Canon DC301 User Manual

PUB. DIE-304

DVD Camcorder

Instruction Manual

PAL

How to Select a DVD Disc

There are many types of DVD discs but this camcorder uses only the following three

types of 8 cm mini DVD discs: DVD-R, DVD-R DL and DVD-RW. Read the differences

between them and select the disc that best fits your needs.

DVD-R

Best for Compatibility

DVD-Rs can be recorded only once – you cannot edit or delete the recordings. On the

other hand, these discs are comparatively cheaper.

DVD-R DL

Best for Recording Time

Dual-layered discs allow writing up to 80% more data (approx. 2.6 GB) on a single

recording side. However, you cannot edit or delete the recordings.

Dual-layered discs have two recording layers. The

Layer 2

Layer 1

Scene 2

Scene 1

Recording surface

camcorder will record on layer 1 and then continue to

layer 2. During the playback of a recording spanning

both layers, you may notice a brief stop (about 1

second) at the point where the camcorder switches to

the second layer. The switch to layer 2 will break the

recording into 2 separate scenes.

DVD-RW

Best for Reusability

Recordings made on a DVD-RW disc can be edited or deleted. Also, the disc can be

initialized. Initializing a DVD-RW disc clears all the recordings and restores the free

space on the disc to its initial value so you can use the same disc again.

Disc specification on DVD-RWs

DVD-RW discs can be recorded using either one of two disc specifications: VIDEO mode

or VR mode. When you first insert a brand new DVD-RW disc, the camcorder will

automatically display the initialization screen where you can select the disc specification

for the disc.

VIDEO mode: Once finalized, discs recorded in VIDEO mode can be played back in most

common DVD players offering the best compatibility. However, recordings cannot be

edited (deleted, rearranged, etc.).

VR mode: You can easily edit the recordings. However, discs recorded in VR mode can

only be played back with DVD players compatible with DVD-RWs in VR mode.

Note: DVD-R and DVD-R DL discs can only be recorded in VIDEO mode.

Advantages of Using DVDs

No need to worry about recording over a tape.

When you use a DVD, the camcorder will automatically record on the empty

space of the disc. So you don't have to worry about mistakenly recording over a

precious memory.

Just select a scene from the index screen.

You don't need to bother running a tape forwards and backwards to find the

scene you want to play back. Simply select a scene from the index screen and

start the playback in a breeze.

Easily play back your recordings on a DVD player.

After your finalize your DVD (

45), you can play it on a DVD player and share

your recordings with friends and family.

Playback on external devices

Make sure to finalize discs (

45) before you play them back on external

DVD devices. The disc's type will affect its compatibility with external devices.

For a summary, you can refer to the sidebar on page 46. However, to be sure,

always refer to the instruction manual of the external device and make sure it

is compatible before inserting the disc.

For the highest compatibility with external DVD devices we recommend

using VIDEO mode.

Discs that have been tested

The camcorder's performance was tested with single-layered discs using

Hitachi-Maxell HG series DVD discs; and with dual-layered discs using Canon

DVD-R DL54 discs and Verbatim DVD-R DL discs (as of January 2008*). For

further details, contact directly the manufacturer's customer support center.

Note that attempting to record or play with this camcorder DVD discs that

were recorded, initialized or finalized with other digital devices can result in

damage to the camcorder or in the permanent loss of the recordings.

* For the latest information, visit your local Canon Web site or contact your nearest

Canon office. The use of DVD-R DL discs that have not been tested by Canon may

result in incorrect recording/playback or in not being able to remove the disc.

Available features depend on the DVD disc used

Disc type

DVD-RW

VIDEO

DVD-R, DVD-R DL

Disc specifications

mode

Editing scenes with this camcorder (deleting

scenes, dividing scenes, etc.) ( 42)

–

Deleting a scene after recording it ( 31)

Initializing the disc in order to use it again for

recording ( 44)

Giving a title to the disc ( 44)

Finalizing the disc in order to play it with an external

DVD device ( 45)

Adding recordings to a disc already finalized

–

(

46)

Only scenes in the playlist can be divided.

Disc finalization is the processing of the free space (the unrecorded area) on the disc in

order to make it playable on external DVD devices ( 45). Playback cannot be

guaranteed with all external DVD devices. To finalize a DVD-R DL disc, the camcorder has

to process both layers. Therefore, and depending on the amount of free space on the disc,

this process may be lengthy.

You will need to unfinalize the disc first.

Table of contents

Introduction ____________________________________

How to Select a DVD Disc

Advantages of Using DVDs

About this Manual

10 Getting to Know the Camcorder

Supplied Accessories

Components Guide

Screen Displays

Preparations ____________________________________

16 Getting Started

Charging the Battery Pack

Preparing the Accessories

18 Basic Operation of the Camcorder

Power Switch

Operating Modes

Joystick and Joystick Guide

Using the Menus

21 First Time Settings

Setting the Date and Time

Changing the Language

Changing the Time Zone

22 Getting Ready to Start Recording

Opening the Lens Cover and Adjusting the LCD screen

Inserting and Removing a Disc

Inserting and Removing a Memory Card

Video _________________________________________

26 Basic Recording

Shooting Video

Selecting the Recording Mode

Zooming: Optical, Advanced and Digital Zoom

Quick Start Function

Reviewing and Deleting the Last Scene Recorded

6 • Table of contents

31 Basic Playback

Playing Back the Video

Deleting Scenes

On-Screen Displays (Data Code)

34 Additional Functions

: Special Scene Recording Programs

Flexible Recording: Changing the Shutter Speed

LCD Video Light

Self Timer

Manual Focus Adjustment

Manual Exposure Adjustment

White Balance

Image Effects

Digital Effects

42 Managing Scenes and the Disc

Creating a Playlist

Moving Scenes in the Playlist

Dividing Scenes

Initializing the Disc

44 Disc Playback on an External Device

Changing the Disc Title

Finalizing the Disc

Disc Playback on External Devices

Unfinalizing the Disc - Additional Recordings on a Finalized Disc

Photos ________________________________________

48 Basic Recording

Taking Photos

Selecting Photo Size and Quality

Erasing the Last Photo Just Recorded

50 Basic Playback

Viewing Photos

Magnifying Photos during Playback

Erasing Photos

53 Additional Functions

Continuous Shooting and Exposure Bracketing (Drive

Mode)

Automatic Focus Priority

Histogram and Other Screen Displays

Protecting Photos

Initializing the Memory Card

Table of contents • 7

57 Printing Photos

Printing Photos

Print Orders

External Connections _____________________________

58 Connecting to a TV or VCR

Connection Diagrams

Playback on a TV Screen

Copying your Recordings to an External Video Recorder

Additional Information ____________________________

60 Appendix: Menu Options Lists

FUNC. Menu

Setup menus

Camera Setup (Advanced Zoom, Image Stabilizer, etc.)

Disc Operations (Initialization, Finalization etc.)

Still Image Operations (Card Initialization, etc.)

Display Setup (LCD Brightness, Language, etc.)

System Setup (Volume, Beep, etc.)

Date/Time Setup

67 Trouble?

Troubleshooting

List of Messages

73 Do’s and Don’ts

Handling Precautions

Using the Camcorder Abroad

78 General Information

System Diagram

Optional Accessories

Specifications

Index

8 • Table of contents

About this Manual

Thank you for purchasing the Canon DC320/DC311/DC310/DC301. Please read this

manual carefully before you use the camcorder and retain it for future reference.

Should your camcorder fail to operate correctly, refer to Troubleshooting (

67).

Conventions Used in this Manual

•

IMPORTANT: Precautions related to the camcorder’s operation.

NOTES: Additional topics that complement the basic operating procedures.

POINTS TO CHECK: Restrictions that apply if the function described is not

available in all operating modes (the operating mode to which the camcorder

should be set, the type of disc required, etc.).

•

: Reference page number.

: Text that applies only to the model(s) shown in the icon.

• The following terms are used in this manual:

“Screen” refers to the LCD and the viewfinder screen.

“Scene” refers to one movie unit from the point you press

recording until you press again to pause the recording.

Start/Stop

to start

The terms “photo” and “still image” are used interchangeably with the same

meaning.

• The photos included in this manual are simulated pictures taken with a still camera.

• Note that unless indicated otherwise, screenshots and illustrations in this manual

refer to the

model.

Changing the Language

Options

Default value

[

]

[MAGYAR]

[

]

Buttons and switches to be operated

[DEUTSCH] [MELAYU]

[

]

[POLSKI]

]

ROMANA

[ENGLISH]

[

]

[ESPAÑOL] [TÜRKÇE]

]

Names of buttons and switches other than the joystick

are indicated within a “button” frame.

[FRANÇAIS]

[ITALIANO]

[

]

For example

FUNC.

(

29)

FUNC.

[

]

Brackets [ ] and capital letters are used to refer to menu

options as they are displayed on screen. In menu option

lists and option tables the default value is shown in

boldface.

DISPLAY SETUP]

[LANGUAGE

Desired language

FUNC.

]

For example [ON], [OFF].

Introduction • 9

Getting to Know the Camcorder

Supplied Accessories

CA-570 Compact Power

Adapter (incl. power cord)

NB-2LH Battery Pack

STV-250N Stereo Video

Cable

Yellow • Red • White plugs

10 • Introduction

Components Guide

Lens cover switch (

26, 48)

Left side view

(

open,

closed)

AV terminal (

58)

CARD access indicator (

Speaker

48)

switch (

Lock button

18)

DISC access indicator (

CHARGE indicator (

26) /

16)

Mode switch (

27)

Easy recording

Recording programs

Disc compartment cover (

23)

Grip belt (

17)

Strap mount (

81)

Right side view

Stereo microphone

Names of buttons and switches other than the

joystick are indicated within a “button” frame

FUNC.

(for example

Front view

Introduction • 11

Joystick (

18)

Back view

FUNC. button (

DISP. button (

19, 60)

33, 55)

Dioptric adjustment lever (

Viewfinder ( 27)

QUICK START button and standby lamp

29)

27)

(

PLAY mode indicator (green) (

CAMERA mode indicator (red) (

18)

OPEN (disc cover) switch (

23)

Start/Stop button (

DC IN terminal (

Serial number/

26)

17)

Top view

Battery attachment unit (

16)

RESET button (

LCD screen (

Zoom lever (

67)

22)

28)

(movies/still images) switch

(

18)

Tripod socket (

17)

Memory card slot

(open the cover to access) (

)

BATT. (battery release) switch (

16)

Names of buttons and switches other than the

joystick are indicated within a “button” frame

FUNC.

(for example

Bottom view

12 • Introduction

Screen Displays

Recording movies

Operating mode (

Disc specification (

18) /

Recording program (

34, 36)

White balance (

39)

40)

37)

41)

28)

DVD-R,

DVD-RW ( 3)

Finalized disc mark (

Image effect (

LCD video light (

Digital effects (

Recording mode (

Disc type

DVD-R DL,

45)

Manual focus (

Image stabilizer (

Disc operation

38)

62)

Playing movies

(during playback)

Time code/Playback time

(hours : minutes : seconds)

Remaining recording time on the disc

Remaining battery charge (

15)

Wind screen off (

62)

Recording reminder

Level marker (

Scene number

Joystick guide (

64)

18)

Data code (

33)

Introduction • 13

Recording still images

Zoom (

28), Exposure

(

39)

Recording program (

34, 36)

White balance (

Image effect (

39)

40)

37)

41)

LCD video light (

Digital effects (

Drive mode (

53)

49)

Still image quality/size (

Manual focus (

38)

Number of still images available on the

memory card

Viewing still images

Self timer (

AF frame (

37)

54)

Joystick guide (

Focus/exposure automatically set and

locked ( 48)

Camcorder shake warning (

Image number ( 15)

Current image / Total number of images

Histogram ( 55)

18)

62)

Date and time of recording

Image protection mark (

55)

Manual exposure (

39)

Image size (

File size

49)

Aperture value (

Shutter speed (

36)

14 • Introduction

Disc operation

Record,

Number of still images available on the card

displayed in red: No card

Record pause,

Playback,

Fast playback,

Fast reverse playback,

Slow playback,

Slow reverse playback

Playback pause,

in green: 6 or more images

in yellow: 1 to 5 images

in red: No more images can be recorded

• When viewing the still images, the display will

always be in green.

• Depending on the recording conditions, the

number of available still images displayed may

not decrease even after a recording has been

made, or may decrease by 2 still images at

once.

Remaining recording time

When there is no more disc space available,

END” will be displayed and the recording

will stop.

“

Remaining battery charge estimate

Card access display

is displayed next to the number of images

available while the camcorder is writing on the

memory card.

• When

is displayed in red, replace the

battery pack with a fully charged one.

• When you attach an empty battery pack, the

Image number

The image number indicates the name and

location of the file on the memory card. For

example, the file name of image 101-0107 is

“IMG_0107.JPG”, stored under the folder

“DCIM\101CANON”.

power may turn off without displaying

• Depending on the conditions under which the

camcorder and the battery pack are used, the

actual battery charge may not be indicated

accurately.

Recording reminder

The camcorder counts from 1 to 10 seconds

when you start recording. This is helpful to avoid

scenes that are too short.

Introduction • 15

Preparations

This chapter describes basic operations, such as navigating the

menus, and first time settings to help you learn more about your

camcorder.

Getting Started

CHARGE

indicator

Getting Started

DC IN terminal

Charging the Battery Pack

The camcorder can be powered with a

battery pack or directly using the

compact power adapter. Charge the

battery pack before use.

For approximate charging times and

recording/playback times with a full

battery pack, refer to the tables on

page 79.

3 Connect the power cord to the

compact power adapter.

4 Plug the power cord into a power

outlet.

5 Connect the compact power

adapter to the camcorder’s DC IN

terminal.

• The CHARGE indicator starts

flashing. The indicator will stay on

when the charging is completed.

• You can also use the compact

power adapter without attaching a

battery pack.

BATT. switch

1 Turn off the camcorder.

2 Attach the battery pack to the

camcorder.

• When the compact power adapter

is connected, the power of the

battery pack will not be consumed.

Press the battery pack lightly and

slide it up until it clicks.

16 • Preparations

NOTES

ONCE THE BATTERY PACK IS FULLY CHARGED

• The CHARGE indicator also serves as a

rough estimate of the charge status.

Continuously on: Battery pack fully

charged.

Two quick flashes at 1-second intervals:

Battery pack at least 50% charged. If

the indicator flashes quickly but not

exactly in this pattern, refer to

1 Disconnect the compact power

adapter from the camcorder.

2 Unplug the power cord from the

power outlet and the compact

power adapter.

TO REMOVE THE BATTERY PACK

Troubleshooting (

One flash at 1-second intervals: Battery

pack less than 50% charged.

• We recommend that you prepare battery

packs to last 2 to 3 times longer than

you think you might need.

67).

BATT.

Press

to release the battery

pack. Slide the battery pack down

and then pull it out.

IMPORTANT

Preparing the Accessories

• Turn off the camcorder before

connecting or disconnecting the

compact power adapter. After you turn

the

switch to

, important file

allocation data is updated on the disc.

Be sure to wait until the PLAY and

CAMERA mode indicators are

completely off.

• You may hear some noise from the

compact power adapter during use.

This is not a malfunction.

• We recommend charging the battery

pack in temperatures between 10 °C

and 30 °C. Outside the temperature

range of 0 °C to 40 °C, the charging will

not start.

• Do not connect to the camcorder’s DC

IN terminal or to the compact power

adapter any electrical equipment that is

not expressly recommended for use

with this camcorder.

Fasten the grip belt.

Adjust the grip belt so that you can

reach the zoom lever with your index

finger, and the

your thumb.

button with

Start/Stop

WHEN YOU MOUNT THE CAMCORDER ON A

TRIPOD

• To prevent equipment breakdowns and

excessive heating, do not connect the

supplied compact power adapter to

voltage converters for overseas travels

or special power sources such as those

on aircraft and ships, DC-AC inverters,

etc.

Do not leave the viewfinder

exposed to direct sunlight

as it may melt (due to

concentration of the light by

the lens). Do not use tripods

with fastening screws

longer than 5.5 mm. Doing

so may damage the camcorder.

Preparations • 17

Basic Operation of the Camcorder

Operating Modes

Basic Operation of the

Camcorder

The camcorder’s operating mode is

determined by the

switch and the

position of the

manual,

switch. In this

Power Switch

indicates that a function is

available in the operating mode shown and

indicates that the function is not

available. When no operating mode icons

are given, the function is available in all

operating modes.

