FujiFilm FinePix XP20 User Manual

BL01299-201

DIGITAL CAMERA

Before You Begin

First Steps

FINEPIX XP20 Series

Basic Photography and Playback

More on Photography

More on Playback

Movies

Owner’s Manual

Thank you for your purchase

of this product. This manual

describes how to use your

FUJIFILM digital camera and the

supplied software. Be sure that

you have read and understood

its contents and the warnings in

“ForYour Safety”(Pii) before us-

ing the camera.

Connections

Menus

For information on related products, visit our website at

http://www.fujifilm.com/products/digital_cameras/index.html

Technical Notes

Troubleshooting

Appendix

For Your Safety

If the video product does not operate nor-

mally follow the operating instructions. Ad-

just only those controls that are covered by

the operating instructions as an improper

adjustment of other controls may result in

damage and will often require extensive work

by a qualiﬁed technician to restore the video

product to its normal operation.

Antennas

Use

Outdoor Antenna Grounding: If an outside Cleaning: Unplug this video product from the

antenna or cable system is connected to the wall outlet before cleaning. Do not use liq-

video product, be sure the antenna or cable uid cleaners or aerosol cleaners. Use a damp

system is grounded so as to provide some cloth for cleaning.

protection against voltage surges and built-

up static charges. Section 810 of the National

Object and Liquid Entry: Never push objects

of any kind into this video product through

Electrical Code, ANSI/NFPA No. 70, provides

openings as they may touch dangerous volt-

information with respect to proper ground-

age points or short out parts that could result

When the video product exhibits a distinct

ing of the mast and supporting structure,

in a ﬁre or electric shock. Never spill liquid

change in performance—this indicates

need for service.

grounding of the lead-in wire to an antenna

of any kind on the video product (excluding

discharge unit, size of grounding conductors,

waterproof products).

Replacement Parts: When replacement parts

are required, be sure the service technician

has used replacement parts speciﬁed by the

manufacturer or have the same characteris-

tics as the original part. Unauthorized sub-

stitutions may result in ﬁre, electric shock or

other hazards.

location of antenna discharge unit, connec-

Lightning: For added protection for this video

product receiver during a lightning storm, or

when it is left unattended and unused for long

periods of time, unplug it from the wall outlet

and disconnect the antenna or cable system.

This will prevent damage to the video product

due to lightning and power-line surges.

tion to grounding electrodes, and require-

ments for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

Ground Clamp

Antenna Lead

in Wire

Safety Check: Upon completion of any service

or repairs to this video product, ask the ser-

vice technician to perform safety checks to

determine that the video product is in proper

operating condition.

Service

Antenna

Electric Service

Equipment

Servicing: Do not attempt to service this video

product yourself as opening or removing cov-

ers may expose you to dangerous voltage or

other hazards. Refer all servicing to qualiﬁed

service personnel.

Discharge Unit

(NEC SECTION

810-20)

Ground Clamps

Grounding

Conductors

(NEC SECTION

810-21)

Damage Requiring Service: Unplug this video

product from the wall outlet and refer servic-

ing to qualiﬁed service personnel under the

following conditions:

Power Service Grounding

Electrode System (NEC ART

250. PART H)

Power Lines: An outside antenna system • When the power-supply cord or plug is

should not be located in the vicinity of over-

damaged.

head power lines or other electric light or • If liquid has been spilled, or objects have

power circuits, or where it can fall into such

fallen into the video product.

power lines or circuits. When installing an • If the video product has been exposed to

outside antenna system, extreme care should

be taken to keep from touching such power

rain or water (excluding waterproof prod-

ucts).

lines or circuits as contact with them might • If the video product has been dropped or

be fatal.

the cabinet has been damaged.

iii

For Your Safety

Be sure to read these notes before use

WARNING

Safety Notes

Do not use the camera in the bathroom or shower (excluding water-

proof products). This can cause a ﬁre or electric shock.

• Make sure that you use your camera correctly. Read these safety

notes and your Owner’s Manual carefully before use.

Do not use in

the bathroom or

shower

• After reading these safety notes, store them in a safe place.

Never attempt to change or take apart the camera (never open

the case). Failure to observe this precaution can cause ﬁre or

electric shock.

About the Icons

The icons shown below are used in this document to indicate the

severity of the injury or damage that can result if the information

indicated by the icon is ignored and the product is used incorrectly

as a result.

Do not

disassemble

Should the case break open as the result of a fall or other accident,

do not touch the exposed parts. Failure to observe this precau-

tion could result in electric shock or in injury from touching the

damaged parts. Remove the battery immediately, taking care

to avoid injury or electric shock, and take the product to the

point of purchase for consultation.

Do not touch

internal parts

This icon indicates that death or serious injury can result if the

information is ignored.

WARNING

Do not change, heat or unduly twist or pull the connection cord and

do not place heavy objects on the connection cord. These actions

could damage the cord and cause a ﬁre or electric shock. If the

cord is damaged, contact your FUJIFILM dealer.

This icon indicates that personal injury or material damage can

result if the information is ignored.

CAUTION

The icons shown below are used to indicate the nature of the instruc-

tions which are to be observed.

Do not place the camera on an unstable surface. This can cause the

camera to fall or tip over and cause injury.

Never attempt to take pictures while in motion. Do not use the

camera while you are walking or driving a vehicle. This can re-

sult in you falling down or being involved in a traﬃc accident.

Triangular icons tell you that this information requires atten-

tion (“Important”).

Circular icons with a diagonal bar tell you that the action indi-

cated is prohibited (“Prohibited”).

Do not touch any metal parts of the camera during a thunderstorm.

This can cause an electric shock due to induced current from

the lightning discharge.

Filled circles with an exclamation mark indicate an action that

must be performed (“Required”).

Do not use the battery except as speciﬁed. Load the battery as

shown by the indicator.

WARNING

Do not heat, change or take apart the battery. Do not drop or subject

the battery to impacts. Do not store the battery with metallic prod-

ucts. Any of these actions can cause the battery to burst or leak

and cause ﬁre or injury as a result.

If a problem arises, turn the camera oﬀ, remove the battery, and

disconnect and unplug the AC power adapter. Continued use of

the camera when it is emitting smoke, is emitting any unusual

Unplug from

power socket

odor, or is in any other abnormal state can cause a ﬁre or elec-

tric shock. Contact your FUJIFILM dealer.

Use only the battery or AC power adapters speciﬁed for use with this

camera. Do not use voltages other than the power supply voltage

shown. The use of other power sources can cause a ﬁre.

If the battery leaks and ﬂuid gets in contact with your eyes, skin or

clothing, ﬂush the aﬀected area with clean water and seek medical

attention or call an emergency number right away.

Do not allow water or foreign objects to enter the camera. If water

or foreign objects get inside the camera, turn the camera oﬀ,

remove the battery, and disconnect and unplug the AC power

adapter. Continued use of the camera can cause a ﬁre or elec-

tric shock. Contact your FUJIFILM dealer.

For Your Safety

WARNING

CAUTION

Do not use the charger to charge batteries other than those speci-

ﬁed here. The supplied battery charger is for use only with the

type of battery supplied with the camera. Using the charger to

charge conventional batteries or other types of rechargeable

batteries can cause the battery to leak ﬂuid, overheat or burst.

Do not cover or wrap the camera or the AC power adapter in a cloth

or blanket. This can cause heat to build up and distort the cas-

ing or cause a ﬁre.

When you are cleaning the camera or you do not plan to use the

camera for an extended period, remove the battery and disconnect

and unplug the AC power adapter. Failure to do so can cause a

ﬁre or electric shock.

When carrying the battery, install it in a digital camera or keep it

in the hard case. When storing the battery, keep it in the hard case.

When discarding, cover the battery terminals with insulation tape.

Contact with other metallic objects or batteries could cause

the battery to ignite or burst.

When charging ends, unplug the charger from the power socket.

Leaving the charger plugged into the power socket can cause

a ﬁre.

Unplug from

power socket

Keep memory cards out of the reach of small children. Because

memory cards are small, they can be swallowed by children.

Be sure to store memory cards out of the reach of small chil-

dren. If a child swallows a memory card, seek medical atten-

tion or call an emergency number.

Using a ﬂash too close to a person’s eyes may temporarily aﬀect the

eyesight. Take particular care when photographing infants and

young children.

When a memory card is removed, the card could come out of the slot

too quickly. Use your ﬁnger to hold it and gently release the card.

Injury could result to those struck by the ejected card.

CAUTION

Request regular internal testing and cleaning for your camera.

Build-up of dust in your camera can cause a ﬁre or electric

shock. Contact your FUJIFILM dealer to request internal clean-

ing every two years. Please note that this service is not free

of charge.

Do not use this camera in locations aﬀected by oil fumes or steams.

This can cause a ﬁre or electric shock.

Do not use this camera in locations aﬀected by humidity or dust

(excluding waterproof products). This can cause a ﬁre or elec-

tric shock.

Do not leave this camera in places subject to extremely high temper-

atures. Do not leave the camera in locations such as a sealed

vehicle or in direct sunlight. This can cause a ﬁre.

Keep out of the reach of small children. This product could cause

injury in the hands of a child.

Do not place heavy objects on the camera. This can cause the

heavy object to tip over or fall and cause injury.

Do not move the camera while the AC power adapter is still connect-

ed. Do not pull on the connection cord to disconnect the AC power

adapter. This can damage the power cord or cables and cause

a ﬁre or electric shock.

Do not use the AC power adapter when the plug is damaged or the

plug socket connection is loose. This could cause a ﬁre or electric

shock.

For Your Safety

■ Charging the Battery

■ Cautions: Handling the Battery

The Battery and Power Supply

Charge the battery in the supplied battery • Do not transport or store with metal objects

charger. Charging times will increase at am-

bient temperatures below +10 °C (+50 °F) or • Do not expose to ﬂame or heat.

above +35 °C (+95 °F). Do not attempt to • Do not disassemble or modify.

charge the battery at temperatures above • Use with designated chargers only.

40 °C (+104 °F); at temperatures below 0 °C • Do not drop or subject to strong physical

Note: Check the type of battery used in

your camera and read the appropriate

sections.

such as necklaces or hairpins.

The following describes the proper use of

batteries and how to prolong their life. Incor-

rect use can shorten battery life or cause leak-

age, overheating, ﬁre, or explosion.

(+32 °F), the battery will not charge.

shocks.

• Do not expose to water.

• Keep the terminals clean.

• The battery and camera body may become

warm to the touch after extended use. This

is normal.

Do not attempt to recharge a fully charged

battery. The battery does not however need

to be fully discharged before charging.

Li-ion Batteries

Read this section if your camera uses a

rechargeable Li-ion battery.

The battery may be warm to the touch imme-

diately after charging or use. This is normal.

The battery is not charged at shipment.

Charge the battery before use. Keep the bat-

tery in its case when not in use.

AA Alkalline/Rechargeable NiMH Batteries

Read this section if your camera uses AA

alkaline or rechargeable AA NiMH bat-

teries. Information on compatible battery

types may be found elsewhere in the camera

manual.

■ Battery Life

At normal temperatures, the battery can be

recharged about 300 times. A noticeable de-

crease in the length of time the battery will

hold a charge indicates that it has reached

the end of its service life and should be re-

placed.

■ Notes on the Battery

The battery gradually loses its charge when

not in use. Charge the battery one or two

days before use.

■ Cautions: Handling the Batteries

• Do not expose to water, ﬂame, or heat, or

store in warm or humid conditions.

• Do not transport or store with metal objects

such as necklaces or hairpins.

• Do not disassemble or modify the batteries

or battery casing.

• Do not subject to strong physical shocks.

• Do not use batteries that are leaking, de-

formed, or discolored.

Battery life can be extended by turning the

camera oﬀ when not in use.

■ Storage

Performance may be impaired if the battery is

left unused for extended periods when fully

charged. Run the battery ﬂat before storing it.

Battery capacity decreases at low tempera-

tures; a depleted battery may not function at

when cold. Keep a fully charged spare bat-

tery in a warm place and exchange as nec-

essary, or keep the battery in your pocket or

other warm place and insert it in the camera

only when shooting. Do not place the bat-

tery in direct contact with hand warmers or

other heating devices.

If the camera will not be used for an extended

period, remove the battery and store it in a

dry place with an ambient temperature of

from +15 °C to +25 °C (+59 °F to +77 °F). Do

not store in locations exposed to extremes of

temperature.

• Keep out of reach of infants and small chil-

dren.

• Insert in the correct orientation.

For Your Safety

• Do not mix old and new batteries, batteries ■ NiMH Batteries

with diﬀerent charge levels, or batteries of The capacity of Ni-MH batteries may be

AC Power Addaapptteerrss ((AAvvaaiillaabbllee SSeparately)

This section applies to all camera models.

Use only FUJIFILM AC power adapters desig-

nated for use with this camera. Other adapt-

ers could damage the camera.

diﬀerent types.

temporarily reduced when new, after long

• If the camera will not be used for an extend- periods of disuse, or if they are repeatedly

ed period, remove the batteries. Note that recharged before being fully discharged. This

the camera clock will be reset.

is normal and does not indicate a malfunc-

• The AC power adapter is for indoor use only.

• Be sure the DC plug is securely connected

to the camera.

• Turn the camera oﬀ before disconnecting

the adapter. Disconnect the adapter by the

plug, not the cable.

• The batteries may be warm to the touch tion. Capacity can be increased by repeatedly

immediately after use. Turn the camera discharging the batteries using the discharge

oﬀ and allow the batteries to cool before option in the camera setup menu and re-

handling.

charging them using a battery charger.

• Battery capacity tends to decrease at low

temperatures. Keep spare batteries in

CAUTION: Do not use the discharge option

• Do not use with other devices.

• Do not disassemble.

with alkaline batteries.

pocket or other warm place and exchange

as necessary. Cold batteries may recover

some of their charge when warmed.

• Fingerprints and other stains on the battery

terminals can impair battery performance.

Thoroughly clean the terminals with

soft, dry cloth before inserting them in the

camera.

The camera draws a small amount of current

even when oﬀ. Ni-MH batteries that have

been left in the camera for an extended pe-

riod may be drawn down to the point that

they no longer hold a charge. Battery perfor-

mance may also drop if the batteries are run

down in a device such as a ﬂashlight. Use the

discharge option in the camera setup menu

to discharge Ni-MH batteries. Batteries that

no longer hold a charge even after repeat-

edly being discharged and recharged have

reached the end of their service life and must

be replaced.

• Do not expose to high heat and humidity.

• Do not subject to strong physical shocks.

• The adapter may hum or become hot to the

touch during use. This is normal.

• If the adapter causes radio interference,

reorient or relocate the receiving antenna.

If the batteries leak, clean the battery

compartment thoroughly before in-

serting new batteries.

If ﬂuid from the battery comes into

contact with skin or clothing, ﬂush

the aﬀected area with water. If ﬂuid

enters your eyes, immediately ﬂush the

aﬀected area with water and seek

medical attention. Do not rub your eyes.

Failure to observe this precaution could

result in permanent visual impairment.

Ni-MH batteries can be recharged in a bat-

tery charger (sold separately). Batteries may

become warm to the touch after charging.

Refer to the instructions provided with the

charger for more information. Use the char-

ger with compatible batteries only.

Ni-MH batteries gradually lose their charge

when not in use.

■ Disposal

Dispose of used batteries in accord with local

regulations.

vii

For Your Safety

Liquid CCrystal

Electrical Innterference

Using the Camera

In the event that the LCD monitor is dam-

aged, care should be taken to avoid contact

with liquid crystal. Take the urgent action

indicated should any of the following situa-

tions arise:

This camera may interfere with hospital or

aviation equipment. Consult with hospital

or airline staﬀ before using the camera in a

hospital or on an aircraft.

Do not aim the camera at extremely bright

light sources, such as the sun in a cloudless

sky. Failure to observe this precaution could

damage the camera image sensor.

Color Television Systems

Take Test Shots

•

If liquid crystal comes in contact with your skin,

clean the area with a cloth and then wash

thoroughly with soap and running water.

