OWNER’S MANUAL
AIR CONDITIONER
Read this owner’s manual thoroughly before operating the
appliance and keep it handy for reference at all times.
TYPE : WINDOW (INVERTER)
EN ENGLISH
LW1019IVSM
*MFL71143116*
Copyright © 2020 LG Electronics Inc. All Rights Reserved.
MFL71143116
Rev.02_100820
SAFETY INSTRUCTIONS
3
EN
SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always
read and follow all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or injure you and others.
All safety messages will follow the safety alert symbol and either the word WARNING or
CAUTION.
These words mean:
WARNING
You may be killed or seriously injured if you do not follow instructions.
CAUTION
You may be injured or cause damage to the product if you do not follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce
the chance of injury, and tell you what may happen if the instructions are not followed.
The following symbols are displayed on units.
This symbol indicates that this appliance uses a flammable refrigerant. If the refrigerant is
is leaked and exposure to an external ignition source, there is a risk of fire.
This symbol indicates that the Operation Manual should be read carefully.
This symbol indicates that a service personnel should be handling this equipment with
reference to the Installation Manual.
This symbol indicates that information is available such as the Operating Manual or
Installation Manual.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
injury to persons when using this product, follow basic precautions,
including the following:
INSTALLATION
●Before use, the appliance must be properly installed as described in this manual.
●Contact the authorized service technician for repair or maintenance of this unit.
●Contact the installer for installation of this unit.
●The air conditioner is not intended for use by young children or invalids without supervision.
●Young children should be supervised to ensure that they do not play with the air conditioner.
4
SAFETY INSTRUCTIONS
●When the power cord is to be replaced, replacement work shall be performed by authorized
personnel only using only genuine replacement parts.
●Installation work must be performed in accordance with the National Electric Code by qualified
and authorized personnel only.
●Connect to a properly rated, protected, and sized power circuit to avoid electrical overload.
●Always plug into a grounded outlet.
●Do not under any circumstances, cut or remove the third (ground) prong from the power cord.
●When installing or moving the appliance, be careful not to pinch, crush, or damage the power
cord.
●Plug in the power plug properly.
●Do not modify or extend the power cord.
●Do not start/stop operation by plugging/unplugging the power cord.
●If the cord/plug is damaged, have it replaced by an authorized service person using authorized
replacement parts.
●Use a dedicated circuit.
●Do not disassemble or modify the product.
●Adhere to all industry recommended safety procedures including the use of long-sleeved gloves
and safety glasses.
●Use care when unpacking and installing. The edges of the product may be sharp.
●Disconnect the power cord or circuit breaker before installing or servicing the appliance.
●Keep packaging materials out of the reach of children. These materials can pose a suffocation
risk to children.
●Store and install the product where it will not be exposed to temperatures below freezing or
exposed to outdoor weather conditions.
●Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any
other appliance.
OPERATION
●Use this appliance only for its intended purpose.
●Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled,
or has missing or broken parts, including a damaged cord or plug.
●Repair or immediately replace all power cords that have become frayed or otherwise damaged.
Do not use a cord that shows cracks or abrasion damage along its length or at either end.
●Do not run cord under carpets or mats where it could be stepped on and damaged.
●Keep the cord out from under heavy objects like tables or chairs.
●Do not place the power cord near a heat source.
●Do not use an adaptor or plug the product into a shared outlet.
●Do not tamper with controls.
●If you detect a strange sound, a chemical or burning smell, or smoke coming from the appliance,
unplug it immediately, and contact an LG Electronics Customer Information Center.
●Never unplug the appliance by pulling on the power cord. Always grip the plug firmly and pull
straight out from the outlet.
●Do not grasp the power cord or touch the appliance controls with wet hands.
SAFETY INSTRUCTIONS
5
EN
●If water enters the product, turn off the power at the main circuit, then unplug the product and call
for service.
●If the product has been submerged, contact an LG Electronics Customer Information Center for
instructions before resuming use.
●Unplug the product when unused for long periods.
●Unplug the product before cleaning.
●In the event of a gas leak (propane gas, etc.) do not operate this or any other appliance. Open a
window or door to ventilate the area immediately.
●This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning the use of the appliance by a person responsible for
their safety.
●The interior of the product must only be cleaned by an authorized service center or a dealer.
●Do not use solvent-based detergent on the product. Doing so can cause corrosion or damage,
GROUNDING INSTRUCTIONS
●The power cord of this appliance is equipped with a three-prong (grounding) plug. Use this with
a standard three-slot (grounding) wall power outlet to minimize the hazard of electric shock. The
sure the receptacle is properly grounded. DO NOT CUT OR REMOVE THE THIRD (GROUND)
PRONG FROM THE POWER PLUG.
- Situations when the appliance will be disconnected occasionally; Because of potential safety
hazards, we strongly discourage the use of an adapter plug. However, if you wish to use an
adapter, a TEMPORARY CONNECTION may be made. Use UL-listed adapter, available from
most local hardware stores.
The large slot in the adapter must be aligned with the large slot in the receptacle to assure a
proper polarity connection.
●Attaching the adapter ground terminal to the wall receptacle cover screw does not ground the
appliance unless the cover screw is metal, and not insulated, and the wall receptacle is grounded
to make sure the receptacle is properly grounded.