Lock button

In addition to turning the camcorder on

Joystick and Joystick Guide

and off, the

switch also toggles the

camcorder’s operating mode.

To turn on the camcorder: Hold the lock

button pressed down and turn the

switch to ON.

Use the joystick to operate the

camcorder's menus.

Push the joystick up, down, left or right

(

) to select an item or change

To change the operating mode: From the ON

settings.

position, turn the

switch

momentarily toward MODE and release it.

This action will toggle the operating mode

between recording (CAMERA - red

indicator) and playback (PLAY - green

indicator).

Press the joystick itself (

) to save the

settings or confirm an action. On menu

screens, this is indicated by the icon

Operatingmode

indicator

Operating mode

Icon display

Operation

switch

Recording movies

on a disc

(movies)

Recording still

images on a

memory card

(Red)

(still images)

Playing movies

from a disc

(movies)

Viewing still images

from a memory card

(Green)

(still images)

18 • Preparations

The functions assigned to the joystick

change according to the operation

mode and the camcorder’s settings.

Selecting a FUNC. Menu Option

Press

to display/hide the joystick

guide (when recording, the joystick

guide will appear only when the mode

switch is set to ). In the illustrations

of this manual, positions other than

those relevant to the function explained

are marked with a striped pattern.

Depending on the operating mode,

these positions may be empty or show a

different icon than the one on the

illustration.

When the guide contains multiple

“pages”, [NEXT] and the page number

icon ( ) will appear at the bottom

position. Push the joystick ( ) toward

[NEXT] to display the next “page” of the

guide.

FUNC.

1 Press

2 Select (

) the icon of the

function you want change from the

Using the Menus

left side column.

Menu items not available will appear

grayed out.

Many of the camcorder’s functions can

be adjusted from the menus that open

after pressing the FUNC. button

FUNC.

3 Select ( ) the desired setting

from the available options at the

bottom bar.

(

For details about the available menu

• The selected option will be

highlighted in light blue. Menu

items not available will appear

grayed out.

options and settings, refer to the Menu

Options Lists (

60).

• With some settings, you will need

to make further selections and/or

press

. Follow the additional

operation guides that will appear

on the screen (such as the

icon, small arrows, etc.).

FUNC.

4 Press

to save the settings

and close the menu.

Preparations • 19

FUNC.

You can press

menu at any time.

to close the

4 Select (

) the setting you want to

change and press

• The orange selection bar indicates

the menu setting currently selected.

Items not available appear in black.

• Push the joystick ( ) to return to

the menu selection screen (step 3).

Selecting an Option from the Setup Menus

5 Select (

) the desired option and

to save the setting.

press

FUNC.

6 Press

FUNC.

You can press

menu at any time.

to close the

Abbreviation of Menu Selections in this

Manual

In this manual, the

arrow is used to

abbreviate menu selections. Below is an

example of changing a setting using the

setup menus.

FUNC.

[

MENU]

DISPLAY SETUP]

[LANGUAGE

]

Desired language

FUNC.

1 Press

In the index screen (VIDEO mode)

and still image index screen, the

setup menus will open. Skip to

step 3.

For selections in the FUNC. menu, the

abbreviated form will always show the

initial default value. In recording mode,

its icon will appear on the left side

column when you first open the menu. If

the setting was changed, the icon of the

currently selected option will appear

instead.

2 Select (

) the

icon and press

to open the setup menus.

FUNC.

• You can also hold

pressed

down for more than 1 second to

open directly the setup menus

screen.

FUNC.

• In the index screen (DVD-RW discs

in VR mode), push the joystick

[

IMAGE EFFECT OFF]

Desired image effect

(

) to select the

icon.

FUNC.

3 Select (

) the desired menu from

the left side column and press

The title of the selected menu

appears on top of the screen and

under it the list of settings.

20 • Preparations

First Time Settings

(for example, [1.JAN.2008 12:00 AM]).

First Time Settings

You can change the date format (

• You can also change the date and time

later on (not during the initial setup). To

open the [DATE/TIME] screen, press

FUNC.

66).

and select

[DATE/TIME

Setting the Date and Time

SETUP]

[DATE/TIME].

You will need to set the date and time of

the camcorder before you can start

using it. The [DATE/TIME] screen will

appear automatically when the

Changing the Language

Options

Default value

camcorder’s clock is not set.

[

]

[MAGYAR]

[

]

[DEUTSCH] [MELAYU]

]

[

]

[POLSKI]

]

ROMANA

[ENGLISH]

[

]

[ESPAÑOL] [TÜRKÇE]

]

[FRANÇAIS]

[ITALIANO]

[

]

When the [DATE/TIME] screen appears,

the year will be displayed in orange and

indicated with up/down arrows.

]

FUNC.

1 Change (

) the year and move

) to the month.

(

20)

(

FUNC.

2 Change the rest of the fields

(month, day, hour and minutes) in

the same way.

[

MENU]

DISPLAY SETUP]

[LANGUAGE

Desired language

]

3 Move ( ) the cursor to the [OK]

button and press

to start the

FUNC.

clock and close the menu.

IMPORTANT

NOTES

• If you changed the language by mistake,

• When you do not use the camcorder for

about 3 months, the built-in

follow the mark next to the menu

item to change the setting.

rechargeable lithium battery may

discharge completely and the date and

time setting may be lost. In such case,

recharge the built-in lithium battery

• The display

that appears in some

menu screens refers to the name of

buttons on the camcorder and will not

change, regardless of the language

selected.

(

75) and set the time zone, date and

time again.

• The date appears in a year-month-day

format only in the first setup screen. In

subsequent screen displays the date

and time will appear as day-month-year

Preparations • 21

Getting Ready to Start Recording

Changing the Time Zone

Getting Ready to Start

Recording

Change the time zone to match your

location. The default setting is Paris.

Opening the Lens Cover and Adjusting

the LCD screen

FUNC.

(

20)

Before you start recording, open the

lens cover.

FUNC.

[

MENU]

DATE/TIME SETUP]

[T.ZONE/DST]

Desired time zone*

FUNC.

* To adjust for daylight saving time, select the

area name marked with a

World Time Zones

Once you have set the time zone, date

and time, you do not need to reset the

clock every time you travel to another

time zone. Select the time zone to

match the local time at your destination,

referring to the date and time displayed

on the screen.

Move the lens cover switch down to

to open the lens cover.

Rotating the LCD Panel

Open the LCD panel 90 degrees.

You can rotate the panel 90 degrees

downward.

1 Open the date and time setup

screen.

FUNC.

[

MENU]

[

DATE/TIME SETUP]

[T.ZONE/DST]

180°

2 Move the orange selection frame

(

) to the

time zone.

3 Select (

) the area that

corresponds to the local time at

your destination and press

90°

You can rotate the panel 180 degrees

toward the lens (allowing the subject to

monitor the LCD screen while you use

the viewfinder). This is the only case

where you can use the viewfinder and

the LCD screen simultaneously.

• Refer to the changing date and

time displayed on the screen.

• To adjust for daylight saving time,

select the area name marked with a

FUNC.

4 Press

to close the menu.

Rotating the LCD panel 180 degrees

can be useful when you wish to include

22 • Preparations

yourself in the picture when recording

with the self timer.

NOTES

• This setting does not affect the

brightness of the recording.

• Using the bright setting will shorten the

effective usage time of the battery pack.

180°

Inserting and Removing a Disc

Subject can monitor the LCD screen

Use only 8 cm mini DVD discs marked

with the DVD-R

DVD-R DL) or the DVD-RW

Refer also to Discs that have been

tested ( 4).

Before inserting the disc be sure to

check that the recording surface is

clean. If necessary, use a soft lens-

cleaning cloth to remove any

logo (including

NOTES

logo.

About the LCD and viewfinder screen: The

screens are produced using extremely

high-precision manufacturing techniques,

with more than 99.99% of the pixels

operating to specification. Less than

0.01% of the pixels may occasionally

misfire or appear as black, red, blue or

green dots. This has no effect on the

recorded image and does not constitute a

malfunction.

fingerprints, dirt buildup or smudges

from the disc surface.

Inserting the Disc

LCD Backlight

(

18)

You can set the brightness of the LCD

screen to normal or bright.

Pick up lens

DISP.

Hold

pressed down for more

1 Turn the

switch to ON to

set the camcorder in

mode.

than 2 seconds.

Repeat this action to toggle between

the normal and bright settings.

OPEN

2 Slide

fully in the direction of

the arrow and gently open the disc

cover completely until it stops.

Preparations • 23

Retract the grip belt under the

camcorder so it will not get in the way

of the disc cover.

new DVD-RW disc is first inserted if the

switch is set to (movies). If

the disc is already initialized, you can

start recording movies once the record

3 Insert the disc and press its center

firmly until it clicks in place.

pause

indicator appears.

Otherwise, perform the following steps

to initialize the disc.

• Insert the disc with the recording

side facing down (single sided

discs – label side facing out).

• Be careful not to touch the

recording surface of the disc or the

pick up lens.

Select (

specification and press

) the desired disc

. For a

comparison between the VIDEO and

VR specifications, see How to Select

a DVD Disc (

A confirmation message will appear

on the screen. Select ( ) [YES] and

press to start the disc

3).

initialization, or select [NO] and press

to return and select a different

disc specification.

• The disc initialization will take

approximately one minute. Avoid

moving the camcorder while the

operation is in progress.

• You can start recording movies

once the record pause

4 Close the disc cover.

Do not force the cover closed if the

disc is not correctly inserted and

firmly set in place.

indicator appears.

Removing the Disc

NOTES

The process of recognizing a disc may take

a moment. The

display will move while

the disc is being read. Wait until the

camcorder finishes recognizing the disc

before you start recording.

WHEN USING DVD-R/DVD-R DL DISCS

You can start recording movies once the

OPEN

1 Slide

fully in the direction of

record pause

indicator appears.

the arrow and gently open the disc

cover completely until it stops.

• Do not subject the camcorder to

strong impacts while the DISC

access indicator is on or flashing.

WHEN USING DVD-RW DISCS

You need to initialize new discs before

you can start recording. The disc

initialization screen will appear when a

24 • Preparations

• Retract the grip belt under the

camcorder so it will not get in the

way of the disc cover.

2 Open the memory card slot cover.

3 Insert the memory card straight all

the way into the memory card slot.

• It may take a moment after sliding

4 Close the cover.

Do not force the cover closed if the

memory card is not correctly inserted.

OPEN

for the disc cover to open.

2 Grab the edge of the disc and

gently pull it out.

Be careful not to touch the recording

surface of the disc or the pick up

lens.

TO REMOVE THE MEMORY CARD

First push the memory card once

to release it, and then pull the card

out.

3 Close the disc cover.

IMPORTANT

OPEN

When you slide

after making a

IMPORTANT

recording, important file allocation data is

updated on the disc before the disc cover

opens. While the DISC access indicator is

on or flashing do not subject the

• Make sure to initialize all memory cards

before using them with this camcorder

(

56).

camcorder to shocks such as forcefully

laying it on a table.

• Memory cards have front and back

sides that are not interchangeable.

Inserting a memory card facing the

wrong direction can cause a malfunction

of the camcorder.

Inserting and Removing a Memory Card

NOTES

You can use commercially available

SDHC (SD High Capacity)

• Compatibility with all SD, SDHC or

MMC memory cards cannot be

guaranteed.

memory cards,

SD memory

cards or MultiMedia Cards (MMC) with

this camcorder.

• About SDHC Memory Cards: SDHC is the

new type of SD memory card with

capacities over 2 GB. Please note that

the specifications of SDHC memory

cards are different from those of regular

SD memory cards and you will not be

able to use memory cards of over 2 GB

with devices that do not support SDHC.

However, SDHC devices (including this

camcorder) are backward compatible

and support regular SD memory cards.

1 Turn off the camcorder.

Preparations • 25

Video

This chapter covers functions related to shooting and playing back

movies - from basic recording and zooming to more advanced manual

picture adjustments.

Basic Recording

The red CAMERA indicator will turn

on.

Basic Recording

3 Move the lens cover switch down

to open the lens cover.

Start/Stop

4 Press

to begin recording.

Shooting Video

• The recording starts; press

Start/Stop

again to pause the

recording.

Before You Begin Recording

• The DISC access indicator will flash

while recording and will stay on

briefly after pausing while the

scene is recorded on the disc.

Make a test recording first to check if

the camcorder operates correctly.

Since recordings made on a DVD-R or

DVD-R DL disc cannot be deleted, we

recommend you use a DVD-RW disc

to make the test recordings.

WHEN YOU HAVE FINISHED RECORDING

1 Make sure that the DISC access

indicator is off.

(

18)

2 Turn off the camcorder.

3 Close the lens cover and the LCD

panel.

4 Remove the disc.

IMPORTANT

• When recording movies, try to get a calm,

stable picture.

Excessive camcorder movement while

shooting and extensive use of fast

zooms and panning can result in jittery

scenes. In extreme cases, the playback

of such scenes may result in visually

induced motion sickness. If you

experience such a reaction, immediately

stop the playback and take a rest break

as necessary.

1 Move the

(movies).

switch to

switch to ON to set

2 Turn the

the camcorder in CAMERA mode.

26 • Video

• Observe the following precautions while

the DISC access indicator is on or

flashing. Failing to do so may result in

permanent data loss.

- Do not subject the camcorder to

vibrations or strong impacts.

- Do not open the disc cover and do not

remove the disc.

- Do not disconnect the power source or

turn off the camcorder.

Using the viewfinder

When recording in bright places it

may be difficult to use the LCD

screen. In such case, change the

brightness of the LCD screen (

or use the viewfinder instead. To use

the viewfinder, keep the LCD panel

closed*.

23)

- Do not change the operating mode.

NOTES

• About the recording time: By changing the

recording mode you can change the

recording time available on the disc

(

28).

• About the Power Save mode: To save power

when the camcorder is powered by a

battery pack, the camcorder will

Adjust the viewfinder as necessary

with the dioptric adjustment lever.

* The LCD screen and the viewfinder

can be used simultaneously when the

LCD panel is turned 180 degrees to

automatically shut off if left without any

operations for 5 minutes (

restore the power, turn the

65). To

switch

face the subject (

23).

toward MODE and release it, or turn the

switch to and back to ON

again.

• When recording in very loud places (such

as fireworks shows or concerts), sound

may become distorted or it may not be

recorded at the actual levels. This is not

a malfunction.

About the mode switch and recording programs

Set the mode switch to

to let the

camcorder adjust all the settings for you,

allowing you to just point the camcorder and

start shooting.

Set the mode switch to

The Special Scene recording programs (

to select one of the recording programs.

34) offer a convenient

way to select the optimal settings to match special recording

conditions. Conversely, with flexible recording programs (

36) you

can set the shutter speed you want, or enjoy the flexibility to change other

settings.

Video • 27

Selecting the Recording Mode

Zooming: Optical, Advanced and Digital

Zoom

Changing the recording mode will

change the recording time available on

the disc. Select XP or SP mode for

better movie quality; select LP mode for

longer recording times.

The camcorder offers three types of

zoom: optical, advanced and digital

zoom when recording movies. (In

mode only the optical zoom

The following table gives approximate

recording times with a brand new DVD

disc (on a single recording side).

is available.) You can also change the

zoom speed.

Selecting the Zoom Type

Default value

Disc type

Options

Default value

Recording mode

DVD-R,

DVD-R DL

DVD-RW

[OPTICAL] (37x,

32x)

The zoom range is limited to the optical

magnification ratio of the lens.

20 min.

30 min.

60 min.

36 min.

54 min.

108 min.

[ADVANCED] (Advanced Zoom)

In addition to the optical zoom range, the

camcorder processes the image digitally to

obtain a larger zoom range without any

deterioration in image quality. When recording

movies with a 16:9 aspect ratio, the field of view

(picture angle) will change. Refer to the table in

the NOTES section.

(

18)

FUNC.

19)

(

[DIGITAL] (2000x)

FUNC.

When this option is selected, the camcorder will

switch to digital zoom (light blue area on the

zoom indicator) when you zoom in beyond the

optical zoom range (white area on the zoom

indicator). With the digital zoom the image is

processed digitally so image quality will

deteriorate the more you zoom in.

[

STANDARD PLAY]

Desired recording mode

FUNC.

NOTES

The camcorder uses a variable bit rate

(VBR) when encoding the video data so the

actual recording times will vary depending

on the content of the scenes.

FUNC.

(

19)

FUNC.

[

MENU]

CAMERA SETUP]

[ZOOM TYPE]

Desired option

FUNC.

28 • Video

FUNC.

