Bosch Appliances MUM 7220 UC User Manual

Owner’s Manual  
Concept Series Kitchen Machines  
for models:  
MUM 7000 UC • MUM 7100 UC  
MUM 7010 UC • MUM 7150 UC  
MUM 7220 UC  
READ THIS MANUAL  
thoroughly for important safety and operating  
instructions before using this appliance.  
TABLE OF CONTENTS  
IMPORTANT SAFEGUARDS .................................................................. 2  
Table of contents..................................................................................... 3  
ABOUT YOUR KITCHEN MACHINE ....................................................... 4  
Bosch Concept Series Kitchen Machine ................................................. 4  
Unpacking............................................................................................... 4  
Electrical specifications ............................................................................ 4  
Before using for the first time .................................................................. 4  
Getting to know your Bosch Kitchen Machine ......................................... 6  
Special accessories ..................................................................... 6  
Power unit features ................................................................................. 6  
Getting started ..................................................................................... 7-9  
STANDARD ATTACHMENTS .................................................................. 9  
Mixing bowl w/twin beating whisks and dough hook ............................. 9  
How to use dough hook ......................................................... 10-11  
Placing into operation with dough hook....................................... 11  
How to use twin beating whisks .................................................. 11  
Operation with dough hook and whisk assembly.......................... 12  
Use of mixing bowl with twin beating whisks............................... 13  
Placing into operation with twin beating whisks .......................... 14  
Care and cleaning of bowl and its accessories ........................... 14  
Blender with unbreakable plastic jar ..................................................... 15  
How to use blender...................................................................... 15  
Placing blender into operation...................................................... 16  
Example of use of blender ........................................................... 16  
Care and cleaning of blender........................................................ 17  
Slicer/shredder with unbreakable bowl ................................................ 17  
Slicer/shredder, intended use ...................................................... 18  
Placing slicer/shredder into operation .......................................... 19  
Care and cleaning of slicer/shredder ............................................ 20  
Food processor with unbreakable bowl................................................. 20  
How to use food processor blade ................................................. 20  
Placing into operation with food processor blade.......................... 22  
Examples of use of food processor .............................................. 22  
Care and cleaning of food processor blade and bowl .................... 23  
How to use discs w/5-cup capacity bowl ..................................... 23  
Placing into operation with discs and disc holder......................... 24  
Care and cleaning of discs, disc holder and bowl......................... 24  
SERVICE and REPAIR .......................................................................... 24  
TROUBLESHOOTING ................................................................. 25  
SAMPLE RECIPES .......................................................................... 26-27  
SPECIAL ACCESSORIES ..................................................................... 30  
BOSCH small appliance warranty ........................................................... 31  
HOUSEHOLD USE ONLY  
3
The MUM 7150 UC  
ABOUT YOUR KITCHEN MACHINE  
comprised of the electronic power unit  
with integral cord storage, six-cup  
capacity blender (MUZ7MX1), six-quart  
capacity mixing bowl, bowl lid with  
integral filling funnel and cover  
(MUZ7KR1), twin beating whisks, dough  
hook, five-cup capacity food processor  
with safety locking lid (MUZ7MM2) and  
motor drive cover.  
Congratulations on having selected one of  
the Bosch Concept Series Kitchen  
Machines. A series of kitchen machines that  
we, and—thankfully—cooking professionals  
the world over, feel are the best household-  
type kitchen machines available.  
As you read through these instructions,  
please pay particular attention to the  
IMPORTANT SAFEGUARDS. Specific  
safeguards for the attachments as well as  
warnings and cautions are provided in each  
section describing the operation of that  
particular attachment.  
The MUM 7220 UC  
comprised of the electronic power unit  
with integral cord storage, 12-cup  
capacity slicer/shredder with three  
stainless steel blades (MUZ7TS1), six-  
cup capacity blender (MUZ7MX1), six-  
quart capacity stainless steel mixing  
bowl, bowl lid with integral filling tube  
and cover (MUZ7ER1), twin beating  
whisks, dough hook, safety cover and  
bowl scraper.  
Bosch Concept Series Kitchen Machine  
The Bosch Concept Series Kitchen  
Machine is available in 5 models:  
The MUM 7000 UC  
comprised of the electronic power unit  
with integral cord storage, six-quart  
capacity mixing bowl, bowl lid with  
integral filling tube and cover  
(MUZ7KR1), twin beating whisks, dough  
hook, motor drive cover and bowl  
scraper.  
Unpacking  
Carefully remove the power unit from its  
packaging and place it on the counter so it  
is ready to use. As you remove the  
accessories from the carton, check them  
against Figure 1 to assure that all the  
standard parts are present.  
Electrical Specifications  
The MUM 7010 UC  
Check to make sure that the voltage on  
which your kitchen machine is to operate  
is the same as specified on the rating plate.  
Standard North American models have an  
electrical power rating of 700-watt maximum  
power rating with the accessory attachment  
that draws the most power (some accessory  
attachments may draw less power).  
comprised of the electronic power unit  
with integral cord storage, six-quart  
capacity mixing bowl, bowl lid with  
integral filling tube and cover  
(MUZ7KR1), twin beating whisks,  
professional-style dough hook, motor  
drive cover and bowl scraper.  
The MUM 7100 UC  
Before Using for the First Time  
comprised of the electronic power unit  
with integral cord storage, six-cup  
capacity blender (MUZ7MX1), six-quart  
capacity mixing bowl, bowl lid with  
integral filling funnel and cover  
(MUZ7KR1), twin beating whisks, dough  
hook and motor drive cover.  
Before using any of the attachments for the  
first time it is recommended they be washed,  
rinsed well and dried. Of the attachments  
supplied, with the systems in this manual,  
all parts, except the whisk holder for the  
twin beating whisks and the blender’s  
blade/base assembly, are dishwasher safe:  
4
MUM 7220 UC  
MUM 7010 UC  
MUM 7100 UC  
MUM 7150 UC  
MUM 7000 UC  
Figure 1  
5
Bosch Small Appliances  
Customer Support  
BSH Home Appliances  
5551 McFadden Avenue  
Huntington Beach, CA 92649  
> The whisk holder should be hand  
washed in warm soapy water, rinsed  
and dried.  
> The blender’s blade/base assembly  
should be washed under running water  
and dried.  
or call us at:  
Note: It is recommended that the blender’s  
blade/base assembly never be left to  
stand in water or soap solution to prevent  
the bearing lubricant from being washed out.  
1 (866) 44BOSCH  
[1 (866) 442-6724]  
Getting to Know Your Bosch Kitchen  
Machine  
Power Unit Features  
All MUM 7000 power units have the following  
The Bosch Concept Series Kitchen  
Machines are comprised of various  
attachments, depending on the system  
purchased (see above). In addition to the  
attachments listed on the previous pages  
that are available with the standard systems,  
Bosch offers many special accessories.  
features, refer to figure 2:  
700-watt motor  
The most powerful motor offered with any  
household kitchen machine.  