●Disconnect the power cord from the adapter, using one hand on each. Otherwise, the adapter
ground terminal might break. Do not use the appliance with a broken adapter plug.
- Situations when the appliance will be disconnected often; Do not use an adapter plug in these
situations. Unplugging the power cord frequently can lead to an eventual breakage of the
ground terminal. The wall power outlet should be replaced by a three-slot (grounding) outlet
instead.
6
SAFETY INSTRUCTIONS
CAUTION
To reduce the risk of minor or moderate injury to persons, malfunction, or
damage to the product or property when using this product, follow basic
precautions, including the following:
INSTALLATION
●Take care when installing the product that exhaust or condensation does not damage nearby
property.
●Follow installation instructions exactly to avoid excessive vibration or water leakage.
OPERATION
●This appliance is not intended for use as a precision refrigeration system. Do not use it for special
purposes such as maintaining pets, food, precision machinery, or art objects.
●When installing or moving the appliance, be careful not to pinch, crush, or damage the power
cord.
●Make sure the air inlet and outlet are free from obstructions.
●Use a soft cloth to clean the appliance. Do not use waxes, thinners, or harsh detergents.
●Do not step on or place heavy objects on top of the appliance.
●Do not drink water drained from the appliance.
are used simultaneously.
Do not expose people, animals, or plants to the cold or hot wind from the air conditioner for
extended periods of time.
●Remove the batteries if the remote control is not to be used for an extended period of time.
●Never mix different types of batteries, or old and new batteries for the remote control.
f with clean water.
consult a doctor.
●Do not recharge or disassemble the batteries.
MAINTENANCE
●Never use strong cleaning agents or solvents when cleaning the air conditioner or spray water.
Use a smooth cloth.
SAFETY INSTRUCTIONS
7
EN
REFRIGERANT (FOR R32 ONLY)
WARNING
●Do not use means to accelerate the defrosting process or to clean, other than those
recommended by the manufacturer.
●The appliance shall be stored in a room without continuously operating ignition sources (for
CAUTION
associated with older units. Please follow all precautions and advisories.
- Use caution while handling and prevent damage to unit. Do not put any holes into product for
any reason. This can cause damage to product and prevent unit from cooling.
- Maintenance and cleaning of unit should be performed by trained personnel. Failure to properly
clean unit can result in damage to the refrigeration system and or the electrical system.
- Make certain that all the air circulation/ventilation openings are free from obstruction.
-
warranties.
-
water heaters or furnaces. Also keep away from electric heaters. Damaged units should be
repaired before storage.
SAVE THESE INSTRUCTIONS
8
PRODUCT OVERVIEW
PRODUCT OVERVIEW
Exterior Parts
Interior Parts
9
3
1
2
1
4
5
8
7
6
7
6
5
4
3
2
Control Panel
Remote Control
Air Filter
Evaporator
Air Guide
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
Control Box
Condenser
Compressor
Base Pan
Air Inlet
Front Grille
Cabinet
Power Cord
Air Outlet
INSTALLATION
9
EN
INSTALLATION
WARNING
Electrical Data
●This appliance should be installed in
accordance with the National Electrical
Code.
Power cord may include a current interrupter
device. TEST and RESET buttons are provided
on the plug case. The device should be tested on
TEST button
●Use of extension cords could cause serious
injury or death.
and then the RESET button. If the TEST button
does not trip or if the RESET button will not stay
engaged, discontinue use of the air conditioner
- Do not use an extension cord with this
window air conditioner.
- Do not use surge protectors or multi-outlet
adapters with this window air conditioner.
●Never push the TEST button during
operation. Doing so can damage the plug.
for 120 V
- Do not remove, modify, or immerse this
plug. If this device trips, the cause should
be corrected before further use.
CAUTION
Use Wall Receptacle
Power Supply
●The conductors inside this cord are
surrounded by shields, which monitor
leakage current. These shields are not
grounded. Periodically examine the cord
for any damage. Do not use this product
in the event the shields become exposed.
Avoid shock hazard. This unit cannot be
user-serviced. Do not open the tamper-
resistant sealed portion. All warranties and
performance will be voided. This unit is not
intended to be used as an ON/OFF switch.
Use 15 A, time
delay fuse or 15 A,
circuit breaker.
Standard 120 V, 3-wire
grounding receptacle rated
15 A / 120 VAC / 60 Hz
10 INSTALLATION
Parts Included (Appearance May Vary)
Heatproof foam (2)
(Adhesive backed)
Foam-PE (2)
(Adhesive backed)
Foam strip
(Non-adhesive)
Right curtain
panel
L bracket (3)
Left curtain
panel
Support bracket
Type 'A' Screws
(11)
Type 'B' Screws
(5)
Tools Needed
Phillips-head
screwdriver
Adjustable wrench
Level
Gloves
Tape measure
Scissors or
Pencil
Cutting knife
INSTALLATION 11 EN
NOTE
How to Install the Unit
●All supporting parts should be secured to firm
wood, masonry, vinyl, fiberglass, or metal
To prevent vibration and noise, make sure
the unit is installed securely and firmly.
1
●This product is a window air conditioner.
As such, a standard single-hung or double-hung
window is required for proper installation.
Non-window installations, including using sleeves
or wall openings, and other installation methods
are not recommended.
Install the unit out of direct sunlight.