NOTES

[

MENU]

CAMERA SETUP]

• The zoom range of the advanced zoom

will change depending on the aspect

ratio of the scene (

[ZOOM SPEED]

Desired option

63).

•

The advanced

FUNC.

zoom cannot be selected if

[WIDESCREEN] is set to [

OFF].

NOTES

The fastest zoom speed can be achieved

[WIDESCREEN] set to [

ON] (16:9)

41x**,

with the [

VARIABLE] setting.

45x*,

36x**

Using the Zoom

* The picture angle will be wider at both full

telephoto and full wide-angle.

**The picture angle will be wider at full

wide-angle.

(

18)

[WIDESCREEN] set to [

OFF] (4:3)

46x,

Not

Zoom out

available

Selecting the Zoom Speed

Zoom in

(

18)

Move the zoom lever toward W to

zoom out (wide-angle). Move it

toward T to zoom in (telephoto).

Options

Default value

[

VARIABLE]

The variable zoom speed depends on how you

operate the zoom lever: Press gently for slower

zooms; press harder for faster zooms. With this

option, the zoom speed will be faster in record

pause mode.

NOTES

Keep at least 1 m to the subject. At full

wide-angle, you can focus on a subject as

close as 1 cm.

[

SPEED 1], [

SPEED 3]

SPEED 2],

Quick Start Function

Constant zoom speeds. [

SPEED 3] is the

fastest, and [

SPEED 1] is the slowest.

QUICK START

When you press

the

camcorder enters the

standby mode.

FUNC.

In standby mode the camcorder

consumes only about half the power

used when recording, saving energy

when you are using a battery pack.

Additionally, when you press

(

19)

Video • 29

QUICK START

shut-off with the [ STANDBY OFF]

setting ( 65).

To restore the power if the camcorder

shut off, turn the switch toward

again the camcorder is

ready to start recording within approx.

1 second*, ensuring you do not miss

important shooting opportunities.

MODE and release it, or turn the

camcorder off and then on again.

• If you perform any of the following

actions while in standby mode (while the

standby lamp is on), the camcorder will

be woken up from standby mode.

- Open the disc compartment cover.

* The exact time required until the camcorder

is ready to start recording may vary

depending on the shooting conditions.

(

18)

- Change the position of the

switch.

- Turn the

switch toward MODE.

Reviewing and Deleting the Last Scene

Recorded

Even in

mode you can play

QUICK START

1 Press

firmly.

back the last scene recorded in order to

check it. If you are using a DVD-RW

disc, you can also delete the scene

while reviewing it.

The standby lamp flashes at first

while the camcorder is preparing and

then stays on when it enters the

standby mode.

(

18)

2 When you wish to resume

QUICK START

recording, press

again.

Within approx. 1 second, the

camcorder is ready to record.

NOTES

1 If the joystick guide does not

appear on screen, press

display it.

• When you wake up the camcorder from

standby mode, the following settings will

be changed automatically:

- Manual focus returns to automatic

focus (AF).

guide, repeatedly push the joystick

) toward [NEXT] to display it.

does not appear on the joystick

(

- Manual exposure adjustment returns to

automatic exposure.

- Zoom position returns to full wide

angle W.

• The camcorder will shut off if left in

standby mode for 10 minutes, regardless

2 Push the joystick ( ) toward

• The camcorder plays back the last

scene (but without sound) and

returns to record pause mode.

• While reviewing the scene, select

the

icon and press

to return

of the [POWER SAVE] setting (

65).

to the recording mode.

You can select the length of time until

30 • Video

Basic Playback

Deleting a Scene After Recording It

POINTS TO CHECK

Basic Playback

Disc type:

DVD-RW

Playing Back the Video

After recording a scene:

1 Review the scene as described in

the previous section.

2 While reviewing the scene, select

(

18)

(

)

and press

3 Select ( ) [YES] and press

NOTES

• Avoid any other operations on the

camcorder while the scene is being

deleted.

• You will not be able to delete the last

scene if after the scene was recorded

you changed the operating mode, turned

off the camcorder or removed the disc.

1 Move the

(movies).

switch to

switch to ON, then

2 Turn the

turn it toward MODE and release it

to set the camcorder in PLAY

mode.

• The green PLAY indicator will turn

on.

• The scene index screen appears.

3 Move (

) the selection

frame to the scene you want to

play back.

4 Press

to begin the playback.

The playback will start from the scene

selected and continue until the end of

the last scene recorded.

Video • 31

TO PAUSE/STOP PLAYBACK

TO ADJUST THE VOLUME

5 If the joystick guide does not

During the playback of a scene:

appear on screen, press

display it.

6 Push the joystick ( ) toward

FUNC.

[

SPEAKER VOL.]

Adjust ( ) the volume

to pause the playback.

FUNC.

7 Push the joystick ( ) toward

stop the playback and return to the

scene index screen.

• The sound from the built-in speaker will

be muted when you close the LCD panel

or while the STV-250N Stereo Video

Cable is connected to the AV terminal.

• If you turn down the volume completely,

NOTES

• Depending on the recording conditions,

you may notice brief stops in video or

sound playback between scenes.

• This camcorder can play back discs

recorded with this camcorder. Discs

recorded with other camcorders or discs

created with a computer may not play

back correctly.

the icon will change to

• Be sure to finalize discs to play them

back on external DVD devices (

45).

Special playback modes

Use the joystick guide to enter the special playback modes. There is no sound

during the special playback modes.

Special playback mode

Fast playback

Initial mode

Camcorder operation

Normal playback Push the joystick ( ) toward

(

) toward

Perform operation again to increase playback

speed 5x → 15x the normal speed.

Slow playback

Playback pause Push the joystick ( ) toward

) toward

(

Perform operation again to increase playback

speed 1/8x → 1/4x the normal speed.

End special playback mode

Special playback Push the joystick ( ) toward

During some special playback modes, you may notice some anomalies (blocky

video artifacts, banding, etc.) in the playback picture.

32 • Video

Deleting Scenes

FUNC.

20)

(

If you are using a DVD-RW disc, you can

delete those scenes that you are not

interested in keeping.

FUNC.

[

MENU]

DISC OPERATIONS]

[DEL.ALL MOVIES]*

FUNC.

[YES]

Deleting a Single Scene

* When you are deleting the playlist, this

menu option will be replaced by

[DEL.PLAYLIST].

(

18)

POINTS TO CHECK

Disc type: DVD-RW • VR mode

IMPORTANT

Be careful when deleting original

recordings. Once deleted, an original

scene cannot be recovered.

From the original index screen, select

) the scene to delete. To

delete a scene only in the playlist,

(

switch to the playlist first (

then select the scene.

43), and

NOTES

• You may not be able to delete scenes

shorter than 5 seconds. To delete such

scenes you must initialize the disc

FUNC.

(

20)

(

44), in the process deleting all the

recordings on the disc.

FUNC.

• Do not change the position of the

[

DELETE]

[YES]

switch or the

switch while the

scene is being deleted (while the DISC

access indicator is on or flashing).

Deleting All Scenes

(

18)

On-Screen Displays (Data Code)

POINTS TO CHECK

The camcorder keeps a data code

Disc type:

DVD-RW • VR mode

containing the date and time and other

camera data (shutter speed, aperture,

etc.) registered at the time of recording.

You can select the data to be displayed.

For details about on-screen displays for

still images, refer to Histogram and

To delete all the scenes from the original

index screen, perform the following

procedure. This will delete also the

whole playlist. If you want to delete only

the playlist (without affecting the original

recordings), switch to the playlist first

Other Screen Displays (

55).

(

43), and then continue as follows.

Video • 33

Additional Functions

(

18)

: Special Scene Recording Programs

Recording in a very bright ski resort or

capturing the full colors of a sunset or a

fireworks display becomes as easy as

selecting a Special Scene recording

program. For details about the available

options, refer to the sidebar on page 35.

DISP.

Repeatedly press

to turn the

on-screen displays on/off in the

following sequence:

(

18)

• All displays on

• All displays off¹

POINTS TO CHECK

Mode switch:

• All displays on

• Data code²only

• All displays off

FUNC.

19)

(

However, the markers and the icons

and

FUNC.

will still appear on the screen.

[

PROGRAM AE]

Data code: Time, date and camera data at

the time of recording. The contents to be

displayed can be selected with the [DATA

Desired recording program

FUNC.

CODE] setting (

64).

34 • Video

[

PORTRAIT]

[

BEACH]

The camcorder

uses a large

aperture, achieving

a focus on the

Use this mode to

record on a sunny

beach. It prevents

the subject from

subject while blurring other distracting

details.

being underexposed.

[

SPORTS]

[

SUNSET]

Use this mode to

record sports

scenes such as

tennis or golf.

Use this mode to

record sunsets in

vibrant colors.

[

NIGHT]

[

SPOTLIGHT]

Use this mode to

record in dimly lit

places.

Use this mode to

record spotlit

scenes.

[

SNOW]

[

FIREWORKS]

Use this mode to

record in bright ski

resorts. It prevents

the subject from

Use this mode to

record fireworks.

being underexposed.

- Autofocus may not work as well as in

other modes. In such case, adjust the

focus manually.

NOTES

• Do not set the mode switch to

during the actual recording of a scene;

the brightness of the picture may change

abruptly.

• [ SNOW]/[ BEACH]

- The subject may become overexposed

on cloudy days or in shaded places.

Check the image on the screen.

• [ PORTRAIT]/[ SPORTS]/

• [ FIREWORKS]

[

BEACH]/[ SNOW]

- To avoid camcorder shake, we

recommend using a tripod. Make sure

to use a tripod especially in

mode, as the shutter

- The picture may not appear smooth

during playback.

• [ PORTRAIT]

- The blur effect of the background

increases the more you zoom in (T).

speed slows down.

• [ NIGHT]

- Moving subjects may leave a trailing

afterimage.

- Picture quality may not be as good as

in other modes.

- White points may appear on the

screen.

Video • 35

1 If the joystick guide appears on the

screen, press to hide it.

2 Adjust ( ) the shutter speed to

the desired value.

Flexible Recording: Changing the

Shutter Speed

Use the automatic exposure (AE)

program to use functions like the white

balance or image effects, or give priority

to the shutter speed.

Use faster shutter speeds to record

subjects moving quickly. Use slower

shutter speeds to add motion blur,

emphasizing the feel of movement.

Shutter speed guidelines

Note that on screen only the

denominator is displayed – [

indicates a shutter speed of 1/250

second, etc.

250]

1/2*, 1/3*, 1/6, 1/12, 1/25

To record in dimly lit places.

1/50

(

18)

To record under most ordinary conditions.

1/120

POINTS TO CHECK

Mode switch:

Options

Default value

To record indoor sports scenes.

1/250, 1/500, 1/1000**

[

PROGRAM AE]

The camcorder automatically adjusts the

aperture and shutter speed to obtain the

optimal exposure for the subject.

To record from within a moving car or train or to

shoot fast-moving subjects such as roller

coasters.

[

SHUTTER-PRIO.AE]

1/2000**

Set the shutter speed value. The camcorder

automatically sets the appropriate aperture

value.

To record outdoor sports scenes on sunny days.

mode only.

FUNC.

19)

NOTES

(

• Do not set the mode switch to

during the actual recording of a scene;

the brightness of the picture may change

abruptly.

FUNC.

[

PROGRAM AE]

Desired option

FUNC.

• [

SHUTTER-PRIO.AE]

- When setting the shutter speed, the

number display will flash if the value is

not appropriate for the recording

conditions. In such case, select a

different value.

TO SET THE SHUTTER SPEED

When you select [ SHUTTER-

PRIO.AE], a numeric value will appear

next to the recording program icon.

- If you use a slow shutter speed in dark

places, you can obtain a brighter

36 • Video

image, but the image quality may be

lower, and the autofocus may not work

well.

- The image may flicker when recording

with fast shutter speeds.

POINTS TO CHECK

: Set the camcorder to record

pause mode.

FUNC.

(

19)

LCD Video Light

1 Activate the self timer.

FUNC.

[

MENU]

You can use the LCD video light to

record in completely dark places. For a

brighter picture, we recommend

[

CAMERA SETUP]

[SELF TIMER]

[

]

keeping a distance of about 20 cm -

60 cm from the subject and/or using the

FUNC.

2 Press

to close the menu.

•

appears.

• Set [SELF TIMER] to [

cancel the self timer.

[

NIGHT] recording program. When

OFF] to

you activate the LCD video light, rotate

the LCD panel to face the subject and

Start/Stop

3 Press

on the camcorder to

use the viewfinder instead (

27).

start recording.

The camcorder starts recording video

(

18)

(

mode) or takes a still

mode) after a

image (

10-second countdown. The

countdown appears on the screen.

FUNC.

(

19)

NOTES

FUNC.

[

LCD LIGHT OFF]

LCD LIGHT ON]*

Once the countdown has begun, you can

Start/Stop

press

again or turn off the

Press

FUNC.

camcorder to cancel the self timer.

* Using the viewfinder, select [

LCD LIGHT

OFF] instead to turn the LCD video light off.

Closing the LCD panel will also turn the LCD

video light off.

The LCD display turns entirely white

when used as the video light. Use the

viewfinder instead.

Self Timer

(

18)

Video • 37

• Pushing the joystick ( ) toward

[FOCUS] again will return the

camcorder to autofocus.

Manual Focus Adjustment

4 Push the joystick ( ) toward

[NEXT] to save the focus

adjustment.

Autofocus may not work well on the

following subjects. In such case, focus

manually.

Infinity Focus

• Reflective surfaces

• Subjects with low contrast or without

vertical lines

• Fast moving subjects

• Through wet windows

• Night scenes

Use this function when you wish to

focus on faraway subjects such as

mountains or fireworks.

POINTS TO CHECK

Adjust the zoom before you start the

procedure.

(

18)

Mode switch:

POINTS TO CHECK

Adjust the zoom before you start the

procedure.

FOCUS

Mode switch:

FOCUS

1 If the joystick guide does not

appear on screen, press

display it.

Keep the joystick pushed ( ) toward

[FOCUS] for more than

2 seconds.

1 If the joystick guide does not

appear on screen, press

display it.

•

appears.

• Pushing the joystick ( ) toward

[FOCUS] again will return the

camcorder to autofocus.

If [FOCUS] does not appear on the

joystick guide, repeatedly push the

joystick ( ) toward [NEXT] to display

it.

• If you operate the zoom or the

joystick (

changes to “MF”

2 Push the joystick ( ) toward

[FOCUS].

“MF” appears.

and the camcorder returns to

manual focusing mode.

3 Push the joystick ( ) toward

[NEXT] to save the focus

adjustment.

3 Adjust (

necessary.

) the focus as

• Push the joystick ( ) toward

for a farther focal distance or push

it ( ) toward

distance.

for a closer focal

38 • Video

4 Push the joystick ( ) toward

[NEXT] to lock and save the

exposure setting.

Manual Exposure Adjustment

If you operate the zoom during

exposure lock, the brightness of the

image may change.

At times, backlit subjects may appear

too dark (underexposed) or subjects

under very strong lights may appear too

bright or glaring (overexposed). To

correct this, you can manually adjust the

exposure.

White Balance

(

18)

The white balance function helps you to

accurately reproduce colors under

different lighting conditions so that white

objects will always look truly white in

your recordings.

POINTS TO CHECK

Mode switch: (except for the

[

FIREWORKS] recording program).

(

18)

EXP

POINTS TO CHECK

Mode switch: (except for the Special

Scene recording programs)

1 If the joystick guide does not

appear on screen, press

display it.

Options

Default value

[

AUTO]

If [EXP] does not appear on the

joystick guide, repeatedly push the

joystick ( ) toward [NEXT] to display

it.

Settings are automatically set by the

camcorder. Use this setting for outdoor scenes.

[

DAYLIGHT]

For recording outdoors on a bright day.

TUNGSTEN]

2 Push the joystick ( ) toward

[EXP].

The exposure adjustment indicator

and the neutral value “ 0”

appear on the screen.

[

For recording under tungsten and tungsten type

(3-wavelength) fluorescent lighting.

3 Adjust (

) the brightness of the

image as required.

[

SET]

• The adjustment range and the

length of the exposure adjustment

indicator will vary depending on the

initial brightness of the picture.

• Pushing the joystick ( ) toward

[EXP] again will cancel the

Use the custom white balance setting to make

white subjects appear white under colored

lighting.

exposure lock and return the

camcorder to automatic exposure.

Video • 39

Image Effects

FUNC.

19)

(

You can use the image effects to change

the color saturation and contrast to

record images with special color effects.