If liquid crystal enters your eyes, ﬂush the af-

fected eye with clean water for at least 15

minutes and then seek medical assistance.

If liquid crystal is swallowed, rinse your

mouth thoroughly with water. Drink large

quantities of water and induce vomiting,

then seek medical assistance.

NTSC (National Television System Committee)

is a color television telecasting speciﬁcation

adopted mainly in the U.S.A., Canada, and

Japan. PAL (Phases Alternation by Line) is

a color television system adopted mainly in

European countries and China.

Before taking photographs on important

occasions (such as at weddings or before

taking the camera on a trip), take a test shot

and view the result in the LCD monitor to en-

sure that the camera is functioning normally.

FUJIFILM Corporation can not accept liability

for damages or lost proﬁts incurred as a result

of product malfunction.

Exif Print (Exif Version 2.3)

Exif Print is a newly revised digital camera ﬁle

format in which information stored with pho-

tographs is used for optimal color reproduc-

tion during printing.

Notes on Copyright

Unless intended solely for personal use, imag-

es recorded using your digital camera system

cannot be used in ways that infringe copy-

right laws without the consent of the owner.

Note that some restrictions apply to the

photographing of stage performances, enter-

tainments, and exhibits, even when intended

purely for personal use. Users are also asked

to note that the transfer of memory cards

containing images or data protected under

restrictions imposed by those copyright laws.

Although the display is manufactured using

extremely high-precision technology, it may

contain pixels that are always lit or that do not

light. This is not a malfunction, and images re-

corded with the product are unaﬀected.

IMPORTANT NOTICE:

Read Before Using the Software

Direct or indirect export, in whole or in part,

of licensed software without the permission

of the applicable governing bodies is pro-

hibited.

Trademarkk Information

xD-Picture Card and E are trademarks

of FUJIFILM Corporation. The typefaces in-

cluded herein are solely developed by Dyna-

Comware Taiwan Inc. Macintosh, QuickTime,

and Mac OS are trademarks of Apple Inc. in

the U.S.A. and other countries. Windows 7,

Windows Vista, and the Windows logo are

trademarks of the Microsoft group of com-

panies. Adobe and Adobe Reader are either

trademarks or registered trademarks of Ado-

be Systems Incorporated in the U.S.A. and/

or other countries. The SDHC and SDXC logos

are trademarks of SD-3C, LLC. The HDMI logo

is a trademark. YouTube is a trademark of

Google Inc. All other trade names mentioned

in this manual are the trademarks or regis-

tered trademarks of their respective owners.

Haandling

To ensure that images are recorded correctly,

do not subject the camera to impact or physi-

cal shocks while images are being recorded.

viii

About This Manual

Before using the camera, read this manual and the warnings in“For Your Safe-

ty”(Pii). For information on speciﬁc topics, consult the sources below.

Table of Contents ...........................Pxiii Troubleshooting ............................ P88

The “Table of Contents” gives an Having a speciﬁc problem with the

overview of the entire manual. The camera? Find the answer here.

principal camera operations are list-

ed here.

Warning MMessaggeess aanndd Displays ..... P94

Find out what’s behind that ﬂashing

icon or error message in the display.

Memoryy Caarrds

Pictures can be stored in the camera’s internal memory or on optional SD, SDHC, and

SDXC memory cards (P14), referred to in this manual as“memory cards.”

Frequeently--Usseedd BBuuttttons

■ Deletingg Pictures

■ Takiinngg PPictureess DDuurriinngg Playback

y Press the selector up (b) to display

deletion options.

y To return instantly to shooting mode,

press the shutter button halfway.

Shoot

View

■ Turning the Cammera on in

Playback Mode

y When the camera is

oﬀ, playback can be

started by pressing the

abutton for about a

second.

■ Silent Mode

y Press and hold the DISP/

BACK button to disable

camera lights and

sounds.

Prodduct Feeatures and Precaauutionns for Use

■ Water, DDust, annd Shockk Resistance

Q Thhee ccaammeerraa ccoommpplliieess wwiitthh JJIISS Class 8 water resistance and JIS Class 6 (IP68) dust resistance

standards, and hhas paasssed FUUJIFIILM drroop testts (ddrroopp hheeiigghhtt:: 11..55 mm//44..99 fftt..;; iimmppaacctt ssuurrffaaccee:: ppllyy--

wood, thicknness 55 cm/2..0 in..) comppliant withh MIL--STD 88110F Metthod 5516.5:: Shocck. These results

were obtained through inn-houssee testiinng and are not a blanket guarantee of water resistance

or invulnerability to damage or destruction. Thhee aacccceessssoorriieess ssuupppplliieedd wwiitthh tthhee ccaammeerraa aarree nnoott

water resistant.

■ Before Use

Q Thhee ffrroonnt surface of the camera lens iis proteccted by a sheet of glass. Foreign mattter on the

glass will appear in photographs; keep the glass clean at all times.

Q Be sure thhat thhe batttery-chhaammbbeerr aanndd coonnnneeccttoorr ccoovers are fully latched. Thhee pprreesseennccee ooff wwaa--

ter, mud, or sand in the camera could cause malfunction.

Q Do not opeen or cclose tthe batterry-chambeerr oorr ccoonnnneeccttoorr ccoover witth wet hands or near water,

for exammple whille on or bby a body of water.

Q Be ssuurree tthhee ccaammeerraa iiss ccoommpplleetteellyy ddrryy bbeeffoorree iinnsseerrttiinngg oorr rreemmooviing battteriees or meemory cards

or connecting the USB or A/V cable.

Q Thhee ccaammeerraa ddooeess nnoott ﬂﬂooaatt.. BBe sure ttoo aattttaacchh tthhee ssttrraapp aanndd kkeeeepp iitt aarroouunndd yyoouurr wwrriisstt wwhheenn

using the camera.

■ During Use

Q Reessttrriicctt uunnddeerrwwaatteerr uuse to ddepths of 55m (16 ft.)) or less annd periods shorter than 120 minutes.

Q Do not oopen orr cclose thhe batteery-chaambeerr ccoover while under water.

Q Do not use in hot springs or heated pools.

Q Do not dive into water with the camera or otherwise subject it to excessive force.

Q If thee cameerra is left onn the ssand,, iittss tteemmppeerraattuurree maay eexxcceeeedd opperattiing lliimmiittss aanndd sannd may

get into the speaker or microphone.

Q Sunscreen, suntan lotion, or other oily substances may discolor the camera body and should

be removveedd wwith a damp cloth.

Q Thhee ccaammeerraa mmaayy lloossee wwaatteerr rreessiissttaannccee iiff ssuubbjjeecctteedd ttoo eexxcceessssiivvee ffoorrccee oorr vviibbrraattiioonn.. CCoonnssuulltt yyoouurr

retailer or a FUJIFILM-authorized repair technician.

Product Features and Precautions for Use

■ Affter Use

Q Reemmoove any foreign matter from the water-resistant seal and adjacent surfaces. Foreign mat-

ter could ddamagge the sseal,, lowering water resistance.

Q Afftteerr uusing the camera underwater or in loccations whhere ffoorreeiiggnn mmaatttteerr mmiigghhtt aaddhheerree ttoo tthhee

camera body, rinse the camera under the tap or leave it in a basin of fresh water forr two to

three minutes.

Q Liquid soaps, detergents, alcohol, and other cleansers may aﬀect water resistance and should

nevver bee used.

Q Afftteerr use, removvee wwaatteerr ddrroopplets and foreign matter wwith aa ddrryy ccllootthh,, ﬁﬁrrmmllyy llaattcchh tthhee bbaatttteerryy--

chamber ccovveerr,, and soak the camera in frresh waterr for aboutt tteenn mmiinnuutteess.. DDrryy tthhee ccaammeerraa

thoroughhly afterr removing it from the water.

■ Storage and Maiintenancce

Q Do not sstore att temperratures bbelow 0 °C (32 °F) or abovvee 4400 °°CC ((110044 °°FF))..

Q To ensure continued water resistance, it is rreeccoommmmeennddeedd tthhaatt yyoouu hhaavvee tthhee wwaatteerr--rreessiissttaanntt

seal replaced about once a year (a fee iiss cchhaarrggeedd ffoorr tthhiiss sseerrvviiccee)).. CCoonnttaacctt yyoouurr rreettaaiilleerr oorr aa

FUJIFILM-authorized repair technician for more information.

■ Coolldd Climates

Q Battery pperformaance dropps at loww tteemmppeerraattuurrees, rreeducing the number of pictures that can be

taken. Insulate the camera to keep it warm or place it in your clothing.

Q Use an NP-45A battery.

Q Displayy responnse may sslow at low temperatures. Thhiiss iiss nnoott aa mmaallffuunnccttiion.

xii

Table of Contents

For Your Safety ..................................................................ii

IMPORTANT SAFETY INSTRUCTIONS..................................ii

Safety Notes....................................................................iv

About This Manual ...........................................................ix

Frequently-Used Buttons .................................................x

Product Features and Precautions for Use......................xi

Basic Photography and Playback

Taking Pictures in Q (Scene Recognition) Mode......19

Viewing Pictures .............................................................23

Moree oonn PPhotography

Shooting Mode................................................................24

Choosing a Shooting Mode ............................................24

Shooting Mode Options .................................................25

r MOTION PANORAMA..............................................27

bIntelligent Face Detection.......................................29

Focus Lock........................................................................30

dExposure Compensation..........................................32

FMacro Mode (Close-ups) ...........................................33

NUsing the Flash (Intelligent Flash) ............................34

hUsing the Self-Timer .................................................36

Beforre You Begin

Symbols and Conventions.................................................1

Supplied Accessories.........................................................1

Parts of the Camera ..........................................................2

Camera Displays...............................................................4

Shooting ........................................................................4

Playback.........................................................................5

First Steps

Charging the Battery ........................................................7

Inserting the Battery and a Memory Card.......................9

Compatible Memory Cards .............................................14

Turning the Camera on and Oﬀ ......................................16

Shooting Mode ..............................................................16

Playback Mode...............................................................16

Basic Setup ......................................................................18

xiii

Table of Contents

Moree oon Playback

Coonnnneections

Playback Options.............................................................37

IFavorites: Rating Pictures .........................................37

Playback Zoom...............................................................38

Multi-Frame Playback....................................................39

ADeleting Pictures......................................................40

bImage Search............................................................41

kPhotoBook Assist......................................................42

Creating a PhotoBook.....................................................42

Viewing Photobooks ......................................................43

Editing and Deleting Photobooks...................................43

Viewing Panoramas ........................................................44

Viewing Pictures on TV ...................................................48

Printing Pictures via USB................................................49

Printing the DPOF Print Order.........................................51

Viewing Pictures on a Computer....................................53

Windows: Installing MyFinePix Studio ...........................53

Macintosh: Installing FinePixViewer...............................55

Connecting the Camera..................................................57

Menus

Using the Menus: Shooting Mode..................................60

Using the Shooting Menu...............................................60

Shooting Menu Options .................................................60

ASHOOTING MODE....................................................60

NISO........................................................................61

OIMAGE SIZE............................................................62

TIMAGE QUALITY .....................................................63

PFINEPIX COLOR .......................................................63

DWHITE BALANCE ....................................................64

RCONTINUOUS .........................................................65

bFACE DETECTION.....................................................65

FAF MODE...............................................................66

VMOVIE QUALITY .....................................................66

qLED ILLUMINATOR...................................................66

Movies

Recording Movies............................................................45

Viewing Movies ...............................................................47

xiv

Table of Contents

Using the Menus: Playback Mode ..................................67

Using the Playback Menu...............................................67

Playback Menu Options..................................................67

kPHOTOBOOK ASSIST................................................67

bIMAGE SEARCH ......................................................67

AERASE ...................................................................67

NEDIT ......................................................................68

jMARK FOR UPLOAD TO............................................69

ISLIDE SHOW ..........................................................70

BRED EYE REMOVAL .................................................71

DPROTECT................................................................71

GCROP.....................................................................72

ORESIZE...................................................................72

CIMAGE ROTATE .......................................................73

ECOPY.....................................................................73

STRANSITION ...........................................................74

LMOVIE TRIMMING...................................................74

MOVIE JOIN ..................................................................75

KPRINT ORDER (DPOF) ..............................................75

The Setup Menu ..............................................................76

Using the Setup Menu....................................................76

Setup Menu Options ......................................................77

FDATE/TIME.............................................................77

NTIME DIFFERENCE ...................................................77

La ......................................................77

oSILENT MODE.........................................................77

RRESET....................................................................78

KFORMAT ................................................................78

AIMAGE DISP. ...........................................................78

BFRAME NO. ............................................................79

GOPERATION VOL......................................................80

HSHUTTER VOLUME ..................................................80

eSOUND..................................................................80

IPLAYBACK VOLUME ................................................80

JLCD BRIGHTNESS ....................................................80

ELCD MODE .............................................................81

MAUTO POWER OFF...................................................81

LDUAL IS MODE .......................................................81

BRED EYE REMOVAL .................................................81

DDIGITAL ZOOM .......................................................82

nSAVE ORG IMAGE....................................................82

cGUIDANCE DISPLAY ................................................82

QVIDEO SYSTEM .......................................................83

Table of Contents

Techniccaall NNotes

Troubleshooting

Optional Accessories .......................................................84

Accessories from FUJIFILM..............................................85

Caring for the Camera.....................................................86

Storage and Use .............................................................86

Cleaning.........................................................................87

Traveling ........................................................................87

Problems and Solutions..................................................88

Warning Messages and Displays ....................................94

Appendix

Tips and Tricks..................................................................98

Internal Memory/Memory Card Capacity....................101

Speciﬁcations ................................................................102

xvi

Before You Begin

Symbols andd Convventions

The following symbols are used in this manual:

Q : This information should be read before use to ensure correct operation.

R : Additional information that may be helpful when using the camera.

P: Other pages in this manual on which related information may be found.

Menus and other text in the LCD monitor are shown in bold. In the illustra-

tions in this manual, displays may be simpliﬁed for explanatory purposes.

Supplied Accessories

The following items are included with the camera:

NP-45A rechargeable

battery

BC-45B battery charger

USB cable

CD-ROM (contains

this manual)

Attttaacchhiing the Strap

Attach the strap as shown.

• Strap

• User Guide

Parts of the Camera

For more information, refer to the page listed to the right of each item.

Selector button

Move cursor up

d(exposure compensation) button (P32)

b(delete) button (Px)

MENU/OK button

Move cursor left

F(macro) button (P33)

Move cursor right

N(ﬂash) button (P34)

Move cursor down

h(self-timer) button (P36)

Before You Begin

Parts of the Camera

1 Zoom control ...........................................................20, 38 12 Strap eyelet .................................................................... 1

2 Shutter button.............................................................. 21 13 Battery-chamber cover latch .....................................9, 12

3 ON/OFF button ............................................................. 16 14 Connector cover latch ........................................48, 49, 57

4 Flash............................................................................. 34 15 DISP (display)/BACK button .....................................6, 18

5 Self-timer lamp ............................................................ 36

LED illuminator............................................................. 66 16 a(playback) button................................................... 23

6 Lens/protective glass 17 Tripod mount

o (silent mode) button^*................................................x

7 Speaker......................................................................... 47 18 USB multi-connector ...............................................49, 57

8 Microphone .................................................................. 45 19 Memory card slot.......................................................... 11

9 LCD monitor.................................................................... 4 20 Battery latch............................................................10, 13

10 t(movie recording) button........................................ 45 21 Battery chamber............................................................. 9

11 Indicator lamp (see below)

*Press and hold the DISP/BACK button until o is displayed.

Thhee IInndicator Lamp

The indicator lamp shows camera status as follows:

Indicator lamp

Glowwss ggrreen

Blinks green

Caammera sstatus

Focus locked.

Blur, focus, or exposure warning. Picture can be taken.

Blinks green and orange Recording pictures. Additional pictures can be taken.