2
3
There should be no obstacles, such as a
fence or wall, within 20" from the back of the
cabinet because it will prevent heat radiation
of the condenser.
Restriction of outside air will greatly reduce
the cooling efficiency of the air conditioner.
Storm Window Requirements
Fence
Awning
Windows that include a storm window frame
1
Cooled air
Heat
may prevent the air conditioner from tilting
down toward the outside to drain properly.
For proper drainage, attach a 1" x 2" piece
of wood to the inner sill, trimmed to a length
which fits inside the window frame. The top
of the wood shim must be at least 3/4"
higher than the top of the storm window
frame. Attach the wood securely to the sill
with nails or screws.
radiation
About 1/4"
CAUTION
If necessary, attach another 1" x 2" wood
2
●
DO NOT cover or block any of the side and
top louvers. All side louvers of the cabinet
must remain exposed to the outside
of the structure and unobstructed.
strip flush against the back of the inner sill.
This will raise the L bracket, as shown in the
drawing.
Install the unit slightly tilted so the back is
slightly lower than the front (about 1/4").
This will force condensed water to flow to
the outside.
4
5
Wood Strip Mounted
on Top of Inner Sill
3/4" higher than
storm window frame
L Bracket
Inner Sill
Storm
Install the unit with the bottom between
30" ~60" above the floor level.
Window Frame
Wood Strip for
L bracket
Outer Sill
Nail or screw
Indoors
Window Requirements
Outdoors
●This unit is designed for installation in standard
double hung windows with actual opening
widths from 22" to 36".
The top and bottom window sashes must open
13" from the bottom of the upper sash to the
inside sill.
22" to 36"
13" min
12 INSTALLATION
Install the L bracket behind the inner
window sill as shown.
4
Preparation of Chassis
Insert the top and bottom rails of the
curtain panels into the upper and lower
panel guides.
Use the 2 type A screws provided.
1
Fasten the curtain panels to the unit with 8
type A screws.
Fasten screws behind the curtain panel.
Inner Sill
Screws
(Type A)
Outer Sill
Center Line
Left Curtain
Panel
Right
L Bracket
Curtain
Panel
Screws
(Type A)
NOTE
●The bracket helps to hold unit securely in
place. Be sure to place bracket edge flush
against back of inner sill.
Screws
(Type A)
Bottom Guide
NOTE
Unit Installation
CAUTION
● Use a long screwdriver to make installing
the screws easier.
Cut the window sash seals to the proper
2
●
During the following step, hold unit firmly until
window sash is lowered to top channel behind
side panel frames. Personal injury or property
damage may result if unit falls from window.
length. Peel off the backing and attach the
adhesive-backed foam to the underside
of the window sash and bottom of window
frame.
Set the air conditioner in the window so that
is centered. Place the air conditioner so that
front edge of the bottom guide is against the
back edge of the sill.
1
Bring the window down so that the front edge
of the upper guide is in front of the window.
Make sure that air conditioner is level or
tilting slightly to the outside.
Foam-PE
(Adhesive backed)
Open the window and draw a center line
3
on the center of the inner sill.
Then mark lines 8" to the left and right of
the center line.
Window Frame
Upper Guide
Seal
About ¼"
Bottom Guide
Center Line
Inner Sill
Room Side
8"
8"
L Bracket
INSTALLATION 13 EN
Remove the screw from the bottom right
Extend the guide panels to fill the window
opening and use 4 type B screws to secure
them to the window.
5
2
of the cabinet. Attach the support bracket
using the screw you just removed.
Secure the support bracket to the inner
window sill using a type B screw.
Screw
(Type B)
Screws
(Type B)
Cut the non-adhesive foam strip to the
proper length and insert it between the
upper window sash and the lower window
3
sash.
Support Bracket
After the air conditioner is installed,
measure the curtain panel on each side
and cut the adhesive-backed heatproof
foam to fit each panel. The size of the
panels may differ. Remove the backing
from the heatproof foam and attach the
foam to the curtain panels.
6
Foam Strip
(Non-adhesive)
To prevent broken glass or damage to
windows, on vinyl or other similarly
constructed windows, attach the L bracket
with a type A screw.
(Adhesive Backed)
4
W1
W2
Vinyl
Screw
(Type A)
W
W2
H
W1
L Bracket
H
Wood
H
Heatproof Foam
NOTE
Screw
●Heatproof foam improves the cooling
capability of the air conditioner.
(Type A)
●See the Electrical Data section for
information on attaching the power cord
to an electrical outlet.
14 OPERATION
OPERATION
Control Panel and Remote Control
Remote Control
5
6
7
8
9
8
1
Auto Clean(3 s)
4
3
7
Light Off(3 s)
10
2
4
3
2
1
NOTE
●The feature may be changed according to the type of model.
Power
Energy Saver - In this mode the
1
2
compressor and fan turn off when the set
temperature is achieved. Approximately
every 3 minutes the fan turns on to allow
the unit sensor to accurately determine if
more cooling is needed.
Press to turn the air conditioner ON or OFF.
Sleep Mode
This mode keeps operating noise to a
minimum and turns the air conditioner off
after a set time. The timer can be set from
1 to 12 hours.
●In the Sleep Mode, the setting temperature
increases by 2 °F after 30 minutes and
additional 2 °F after another 30 minutes
for a more comfortable sleep.