FUNC.

[

AUTO]

Desired option*

FUNC.

* When you select [ SET], do not press

(

18)

FUNC.

and continue instead with the

following procedure.

POINTS TO CHECK

Mode switch: (except for the Special

Scene recording programs)

TO SET THE CUSTOM WHITE BALANCE

1 Point the camcorder at a white

object, zoom in until it fills the

Options

Default value

[

IMAGE EFFECT OFF]

whole screen and press

When the adjustment is completed,

stops flashing and stays on. The

camcorder retains the custom setting

even if you turn off the camcorder.

Records with no image enhancing effects.

VIVID]

Emphasizes the contrast and color saturation.

NEUTRAL]

Tones down the contrast and color saturation.

SOFT SKIN DETAIL]

[

FUNC.

2 Press

to save the setting

and close the menu.

[

NOTES

• When you select the custom white balance:

- Set the custom white balance in a

sufficiently illuminated place.

[

Softens the details in the skin tone area for a

more complimentary appearance. To obtain the

best effect, use this setting when recording a

person in close-up. Note that areas similar to

the skin color may lack in detail.

- Select a zoom type other than

[

DIGITAL] (

28).

- Reset the white balance when the

lighting conditions change.

- Depending on the light source,

may

keep flashing. The result will still be

better than with [ AUTO].

• Custom white balance may provide

better results in the following cases:

- Changing lighting conditions

- Close-ups

- Subjects in a single color (sky, sea or

forest)

- Under mercury lamps and certain types

of fluorescent lights

FUNC.

19)

(

FUNC.

[

IMAGE EFFECT OFF]

Desired option

FUNC.

40 • Video

Setting

Digital Effects

FUNC.

(

19)

(

18)

FUNC.

[

D.EFFECT OFF]

Desired option*

FUNC. **

POINTS TO CHECK

Mode switch:

: [

BLK&WHT],[

only.

SEPIA]

* You can preview the effect on the screen.

** The icon of the selected effect appears.

Options

Default value

Applying

[

D.EFFECT OFF]

Select this setting when you do not intend to

use the digital effects.

[

FADE-T] (fade trigger), [

WIPE]

Select one of the faders to begin or end a scene

with a fade from or to a black screen.

1 If the joystick guide does not

appear on screen, press

display it.

[

BLK&WHT]

Records images in black and white.

SEPIA]

guide, repeatedly push the joystick

) toward [NEXT] to display it.

does not appear on the joystick

(

[

2 Push the joystick ( ) toward

• The icon of the selected effect

turns green.

• Push the joystick ( ) toward

Records images in sepia tones for an “old”

look.

[

ART], [

MOSAIC]

again to deactivate the fader/effect.

TO FADE IN

Push the joystick ( ) toward

Select one of these digital effects to add

“flavor” to your recordings.

NOTES

record pause mode (

), then press

to start recording with a fade

Start/Stop

in.

• When you apply a fader, not only the

picture but also the sound will fade in or

out. When you apply an effect, the sound

will be recorded normally.

TO FADE OUT

• The camcorder retains the last setting

used even if you turn off the digital

effects or change the recording program.

Push the joystick ( ) toward

while

recording ( ), then press

Start/Stop

fade out and pause the recording.

Video • 41

Managing Scenes and the Disc

TO ACTIVATE AN EFFECT

: Push the joystick (

Managing Scenes and the

Disc

)

toward

pause mode.

: Push the joystick (

while recording or in record

Creating a Playlist

)

toward

and then press

Start/Stop

record the still image.

Create a playlist to easily edit your

movies. Include in your playlist only the

scenes you prefer or change the order in

which they will be played back, without

affecting your original recordings. After

you add scenes to the playlist, you can

switch between the original scenes and

the playlist.

Adding Scenes to the Playlist

You can choose to add to the playlist all

the original scenes at once or only the

selected scene.

(

18)

POINTS TO CHECK

Disc type: DVD-RW • VR mode

From the original index screen, select

) the scene to add to the

(

playlist. To add all scenes, there is no

need to select any particular scene.

FUNC.

(

19)

FUNC.

[

ADD TO PLAYLIST]

Desired option [YES]

To delete scenes from the playlist, refer

to Deleting Scenes ( 33).

42 • Video

Switching Between Original and Playlist

Scenes

FUNC.

19)

(

FUNC.

(

18)

[

MOVE]

Move (

)

the orange marker to the scene’s

POINTS TO CHECK

new position*

[YES]

Press

Disc type:

DVD-RW • VR mode

* The original position of the scene and the

current position of the marker are displayed

at the bottom of the screen.

FUNC.

(

19)

FUNC.

[

TO PLAYLIST]*

Dividing Scenes

* Appears in the original index screen. In the

playlist, [

instead.

TO ORIGINAL] appears

You can divide scenes in order to leave

only the best parts and later cut out the

rest. Remember that when you divide

scenes in the playlist, you do not affect

your original recordings.

Original index screen (original recordings)

ORIGINAL

(

18)

POINTS TO CHECK

Disc type: DVD-RW • VR mode

PLAYLIST

Playlist index screen

From the original index screen, switch to

the playlist ( 43). From the playlist

Moving Scenes in the Playlist

index screen, select (

scene to divide.

) the

(

18)

FUNC.

(

19)

POINTS TO CHECK

Disc type: DVD-RW • VR mode

FUNC.

[

DIVIDE]

Playback of the

scene begins

to divide the scene*

Pause at the point

From the original index screen, switch to

the playlist ( 43). From the playlist

FUNC.

Press

[YES]

index screen, select (

scene to move.

) the

* You can use the following icons and fast

playback mode (

to a precise point.

32) to bring the scene

: Frame jump forward/backward.

Video • 43

Disc Playback on an External Device

NOTES

Disc Playback on an

External Device

• Very short scenes (shorter than

2 seconds) cannot be divided.

• The new scene will be added to the

playlist after the scene that was divided.

Changing the Disc Title

Before you finalize your disc, you can

give it a title¹. The disc title will be

displayed on the index screen when

playing the finalized disc in most DVD

players. You can check the disc’s title

with the [DISC INFO] menu option

Initializing the Disc

You need to initialize all new DVD-RW

discs when you first insert them into the

camcorder and you may have to

initialize them if you get the message

“UNABLE TO RECOGNIZE THE DATA”.

You can also initialize a DVD-RW disc

when you want to completely erase the

disc to reuse it or in order to change the

disc specification.

(

63).

You can change the title of DVD-RW discs

recorded in VR mode also after having

finalized them.

(

18)

(

18)

FUNC.

(

20)

POINTS TO CHECK

Disc type: DVD-RW

FUNC.

[

MENU]²

DISC OPERATIONS]

FUNC.

20)

(

[DISC TITLE]

Enter the title (up to 20

FUNC.

characters)³

[

MENU]

DISC OPERATIONS]

[SET]

[YES]

FUNC.

[INITIALIZE DISC]

Select a disc specification*

[YES]

Only when using a DVD-RW recorded in VR

FUNC.

mode. Otherwise, pressing

will open

the menu directly on the setup menus

screen.

Select one character at a time and press

to add it to the title. Select

FUNC. **

* For details about disc specifications, refer to

Disc specification on DVD-RWs. ( 3)

**Close the menu only after the screen display

[BACKSPACE] and press

to delete the

character to the left of the cursor’s position.

returns to the [

menu.

DISC OPERATIONS]

IMPORTANT

Initializing the disc will permanently erase

all recordings. The lost original recordings

cannot be recovered.

44 • Video

IMPORTANT

Finalizing the Disc

• Be sure to finalize the disc in normal

room temperatures. If the procedure

was not completed correctly due to

high temperature, let the camcorder

cool off before resuming operation.

• Place the camcorder on a table or

other stable surface before starting

the procedure. Subjecting the

To play the disc you recorded on a DVD

player, a computer’s DVD drive or other

digital device, you need to finalize it

first. You do not need to finalize the disc

to play back your recordings with the

camcorder connected to the TV.

camcorder even to slight impacts (for

example to place it on a table or to

disconnect a cable) after the

(

18)

finalization process started may result

in permanent data loss.

• Do not disconnect the power source

while the operation is in progress. Doing

so can interrupt the process and result in

permanent data loss.

POINTS TO CHECK

Power the camcorder using the

compact power adapter or a fully

charged battery pack.

FUNC.

• Depending on the type of disc and the

disc specification, after finalizing the disc

you may not be able to initialize the disc,

edit your recordings or add new

(

20)

FUNC.

[

MENU]*

DISC OPERATIONS]

recordings to the disc.

• Do not use this camcorder to finalize

discs that were not recorded using it.

[FINALIZE]

[YES]**

Press

screen appears

when the confirmation

NOTES

FUNC.

• The time required to finalize the disc

depends on the scenes recorded and the

remaining free space on the disc.

* Only when using a DVD-RW recorded in VR

mode. Otherwise, pressing

the menu directly on the setup menus

screen.

**During the disc finalization a progress bar is

displayed.

FUNC.

will open

• After the disc is finalized,

on the playback screen.

will appear

Video • 45

NOTES

Disc Playback on External Devices

• DVD-RW discs recorded in VR mode can

be played only on VR mode-compatible

DVD players.

• Depending on your DVD device you may

not be able to play the disc.

• In order to play the disc on a computer

you need to have DVD playback

software installed and running. Also, in

order to play back a DVD-R DL you must

have a DVD drive capable of reading

dual-layered DVD discs.

After finalizing the disc with your

recordings, you can play it on DVD

players compatible with the type of disc

used (DVD-R, DVD-R DL or DVD-RW).

You cannot play back discs on an

external DVD device if the discs have

not yet been finalized.

For a summary, you can refer to the

sidebar on page 46. For details about

disc compatibility refer to the instruction

manual of the DVD player or DVD drive.

Unfinalizing the Disc - Additional

Recordings on a Finalized Disc

ON A DVD PLAYER

1 Turn on the TV and DVD player.

Unfinalize a disc to allow recording

additional movies on the disc even after

it was finalized.

2 Insert the finalized disc in the DVD

player.

3 Select the scene you want to play

from the index screen.

(

18)

POINTS TO CHECK

Disc type: DVD-RW •

ON A cOMPUTER’S DVD DRIVE

VIDEO mode • Finalized

Power the camcorder using the

compact power adapter or a fully

charged battery pack.

1 Insert the finalized disc in the DVD

drive.

2 Run the DVD playback software.

Refer also to the instruction manual

and help modules of your DVD

playback software.

Restrictions after disc finalization

Additional

recordings

Editing

recordings

Initializing

the disc

Unfinalizing

the disc

DVD-R/DVD-R DL

–

in VIDEO mode

DVD-RW in VIDEO mode

–

DVD-RW in VR mode

–

You will need to unfinalize the disc first.

Only scenes in the playlist can be divided.

46 • Video

FUNC.

20)

(

FUNC.

[

DISC OPERATIONS]

[UNFINALIZE]

[YES]*

Press

when the confirmation

screen appears

FUNC.

* During the disc unfinalization a progress bar

is displayed.

IMPORTANT

• Be sure to unfinalize the disc in

normal room temperatures. If the

procedure was not completed

correctly due to high temperature, let

the camcorder cool off before

resuming operation.

• Place the camcorder on a table or

other stable surface before starting

the procedure. Subjecting the

camcorder even to slight impacts (for

example to place it on a table or to

disconnect a cable) after the

unfinalization process started may

result in permanent data loss.

• Do not disconnect the power source

while the operation is in progress. Doing

so can interrupt the process and result in

permanent data loss.

• Only discs that were finalized using this

camcorder can be unfinalized with it.

Discs that can be unfinalized

DVD-R/DVD-R DL

–

in VIDEO mode

DVD-RW

in VIDEO mode

–

DVD-RW

in VR mode

You can record additional

scenes even without

unfinalizing the disc

Video • 47

Photos

Refer to this chapter for details on shooting photos – from capturing

and playing back images to printing them.

Basic Recording

3 Move the lens cover switch down

Basic Recording

to open the lens cover.

Start/Stop

4 Press

• Once the focus is automatically

adjusted,

will turn green and one

Taking Photos

or more AF frames will appear.

• The CARD access indicator will

flash as the still image is being

recorded.

Before using a memory card for the

first time, be sure to initialize it with

this camcorder (

IMPORTANT

56).

Observe the following precautions while

the card access display (

) appears on

(

18)

screen, and when the CARD access

indicator is on or flashing. Failing to do so

may result in permanent data loss.

- Do not subject the camcorder to

vibrations or strong impacts.

- Do not open the memory card slot cover

and do not remove the memory card.

- Do not disconnect the power source or

turn off the camcorder.

- Do not change the position of the

switch or the operating mode.

NOTES

If the subject is not suitable for autofocus,

turns yellow. Adjust the focus manually

(

38).

1 Move the

images).

switch to

(still

2 Turn the

switch to ON to set

the camcorder in CAMERA mode.

The red CAMERA indicator will turn

on.

48 • Photos

Selecting Photo Size and Quality

FUNC.

19)

(

Still images are recorded on the memory

card using JPEG compression. As a

general rule select a larger image size

FUNC.

[

(

1152x864] (

1024x768]

only)

for higher quality.

Select the

[LW 1152x648] size for photos with an

aspect ratio of 16:9.

only)

Desired image size*

Desired image quality*

FUNC.

(

18)

* Press

to move back and forth between

Options

size and quality selection. The number

displayed on the right corner indicates the

approximate number of images that can be

recorded with the current quality/size

setting.

Image size options and the approximate

number of still images that can be

recorded on memory cards of various

sizes are given in the table below.

NOTES

When printing still images, use the

following guidelines as a reference for

selecting the print size.

Approximate number of still images on a memory card

Default value

Memory card

Image quality¹

Image size ↓

LW 1152x648

128 MB

512 MB

1 GB

→

245

360

695

970 1,435 2,745 1,945

2,875

5,490

(

only)

L 1152x864

185

235

280

345

545

695

735 1,115 2,155 1,470

940 1,370 2,745 1,885

2,235

2,745

4,315

5,490

(

only)

L 1024x768

(

only)

S 640x480

585

850 1,530 2,320 3,355 6,040 4,645

6,715 12,085²

: [SUPER FINE],

: [FINE],

: [NORMAL]

This is the number of images that can be recorded. However, the maximum number of remaining

still images displayed on the screen will be 9999.

Photos • 49

Basic Playback

Image size

Recommended use

Basic Playback

LW 1152x648

To print photos with a 16:9

aspect ratio. Wide-sized

photo paper is required.

Viewing Photos

L 1152x864

To print photos up to L size

(9 x 13 cm) or postcard size

(10 x 14.8 cm).

S 640x480

To send images as e-mail

attachments or to post on

the Web.

(

18)

Erasing the Last Photo Just Recorded

You can erase the still image recorded

last while reviewing it within the time set

for the [REVIEW] option (or immediately

after recording it, if [REVIEW] is set to

[

OFF]).

(

18)

1 Move the

images).

switch to

(still

2 Turn the

switch to ON, then

turn it toward MODE and release it

to set the camcorder in PLAY

mode.

The green PLAY indicator will turn on.

While reviewing the image immediately

after recording:

3 Use the joystick (

between images.

) to move

1 Push the joystick ( ) toward

Image Jump Function

2 Select (

) [ERASE] and press

You can locate a specific image without

having to browse all of them one by one.

50 • Photos

- Do not disconnect the power source or

turn off the camcorder.

TO RUN THROUGH THE STILL IMAGES

- Do not change the position of the

switch or the operating mode.

• The following may not be displayed

correctly.

- Images not recorded with this

camcorder.

- Images edited on a computer.

- Images whose file names have been

changed.

Push the joystick (

pressed down to run quickly through

the still images.

) and hold it

Slideshow

TO SKIP 10 OR 100 STILL IMAGES

FUNC.

(

19)

FUNC.

[

SLIDESHOW]

[START]

• Images are played back one after

another.

1 If the joystick guide does not

FUNC.

• Press

to stop the slideshow.

appear on screen, press

display it.

2 Push the joystick ( ) toward

Index Screen

1 Move the zoom lever toward W.

The still images index screen

appears.

2 Select (

• Move the green selection frame to

the image you want to view.

• If you have a lot of still images, you

may find it easier to browse entire

index pages instead. Move the

zoom lever toward W to extend the

green selection frame to the whole

) an image.

3 Select (

or [

) [

JUMP 10 IMAGES]

JUMP 100 IMAGES].

4 Jump (

selected and press

You can press

joystick guide.

