Camera User Guide
•
•
ake ead is guide, including the Safety
Precautre using the camera.
Reading thiguide will help you learn to use the camera
propey.
Sthis guide safely so that you can use it in the future.
ENGLISH
Read This First
Test Shots and Disclaimer
Take some initial test shots and play them back to make sure the images
were recorded correctly. Please note that Canon Inc., its subsidiaries and
affiliates, and its distributors are not liable for any consequential damages
arising from any malfunction of a camera or accessory, including memory
cards, that results in the failure of an image to be recorded or to be recorded
in a way that is machine readable.
Warning Against Copyright Infringement
The images recorded with this camera are intended for personal use. Do not
record images that infringe upon copyright laws without the prior permission
of the copyright holder. Please be advised that in certain cases the copying
of images from performances, exhibitions, or cmmercial properties by
means of a camera or other device may contrane copyright or other legal
rights even if the image was shot for persona.
Warranty Limitations
This camera’s warranty is ectiin the country of sale. If there is a
problem with the camera ad, lease return it to the country of sale
before proceedinwia waim to a Canon Customer Support Help
Desk. For CanoCustomer t contacts, please see the customer
support list suppd with our camera.
LCD Monitor (Screen)
•
The LCD monitor is produced with extremely high-precision manufacturing
techniques. More than 99.99% of the pixels operate to specification, but
occasionally non-performing pixels may appear as bright or dark dots. This
is not a malfunction and has no effect on the recorded image.
The LCD monitor may be covered with a thin plastic film for protection
against scratches during shipment. If so, remove the film before using the
camera.
•
Camera Body Temperature
Please take care when operating the camera for an extended period as the
camera body may become warm. This is not a malfunction.
3
What Do You Want to Do?
Shoot
z Shoot, leaving it to the camera to make settings .........................20
Take good people shots
I
w
P
V
Kids and pets
(p. 58)
Portraits
At the beach
(p. 59)
Against snow
(p. 59)
(p. 58)
Shoot various other scenes
O U t
Low Light
(p. 59)
Foliage
(p. 5
Sunsets
(p. 59)
Fireworks
(p. 60)
Shoot with speial effects
Super vivid colors
(p. 61)
Poster Effect
(p. 61)
z
Focus on faces..................................................................20, 58, 73
z Shoot in places where I cannot use the flash
(turn off the flash).........................................................................48
z Take pictures with me in them too (self-timer) .................52, 54, 62
z Insert the date and time into my shots .........................................51
4
What Do You Want to Do?
View
z Look at my pictures......................................................................23
1
z Automatically play back pictures (slideshow)...............................88
z Look at my pictures on a TV ........................................................91
z Look at my pictures on a computer..............................................28
z Quickly search pictures..........................................................86, 87
z Erase pictures ........................................................................24, 93
Shoot/View Movies
z Shoot movies ........................................................................25
E
z View movies..................................................................27
Print
z Easily print ictures...................................................................98
Save
z Save images to a computer .........................................................28
Other
z Turn off sounds ............................................................................42
3
z Use the camera abroad................................................................33
z Understand what is displayed on the screen .............................126
5
learn more as you read each chapter.
Checking the Package Contents .......2
Read This First ..................................3
What Do You Want to Do? ................4
Table of Contents ..............................6
Safety Precautions.............................8
Conventions Used in This Guide .....10
Returning the Camera to Default
Power Saving Function (Auto
Power Down) ................................ 45
Used Functions .................47
Turning the Flash Off ...................... 48
1
Zooming in More Closely on
Compatible Memory Cards
(Sold Separately)...........................12
InsertinhDate and Time............ 51
Inserting the Batteries and Memory
Card...............................................12
Pressing the Shutter utton........
Erasing Images................................24
Shooting Movies ..............................25
Viewing Movies................................27
Adding Effects and Shooting
Adding Effects and Shooting........... 61
Using the Face Self-Timer .............. 62
Transferring Images to a Computer
for Viewing.....................................28
Accessories .....................................32
2
Adjusting the Brightness
(Exposure Compensation) ............ 67
Components Guide..........................36
Screen Display.................................38
Indicator...........................................39
FUNC. Menu – Basic Operations ....40
MENU – Basic Operations...............41
Changing the Sound Settings..........42
Turning the Flash On ...................... 67
Adjusting the White Balance ........... 68
Changing the ISO Speed ................ 69
Continuous Shooting....................... 70
6
Changing the Tone of an Image (My
Colors) .......................................... 71
Shooting Close-ups (Macro) ........... 72
Shooting Far Away Subjects
Changing the AF Frame Mode........ 73
Magnifying the Focal Point.............. 75
Shooting with the AF Lock .............. 76
Changing the Metering Method....... 76
Shooting with the AE Lock.............. 77
Shooting with the FE Lock .............. 77
Shooting with Slow Synchro ........... 78
Red-Eye Correction ........................ 79
8
Choosing Images for Printing
(DPOF)........................................105
Settings ........................... 109
Shooting Using a TV as the
6
Using Various Functions for
AE Lock/ExposuShift ........
Other Shooting Fctions ............... 84
10 Useful Information.......... 117
7
Editing Functions..............85
Quickly Searching Images .............. 86
Searching for Images Using
the Jump Display .......................... 87
Functions Available in Each
Shooting Mode............................130
Viewing Slideshows ........................ 88
Checking the Focus ........................ 89
Magnifying Images.......................... 90
Changing Image Transitions........... 90
Viewing Images on a TV................. 91
Menus............................................134
Handling Precautions ....................138
Specifications ................................139
Index..............................................141
7
Safety Precautions
• Before using the product, please ensure that you read the safety precautions described
below. Always ensure that the product is used correctly.
• The safety precautions noted on the following pages are intended to prevent injuries to
yourself and other persons, or damage to the equipment.
• Be sure to also check the guides included with any separately sold accessories you
use.
Denotes the possibility of serious injury or death.
Warning
• Do not trigger the flash in close proximity to people’s eyes.
Exposure to the intense light produced by the flash could damage eyesight. In particular,
remain at least one meter (39 inches) away from infants when using the flash.
• Store this equipment out of the reach of children and infants.
Strap: Putting the strap around a child’s neck could result in asphyxiation.
Time/date battery: Dangerous if swallowed. If this occurs, contact a doctor immediately.
• Use only recommended power sources.
• Do not attempt to disassemble, alter or apply heae product.
• Avoid dropping or subjecting the produevere iacts.
• To avoid the risk of injury, do not touch rior of e product if it has been
dropped or otherwise damaged.
• Stop using the product immeit es smoke, a strange smell, or
otherwise behaves abnormal
• Do not use organic lvts sohol, benzine, or thinner to clean the
equipment.
• Do not let the prodt come into cact with water (e.g. sea water) or other
liquids.
• Do not allow liquids oreiobjects to enter the camera.
This could result in electrical shock or fire.
If liquids or foreign objects come into contact with the camera interior, immediately turn
the camera power off and remove the batteries.
• Use only the recommended batteries.
• Do not place the batteries near or in direct flame.
The batteries may explode or leak, resulting in electrical shock or fire. This could cause
injury and damage the surroundings. In the event that batteries leak and the battery acid
contacts eyes, mouth, skin or clothing, immediately flush with water.
• Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the operation of
electronic instruments and other devices. Exercise adequate caution when using the
camera in places where use of electronic devices is restricted, such as inside airplanes
and medical facilities.
• Do not play the supplied CD-ROM(s) in any CD player that does not support data
CD-ROMs.
It is possible to suffer hearing loss from listening with headphones to the loud sounds of
a CD-ROM played on a music CD player. Additionally, playing the CD-ROM(s) in an audio
CD player (music player) could damage the speakers.
8
Safety Precautions
Denotes the possibility of injury.
Caution
• Be careful not to bang the camera or subject it to strong impacts or shocks when
hanging it by the strap.
• Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
• When using the flash, be careful not to cover it with your fingers or clothing.
This could result in burns or damage to the flash.
• Avoid using, placing or storing the product in the following places:
-
-
-
Places subject to strong sunlight
Places subject to temperatures above 40 °C (104 °F)
Humid or dusty areas
These could cause leakage, overheating or an explosion of the batteries, resulting in
electrical shock, fire, burns or other injuries.
Denotes the posdamato the equipment.
Caution
• Do not aim the camera at ht srces (such as the sun on a clear day).
Doing so may damage the im
• When using the amera on at a windy location, be careful not to allow
dust or sand to nter the cam
This may cause the roduct tmalfunction.
• In regular use, smaamnts of smoke may be emitted from the flash.
This is due to the high intensity of the flash burning dust and foreign materials stuck to the
front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from
the flash to prevent heat build-up and damage to the unit.
• Remove and store the batteries when you are not using the camera.
If the batteries are left inside the camera, damage caused by leakage may occur.
• Before you discard the batteries, cover the terminals with tape or other
insulators.
Contacting other metal materials may lead to fire or explosions.
• Do not charge batteries of different types at the same time, or use older batteries
together with newer batteries.
• Do not insert the batteries with the + and – terminals reversed.
This may cause the product to malfunction.
9
Conventions Used in This Guide
• Do not sit down with the camera in your pocket.
Doing so may cause malfunctions or damage the screen.
• When putting the camera in your bag, ensure that hard objects do not come into
contact with the screen.
• Do not attach any hard objects to the camera.
Doing so may cause malfunctions or damage the screen.
Conventions Used in is Gide
•
•
•
Icons are used in the text tent e camera buttons and switches.
Language that displays on n apears inside [ ] (square brackets).
The directional btons and ET button are represented by the
following icons.
Up button
Left button
FUNC./SET button
Right button
Down button
•
•
•
•
•
•
•
: Things you should be careful about
: Troubleshooting tips
: Hints for getting more out of your camera
: Supplemental information
(p. xx): Reference pages (“xx” stands for a page number)
This guide assumes all functions are at their default settings.
The various types of memory cards that can be used in this camera are
collectively referred to as memory cards in this guide.
10
Getting Started
This chapter explains preparations before shooting, how to shoot in »
mode, and then how to view and erase the images you take. The latter
part of this chapter explains how to shoot aview movies and transfer
images to a computer.
Attaching the Strapg te Camera
•
Attach the includ strap it round your wrist to avoid dropping
the camera ding use.
•
Keep your armtight against your body while holding the camera firmly by
the sides when hooti. Be sure that your fingers do not block the flash.
Strap
11
Compatible Memory Cards (Sold Separately)
The cards below can be used without restrictions on their capacities.
•
•
•
•
•
•
*
SD memory cards*
SDHC memory cards*
SDXC memory cards*
MultiMediaCards
MMCplus memory cards
HC MMCplus memory cards
This memory card complies with the SD standards. Some cards may not operate
properly depending on the brand of card used.
Depending on your computer’s OS version, SDXC memory cards may not
be recognized even when using a commercially available card reader.
Check to make sure that your OS supports SDXC memory cards
beforehand.
Inserting the Batteriend Memory Card
Insert the included batteries aemard (sold separately).
the card’s write-protect tab.
z e memory card has a write-protect tab,
you will not be able to record images if the
tab is in the locked position. Slide the tab
up until you hear a click.
Open the cover.
z Slide the cover ( ) and open it ( ).
Insert the batteries.
z Insert the batteries with (+) and (-) ends
oriented correctly.
12
Inserting the Batteries and Memory Card
Insert the memory card.
z Insert the memory card as shown until it
locks into place with a click.
z Be sure the memory card is oriented
correctly. Inserting the memory card in the
wrong direction could damage the camera.
Label
Close the cover.
z Close the cover ( ), and press downward
as you slide it until it clicks into place ( ).
What if [Memory card locked] apes on the screen?
SD, SDHC and SDXC memory cardwrite-ptect tab. If this tab is in the
locked position, [Memory card lockedpear on e screen and you will not
be able to take or erase im
Removing the MeCard
Push the memory card in until you hear a
click, then slowly release it.
X The memory card will pop up.
Number of Possible Shots
Alkaline Batteries
(Supplied)
NiMH Batteries
(Sold Separately)
Power Source
Number of Shots*
Playback Time
Approx. 300
Approx. 500
Approx. 11 hours
Approx. 12 hours
* The number of shots that can be taken is based on the Camera & Imaging Products
Association (CIPA) measurement standard.
• Under some shooting conditions, the number of shots that can be taken may be less
than mentioned above.
• Depending on the brand of alkaline batteries used, the number of shots that can be
taken may vary widely.
• The values for NiMH batteries are based on fully charged batteries.
13
Inserting the Batteries and Memory Card
Compatible Batteries
AA alkaline batteries and Canon AA NiMH batteries (sold separately) (p. 33).
Can any other batteries be used?
We cannot recommend the use of any other batteries than those listed above
because performance varies widely.
Why use NiMH batteries?
NiMH batteries last much longer than alkaline batteries, especially in cold
weather.
Battery Charge Indicator
When battery charge is low, an icon and message wll appear. If the batteries
are charged, the icon and message will not appear
Display
ummary
Neted. Rey new batteries.
DeplChange the batteries.
“Change the batteries”
Number of Shots per MCar
Memory Card
B
16 GB
Approx. 1471
Approx. 6026
Number of Shots
• The number of shots that can be taken will vary depending on camera settings, the
subject and the memory card used.
Can you check the number of shots that can be taken?
You can check the number of shots that can be taken when the camera is in a
Shooting mode (p. 20).
Number of shots that can be taken
14
Setting the Date and Time
The Date/Time settings screen will appear the first time the camera is turned
on. Since the dates and times recorded into your images are based on these
settings, be sure to set them.
Turn on the camera.
z Press the power button.
X The Date/Time screen will appear.
Set the date and time.
z Press the qr buttons to choose an option.
z Press the op buttons to set a value.
Complete the setting.
z Press the m button.
X Once the date and time have been set, the
Date/Time screen will close.
z Pressing the power button will turn off the
camera.