Cool - This mode is ideal on hot days to
cool and dehumidify the room quickly. Use
the Temp
buttons to set the desired
room temperature and use the Fan Speed
button to set the desired fan circulation
speed.
●The setting temperature increases up to
4 °F from the preset temperature.
Fan Only - In this mode the fan circulates
air but the compressor does not run. Use
the Fan Speed button to set fan speed to
High, Medium or Low. In this mode, you
cannot adjust the set temperature.
Delay ON/OFF Timer
3
Delay ON - When the air conditioner is off,
set it to automatically turn on from 1 to 24
hours later, at its previous mode and fan
settings.
Dry - This mode is ideal for rainy and
damp days to dehumidify the room rather
Delay OFF - When the air conditioner is on,
set it to automatically turn off from 1 to 24
hours later.
removed from the room by the combination
of compressor operation and the fan speed
off once the set temperature is reached.
Fan speed cannot be adjusted in Dry mode.
NOTE
●Each press of the Timer button advances
the timer by 1 hour. After the last press
the display returns to the temperature
setting.
Wi-Fi
5
Enables connection of the air conditioner to
the home Wi-Fi.
Operation Mode
4
Press the Mode button to cycle between
4 types of air conditioner operation: Energy
Saver / Cool / Fan Only / Dry.
OPERATION 15 EN
Clean Filter
6
Using the Light Off Function
The Clean Filter LED lights up to notify you
You can set the brightness of the control panel,
Temp
and
●
Press Mode button on the remote control for
3 seconds, or
together on the control panel to turn off the
Clean Filter light.
●
Press Mode and Sleep button together on
the control panel.
NOTE
●
NOTE
control panel, not the remote control.
●
Turn on/off the control panel.
●This feature is a reminder to clean the air
light turns on after 250 hours of operation.
Using the Auto Clean Function
Fan Speed
7
8
In the Cooling and Dry Mode, Moisture is
generated inside the indoor unit. This function
removes such moisture.
Press to set the fan speed to Low (F1),
Medium (F2), or High (F3).
Temperature Control
Energy Saver
●
Press
control for 3 seconds.
is displayed on the remote control.
button on the remote
The thermostat monitors room temperature
to maintain the desired temperature. The
thermostat can be set between 60 °F–86 °F
●
(16 °C–30 °C). Press
increase or decrease temperature setting.
or
arrows to
NOTE
●
If you turn off the unit, the fan continues to run
for 10 minutes and cleans the inside of the
indoor unit.
Energy Saver
9
In this mode the compressor and fan turn
off when the set temperature is achieved.
Approximately every 3 minutes the fan turns
on to allow the unit sensor to accurately
determine if more cooling is needed.
Clear
10
Cancel Sleep and Timer settings.
NOTE
●Auto Restart: If the air conditioner turns off due
to a power outage, it will restart automatically
once the power is restored, with the same
settings as were set before the unit turned off.
●Energy Saver: The unit defaults to the Energy
Saver mode each time the unit is switched on
except in Fan mode or when power is restored
after an electrical power outage.
●The remote control will not function properly if
the AC infrared sensor is exposed to direct light
or if there are obstacles between the remote
controller and the air conditioner.
16 OPERATION
Air Direction
Wireless Remote Control
Inserting Batteries
of the air conditioner’s louvers.
If the display screen of the remote control begins
to fade, replace the batteries. Insert AAA (1.5 V)
batteries before using the remote control.
Direction
Remove the cover on the back of the
remote control.
1
levers of the vertical louvers to the left or right.
With the plus and minus poles facing as
marked, insert two new AAA 1.5V batteries
2
Direction
up or down.
NOTE
●Two new batteries are supplied with the air
conditioner for use in the remote control.
●Do not use a rechargeable battery. Make sure
that the battery is new.
●In order to prevent discharge, remove the
battery from the remote control if the air
conditioner is not going to be used for an
extended period of time.
NOTE
●When the weather is extremely hot, the unit
may turn off automatically to protect the
compressor.
●Keep the remote control away from extremely
hot or humid places.
●To maintain optimal operation of the remote
control, the remote sensor should not be
exposed to direct sunlight.
Additional Features
Slinger Fan
This air conditioner is equipped with a slinger
fan. (See drawing.)
The fan’s outer ring picks up the condensed
water from the base pan if the water level gets
high enough. The water is then picked up by the
fan and expelled through the condenser, making
Ring
SMART FUNCTIONS 17 EN
Connect your smartphone to the wireless
router.
3
SMART FUNCTIONS
LG ThinQ Application
This feature is only available on models with
the
or ThinQ logo
The LG ThinQ application allows you to
communicate with the appliance using a
smartphone.
NOTE
• To verify the Wi-Fi connection, check that
LG ThinQ Application Features
icon on the control panel is lit.
• The appliance supports 2.4 GHz Wi-Fi
networks only. To check your network
frequency, contact your Internet service
provider or refer to your wireless router
manual.
Communicate with the appliance from a
smartphone using the convenient smart features.
Smart DiagnosisTM
If you experience a problem while using the
appliance,this smart diagnosis feature will help
you diagnose the problem.
• LG ThinQ is not responsible for any network
connection problems or any faults,
malfunctions, or errors caused by network
connection.
Settings
• If the appliance is having trouble connecting to
the Wi-Fi network, it may be too far from the
router. Purchase a Wi-Fi repeater (range
Allows you to set various options on the
appliance and in the application.
extender) to improve the Wi-Fi signal strength.
