LG 55UN7000PUB User Manual

OWNER’S MANUAL  
Safety and Reference  
LED TV*  
* LG LED TV applies LCD screen with LED backlights.  
Please read this manual carefully before operating your set and retain it for future  
reference.  
43UN7300PUF  
43UN7300PUC  
43UN7300AUD  
43UN7300PUD  
43UN7100PUA  
43UN7000PUB  
43UN6950ZUA  
43UN6951ZUA  
49UN7300PUC  
49UN7300PUF  
49UN7300AUD  
49UN7300PUB  
49UN7100PUA  
49UN7000PUB  
50UN8050PUD  
50UN8000PUB  
50UN7300PUF  
50UN7300PUC  
50UN7300AUD  
50UN7300PUB  
50UN7000PUC  
50UN6950ZUF  
50UN6951ZUF  
55UN8050PUD  
55UN8000PUB  
55UN7300PUF  
55UN7300PUC  
55UN7300AUD  
55UN7300PUB  
55UN7310PUC  
55UN7100PUA  
55UN7000PUB  
55UN6950ZUA  
55UN6951ZUA  
60UN7300PUA  
60UN7310PUA  
60UN7000PUB  
60UN6950ZUA  
60UN6951ZUA  
65UN8500PUI  
65UN8500AUJ  
65UN8050PUD  
65UN8000PUB  
65UN7300PUF  
65UN7300PUC  
65UN7300AUD  
65UN7300PUB  
65UN7310PUC  
65UN7100PUA  
65UN6950ZUA  
65UN6951ZUA  
70UN7370PUC  
70UN7370AUD  
70UN7370PUB  
70UN7100PUA  
70UN7070PUA  
75UN8570PUC  
75UN7370PUE  
75UN8000PUB  
75UN8570AUD  
75UN7370AUH  
75UN7370PUB  
75UN7100PUD  
75UN7070PUC  
75UN6950ZUD  
75UN6951ZUD  
82UN8570PUC  
82UN8570PUB  
82UN8570AUD  
86UN8570PUC  
86UN8570PUB  
86UN8570AUD  
*MFL71437832*  
Copyright © 2020 LG Electronics Inc. All Rights Reserved.  
(2004-REV01)  
•ꢀ Ventilation  
Warning! Safety Instructions  
-ꢀ InstallꢀyourꢀTVꢀwhereꢀthereꢀisꢀproperꢀventilation.ꢀDoꢀnotꢀinstallꢀinꢀ  
aꢀconfinedꢀspaceꢀsuchꢀasꢀaꢀbookcase.  
-ꢀ Doꢀnotꢀinstallꢀtheꢀproductꢀonꢀaꢀcarpetꢀorꢀcushion.  
-ꢀ Doꢀnotꢀblockꢀorꢀcoverꢀtheꢀproductꢀwithꢀclothꢀorꢀotherꢀmaterialsꢀ  
whileꢀunitꢀisꢀpluggedꢀin.  
CAUTION  
•ꢀ Takeꢀcareꢀnotꢀtoꢀtouchꢀtheꢀventilationꢀopenings.ꢀWhenꢀwatchingꢀ  
theꢀTVꢀforꢀaꢀlongꢀperiod,ꢀtheꢀventilationꢀopeningsꢀmayꢀbecomeꢀhot.  
•ꢀ Protectꢀtheꢀpowerꢀcordꢀfromꢀphysicalꢀorꢀmechanicalꢀabuse,ꢀsuchꢀasꢀ  
beingꢀtwisted,ꢀkinked,ꢀpinched,ꢀclosedꢀinꢀaꢀdoor,ꢀorꢀwalkedꢀupon.ꢀ  
Payꢀparticularꢀattentionꢀtoꢀplugs,ꢀwallꢀoutlets,ꢀandꢀtheꢀpointꢀwhereꢀ  
theꢀcordꢀexitsꢀtheꢀdevice.  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION:ꢀTOꢀREDUCEꢀTHEꢀRISKꢀOFꢀELECTRICꢀSHOCKꢀDOꢀNOTꢀ  
REMOVEꢀCOVERꢀ(ORꢀBACK).ꢀNOꢀUSERꢀSERVICEABLEꢀPARTSꢀINSIDE.ꢀ  
REFERꢀTOꢀQUALIFIEDꢀSERVICEꢀPERSONNEL.  
Theꢀsymbolꢀisꢀintendedꢀtoꢀalertꢀtheꢀuserꢀtoꢀtheꢀpresenceꢀofꢀ  
uninsulatedꢀdangerousꢀvoltageꢀwithinꢀtheꢀproduct’sꢀ  
enclosureꢀthatꢀmayꢀbeꢀofꢀsufficientꢀmagnitudeꢀtoꢀconstituteꢀaꢀriskꢀ  
ofꢀelectricꢀshockꢀtoꢀpersons.  
•ꢀ DoꢀnotꢀmoveꢀtheꢀTVꢀwhilstꢀtheꢀPowerꢀcordꢀisꢀpluggedꢀin.  
•ꢀ Doꢀnotꢀuseꢀaꢀdamagedꢀorꢀlooselyꢀfittingꢀpowerꢀcord.  
•ꢀ Beꢀsureꢀtoꢀgraspꢀtheꢀplugꢀwhenꢀunpluggingꢀtheꢀpowerꢀcord.ꢀDoꢀnotꢀ  
pullꢀonꢀtheꢀpowerꢀcordꢀtoꢀunplugꢀtheꢀTV.  
•ꢀ DoꢀnotꢀconnectꢀtooꢀmanyꢀdevicesꢀtoꢀtheꢀsameꢀACꢀpowerꢀoutletꢀasꢀ  
thisꢀcouldꢀresultꢀinꢀfireꢀorꢀelectricꢀshock.  
Theꢀsymbolꢀisꢀintendedꢀtoꢀalertꢀtheꢀuserꢀtoꢀtheꢀpresenceꢀofꢀ  
importantꢀoperatingꢀandꢀmaintenanceꢀ(servicing)ꢀ  
•ꢀ Disconnecting the Device from the Main Power  
-ꢀ Theꢀpowerꢀplugꢀisꢀtheꢀdisconnectingꢀdevice.ꢀInꢀcaseꢀofꢀanꢀ  
emergency,ꢀtheꢀpowerꢀplugꢀmustꢀremainꢀreadilyꢀaccessible.  
•ꢀ DoꢀnotꢀletꢀyourꢀchildrenꢀclimbꢀorꢀclingꢀontoꢀtheꢀTV.ꢀOtherwise,ꢀtheꢀ  
TVꢀmayꢀfallꢀover,ꢀwhichꢀmayꢀcauseꢀseriousꢀinjury.  
•ꢀ Outdoor Antenna Groundingꢀ(Canꢀdifferꢀbyꢀcountry):  
-ꢀ Ifꢀanꢀoutdoorꢀantennaꢀisꢀinstalled,ꢀfollowꢀtheꢀprecautionsꢀbelow.ꢀ  
Anꢀoutdoorꢀantennaꢀsystemꢀshouldꢀnotꢀbeꢀlocatedꢀinꢀtheꢀvicinityꢀ  
ofꢀoverheadꢀpowerꢀlinesꢀorꢀotherꢀelectricꢀlightꢀorꢀpowerꢀcircuits,ꢀ  
orꢀwhereꢀitꢀcanꢀcomeꢀinꢀcontactꢀwithꢀsuchꢀpowerꢀlinesꢀorꢀcircuitsꢀ  
asꢀdeathꢀorꢀseriousꢀinjuryꢀcanꢀoccur.  
instructionsꢀinꢀtheꢀliteratureꢀaccompanyingꢀtheꢀdevice.  
WARNING:ꢀTOꢀREDUCEꢀTHEꢀRISKꢀOFꢀFIREꢀANDꢀELECTRICꢀSHOCK,ꢀDOꢀ  
NOTꢀEXPOSEꢀTHISꢀPRODUCTꢀTOꢀRAINꢀORꢀMOISTURE.  
•ꢀ TOꢀPREVENTꢀTHEꢀSPREADꢀOFꢀFIRE,ꢀKEEPꢀCANDLESꢀORꢀOTHERꢀITEMSꢀ  
WITHꢀOPENꢀFLAMESꢀAWAYꢀFROMꢀTHISꢀPRODUCTꢀATꢀALLꢀTIMES.  
•ꢀ Do not place the TV and/or remote control in the following  
environments:  
-ꢀ Keepꢀtheꢀproductꢀawayꢀfromꢀdirectꢀsunlight.  
-ꢀ Anꢀareaꢀwithꢀhighꢀhumidityꢀsuchꢀasꢀaꢀbathroom  
-ꢀ Nearꢀanyꢀheatꢀsourceꢀsuchꢀasꢀstovesꢀandꢀotherꢀdevicesꢀthatꢀ  
produceꢀheat.  
-ꢀ Nearꢀkitchenꢀcountersꢀorꢀhumidifiersꢀwhereꢀtheyꢀcanꢀeasilyꢀbeꢀ  
exposedꢀtoꢀsteamꢀorꢀoil.  
-ꢀ Anꢀareaꢀexposedꢀtoꢀrainꢀorꢀwind.  
-ꢀ Doꢀnotꢀexposeꢀtoꢀdrippingꢀorꢀsplashingꢀandꢀdoꢀnotꢀplaceꢀobjectsꢀ  
filledꢀwithꢀliquids,ꢀsuchꢀasꢀvases,ꢀcups,ꢀetc.ꢀonꢀorꢀoverꢀtheꢀ  
apparatusꢀ(e.g.,ꢀonꢀshelvesꢀaboveꢀtheꢀunit).  
-ꢀ Nearꢀflammableꢀobjectsꢀsuchꢀasꢀgasolineꢀorꢀcandles,ꢀorꢀexposeꢀ  
theꢀTVꢀtoꢀdirectꢀairꢀconditioning.  
Beꢀsureꢀtheꢀantennaꢀsystemꢀisꢀgroundedꢀtoꢀprovideꢀsomeꢀ  
protectionꢀagainstꢀvoltageꢀsurgesꢀandꢀbuilt-upꢀstaticꢀcharges.  
Sectionꢀ810ꢀofꢀtheꢀNationalꢀElectricalꢀCodeꢀ(NEC)ꢀinꢀtheꢀU.S.A.ꢀ  
providesꢀinformationꢀwithꢀrespectꢀtoꢀproperꢀgroundingꢀofꢀtheꢀ  
mastꢀandꢀsupportingꢀstructure,ꢀgroundingꢀofꢀtheꢀlead-inꢀwireꢀ  
toꢀanꢀantennaꢀdischargeꢀunit,ꢀsizeꢀofꢀgroundingꢀconductors,ꢀ  
locationꢀofꢀantennaꢀdischargeꢀunit,ꢀconnectionꢀtoꢀgroundingꢀ  
electrodesꢀandꢀrequirementsꢀforꢀtheꢀgroundingꢀelectrode.  
AntennaꢀgroundingꢀaccordingꢀtoꢀtheꢀNationalꢀElectricalꢀCode,ꢀ  
ANSI/NFPAꢀ70  
-ꢀ Doꢀnotꢀinstallꢀinꢀexcessivelyꢀdustyꢀplaces.  
Otherwise,ꢀthisꢀmayꢀresultꢀinꢀfire,ꢀelectricꢀshock,ꢀcombustion/  
explosion,ꢀmalfunctionꢀorꢀproductꢀdeformation.  
3
•ꢀ Grounding (Exceptꢀforꢀdevicesꢀwhichꢀareꢀnotꢀgrounded.)  
-ꢀ TVꢀwithꢀaꢀthree-prongꢀgroundedꢀACꢀplugꢀmustꢀbeꢀconnectedꢀtoꢀ  
aꢀthree-prongꢀgroundedꢀACꢀoutlet.ꢀEnsureꢀthatꢀyouꢀconnectꢀtheꢀ  
earthꢀgroundꢀwireꢀtoꢀpreventꢀpossibleꢀelectricꢀshock.  
•ꢀ Neverꢀtouchꢀthisꢀapparatusꢀorꢀantennaꢀduringꢀaꢀlightningꢀstorm.ꢀ  
Youꢀmayꢀbeꢀelectrocuted.  
•ꢀ MakeꢀsureꢀtheꢀpowerꢀcordꢀisꢀconnectedꢀsecurelyꢀtoꢀtheꢀTVꢀandꢀwallꢀ  
socketꢀifꢀnotꢀsecuredꢀdamageꢀtoꢀtheꢀPlugꢀandꢀsocketꢀmayꢀoccurꢀandꢀ  
inꢀextremeꢀcasesꢀaꢀfireꢀmayꢀbreakꢀout.  
•ꢀ Doꢀnotꢀinsertꢀmetallicꢀorꢀinflammableꢀobjectsꢀintoꢀtheꢀproduct.ꢀIfꢀaꢀ  
foreignꢀobjectꢀisꢀdroppedꢀintoꢀtheꢀproduct,ꢀunplugꢀtheꢀpowerꢀcordꢀ  
andꢀcontactꢀtheꢀcustomerꢀservice.  
•ꢀ Doꢀnotꢀtouchꢀtheꢀendꢀofꢀtheꢀpowerꢀcordꢀwhileꢀitꢀisꢀpluggedꢀin.ꢀYouꢀ  
mayꢀbeꢀelectrocuted.  
•ꢀ If any of the following occur, unplug the product  
immediately and contact your local customer service.  
-ꢀ Theꢀproductꢀhasꢀbeenꢀdamaged.  
-ꢀ Ifꢀwaterꢀorꢀanotherꢀsubstanceꢀentersꢀtheꢀproductꢀ(likeꢀanꢀACꢀ  
adapter,ꢀpowerꢀcord,ꢀorꢀTV).  