Electronic speed control  
Special Accessories  
Six-position rotary switch is located at front  
of power unit: 4 speeds plus a momentary  
pulse function and a stop position “O/Off,”  
see figure 2a.  
To allow you to get the most service from  
your Bosch Concept Series Kitchen  
Machine, Bosch engineers have designed  
a line of special accessories to expand the  
usefulness of your machine. In addition to  
the attachments that come with the various  
Concept Series Kitchen Machines, there  
are optional accessories that can be ordered  
separately. These accessories include a  
food and meat grinder, grain mills, citrus  
juicer and ice cream maker, plus additional  
attachments that can be used with the meat  
grinder: fancy cookie attachment, fruit  
pulper, pasta-making disks and grater  
Control status indicator  
Indicates when power unit is functioning  
normally, or if there is a problem that has  
caused the electronic safety control to be  
activated, see figure 2b:  
• The indicator will glow steadily when  
the power unit is functioning normally.  
or,  
• The indicator will flash if the electronic  
safety control of the power unit has  
been activated.  
attachment.  
See  
SPECIAL  
ACCESSORIES, at the back of this  
booklet, page 30. Or, to view all currently  
available accessories, visit our Web site at  
Mono drive  
Four electronically controlled shaft speeds  
are all available from a single location; each  
attachment automatically connects to the  
appropriate drive speed.  
Work on expanding the usefulness of the  
Bosch Kitchen Machine is a continuing  
process. If there is some type of accessory  
in which you are interested in that is not  
included at the back of the book, please  
either write us at:  
Motor drive cover  
Used to cover mono drive when not in use,  
see figure 2c.  
6
Gentle start  
Getting Started  
The operation of your Bosch Concept Series  
Kitchen Machine is summarized below.  
a special feature that brings the motor up  
to speed over a two-second period; limiting  
splashing.  
Specific instructions for using each of the  
attachments, provided with the kitchen  
machine systems covered by this manual,  
follow the summarized instructions. Please  
read the specific instructions thoroughly  
before using that attachment, paying  
particular attention to the IMPORTANT  
SAFEGUARDS and WARNINGS provided.  
Convenient cord storage  
Convenient cord storage is located on the  
back of the power unit, see 2d.  
Integrated hand grips  
Side recesses provide for easy lifting and  
carrying of power unit when not in use, see  
2e.  
1. Place power unit on suitable work  
surface.  
Four rubber feet  
Before using the machine with any of  
the attachments the power unit should  
be placed on suitable work surface.  
The surface should be sturdy, smooth  
and clean; make sure that there is  
Four rubber feet with formed suction cups  
provide the ultimate in stability, while also  
serving to isolate the power unit from the  
hard surface to minimize noise and  
vibration. Need clean smooth surface, see  
figure 2f.  
Figure 2.  
7
no flour or oil on the surface. A clean  
smooth surface will provide the best  
footing for the suction cup feet on  
the power unit and will limit slipping  
and/or “walking.”  
All models of the Bosch Concept  
Series Kitchen Machines incorporate  
an electronic safety control to protect  
the motor. If the safety becomes  
activated, the indicator will flash. See  
TROUBLESHOOTING at the back of  
this manual if status indicator is  
flashing.  
2. Plug power unit into power supply.  
Unwind the power unit’s cord to  
appropriate length and plug it into  
a convenient nearby receptacle.  
3. Remove motor drive cover.  
Remove motor drive cover from mono-  
drive, see figure 2c.  
4. Select attachment to be used.  
Select attachment you wish to use  
and place on power unit. See specific  
instructions for attachment selected.  
Specific instructions are located on  
pages listed below:  
Figure 3.  
6. Turn power unit off.  
When your work with the attachment  
is completed or the capacity of the  
batch feed attachment has been  
reached, turn the power unit to off  
position, “O/Off” and unplug.  
Attachment  
Pages  
Mixing bowl w/dough hook ........ 9-11  
Mixing bowl w/twin whisks ....... 11-14  
Blender ..................................... 15-17  
Slicer/shredder ......................... 17-20  
Food processor ........................ 20-24  
7. Remove the attachment.  
Remove the attachment from the  
power unit, per instructions for the  
specific attachment being used.  
Table 1.  
5. Operate unit with rotary switch.  
Once the attachment is in place, the  
speed of its moving components can  
be controlled through the use of the  
rotary switch at the front of the power  
unit. See figure 2a. The rotary switch  
has six positions:  
8. Continue use.  
If the attachment was of the batch feed  
type and you wish to continue using  
the attachment, empty the bowl or jar  
of the attachment per its specific  
instructions and reinstall the  
attachment as before. Repeat the  
steps 5 through 7 as often as  
necessary to complete necessary  
work.  
a. “M,” a momentary “pulse” position  
that provides full speed and power  
for the time it is held in position.  
b. “O/Off,” the off position.  
and  
9. Work completed,  
c. Four speeds labeled 1, 2, 3 and 4.  
Speed 1 is the lowest speed. The  
speed increases with each  
succeeding step up to the highest  
speed, speed 4.  
remove attachment.  
If the attachment is of the continuous  
feed type or is the batch type and you  
have completed the work you wished  
8
to perform with the attachment,  
remove the attachment from the power  
unit per the instructions for the specific  
attachment being used.  
STANDARD ATTACHMENTS  
Following are the specific instructions for  
the standard attachments provided with the  
Bosch Concept Series Kitchen Machines  
covered by this manual.  
10. Place contents (batch feed type)  
If the attachment is the batch feed  
type, disassemble per the specific  
attachment’s instructions and place  
the contents in a suitable container.  
Mixing Bowl with Twin Beating Whisks  
and Dough Hook  
(MUZ 7 KR1 or MUZ 7 ER1)  
WARNING  
11. Care and Cleaning  
1. There is a risk of injury from rotating  
tools when using the mixing bowl with  
the dough hook or the twin beating  
whisks.  
Once you have completed working  
with the Bosch Kitchen Machine, the  
next step is to disassemble and clean  
the attachments. If you wish to use  
another attachment please return to  
step 4, above.  
2. Avoid contact with moving parts. Keep  
hands, hair, clothing, as well as  
spatulas, bowl scrapers and other  
utensils away from dough hook and  
whisks during operation to prevent  
injury, and/or damage to the power unit  
or accessories.  
3. Always work with the bowl lid fitted in  
place.  
4. Do not change tools until the power unit  
has come to a complete stop; when  
switched off, the power unit will continue  
to turn for a brief period.  
Power unit  
With the power unit turned off and  
unplugged, it should be cleaned only with  
a clean, damp cloth. Never use coarse or  
caustic cleaning products to clean the  
power unit. Never immerse the power unit  
in water. Then wipe off the motor drive cover  
and reinstall on the power unit.  
The power unit may be left on the counter  
or stored for future use. In either case,  
always be sure to replace the motor drive  
cover on the mono drive. This will prevent  
dust and/or flour build-up in the drive.  