• The Wi-Fi connection may not connect or may
be interrupted because of the home network
environment.
NOTE
• If you change your wireless router, internet
service provider, or password, delete the
registered appliance from the LG ThinQ
application and register it again.
• The network connection may not work
properly depending on the Internet service
provider.
• The application is subject to change for
appliance improvement purposes without
notice to users.
• The surrounding wireless environment can
make the wireless network service run slowly.
• The appliance cannot be registered due to
problems with the wireless signal
• Functions may vary by model.
transmission. Unplug the appliance and wait
about a minute before trying again.
Before Using LG ThinQ Application
• If the firewall on your wireless router is
enabled, disable the firewall or add an
exception to it.
Check the distance between the appliance
and the wireless router (Wi-Fi network).
1
• If the distance between the appliance and
the wireless router is too far, the signal
strength becomes weak. It may take a
long time to register or installation may
fail.
• The wireless network name (SSID) should be
a combination of English letters and numbers.
(Do not use special characters.)
• Smartphone user interface (UI) may vary
depending on the mobile operating system
(OS) and the manufacturer.
Turn off the Mobile data or Cellular Data
on your smartphone.
2
• If the security protocol of the router is set to
WEP, you may fail to set up the network.
Please change it to other security protocols
(WPA2 is recommended) and register the
product again.
18 SMART FUNCTIONS
Using LG ThinQ to Diagnose
Issues
Installing the LG ThinQ
Application
Search for the LG ThinQ application from
the Google Play Store or Apple App Store on a
smartphone. Follow instructions to download
and install the application.
If you experience a problem with your Wi-Fi
equipped appliance, it can transmit troubleshooting
data to a smartphone using the LG ThinQ
application.
●
Launch the LG ThinQ application and select
the Smart DiagnosisTM feature in the menu.
Follow the instructions provided in the LG
ThinQ application.
Open Source Software Notice
Information
To obtain the source code under GPL, LGPL, MPL,
and other open source licenses, that is contained
com.
Using Audible Diagnosis to
Diagnose Issues
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices
are available for download.
Follow the instructions below to use the audible
diagnosis method.
LG Electronics will also provide open source code
to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of
media, shipping, and handling) upon email request
to [email protected]. This offer is valid for a
period of three years after our last shipment of this
product. This offer is valid to anyone in receipt of
this information.
●
Launch the LG ThinQ application and select the
Smart DiagnosisTM feature in the menu. Follow
the instructions for audible diagnosis provided in
the LG ThinQ application.
Plug the power plug in the outlet properly.
1
2
Place the mouthpiece of your smartphone close
to the
or
logo.
Smart DiagnosisTM
Press and hold the DIAGNOSIS [5 s] button for
5 seconds or longer while holding the smartphone
mouthpiece to the logo until the data transfer is
complete.
3
This feature is only available on models with the
or
logo.
Use this feature to help you diagnose and solve
problems with your appliance.
•
Keep the smartphone in place until the data
transfer has finished. Time remaining for data
transfer is displayed.
NOTE
●
For reasons not attributable to LGE’s
After the data transfer is complete, the diagnosis
will be displayed in the application.
4
negligence, the service may not operate due to
external factors such as, but not limited to, Wi-Fi
unavailability, Wi-Fi disconnection, local app
store policy, or app unavailability.
NOTE
●
For best results, do not move the phone while the
tones are being transmitted.
●
The feature may be subject to change without
prior notice and may have a different form
depending on where you are located.
●
Be sure to keep ambient noise to a minimum or
the phone may not correctly receive the buzzer
beeps from the indoor unit.
SMART FUNCTIONS
19 EN
FCC Notice
FCC RF Radiation Exposure
Statement
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-
located or operating in conjunction with any other
antenna or transmitter.
This following notice cover the transmitter
module contained in this product.
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses, and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged
to try to correct the interference by one or more
of the following measures:
This equipment should be installed and operated
with a minimum distance of 20 cm (7.8 inches)
between the antenna and your body. Users must
follow the specific operating instructions for
satisfying RF exposure compliance.
Wireless LAN Module Specifications
Model
LCW-010
Frequency
Range
2412 to 2462 MHz
●Reorient or relocate the receiving antenna.
●Increase the separation between the equipment
and the receiver.
Output
Power
(Max)
< 30 dBm
●Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
●Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1) This device may not cause harmful
interference and
2) This device must accept any interference
received, including interference that may
cause undesired operation.
Any changes or modifications in construction of
this device which are not expressly approved by
the party responsible for compliance could void
the user’s authority to operate the equipment.
20 MAINTENANCE
2
3
MAINTENANCE
40 °C (104 °F).
WARNING
Before cleaning or performing maintenance,
disconnect the power supply and wait until
the fan stops.
Gently shake the excess water from the
Air Filter
Dry the filter in the shade.
4
5
if cleaning is necessary. Trapped particles in the
Insert the filter into the front grille.
cooling capacity and causing an accumulation of
frost on the evaporator.
Cleaning the Air Conditioner
Cleaning the Air Filter
●Wipe the front grille and inlet grille with a cloth
dampened in a mild detergent solution.
1
●Wash the cabinet with mild soap or detergent
and lukewarm water, then polish using liquid
appliance wax.