-ꢀ IfꢀyouꢀsmellꢀsmokeꢀorꢀotherꢀodorsꢀcomingꢀfromꢀtheꢀTV  
-ꢀ Whenꢀlightningꢀstormsꢀorꢀwhenꢀunusedꢀforꢀlongꢀperiodsꢀofꢀtime.  
EvenꢀtheꢀTVꢀisꢀturnedꢀoffꢀbyꢀremoteꢀcontrolꢀorꢀbutton,ꢀACꢀpowerꢀ  
sourceꢀisꢀconnectedꢀtoꢀtheꢀunitꢀifꢀnotꢀunpluggedꢀin.  
•ꢀ DoꢀnotꢀuseꢀhighꢀvoltageꢀelectricalꢀequipmentꢀnearꢀtheꢀTVꢀ(e.g.,ꢀaꢀ  
bugꢀzapper).ꢀThisꢀmayꢀresultꢀinꢀproductꢀmalfunction.  
•ꢀ Doꢀnotꢀattemptꢀtoꢀmodifyꢀthisꢀproductꢀinꢀanyꢀwayꢀwithoutꢀwrittenꢀ  
authorizationꢀfromꢀLGꢀElectronics.ꢀAccidentalꢀfireꢀorꢀelectricꢀshockꢀ  
canꢀoccur.ꢀContactꢀyourꢀlocalꢀcustomerꢀserviceꢀforꢀserviceꢀorꢀrepair.ꢀ  
Unauthorizedꢀmodificationꢀcouldꢀvoidꢀtheꢀuser’sꢀauthorityꢀtoꢀ  
operateꢀthisꢀproduct.  
•ꢀ NeverꢀdisassembleꢀtheꢀACꢀadapterꢀorꢀpowerꢀcord.ꢀThisꢀmayꢀresultꢀinꢀ  
fireꢀorꢀelectricꢀshock.  
•ꢀ Handleꢀtheꢀadapterꢀcarefullyꢀtoꢀavoidꢀdroppingꢀorꢀstrikingꢀit.ꢀAnꢀ  
impactꢀcouldꢀdamageꢀtheꢀadapter.  
•ꢀ Toꢀreduceꢀtheꢀriskꢀofꢀfireꢀorꢀelectricalꢀshock,ꢀdoꢀnotꢀtouchꢀtheꢀTVꢀ  
withꢀwetꢀhands.ꢀIfꢀtheꢀpowerꢀcordꢀprongsꢀareꢀwetꢀorꢀcoveredꢀwithꢀ  
dust,ꢀdryꢀtheꢀpowerꢀplugꢀcompletelyꢀorꢀwipeꢀdustꢀoff.  
•ꢀ Batteries  
-ꢀ Storeꢀtheꢀaccessoriesꢀ(battery,ꢀetc.)ꢀinꢀaꢀsafeꢀlocationꢀoutꢀofꢀtheꢀ  
reachꢀofꢀchildren.  
-ꢀ Doꢀnotꢀshortꢀcircuit,ꢀdisassemble,ꢀorꢀallowꢀtheꢀbatteriesꢀtoꢀ  
overheat.ꢀDoꢀnotꢀdisposeꢀofꢀbatteriesꢀinꢀaꢀfire.ꢀBatteriesꢀshouldꢀ  
notꢀbeꢀexposedꢀtoꢀexcessiveꢀheat.  
-ꢀ Caution:ꢀRiskꢀofꢀfireꢀorꢀexplosionꢀifꢀtheꢀbatteryꢀisꢀreplacedꢀbyꢀanꢀ  
incorrectꢀtype.  
•ꢀ Moving  
-ꢀ Whenꢀmoving,ꢀmakeꢀsureꢀtheꢀproductꢀisꢀturnedꢀoff,ꢀunplugged,ꢀ  
andꢀallꢀcablesꢀhaveꢀbeenꢀremoved.ꢀItꢀmayꢀtakeꢀ2ꢀorꢀmoreꢀpeopleꢀ  
toꢀcarryꢀlargerꢀTVs.ꢀDoꢀnotꢀpressꢀorꢀputꢀstressꢀonꢀtheꢀfrontꢀpanelꢀ  
ofꢀtheꢀTV.ꢀOtherwise,ꢀthisꢀmayꢀresultꢀinꢀproductꢀdamage,ꢀfireꢀ  
hazardꢀorꢀinjury.  
•ꢀ Keepꢀtheꢀpackingꢀanti-moistureꢀmaterialꢀorꢀvinylꢀpackingꢀoutꢀofꢀtheꢀ  
reachꢀofꢀchildren.  
•ꢀ Doꢀnotꢀallowꢀanꢀimpactꢀshock,ꢀanyꢀobjectsꢀtoꢀfallꢀintoꢀtheꢀproduct,ꢀ  
andꢀdoꢀnotꢀdropꢀanythingꢀontoꢀtheꢀscreen.  
•ꢀ Doꢀnotꢀpressꢀstronglyꢀuponꢀtheꢀpanelꢀwithꢀaꢀhandꢀorꢀaꢀsharpꢀ  
objectꢀsuchꢀasꢀaꢀnail,ꢀpencil,ꢀorꢀpen,ꢀorꢀmakeꢀaꢀscratchꢀonꢀit.ꢀItꢀmayꢀ  
cause damageꢀtoꢀscreen.  
•ꢀ Cleaning  
-ꢀ Whenꢀcleaning,ꢀunplugꢀtheꢀpowerꢀcordꢀandꢀwipeꢀgentlyꢀwithꢀaꢀ  
soft/dryꢀcloth.ꢀDoꢀnotꢀsprayꢀwaterꢀorꢀotherꢀliquidsꢀdirectlyꢀonꢀtheꢀ  
TV.ꢀDoꢀnotꢀcleanꢀyourꢀTVꢀwithꢀchemicalsꢀincludingꢀglassꢀcleaner,ꢀ  
anyꢀtypeꢀofꢀairꢀfreshener,ꢀinsecticide,ꢀlubricants,ꢀwaxꢀ(car,ꢀ  
industrial),ꢀabrasive,ꢀthinner,ꢀbenzene,ꢀalcoholꢀetc.,ꢀwhichꢀcanꢀ  
damageꢀtheꢀproductꢀand/orꢀitsꢀpanel.ꢀOtherwise,ꢀthisꢀmayꢀresultꢀ  
inꢀelectricꢀshockꢀorꢀproductꢀdamage.  
•ꢀ Useꢀonlyꢀanꢀauthorizedꢀattachmentsꢀ/ꢀaccessoriesꢀapprovedꢀbyꢀ  
LGꢀElectronics.ꢀOtherwise,ꢀthisꢀmayꢀresultꢀinꢀfire,ꢀelectricꢀshock,ꢀ  
malfunction,ꢀorꢀproductꢀdamage.  
4
Preparing  
Optional Extras  
•ꢀ WhenꢀtheꢀTVꢀisꢀturnedꢀonꢀforꢀtheꢀfirstꢀtimeꢀafterꢀbeingꢀshippedꢀ  
fromꢀtheꢀfactory,ꢀinitializationꢀofꢀtheꢀTVꢀmayꢀtakeꢀapproximatelyꢀ  
oneꢀminute.  
Optionalꢀextrasꢀcanꢀbeꢀchangedꢀorꢀmodifiedꢀforꢀqualityꢀimprovementꢀ  
withoutꢀanyꢀnotification.ꢀContactꢀyourꢀdealerꢀforꢀbuyingꢀtheseꢀitems.ꢀ  
Theseꢀdevicesꢀworkꢀonlyꢀwithꢀcertainꢀmodels.  
•ꢀ ImageꢀshownꢀmayꢀdifferꢀfromꢀyourꢀTV.  
•ꢀ YourꢀTV’sꢀOSDꢀ(OnꢀScreenꢀDisplay)ꢀmayꢀdifferꢀslightlyꢀfromꢀthatꢀ  
shownꢀinꢀthisꢀmanual.  
Theꢀmodelꢀnameꢀorꢀdesignꢀmayꢀbeꢀchangedꢀdueꢀtoꢀtheꢀmanufacturer’sꢀ  
circumstancesꢀorꢀpolicies.  
•ꢀ Theꢀavailableꢀmenusꢀandꢀoptionsꢀmayꢀdifferꢀfromꢀtheꢀinputꢀsourceꢀ  
orꢀproductꢀmodelꢀthatꢀyouꢀareꢀusing.  
Magic Remote Control  
(Dependingꢀuponꢀmodel)  
MR20GA  
•ꢀ NewꢀfeaturesꢀmayꢀbeꢀaddedꢀtoꢀthisꢀTVꢀinꢀtheꢀfuture.  
•ꢀ Theꢀdeviceꢀmustꢀbeꢀeasilyꢀaccessedꢀtoꢀaꢀlocationꢀoutletꢀnearꢀtheꢀ  
access.ꢀSomeꢀdevicesꢀareꢀnotꢀmadeꢀbyꢀturningꢀonꢀ/ꢀoffꢀbutton,ꢀ  
turningꢀoffꢀtheꢀdeviceꢀandꢀunpluggingꢀtheꢀpowerꢀcord.  
•ꢀ Theꢀitemsꢀsuppliedꢀwithꢀyourꢀproductꢀmayꢀvaryꢀdependingꢀuponꢀ  
theꢀmodel.  
•ꢀ Productꢀspecificationsꢀorꢀcontentsꢀofꢀthisꢀmanualꢀmayꢀbeꢀchangedꢀ  
withoutꢀpriorꢀnoticeꢀdueꢀtoꢀupgradeꢀofꢀproductꢀfunctions.  
•ꢀ Forꢀanꢀoptimalꢀconnection,ꢀHDMIꢀcablesꢀandꢀUSBꢀdevicesꢀshouldꢀ  
haveꢀbezelsꢀlessꢀthanꢀ10ꢀmmꢀ(0.39ꢀinches)ꢀthickꢀandꢀ18ꢀmmꢀ(0.7ꢀ  
inches)ꢀwidth.  
•ꢀ UseꢀanꢀextensionꢀcableꢀthatꢀsupportsꢀUSBꢀ2.0ꢀifꢀtheꢀUSBꢀcableꢀorꢀ  
USBꢀflashꢀdriveꢀdoesꢀnotꢀfitꢀintoꢀyourꢀTV’sꢀUSBꢀport.  
•ꢀ UseꢀaꢀcertifiedꢀcableꢀwithꢀtheꢀHDMIꢀlogoꢀattached.ꢀIfꢀyouꢀdoꢀnotꢀuseꢀ  
aꢀcertifiedꢀHDMIꢀcable,ꢀtheꢀscreenꢀmayꢀnotꢀdisplayꢀorꢀaꢀconnectionꢀ  
errorꢀmayꢀoccur.  
CheckꢀwhetherꢀyourꢀTVꢀmodelꢀsupportsꢀBluetoothꢀinꢀtheꢀWirelessꢀ  
ModuleꢀSpecificationꢀtoꢀverifyꢀwhetherꢀitꢀcanꢀbeꢀusedꢀwithꢀtheꢀMagicꢀ  
Remote.  
Wall Mounting Bracket  
(Dependingꢀuponꢀmodel)  
MakeꢀsureꢀtoꢀuseꢀscrewsꢀandꢀwallꢀmountꢀbracketꢀthatꢀmeetꢀtheꢀVESAꢀ  
standard.ꢀStandardꢀdimensionsꢀforꢀtheꢀwallꢀmountꢀkitsꢀareꢀdescribedꢀinꢀ  
theꢀfollowingꢀtable.  
•ꢀ RecommendedꢀHDMIꢀcableꢀtypesꢀ(3ꢀmꢀ(9.84ꢀfeet)ꢀorꢀless)  
A
B
-ꢀ UltraꢀHighꢀSpeedꢀHDMIꢀcable®/™  
B
B
<
*Aꢀ ꢀ10ꢀmmꢀ(0.39ꢀinches)  
=
*Bꢀ ꢀ18ꢀmmꢀ(0.7ꢀinches)  
=
A
A
43/50UN69*  
43/50UN70*  
43UN71*  
43/50UN73*  
50UN80*  
55UN69*  
49/55UN70*  
49/55UN71*  
49/55UN73*  
55UN80*  
Model  
VESA (A x B) (mm)  
Standard screw  
Number of screws  
200ꢀxꢀ200  
300ꢀxꢀ300  
M6  
4
M6  
4
Wall mount bracket LSW240B  
(optional) MSW240  
OLW480B  
MSW240  
5
•ꢀ UseꢀatꢀleastꢀtwoꢀpeopleꢀtoꢀmoveꢀaꢀlargeꢀTV.  
•ꢀ WhenꢀtransportingꢀtheꢀTVꢀbyꢀhand,ꢀholdꢀtheꢀTVꢀasꢀshownꢀinꢀtheꢀ  
followingꢀillustration.  
60/65UN69*  
60UN70*  
75UN69*  
70/75UN70*  
70/75UN71*  
70/75UN73*  
75UN80*  
65UN71*  
Model  
60/65UN73*  
65UN80*  
65UN85*  
75/82/86UN85*  
VESA (A x B) (mm)  
Standard screw  
Number of screws  
Wall mount bracket  
(optional)  
300ꢀxꢀ300  
600ꢀxꢀ400  
M6  
4
M8  
4
•ꢀ WhenꢀtransportingꢀtheꢀTV,ꢀdoꢀnotꢀexposeꢀtheꢀTVꢀtoꢀjoltsꢀorꢀ  
excessiveꢀvibration.  
•ꢀ WhenꢀtransportingꢀtheꢀTV,ꢀkeepꢀtheꢀTVꢀupright;ꢀneverꢀturnꢀtheꢀTVꢀ  
onꢀitsꢀsideꢀorꢀtiltꢀtowardsꢀtheꢀleftꢀorꢀright.  
•ꢀ WhenꢀhandlingꢀtheꢀTV,ꢀbeꢀcarefulꢀnotꢀtoꢀdamageꢀtheꢀprotrudingꢀ  
buttons.  