Reappearing Date/Time screen
Set the correct date and time. If you have not set the date and time, the Date/Time
screen will appear each time you turn on the camera.
Daylight saving time settings
If you choose
the time to daylight saving (1 hour ahead).
in Step 2 and press the op buttons to choose
, you will set
15
Setting the Date and Time
Changing the Date and Time
You can change the current date and time settings.
Display the menu.
z Press the n button.
Choose [Date/Time].
z Press the zoom buttons to choose the 3
tab.
z Press the op bttons to choose
[Date/Time], thepress the m button.
Change the date and time.
z Follow Steps 2 and 3 on p. 15 to adjust the
setting.
z Press the n button to close the menu.
Date/Time battery
If the Date/Time screen appears even when the date/time have been correctly set,
insert a new date/time battery (p. 118).
16
Setting the Display Language
You can change the language that displays on the screen.
Enter Playback mode.
z Press the 1 button.
Display the settings screen.
z Press and hold the m button, then press
the n button.
Set the dispy language.
z Press the qr buttons to choose a
le, thepress the m button.
X Odisplaanguage has been set,
the ttings screen will close.
You can also change the display language by pressing the n button
to choose [Language] from the 3 tab.
17
Formatting Memory Cards
Before you use a new memory card or one that has been formatted in other
devices, you should format the card with this camera.
Formatting (initializing) a memory card erases all data on the memory card.
As you cannot retrieve the erased data, exercise adequate caution before
formatting the memory card.
Display the menu.
z Press the n button.
Choose [Format].
z Press the zoom uttons to choose the 3
tab.
z Press op bons to choose [Format],
then he m utton.
Choose [OK].
z Press the qr buttons to choose [OK], then
press the m button.
Format the memory card.
z Press the op buttons to choose [OK],
then press the m button.
X The memory card will be formatted.
18
Pressing the Shutter Button
Complete formatting.
X When formatting ends, [Memory card
formatting complete] will appear on the
screen.
z Press the m button.
Formatting or erasing data on a memory card merely changes the file
completely erased. Be careful when transferring or disposing of a memory
card. When disposing of a memory card, take precautions such as
physically destroying the card to prevent personal information leaks.
• The total capacity of the memory card displayed in the formatting screen
may be less than indicated on the memorcard.
• Perform a low-level format (p. 110) of e mory card when the camera
does not operate properly, the rding/ring speed of a memory card
has dropped, when continuoing spd slows down, or when
movie recording stops sudde
Pressing the er Button
To take images at are in focus, be sure to first press the shutter button
lightly (halfway) to cus, hen press fully to shoot.
Press halfway (Press lightly to focus).
z Press lightly until the camera beeps twice
and AF frames appear where the camera
focused.
Press fully (Press fully to shoot).
X The camera plays the shutter sound and
takes the shot.
z Since the shot is being taken while the
shutter sound plays, be careful not to move
the camera.
If you shoot without pressing the shutter button halfway, the image may not
be in focus.
19
Taking Pictures (Smart Auto)
Since the camera can determine the subject and shooting conditions, you can
let it automatically select the best settings for the scene and just shoot. The
camera can also detect and focus on faces, setting the color and brightness
to optimal levels.
Turn on the camera.
z Press the power button.
X The start-up screen will appear.
Enter » mode.
z Press the
buttons to choos» and press the m
button.
button, then press the qr
z Whepoint tcamera toward the
subjcamerwill make a slight
ise determines the scene.
icoor the determined scene will
ar in the upper right of the screen.
camera will focus on detected faces
and display frames on them.
Compose the shot.
z Pressing the i (telephoto) zoom button
will zoom in on your subject, making it
appear larger. Pressing the j (wide
angle) zoom button will zoom out from your
subject, making it appear smaller. (The
zoom bar showing the zoom position
appears on the screen.)
Zoom bar
Focus.
z Press the shutter button halfway to focus.
20
Taking Pictures (Smart Auto)
X When the camera focuses, it will beep
twice and AF frames will appear where the
camera focused.
Several AF frames will appear when the
camera focuses on more than one point.
AF Frame
Shoot.
z Press the shutter button fully to shoot.
X The camera will play the shutter sound and
shoot. The flh will automatically fire in
low light ndons.
X Tage wappear on the screen for
aately to seconds.
z Yon take a second picture even while
uttebutton again.
What if..
• What if the color d ightness of the images do not turn out as
expected?
The scene icon (p. 127) that appears on the screen may not match the actual
scene. If this happens, try shooting in G mode (p. 65).
• What if white and gray frames appear when you point the camera toward
a subject?
When faces are detected, a white frame appears on the face of the main
subject, while gray frames appear on other detected faces. The frames will
follow the subjects within a certain range (p. 73).
• What if a flashing
appears?
Attach the camera to a tripod so that the camera does not move and blur the
image.
• What if the camera does not play any sounds?
Pressing the n button while turning on the camera power will turn off all
sounds. To turn the sounds on, press the n button to choose [Mute] from
the 3 tab, then press the qr buttons to choose [Off].
21
Taking Pictures (Smart Auto)
• What if the image comes out dark even if the flash fired when shooting?
The subject is too far away for the flash to reach. The effective flash range is
approximately 30 cm – 3.0 m (12 in. – 9.8 ft.) at maximum wide angle (j), and
approximately 30 cm – 2.0 m (12 in. – 6.6 ft.) at maximum telephoto (i).
• What if the camera beeps once when the shutter button is pressed
halfway?
Your subject may be too close. When the camera is at maximum wide angle
(j), move about 1 cm (0.4 in.) or more away from your subject and shoot.
Move about 25 cm (9.8 in.) or more away when the camera is at maximum
telephoto (i).
• What if the lamp lights when the shutter button is pressed halfway?
To reduce red-eye and to assist in focusing, the lamp may light when shooting
in dark areas.
• What if the screen turns off when you try to sho?
when recharging ends.
What if an icon appearin ther right of the screen?
The icon for the determined scear n the upper right of the screen. For
details on the icons tt apeane Icons” (p. 127).
22
Viewing Images
You can view the images you have taken on the screen.
Enter Playback mode.
z Press the 1 button.
X The last image you took will appear.
Choose an image.
z Pressing the q button will cycle through
the images from newest to oldest.
z Pressing the r button will cycle through
the images from oldest to newest.
z The images ange more quickly if you
keep the r ttons pressed, but they will
acoars
z Twill retct after approximately 1
mielapses.
resng the 1 button again while the
ns is retracted will turn off the power.
Switching Shoting mode
Pressing the shutter button halfway while in Playback mode, or pressing the
button switches the camera to Shooting mode.
23
Erasing Images
You can choose and erase images one at a time. Please note that erased
images cannot be recovered. Exercise adequate caution before erasing an
image.
Enter Playback mode.
z Press the 1 button.
X The last image you took will appear.
Choose an image to erase.
z Press the qr buttons to display an image
to erase.
Erase the image.
z Press the p button.
z Press the qr buttons to choose [Erase],
then press the m button.
X The displayed image will be erased.
z To exit instead of erasing, press the qr
buttons to choose [Cancel], then press the
m button.
24
Shooting Movies
The camera can automatically select all settings so that you can shoot movies
just by pressing the shutter button.
Enter E mode.
z Press the
buttons to choose E, then press the m
button.
button and press the qr
Remaining Time
mpose the shot.
essing the i zoom button will zoom in
n your subject, making it appear larger.
Pressing the j zoom button will zoom out
from your subject, making it appear
smaller.
Focus.
z Press the shutter button halfway to focus.
X When the camera focuses, it will beep
twice.
Shoot.
z Press the shutter button fully.
25
Shooting Movies
X Recording will start, and [ Rec] and the
elapsed time will appear on the screen.
z Once shooting begins, take your finger off
the shutter button.
Elapsed Time
z If you change the composition of your shot
during shooting, the focus will stay the
same, but the brightness and tone will
automatically adjust.
z Do not touch the microphone while
shooting.
z Do not press any buttons other than the
shutter button whle shooting. The sound
the buttons makwill be recorded in the
movie.
Microphone
Stop sng.
ss tshutter button fully again.
ama will beep once and stop
ing the movie.
X The movie will record to the memory card.
X Shooting will automatically stop when the
memory card fills.
Zooming while shooting
Pressing the zoom buttons while shooting will zoom in on or out from the subject.
However, movies shot at zoom factors that appear in blue will be coarse.
Operation sounds will be recorded.
Shooting Time
Memory Card
Shooting Time
4 GB
16 GB
Approx. 32 min. 26 sec.
Approx. 2 hr. 12 min. 50 sec.
• Shooting times are based on default settings.
• Recording will automatically stop when either the clip file size reaches 4 GB or the
recording time reaches approximately 1 hour.
• Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 4 or higher memory cards are recommended.
26
Viewing Movies
You can view the movies you have shot on the screen.
Enter Playback mode.
z Press the 1 button.
X The last image you took will appear.
X
appears on movies.
Choose a movie.
z Press the qr buttons to choose a movie,
then press the m button.
z The movie control panel will appear.
y the movie.
z Press the qr buttons to choose
(Play), then press the m button.
X The movie will play.
z If you press the m button, the movie will
pause and the movie control panel will
appear. Press the qr buttons to choose
(Play), then press the m button to
resume playback.
z Press the op buttons to adjust the
volume.
X After the movie finishes,
appears.
27
Transferring Images to a Computer for Viewing
You can use the included software to transfer images you have shot with the
camera to a computer for viewing. If you are already using software included
with another Canon-brand compact digital camera, install the software from
the included CD-ROM, overwriting your current installation.
System Requirements
Windows
Windows 7
OS
Windows Vista Service Pack 1 and 2
Windows XP Service Pack 3
Computer model
The above OS should be pre-installed on computers with built-in
USB ports.
Pentium 1.3 GHz or higher
CPU
RAM
Windows 7 (64 bit): 2 GB or more
Windows 7 (32 bit), Windows a (bit, 32 bit): 1 GB or more
Windows XP: 512 MB or e
Interface
USB
Free Hard Disk
Space
ZoomBrowser X: 200 more
CameraWiMB more*
Movie UplouTu: 30 MB or more
Pototitchmore
Display
024 x 768 pigher
*
For Windows XP, Misoft .NT Framework 3.0 or later (max. 500 MB) must be
installed. Installation mtake ome time depending on your computer’s capabilities.
Macintosh
Mac OS X (v10.5 – v10.6)
OS
Computer model
The above OS should be pre-installed on computers with built-in
USB ports.
Intel Processor
CPU
RAM
Mac OS X v10.6: 1 GB or more
Mac OS X v10.5: 512 MB or more (still images)
Interface
USB
Free Hard Disk
Space
ImageBrowser: 250 MB or more
CameraWindow: 150 MB or more
Movie Uploader for YouTube: 30 MB or more
PhotoStitch: 50 MB or more
Display
1,024 x 768 pixels or higher
28
Transferring Images to a Computer for Viewing
Preparations
Windows Vista and Mac OS X (v10.5) are used for these explanations.
Install the Software.
Windows
Place the CD in the computer’s CD-
ROM drive.
z Place the supplied CD-ROM (DIGITAL
CAMERA Solution Disk) (p. 2) into the
computer’s CD-ROM drive.
Begin installation.
z Click [Easy Itallation] and follow the
on-screen uctions to proceed with the
iion.
z If er Accnt Control] window
aps, follow the on-screen instructions
o prceed.
n the installation finishes, click
estart] or [Finish].
Remove the CD-ROM.
z Remove the CD-ROM when your desktop
screen appears.
Macintosh
Place the CD in the computer’s CD-
ROM drive.
z Place the supplied CD-ROM (DIGITAL
CAMERA Solution Disk) (p. 2) into the
computer’s CD-ROM drive.
Begin installation.
z Double-click the
on the CD.
z Click [Install], and follow the on-screen
instructions to proceed with the
installation.
29
Transferring Images to a Computer for Viewing
Connect the camera to the
computer.
z Turn off the camera.
z Open the cover and insert the included
interface cable’s smaller plug (p. 2) firmly
into the camera terminal in the direction
shown.
z Insert the interface cable’s larger plug into
the computer. For connection details, refer
to the user guide provided with the
computer.
Turn on the caera.
z Press the 1 tn to turn on the camera.
Open raWidow.
W
[Downloads Images From Canon
era using Canon CameraWindow].
X CameraWindow will appear.
z If CameraWindow does not appear, click
the [Start] menu and choose [All
Programs], followed by [Canon Utilities],
[CameraWindow] and [CameraWindow].
Macintosh
X CameraWindow will appear when you
establish a connection between the
camera and computer.
z If CameraWindow does not appear, click
the CameraWindow icon on the Dock (the
bar which appears at the bottom of the
desktop).
30
Transferring Images to a Computer for Viewing
For Windows 7, use the following steps to display CameraWindow.
Click
on the task bar.
In the screen that appears, click the
link to modify the program.
Choose [Downloads Images From Canon Camera using Canon
CameraWindow] and click [OK].
Double click
.
Transfer and View Images
z Click [Import Images from Camera], and
then click [Import Untransferred Images].
X All images not previously transferred will
transfer to thcomputer. Transferred
images will bsorted by date and saved in
separate fos in the Pictures folder.
z ameraindow when image
tris compte.
Turff the camera and unplug the cable.
or dails on how to view images using a
mputer, refer to the Software Guide.
You can trsfer imges even without using the image transfer function in
the included ftwaby simply connecting your camera to a computer.
There are, however, the following limitations.
• It may take a few minutes from when you connect the camera to the
computer until you can transfer images.
• Images shot in the vertical orientation may be transferred in the horizontal
orientation.
• Protection settings for images may be lost when transferred to a
computer.
• There may be problems transferring images or image information
correctly depending on the version of the operating system in use, the file
size, or the software in use.
• Some functions in the included software may not be available, such as
editing movies, and transferring images to the camera.
31
Separately Sold Accessories
The following camera accessories are sold separately. Some accessories are
not sold in some regions, or may no longer be available.