All models of the Bosch Concept Series  
Kitchen Machines are provided with a six-  
quart mixing bowl with twin beating whisks  
and dough hook. You may have either the  
stainless steel bowl or the plastic mixing  
bowl with the twin beating whisks and dough  
hook, see figure 1. Or you may have the  
standard dough hook or the professional  
dough hook. Additional mixing bowls are  
available as accessory items under the part  
numbers: MUZ 7 ER1 and/or MUZ 7 KR1,  
refer to SPECIAL ACCESSORIES section  
at the back of this manual. The mixing bowl  
with dough hook and twin beating whisks  
consists of the following components,  
dependent upon the system you have, see  
figure 4:  
The Bosch Concept Series Kitchen  
Machines have been specially designed to  
enable them to be stored in a drawer. Wind  
the cord around the cord holder and, using  
the carry grips, lift the power unit and place  
in your chosen storage area.  
Attachments  
The attachment(s) that have been used  
should be disassembled and washed, per  
their specific instructions, dried and stored  
for future use.  
9
a.  
and that you have removed the motor drive  
cover.  
1. Before using the mixing bowl and  
dough hook for the first time, it  
is recommended that the bowl,  
anti-splash cover, filling funnel cap  
and dough hook be washed. All  
components of the mixing bowl and the  
dough hook are dishwasher safe. Or  
they may be washed in warm soapy  
water. After washing, rinse well and dry  
before using.  
c.  
e.  
d.  
b.  
The driveshaft can be removed for  
cleaning by pushing down on the shaft,  
as shown in figure 5a. After washing,  
rinse and dry the driveshaft and replace  
in the bowl by pressing it in, from the  
bottom, as shown in figure 5b, until it  
snaps into place.  
Figure 4.  
4a. Bowl (either stainless steel or  
plastic) with anti-splash cover and  
filling funnel cap  
a.  
b.  
4b. Standard dough hook (all systems  
except MUM 7010 UC)  
4c. Twin beating whisks  
4d. Professional dough hook (MUM  
7010 UC model only)  
Figure 5.  
4e. Bowl scraper  
2. If you have not already done so, remove  
the motor drive cover from the power  
unit’s mono drive and place the mixing  
bowl, whether the stainless bowl or the  
plastic bowl, on the mono drive of the  
power unit and turn the bowl counter-  
clockwise with a slight downward  
pressure until bowl is firmly seated on  
the mono drive coupling, see figure 6.  
How to Use Dough Hook  
The dough hook and mixing bowl are  
intended to be used to knead yeast doughs  
and to mix cookie and pastry doughs and  
also when adding nuts, chocolate chips,  
dried fruit, hard butter or shortening,  
hardened brown sugar, etc. to batters.  
Use of mixing bowl with dough hook  
CAUTION  
Before beginning to attach this or any other  
attachment, make sure that the power unit  
is on a smooth, clean, suitable work  
surface and switched to off position “O/Off,”  
Failure to make sure that the bowl is  
properly seated on the mono drive coupling  
before the power unit is turned on can result  
in damage to the bowl and/or coupling.  
10  
8b), but the cover and cap should be in  
place whenever the power unit is in  
operation. The anti-splash cover and  
cap serve to prevent the escape of flour  
dust at the beginning of the stirring and  
kneading process and also serves to  
prevent accidental contact with the  
moving dough hook.  
Plastic Bowl  
Stainless Steel Bowl  
Figure 6.  
3. There are two styles of dough hook  
used with the Bosch Machine, the  
standard and the professional, but no  
matter which one you have they are  
mounted in the mixing bowl in the same  
way: engage the dough hook on the  
driveshaft of the mixing bowl by placing  
it over the center column, as shown in  
figure 7. Once in place, check to make  
sure dough hook has engaged the  
driveshaft by turning the dough hook  
clockwise while pushing down until it  
stops.  
a.  
b.  
Figure 8.  
Placing into Operation w/Dough Hook  
Make sure that the power unit is on a  
smooth, clean, suitable work surface and  
switched to off position, “O/Off.” Unwind the  
electrical cord to the necessary length and  
plug into a convenient outlet. The mixing  
bowl with dough hook is now ready for  
operation. See table 1 for examples  
demonstrating the use of dough hook  
attachment. Sample recipes may also be  
found in recipes section, at the back of this  
manual.  
Standard  
Professional  
Dough Hook  
Dough Hook  
Figure 7.  
How to Use Twin Beating Whisks  
All Bosch Concept Series Kitchen  
Machines come with a twin beating whisk  
assembly, see figure 4c.  
4. Place the anti-splash cover on the bowl  
so that the tabs on the bowl fit into the  
recesses in the bowl cover and turn the  
cover counterclockwise to fasten the  
bowl cover to the bowl. See figure 8a.  
The twin beating whisks and mixing bowl  
are intended to be used for very light  
substances, such as cream, egg whites,  
sauces, batters and light pastry doughs  
that are thin enough to pour.  
The cover has an integral filling funnel  
with a cap. The funnel cap may be  
removed to add ingredients (see figure  
11  
OPERATION WITH DOUGH HOOK AND WHISK ASSEMBLY  
Below you will find a table listing examples of how the dough hook and the whisk  
assembly are to be used for various typical applications.  
Attachment Ingredients  
Speed Time  
Max.  
Amount  
Twin Beating  
Whisks  
Egg Whites (2)  
4
2 min.  
(approx.)  
20 eggs  
(approx.)  
Whipping Cream  
3
2 min.  
6 cups  
(approx.)  
Sponge Cake (any recipe)  
Combine all ingredients  
Whip  
1
4
3x basic  
recipe  
(6 layers)  
1/2 min.  
4-6 min.  
Fold in flour mixture  
Mix  
M
(pulse)  
4
3 min  
(approx.)  
Basic Cake Batter  
Combine all ingredients  
1
4
1/2 min.  
3 min.  
3x basic  
recipe  
(6 layers)  
Mix  
Twin Beating  
Whisks/Dough  
Hook  
Cookie Dough  
Cream, soft butter or shortening  
and sugar using twin  
beating whisks  
Combine flour alternately with  
liquid using dough hook  
Stir in nuts, chocolate chips,  
etc. using dough hook.  
1
1/2 min.  
3x basic  
recipe  
(9 dozen  
cookies)  
4
3 min.  
(approx.)  
2 or 3  
Dough Hook  
Yeast Dough  
Combine all wet ingredients  
Add flour in portions  
1
1/2 min.  
5 min.  
3x basic  
recipe  
1 or 2  
(approx.)  
(10, 1 lb.  
loaves)  
Table 1. Examples of operation using whisk assembly and dough hook. Speed 1 should  
be used for initial stirring and combining. Place all ingredients into the mixing bowl, liquids  
first. Shortening must be soft (room temperature).  
12  
The driveshaft should also be removed  
from the mixing bowl for cleaning, if it  
has not already been done. See  
previous section, covering mixing bowl  
and dough hook, for instructions on how  
to remove driveshaft.  
