MULTIFUNCTIONAL DIGITAL SYSTEMS
Troubleshooting Guide
Preface
Thank you for purchasing TOSHIBA Multifunctional Digital Systems. This manual describes how to troubleshoot the
problems that could occur while you are using the equipment. Keep this manual within easy reach, and use it to configure
an environment that makes the best use of the e-STUDIO’s functions.
This equipment provides the scanning function as an option. However, this optional scanning function is already installed in some
models.
„ How to read this manual
‰ Symbols in this manual
In this manual, some important items are described with the symbols shown below. Be sure to read these items before
using this equipment.
Indicates a potentially hazardous situation which, if not avoided, could result in death, serious
injury, or serious damage, or fire in the equipment or surrounding objects.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate
injury, partial damage to the equipment or surrounding objects, or loss of data.
Indicates information to which you should pay attention when operating the equipment.
Other than the above, this manual also describes information that may be useful for the operation of this equipment with
the following signage:
Describes handy information that is useful to know when operating the equipment.
Pages describing items related to what you are currently doing. See these pages as required.
‰ Screens
y Screens on this manual may differ from the actual ones depending on how the equipment is used, such as the status
of the installed options.
y The illustration screens used in this manual are for paper in the A/B format. If you use paper in the LT format, the
display or the order of buttons in the illustrations may differ from that of your equipment.
‰ Trademarks
y The official name of Windows 2000 is Microsoft Windows 2000 Operating System.
y The official name of Windows XP is Microsoft Windows XP Operating System.
y The official name of Windows Vista is Microsoft Windows Vista Operating System.
y The official name of Windows 7 is Microsoft Windows 7 Operating System.
y The official name of Windows Server 2003 is Microsoft Windows Server 2003 Operating System.
y The official name of Windows Server 2008 is Microsoft Windows Server 2008 Operating System.
y Microsoft, Windows, Windows NT, and the brand names and product names of other Microsoft products are
trademarks of Microsoft Corporation in the US and other countries.
y Apple, AppleTalk, Macintosh, Mac, Mac OS, Safari and TrueType are trademarks of Apple Inc. in the US and other
countries.
y Adobe, Adobe Acrobat, Adobe Reader, Adobe Acrobat Reader, and PostScript are trademarks of Adobe Systems
Incorporated.
y Mozilla, Firefox and the Firefox logo are trademarks or registered trademarks of Mozilla Foundation in the U.S. and
other countries.
y IBM, AT and AIX are trademarks of International Business Machines Corporation.
y NOVELL, NetWare, and NDS are trademarks of Novell, Inc.
y TopAccess is a trademark of Toshiba Tec Corporation.
y Other company names and product names in this manual are the trademarks of their respective companies.
Preface
1
CONTENTS
Clearing a Paper Jam............................................................................................................. 11
Locating a paper jam........................................................................................................... 11
Paper jam in the bypass tray............................................................................................... 17
Paper jam in the Job Separator and the Offset Tray (both optional)................................... 22
Paper jam in the Saddle Stitch Finisher MJ-1024 and the Hole Punch Unit MJ-6004 (both
optional) .............................................................................................................................. 28
Paper jam in the stapler unit of the Saddle Stitch Finisher MJ-1025 (optional)................... 34
Paper jam in the Hanging Finisher MJ-1031 (optional) ...................................................... 37
Clearing paper jams caused by a wrong paper size setting................................................ 38
Staple jam in the saddle stitch unit...................................................................................... 50
Replacing a “Near Empty” toner cartridge........................................................................... 57
Clearing print job errors....................................................................................................... 78
CONTENTS
3
Cannot print (port setting problems).................................................................................... 80
Retrieval of printer configuration failed................................................................................ 81
Client Problems ..................................................................................................................... 83
Startup page not printed...................................................................................................... 84
Scanning Problems................................................................................................................ 86
Locating the Equipment in the Network............................................................................... 92
Equipment does not respond to ping command.................................................................. 94
LDAP Search and Authentication Problems........................................................................ 95
Printing Problems (Network Related)................................................................................... 96
4
CONTENTS
Hardware Status Icons on TopAccess [Device] Tab......................................................... 104
Error codes on transmission and reception....................................................................... 112
General operations............................................................................................................ 120
CONTENTS
5
6
CONTENTS
1.
TROUBLESHOOTING FOR THE HARDWARE
This chapter describes how to troubleshoot problems with paper, toner and other finishing processes.
This chapter also describes how to supply the paper, toner and staples.
Locating a paper jam............................................................................................................................................11
Paper jam in the bypass tray................................................................................................................................17
Paper jam in the stapler unit of the Saddle Stitch Finisher MJ-1025 (optional)....................................................34
Clearing paper jams caused by a wrong paper size setting.................................................................................38
Clearing a Staple Jam............................................................................................................ 43
Replacing a “Near Empty” toner cartridge............................................................................................................57
Cleaning the Charger............................................................................................................. 69
1 TROUBLESHOOTING FOR THE HARDWARE
Messages Displayed on the Touch Panel
When a message appears on the touch panel, see the table below to solve the problem.
Message
Close *** cover.
Problem Description
Corrective Action
The cover indicated by *** is open.
Check the cover on the touch panel and close it.
Misfeed in ***
Paper jam has occurred inside the
equipment.
Remove the jammed paper following the guidance
displayed on the touch panel.
Check paper size setting on control
panel for drawer N
Paper jam has occurred because of
the mismatch between the paper size another paper jam. Be sure to correctly register the
Just removing the jammed paper does not prevent
placed in drawer N and the size
registered for the drawer N in the
equipment.
paper size in the equipment.
Wait (Performing Self-check)
The equipment is undergoing
maintenance to keep its imaging
quality.
Wait until the adjustment is completed and the
message disappears.
Check the original and set it again
The original is jammed inside of the
Reversing Automatic Document
Feeder (optional).
Remove the jammed original following the guidance
on the touch panel.
The direction or the size of the
original placed on the Reversing
Automatic Document Feeder is
incorrect.
Check the direction and the size of the original and
then replace it on the Reversing Automatic Document
Feeder. Then reattempt the operation.
Change direction of original
The orientation of the original placed
on the original glass is incorrect.
Change the orientation of the original by 90 degrees
and place it on the original glass.
Change from this mode
Count over, cannot store anymore
The number of originals to be
scanned has exceeded the limit
specified with the department or user
code during scanning.
Ask your administrator for details of setting the limit for
the number of copies.
READY (CHECK SADDLE STITCH
STAPLER)
Staple jam has occurred in the stapler Remove the jammed staples.
of the saddle stitch unit.
READY (CHECK SADDLE STITCH
STAPLER)
No staples are left in the stapler of the Refill the staples.
saddle stitch unit.
READY (CHECK STAPLER)
Staple jam has occurred in the stapler Remove the jammed staples.
of the finisher.
READY (CHECK STAPLER)
No staples are left in the stapler of the Refill the staples.
finisher.
READY (TONER NOT
RECOGNIZED)
The toner cartridge is not installed. Or Install the toner cartridge correctly.
it is not installed correctly.
A toner cartridge not recommended
by TOSHIBA is being used.
Use a TOSHIBA-recommended toner cartridge.
READY (HOLE PUNCH DUST BIN IS Hole punch dust bin is full of paper
Remove the paper punchings.
FULL)
punchings.
READY (INNER TRAY FULL)
The exit tray of the equipment is full of Remove the paper from the exit tray of the equipment.
paper.
Cannot copy
Check DEPARTMENT COUNTER
The number of originals to be
scanned has exceeded the limit
specified with the department code
during scanning.
Ask your administrator for details of setting the limit for
the number of copies.
Add paper
No paper is left in a drawer or on the
bypass tray.
Set paper in the drawer or on the bypass tray. The
touch panel indicates which drawer (or the bypass
tray) has no paper.
To set paper, refer to the Copying Guide.
Call for service
The equipment requires adjusting by
a service technician.
Contact your service representative with the error
code displayed on the right side of the touch panel.
Never attempt to repair, disassemble or modify
the equipment by yourself.
You could cause a fire or get an electric shock.
Always contact your service representative for
maintenance or repair of the internal parts of the
equipment.
8
Messages Displayed on the Touch Panel
1 TROUBLESHOOTING FOR THE HARDWARE
Message
Problem Description
Corrective Action
Examine stapler in the Saddle Stitch
unit
Staple jam has occurred in the stapler Remove the jammed staples.
of the saddle stitch unit.
Check staple cartridge in the Saddle
Stitch unit
No staples are left in the stapler of the Refill the staples.
saddle stitch unit.
Check staple cartridge
No staples are left in the stapler of the Refill the staples.
finisher.
Examine Stapler
Staple jam has occurred in the stapler Remove the jammed staples.
of the finisher.
Saving energy Press START button
The equipment has entered into the
energy saving mode since it has not
been used for a certain time.
Press any of the [START], [COPY], [e-FILING],
[SCAN], [PRINT], [FAX] and [ENERGY SAVER]
buttons to clear the energy saving mode.
CHANGE DRAWER TO CORRECT
PAPER SIZE
No paper suitable for the original is
set.
Place the suitable size paper for the original in the
drawer.
The size of the original is not detected Replace the original while aligning the side guides of
correctly because the original is sent
from the Reversing Automatic
Document Feeder (optional) at a
skew.
the Reversing Automatic Document Feeder to its
width so that it will be placed straight.
Time for periodic maintenance
POWER FAILURE
The equipment requires inspection
and maintenance by a service
technician.
Contact your service representative for maintenance.
A job was interrupted by a power
failure or some other reason.
The print or fax job may be incomplete. Press [JOB
STATUS] to check whether any jobs are unfinished.
To clear the messages, press the [FUNCTION
CLEAR] button twice.
ERASING DATA
The Data Overwrite Enabler is
clearing the data.
This message is displayed if the Data Overwrite
Enabler (optional) is installed. You can operate the
equipment while the message is displayed.
Check paper size setting on control
panel for Bypass
Paper jam has occurred because of a Register the paper size correctly. Just releasing the
mismatch between the paper size
placed in the bypass tray and the size
registered for the bypass tray in the
equipment.
paper jam does not prevent another paper jam.
Set the paper on the bypass tray
again.
The paper placed on the bypass tray
jammed.
Remove the jammed paper and set the paper again.
Check the direction or size of the
paper on the bypass tray and press
START
The direction or the size of the paper Check the direction and the size of the paper and then
placed on the bypass tray is incorrect. replace it on the bypass tray.
Reboot the machine
An error has occurred in the
equipment and it stopped normal
operation.
Rebooting the equipment may correct the error. To
reboot the equipment, turn the main power switch off
and then on.
TONER NOT RECOGNIZED
The toner cartridge is not installed. Or Install the toner cartridge correctly.
it is not installed correctly.
A toner cartridge not recommended
by TOSHIBA is being used.
Use a TOSHIBA-recommended toner cartridge.
Toner near Empty
Toner is running out.
Prepare a new toner cartridge.
(About another 1000 copies, set at the time of
shipment, can be made after this message appears.)
y
y
Replace a toner cartridge after the message
“Install new toner cartridge” is displayed.
If you replace a toner cartridge with a new one
while some toner is still left, make sure you
follow the procedure
Install new toner cartridge
No toner is left.
Replace the toner cartridge.
Please Empty Hole Punch Waste
The Hole Punch Unit dust bin is full.
Remove the paper punchings.
Not enough Work Space to store
originals
Will you print out stored originals?
Internal memory available ran out
while scanning.
To print out the data for the originals stored (scanned)
until the message appeared, press [YES] on the touch
panel. To delete the stored data, press [NO].
Messages Displayed on the Touch Panel
9
1 TROUBLESHOOTING FOR THE HARDWARE
Message
Problem Description
Corrective Action
The number of originals exceeds the
limits.
The scanned data are deleted.
The number of originals to be
scanned has exceeded the limit of
1000 sheets during scanning. (The
magazine sort or page number
function is used.)
Reduce the number of originals to be scanned, and
try again.
The number of originals exceeds the
limits.
Will you copy stored originals?
The number of originals to be
scanned has exceeded the limit of
1000 sheets during scanning.
To print out the data for the originals stored (scanned)
until the message appeared, press [YES] on the touch
panel. To delete the stored data, press [NO].
Error Codes
The error codes indicating the status of the equipment may appear on the touch panel. You can find the listings of these
error codes in Chapter 7.
10 Messages Displayed on the Touch Panel
1 TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Jam
„ Locating a paper jam
The equipment stops copying when the original or copy paper is jammed. Paper jams are notified on the touch panel as
follows:
Error code
Error message
Guidance for
clearing paper jams
Paper jam symbols
The paper jam symbol helps you locate the paper jam.
1
2
3
4
5
11
10
9
8
7
6
2. Reversing Automatic Document Feeder (optional) (upper) (
6. Drawer feeding portion (
The picture of the hardware device shown on the touch panel differs depending on the finisher options installed.
Clearing a Paper Jam 11
1 TROUBLESHOOTING FOR THE HARDWARE
„ Clearing a paper jam
Clear the paper jam
1
Clear the paper jam following the guidance shown on the touch panel. Press
or
to scroll the pages.
After clearing the jam, close all the opened covers.
The equipment starts the warm-up. Follow the guidance on the touch panel.
2
‰ Tips on removing the jammed paper
Note the following points in removing the jammed paper.
Remove the jammed paper carefully so as not to tear it.
To avoid tearing the jammed paper, remove the paper slowly with both hands. Using force may tear the paper, making it
more difficult to remove. See also that no pieces of torn paper are left inside the equipment.
When the paper jam sign remains after removing the jammed paper;
Depending on the timing of the occurrence, no jammed paper may be found where the paper jam sign indicates. If the
sign does not disappear after you have removed the jammed paper, follow the steps as instructed on the touch panel.
Do not touch the fuser unit or the metal portion around it.
Do not touch the fuser unit or the metal portion around it when you remove
the paper jammed in the right side of the equipment. This could burn you or
the shock could cause you to get your hand injured in the machine.
Do not touch the photoconductive drum.
When you remove the paper jammed in the right side of the equipment, be
sure not to touch the photoconductive drum. This could stain copy images.
12 Clearing a Paper Jam
1 TROUBLESHOOTING FOR THE HARDWARE
1.TROUBLESHOOTING FOR THE HARDWARE
‰ If paper jams occur frequently
The following are the common causes of paper jams. If the problem persists, check for the following situations.
y An unsuitable original is placed on the Reversing Automatic Document Feeder.
y Unavailable paper with the equipment is used.
y Paper sizes are not consistent between the size in a drawer or the bypass tray and the size registered in the
equipment.
y All the jammed paper has not been removed.
y There is too much of a gap between the paper and the side or end guide in the drawer.
y The amount of paper placed in a drawer exceeds the limit indicated on the side guide of the drawer.
„ Paper jam in the Reversing Automatic Document Feeder (optional) (Lower)
Open the Reversing Automatic Document Feeder.
1
Open the reverse cover, and remove the original.
2
Close the Reversing Automatic Document Feeder.
3
Raise the lever, and open the upper cover.
4
2
1
Clearing a Paper Jam 13
1 TROUBLESHOOTING FOR THE HARDWARE
Raise the original feeder tray, and remove the original
under the tray.
5
1
2
Lower the original feeder tray.
Close the upper cover.
6
7
„ Paper jam in the Reversing Automatic Document Feeder (optional) (Upper)
Raise the lever and open the upper cover.
1
2
1
Remove the original.
2
14 Clearing a Paper Jam
1 TROUBLESHOOTING FOR THE HARDWARE
1.TROUBLESHOOTING FOR THE HARDWARE
Turn the dial to remove the original.
3
4
5
Open the transport guide.
Raise the guide plate under the transport guide, and
remove the original under the guide plate.
Close the transport guide.
Close the upper cover.
6
7
Clearing a Paper Jam 15
1 TROUBLESHOOTING FOR THE HARDWARE
„ Paper jam in the drawer feeding portion
Open the cover of the drawer feeding portion.
1
Remove the jammed paper.
2
If the paper is jammed on the cover side, remove it as shown in the
figure on the right.
Close the cover of the drawer feeding portion.
3
„ Paper jam in the Large Capacity Feeder (optional)
Open the Large Capacity paper feed cover.
1
16 Clearing a Paper Jam
1 TROUBLESHOOTING FOR THE HARDWARE
1.TROUBLESHOOTING FOR THE HARDWARE
Remove the jammed paper.
2
Close the paper feed cover.
3
„ Paper jam in the Paper Feed Pedestal (optional)
Open the paper feeder cover of the Paper Feed
Pedestal.
1
Remove the jammed paper.
2
Close the paper feeder cover.
3
„ Paper jam in the bypass tray
Move the paper holding lever toward the outside.
The paper can now be released.
1
Clearing a Paper Jam 17
1 TROUBLESHOOTING FOR THE HARDWARE
Pull out the jammed paper in the bypass tray.
2
3
Place paper on the bypass tray and then move the
paper holding lever toward the equipment.
„ Paper jam in the automatic duplexing unit
Be careful not to let your fingers be caught between the equipment and the duplexing unit or automatic duplexing
unit.
This could injure you.
Open the automatic duplexing unit.