Power Supplies
AC Adapter Kit ACK800
z This kit lets you power the camera using
household power. Recommended for
powering the camera for an extended
period of time or when connecting to a
computer or printer. Cannot be used to
charge the camera batteries. DC Coupler
DR-DC10 is required to connect the AC
adapter kit to he camera.
DC CouplDRDC10
z For se wite AC adapter kit.
ery nd Charger Kit CBK4-300
his dedicated battery charger kit includes
both Battery Charger CB-5AH and four
NB-3AH rechargeable AA NiMH (nickel
metal hydride) batteries. Recommended
for powering the camera for an extended
period of time.
You can also purchase NiMH Battery NB4-300, a set of four rechargeable
AA NiMH batteries separately.
Battery and Charger Kit CBK4-200 can also be used.
Using Accessories Abroad
The battery charger and the AC adapter kit can be used in regions that have 100 –
240 V (50/60 Hz) AC power.
If the plug does not fit the outlet, use a commercially available plug adapter. Do
not use electrical transformers for foreign travel as they will cause damage.
33
Separately Sold Accessories
Flash
High-Power Flash HF-DC1
z This externally mounted flash can be used
to capture photographic subjects that are
too distant for the built-in flash to
illuminate.
Other Accessories
Printers
AV Cable AVC-DC300
z Use this cable to connect to a TV for
shooting and viewing images.
Canon-PictBrige Compliant
rs
nnting your camera to a Canon-
PictBridge compliant printer, you
print your images without having to
use a computer.
For more information, visit your nearest
Canon retailer.
SELPHY series
PIXMA series
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with genuine
Canon accessories. Canon shall not be liable for any damage to this product and/or
accidents such as fire, etc., caused by the malfunction of non-genuine Canon
accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this
warranty does not apply to repairs arising out of the malfunction of non-genuine Canon
accessories, although you may request such repairs on a chargeable basis.
34
Components Guide
Lamp (pp. 52, 53, 54, 62, 113, 114)
Microphone (p. 26)
Lens
sh (pp. , 67)
ker
od Socket
Shutter Button (p. 19)
Power Button (p. 15)
emory Card / Battery Cover (p. 12)
DCoupler Cable Port (p. 119)
(Mode) Buttn
Use the
button to hangthe Shooting mode.
Movie Mode
Auto Mode
For shooting movies
(pp. 25, 81).
You can leave it to the camera to
select settings for fully automatic
shooting (p. 20).
G Mode
Special Scene
Mode
Choose settings
yourself to take
various types of
pictures (p. 66).
You can shoot with
the best settings for
the scene or add
effects and shoot
(p. 57)
36
Components Guide
Screen (LCD Monitor)
(pp. 38, 126, 128)
A/V OUT (Audio/Video Output) Terminal
(p. 91
Zoom Button
Shooting: i (Telephoto) /
j (Wide Angle) (pp. 20, 25, 49)
Playback: k (Magnify) (p. 90) /
g (Index) (p. 86)
n utton (p. 41)
b (Expure Compensation) (p. 67) /
d (Jumpp. 87) / o Button
e (Macro) (p. 72) / q Button
m FUNC./SET Button (p. 40)
h (Flash) (pp. 48, 67, 78) / r Button
Q (Self-Timer) (pp. 52, 53, 54) /
a (Single Image Erase) (p. 24) /
p Button
Indicator (p. 39)
Strap Mount ( p. 11)
1 (Playback) utton (pp. 2
DIGITAL Termal (pp. 30, 98)
37
Screen Display
Switching the Display
Shooting
You can change the screen display by pressing the n button, then
choosing [Shooting Info] from the 4 tab. Refer to pp. 126 for details on
information that appears on the screen.
[On]
[Off]
Information Display
No Infoation Display
Playback
You can change the screen display by g the n button, then
choosing [Info Display] from thtab. r to pp. 128 for details on
information that appears on t.
[Off]
No Information
Display
[Standard]
Simple Information DetailedInformation
Display Display
[Detailed]
[Focus Check]
Focus Check
Display (p. 89)
38
Indicator
Screen Display in Dark Shooting Conditions
The display automatically brightens when shooting in dark conditions,
allowing you to check the composition (Night Display function). However, the
recorded may be different. Screen noise may appear and the movement of
the subject may appear somewhat jagged on the screen. This has no effect
on the recorded image.
Overexposure Warning during Playback
In Detailed Information Display (p. 38), overexposed areas of the image flash
on the screen.
Histogram during Playback
z The graph thappears in Detailed
InformatiDplay (p. 128) is called the
hiam. Thistogram shows the
don of bhtness in an image
hotally, and the amount of brightness
ertilly. When the graph approaches the
ht sde, the image is bright, but when it
pproaches the left side, the image is dark,
and in this way you can judge the
exposure.
High
Low
Dark
Bright
Indicator
The indicator on the back of the camera (p. 37) will light or blink depending
on the camera’s status.
Colors
Status
Lights
Blinks
Operation Status
When connected to a computer (p. 30), display off (p. 113)
Green
During camera start-up, recording/reading/transmitting
image data, when shooting long exposures (p. 63)
When the indicator blinks green, do not turn off the power, open the
memory card slot/battery cover, shake or jolt the camera. These actions
may corrupt the image data or cause the camera or memory card to
malfunction.
39
FUNC. Menu – Basic Operations
You can set commonly used shooting functions using the FUNC. menu.
The menu items and options differ depending on the Shooting mode (pp. 130
– 133).
Display the FUNC. menu.
z Press the m button.
Choose a menu item.
z Press the op buttons to choose a menu
item.
X The available opons for the menu item
appear in thlowr part of the screen.
Choooptin.
z Press r buttons to choose an option.
Available Options
caalso choose settings by pressing
Menu Items
n button on options that display
Complete the setting.
z Press the m button.
X The shooting screen will reappear and the
setting you chose will display on the
screen.
40
MENU – Basic Operations
Various functions can be set from the menus. The menu items are organized
under tabs, such as for shooting (4) and playback (1). The options differ
depending on the Shooting mode and the Playback mode (pp. 134 – 136).
Display the menu.
z Press the n button.
Choose a tab.
z Press the zoom buttons or the qr buttons
to choose a tab.
Choose an im.
z Prhe obuttons to choose an item.
z ms reqre you to press the m or
r n to display a submenu in which
ou hange the setting.
Choose an option.
z Press the qr buttons to choose an option.
Complete the setting.
z Press the n button to restore the
normal screen.
41
Changing the Sound Settings
You can silence or adjust the volume of camera sounds.
Muting Sounds
Display the menu.
z Press the n button.
Choose [Mute].
z Press the zoom buttons to choose the 3
tab.
z Press the op bttons to choose [Mute],
then press the qbuttons to choose [On].
z Press the n utton to restore the
noren.
• You can also ute caera sounds by holding down the n button
and turning on the ower.
• If you mute camera sounds, the sound will also be muted when playing
back movies (p. 27). If you press the o button while playing back a
movie, the sound will play back, and you can adjust the volume with the
op buttons.
42
Changing the Sound Settings
Adjusting the Volume
Display the menu.
z Press the n button.
Choose [Volume].
z Press the zoom buttons to choose the 3
tab.
z Press the op buttons to choose
[Volume], then press the m button.
ange the volume.
z Press the op buttons to choose an item,
then press the qr buttons to adjust the
volume.
z Press the n button twice to restore
the normal screen.
43
Returning the Camera to Default Settings
When you have mistakenly changed a setting, you can reset the camera to
the default settings.
Display the menu.
z Press the n button.
Choose [Reset All].
z Press the zoom buttons to choose the 3
tab.
z Press the op buttons to choose [Reset
All], then press te m button.
Reset the settings.
z Press the qr buttons to choose [OK], then
press the m button.
settings.
Are there functions that cannot be reset?
• The [Date/Time] (p. 16), [Language] (p. 17) and [Video System] (p. 91) in the 3
tab.
• The recorded custom white balance data (p. 68).
• The Shooting mode (p. 36)
44
Power Saving Function (Auto Power Down)
To save battery power, the screen turns off, and the camera shuts down
automatically when it is not operated for a certain time.
Power Saving during Shooting
The screen will turn off approximately 1 minute after you stop operating the
camera. After about 2 more minutes, the lens will retract and the power will
turn off. When the screen has turned off but the lens has not yet retracted,
can continue.
Power Saving during Playback
The power will turn off approximately 5 minutes after you stop operating the
camera.
• You can turn off the power saving functiop. 112).
• You can adjust the time before the scrn rns off (p. 113).
45
46
Turning the Flash Off
You can shoot with the flash turned off.
Press the r button.
Choose !.
z Press the qr buttons to choose !, then
press the m button.
X Once set, ! will appear on the screen.
z To turn the flash back on, follow the steps
above to choose
.
What if a flhing
ars?
When you press the shtter bton halfway in low light conditions where camera
shake is likely, a flashing will appear on the screen. Attach the camera to a
tripod to prevent it from moving.
48
Zooming in More Closely on Subjects
(Digital Zoom)
You can use the digital zoom to zoom up to approximately 13x maximum, and
capture subjects that are too far away for the optical zoom to enlarge.
However, depending on the recording pixel setting (p. 55) and zoom factor,
the images may appear coarse (the zoom factor will appear in blue).
Press the i zoom button.
z Hold the button until zooming stops.
X Zooming stops at the largest possible
zoom factor without image deterioration.
The zoom factor will appear on the screen
when you release the zoom button.
Zoom Factor
Press thi zoom button again.
X Tital zom will zoom in even further
oubject.
Turning off tdigital zoom
To turn off the digital zoom, press the n button to choose [Digital Zoom] from
the 4 tab, then choose [Off].
The focal length when using the optical zoom and digital zoom together is
approximately 37 – 488 mm, and 37 – 122 mm when using the optical
zoom alone (all focal lengths are 35mm film equivalent).
49
Zooming in More Closely on Subjects (Digital Zoom)
Digital Tele-Converter
The focal length of the lens can be increased by approximately 1.4x or
approximately 2.3x. This enables a faster shutter speed and less chance of
camera shake than the zoom (including digital zoom) used by itself at the
same zoom factor.
However, a recording pixel setting (p. 55) of
or
will cause images to
appear coarse (the zoom factor will appear in blue).
Display the menu.
z Press the n button.
Choose [DitaZoom].
z Presoom btons to choose the 4
tab.
ess op buttons to choose [Digital
m].
e the setting.
z Press the qr buttons to choose a
magnification.
z Press the n button to complete the
setting and restore the shooting screen.
X The view will be enlarged and the zoom
factor will appear on the screen.
z To return to standard digital zoom, choose
[Digital Zoom] and the [Standard] option.
• The respective focal lengths when using [1.4x] and [2.3x] are
approximately 51.8 – 171 mm and approximately 85.1 – 281 mm (35mm
film equivalent).
• The digital tele-converter cannot be used together with the digital zoom.
• The shutter speeds may be the same when at maximum telephoto (i),
and when zoomed in on the subject using Step 2 on p. 49.
50
Inserting the Date and Time
You can insert the shooting date and time in the lower right corner of an
image. Once inserted, however, they cannot be deleted. Be sure to check
beforehand that the date and time are correctly set (p. 15).
Display the menu.
z Press the n button.
Choose [Date Stamp].
z Press the zoom buttons to choose the 4
tab.
z Press the obuttons to choose [Date
Stamp].
Chthe sting.
z Prhe qr buttons to choose [Date] or
Dat& Time].
ess he n button to complete the
tting and restore the shooting screen.
X Once set, [DATE] will appear on the
screen.
Shoot.
X The shooting date or time will be recorded
in the image’s lower right corner.
z To restore to the original setting, choose
[Off] in Step 3.
51
Using the Self-Timer
embedded date and time as follows. However, if you do this for images with
an embedded date and time, the date and time may be printed twice.
• Use the DPOF print settings (p. 105) to print.
• Use the included software to print.
Refer to the Software Guide for details.
• Print using printer functions (p. 107).
Using the Self-Timer
The self-timer can be used to shoot a group photo that includes the
photographer. The camera will shoot approximately 10 seconds after the
shutter button is pressed.
Press p buon.
Cse Ò.
z Press the op buttons to choose Ò, then
press the m button.
X Once set, Ò will appear on the screen.
52
Using the Self-Timer
Shoot.
z Press the shutter button halfway to focus
on the subject, then press it fully.
X When the self-timer starts, the lamp blinks
and the self-timer sound plays.
X Two seconds before the shutter releases,
remains lit when the flash will fire).
the countdown has started, press the p
button.
z To restore the original setting, choose
in Step 2 on 52.
You can change the delay and er of ss (p. 54).
Using the Self-Tio Pevent Camera Shake
The camera will soappy 2 seconds after the shutter button is
pressed, prevenng any cake that occurs when pressing the shutter
button.
Choose Î.
z Follow Step 2 on p. 52 to choose Î.
X Once set, Î will appear on the screen.
z Follow Step 3 above to shoot.
53
Using the Self-Timer
Customizing the Self-Timer
You can set the delay (0 – 30 seconds) and the number of shots (1 – 10
shots).
Choose $.
z Follow Step 2 on p. 52 to choose $, then
press the n button immediately.
Choose the settings.
z Press the op btons to choose [Delay]
or [Shots].
z Prer butns to choose a value,
then he m btton.
ce s$ will appear on the screen.
w Sp 3 on p. 53 to shoot.
What if the umber of is set to two or more shots?
• Exposure and white lancsettings are set with the first shot.
• If the flash fires or you set a high number of shots, the shooting interval may take
longer than usual.
• If the memory card fills, shooting stops automatically.
When you set the delay for more than 2 seconds, the lamp and self-timer
sound speed up 2 seconds before the shutter releases (the lamp remains
lit when the flash will fire).
54
Changing the Recording Pixel Setting
(Image Size)
You can choose from 5 recording pixel settings.
Choose the recording pixel setting.
z After pressing the m button, press the
op buttons to choose
.