The dough hook should be used for all  
heavier substances such as cookie doughs,  
yeast doughs, pastry doughs and other  
heavy doughs.The dough hook should  
always be used when adding nuts,  
chocolate chips, dried fruits, hard butter or  
other fats, hardened brown sugar, etc. to a  
mixture.  
2. If you have not already done so, remove  
the motor drive cover and place the  
mixing bowl on the mono drive of the  
power unit and turn the bowl counter-  
clockwise with a slight downward  
pressure until bowl is firmly seated on  
the mono drive coupling, see figure 4.  
Use of mixing bowl with twin beating whisks  
Before beginning to attach this or any other  
attachment, make sure that the power unit  
is on a smooth, clean, suitable surface and  
switched to off position, “O/Off,” and that  
you have removed the motor drive cover.  
CAUTION  
1. Before using the mixing bowl and twin  
beating whisk assembly for the first  
time, it is recommended that the bowl,  
anti-splash cover, filling funnel cap and  
twin beating whisk assembly be  
washed. All components of the mixing  
bowl and the twin beating whisk  
assembly are dishwasher safe, except  
the whisk holder.  
Failure to make sure that the bowl is  
properly seated on the mono drive coupling  
before the power unit is turned on can result  
in damage to the bowl and/or coupling.  
3. Place and engage the twin beating  
whisk assembly on the driveshaft of the  
mixing bowl as shown in figure 10a.  
a.  
b.  
The whisks may be removed from the  
whisk holder as shown in figure 9a, and  
washed in the dishwasher along with  
the mixing bowl and other components.  
The whisk holder should be washed in  
warm soapy water. After washing, rinse  
well and dry the whisk holder before  
reattaching the whisks as shown in  
figure 9b.  
Figure 10.  
a.  
b.  
4. Place the anti-splash cover on the bowl  
so that the tabs on the bowl fit into the  
recesses in the cover, and turn the anti-  
splash cover counterclockwise to  
fasten the bowl cover to the bowl.  
See figure 10b.  
The anti-splash cover has an integral filling  
funnel with a cap. The cap may be removed  
Figure 9.  
13  
to add ingredients, but the cover and cap  
should be in place whenever the power unit  
is in operation. The anti-splash cover and  
cap serve to prevent the escape of flour dust  
at the beginning of the stirring process as  
well as prevent splatter, and also serves to  
prevent accidental contact with the moving  
whisks.  
Removing Contents  
Before beginning to remove the contents  
from the mixing bowl, make sure that the  
power unit has been turned to off position,  
“O/Off.” Remove the anti-splash cover by  
turning the cover clockwise and lifting off.  
Once the cover has been removed, the  
dough hook or the twin beating whisks may  
be removed by turning the hook or whisk  
assembly clockwise while lifting.  
Placing into Operation w/Twin Beating  
Whisks  
Make sure that the switch is in the off  
position, “O/Off.” Unwind the electrical cord  
to the necessary length and plug into the  
wall outlet. The bowl with whisk assembly  
is now ready for operation. See table 1 for  
examples demonstrating the use of the twin  
beating whisks.  
The mixing bowl can be removed from the  
power unit by turning the bowl clockwise  
while lifting.  
The contents may now be used as desired.  
Care and Cleaning  
Mixing bowl tips:  
of Bowl and Its Accessories  
The mixing bowl, twin beating whisks  
(except for the whisk holder), dough hook  
anti-splash cover, filling funnel cap, and bowl,  
either the stainless steel bowl or plastic  
bowl, are dishwasher safe.  
1. When using the mixing bowl to knead  
or mix a recipe designed to be  
prepared by hand, you will find that with  
the Bosch Kitchen Machine you can  
usually place all the ingredients in the  
mixing bowl at once. When doing this,  
always place the liquids in first. This  
will assure more thorough mixing.  
To facilitate cleaning:  
> The driveshaft should be removed  
from the mixing bowl, see figure 5;  
and  
> The whisks should be removed from  
the whisk holder, see figure 9a.  
2. When adding ingredients to a mixture:  
a. Turn the rotary switch to a lower  
speed;  
It is recommended that the whisk holder  
be washed by hand in warm soapy water,  
rinsed well and dried after each use.  
b. Remove the cap from the filling  
funnel;  
c. Add the ingredients through the  
funnel opening and replace the cap.  
The power unit of the kitchen machine  
should be cleaned using a clean, damp  
cloth only. Never use coarse or caustic  
cleaning products to clean this appliance.  
Never immerse the power unit in water.  
3. If a large batch of dough is to be left in  
the mixing bowl and allowed to rise, the  
cover should be removed and placed  
only loosely on the bowl so that it is  
free to move if the dough should begin  
to press on it.  
14  
Blender with Unbreakable Plastic Jar  
(MUZ 7 MX1)  
How to Use Blender  
Either this plastic blender or the stainless  
steel blender are available as accessory  
items under the part numbers:  
MUZ 7 MX1  
WARNING  
1. There is a risk of injury from sharp  
blades when using the blender  
attachment.  
2. Keep hands and utensils out of the  
blender jar while it is attached to the  
power unit.  
for blender with polycarbonate jar;  
or  
MUZ 7 MX3  
for blender with stainless steel jar.  
3. Blades are sharp. Handle carefully.  
4. To avoid injury, never place blade  
assembly on power unit without  
blender jar properly attached.  
5. Always operate the blender with the  
cover in place.  
6. The use of attachments, including  
canning jars, not recommended by  
the manufacturer, may cause a risk  
of personal injury.  
7. When blending hot and/or frothing  
liquids, process a maximum of 18 fluid  
ounces (0.5 litres) at a time.  
The blender has been designed for crushing  
ice; mixing liquids; pureeing vegetables;  
preparing special diet and infant foods;  
pulverizing fruit, vegetables, nuts and dried  
bread (for bread crumbs); and preparing  
mayonnaise and sauces.  
Before beginning to use this or any other  
attachment, make sure that the power unit  
is on a clean, smooth, suitable work  
surface and switched to off position, “O/Off,”  
and that you have removed the motor drive  
cover.  
The MUM 7100 UC, MUM 7150 UC and the  
MUM 7220 UC Bosch Concept Series  
Kitchen Machines include the MUZ 7 MX1  
blender accessory. The blender accessory  
consists of, figure 11:  
1. Before using the blender for the first  
time, it is recommended that the  
blender jar cover, closure/funnel and  
blade/base assembly be washed. All  
components, except the blade/base  
assembly, are dishwasher safe.  
Remove the blade/base assembly from  
the blender, see figure 12.  
CAUTION  
Blade/base assembly is very sharp.  
Handle with care.  
The blade/base assembly may be  
easily removed, as shown in figure 12a,  
by inverting the blender and pressing  
down on the quick release handle and  
turning it counterclockwise until it  
stops and then lifting up.  
Figure 11.  
11a. Cover closure/funnel  
11b. Cover  
11c. Blender jar  
11d. Blade/base assembly.  