1
Remove paper jammed on the paper transport path
above the fuser unit. (Only for e-STUDIO355/455)
2
18 Clearing a Paper Jam
1 TROUBLESHOOTING FOR THE HARDWARE
1.TROUBLESHOOTING FOR THE HARDWARE
Remove the jammed paper while lifting up the transfer
unit.
3
2
1
Lower the transfer unit carefully and then close the automatic duplexing unit.
4
„ Paper jam on the paper transport path
Be careful not to let your fingers be caught between the equipment and the duplexing unit or automatic duplexing
unit.
This could injure you.
Open the automatic duplexing unit.
1
Remove the jammed paper.
2
Be sure not to touch the photoconductive drum when releasing the
jammed paper.
Open the transport guide of the paper feeding area
and check if any paper is jammed under this guide.
Clear the paper if there is any.
3
Close the automatic duplexing unit.
4
Clearing a Paper Jam 19
1 TROUBLESHOOTING FOR THE HARDWARE
„ Paper jam in the fuser unit
y Be careful not to let your fingers be caught between the equipment and the duplexing unit or automatic
duplexing unit.
This could injure you.
y Do not touch the fuser unit or the metal portion around it.
Since they are very hot, you could be burned or the shock could cause you to get your hand injured in the machine.
Open the automatic duplexing unit.
1
Press down the two fuser pressure release levers
(green) until they come to a stop.
2
Open the transport guide holding the green knob.
3
Release the jammed paper. Pull the jammed paper up
or down as shown in the illustrations depending on
the position of the paper.
4
Pulling it up
20 Clearing a Paper Jam
1 TROUBLESHOOTING FOR THE HARDWARE
1.TROUBLESHOOTING FOR THE HARDWARE
Pulling it down
Remove paper that sticks out from the exit tray side.
5
6
7
8
When a finisher (optional) is installed, open the
Bridge Kit (optional) cover.
Remove the jammed paper.
When a finisher is installed, close the Bridge Kit
cover.
Clearing a Paper Jam 21
1 TROUBLESHOOTING FOR THE HARDWARE
Close the transport guide holding the green knob.
9
Close the automatic duplexing unit.
10
„ Paper jam in the Job Separator and the Offset Tray (both optional)
The procedure below is only for e-STUDIO205L/255/305 with the Job Separator or the Offset Tray installed and not valid
for e-STUDIO355/455 with the Job Separator installed.
y Be careful not to let your fingers be caught between the equipment and the duplexing unit or automatic
duplexing unit.
This could injure you.
y Do not touch the fuser unit or the metal portion around it.
Since they are very hot, you could be burned or the shock could cause you to get your hand injured in the machine.
Open the automatic duplexing unit.
1
Open the Job Separator cover or the Offset Tray
cover.
2
Remove paper jammed inside of the Job Separator or
the Offset Tray.
3
22 Clearing a Paper Jam
1 TROUBLESHOOTING FOR THE HARDWARE
1.TROUBLESHOOTING FOR THE HARDWARE
Close the Job Separator cover or the Offset Tray cover.
4
5
Close the automatic duplexing unit.
„ Paper jam in the Bridge Kit (optional)
Open the cover holding the handle of the Bridge Kit.
1
Remove the paper inside the Bridge Kit.
2
If the jammed paper cannot be removed because the right side is
caught by the fuser unit, follow the steps on
Close the Bridge Kit cover.
3
„
Paper jam in the Finisher MJ-1101 and the Hole Punch Unit MJ-6101 (both optional)
Paper Jam in the upper receiving tray
Raise the lever and open the upper receiving tray.
1
Clearing a Paper Jam 23
1 TROUBLESHOOTING FOR THE HARDWARE
Remove the jammed paper.
2
Open the Bridge Kit cover.
When the Hole Punch Unit MJ-6101 is installed, proceed to step 5.
3
Remove the jammed paper.
Proceed to step 8.
4
When the Hole Punch Unit MJ-6101 is installed
Open the Hole Punch Unit cover.
5
24 Clearing a Paper Jam
1 TROUBLESHOOTING FOR THE HARDWARE
1.TROUBLESHOOTING FOR THE HARDWARE
Remove the jammed paper by turning the knob.
6
Close the Hole Punch Unit cover.
7
Close the Bridge Kit cover.
8
9
Close the upper receiving tray of the finisher.
Place your hands on the near and far side of the lever and push to
close the tray until it clicks.
Be careful not to let your fingers be caught between the
finisher body and the upper tray of the finisher.
This could injure you.
The upper receiving tray can also be closed by pressing the right
side of the lever.
Jam in the lower receiving tray.
Holding the lever, open the upper receiving tray of the
finisher.
1
Clearing a Paper Jam 25
1 TROUBLESHOOTING FOR THE HARDWARE
Remove the jammed paper.
2
Lower the shutter of the paper exit portion to open it.
3
4
5
6
Remove the jammed paper.
Open the Bridge Kit cover.
When the Hole Punch Unit MJ-6101 is installed, proceed to step 7.
Remove the jammed paper.
Proceed to step 10.
26 Clearing a Paper Jam
1 TROUBLESHOOTING FOR THE HARDWARE
1.TROUBLESHOOTING FOR THE HARDWARE
When the Hole Punch Unit MJ-6101 is installed
Open the Hole Punch Unit cover.
7
Remove the jammed paper by turning the knob.
8
Close the Hole Punch Unit cover.
9
Close the Bridge Kit cover.
10
Close the upper receiving tray of the finisher.
11
Place your hands on the near and far side of the lever and push to
close the tray until it clicks.
Be careful not to let your fingers be caught between the
finisher body and the upper tray of the finisher.
This could injure you.
The upper receiving tray of the finisher can also be closed by
pressing the right side of the lever.
Clearing a Paper Jam 27
1 TROUBLESHOOTING FOR THE HARDWARE
„
Paper jam in the Saddle Stitch Finisher MJ-1024 and the Hole Punch Unit MJ-6004 (both optional)
Hold up the guide of the paper exit portion and
remove the jammed paper.
1
When the Hole Punch Unit MJ-6004 is installed, proceed to step 2. If
1
not, go to step 6.
2
When the Hole Punch Unit MJ-6004 is installed
Open the Hole Punch Unit cover.
2
Turn the green knob to locate
indicated on the label.
With the knob set in this position, the punches are up so that paper can
be released.
within the area
3
4
Lift up the Hole Punch Unit and remove the jammed
paper.
1
2
28 Clearing a Paper Jam
1 TROUBLESHOOTING FOR THE HARDWARE
1.TROUBLESHOOTING FOR THE HARDWARE
Return the Hole Punch Unit to its original position, and close the front cover.
5
6
Raise the lever, and open the upper cover of the
finisher until it is locked.
2
1
Remove the jammed paper.
7
8
Close the upper cover of the finisher.
Clearing a Paper Jam 29
1 TROUBLESHOOTING FOR THE HARDWARE
„ Paper jam in the saddle stitch unit of the Saddle Stitch Finisher MJ-1024
(optional)
Open the front cover of the finisher.
1
Slide the green handle toward the right, and remove
the jammed paper.
2
2
1
Move the green handle to the right-hand side.
3
4
5
Remove the jammed paper and return the lever to its
original position.
Turn the right knob counterclockwise.
30 Clearing a Paper Jam
1 TROUBLESHOOTING FOR THE HARDWARE
1.TROUBLESHOOTING FOR THE HARDWARE
Turn the left knob clockwise while pressing it.
6
7
8
Remove the jammed paper from the exit portion of the
saddle stitch unit.
Lift the lever up and open the paper exit cover of the
saddle stitch unit.
Remove the jammed paper.
9
Close the paper exit cover of the saddle stitch unit and the front cover of the finisher.
10
Clearing a Paper Jam 31
1 TROUBLESHOOTING FOR THE HARDWARE
„ Paper jam in the Saddle Stitch Finisher MJ-1025 (optional)
Remove the jammed paper from the paper exit
portion.
1
Open the upper cover of the finisher.
2
Remove the paper jammed inside of the finisher.
3
Close the upper cover of the finisher.
4
32 Clearing a Paper Jam
1 TROUBLESHOOTING FOR THE HARDWARE
1.TROUBLESHOOTING FOR THE HARDWARE
„ Paper jam in the Hole Punch Unit of the Saddle Stitch Finisher MJ-1025 (optional)
Be careful not to let your fingers be caught between the equipment and the finisher (optional).
This could injure you.
Separate the finisher from the equipment.
Press the lever to unlock the finisher and slowly separate it from the
equipment, placing both of your hands on the front and back of the
finisher.
1
Turn the green knob until the triangle mark (
within the diagonal-line area on the right side of the
knob.
With the knob set in this position, the punches are up so that paper can
be released.
) falls
2
3
4
Remove the jammed paper.
Connect the finisher to the equipment.
Move the finisher slowly toward the equipment, placing both of your
hands on the front and the back of the finisher.
Clearing a Paper Jam 33
1 TROUBLESHOOTING FOR THE HARDWARE
„ Paper jam in the stapler unit of the Saddle Stitch Finisher MJ-1025 (optional)
Open the front cover of the finisher.
1
Turn the green knob at the center clockwise until the
inside of the window above the knob turns blue. Then
remove the jammed paper.
2
When you turn the green knob until the inside of the window above the
knob turns blue, the stapler is raised so that the paper can be released.
Close the front cover of the finisher.
3
34 Clearing a Paper Jam
1 TROUBLESHOOTING FOR THE HARDWARE
1.TROUBLESHOOTING FOR THE HARDWARE
„ Paper jam in the saddle stitch unit of the Saddle Stitch Finisher MJ-1025
(optional)
Be careful not to let your fingers be caught between the equipment and the finisher (optional).
This could injure you.
Separate the finisher from the equipment.
Press the lever to unlock the finisher and slowly separate it from the
equipment, placing both of your hands on the front and back of the
finisher.
1
Open the jam access cover.
2
Remove the jammed paper.
3
Open the front cover of the finisher.
4
Clearing a Paper Jam 35
1 TROUBLESHOOTING FOR THE HARDWARE
Turn the green knob on the lower right side clockwise
and then remove the paper jammed at the exit section
of the saddle stitch unit.
5
Close the jam access cover and the front cover of the finisher.
Connect the finisher to the equipment.
6
7
Move the finisher slowly toward the equipment, placing both of your
hands on the front and the back of the finisher.
36 Clearing a Paper Jam
1 TROUBLESHOOTING FOR THE HARDWARE
1.TROUBLESHOOTING FOR THE HARDWARE
„ Paper jam in the Hanging Finisher MJ-1031 (optional)
Be careful not to let your fingers be caught between the equipment and the finisher (optional).
This could injure you.
Separate the finisher from the equipment.
Press the lever to unlock the finisher and slowly separate it from the
equipment, placing both of your hands on the front and back of the
finisher.
1
Open the Bridge Kit cover.
2
Remove the jammed paper from the equipment side.
3
Close the Bridge Kit cover.
4
Remove the jammed paper from the paper exit
portion.
5
Clearing a Paper Jam 37
1 TROUBLESHOOTING FOR THE HARDWARE
Connect the finisher to the equipment.
6
Move the finisher slowly toward the equipment, placing both of your
hands on the front and the back of the finisher.
„ Clearing paper jams caused by a wrong paper size setting
Paper jams occur when there is a mismatch between the size of the paper in a drawer or the bypass tray and the size
registered for the corresponding drawer or the bypass tray in the equipment. The message “Check paper size setting on
control panel for drawer N” or “Check paper size setting on control panel for Bypass” appears on the touch panel.
In this case, just clearing the jammed paper does not prevent another paper jam. Be sure to follow the procedure below.
During the operation, the guidance for clearing the paper jam on the touch panel is not displayed. Take notes of the
following before operation: where the paper jam occurred and for which drawer the paper size setting is incorrectly
registered.
Troubleshooting differs depending on how the paper jam has occurred:
‰ Jam when making copies or prints (using a drawer)
Press the [POWER] button on the control panel until a
sound is heard.
1
“Shutdown in progress” appears on the menu. After a while, the power
of the equipment is turned OFF.
38 Clearing a Paper Jam
1 TROUBLESHOOTING FOR THE HARDWARE
1.TROUBLESHOOTING FOR THE HARDWARE
Remove the jammed paper.
2
Press the [POWER] button on the control panel.
The equipment starts warming-up.
3
4
5
Press the [USER FUNCTIONS] button on the control
panel.
Press the [USER] tab to enter the [USER] menu and press [DRAWER].
Press the drawer button indicated in the message.
6
Clearing a Paper Jam 39
1 TROUBLESHOOTING FOR THE HARDWARE
Press the paper size button for the paper that is set in the drawer.
7
Press the [USER FUNCTIONS] button to return to the basic menu and try copying or
printing again.
8
‰ Jam when making copies or prints (using the bypass tray)
Press the [POWER] button on the control panel until a
sound is heard.
1
“Shutdown in progress” appears on the menu. After a while, the power
of the equipment is turned OFF.
Remove the jammed paper.
2
Press the [POWER] button on the control panel.
The equipment starts warming-up.
3
Place the paper on the bypass tray and set the paper size.
4
Try copying or printing again.
5
40 Clearing a Paper Jam
1 TROUBLESHOOTING FOR THE HARDWARE
1.TROUBLESHOOTING FOR THE HARDWARE
‰ Jam when printing from the FAX
Turn off the main power switch.
Shutting down via the control panel is not possible in this case.
1
Remove the jammed paper.
2
Pull out the drawer indicated in the message and
remove all the paper from the drawer.
3
Close the drawer and turn on the main power switch.
The equipment starts warming-up.
4
Check the paper size registered to the drawer indicated in the message by means of the
drawer button on the touch panel.
5
Clearing a Paper Jam 41
1 TROUBLESHOOTING FOR THE HARDWARE
Place the paper in the drawer indicated in the message. Be sure to place the same-
sized paper as the size you checked in step 5.
6
Printing resumes.
If you change the paper size again after printing has been completed, make sure that the size of the paper placed
in the drawer is the same as the size registered for the corresponding drawer in the equipment.
42 Clearing a Paper Jam
1 TROUBLESHOOTING FOR THE HARDWARE
Clearing a Staple Jam
When a staple jam has occurred in the stapler of the finisher or saddle stitch unit, clear the jam following the procedure
below.
„ Staple jam in a finisher
‰ Finisher MJ-1101
Open the front cover of the finisher.
1
Remove the staple cartridge.
2
Lower the guide while holding the knob.
A: Stapling area
3
A
Do not touch the stapling area.
The actual needle point could cause you personal injury.
Remove the jammed staples.
4
Clearing a Staple Jam 43
1 TROUBLESHOOTING FOR THE HARDWARE
Holding the knob, raise the guide, and return it to its
original position.
5
Fit the staple cartridge into the stapler.
When fitting the staple cartridge, hold the green-labeled portion of the
bracket securely so that the bracket will not move.
Insert the cartridge until it is caught by the latch and fixed with a click.
6
7
Close the front cover of the finisher.
‰ Saddle Stitch Finisher MJ-1024
Open the front cover of the finisher.
1
Remove the staple cartridge.
2
44 Clearing a Staple Jam
1 TROUBLESHOOTING FOR THE HARDWARE
1.TROUBLESHOOTING FOR THE HARDWARE
Lower the guide while holding the knob.
A: Stapling area
3
4
5
A
Do not touch the stapling area.
The actual needle point could cause you personal injury.
Remove the jammed staples.
Holding the knob, raise the guide, and return it to its
original position.
Fit the staple cartridge on the stapler.
Insert the cartridge until it is caught by the latch and fixed with a click.
6
7
Close the front cover of the finisher.
Clearing a Staple Jam 45
1 TROUBLESHOOTING FOR THE HARDWARE
‰ Saddle Stitch Finisher MJ-1025
Open the front cover of the finisher.
1
Pull out the stapler unit holding the green handle.
2
Turn the top green knob clockwise until the triangle
mark and the rectangular mark are aligned as shown
in the figure on the right, so that the stapler is pulled
out toward you.
3
Take out the staple cartridge holding its green portion
on both sides.
4
Raise the guide while holding the knob.
5
46 Clearing a Staple Jam
1 TROUBLESHOOTING FOR THE HARDWARE
1.TROUBLESHOOTING FOR THE HARDWARE
Remove the jammed staples.
6
Holding the knob, lower the guide, and return it to its
original position.
7
8
Fit the staple cartridge on the stapler.
Insert the cartridge until it is fixed with a click.
Return the stapler unit to the finisher.
9
Close the front cover of the finisher.
10
Clearing a Staple Jam 47
1 TROUBLESHOOTING FOR THE HARDWARE
‰ Hanging Finisher MJ-1031
Be careful not to let your fingers be caught between the equipment and the finisher (optional).
This could injure you.
Separate the finisher from the equipment.
Press the lever to unlock the finisher and slowly separate it from the
equipment, placing both of your hands on the front and back of the
finisher.
1
Open the staple cartridge unit cover.
2
Remove the staple cartridge.
3
Lower the guide while holding the knob.
A: Stapling area
4
A
Do not touch the stapling area.
The actual needle point could cause you personal injury.
48 Clearing a Staple Jam
1 TROUBLESHOOTING FOR THE HARDWARE
1.TROUBLESHOOTING FOR THE HARDWARE
Remove the jammed staples.