Glowwss oorraannggee

Blinks orange

Blinks red

Recording pictures. No additional pictures can be taken at this time.

Flash charging; ﬂash will not ﬁre when picture is taken.

Lens or memory error.

Before You Begin

Parts of the Camera

Camera Displays

The following types of indicator may be displayed during shooting and play-

back. Indicators vary with camera settings.

■ Shooting

7 Movie quality................................................................ 45

8 Number of available frames........................................ 101

800

9 Sensitivity..................................................................... 61

10 Image size and quality.............................................62, 63

11 FINEPIX color ................................................................ 63

12 White balance............................................................... 64

13 Battery level ................................................................... 5

14 Dual IS mode ................................................................ 81

15 Exposure compensation................................................ 32

16 Date and time............................................................... 18

12/31/2050 10:00 AM

250

F4.5

1²

1 Shooting mode............................................................. 24 17 Blur warning............................................................35, 94

2 Intelligent Face Detection indicator .............................. 29 18 Focus warning .........................................................21, 94

3 Continuous shooting mode........................................... 65 19 Self-timer indicator ...................................................... 36

4 Silent mode indicator ................................................3, 77 20 Macro (close-up) mode................................................. 33

5 Focus frame .................................................................. 30 21 Flash mode ................................................................... 34

6 Internal memory indicator^*

*a: indicates that no memory card is inserted and that pictures will be stored in the camera’s internal memory (P11).

Before You Begin

Parts of the Camera

■ Playback

1 Playback mode indicator..........................................23, 37

2 Intelligent Face Detection indicator .........................29, 71

3 Red-eye removal indicator............................................ 71

4 Portrait enhancer.......................................................... 25

5 Silent mode indicator ................................................3, 77

6 Gift image..................................................................... 37

7 Frame number.............................................................. 79

8 Mark for upload to........................................................ 69

9 Photobook assist........................................................... 42

10 Favorites ....................................................................... 37

11 DPOF print indicator ..................................................... 51

12 Protected image ........................................................... 71

100-0001

400

4:3

YouTube

12/31/2050 10:00 AM

1²

1/250

F4.5

Batterryy LLevel

Battery level is shown as follows:

Indicator

Description

D(white)

C(white)

B(red)

Battery partially discharged.

Battery more than half discharged.

Low battery. Charge as soon as possible.

A(blinks red) Battery exhausted. Turn camera oﬀ and charge battery.

Before You Begin

Parts of the Camera

Hiding and Viewing Indicators

Press DISP/BACK to cycle through shooting and playback indicators as follows:

• Shooting: Indicators displayed/indicators hidden/best framing

• Playback: Indicators displayed/indicators hidden/Ifavorites

Before You Begin

First Steps

Chhaarrggiinngg the Batteerryy

The battery is not charged at shipment. Charge the battery before use.

Place the battery in the supplied battery charger.

Insert the battery in the orientation

Battery

indicated by the CBD labels.

Arrow

The camera uses an NP-45A recharge-

able battery.

CBD

label

CBD label

Battery charger

Plug the charger in.

Plug the charger into a power outlet. The charging indicator will light.

Thhee CCharggiinngg IInnddicator

The charging indicator shows battery charge status as follows:

Charging indicator

Battery status

Battery not inserted.

Battery fully charged.

Battery charging.

Battery fault.

Action

Insert the battery.

Reemmoove the battery.

—

Unplug thhe chargeer and remmove the battery.

Oﬀ

On (green)

On (yeelloow)

Blinks ((yelloow)

Charging the Battery

Charge the battery.

Remove the battery when charging is complete. See the speciﬁcations

(P106) for charging times (note that charging times increase at low tem-

peratures).

Q Unplug the charger when it is not in use.

First Steps

Innsseertinng the Baatttterryy aanndd aa MMemory Cardd

Although the camera can store pictures in internal memory, optional SD,

SDHC, and SDXC memory cards (sold separately) can be used to store addi-

tional pictures. After charging the battery, insert the battery and memory

card as described below.

Open the battery-chamber cover.

Press the latch as shown.

R Be sure the camera is oﬀ before opening the

battery-chamber cover.

Q Do not open the battery-chamber cover

when the camera is on. Failure to observe this

precaution could result in damage to image ﬁles or memory cards.

Q Do not use excessive force when handling the battery-chamber cover.

Q Remove water droplets and other foreign matter with a dry cloth before open-

ing the battery-chamber cover.

First Steps

Inserting the Battery and a Memory Card

Insert the battery.

Insert the battery with the terminal ﬁrst and

in the orientation shown by the label inside

the battery chamber, keeping the battery

latch pressed to one side. Conﬁrm that the

battery is securely latched.

Q Insert the battery in the correct orientation.

Do ^NOTuse force or attempt to insert the bat-

tery upside down or backwards. The battery

will slide in easily in the correct orientation.

Battery latch

Label

First Steps

Inserting the Battery and a Memory Card

Insert the memory card.

Holding the memory card in the orientation

shown at right, slide it in until it clicks into

place at the back of the slot.

Q Be sure card is in the correct orientation; do

not insert at an angle or use force. If the mem-

ory card is not correctly inserted or no mem-

ory card is inserted, awill appear in the LCD

monitor and internal memory will be used for

recording and playback.

Click

Q SD/SDHC/SDXC memory cards can be locked,

making it impossible to format the card or to

record or delete images. Before inserting an

SD/SDHC/SDXC memory card, slide the write-

protect switch to the unlocked position.

Write-protect switch

First Steps

Inserting the Battery and a Memory Card

Close the battery-chamber cover.

Before closing the cover, check to conﬁrm

that there is no dust, sand, or other foreign

matter on the water-resistant seal or adja-

cent surfaces.

Coonnﬁﬁrrming Thhat tthe Coovveerr IIss LLaattcchhed

• Conﬁrm that the battery-chamber or connector cover does not protrude from the

camera body.

• The covers are latched when the latches are in the positions shown below at left.

Latch indicator

Unlatched

Latched

Conﬁrm that there

are no gaps.

First Steps

Inserting the Battery and a Memory Card

Reemoving the Battery annd Memorry Caarrdd

Before removing the battery or memory card, turn the camera oﬀ and press the latch

to open the battery-chamber cover.

Battery latch

To remove the battery, press the battery latch to the side, and

slide the battery out of the camera as shown.

To remove the memory card, press it in and release it slowly.

The card can then be removed by hand. When a memory card

is removed, the card could come out of the slot too quickly.

Use your ﬁnger to hold it and gently release the card.

First Steps

Inserting the Battery and a Memory Card

■ Compatible Memory Cards

FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been ap-

proved for use in the camera. A complete list of approved memory cards

is available at http://www.fujifilm.com/support/digital_cameras/compatibility/.

Operation is not guaranteed with other cards. The camera can not be used

with xD-Picture Cards or MultiMediaCard (MMC) devices.

Q Memory Caarrds

• Do not turn the camera oﬀ or remove the memory card while the memory card is being formatted

or data are being recorded to or deleted from the card. Failure to observe this precaution

could damage the card.

• Format SD/SDHC/SDXC memory cards before ﬁrst use, and be sure to reformat all

memory cards after using them in a computer or other device. For more information

on formatting memory cards, see“KFORMAT” (P78).

• Memory cards are small and can be swallowed; keep out of reach of children. If a

child swallows a memory card, seek medical assistance immediately.

• miniSD or microSD adapters that are larger or smaller than the standard dimensions

of an SD/SDHC/SDXC card may not eject normally; if the card does not eject, take

the camera to an authorized service representative. Do not forcibly remove the card.

• Do not aﬃx labels to memory cards. Peeling labels can cause camera malfunction.

• Movie recording may be interrupted with some types of SD/SDHC/SDXC memory

card. Use a G card or better when shooting HD movies.

First Steps

Inserting the Battery and a Memory Card

• The data in internal memory may be erased or corrupted when the camera is re-

paired. Please note that the repairer will be able to view pictures in internal memory.

• Formatting a memory card or internal memory in the camera creates a folder in

which pictures are stored. Do not rename or delete this folder or use a computer or

other device to edit, delete, or rename image ﬁles. Always use the camera to delete

pictures from memory cards and internal memory; before editing or renaming ﬁles,

copy them to a computer and edit or rename the copies, not the originals.

Q Batteries

• Remove dirt from the battery terminals with a clean, dry cloth. Failure to observe this

precaution could prevent the battery from charging.

• Do not aﬃx stickers or other objects to the battery. Failure to observe this precaution

could make it impossible to remove the battery from the camera.

• Do not short the battery terminals. The battery could overheat.

• Read the cautions in“The Battery and Power Supply”(Pvi).

• Use only battery chargers designated for use with the battery. Failure to observe this

precaution could result in product malfunction.

• Do not remove the labels from the battery or attempt to split or peel the outer casing.

• The battery gradually loses its charge when not in use. Charge the battery one or

two days before use.

First Steps

Turning the Camera on and Oﬀ

Shooting Mode

Playback Mode

Press the ON/OFF button to turn the To turn the camera on and begin

camera on.

playback, press the a button for

about a second.

Press ON/OFF again to turn the camera

oﬀ.

Press the a button again or press

the ON/OFF button to turn the camera

oﬀ.

R Switching to Playback Mode

Press the a button to start playback.

Press the shutter button halfway to return

to shooting mode.

R Switching to Shooting Mode

To exit to shooting mode, press the shut-

ter button halfway. Press the abutton

to return to playback.

First Steps

Turning the Camera on and Oﬀ

Q Fingerprints and other marks on the protective glass covering the lens can aﬀect

pictures. Keep the glass clean.

Q The ON/OFF button does not completely end the supply of power to the camera.

R Auto Power Oﬀ

The camera will turn oﬀ automatically if no operations are performed for the length of

time selected for MAUTO POWER OFF (P81). To turn the camera on, use the ON/OFF

button or press the abutton for about a second.

First Steps

Baassic SSetup

A language-selection dialog is displayed the ﬁrst time the camera is turned

on. Set up the camera as described below (you can reset the clock or change

languages at any time using the FDATE/TIME or La options in

the setup menu; for information on displaying the setup menu, see page 77).

START MENU

Highlight a language and press MENU/OK.

ENGLISH

R Press DISP/BACK to skip the current step. Any steps you skip

FRANCAIS

DEUTSCH

ESPAÑOL

PORTUGUÊS

will be displayed the next time the camera is turned on.

SET

DATE/TIME NOT SET

The date and time will be displayed. Press the selector

left or right to highlight the year, month, day, hour, or

minute and press up or down to change. To change the

order in which the year, month, and day are displayed,

highlight the date format and press the selector up or

down. Press MENU/OK when settings are complete.

2013

2012

YY. MM. DD 2011

12:00

2010

2009

SET

R Thhee CCamera Clock

If the battery is removed for an extended period, the camera clock will be reset and the

language-selection dialog will be displayed when the camera is turned on.

First Steps

Basic Photography and Playback

Taking Pictures in Q (Scene RReeccoognitiioonn)) MMode

This section describes how to take pictures in Q (scene recoggnitiioon) mode.

The camera automatically analyzes the composition and adjusts settings ap-

propriately.

Turn the camera on.

Press the ON/OFF button to turn the camera on.

Q shooting indicators will be displayed.

The gIccoon

This icon indicates that the camera continuously searches for faces to select the

appropriate scene, increasing the drain on the battery.

Thhe Scene Iccoon

The camera selects the scene according to shooting conditions and the type of

subject: bPORTRAIT (portraits), c LANDSCAPE (landscapes), dNIGHT (poorly-lit land-

scapes), eMACRO (close ups), fNIGHT PORTRAIT (poorly-lit portraits), gBACKLIT PORTRAIT

(backlit portraits), aAUTO (all other scenes)

Taking Pictures in Q (Scene Recognition) Mode

Frame the picture.

Use the zoom control to frame the picture in the display.

Zoom out

Zoom in

Zoom indicator

Hoollddiinngg tthhee CCamera

Hold the camera steady with both hands and brace your

elbows against your sides. Shaking or unsteady hands can

blur your shots.

To prevent pictures that are out of focus or too dark (under-

exposed), keep your ﬁngers and other objects away from

the ﬂash and from the protective glass covering the lens.

Basic Photography and Playback

Taking Pictures in Q (Scene Recognition) Mode

Focus.

Press the shutter button halfway to focus.

Double

beep

R The lens may make a noise when the camera focuses; this

is normal.

If the camera is able to focus, it will beep twice and the in-

dicator lamp will glow green.

If the camera is unable to focus, the focus frame will turn red, swill be dis-

played, and the indicator lamp will blink green. Change the composition

or use focus lock (P30).

Basic Photography and Playback

Taking Pictures in Q (Scene Recognition) Mode

Shoot.

Smoothly press the shutter button the rest of the way

down to take the picture.

Click

R If the subject is poorly lit, the ﬂash may ﬁre when the pic-

ture is taken. For information on using the ﬂash when

lighting is poor, see “N Using the Flash (Intelligent Flash)”

(P34).

Thhee SShhuuttter Button

The shutter button has two positions. Pressing the shutter button halfway sets

focus and exposure; to shoot, press the shutter button the rest of the way down.

Basic Photography and Playback

Viewing Pictures

Pictures can be viewed in the LCD monitor. When taking important photo-

graphs, take a test shot and check the results.

Press the abutton.

The most recent picture will be displayed.

View additional pictures.

Press the selector right to view pictures in the

order recorded, left to view pictures in reverse

order.

Press the shutter button halfway to exit to shoot-

ing mode.

Basic Photography and Playback

More on Photography

Shhooottiinngg MMode

Choose a shooting mode according to the scene or type of subject.

Choosing a Shooting Mode

Press MENU/OK to display the shooting menu.

SHOOTING MENU

SHOOTING MODE

Highlight ASHOOTING MODE and press the

selector right to display shooting mode options.

SET

EXIT

SCENE RECOGNITION

Highlight the desired mode and press MENU/OK.

Selects optimum

camera settings

for certain modes.

SET

CANCEL

Press DISP/BACK to exit to shooting mode.

Shooting Mode

Shooting Mode Options

Mode

Description

The camera automatically analyzes the composition and selects a scene

according to shooting conditions and the type of subject.

QSCENE RECOGNITION

Choose for crisp, clear snapshots. This mode is recommended in most

situations.

B AUTO

PROGRAM AE

The camera sets exposure automatically.

The camera takes two shots: one without the ﬂash and one with.

Capture natural lighting under low-light conditions.

Choose for portraits.

CNATURAL & N

DNATURAL LIGHT

L PORTRAIT

Z PORTRAIT ENHANCER Choose for a smooth skin eﬀect when shooting portraits.

M LANDSCAPE

Choose for daylight shots of buildings and landscapes.

r MOTION PANORAMA Take up to three pictures and join them together to form a panorama.

N SPORT

Choose when photographing moving subjects.

O NIGHT

H NIGHT (TRIPOD)

Q SUNSET

Choose this mode for poorly lit twilight or night scenes.

Choose this mode for slow shutter speeds when shooting at night.

Choose this mode to record the vivid colors in sunrises and sunsets.

Choose for crisp, clear shots that capture the brightness of scenes domi-

nated by shining white snow.

R SNOW

S BEACH

Choose for crisp, clear shots that capture the brightness of sunlit beaches.

More on Photography

Shooting Mode

Mode

F UNDERWATER

Description

Choose for underwater photography.

t UNDER WWATER

Choose for wide-angle underwater shots that include more of the back-

ground behind the main subject.

(WIDE)

s UNDER WWATER

Choose for underwater close-ups of small objects.

(MACRO)

U PARTY

V FLOWER

W TEXT

Capture indoor background lighting under low-light conditions.

Choose for vivid close-ups of ﬂowers.

Take clear pictures of text or drawings in print.

More on Photography

Shooting Mode

■ r MOTION PANORAMA

In this mode, you can take up to three pictures and join them together to

form a panorama. Use of a tripod is recommended to assist in composing

overlapping shots.

Press the selector up to select a frame. Press the selector left or right to

highlight a pan direction and press MENU/OK.