NOTE
●
condenser coils (outside of unit) should be
checked periodically and cleaned if clogged
with soot or dirt from outside air.
●For repair and maintenance, contact an
Authorized Service Center. See the warranty
page for details or call 1-800-243-0000.
Have your model number and serial number
available. They can be found on the side of the
cabinet. Record them on page 26 for future
reference.
TROUBLESHOOTING 21 EN
TROUBLESHOOTING
Before Calling for Service
The appliance is equipped with an automatic error-monitoring system to detect and diagnose problems
at an early stage. If the appliance does not function properly or does not function at all, check the
following before you call for service.
Normal Sounds You May Hear
1
2
5
4
3
High Pitched Chatter
1
2
3
Sound of Rushing Air
At the front of the unit, you may hear the sound of rushing air being moved by the fan.
Gurgle/Hiss
Gurgling or hissing noise may be heard due to refrigerant passing through evaporator during
normal operation.
Vibration
4
5
Unit may vibrate and make noise because of poor wall or window construction or incorrect
installation.
Pinging or Swishing
Droplets of water hitting condenser during normal operation may cause pinging or swishing
sounds.
22 TROUBLESHOOTING
Problem
Possible Cause
Solutions
Make sure the air conditioner plug
is pushed completely into the outlet.
The air conditioner is unplugged.
Check the house fuse/circuit
breaker box and replace the fuse or
reset the breaker.
The fuse is blown/circuit breaker
is tripped.
If power failure occurs, turn the
mode control to off. When power is
restored, wait 3 minutes to restart
the air conditioner to prevent
Air conditioner
does not start.
Power failure.
tripping of the compressor overload.
Press the RESET button located
on the power cord plug. If the
RESET button will not stay
The current interrupter device is
tripped.
engaged, discontinue use of the air
service technician.
Make sure there are no curtains,
blinds, or furniture blocking the front
of the air conditioner.
Set the desired temperature to
a level lower than the current
temperature.
The temp control may not be set
correctly.
Air conditioner
does not cool as it
should.
weeks. See the 'MAINTENANCE'
section.
The room may have been hot.
turned on, you need to allow time
for the room to cool down.
Cold air is escaping.
registers and cold air returns.
See 'Air conditioner freezing up'
below.
Cooling coils have iced up.
obstruct the air conditioner from
properly cooling the room. Set the
mode control at High Fan or High
Cool.
Air conditioner
freezing up.
The cooling coils are iced over.
Hot, humid weather.
Water drips
outside.
This is normal.
TROUBLESHOOTING 23 EN
Problem
Possible Cause
Solutions
For proper water disposal, make
The air conditioner is not tilted to sure the air conditioner slants
Water drips
indoors.
the outside.
slightly from the cabinet front to the
rear.
This is normal for a short period in
areas with little humidity; normal for
a longer period in very humid areas.
Water collects in
base pan.
Moisture removed from air and
drains into base pan.
Air conditioner
turns on and off
rapidly.
Outside temperature extremely
hot.
Refer to installation instructions or
check with installer.
This is normal. If too loud, set to
lower FAN setting.
Air movement sound.
Noise when unit is
cooling.
Window vibration - poor
installation.
Refer to installation instructions or
check with installer.
Place remote control within 20 feet
& 120° radius of the front of the
unit.
Remote control not located
within range.
Remote sensing
deactivating
prematurely.
Remote control signal
obstructed.
Remove obstruction.
Room too cold.
Set temperature too low.
Increase set temperature.
Turn the air conditioner on.
Turn the router on.
Can't connect the
LG ThinQ App. to
the air conditioner.
Air conditioner is turned off.
Wireless router is turned off.
Move the router closer to the air
conditioner or purchase and install
a Wi-Fi repeater (signal booster).
The Wi-Fi router is too far from
the air conditioner.
The air conditioner
is not connecting
to the Wi-Fi.
You do not have permission
to use the router or it is
incompatible.
Make sure you are selecting the
correct wireless router from the list.
The router must be set to 2.4 GHz.
NOTE
●If you see "CH" in the display, please call 1-800-243-0000.
24 TROUBLESHOOTING
Wi-Fi
Problem
Possible Cause
Solutions
Delete your home Wi-Fi network
and begin the registration process
again.
The password for the Wi-Fi
network was entered incorrectly.
Turn off the Mobile data on your
smartphone before registering the
appliance.
Mobile data for your smartphone
is turned on.
The wireless network name (SSID)
should be a combination of English
letters and numbers. (Do not use
special characters.)
The wireless network name
(SSID) is set incorrectly.
Trouble connecting
appliance and
Only a 2.4 GHz router frequency
is supported. Set the wireless
router to 2.4 GHz and connect the
appliance to the wireless router. To
check the router frequency, check
with your Internet service provider
or the router manufacturer.
smartphone to
Wi-Fi network.
The router frequency is not 2.4
GHz.
If the appliance is too far from the
router, the signal may be weak
and the connection may not be
The appliance is too far from
the router.
router closer to the appliance
or purchase and install a Wi-Fi
repeater.