Choose an option.
z Press the qr buttons to choose an option,
then press the m button.
z To restore the original setting, choose
in Steps 1 –
If you choose
, you cannot digital zm (p. 49) or digital tele-
converter (p. 50).
Changing the Cpression Ratio
(Image Qualiy)
You can choose from the following 2 compression ratios (image quality):
(Fine),
(Normal).
Choose the compression ratio.
z After pressing the m button, press the
op buttons to choose
.
Choose an option.
z Press the qr buttons to choose an option,
then press the m button.
X The setting will appear on the screen.
z To restore the original setting, choose
in Steps 1 – 2.
55
Changing the Compression Ratio (Image Quality)
Approximate Values for Recording Pixels and Compression Ratio
Number of Shots per
Memory Card
(Approx. shots)
Compression Single Image Data
Recording Pixels
Ratio
Size (Approx. KB)
4 GB
1471
3017
2320
4641
6352
12069
20116
30174
1978
4022
16 GB
2565
1226
1620
780
558
278
150
84
6026
12354
9503
(Large)
10M/3648x2736
(Medium 1)
6M/2816x2112
19007
26010
49420
82367
123550
8101
(Medium 2)
2M/1600x1200
(Small)
0.3M/640x480
(Widescreen)
3648x2048
16473
• The values in the table are meaordio Canon standards and may change
depending on the subject, memd caera settings.
Approximate Vues for Size
z
For sending images as e-mail
attachments.
A2 (16.5 x 23.4 in.)
A3 – A5 (11.7 x
16.5 – 5.8 x 8.3 in.)
z
For displaying on wide-screen HD TVs
with an aspect ratio of 16:9.
5 x 7 in.
Postcard size
3.5 x 5 in.
56
Shooting in Various Conditions
The camera will select the necessary settings for the conditions in which you
wish to shoot when you choose the matching mode.
Choose a Shooting mode.
z After pressing the
button, press the
qr buttons to choose K.
z Press the op buttons to choose a
Shooting mode, then press the m button.
Shoo
shos with reduced blur
Reduction)
z Lets you shoot with reduced camera shake
and subject blur.
I Take portraits (Portrait)
z Produces a soft effect when
photographing people.
V Take shots of kids and pets
(Kids&Pets)
z Lets you capture subjects that move
around, such as children and pets, without
missing photo opportunities.
z Move approximately 1 m (3.3 ft.) or more
away from your subject and shoot.
58
Shooting in Various Conditions
Take shots in low light conditions
(Low Light)
z Lets you take shots in dark places with
reduced camera shake and subject blur.
w Take shots of people at the beach
(Beach)
z Lets you take shots of brightly lit people on
sandy beaches where the reflected
sunlight is strong.
OTake shofoliage (Foliage)
z shoorees and leaves, such as
nwth, autmn leaves or blossoms,
in vd colors.
P Take shots of people in snow
(Snow)
z Lets you take bright, natural-colored shots
of people against snowy backgrounds.
UShoot sunsets (Sunset)
z Lets you take shots of sunsets in vivid
colors.
59
Shooting in Various Conditions
t Take shots of fireworks
(Fireworks)
z Lets you take shots of fireworks in vivid
colors.
In t mode, attach the camera to a tripod to prevent the camera from
moving and blurring the image.
• In
and
modes, the recording pixel setting will be fixed at
(1600 x 1200 pixels).
• In V mode, images may appear coarse because the ISO speed (p. 69)
is increased to match the shooting conditions
60
Adding Effects and Shooting
You can add various effects to images when shooting.
Choose a Shooting mode.
z Follow Step 1 on p. 58 to choose a
Shooting mode.
Shoot.
Shoot images with vivid colors
(Super Vivid)
z Lets you take shots with vivid, intense
colors.
Tasterizd shots
(PoEffect)
ets ou take shots that look like an old
ster or illustration.
Since you may achieve the expected results with images shot in
and
modes, try taking some test shots first.
61
Using the Face Self-Timer
The shutter will release approximately two seconds after the camera detects
a new face (p. 73). You can use this when the photographer wants to be in
the image, such as a group photo.
Choose
.
z Follow Step 1 on p. 58 to choose
.
Compose the shot and press the
shutter button halfway.
z Make sure a green frame appears on the
face focused on and white frames appear
on other faces.
Press the shutr button fully.
X The caera wilter shooting stand-by,
and raight camera to start count
downppear on the screen.
lamwill blink and the self-timer
d wiplay.
he subjects and look at the
camera.
X When the camera detects a new face, the
lamp and self-timer sound will speed up
(the lamp remains lit when the flash will
fire), and two seconds later the shutter will
release.
z To cancel shooting with the timer after
countdown has started, press the p
button.
Changing the number of shots
In Step 1, press and hold the n button for a moment, then press the qr
buttons to change the number of shots. Press the n button to complete the
setting.
Even if your face is not detected after joining the subjects, the shutter will
release approximately 15 seconds later.
62
Shooting Long Exposures
You can set the shutter speed to a range between 1 and 15 seconds to shoot
long exposures. However, you should attach the camera to a tripod to prevent
the camera from moving and blurring the image.
Choose ≈.
z Follow Step 1 on p. 58 to choose ≈.
Choose the shutter speed.
z Press the o utton.
z Press thqr uttons to choose the
shspeehen press the m button.
Conthe exosure.
Wheyou press the shutter button
lfwa, the exposure for the chosen
utter speed will appear on the screen.
• The brighess of e image may differ from the brightness of the screen
in Step 3 whtshutter button was pressed halfway.
• When shutter speeds of 1.3 seconds or slower are used, images are
processed to eliminate noise after being taken. A certain amount of
processing time may be needed before you can take the next shot.
If the flash fires, the image may be overexposed. If this happens, set the
flash to ! and shoot.
63
64
Choosing Settings Yourself
In this chapter you will learn how to use the various functions in G
mode to progressively advance your shootg skills.
•
This chapter assumes that you sen G mode by pressing the
button, then the qr butto.
•
•
G stands for Program
Before attemptinto sha fuction explained in this chapter in
modes other tan G modif the function is available in those modes
(pp. 130 – 13.
65
Shooting in Program AE
You can choose the settings for various functions to suit your preferences.
AE stands for Auto Exposure.
The focusing range is approximately 5 cm (2.0 in.) – infinity at maximum wide
angle (j), and approximately 25 cm (9.8 in.) – infinity at maximum telephoto
(i).
Enter G mode.
z After pressing the
button, press the
qr buttons to choose G, then press the
m button.
Adjust the settings according to
your purposes pp. 67 – 79).
Shoot.
What if the shutter speed and ae value appear in orange?
If a correct exposure cannot bwhpressing the shutter button
halfway, the shutter seand lue appear in orange. Try the following
settings to obtain thcorrect exp
• Turn on the flash (67)
• Choose a higher ISO peed p. 69)
66
Adjusting the Brightness
(Exposure Compensation)
You can adjust the standard exposure set by the camera in 1/3-stop
increments in the range of -2 to +2.
Enter Exposure Compensation
mode.
z Press the o button.
Adjust the brightness.
z While watching the screen, press the qr
buttons to adjust the brightness, then
press the m button.
X The exposurcompensation amount will
appear on creen.
Turning the Flh O
You can make the sh fime yu shoot.
The effective flah range is mately 30 cm – 3.0 m (12 in. – 9.8 ft.) at
maximum wide agle (j), and approximately 30 cm – 2.0 m (12 in. – 6.6 ft.)
at maximum telepoto (i).
Choose h.
z After pressing the r button, press the qr
buttons to choose h, then press the m
button.
X Once set, h will appear on the screen.
67
Adjusting the White Balance
The white balance (WB) function sets the optimal white balance for natural
looking colors to match the shooting conditions.
Choose the white balance function.
z After pressing the m button, press the
op buttons to choose
.
Choose an option.
z Press the qr buttons to choose an option,
then press the m button.
X The setting will appear on the screen.
Automatically sets the optimal white balance for the shooting
conditions.
Auto
Day Light
Cloudy
For shooting outdoors, in fine whconditions.
For shooting in cloudor twiligconditions.
For shooting under tunnd bulb-tye (3-wavelength)
fluorescent
Tungsten
For shootinm-wte fluorescent, cool-white fluorescent
ad wm-w-wavelength) fluorescent lighting.
Fluorescent
r shooting uylight fluorescent and daylight-type (3-
wvelengtfluorescent lighting.
Fluorescent H
Custom
For anuy setting a custom white balance.
Custom White Balance
You can adjust the white balance to match the light source at the shooting
location. Make sure that you set the white balance under the light source of
the actual scene you will shoot.
z In Step 2 above, choose
.
z Make sure the entire screen is filled with a
plain, white colored subject, then press the
n button.
X The tint on the screen will change when
white balance data is set.
If you change camera settings after recording white balance data, the tone
may not turn out properly.
68
Changing the ISO Speed
Choose the ISO speed.
z After pressing the m button, press the
op buttons to choose
.
Choose an option.
z Press the qr buttons to choose an option,
then press the m button.
X The setting will appear on the screen.
Automatically adjusts the ISO speed to the Shooting mode and shooting
conditions.
For shooting outdoors, in fine weather conditions.
For shooting in cloudy, or twiht conditions.
For shooting nightscaper dark interiors.
Low
High
Changing the ISO speed
• Lowering the ISO speed shaer images, but there may be an
increased chance of imain ctain shooting conditions.
• Raising the ISO speed resster shutter speed, reducing image blurring
and letting the ash reach grdistances to the subject. The images,
however, will apear coase.
69
Continuous Shooting
You can shoot continuously at a maximum speed of approximately
0.8 images/second while the shutter button is pressed fully and held.
Choose a Drive mode.
z After pressing the m button, press the
op buttons to choose
.
Choose an option.
z Press the qr buttons to choose W, then
press the m button.
z Once set, W will appear on the screen.
Shoot.
X As long as u hd the shutter button
down, te camwill shoot successive
ima
• Cannot be used with thmer . 52, 53, 54).
• Continuous shooting sasein (p. 58) or
mode (p. 59).
• For continuos shotins and exposure are locked when the
shutter buttis pressed .
• Depending othe shoting conditions and the camera settings, the
camera may stshoing momentarily, or the shooting speed may slow
down.
• As the number of images increases, the shooting speed may slow down.
• If the flash fires, the shooting speed may slow down.
70
Changing the Tone of an Image (My Colors)
You can change the tone of an image, for example to sepia or black and
white, when shooting.
Choose My Colors.
z After pressing the m button, press the
op buttons to choose
.
Choose an option.
z Press the qr buttons to choose an option,
then press the m button.
X The setting will appear on the screen.
My Colors Off
Vivid
—
Emphasizes the contrast nd color saturation for a vivid
impression.
Tones downtrast d color saturation for neutral
hues.
Neutral
Sepia
B/W
the ge to sepia tones.
e ime to black and white.
Yust contrast, sharpness, and color saturation
etc. r preference.
Custom Co
The white bance nnot be set in
and
(p. 68).
Custom Color
The contrast, sharpness, and color saturation in an image can be chosen and
set at 5 different levels.
z Follow Step 2 above to choose
, then
press the n button.
z Press the op buttons to choose an
option, then press the qr buttons to
choose a value.
z The more to the right, the stronger/deeper
the effect gets, the more to the left, the
weaker/lighter the effect gets.
z Press the n button to complete the
setting.
71
Shooting Close-ups (Macro)
You can shoot an object at a close distance or even shoot extreme close-ups
of it. The focusing range is approximately 1 – 50 cm (0.4 in. – 1.6 ft.) from the
end of the lens at maximum wide angle (j).
Choose e.
z After pressing the q button, press the qr
buttons to choose e, then press the m
button.
X Once set, e will appear on the screen.
The edges of the image may darken if the flash fires.
How can I take better close-ups?
Try attaching the camera to a tripod and n Î to event the camera from
moving and blurring the image (p).
Shooting Far Aubjects (Infinity)
When it is difficult to ocus because your shot contains subjects that are both
near and far, you can anghe focusing range to focus more reliably on far
away subjects (approx. 3 m (9.8 ft.) or more from the camera) only.
Choose u.
z After pressing the q button, press the qr
buttons to choose u, then press the m
button.
X Once set, u will appear on the screen.
72
Changing the AF Frame Mode
You can change the AF (Auto Focus) frame mode to match the scene you
want to shoot.
Choose [AF Frame].
z Press the n button to choose [AF
Frame] from the 4 tab, then press the qr
buttons to choose an option.
Face AiAF
•
Detects people’s faces and sets the focus, exposure (evaluative metering
only) and white balance (
only).
•
When the camera is pointed at subjects, a frame appears on the face
the camera judges to be the mact, angray frames (max. 2) will
appear on other faces.
•
•
A frame will follow a mobjecithin a certain range.
When the shutter buttoed hlfway, up to 9 green frames will
appear on facs that the ocuses on.
• If a face not deteted, or only gray frames (no white frame) appear, up
to 5 green mes ill appear on the areas the camera focuses on when
the shutter button is pressed halfway.
• Examples of faces that cannot be detected:
- Subjects that are far away or extremely close
- Subjects that are dark or light
- Faces turned to the side or at an angle, or faces with a portion hidden
• The camera may mistakenly identify non-human subjects as a face.
• If the camera cannot focus when you press the shutter button halfway,
the AF frame will not appear.
73
Changing the AF Frame Mode
Center
The AF frame is locked to the center. This is effective for focusing on a
specific point.
You can reduce the AF frame size
• Press the n button to choose [AF Frame Size] from the 4 tab, then
choose [Small].
• The AF frame is set to [Normal] when using the digital zoom (p. 49) or digital
tele-converter (p. 50).
If the camera cannot focus when you press the shutter button halfway, the
AF frame will turn yellow and
will appear.