15  
Normally when blending, the blender jar  
should be filled with the entire amount of  
material to be blended, if possible, before  
switching the appliance on. The cover and  
cover closure should always be in place after  
filling the blender jar and before switching  
the power unit to On. Any subsequent  
additions to the blended material should be  
made through the cover opening, see figure  
14. For solids and/or granular material,  
remove the cover closure/funnel to add the  
material, as shown in figure 14a. For liquids,  
the closure/funnel may be left in place and  
the liquids added by pouring it into the  
closure/funnel, see figure 14b.  
a.  
b.  
Figure 12.  
Wash the blade/base assembly under  
running water. Do not place the blade/  
base assembly in the dishwasher or  
allow it to stand in water. This will tend  
to wash out the lubricant. After  
cleaning, rinse thoroughly and dry  
before using.  
2. To assemble or reassemble blade/base  
assembly into the blender, insert the  
blade/base assembly into the blender  
jar as shown in figure 12b, press  
down on the quick release handle of  
the blade/base assembly and turn  
clockwise to the stop. The blade/base  
assembly is then back in place.  
Figure 14.  
Example of Use of Blender  
To familiarize you with the operation of the  
blender, a sample recipe for mayonnaise is  
provided below:  
3. If you have not already done so, remove  
the motor drive cover and place the  
blender on the mono drive and turn  
counterclockwise to lock the blender  
in place.  
Mayonnaise Recipe  
1
whole egg  
1/3 cup of vegetable oil  
a.  
b.  
2
tablespoons lemon juice or light  
vinegar  
1
teaspoon sugar  
1/2 teaspoon dry mustard  
1/2 teaspoon of salt  
2/3 cup of vegetable oil  
Mix all ingredients, except final 2/3’s cup  
of oil, for a few seconds at speed 1, then  
quickly pour the oil in through the opening  
in the cover in a uniformly thick stream, as  
shown in figure 14b. Operate the blender at  
speeds 1 or 4 until mixture is thick and  
smooth (approximately 10-20 seconds).  
Makes 1 1/4 cups.  
Figure 13.  
Placing Blender into Operation  
Make sure that the switch is in the off  
position, “O/Off.” Unwind the electrical cord  
to the necessary length and plug into wall  
outlet. The blender is now ready for  
operation.  
16  
Tips:  
The power unit of the kitchen machine  
should be cleaned with a clean, damp cloth  
only. Never use coarse or caustic cleaning  
products to clean this appliance. Never  
immerse the power unit in water.  
The blender should be operated with careful  
consideration as to what is required and/or  
desired. The speed at which the blender is  
operated and the length of operation for a  
given job will depend upon the degree of  
fineness desired or the amount being  
blended.  
Slicer/Shredder, w/Unbreakable Bowl  
(MUZ 7 TS1)  
When the blender is being used on dry  
materials, such as nuts or dry bread, the  
best results will be obtained when the  
blender jar is filled with approximately 1/2  
cup of material to be blended.  
WARNING  
1. Blades on discs are sharp. Handle  
carefully. Do not grip the discs by the  
blades.  
2. When operating slicer/shredder keep  
hands clear of filling tube. Only work  
with pusher.  
3. Always operate the slicer/shredder with  
the cover in place.  
If the blender does not start (even after trying  
the highest speed) after having switched it  
On and the control status indicator is  
flashing, the blade has become blocked by  
the contents. The power unit should be:  
1. Switched to off, “0/Off,” and unplugged.  
2. The mixture should be removed and the  
contents at the bottom of the jar  
loosened.  
The MUM 7220 UC Bosch Concept Series  
Kitchen Machine includes the MUZ 7 TS1  
slicer/shredder attachment. The slicer/  
shredder attachment consists of, figure 15:  
Removing Contents  
Before beginning to remove the contents  
from the blender, make sure that the power  
unit has been turned to off position “O/Off”.  
Remove the blender from the power unit by  
turning the blender to the clockwise while  
lifting. With the blender removed from the  
power unit, the contents of the blender may  
now be poured into a suitable container or  
bowl, as desired.  
a. Cover closure/pusher  
b. Cover  
c. Unbreakable 12-cup capacity bowl  
d. Driveshaft  
e. 3 slicer/shredder discs:  
• reversible slicing disc  
• reversible shredding disc  
• grating disc  
f. disc holder  
g. stabilizing pin  
Care and Cleaning of Blender  
All components of the blender, except the  
blade/base assembly, are dishwasher safe.  
It is recommended that the blade/base  
assembly be cleaned only under flowing  
water rather than in the dishwasher. Soap  
and detergent will tend to wash out the  
bearing lubricant of the blade/base  
assembly. Do not use scouring cleaners on  
any of the blender parts.  
17  
Figure 15.  
Slicer/shredder, intended use  
WARNING  
The blades on the discs are very sharp.  
Handle with care.  
The slicer/shredder attachment has been  
designed for slicing, shredding and/or  
grating of vegetables, as well slicing/  
shredding of soft cheeses and sausages  
or meat and grating of vegetables and hard  
cheese.  
All components of the slicer/shredder are  
dishwasher safe. The driveshaft can be  
removed for cleaning. After washing, rinse  
well and dry before using.  
Use of Slicer/Shredder  
2. To assemble the slicer/shredder:  
a. If the driveshaft is not presently  
inserted in the bowl, insert  
driveshaft as shown in figure 15.  
Before beginning to use this or any other  
attachment, make sure that the power unit  
is on a smooth, clean, suitable work  
surface and switched to Off position,  
“O/Off,” and that you have removed the  
motor drive cover.  
b. Place slicer/shredder bowl on  
power unit by placing over mono  
drive and while pressing down turn  
it counterclockwise to stop and  
lock the bowl in place, see figure  
16a.  
1. Before using the slicer/shredder for the  
first time, it is recommended that the  
bowl, driveshaft, cover, closure/pusher,  
discs, disc holder and stabilizing pin  
be washed.  
c. Select disc to be used and place  
on disc holder and place over  
driveshaft, see figure 16b.  
18  
2. For short or circular slices, place food  
in the feeding tube on end. For  
example, If you wish to have circular  
slices of zucchini or carrots:  
b.  
• cut to length not to extend above the  
top of the feeding tube.  
• place the cut zucchini or carrots in  
the feeding tube on end until the  
feeding tube is packed.  
a.  
Figure 16.  
To slice a single narrow item, a carrot for  
example:  
• place the carrot in the feeding funnel  
opposite the cutting edge of the disc.  
d. If stabilizing pin is not in cover,  
insert pin, see 15e. Then place  
cover on bowl, making sure the tabs  
on the cover enter the recesses in  
the bowl, and turn counterclockwise  
to stop, see figure 17.  
The wall of the feeding funnel will then serve  
to hold the piece vertical.  
When using the slicer/shredder be sure to  
watch the level in the bowl and stop the  
slicing, shredding or grating before the level  
of the material being sliced, shredded or  
grated reaches the level of the disc holder.  