5
Holding the knob, raise the guide, and return it to its
original position.
6
7
8
9
Fit the staple cartridge on the stapler.
Insert the cartridge until it is caught by the latch and fixed with a click.
Close the staple cartridge unit cover.
Connect the finisher to the equipment.
Slowly move the finisher toward the equipment by placing both of
your hands on the front and the back of the finisher.
Clearing a Staple Jam 49
1 TROUBLESHOOTING FOR THE HARDWARE
„ Staple jam in the saddle stitch unit
When staples are jammed in the saddle stitch unit of the Saddle Stitch Finisher MJ-1024, follow the procedure below to
clear the jam.
Open the front cover of the finisher.
1
Slowly pull out the saddle stitch unit.
2
Pull the stapler handle on the saddle stitch unit
toward you to unlock it. Then turn the stapler
clockwise by 60 degrees.
3
2
The stapler is locked and cannot be turned further when it lies almost
horizontally.
1
Remove the staple cartridge.
4
While pushing the lever (1 in the figure) downward,
pull up the shutter with the knob (2).
5
1
2
50 Clearing a Staple Jam
1 TROUBLESHOOTING FOR THE HARDWARE
1.TROUBLESHOOTING FOR THE HARDWARE
Remove the jammed staples.
A: Stapling area
6
Do not touch the stapling area
The actual needle point could cause you personal injury.
A
Push the knob (2) to return it to its original position.
Make sure that the lever (1) is latched on the shutter.
7
8
9
2
1
Fit the staple cartridges.
Push down each cartridge until it is fixed with a click.
Unlock the stapler by pulling its handle toward you.
Then return the stapler to its original position.
2
1
Carefully insert the saddle stitch unit into the finisher.
10
11
Make sure of the following two requirements before test stapling:
y The finisher is securely attached to the equipment.
y A3, B4, A4-R, LD, or LT-R paper is set in the drawer.
Clearing a Staple Jam 51
1 TROUBLESHOOTING FOR THE HARDWARE
Close the front cover of the finisher.
Test stapling starts automatically.
12
Test stapling is necessary to prevent void stapling. Note that the test stapling starts automatically when the two
requirements in step 11 are met with the front cover of the finisher closed. If the test stapling does not start,
make sure to check the two requirements again. Then open and again close the front cover of the finisher.
52 Clearing a Staple Jam
1 TROUBLESHOOTING FOR THE HARDWARE
Replacing a Toner Cartridge
When the toner cartridge runs out, the message “Install New toner cartridge” appears. Replace the toner cartridge
following the procedure below when you see this message.
To assure optimal printing performance, we recommend that you use only genuine TOSHIBA toner cartridges.
Replacing a Toner Cartridge 53
1 TROUBLESHOOTING FOR THE HARDWARE
Recommended toner cartridges
To assure optimal printing performance, we recommend that you use only genuine TOSHIBA toner cartridges.
If you use a TOSHIBA-recommended toner cartridge, you can utilize the following three functions of this equipment:
Cartridge detecting function: This function checks if the toner cartridge is correctly installed and notifies you if it is
not.
Toner remaining check function: This function notifies you when there is little toner remaining in the cartridge, as
well as notifying your authorized service representative automatically by remote service.
Image quality optimization function: This function controls image quality according to the characteristics of the toner
to be used and enables you to print images of an optimal quality.
If you are using a toner cartridge other than the one we recommend, the equipment may not be able to detect whether
it is installed or not. Therefore, even if the toner cartridge is correctly installed, the error message “TONER NOT
RECOGNIZED” appears on the touch panel and printing may not be performed. You may also not be able to utilize the
image quality optimization function, the toner remaining check function, and the remote service function which notifies
your service representative automatically.
If you are using a toner cartridge other than the one we recommend and find the cartridge detection function
inconvenient, please contact your service representative. The cartridge detecting function set by default can be
canceled. Remember once this function has been canceled, you will not be able to utilize the three functions
mentioned above even if you change the cartridge to the one we recommend.
Never attempt to incinerate toner cartridges.
Dispose of used toner cartridges in accordance with local regulations.
Some toner remains in the toner cartridge while the message “Toner near Empty” is displayed. Although you can
replace the toner cartridge with a new one, make sure you follow the procedure
Open the front cover.
1
Hold down the green lever.
The toner cartridge is slightly pushed out.
2
54 Replacing a Toner Cartridge
1 TROUBLESHOOTING FOR THE HARDWARE
1.TROUBLESHOOTING FOR THE HARDWARE
Pull out the toner cartridge.
3
Never attempt to incinerate toner cartridges.
Dispose of used toner cartridges in accordance with local
regulations.
Shake the new toner cartridge strongly with the label
surface down to loosen the toner inside.
4
5
6
7
10
Remove the protective sheet from the end of the
cartridge.
Pull out the seal in the direction of the arrow.
Insert the toner cartridge along the rail.
Insert the toner cartridge until it clicks.
Replacing a Toner Cartridge 55
1 TROUBLESHOOTING FOR THE HARDWARE
Clean the charger.
Hold the cleaning knob of the charger and pull it out toward you
carefully until it comes to a stop. Then reinsert it in its original position
carefully. Repeat this procedure two or three times.
8
Check if the cleaning knob is fully inserted after cleaning.
Close the front cover.
9
56 Replacing a Toner Cartridge
1 TROUBLESHOOTING FOR THE HARDWARE
1.TROUBLESHOOTING FOR THE HARDWARE
„ Replacing a “Near Empty” toner cartridge
The message “Toner near Empty” appears on the touch panel when there is not much toner left in a toner cartridge.
Some toner remains in the toner cartridge while the message “Toner near Empty” is displayed. You can replace the toner
cartridge with a new one, but if you do so, make sure that you follow the procedure below. This procedure is needed to
reset the toner counter to display the next “Toner near Empty” message at the proper time.
Press [JOB STATUS].
1
Press the [TONER] tab.
2
Replacing a Toner Cartridge 57
1 TROUBLESHOOTING FOR THE HARDWARE
Press [REPLACE TONER CARTRIDGE].
3
To replace a toner cartridge, press [YES]. To cancel, press [NO].
4
Replace the toner cartridge.
5
6
See
Press [FINISH].
Press the [USER FUNCTIONS] or [COPY] button on the control panel.
The menu returns to the BASIC menu.
7
58 Replacing a Toner Cartridge
1 TROUBLESHOOTING FOR THE HARDWARE
Refilling With Staples
Refill with staples according to the following procedures when the staples in the stapler of the finisher and saddle stitch
unit run out.
„ Refilling finisher staples
‰ Finisher MJ-1101
Open the front cover of the finisher.
1
Remove the staple cartridge.
2
Take the empty staple case out of the staple cartridge.
Pull up the empty staple case while pushing both sides as shown in the
figure.
3
Fit a new staple case on the staple cartridge.
Push the staple case hook into the staple cartridge socket until you
hear a click.
4
Refilling With Staples 59
1 TROUBLESHOOTING FOR THE HARDWARE
Fit the staple cartridge into the stapler.
When fitting the staple cartridge, hold the green-labeled portion of the
bracket securely so that the bracket will not move.
Insert the cartridge until it is caught by the latch and fixed with a click.
5
6
Close the front cover of the finisher.
If the message “Check staple cartridge” remains, repeat the procedure above from steps 1 to 6.
‰ Saddle Stitch Finisher MJ-1024
Open the front cover of the finisher.
1
Remove the staple cartridge.
2
Press the buttons on both sides of the cartridge.
The transparent cover of the cartridge is lifted.
3
60 Refilling With Staples
1 TROUBLESHOOTING FOR THE HARDWARE
1.TROUBLESHOOTING FOR THE HARDWARE
After the transparent cover is lifted, take out the
empty staple case.
4
5
6
1
2
Fit the new staple case into the staple cartridge.
Push the staple case into the cartridge until it clicks.
In this step, do not remove the seal bundling the staples.
Push the transparent cover down to its original
position, and pull out the seal bundling the staples.
1
2
Fit the staple cartridge into the stapler.
Insert the staple cartridge until it is caught by the latch and fixed with a
click.
7
8
Close the front cover of the finisher.
If the message “Check staple cartridge” remains, repeat the procedure above from steps 1 to 8.
Refilling With Staples 61
1 TROUBLESHOOTING FOR THE HARDWARE
‰ Saddle Stitch Finisher MJ-1025
Open the front cover of the finisher.
1
Pull out the stapler unit holding the green handle.
2
Turn the top green knob clockwise until the triangle
mark and the square mark are aligned as shown in the
figure on the right, so that the stapler is pulled out
toward you.
3
Take out the staple cartridge holding its green portion
on both sides.
4
Press the buttons on both sides of the cartridge.
The transparent cover of the cartridge is lifted.
5
62 Refilling With Staples
1 TROUBLESHOOTING FOR THE HARDWARE
1.TROUBLESHOOTING FOR THE HARDWARE
After the transparent cover is lifted, remove the empty
staple case.
6
1
2
Fit the new staple case into the staple cartridge.
Push the staple case into the cartridge until it clicks.
7
In this step, do not remove the seal bundling the staples.
Push the transparent cover down to its original
position, and pull out the seal bundling the staples.
8
1
2
Fit the staple cartridge on the stapler.
Insert the cartridge until it is fixed with a click.
9
Return the stapler unit to the finisher.
10
Refilling With Staples 63
1 TROUBLESHOOTING FOR THE HARDWARE
Close the front cover of the finisher.
11
If the message “Check staple cartridge” remains, repeat the procedure above from steps 1 to 11.
‰ Hanging Finisher MJ-1031
Be careful not to let your fingers be caught between the equipment and the finisher (optional).
This could injure you.
Separate the finisher from the equipment.
Press the lever to unlock the finisher and slowly separate it from the
equipment, placing your hands on the front and rear of the finisher.
1
Open the staple cartridge unit cover.
2
Remove the staple cartridge.
3
64 Refilling With Staples
1 TROUBLESHOOTING FOR THE HARDWARE
1.TROUBLESHOOTING FOR THE HARDWARE
Press the buttons on both sides of the cartridge.
The transparent cover of the cartridge is lifted.
4
5
6
7
8
After the transparent cover is lifted, remove the empty
staple case.
1
2
Fit the new staple case into the staple cartridge.
Push the staple case into the cartridge until it clicks.
In this step, do not remove the seal bundling the staples.
Push the transparent cover down to its original
position, and pull out the seal bundling the staples
1
2
Fit the staple cartridge into the stapler.
Insert the staple cartridge until it is caught by the latch of the staple
cartridge and is fixed with a click.
Refilling With Staples 65
1 TROUBLESHOOTING FOR THE HARDWARE
Close the staple cartridge unit cover.
9
Connect the finisher to the equipment.
10
Move the finisher slowly toward the equipment, placing both of your
hands on the front and the back of the finisher.
If the message “Check staple cartridge” remains, repeat the procedure above from steps 1 to 10.
„ Refilling saddle stitch unit staples
When the staples of the stapler in the Saddle Stitch Finisher MJ-1024 have run out, refill staples following the procedure
below.
Open the front cover of the finisher.
1
Slowly pull out the saddle stitch unit.
2
66 Refilling With Staples
1 TROUBLESHOOTING FOR THE HARDWARE
1.TROUBLESHOOTING FOR THE HARDWARE
Unlock the stapler of the saddle stitch unit by pulling
its handle toward you. Keep pulling the handle, and
turn the stapler clockwise by about 60 degrees.
The stapler is locked and cannot be turned any further when it lies
almost horizontally.
3
4
5
6
7
2
1
Remove the empty staple cartridges.
Replace both cartridges at a time.
Fit the new cartridges.
Insert each cartridge until it is caught by the latch and is fixed with a
click.
Unlock the stapler of the saddle stitch unit by pulling
its handle toward you, and lower the stapler to its
original position.
2
1
Slowly insert the saddle stitch unit into the finisher.
Refilling With Staples 67
1 TROUBLESHOOTING FOR THE HARDWARE
Make sure that the following two requirements are met before test stapling:
y The finisher is securely attached on the equipment.
y A3, B4, A4-R, LD, or LT-R paper is loaded in the drawer
8
9
When the message “Check staple cartridge in the Saddle Stitch unit” is displayed, this step is unnecessary.
Proceed to step 9.
Close the front cover of the finisher.
When the message “READY (CHECK STAPLER)” is displayed, test stapling starts automatically.
Test stapling is necessary to prevent void stapling. Note that the test stapling starts automatically when the two
requirements in step 8 are met with the front cover of the finisher closed. If the test stapling does not start, make
sure to check the two requirements again. Then open and again close the front cover of the finisher.
68 Refilling With Staples
1 TROUBLESHOOTING FOR THE HARDWARE
Cleaning the Charger
If the inside of the charger is dirty, staining may appear on the copied image. Clean the charger following the procedure
below.
Open the front cover.
1
Clean the charger.
Hold the cleaning knob of the charger and pull it out toward you
carefully until it comes to a stop. Then reinsert it in its original position
carefully. Repeat this procedure two or three times.
2
Check if the cleaning knob is fully inserted after cleaning.
Close the front cover.
3
Cleaning the Charger 69
1 TROUBLESHOOTING FOR THE HARDWARE
Cleaning the Hole Punch Dust Bin
When the hole punch dust bin becomes full, dispose of the paper punchings following the procedure below.
„ Hole Punch Unit MJ-6101 / MJ-6004
Open the Hole Punch Unit cover.
1
Pull out the hole punch dust bin.
2
Dispose of the paper punchings.
3
Push back in the hole punch dust bin.
4
Close the Hole Punch Unit cover.
5
„ Hole Punch Unit MJ-6005
Separate the finisher from the equipment.
Press the lever to unlock the finisher and slowly separate it from the
equipment, placing both of your hands on the front and back of the
finisher.
1
Pull the hole punch dust box out of the Hole Punch
Unit.
2
70 Cleaning the Hole Punch Dust Bin
1 TROUBLESHOOTING FOR THE HARDWARE
1.TROUBLESHOOTING FOR THE HARDWARE
Dispose of the paper punchings.
3
4
5
Push back in the hole punch dust bin.
Connect the finisher to the equipment.
Move the finisher slowly toward the equipment, placing both of your
hands on the front and the back of the finisher.
Cleaning the Hole Punch Dust Bin 71
1 TROUBLESHOOTING FOR THE HARDWARE
Removal and Installation of the Exit Support Tray
If a large number of sheets is printed at a time, some printed sheets may be pushed out of the exit tray. Remove the exit
support tray on the exit tray of the equipment when printing more than 300 sheets.
If the exit support tray is removed, the alignment of a large number of printed sheets can be improved and about 500
sheets of Toshiba recommended plain paper can be loaded on the exit tray.
y To maintain the alignment of the printed sheets, use the exit support tray unless a large number of sheets is
printed.
y When an optional finisher or Job Separator is installed in the equipment, do not remove the exit support tray.
(e-STUDIO205L/255/305, in which the Offset Tray or Job Separator is installed, has no exit support tray.)
Removing the exit support tray
Place your fingers in the 2 grooves on the exit
support tray and lift it up by pressing the latches
inward.
1
Installing the exit support tray
Hold the exit support tray so that the letter “F” on its
back points towards you.
1
Install the exit support tray.
Align the grooves on the exit tray with the protrusions on the back of
the exit support tray and push it until it clicks in order to fix it.
2
72 Removal and Installation of the Exit Support Tray
2 TROUBLESHOOTING FOR COPYING
Copying Problems
See the table below when you have a problem in operating copy function or have an unexpected copy output.
Problem Description
Cause
Corrective Action
Functions cannot be set.
Another function that is unavailable
Some functions cannot be combined.
for the combination has already been For details, refer to Chapter 8 of the Copying Guide.
set.
Copying stops while scanning the The number of scanned pages has
To copy the scanned images, press [YES]. To cancel,
press [NO].
originals. (The message “The
number of originals exceeds the
limits Will you print out stored
originals?” appears.)
reached the maximum.
Copying stops while scanning the No available internal memory
To copy the scanned images, press [YES]. To cancel,
press [NO].
originals. (The message “Not
enough Work Space to store
originals Will you print out stored
originals?” appears.)
remains.
Copied image is too light.
No toner is left.
The message “Install new toner cartridge” appears when
no toner is left. Replace the toner cartridge.
Copy density is set too light.
Copy density is set too dark.
Darken the density manually or try the automatic density
mode.
Copied image is too dark.
Copied image has stains.
Lighten the density manually or try the automatic density
mode.
The Original Cover (optional) or the
Reversing Automatic Document
Feeder (optional) is not fully lowered.
Lower them fully to block the outside light.
The original glass, platen sheet,
Clean them.
scanning area and guide are stained.
The copy density is set too dark.
Lighten the density manually or try the automatic density
mode.
A transparent original such as a
To copy a transparent original clearly, put a sheet of blank,
transparency or tracing paper is being white paper behind the original. Make sure that the paper
used.
is large enough to cover the original.
Copy image is skewed.
The original is sent from the
Reversing Automatic Document
Feeder (optional) at a skew.
Replace the original while aligning the side guides of the
Reversing Automatic Document Feeder to its width so that
it will be placed straight.