WARRANTY 25 EN
WARRANTY
ARBITRATION NOTICE: THIS LIMITED WARRANTY CONTAINS AN ARBITRATION PROVISION THAT
REQUIRES YOU AND LG TO RESOLVE DISPUTES BY BINDING ARBITRATION INSTEAD OF IN
COURT, UNLESS YOU CHOOSE TO OPT OUT. IN ARBITRATION, CLASS ACTIONS AND JURY
TRIALS ARE NOT PERMITTED. PLEASE SEE THE SECTION TITLED “PROCEDURE FOR RESOLVING
DISPUTES” BELOW.
WHAT THIS WARRANTY COVERS:
LG Electronics U.S.A., Inc. (“LG”) warrants your LG Room Air Conditioner ("product") against defect in
materials or workmanship under normal household use, during the warranty period set forth below, LG
will, at its option, repair or replace the product. This limited warranty is valid only to the original retail
purchaser of the product, is not assignable or transferrable to any subsequent purchaser or user, and
applies only when the product is purchased through an LG authorized dealer or distributor and used
within the United States (“U.S.”) including U.S. Territories.
NOTE
●Replacement products and repair parts may be new or factory-remanufactured and are warranted
for the remaining portion of the original unit’s warranty period or ninety (90) days, whichever is
longer. Please retain dated receipt or delivery ticket as evidence of the Date of Purchase for proof of
warranty (you may be required to submit a copy to LG or authorized representative).
WARRANTY PERIOD:
1 year from the Date of Purchase: Any internal/ functional Parts and Labor
HOW SERVICE IS HANDLED: In-Home Service
In-home service will be provided during the warranty period subject to availability within the United
States. In-home service may not be available in all areas. To receive in-home service, the product
must be unobstructed and accessible to service personnel. If during in-home service repair cannot
be completed, it may be necessary to remove, repair and return the product. If in-home service is
unavailable, LG may elect, at our option, to provide for transportation of our choice to and from a LG
authorized service center.
THIS LIMITED WARRANTY DOES NOT COVER:
●Service trips to deliver, pick up, or install the product or for instruction on product use.
●Replacing house fuses or resetting of circuit breakers, correction of house wiring or plumbing, or
correction of product installation.
●Damage or failure caused by leaky / broken / frozen water pipes, restricted drain lines, inadequate or
interrupted water supply or inadequate supply of air.
●
●Damage or failure resulting from misuse, abuse, improper installation, repair or maintenance.
●
●Damage or failure caused by incorrect electrical current, voltage, or plumbing codes.
●
unless such damage results from defects in materials or workmanship and is reported to LG within
seven (7) calendar days from the date of delivery.
●Damage or missing items to any display, open box, discounted, or refurbished product.
26 WARRANTY
●Product where the original factory serial numbers have been removed, defaced or changed in any
way.
●Repairs when product is used in other than normal and usual household use (e.g. rental, commercial
’s manual.
●The removal and reinstallation of the Product if it is installed in an inaccessible location.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING
AND WITHOUT LIMITATION TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW,
THIS WARRANTY IS LIMITED IN DURATION TO THE TERM PERIOD EXPRESSED ABOVE.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE
REMEDY FOR THE CUSTOMER. NEITHER THE MANUFACTURER NOR ITS U.S. DISTRIBUTOR
SHALL BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR
PUNITIVE DAMAGES OF ANY NATURE, INCLUDING AND WITHOUT LIMITATION TO, LOST
REVENUES OR PROFITS, OR ANY OTHER DAMAGE, WHETHER BASED IN CONTRACT, TORT,
OR OTHERWISE.
Some states do not allow the exclusion or limitation of incidental or consequential damages or
limitations on how long an implied warranty lasts, so the above exclusion or limitation may not apply
state to state.
HOW TO OBTAIN WARRANTY SERVICE & ADDITIONAL INFORMATION:
Mail to: LG Customer Information Center (ATTN: CIC)
201 James Record Road, Huntsville, AL 35824
FOR YOUR RECORDS
Write the model and serial numbers here:
Model No.
Serial No.
This information is located on a label on the side of the unit.
Dealer's Name
Date Purchased
●Staple your receipt to this page in the event you need it to prove date of purchase or for warranty
issues.
WARRANTY 27 EN
PROCEDURE FOR RESOLVING DISPUTES:
ALL DISPUTES BETWEEN YOU AND LG ARISING OUT OF OR RELATING IN ANY WAY TO THIS
LIMITED WARRANTY OR THE PRODUCT SHALL BE RESOLVED EXCLUSIVELY THROUGH
BINDING ARBITRATION, AND NOT IN A COURT OF GENERAL JURISDICTION. BINDING
ARBITRATION MEANS THAT YOU AND LG ARE EACH WAIVING THE RIGHT TO A JURY TRIAL
AND TO BRING OR PARTICIPATE IN A CLASS ACTION.
Definitions. For the purposes of this section, references to “LG” mean LG Electronics U.S.A., Inc., its
parents, subsidiaries and affiliates, and each of their officers, directors, employees, agents, beneficiaries,
predecessors in interest, successors, assigns and suppliers; references to “dispute” or “claim” shall
include any dispute, claim or controversy of any kind whatsoever (whether based in contract, tort, statute,
regulation, ordinance, fraud, misrepresentation or any other legal or equitable theory) arising out of or
relating in any way to the sale, condition or performance of the product or this Limited Warranty.
Notice of Dispute. In the event you intend to commence an arbitration proceeding, you must first notify
LG in writing at least 30 days in advance of initiating the arbitration by sending a letter to LG at LG
Electronics, USA, Inc. Attn: Legal Department- Arbitration 111 Sylvan Avenue, Englewood Cliffs, NJ 07632.