Slicer/shredder tips:  
1. Shopping for fruits and vegetables that  
will fit into the feeding funnel will simplify  
food preparation.  
Figure 17.  
Placing Slicer/Shredder into Operation  
Make sure the power unit is on a smooth,  
clean, suitable work surface and switched  
to the Off position, “O/Off.” Unwind the  
electrical cord to the necessary length and  
plug into a convenient outlet. The slicer/  
shredder is now ready for use.  
2. Foods that are to be used together may  
be sliced together. This can be used to  
your advantage. For example, green  
onions and celery are often used  
together, but feeding the green onions  
into the feeding funnel alone is difficult.  
Try slicing the green onions at the same  
time as the celery by interspersing  
them in the feeding funnel with the  
celery.  
Place items to be sliced, shredded or  
grated in feeding funnel and be sure to use  
the pusher to feed items into the discs when  
in operation.  
3. Use the slicing disc to shred lettuce.  
Learning how to feed food properly into the  
feed funnel is the most important factor for  
proper slicing and grating:  
1. For long slices or long shreds, place  
food into the feeding funnel lengthwise.  
4. Do not overcook potatoes that are to  
be sliced. Also it is recommended that  
you let them cool first. Potatoes must  
be cool and firm to obtain the regular  
slices.  
19  
Food Processor with Unbreakable Bowl  
(MUZ 7 MM2)  
If the slicer/shredder does not start (even  
after trying the highest speed) and the  
indicator above the rotary dial is flashing:  
the disc has become blocked by the  
contents. The power unit should be:  
WARNING  
1. There is a risk of injury from sharp  
blades when using the food processor  
accessory.  
2. Blades are sharp. Handle carefully.  
3. Always operate the food processor  
accessory properly assembled with  
the cover in place.  
1. Switched to Off position, “O/Off,” and  
unplugged.  
2. The top cover should be removed and  
the items causing the blockage  
removed.  
The MUM 7150 UC Bosch Concept Series  
Kitchen Machine includes the MUZ 7 MM2  
food processor accessory. The food  
processor accessory consists of, figure 18:  
Removing Contents  
Before beginning to remove the contents  
from the slicer/shredder, make sure that the  
power unit has been turned to the Off  
position, “O/Off.” Remove the slicer/  
shredder from the power unit by turning the  
slicer/shredder bowl clockwise while lifting.  
With the slicer/shredder removed from the  
power unit, remove the top cover, by turning  
it clockwise while lifting. Next lift the disc  
holder and disc out of the bowl by grasping  
the knob of the disc holder that is protruding  
through the center of the disc. The contents  
of the slicer/shredder may now be poured  
into a suitable container or bowl, as desired.  
Care and Cleaning  
of Slicer/Shredder  
All components of the slicer/shredder are  
dishwasher safe. It is recommended that  
the driveshaft be removed prior to placing  
the bowl in the dishwasher. Do not use  
scouring cleaners on any of the slicer/  
shredder parts.  
Figure 18.  
The power unit of the kitchen machine  
should be cleaned with a clean, damp cloth  
only. Never use coarse or caustic cleaning  
products to clean this appliance. Never  
immerse the power unit in water.  
18a. 5-cup capacity bowl with cover and  
pusher/measuring cup.  
18b. food processor blade  
18c. 3 discs  
• reversible slicing disc  
• reversible shredding disc  
• grating disc  
18d. disc holder  
20  
How to Use the Food Processor Blade  
The food processor blade and its bowl are  
intended to be used for mincing, pureeing  
and pulverizing of fruit, vegetables, meat,  
nuts and dried bread (for bread crumbs) and  
the preparation of sauces, special diet and  
infant foods and mixing.  
Note: The processor blade should not be  
used to process hard cheeses  
(Parmesan, Romano, etc.)  
Figure 19.  
4. Food to be processed may be placed  
Use of 5-cup capacity bowl with food  
processor blade  
in the bowl now or added after the bowl  
cover has been put in place.  
Before beginning to attach this or any other  
attachment, make sure that the power unit  
is on a smooth, clean, suitable work surface  
and switched to the Off position, “O/Off,” and  
thatyou have removed the motor drive cover.  
5. Place the cover on the bowl, as shown  
in figure 20a. There is a safety  
interlock in the handle of the 5-cup  
capacity bowl that is engaged by the  
cover. Push up on the interlock button  
(step 1) and turn the cover (step 2)  
counterclockwise until stop and  
interlock is engaged.  
1. Before using the food processor for  
the first time, it is recommended that  
the bowl, bowl cover, pusher/  
measuring cup and food processor  
blade be washed. All components of  
the food processor attachment are  
dishwasher safe. Or they may be  
washed in warm soapy water. After  
washing, rinse well and dry before  
using.  
2. If you have not already done so,  
remove the motor drive cover from the  
power unit’s mono drive and place the  
bowl on the mono drive of the power  
unit and turn the bowl counter-  
clockwise with a slight downward  
pressure until the bowl is firmly seated  
on the drive coupling, see figure 19a.  
Figure 20.  
Note: The processor blade will not turn  
when the power unit is started  
unless the cover has properly  
engaged the interlock. This is a  
special safety feature of the food  
processor bowl.  
3. Grasping the processor blade by the  
knob at the top of the center column,  
lift it up and place it over the center  
column of the bowl, see figure 19b.  
Once in place, check to make sure  
that the blade has engaged the  
driveshaft by turning the blade slightly  
clockwise.  
The cover has an integral feeding funnel  
with a pusher/measuring cup. The  
pusher/measuring cup may be  
removed to add ingredients, but the  
cover and pusher must be in place  
whenever the power unit is in operation.  
21  
• Almonds, nuts  
Placing into Operation  
Place nuts approximately 1/4 pound at a  
time (100 g.) into the bowl dry. Use speed  
4 for approximately 1 - 1 1/2 minutes.  
with Food Processor Blade  
Make sure that the power unit is on a  
smooth, clean, suitable work surface and  
switched to the Off, “O/Off,” position. Unwind  
the electrical cord to the necessary length  
and plug into a convenient outlet. The 5-cup  
capacity bowl with food processor blade is  
now ready for operation.  
• Meat  
Do not process more than 3/4 of a pound  
at a time (375 g.). Remove the bones,  
gristle and tendons and cut meat into  
pieces suitable to fit through the feeding  
tube.  
The processor blade sits low in the bowl,  
near the bottom. Food to be processed must  
be fed through the feeding funnel using the  
pusher. The food is then minced or pureed  
near the bottom of the bowl by the spinning  
blade. Food should be prepared as usual  
(wash, dry, peel, etc.) and cut into pieces  
to readily fit through the feeding funnel.  
Note: Before processing, spices or bread  
maybe added as called for in your recipe.  
Use speed 4, or “M,” until desired result  
is obtained (approximately 30 - 60  
seconds).  
• Pureeing  
The degree of mincing desired, to a great  
extent, depends upon the intended purpose  
and the individual taste of the preparer, so  
the times listed below in the examples  
should be taken as a general guide only.  