Copied image is partially missing. The size or orientation of the copy
paper and that of the original are not
consistent. The reduction ratio is not
properly set.
Fit the copy paper size to the original or set the reduction
ratio for the copy paper.
The binding margin is too wide.
Set the binding margin width to fully cover the original.
For details, refer to Chapter 4 of the Copying Guide.
The original is larger than the
printable area.
The outside part of the printable area cannot be copied.
Copied image is blurred.
There is a gap between the original
glass and the original.
Lower the Original Cover (optional) or the Reversing
Automatic Document Feeder (optional) fully so that the
original fully contacts the platen glass.
The copy paper is damp.
Replace it with dry copy paper.
74 Copying Problems
2 TROUBLESHOOTING FOR COPYING
2.TROUBLESHOOTING FOR COPYING
Problem Description
Cause
Corrective Action
Copied image has unevenness in The charger is stained.
the horizontal direction.
Clean the charger.
Copied image has black streaks
in the horizontal direction.
The scanning area or guides are
stained.
Clean them.
The charger is stained.
Clean the charger.
Copying Problems 75
3.
TROUBLESHOOTING FOR PRINTING
This chapter describes how to troubleshoot the problems on printing.
Clearing print job errors........................................................................................................................................78
Printer Driver Problems......................................................................................................... 80
Cannot print (port setting problems).....................................................................................................................80
Command line options not processed..................................................................................................................80
Retrieval of printer configuration failed.................................................................................................................81
Cannot print a job as expected using PS3 printer driver......................................................................................81
Network Connection Problems............................................................................................. 82
Cannot print properly with AppleTalk print............................................................................................................82
Client Problems...................................................................................................................... 83
3 TROUBLESHOOTING FOR PRINTING
Print Job Problems
This section describes how to clear the print jobs errors.
„ Clearing print job errors
Problem Description
A print job error occurs and [JOB STATUS] blinks when the paper specified by the computer is not set in the drawers of the
equipment.
Corrective Action
Clear the error following the procedure below.
To print by placing paper on the bypass tray
Press the [JOB STATUS] which is blinking.
1
Place paper of the size specified with the computer on the bypass tray, and press the
[START] button.
2
Printing is performed. Press [JOB STATUS] when printing has been completed.
Printing by selecting a paper size already placed in another drawer
You can perform printing with the paper already placed in the drawers. Some part of the image may not be printed,
however, if the paper size in the drawer is smaller than the one you have specified.
Press the drawer button you intend to use on the touch panel and press the [START] button.
78 Print Job Problems
3 TROUBLESHOOTING FOR PRINTING
3.TROUBLESHOOTING FOR PRINTING
„
Cannot remember the document password for a Private Print job
Problem Description
I cannot remember the document password for my Private Print job.
Corrective Action
The document password for a Private Print job is never shown, once the job has been sent to the equipment.
To print the failed Private Print job, submit the document again as a new Private Print job.
The failed Private Print job remains unprinted in the job queue. To delete it, either way below is required. Contact the
administrator of the equipment.
y Enter the administrator’s password in the Private Print job list on the touch panel and delete the job.
For details, refer to the Printing Guide.
y Log on TopAccess with the administrator’s password and delete the job in the Print Job list.
For details, refer to the TopAccess Guide.
Print Job Problems 79
3 TROUBLESHOOTING FOR PRINTING
Printer Driver Problems
This section describes the troubleshooting for the printer drivers.
For the error messages that appear during the installation of the printer drivers, refer to the Software Installation
Guide.
„ Cannot print (port setting problems)
Problem Description
I cannot perform printing with the equipment.
Corrective Action
If the printer driver on the client computer points to a wrong network port, jobs neither appear in the current jobs queue nor
are printed. Fix the problem following the procedure below:
1. Open the Printers folder from the Control Panel.
2. Right-click the printer driver icon.
3. Select Properties from the shortcut menu.
4. Select the [Ports] tab.
5. Make sure that the path to the printer and the device name are correct.
\\<device name>\print
<device name> is the same as the device name set from the touch panel. “print” may be “pcl6” or “ps3” depending on
the printer driver you use.
6. Click the [General] Tab and click [Print Test Page] to confirm that the settings are correct.
„ Cannot print (SNMP Community Name problems)
Problem Description
I cannot perform printing with the equipment.
Corrective Action
Check if the SNMP community names are the same in the following 3 settings.
y Equipment
y TCP/IP port of the [Ports] tab in the printer driver
y [SNMP Settings] dialog box of the [Configuration] tab in the printer driver
„ Command line options not processed
Problem Description
All the print options are sent to the equipment at the beginning of the print job. If the print file already contains print
commands, they overwrite the command line options you set. For example, if the print file specifies Letter paper, and you
specify A4 paper with the lp command, the document is printed on Letter size paper.
Corrective Action
Change the properties of the document you intend to print to create another print file. Submit the print job using the lp
command without setting additional parameters.
80 Printer Driver Problems
3 TROUBLESHOOTING FOR PRINTING
3.TROUBLESHOOTING FOR PRINTING
„ Retrieval of printer configuration failed
Problem Description
When accessing the printer properties, the message “Retrieval of printer configuration failed” is displayed.
Corrective Action
The printer driver cannot communicate with the equipment. Try the steps in the checklist below.
No Check...
Yes
No
Corrective Action
1
Is the equipment turned on?
Next Step
Turn on the equipment.
Ö
Ø
2
Can you connect the computer to the equipment
via TopAccess?
Restart the equipment.
Next Step
Ö
Ø
3
Does the same message appear again when you
access the property of the printer driver?
Check the printer driver port assignment and
make sure that it is correct.
Ö
End
„ Cannot print a job as expected using PS3 printer driver
Problem Description
When printing with the PS3 printer driver from the application that creates the PostScript code for printing such as Adobe
Acrobat, the following print options may not work correctly:
y Manual Scale
y Print Paper Size
y Paper Type
y Use Front Cover
y Use Back Cover
y Insert Pages
y Interleave Pages
y Booklet
y Multiple Pages per Sheet
y All options from the [Effect] tab
y All options from the [Image Quality] tab
Corrective Action
Disable [Use PostScript Passthrough] in the [PostScript Settings] dialog box and print the document.
„
Cannot change settings on the [Fonts] tab and the [Configuration] tab
Problem Description
The [Fonts] tab and [Configuration] tab are grayed out and their settings cannot be changed.
Corrective Action
Users who do not have the privilege to change the printer driver setting cannot change the options in the [Fonts] tab and
[Configuration] tab. Please log on with the Administrator or a Power User.
Printer Driver Problems 81
3 TROUBLESHOOTING FOR PRINTING
Network Connection Problems
This section describes the troubleshooting for printing in the network connection environment.
See also the checklists by types of printing and operating systems on
„ Cannot print with the equipment (network connection problems)
Problem Description
I cannot perform printing with the equipment.
Corrective Action
See the checklist below to determine if the cause of the problem is related to a network.
If it is, see
P.96 “Printing Problems (Network Related)”. In that section, several OS- and printing method-based check
lists are provided to help you find an appropriate action to take.
No. Check...
Yes
No
Corrective Action
1
Have you set the protocol settings so they are
compatible with your network and client protocol
settings?
Set up the proper protocol.
Next Step
Ö
Ø
2
3
Have you set up the appropriate type(s) of print
services that should be supported?
Check the settings required for your printing
environment.
Next Step
Ö
Ö
Ø
If you are using Novell print services, did you set
up the Novell side of network printing, such as
creating print servers and attaching the print
queue?
Set up the NetWare server.
Refer to the Software Installation Guide.
Next Step
Ø
4
5
If you set up Novell print services, can you see the
print job using PCONSOLE or NWAdmin?
Refer to your Novell PCONSOLE or NWAdmin
user documentation for help with using these
utilities.
Next Step
Ö
Ö
Ö
Ø
Have you checked the gateway and subnet
settings to make sure that the equipment is part of
the same network gateway as the client from
which you are trying to print?
Set up the TCP/IP correctly.
Next Step
Ø
6
Are other services and communications
performed over the network behaving in the
normal and expected manner?
Refer to your network documentation or use a
network diagnostic utility to identify the network
problem.
End
„ Cannot print with SMB print
Problem Description
When trying to print a document using an SMB connection, the job cannot be printed and such messages continuously
appear as “No more connections can be made to this remote computer” or “Your file could not be printed due to an error”.
Corrective Action
SMB print is supposed to be utilized in a small network. If you can use Windows 2000, Windows XP, Windows Vista,
Windows 7, Windows Server 2003, or Windows Server 2008 as a print server, printing via the Windows Print Server is
recommended.
If you cannot use the Windows Print Server in your network, use LPR print instead.
„ Cannot print properly with AppleTalk print
Problem Description
y Text will be printed as stripe lines when printing an email message.
y Some text is not printed in a document.
y When printing from a web browser, the web page is not printed in spite of the print job being sent to the equipment.
Corrective Action
If the errors above occur with AppleTalk print, use LPR print instead.
82 Network Connection Problems
3 TROUBLESHOOTING FOR PRINTING
Client Problems
This section describes how to identify and correct the problems caused by the clients* connected to the equipment.
*
One of the common examples of clients is a computer that sends a print job to the equipment and make it perform printing.
„ Checking the client status
Problem Description
The printing problems are caused by the printer driver settings, network settings, errors in the network connections, and
so forth. First, contact the administrator of the equipment to see if there is one of these kinds of problem, or see the
following sections:
Another possible cause is one related to a client. If the print jobs sent from a specific client within a network fails, the
problem may be caused by the client.
The checklist below will help you identify the source of the error and direct you to the information resolving the problem. If
the problem persists after you have followed all of the steps, contact your service representative.
No. Check...
Yes
No
Corrective Action
1
Does the equipment work properly? Are copy jobs
output properly?
Check the device status displayed in the Device
page of TopAccess.
Next Step
Ö
Ø
2
See the Device page of TopAccess. Are the
options specified for the job supported by the
hardware configuration?
If not, delete the job, install the required
components, and try again. Contact your service
representative for further information.
Next Step
Ö
Ö
Ø
3
Can you print the jobs from other clients?
See the following section to fix the problem.
Next Step
Ø
4
5
6
Have you ever printed successfully from this
client?
See the following section to fix the problem.
Next Step
Ö
Ö
Ø
Did you set up the printer driver other than by an
SMB connection?
See the following section to fix the problem.
Next Step
Ø
(For Macintosh only)
Can you see the equipment you created in the
Selector?
Refer to the Software Installation Guide.
Next Step
Ö
Ø
7
At this point, the problem is most likely to be related to a client-side error. Refer to the Printing Guide to fix the problem.
Client Problems 83
3 TROUBLESHOOTING FOR PRINTING
Hardware Problems
This section describes troubles caused by the hardware device (the equipment).
If an icon or a message indicating an error is not displayed, or the problems on printer drivers or the network connection
cannot be specified, a hardware problem is a possible cause of the trouble.
The following are common factors involved in the hardware problems:
y System board, cables, and connectors
y The equipment, and its (optional) components such as the duplexing unit or the Finisher
y System software or firmware of the equipment
„ Startup page not printed
Problem Description
If the startup page is not printed when you turn on the equipment, even though the Print Startup Page is enabled, there
may be a hardware error. Contact your service representative.
Corrective Action
1. Make sure that Print Startup Page is enabled.
2. Turn on the equipment. (If it is already on, restart it.)
3. Check if the startup page is output.
When the Print Startup Page is enabled, normally the Startup Page is automatically printed. If not, the problem is possibly
caused by the hardware. Contact your service representative.
„ Print jobs not output
Problem Description
All the clients within a network fail to make the equipment output the print jobs.
Corrective Action
There remains a possibility that an improper settings of the software such as printer drivers caused the problem, however,
a hardware error is possible, if none of the clients can print the jobs. Try the steps on the checklist below. If the problem
persists after you have followed all of the steps, contact your service representative.
No Check...
Yes
No
Corrective Action
1
Is printing prohibited from all connected client
computers?
See the following section to fix the problem:
Next Step
Ö
Ø
2
Can you see the job from TopAccess or another
print monitoring utility, such as PCONSOLE or
Print Manager?
See the following section to fix the problem:
Next Step
Ö
Ö
Ø
3
Can you identify the problem with the error
message or the error code and resolve it?
See the following sections to fix the problem:
End
Also refer to the Printing Guide for more information on resolving output errors caused by software settings.
84 Hardware Problems
4 TROUBLESHOOTING FOR SCANNING
Scanning Problems
This section describes troubleshooting for using scan data.
„ Cannot E-mail my scans
Problem Description
I have scanned a document and sent the copy as an e-mail attachment, but the e-mail does not reach the specified e-mail
address.
Corrective Action
Check the following points:
y The correct e-mail addresses are specified.
y The equipment is correctly configured for and connected to the network.
y For the SMTP Client settings, the SMTP server address is correctly set.
y For the SMTP Client settings, the Port Number is correctly set.
y For the SMTP Client settings, the settings for SSL and/or authentication are correctly set.
y The data size of the attached file is smaller than/equal to the maximum data size receivable on the recipient’s side.
For details on the network settings, refer to the TopAccess Guide.
For details on e-mailing the scanned image, refer to the Scanning Guide.
„ Cannot find the data saved in the shared folder
Problem Description
I have scanned a document and saved the copy in shared folder of the equipment, but cannot locate the saved file.
Corrective Action
y For Windows OS, search the network for the equipment using the search function of Explorer. The data are stored in
the equipment’s shared folder named “FILE_SHARE.”
y For Macintosh, make sure that the OS version is Mac OS X 10.3.x or later; a client computer running Mac OS X 10.2.x
or earlier cannot access the shared folder on the equipment. If your computer is running Mac OS X 10.3.x or later,
search the network for the equipment on Finder and access the folder named “FILE_SHARE.”
y If you cannot find the equipment on the network, make sure that the SMB Server Protocol setting is enabled on
TopAccess.
For details on the network settings, refer to the TopAccess Guide.
For details on storing the scanned image, refer to the Scanning Guide.
86 Scanning Problems
5.
TROUBLESHOOTING FOR e-Filing
This chapter describes how to troubleshoot the problems on e-Filing.
Error messages....................................................................................................................................................89
5 TROUBLESHOOTING FOR e-Filing
e-Filing Web Utility Problems
This section describes troubleshooting for the web browser-based e-Filing web utility. You will also find the error messages
and the corrective actions for each message.
„ e-Filing Web Utility terminates the session
Problem Description
The message “This operation will end your e-Filing session.” appears and e-Filing Web Utility returns to its top page.
Corrective Action 1
Clicking [Return], [Refresh], and [home] button or [login] link leads to this message and e-Filing Web Utility returns to its
top page. In this case, try to do the operation you intend to do again.
Corrective Action 2
Closing the window by clicking the [x] button of the browser leads to the message “This operation will end your e-Filing
session.” and the e-Filing session ends. Finish your current operation before you close the window.
Corrective Action 3
Operating the main window while the sub window is displayed leads to the message “This operation will end your e-Filing
session.” and the processing displayed on the sub window ends. Do not operate the main window until the processing on
the sub window has been completed.
„
Numerous sub windows repeatedly appear
Problem Description
Numerous sub windows repeatedly appear and e-Filing becomes uncontrollable.
Corrective Action
Close all the windows and exit from the web browser. Then restart the browser and clear the cookie files from “Internet
Option” (for Internet Explorer).
„ Displaying the items in the Contents Frame takes a long time
Problem Description
Displaying the items in the Contents Frame takes a long time.
Corrective Action
Displaying more than 100 items in the Contents Frame may take a long time. A smaller number of items shortens the time
for displaying.
88 e-Filing Web Utility Problems
5 TROUBLESHOOTING FOR e-Filing
5.TROUBLESHOOTING FOR e-Filing
„ Error messages
See the table below to troubleshoot the problem if a message appears.
Message
Corrective Action
Internal error occurred. Please restart e-Filing.
Turn OFF and then ON the power of the equipment and then try
again. If the error message is still displayed, contact your system
administrator or contact your dealer for support.
Your e-Filing Session has Timed Out. Please Restart.
Exit from e-Filing and change the session timer setting to be
longer on the Setup page of the TopAccess Administrator mode.
Then restart it.
The items have been modified.
The items are currently being modified by another user. Try again
after the other user has finished modifying the items.
Cannot start e-Filing Session. The Disk is Full.
Erase the unnecessary data from the Control Panel. For
instructions on how to delete data from the Control Panel, refer to
the e-Filing Guide.
Cannot create a Box. The Disk is full.
Cannot create a Folder. The Disk is full.
Cannot edit the Document. The Disk is full.
Cannot insert Page. The Disk is full.
Cannot archive Documents. The Disk is full.
Cannot upload archived file. The Disk is full.
Cut failed. Disk is full.
Erase unnecessary data using the administrative function or
deleting the data in boxes for making hard disk space.
Erase unnecessary data using the administrative function or
deleting the data in boxes for making hard disk space.
Erase unnecessary data using the administrative function or
deleting the data in boxes for making hard disk space.
Erase unnecessary data using the administrative function or
deleting the data in boxes for making hard disk space.