OLW480B  
LSW640B  
Lifting and moving the TV  
•ꢀ Avoidꢀtouchingꢀtheꢀscreenꢀatꢀallꢀtimes,ꢀasꢀthisꢀmayꢀresultꢀinꢀ  
damageꢀtoꢀtheꢀscreen.  
•ꢀ Doꢀnotꢀplaceꢀtheꢀproductꢀonꢀtheꢀfloorꢀwithꢀitsꢀfrontꢀfacingꢀ  
downꢀwithoutꢀpadding.ꢀFailureꢀtoꢀdoꢀsoꢀmayꢀresultꢀinꢀ  
damageꢀtoꢀtheꢀscreen.  
•ꢀ WhenꢀattachingꢀtheꢀstandꢀtoꢀtheꢀTVꢀset,ꢀplaceꢀtheꢀscreenꢀ  
facingꢀdownꢀonꢀaꢀcushionedꢀtableꢀorꢀflatꢀsurfaceꢀtoꢀprotectꢀ  
theꢀscreenꢀfromꢀscratches.  
WhenꢀmovingꢀorꢀliftingꢀtheꢀTV,ꢀreadꢀtheꢀfollowingꢀtoꢀpreventꢀtheꢀTVꢀ  
fromꢀbeingꢀscratchedꢀorꢀdamagedꢀandꢀforꢀsafeꢀtransportationꢀregardlessꢀ  
ofꢀitsꢀtypeꢀandꢀsize.  
•ꢀ ItꢀisꢀrecommendedꢀtoꢀmoveꢀtheꢀTVꢀinꢀtheꢀboxꢀorꢀpackingꢀmaterialꢀ  
thatꢀtheꢀTVꢀoriginallyꢀcameꢀin.  
•ꢀ BeforeꢀmovingꢀorꢀliftingꢀtheꢀTV,ꢀdisconnectꢀtheꢀpowerꢀcordꢀandꢀ  
allꢀcables.  
•ꢀ WhenꢀholdingꢀtheꢀTV,ꢀtheꢀscreenꢀshouldꢀfaceꢀawayꢀfromꢀyouꢀtoꢀ  
avoidꢀdamage.  
Mounting on the Table  
1ꢀ LiftꢀandꢀtiltꢀtheꢀTVꢀintoꢀitsꢀuprightꢀpositionꢀonꢀaꢀtable.  
•ꢀ Leaveꢀaꢀminimumꢀofꢀ10ꢀcmꢀ(4ꢀinches)ꢀspaceꢀfromꢀtheꢀwallꢀforꢀ  
properꢀventilation.  
•ꢀ HoldꢀtheꢀtopꢀandꢀbottomꢀofꢀtheꢀTVꢀframeꢀfirmly.ꢀMakeꢀsureꢀnotꢀtoꢀ  
holdꢀtheꢀtransparentꢀpart,ꢀspeaker,ꢀorꢀspeakerꢀgrilleꢀarea.  
10ꢀcm  
(4ꢀinches)  
(Dependingꢀuponꢀmodel)  
2ꢀ Connectꢀtheꢀpowerꢀcordꢀtoꢀaꢀwallꢀoutlet.  
6
•ꢀ Doꢀnotꢀapplyꢀforeignꢀsubstancesꢀ(oils,ꢀlubricants,ꢀetc.)ꢀtoꢀ  
theꢀscrewꢀpartsꢀwhenꢀassemblingꢀtheꢀproduct.  
(Doingꢀsoꢀmayꢀdamageꢀtheꢀproduct.)  
Mounting to the Wall  
•ꢀ IfꢀyouꢀinstallꢀtheꢀTVꢀonꢀaꢀstand,ꢀyouꢀneedꢀtoꢀtakeꢀactionsꢀ  
toꢀpreventꢀtheꢀproductꢀfromꢀoverturning.ꢀOtherwise,ꢀtheꢀ  
productꢀmayꢀfallꢀover,ꢀwhichꢀmayꢀcauseꢀinjury.  
•ꢀ Doꢀnotꢀuseꢀanyꢀunapprovedꢀitemsꢀtoꢀensureꢀtheꢀsafetyꢀandꢀ  
productꢀlifeꢀspan.  
•ꢀ Anyꢀdamageꢀorꢀinjuriesꢀcausedꢀbyꢀusingꢀunapprovedꢀitemsꢀ  
areꢀnotꢀcoveredꢀbyꢀtheꢀwarranty.  
•ꢀ Makeꢀsureꢀthatꢀtheꢀscrewsꢀareꢀfastenedꢀtightly.ꢀ(Ifꢀtheyꢀ  
areꢀnotꢀfastenedꢀsecurelyꢀenough,ꢀtheꢀTVꢀmayꢀtiltꢀforwardꢀ  
afterꢀbeingꢀinstalled.)  
AnꢀoptionalꢀwallꢀmountꢀcanꢀbeꢀusedꢀwithꢀyourꢀLGꢀTelevision.ꢀConsultꢀ  
withꢀyourꢀlocalꢀdealerꢀforꢀaꢀwallꢀmountꢀthatꢀsupportsꢀtheꢀVESAꢀ  
standardꢀusedꢀbyꢀyourꢀTVꢀmodel.ꢀCarefullyꢀattachꢀtheꢀwallꢀmountꢀ  
bracketꢀatꢀtheꢀrearꢀofꢀtheꢀTV.ꢀInstallꢀtheꢀwallꢀmountꢀbracketꢀonꢀaꢀsolidꢀ  
wallꢀperpendicularꢀtoꢀtheꢀfloor.ꢀIfꢀyouꢀareꢀattachingꢀtheꢀTVꢀtoꢀotherꢀ  
buildingꢀmaterials,ꢀpleaseꢀcontactꢀqualifiedꢀpersonnelꢀtoꢀinstallꢀtheꢀ  
wallꢀmount.ꢀDetailedꢀinstructionsꢀwillꢀbeꢀincludedꢀwithꢀtheꢀwallꢀmount.ꢀ  
WeꢀrecommendꢀthatꢀyouꢀuseꢀanꢀLGꢀbrandꢀwallꢀmount.ꢀTheꢀLGꢀwallꢀ  
mountꢀisꢀeasyꢀtoꢀadjustꢀorꢀtoꢀconnectꢀtheꢀcables.ꢀWhenꢀyouꢀdoꢀnotꢀuseꢀ  
LG’sꢀwallꢀmountꢀbracket,ꢀuseꢀaꢀwallꢀmountꢀbracketꢀwhereꢀtheꢀdeviceꢀisꢀ  
adequatelyꢀsecuredꢀtoꢀtheꢀwallꢀwithꢀenoughꢀspaceꢀtoꢀallowꢀconnectivityꢀ  
toꢀexternalꢀdevices.ꢀIfꢀyouꢀareꢀusingꢀaꢀnon-adjustableꢀmount,ꢀattachꢀtheꢀ  
mountꢀtoꢀtheꢀwall.ꢀAttachꢀtheꢀcablesꢀtoꢀtheꢀTVꢀfirst,ꢀthenꢀattachꢀtheꢀTVꢀ  
toꢀtheꢀmount.  
•ꢀ Doꢀnotꢀfastenꢀtheꢀscrewsꢀwithꢀexcessiveꢀforceꢀotherwiseꢀ  
theyꢀmayꢀstripꢀandꢀbecomeꢀloose.  
Securing TV to the Wall  
10ꢀcmꢀ(4ꢀinches)  
(Dependingꢀuponꢀmodel)  
1ꢀ Insertꢀandꢀtightenꢀtheꢀeye-bolts,ꢀorꢀTVꢀbracketsꢀandꢀboltsꢀonꢀtheꢀbackꢀ  
ofꢀtheꢀTV.  
(Dependingꢀuponꢀmodel)  
•ꢀ Ifꢀthereꢀareꢀboltsꢀinsertedꢀatꢀtheꢀeye-boltsꢀposition,ꢀremoveꢀtheꢀ  
boltsꢀfirst.  
•ꢀ RemoveꢀtheꢀstandꢀbeforeꢀinstallingꢀtheꢀTVꢀonꢀaꢀwallꢀ  
mountꢀbyꢀperformingꢀtheꢀstandꢀattachmentꢀinꢀreverse.  
•ꢀ Forꢀmoreꢀinformationꢀofꢀscrewsꢀandꢀwallꢀmountꢀbracket,ꢀ  
referꢀtoꢀtheꢀSeparateꢀpurchase.  
•ꢀ Ifꢀyouꢀintendꢀtoꢀmountꢀtheꢀproductꢀtoꢀaꢀwall,ꢀattachꢀVESAꢀ  
standardꢀmountingꢀinterfaceꢀ(optionalꢀparts)ꢀtoꢀtheꢀbackꢀ  
ofꢀtheꢀproduct.ꢀWhenꢀyouꢀinstallꢀtheꢀsetꢀtoꢀuseꢀtheꢀwallꢀ  
mountingꢀbracketꢀ(optionalꢀparts),ꢀfixꢀitꢀcarefullyꢀsoꢀasꢀ  
notꢀtoꢀdrop.  
2ꢀ Mountꢀtheꢀwallꢀbracketsꢀwithꢀtheꢀboltsꢀtoꢀtheꢀwall.ꢀMatchꢀtheꢀ  
locationꢀofꢀtheꢀwallꢀbracketꢀandꢀtheꢀeye-boltsꢀonꢀtheꢀrearꢀofꢀtheꢀTV.  
3ꢀ Connectꢀtheꢀeye-boltsꢀandꢀwallꢀbracketsꢀtightlyꢀwithꢀaꢀsturdyꢀrope.ꢀ  
Makeꢀsureꢀtoꢀkeepꢀtheꢀropeꢀhorizontalꢀwithꢀtheꢀflatꢀsurface.  
•ꢀ Useꢀaꢀplatformꢀorꢀcabinetꢀthatꢀisꢀstrongꢀandꢀlargeꢀenoughꢀtoꢀ  
supportꢀtheꢀTVꢀsecurely.  
•ꢀ Brackets,ꢀboltsꢀandꢀropesꢀareꢀnotꢀprovided.ꢀYouꢀcanꢀobtainꢀ  
additionalꢀaccessoriesꢀfromꢀyourꢀlocalꢀdealer.  
•ꢀ WhenꢀmountingꢀaꢀTVꢀonꢀtheꢀwall,ꢀmakeꢀsureꢀnotꢀtoꢀinstallꢀ  
theꢀTVꢀbyꢀhangingꢀtheꢀpowerꢀandꢀsignalꢀcablesꢀonꢀtheꢀ  
backꢀofꢀtheꢀTV.  
•ꢀ Doꢀnotꢀinstallꢀthisꢀproductꢀonꢀaꢀwallꢀifꢀitꢀcouldꢀbeꢀexposedꢀ  
toꢀoilꢀorꢀoilꢀmist.ꢀThisꢀmayꢀdamageꢀtheꢀproductꢀandꢀcauseꢀ  
itꢀtoꢀfall.  
7
•ꢀ Whenꢀinstallingꢀtheꢀwallꢀmountingꢀbracket,ꢀitꢀisꢀrecommendedꢀtoꢀ  
coverꢀtheꢀstandꢀholeꢀusingꢀtape,ꢀinꢀorderꢀtoꢀpreventꢀtheꢀinfluxꢀofꢀ  
dustꢀandꢀinsects,ꢀ(Dependingꢀuponꢀmodel).  
Other connections  
ConnectꢀyourꢀTVꢀtoꢀexternalꢀdevices.ꢀForꢀtheꢀbestꢀpictureꢀandꢀaudioꢀ  
quality,ꢀconnectꢀtheꢀexternalꢀdeviceꢀandꢀtheꢀTVꢀwithꢀtheꢀHDMIꢀcable.  
HDMI  
•ꢀ WhenꢀconnectingꢀtheꢀHDMIꢀcable,ꢀtheꢀproductꢀandꢀexternalꢀdevicesꢀ  
shouldꢀbeꢀturnedꢀoffꢀandꢀunplugged.  
•ꢀ HDMIꢀAudioꢀSupportedꢀFormat:  
(Dependingꢀuponꢀmodel)  
TrueꢀHDꢀ(48ꢀkHz),  
Standꢀhole  
DolbyꢀDigitalꢀ/ꢀDolbyꢀDigitalꢀPlusꢀ(32ꢀkHzꢀ/ꢀ44.1ꢀkHzꢀ/ꢀ48ꢀkHz),  
PCMꢀ(32ꢀkHzꢀ/ꢀ44.1ꢀkHzꢀ/ꢀ48ꢀkHzꢀ/ꢀ96ꢀkHzꢀ/ꢀ192ꢀkHz)  
•ꢀ  
ꢀ[Picture]ꢀ ꢀ[AdditionalꢀSettings]ꢀ ꢀ[HDMIꢀUltraꢀ  
HDꢀDeepꢀColor]  
(ForꢀUN69/UN71/UN73/UN80ꢀseries)  
-ꢀ On:ꢀSupportꢀ4Kꢀ@ꢀ50ꢀ/ꢀ60ꢀHzꢀ(4:4:4,ꢀ4:2:2,ꢀ4:2:0)  
-ꢀ Off:ꢀSupportꢀ4Kꢀ@ꢀ50ꢀ/ꢀ60ꢀHzꢀ(4:2:0)  
(ForꢀUN85ꢀseries)  
-ꢀ On:ꢀSupportꢀ4Kꢀ@ꢀ50ꢀ/ꢀ60ꢀHzꢀ(4:4:4,ꢀ4:2:2,ꢀ4:2:0),  
<3,4ꢀportꢀOnly>ꢀ4Kꢀ@ꢀ100ꢀ/ꢀ120ꢀHzꢀ(4:4:4,ꢀ4:2:2,ꢀ4:2:0)  
-ꢀ Off:ꢀSupportꢀ4Kꢀ@ꢀ50ꢀ/ꢀ60ꢀHzꢀ(4:2:0)  
IfꢀtheꢀdeviceꢀconnectedꢀtoꢀInputꢀPortꢀalsoꢀsupportsꢀUltraꢀHDꢀDeepꢀ  
Color,ꢀyourꢀpictureꢀmayꢀbeꢀclearer.ꢀHowever,ꢀifꢀtheꢀdeviceꢀdoesn’tꢀ  
supportꢀit,ꢀitꢀmayꢀnotꢀworkꢀproperly.ꢀInꢀthatꢀcase,ꢀchangeꢀtheꢀTV’sꢀ  
[HDMIꢀUltraꢀHDꢀDeepꢀColor]ꢀsettingꢀtoꢀoff.  