Also, the processing times depend upon  
the quantity of food being processed; that  
is, for small quantities and/or coarser result,  
use a shorter operating time, for larger  
quantities and/or finer result, use a longer  
operating time.  
Fruits, vegetables and cheeses with  
ingredients and spices may also be  
processed. Do not process more than  
3/4 of a pound at a time (375 g.). Use  
speed 4 or “M” until desired result is  
obtained (approx. 1 minute).  
• Mayonnaise  
Using the recipe from the blender section,  
place ingredients into the food processor  
bowl, except the final 2/3 cup of vegetable  
oil. Mix all the ingredients briefly, then  
add the rest of the vegetable oil. Use  
speed for approximately 1 1/2 minutes.  
Examples of Use of Food Processor  
To familiarize you with the operation of the  
food processor, below you will find some  
typical uses:  
• Herbs (except chives)  
Place herbs, up to an amount of  
approximately 1 tablespoon (10 g.) into  
the bowl dry. Use speed 4, or “M,” the  
momentary “pulse” position, for 20-30  
seconds.  
• Onions or Garlic  
Cut onions into quarters. Processing  
approximately 1/4 pound at a time  
(100 g.) use “M,” briefly (5-7 seconds)  
until desired consistency is obtained.  
Figure 21.  
22  
The disc holder, three discs and its 5-cup  
capacity bowl are intended to be used for  
slicing, shredding and/or grating of  
vegetables, as well slicing/shredding of soft  
cheeses and sausages or meat and grating  
of vegetables and hard cheeses.  
Removing Contents  
Before beginning to remove the contents  
from the food processor, make sure that the  
power unit has been turned to the Off  
position, “O/Off.” Remove the top cover from  
the bowl by depressing the interlock button  
on the handle, step 1, and turning the cover  
clockwise, step 2, while lifting, see figure  
21a. With the cover removed the bowl can  
be removed from the power unit by turning  
it clockwise while lifting, see figure 21b.  
The contents of the bowl may now be  
poured into a suitable container or bowl, as  
desired. Be sure to hold the processor blade  
in the bowl by placing a finger on the top of  
the processor blade’s center column while  
pouring.  
Use of disc holder and discs  
Before beginning to attach this or any other  
attachment, make sure that the power unit  
is on a smooth, clean, suitable work surface  
and switched to the Off position, “O/Off,” and  
thatyou have removed the motor drive cover.  
1. Before using the bowl with the disc  
holder and discs for the first time, it is  
recommended that the bowl, bowl  
cover, pusher/measuring cup, disc  
holder and discs be washed. All  
components of the food processor  
attachment are dishwasher safe. Or  
they may be washed in warm soapy  
water. After washing, rinse well and  
dry before using.  
Next lift the processor blade out of the bowl  
by grasping the knob of the center column  
of the processor blade and lifting.  
CAUTION  
Processor blade is very sharp.  
Handle with care.  
2. If you have not already done so,  
remove the motor drive cover from the  
power unit’s mono drive and place the  
bowl on the mono drive of the power  
unit and turn the bowl counter-  
clockwise with a slight downward  
pressure until the bowl is firmly seated  
on the drive coupling, see figure 19a.  
Care and Cleaning  
of Food Processor Blade and Bowl  
All components of the food processor are  
dishwasher safe. Do not use scouring  
cleaners on any of the food processor parts.  
3. Select disc to be used and place on  
disc holder and place over driveshaft,  
see figure 22a.  
The power unit of the kitchen machine  
should be cleaned with a clean, damp cloth  
only. Never use coarse or caustic cleaning  
products to clean this appliance. Never  
immerse the power unit in water.  
How to Use Discs w/5-Cup Capacity Bowl  
The food processor attachment provided with  
the MUM 7150 UC Bosch Concept Series  
Kitchen Machine also has a disc holder with  
3 discs, in addition to the processor blade,  
see figure 18.  
Figure 22.  
23  
Removing Contents  
4. Place the cover on the bowl, as shown  
in figure 22b. There is a safety  
interlock in the handle of the 5-cup  
capacity bowl that is engaged by the  
cover. Push up on the interlock button,  
step 1, and turn the cover, step 2,  
counterclockwise until it stops and  
the interlock is engaged.  
Before beginning to remove the contents  
from the 5-cup capacity food processor bowl,  
make sure that the power unit has been  
turned to the Off position, “O/Off.” Remove  
the top cover from the bowl by depressing  
the interlock button on the handle, step 1,  
and turning the cover clockwise, step 2,  
while lifting, see figure 21a. With the cover  
removed the bowl can be removed from the  
power unit by turning it clockwise while  
lifting, see figure 21b. Next lift the disc holder  
and disc out of the bowl by grasping the  
knob of the disc holder that is protruding  
through the center of the disc.  
Note: The disc and disc holder will not  
turn when the power unit is started  
unless the cover has properly  
engaged the interlock. This is a  
special safety feature of the food  
processor bowl.  
The cover has an integral feeding funnel  
with a pusher/measuring cup. The  
pusher/measuring cup may be  
removed to add ingredients, but the  
cover and pusher must be in place  
whenever the power unit is in operation.  
CAUTION  
Blades on discs are very sharp.  
Handle with care.  
Placing into Operation with Discs  
Make sure the power unit is on a smooth,  
clean, suitable work surface and switched  
to the Off position, “O/Off.” Unwind the  
electrical cord to the necessary length and  
plug into a convenient outlet. The 5-cup  
capacity food processor bowl is now ready  
for use with the disc you have selected.  
The contents of the bowl may now be  
poured into a suitable container or bowl, as  
desired.  
Care and Cleaning  
Place items to be sliced, shredded or grated  
in feeding funnel and be sure to use the  
pusher to feed items into the discs when in  
operation.  
of Discs, Disc Holder and Bowl  
All components of the food processor are  
dishwasher safe. Do not use scouring  
cleaners on any of the slicer/shredder parts.  
Refer to Slicer/Shredder section of this  
manual, page19, for examples and tips on  
how the discs may be used for slicing,  
shredding and grating.  
The power unit of the kitchen machine  
should be cleaned with a clean, damp cloth  
only. Never use coarse or caustic cleaning  
products to clean this appliance. Never  
immerse the power unit in water.  
Just as when using the slicer/shredder, be  
sure to watch the level in the bowl and stop  
the slicing, shredding or grating before the  
level of the material being sliced, shredded  
or grated reaches the level of the disc  
holder.  
24  
Service and Repair  
TROUBLESHOOTING  
The Bosch Concept Series Kitchen  
Machines require no special care other than  
the care and cleaning noted in this manual.  
If you are having a problem with your  
machine, before calling our Customer  
Support group, please refer to the  
TROUBLESHOOTING section below. If after  
reviewing the troubleshooting section and  
trying its remedies you are still having a  
problem, please do contact us by either  
writing to us at:  
Problem Possible Cause and Remedy  
Status  
A circuit breaker may have  
Indicator tripped or a fuse has blown in  
Off  
power supply circuit. Reset  
circuit breaker or replace  
fuse.  