Changing the Composition with the Fous Lock
While you keep the shutter button pressed halayhe focus and exposure
are locked. You can now recompose anoot. Tis called Focus Lock.
us.
er tsubject you want in focus, and
the shutter button halfway.
firm that the AF frame on the subject is
green.
Recompose.
z Keep the shutter button pressed halfway
and move the camera to recompose the
scene.
Shoot.
z Press the shutter button fully.
74
Magnifying the Focal Point
If you press the shutter button halfway, the AF frame will magnify and you can
check the focus.
Choose [AF-Point Zoom].
z Press the n button to choose [AF-
Point Zoom] from the 4 tab, then press
the qr buttons to choose [On].
Check the focus.
z Press the shutter button halfway.
X In [Face AiAFp. 73), the face detected as
the main bct will appear magnified.
X In ter] (p4), the contents of the
cF framwill appear magnified.
The display will t appear mn [Face AiAF] if a face cannot be detected
or is too big in reion to the scren. In [Center], it will not appear magnified if the
camera cannot fos.
The magnified display will not appear when using the digital zoom (p. 49),
digital tele-converter (p. 50) or when using a TV as a display (p. 79).
75
Shooting with the AF Lock
The focus can be locked. After locking the focus, the focal distance will not
change even when you release your finger from the shutter button.
Lock the focus.
z Keep the shutter button pressed halfway
and press the q button.
X The focus locks and % appears on the
screen.
z If you release your finger from the shutter
button and press the q button again, %
will disappear and the focus will unlock.
Compose the scene and shoot.
Changing the MeteriMethod
You can change the metering (brhtness measuring function) to
match the shooting condition
Choose the metering method.
z After pressing the m button, press the
op buttons to choose
.
Choose an option.
z Press the qr buttons to choose an option,
then press the m button.
X The setting will appear on the screen.
For standard shooting conditions, including back lit shots.
Automatically adjusts the exposure to match the shooting
conditions.
Evaluative
Center
Averages the light metered from the entire frame, but gives greater
Weighted Avg. weight to the center.
Only meters within the
Spot
(Spot AE Point frame) that appears at
the center of the screen.
76
Shooting with the AE Lock
You can lock the exposure and shoot, or set the focus and exposure
separately to shoot. AE stands for “Auto Exposure”.
Choose ! (p. 48).
Lock the exposure.
z Point the camera toward the subject and
press the o button while pressing the
shutter button halfway.
X When & appears, the exposure will be
locked.
z If you release your finger from the shutter
button and pss the o button again, &
will disapand AE will unlock.
Coe the cene and shoot.
Shooting with FE Lock
Just as with the Alock, yu can lock the exposure for shooting with the flash.
FE stands for “FlaExpsure”.
Choose h (p. 67).
Lock the flash exposure.
z Point the camera toward the subject and
press the o button while pressing the
shutter button halfway.
X The flash will fire and when ( appears,
the flash output will be retained.
z If you release your finger from the shutter
button and press the o button again, (
will disappear and FE will unlock.
Compose the scene and shoot.
77
Shooting with Slow Synchro
You can make the main subject, such as people, appear bright by having the
camera provide the appropriate illumination with the flash. At the same time,
you can use a slow shutter speed to brighten the background that the light
from the flash cannot reach.
Choose ….
z After pressing the r button, press the qr
buttons to choose …, then press the m
button.
X Once set, … will appear on the screen.
Shoot.
z Even if the flash es, ensure that the main
subject doenot ove until the shutter
sound ds.
Attach the camera to a tripod to pre camefrom moving and
blurring the image.
78
Red-Eye Correction
You can automatically correct red-eye that occurs in images taken with the
flash.
Choose [Flash Settings].
z Press the n button to choose [Flash
Settings] from the 4 tab, then press the
m button.
Choose the setting.
z Press the op buttons to choose [Red-
Eye Corr.], thn press the qr buttons to
choose [].
Red-eye correction plieo areas other than red eyes. For
example, wed ms ben used around eyes.
• You can lso correct reed images (p. 96).
• You can ao dispy the screen in Step 2 by pressing the r button, then
the n b
Shooting Using a TV as the Display
You can use a TV to display the camera screen content while shooting.
•
•
To connect the camera to a TV, follow the Steps in “Viewing Images on a
TV” (p. 91).
Shooting procedures are the same as when using the camera screen.
79
80
Using Various Functions for
Shooting Movies
This chapter serves as a more advanced vrsion of the “Shooting
Movies” and “Viewing Movies” sections in apter 1, and explains how
to use various functions for shond vieng movies.
•
This chapter asues tbeen chosen by pressing the
then the qr ttons.
button,
81
Changing the Image Quality
You can choose among 3 different image quality settings.
Choose the image quality setting.
z After pressing the m button, press the
op buttons to choose
.
Choose an option.
z Press the qr buttons to choose an option,
then press the m button.
X The option you set will appear on the
screen.
Image Quality and Shooting Time per Memory Card
Recording
Pixels, Frame
Rate
emory Card Capacity
Image
Quality
Content
GB
16 GB
The ie qua
be en
Approx.
2 hr. 12 min.
50 sec.
640 x 480 pixels,
30 frames/sec
Approx.
32 min. 26 sec.
co
, ut
the me will
be sh
Thimage quality will
aear coarse when
Approx.
1 hr. 2 min.
51 sec.
Approx.
4 hr. 17 min.
23 sec.
640 x 480 pixels, compared with
30 frames/sec. LP you can record
, but
approximately twice
the length.
Since the file size is
small, shooting time
will increase, but the
image quality will
decrease.
Approx.
1 hr. 31 min.
25 sec.
Approx.
6 hr. 14 min.
23 sec.
320 x 240 pixels,
30 frames/sec.
• Based on Canon’s testing standards.
• Recording will automatically stop when the clip file size reaches 4 GB, or when the
recording time reaches approximately 1 hour.
• Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 4 or higher memory cards are recommended.
82
AE Lock/Exposure Shift
You can lock the exposure or change it in 1/3 steps within a range of ±2
before shooting.
Focus.
z Press the shutter button halfway to focus.
Lock the exposure.
z After releasing the shutter button, press
the o button to lock the exposure. The
exposure shift bar appears.
z Press the o button again to release the
lock.
Change the xposure.
z While watcthe screen, press the qr
o adjuthe exposure.
ho
83
Other Shooting Functions
• Zooming in More Closely On Subjects
before shooting.
• Using the Self-Timer (p. 52)
• Using the Self-Timer to Prevent Camera Shake (p. 53)
• Customizing the Self-Timer (p. 54)
The number of shots cannot be set.
• Adjusting the White Balance (p. 68)
• Shooting Close-ups (Macro) (p. 72)
• Shooting Far Away Subjects (Infinity) (p. 72)
• Shooting with the AF Lock (p. 76)
• Shooting Using a TV as the Display (p. 79)
• Turning Off the AF Assist Beam (p. 113)
• Displaying the Overlay (p. 115)
84
Using Various Playback and
Editing Functions
This chapter explains various ways to play ack and edit images.
•
Press the 1 button to enter Playode befre operating the camera.
• It may not be possbaor edit images that have been edited
on a comuthavfile names changed, or have been taken
on a diffent camer
• The edit nction (pp. 95 – 96) cannot be used if the memory card does
not have eugh ee space available.
85
Quickly Searching Images
Searching Images Using Index Display
Displaying multiple images at the same time lets you quickly find the image
you want.
Press the g zoom button.
X Images will display in an index.
z The number of images increase each time
you press the g zoom button.
z The number of images decrease each time
you press the k zoom button.
Choose an image.
z Press the opqbuttons to choose an
image
X An ame apears on the chosen
mage
ss tm button to display the chosen
e by self.
Searching fom a large nmber of images
By repeatedly pressing e g zoom button, you can display up to 100 images. If
you press the g zoom button again, an orange frame appears around all of the
images and you can quickly search by pressing the op buttons to switch
between sets of 100 images.
86
Searching for Images Using the Jump Display
When there are many images on the memory card, you can search them by
a specified method or image unit.
Choose a jump method.
z In single image playback, press the o
button.
X The jump method and the position of the
currently displayed image will appear at
the bottom of the screen.
z Press the op buttons to choose the
desired jump method.
Switch images.
z Press thqr buttons.
X Imas will sch according to the chosen
Position of currently
jthod.
displayed image
z To n to single image playback, press
he n button.
Jump 10 Imes
Jump 100 Iges
Jump Shot D
Jump to first
over 10 images at a time.
s over 100 images at a time.
Jumps to the first image in each shooting date group.
Jumps to still images only.
Jump to Movie
Jumps to movies only.
• The number of images matching the jump method will display on the right side of the
screen except for and
.
If there are no images matching the jump method, the qr buttons will not
function.
87
Viewing Slideshows
You can automatically play back images recorded to a memory card.
Choose [Slideshow].
z Press the n button to choose
[Slideshow] from the 1 tab, then press the
m button.
Choose a setting.
z Press the op buttons to choose a menu
item, then press the qr buttons to choose
an option.
Repeat
Replayback of images
PlaDisplay e for each image
Transition effects when switching
between images
ect
e [Start].
z Press the op buttons to choose [Start],
then press the m button.
X The slideshow will start a few seconds
after [Loading image...] displays.
z You can pause/restart a slideshow by
z Press the n button to stop the
slideshow.
• If you press the qr buttons during playback, the image will switch. If you
keep the qr buttons pressed, you can fast-forward through images.
• The power saving function (p. 45) does not work during slideshows.
88
Checking the Focus
You can magnify the area of a recorded image that was inside the AF Frame
to check the focus.
Choose [Focus Check].
z Press the n button to choose [Info
Display] from the 1 tab.
z Press the qr buttons to choose [Focus
Check], then press the n button.
X A white frame will appear where the AF
frame was when the focus was set.
X A gray frame will appear on a face
detected durg playback.
X The area the orange frame appears
d.
itcframes.
ess the k zoom button once.
he screen shown on the left will appear.
z Press the m button to move to a different
frame when multiple frames appear.
Change the magnification level or
location.
z Use the zoom buttons to change the
display size, and the opqr buttons to
change the display position while checking
the focus.
z Press the n button to reset the
display to Step 1.
The focus check display is not available for movies.
89
Magnifying Images
Press the k zoom button.
z The display will zoom in on the image and
will appear. If you continue to hold
the zoom buttons, it will zoom in up to a
maximum factor of approximately 10x.
z If you press the opqr buttons, you can
move the location of the displayed area.
z Press the g zoom button to zoom out, or
continue to hold it to return to single image
playback.
z When
the m button to switch to
appears on the screen, press
. Press
Approximate Location of
Displayed Area
the qr buttons tswitch between images
while zoomedss the m button again
to rethe ornal setting.
• In magnified display, prthe button restores single image
playback.
• Movies cannomag
Changing Image Transitions
You can choose from 2 transition effects when switching between images in
single image playback.
Choose [Transition].
z Press the n button to choose
[Transition] from the 1 tab, then press the
qr buttons to choose a transition effect.
90
Viewing Images on a TV
Using the separately sold AV cable, you can connect the camera to a TV to
view images you have shot.
Turn off the camera and TV.
Connect the camera to the TV.
z Open the camera’s terminal cover and fully
insert the cable plug into the camera’s
terminal.
z Insert the cable plug fully into the video
input terminals as shown in the illustration.
White or black
Yellow
Yellow
Black
rn n the TV and switch it to the
ut te cable is connected to.
urn on the camera.
z Press the 1 button to turn on the camera.
X The image will appear on the TV (nothing
will appear on the screen of the camera).
z After you finish, turn off the camera and
TV, and unplug the cable.
What if the images don’t display correctly on the TV?
Images will not display correctly if the camera’s video output setting (NTSC/PAL)
does not match the TV system. Press the n button and choose [Video
System] from the 3 tab to switch to the correct video system.
91
Protecting Images
You can protect important images so that they cannot be accidentally erased
with the camera (pp. 24, 93).
Choose [Protect].
z Press the n button to choose
[Protect] from the 1 tab, then press the
m button.
Choose an image.
z Press the qr buttons to choose an image,
then press the m button.
X
will appeothe screen.
z Presm bun again to deselect the
imagwill disapear.
chadditional images, repeat the
e pcedure.
t the image.
confirmation screen will appear.
z Press the qr buttons to choose [OK], then
press the m button.
• If you format the memory card (pp. 18, 110), protected images will also
be erased.
• If you switch to Shooting mode or turn off the power before performing the
operations in Step 3, images will not be protected.
Protected images cannot be erased with the camera’s erase function. To
erase an image, cancel protection settings first.
92
Erasing All Images
You can erase all images at once. Since erased images cannot be recovered,
exercise adequate caution before erasing. Protected images (p. 92) cannot
be erased.
Choose [Erase all].
z Press the n button to choose [Erase
all] from the 1 tab, then press the m
button.
Erase all images.
z Press the qr uttons to choose [OK], then
press the m utton.
93
Rotating Images
You can change the orientation of an image and save it.
Choose [Rotate].
z Press the n button to choose [Rotate]
from the 1 tab, then press the m button.
Rotate the image.
z Press the qr buttons to choose an image.
z The image will rotate 90° with each press
of the m button
z Press the n utton to restore the
menen.
94
Resizing Images
You can resize images to a lower pixel setting and save the resized image as
a separate file.
Choose [Resize].
z Press the n button to choose
[Resize] from the 1 tab, then press the
m button.
Choose an image.
z Press the qr buttons to choose an image,
then press the m button.
Choose an image size.
z Press thqr uttons to choose an option,
then press m button.
X w imae?] will appear on the
sc
e the new image.
z Press the qr buttons to choose [OK], then
press the m button.
X The image will be saved as a new file.
Display the new image.
z When you press the n button,
[Display new image?] will appear on the
screen.
z Press the qr buttons to choose [Yes],
then press the m button.
X The saved image will be displayed.
• You cannot resize an image to a larger size.
• Images recorded at a pixel setting of
3 cannot be edited.
(p. 55), or saved as
in Step
• Movies cannot be edited.