Erase unnecessary data using the administrative function or
deleting the data in boxes for making hard disk space.
Erase unnecessary data using the administrative function or
deleting the data in boxes for making hard disk space.
Erase unnecessary data using the administrative function or
deleting the data in boxes for making hard disk space.
Copy failed. Disk is full.
Erase unnecessary data using the administrative function or
deleting the data in boxes for making hard disk space.
Paste failed. Disk is full.
Erase unnecessary data using the administrative function or
deleting the data in boxes for making hard disk space.
Save failed. Disk is full.
Erase unnecessary data using the administrative function or
deleting the data in boxes for making hard disk space.
Cannot create a Folder. Maximum number of folders has been
reached.
Delete unnecessary folders and create a new folder. You can
create up to 100 folders in each box.
Cannot create a document. Maximum number of documents has Delete unnecessary documents and create a new document. You
been reached.
can create up to 400 documents in each box and folder.
Cannot insert Page. Maximum number of pages has been
reached.
Delete unnecessary pages and insert a new page. A document
can contain up to 200 pages.
Paste failed. Maximum number of page range is reached.
Cut failed. The items have been deleted or modified.
Copy failed. The items have been deleted or modified.
Paste failed. The items have been deleted or modified.
Delete failed. The items have been deleted or modified.
Please enter valid password.
Delete unnecessary pages and paste pages in the document. A
document can contain up to 200 pages.
Refresh the page and make sure that the item was deleted or is
currently being modified.
Refresh the page and make sure that the item was deleted or is
currently being modified.
Refresh the page and make sure that the item was deleted or is
currently being modified.
Refresh the page and make sure that the item was deleted or is
currently being modified.
Enter the correct password.
A folder with the name you specified already exists. Please try
again.
Use a name that does not exist in the box.
Another user has been archiving or uploading. Please try again
later.
The document is being archived or uploaded by another user. Try
again after the other user has finished archiving or uploading.
The Maximum Possible Archive Size exceed. Archiving is not
Possible.
An archive file larger than 2 GB cannot be created. Make sure
that the archive file will be less than 2 GB by archiving smaller
groups of files instead of a large one.
The Box cannot be erased. A document contained in Box is being A document contained in the box is being used by another user.
used.
Try again after the other user has finished using the document.
e-Filing Web Utility Problems 89
5 TROUBLESHOOTING FOR e-Filing
Message
Corrective Action
The document is being used. Please try again later.
File format doesn’t correspond. Please contact Administrator.
e-Filing is not ready. Please try again later.
The selected document is being used by another user. Try again
after the other user has finished using the document.
Contact your administrator to convert the archive file and try
again.
e-Filing has not yet been activated. Try again later.
90 e-Filing Web Utility Problems
6.
TROUBLESHOOTING FOR NETWORK
CONNECTIONS
This chapter describes how to troubleshoot the problems on network connections.
Cannot locate the equipment in the network........................................................................................................92
Equipment does not respond to ping command...................................................................................................94
Network shutdown occurs or touch panel disabled after LDAP search................................................................95
6 TROUBLESHOOTING FOR NETWORK CONNECTIONS
Locating the Equipment in the Network
„ Cannot locate the equipment in the network
Problem Description
I cannot locate the equipment in the network.
Corrective Action
Improper settings may cause the problems in locating the equipment in the network. Try the checklist below to detect the
cause of the problem. If the problem remains unsolved, contact your service representative.
No. Check...
Yes
No
Corrective Action
1
Is the startup page printed out? If not, wait until
Set up the proper protocols.
the communication comes online. Examine the
protocol settings listed on the startup page. Are
they correct?
Next Step
Ö
Ø
2
Print out a configuration page. Make sure that
there are not any discrepancies or inconsistencies
between the current network settings and your
network environment. Change the network
settings, if necessary. Use the Find Computer
utility from your Windows computer to locate the
equipment by its device name. Can you find the
equipment?
Set up the proper protocol if required.
Once you have located the equipment, configure
the port that it is mapped correctly to the device.
Next Step
Ö
Ø
3
4
Can you locate other computers connected to the
same network?
Check the network settings on the client computer
to make sure that they are compatible with the
network settings on the equipment.
Next Step
Ö
Ö
Ø
Check the link LED activity on the hub and/or NIC
of the equipment and the client machine. Do the
hardware components appear to be functioning
properly?
Contact your service representative.
Next Step
Ø
5
Make sure that the device name for the
Set up the NetBIOS name of the device correctly.
equipment is unique and verify that the WINS
and/or DNS server database are not causing
potential naming conflicts with the network
settings on the equipment. If necessary, change
the network settings on the equipment. After the
communication comes back online, can you see
the equipment in the network?
Next Step
Ö
Ö
Ø
6
If the network environment is using complex
subnet or supernet structures, is the IP address
used by the equipment within the network
structures range of valid addresses?
Contact your local network support specialist for
further assistance.
End
92 Locating the Equipment in the Network
6 TROUBLESHOOTING FOR NETWORK CONNECTIONS
6.TROUBLESHOOTING FOR NETWORK CONNECTIONS
„ Cannot locate the equipment with Local Discovery
Problem Description
Local Discovery cannot detect the equipment.
Corrective Action
The equipment is normally located automatically by SNMP. When the TWAIN driver, File Downloader, Address Book
Viewer, Backup/Restore Utility, or Remote Scan driver cannot automatically discover the equipment over the network, the
most likely cause is limitations of the protocols supported by the computer. In some cases, you need to add or update
network components; however, first see the checklist below to fix the problem.
No. Check...
Yes
No
Corrective Action
1
2
3
Check the SNMP version.
Is the SNMP setting configured for SNMP V3?
Check whether the SNMP V3 is available on your
environment.
Next Step
Ö
Ø
Is SNMP enabled on the equipment?
Is “public” specified for the Read Community?
Enable the SNMP (MIB) and confirm the Read
Community setting.
Next Step
Ö
Ö
Ø
Confirm that the protocol suite installed on the
client computer has been updated with the latest
software for the given operating system. If your
network only supports the IPX/SPX protocol,
make sure that the most current version of Novell
Client software is installed.
See the vendor’s Web site for information about
product updates and technical supports.
Next Step
Ø
4
5
Print an NIC Configuration page from the
equipment. Does the equipment support the same
protocol as the network?
Configure the proper protocol.
Next Step
Ö
Ø
Change the protocol settings from TopAccess, if
necessary, and reboot the equipment for the
changes to take effect. Repeat step 2. Was the
device discovered?
Next Step
End
Ø
6
7
Check the NIC Configuration page. Are the IP
address and subnet mask settings correct?
Setup the TCP/IP settings correctly.
Adjust the router settings.
Next Step
Ö
Ö
Ø
Check the router to make sure that it is not
filtering out the equipment packets. Is the router
processing equipment packets correctly?
Next Step
Ø
8
9
Can another computer within the same network
segment discover the equipment?
See the following section to fix the problem:
Next Step
Ö
Ö
Ø
Check the NIC Configuration page. Is the Unit
Serial Number part of the device name?
Contact your service representative.
Next Step
Ø
10 Check link activities on the port being used by the
equipment and the integrity of the network cable,
hub, or switch that connects the equipment to the
network. Replace any network components that
you can tell or suspect are faulty.
End
Ö
Locating the Equipment in the Network 93
6 TROUBLESHOOTING FOR NETWORK CONNECTIONS
„ Equipment does not respond to ping command
Problem Description
The equipment does not respond to a ping command.
Corrective Action
Check the network settings following the checklist below.
No. Check...
Yes
No
Corrective Action
1
Confirm that the TCP/IP protocol suite is installed
on the client computer.
Refer to the networking section of your operating
system documentation.
Next Step
Ö
Ø
2
Look at the NIC configuration page and confirm
that the TCP/IP settings are correct. Is the IP
address entered and valid? Are the Gateway and
Subnet settings correct?
Enter the correct TCP/IP settings.
Next Step
Ö
Ö
Ø
3
Reboot the equipment. Check the NIC
Configuration page that is printed out. Are the
TCP/IP settings correct?
The settings are not binding, contact your service
representative.
Next Step
Ø
4
5
Try to ping the equipment again. Did the
equipment respond to the ping?
Next Step
End
Ø
Can you ping the equipment from any other
computer within the same network? If not, the
equipment might have an IP address that is out of
range or invalid.
Contact your local network specialist for a valid IP
address for the equipment.
Next Step
Ö
Ö
Ø
6
7
Can you ping to another computer within the
same network?
Check the computer’s protocol settings to make
sure the gateway and subnet settings are correct.
Next Step
Ø
If you have customized the device name, you can
check if the NIC is functional by restoring the
default settings. When the equipment
automatically reboots and an NIC Configuration
page is printed, does the device name include the
NIC’s unit serial number?
The NIC is faulty or improperly installed. Contact
your service representative.
Next Step
Ö
Ö
Ø
8
Check link activities on the port being used by the
equipment and also the integrity of the network
cable, hub, or switch that is connecting the
equipment to the network. Replace any network
components that you suspect are faulty. Can you
ping the equipment now?
Contact your service representative.
End
94 Locating the Equipment in the Network
6 TROUBLESHOOTING FOR NETWORK CONNECTIONS
LDAP Search and Authentication Problems
„ Network shutdown occurs or touch panel disabled after LDAP search
Problem Description
After performing the LDAP search, the network shutdown occurs or the touch panel is disabled.
Corrective Action
Try the checklist below. If the problem remains unsolved, contact your service representative.
No. Check...
Yes
No
Corrective Action
1
Is the LDAP server correctly running?
Next Step
Confirm that the LDAP server is correctly running.
Ö
Ø
2
Is the LDAP server setting correctly set?
Enter the correct LDAP setting. Re-enter the
correct password carefully because it is displayed
by asterisks.
End
Ö
„ LDAP authentication takes a long time
Problem Description
It takes a long time to perform LDAP authentication on the touch panel.
Corrective Action
Try the checklist below. If the problem remains unsolved, contact your service representative.
No Check...
Yes
No
Corrective Action
1
Is the LDAP server correctly running?
Next Step
Check the LDAP server is correctly running.
Ö
Ø
2
Is the LDAP server setting correctly set?
Enter the correct LDAP setting. Especially re-
enter the correct password carefully because it
displays with asterisks.
End
Ö
LDAP Search and Authentication Problems 95
6 TROUBLESHOOTING FOR NETWORK CONNECTIONS
Printing Problems (Network Related)
Among the several ways to use the equipment in the network, the simplest one is to set the equipment in the TCP/IP
environment using a DHCP server to assign IP addresses dynamically to devices. Using the default settings also assures
an easier network implementation, although you may be required to customize the settings to accommodate them in your
particular environment.
Some common network configurations are shown below, along with the steps required to configure the equipment. If you
perform all the steps in the applicable checklist and still cannot print satisfactorily with the equipment, contact your service
representative.
y You can change the network protocol settings with the touch panel of the equipment or with TopAccess (the
Administration page).
y For the error messages that appear during the installation of the printer drivers, refer to the Software Installation
Guide.
„ SMB print and Point&Print in a Windows operating system environment
No Check...
Yes
No
Corrective Action
1
Are the IP address properties correctly set?
Next Step
Set up the IP address correctly.
Ö
Ø
2
Is the Microsoft computer name (device name)
unique?
Set up the device name correctly.
Set up the workgroup correctly.
Next Step
Ö
Ö
Ø
3
4
Is the workgroup name valid and correctly
entered?
Next Step
Ø
Is the WINS server address correctly set?
Set up the WINS server address correctly, or
enter “0.0.0.0” for the WINS server address to
disable the WINS service.
Next Step
Ö
Ö
Ö
Ø
5
6
If the client computers are located in different
segments, is the WINS service correctly
provided?
Set up the WINS server and enable it on the
equipment to allow users access from a different
segments.
Next Step
Ø
Can you see the equipment in Windows Network
Neighborhood?
See the following section to fix the problem:
Next Step
Ø
7
8
9
Were the proper printer drivers installed?
Is the driver’s port name valid?
Refer to the Software Installation Guide to
install the proper printer drivers.
Next Step
Ö
Ö
Ø
Refer to the Software Installation Guide to
configure the proper port.
Next Step
Ø
Can you print with the equipment?
See the following section to fix the problem:
End
Ö
„ Raw TCP or LPR print in a Windows operating system environment
No Check...
Yes
No
Corrective Action
1
2
3
4
Are the IP Address properties correctly set?
Next Step
Set up the IP address correctly.
Ö
Ø
Is Raw TCP print correctly set?
Next Step
Set up the Raw TCP print service correctly.
Set up the LPD print service correctly.
Ö
Ö
Ö
Ø
Is LPR/LPD print correctly set?
Next Step
Ø
Were the proper printer drivers installed?
Refer to the Software Installation Guide to
install the proper printer drivers.
Next Step
Ø
5
6
Is the Raw TCP or LPR port configured with the
correct IP address?
Refer to the Software Installation Guide to
configure the proper port.
Next Step
Ö
Ö
Ø
Can you print with the equipment?
See the following section to fix the problem:
End
96 Printing Problems (Network Related)
6 TROUBLESHOOTING FOR NETWORK CONNECTIONS
6.TROUBLESHOOTING FOR NETWORK CONNECTIONS
„ IPP print in a Windows operating system environment
No. Check...
Yes
No
Corrective Action
1
Are the IP address properties correctly set?
Next Step
Set up the IP address correctly.
Ö
Ø
2
Is the HTTP server on the equipment enabled?
Enable the HTTP server in the HTTP Network
Service.
Next Step
Ö
Ö
Ö
Ö
Ø
3
4
Is the IPP print correctly set?
Next Step
Set up the IPP print service correctly.
Ø
Were the proper printer drivers installed?
Refer to the Software Installation Guide to
install the proper printer drivers.
Next Step
Ø
5
6
Is the IPP port configured with the correct URL?
Can you print with the equipment?
Refer to the Software Installation Guide to
configure the proper port.
Next Step
Ø
See the following section to fix the problem:
End
Ö
„ Novell print in a NetWare environment
No. Check...
Yes
No
Corrective Action
1
2
3
4
5
6
7
8
Are the IPX/SPX protocols enabled? Is the correct
frame type selected?
Set up the IPX/SPX correctly.
Next Step
Ö
Ø
If applicable, did you successfully set up queue-
based print?
Set up the NetWare server properly.
Next Step
Ö
Ö
Ö
Ö
Ö
Ö
Ø
Did you configure the equipment for a NetWare
connection?
Set up the NetWare network settings correctly.
Set up the Novell print service correctly.
Next Step
Ø
Did you configure the equipment for Novell print
service?
Next Step
Ø
Were the proper printer drivers installed?
Refer to the Software Installation Guide to
install the proper printer drivers.
Next Step
Ø
Is the IPP port configured with the correct URL?
Refer to the Software Installation Guide to
configure the proper port.
Next Step
Ø
Can you see the equipment in Windows Network
Neighborhood?
Check that the SMB protocol is enabled in the
client computers.
Next Step
Ø
Can you print with the equipment?
See the following section to fix the problem.
End
Ö
Printing Problems (Network Related) 97
6 TROUBLESHOOTING FOR NETWORK CONNECTIONS
„ Macintosh environment
No. Check...
Yes
No
Corrective Action
1
2
3
Is AppleTalk enabled on the equipment?
Next Step
Enable AppleTalk.
Ö
Ø
Are the IP address properties correctly set?
Next Step
Set up the IP address correctly.
Ö
Ö
Ø
Is the equipment available in the Chooser when
you click the LaserWriter 8 printer icon?
Make sure that the AppleTalk zone is supported
by the Macintosh client.
Next Step
Ø
4
5
Can you access any other network device from
the Macintosh computer?
Refer to your Macintosh networking
documentation or contact Macintosh technical
support.
Next Step
Ö
Ö
Ø
Can another Macintosh computer on the network
print to the equipment? If so, compare the settings
to determine which need to be changed to support
print from this machine.
Refer to your Macintosh networking
documentation or contact Macintosh technical
support.
End
„ UNIX/Linux environment
No. Check...
Yes
No
Corrective Action
1
2
3
Are the IP address properties correctly set?
Next Step
Set up the IP address correctly.
Ö
Ø
Is the LPR/LPD print correctly set?
Next Step
Set up the LPD print service correctly.
Ö
Ö
Ö
Ø
Did you successfully install the UNIX/Linux filters?
Refer to the Software Installation Guide to
install UNIX/Linux filters.
Next Step
Ø
4
5
Did you successfully create and set up a print
queue?
Refer to the Software Installation Guide to
configure the print queue.
Next Step
Ø
Can you print to the equipment using LPD as the
root?
Set up UNIX/Linux access for the equipment to
enable other users to print from the Bourne shell.
Refer to your UNIX/Linux documentation for more
information.
Next Step
Ö
Ö
Ø
6
Can you ping the equipment from your computer?
Try a remote ping from another server. If you can
reach the equipment from that server, check for
conflicts between the equipment and your current
network segment.
Next Step
Ø
7
8
Is the LP Daemon functioning?
Next Step
Reload Daemon or restart the system.
Ö
Ö
Ø
Can you print with the equipment?
End
Contact your service representative.