Take a photograph. Exposure and white balance for the panorama are set

with the ﬁrst shot.

Frame the next shot to overlap with the previous picture by superimpos-

ing y on + so that they form a solid circle (z). The camera will release the

shutter automatically.

Pan direction

END

CANCEL

END

CANCEL

Display after 1st shot

Shutter released

More on Photography

Shooting Mode

Take the last shot as described in Step 3.

R To end shooting and create a panorama after the ﬁrst or second shot, press the

multi selector up after completing Step 2 or Step 3 and proceed to Step 5.

Press MENU/OK to save the picture.

Q Panoramas are created from multiple frames. The camera may in some cases be

unable to stitch the frames together perfectly.

Q The desired results may not be achieved with moving subjects, subjects close to

the camera, unvarying subjects such as the sky or a ﬁeld of grass, subjects that are

in constant motion, such as waves and waterfalls, or subjects that undergo marked

changes in brightness. Panoramas may be blurred if the subject is poorly lit.

For Besst Results

For best results, be careful not to tilt the camera backward or forward or to either

side and try not to move the camera while y and + are aligned to form a solid circle.

Printting PPanoramas

Depending on the page size and the size of the panorama, panoramas may print

with their edges cropped out or with wide margins at the top and bottom or at

both sides.

More on Photography

bInnttelligent Facce Deteeccttiioonn

Intelligent Face Detection sets focus and exposure for human faces anywhere

in the frame, preventing the camera from focusing on the background in

group portraits. Choose for shots that emphasize portrait subjects.

To use Intelligent Face Detection, press MENU/OK

to display the shooting menu and select ON for

bFACEDETECTION(P65). Facescanbedetected

with the camera in vertical or horizontal orientation;

if a face is detected, it will be indicated by a green

border. If there is more than one face in the frame,

the camera will select the face closest to the center;

other faces are indicated by white borders.

Q In some modes, the camera may set exposure for the frame as a whole rather than

the portrait subject.

Q If the subject moves as the shutter button is pressed, their face may not be in the

area indicated by the green border when the picture is taken.

More on Photography

Focus Lock

To compose photographs with oﬀ-center subjects:

Focus: Position the subject in the focus frame (U)

and press the shutter button halfway to lock focus

and exposure. Focus and exposure will remain locked

while the shutter button is pressed halfway (AF/AE

lock).

Recompose: Keep the button pressed halfway.

Shoot: Press the button all the way down.

More on Photography

Focus Lock

Autoffocus

Although the camera boasts a high-precision autofocus system, it may be unable to

focus on the subjects listed below. If the camera is unable to focus, focus on another

subject at the same distance and use focus lock to recompose the photograph.

• Very shiny subjects such as mirrors or car bodies.

• Subjects that show little contrast with the background

• Fast-moving subjects.

(for example, subjects in clothing that is the same color

• Subjects photographed through a window or other re- as the background).

ﬂective object.

• Subjects positioned in front of or behind a high-contrast

• Dark subjects and subjects that absorb rather than reﬂect object that is also in the focus frame (for example, a

light, such as hair or fur.

• Insubstantial subjects, such as smoke or ﬂame.

subject photographed against a backdrop of highly con-

trasting elements).

More on Photography

dExposure Coompeenssaation

To adjust exposure compensation when photo-

graphing very bright, very dark, or high-contrast

subjects, press the selector up (d). Press the selec-

tor up or down to choose an exposure compensa-

tion value and then press MENU/OK.

Choose positive (+) values

to increase exposure

Choose negative (–) values

to reduce exposure

R A dicon and exposure indicator are displayed at settings other than 0. Exposure

compensation is not reset when the camera is turned oﬀ; to restore normal expo-

sure control, choose a value of 0.

R Turn the ﬂash oﬀ when using exposure compensation.

R Exposure compensation is available only when P (PROGRAM AE) is selected for

shooting mode.

More on Photography

FMaacroo Mooddee ((CClloossee--uups)

For close-ups, press the selector left (F) and select

F. When macro mode is in eﬀect, the camera fo-

cuses on subjects near the center of the frame. Use

the zoom control to compose pictures (P20).

To exit macro mode, press the selector left (F) and

select H.

OFF

R Use of a tripod is recommended to prevent blur caused

by camera shake.

More on Photography

NUsing the Flash (Intellligenntt Flashh)

When the ﬂash is used, the camera’s Intelligent Flash system instantly analyzes

the scene based on such factors as the brightness of the subject, its position

in the frame, and its distance from the camera. Flash output and sensitivity

are adjusted to ensure that the main subject is correctly exposed while pre-

serving the eﬀects of ambient background lighting, even in dimly-lit indoor

scenes. Use the ﬂash when lighting is poor, for example when shooting at

night or indoors under low light.

Press the selector right (N) and choose from the fol-

lowing ﬂash modes:

AUTO FLASH

According to

shooting conditions

Option

Description

AUTO/K

(AUTO FLASH)

The ﬂash ﬁres when required. Recommended in most situations.

N/L

The ﬂash ﬁres whenever a picture is taken. Use for backlit subjects or for natural

(FORCED FLASH) coloration when shooting in bright light.

The ﬂash does not ﬁre even when the subject is poorly lit. Use of a tripod is

(SUPPRESSED FLASH) recommended.

O/M

Capture both the main subject and the background under low light (note that

(SLOW SYNCHRO) brightly lit scenes may be overexposed).

More on Photography

NUsing the Flash (Intelligent Flash)

R If the ﬂash will ﬁre, pwill be displayed when the shutter button is pressed halfway.

At slow shutter speeds, kwill appear in the display to warn that pictures may be

blurred; use of a tripod is recommended.

R The ﬂash may ﬁre several times with each shot. Do not move the camera until

shooting is complete.

R The ﬂash may cause vignetting.

Red-Eye Reemmovaall

When Intelligent Face Detection (P29) and red-eye removal (P71) are

on, red-eye removal is available in auto (K; RED EYE REDUCTION), ﬂash

on (L; FORCED FLASH), and slow sync (M; RED EYE & SLOW) modes.

Red-eye removal minimizes “red-eye”caused when light from the ﬂash is

reﬂected from the subject’s retinas as shown in the illustration at right.

More on Photography

hUsing thee Selff-Timer

To use the self-timer, press the selector down (h)

and choose from the following options:

OFF

Option

T(OFF)

Description

Self-timer oﬀ.

The camera starts the timer when it detects two portrait subjects close together.

Press the selector up to choose how close the subjects must be together before

the timer starts (the more hearts, the closer the subjects must be together).

R To stop the timer before the picture is taken, press DISP/BACK.

a(COUPLE TIMER)

The camera will start the timer when it detects the selected number of portrait

g( GROUP TIMER) subjects. Press the selector up to choose the number of subjects.

R To stop the timer before the picture is taken, press DISP/BACK.

The shutter is released ten seconds after the shutter button is pressed. Use for

S(10 SEC)

self-portraits. The self-timer lamp on the front of the camera blinks while the

timer counts down.

The shutter is released two seconds after the shutter button is pressed. Use to

reduce blur caused by the camera moving when the shutter-release button is

pressed. The self-timer lamp will blink as the timer counts down.

R(2 SEC)

More on Photography

More on Playback

Playback OOpptions

To view the most recent picture in the LCD monitor, press the abutton.

100-0001

Press the selector right to view pictures in the order recorded, left to view

pictures in reverse order. Keep the selector pressed to scroll rapidly to the

desired frame.

R Pictures taken using other cameras are indicated by a m(“gift image”) icon during

playback.

IFavorites: Rating Pictures

To rate the picture currently displayed in full-frame playback, press DISP/BACK

and press the selector up and down to select from zero to ﬁve stars.

Playback Options

Playback Zoom

Select T to zoom in on pictures displayed in single-frame playback; select W to

zoom out. When the picture is zoomed in, the selector can be used to view

areas of the image not currently visible in the display.

Zoom indicator

Navigation window shows

portion of image currently

displayed in LCD monitor

Press DISP/BACK to exit zoom.

R The maximum zoom ratio varies with image size. Playback zoom is not available

with cropped or resized copies saved at a size of a or smaller.

More on Playback

Playback Options

Multi-Frame Playback

Selecting W when a picture is shown full-frame in the LCD monitor displays

the current image with previous and following images in the background.

Select W to increase the number of images displayed to two, nine, or one

hundred, T to view fewer images.

100-0001

When two or more images are displayed, use the selector to highlight images

and press MENU/OK to view the highlighted image full frame. In the nine- and

hundred-frame displays, use the selector to view more pictures.

More on Playback

ADeleting Piictures

PLAYBACK MENU

To delete individual pictures, multiple selected

pictures, or all pictures, press MENU/OK, select

AERASE(P67),andchoosefromtheoptionsbe-

low. Note that deleted pictures can not be recov-

ERASE

BACK

FRAME

SELECTED FRAMES

ALL FRAMES

SET

ered. Copy important pictures to a computer or other storage device before

proceeding.

Option

Description

Press the selector left or right to scroll through pictures and press MENU/OK

to delete the current picture (a conﬁrmation dialog is not displayed).

FRAME

Highlight pictures and press MENU/OK to select or deselect (pictures that

are protected or in a print order are shown by u). When the operation is

complete, press DISP/BACK to display a conﬁrmation dialog, then highlight

OK and press MENU/OK to delete the selected pictures.

A conﬁrmation dialog will be displayed; highlight OK and press MENU/OK to

delete all unprotected pictures (if a memory card is inserted, only the pic-

tures on the memory card will be aﬀected; the pictures in internal memory

are only deleted if no memory card is inserted). Pressing DISP/BACK cancels

deletion; note that any pictures deleted before the button was pressed can

not be recovered.

SELECTED FRAMES

ALL FRAMES

R Protected pictures can not be deleted. Remove protection from any pictures you

wish to delete (P71).

R If a message appears stating that the selected images are part of a DPOF print order,

press MENU/OK to delete the pictures.

More on Playback

bImmaage SSearch

Search for pictures.

Select bIMAGE SEARCH in the playback menu (P67), highlight one of

the following search criteria, and press MENU/OK:

• BY DATE: Search by date.

• BY FACE: Search for faces from the face recognition database.

• BY IFAVORITES: Search by rating.

• BY SCENE: Search by scene.

• BY TYPE OF DATA: Find all still pictures, all movies, or edited pictures.

• BY UPLOAD MARK: Find all pictures selected for upload to a speciﬁed desti-

nation.

Select a search condition. Only pictures that match the search condition

will be displayed. To delete or protect selected pictures or to view the

search results in a slide show, press MENU/OK and choose AERASE (P40),

DPROTECT (P71), or ISLIDE SHOW (P70).

More on Playback

kPhotooBBoook Assist

Create books from your favorite photos.

Creating a PhotoBook

Select NEW BOOK for kPHOTOBOOK ASSIST in the playback menu

(P67) and choose from the following options:

• SELECT FROM ALL: Choose from all available pictures.

• SELECT BY IMAGE SEARCH: Choose from pictures matching selected search

conditions (P41).

R Neither photographs a or smaller nor movies can be selected for photobooks.

Scroll through the images and press the selector up to select or deselect.

To display the current image on the cover, press the selector down. Press

MENU/OK to exit when the book is complete.

R The ﬁrst picture selected becomes the cover image. Press the selector down to

select a diﬀerent image for the cover.

Select COMPLETE PHOTOBOOK (to select all photos or all photos match-

ing the speciﬁed search conditions for the book, choose SELECT ALL).

The new book will be added to the list in the photobook assist menu.

Q Books can contain up to 300 pictures.

Q Books that contain no photos are automatically deleted.

More on Playback

kPhotoBook Assist

Viewing Photobooks

Highlight a book in the photobook assist menu and press MENU/OK to display

the book, then press the selector left or right to scroll through the pictures.

Editing and Deleting Photobooks

Display the photobook and press MENU/OK. The following options will be dis-

played; select the desired option and follow the on-screen instructions.

• EDIT: Edit the book as described in“Creating a PhotoBook”(P42).

• ERASE: Delete the book.

Photoobooks

Photobooks can be copied to a computer using the supplied MyFinePix Studio soft-

ware.

More on Playback

Viewing Panoramas

If you press the selector down when a panorama is displayed full frame, the

camera will play back the picture from left to right. To pause playback, press

the selector down; press the selector down again to resume. To exit to full-

frame playback, press the selector up while panorama playback is in progress.

PLAY

STOP

PAUSE

More on Playback

Movies

Recordiinngg MMoviess

Press t to shoot a movie. During recording,

yREC and the time remaining will be displayed

in the LCD monitor and sound will be recorded via

the built-in microphone (be careful not to cover the

microphone during recording).

REC

Time available is displayed

in monitor

To end recording, press the tbutton again. Recording ends automatically

when the movie reaches maximum length or memory is full.

R Zoom can be adjusted while recording is in progress.

R Before recording, select a frame size using the VMOVIE QUALITY option in the

shooting menu. Select h1280 (1280×720) for an aspect ratio of 16:9 (High Deﬁni-

tion) or f (640×480) to record longer standard deﬁnition movies.

R Focus is ﬁxed when tis pressed. Exposure and white balance are adjusted auto-

matically throughout recording. The color and brightness of the image may vary

from that displayed before recording begins.

R Sounds made by the camera may be recorded.

Recording Movies

Q The indicator lamp lights while movies are being recorded. Do not open the bat-

tery chamber during shooting or while the indicator lamp is lit. Failure to observe

this precaution could prevent the movie from being played back.

Q Vertical or horizontal streaks may appear in movies containing very bright subjects.

This is normal and does not indicate a malfunction.

Q The temperature of the camera may rise if it is used to record movies for an ex-

tended period or if the ambient temperature is high. This is normal and does not

indicate a malfunction.

Movies

Viewing Movvies

100-006

During playback, movies are displayed in the LCD monitor

as shown at right. The following operations can be per-

formed while a movie is displayed:

PLAY

Option

Description

Start/pause Press the selector down to start playback. Press again to

playback pause.

End playback/ Press the selector up to end playback. If playback is not in

delete

progress, pressing the selector up will delete the movie.

Press the selector right to advance, left to rewind. If playback

is paused, the movie will advance or rewind one frame

each time the selector is pressed.

Advance/

rewind

Press MENU/OK to pause playback and display volume con-

trols. Press the selector up or down to adjust the volume

and press MENU/OK to exit. Volume can also be adjusted

from the setup menu.

Adjust voolume

Q Do not cover the speaker during playback.

Movies

Connections

Viewing Pictures on TV

Connect the camera to a TV to show pictures to a group.

Turn the camera oﬀ and connect an optional A/V cable as shown below.

Connect yellow plug to

video-in jack

Insert into

USB multi-connector

Connect white plug to

Connector cover

Battery-chamber cover

audio-in jack

Q When connecting cables, be sure the connectors are fully inserted.

Q Be sure the battery-chamber cover is open before attempting to open or close

the connector cover.

R Image quality may drop during movie playback.

R Optional accessories (P84, 85) are required to view HD movies on a high-deﬁni-

tion TV. The HDP-L1 HD player uses SDHC and SD memory cards.

Tune the television to the video input channel. See the documentation

supplied with the television for details.

Press the abutton for about a second to turn the camera on. The camera

monitor turns oﬀ and pictures and movies are played back on the TV. Note

that the camera volume controls have no eﬀect on sounds played on the

TV; use the television volume controls to adjust the volume.

Printing Pictures via USB

If the printer supports PictBridge, the camera can be connected

directly to the printer as shown below and pictures can be printed

without ﬁrst being copied to a computer. Note that depending on

the printer, not all the functions described below may be supported.

Connect the supplied USB cable as shown and turn the printer on.

Q Be sure the battery-chamber cover is open before attempting to open or close

the connector cover.

Connector cover

Battery-chamber cover

Press the abutton for about a second to turn the camera on.

Press the selector left or right to display a picture you wish to print.

Press the selector up or down to choose the number of copies (up to 99).