95
Correcting the Red-Eye Effect
You can automatically correct red eyes in images and save them as new files.
Choose [Red-Eye Correction].
z Press the n button to choose [Red-
Eye Correction] from the 1 tab, then
press the m button.
Choose an image.
z Press the qr buttons to choose an image.
Correct the image.
z Press the m button.
X Red-eye detecteby the camera will be
corrected aa ame will appear around
the corcted pon.
z You gnify oreduce the size of the
image the procedures in “Magnifying
gesp. 90).
s a new image and display.
z ss the opqr buttons to choose [New
File], then press the m button.
X The image will be saved as a new file.
z Follow Step 5 on p. 95.
• Some images may not be corrected properly.
• When [Overwrite] in Step 4 is chosen, the uncorrected image is
overwritten with the corrected data, erasing the original image.
• Protected images cannot be overwritten.
Movies cannot be corrected.
96
Printing
This chapter explains how to choose images for printing, and print
using a Canon-brand PictBridge compliant rinter (sold separately).
Canon-Brand PictBCompiant Printers
This chapter uses Canon-brand SELPHY CP series printers in the
explanations. The displayed screens and available functions will differ
depending on the printer. Please also refer to the Printer User Guide.
97
Easy Print
You can easily print the pictures you take by connecting the camera to a
PictBridge compliant printer (sold separately) using the supplied interface
cable (p. 2).
Turn off the camera and printer.
Connect the camera to the printer.
z Open the cover and insert the cable’s
small plug firmly into the camera terminal
in the direction shown.
z Insert the cable’arge plug into the
printer. For cntion details, refer to the
user providd with the printer.
n the printer.
Turn on the camera.
z Press the 1 button to turn on the camera.
X
will appear on the screen.
Choose an image.
z Press the qr buttons to choose an image,
then press the m button.
98
Printing Images
Print images.
z Press the op buttons to choose [Print],
then press the m button.
X Printing will start.
z If you want to print additional images,
repeat Steps 5 and 6 after printing has
completed.
z After printing has completed, turn off the
camera and printer, and unplug the
interface cable.
• Refer to p. 34 for Canon-brand Pictbridge ompliant printers (sold
separately).
• Index printing is not available tain Con-brand PictBridge
compliant printers (sold sepa
99
Printing Images
Making Print Settings
Connect the camera to the printer.
z Follow Steps 1 – 5 on p. 98 to display the
screen on the left.
Choose a menu item.
z Press the op buttons to choose an item.
Choose an option.
z Press the qr buttons to choose an option.
Default
Date
Follows the printer's settings.
Prints the date.
File No.
Both
Prints both the date le no.
Prints thber.
Off
—
the inter's settings.
—
Default
f
On
Uoting information to optimize print settings.
Corrects red-eye.
ReEye1
Uses [NR], [Face
image.
] and [Red-Eye1] to correct the
Red-Eye2*
Vivid*
Greens in trees, and blues in the sky and ocean are
enhanced to be more vivid.
NR*
Reduces image noise.
Vivid+NR*
Uses both [Vivid] and [NR] to correct the image.
Corrects brightness for dark faces, such as in backlit
shots.
Face
*
No. of Copies Choose the number of copies.
Trimming
—
—
Choose the area for printing.
Sets the paper size and layout.
Paper Settings
*
Only appears when connected to a PIXMA series printer.
100
Printing Images
Trimming and Printing (Trimming)
You can cut out a portion of an image for printing.
Choose [Trimming].
z Follow Steps 1 – 2 on p. 100 to choose
[Trimming], then press the m button.
X A frame will appear around the portion of
the image to be trimmed.
Choose the trimming area.
z Press the zoom buttons to change the
frame size.
z Press the qr buttons to change the
fosition
Aftressing the n button, press the
op uttons to choose [OK], then press
e m button.
rint.
z Follow Step 6 on p. 99 to print.
• You may not be able to trim images depending on the aspect ratio, or if
they are too small.
• Trimming photos with embedded dates may not show the dates properly.
101
Printing Images
Choosing the Paper Size and Layout for Printing
Choose [Paper Settings].
z Follow Steps 1 – 2 on p. 100 to choose
[Paper Settings], then press the m button.
Choose a paper size.
z Press the op buttons to choose an
option, then presthe m button.
ose paper type.
thop buttons to choose an
n, then press the m button.
Choose a layout.
z Press the op buttons to choose a layout,
then press the m button.
z Press the qr buttons to set the number of
prints when [N-up] is chosen.
Print.
102
Printing Images
Available Layout Options
Default
Follows the printer's settings.
Bordered
Borderless
Prints with a border.
Prints without a border.
Choose how many copies of an images are printed on a
sheet.
N-up
Prints ID photos.
ID Photo
Only images with the same resolution as the camera's
(Large) recording pixel setting can be chosen.
Choose the print size.
Choose from 3.5 x 5 in., postcard and wide sized prints.
Fixed Size
Printing ID Photos
Cho[ID oto].
z Fteps 1 4 on p. 102 to choose
[ID oto], then press the m button.
oosthe length of the long side
short side.
z Press the qr buttons to choose the
length, then press the m button.
Choose the printing area.
z Follow Step 2 on p. 101 to choose the
printing area.
Print.
103
Printing Images
Printing Movies
Connect the camera to the printer.
z Follow Steps 1 – 5 on p. 98 to choose a
movie.
z Press the qr buttons to choose 2, then
press the m button to display the screen
on the left.
Choose a printing method.
z Press the op buttons to choose
, then
press the qr buttons to choose a printing
method.
Print.
Printing methods for m
Single
Prindisplayed scene as a still image.
Prints a uence of images from a specified scene on a
sile sheet of paper.
Sequence
ICaption] is set to [On], you can print the folder number,
file number, and the elapsed time for the frame at the
same time.
• Pressing the m button during printing will cancel printing.
• [ID Photo] and [Sequence] cannot be chosen on Canon-brand PictBridge
compliant printers from CP720/CP730 and earlier models.
104
Choosing Images for Printing (DPOF)
You can choose up to 998 images on a memory card for printing and specify
settings such as the number of copies so that they can be printed together
(p. 107) or processed at a photo developer service. These selection methods
comply with the DPOF (Digital Print Order Format) standards.
Print Settings
You can set the print type, date and file number. These settings apply to all
images chosen for printing.
Choose [Print Settings].
z Press the n button to choose [Print
Settings] from the 2 tab, then press the
m button.
Adjust the tings.
z e op uttons to choose a menu
iten press he qr buttons to choose
an oion.
ess he n button to complete the
tting and restore the menu screen.
Standa
Prints 1 image per page.
Print Type
Prints several reduced size images per page.
Both
On
Off
On
Off
On
Off
Prints both standard and index formats.
Prints the shooting date.
Date
—
Prints the file number.
File No.
—
Removes all print settings after printing.
—
Clear DPOF
data
• Some printers or photo developer services may not be able to reflect all
of the settings in the prints.
•
may appear when using a memory card with print settings set by a
different camera. These settings will be overwritten with those set by your
camera.
• If [Date] is set to [On], some printers may print the date twice.
105
Choosing Images for Printing (DPOF)
• With [Index] chosen, the [Date] and [File No.] options cannot be set to
[On] at the same time.
• The date will be printed in the style set in the [Date/Time] function in the
3 tab, which can be chosen after you press the n button (p. 15).
• Movies cannot be chosen.
Choosing the Number of Copies
Choose [Select Images & Qty.].
z Press the n button to choose [Select
Images & Qty.] from the 2 tab, then press
the m button.
Choose an imae.
z Press the qr bns to choose an image,
thehe m utton.
X You able to st the number of print
ies.
chse images in [Index],
ars on the screen. Press the m
ton again to deselect the image.
disappear.
will
Set the number of prints.
z Press the op buttons to set the number
of prints (maximum 99).
z Repeat Steps 2 and 3 to choose other
images and the number of prints for each.
z You cannot set the number of copies for
index prints. You can only choose which
images to print (as shown in Step 2).
z Press the n button to complete the
setting and restore the menu screen.
106
Choosing Images for Printing (DPOF)
Set All Images to Print Once
Choose [Select All Images].
z Follow Step 1 on p. 106 to choose [Select
All Images], then press the m button.
Make print settings.
press the m button.
Clearing All Selections
Choose [Clear All Selections].
z Follow Step on p. 106 to choose [Clear
All Selectithen press the m button.
All tions ill be cleared.
Prethe qr buttons to choose [OK], then
reshe m button.
Printing hosen imDPOF)
• When there are images added to the print list, the
screen on the left will appear when you connect
the camera to a PictBridge compliant printer.
Press the op buttons to choose [Print now], then
press the m button to easily print images added
to the print list.
• If you stop the printer during printing and start
again, it will start from the next print.
107
108
Changing Camera Settings
You can customize convenient and commonly used functions from the 3 tab
(p. 41).
Low Level Memory Card Formatting
Perform low level formatting when [Memory card error] appears, the camera
does not operate properly, you think that the recording/reading speed of a
memory card has dropped, or recording suddenly stops while shooting a
movie. As you cannot retrieve the erased data, exercise adequate caution
before formatting the memory card.
Choose [Low Level Format].
z Choose [Format], then press the m
button.
z Press the op btons to choose [Low
Level mat], tpress the qr buttons
to d
.
Press pqr buttons to choose [OK],
prs the m button.
he low level format.
z ss the op buttons to choose [OK],
then press the m button.
X Low level formatting starts.
X When low level formatting ends, [Memory
card formatting complete] will appear on
the screen.
Complete the low level format.
z Press the m button.
• Low level formatting may take longer than standard formatting (p. 18),
since all recorded data is erased.
• You can stop a low level format of a memory card by choosing [Stop].
When stopping low level formatting, the data will be erased but the
memory card can be used without problem.
110
Changing Camera Settings
Turning Off the Start-up Image
You can turn off the start-up image that displays when you turn on the
camera.
z Choose [Start-up Image], then press the
qr buttons to choose [Off].
Changing the File Number Assignment
Images you shoot are automatically assignd finumbers in the order they
were taken, from 0001 – 9999, and sd to frs of up to 2,000 images.
You can change the file number ant.
Chose [File Numbering], then press the
r btons to choose an option.
Even if you shoot using a new
memory card, the file numbers
Continuous are assigned consecutively until
an image with the number 9999 is
taken/saved.
If you replace the memory card
with a new one, or a new folder is
created, file numbering begins
Auto Reset
with 0001 again.
• If you use a memory card already containing images, the newly assigned
file numbers may continue the existing numbering for both [Continuous]
and [Auto Reset]. If you want to start over with file number 0001, format
the memory card before use (p. 18).
• Refer to the Software Guide for information regarding folder structure or
image types.
111
Changing Camera Settings
Creating Folders by Shooting Date
Images are saved into folders created each month, however, you can also
create folders by shooting date.
z Choose [Create Folder], then press the
qr buttons to choose [Daily].
z Images will be saved into folders created
on each shooting date.
Changing the Lens Retract Time
For safety reasons, the lens retracts about 1 nutafter pressing the 1
button when in a Shooting mode (p. 23). ou wahe lens to retract
immediately when you press the 1 bt the rract time to [0 sec.].
ose Lens Retract], then press the qr
ns tchoose [0 sec.].
Turning Off the Power Saving Function
You can set the power saving function (p. 45) to [Off]. Setting it to [On] is
recommended to save battery power.
z Choose [Power Saving], then press the m
button.
z Press the op buttons to choose [Auto
Power Down], then press the qr buttons
to choose [Off].
z If you set the power saving function to
[Off], be sure to turn the camera off after
use.
112
Changing Shooting Function Settings
Setting the Screen Shut-Off Time
You can adjust the time the screen takes to shut off automatically (p. 45). This
also works when [Auto Power Down] is set to [Off].
z Choose [Power Saving], then press the m
button.
z Press the op buttons to choose [Display
Off], then use the qr buttons to choose a
time.
z In order to save battery power, you should
choose less than [1 min.].
After pressing the
the settings in the 4 tab (p. 41).
button, press buttoto choose G, then change
Before attempting to ng unction explained in this section in
modes other an Ge fuction is available in those modes
(pp. 130 – 35).
Turning Off the F Assist Beam
The lamp will automatlly light to assist focusing in low light conditions when
you press the shutter button halfway. You can turn off the lamp.
z Choose [AF-assist Beam], then press the
qr buttons to choose [Off].
113
Changing Shooting Function Settings
Turning Off the Red-Eye Reduction Function
The red-eye reduction lamp lights in order to reduce the red-eye effect that
occurs when shooting in dark conditions with the flash. You can turn off this
function.
z Choose [Flash Settings], then press the
m button.
z Press the op buttons to choose [Red-
Eye Lamp], then press the qr buttons to
choose [Off].
Changing the Image Display TimRight After
Shooting
You can change the length of time the displaright after shooting.
ose Review], then press the qr
ns to choose an option.
10 sec. Displays images for the set time.
The image displays until you press
the shutter button halfway.
Hold
Off
Images will not display.
114
Changing Shooting Function Settings
Changing the Way the Image Displays Right After
Shooting
You can change the way the image displays right after shooting.
z Choose [Review Info], then press the qr
buttons to choose an option.
Off
Displays the image only.
Displays detailed information
(p. 128).
Detailed
The area inside the AF frame is
magnified, allowing you to check
Focus Check the focus. The procedure is the
ame as in “Checking the Focus”
. 89).
Displaying the Overlay
You can display grid lines ical horizontal guidance, or a 3:2 guide
to confirm the printable ar" x and postcard size prints.
hoose [Disp. Overlay], then press the qr
buttons to choose an option.
Off
–
Grid Lines
A grid overlays the screen.
Gray bars appear on the top and
bottom of the screen. This area
will not print when printing on
paper with a 3:2 aspect ratio.
3:2 Guide
Both
Both grid lines, and the 3:2 guide
appear.
• In
, you cannot set [3:2 Guide] or [Both].