) the number of images

again to hide the

IMPORTANT

page, and move (

) between

index pages. Move the zoom lever

toward T to return to moving

between single images.

• Observe the following precautions while

the card access display ( ) appears

on screen, and when the CARD access

indicator is on or flashing. Failing to do

so may result in permanent data loss.

- Do not subject the camcorder to

vibrations or strong impacts.

3 Press

The index screen closes and the

selected image is displayed.

- Do not open the memory card slot

cover and do not remove the memory

card.

Photos • 51

Erasing a Single Image

Magnifying Photos during Playback

(

18)

During playback, still images can be

magnified up to 5 times.

(

18)

1 If the joystick guide does not

appear on screen, press

display it.

2 Select (

erase.

) the image you want to

1 Move the zoom lever toward T.

3 Push the joystick ( ) toward

• The image is magnified by 2 times

and a frame appears indicating the

position of the magnified area.

• To further enlarge the image, move

the zoom lever toward T. To reduce

the magnification to less than 2

times, move the zoom lever toward

4 Select (

) [ERASE] and press

Erasing All Images

(

18)

•

will appear for images that

cannot be enlarged.

FUNC.

(

20)

2 Move (

) the frame to the

part of the image you want to see

enlarged.

FUNC.

[

MENU]

STILL IMG OPER.]

To cancel the magnification, move

the zoom lever toward W until the

frame disappears.

[ERASE ALL IMAGES]

[YES]

FUNC.

Erasing Photos

IMPORTANT

Be careful when erasing images. Erased

images cannot be recovered.

You can erase still images recorded on

the memory card. You can erase either a

single still image or all the still images.

NOTES

Protected images on the memory card

cannot be erased.

52 • Photos

Additional Functions

Options

SINGLE]

Default value

Additional Functions

[

Records a single still image.

[

CONT.SHOOT.] (Continuous Shooting),

HISPEED CONT.SHOOT. ]

Continuous Shooting and

Exposure Bracketing (Drive Mode)

(High-Speed Continuous Shooting)

Captures a series of still images as long as you

hold Start/Stop pressed down. For the number

of frames per second, refer to the sidebar on

page 53.

Take a series of pictures of a moving

subject or record the same picture in

3 levels of exposure in order to choose

later the picture you like the best.

[

AEB] (Auto Exposure Bracketing)

(

18)

The camcorder records a still image in three

different exposures (dark, normal, light in 1/2

EV steps), allowing you to choose the shot you

like the best.

POINTS TO CHECK

Mode switch: (except for the

[

FIREWORKS] recording program).

FUNC.

19)

(

FUNC.

[

SINGLE]

Desired option

FUNC.

Maximum number of continuous shots

Number of frames (shots) per second

Maximum number of continuous shots

Normal speed

High speed

2.5 frames

4.2 frames

LW 1152x648, L 1152x864

20 images

60 images

S 640x480

These figures are approximate and vary with the recording conditions and subjects.

The actual number of frames per second will be lower when

is displayed on the screen.

(camcorder shake warning)

Photos • 53

Options

CONTINUOUS SHOOTING/

HIGH-SPEED CONTINUOUS SHOOTING

Default value

[

ON:AiAF]

(Mode switch: *,

)

Start/Stop

Press

down.

and hold it pressed

Depending on the shooting conditions, one or

more AF frames out of the nine frames

available are automatically selected and the

focus is fixed on them.

Once the focus is automatically

adjusted,

will turn green. A series of

still images will be recorded as long as

you hold the button pressed.

[

ON:CENTER]

(Mode switch: *)

AUTO EXPOSURE BRACKETING

In this mode, a single focusing frame appears

in the center of the screen and the focus is

automatically fixed on it. This is convenient for

making sure the focus is exactly where you

want it.

Start/Stop

Press

Once the focus is automatically

adjusted,

will turn green. Three still

images in different exposures will be

recorded on the memory card.

[

OFF]

Select this option if you wish to record a still

Start/Stop

image as soon as you press

Automatic Focus Priority

* Except for the [ FIREWORKS] recording

program.

When the focus priority is activated, the

camcorder records a still image only

after the focus has been adjusted

automatically.

FUNC.

(

20)

FUNC.

[

MENU]

CAMERA SETUP]

(

18)

POINTS TO CHECK

Mode switch at

cannot be turned off.

[FOCUS PRI.]

Desired option

: The focus priority

FUNC.

Mode switch at : You can turn off the

focus priority and you can also select

the AF (autofocus) frame to be used.

NOTES

In the [ FIREWORKS] recording program

the focus priority is automatically set to

[

OFF].

54 • Photos

• All displays off

However, the markers and the

Histogram and Other Screen Displays

icon and

AF frames when the autofocus is locked will

still appear on the screen.

When viewing still images you can

display the histogram and the icons of

all the functions used at the time of

recording. Use the histogram as a

reference to verify the correct exposure

of the still image.

The area to the right of the histogram

represents highlights and the left side

represents shadows. A still image

whose histogram skews to the right is

relatively bright; while one whose

histogram peaks to the left, is relatively

dark.

Protecting Photos

You can protect still images recorded on

the memory card from accidental

erasure.

(

18)

FUNC.

(

19)

FUNC.

[

PROTECT]

Press

[

PROTECT]: The image selection

Shadows

Highlights

screen appears.

NOTES

FROM THE IMAGE SELECTION SCREEN

The histogram will appear also after

recording a still image, while reviewing it

within the time set for the [REVIEW] option

(or immediately after recording it, if

1 Select (

want to protect.

) the still image you

2 Press

to protect the still image.

appears on the bottom bar and

the image cannot be erased. Press

again to cancel the image

protection.

[REVIEW] is set to [

OFF]). You can

choose to turn off the histogram by

DISP.

pressing

3 Repeat steps 1-2 to protect

additional images or press ^FUNC.

twice to close the menu.

TO SELECT THE ON-SCREEN DISPLAYS

DISP.

Repeatedly press

to turn the on-

screen displays on and off in the

following sequence.

IMPORTANT

Initializing the memory card (

permanently erase all recorded still images,

even the protected ones.

56) will

• All displays on

• All displays off¹

• All displays on

• Regular displays only (removes the

histogram and information icons)

Photos • 55

You can also use the following

functions...

Initializing the Memory Card

The following functions and features

of the camcorder can be used either

for shooting video or for taking

photos. The way to set and use

them was already explained in

detail, so we refer you to the relevant

page in the “Video” section.

Initialize memory cards when you use

them with this camcorder for the first

time, or to erase all the still images on

them.

Options

[INITIALIZE]

• Quick Start (

• Zoom ( 28)

• Special Scene recording programs

34)

• Flexible recording programs (

• LCD video light ( 37)

29)

Clears the file allocation table but does not

physically erase the stored data.

(

[COMPL.INIT.]

36)

Erases all data completely.

• Self timer (

37)

• Manual focus (

38)

• Manual exposure adjustment (

39)

(

18)

• White balance (

• Image effects (

• Digital effects (

39)

40)

41)

FUNC.

20)

(

FUNC.

[

MENU]

STILL IMG OPER.]

[INITIALIZE CARD]

Select the card initialization

method

[YES]*

FUNC.

* Press

to cancel the complete

initialization while it is in progress. All the

image files will be erased and the memory

card can be used without any problem.

IMPORTANT

Initializing the memory card will erase all

still images, even the protected ones. The

original still images cannot be recovered.

56 • Photos

Printing Photos

FUNC.

19)

(

FUNC.

[

PRINT ORDER]

Press

Printing Photos

: The image selection screen

appears.

You can print images on the

camcorder’s memory card by inserting it

into the memory card slot of a printer

compatible with DPOF (Digital Print

Order Format). You can mark in advance

the still images you want to print and set

the desired number of copies as a print

order ( 57).

FROM THE IMAGE SELECTION SCREEN

1 Select (

) the still image you

want to mark with a print order.

2 Press

to set the print order.

The number of copies appears in

orange in the box next to the print

order symbol

3 Set ( ) the number of copies

desired and press

To cancel the print order, set (

number of copies to 0.

NOTES

• For more information, refer to the

printer’s instruction manual.

• About DPOF: DPOF is a specification that

allows you to specify the still images and

information to be printed.

) the

4 Repeat steps 1-3 to mark

additional images with print orders

FUNC.

or press

menu.

twice to close the

Print Orders

Erasing All Print Orders

You can mark in advance the still images

you want to print and set the desired

number of copies as a print order. Later,

you can easily print out the print orders

by inserting the camcorder's memory

card into a DPOF-compatible printer

that has a memory card slot. Refer to

the printer's instruction manual for the

procedure. You can set print orders for

up to 998 still images.

(

18)

FUNC.

(

20)

FUNC.

[

MENU]

STILL IMG OPER.]

[ERASE ALL

[YES]

ORD]

Selecting Still Images for Printing

(Print Order)

FUNC.

(

18)

Photos • 57

External Connections

This chapter explains step-by-step how to connect your camcorder to

an external device such as a TV or VCR.

Connecting to

TV or VCR

Connecting to a TV or VCR

AV Terminal

Sound from the built-in speaker will be muted while

the STV-250N Stereo Video Cable is connected to the

camcorder.

Open the LCD panel to

access.

Connection Diagrams

Turn off all the devices when making the connection and refer also to the instruction

manual of the connected device.

Terminal on the

camcorder

Terminal on the

connected device

Connecting cable

Output connection (signal flow ) to a TV or VCR with AV terminals.

VIDEO

AUDIO

Yellow

White

Red

STV-250N Stereo Video Cable

(supplied)

Output connection (signal flow ) to a TV or VCR with SCART terminal.

First, connect a SCART adapter to the SCART terminal on the TV or VCR and then connect the STV-250N

Stereo Video Cable to the adapter.

Red

White

Yellow

STV-250N Stereo Video Cable

(supplied)

SCART adapter

(commercially available)

58 • External Connections

• Refer also to the instruction manual of

the connected TV.

Playback on a TV Screen

This section explains how to play back

the disc or still images with this

camcorder by connecting it to a TV. To

play back the disc with another DVD

device refer to Disc Playback on an

Copying your Recordings to an External

Video Recorder

You can copy your recordings by

connecting the camcorder to a VCR or a

digital video device.

External Device (

44).

(

18)

(

18)

POINTS TO CHECK

Connecting

Before connecting the camcorder, select

the [TV TYPE] setting according to the TV

set to which you will connect the

Connect the camcorder to the device

following one of the connection

diagrams shown in the previous section

camcorder (

65).

Connection Diagrams (

58).

Connecting

Recording

Connect the camcorder to the TV

following one of the connection

1 Connected device: Load a blank

cassette or disc and set the device

to record pause mode.

diagrams shown in the previous section

Connection Diagrams (

58).

2 This camcorder: Locate the scene

you wish to copy and pause

playback shortly before the scene.

Playback

1 Turn on the camcorder and the

connected TV or VCR.

On a TV: Select as the video input the

same terminal to which you

connected the camcorder.

On a VCR: Set the input selector to

the external video input (usually

labeled LINE IN).

3 This camcorder: Resume the

movie playback.

4 Connected device: Begin recording

when the scene you wish to copy

appears. Stop recording when

copying is complete.

5 This camcorder: Stop playback.

2 Start the playback of the movies

(

31) or still images (

50).

NOTES

• We recommend powering the camcorder

using the compact power adapter.

• By default, the on-screen displays will be

embedded in the output video signal, but

• Turn off all the devices before starting

the connections.

• Sound from the built-in speaker will be

muted while the STV-250N Stereo Video

Cable is connected to the camcorder.

• We recommend powering the camcorder

using the compact power adapter.

you can change the displays by

DISP.

repeatedly pressing

(

33).

External Connections • 59

Additional Information

This chapter contains troubleshooting advice, screen messages,

handling and maintenance tips, and other information.

Appendix: Menu Options Lists

Menu items not available appear grayed out. For details about how to select an item,

refer to Using the Menus (

19). For details about each function, see the reference

page. Menu options without a reference page are explained below the tables.

FUNC. Menu

Setup menus

FUNC. Menu

CAMERA

PLAY

Menu item

Setting options

PROGRAM AE],

SHUTTER-PRIO.AE], [ PORTRAIT],

SPORTS], [ NIGHT], [ SNOW],

BEACH], [ SUNSET],

Recording programs

[

–

SPOTLIGHT], [ FIREWORKS]

White balance

[

AUTO], [ DAYLIGHT],

TUNGSTEN], [ SET]

–

Image effects

[

IMAGE EFFECT OFF], [

NEUTRAL], [ SOFT SKIN DETAIL]

VIVID],

LCD video light

[

LCD LIGHT OFF],

LCD LIGHT ON]

Digital effects

[

D.EFFECT OFF], [

FADE-T],

WIPE], [

SEPIA], [

BLK&WHT],

ART], [

MOSAIC]

[

D.EFFECT OFF], [

SEPIA]

BLK&WHT],

–

Recording mode

[

HIGH QUALITY],

STANDARD PLAY], [

LONG PLAY]

Drive mode

[

SINGLE], [

CONT.SHOOT.],

HISPEED CONT.SHOOT], [

AEB]

60 • Additional Information

FUNC. Menu (cont.)

CAMERA

PLAY

Menu item

Setting options

Still image size/quality

Size:

–

[LW 1152x648], [L 1152x864],

[S 640x480]

[L 1024x768], [S 640x480]

Quality: [ SUPER FINE], [ FINE],

[

NORMAL]

[

TO PLAYLIST]

TO ORIGINAL]

–

ADD TO PLAYLIST] [ALL SCENES], [ONE SCENE], [CANCEL]

–

MOVE]

–

DIVIDE]

–

DELETE]

[NO], [YES]

–

[SPEAKER VOL.]

[SLIDESHOW]

[PROTECT]

–

[PRINT ORDER]

[

0] - [ 99] COPIES

–

Option available only when the mode switch is set to

Option available only in the original index screen with DVD-RW discs in VR mode.

Option available only in the playlist index screen with DVD-RW discs in VR mode.

Option available only in the index screen with DVD-RW discs in VR mode.

Option available only during playback.

Additional Information • 61

Camera Setup (Advanced Zoom, Image Stabilizer, etc.)

CAMERA SETUP

CAMERA

Menu item

Setting options

OFF]

[A.SL SHUTTER]

[

ON], [

–

[ZOOM TYPE]

–

[

OPTICAL], [

ADVANCED] , [

DIGITAL]

ADVANCED] , [

[ZOOM SPEED]

[

VARIABLE], [

SPEED 3], [

SPEED 2],

[

SPEED 1]

[FOCUS PRI.]

[

ON:AiAF], [

ON:CENTER], [

OFF]

–

[REVIEW]

[

OFF], [

8 sec], [

2 sec], [

10 sec]

OFF]

4 sec], [ 6 sec],

[IMG STAB]

[

], [

–

[WIDESCREEN]

[SELF TIMER]

ON], [

OFF]

OFF

ON ], [

AUTO], [

–

[WIND SCREEN]

[

]

Option available only when the recording program is set to

PROGRAM AE] recording program).

Option available only when the mode switch is set to

ADVANCED] when [WIDESCREEN] is set to [

Not available when [WIDESCREEN] is set to [ OFF].

(only in the

[

OFF].

[A.SL SHUTTER]: The camcorder automatically uses slow shutter speeds to obtain

brighter recordings in places with insufficient lighting.

• The camcorder uses shutter speeds down to 1/25 (1/12 in

• If a trailing afterimage appears, set the slow shutter to [

mode).

OFF].

• If

(camcorder shake warning) appears, we recommend stabilizing the camcorder, for

example, by mounting it on a tripod.

[REVIEW]: Selects the time to display a still image after it has been recorded.

•

This menu item will not be available when the drive mode (

53) is set to

[

CONT.SHOOT.], [

HISPEED CONT.SHOOT.] or [

AEB].

DISP.

• If you press

while reviewing a still image it will continue to be displayed

Start/Stop

indefinitely. Press

to return to the normal display.

[IMG STAB]: The image stabilizer compensates for camcorder shake even at full

telephoto.

• The image stabilizer is designed to compensate for a normal degree of camcorder

shake.

The image stabilizer may also not be able to compensate

for all movement when recording moving subjects.

• The image stabilizer may not be effective when recording in dark places with

[A.SL SHUTTER] set to [

ON] or using the [

NIGHT] recording program.

62 • Additional Information

•

The image stabilizer may not work well on subjects with low

contrast, with a recurring, repetitive pattern or without vertical lines.

• The image stabilizer cannot be turned off when the mode switch is set to

• We recommend setting the image stabilizer to [ OFF] when using a tripod.