Repeat steps 3–4 to select additional pictures. Press MENU/OK to display a

conﬁrmation dialog when settings are complete.

Connections

Printing Pictures via USB

Press MENU/OK to start printing. Printing can be interrupted by pressing

DISP/BACK, but note that some printers may not respond immediately. If

the printer stops before printing is complete, turn the camera oﬀ and then

on again.

After conﬁrming that PRINTING has cleared from the camera display, turn

the camera oﬀ and disconnect the USB csable.

R Pictures can be printed from internal memory or a memory card that has been

formatted in the camera.

R If no pictures are selected, the camera will print one copy of the current picture.

R Page size, print quality, and border selections are made using the printer.

Printinng thee DDaattee ooff RReecoorrding

To print the date of recording on pictures, press DISP/BACK in the PictBridge display

and select PRINT WITH DATE s in the PictBridge menu (to print pictures without

the date of recording, select PRINT WITHOUT DATE).

Connections

Printing Pictures via USB

Printing the DPOF Print Order

The KPRINT ORDER (DPOF) option in the playback menu can be used to

create a digital “print order” for PictBridge-compatible printers (P84) or de-

vices that support DPOF.

DPOF

DPOF (Digital Print Order Format) is a standard that allows pictures to be

printed from“print orders”stored in internal memory or on a memory card.

The information in the order includes the pictures to be printed and the

number of copies of each picture.

Select playback mode and press MENU/OK to display the playback menu.

Highlight KPRINT ORDER (DPOF) and press MENU/OK.

Highlight one of the following options and press MENU/OK:

• WITH DATE s: Print the date of recording on pictures.

• WITHOUT DATE: Do not print the date of recording on pictures.

R Some printers do not support date printing. See the printer manual for details.

Press the selector left or right to display a picture you wish to add to or

remove from the print order.

Connections

Printing Pictures via USB

Press the selector up or down to choose the number of copies (up to 99).

To remove a picture from the print order, press the selector down until the

number of copies is zero.

Repeat Steps 4–5 to complete the print order and press MENU/OK when

settings are complete.

A conﬁrmation dialog will be displayed. Press MENU/OK to save the print

order.

R Remove the memory card to create or modify a print order for the pictures in

internal memory.

R Print orders can contain a maximum of 999 pictures.

R If a memory card is inserted containing a print order created by another camera,

a message will be displayed. Create a new print order as described above.

Connections

Viewingg Picturreess oonn aa CCoommppuutter

The supplied software can be used to copy pictures to a computer, where

they can be stored, viewed, organized, and printed. Before proceeding, install

the software as described below. Do NOT connect the camera to the computer

until installation is complete.

Windows: Installing MyFinePix Studio

Conﬁrm that the computer meets the following system requirements:

Windows 7^*

Windoows Vista^*

Windows XP^*

2GHz Pentium 4 or

better

CPU

3GHz Pentium 4 or better

RAM

Free disk space

1GB or more

15GB or more

512MB or more

2GB or more

• 1024×768 pixels or more with 24-bit color or better

• A graphics processing unit (GPU) that supports DirectX 7 or later

Video

• Built-in USB port recommended. Operation is not guaranteed with other

USB ports.

Other

• Internet connection (broadband recommended) required to install

.NET Framework (if necessary), to use auto update feature, and when per-

forming such tasks as sharing pictures on-line or via e-mail.

* Other versions of Windows are not supported. Only pre-installed operating systems are

supported; operation is not guaranteed on home-built computers or computers that have

been upgraded from earlier versions of Windows.

Start the computer. Log in to an account with administrator privileges

before proceeding.

Connections

Viewing Pictures on a Computer

Exit any applications that may be running and insert the installer CD in a

CD-ROM drive.

Windoows 7/Wiindows Vista

If an AutoPlay dialog is displayed, click SETUP.EXE. A “User Account Control”

dialog will then be displayed; click Yes (Windows 7) or Allow (Windows Vista).

The installer will start automatically; click Install MyFinePix Studio and

follow the on-screen instructions to install MyFinePix Studio.

If the Installer Does Noott SSttaarrtt AAuuttoommaattiiccaalllly

If the installer does not start automatically, select Computer or My Computer

from the Start menu, then double-click the FINEPIX CD icon to open the FINEPIX

CD window and double-click setup or SETUP.EXE.

If prompted to install Windows Media Player, DirectX, or .NET Framework,

follow the on-screen instructions to complete installation.

Remove the installer CD from the CD-ROM drive when installation is com-

plete. Store the installer CD in a dry location out of direct sunlight in case

you need to re-install the software.

Installation is now complete. Proceed to“Connecting the Camera”(P57).

Connections

Viewing Pictures on a Computer

Macintosh: Installing FinePixViewer

Conﬁrm that the computer meets the following system requirements:

CPU

PowerPC or Intel

Pre-installed copies of Mac OS X version 10.3.9–10.6 (visit http://www.fujifilm.

com/support/digital_cameras/compatibility/ for more information)

RAM

256MB or more

A minimum of 200MB required for installation with 400MB available when

FinePixViewer is running

800×600 pixels or more with thousands of colors or better

Free disk space

Video

Built-in USB port recommended. Operation is not guaranteed with other USB

ports.

Other

After starting the computer and quitting any applications that may be run-

ning, insert the installer CD in a CD-ROM drive and double-click Installer

for Mac OS X.

An installer dialog will be displayed; click Installing FinePixViewer to start

installation. Enter an administrator name and password when prompted

and click OK, then follow the on-screen instructions to install FinePixViewer.

Click Exit to quit the installer when installation is complete.

Connections

Viewing Pictures on a Computer

Remove the installer CD from the CD-ROM drive. Note that you may be

unable to remove the CD if Safari is running; if necessary, quit Safari before

removing the CD. Store the installer CD in a dry location out of direct sun-

light in case you need to re-install the software.

Mac OS X 10.5 or earlier: Open the “Applications” folder, start Image Capture,

and select Preferences… from the Image Capture application menu. The

Image Capture preferences dialog will be displayed; choose Other… in

the When a camera is connected, open menu, then select FPVBridge in

the “Applications/FinePixViewer” folder and click Open. Quit Image Cap-

ture.

Mac OS X 10.6: Connect the camera and turn it on. Open the “Applications”

folder and start Image Capture. The camera will be listed under DEVICES;

select the camera and choose FPVBridge from the Connecting this cam-

era opens menu and click Choose. Quit Image Capture.

Installation is now complete. Proceed to“Connecting the Camera”(P57).

Connections

Viewing Pictures on a Computer

Connecting the Camera

If the pictures you wish to copy are stored on a memory card, insert the

card into the camera.

R Windows users may require the Windows CD when starting the software for

the ﬁrst time.

Q Loss of power during transfer could result in loss of data or damage to internal

memory or the memory card. Charge the battery before connecting the camera.

Turn the camera oﬀ and connect the

supplied USB cable as shown, making

sure the connectors are fully inserted.

Connect the camera directly to the com-

puter; do not use a USB hub or keyboard.

Q Be sure the battery-chamber cover is open

before attempting to open or close the

connector cover.

Connector cover

Battery-chamber

cover

Press the abutton for about a second to turn the camera on. MyFinePix

Studio or FinePixViewer will start automatically; follow the on-screen in-

structions to copy pictures to the computer. To exit without copying pic-

tures, click Cancel.

R If the software does not start automatically, it may not be correctly installed.

Disconnect the camera and reinstall the software.

Connections

Viewing Pictures on a Computer

For more information on using the supplied software, start the application

and select the appropriate option from the Help menu.

Q If a memory card containing a large number of images is inserted, there may be a

delay before the software starts and you may be unable to import or save images.

Use a memory card reader to transfer pictures.

Q Make sure that the computer does not display a message stating that copying is in

progress and that the indicator lamp is out before turning the camera oﬀ or discon-

necting the USB cable (if the number of images copied is very large, the indicator

lamp may remain lit after the message has cleared from the computer display).

Failure to observe this precaution could result in loss of data or damage to internal

memory or the memory card.

Q Disconnect the camera before inserting or removing memory cards.

Q In some cases, it may not be possible to access pictures saved to a network server

using the supplied software in the same way as on a standalone computer.

Q The user bears all applicable fees charged by the phone company or Internet ser-

vice provider when using services that require an Internet connection.

Connections

Viewing Pictures on a Computer

Disconnecting thhee CCamera

After conﬁrming that the indicator lamp is out, follow the on-screen instructions to

turn the camera oﬀ and disconnect the USB cable.

Uninstalling the Supplied Softtwwaarree

Only uninstall the supplied software when it is no longer required or before begin-

ning reinstallation. After quitting the software and disconnecting the camera, drag

the “FinePixViewer” folder from “Applications” into the Trash and select Empty Trash

in the Finder menu (Macintosh), or open the control panel and use “Programs and

Features”(Windows 7/Windows Vista) or“Add or Remove Programs”(Windows XP) to

uninstall MyFinePix Studio. Under Windows, one or more conﬁrmation dialogs may

be displayed; read the contents carefully before clicking OK.

Connections

Menus

Using the MMenus: Shhoooottiinngg MMode

Using the Shooting Menu

To display the shooting menu, press MENU/OK in

shooting mode. Highlight items and press the se-

lector right to view options, then highlight an op-

tion and press MENU/OK. Press DISP/BACK to exit when

settings are complete. The options available vary with the shooting mode

selected.

Shooting Menu Options

ASHOOTING MODE

(defaults to Q)

Choose a shooting mode according to the type of subject (P24).

Using the Menus: Shooting Mode

NISO

(defaults to AUTO)

Control the camera’s sensitivity to light. Higher values can reduce blur; note, however, that mot-

tling may appear in pictures taken at high sensitivities.

100

Bright

ISO

Scene

3200

Dark

Less noticeable

Nooiissee ((mmottling)

More noticeable

Option

AUTO

Description

Sensitivity is adjusted automatically in response to shooting conditions.

3200 / 1600 / 800 / 400 /

200 / 100

Sensitivity is set to the speciﬁed value, which is shown in the display.

Menus

Using the Menus: Shooting Mode

OIMAGE SIZE

(defaults to O4:3)

Choose the image size and aspect ratio at which pictures are record-

ed. Large pictures can be printed at large sizes with no drop in quality,

while small pictures require less memory, allowing more pictures to be

recorded.

O4 : 3

Size Aspect ratio

Size Versus Aspect Ratio

Size

Option

Prints at sizes up to

34×25cm (13.5×10in.)

24×18cm (9.5×7in.)

17×13cm (7×5in.)

Aspect ratio

4 : 3: Pictures have the same proportions as

the camera display.

16 : 9: Suited for display on High Deﬁnition

(HD) devices.

Menus

Using the Menus: Shooting Mode

TIMAGE QUALITY

(defaults to N)

Choose how much image ﬁles are compressed.

Option

Description

FINE

Low compression. Select for higher image quality.

NORMAL

High compression. Select this option to store more pictures.

PFINEPIX COLOR

(defaults to c)

Enhance contrast and color saturation or take pictures in black and white.

Option

Description

c STANDARD

Standard contrast and saturation. Recommended in most situations.

Vivid contrast and color. Choose for vivid shots of ﬂowers or enhanced greens

and blues in landscapes.

a CHROME

b B&W

f SEPIA

Take pictures in black and white.

Take pictures in sepia.

R Seettttiinnggs otheer thann c STANDARD arree showwnn bbyy aann iiccoonn iinn tthe LCD monitor.

R Depending on the subject, the eﬀects of aCHROME may not be visible in the LCD mmoonniittoorr..

Menus

Using the Menus: Shooting Mode

DWHITE BAALLANCE

(defaults to AUTO)

For natural colors, choose a setting that matches the light source.

Option

AUTO

Description

White balance adjusted automatically.

For subjects in direct sunlight.

For subjects in the shade.

Use under“daylight”ﬂuorescent lights.

Use under“warm white”ﬂuorescent lights.

Use under“cool white”ﬂuorescent lights.

Use under incandescent lighting.

R Reessuullttss vvaarryy wwiitthh sshhooting coonditionnss. Play picctures back after shooting to check ccoolloorrss iinn

the LCD monitor.

Menus

Using the Menus: Shooting Mode

RCONTINUOUS

(defaults to OFF)

Capture motion in a series of pictures.

Option

Description

I ON

OFF

The camera takes up to 3 pictures while the shutter button is pressed.

One photograph is taken each time the shutter button is pressed.

R Focuss and expposuree aare deteerminedd by the ﬁrst frame in each series.

R Thhee ﬂash turns oﬀ automatiicallly. Thhee pprreeviouslly selecteed ﬂassh moddee is resstoreed when OFF is

selected for RCONTINUOUS.

R Frame rate varies with shutter speed.

R Thhee nnuummbbeerr of pictures that can be recorded depends on tthe memoory avaiilable.

bFACE DETECTION

Choose whether the camera automatically detects and sets focus and exposure for human por-

trait subjects (P29).

Menus

Using the Menus: Shooting Mode

FAF MODE

This option controls how the camera selects the focus area. Regardless of the option selected,

the camera will focus on the subject in the center of the LCD monitor when macro mode is on.

Option

Description

rCENTER

The camera focuses on the subject in the center of the frame.

Position the subject in the center focus area and press the selector left. Focus will

track the subject as it moves through the frame.

xTRACKING

R Note that in x mode, the camera focuses continuously, increasing the drain on the bbaatttteerryy,,

and that the sound of the camera focusing may be audible.

VMOVIE QUALITY

(defaults to f)

Choose a frame size for movies (P45).

qLED ILLUMINATOR

(defaults to OFF)

Choose whether the LED (P2) lights to illuminate nearby subjects when lighting is poor.

Option

OFF

Description

The LED lights during shooting.

LED oﬀ.

R Thhee LLEEDD wwiilll not light when ON is selected for oSILENT MODE in the setup menu (P77).

R Seelleecctting ON increases the drain on the battery. Seelect OFF when the LED is not in use.

Menus

Using the MMenus: Playbbaacckk MMode

Using the Playback Menu

To display the playback menu, press MENU/OK in play-

back mode. Highlight items and press the selector

right to view options, then highlight an option and

press MENU/OK. Press DISP/BACK to exit when settings

are complete.

Playback Menu Options

kPHOTOBOOK ASSIST

Create books from your favorite photos (P42).

bIMAGE SEARCH

Search for pictures (P41).

AERASE

Delete all or selected pictures (P40).

Menus

Using the Menus: Playback Mode

NEDIT

Create a retouched copy of the current picture.

Display the desired picture.

Select

EDIT in the playback menu and choose from the following options:

Option

CROP

Description

Crop the copy.

ASPECT RATIO Choose the aspect ratio.

BRIGHTNESS Adjust brightness.

CONTRAST

COLOR

SEPIA

Adjust contrast.

Choose positive values for“warmer”colors, negative values for“cooler”colors.

Convert the copy to sepia or black and white.

If the original was taken with Intelligent Face Detection, a mosaic eﬀect can

be applied to up to four faces. If Intelligent Face Detection was oﬀ or no

faces were detected, the mosaic eﬀect will be applied to the center of the

image.

FACE MOSAIC

Press MENU/OK to create a retouched copy (in some cases, additional options will be displayed;

adjust settings as desired and press MENU/OK to save the copy).

R Reettoouucchheedd ccooppiieess ccaann nnoot be furtther retoouched, ccroppedd, or rotated.

R Reettoouucchheedd ccooppiieess aarree 6640×4880 pixxeels in ssize.

Menus

Using the Menus: Playback Mode

jMARK FOR UPLOAD TO

Select pictures for upload to YouTube or Facebook using MyFinePix Studio (Windows only).

■ Selecting Pictures for Upload

Select YouTube to choose movies for upload to YouTube, FACEBOOK to choose photos and

movies for upload to Facebook.

Press the selector left or right to display pictures and press MENU/OK to select or deselect. Press

DISP/BACK to exit when all the desired pictures are selected.

R Only movviieess ccaann bbee sseelleected for upload to YouTube.