• Grid lines will not be recorded on the image.
• The gray areas displayed with [3:2 Guide] are the areas that will not be
printed. The actual image recorded will include the portion in the gray
areas.
115
Changing Playback Function Settings
You can adjust the settings in the 1 tab by pressing the 1 button (p. 41).
Choosing the Image that First Displays in
Playback
z Choose [Resume], then press the qr
buttons to choose an option.
Resumes with the image last
Last seen
viewed.
Resumes with the most recently
shot image.
Last shot
116
Replacing the Date/Time Battery
The life of the date/time battery (back-up battery) is approximately 7 years. If
replace the date/time battery with a new one (CR1220).
Turn off the camera.
Open the cover and remove the AA
batteries (p. 12).
Remove the date/time battery
holder.
Replache baery.
(-)
z Inserttery w(+) and (-) sides
enteorrectly.
(
Insert the battery holder.
Insert the batteries and close the
cover.
Turn on the camera and set the
date/time (p. 15).
118
Using Household Power
If you use AC Adapter Kit ACK800 and DC Coupler DR-DC10 (both sold
separately), you can use the camera without worrying about how much
charge is left in the batteries.
Turn off the camera.
Open the cover.
z Follow Step 2 on p. 12 to open the memory
card/battery cover.
z Open the coupler cable port as shown.
Coupler Cable Port
Insert thcopler.
z Inhe couer as shown.
z Make sure the coupler cable passes
through the port.
Cable
Close the cover.
z Close the cover ( ), and press downward
as you slide it until it clicks into place ( ).
119
Using Household Power
Connect the power cord.
z Insert the coupler cable terminal into the
adapter plug.
z Connect the power cord to the compact
power adapter, then plug the other end into
a power outlet.
z Turn the camera on to use it.
z After you finish, turn off the camera and
unplug the power cord from the power
outlet.
Do not unplug the plug or power cord with tcaera turned on. This could
erase images you have taken or dame the era.
120
Troubleshooting
If you think there is a problem with the camera, first check the following. If the
Help Desk as listed on the included customer support list.
Power
You pressed the power button, but nothing happened.
• Confirm that the batteries are the correct type, and are not depleted (p. 14).
• Confirm that the batteries are properly inserted (p. 12).
• Confirm that the memory card/battery cover is securely closed (p. 13).
• If the battery terminals are dirty, battery performance will decrease. Clean the terminals
with a cotton swab and re-insert the batteries several times.
Batteries are consumed quickly.
• Battery performance decreases at low temperatures. Warm the batteries, for example,
by placing them in your pocket, taking care that the teminals do not come into contact
with any metal objects.
Lens will not retract.
• Do not open the memory card/battery hile the wer is on. After closing the
memory card/battery cover, turn the pohen bacff (p. 13).
TV output
Image is distorted not n TV p. 91).
Shooting
Cannot shoot.
• When in Playback m. 17), press the shutter button halfway (p. 19).
Screen does not display properly in dark places (p. 39).
Please note, the following will not be recorded in still images, but will be recorded in movies.
•
When shooting bright light sources, a bar of light (purplish red) may appear on the screen.
The screen turns off and you cannot shoot when you press the shutter button
(p. 22).
appears when the shutter button is pressed halfway (p. 48).
• Set the flash to h (p. 67).
• Increase the ISO speed (p. 69).
• Attach the camera to a tripod.
Image is blurred.
•
Press the shutter button halfway to focus on the subject, then press fully to shoot (p. 19).
• Shoot the subject within the focusing distance (p. 139).
• Set the [AF-assist Beam] to [On] (p. 113).
121
Troubleshooting
• Confirm that functions which you do not intend to use (macro, etc.) are not set.
• Shoot using the focus lock or AF lock (pp. 74, 76).
appear, and the camera does not focus.
• If you center on the light and dark contrasting area of the subject and push the shutter
button halfway, or repeatedly push the shutter button halfway, the AF frame will appear
and the camera will focus.
Subject is too dark.
• Set the flash to h (p. 67).
• Correct the brightness with exposure compensation (p. 67).
• Use spot metering or AE Lock to shoot (pp. 76, 77).
Subject is too bright (overexposed).
• Set the flash to ! (p. 48).
• Correct the brightness with exposure compensation (p. ).
• Use spot metering or AE Lock to shoot (pp. 76, 77
Image is dark even though the flash f2).
• Shoot within an appropriate distance for flagraphy (67).
• Increase the ISO speed (p. 69).
Image taken using the flash it (oerexposed).
• Shoot within an apprriate distah photography (p. 67).
• Set the flash to ! (p48).
Image appears rough or grainy.
• Shoot with the ISO speed on a lower setting (p. 69).
• Depending on the Shooting mode, when shooting in a high ISO speed the image may
appear rough or grainy (pp. 59, 60).
Eyes appear red (p. 79).
• Set the [Red-Eye Lamp] to [On] (p. 114). When shooting with the flash, the lamp (on the
front of the camera) lights (p. 36), and for approximately 1 second while the camera is
reducing red-eye, it is not possible to shoot. It is more effective if the subject is looking
directly at the lamp. Even better results can be obtained by increasing the lighting in
indoor settings or approaching closer to the subject.
• Correct images with red-eye correction (p. 96).
Recording images to the memory card takes a long time, or continuous
shooting slows down.
• Perform a low-level format of the memory card in the camera (p. 110).
Cannot make settings for shooting functions or FUNC. menu.
• The items in which settings can be made differ depending on the shooting mode. Refer
to “Functions Available in Each Shooting Mode” and “Shooting Menu” (pp. 130 – 135).
122
Shooting movies
Correct shooting time does not display, or stops.
• Format the memory card in the camera, or use a memory card capable of recording at
high speeds. Even when the shooting time does not display properly, the recorded
appeared on the screen and shooting ended automatically.
The camera’s internal memory was insufficient. Try one of the following:
• Perform a low-level format of the memory card in the camera (p. 110).
• Change the image quality setting (p. 82).
• Use a memory card capable of recording at high speeds (p. 82).
Zoom does not operate (p. 84).
Playback
Cannot play back images or movies.
• If the file name or folder structure is changed ocoputer, you may not be able to
play back images or movies. Refer to the ftware de for information regarding
folder structure or file names.
Playback stops, or audio cutout.
• Use a memory card that haw-leformat performed on it with this camera
(p. 110).
• If you copy a moe to meat reads slowly, playback may interrupt
momentarily.
• Depending on its pabilitie, when playing movies on a computer, frames may drop or
the audio may cut t.
Computer
Cannot transfer images to a computer.
It may be possible to solve the problem when the camera is connected to a computer via
cable by reducing the transfer speed.
• Press the 1 button to enter Playback mode. Then press and hold the n button
and press the o and m buttons together. In the screen that appears, press the qr
buttons to choose [B] and press the m button.
123
List of Messages That Appear on the Screen
No memory card
• The memory card is not installed in the correct direction. Install the memory card in the
correct direction (p. 13).
Memory card locked
• The SD memory card, SDHC memory card or SDXC memory card’s write protect tab is
set to “LOCK”. Unlock the write protect tab (pp. 12, 13).
Cannot record!
correct direction to shoot (p. 13).
Memory card error (p. 110)
correct direction, contact a Canon Customer Support Help Desk (p. 13).
Insufficient space on card
images (pp. 95 – 96). Erase the images (pp. 93) to space for new images, or
insert an empty memory card (p. 12).
Change the batteries (p. 14)
No Image.
• There are no images recrded ory cd that can be displayed.
Protected! (p. 92)
Unidentified Image/compatible JPEG/Image too large./Cannot play back
MOV/RAW
• Unsupported images, or imes with corrupted data cannot be displayed.
• Images manipulated on a computer, that have had their file name changed, or have
been taken with a different camera may not display.
image.
• Incompatible images cannot be magnified (p. 90), rotated (p. 94), edited (pp. 95 – 96),
or added to a print list (p. 105).
• Images manipulated on a computer, that have had their file name changed, or have
been taken with a different camera may not be magnified, rotated, edited, or added to
a print list.
• Movies cannot be magnified (p. 90).
Exceeded selection limit
• You chose more than 998 images in print settings. Choose less than 998 images
(p. 106).
• Print settings could not be saved correctly. Reduce the number of selected images and
try again (p. 106).
124
List of Messages That Appear on the Screen
Communication error
• Images could not be transferred to the computer or printed due to the large amount of
card reader to transfer the images. Insert the memory card into the printer’s card slot to
print.
Naming error!
• The folder or image could not be created because there is an image with the same file
name as the folder or image that the camera is attempting to create, or the highest
possible file number has already been reached. In the 3 menu, change [File
Numbering] to [Auto Reset] (p. 111) or format the memory card (p. 18).
Lens Error
• This error can occur if you hold the lens while it is in motion or when using it in a location
with excessive dust or sand in the air.
• If this error message continues to appear, contact a Canon Customer Support Help
Desk as there may be a problem with the lens.
A camera error was detected (Error number
• If an error code appears directly after tpicturehe shot may not have been
recorded. Check the image in Playbac
• If this error code reappears, ne Errmber (Exx) and contact a Canon
Customer Support Help Demabe a problem with the camera.
File Error
• Photos from othcameras oat have been altered using computer software
may not be printle.
Print error
• Check the paper size gs. If this message appears when the settings are correct,
turn the printer off and back on, then make the settings again.
Ink absorber full
• Contact a Canon Customer Support Help Desk for an ink absorber replacement.
125
Information Displayed on the Screen
Shooting (Information Display)
Battery Charge Indator
(p. 14)
Date Stamp (p. 51)
ISO Speed (p. 69)
FE Lock (p. 77)
3:2 Guide (p. 115)
Exposure Compensation
Amount (p. 67)
p. 52, 53, 54)
AF Frame (p. 73)
Spot AE Point Frame
(p. 76)
White Balance (p. 68)
My Colors (p. 71)
Drive Mode (p. 70)
Camera Shake Warning
(p. 21)
Metering Method (p. 76)
Compression (Image
Quality) (p. 55) /
Recording Pixels (pp. 55,
82)
Digital Zoom
Magnification (p. 49) /
Digital Tele-converter
(p. 50)
Focusing Range (p. 72),
AF Lock (p. 76)
Shooting Mode (p. 130),
Scene Icon (p. 127)
Flash Mode
Exposure Shift Bar
(p. 83)
Zoom Bar (p. 20)
Still Images: Recordable
Shots (p. 56)
(pp. 48, 67, 78)
Red-Eye Correction
(p. 96)
Movies: Remaining Time
(p. 82)
126
Information Displayed on the Screen
Scene Icons
In » mode, the camera displays an icon for the scene it has determined and
then automatically focuses and selects the optimum settings for subject
brightness and color.
Subject
People
Non-Human Subjects
Icon
Background
Color
With
Strong
Facial
When
Close
Background
Bright
Backlit
Shadows
Gray
—
Including Blue
Skies
—
—
—
Light Blue
Backlit
Spotlights
Dark
—
Dark Blue
When Using
Tripod
*
*
—
—
*
Appears when the scene is dark and the camera is attached to a tripod.
127
Information Displayed on the Screen
Playback (Detailed Information Display)
Shooting Mode (p. 130)
ISO Speed (p. 69)
Amount (p. 67),
Exposure Shift Amnt
(p. 83)
Histogram (p. 39)
Image Editing
Fober – File
/ Total number of images
Shutter Speed, Image
Quality (Movies) (p. 82)
Aperture Value
File Size (pp. 56, 82)
Pixels (p. 55)
(p. 82)
Protect (p. 92)
My Colors (p. 71)
Red-Eye Correction
(pp. 79, 96)
Shooting Date and Time
(p. 15)
(pp. 95 – 96)
Compression (Image
Quality) (p. 55) /
Flash (p. 67)
Focusing Range (p. 72)
Recording Pixels (pp. 55,
82), AVI (Movies)
128
Information Displayed on the Screen
Summary of Movie Control Panel in “Viewing Movies”
(p. 27)
Exit
Playback
Slow motion playback (You can use the qr buttons to adjust the speed. Sound
will not play back.)
Skip backward* (Continues to skip backward if button is held.)
Previous frame (Rewind if you hold down the m button.)
Next frame (Fast forward if you hold down the m button.)
Skip forward* (Continues to skip forward if button is held.)
Appears when connected to a PictBridge copliant printer (p. 104).
* Displays the frame of approx. 4 sec. before aftthe current frame.
You can skip forward and skip ard dug movie playback by
pressing the qr buttons.
129
Shooting modes
K
»
G
Function
I
V
{
{
{
{
{
{
{
{
{
—
{
—
—
—
{
—
—
Exposure Compensation (p. 67)
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
{
{
{
{
{
—
—
—
—
—
{
{
—
{
—
—
—
{
—
—
Ò
Self-Timer (pp. 52, 53, 54)
Custom Timer (p. 54)
$
Delay *1
Shots *2
h
…
—
*
Flash (pp. 48, 67, 78)
{
—
—
—
{
—
—
AE Lock (p. 77)/FE Lock (p. 77) *5
AE Lock/Exposure Shift (Movies) (p
AF Lock (p. 76)
Focusing Range (p. 72)
e
u
*1 Cannot be set to 0 seconds when in modes where the number of shots cannot be set.
*2 Fixed to 1 shot when in modes where the number of shots cannot be set.
*3 Cannot be set, but switches to … depending on the circumstances.
*4 Cannot be set, but switches to … when the flash fires.
*5 FE Lock not available when set to !.
130
Functions Available in Each Shooting Mode
K
O
{
E
w
{
{
{
{
{
{
{
{
{
—
{
—
—
{
{
P
{
{
{
{
{
{
{
{
{
—
{
{
{
U
t
{
{
{
{
{
{
{
—
—
—
—
{
—
—
≈
{
{
{
{
{
{
{
{
—
—
{
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
*4
—
{
{
{
{
{
{
{
{
—
{
—
—
—
{
{
{
—
{
{
{
{
{
{
—
{
*4
—
{
{
{
{
{
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
—
{
{
{
—
—
{
{
{
{
—
—
—
{
{
{ Selectable, or set automatically. – Not selectable.
