Sigma
Power Pack and Battery Charger
2. Slide the ON/OFF switch [see Fig. 1 (2)]
Owners Manual
STANDARD ACCESSORIES
to the OFF position before connecting the
charger to your Digital device.
Thank you for purchasing the Camlink Sigma
Power Pack and Battery Charger. Please read
this manual carefully. It contains important
operating instructions.
This unit is specially designed for charging
batteries or power up your USB devices with
a safe, multi-function powepack and torch.
3. Insert 4 pieces of AAA rechargeable Ni-
MH into the battery compartment.
2
3
1
4. Choose the suitable connector (from
Accessory no.4 to no.7) and connecting
USB cable (Accessory no.2). Connect the
USB cable with your digital deve and the
Doutput see Fig. 1 (5)] othchrger.
5. de he FF swch ee g1 (2)]
the Oon to pere harger
nd starharginproes
ChrgIntucos
(FochAAA NiH batteries
. sert es f AA chgble Ni-
MH batteries into the battery compartment,
ensuring correct polarity ( + and - ) in
accordance with the signs in the battery
compartment.
USB e nects
the argo a
digal dece
Ule nns
argto
cpuer UB prt
CHAGEUNIT
. he OFswee g. (2)]
to the OFF position when the charger is
not in use.
4
Using as a Torch
1. Insert 4 pieces of AAA rechargeable Ni-
MH batteries into the battery compartment.
2. Press the ON/OFF button [see Fig. 1 (3)]
to turn the torch on or off.
2. Slide the ON/OFF switch [see Fig. 1 (2)]
to the ON position to operate the charger
and start the charging process.
3. When using with a operating computer
(with Charger unit & USB cable - Accessory
no.3)Connect the supplied USB cable plug
thnpkeof tcargr
ee F)]. luhe -pUSB p
o a rd USsoken your
eratimutePlse ase
your computer is installed with a standard
USB port with output 5VDC, 500mA.
4. When using indoors (with AC adaptor -
Accessory no. 6) Connect the supplied
AC adaptor plug into the DC input socket
of the charger [see Fig. 1 (1)]. Plug the AC
adaptor into household electric outlet (100-
240V AC). The switching power supply will
adjust automatically and the LED indicator
will ght itantly. Cation: The spplied
aptplie5C nd elivrs A,
d itits nto he C put soc
the r. sinan daor that doe
t meese peficonld
damage the charger.
Wrning
Adatlusfr mbile tephones
•
•
•
cluded es mut bchprior
firus
Charge only Ni-MH batteries on this
charger.
Batteries may leak or explode causing
personal injury if inserted improperly,
disposed of in fire, mixed with other battery
types, or short circuited.
OTHER ACCESSORIES
8
5
6
7
Features
•
•
•
•
Recharges 4 pieces high capity AAA
bafrom Copur USB
evice.
echargieces gh aptAAA
-Mbafrm ehd ectric
outlet (with Accessory no.6)
Recharges 4 pieces high capacity AAA
Ni-MH batteries from a Vehicle (with
Accessory no.5)
Power up your Digital devices using this
charger (such as mobile phone, iPod,
MP3, MP4, PDA/ DV/ DC/ PSP) please
see table A for compatible mobile phones
x AANH
ch
baies
DC ador
Pg for
Aadpt
f1
(3) LED torch ON/OFF switch
5. When using in a vehicle (with DC adaptor
- Accessory no.5)
(1) DC Input
(4) LED indicator
Connect the supplied DC adaptor plug
into the DC input socket of the charger
[see Fig. 1 (1)]. Plug the large end of the
cord into the 12V car lighter power socket
and the LED indicator wlight instantly.
6. The GREEN LED [see Fig. 1 (4)] will flash
idiccorrct harng. Athe
tterifucrg, tGEN
ED wctinouicating t
ckle is on. he haed batteries
e now dy fus7.pluch
and remove the batteries from the charger
when not in use.
2) ON/OFF
(5DC output
switch
•
Power up your Digital devices sing the
r dapccessoy n5) wer
p USB s usinthe AC ptor
ccess6)
•
•
gQuED orc
Batteries life well protected by timer.
Short-Circuit protection design against
damage for your USB devices
Special design LED indicator :GREEN
LED flashing - Rapid charge; GREEN LED
light ON – trickle charge
8. Begin again at Step 1 to charge the next
set of batteries.
(6) Cover & battery
•
compartment
Charging your USB devices
Specification
Charger
Input
USB output
Charge current
5v 0.5a (from usb port)
(with AAA rechargeale Ni-MH
batteries)
Safety Features
accessory no.1
5.5v 0.8 (frousb port of the charger)
aaa x 4 : (5.0.3A 1.68VA)
•
•
•
•
Negative Delta V cut-off proteon
ftimpreveovcr
hort ciotectio
AC dar
Int
Outt
Inp
Out
10240V /6z
5DC 1A
124V DC
DA
ore g, cthUSdice
put athcrgs outp
ltage hemchMake sure
e toting oenoxcd e ed
output current of the charger.
accssno
DC dpt
eversey protetio
accry 5
Size
Charging Current
Ni-MH
600mAh
Charging Time
120minutes
800mAh
1000mAh
160minutes
200minutes
AAA
300mA
Important Safety Instructions
Charging your USB devices
(with AC adaptor - Accessory no. 6)
1. Before crging, read instructions
2. This charger is intended for use with Nickel-metal-hydride rechargeae batteries
ltteptinchaother typf bats may uspeoninjury
dmato he chaer.
1. Before using, check the USB device’s int voltage and the AC daptor’s
utpvogto ee thy tcMakre e tag s
ecetred utt crrothe AC adaptor.
o neoschargeain or oisturedoor ue oy.
emve om mans whenon e.
2. Cossuitbonecoehr Acceory or .7nd onctin
Uce (Asy noCnethUSe tyodial dice
anthe DC ouut the aapt
5. eveusan sioled oanchmnoecndd b
manufacturer, otherwise this may result in a risk of fire, electric shock or injury
to persons.
3. Plug the AC adaptor into household electric outlet (100-240V AC). The switching
power supply will adjust automatically and the LED indicator will light instantly.
4. Switch on your Digital device.
6. Do not operate the charger if it has been subjected to shock or damage. Take
it to a qualified serviceman for repair.
Charging your USB devices (with DC adaptor - Accessory no. 5)
7. Do not disassemble the charger. Incorrect reassembly may result in a risk of
electric shock or fire.
1. Before using, check the USB device’s input voltage and the DC adaptor’s
output voltage to see if they match. Make sure the total loading does not
exceed the rated output current of the DC adaptor.
8. Unplug the charger from outlet before attempting any maintenance or cleaning.
9. This power unit is intended to be correctly orientated in a vertical or floor mount
position.
2. Choose a suitable connector (either Acceory no.4 or no.7) and onnecting
USB cable (Accessory no.2). Connect thSB cable to your dial device
d e Dtpof e daor.
10.The appliance is not intended for use by young children or infirm ersons
t serioYong children hld perviseto nse at they
npwh the aliance.
1.foscpg your chaer, remve the s from he nit ensure
at ey e dped f sfeSATESTRCTRDUCE
THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE
INSTRUCTIONS.
3. Pug te rge ef he ortthe 12car lighpweocet athe
Liniator liinsty.
4. Sch youigidevi
Fuse Replacement for DC adaptor To check or replace fuse, simply
rotate the plastic tip at the end of the adaptor counterclockwise.Visually
inspect fuse element. If blown or if you are unsure, replace fuse (1AMP).
|