Connections  
-ꢀ Thisꢀfeatureꢀisꢀavailableꢀonlyꢀonꢀcertainꢀmodelsꢀwhichꢀsupportꢀ  
HDMIꢀUltraꢀHDꢀDeepꢀColor.  
YouꢀcanꢀconnectꢀvariousꢀexternalꢀdevicesꢀtoꢀtheꢀTV.ꢀForꢀmoreꢀ  
informationꢀonꢀexternalꢀdevice’sꢀconnection,ꢀreferꢀtoꢀtheꢀmanualꢀ  
providedꢀwithꢀeachꢀdevice.  
External Devices  
Supportedꢀexternalꢀdevicesꢀare:ꢀBlu-rayꢀplayer,ꢀHDꢀreceivers,ꢀDVDꢀ  
players,ꢀVCRs,ꢀaudioꢀsystems,ꢀUSBꢀstorageꢀdevices,ꢀPC,ꢀgamingꢀdevices,ꢀ  
andꢀotherꢀexternalꢀdevices.ꢀForꢀmoreꢀinformationꢀonꢀexternalꢀdevice’sꢀ  
connection,ꢀreferꢀtoꢀtheꢀmanualꢀprovidedꢀwithꢀeachꢀdevice.  
Antenna/Cable  
Connectꢀanꢀantenna,ꢀcable,ꢀorꢀcableꢀboxꢀtoꢀwatchꢀTVꢀwhileꢀreferringꢀtoꢀ  
theꢀfollowing.ꢀTheꢀillustrationsꢀmayꢀdifferꢀfromꢀtheꢀactualꢀitemsꢀandꢀanꢀ  
RFꢀcableꢀisꢀoptional.  
•ꢀ IfꢀyouꢀrecordꢀaꢀTVꢀprogramꢀonꢀaꢀBlu-ray/DVDꢀrecorderꢀorꢀVCR,ꢀmakeꢀ  
sureꢀtoꢀconnectꢀtheꢀTVꢀsignalꢀinputꢀcableꢀtoꢀtheꢀTVꢀthroughꢀaꢀDVDꢀ  
recorderꢀorꢀVCR.ꢀForꢀmoreꢀinformationꢀaboutꢀrecording,ꢀreferꢀtoꢀtheꢀ  
manualꢀprovidedꢀwithꢀtheꢀconnectedꢀdevice.  
•ꢀ MakeꢀsureꢀnotꢀtoꢀbendꢀtheꢀcopperꢀwireꢀofꢀtheꢀRFꢀcable.  
•ꢀ Theꢀexternalꢀdeviceꢀconnectionsꢀshownꢀmayꢀdifferꢀslightlyꢀfromꢀ  
illustrationsꢀinꢀaꢀmanual.  
•ꢀ ConnectꢀexternalꢀdevicesꢀtoꢀtheꢀTVꢀregardlessꢀaboutꢀtheꢀorderꢀofꢀ  
theꢀTVꢀport.  
Copperꢀwire  
•ꢀ Completeꢀallꢀconnectionsꢀbetweenꢀdevices,ꢀandꢀthenꢀconnectꢀtheꢀ  
powerꢀcordꢀtoꢀtheꢀpowerꢀoutletꢀtoꢀpreventꢀdamageꢀtoꢀyourꢀTV.  
•ꢀ Useꢀaꢀsignalꢀsplitterꢀtoꢀuseꢀ2ꢀTVsꢀorꢀmore.  
•ꢀ DTVꢀAudioꢀSupportedꢀCodec:ꢀMPEG,ꢀDolbyꢀDigital  
•ꢀ ThisꢀTVꢀcannotꢀreceiveꢀULTRAꢀHDꢀ(3840ꢀxꢀ2160ꢀpixels)ꢀbroadcastsꢀ  
directlyꢀbecauseꢀtheꢀrelatedꢀstandardsꢀhaveꢀnotꢀbeenꢀconfirmed.  
8
•ꢀ IfꢀyouꢀconnectꢀaꢀgamingꢀdeviceꢀtoꢀtheꢀTV,ꢀuseꢀtheꢀcableꢀsuppliedꢀ  
withꢀtheꢀgamingꢀdevice.  
•ꢀ Referꢀtoꢀtheꢀexternalꢀequipment’sꢀmanualꢀforꢀoperatingꢀ  
instructions.  
•ꢀ InꢀPCꢀmode,ꢀthereꢀmayꢀbeꢀnoiseꢀassociatedꢀwithꢀtheꢀresolution,ꢀ  
verticalꢀpattern,ꢀcontrastꢀorꢀbrightness.ꢀIfꢀnoiseꢀisꢀpresent,ꢀchangeꢀ  
theꢀPCꢀoutputꢀtoꢀanotherꢀresolution,ꢀchangeꢀtheꢀrefreshꢀrateꢀtoꢀ  
anotherꢀrateꢀorꢀadjustꢀtheꢀbrightnessꢀandꢀcontrastꢀonꢀtheꢀ[Picture]ꢀ  
menuꢀuntilꢀtheꢀpictureꢀisꢀclear.ꢀDependingꢀuponꢀtheꢀgraphicsꢀcard,ꢀ  
someꢀresolutionꢀsettingsꢀmayꢀnotꢀallowꢀtheꢀimageꢀtoꢀbeꢀpositionedꢀ  
onꢀtheꢀscreenꢀproperly.  
Using Button  
YouꢀcanꢀsimplyꢀoperateꢀtheꢀTVꢀfunctions,ꢀusingꢀtheꢀbutton.  
•ꢀ SomeꢀUSBꢀHubsꢀmayꢀnotꢀwork.ꢀIfꢀaꢀUSBꢀdeviceꢀconnectedꢀthroughꢀ  
aꢀUSBꢀHubꢀisꢀnotꢀdetected,ꢀconnectꢀitꢀdirectlyꢀtoꢀtheꢀUSBꢀportꢀonꢀ  
theꢀTV.  
•ꢀ WhenꢀconnectingꢀviaꢀaꢀwiredꢀLAN,ꢀitꢀisꢀrecommendedꢀtoꢀuseꢀaꢀCATꢀ  
7ꢀcable.  
•ꢀ TheꢀTVꢀmayꢀbeꢀcapableꢀofꢀoperatingꢀwithoutꢀaꢀset-top-boxꢀfromꢀaꢀ  
multichannelꢀvideoꢀprogrammingꢀdistributorꢀ(MVPD).  
Basic functions  
PowerꢀOnꢀ(Press)  
Remote RS-232C setup  
PowerꢀOffꢀ1ꢀ(PressꢀandꢀHold)  
MenuꢀControlꢀ(Pressꢀ2)  
MenuꢀSelectionꢀ(PressꢀandꢀHoldꢀ3)  
ToꢀobtainꢀtheꢀRS-232Cꢀexternalꢀcontrolꢀsetupꢀinformation,ꢀpleaseꢀ  
visitꢀwww.lg.com.ꢀDownloadꢀandꢀreadꢀtheꢀmanual,ꢀ(Dependingꢀuponꢀ  
model).  
1ꢀ Allꢀrunningꢀappsꢀwillꢀclose.  
2ꢀ Youꢀcanꢀaccessꢀandꢀadjustꢀtheꢀmenuꢀbyꢀpressingꢀtheꢀbuttonꢀwhenꢀ  
TVꢀisꢀon.  
3ꢀ Youꢀcanꢀuseꢀtheꢀfunctionꢀwhenꢀyouꢀaccessꢀmenuꢀcontrol.  
•ꢀ Doꢀnotꢀdropꢀtheꢀproductꢀorꢀletꢀitꢀfallꢀoverꢀwhenꢀconnectingꢀ  
externalꢀdevices.ꢀOtherwise,ꢀthisꢀmayꢀresultꢀinꢀinjuryꢀorꢀ  
damageꢀtoꢀtheꢀproduct.  
Adjusting the menu  
•ꢀ Whenꢀconnectingꢀexternalꢀdevicesꢀsuchꢀasꢀvideoꢀgameꢀ  
consoles,ꢀmakeꢀsureꢀtheꢀconnectingꢀcablesꢀareꢀlongꢀ  
enough.ꢀOtherwise,ꢀtheꢀproductꢀmayꢀfallꢀover,ꢀwhichꢀmayꢀ  
causeꢀinjuryꢀorꢀdamageꢀtheꢀproduct.  
WhenꢀtheꢀTVꢀisꢀturnedꢀon,ꢀpressꢀtheꢀ ꢀbuttonꢀoneꢀtime.ꢀYouꢀcanꢀadjustꢀ  
theꢀMenuꢀitemsꢀusingꢀtheꢀbutton.  
Turnsꢀtheꢀpowerꢀoff.  
Changesꢀtheꢀinputꢀsource.  
ꢀꢀ  
ꢀꢀ  
Adjustsꢀtheꢀvolumeꢀlevel.  
Scrollsꢀthroughꢀtheꢀsavedꢀchannels.  
9
To use the button, press and hold for more than 1 second.  
Using Remote Control  
(POWER)ꢀꢀTurnsꢀtheꢀTVꢀonꢀorꢀoff.  
ꢀꢀReturnsꢀtoꢀtheꢀlastꢀTVꢀchannel.  
(Dependingꢀuponꢀmodel)  
Theꢀdescriptionsꢀinꢀthisꢀmanualꢀareꢀbasedꢀonꢀtheꢀbuttonsꢀonꢀtheꢀremoteꢀ  
control.ꢀPleaseꢀreadꢀthisꢀmanualꢀcarefullyꢀandꢀuseꢀtheꢀTVꢀcorrectly.  
(SEARCH)ꢀꢀCheckꢀforꢀrecommendedꢀcontent.ꢀ(Someꢀ  
recommendedꢀservicesꢀmayꢀnotꢀbeꢀavailableꢀinꢀsomeꢀcountries.)  
Showsꢀtheꢀsearchꢀmode.  
Toꢀinstallꢀbatteries,ꢀopenꢀtheꢀbatteryꢀcover,ꢀreplaceꢀbatteriesꢀ(1.5ꢀVꢀAAA)ꢀ  
matchingꢀtheꢀ ꢀandꢀ ꢀendsꢀtoꢀtheꢀlabelꢀinsideꢀtheꢀcompartment,ꢀ  
andꢀcloseꢀtheꢀbatteryꢀcover.ꢀToꢀremoveꢀtheꢀbatteries,ꢀperformꢀtheꢀ  
installationꢀactionsꢀinꢀreverse.ꢀThisꢀremoteꢀusesꢀinfraredꢀlight.ꢀWhenꢀinꢀ  
use,ꢀitꢀshouldꢀbeꢀpointedꢀinꢀtheꢀdirectionꢀofꢀtheꢀTV’sꢀremoteꢀsensor.  
ꢀꢀActivatesꢀorꢀdeactivatesꢀtheꢀsubtitles.  
(Q. Settings)ꢀꢀAccessesꢀtheꢀQuickꢀSettings.  
(INPUT)ꢀꢀChangesꢀtheꢀinputꢀsource.  
Number buttonꢀꢀEntersꢀnumbers.  
ꢀꢀAccessesꢀtheꢀ[QuickꢀHelp].  
(DASH)ꢀꢀInsertsꢀaꢀ ꢀbetweenꢀnumbersꢀsuchꢀasꢀ2-1ꢀandꢀ2-2.  
Makeꢀsureꢀtoꢀpointꢀtheꢀremoteꢀcontrolꢀtowardꢀtheꢀremoteꢀcontrolꢀsensorꢀ  
onꢀtheꢀTV.  
ꢀꢀAccessesꢀtheꢀsavedꢀchannelsꢀlist.  
(MORE ACTIONS)ꢀꢀDisplaysꢀmoreꢀremoteꢀcontrolꢀfunctions.  
ꢀꢀEditsꢀQUICKꢀACCESS.  
-ꢀ QUICKꢀACCESSꢀisꢀaꢀfeatureꢀthatꢀallowsꢀyouꢀtoꢀenterꢀaꢀspecifiedꢀappꢀ  
orꢀLiveꢀTVꢀdirectlyꢀbyꢀpressingꢀandꢀholdingꢀtheꢀnumberꢀbuttons.  
ꢀꢀAdjustsꢀtheꢀvolumeꢀlevel.  
ꢀꢀAccessesꢀyourꢀfavoriteꢀchannelꢀlist.  
ꢀꢀDisplaysꢀtheꢀprogramꢀeventꢀaccordingꢀtoꢀtimeꢀscheduler.  
(MUTE)ꢀꢀMutesꢀallꢀsounds.  
(MUTE)ꢀꢀAccessesꢀtheꢀ[Accessibility]ꢀmenu.  
ꢀꢀScrollsꢀthroughꢀtheꢀsavedꢀchannels.  
ꢀꢀMovesꢀtoꢀtheꢀpreviousꢀorꢀnextꢀscreen.  
1
Streaming Service buttonsꢀꢀConnectsꢀtoꢀtheꢀVideoꢀStreamingꢀ  
Service.  
(HOME)ꢀꢀAccessesꢀtheꢀHomeꢀmenu.  
(HOME)ꢀꢀShowsꢀtheꢀpreviousꢀhistory.  
ꢀꢀReturnsꢀtoꢀtheꢀpreviousꢀscreen.  