131
Functions Available in Each Shooting Mode
FUNC. Menu
Shooting modes
K
»
G
Function
I
V
{
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
—
—
{
—
—
—
—
—
{
—
—
—
—
—
{
—
—
—
—
—
ISO Speed (p. 69)
{
—
—
—
—
—
{
{
{
{
{
{
{
{
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
White Balance (p. 68)
{
—
—
—
—
—
{
—
—
—
—
—
{
—
—
—
—
—
My Colors (p. 71)
*
*2
{
—
{
{
{
—
—
—
—
—
{
{
{
—
—
{
{
{
—
—
Drive Mode (p. 70)
W
{
—
—
{
—
—
Metering Method (p. 76)
{
{
{
—
{
{
{
—
{
{
{
—
{
{
{
—
Recording Pixels (p. 55)
{
—
—
{
{
{
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
—
—
—
{
{
—
—
—
Compression Ratio
(Image Quality) (p. 55)
Image Quality (Movies) (p. 82)
*1 White balance is not selectable.
*2 Contrast, sharpness and color saturation can be set in 5 levels.
132
Functions Available in Each Shooting Mode
FUNC. Menu
K
E
w
O
P
U
t
≈
—
{
—
—
—
—
—
{
—
—
—
—
—
{
—
—
—
—
—
{
—
—
—
—
—
{
—
—
—
—
—
{
—
—
—
—
—
{
—
—
—
—
—
{
—
—
—
—
—
{
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
—
—
{
—
—
—
—
—
{
—
—
—
—
—
{
—
—
—
—
{
—
—
—
—
—
—
—
{
—
—
—
—
—
{
{
{
—
—
—
—
—
{
{
{
—
—
{
{
{
—
—
{
{
{
—
—
{
{
{
—
—
{
{
{
—
—
{
{
{
—
—
{
{
{
—
—
{
—
—
{
—
—
—
—
—
—
—
—
—
—
{
{
{
—
{
{
{
—
{
{
{
—
{
{
{
—
{
{
{
—
{
{
{
—
{
{
{
—
{
{
{
—
{
—
—
{
{
{
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
—
—
—
{
{
—
—
—
{
{
{
{ Selectable, or set automatically. — Not selectable.
133
Menus
4 Shooting Menu
Shooting modes
K
»
G
Function
I
V
Face AiAF *1
{
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
—
AF Frame (p. 73)
Center
Normal
Small
Standard
Off
AF Frame Size (p. 74) *2
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
Digital Zoom (pp. 49, 50)
1.4x
2.3x
On
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
AF-Point Zoom (p. 75)
AF-assist Beam (p. 113)
Off
On
Off
Red-Eye
ReEye
O
On
Off
Flash Settings (pp. 79, 114)
Off
Shooting Info (p. 38)
Review (p. 114)
On
O
Hold
Off
Review Info (p. 115)
Disp. Overlay (p. 115)
Date Stamp (p. 51)
Detailed
Off
Grid Lines
3:2 Guide
Both
Off
Date
Date & Time
*1 Operation differs depending on the shooting mode when faces are not detected.
*2 Available when the AF frame is set to [Center].
134
Menus
K
O
E
w
P
U
t
—
≈
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
—
{
{
—
{
{
{
{
—
{
{
—
—
—
{
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
{
{
—
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
—
—
—
—
{
{
—
—
{
—
—
{ Selectable, or set automatically. — Not selectable.
135
Menus
3 Set up Menu
Item
Content
Ref. Page
p. 42
Mute
On/Off*
Volume
Set all operation sounds (5 levels).
On*/Off
p. 43
Start-up Image
Format
p. 111
Formats memory card, erasing all data
Continuous*/Auto Reset
Monthly*/Daily
pp. 18, 110
p. 111
File Numbering
Create Folder
Lens Retract
p. 112
1 min.*/0 sec.
p. 112
Auto Power Down: On*/Off
Display Off: 10, 20 or 30 sec./1*, 2 or 3 min.
pp. 45, 112,
113
Power Saving
Date/Time
Video System
Language
Reset All
Date and time settings
NTSC/PAL
p. 16
p. 91
p. 17
p. 44
Choose display lane.
Returns camera setting
*
Default setting
1 Playback Menu
Item
Content
Ref. Page
p. 38
Info Display
Slideshow
Erase All
Off*/Sndard/Detailed/Focus Check
back images automatically.
Erases all images.
p. 88
p. 93
Protect
Protects images.
p. 92
Rotate
Rotates images.
p. 94
Red-Eye Correction
Resize
Corrects red eyes in still images.
Resizes and saves still images.
Last seen*/Last shot
p. 96
p. 95
Resume
p. 116
p. 90
Transition
Fade*/Slide/Off
*
Default setting
136
Menus
2 Print Menu
Item
Content
Ref. Page
Print
Displays printing screen (When connected to a
printer).
—
Select Images & Qty.
Select All Images
Clear All Selections
Print Settings
Chooses individual images for printing.
Chooses all images for printing.
Cancels all settings for printing.
Sets the printing style.
p. 106
p. 107
p. 107
p. 105
137
Handling Precautions
•
•
This camera is a high-precision electronic device. Do not drop it or subject
it to strong impacts.
Never place the camera close to magnets, motors or other devices that
generate strong electromagnetic fields. Exposure to strong magnetic fields
may cause malfunctions or corrupt image data.
•
•
•
If water droplets or dirt become stuck on the camera or screen, wipe with
a dry soft cloth or eyeglass wiper. Do not rub or apply force.
Never use cleaners containing organic solvents to wipe the camera or
screen.
Use a commercially available blower brush to remove dust from the lens.
For stubborn dirt contact a Canon Customer Support Help Desk as listed
on the customer support leaflet supplied with your camera.
When you move the camera rapidly from cold to hot temperatures,
condensation may form on the internal or externsurfaces of the camera.
To avoid condensation, put the camera in an at, resealable plastic bag
and let it adjust to temperature chanwly bere removing it from the
bag.
•
•
If condensation has formed cama, stop using it immediately, as
continued use may damageraRemove the batteries and
memory card, anwaiuntiure has completely evaporated
before resuming se.
138
Specifications
Image Sensor
Camera Effective Pixels..................Approx. 10 million pixels
Lens
Focal Length ...................................3.3x zoom: 6.6 (W) – 21.6 (T) mm
(35mm film equivalent: 37 (W) – 122 (T) mm)
Focusing Range..............................1 cm (0.4 in.) – infinity (W), 25 cm (9.8 in.) – infinity (T)
•
Macro: 1 – 50 cm (0.4 in. – 1.6 ft.) (W), 25 – 50 cm (9.8
in. – 1.6 ft) (T)
Imaging Processor...............................DIGIC III
LCD Monitor
Type ................................................TFT color
Size .................................................2.5 type
Effective Pixels................................Approx. 115,000 dots
Aspect Ratio....................................4:3
Focus
Control System................................Autofocus: Sin(Ctinuous in Auto mode)
AF Frame ........................................Face AiCenter
Metering System..................................Evalnter-weited average, Spot
Exposure Compensation (Still Ima
Exposure Shift (Movies) ...........ops 1/3-stop increments
ISO Speed (Standard put Se
Recommended Expure Index).SO 100/200/400/800/1600 (In G mode)
White Balance ................................to, Day Light, Cloudy, Tungsten, Fluorescent,
Fluorescent H, Custom
Shutter Speeds...........................1 – 1/2000 sec.
15 – 1/2000 sec. (Total shutter speed range)
Aperture
Type ................................................Circular (Used together with ND filter)
f/number..........................................f/3.0 / f/9.0 (W), f/5.8 / f/17 (T)
Flash
Modes .............................................Auto, on, Slow Synchro, off
Range..............................................30 cm – 3.0 m (W), 30 cm – 2.0 m (T)
(12 in. – 9.8 ft. (W), 12 in. – 6.6 ft. (T))
1
2
Shooting Modes...................................P, Auto, SCN* , Movie*
*1 Blur Reduction, Portrait, Kids&Pets, Face Self-timer,
Low Light, Super Vivid, Poster Effect, Beach, Foliage,
Snow, Sunset, Fireworks, Long Shutter
*2 Standard
Digital Zoom ........................................Still images/Movies: Approx. 4.0x (up to approx. 13x in
combination with the optical zoom)
Safety Zoom, Digital tele-converter
139
Specifications
Continuous Shooting
Mode...............................................Normal
Speed (Normal)...............................Approx. 0.8 shots/sec. (In G mode)
Approx. 2.2 shots/sec. (In Blur Reduction and Low Light
mode)
Number of Shots (Approximate)
(CIPA compliant) .................................Alkaline: Approx. 300
NiMH: Approx. 500
Recording Media.................................SD memory card, SDHC memory card, SDXC memory
card, MultiMediaCard, MMCplus card, HC MMCplus card
File Format..........................................Design rule for Camera File system, DPOF (Version 1.1)
compliant
Data Type
Still Images .....................................Exif 2.3 (JPEG)
Movies.............................................AVI (Image data: Motion PEG, Audio data: WAVE
(monaural)
Number of Recording Pixels
Still Images .....................................Large: 3, Mediu1: 2816 x 2112, Medium 2:
x 120l: 640 x 48, Widescreen: 3648 x 2048
o 16x 1200 in Blur Reduction and Low Light.
Movies.........................................640 480 (30 fps*, 30 fps LP*), 320 x 240
ame rate is 29.97 fps.
Interface ........................................Hi-Speed USB
Analog audio output (monaural)
Analog video output (NTSC/PAL)
Direct Print Standard...........................PictBridge
Power Source......................................AA alkaline batteries (AA NiMH batteries NB-3AH) x 2
Compact Power Adapter CA-PS800
(Use together with DC Coupler DR-DC10)
Dimensions (CIPA compliant) .............94.3 x 61.6 x 31.2 mm (3.71 x 2.43 x 1.23 in.)
Weight (CIPA compliant).....................Approx. 186 g (6.56 oz.) (Including the battery and
memory card)
Approx. 138 g (4.87 oz.) (camera body only)
•
•
All data is based on tests by Canon.
Camera specifications or appearance are subject to change without notice.
140
Index
AE Lock ...............................................77, 83
AF Frames...........................................21, 73
AF J Focus
AF Lock .............................................76, 126
AV Cable ...................................................91
E
Editing
Error Messages .......................................124
Battery and Charger Kit......................33
Charge Indicator .................................
J Date/Time Battery
F
Black and White Imas.........
Camera
Slow Synchro......................................78
Focus
Default Settings ..................................44
Holding the Camera............................11
Components Guide....................................36
Macro..................................................72
Foliage (Shooting Mode) ...........................59
Format J Memory Cards, Formatting
Formatting (Memory Card) ................18, 110
FUNC. Menu
Date/Time
Adding to Image..................................51
Changing ............................................16
Date/Time Battery.............................118
Setting ................................................15
Default Settings.........................................44
DIGITAL CAMERA Solution Disk ................2
Digital Tele-Converter................................50
Menu...................................................40
141
Index
Movies
Image Quality (Recording Pixels/
Grid Lines........................................ 115, 126
H
Images
Portrait (Shooting Mode) ...........................58
...................................................92
Display Time..................................... 114
Editing J Editing
Erasing Images............................. 24, 93
Playback J Viewing
Protect................................................ 92
Included Items J Accessories
Indicator............................................... 37, 39
Infinity (Focus Mode)................................. 72
ISO Speed......................................... 69, 126
R
Jump Display...................................
K
Kids&Pets (Shooting Mo) .................... 58
S
Lamp ......................................... 36, 113, 114
LCD Monitor J Screen
Menu J FUNC. Menu, Menu
Long Shutter (Shooting Mode) .................. 63
Low Light (Shooting Mode) ....................... 59
Memory Cards
Available Shots............................. 14, 56
Formatting .................................. 18, 110
Shooting Time .............................. 26, 82
Menu
Basic Operations ................................ 41
List.................................................... 134
Metering Method ....................................... 76
Mode Button.............................................. 36
Changing Delay and Number of
Shots ..................................................54
Face Self-Timer (Shooting Mode) ......62
Two Second Self-Timer......................53
Sepia Tones ..............................................71
Shooting
Display Overlay ................................115
Number of Shots...........................14, 56
142
Index
Slideshow..................................................88
Software
DIGITAL CAMERA Solution Disk .........2
Installation...........................................29
Software Guide.....................................2
Transferring Images to a Computer
Sunset (Shooting Mode)............................59
Super Vivid (Shooting Mode).....................61
T
Video J Movies
Viewing
Images on a TV ..........................91
Index Display ..........................86
Magnified Display ...............................90
Single Image Playback .......................23
Slideshow ...........................................88
W
White Balance ...........................................68
Wide (Recording Pixels)......................55, 56
Z
Zoom ...................................................20, 25
143
MEMO
144
MEMO
145
MEMO
146
MEMO
147
Disclaimer
• Reprinting, transmitting, or storing in a retrieval system any part of this
guide without the permission of Canon is prohied.
• Canon reserves the right to change the conntof this guide at any
time without prior notice.
• Illustrations and screenshots in this may difr slightly from the
actual equipment.
• The above items notwithsCann accepts no liability for
damages due to miaken of te products.
CDP-E113-010
© CANON INC. 2011
|
American Audio Q 3433 User Manual
AOC Car Video System E960S User Manual
Cateye CC RD100 User Manual
Clarion DB345MP User Manual
Extron electronic Extron Electronics Cable Box 200 User Manual
Fusion Electronics Car Amplifier CA DA41400 User Manual
Gefen EXT DPSB 50 User Manual
Huey Chiao HCB35 User Manual
Jensen MP7720 User Manual
JVC Everio GZ MS240 User Manual