R During pllayback,, selecteed pictuurres arree iinnddiiccaatteedd bby jYouTube or jFACEBOOK icons.

■ RESET ALL: Deselecting All Pictures

Choose RESET ALL to deselect all pictures. If the number of pictures aﬀected is very large, a

message will be displayed while the operation is in progress. Press DISP/BACK to exit before the

operation is complete.

■ Uploading Pictures (Windows Only)

Selected pictures can be uploaded using the YouTube/Facebook Upload option in MyFinePix

Studio.

Select with camera

Upload from computer

For information on installing MyFinePix Studio and connecting the camera to a computer, see

“Viewing Pictures on a Computer”(P53).

Menus

Using the Menus: Playback Mode

ISLIDEE SHOW

View pictures in an automated slide show. Choose the type of show and press MENU/OK to start.

Press DISP/BACK at any time during the show to view on-screen help. The show can be ended at

any time by pressing MENU/OK.

Option

NORMAL

Description

Press selector left or right to go back or skip ahead one frame. Select FADE-IN

for fade transitions between frames.

FADE-IN

NORMAL g

FADE-IN g

MULTIPLE

As above, except that camera automatically zooms in on faces selected with

Intelligent Face detection.

Display several pictures at once.

SCRAP BOOK VIEW Display multiple pictures in random positions and sizes.

SELECT BGM Choose background music.

R Thhee ccaammeerraa will not turn oﬀ autoomaticaally whiile a sliide show is in progress.

Menus

Using the Menus: Playback Mode

BRED EYE RREMOVAL

If the current picture is marked with a gicon to indicate that it was taken with Intelligent Face

Detection, this option can be used to remove red-eye. The camera will analyze the image; if red-

eye is detected, the image will be processed to create a copy with reduced red-eye.

Display the desired picture.

Select BRED EYE REMOVAL in the playback menu.

Press MENU/OK.

R Reedd eeyyee mmaayy nnoott bbee rreemmooved if the camera is uunnaabbllee ttoo ddeetteecctt aa ffaaccee oorr tthhee ffaaccee iiss iinn pprrooﬁﬁllee..

Reessuullttss may diﬀer depending on the scene. Red eeyyee ccaann nnoott bbee rreemmooved from pictures that

have already been processed using red--eeye remmovvaall oorr ppiiccttuurreess ccrreeaatteedd wwiitthh ootthheerr ddeevviicceess..

R Thhee aammoouunntt ooff ttiimmee nneeeeddeedd ttoo pprroocceessss tthhee iimmaaggee vvaarriieess wwiitthh tthhee nnuummbbeerr ooff ffaacceess ddeetteecctteedd..

R Copies created with BREDD EYE REMMOVAL arre indiccatedd bby a eicon during playback.

DPROTECT

Protect pictures from accidental deletion.

Select DPROTECT in the playback menu.

Highlight one of the following options and press MENU/OK:

• FRAME: Protect selected pictures. Press the selector left or right to view pictures and press

MENU/OK to select or deselect. Press DISP/BACK when the operation is complete.

• SET ALL: Protect all pictures.

• RESET ALL: Remove protection from all pictures.

Q Protected piccturees willl be deeletedd when the meemoryy cardd oor inteernall memory iss formmatted

(P51).

Menus

Using the Menus: Playback Mode

GCROP

Create a cropped copy of the current picture.

Display the desired picture.

Select GCROP in the playback menu.

Use the zoom control to zoom in and out and use the selector to scroll the picture until the

desired portion is displayed.

Press MENU/OK to display a conﬁrmation dialog.

Press MENU/OK again to save the cropped copy to a separate ﬁle.

R Larger crops produce larger copies; all copies have an aspect ratio of 4:3. IIff tthhee ssiizzee ooff tthhee ﬁﬁnnaall

copyy wwill be a, YES will be ddisplayedd inn yyeelllloow.

ORESIZE

Create a small copy of the current picture.

Display the desired picture.

Select ORESIZE in the playback menu.

Highlight a size and press MENU/OK to display a conﬁrmation dialog.

Press MENU/OK to save the resized copy to a separate ﬁle.

R Thhee ssiizzeess aavailable vary with the size of the originnal image.

Menus

Using the Menus: Playback Mode

CIMAGE ROTATE

Rotate pictures taken in tall orientation so that they are displayed in tall orientation in the LCD

monitor.

Display the desired picture.

Select CIMAGE ROTATE in the playback menu.

Press the selector down to rotate the picture 90° clockwise, up to rotate it 90° counterclock-

wise.

Press MENU/OK. The picture automatically be displayed in the selected orientation whenever

it is played back on the camera.

R Protected pictures can not be rotated. Reemmoove protection before rotating pictures (P71).

R Thhee ccaammeerraa mmaayy nnoott bbee aabbllee ttoo rroottaattee ppiiccttuurreess ccrreeaatteedd wwiitthh ootthheerr ddeevices.

ECOPY

Copy pictures from internal memory to a memory card.

Select ECOPY in the playback menu.

Highlight one of the following options and press the selector right:

• aINTERNAL MEMORY y bCARD: Copy pictures from internal memory to a memory card.

• bCARD y aINTERNAL MEMORY: Copy pictures from a memory card to internal memory.

Highlight one of the following options and press MENU/OK:

• FRAME: Copy selected pictures. Press the selector left or right to view pictures and press

MENU/OK to copy the current picture.

• ALL FRAMES: Copy all pictures.

R Copyyiinngg eennddss wwhheenn tthhee ddestination is full.

R DPOF print information is not copied (P51).

Menus

Using the Menus: Playback Mode

STRANSITION

(defaults to OFF)

Choose the transition between images during playback.

Option

WIPE

Description

Choose for a wipe transition between images.

SLIDE-IN Images slide into the display.

FADE-IN

OFF

The next image fades in as the previous image fades out.

No transition between frames.

LMOVIE TRIMMING

Remove opening or ending footage to create an edited copy of the current movie.

Display the desired movie.

Select LMOVIE TRIMMING in the playback menu. To remove footage from the start of the

copy, proceed to Step 3; otherwise, proceed to Step 4.

Press the selector down to begin playback and press it down again when the new opening

frame is reached.

Press MENU/OK. To remove footage from the end of the copy, proceed to Step 5; otherwise,

proceed to Step 6 (to exit without creating an edited copy, press DISP/BACK).

Press the selector down to begin playback and press it down again when the new closing

frame is reached.

Press MENU/OK to save the copy.

Menus

Using the Menus: Playback Mode

MOVIE JOIN

Add existing footage to the end of the current movie to create an edited copy.

Display the desired movie.

Select MOVIE JOIN in the playback menu.

Press the selector left or right to highlight a movie.

Press MENU/OK to add the highlighted footage to the end of the current movie and save the

resulting copy, or press DISP/BACK to exit without creating a copy.

R Both mmoovies must have been recorded at thhe same ffrrame sizee and fraamme rate annd have a

combined ﬁle size of no more than 2 GB.

KPRINT ORDER (DPOF)

Select pictures for printing on DPOF- and PictBridge-compatible devices (P49).

Menus

The Setup MMenu

Using the Setup Menu

Display the setup menu.

1.1 Press MENU/OK to display the menu for the cur-

rent mode.

1.2 Press the selector left to highlight the tab for the current menu.

SET-UP

1.3 Press the selector down to highlight X.

SET

EXIT

tab

1.4 Press the selector right to place the cursor in the setup menu.

Adjust settings.

Highlight items and press the selector right to view options, then highlight

an option and press MENU/OK. Press DISP/BACK to exit when settings are

complete.

Menus

The Setup Menu

Setup Menu Options

FDATE/TIME

Set the camera clock (P18).

NTIME DIFFERENCE

(defaults to h)

Switch the camera clock instantly from your home time zone to the local time at your destina-

tion when traveling. To specify the diﬀerence between local time and your home time zone:

Highlight gLOCAL and press the selector right.

Use the selector to choose the time diﬀerence between local time and your home time zone

in increments of 15 minutes.

Press MENU/OK.

To switch between local time and your home time zone, highlight gLOCAL or hHOME and

press MENU/OK.

Option

Description

hHOME Switch to the time currently selected for FDATE/TIME (P18).

Switch to local time. If this option is selected, g and the time and date will be

displayed in yellow for three seconds each time the camera is turned on.

gLOCAL

(defaults to ENGLISH)

Choose a language (P104).

oSILENT MODE

(defaults to OFF)

Select ON to disable the speaker, ﬂash, and LED illuminator in situations in which camera sounds

or lights may be unwelcome (note that the ﬂash will still ﬁre in Cmode).

Menus

The Setup Menu

RRESET

Reset all settings except FDATE/TIME, NTIME DIFFERENCE, and QVIDEO SYSTEM to de-

fault values.

Highlight RRESET and press the selector right to display a conﬁrmation dialog.

Highlight OK and press MENU/OK.

KFORMAT

If a memory card is inserted in the camera, this option will format the memory card. If no mem-

ory card is inserted, this option will format internal memory. Select OK to begin formatting.

Q All datta—inncluding prroteccted ppiictures—willl be ddeleteed froomm the mmeemory ccard oor internal

memory. Be ssure impoortant ﬁﬁles havvee been copied to a computer or other storaaggee ddeevice.

Q Do not opeen the battttery cover during formatting.

AIMAGE DISP.

(defaults to 1.5 SEC)

Choose how long pictures are displayed in the LCD monitor after shooting.

Option

3 SEC

Description

Pictures are displayed for three seconds (3 SEC) or 1.5 seconds (1.5 SEC).

Colors may diﬀer slightly from those in the ﬁnal image.

1.5 SEC

ZOOOOMM ((CCOONTINUOUS) Pictures are displayed until the MENU/OK button is pressed.

OFF Pictures are not displayed after shooting.

R OFF has no eﬀect in continuous shooting mode.

Menus

The Setup Menu

BFRAME NO.

(defaults to CONT.)

New pictures are stored in image ﬁles named using a four-digit ﬁle

number assigned by adding one to the last ﬁle number used. The ﬁle

number is displayed during playback as shown at right. BFRAME NO.

controls whether ﬁle numbering is reset to 0001 when a new memory Directory

card is inserted or the current memory card or internal memory is for- number

matted.

Frame number

100-0001

File

number

Option

Description

Numbering continues from the last ﬁle number used or the ﬁrst available ﬁle num-

CONTINUOUS ber, whichever is higher. Choose this option to reduce the number of pictures

with duplicate ﬁle names.

Numbering is reset to 0001 after formatting or when a new memory card is in-

serted.

RENEW

R If the frame number reaches 999-9999, the shutter release will be disabled (P96).

R Seelleecctting RRESET (P78) sets BFRAAME NO. to CONTINUOUS but does not reset the ﬁle

number.

R Frame numbers for pictures taken with other cameras may diﬀer.

Menus

The Setup Menu

GOPERATTIONN VVOL.

(defaults to c)

Adjust the volume of the sounds produced when camera controls are operated. Choose f

(mute) to disable control sounds.

HSHUTTEER VOLUME

(defaults to c)

Adjust the volume of the sounds produced when the shutter is released. Choose f (mute)

to disable the shutter sound.

eSOUND

(defaults to i)

(defaults to 7)

Choose the sounds used for the shutter, at startup, and for camera controls.

IPLAAYYBBAACK VOLUME

Adjust the volume for movie playback.

JLCD BRIGHTNESS

(defaults to AUTO)

Control the brightness of the display.

Option

AUTO

Description

Display brightness is automatically adjusted during shooting in response to ambi-

ent lighting conditions. Brightness is not adjusted during playback.

Press the selector up or down to adjust brightness and then press MENU/OK.

Choose from values between –5 and +5.

MANUAL

Menus

The Setup Menu

ELCD MODE

(defaults to UON)

Choose whether the display automatically dims to save power in shooting mode. This option

does not take eﬀect during playback.

Option

Description

The display dims to save power if no operations are performed for a few

UPOWER SAVE ON seconds. Normal brightness can be restored by pressing the shutter but-

ton halfway.

QPOWER SAVE OFF Automatic dimming oﬀ.

MAUTO PPOWER OFF

(defaults to 2 MIN)

Choose the length of time before the camera turns oﬀ automatically when no operations are

performed. Shorter times increase battery life; if OFF is selected, the camera must be turned

oﬀ manually. Note that in some situations the camera turns oﬀ automatically even when OFF

is selected.

LDUAL IS MODE

(defaults to l)

Choose whether image stabilization is performed at all times when the camera is in shooting

mode (lCONTINUOUS), or only when the shutter button is pressed halfway (mSHOOT-

ING ONLY). Choose OFF to turn image stabilization oﬀ when using a tripod.

BRED EYE RREMOVAL

(defaults to ON)

Choose ON to remove red-eye eﬀects caused by the ﬂash when shooting with Intelligent Face

Detection.

R Reedd--eeyyee rreedduuccttiioonn iiss ppeerfoormed oonly when a face iss ddeetteecctteedd..

Menus

The Setup Menu

DDIGITAL ZOOM

(defaults to OFF)

If ON is selected, selecting T at the maximum optical zoom position will trigger digital zoom,

further magnifying the image.

Thhe Zoooomm IInnddicattoor

DIGITAL ZOOM on

Optical zoom

Digital zoom

DIGITAL ZOOM oﬀ

Q Digital zooom prrooducess lower quality images than optical zoom.

nSAVE ORG IMAGE

(defaults to OFF)

Select ON to save unprocessed copies of pictures taken with red-eye removal.

cGUIDANCE DISPPLLAY

(defaults to ON)

Choose whether to display tool tips.

Menus

The Setup Menu

QVIDEO SYSTEM

(defaults to NTSC)

Choose a video mode for connection to a TV. SECAM is not supported.

Option

NTSC

Description

Select this mode for connection to video devices in North America, the Carib-

bean, parts of Latin America, and some East Asian countries.

Select this mode for connection to video devices in the United Kingdom and

much of Europe, Australia, New Zealand, and parts of Asia and Africa.

PAL

Menus

Technical Notes

Oppttiioonnaall AAcccesssoories

The camera supports a wide range of accessories from FUJIFILM and other

manufacturers.

DIGITAL CAMERA

■ Printing

■ Audio/Visual

FINEPIX XP20 Series

A/V cable (optional)

USB cable

(supplied)

TV^*

PictBridge-compatible

printer^*

SD/SDHC/SDXC

memory card

HDMI cable

(sold separately)

HDTV^*

Printer^*

HDP-L1

HD player ^†

†SDXC cards not supported.

■ Coommpputer Reellatteedd

USB cable (supplied)

SD card slot or card reader

Computer^*

* Available separately.

Optional Accessories

Accessories from FUJIFILM

The following optional accessories are available from FUJIFILM. For the lat-

est information on the accessories available in your region, check with your

local FUJIFILM representative or visit http://www.fujifilm.com/products/digital_

cameras/index.html.

Recharggeeable NP-45A: Additional large-capacity NP-45A rechargeable

Li-ion batteries batteries can be purchased as required.

BC-45W: Replacement battery chargers can be purchased

as required. The BC-45W charges an NP-45A battery in

about 120 minutes at +20°C (+68°F).

Battery

chargers

A/V cable

AV-C1: Use for viewing pictures on TV.

HDP-L1 (requires HDMI cable, available from third-party suppliers): Con-

nect to a High Deﬁnition (HD) TV to view photographs

and movies from SD/SDHC memory cards.

HD players

Technical Notes

Caring for the Camera

To ensure continued enjoyment of the product, observe the following pre-

cautions.

Storage and Use

If the camera will not be used for an ■ Condensation

extended period, remove the battery Sudden increases in temperature,

and memory card. Do not store or such as occur when entering a heated

use the camera in locations that are:

• exposed to rain, steam, or smoke

• very humid or extremely dusty

building on a cold day, can cause con-

densation inside the camera. If this

occurs, turn the camera oﬀ and wait

• exposed to direct sunlight or very an hour before turning it on again. If

high temperatures, such as in a condensation forms on the memory

closed vehicle on a sunny day

• extremely cold

card, remove the card and wait for the

condensation to dissipate.