1
1
1
ꢀꢀClearsꢀon-screenꢀdisplaysꢀandꢀreturnsꢀtoꢀlastꢀinputꢀviewing.  
Navigation buttonꢀ(upꢀ/ꢀdownꢀ/ꢀleftꢀ/ꢀright)ꢀꢀScrollsꢀthroughꢀmenusꢀ  
orꢀoptions.  
(OK)ꢀꢀSelectsꢀmenusꢀorꢀoptionsꢀandꢀconfirmsꢀyourꢀinput.  
ꢀꢀShowsꢀinformationꢀonꢀtheꢀcurrentꢀprogram.  
ꢀꢀEnablesꢀSAPꢀ(SecondaryꢀAudioꢀProgram)ꢀFeature.  
ꢀꢀStartsꢀtoꢀrecord.ꢀ(OnlyꢀTimeꢀMachineꢀReadyꢀsupportedꢀmodel)ꢀ  
(Control buttons)ꢀꢀControlꢀbuttonsꢀforꢀmediaꢀ  
contents.  
,ꢀ ,ꢀ ,ꢀ ꢀꢀTheseꢀaccessꢀspecialꢀfunctionsꢀinꢀsomeꢀmenus.  
(Someꢀbuttonsꢀandꢀservicesꢀmayꢀnotꢀbeꢀprovidedꢀdependingꢀuponꢀ  
modelsꢀorꢀregions.)  
10  
To use the button, press and hold for more than 1 second.  
Using Magic Remote Control  
(POWER)ꢀꢀTurnsꢀtheꢀTVꢀonꢀorꢀoff.  
(Dependingꢀuponꢀmodel)  
(STB POWER)ꢀꢀYouꢀcanꢀturnꢀyourꢀset-topꢀboxꢀonꢀorꢀoffꢀbyꢀaddingꢀ  
theꢀset-topꢀboxꢀtoꢀtheꢀuniversalꢀremoteꢀcontrolꢀforꢀyourꢀTV.  
Number buttonsꢀꢀEntersꢀnumbers.  
ꢀꢀAccessesꢀtheꢀ[QuickꢀHelp].  
(DASH)ꢀꢀInsertsꢀaꢀ ꢀbetweenꢀnumbersꢀsuchꢀasꢀ2-1ꢀandꢀ2-2.  
Theꢀdescriptionsꢀinꢀthisꢀmanualꢀareꢀbasedꢀonꢀtheꢀbuttonsꢀonꢀtheꢀremoteꢀ  
control.ꢀPleaseꢀreadꢀthisꢀmanualꢀcarefullyꢀandꢀuseꢀtheꢀTVꢀcorrectly.  
Whenꢀtheꢀmessageꢀ[Magicꢀremoteꢀbatteryꢀisꢀlow.ꢀPleaseꢀchangeꢀtheꢀ  
battery.]ꢀisꢀdisplayed,ꢀreplaceꢀtheꢀbatteries.  
Toꢀinstallꢀbatteries,ꢀopenꢀtheꢀbatteryꢀcover,ꢀreplaceꢀbatteriesꢀ(1.5ꢀVꢀAA)ꢀ  
matchingꢀtheꢀ ꢀandꢀ ꢀendsꢀtoꢀtheꢀlabelꢀinsideꢀtheꢀcompartment,ꢀ  
andꢀcloseꢀtheꢀbatteryꢀcover.ꢀBeꢀsureꢀtoꢀpointꢀtheꢀmagicꢀremoteꢀtowardꢀ  
theꢀremoteꢀcontrolꢀsensorꢀonꢀtheꢀTV.ꢀToꢀremoveꢀtheꢀbatteries,ꢀperformꢀ  
theꢀinstallationꢀactionsꢀinꢀreverse.ꢀThisꢀremoteꢀusesꢀinfraredꢀlight.ꢀWhenꢀ  
inꢀuse,ꢀitꢀshouldꢀbeꢀpointedꢀinꢀtheꢀdirectionꢀofꢀtheꢀTV’sꢀremoteꢀsensor.  
ꢀꢀAccessesꢀtheꢀsavedꢀchannelsꢀlist.  
(MORE ACTIONS)ꢀꢀDisplaysꢀmoreꢀremoteꢀcontrolꢀfunctions.  
ꢀꢀEditsꢀQUICKꢀACCESS.  
-ꢀ QUICKꢀACCESSꢀisꢀaꢀfeatureꢀthatꢀallowsꢀyouꢀtoꢀenterꢀaꢀspecifiedꢀappꢀ  
orꢀLiveꢀTVꢀdirectlyꢀbyꢀpressingꢀandꢀholdingꢀtheꢀnumberꢀbuttons.  
ꢀꢀSAP(SecondaryꢀAudioꢀProgram)ꢀFeatureꢀcanꢀalsoꢀbeꢀ  
enabledꢀbyꢀpressingꢀtheꢀ ꢀbutton.  
ꢀꢀAdjustsꢀtheꢀvolumeꢀlevel.  
(MUTE)ꢀꢀMutesꢀallꢀsounds.  
(MUTE)ꢀꢀAccessesꢀtheꢀ[Accessibility]ꢀmenu.  
ꢀꢀScrollsꢀthroughꢀtheꢀsavedꢀchannels.  
(Voice recognition)ꢀꢀNetworkꢀconnectionꢀisꢀrequiredꢀtoꢀuseꢀtheꢀ  
voiceꢀrecognitionꢀfunction.  
Checkꢀforꢀrecommendedꢀcontent.ꢀ(Someꢀrecommendedꢀservicesꢀmayꢀ  
notꢀbeꢀavailableꢀinꢀsomeꢀcountries.)  
(Voice recognition)ꢀꢀSpeakꢀwhileꢀpressingꢀandꢀholdingꢀtheꢀ  
buttonꢀtoꢀuseꢀtheꢀvoiceꢀrecognitionꢀfeature.  
(HOME)ꢀꢀAccessesꢀtheꢀHomeꢀmenu.  
(HOME)ꢀꢀShowsꢀtheꢀpreviousꢀhistory.  
(Q. Settings)ꢀꢀAccessesꢀtheꢀQuickꢀSettings.  
(Q. Settings)ꢀꢀDisplaysꢀtheꢀ[AllꢀSettings]ꢀmenu.  
Wheel (OK)ꢀꢀPressꢀtheꢀcenterꢀofꢀtheꢀWheelꢀbuttonꢀtoꢀselectꢀaꢀ  
menu.ꢀYouꢀcanꢀchangeꢀchannelsꢀbyꢀusingꢀtheꢀwheelꢀbutton.  
(up/down/left/right)ꢀꢀPressꢀtheꢀup,ꢀdown,ꢀleftꢀorꢀrightꢀ  
buttonꢀtoꢀscrollꢀtheꢀmenu.ꢀIfꢀyouꢀpressꢀ ꢀbuttonsꢀwhileꢀtheꢀ  
pointerꢀisꢀinꢀuse,ꢀtheꢀpointerꢀwillꢀdisappearꢀfromꢀtheꢀscreenꢀandꢀMagicꢀ  
Remoteꢀwillꢀoperateꢀlikeꢀaꢀgeneralꢀremoteꢀcontrol.ꢀToꢀdisplayꢀtheꢀ  
pointerꢀonꢀtheꢀscreenꢀagain,ꢀshakeꢀMagicꢀRemoteꢀtoꢀtheꢀleftꢀandꢀright.  
(BACK)ꢀꢀReturnsꢀtoꢀtheꢀpreviousꢀscreen.  
(BACK)ꢀꢀClearsꢀon-screenꢀdisplaysꢀandꢀreturnsꢀtoꢀlastꢀinputꢀ  
viewing.  
1
1
1
ꢀꢀDisplaysꢀtheꢀprogramꢀeventꢀaccordingꢀtoꢀtimeꢀscheduler.  
1
Streaming Service buttonsꢀꢀConnectsꢀtoꢀtheꢀVideoꢀStreamingꢀ  
Service.  
(INPUT)ꢀꢀChangesꢀtheꢀinputꢀsource.  
(INPUT)ꢀꢀAccessesꢀtheꢀ[HomeꢀDashboard].  
,ꢀ ,ꢀ ,ꢀ ꢀꢀTheseꢀaccessꢀspecialꢀfunctionsꢀinꢀsomeꢀmenus.  
,ꢀ ꢀ(Control buttons)ꢀꢀControlsꢀmediaꢀcontents.  
(Someꢀbuttonsꢀandꢀservicesꢀmayꢀnotꢀbeꢀprovidedꢀdependingꢀuponꢀ  
modelsꢀorꢀregions.)  
11  
Registering Magic Remote Control  
User Guide  
How to register the Magic Remote Control  
ForꢀmoreꢀinformationꢀaboutꢀthisꢀTV,ꢀreadꢀtheꢀUSERꢀGUIDEꢀembeddedꢀinꢀ  
theꢀproduct.  
ToꢀuseꢀtheꢀMagicꢀRemote,ꢀfirstꢀpairꢀitꢀwithꢀyourꢀTV.  
1ꢀ PutꢀbatteriesꢀintoꢀtheꢀMagicꢀRemoteꢀandꢀturnꢀtheꢀTVꢀon.  
2ꢀ PointꢀtheꢀMagicꢀRemoteꢀatꢀyourꢀTVꢀandꢀpressꢀtheꢀ Wheel (OK)ꢀonꢀ  
theꢀremoteꢀcontrol.  
•ꢀ ToꢀopenꢀtheꢀUSERꢀGUIDEꢀ  
ꢀ[Support]ꢀ ꢀ[UserꢀGuide]  
*ꢀ IfꢀtheꢀTVꢀfailsꢀtoꢀregisterꢀtheꢀMagicꢀRemote,ꢀtryꢀagainꢀafterꢀturningꢀ  
theꢀTVꢀoffꢀandꢀbackꢀon.  
Troubleshooting  
How to deregister the Magic Remote Control  
Pressꢀtheꢀ ꢀ(BACK)ꢀandꢀ ꢀ(HOME)ꢀbuttonsꢀatꢀtheꢀsameꢀtime,ꢀforꢀ  
fiveꢀseconds,ꢀtoꢀunpairꢀtheꢀMagicꢀRemoteꢀwithꢀyourꢀTV.  
CannotꢀcontrolꢀtheꢀTVꢀwithꢀtheꢀremoteꢀcontrol.  
•ꢀ Checkꢀifꢀanythingꢀsuchꢀasꢀtapeꢀhasꢀbeenꢀplacedꢀoverꢀtheꢀreceiver.  
•ꢀ Checkꢀifꢀthereꢀisꢀanyꢀobstacleꢀbetweenꢀtheꢀproductꢀandꢀtheꢀremoteꢀ  
control.  
•ꢀ Replaceꢀtheꢀbatteriesꢀwithꢀnewꢀfreshꢀones.  
Noꢀimageꢀdisplayꢀandꢀnoꢀsoundꢀisꢀproduced.  
*ꢀ Pressꢀandꢀholdꢀtheꢀ ꢀbuttonꢀforꢀmoreꢀthanꢀ5ꢀsecondsꢀtoꢀdisconnectꢀ  
andꢀre-registerꢀtheꢀMagicꢀRemoteꢀatꢀtheꢀsameꢀtime.  
•ꢀ Doꢀnotꢀmixꢀnewꢀbatteriesꢀwithꢀoldꢀbatteries.ꢀThisꢀmayꢀ  
causeꢀtheꢀbatteriesꢀtoꢀoverheatꢀandꢀleak.  
•ꢀ Failureꢀtoꢀmatchꢀtheꢀcorrectꢀpolaritiesꢀofꢀtheꢀbatteryꢀ  
mayꢀcauseꢀtheꢀbatteryꢀtoꢀburstꢀorꢀleak,ꢀresultingꢀinꢀfire,ꢀ  
personalꢀinjury,ꢀorꢀambientꢀpollution.  
•ꢀ Thisꢀapparatusꢀusesꢀbatteries.ꢀInꢀyourꢀcommunityꢀthereꢀ  
mightꢀbeꢀregulationsꢀthatꢀrequireꢀyouꢀtoꢀdisposeꢀofꢀtheseꢀ  
batteriesꢀproperlyꢀdueꢀtoꢀenvironmentalꢀconsiderations.ꢀ  
Pleaseꢀcontactꢀyourꢀlocalꢀauthoritiesꢀforꢀdisposalꢀorꢀ  
recyclingꢀinformation.  
•ꢀ Checkꢀifꢀtheꢀproductꢀisꢀturnedꢀon.  
•ꢀ Checkꢀifꢀtheꢀpowerꢀcordꢀisꢀconnectedꢀtoꢀaꢀwallꢀoutlet.  
•ꢀ Checkꢀifꢀthereꢀisꢀaꢀproblemꢀinꢀtheꢀwallꢀoutletꢀbyꢀconnectingꢀotherꢀ  
products.  
TheꢀTVꢀturnsꢀoffꢀsuddenly.  
•ꢀ Checkꢀtheꢀpowerꢀcontrolꢀsettings.ꢀTheꢀpowerꢀsupplyꢀmayꢀbeꢀ  
interrupted.  
•ꢀ Checkꢀifꢀtheꢀauto-offꢀfunctionꢀisꢀactivatedꢀinꢀtheꢀsettingsꢀmenu.  
•ꢀ IfꢀthereꢀisꢀnoꢀsignalꢀwhileꢀtheꢀTVꢀisꢀon,ꢀtheꢀTVꢀwillꢀturnꢀoffꢀ  
automaticallyꢀafterꢀ15ꢀminutesꢀofꢀinactivity.  
•ꢀ Batteriesꢀinsideꢀorꢀinsideꢀtheꢀproductꢀshallꢀnotꢀbeꢀexposedꢀ  
toꢀexcessiveꢀheatꢀsuchꢀasꢀsunshine,ꢀfireꢀorꢀtheꢀlike.  