98 Printing Problems (Network Related)
6 TROUBLESHOOTING FOR NETWORK CONNECTIONS
Network Fax (N/W-Fax) Driver Problems
This section describes the troubleshooting for the Network Fax (N/W-Fax) driver.
„ N/W-Fax Driver Installation Error Messages
For information on the installation of the N/W-Fax driver, refer to the Software Installation Guide.
‰ Setup needs to copy Windows NT files
Problem description
The wrong port type was selected from the Printer Ports dialog.
Corrective action
1. Click Cancel until the Add Printer Wizard terminates.
2. Select [Add Printer]*1 from the [File] menu in the Printers folder to start the Add Printer Wizard, and then perform the
installation again.
*1
Double-click the [Add Printer] icon for Windows 2000.
3. When the screen for selecting a port is displayed, select [Local port] to add a printer.
‰ Client software CD now required
Problem description
When adding a new printer driver, the end user did not choose the Have Disk option; instead, the user selected the printer
name from the Add Printer list.
Corrective action
1. Cancel the Add Printer Wizard.
2. Select [Add Printer]*2 from the [File] menu in the printer folder to start the Add Printer Wizard, and perform the
installation again.
*2
Double-click the [Add Printer] icon for Windows 2000.
3. When the screen for selecting a printer is displayed, select [Have Disk].
4. Select [Use Existing Driver] to add another copy of an existing driver or browse to the subdirectory that contains the
appropriate *.inf file.
‰ File *.DRV on client CD could not be found
Problem description
When adding a new printer driver, the user did not choose the Have Disk option but selected the printer name from the
Add Printer list.
Corrective action
1. Cancel the Add Printer Wizard.
2. Select [Add Printer]*3 from the [File] menu in the printer folder to start the Add Printer Wizard, and perform the
installation again.
*3
Double-click the [Add Printer] icon for Windows 2000.
3. When the screen for selecting a printer is displayed, select [Have Disk].
4. Browse to the subdirectory that contains the appropriate *.inf file.
Network Fax (N/W-Fax) Driver Problems 99
6 TROUBLESHOOTING FOR NETWORK CONNECTIONS
‰ Location does not contain information about your hardware
Problem description
The path to the *.inf file selected during driver installation is too far away. In other words, there are too many characters in
the directory path.
Corrective action
Copy the directory containing the *.inf file to the local drive and resume installation.
‰ This port is currently in use
Problem description
The driver was either opened, printing a job, or in use by another printer or application, when you attempted to delete it.
Corrective action
Make sure all print jobs have been completed before deleting a port. If there are still problems, exit all applications and try
again. Check each driver to see if another driver is using the same port. If so, first change the driver’s port setting and
delete the port.
‰ Problem with the current printer setup
Problem description
The driver was not set up properly, possibly because the installation procedure was not completed.
Corrective action
Delete the driver and either reinstall it from the Client Utilities CD-ROM or download it from this equipment.
„ N/W-Fax Driver General Errors
‰ “Could not connect to the MFP device” appears
Problem description
When users are trying to access to the properties of the N/W-Fax driver, an error message “Could not connect to the MFP
device” appears.
Corrective action
Communication between the N/W-Fax driver and this equipment failed. Make sure that this equipment is operating. If not,
turn its power ON.
Connect the N/W-Fax driver with this equipment through the TopAccess. If the connection fails, reboot the computer and
this equipment.
‰ The fax jobs are not listed on the “Logs - Transmission” screen in
TopAccess
Problem description
When confirming the fax job logs on the “Logs - Transmission” screen in TopAccess, the fax jobs that are sent are not
displayed.
Corrective action
If the relevant fax job is not included in the Log list, your transmission job may not have been performed. In this case,
search for jobs without the department code in the “JOB STATUS - FAX” on the control panel. Then, select the relevant fax
job and press the [SEND] button to resend it.
100 Network Fax (N/W-Fax) Driver Problems
6 TROUBLESHOOTING FOR NETWORK CONNECTIONS
6.TROUBLESHOOTING FOR NETWORK CONNECTIONS
‰ Fax transmission cannot be performed with a cover sheet
Problem description
In a N/W-Fax driver which is set to the IPP port, no cover sheet is output and an XL error occurs in the fax transmission
when a printer driver whose file name consists of 54 letters or more is specified for the default printer and a Fax is sent
with a cover sheet added from Microsoft Excel.
Corrective action
Set 30 letters or less for the file name of the printer driver.
Network Fax (N/W-Fax) Driver Problems 101
7.
CHECKING THE EQUIPMENT STATUS
WITH TopAccess
This chapter describes how to check the status of the equipment with TopAccess.
Error codes on print jobs ....................................................................................................................................110
Error codes on transmission and reception........................................................................................................112
Error codes on scan jobs....................................................................................................................................115
7 CHECKING THE EQUIPMENT STATUS WITH TopAccess
Hardware Status Icons on TopAccess [Device] Tab
When the equipment requires maintenance or when an error occurs with the equipment, the icons indicating the status
information appear near the graphic image of the equipment on the TopAccess [Device] tab. The following are the icons to
appear and the descriptions for them.
For details of the [Device] tab of TopAccess, refer to the TopAccess Guide.
Printer Error 1
This icon indicates a non-recommended toner cartridge is used and the equipment stopped printing.
Printer Error 2
This icon indicates:
y You need to remove paper from the exit tray of the equipment.
y You need to remove paper from the receiving tray of the Finisher.
y You need to remove the staples jammed in the Finisher.
y You need to remove the staples jammed in the Saddle Stitch unit.
y You need to clear the hole punch paper bits from the Hole Punch Unit.
y The recommended toner cartridge is not being used.
y You tried to perform saddle stitching for a printing on mixed paper sizes.
y The equipment cannot load paper from the External Large Capacity Feeder.
y The equipment cannot eject the paper to the exit tray of the equipment.
Cover Open
This icon indicates the front cover is open.
Toner Empty
This icon indicates no toner is left. It also indicates which color is empty:
Waste Toner Full
This icon indicates the waste toner box is full and requires replacing.
104 Hardware Status Icons on TopAccess [Device] Tab
7 CHECKING THE EQUIPMENT STATUS WITH TopAccess
7.CHECKING THE EQUIPMENT STATUS WITH TopAccess
Paper Empty
This icon indicates no paper is left in a drawer.
Refer to the Copying Guide.
Paper Jam
This icon indicates a paper jam occurred. It also indicates the location of the paper jam.
Staples Empty
This icon indicates no staples are left in the Finisher.
Call for Service
Contact your service representative to have the equipment inspected.
Hardware Status Icons on TopAccess [Device] Tab 105
7 CHECKING THE EQUIPMENT STATUS WITH TopAccess
Error Messages
When a message appears on the [Device] Tab of TopAccess, see the table below for the corrective action.
TopAccess Message
Front Cover Open - Please Close Cover.
Corrective Action
Close the front cover.
Paper Feeding Cover Open - Please Close Cover.
Transfer/Transport unit Open - Please Close Cover.
Large Capacity Feeder Cover Open - Please Close Cover.
Drawer Open - Please Close Cover.
Close the paper feeder cover.
Close the transfer/transport unit.
Close the Large Capacity Feeder cover.
Close the drawer.
Automatic Duplexing Unit Cover Open - Please Close Cover.
Relay Unit Cover Open - Please Close Cover.
Finisher Joint Cover Open - Please Close Cover.
Staple Door Open - Please Close Cover.
Close the automatic duplexing unit cover.
Close the Bridge Unit cover.
Close the Finisher joint cover.
Close the stapler cover.
Punch Unit Front Cover Open.
Close the Punch Unit front cover.
Close the lower tray delivery cover.
Close the lower tray front cover.
Close the Punch unit front cover.
Close the Hole Punch Unit cover.
Lower Tray Delivery Cover Open - Please Close Cover
Lower Tray Front Cover Open - Please Closer Cover
Punch Unit Front Cover Open - Please Close Cover
Hole Punch Unit Open - Please Close Cover.
Paper Jam in Auto Duplexer Unit - Please Clear Paper Path
Refer to the guidance on the touch panel to remove jammed
paper.
Paper Insertion Jam - Please Clear Paper Path
Paper Jam in Printer - Please Clear Paper Path
Paper Ejection Jam - Please Clear Paper Path
Staple Jam in Finisher - Please Clear Staple
Paper Jam in Finisher - Remove paper
Refer to the guidance on the touch panel to remove jammed
paper.
Refer to the guidance on the touch panel to remove jammed
paper.
Refer to the guidance on the touch panel to remove jammed
paper.
Remove the jammed staples from the Finisher.
See
Remove the jammed paper from the Finisher.
Staple Jam in Saddle Stitch Finisher - Please Clear Staple
Remove jammed staples from the Saddle Stitch Finisher.
See
Used Toner Container Full - Please Replace.
Toner Not Recognized - Please Check Toner.
Black Toner Empty - Please Refill.
Replace the waste toner box.
Check and adjust the toner bottle.
Replace the black toner.
See
Cyan Toner Empty - Please Refill.
Magenta Toner Empty - Please Refill.
Yellow Toner Empty - Please Refill.
Confirm waste toner box is attached
Replace the cyan toner.
Replace the magenta toner.
Replace the yellow toner.
Confirm the waste toner box is securely attached and close the
waste toner box cover.
Close duplexing unit cover
Close the duplexing unit cover.
Close receiving tray low cover
Close the low cover of the receiving tray.
Prepare a new waste toner box.
Prepare new waste toner box
TRU Box needs to be replaced (Please make a service call)
Contact your service representative for the replacement of the
TRU Box.
Automatic Document Feeder Error - Please Contact Service
Technician.
Contact your service representative.
Alignment Error in Automatic Document Feeder - Please Contact Contact your service representative.
Service Technician.
Motor Error in Automatic Document Feeder - Please Contact
Service Technician.
Contact your service representative.
I/F Error in Automatic Document Feeder - Please Contact Service Contact your service representative.
Technician.
Fatal Error - Please Contact Service Technician.
Contact your service representative.
Contact your service representative.
Contact your service representative.
Contact your service representative.
Main Motor Error - Please Contact Service Technician.
Printer Output Error - Please Contact Service Technician.
Printer Input Error - Please Contact Service Technician.
106 Error Messages
7 CHECKING THE EQUIPMENT STATUS WITH TopAccess
TopAccess Message
Corrective Action
Expired scan documents deleted from share folder.
Expired documents are deleted automatically from the “SCAN”
folder in the “SHARE_FILE” folder.
Expired Sent Fax documents deleted from share folder.
Expired Received Fax documents deleted from share folder.
Expired documents are deleted automatically from the “TXFAX”
folder in the “SHARE_FILE” folder.
Expired documents are deleted automatically from the “RXFAX”
folder in the “SHARE_FILE” folder.
Scanned documents in shared folder deleted upon user’s request. Documents in the “SCAN” folder have been deleted by a user.
Sent Fax documents in shared folder deleted upon user’s request. Documents in the “TXFAX” folder have been deleted by a user.
Received Fax documents in shared folder deleted upon user’s
request.
Documents in the “RXFAX” folder have been deleted by a user.
Failed to delete file.
The file cannot be deleted from the shared folder.
The file cannot be acquired from the shared folder.
There are documents to be deleted in a few days in e-Filing.
Failed to acquire resource.
Document(s) expire(s) in a few days.
Hard Disk space for Electronic Filing nearly full.
The hard disk has little space available. Delete unnecessary
documents to make more space.
Power failure occurred during e-Filing restoring.
The document could not be stored in e-Filing because of the
power failure.
SMTP Destination Error has been detected in the received mail.
This mail was deleted.
The equipment cannot receive the Email that does not contain the
sender’s Email address. Ask the sender to send the Email again
with the sender’s Email address.
OffRamp Destination limitation Error has been detected in the
received mail.
The equipment cannot perform the Offramp transmission to more
than 40 destinations. Ask the sender to send the Offramp
document separately for each of the 40 destinations.
Fax Unit Error has been occurred in the received mail.
The equipment cannot perform the Offramp transmission without
the optional Fax Unit.
POP3 Connection Error has been occurred in the received mail.
Make sure that the POP3 server is properly running. Make sure
that the correct IP address of the POP3 server is assigned.
POP3 Connection Timeout Error has been occurred in the
received mail.
Make sure that the network cable is correctly connected. Make
sure that the POP3 server is properly running.
POP3 Login Error has been occurred in the received mail.
Make sure that the correct login name and password are
specified.
POP3 Login Error occurred in the received mail
Make sure that the POP3 login type (Auto, POP3, APOP) is set
correctly.
File I/O Error has been occurred in this mail. The mail could not be Turn OFF then ON the power and check whether the equipment
received until File I/O is recovered.
can receive the Internet Fax. If the Internet Fax document cannot
be received, confirm that any files other than TIFF and text files
are attached in the Internet Fax.
Hard Disk space for File Share nearly full.
Domain - General Failure during Authentication
Domain - Invalid User Name or Password
Domain - Server not present in Network
Domain - User account is disabled on Server
The hard disk has little disk space available. Delete unnecessary
documents to make the hard disk space.
Verify the Network Settings again and retry connecting to the
domain controller.
Check the user name and password. Note that they are case-
sensitive.
The server is not on network or it could not be located. Also check
the DNS and DDNS settings on TopAccess.
Check the User attributes on the server. This can be verified in ->
Active Directory Users and Computers.
Domain - User account has expired and cannot be used for logon Change the account expiration date and retry again. The
expiration date can be modified from Active Directory Users and
Computers.
Domain - User account is locked and cannot be used for logon
Domain - Invalid logon hours for the User
The lockout duration could be specified in account lockout
security policy. If so, retry after the lockout duration.
The administrator has set restrictions on the logon hours. The
logon hours can be modified from Active Directory Users and
Computers.
Active Directory Domain - Clock Skew error due to difference in
Time between Server and MFP
The clocks need to be synchronized. Please check whether SNTP
is configured correctly on the equipment.
Active Directory Domain - Kerberos Ticket has expired and cannot Please confirm the validity period of the ticket set by the Kerberos
be used for Authentication server. Please retry again after the fresh ticket is issued.
Error Messages 107
7 CHECKING THE EQUIPMENT STATUS WITH TopAccess
TopAccess Message
Corrective Action
Active Directory Domain - Verification of the Ticket has failed
Verify the user name and password and try again. If the problem
persists please contact the administrator.
Active Directory Domain-The Domain specified could not be found Enter the correct domain name in network settings. If the problem
persists please contact the administrator for the correct realm
name for your server.
Information Failed User Authentication
Check Domain Name/User Name/Password
SNTP Server - Connect Error has occurred
The equipment could not connect to the SNTP Server. Check the
SNTP settings.
No IKE proposal chosen
Check the IKEv1/IPsec proposal parameters
(like encryption/authentication algorithms, DH group,
authentication methods) in MFP and peer machine.
IKE Certificate Authentication failed
Check
1. CA and user certificate in both MFP and remote peer -
certificate timestamp and IPsec Certificate template should be
valid.
2. CRL DP server name is mapped in MFP's host table or DNS
entry.
3. Certificate against CRL.
IKE Pre-shared key Authentication failed
Mismatch in IKEv1 Pre Shared Key. Check the PSK in MFP and
remote machine.
Invalid Certificate
Check the CA and user certificate in MFP and peer machine.
Check the user certificate type. Supported type is “.pfx” file only.
Check the CA certificate in MFP and peer machine.
Certificate Type unsupported
Invalid certificate authority
Certificate unavailable
Certificate has been deleted from Certificate store. Re-upload the
corresponding certificates using Security Services.
No ISAKMP SA established
Check the IKEv1/IPsec proposal parameters
(like encryption/authentication algorithms, DH group,
authentication methods) in MFP and peer machine.
Check
1. CA and user certificate in both MFP and remote peer -
certificate timestamp and IPsec Certificate template should be
valid.
2. CRL DP server name is mapped in MFP’s host table or DNS
entry.
3. Certificate against CRL.
Invalid Signature
Mismatch in Signature payload (MAC or IV). Check the CA and
user certificate in MFP and peer machine.
No IKEv2 proposal chosen
Check the IKEv2/IPsec proposal parameters
(encryption/authentication algorithms, DH group, authentication
methods) in MFP and peer machine.
IKEv2 Certificate Authentication Failed
Check
1. CA and user certificate in both MFP and remote peer -
certificate timestamp and IPsec Certificate template should be
valid.
2. CRL DP server name is mapped in MFP’s host table or DNS
entry.
3. Certificate against CRL.
IKEv2 Secret key Authentication failed
Falling Back to IKEv1
Mismatch in IKEv2 Pre Shared Key. Check the PSK in MFP and
peer machine.
Remote machine is not supporting IKEv2. Going back to use
IKEv1.
ISAKMP SA unusable (deleted)
Crypto operation failed
Restart IPsec service on Peer and retry.
If Certificates are being used, re-upload the corresponding
certificates using Security Services. Restart IPsec Service on
MFP.
Invalid key information
CA not trusted
Check IKE settings in MFP and peer.
Check the CA certificate in MFP and peer machine.
Check the CA certificate timestamp.
Authentication Method mismatch
IKE Version mismatch
Mismatch in IKE authentication type. Check the Authentication
type in MFP and peer.