[WIDESCREEN]: The camcorder uses the full width of the image sensor providing high-

resolution 16:9 recordings.

• Since the screens on the camcorder have an aspect ratio of 16:9, recordings with a 4:3

aspect ratio will appear in the center of the screen with black sidebars.

•

Playing back a widescreen recording: TV sets compatible with the WSS system will

automatically switch to wide (16:9) mode. Otherwise, change the aspect ratio of the TV

manually. To play back on a TV with normal aspect ratio (4:3) change the [TV TYPE]

setting accordingly (

65).

[WIND SCREEN]: The camcorder automatically reduces the background sound of wind

when recording outdoors.

• The wind screen cannot be turned off when the mode switch is set to

• Some low-frequency sounds will be suppressed along with the sound of wind. When

recording in surroundings unaffected by wind or if you want to record low-frequency

sounds, we recommend setting the wind screen to [

OFF

Disc Operations (Initialization, Finalization etc.)

DISC OPERATIONS

CAMERA

PLAY

Menu item

[DISC INFO]

Setting options

–

[INITIALIZE DISC]

[VIDEO], [VR], [CANCEL]

[NO], [YES]

–

[FINALIZE]

[UNFINALIZE]

–

[DEL.ALL MOVIES]

–

[DEL.PLAYLIST]

–

[DISC TITLE]

–

Option available only with DVD-RW discs.

Option available only with finalized DVD-RW discs in VIDEO mode.

Option available only in the original index screen with DVD-RW discs in VR mode.

Option available only in the playlist index screen with DVD-RW discs in VR mode.

[DISC INFO]: Displays a screen where you can verify the details regarding the disc.

• The disc information includes the disc title, the disc type (DVD-R, DVD-R DL or DVD-

RW), the disc specification (VIDEO mode or VR mode), and an icon to indicate whether

the disc is finalized ( ).

Additional Information • 63

Still Image Operations (Card Initialization, etc.)

STILL IMG OPER.

Menu item

[ERASE ALL ORD]

PLAY

Setting options

[NO], [YES]

[ERASE ALL IMAGES]

[INITIALIZE CARD]

[INITIALIZE], [COMPL.INIT.], [CANCEL]

Display Setup (LCD Brightness, Language, etc.)

DISPLAY SETUP

CAMERA

PLAY

Menu item

Setting options

[BRIGHTNESS]

[TV SCREEN]

[MARKERS]

–

[

ON], [

OFF]

LEVEL(WHT)],

–

[

OFF], [

LEVEL(GRY)], [

GRID(GRY)]

–

GRID(WHT)],

[DATA CODE]

[LANGUAGE]

[

DATE], [ TIME],

DATE & TIME], [ CAMERA DATA]

–

[

], [DEUTSCH], [ ],

[ENGLISH], [ESPAÑOL], [FRANÇAIS],

[ITALIANO], [MAGYAR], [MELAYU],

[POLSKI], [ ROMANA ], [TÜRKÇE],

[

], [

ON], [

], [

OFF]

], [

]

[DEMO MODE]

[

–

[BRIGHTNESS]: Adjust (

) the brightness of the LCD display with the joystick.

• Changing the brightness of the LCD display does not affect that of the viewfinder or the

recordings.

[TV SCREEN]: When set to [

ON], the camcorder’s on-screen displays will appear also

on the screen of a connected TV or monitor.

[MARKERS]: You can display a grid or a horizontal line at the center of the screen. The

markers are available in white or gray. Use the markers as a reference to make sure your

subject is framed correctly (vertically and/or horizontally).

• Using the markers will not affect the recordings.

[DEMO MODE]: The demonstration mode displays the camcorder’s main features. It starts

automatically when the camcorder is powered with the power adapter if you leave it turned

on without loading a recording media for more than 5 minutes.

• To cancel the demo mode once it started, press any button, turn off the camcorder or

load a disc.

64 • Additional Information

System Setup (Volume, Beep, etc.)

SYSTEM SETUP

CAMERA

PLAY

Menu item

Setting options

[SPEAKER VOL.]

[BEEP]

–

[

HIGH VOLUME],

LOW VOLUME], [

ON], [ OFF]

10 min], [

OFF]

[POWER SAVE]

[

–

[

STANDBY OFF]

[

20 min],

–

[

30 min]

[FILE NOS.]

[TV TYPE]

[

RESET], [

CONTINUOUS]

–

[

NORMAL TV], [

WIDE TV]

[FIRMWARE]

–

[SPEAKER VOL.]: Adjust (

) the volume of the playback.

[BEEP]: A beep will accompany some operations like turning on the camcorder, the self-

timer countdown, etc. It also serves as a warning beep under unusual conditions.

[POWER SAVE]: In order to save power when the camcorder is powered by a battery

pack, it will automatically shut off if left without any operation for 5 minutes. Approximately

30 seconds before the camcorder shuts off, the message “ AUTO POWER OFF” will

appear.

[

STANDBY OFF]: Select the length of time after which the camcorder will end the

standby mode and shut off automatically.

[FILE NOS.]: Select the image numbering method to be used when you insert a new

memory card.

Images are automatically assigned consecutive image numbers from 0101 to 9900, and

stored in folders containing up to 100 images. Folders are numbered from 101 to 998.

[

RESET]: Image numbers will restart from 101-0101 every time you insert a new

memory card.

[

CONTINUOUS]: Image numbers will continue from the number following that of the

last image recorded with the camcorder.

• If the memory card you insert already contains an image with a larger number, a new

image will be assigned a number one higher than that of the last image on the memory

card.

• We recommend using the [

CONTINUOUS] setting.

[TV TYPE]: In order to display the picture in full and in the correct aspect ratio, select the

setting according to the type of television to which you will connect the camcorder.

[

NORMAL TV]: TV sets with 4:3 aspect ratio.

WIDE TV]: TV sets with 16:9 aspect ratio.

[FIRMWARE]: You can verify the current version of the camcorder’s firmware. This menu

option is usually grayed out.

Additional Information • 65

Date/Time Setup

DATE/TIME SETUP

Menu item

[T.ZONE/DST]

CAMERA

PLAY

Setting options

List of world time zones.

–

[DATE/TIME]

–

[DATE FORMAT]

[Y.M.D (2008.1.1 AM 12:00)],

[M.D,Y (JAN. 1, 2008 12:00 AM)],

[D.M.Y (1.JAN.2008 12:00 AM)]

[DATE FORMAT]: Changes the date format for on-screen displays.

66 • Additional Information

Trouble?

Troubleshooting

If you have a problem with your camcorder, refer to this section. Consult your dealer

or a Canon Service Center if the problem persists.

Camcorder is on but is unresponsive.

- The camcorder has exceeded its

Power Source

operational temperature (

Turn off the camcorder and let it cool

down before resuming use.

appears).

• The camcorder will not turn on or it

turns off by itself.

• The disc compartment cover will not

open.

• The LCD/viewfinder switches on and

off.

- Battery pack is exhausted. Replace or

Recording/Playback

charge the battery pack (

- Attach the battery pack correctly.

- Use the compact power adapter.

16).

Buttons will not work.

- Turn on the camcorder.

- Load a disc (

23).

The charge indicator flashes rapidly.

Abnormal characters appear on the

screen. The camcorder does not operate

properly.

(one flash at 0.5-second

intervals)

Charging has stopped because the

compact power adapter or the battery

pack is faulty. Consult a Canon Service

Center.

(two quick flashes at

1-second intervals)

- Disconnect the power source and

reconnect it after a short time. If the

problem still persists, disconnect the

power source and press the RESET

button with a pointed item. Pressing the

RESET button resets all settings.

Battery pack at least 50% charged

appears on the screen.

(

17). This is not a malfunction.

- Load a disc (

23).

• Battery pack will not charge.

• The charge indicator flashes very

slowly (one flash at 2-second intervals).

appears on the screen.

- Battery pack is exhausted. Replace or

charge the battery pack (

17).

- Charge the battery pack in

temperatures between 0 °C and 40 °C.

- Battery packs become hot with use and

may not charge. When the battery pack

is outside the charging temperature

range, the CHARGE indicator will flash

irregularly. The charging will start once

the battery pack temperature is below

40 °C.

- The battery pack is damaged. Use a

different battery pack.

- If you connect a faulty power adapter or

battery pack, the CHARGE indicator

flashes approx. twice per second and

the charging stops.

Video noise appears on screen.

- When using the camcorder close to

devices that emit strong

electromagnetic fields (plasma TVs,

cellular phones, etc.), keep a distance

between the camcorder and these

devices.

Video noise appears on the TV screen.

- When using the camcorder in a room

where a TV is located, keep a distance

between the compact power adapter

and the power or antenna cables of the

TV.

- Check that the compact power adapter

is correctly connected to the

camcorder.

Additional Information • 67

Even without a disc loaded, when

closing the disc compartment cover a

motor sound can be heard.

- The camcorder is checking if a disc is

loaded or not. This is not a malfunction.

- Load a disc that has been tested

4).

- The disc is full (“

the screen). Delete some recordings

(DVD-RW in VR mode) to free some

(

END” appears on

space (

33) or replace the disc.

Cannot open the disc cover to remove

the disc.

- Turn off the camcorder, disconnect the

compact power adapter and remove

the battery pack. Restore the power

supply and try again.

- The camcorder has exceeded its

operational temperature. Turn off the

camcorder and let it cool down before

resuming use.

- Unfinalize (

46) the disc (DVD-RW in

- The camcorder has exceeded its

operational temperature. Turn off the

camcorder and let it cool down before

resuming use.

VIDEO mode).

Even after stopping recording, the disc

access indicator does not go off.

- The scene is being recorded on the

disc. This is not a malfunction.

The disc cannot be recognized.

- The disc is dirty. Clean the disc with a

Start/Stop

The point where

was pressed

soft lens-cleaning cloth (

74). If the

does not match the beginning/end of the

recording.

problem persists replace the disc.

- The disc is not correctly loaded. Check

- There is a slight interval between

Start/Stop

the disc (

23).

pressing

and the actual start

- Verify that the camcorder supports the

of the recording on the disc. This is not

a malfunction.

type of DVD disc you inserted (

3).

The camcorder vibrates.

- Depending on the condition of the disc,

The recording suddenly stops shortly

after starting recording.

- The disc is dirty. Clean the disc with a

the camcorder might vibrate

occasionally. This is not a malfunction.

soft lens-cleaning cloth (

74). If the

problem persists replace the disc.

- The camcorder has exceeded its

operational temperature. Turn off the

camcorder and let it cool down before

resuming use.

• The disc’s rotation can be faintly heard.

• Occasionally the operation sound can

be heard.

- The disc is activated from time to time.

This is not a malfunction.

Camcorder will not focus.

- Autofocus does not work on that

subject. Focus manually (

- If you are using the viewfinder, adjust it

with the dioptric adjustment lever

• After using the camcorder for a long

time, it becomes hot.

38).

•

lights up in red.

- This is not a malfunction. Turn the

camcorder off and let it cool for a while

before resuming operation.

(

27).

- Lens is dirty. Clean the lens with a soft

lens-cleaning cloth ( 74). Never use

tissue paper to clean the lens.

Recording

Sound is distorted.

Image will not appear on the screen.

- Set the camcorder to

mode (

- Open the lens cover.

- When recording near loud sounds (such

as fireworks or concerts), sound may

become distorted.

26).

A vertical light bar appears on the

screen.

- Bright light in a dark scene may cause a

vertical light bar (smear) to appear. This

is not a malfunction.

Start/Stop

Pressing

recording.

- Set the camcorder to

mode (

will not start

26).

68 • Additional Information

Viewfinder picture is blurred.

- Adjust the viewfinder with the dioptric

- You may not be able to edit the title if

you entered it with another digital

device.

adjustment lever (

27).

Cannot edit or delete scenes.

- You cannot edit or delete scenes on a

disc that was protected with another

digital device.

- Scenes cannot be deleted in a DVD-R/

DVD-R DL disc or a DVD-RW disc

recorded in VIDEO mode.

Playback/Editing

Playback does not start.

- Load a disc ( 23).

- Set the camcorder to

31).

mode

(

Cannot finalize the disc.

- You may not be able to play with this

camcorder, discs recorded or edited

with other DVD recorders or computer

DVD drives.

- If using a single-sided disc, check that

the disc is inserted with the label side

facing up.

- The camcorder has exceeded its

operational temperature. Turn off the

camcorder and let it cool down before

resuming use.

- When using a battery pack, make sure

it is fully charged.

- The camcorder has exceeded its

operational temperature. Turn off the

camcorder and let it cool down before

resuming use.

No sound from the built-in speaker.

- Open the LCD panel.

- Speaker volume is turned off. Adjust the

volume with the [SPEAKER VOL.]

setting (

32).

• During playback there is video noise

and the sound is distorted.

• The disc cannot be read.

- The disc is dirty. Clean the disc with a

Playing Back the Disc in an External

DVD Device

soft lens-cleaning cloth (

74).

- You may not be able to play with this

camcorder, discs recorded or edited

with other DVD recorders or computer

DVD drives.

There is a brief stop between scenes.

- Depending on the DVD player, there

might be a very short stop between

scenes during playback.

Cannot add scenes to the playlist.

- The disc is full (“

the screen). Delete some recordings to

free some space ( 33).

- You cannot add more than 999 scenes

to the playlist.

END” appears on

Disc is running, but image will not

appear on the TV screen.

- The video input on the TV is not set to

the video terminal to which you

connected the camcorder. Select the

correct video input.

Cannot divide the scene.

- You attempted to play back an

incompatible disc. Stop playback.

- You cannot edit or delete scenes on a

disc that was recorded in another digital

device.

- You cannot divide the scene if there are

already 999 scenes on the disc.

- You cannot divide original scenes.

- You cannot divide the scene if it is too

short (2 seconds or less).

The disc cannot be recognized by the

device. Or, even though the disc is read,

cannot play back the disc or the picture

is distorted.

- The disc is dirty. Clean the disc with a

soft lens-cleaning cloth (

- Finalize the disc using the camcorder

45).

74).

Cannot edit the disc title.

- You cannot add a title to a DVD-R/DVD-

(

- DVD-RW discs in VR mode can only be

played back with VR mode-compatible

DVD players. Refer to the instruction

manual of your DVD device.

R DL disc after it was finalized (

45).

- Unfinalize (

46) the disc first (DVD-

RW in VIDEO mode).

Additional Information • 69

Cannot edit my recordings or add

recordings to the disc with the DVD

device.

List of Messages (in alphabetical order)

- It may not be possible to edit or add

recordings with an external DVD

recorder on a disc recorded with this

camcorder.

CANNOT ENTER THE

MODE NOW

- The camcorder cannot enter the Quick

STANDBY

Start standby mode ( 29) while the

disc is being recognized after it was

inserted or if the remaining battery

charge is too low.

Memory Card Operation

Memory card cannot be inserted.

- Memory card is not facing the correct

direction. Turn the memory card over

CANNOT PLAY BACK

- The disc is dirty or you attempted to

play back a disc type not supported by

this camcorder (not DVD-R/RW) or a

disc that is dirty or scratched.

- This message can also appear if

condensation has formed. Wait until the

camcorder dries completely before

and reinsert it (

25).

Cannot record on the memory card.

- Memory card is full. Erase still images

(

52) to free some space or replace

the memory card.

- Memory card was not initialized.

Initialize the memory card (

- The folder and file numbers have

reached their maximum value. Set

[FILE NOS.] to [RESET] (

insert a new memory card.

- The write-protect switch on an SD or

SDHC memory card is set to prevent

accidental erasure. Change the position

of the write-protect switch.

resuming use (

76).

56).

CANNOT READ THE DISC

CHECK THE DISC

- Disc could not be read. Try cleaning it

65) and

or replace the disc (

74).

- This message can also appear if the

camcorder has exceeded its

operational temperature. Turn off the

camcorder and let it cool down before

resuming use.

Memory card cannot be played back.

- This message can also appear if

condensation has formed. Wait until the

camcorder dries completely before

- Set the camcorder to

mode

(

50).

resuming use (

- The disc may not be loaded correctly.

Try removing the disc and reinserting it

76).

Image cannot be erased.

- Image is protected. Cancel the

protection (

55).

(

23).

- The write-protect switch on an SD or

SDHC memory card is set to prevent

accidental erasure. Change the position

of the write-protect switch.

• CANNOT RECORD

CHECK THE DISC

- There is a problem with the disc.

Replace the disc (

- This message can also appear if

condensation has formed. Wait until the

camcorder dries completely before

appears in red.

23).