12  
Abnormal Display  
•ꢀ Whenꢀcleaningꢀtheꢀproduct,ꢀbeꢀcarefulꢀnotꢀtoꢀallowꢀanyꢀ  
liquidꢀorꢀforeignꢀobjectsꢀtoꢀenterꢀtheꢀgapꢀbetweenꢀtheꢀ  
upper,ꢀleftꢀorꢀrightꢀsideꢀofꢀtheꢀpanelꢀandꢀtheꢀguideꢀpanel,ꢀ  
(Dependingꢀuponꢀmodel).  
•ꢀ IfꢀtheꢀTVꢀfeelsꢀcoldꢀtoꢀtheꢀtouch,ꢀthereꢀmayꢀbeꢀaꢀsmallꢀflickerꢀwhenꢀ  
itꢀisꢀturnedꢀon.ꢀThisꢀisꢀnormal;ꢀthereꢀisꢀnothingꢀwrongꢀwithꢀTV.ꢀ  
Someꢀminuteꢀdotꢀdefectsꢀmayꢀbeꢀvisibleꢀonꢀtheꢀscreen,ꢀappearingꢀ  
asꢀtinyꢀred,ꢀgreen,ꢀorꢀblueꢀspots.ꢀHowever,ꢀtheyꢀhaveꢀnoꢀadverseꢀ  
effectꢀonꢀtheꢀTV’sꢀperformance.ꢀAvoidꢀtouchingꢀtheꢀLCDꢀscreenꢀorꢀ  
holdingꢀyourꢀfinger(s)ꢀagainstꢀitꢀforꢀlongꢀperiodsꢀofꢀtime.ꢀDoingꢀsoꢀ  
mayꢀproduceꢀsomeꢀtemporaryꢀdistortionꢀeffectsꢀonꢀtheꢀscreen.  
•ꢀ Thisꢀpanelꢀisꢀanꢀadvancedꢀproductꢀthatꢀcontainsꢀmillionsꢀofꢀpixels.ꢀ  
Inꢀaꢀveryꢀfewꢀcases,ꢀyouꢀcouldꢀseeꢀfineꢀdotsꢀonꢀtheꢀscreenꢀwhileꢀ  
you’reꢀviewingꢀtheꢀTV.ꢀThoseꢀdotsꢀareꢀdeactivatedꢀpixelsꢀandꢀdoꢀnotꢀ  
affectꢀtheꢀperformanceꢀandꢀreliabilityꢀofꢀtheꢀTV.  
•ꢀ Makeꢀsureꢀtoꢀwringꢀanyꢀexcessꢀwaterꢀorꢀcleanerꢀfromꢀtheꢀ  
cloth.  
•ꢀ DoꢀnotꢀsprayꢀwaterꢀorꢀcleanerꢀdirectlyꢀontoꢀtheꢀTVꢀscreen.  
•ꢀ Makeꢀsureꢀtoꢀsprayꢀjustꢀenoughꢀofꢀwaterꢀorꢀcleanerꢀontoꢀaꢀ  
dryꢀclothꢀtoꢀwipeꢀtheꢀscreen.  
•ꢀ Displayingꢀaꢀstillꢀimageꢀforꢀaꢀprolongedꢀperiodꢀofꢀtimeꢀmayꢀcauseꢀ  
anꢀimageꢀsticking.ꢀAvoidꢀdisplayingꢀaꢀfixedꢀimageꢀonꢀtheꢀTVꢀscreenꢀ  
forꢀaꢀextendedꢀlengthꢀofꢀtime.  
Generated Sound  
•ꢀ Cracking noiseꢀAꢀcrackingꢀnoiseꢀthatꢀoccursꢀwhenꢀwatchingꢀorꢀ  
turningꢀoffꢀtheꢀTVꢀisꢀgeneratedꢀbyꢀplasticꢀthermalꢀcontractionꢀdueꢀ  
toꢀtemperatureꢀandꢀhumidity.ꢀThisꢀnoiseꢀisꢀcommonꢀforꢀproductsꢀ  
whereꢀthermalꢀdeformationꢀisꢀrequired.  
•ꢀ Electrical circuit humming/panel buzzingꢀAꢀlowꢀlevelꢀnoiseꢀ  
isꢀgeneratedꢀfromꢀaꢀhigh-speedꢀswitchingꢀcircuit,ꢀwhichꢀsuppliesꢀaꢀ  
largeꢀamountꢀofꢀcurrentꢀtoꢀoperateꢀaꢀproduct.ꢀItꢀvariesꢀdependingꢀ  
uponꢀtheꢀproduct.ꢀThisꢀgeneratedꢀsoundꢀdoesꢀnotꢀaffectꢀtheꢀ  
performanceꢀandꢀreliabilityꢀofꢀtheꢀproduct.  
13  
Specifications  
Productꢀspecificationsꢀmayꢀbeꢀchangedꢀwithoutꢀpriorꢀnoticeꢀdueꢀtoꢀupgradeꢀofꢀproductꢀfunctions.  
EstimatedꢀyearlyꢀenergyꢀconsumptionꢀindicatedꢀonꢀtheꢀFTCꢀlabelꢀisꢀmeasuredꢀinꢀaccordanceꢀwithꢀtheꢀTestꢀProceduresꢀforꢀTelevisionꢀSetsꢀ(USAꢀonly).  
Theꢀactualꢀenergyꢀconsumptionꢀdependsꢀonꢀtheꢀusageꢀenvironmentꢀ(Theꢀcontentꢀwatched,ꢀTVꢀsettings,ꢀetc.).  
•ꢀ Forꢀinformationꢀofꢀtheꢀpowerꢀsupplyꢀandꢀpowerꢀconsumption,ꢀreferꢀtoꢀtheꢀlabelꢀattachedꢀtoꢀtheꢀproduct.  
-ꢀ TheꢀtypicalꢀpowerꢀconsumptionꢀisꢀmeasuredꢀinꢀaccordanceꢀwithꢀIECꢀ62087ꢀorꢀeachꢀcountry’sꢀenergyꢀregulations.  
*ꢀ Onꢀsomeꢀmodels,ꢀtheꢀlabelꢀisꢀinsideꢀtheꢀexternalꢀdeviceꢀconnectionꢀterminalꢀcover.  
*ꢀ Dependingꢀuponꢀtheꢀmodelꢀorꢀcountry,ꢀtheꢀtypicalꢀpowerꢀconsumptionꢀmayꢀnotꢀbeꢀonꢀlabel.  
(Dependingꢀuponꢀcountry)  
Broadcasting Specifications  
Television system  
ATSCꢀ/ꢀNTSC-M,ꢀ64ꢀ&ꢀ256ꢀQAM  
Program coverage  
(Band)  
VHFꢀ2-13,ꢀUHFꢀ14-69,ꢀDTVꢀ2-69,ꢀCATVꢀ1-135,ꢀCADTVꢀ1-135  
External antenna  
impedance  
75ꢀΩ  
(ForꢀUN85ꢀSeries)  
Wireless module (LGSBWAC92) Specifications  
WirelessꢀLANꢀ(IEEEꢀ802.11a/b/g/n/ac)  
OutputꢀPowerꢀ(Max.)  
FrequencyꢀRange  
2,400ꢀtoꢀ2,483.5ꢀMHz  
5,150ꢀtoꢀ5,725ꢀMHz  
5,725ꢀtoꢀ5,850ꢀMHz  
18ꢀdBm  
18ꢀdBm  
18ꢀdBm  
Bluetooth  
FrequencyꢀRange  
OutputꢀPowerꢀ(Max.)  
8ꢀdBm  
2,400ꢀtoꢀ2,483.5ꢀMHz  
Asꢀbandꢀchannelsꢀcanꢀvaryꢀperꢀcountry,ꢀtheꢀuserꢀcannotꢀchangeꢀorꢀadjustꢀtheꢀoperatingꢀfrequency.ꢀThisꢀproductꢀisꢀconfiguredꢀforꢀtheꢀregionalꢀ  
frequencyꢀtable.  
Forꢀconsiderationꢀofꢀtheꢀuser,ꢀthisꢀdeviceꢀshouldꢀbeꢀinstalledꢀandꢀoperatedꢀwithꢀaꢀminimumꢀdistanceꢀofꢀ20ꢀcmꢀ(7.8ꢀinches)ꢀbetweenꢀtheꢀdeviceꢀ  
andꢀtheꢀbody.  
FCCꢀID:ꢀBEJLGSBWAC92  
IC:ꢀ2703H-LGSBWAC92  
14  
(ForꢀUN71ꢀ/ꢀUN73ꢀ/ꢀUN80ꢀSeries)  
Wireless module (LGSBWAC02) Specifications  
WirelessꢀLANꢀ(IEEEꢀ802.11a/b/g/n/ac)  
FrequencyꢀRange  
OutputꢀPowerꢀ(Max.)  
2,400ꢀtoꢀ2,483.5ꢀMHz  
5,150ꢀtoꢀ5,725ꢀMHz  
5,725ꢀtoꢀ5,850ꢀMHz  
18.5ꢀdBm  
17ꢀdBm  
18.5ꢀdBm  
Bluetooth  
FrequencyꢀRange  
OutputꢀPowerꢀ(Max.)  
8.5ꢀdBm  
2,400ꢀtoꢀ2,483.5ꢀMHz  
Asꢀbandꢀchannelsꢀcanꢀvaryꢀperꢀcountry,ꢀtheꢀuserꢀcannotꢀchangeꢀorꢀadjustꢀtheꢀoperatingꢀfrequency.ꢀThisꢀproductꢀisꢀconfiguredꢀforꢀtheꢀregionalꢀ  
frequencyꢀtable.  
Forꢀconsiderationꢀofꢀtheꢀuser,ꢀthisꢀdeviceꢀshouldꢀbeꢀinstalledꢀandꢀoperatedꢀwithꢀaꢀminimumꢀdistanceꢀofꢀ20ꢀcmꢀ(7.8ꢀinches)ꢀbetweenꢀtheꢀdeviceꢀ  
andꢀtheꢀbody.  
FCCꢀID:ꢀBEJLGSBWAC02  
IC:ꢀ2703H-LGSBWAC02  
(ForꢀUN69/UN70ꢀSeries)  
Wireless module (LGSWFAC81) Specifications  
WirelessꢀLANꢀ(IEEEꢀ802.11a/b/g/n/ac)  
FrequencyꢀRange  
OutputꢀPowerꢀ(Max.)  
2,400ꢀtoꢀ2,483.5ꢀMHz  
5,150ꢀtoꢀ5,725ꢀMHz  
5,725ꢀtoꢀ5,850ꢀMHz  
20ꢀdBm  
15ꢀdBm  
14.5ꢀdBm  
Asꢀbandꢀchannelsꢀcanꢀvaryꢀperꢀcountry,ꢀtheꢀuserꢀcannotꢀchangeꢀorꢀadjustꢀtheꢀoperatingꢀfrequency.ꢀThisꢀproductꢀisꢀconfiguredꢀforꢀtheꢀregionalꢀ  
frequencyꢀtable.  
Forꢀconsiderationꢀofꢀtheꢀuser,ꢀthisꢀdeviceꢀshouldꢀbeꢀinstalledꢀandꢀoperatedꢀwithꢀaꢀminimumꢀdistanceꢀofꢀ20ꢀcmꢀ(7.8ꢀinches)ꢀbetweenꢀtheꢀdeviceꢀ  
andꢀtheꢀbody.  
FCCꢀID:ꢀBEJLGSWFAC81  
IC:ꢀ2703H-LGSWFAC81  
Environment condition  
Operating Temperature  
Operating Humidity  
Storage Temperature  
Storage Humidity  
0ꢀ°Cꢀtoꢀ40ꢀ°Cꢀ(32ꢀ°Fꢀtoꢀ104ꢀ°F)  
Lessꢀthanꢀ80ꢀ%  
-20ꢀ°Cꢀtoꢀ60ꢀ°Cꢀ(-4ꢀ°Fꢀtoꢀ140ꢀ°F)  
Lessꢀthanꢀ85ꢀ%  
15  
Open Source Software  
Notice Information  
Regulatory  
ToꢀobtainꢀtheꢀsourceꢀcodeꢀunderꢀGPL,ꢀLGPL,ꢀMPL,ꢀandꢀotherꢀopenꢀsourceꢀ  
licenses,ꢀthatꢀisꢀcontainedꢀinꢀthisꢀproduct,ꢀpleaseꢀvisitꢀhttp://opensource.  
Inꢀadditionꢀtoꢀtheꢀsourceꢀcode,ꢀallꢀreferredꢀlicenseꢀterms,ꢀwarrantyꢀ  
disclaimersꢀandꢀcopyrightꢀnoticesꢀareꢀavailableꢀforꢀdownload.  
LGꢀElectronicsꢀwillꢀalsoꢀprovideꢀopenꢀsourceꢀcodeꢀtoꢀyouꢀonꢀCD-ROMꢀ  
forꢀaꢀchargeꢀcoveringꢀtheꢀcostꢀofꢀperformingꢀsuchꢀdistributionꢀ(suchꢀ  
asꢀtheꢀcostꢀofꢀmedia,ꢀshipping,ꢀandꢀhandling)ꢀuponꢀemailꢀrequestꢀtoꢀ  
Thisꢀofferꢀisꢀvalidꢀforꢀaꢀperiodꢀofꢀthreeꢀyearsꢀafterꢀourꢀlastꢀshipmentꢀofꢀ  
thisꢀproduct.ꢀThisꢀofferꢀisꢀvalidꢀtoꢀanyoneꢀinꢀreceiptꢀofꢀthisꢀinformation.  