Mismatch in IKE version. Check the IKE version in MFP and peer.
108 Error Messages
7 CHECKING THE EQUIPMENT STATUS WITH TopAccess
TopAccess Message
Encapsulation mode mismatch
Corrective Action
Check the IPsec mode (Transport/Tunnel) in MFP and peer.
Peer IP Address mismatch
Remote Traffic selector mismatch. Check the destination address/
port in IPsec filter.
Local IP Address mismatch
Local traffic selector mismatch. Check the source address/port in
IPsec filter.
Local ID mismatch
Check the user certificate in MFP.
Remote ID mismatch
IKEv1/IKEv2 Timed out
Check the user certificate in peer machine.
Check the network connectivity between MFP and peer machine.
Select the Flush Connections Option and retry.
It succeeded in the acquisition of the certificate
An unknown error occurred by SCEP
Timeout error
It succeeded in the acquisition of the certificate.
Verify the Network Settings again and retry generating certificates.
1) Check the IP address / FQDN of the CA server and verify the
Network Settings.
2)Increase the timeout value and retry generating certificates
again.
file save error
Try re-generating the certificates again.
SCEP operation is failed
Check the challenge phrase. It may be because of the wrong
challenge phrase.
Error Messages 109
7 CHECKING THE EQUIPMENT STATUS WITH TopAccess
Error Codes
TopAccess has the pages for the job lists; print, transmission, reception, and scan jobs. The following error codes are
shown on these pages in the [Logs] tab (successful jobs have no codes). These codes help you specify the cause of an
error you might encounter.
The error codes are also shown on the [LOG] window of the touch panel. See the following lists when you find an error
code on the touch panel.
„ Error codes on print jobs
Error Code
Problem Description
PM size error
Corrective Action
1200 dpi print jobs cannot be printed without the optional expansion
memory. Send a print job with a 600 dpi setting.
402F
4031
4032
HDD full error
Delete unnecessary private print jobs and invalid department print jobs.
Jobs other than Private print cannot be printed. Perform Private printing.
Private-print-only error
Printing data storing limitation error
Printing with its data being stored to the HDD temporarily (Proof print,
Private print, Scheduled print, etc.) cannot be performed. Perform normal
printing.
4033
4034
4035
4036
e-Filing storing limitation error
Local file storing limitation error
Printing with its data being stored to the HDD (print and e-Filing, print to
e-Filing, etc.) cannot be performed. Perform normal printing.
Network Fax or Internet Fax cannot be sent when “Local” is selected for
the destination of the file to save. Select “Remote” (SMB/FTP) for the
destination.
User authentication error
Hold-print-only error
The user performing the printing has not been authenticated or user-
registered. Perform user authentication or user registration.
4038
4039
Jobs other than Hold print cannot be printed. Perform Hold printing.
Printing other than Private and Hold not
allowed
Jobs other than Private print and Hold print cannot be printed. Perform
Private or Hold printing.
No authority to execute a job
The user has not been assigned the authority to perform this operation by
the administrator.
4040
4050
4300
4301
The connection with the LDAP server or its Ask your LDAP server administrator about it.
authority setting has something wrong.
Job execution error due to functional
restrictions
USB direct printing cannot be performed due to a functional restriction.
Contact your service technician.
File conversion error
The format of this file is not supported in the USB direct printing, or the
file is invalid. Check the file.
Double-sign encoding error
A double-sign encoding error occurred because the PDF file is encrypted
in a forbidden language or in a language not supported. Printing the file in
this function is disabled.
4310
4311
Printing not permitted
Printing is not permitted or only printing in a low resolution level is
permitted due to the encryption language of the encrypted PDF file.
Printing the file in this function is disabled.
* Permitted only when a user password is entered.
Password mismatching
The entered password is neither matched with a user password nor an
owner password. Check the password again.
4312
A221
A222
Job canceled
Power failure
(Job was canceled.)
Check whether the power cable is connected properly and it is inserted
securely. Check whether the power voltage is unstable.
Limit over error
(Black and White)
Number of prints has exceeded the one specified with the department
code and user code at the same time. Clear the limit counter.
A290
A291
A292
Limit over error
(Black and White)
Number of prints has exceeded the one specified with the user code.
Clear the limit counter.
Limit over error
(Black and White)
Number of prints has exceeded the one specified with the department
code. Clear the limit counter.
Limit over error (Color)
The number of prints has exceeded the one specified for the department
code and user code, or users (guests) are not authorized to perform color
printing. Clear the limit counter, or authorize users so that they can
perform color printing.
A2A0
110 Error Codes
7 CHECKING THE EQUIPMENT STATUS WITH TopAccess
Error Code
Problem Description
Limit over error (Color)
Corrective Action
The number of prints has exceeded the one specified for the user code,
or users (guests) are not authorized to perform color printing. Clear the
limit counter, or authorize users so that they can perform color printing.
A2A1
Limit over error (Color)
Number of prints has exceeded the one specified with the department
code. Clear the limit counter.
A2A2
Error Codes 111
7 CHECKING THE EQUIPMENT STATUS WITH TopAccess
„ Error codes on transmission and reception
Error Code
0011
Problem Description
Paper jam
Corrective Action
Clear the jammed printing paper.
0012
Original jam
Door open
Clear the jammed original.
0013
Firmly close the open door.
0020
Power interruption
Reset
Check the power interruption report.
(The transmission was canceled by pressing the [FUNCTION CLEAR]
button.)
0030
0033
Polling Error
Check polling options setup (Security Code, etc.), and check whether the
polling document exists.
0042
0050
Memory full
Line busy
Make sure that there is sufficient memory before making the call again.
Retry communications.
Security Mismatch in Relay or Mail Box
transmission
Confirm the remote party’s Security Code, system password and your
setup.
0053
Signal Error or Line Condition Error
Retry communications. Frequent failures may indicate a phone line
problem. If possible, move the unit to another line and try your
communications again.
00B0-00B5
00C0-00C4
00D0-00D2
HDD error
Retry communications. If the error still occurs, contact your service
representative.
00E8
00F0
00F1
1C10
Software failure
Retry communications. If the error still occurs, contact your service
representative.
Hardware noise
Retry communications. If the error still occurs, contact your service
representative.
System access abnormality
Insufficient memory
Turn the power OFF and then back ON. Perform the job in error again. If
the error still occurs, contact your service representative.
When there are running jobs, perform the job in error again after the
completion of the running jobs. If the error still occurs, turn the power
OFF and then back ON, and perform the job again.
1C11
1C12
1C13
Message reception error
Message transmission error
Invalid parameter
Turn the power OFF and then back ON. Perform the job in error again.
Turn the power OFF and then back ON. Perform the job in error again.
When a template is used, create the template again. If the error still
occurs, turn the power OFF and then back ON, and perform the job
again.
1C14
1C15
Exceeding file capacity
Ask your administrator to change the “Fragment Page Size” setting for
the Internet Fax setting, or reduce the number of pages and perform the
job again.
System management module access
abnormality
Turn the power OFF and then back ON. Perform the job in error again. If
the recovery is still not completed, contact your service representative.
1C20
Job control module access abnormality
Turn the power OFF and then back ON. Perform the job in error again. If
the recovery is still not completed, contact your service representative.
1C21-1C22
Disk access error
When there are running jobs, perform the job in error again after the
completion of the running jobs. If the error still occurs, turn the power
OFF and then back ON, and perform the job again.
1C30-1C33
1C40
Image conversion abnormality
Turn the power OFF and then back ON. Perform the job in error again. If
the error still occurs, contact your service representative.
HDD full failure during processing
Reduce the number of pages of the job in error and perform the job
again. Check whether the server or local disk has a sufficient space in
disk capacity.
1C60
Address Book reading failure
Memory acquiring failure
Turn the power OFF and then back ON. Perform the job in error again.
Reset the data in the Address Book and perform the job again.
If the error still occurs, contact your service representative.
1C61
1C62
Turn the power OFF and then back ON. Perform the job in error again. If
the error still occurs, contact your service representative.
1C63
1C64
1C65
1C66
Terminal IP address unset
Terminal mail address unset
SMTP address unset
Ask your administrator to set the IP address of the equipment.
Ask your administrator to set the E-mail address of the equipment.
Ask your administrator to set the SMTP server address.
Check whether the SMTP server is operating properly.
Server time-out error
112 Error Codes
7 CHECKING THE EQUIPMENT STATUS WITH TopAccess
7.CHECKING THE EQUIPMENT STATUS WITH TopAccess
Error Code
Problem Description
Corrective Action
SMTP server connection error
Ask your administrator to set the login name or password of the SMTP
server and perform the job again. Check whether the SMTP server is
operating properly.
1C69
HOST NAME error
Ask your administrator to check if there is an illegal character in the
device name. Delete the illegal character and reset the appropriate
device name.
1C6A
1C6B
1C6C
Terminal mail address error
Ask your administrator to check the SMTP Authentication method or if
there is an illegal character in the Terminal mail address. Set the correct
SMTP Authentication method or delete the illegal character in the
Terminal mail address.
Destination mail address error
Check if there is an illegal character in the Destination E-mail address.
Delete the illegal character and reset the appropriate Destination E-mail
address, then perform the job again.
System error
Turn the power OFF and then back ON. Perform the job in error again. If
the error still occurs, contact your service representative.
1C6D
1C70
1C71
1C72
SMTP client OFF
Ask your administrator to enable the SMTP Client and perform the job
again.
SMTP authentication error
POP Before SMTP error
Confirm that the login name and password are correct. If SSL is enabled,
make sure that SSL port number is correctly set.
Confirm that the POP Before SMTP settings and POP3 settings are
correct.
Internet Fax transmission failure when
processing E-mail job received
Check the “Received Internet Fax Forward” settings.
1C80
1C81
1C82
Onramp Gateway transmission failure
Check the mail box settings.
Internet Fax transmission failure when
processing Fax job received
Check the “Received Fax Forward” setting.
Power failure
Check whether the power cable is connected properly and it is inserted
securely. Check whether the power voltage is unstable.
1CC1
3A10-3A12
3A20-3A22
MIME format error
Ask the sender to resend the Email in the MIME1.0 format.
Ask the sender to resend the Email.
Email process error
Partial Email timeout error
Ask the sender to resend the Email, or change the Partial Wait time
setting.
3A30
3A40
Invalid partial Email received
HDD full error
Ask the sender to resend the partial Email in the RFC2046 format.
Ask the sender to resend the Email by separating it into several Emails. If
this error occurs because the paper empty occurs and too much waiting
jobs are stored in the hard disk, add the paper to activate other jobs.
3A50-3A52
HDD full alert
Ask the sender to resend the Email by separating it into several Emails. If
this error occurs because the paper empty occurs and too many waiting
jobs are stored in the hard disk, add the paper to activate other jobs.
3A60-3A62
3A70
Interrupt partial Email reception
Partial Email disabled
Ask your administrator to enable the Enable Partial Email setting and ask
the sender to resend the Email.
Ask your administrator to enable the Enable Partial Email setting and ask
the sender to resend the Email.
3A80-3A82
3B10-3B12
3B20-3B22
Email format error
Context-Type error
Ask the sender to resend the Email.
Ask the sender to resend the Email with attached files that are in TIFF
format.
3B30-3B32
3B40-3B42
Invalid character set
Email decode error
TIFF analysis error
Ask the sender to resend the Email in the ISO-8559-1/2 format.
Ask the sender to resend the Email.
Ask the sender to resend the Email with attached files that are in TIFF
format.
3C10-3C13
3C20-3C22
TIFF compression error
TIFF resolution error
Ask the sender to resend the Email with attached TIFF files in the MH,
MR, MMR, or JBIG compression.
Ask the sender to resend the Email with attached TIFF files whose
resolution is either 200 x 100, 200 x 200, 200 x 400, 300 x 300, or 400 x
400 dpi.
3C30-3C32
3C40-3C42
TIFF paper size error
Ask the sender to resend the Email with attached TIFF files that can be
printed on the paper available for the equipment.
3C50-3C52 Offramp transmission error
Ask the sender to specify the correct fax numbers and resend the Email.
Error Codes 113
7 CHECKING THE EQUIPMENT STATUS WITH TopAccess
Error Code
Problem Description
Offramp security error
Corrective Action
Confirm that the specified fax numbers are registered in the address
book of the equipment. If not, register the fax numbers in the address
book and ask the sender to resend the Email with the correct fax
numbers.
3C60-3C62
Power failure
Confirm that the job is recovered or not. If not, ask the sender to resend
the Email.
3C70
3D10
Destination address error
Ask your administrator whether the DNS and mail server settings are
correctly set. If they are correctly set, ask the sender to confirm that the
destination address is correct.
Exceeding maximum offramp destinations Ask the sender to specify up to 40 destinations for one offramp gateway
job. The equipment cannot perform the offramp gateway transmission for
more than 40 destinations.
3D20
3D30
3E10
Fax unit is not installed
Make sure that the Fax unit is installed, or connected correctly.
POP3 server communication error
Ask your administrator whether the POP3 server address is correctly set,
and whether the POP3 server works properly. If SSL is enabled, make
sure that SSL port number is correctly set.
POP3 server communication timeout
POP3 login error
Ask your administrator whether the POP3 server works properly and the
LAN cable is connected to the server.
3E20
3E30
3E40
Ask your administrator whether the POP3 user name and password are
set correctly.
POP3 login type error
Ask your administrator whether the POP3 login type (Auto, POP3, APOP)
is set correctly.
3F00, 3F10, File I/O error
3F20, 3F30,
Ask the sender to resend the Email. If the error still occurs, contact your
service representative.
3F40
114 Error Codes
7 CHECKING THE EQUIPMENT STATUS WITH TopAccess
7.CHECKING THE EQUIPMENT STATUS WITH TopAccess
„ Error codes on scan jobs
The error indications on scan jobs are done as follows:
y On TopAccess log list, messages indicating the status are displayed.
y On the touch panel of the equipment, error codes are displayed. See the listings below.
Error Code
Email
Problem Description
Corrective Action
Illegal Job status
A system error has occurred during sending of an
email. Retry it. If the error still occurs, contact your
service representative.
2C10, 2C12,
2C13,
2C20-2C22
Not enough memory
When there are running jobs, perform the job in error
again after the completion of the running jobs. If the
error still occurs, turn the power OFF and then back
ON, and perform the job again.
2C11, 2C62
Invalid parameter specified
Make sure that you specify the settings correctly and try
again.
2C14
2C15
Message size exceeded limit or maximum size
Disk access error
You are sending too many documents at a time. Send
your documents separately.
When there are running jobs, perform the job in error
again after the completion of the running jobs. If the
error still occurs, turn the power OFF and then back
ON, and perform the job again.
2C30-2C33
Failed to convert image file format
When this error occurs by converting the Slim PDF
format, retry the scan. If the error still occurs, specify
the general PDF format.
2C40
When this error occurs by converting other than the
Slim PDF format, turn the power OFF and then back
ON. Then retry the scan. If the error still occurs, contact
your service representative.
Encryption error. Failed to create a file
Creating a file was not allowed.
If the error still occurs after retrying, turn the power OFF
and then back ON. Then retry it.
2C43
2C44
Creating an unencrypted file was not allowed.
Configure the encryption settings and retry the failed
job.
To create an unencrypted file, consult the administrator.
Failed to read Address Book
Turn the power OFF and then back ON. Retry the job in
error. Reset the data in the Address Book and retry it. If
the error still occurs, contact your service
representative.
2C61
2C63, 2C64
Invalid Domain Address
Ask your administrator to set the IP address.
Failed to connect to SMTP server
Make sure that the SMTP server is correctly working or
the SMTP server address has been set correctly.
2C65, 2C66,
2C69
Failed to send E-Mail message
Turn the power OFF and then back ON. Retry the scan.
If the error still occurs, contact your service
representative.
2C6A
Invalid address specified in From: field
Ask your administrator to check the SMTP
Authentication method or if there is an illegal character
in the Terminal mail address. Set the correct SMTP
Authentication method or delete the illegal character in
the Terminal mail address.
2C6B
Invalid address specified in To: field
Make sure that there is an illegal character in the
Destination mail address. Delete the illegal character
and reset the appropriate Destination mail address,
then retry it.
2C6C
NIC system error
Turn the power OFF and then back ON. Retry the scan.
If the error still occurs, contact your service
representative.
2C6D
2C70
SMTP service is not available
Ask your administrator whether the SMTP service is
enabled.
Error Codes 115
7 CHECKING THE EQUIPMENT STATUS WITH TopAccess
Error Code
Problem Description
Corrective Action
SMTP authentication error
Confirm that the login name and password are correct.
If SSL is enabled, make sure that the SSL port number
is correctly set.
2C71
POP Before SMTP error
Confirm that the POP Before SMTP settings and POP3
settings are correct.
2C72
2C80
Failed to process received Email job
Failed to process received Fax job
Ask your administrator whether the Internet Fax
Received Forward is set.
Ask your administrator whether the Fax Received
Forward is set.
2C81
2CC0
Job canceled
(Job was canceled.)
Power failure occurred
Make sure that the power cable is connected properly
and it is inserted securely. Resend the job.
2CC1
Save as File
Illegal Job status
Turn the power OFF and then back ON. Retry the scan.
