and scanners
6
To Open ArcSoft PhotoImpression™
1. Double click on the ArcSoft PhotoImpression™ icon on the desktop.
2. You may also go to ArcSoft under Programs in the Start Menu, and
click on Photo Impression.
Using Photo Impression
1. Click on “Camera/Scanner”.
See picture below.
2. Select “GE MiniCamPro”.
3. The new window will allow
you to capture your pictures.
Edit Captured Pictures
1. After you have captured
pictures, you’re ready to edit
them. To get started select
a picture from the ones you
captured.
2. Your picture will open in the
main window. See Diagram.
3. Click on the Enhance,
Create, Project, Save or
Print button on the left.
See Diagram.
7
4. The associated menus are located on the bottom of the screen.
Scroll through those to find what you need. See Diagram. Have fun!
If you need more help, click on “Help” in the upper left-hand corner of the
tance, patches, free card and calendar templates and other fun stuff.
Video Impression™
ArcSoft Video Impression™ is a powerful, easy-to-use video editing and
presentation program designed for consumers. ArcSoft Video Impression™
enables you to edit video clips and still images, and to combine them to
create multimedia desktop video presentations for home, business,
and the Internet.
ArcSoft Video Impression™ is your ticket to cool home movies and slide
shows. If you know how to drag-and-drop with your mouse, you’re all set!
In no time you can combine still images, video clips, audio tracks, text, and
special effects into your very own movie. Make a VCD and play your movie
on your DVD player!
8
Working with Video Impression™
•
•
•
•
•
•
•
•
Getting Started
Working with Albums
Working with the Storyboard
Editing Images
Editing Video
Editing Audio
Printing a Still Image from a Video
Saving a Movie
ArcSoft Video Impression™ - Getting Started
1. Open ArcSoft Video Impression™
A) Double click on the Video Impression icon on your desktop.
B) You may also go to ArcSoft under Programs in the Start Menu, and
click on Video Impression
2. Click on “Create a New Video.”
3. Click on the icon: “Capture From Device.”
4. You should be viewing live video now. If not click on the eye icon to
start viewing live video.
5. When you’re ready to record, click the record button ( ).
6. Use the pause button ( ) to stop recording.
7. The play button ( ) will play back your video.
8. If you want to save what you have recorded, click the album icon to
the right of “Album”.
9
If you need more help, click on “Help” in the upper left-hand corner of the
screen.
Note: If you are trying to send a video clip by email, your email provider may
have a size limitation.
patches, templates and other fun stuff.
MSN® Messenger
Installing/Opening MSN® Messenger
A. Windows® 98/ME/2000
• After it has downloaded, you can open MSN® Messenger by going to
Start
Programs
Windows Messenger.
B. Windows® XP/Vista
• MSN® Messenger is already installed
• Open MSN® Messenger by going to Start
Messenger.
Programs
Windows
10
Using MSN® Messenger with your camera
1. Make sure the MiniCam™ Pro driver has been installed.
2. Plug the camera into any USB port on your computer.
3. Open MSN® Messenger using the instructions above.
4. To start a video conference
a. In Windows® 98/ME/2000 click on NetMeeting.
b. In Windows® XP/Vista click on Actions
Start a Video Conversation.
Note 1: In order to chat and share video with a friend, you will need to add
your friend to your contact list. Your friend will also need to use MSN®
Note 2: Windows® XP & Vista users may be asked to add a .NET Passport to
your user account. Follow the instructions.
If you need more help, click on ”Help” in the upper right-hand corner of
technical assistance
Troubleshooting
1. Camera will not turn on
• Make sure the camera is plugged into the USB port correctly
• Make sure your USB port is functioning properly. You may need to
install updates, service packs, or patches for your operating system
from Microsoft’s® website, www.microsoft.com. Go to “Windows
Update” under Resources.
2. Uninstall the MiniCam™ Pro driver
• Close all open applications.
11
• Go to the Start Menu
(Settings in some operating systems)
Control Panel
Add/Remove Programs
• Select “MiniCamPro”
• Select “Remove”, then “OK” to uninstall the driver.
• Select “Yes, I want to restart my computer”, then “Finish”.
• Your computer will now reboot.
3. “Can’t detect camera”, “Can’t find VFW driver”, or “Can’t find camera
driver” errors
• Close all open applications.
• Unplug the MiniCam™ Pro from your computer.
• Uninstall the MiniCam™ Pro software according to the directions above,
then reboot your computer.
• Re-install the MiniCam™ Pro driver according to the installation
directions, then reboot your computer.
• Plug in your MiniCam™ Pro.
4. Problems with Photo Impression™ or Video Impression™
5. Problems with MSN™ Messenger
**Microsoft and Arcsoft may update their software at any time.
1ꢀ
TWO YEAR LIMITED WARRANTY
Jasco Products Company warrants this product to be free from manufac-
turing defects for a period of two years from the original date of consumer
purchase. This warranty is limited to the repair or replacement of this
product only and does not extend to consequential or incidental damage to
other products that may be used with this unit. This warranty is in lieu of all
other warranties express or implied. Some states do not allow limitations
on how long an implied warranty lasts or permit the exclusion or limitation
of incidental or consequential damages, so the above limitations may not
apply to you. This warranty gives you specific rights, and you may also have
other rights which vary from state to state. If unit should prove defective
within the warranty period, return prepaid with dated proof of purchase to:
Jasco Products Company
10 E. Memorial
Oklahoma City, OK 73114
FCC Statement
Notice: Federal Communications Commission (FCC) requirements, Part 15
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
13
•
•
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes of modifications not expressly approved by the
grantee of this device could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Distributed for GE
by Jasco Products Company
10 E. Memorial, Oklahoma City, OK 73114
|