Status  
Power supply to the power  
Indicator unit has been interrupted and  
Flashing become reestablished (there  
was a temporary power  
outage).  
Bosch Small Appliances  
Customer Support  
BSH Home Appliances  
5551 McFadden Avenue  
Huntington Beach, CA 92649  
1. Turn the power unit to Off  
and wait 5 seconds.  
2. Restart.  
Status  
The power unit has been  
or e-mailing us at:  
or calling us at:  
Indicator overloaded; for example, the  
Flashing blender blade may have  
become blocked.  
1. Turn the power unit to Off  
and unplug.  
1 (866) 44BOSCH  
[1 (866) 442-6724]  
2. Remove contents of  
attachment being used  
and loosen whatever has  
caused the jam.  
If you do write to us, please include your  
e-mail address or a daytime telephone  
number where you may be reached.  
3. Reinstall attachment and  
restart.  
Also, to view our full product line, please  
visit our Web site:  
25  
Sample Recipes  
Salsa  
Fruit Smoothies  
2
2
1/2  
1
1 - 2  
1
cups fruit juice  
cups frozen fruit  
can frozen juice concentrate  
cup fruit flavored yogurt  
cups of ice  
Chop the following ingredients in Bosch  
blender or food processor, on speed 3 or 4:  
1 - 4  
Dried Arabol Chilies  
(start with one, add more for  
increased spiciness)  
clove garlic  
fresh banana  
1
Place all ingredients in Bosch blender and  
mix until smooth, on speed 3 or 4.  
Experiment with different flavor combinations  
such as tropical, berry or melon.  
1/8  
8
cup water  
ounces tomato sauce (add  
half)  
Next add:  
1 & 1/2 teaspoons oregano  
3/4  
1
1
teaspoons cumin  
bunch of fresh cilantro  
pinch of salt  
French Bread  
second half of tomato sauce  
4
4
6
2
1
tablespoons active dry yeast  
cups hot water  
tablespoons sugar  
tablespoons salt  
Blend all ingredients, on speed 1 or 2, until  
smooth.  
cup vegetable oil  
10 -12 cups of flour (white or wheat)  
tablespoons gluten  
Pesto  
4
1
cup loosely packed basil  
leaves  
cup grated parmsean  
Place all ingredients in Bosch mixing bowl.  
Thoroughly knead on speed 1 or 2 (8 - 10  
minutes). Let rise in the bowl 10 minutes,  
then punch down. Punch down 4 or 5 times.  
Divide into 3 - 4 regular loaf pans or shape  
into rounds. Slash tops with sharp knife and  
brush with egg wash. Let raise until doubled  
in size. Bake 30 minutes at 400 °F.  
1/2  
1/3-1/2 cup olive oil (enough for  
desiredconsistency)  
1 - 2  
1/4  
cloves garlic  
cup shelled pinenuts  
Lightly toast pinenuts. Let cool. Place olive  
oil in Bosch blender or food processor. Turn  
on power and gradually add parmesan  
cheese, garlic and basil leaves. Process,  
on speed 1 or 2, until smooth. Add pinenuts  
and blend thoroughly.  
Toss with cooked pasta or spread on bread  
or crackers.  
26  
Oatmeal  
Cookies  
Chocolate  
Chip  
2
1
2
1
cups packed brown sugar  
cup shortening  
eggs  
teaspoon vanilla  
1 - 3/4 cups flour  
1
teaspoon baking soda  
1/2  
3
1
teaspoon salt  
cups quick-cooking rolled oats  
cup chocolate chips  
Cream the brown sugar, shortening, eggs  
and vanilla in the mixing bowl, on speed 1  
or 2. Add flour, baking soda and salt. Blend  
well, stir in rolled oats and chocolate chips  
by hand. Drop by spoonfuls onto greased  
baking sheets. Bake in 350 °F oven for 8 -  
10 minutes. Cool before removing from pan.  
Makes 5 dozen.  
Acknowledgement:  
The sample recipes listed bove were sub-  
mitted by:  
Salsa - Caroline Ciarelli, BSH Home  
Appliances  
Pesto - Kitchen Resource  
Fruit Smoothies - Marni Rader, BSH  
Appliances  
French Bread - Kitchen Resource  
Oatmeal Chocolate Chip Cookies -  
Kitchen Resource.  
27  
Important Notes  
28  
Important Notes  
29  
SPECIAL ACCESSORIES  
30  
BOSCH Small Appliance Warranty  
BSH Home Appliances (“BOSCH”) warrants all new small appliances to be free from original  
defects in design, materials and workmanship for one (1) year after the sale to the original  
owner.  
Within the stated warranty period, BOSCH will repair or replace, at its sole option, any  
small appliance or parts thereof which prove defective under the conditions of normal use  
and service at no charge to you. It is the owner’s responsibility to return the appliance for  
repair. Repaired and replacement small appliances and parts shall be the same or as  
close in appearance as possible to the original for the purposes of this warranty.  
Should you require service of your BOSCH small appliance, please contact customer  
service at 1-866-44-BOSCH. Repair of BOSCH appliances should only be performed by  
qualified technicians.  
This warranty is limited to the original consumer purchase and is not transferable. Specifically  
excluded from this warranty are failures caused by accident, misuse, neglect, abuse,  
including tampering, use of frequency or voltage other than marked on the product, and  
use for commercial purposes.  
To the extent allowed by law, this warranty sets out your exclusive remedies, whether for  
negligence or otherwise. BOSCH will not be liable for any consequential or incidental  
damages, losses or expenses. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESSED  
WARRANTIES. ANY WARRANTY IMPLIED BY LAW, WHETHER FOR  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE,  
SHALL BE EFFECTIVE ONLY FOR THE PERIOD THAT THIS EXPRESSED WARRANTY  
IS EFFECTIVE. BOSCH DOES NOT ASSUME ANY RESPONSIBILITY FOR INCIDENTAL  
OR CONSEQUENTIAL DAMAGES.  
No attempt to alter, modify or amend this warranty shall be effective unless authorized in  
writing by an officer of BOSCH. Some states do not allow limitations on how long implied  
warranties last or the exclusion or limitation of incidental or consequential damages, so  
the foregoing limitations and exclusions may not apply to you. This warranty gives you  
specific legal rights and you may also have other rights which vary from state to state.  
31  
Looking for more information about BOSCH products?  
Visit our Web site:  
32  

Alpine mrpf200 User Manual
Audiovox LCM1331FD User Manual
Bunn TDO 4T TDO 5 User Manual
Citizen Calculator SLD 336 User Manual
Crown Boiler JSI138 User Manual
Directed Electronics 600d User Manual
Dual Car Amplifier DA301L User Manual
Hypertec 5702 User Manual
JVC CS WDS1 User Manual
JVC GR D320EK User Manual