If the error still occurs, contact your service
representative.
2D10, 2D12,
2D13,
2D20-2D22
Not enough memory for saving the scan job
An internal error occurred
Wait for a while and retry the job. If the error still occurs,
turn the power OFF and then back ON and retry it.
2D11
2D14
2D15
Turn the power OFF and then back ON, and retry the
job. If the error still occurs, contact your service
representative.
Exceeding maximum file capacity
Failed to create directory
Divide the file into several files, or retry in a single-page
format.
Make sure that the access privilege to the storage
directory is writable and also the disk in the directory
has enough space, and then retry the job. If more than
one job is performed simultaneously, the error may
occur because the disk temporarily runs out of space. In
this case, wait for a while and retry the job. If the error
still occurs, turn the power OFF and then back ON, and
then retry it.
2D30
Failed to create file
Make sure that the access privilege to the storage
directory is writable and also the disk in the directory
has enough space, and then retry the job. If more than
one job is performed simultaneously, the error may
occur because the disk temporarily runs out of space. In
this case, wait for a while and retry the job. If the error
still occurs, turn the power OFF and then back ON, and
then retry it.
2D31, 2D33
Failed to delete file
Make sure that the access privilege to the storage
directory is writable and then retry the job. If the error
still occurs, turn the power OFF and then back ON, and
then retry it.
2D32
2D40
Failed to convert image file format
When this error occurs by converting the Slim PDF
format, retry the scan. If the error still occurs, specify
the general PDF format.
When this error occurs by converting other than the
Slim PDF format, turn the power OFF and then back
ON. Then retry the scan. If the error still occurs, contact
your service representative.
Encryption error. Failed to create a file
Creating a file was not allowed.
If the error still occurs after retrying, turn the power OFF
and then back ON. Then retry it.
2D43
2D44
Creating an unencrypted file was not allowed.
Configure the encryption settings and retry the failed
job.
To create an unencrypted file, consult the administrator.
Failed to copy file
Turn the power OFF and then back ON. Retry the scan.
If the error still occurs, contact your service
representative.
2D60
116 Error Codes
7 CHECKING THE EQUIPMENT STATUS WITH TopAccess
7.CHECKING THE EQUIPMENT STATUS WITH TopAccess
Error Code
Problem Description
Corrective Action
Failed to connect to network destination. Check
destination path.
Make sure that the network folder is shared in your
network and retry the scan. If the error still occurs, ask
your administrator to check whether the IP address or
path of the server is correct. Also make sure that the
server is operating properly.
2D62
Specified network path is invalid. Check destination
path.
Make sure that you specify the correct network folder
and retry the scan.
2D63
2D64
Logon to file server failed. Check user name and
password.
Make sure that you specify the correct user name and
password to logon the file server, or you specify correct
file server. Then retry the scan.
There are too many documents in the folder. Failed in
creating new document.
Delete the data in the local storage folder in the
equipment and retry the scan.
2D65
2D66
2D67
2D68
Failed to process your job. Insufficient storage space.
Delete the data in the destination folder in the
equipment and retry the scan.
FTP service is not available
Ask your administrator whether the FTP service is
configured correctly.
File Sharing service is not available
Ask your administrator whether the SMB protocol is
enabled.
2DA8
2DC0
The HDD is running out of capacity for the shared folder Delete the unnecessary data in HDD.
Job canceled
(Job was canceled.)
Power failure occurred
Make sure that the power cable is connected properly
and it is inserted securely. Resend the job.
2DC1
Store to e-Filing
2A10
Failed to acquire resource.
System fatal error.
Retry the scan.
2A20
2A40
Turn the power OFF and then back ON. Retry the scan.
2A50
2A51
Job canceled.
(Job was canceled.)
Power failure occurred.
Make sure that the power cable is connected properly
and it is inserted securely. Resend the job.
2B10
2B11
2B20
There was no applicable job.
Job status failed.
Retry the scan.
Retry the scan.
Retry the scan.
Failed to access file.
Message size exceeded limit or maximum size.
You are sending too many documents at a time. Send
your documents separately.
2B21
2B30
Insufficient disk space.
Delete unnecessary documents in e-Filing and try
again.
Failed to access Electronic Filing.
Make sure that the specified e-Filing or folder exists. (If
not, this error would not occur.) Delete the specified e-
Filing or folder and reset them. Retry the job in error. If
the specified e-Filing or folder cannot be deleted,
contact your service representative.
2B31
2B32
Failed to print Electronic Filing document.
Make sure that the specified document exists. (If not,
this error would not occur.) Delete the specified
document and reset them. Retry the job in error. If the
specified document cannot be deleted, contact your
service representative.
Failed to process image.
Turn the power OFF and then back ON. Retry the scan.
If the error still occurs, contact your service
representative.
2B50
2B51
Failed to process print image.
Make sure that the Function List can be printed out.
Retry the print. If the error still occurs, contact your
service representative.
The folder was renamed. A folder of the same name
already existed.
The same named folder cannot be created in the same
box.
2B60
2B70
2B71
2B80
The document was renamed. A document of the same The same named document cannot be created in the
name already existed.
same box or folder.
The storage period of e-Filing documents will expire
Check whether necessary documents are stored in e-
Filing. The documents will be deleted in a few days.
The HDD for storing e-Filing data is running out of
space.
Delete unnecessary documents in e-Filing.
Error Codes 117
7 CHECKING THE EQUIPMENT STATUS WITH TopAccess
Error Code
Problem Description
Corrective Action
Insufficient Memory.
Turn the power OFF and then back ON. Retry the scan.
If the error still occurs, contact your service
representative.
2B90
Invalid Box password specified.
Make sure that the password is correct and retry the
scan, or reset the password and retry the scan. When
this error occurs for the print of the data in the e-Filing,
perform the print with the administrator’s password. If
the recovery is still not completed or in case of invalid
password for the operation other printing (opening the
file, etc.), contact your service representative.
2BA0
Incorrect paper size or color mode
This size or color mode is not supported by e-Filing.
Check the paper size or color mode.
2BA1
2BB0
2BB1
Job canceled
(Job was canceled.)
Power failure occurred
Make sure that the power cable is connected properly
and it is inserted securely. Resend the job.
System fatal error.
Turn the power OFF and then back ON. Retry the scan.
If the error still occurs, contact your service
representative.
2BC0
Failed to acquire resource.
Power failure occurred during restoring.
Turn the power OFF and then back ON. Retry the scan.
If the error still occurs, contact your service
representative.
2BC1
2BD0
Make sure that the power cable is connected properly
and it is inserted securely. Resend the job.
2BE0
2BF0
Failed to obtain the machine parameters.
Reached the maximum number of pages.
Reached the maximum number of documents.
Reached the maximum number of folders.
Turn the power OFF and then back ON. Retry the scan.
Reduce the pages and print again.
2BF1
Delete the documents from the boxes or folders.
Delete the folders from the boxes.
2BF2
Network Settings
Syntax error, command unrecognized
Syntax error in parameters or arguments
Bad sequence of commands
Check whether the Terminal mail address and
Destination mail address are correct. Check whether
the mail server is operating properly. Turn the power
OFF and then back ON. Perform the job in error again.
2500
2501
2503
2504
Check whether the mail server is operating properly.
Turn the power OFF and then back ON.
Perform the job in error again. If the error still occurs,
contact your service representative.
Check whether the mail server is operating properly.
Turn the power OFF and then back ON.
Perform the job in error again. If the error still occurs,
contact your service representative.
Command parameter not implemented
Mailbox unavailable
Check whether the mail server is operating properly.
Turn the power OFF and then back ON.
Perform the job in error again. If the error still occurs,
contact your service representative.
Confirm that the destination Email addresses are
correct.
2550
2551
Check the access privilege for the mailbox in the mail
server.
User not local
Confirm that the destination Email addresses are
correct.
Check whether the mail server is operating properly.
Insufficient system storage
File is too large for mailbox. Confirm the mailbox size
on the mail server. Transmit again in text mode or with a
lower resolution. If the error still occurs, divide the
document and transmit again.
2552
2553
Mailbox name not allowed
Check if there is an illegal character in the mail box
name in the mail server.
118 Error Codes
8.
WHEN SOMETHING IS WRONG WITH THE
EQUIPMENT
Try the troubleshooting tips in this chapter when you think there is something wrong with the equipment.
This chapter also describes the daily care for the equipment.
General operations.............................................................................................................................................120
8 WHEN SOMETHING IS WRONG WITH THE EQUIPMENT
When You Think Something Is Wrong With the Equipment
If you think there is something wrong with the equipment, check the following items.
y To see the functions of the equipment such as copy or print, refer to their operator’s manuals (the Copying Guide
and the Printing Guide respectively).
y Checking the operations or procedures may help you solve the problems. When you have what is not clear in
operating the equipment or you think something is wrong with it, the operator’s manual for the function you are
using will be helpful.
„ General operations
Problem Description
Cause
Corrective Action
The equipment does not work at
all.
The power cord is not securely
inserted into the outlet.
Insert the power cord into the outlet until it comes to a
stop.
No icons or signs are displayed
on the touch panel.
(The MAIN POWER lamp, the
ON/OFF lamp and the [ENERGY
SAVER] button light.)
The equipment is in the Sleep mode. Press any of the [START], [COPY], [e-FILING], [SCAN],
[PRINT], [FAX] and [ENERGY SAVER] buttons to clear
the Sleep mode.
Refer to the Quick Start Guide.
No icons or signs are displayed
on the touch panel.
The power of the equipment is not
turned ON.
Press and hold the [POWER] button until the ON/OFF
lamp lights.
(Only the MAIN POWER lamp
lights.)
The equipment is in the Super Sleep
mode.
Press and hold the [POWER] button until the ON/OFF
lamp lights to clear the Super Sleep mode.
Refer to the Quick Start Guide.
The touch panel is dim.
The contrast of the touch panel is
adjusted lower.
Adjust the contrast lighter.
Refer to the MFP Management Guide.
The button does not respond to
my operation.
(“Saving energy Press START
button” appears on the touch
panel.)
The equipment is in the energy
saving mode.
Press any of the [START], [COPY], [e-FILING], [SCAN],
[PRINT], [FAX] and [ENERGY SAVER] buttons to clear
the energy saving mode.
Refer to the Quick Start Guide.
The button does not respond to
my operation.
(The MAIN POWER lamp, the
ON/OFF lamp and the [ENERGY
SAVER] button light.)
The equipment is in the Sleep mode. Press any of the [START], [COPY], [e-FILING], [SCAN],
[PRINT], [FAX] and [ENERGY SAVER] buttons to clear
the Sleep mode.
Refer to the Quick Start Guide.
The button does not respond to
my operation.
The power of the equipment is not
turned ON.
Press and hold the [POWER] button until the ON/OFF
lamp lights.
(Only the MAIN POWER lamp
lights.)
The equipment is in the Super Sleep
mode.
Press and hold the [POWER] button until the ON/OFF
lamp lights to clear the Super Sleep mode.
Refer to the Quick Start Guide.
The window “Enter Department
Code” appears.
The equipment is managed under the Enter your department code. If you do not know it, contact
department management function. the administrator of the equipment.
The window “Enter the user
The equipment is managed under the Enter your user name and password. If you do not know
name and Password” appears.
user management function.
them, contact the administrator of the equipment.
A message is displayed on the
touch panel.
Some trouble occurred in the
equipment (or the message is
displayed just for an ordinary
operation).
See the meaning of the message referring to the listing
below.
120 When You Think Something Is Wrong With the Equipment
8 WHEN SOMETHING IS WRONG WITH THE EQUIPMENT
8.WHEN SOMETHING IS WRONG WITH THE EQUIPMENT
„ Originals and paper
Problem Description
Cause
Corrective Action
The original is jammed.
The original is unavailable on the
equipment.
Check whether the original is available on the equipment.
For details, refer to Chapter 2 of the Copying Guide.
Paper is jammed.
The paper is unavailable on the
equipment.
Check whether the paper is available on the equipment.
For details, refer to Chapter 1 of the Copying Guide.
The paper size setting registered for
the equipment is inconsistent with
paper in a drawer or on the bypass
tray.
Match the size of the paper placed in the drawer or on the
bypass tray and the size registered on the equipment.
For Details, refer to Chapter 1 and 2 of the Copying
Guide.
The stack of paper exceeds the
loading line indicated on the side
guide.
Remove some paper to set it within the height limit line
indicated on the side guide.
There is too much space between the Adjust the space between the paper and the side guide or
paper and the side and end guides of the end guide not to take much spaces. If the thick paper
the drawer.
is jammed, take a little space between the paper and the
side guide.
For details, refer to Chapter 1 of the Copying Guide.
Hidden jammed paper has not been
removed.
Check the sign again on the touch panel to see where the
jam occurred.
Two or more sheets of paper are Sheets of paper are stuck together.
fed together.
Loosen the stack of paper well and set them again.
Sheets do not align when exiting. Sheets are placed in the drawer with
the wrong side up.
Check the printing side of the sheets and place them
correctly. Information about the printing side may be given
on the wrapping paper of the sheets.
If you cannot find which side is the printing side, try
printing on both sides to see if the sheets align when
exiting.
The message indicating no paper Sheets placed in the drawer are not
Remove the sheets from the drawer, align them, and
replace them.
does not disappear even after
paper is placed in the drawer.
aligned.
The side and end guides do not
Adjust the side and end guides to match the paper size.
match the paper size in the drawer.
The amount of paper placed in the
Large Capacity Feeder (optional) is
too small.
Place more than 10 sheets of paper in the Large Capacity
Feeder.
When You Think Something Is Wrong With the Equipment 121
8 WHEN SOMETHING IS WRONG WITH THE EQUIPMENT
Regular Maintenance
We recommend that you clean the following portions weekly so that the originals can always be scanned in unsoiled
conditions.
y Be careful not to scratch the portions when cleaning them.
y When cleaning the surface of the equipment, do not use such organic solvents as thinner or benzine.
-
-
This could warp the shape of the surface or leave it discolored.
When using a chemical cleaning pad to clean it, follow the instructions.
2
3
1
4
1. Scanning area (surface of the long rectangular glass)
Wipe it with a soft dry cloth. If there are still stains remaining, wipe clean with a piece of soft cloth which has been
moistened with water and then squeezed well. Do not use liquids other than water (such as alcohol, organic solvents
or neutral detergent).
2. Original glass
Wipe it with a soft dry cloth. If there are still stains remaining, wipe clean with a piece of soft cloth which has been
moistened with water and then squeezed well. Do not use liquids other than water (such as alcohol, organic solvents
or neutral detergent).
3. Guide
Clean the surface as follows depending on the extent of the staining.
-
-
-
-
Clean it with a soft cloth.
Clean it with a soft cloth lightly moistened with water.
Clean it with a soft cloth lightly moistened with alcohol, and then wipe with a dry cloth.
Clean it with a soft cloth lightly moistened with watered-down neutral detergent, wipe with a cloth moistened with
water, and then wipe with a dry cloth.
4. Platen sheet
Clean the surface as follows depending on the extent of the staining.
-
-
-
-
Clean it with a soft cloth.
Clean it with a soft cloth lightly moistened with water.
Clean it with a soft cloth lightly moistened with alcohol, and then wipe with a dry cloth.
Clean it with a soft cloth lightly moistened with watered-down neutral detergent, wipe with a cloth moistened with
water, and then wipe with a dry cloth.
122 Regular Maintenance
INDEX
A
N
C
Cleaning
[Configuration] tab ......................................................81
Copying
setting functions ......................................................74
P
Paper jam - clearing
Hole Punch Unit of the Saddle Stitch Finisher
Job Separator and Offset Tray ................................. 22
Saddle Stitch Finisher MJ-1024 and Hole Punch Unit
saddle stitch unit of the Saddle Stitch Finisher
D
Document password ...................................................79
E
e-Filing Web Utility
contents frame ........................................................88
Energy saving mode .................................................120
Error messages
Exit support tray .........................................................72
saddle stitch unit of the Saddle Stitch Finisher
Port
PostScript code ......................................................... 81
Printing environment
F
H
Private print job ......................................................... 79
I
Icons on TopAccess
R
S
Scan data
L
LDAP authentication ...................................................95
INDEX 123
Staple jam - clearing
saddle stitch unit of the Saddle Stitch Finisher
saddle stitch unit of the Saddle Stitch Finisher
T
U
124 INDEX
DP-2090/2520/3000/3570/4570
OME080178B0
MULTIFUNCTIONAL DIGITAL SYSTEMS
Troubleshooting Guide
2-17-2, HIGASHIGOTANDA, SHINAGAWA-KU, TOKYO, 141-8664, JAPAN
R081120G8702-TTEC
Ver02 2010-09
©2009, 2010 TOSHIBA TEC CORPORATION All rights reserved
|
York Air Conditioner 10 User Manual
Toshiba Air Conditioner Rav Sm802krt E User Manual
Sunbeam 2543 User Manual
Sennheiser L151 2 User Manual
Samsung Baby Monitor Snh 1010n User Manual
Samsung Aw0501m User Manual
Samsung Aw12p2 User Manual
Samsung Avmbh052ca0 User Manual
KENWOOD KDC 162U User Manual
CANON POWERSHOT S400 User Manual