• subject to strong vibration

• exposed to strong magnetic ﬁelds,

such as near a broadcasting anten-

na, power line, radar emitter, motor,

transformer, or magnet

• in contact with volatile chemicals

such as pesticides

• next to rubber or vinyl products

Technical Notes

Caring for the Camera

Cleaning

Use a blower to remove dust from the protective glass covering the lens and

LCD monitor, then gently wipe with a soft, dry cloth. Any remaining stains can

be removed by wiping gently with a piece of FUJIFILM lens-cleaning paper to

which a small amount of lens-cleaning ﬂuid has been applied. Care should

be taken to avoid scratching the protective glass or LCD monitor. The camera

body can be cleaned with a soft, dry cloth. Do not use alcohol, thinner, or

other volatile chemicals.

Traveling

Keep the camera in your carry-on baggage. Checked baggage may suﬀer

violent shocks that could damage the camera.

Technical Notes

Troubleshooting

Problems and Solutions

Water in the Camera

Problem

Solution

The batttery--chamber cover was not fully closed befoorree tthhee ccamera was immerseed, or wass opened

under watter: Taake thee caammeerraa ttoo aa FFUUJJIIFFIILLMM--aauutthhoorriizzeedd sseerrvviiccee tteecchhnniicciiaann ffor rreeppaaiirrss.. DDoo nnoott ttuurrnn

the cameera on.

Water in the camera

Power and Battery

Problem

Solution

• Thhee bbaattery is exhausted: Charge the battery or insert a fully--cchhaarrggeedd spare battery (P7).

• Thhee bbaattery is inserted inccorrectly: Reinsert in the correct orientation (P10).

• Thhee bbaatttteerry-chamber cover is not latched: Latch the battteerryy-chaambbeerr ccoovveerr ((P10).

The cameraa does noot

turn on.

• Thhee bbattery is cold: Warm the battery by placing it in a pocket or other warm place and reinsert

it in thhe caammeerraa iimmmmeeddiiaatteellyy bbeeffore ttakking a picture.

• Thheerree iiss ddiirrtt oonn tthhee bbaatttteerryy tteerminals: Clean the terminals with a soft, dryy cloth.

The battery runs down • Q is selected for shooting mode: Select B mode to reduce the drain on the battery

quickly.

(P24).

• xTRACKING is selected for FAF MODE: Select a diﬀerent AF mode (P66).

• Thhee bbaatttery has been charggeedd mmaannyy ttiimmes: The battery has reached the end of its charging

life. Purchase a new battery.

The cameraa turns ooﬀ

suddenly.

Charge the battery or insert a fully--cchhaarrggeedd sspare battery (P7).

Problems and Solutions

Problem

Charging does not start. Reinsert the battery in the correct orientation aanndd mmaakkee ssuurree tthhaatt tthhee cchhaarrggeerr iiss pplluuggggeedd iinn ((P7).

Charging is slow.

Charge the battery at room temperaturre (Pvi).

Solution

The charging lamp lights, • Thheerree iiss ddiirrtt oonn tthhee bbaatttteerryy tteerminals: Clean the terminals with a soft, drry cloth.

but the battery does not • Thhee bbattery has been charged many times: The battery has reached the end of its charg-

charge.

ing life. Purchase a new battery. If the battery still fails to charge, contact your FUJIFILM dealer.

Menus and Displays

Problem

Solution

Menus and displays are

not inn English.

Select ENGLISH for La (P18, 77).

Shooting

Problem

Solution

• Memory is full: Insert a new memory cardd or deeletee ppictures (P11, 40).

• Memory is not formatted: Format the memory card orr inteerrnal memory (P78).

• Thheeree iiss ddiirrtt oonn tthhee mmemory cardd ccoonnttacts: Clleeaann tthhee ccoonnttaaccttss wwiitthh aa ssoofft, dry cloth.

• Thhee memory cardd iiss ddaamaged: Insert a new memory card (P11).

• Thhee bbaattery is exhausted: Charge the battery or insert a fully--cchhaarrggeedd spare battery (P7).

• Thhee ccaamera has turned oﬀ automatically: Turn the cammera on (P16).

• Thhee iinnddicator lamp was orange when youu attempptted to recordd aa ppaannoorraammaa: Waiit until

the indicattor lammpps turnss oﬀ (P3).

Noo ppiiccture is taken when

the shutter button is

pressed.

The LCD monitor goes

dark aftter shhooting.

The LCD monitor may darken while the ﬂash charges. Wait for the ﬂash to charge (P34).

Troubleshooting

Problems and Solutions

Problem

Solution

• Thhee ssuubbjjeecct is close to the camera: Select macro mode (P33).

• Thhee ssuubject is far away froomm tthhe camera: Cancel macro mode (P33).

• Thhee ssuubbjjeecct is not suited to autofocus: Use fooccus lock (P30).

The cameraa does noot

focus.

Macro mode is not

available

Choose a diﬀerent shooting mode (P24).

Intelligent Face Detection

is not available.

Choose a diﬀerent shooting mode (P24).

• Thhee ssuubject’s face is obscureedd bbyy sunglasses, a hat, long haiir, or otthher oobbjjeeccttss: Remove

the obsttructions.

• Thhee ssuubject’s face occupies onlyy a smalll area of the frame: Change the composition so that

the subject’s face occupiees a laarrger area off the frame (P30).

Noo fface is detected.

• Thhee ssuubbjjeecct’s head is tilted or horizontal: Ask thee subjectt to holdd ttheir heaad straight.

• Thhee ccaamera is tilted: Keep the camera leevel (P20).

• Thhee ssuubbjjeecctt’’ss ffaaccee iiss ppoooorrlly lit: Shoot in bright light.

Wrong subject is

selected.

The selected subject is closer to the center of the frame than the main subject. Recompose the

picture or turn face detection oﬀ and frame the picture using focuus lockk (P30).

• Thhee ﬂﬂaasshh iiss nnoott available in the curreenntt sshooting mode: Choose a diﬀerent shooting mode

(P24).

• Thhee bbaattery is exhausted: Charge the battery or insert a fully--cchhaarrggeedd spare battery (P7).

• Thhee ccaammeerraa is in continuous mode: Select OFF for RCONTINUOUS (P65).

• Thhee ccaammeerraa is in silent mode: Turn silent mode oﬀ (P77).

• Thhee ﬂaasshh is oﬀ (P): Choose a diﬀerent ﬂash mode (P34).

The ﬂash does not ﬁre.

Troubleshooting

Problems and Solutions

Problem

Solution

• Thhee ddeessireedd ﬂﬂaasshh mmooddee iiss nnoott aavvaaiillaabbllee iinn tthhee ccuurrreenntt sshhoooottiinngg mmooddee: Choose a diﬀerent

shooting mode (P24).

• Thhee ccaammeerraa is in silent mode: Turn silent mode oﬀ (P77).

Some ﬂash modes are

not available.

The ﬂash does not fully • Thhee ssuubbjjeecct is not in range of the ﬂash: Position the subject in range of the ﬂash (P104).

light the subject.

• Thhee ﬂﬂaasshh wwiinndow is obstructed: Hoolldd tthhee ccamera correctly (P20).

• Thhee pprrootteeccttiivvee ggllaassss ccoovveerriinngg tthhee lleennss iiss ddiirrttyy: Clean the glass (P87).

• Thhee prootteeccttiivvee ggllaassss ccoovering the lens is blockked: Keep objects away from the lens (P20).

• sis displayyed duringg shootinngg and the ffoocus framme is displlayed in rred: Check fooccus

before shooting (P94).

Pictures are blurred.

• kis displayed during shooting: Use the ﬂash or a tripod (P35).

This is normaal wheenn slow sshutteer speeeds are seleccted att high tteemmppeerraattuurreess aanndd ddooeess nnoott iinnddiiccaattee

a malfunction.

Pictures are mottled.

Vertical lines appear in The camera has been used continuously at high temperatures. Turn the caammeerraa ooﬀﬀ and wait for

pictures. it to cool down.

“Smear”in the form of Vertical purple or white lines may appear aftteerr tthe ccaammeerraa hhaass bbeeeenn uusseedd ccoonnttiinnuuoouussllyy aatt hhiigghh

vertical purple or white temperatures or when a very bright object is iinn tthhee ffrraammee;; tthhiiss pphheennoommeennoonn iiss ccoommmmoonn ttoo aallll CCCCDD

lines appears in the

display.

image sensors and does not indicate a maalfunctiion. Theese lineess are recorded in movies but do not

appear in photographs. Avoid framing bright objects when ﬁlming movies.

Sounds made by the

camera are recorded with Do not adjust zoom during shooting.

movies.

Troubleshooting

Problems and Solutions

Playback

Problem

Solution

Pictures are grainy.

The pictures were taken with a diﬀerentt mmaakkee oorr mmooddeell ooff ccamera.

Playback zoom is unavail-

able.

The cuurrrreennt piicturee is a reesizedd copy wwith a ssize of a.

• Playback volume is too low: Adjust playback volume (P80).

• Thhee microopphhoonnee wwaass oobstructed: Hoolldd tthhee ccamera correctly during recording (P20, 45).

• Thhee ssppeaker is obstructed: Hoolldd tthhee ccamera correctly during playback (P47).

Noo ssoouund in movie

playback.

Selected pictures are not Some of the pictures selected for deletion are protected. Remove protection using the deviiccee wwiitthh

deleted.

which it was originally applied (P71).

File numbering is

The battery-chamber cover was opened while the caammeerraa wwaass oonn.. TTuurrnn tthhee ccaammeerraa ooﬀﬀ bbeeffoorree

unexpectedly reset.

opening thhe baatttteerryy-chamberr ccoovveerr ((P16).

Troubleshooting

Problems and Solutions

Connections/Miscellaneous

Problem

Solution

• Thhee ccaamera is not prooppeerrlly connectedd: Connect the camera pproperlly (P48).

• An A/V cable was connected dduring movie playback: Coonnect thhe caammeerraa oonnccee mmoovviiee ppllaayy--

back has ended.

Noo ppiiccture or sound.

• Input on the television is set to “TV”: Set input to “VIDEO”.

• Thhee camera is not set tto the ccoorrrrect vviideo sttaannddaarrd: Match the camera QVIDEO SYS-

TEM setting to the TV (P83).

• Thhee vvoolume on the TV is too low: Adjust the volume.

Noo coolor

Match the cammera QVIDEO SYSTEM setting to the TV (P83).

The computer does not

recognize the camera.

Be sure the cameraa and coomputter aree correctly connected (P57).

Pictures caan not bbe

printed.

• Thhee ccaamera is not prooppeerrlly connectedd: Connect the camera ccorrecttly (P49).

• Thhee pprrinter is oﬀ: Turn the printer on.

Only one copy is printed/

the date is not printed.

The printer is not PictBriidge commpatible.

• Temporary camera malfunction: Remove and reinsert the battery (P9).

• Thhee bbaatttery is exhausted: Charge the battery (P7) or iinsert a ffully-charged spare bbattery

(P9).

The cameraa is unree-

sponsive.

The cameraa does noot

function as expected.

Remove and reinsert the battery (P9). If the problem persists, contact your FUJIFILM dealer.

Noo sound.

Turn silent mode oﬀ (P77).

Troubleshooting

Warning Messages and DDissplays

The following warnings are displayed in the LCD monitor:

Warning

B(red)

A(blinks red)

Description

Low batttery. Charge the battery (P7) or iinsert aa fullyy-charged spare battery (P9).

Battery eexhausteed. Charge the battery (P7) or inseert a fullly-charged spare battery (P9).

Slow shutter speed. Pictures may be blurred; use the ﬂash or a tripod.

The camerra caann nnoott ffocuuss.. TTrryy oonnee ooff tthhee ffolllowinng solutions:

• Use fooccuss lock to focus on annother suubject at the same distance, then recompose the picture

(P30).

(displayed in red with red

focus frame)

• Use macro mmode ttoo focus wwhenn ttaakking cloose-upps (P33).

The subjject iss too brrightt oor too ddark aannd the ppicturre wwiillll bbee oovveerr-- oorr uunnddeerr--eexxppoosseedd.. IIff tthhee ssuubbjjeecctt

is dark, use the ﬂash (P34).

Aperture or shutter speed

displayed in red

FOCUS ERROR

TURN OFF THE CAMERA

AND TURN ON AGAIN

Camera malfunction. Turn the caamera oﬀﬀ and then on again, takiinngg ccaarree nnoott ttoo ttoouucchh tthhee lleennss.. IIff

the message persists, contact a FUJIFILM dealer.

• Thhee mmemory cardd oorr iinntteerrnnal memory is not formmatted orr thhee mmeemmoorryy ccaarrdd was foorr--

matted in a computer or other device: Format the memory card orr internal memory using

the KFORMAT option in the camerra setup mmenu (P78).

• Thhee mmemory cardd ccoonntacts reeqquuiirree cclleeaanniinngg: Clean tthhee ccoonnttaaccttss wwiitthh aa ssoofft, dryy clotth. If

the message is repeated, format the card (P78). If the message persists, replace tthhee ccard.

• Caammeerra maalfunctiion: Contact a FUJIFILM dealer.

CARD NOT INITIALIZED

PROTECTED CARD

BUSY

The memory caard is locked. Unlock the ccard (P11).

The memory caard is inncorrecctly formatted. Use the caamera too format the caard (P78).

Troubleshooting

Warning Messages and Displays

Description

Warning

The memory card iss not formatted for use in the camera. Format the carrd (P78).

The memory carrd contaccts requiire cleaniing or the memory card is daamaged. CClean the contacts

with a softt,, ddrryy cclloth.. If the meesssage is reepeated, foorrmmaatt tthhee ccard (P78). If the message persists,

replace the card.

CARD ERROR

Incompatible memory card. Usse a compatible card (P14).

Camera malfunction. Contact a FUJIFILM dealer.

aMEMORY FULL

bMEMORY FULL

INTERNAL MEMORY IS

FULL

The memory carrd or intternal memory is full and pictures ccan not be recorded oorr copiieedd.. DDeelleettee

pictures or insert a memory caard withh more free space.

INSERT A NEEW CARD

• Memory caard erroorr oorr ccoonnnneeccttiioonn eerrrroorr: Reinsert tthhee ccard oorr ttuurrnn tthhee ccaammeerraa ooﬀﬀ aanndd tthheenn

on again. If the message persists, contact a FUJIFILM dealer.

• Noott eennoough memory reemmaaining to reeccordd aaddddiittiioonnal pictureess: Delete pictures or insert

a memory cardd with moore freee space.

• Thhee memory cardd oorr iinntteernal memory is not fformattted: Format the memory card or

internal memory (P78).

• Thhee ﬁﬁllee iiss ccoorrupt or was not creeaatteedd with the camera: The ﬁle can nnot be viiewed.

• Thhee mmemory cardd ccoonntacts reeqquuiirree cclleeaanniinngg: Clean tthhee ccoonnttaaccttss wwiitthh aa ssoofft, dryy clotth. If

the message is repeated, format the card (P78). If the message persists, replace tthhee ccard.

• Caammeerra maalfunctiion: Contact a FUJIFILM dealer.

WRITE ERROR

READ ERROR

Troubleshooting

Warning Messages and Displays

Warning

Description

The caammeerraa hhaass rrun out of frame numbers (current frame number iiss 999999--99999999)).. FFoorrmmaatt tthhee

memory caard annd select RENEW for BFRAME NO. in the setup menu. Take aa ppiiccttuurree

to reset frame numbering to 100-0001, then select CONTINUOUS for BFRAME NO

(P79).

FRAME NO. FULL

PRESS AND HOLD

THE DISP BUUTTON TO

DEACTIVATE SILENT MODE

An attempt was made to choose a ﬂash mode or aadjust the volume witth the caammeerraa iinn ssiilleenntt

mode. Exit silent mode before choosing a ﬂash mode or adjusting the volume (P77).