Licenses  
-ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
(MagicꢀRemoteꢀsupportedꢀmodelsꢀonly)  
16  
(1)ꢀ  
(2)ꢀ  
(3)ꢀ  
(4)ꢀ  
NOTE TO CABLE/TV INSTALLER  
(ForꢀUSAꢀandꢀCanada)  
ThisꢀreminderꢀisꢀprovidedꢀtoꢀcallꢀtheꢀCATVꢀsystemꢀinstaller’sꢀattentionꢀtoꢀ  
Articleꢀ820-40ꢀofꢀtheꢀNationalꢀElectricꢀCodeꢀ(U.S.A.).ꢀTheꢀcodeꢀprovidesꢀ  
guidelinesꢀforꢀproperꢀgroundingꢀand,ꢀinꢀparticular,ꢀspecifiesꢀthatꢀ  
theꢀcableꢀgroundꢀshallꢀbeꢀconnectedꢀtoꢀtheꢀgroundingꢀsystemꢀofꢀtheꢀ  
building,ꢀasꢀcloseꢀtoꢀtheꢀpointꢀofꢀtheꢀcableꢀentryꢀasꢀpractical.  
17  
WARNING!  
Neverꢀplaceꢀaꢀtelevisionꢀsetꢀinꢀanꢀunstableꢀlocation.ꢀAꢀtelevisionꢀsetꢀmayꢀ  
fall,ꢀcausingꢀseriousꢀpersonalꢀinjuryꢀorꢀdeath.ꢀManyꢀinjuries,ꢀparticularlyꢀ  
toꢀchildren,ꢀcanꢀbeꢀavoidedꢀbyꢀtakingꢀsimpleꢀprecautionsꢀsuchꢀas:  
•ꢀ Usingꢀcabinetsꢀorꢀstandsꢀrecommendedꢀbyꢀtheꢀmanufacturerꢀofꢀtheꢀ  
televisionꢀset.  
•ꢀ Onlyꢀusingꢀfurnitureꢀthatꢀcanꢀsafelyꢀsupportꢀtheꢀtelevisionꢀset.  
•ꢀ Ensuringꢀtheꢀtelevisionꢀsetꢀisꢀnotꢀoverhangingꢀtheꢀedgeꢀofꢀtheꢀ  
supportingꢀfurniture.  
•ꢀ Notꢀplacingꢀtheꢀtelevisionꢀsetꢀonꢀtallꢀfurnitureꢀ(forꢀexample,ꢀ  
cupboardsꢀorꢀbookcases)ꢀwithoutꢀanchoringꢀbothꢀtheꢀfurnitureꢀandꢀ  
theꢀtelevisionꢀsetꢀtoꢀaꢀsuitableꢀsupport.  
•ꢀ Notꢀplacingꢀtheꢀtelevisionꢀsetꢀonꢀclothꢀorꢀotherꢀmaterialsꢀthatꢀmayꢀ  
beꢀlocatedꢀbetweenꢀtheꢀtelevisionꢀsetꢀandꢀsupportingꢀfurniture.  
•ꢀ Educatingꢀchildrenꢀaboutꢀtheꢀdangersꢀofꢀclimbingꢀonꢀfurnitureꢀtoꢀ  
reachꢀtheꢀtelevisionꢀsetꢀorꢀitsꢀcontrols.  
Ifꢀyourꢀexistingꢀtelevisionꢀsetꢀisꢀbeingꢀretainedꢀandꢀrelocated,ꢀtheꢀsameꢀ  
considerationsꢀasꢀaboveꢀshouldꢀbeꢀapplied.  
Symbols  
Refersꢀtoꢀalternatingꢀcurrentꢀ(AC).  
Refersꢀtoꢀdirectꢀcurrentꢀ(DC).  
RefersꢀtoꢀclassꢀIIꢀequipment.  
Refersꢀtoꢀstand-by.  
Refersꢀtoꢀ“ON”ꢀ(power).  
Refersꢀtoꢀdangerousꢀvoltage.  
18  
CHILD SAFETY:  
PROPER TELEVISION PLACEMENT MATTERS  
THE CONSUMER ELECTRONICS INDUSTRY CARES  
• Manufacturers, retailers and the rest of the consumer electronics industry are committed to  
making home entertainment safe and enjoyable.  
• As you enjoy your television, please note that all televisions – new and old- must be supported on  
proper stands or installed according to the manufacturer’s recommendations. Televisions that  
are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc.,  
may fall over, resulting in injury.  
TUNE IN TO SAFETY  
ALWAYS follow the manufacturer’s recommendations for the safe installation of your television.  
ALWAYS read and follow all instructions for proper use of your television.  
NEVER allow children to climb on or play on the television or the furniture on which the television  
is placed.  
NEVER place the television on furniture that can easily be used as steps, such as a chest of  
drawers.  
ALWAYS install the television where it cannot be pushed, pulled over or knocked down.  
ALWAYS route cords and cables connected to the television so that they cannot be tripped  
over, pulled or grabbed.  
WALL OR CEILING MOUNT YOUR TELEVISION  
ALWAYS contact your retailer about professional installation if you have any doubts about your  
ability to safely mount your television.  
ALWAYS use a mount that has been recommended by the television manufacturer and has a  
safety certification by an independent laboratory (such as UL, CSA, ETL).  
ALWAYS follow all instructions supplied by the television and mount manufacturers.  
ALWAYS make sure that the wall or ceiling where you are mounting the television is appropriate.  
Some mounts are not designed to be mounted to walls and ceilings with steel studs or cinder  
block construction. If you are unsure, contact a professional installer.  
Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount  
installation.  
MOVING AN OLDER TELEVISION TO A NEW PLACE IN  
YOUR HOME  
• Many new television buyers move their older CRT televisions into a secondary room after the  
purchase of a flat-panel television. Special care should be made in the placement of older CRT  
televisions.  
ALWAYS place your older CRT television on furniture that is sturdy and appropriate for its size  
and weight.  
NEVER place your older CRT television on a dresser where children may be tempted to use the  
drawers to climb.  
ALWAYS make sure your older CRT television does not hang over the edge of your furniture.  
CE.org/safety  
Supplier`s Declaration of Conformity  
Trade Name  
LG  
Responsible Party LG Electronics USA, Inc.  
1000 Sylvan Ave Englewood  
Cliffs, NJ 07632  
Address  
LG Customer Information Center  
call;  
Telephone  
(201)266-2215  
1-800-243-0000  
1-888-865-3026  
1-888-542-2623  
USA, Consumer User  
USA, Commercial User  
CANADA  
The model and serial number of the product are located  
on the back and on one side of the product.  
Record them below in case you ever need service.  
Register your product Online!  
Model  
Serial No.  
OWNER’S MANUAL  
EXTERNAL CONTROL  
DEVICE SETUP  
Please read this manual carefully before operating the set and retain it for  
future reference.  
P/NO : MFL71445401 (1901-REV00)  
KEY CODES  
2
KEY CODES  
This feature is not available for all models.  
Code  
(Hexa)  
Code  
(Hexa)  
Function  
CH +, PR +  
Note  
Function  
Note  
00  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
53  
5B  
60  
61  
63  
71  
72  
79  
91  
9E  
7A  
7C  
7E  
8E  
8F  
AA  
AB  
B0  
B1  
B5  
List  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
01  
CH -, PR -  
Volume +  
Exit  
02  
PIP(AD)  
Blue  
03  
Volume -  
06  
> (Arrow Key / Right Key)  
< (Arrow Key / Left Key)  
Power  
Yellow  
Green  
Red  
07  
08  
09  
Mute  
Ratio / Aspect Ratio  
AD (Audio Description)  
LIVE MENU  
0B  
0E  
0F  
Input  
SLEEP  
TV, TV/RAD  
User Guide  
10 - 19 * Number Key 0 - 9  
Smart / Home  
SIMPLINK  
1A  
1E  
20  
21  
28  
30  
39  
40  
Q.View / Flashback  
FAV (Favorite Channel)  
Text (Teletext)  
►► (Forward)  
◄◄ (Rewind)  
Info  
T. Opt (Teletext Option)  
Return (BACK)  
Program Guide  
► (Play)  
AV (Audio / Video) Mode  
Caption/Subtitle  
(Stop / File List)  
RECENT  
Λ
(Arrow Key / Cursor Up)  
V (Arrow Key / Cursor  
Down)  
(Freeze / Slow Play /  
41  
R/C Button  
BA  
R/C Button  
Pause)  
42  
43  
44  
45  
4C  
4D  
52  
My Apps  
Menu / Settings  
OK / Enter  
Q.Menu  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
BB  
BD  
DC  
99  
Soccer  
(REC)  
3D  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
AutoConfig  
App / *  
TV / PC  
List, -  
9F  
PICTURE  
SOUND  
9B  
* Key code 4C (0x4C) is available on ATSC/ISDB models which use major/minor channel.  
(For South Korea, Japan, North America, Latin America except Colombia models)  
 
EXTERNAL CONTROL DEVICE SETUP  
3
EXTERNAL CONTROL DEVICE SETUP  
Image shown may differ from your TV.  
Connect the USB to Serial(RS-232C) converter/RS-232C(Serial) input jack to an external control device  
(such as a computer or an A/V control system) to control the product’s functions externally.  
Note: The type of control port on the TV can be different between model series.  
* Please be advised that not all models support this type of connectivity.  
* Cable is not provided.  
USB to Serial(RS-232C) converter with USB Cable  
USB Type  
(TV)  
(PC)  
LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial(RS-232C)  
converter which is not made nor provided by LG.  
It can be purchased from computer stores that carry accessories for IT support professionals.  
RS-232C(Serial) With RS-232C(Serial) Cable  
DE9 (D-Sub 9pin) Type  
You need to purchase the RS-232C (DE9, D-Sub 9pin female-to-female type) to RS-232C(Serial) cable  
required for the connection between the PC and the TV, which is specified in the manual.  
RS-232C IN  
(CONTROL & SERVICE)  
(PC)  
(TV)  
The connection interface may differ from your TV.  
EXTERNAL CONTROL DEVICE SETUP  
4
Phone jack Type  
You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and  
the TV, which is specified in the manual.  
* For other models, connect to the USB port.  
* The connection interface may differ from your TV.  
1
3
(PC)  
(TV)  
(TV)  
2
- or  
1
3
(PC)  
RS-232C IN  
(CONTROL & SERVICE)  
2
Customer Computer  
RS-232C configurations  
3-Wire Configurations(Not standard)  
1
5
PC  
TV  
RXD  
TXD  
GND  
2
3
5
2
1
3
TXD  
RXD  
GND  
OR  
6
9
RXD  
TXD  
GND  
3
2
5
2
1
3
TXD  
RXD  
GND  
RS-232C  
(Serial port)  
D-Sub 9  
Phone  
Set ID  
For Set ID number, see "Real Data Mapping" on p.6  
1. Press SETTINGS to access the main menus.  
2. Press the Navigation buttons to scroll to (*General → About this TV or OPTION) and press OK.  
3. Press the Navigation buttons to scroll to SET ID and press OK.  
4. Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99.  
5. When you are finished, press EXIT.  
* (Depending on model)  
EXTERNAL CONTROL DEVICE SETUP  
5
Communication Parameters  
Baud rate : 9600 bps (UART)  
Data length : 8 bits  
Parity : None  
Stop bit : 1 bit  
Communication code : ASCII code  
Use a crossed (reverse) cable.  
Command reference list  
(Depending on model)  
DATA  
(Hexadecimal)  
DATA  
(Hexadecimal)  
COMMAND1 COMMAND2  
COMMAND1 COMMAND2  
01. Power*  
k
k
a
c
00 to 01  
15. Balance  
k
x
t
00 to 64  
16. Color  
(Colour)  
Temperature  
02. Aspect  
Ratio  
(p.7)  
(p.7)  
u
00 to 64  
(p.8)  
17. ISM  
Method (Only j  
Plasma TV)  
03. Screen  
Mute  
k
d
p
04. Volume  
Mute  
k
k
k
e
f
00 to 01  
00 to 64  
00 to 64  
18. Equalizer j  
v
(p.9)  
05. Volume  
Control  
19. Energy  
Saving  
j
q
00 to 05  
20. Tune  
Command  
06. Contrast  
g
m
a
b
(p.9)  
21. Channel  
(Programme)  
Add/Del(Skip)  
m
00 to 01  
07.  
Brightness  
k
k
h
i
00 to 64  
00 to 64  
08. Color/  
Colour  
22. Key  
m
m
c
Key Codes  
00 to 64  
23. Control  
Backlight,  
Control Panel  
Light  
g
09. Tint  
k
j
00 to 64  
10.  
Sharpness  
24. Input  
select (Main)  
x
x
b
t
(p.11)  
(p.11)  
(p.12)  
k
k
k
l
00 to 32  
00 to 01  
11. OSD  
Select  
25. 3D (Only  
3D models)  
12. Remote  
Control Lock  
Mode  
26. Extended x  
3D (Only 3D  
models)  
v
k
k
k
m
r
00 to 01  
00 to 64  
00 to 64  
27. Auto  
Configure  
j
u
(p.12)  
13. Treble  
14. Bass  
s
* Note: During playing or recording media, all commands except Power (ka) and Key (mc) are not  
executed and treated as NG.  
With RS232C cable, TV can communicate "ka command" in power-on or power-off status. but with  
USB-to-Serial converter cable, the command works only if TV is on.  
EXTERNAL CONTROL DEVICE SETUP  
6
Transmission / Receiving Protocol  
Transmission  
[Command1][Command2][ ][Set ID][ ][Data][Cr]  
[Command 1] : First command to control the TV. (j, k, m or x)  
[Command 2] : Second command to control the TV.  
[Set ID]  
: You can adjust the [Set ID] to choose desired monitor ID number in option menu.  
Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set  
can be controlled.  
* [Set ID] is indicated as decimal (1 to 99) on menu and as Hexadecimal (0x00 to 0x63) on  
transmission/receiving protocol.  
[DATA]  
[Cr]  
: To transmit command data (hexadecimal). Transmit ‘FF’ data to read status of command.  
: Carriage Return - ASCII code ‘0x0D’  
[ ]  
: Space – ASCII code ‘0x20’  
OK Acknowledgement  
[Command2][ ][Set ID][ ][OK][Data][x]  
* The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time,  
if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the  
data of the PC computer.  