- A memory card error occurred. Turn off

the camcorder. Remove and reinsert

the memory card. Initialize the memory

card (

red.

56) if the icon still appears in

resuming use (

- The disc’s recording surface may be

dirty or scratched.

76).

List of Messages

- This message may appear when the

camcorder is repeatedly subject to

vibration.

70 • Additional Information

CANNOT USE DISC

mode that was finalized with another

digital device.

USE OF A RECOMMENDED DISC IS

ADVISED

DISC MUST BE FINALIZED TO PLAY

BACK IN COMPATIBLE PLAYERS

- Be sure to finalize the disc and check

the compatibility of the device before

playing back the disc on external DVD

- The disc cannot be used. We

recommend that you use a disc that

has been tested (

4).

CARD ERROR

- A memory card error occurred. The

camcorder cannot record or display the

image. The error may be temporary. If

the message disappears after 4

devices (

45).

LOADING THE DISC

- The disc is being read. Wait before you

start recording.

seconds and

the camcorder off, remove the card and

reinsert the card. If changes to

appears in red, turn

NAMING ERROR

- The folder and file numbers have

reached their maximum value. Set the

[FILE NOS.] option to [RESET] and

erase all the images on the memory

green, you can resume recording/

playback.

CARD FULL

- Memory card is full. Erase some images

52) to free some space or replace

card (

52) or initialize it (

56).

(

NO CARD

- There is no memory card in the

the memory card.

camcorder ( 25).

CHANGE THE BATTERY PACK

- Battery pack is exhausted. Replace or

NO DISC

- No disc is loaded. Insert a disc (

- This message can also appear if

charge the battery pack (

16).

23).

DISC ACCESS FAILURE CHECK THE

DISC

- There was an error when reading the

condensation has formed. Wait until the

camcorder dries completely before

resuming use (

76).

disc or attempting to write onto it. Try

cleaning the disc or replace it (

- This message can also appear if

condensation has formed. Wait until the

camcorder dries completely before

74).

NO IMAGES

- No images are recorded on the memory

card.

PRINT ORDER ERROR

- You attempted to set more than 998 still

images in the print order (

resuming use (

76).

- The disc may not be loaded correctly.

Try removing the disc and reinserting it

57).

(

23).

REACHED THE MAXIMUM NUMBER OF

SCENES

- The maximum number of scenes has

been reached. Delete some recordings

(DVD-RW in VR mode) to free some

DISC COVER IS OPEN

- Verify the disc is correctly inserted and

close the disc cover (

DISC FULL

- The disc is full (“

23).

space (

33) or replace the disc.

END” appears on

RECOVERING DATA

PLEASE WAIT…

- Data on the disc is being recovered.

Wait until this message disappears

before resuming use.

the screen). Delete some recordings

(DVD-RW in VR mode) to free some

space (

33) or replace the disc.

DISC IS FINALIZED

CANNOT RECORD

- You cannot record additional scenes on

a finalized DVD-R/DVD-R DL disc.

- You cannot record additional scenes or

unfinalize a DVD-RW disc in VIDEO

TASK IN PROGRESS DO NOT

DISCONNECT THE POWER SOURCE

- The camcorder is updating important

file allocation data on the disc. Do not

disconnect the compact power adapter

or remove the battery pack.

Additional Information • 71

• TEMPERATURE TOO HIGH CANNOT

RECORD

• TEMPERATURE TOO HIGH CANNOT

REMOVE DISC

- The camcorder has exceeded its

operational temperature. Disconnect

the compact power adapter and

remove the battery and let the

camcorder cool down before resuming

use.

UNABLE TO RECOGNIZE THE DATA

- The disc may not be recognized by this

camcorder if it was initialized with a

different device.

- You inserted a disc recorded in a

different Television System (NTSC).

UNABLE TO RECOVER DATA

- Could not recover a corrupted file.

- This message can also appear if

condensation has formed. If you

suspect condensation is the reason, do

not initialize the disc and wait until the

camcorder dries completely before

resuming use (

76).

UNFINALIZE THE DISC

- You cannot record additional scenes on

a finalized DVD-RW in VIDEO mode.

Unfinalize the disc first (

46).

USE OF A RECOMMENDED DISC IS

ADVISED

- The disc can be used but performance

is not guaranteed. We recommend that

you use a disc that has been tested

(

4).

72 • Additional Information

Do’s and Don’ts

or vibration as this may cause

damage.

Handling Precautions

Camcorder

Battery Pack

• Do not touch the pick up lens.

• Do not subject the camcorder to

vibrations or strong impacts while the

DISC access indicator is on or

flashing. The data may not be

correctly recorded on the disc, and

the recording may be permanently

lost.

• Do not carry the camcorder by the

LCD panel or the disc cover. Be

careful when closing the LCD panel.

• Do not leave the camcorder in places

subject to high temperatures (like the

inside of a car under direct sunlight),

or high humidity.

DANGER!

Treat the battery pack with care.

• Keep it away from fire (or it might

explode).

• Do not expose the battery pack to

temperature higher than 60 °C. Do

not leave it near a heater or inside a

car in hot weather.

• Do not try to disassemble or modify

it.

• Do not drop it or subject it to

shocks.

• Do not get it wet.

• Charged battery packs continue to

discharge naturally. Therefore, charge

them on the day of use, or the day

before, to ensure a full charge.

• Contact of the battery pack terminals

with metallic objects may cause a

short circuit and damage the battery

pack.

• Dirty terminals may cause a poor

contact between the battery pack and

the camcorder. Wipe the terminals

with a soft cloth.

• Do not use the camcorder near strong

electromagnetic fields such as above

TVs, near plasma TVs or mobile

phones.

• Do not point the lens or viewfinder at

strong light sources. Do not leave the

camcorder pointed at a bright subject.

• Do not use or store the camcorder in

dusty or sandy places. The camcorder

is not waterproof – avoid also water,

mud or salt. If any of the above should

get into the camcorder it may damage

the camcorder and/or the lens. Be

sure to close the disc compartment

cover after use.

• Since storing a charged battery pack

for a long time (about 1 year) can

shorten its lifecycle or affect

performance, we recommend to

discharge the battery pack fully and to

store it in a dry place at temperatures

no higher than 30 °C. If you do not use

the battery pack for long periods,

charge and discharge it fully at least

once a year. If you have more than one

battery pack, perform these

• Be careful of heat generated by

lighting equipment.

• Do not disassemble the camcorder. If

the camcorder does not function

properly, consult qualified service

personnel.

• Handle the camcorder with care. Do

not subject the camcorder to shocks

Additional Information • 73

precautions at the same time for all

battery packs.

• Do not bend, scratch or wet the disc

and do not subject it to strong shocks.

• Do not attach any labels or stickers on

the disc surfaces. The disc may not

rotate in a stable manner and this may

cause malfunctions.

• Keep the disc clean of dust, dirt or

smudges. Even very small smudges or

particles of dust can lead to problems

when recording or playing back the

disc. Carefully inspect the recording

surface of the disc before inserting it

in the camcorder. If the disc gets dirty

use a dry, soft lens-cleaning cloth to

remove any fingerprints, dirt buildup

or smudges from the disc surface.

Clean the disc in a radial motion from

its center outwards.

• Although the battery pack’s operating

temperature range is from 0 °C to

40 °C, the optimal range is from 10 °C

to 30 °C. At cold temperatures,

performance will temporarily decline.

Warm it in your pocket before use.

• Replace the battery pack if the usable

time after full charge diminishes

substantially at normal temperatures.

About the battery terminal cover

The battery terminal cover has a [

shaped hole. This is useful when you

wish to differentiate between charged

and uncharged battery packs.

• Never use a chemically treated cloth

or flammable solvents such as paint

thinner to clean the disc.

• To protect the disc, return it to its case

for storage.

• When writing on the label side of the

disc, avoid hard tip pens. Use

waterproof soft-tipped felt pens

instead.

Back side of the battery pack

Terminal cover attached

• Moving a disc rapidly between hot

and cold temperatures may cause

condensation to form on its surfaces.

If condensation forms on the disc, put

it aside until the water droplets have

evaporated completely.

• Never expose the disc to direct

sunlight and do not store it in places

subject to high temperatures or high

humidity.

Uncharged

Charged

Mini DVD Disc

The recording surface of DVD discs is

extremely delicate. If handled or stored

in an incorrect manner, the camcorder

may stop recognizing or may not be

able to play back the disc. Be sure to

observe the following precautions when

storing/handling your discs.

• Always finalize a disc before inserting

it into an external DVD device. Failing

to do so can result in the loss of the

recorded data.

• Always remove the disc from the

camcorder after you finish

recording.

Do not store the camcorder with a

disc left inside.

74 • Additional Information

Memory Card

Built-in Rechargeable Lithium Battery

• We recommend saving backups of

memory card images on your

The camcorder has a built-in

rechargeable lithium battery to keep the

date/time and other settings. The built-

in lithium battery is recharged while you

use the camcorder; however, it will

become totally discharged if you do not

use the camcorder for about 3 months.

To recharge the built-in lithium battery:

Connect the compact power adapter to

the camcorder and leave it connected

computer by using a memory card

reader/writer or inserting the memory

card in your computer’s memory card

slot. Image data may be corrupted or

lost due to memory card defects or

exposure to static electricity. Canon

makes no warranties for corrupted or

lost data.

• Do not turn off the camcorder,

disconnect the power source or

remove the memory card while the

CARD access indicator is flashing.

• Do not use memory cards in places

subject to strong magnetic fields.

• Do not leave memory cards in places

subject to high humidity and high

temperature.

for 24 hours with the

switch set to

• Do not disassemble, bend, drop, or

subject memory cards to shocks and

do not expose them to water.

• Do not touch or expose the terminals

to dust or dirt.

• Check the direction before inserting

the memory card. Forcing a memory

card into the slot if it is not correctly

oriented may damage the memory

card or the camcorder.

• Do not attach any labels or stickers on

the memory card.

• When you erase image files or initialize

the memory card, only the file

allocation table is altered and the data

itself is not actually deleted. Take the

necessary precautions when you

dispose of the memory card, for

example by physically damaging it to

prevent the leakage of private data.

Additional Information • 75

Condensation

Maintenance/Others

Moving the camcorder rapidly between

hot and cold temperatures may cause

condensation (water droplets) to form

on its internal surfaces. Stop using the

camcorder if condensation is detected.

Continued use may damage the

camcorder.

Storage

If you do not intend to use the

camcorder for a long time, store it in a

place free of dust, in low humidity, and

at temperatures not higher than 30 °C.

Condensation may form in the following

cases:

• When the camcorder is moved from

an air-conditioned room to a warm,

humid place

• When the camcorder is moved from a

cold place to a warm room

• When the camcorder is left in a humid

room

Cleaning

Camcorder Body

• Use a soft, dry cloth to clean the

camcorder body. Never use

chemically treated cloths or volatile

solvents such as paint thinner.

• When a cold room is heated rapidly

TO AVOID CONDENSATION

Pick Up Lens

• Do not expose the camcorder to

sudden or extreme changes in

temperature.

• Unload the disc, place the camcorder

in an airtight plastic bag and let it

adjust to temperature changes slowly

before removing it from the bag.

• Remove any dust or dirt particles

using a non-aerosol type blower

brush. Never touch the pick up lens

directly to clean it.

Lens and Viewfinder

• If the lens surface is dirty, the

autofocus may not work properly.

• Remove any dust or dirt particles

using a non-aerosol type blower

brush.

• Use a clean, soft lens-cleaning cloth

to gently wipe the lens or viewfinder.

Never use tissue paper.

WHEN CONDENSATION IS DETECTED

• If a disc is loaded, remove the disc

immediately and leave the disc cover

open. Leaving the disc in the

camcorder may damage it.

• A disc cannot be loaded when

condensation is detected.

LCD Screen

• Clean the LCD screen using a clean,

soft lens-cleaning cloth.

• Condensation may form on the

surface of the screen when the

temperature changes suddenly. Wipe

it with a soft dry cloth.

76 • Additional Information

Playback on a TV Screen

RESUMING USE

You can only play back your recordings

on TVs compatible with the PAL system.

The PAL system is used in the following

countries/areas:

Algeria, Australia, Austria, Bangladesh,

Belgium, Brunei, China, Croatia, Czech

Republic, Denmark, Finland, Germany,

Hong Kong Special Administrative

Region, Iceland, India, Indonesia, Iran,

Iraq, Ireland, Israel, Italy, Jordan, Kenya,

Kuwait, Liberia, Malaysia, Malta,

Montenegro, Mozambique, the

The precise time required for water

droplets to evaporate will vary

depending on the location and weather

conditions. As a general rule, wait for

2 hours before resuming use of the

camcorder.

Using the Camcorder Abroad

Netherlands, New Zealand, North Korea,

Norway, Oman, Pakistan, Poland,

Portugal, Qatar, Romania, Serbia, Sierra

Leone, Singapore, Slovakia, Slovenia,

South Africa, Spain, Sri Lanka,

Swaziland, Sweden, Switzerland,

Tanzania, Thailand, Turkey, Uganda,

Ukraine, United Arab Emirates, United

Kingdom, Yemen, Zambia.

Power Sources

You can use the compact power adapter

to operate the camcorder and to charge

battery packs in any country with power

supply between 100 and 240 V AC, 50/

60 Hz. Consult a Canon Service Center

for information on plug adapters for

overseas use.

Trademark Acknowledgements

• The SD logo is a trademark. The SDHC logo is a trademark.

•

is a trademark of DVD Format/Logo Licensing Corporation.

• Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

• Other names and products not mentioned above may be trademarks or registered trademarks of their

respective companies.

• ANY USE OF THIS PRODUCT OTHER THAN CONSUMER PERSONAL USE IN ANY MANNER THAT

COMPLIES WITH THE MPEG-2 STANDARD FOR ENCODING VIDEO INFORMATION FOR PACKAGED MEDIA

IS EXPRESSLY PROHIBITED WITHOUT A LICENSE UNDER APPLICABLE PATENTS IN THE MPEG-2 PATENT PORTFOLIO, WHICH LICENSE

IS AVAILABLE FROM MPEG LA, L.L.C., 250 STEELE STREET, SUITE 300, DENVER, COLORADO 80206.

Additional Information • 77

General Information

System Diagram

System Diagram (Availability differs from area to area)

WS-20

Wrist Strap

CBC-NB2

NB-2LH, BP-2L13,

Car Battery Charger

BP-2L14, BP-2L24H

SS-600/SS-650

Battery Pack

Shoulder Strap

CB-2LWE

Battery Charger

Mini DVD disc

DVD-R/DVD-RW/

DVD-R DL

CA-570 Compact

Power Adapter

SCART

adapter

STV-250N Stereo

Video Cable

VCR

DVD player/recorder

PictBridge-

compatible printers

SD/SDHC

memory card

Card adapter

Card reader/writer

MultiMedia

Card

Computer

SC-2000

Soft Carrying Case

Mini DVD disc

DVD-R/DVD-RW/DVD-R DL

Compatible

DVD player/recorder

78 • Additional Information

Optional Accessories

Use of genuine Canon accessories is recommended.

This product is designed to achieve excellent performance when used with genuine

Canon accessories. Canon shall not be liable for any damage to this product and/or

accidents such as fire, etc., caused by the malfunction of non-genuine Canon

accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this

warranty does not apply to repairs arising out of the malfunction of non-genuine Canon

accessories, although you may request such repairs on a chargeable basis.

Battery Packs

When you need extra battery packs, select

one of the following models: NB-2LH,

BP-2L13, BP-2L14 or BP-2L24H*.

* Attaching the BP-2L24H battery pack will make

using the viewfinder more difficult.

CB-2LWE Battery Charger

Use the battery charger to charge the

battery packs.

Charging Times

The charging times given in the following table are approximate and vary according

to charging conditions and initial charge of the battery pack.

Battery pack →

NB-2LH

BP-2L13

BP-2L14

BP-2L24H

Charging conditions ↓

Using the camcorder

135 min.

105 min.

225 min.

175 min.

240 min.

195 min.

370 min.

330 min.

Using the CB-2LWE Battery Charger

Recording and Playback Times

The recording and playback times given in the following table are approximate and

vary according to recording mode and charging, recording or playback conditions.

The effective usage time of the battery pack may decrease when recording in cold

surroundings, when using the brighter screen settings, etc.

Additional Information • 79

Battery

pack

NB-2LH

BP-2L13

BP-2L14

BP-2L24H

Screen

used

Viewfinder

LCD

Viewfinder

LCD

Viewfinder

LCD

Viewfinder

LCD

Maximum Recording Time

105 min. 100 min. 185 min.