A search has returned more than 5,000 rreessuullttss,, oorr mmoorree tthhaann 999999 ffrraammeess wweerree sseelleecctteedd ffoorr ddeellee--

tion. Peerform aa diﬀereent searrch or seeleecctt ffeewer picctures.

TOO MANY FRAMES

PROTECTED FRAME

aCAN NOT CROP

CAN NOT CROP

An attempt was made to delete to a protected picture. Remove protection and try again (P71).

apictures can nott be croopped.

The picture is damaged or was not createedd wwiitthh tthhee ccamera.

PCANNOTT EXECUTE

QCANNOTT EXECUTE

aCANNOTT EXECUTE

CAN NOT ROTATE

An attempt was made to create a resized copy at a size equal to or larger than the original.

Choose a smaller size.

An attempt was made to rotate a picture that can not be rotated.

FCAN NOT ROTATE Movies can not be rotated.

CANNOT EXECUTE

FCANNOT EEXECUTE

Retouch and red-eye removal are not available wwiitthh mmoovviieess,, ppiiccttuurreess ttaakkeenn wwiitthh ootthheerr ccaammeerraass,,

or pictures that can nott be playyed back.

Troubleshooting

Warning Messages and Displays

Description

Warning

Noo mmeemmoorryy ccaarrdd iinnsseerrtteedd wwhheenn ECOPY is selected in the playback menu. Insert a memory

card.

NO CARD

bNO IMAGE

aNO IMAGE

The souurce seelecteedd ffor ECOPY contains no images. Select a diﬀerent source.

The DPOF print order on the current memory caarrdd ccoonnttaaiinnss mmoorree tthhaann 999999 iimmaaggeess.. CCooppyy tthhe

pictures to internal memory and create a new print order.

DPOF FILE ERROR

CAN NOT SET DPOF

The picture caan not be pprintedd uusing DPOF.

FCAN NOT SET DPOF Movies can not be printed using DPOF.

A connection error occuurrrreedd wwhhiillee picturees werre beiinng printedd or coopied tto a coomputeer or other

device. Conﬁrm that the device is turned on and that the USB caable iss conneected.

Printer oout of papeer or ink, or other printer error. Chheck pprriinter (see printer manual foorr ddeettaaiillss))..

To resume printing, turn the printer oﬀ and then turn it back on.

COMMUNICATION ERROR

PRINTER ERROR

RESUME?

Printer out of paper or ink, or other pprriinntteerr eerrrroorr.. Check printer (see printer manual for details). If

printing does not resume automatically, press MENU/OK to resume.

An aatttteemmpptt wwaass mmaaddee ttoo pprriinntt aa mmoovviiee,, aa ppiiccttuurree nnoott ccrreeaatteedd wwiitthh tthhee ccaammeerraa,, oorr aa ppiiccttuurree iinn aa

format not supported by the printer. Movies and some picturres creatted with oother devvices caann

CANNOT BE PRINTED not be printed; if the picture is a ssttiillll ppiiccttuurree ccrreeaatteedd wwiitthh tthhee ccamera, check the pprriinntteerr mmaannuuaall

to conﬁﬁrm that the priinterr ssupports thhe JFIIFF-JPEGG or Exxif-JPEG foorrmmaatt.. IIff iitt ddooeess nnoott,, tthhee ppiiccttuurreess

can not be pprinted.

Troubleshooting

Appendix

Tips and Tricks

The following tips and tricks will help you get the most from your camera.

Battery Performance

Choose the following settings for improved battery performance:

• bFACE DETECTION (P65): OFF

• FAF MODE (P66): r CENTER

• qLED ILLUMINATOR (P66): OFF

• ELCD MODE (P81): UPOWER SAVE ON

• LDUAL IS MODE (P81): OFF

Thhee SSeellff-timer

• To prevent blur caused by the camera moving when the shutter button is pressed,

use the two-second timer.

• To take a group portrait that includes the photographer, use the group timer. The timer

will not start until the person who has pressed the shutter button appears in the

frame.

Tips and Tricks

Intelligent Face Detection

When ON is selected for bFACE DETECTION (P65), you can:

• Zoom in on faces when ZOOM (CONTINUOUS) is selected for AIM-

AGE DISP. (P78).

Shooting

• Remove red-eye by selecting ON for BRED EYE REMOVAL (P81).

• Zoom in on faces during slide shows (P70) or by pressing the selector

down during playback.

Playback

• Search for faces using bIMAGE SEARCH (P41).

• Crop the background from portraits using GCROP (P72).

• Print one copy for each person in the photo.

Printing

Appendix

Tips and Tricks

Proo TTips

• To photograph the same scene both with and without the

ﬂash, select CNATURAL & N for ASHOOTING MODE

(P24). Use multi-frame playback (P39) to compare the two

shots.

• To photograph subjects that are in motion, select xTRACK-

ING for FAF MODE (P66).

• To photograph poorly-lit subjects close to the camera, select

ON for qLED ILLUMINATOR (P66).

• To ﬁne-tune brightness of a photograph, select P PROGRAM

AE (P24) for ASHOOTING MODE, choose an appropriate

white balance option (P64), and adjust exposure compensa-

tion (P32).

100

Appendix

Innteerrnnaall MMeemmoorryy//MMeemmoorryy CCaarrdd CCaappaacciittyy

The following table shows the recording time or number of pictures available

at diﬀerent image sizes. All ﬁgures are approximate; ﬁle size varies with the

scene recorded, producing wide variations in the number of ﬁles that can be

stored. The number of exposures or length remaining may not diminish at an

even rate. A limited number of test pictures can be taken when no memory

card is inserted.

Medium Internal memory

2 GB

NORMAL

4 GB

NORMAL

8 GB

NORMAL

(apprrox. 10 MB)

FINE

NORMAL

FINE

320

410

630

820

FINE

640

830

1260

1640

2860

4150

FINE

1290

1680

2540

3290

5740

8330

O4:3

O16:9

P4:3

P16:9

Q4:3

Q16:9

h1280^†

550

780

1100

1540

2350

2830

1100

1570

2200

3090

4710

5680

2210

3160

4420

6200

9450

11400

1420

2070

1sec.

6sec.

11min.

28min.

24min.

58min.

48min.

116min.

* Individual movie ﬁles can not exceed 2 GB in size.

†Use a G card or better when shooting HD movies.

Appendix

101

Speciﬁccaattions

System

Model

Eﬀective pixels

CCD

Digital Camera FinePix XP20 Series

14.2 million

12.3-in. square pixel CCD with primary color ﬁlter

Storage media

File system

• Interrnal meemory (approx. 10 MB)

Compliant with Desiggn Rulee for Camera File System (DCF), Exif 2.3, and Digital Print Order

Format (DPOF)

• SD/SDHC/SDXC memory cards

File format

• Still ppicturres: Exif 2.3 JPEG (compressed)

• Movies: AAVI-fformat Motion JPEG

Image size (pixels)

• O4 : 3: 4,320 × 3,240

• P4 : 3: 3,072 × 2,304

• Q4 : 3: 2,048 × 1,536

• O16 : 9: 4,320 × 2,432

• P16 : 9: 3,072 × 1,728

• Q16 : 9: 1,920 × 1,080

Leens

Fujinon 5 × opticall zoom lens,, F3.99 (wide angle) – F4.9 (telephoto)

Focal length

Digital zoom

f=5.0 mm–25.0 mm (35-mm forrmat equivalent: 28 mm–140 mm)

• 4 : 3: Approx. 6.8 × (upp to 34 ×× whenn ccombinned witth opttiical zoom)

• 16 : 9: Approx. 5.1 × (uup to 255 × whenn combiined wiith opttical zoom)

Aperture

F3.9/F6.2 (wide angle), F4.9/F8.0 (telephoto)

Focus range

(distance from front of lens)

Apppprrooxx.. 6600 ccmm ((22..00 fft.)–inﬁnityy (wide angle); 1.0 m (3.33 fft..)–inﬁnity (telephoto)

•

Maaccrro: approx. 9 cm–80 ccmm//33..55 iinn..––22..66 fft. (wide angle); 40 cm––8800 ccmm//11..33 fftt..––22..66 fftt.. (telephoto)

102

Appendix

Speciﬁcations

System

Sensitivity

Metering

Sttaannddaarrdd ooutput sensitivity equivalent to ISO 100,, 200, 4000, 800, 11600, 322000; AUTO

256-segment through-the-lens (TTL)

Exposurre control

Programmed AE

Exposure compensation –2 EV – +2 EV in increments of 13EV

Image stabilization

Shutter speed

(combined mechaniccal and • Other modes: 4 s–12,000s

Optical staabilization

• AUTO mode: 14s–12,000s

electronic shutter)

Coonnttinuous

Focus

Up to 0.8 fps, max. 3 frames

• Mode: Sinngle AF

• Focus--area selection: CENTER, TRACKING

• Autofoocus syystem: Contrast-detect TTL AF

White balance

Automatic scene detection; six manual preset modes foorr ddiirreecctt ssuunnlliigghhtt,, sshhaaddee,, ddaayylliigghhtt ﬂﬂuuoorreess--

cent, warm white ﬂuorescent, cool whittee ﬂﬂuuoorreesscceenntt,, aanndd iinnccandescent

Appendix

103

Speciﬁcations

System

Self-timer

Flash

Oﬀ, 2 sec., 10 sec., a (COUPLE TIMER), g (GROUP TIMER)

Auto ﬂash; eﬀective range when sensitivity is set to AUTO is approx. 700 ccmm––33..11 mm//22..33 fft.–

10.22 fft. (wide aanglee), 70 cm––22..77 mm//22..33 fftt..––88..99 fftt.. (telephoto); eﬀﬀective raange in maccro moode is

approx. 30 ccmm––8800 ccmm//11..00 fftt..––22..66 fftt..

Flash mode

Auto, ﬁlll ﬂashh, oﬀ,, sslow ssyync (reed-eyee remmooval oﬀ); aauto with reed-eyyee removvaall,, ﬁﬁllll ﬂﬂaasshh wwiitthh rreedd--

eye removal, oﬀ, slow sync with red-eye removal (red-eyye remmooval on)

LCD monitor

Movies

2.7-in., 230 k-dot color LCD monitor; frame coverage approx. 96 %

Frame size h1280 (1,280 × 720) or f(640 × 480); 30 fps; monaural sound

Languages

Arabic, Buulgariian, Siimmpplliiﬁﬁeedd CChhiinneessee,, TTrraaddiittiioonnaall CChhiinneessee,, CCzzeecchh,, DDaanniisshh,, DDuuttcchh,, EEngllish, FFarrssii,,

Finnish, French, Geerman, Greeek, Hebrew, Hunnggaarriiaann,, IInnddoonneessiiaann,, IIttaalliiaann,, JJaappaanneessee,, KKaazzaakkhh,,

Korean, LLatvian, Lithuanian, Noorrwweeggiiaann,, PPoolliisshh,, PPoorrttuugguueessee,, RRoommanian, Russian, Serbian,

Slovak,, Sppaanniisshh,, SSwweeddiisshh,, TThhaaii,, TTuurrkkish, Ukkrainian, Vietnamese

Input/output terminals

A/V OUT

NTSC or PAL output with monaural sound

(audio/video output)

Digital input/output

USB 2.0 High-Speeed; sharees A/V OUT cconnector, MTP/PTP

104

Appendix

Speciﬁcations

Power supply/other

Power suppplly

NP-45A rechargeable battery

Battery life (approximate

numberr of fraames thhaatt ccan

be takeen withh a fullly-charged

battery)

Battery type

NP-45A (type supplied with cammera)

Approoximate number of frames

200

CIPA standdard, meeaasured inn B (auto) mode using battery supplied with caamera andd SD mem-

ory card.

Notte: NNumbeerr of shots thaat can bbee ttaakkeenn wwiitthh bbaatttteerryy vaariess wwiitthh bbaatttteerryy cchhaarrggee lleevveell aanndd wwiillll

decline at low temperatures.

Caammeerra dimmensions

99.2 mm × 67.7 mm × 23.1 mm/3.9 in. × 2.7 in. × 0.9 in., excluding projections

(W × H × D)

Caammera wweight

Shooting weight

Operating conditions

Approx. 145 g/5.1 oz., excluding battery, accessories, and memory card

Approx. 162 g/5.7 oz., including battery and memory card

• Temperratuurre: –10 °C – +40 °C/+14 °F – +104 °F

• Humidity: 10% – 80% (no condensation)

Appendix

105

Speciﬁcations

NP-45A rechargeable battery

Noommiinnaall voltage

Noommiinnaall ccaappaacciitty

DC 3.7V

720 mAh

Operating temperattuurre 0 °C – +40 °C/+32 °F – +104 °F

Dimensions (W × H × D) 31.0 mm × 39.6 mm × 6.0 mm/1.2 in. × 1.6 in. × 0.2 in.

Weight

Approx. 15.5 g/0.5 oz.

BC-45B battery charger

Rated input

Input capacitty

100V–240V AC,, 5500//6600 HHz

6.0V (100 V/240VA)

Rated output

4.2V DC, 550 mA

Supported batteries

Charging time

NP-45A rechargeable batteries

Approx. 120 minutes (+20 °C/+68 °F)

Operating temperattuurre 0 °C – +40 °C/+32 °F – +104 °F

Dimensions (W × H × D) 46 mm × 91 mm × 23 mm/1.8 in. × 3.6 in. × 0.9 in., excluding projections

Weight

Approx. 65 g/2.3 oz., excluding battery

Weight and dimensions vary with the country or region of sale.

106

Appendix

Speciﬁcations

■ Noottiices

• Speciﬁcations subject to change without notice. FUJIFILM shall not be held liable for

damages resulting from errors in this manual.

• Although the LCD monitor is manufactured using advanced high-precision technol-

ogy, small bright points and anomalous colors may appear, particularly in the vicinity

of text. This is normal for this type of LCD monitor and does not indicate a malfunc-

tion; images recorded with the camera are unaﬀected.

• Digital cameras may malfunction when exposed to strong radio interference (e.g.,

electric ﬁelds, static electricity, or line noise).

• Due to the type of lens used, some distortion may occur at the periphery of images.

This is normal.

Appendix

107

7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN

http://www.fujifilm.com/products/digital_cameras/index.html

Restrictions on Camera Settings

The options available in each shooting mode are listed below.

Shooting Mode

Option

B P

✔ ✔ ✔

L Z M rN O

QR S F t s U V

✔ ✔ ✔ ✔ ✔ ✔¹

AUTO

✔ ✔

✔

BOFF

✔ ✔ ✔ ✔¹

✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔

✔ ✔

✔ ✔ ✔

✔ ✔

✔

BON L ✔ ✔ ✔ ✔¹

✔ ✔ ✔

✔ ✔

✔

✔ ✔ ✔

✔¹✔ ✔ ✔¹✔¹✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔¹✔ ✔

S/R ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

a/g ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹

✔

✔¹✔¹

✔

✔¹✔¹✔ ✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹

AUTO

3200

1600

800

400

200

✔

100

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔¹✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

Restrictions on Camera Settings

Shooting Mode

L Z M rN O QR S F t s U V

Option

B P

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔

✔ ✔ ✔

✔

OFF

✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔

✔

✔¹✔ ✔ ✔ ✔ ✔ ✔ ✔¹✔¹✔¹✔ ✔ ✔ ✔ ✔ ✔¹✔¹✔¹✔ ✔¹✔¹

✔ ✔ ✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹

✔ ✔

OFF

h1280

✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

OFF

✔²✔ ✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

1 Automatically optimized for selected shooting mode.

2 OFF only.

Alphasonik PTZ20TE User Manual
Arcam Integrated Amplifier, Power Amplifier P35 User Manual
Baxi Potterton HE Plus A User Manual
Canon Optura 10 User Manual
Fortec Cable Box FSHD 4700 User Manual
FujiFilm Digital Camera F750EXR User Manual
Hitachi VM E575LA User Manual
Hypertec N17158PHY User Manual
JVC 0305MNMMDWJEIN User Manual
JVC GC FM1AA User Manual