You and LG agree to engage in good faith discussions in an attempt to amicably resolve your claim.
The notice must provide your name, address, and telephone number; identify the product that is the
subject of the claim; and describe the nature of the claim and the relief being sought. If you and LG are
unable to resolve the dispute within 30 days, either party may proceed to file a claim for arbitration.
Agreement to Binding Arbitration and Class Action Waiver. Upon failure to resolve the dispute
during the 30 day period after sending written notice to LG, you and LG agree to resolve any claims
between us only by binding arbitration on an individual basis, unless you opt out as provided below.
Any dispute between you and LG shall not be combined or consolidated with a dispute involving any
other person’s or entity’s product or claim. More specifically, without limitation of the foregoing, any
dispute between you and LG shall not under any circumstances proceed as part of a class or
representative action. Instead of arbitration, either party may bring an individual action in small claims
court, but that small claims court action may not be brought on a class or representative basis.
Arbitration Rules and Procedures. To begin arbitration of a claim, either you or LG must make a written
demand for arbitration. The arbitration will be administered by the American Arbitration Association
(“AAA”) and will be conducted before a single arbitrator under the AAA’s Consumer Arbitration Rules
that are in effect at the time the arbitration is initiated (referred to as the “AAA Rules”) and under the
Send a copy of your written demand for arbitration, as well as a copy of this provision, to the AAA in
the manner described in the AAA Rules. You must also send a copy of your written demand to LG at
LG Electronics, USA, Inc. Attn: Legal Department- Arbitration 111 Sylvan Avenue, Englewood Cliffs,
NJ 07632. If there is a conflict between the AAA Rules and the rules set forth in this section, the rules
set forth in this section will govern. This arbitration provision is governed by the Federal Arbitration Act.
Judgment may be entered on the arbitrator’s award in any court of competent jurisdiction. All issues are
for the arbitrator to decide, except that issues relating to the scope and enforceability of the arbitration
provision and to the arbitrability of the dispute are for the court to decide. The arbitrator is bound by the
terms of this provision.
Governing Law. The law of the state of your residence shall govern this Limited Warranty and any
disputes between us except to the extent that such law is preempted by or inconsistent with applicable
federal law.
Fees/Costs. You do not need to pay any fee to begin an arbitration. Upon receipt of your written
demand for arbitration, LG will promptly pay all arbitration filing fees to the AAA unless you seek more
than $25,000 in damages, in which case the payment of these fees will be governed by the AAA Rules.
Except as otherwise provided for herein, LG will pay all AAA filing, administration and arbitrator fees for
any arbitration initiated in accordance with the AAA Rules and this arbitration provision. If you prevail in
28 WARRANTY
the arbitration, LG will pay your attorneys’ fees and expenses as long as they are reasonable, by
considering factors including, but not limited to, the purchase amount and claim amount. Notwithstanding
the foregoing, if applicable law allows for an award of reasonable attorneys’ fees and expenses, an
arbitrator can award them to the same extent that a court would. If the arbitrator finds either the
substance of your claim or the relief sought in the demand is frivolous or brought for an improper
purpose (as measured by the standards set forth in Federal Rule of Civil Procedure 11(b)), then the
payment of all arbitration fees will be governed by the AAA Rules. In such a situation, you agree to
reimburse LG for all monies previously disbursed by it that are otherwise your obligation to pay under
the AAA Rules. Except as otherwise provided for, LG waives any rights it may have to seek attorneys’
fees and expenses from you if LG prevails in the arbitration.
Hearings and Location. If your claim is for $25,000 or less, you may choose to have the arbitration
conducted solely on the basis of (1) documents submitted to the arbitrator, (2) through a telephonic
hearing, or (3) by an in-person hearing as established by the AAA Rules. If your claim exceeds $25,000,
the right to a hearing will be determined by the AAA Rules. Any in-person arbitration hearings will be
held at a location within the federal judicial district in which you reside unless we both agree to another
location or we agree to a telephonic arbitration.
Opt Out. You may opt out of this dispute resolution procedure. If you opt out, neither you nor LG can
require the other to participate in an arbitration proceeding. To opt out, you must send notice to LG no
later than 30 calendar days from the date of the first consumer purchaser’s purchase of the product by
either: (i) sending an e-mail to [email protected], with the subject line: “Arbitration Opt Out” or (ii) calling
1-800-980-2973. You must include in the opt out e-mail or provide by telephone: (a) your name and
address; (b) the date on which the product was purchased; (c) the product model name or model
number; and (d) the serial number (the serial number can be found (i) on the product; or (ii) online by
“Find My Model & Serial Number”).
You may only opt out of the dispute resolution procedure in the manner described above (that is, by
e-mail or telephone); no other form of notice will be effective to opt out of this dispute resolution
procedure. Opting out of this dispute resolution procedure will not affect the coverage of the Limited
Warranty in any way, and you will continue to enjoy the full benefits of the Limited Warranty. If you keep
this product and do not opt out, then you accept all terms and conditions of the arbitration provision
described above.
LG Customer Information Center
1-800-243-0000
Register your product Online!
LG Electronics Inc.
111 Sylvan Avenue, Englewood Cliffs, NJ 07632.
|