125 min. 125 min. 225 min.

135 min. 130 min. 235 min.

180 min.

215 min.

230 min.

220 min.

265 min.

285 min.

215 min.

260 min.

275 min.

375 min.

440 min.

470 min.

365 min.

430 min.

455 min.

Typical Recording Time*

60 min.

65 min.

70 min.

60 min.

65 min.

110 min.

115 min.

135 min.

130 min.

135 min.

140 min.

220 min.

230 min.

240 min.

215 min.

225 min.

235 min.

115 min.

120 min.

140 min.

145 min.

115 min.

Playback Time

245 min.

–

140 min.

170 min.

185 min.

–

290 min.

355 min.

385 min.

–

495 min.

590 min.

635 min.

300 min.

320 min.

Battery

pack

NB-2LH

BP-2L13

BP-2L14

BP-2L24H

Screen

used

Viewfinder

LCD

Viewfinder

LCD

Viewfinder

LCD

Viewfinder

LCD

Maximum Recording Time

110 min. 105 min. 195 min.

130 min. 125 min. 230 min.

135 min. 135 min. 240 min.

190 min.

220 min.

235 min.

270 min.

290 min.

230 min.

265 min.

280 min.

385 min.

445 min.

475 min.

380 min.

435 min.

465 min.

Typical Recording Time*

60 min.

65 min.

70 min.

60 min.

65 min.

110 min.

115 min.

135 min.

130 min.

140 min.

145 min.

220 min.

235 min.

240 min.

215 min.

230 min.

235 min.

120 min.

125 min.

145 min.

120 min.

Playback Time

250 min.

–

145 min.

170 min.

185 min.

–

295 min.

355 min.

390 min.

–

505 min.

590 min.

640 min.

300 min.

325 min.

* Approximate times for recording with repeated operations such as start/stop, zooming, and

power on/off.

80 • Additional Information

CBC-NB2 Car Battery Charger

Use the car battery charger to charge

battery packs while you are on the go. The

car battery cable plugs into your car's

cigarette lighter and runs off a 12-24 V DC

negative ground battery.

Shoulder Strap

You can attach a shoulder strap for more

security and portability.

Pass the ends through the strap mount and

adjust the length of the strap.

WS-20 Wrist Strap

Use this for extra additional protection for

active shooting.

SC-2000 Soft Carrying Case

A handy camcorder bag with padded

compartments and plenty of space for

accessories.

This mark identifies genuine Canon video accessories. When

you use Canon video equipment, we recommend Canon-

brand accessories or products bearing the same mark.

Additional Information • 81

Specifications

DC320/DC311/DC310/DC301

System

Disc Recording System

DVD-VIDEO (all disc types)

DVD-VR (only with DVD-RW discs)

Video Compression: MPEG-2

Audio Compression: Dolby Digital 2ch

Television System

Compatible Media

CCIR standard (625 lines, 50 fields) PAL color signal

8 cm mini DVD discs marked with

the DVD-R, DVD-R DL or DVD-RW logo

Maximum Recording Time

1.4 GB single sided 8 cm mini DVD disc:

XP: 20 min., SP: 30 min., LP: 60 min.

2.6 GB single sided dual-layered 8 cm mini DVD disc:

XP: 36 min., SP: 54 min., LP: 108 min.

(All times given are approximate figures)

Image Sensor

1/6-inch CCD, approx. 1,070,000 pixels

Effective pixels (all figures are approximate values)

16:9 Movies (advanced zoom)

(other zoom types)

480,000 (T) / 710,000 (W) pixels

550,000 pixels

4:3 Movies (advanced zoom)

(other zoom types)

440,000 (T) / 690,000 (W) pixels

690,000 pixels

16:9 Still images

600,000 pixels

4:3 Still images

800,000 pixels

1/6-inch CCD, approx. 800,000 pixels

Effective pixels (all figures are approximate values)

16:9 Movies (advanced zoom)

(other zoom types)

4:3 Movies

440,000 (T) / 540,000 (W) pixels

440,000 pixels

400,000 pixels

530,000 pixels

Still images

LCD Screen

Viewfinder

Microphone

2.7 in., wide, TFT color, approx. 112,000 pixels

0.35 in., wide, TFT color, approx. 114,000 pixels

Stereo electret condenser microphone

82 • Additional Information

Lens

f=2.6-96.2 mm, F/2.0-5.2, 37x power zoom

35 mm equivalent (all figures are approximate values)

16:9 Movies (advanced zoom)

(other zoom types)

4:3 Movies (advanced zoom)

(other zoom types)

16:9 Still images

4:3 Still images

41.7-1,877 mm

47.1-1,743 mm

44.6-2,052 mm

44.6-1,650 mm

45.2-1,672 mm

41.5-1,536 mm

f=2.6-96.2 mm, F/2.0-5.2, 37x power zoom

35 mm equivalent (all figures are approximate values)

16:9 Movies (advanced zoom)

(other zoom types)

4:3 Movies

40.5-1,676 mm

45.3-1,676 mm

49.8-1,843 mm

43.6-1,613 mm

Still images

f=2.6-83.2 mm, F/2.0-4.6, 32x power zoom

35 mm equivalent (all figures are approximate values)

16:9 Movies (advanced zoom)

(other zoom types)

4:3 Movies

40.5-1,450 mm

45.3-1,450 mm

49.8-1,594 mm

43.6-1,395 mm

Still images

Lens Configuration

AF System

10 elements in 8 groups (1 double-sided, aspheric element)

TTL autofocus, manual focus available

Minimum Focusing Distance

White Balance

1 m; 1 cm on maximum wide angle

Auto white balance, preset white balance (DAYLIGHT, TUNGSTEN) or custom white

balance

Minimum Illumination

[NIGHT] recording program, Shutter speed at 1/6:

1.6 lx,

1.1 lx

mode, Auto slow shutter [ON], Shutter speed at 1/25:

6.5 lx,

More than 100 lx

Electronic

4.5 lx

Recommended Illumination

Image Stabilization

When two values are given, the first indicates the value at full telephoto (T) and the second indicates the value at full wide-angle (W).

Memory Card

Recording Media

SDHC (SD High Capacity) memory card, SD memory card, MultiMedia Card (MMC)*

Size of Still Images

1,152 x 648 / 1,152 x 864 / 640 x 480 pixels

1,024 x 768 / 640 x 480 pixels

File Format

Design rule for Camera File system (DCF), Exif 2.2 compliant , DPOF compliant

Image Compression Method

JPEG (compression: Super Fine, Fine, Normal)

This camcorder has been tested with SD/SDHC cards up to 8 GB. Performance cannot be guaranteed for all memory cards.

This camcorder supports Exif 2.2 (also called “Exif Print”). Exif Print is a standard for enhancing the communication between

camcorders and printers. By connecting to an Exif Print-compliant printer, the camcorder’s image data at the time of shooting is

used and optimized, yielding extremely high quality prints.

Additional Information • 83

Terminals

AV Terminal

∅ 3.5 mm minijack, output only

Video: 1 Vp-p/75 ohms unbalanced

Audio: -10 dBV (47 kohms load/3 kohms or less)

Power/Others

Power supply (rated)

7.4 V DC (battery pack), 8.4 V DC (compact power adapter)

Power consumption (SP mode)

Operating temperature

Dimensions (W x H x D)

Weight (camcorder body only)

2.3 W (viewfinder), 2.4 W (LCD screen, normal brightness)

0 – 40 °C

66 x 90 x 126 mm excluding the grip belt

380 g

CA-570 Compact Power Adapter

Power supply

100 – 240 V AC, 50/60 Hz

Rated output / consumption

Operating temperature

Dimensions

8.4 V DC, 1.5 A / 29 VA (100 V) – 39 VA (240 V)

0 – 40 °C

52 x 29 x 90 mm

135 g

Weight

NB-2LH Battery Pack

Battery type

Rechargeable Lithium Ion Battery

Rated voltage

Operating temperature

Battery capacity

Dimensions

7.4 V DC

0 – 40 °C

720 mAh

33.3 x 16.2 x 45.2 mm

43 g

Weight

Weight and dimensions are approximate. Errors and omissions excepted. Subject to

change without notice.

84 • Additional Information

Erasing still images . . . . . . . . . . . . . . . . 52

Error messages . . . . . . . . . . . . . . . . . . . 70

Exposure . . . . . . . . . . . . . . . . . . . . . . . . 39

Index

Finalizing the disc . . . . . . . . . . . . . . . . . 45

Fireworks (recording program) . . . . . . . 35

Focus priority. . . . . . . . . . . . . . . . . . . . . 54

FUNC. menu . . . . . . . . . . . . . . . . . . 19, 60

Abroad, using the camcorder. . . . . . . . .77

AEB* - Auto exposure bracketing . . . . .53

Aspect ratio

of a connected TV (TV Type) . . . . . .65

of movies (Widescreen) . . . . . . . . . .63

Auto slow shutter . . . . . . . . . . . . . . . . . .62

Autofocus (AF): AF frame

Grip belt. . . . . . . . . . . . . . . . . . . . . . . . . 17

(9-point AiAF/Center point) . . . . . . .54

AV terminal . . . . . . . . . . . . . . . . . . . . . . .58

Image effects. . . . . . . . . . . . . . . . . . . . . 40

Image jump . . . . . . . . . . . . . . . . . . . . . . 50

Image stabilizer . . . . . . . . . . . . . . . . . . . 62

Index screen

Movies . . . . . . . . . . . . . . . . . . . . . . 31

Still images . . . . . . . . . . . . . . . . . . . 51

Initialization

Battery pack

Charging . . . . . . . . . . . . . . . . . . . . .16

Remaining charge indicator. . . . . . .15

Beach (recording program). . . . . . . . . . .35

Beep. . . . . . . . . . . . . . . . . . . . . . . . . . . .65

Built-in backup battery. . . . . . . . . . . . . .75

Disc. . . . . . . . . . . . . . . . . . . . . . . . . 44

Memory card. . . . . . . . . . . . . . . . . . 56

Compact power adapter . . . . . . . . . . . .16

Condensation. . . . . . . . . . . . . . . . . . . . .76

Connections to a TV/VCR . . . . . . . . . . .58

Continuous shooting*. . . . . . . . . . . . . . .53

Joystick . . . . . . . . . . . . . . . . . . . . . . . . . 18

Joystick guide . . . . . . . . . . . . . . . . . . . . 18

Language. . . . . . . . . . . . . . . . . . . . . . . . 21

LCD screen . . . . . . . . . . . . . . . . . . . . . . 22

LCD video light . . . . . . . . . . . . . . . . . . . 37

LP mode . . . . . . . . . . . . . . . . . . . . . . . . 28

Data code. . . . . . . . . . . . . . . . . . . . . . . .33

Date and time. . . . . . . . . . . . . . . . . . . . .21

Date format . . . . . . . . . . . . . . . . . . .66

Daylight saving time . . . . . . . . . . . .22

Time zone . . . . . . . . . . . . . . . . . . . .22

Digital effects . . . . . . . . . . . . . . . . . . . . .41

Disc title . . . . . . . . . . . . . . . . . . . . . . . . .44

Disc types

Magnifying a still image. . . . . . . . . . . . . 52

Maintenance . . . . . . . . . . . . . . . . . . . . . 76

Manual exposure adjustment . . . . . . . . 39

Manual focus. . . . . . . . . . . . . . . . . . . . . 38

Markers . . . . . . . . . . . . . . . . . . . . . . . . . 64

Memory card . . . . . . . . . . . . . . . . . . 25, 75

Mode switch . . . . . . . . . . . . . . . . . . . . . 26

(DVD-R, DVD-R DL, DVD-RW). . . . . .3

Discs that have been tested. . . . . . . . . . .4

Drive mode* . . . . . . . . . . . . . . . . . . . . . .53

EASY (recording program) . . . . . . . . . . .27

Night (recording program) . . . . . . . . . . . 35

only

Additional Information • 85

Still image quality . . . . . . . . . . . . . . . . . 49

Still image size . . . . . . . . . . . . . . . . . . . 49

Sunset (recording program) . . . . . . . . . 35

Onscreen display selection . . . . . . . . . . 33

Original recordings. . . . . . . . . . . . . . . . . 42

Telephoto . . . . . . . . . . . . . . . . . . . . . . . 29

Tripod . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Troubleshooting . . . . . . . . . . . . . . . . . . 67

Tv (recording program) . . . . . . . . . . . . . 36

P (recording program) . . . . . . . . . . . . . . 36

Playback

Movies. . . . . . . . . . . . . . . . . . . . . . . 31

Still images . . . . . . . . . . . . . . . . . . . 50

Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Portrait (recording program) . . . . . . . . . 35

Power save . . . . . . . . . . . . . . . . . . . . . . 65

Print order . . . . . . . . . . . . . . . . . . . . . . . 57

Printing still images . . . . . . . . . . . . . . . . 57

Protecting still images . . . . . . . . . . . . . . 55

VIDEO mode (disc specification) . . . . . . 3

Viewfinder . . . . . . . . . . . . . . . . . . . . . . . 27

Volume . . . . . . . . . . . . . . . . . . . . . . . . . 32

VR mode (disc specification) . . . . . . . . . 3

White balance . . . . . . . . . . . . . . . . . . . . 39

Wide angle . . . . . . . . . . . . . . . . . . . . . . 29

Widescreen 16:9 . . . . . . . . . . . . . . . . . . 63

Wind screen . . . . . . . . . . . . . . . . . . . . . 63

Quick Start function. . . . . . . . . . . . . . . . 29

Recording

Movies. . . . . . . . . . . . . . . . . . . . . . . 26

Still images . . . . . . . . . . . . . . . . . . . 48

Recording mode . . . . . . . . . . . . . . . . . . 28

Recording programs . . . . . . . . . . . . . . . 36

Recording reminder . . . . . . . . . . . . . . . . 15

RESET . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Reviewing

XP mode . . . . . . . . . . . . . . . . . . . . . . . . 28

Zoom

Advanced zoom . . . . . . . . . . . . . . . 28

Zoom speed. . . . . . . . . . . . . . . . . . 29

Zoom type . . . . . . . . . . . . . . . . . . . 28

Movies (Record review). . . . . . . . . . 30

Still images (Review) . . . . . . . . . . . . 62

Scene editing. . . . . . . . . . . . . . . . . . . . . 42

Screen icons . . . . . . . . . . . . . . . . . . . . . 13

SD/SDHC card. . . . . . . . . . . . . . . . . . . . 25

Self timer . . . . . . . . . . . . . . . . . . . . . . . . 37

Serial number. . . . . . . . . . . . . . . . . . . . . 11

Setup menus . . . . . . . . . . . . . . . . . . 20, 62

Shutter speed . . . . . . . . . . . . . . . . . . . . 36

Slideshow . . . . . . . . . . . . . . . . . . . . . . . 51

Snow (recording program) . . . . . . . . . . . 35

SP mode . . . . . . . . . . . . . . . . . . . . . . . . 28

Special scene (recording programs) . . . 34

Sports (recording program) . . . . . . . . . . 35

Spotlight (recording program) . . . . . . . . 35

86 • Additional Information

Canon Europa N.V.

P.O. Box 2262, 1180 EG Amstelveen, The Netherlands

Canon UK Ltd.

CCI Service Centre, Unit 130

Centennial Park, Borehamwood, Hertfordshire, WD6 3SE, England

Telephone 0870-241-2161

Canon Australia Pty. Ltd.

Info-Line: 131383

www.canon.com.au

Canon New Zealand Ltd.

Customer Care: (09) 489 0470

www.canon.co.nz

Canon Singapore Pte. Ltd

1 HarbourFront Avenue, #04-01 Keppel Bay Tower, Singapore 098632

Tel: (65) 6799 8888

Fax: (65) 6799 8882

Canon Hongkong Company Ltd

19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom,

Kowloon, Hong Kong

Canon Latin America, Inc.

Sales & Enquiries: 703 Waterford Way Suite 400 Miami, FL 33126 USA

The information on this manual is verified as of 1 January 2008.

0116W293

PUB. DIE-304

Audiovox Jensen JPA1300M User Manual
Blaupunkt Essen CD31 User Manual
Campbell Hausfeld PW2675 User Manual
Crown Boiler AWI295 User Manual
Dell XLH1 User Manual
Earthquake Sound RCS 650 User Manual
Hitachi Camcorder VN 7380E User Manual
Hypertec Notebook Case N15968PHY User Manual
JVC 0809DTSMDTJEIN User Manual
JVC GR AXM33 User Manual