Error Acknowledgement  
[Command2][ ][Set ID][ ][NG][Data][x]  
* The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from  
non-viable functions or communication errors.  
Data 00: Illegal Code  
Real data mapping (Hexadecimal b Decimal)  
* When you enter the [data] in hexadecimal, refer to following conversion table.  
* Channel Tune (ma) Command uses two-byte hexadecimal value([data]) to select channel number.  
00 : Step 0  
01 : Step 1 (Set ID 1)  
32 : Step 50 (Set ID 50)  
33 : Step 51 (Set ID 51)  
FE : Step 254  
FF : Step 255  
...  
...  
...  
0A : Step 10 (Set ID 10)  
63 : Step 99 (Set ID 99)  
01 00 : Step 256  
...  
...  
...  
0F : Step 15 (Set ID 15)  
10 : Step 16 (Set ID 16)  
...  
C7 : Step 199  
C8 : Step 200  
...  
27 0E : Step 9998  
27 0F : Step 9999  
...  
 
EXTERNAL CONTROL DEVICE SETUP  
7
* Commands may work differently depending on model and signal.  
01. Power (Command: k a)  
Ack [d][ ][Set ID][ ][OK/NG][Data][x]  
To control Power *On or Off of the set.  
Transmission[k][a][ ][Set ID][ ][Data][Cr]  
* In case of video mute on only, TV will display On  
Screen Display(OSD). But, in case of Screen mute  
on, TV will not display OSD.  
Data 00 : Power Off  
01 : *Power On  
Ack [a][ ][Set ID][ ][OK/NG][Data][x]  
04. Volume Mute (Command: k e)  
To Show TV is Power On or *Off  
Transmission [k][a][ ][Set ID][ ][FF][Cr]  
Ack [a][ ][Set ID][ ][OK][Data][x]  
To control volume mute on/off.  
You can also adjust mute using the MUTE button  
on remote control.  
Transmission [k][e][ ][Set ID][ ][Data][Cr]  
* Similarly, if other functions transmit ‘FF’ data  
based on this format, Acknowledgement feedback  
presents status about each function.  
Data 00 : Volume mute on (Volume off)  
01 : Volume mute off (Volume on)  
Ack [e][ ][Set ID][ ][OK/NG][Data][x]  
02. Aspect Ratio (Command: k c)  
(Main Picture Size)  
05. Volume Control (Command: k f)  
To adjust the screen format. (Main picture format)  
You can also adjust the screen format using the  
Aspect Ratio in the Q.MENU. or PICTURE menu.  
To adjust volume.  
You can also adjust volume with the volume  
buttons on remote control.  
Transmission [k][f][ ][Set ID][ ][Data][Cr]  
Transmission [k][c][ ][Set ID][ ][Data][Cr]  
Data 01 : Normal screen 07 : 14:9  
Data Min : 00 to Max : 64  
(4:3)  
02 : Wide screen  
(16:9)  
(Europe, Colombia, Mid-East,  
Asia except South Korea and  
Japan)  
Ack [f][ ][Set ID][ ][OK/NG][Data][x]  
04 : Zoom  
09 : * Just Scan  
0B : Full Wide  
(Europe, Colombia, Mid-  
East, Asia except South  
Korea and Japan)  
06. Contrast (Command: k g)  
05 : Zoom 2  
(Latin America  
except Colombia  
Only)  
To adjust screen contrast.  
You can also adjust contrast in the PICTURE  
menu.  
06 : Set by Program/ 10 to 1F : Cinema Zoom 1 to 16  
Original 0c : 21:9 (Depending on model)  
Transmission [k][g][ ][Set ID][ ][Data][Cr]  
Data Min : 00 to Max : 64  
Ack [c][ ][Set ID][ ][OK/NG][Data][x]  
Ack [g][ ][Set ID][ ][OK/NG][Data][x]  
* Using the PC input, you select either 16:9 or 4:3  
screen aspect ratio.  
* In DTV/HDMI/Component mode (high-definition),  
Just Scan is available.  
07. Brightness (Command: k h)  
To adjust screen brightness.  
You can also adjust brightness in the PICTURE  
menu.  
* Full wide mode may work differently based on  
model and is supported for DTV fully, and ATV,  
AV partially.  
Transmission [k][h][ ][Set ID][ ][Data][Cr]  
Data Min : 00 to Max : 64  
03. Screen Mute (Command: k d)  
To select screen mute on/off.  
Ack [h][ ][Set ID][ ][OK/NG][Data][x]  
Transmission [k][d][ ][Set ID][ ][Data][Cr]  
Data 00 : Screen mute off (Picture on)  
Video mute off  
01 : Screen mute on (Picture off)  
10 : Video mute on  
   
EXTERNAL CONTROL DEVICE SETUP  
8
08. Color/Colour (Command: k i)  
13. Treble (Command: k r)  
To adjust the screen Color(Colour).  
To adjust treble.  
You can also adjust colour in the PICTURE menu.  
You can also adjust in the AUDIO menu.  
Transmission [k][i][ ][Set ID][ ][Data][Cr]  
Transmission [k][r][ ][Set ID][ ][Data][Cr]  
Data Min : 00 to Max : 64  
Data Min : 00 to Max : 64  
Ack [i][ ][Set ID][ ][OK/NG][Data][x]  
Ack [r][ ][Set ID][ ][OK/NG][Data][x]  
09. Tint (Command: k j)  
* (Depending on model)  
To adjust the screen tint.  
You can also adjust tint in the PICTURE menu.  
14. Bass (Command: k s)  
To adjust Bass.  
Transmission [k][j][ ][Set ID][ ][Data][Cr]  
You can also adjust in the AUDIO menu.  
Data Red : 00 to Green : 64  
Ack [j][ ][Set ID][ ][OK/NG][Data][x]  
Transmission [k][s][ ][Set ID][ ][Data][Cr]  
Data Min : 00 to Max : 64  
Ack [s][ ][Set ID][ ][OK/NG][Data][x]  
10. Sharpness (Command: k k)  
* (Depending on model)  
To adjust the screen sharpness.  
You can also adjust sharpness in the PICTURE  
menu.  
15. Balance (Command: k t)  
To adjust balance.  
Transmission [k][k][ ][Set ID][ ][Data][Cr]  
You can also adjust balance in the AUDIO menu.  
Data Min : 00 to Max : 32  
Transmission [k][t][ ][Set ID][ ][Data][Cr]  
Ack [k][ ][Set ID][ ][OK/NG][Data][x]  
Data Min : 00 to Max : 64  
Ack [t][ ][Set ID][ ][OK/NG][Data][x]  
11. OSD Select (Command: k l)  
To select OSD (On Screen Display) on/off when  
16. Color(Colour) Temperature (Command: x u)  
controlling remotely.  
To adjust colour temperature. You can also adjust  
Transmission [k][l][ ][Set ID][ ][Data][Cr]  
Color(Colour) Temperature in the PICTURE menu.  
Transmission [x][u][ ][Set ID][ ][Data][Cr]  
Data 00 : OSD off  
01 : OSD on  
Data Min : 00 to Max : 64  
Ack [l][ ][Set ID][ ][OK/NG][Data][x]  
Ack [u][ ][Set ID][ ][OK/NG][Data][x]  
12. Remote control lock mode (Command: k m)  
17. ISM Method (Command: j p) (Only Plasma TV)  
To lock the front panel controls on the monitor and  
remote control.  
To control the ISM method. You can also adjust  
ISM Method in OPTION menu.  
Transmission [k][m][ ][Set ID][ ][Data][Cr]  
Transmission [j][p][ ][Set ID][ ][Data][Cr]  
Data 00 : Lock off  
01 : Lock on  
Data Min : 02: Orbiter  
08: Normal  
Ack [m][ ][Set ID][ ][OK/NG][Data][x]  
20: Color(Colour) Wash  
* If you are not using the remote control, use this  
mode.  
Ack [p][ ][Set ID][ ][OK/NG][Data][x]  
When main power is off & on (plug-off and plug-in,  
after 20 - 30 seconds), external control lock is  
released.  
* In the standby mode (DC off by off timer or ‘ka’,  
‘mc’ command), and if key lock is on, TV will not  
turn on by power on key of IR & Local Key.  
 
EXTERNAL CONTROL DEVICE SETUP  
9
* Analog Antenna/Cable  
18. Equalizer (Command : j v)  
Adjust EQ of the set.  
[Data 00][Data 01] Channel Data  
Data 00 : High byte channel data  
Data 01 : Low byte channel data  
- 00 00 ~ 00 C7 (Decimal : 0 ~ 199)  
Transmission [j][v][ ][Set ID][ ][Data][Cr]  
MSB  
0
LSB  
0
0
0
0
0
0
0
Data 02 : Input Source (Analog)  
- 00 : Antenna TV (ATV)  
- 80 : Cable TV (CATV)  
Frequency  
Data  
* Digital Antenna/Cable/Satellite  
Frequency  
1st Band  
2nd Band  
3rd Band  
4th Band  
5th Band  
7
0
0
0
0
1
6
0
0
1
1
0
5
0
1
0
1
0
4
3
2
0
0
...  
1
0
0
1
...  
Step  
0
0
...  
0
0
...  
0
0
...  
0(decimal)  
1(decimal)  
...  
[Data 00][Data 01]: Channel Data  
Data 00 : High Channel data  
Data 01 : Low Channel data  
- 00 00 ~ 27 0F (Decimal: 0 ~ 9999)  
Data 02 : Input Source (Digital)  
- 10 : Antenna TV (DTV)  
19(decimal)  
20(decimal)  
1
1
0
0
0
1
1
0
1
1
- 20 : Antenna Radio (Radio)  
- 40 : Satellite TV (SDTV)  
Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]  
* It depends on model, and can adjust when sound  
mode is EQ adjustable value.  
- 50 : Satellite Radio (S-Radio)  
- 90 : Cable TV (CADTV)  
- a0 : Cable Radio (CA-Radio)  
19. Energy Saving (Command: j q)  
* Tune Command Examples:  
To reduce the power consumption of the TV. You  
1. Tune to the Analog antenna (PAL) Channel 10.  
Set ID = All = 00  
Data 00 & 01 = Channel Data is 10 = 00 0a  
Data 02 = Analog Antenna TV = 00  
Result = ma 00 00 0a 00  
can also adjust Energy Saving in PICTURE menu.  
Transmission [j][q][ ][Set ID][ ][Data][Cr]  
Data  
00 : Off  
01 : Minimum  
02 : Medium  
03 : Maximum  
2. Tune to the digital antenna (DVB-T) Channel 01.  
Set ID = All = 00  
Data 00 & 01 = Channel Data is 1 = 00 01  
Data 02 = Digital Antenna TV = 10  
Result = ma 00 00 01 10  
04 : Auto (For LCD TV / LED TV) /  
Intelligent sensor (For PDP TV)  
05 : Screen off  
* (Depending on model)  
3. Tune to the satellite (DVB-S) Channel 1000.  
Set ID = All = 00  
Ack [q][ ][Set ID][ ][OK/NG][Data][x]  
Data 00 & 01 = Channel Data is 1000 = 03 E8  
Data 02 = Digital Satellite TV = 40  
Result = ma 00 03 E8 40  
20. Tune Command (Command: m a)  
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]  
[Data 02][x][a][ ][Set ID][ ][NG][Data 00][x]  
* This command may work differently depending on  
model and signal.  
For Europe, Mid-East, Colombia, Asia except  
South Korea and Japan Model  
Select channel to following physical number.  
For South Korea, North/Latin America except  
Colombia Model  
To tune channel to following physical/major/minor  
number.  
Transmission [m][a][ ][Set ID][ ][Data 00][ ]  
[Data 01][ ][Data 02][Cr]  
Transmission [m][a][ ][0][ ][Data00][ ][Data01]  
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]  
Digital channels have a Physical, Major, and Minor  
channel number. The Physical number is the actual  
digital channel number, the Major is the number that  
the channel should be mapped to, and the Minor is  
the sub-channel. Since the ATSC tuner automatically  
maps the channel from the Major / Minor number,  
the Physical number is not required when sending a  
command in Digital.  
   
EXTERNAL CONTROL DEVICE SETUP  
10  
* Analog Antenna/Cable  
2. Tune to the digital antenna (ATSC) channel 30-3.  
Set ID = All = 00  
Data 00 : Physical Channel Number  
Data 00 = Don’t know Physical = 00  
Data 01 & 02 = Major is 30 = 00 1E  
Data 03 & 04 = Minor is 3 = 00 03  
Data 05 = Digital Antenna TV = 22  
Total = ma 00 00 00 1E 00 03 22  
- Antenna (ATV) : 02~45 (Decimal: 2 ~ 69)  
- Cable (CATV) : 01, 0E~7D (Decimal : 1, 14~125)  
[Data 01 ~ 04]: Major/Minor Channel Number  
Data 01 & 02: xx (Don't care)  
Data 03 & 04: xx (Don't care)  
Data 05: Input Source (Analog)  
- 00 : Antenna TV (ATV)  
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]  
[Data 02][Data 03][Data 04][Data 05]  
[x][a][ ][Set ID][ ][NG][Data 00][x]  
- 01 : Cable TV (CATV)  
For Japan Model  
To tune channel to following physical/major/minor  
* Digital Antenna/Cable  
Data 00 : xx (Don't care)  
number.  
Transmission [m][a][ ][0][ ][Data00][ ][Data01]  
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]  
[Data 01][Data 02]: Major Channel Number  
Data 01 : High byte Channel Data  
Data 02 : Low byte Channel Data  
- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)  
[Data 03][Data 04]: Minor Channel Number  
Data 03 : High byte Channel Data  
Data 04 : Low byte Channel Data  
* Digital Antenna/Satellite  
Data 00: xx (Don't care)  
[Data 01][Data 02]: Major Channel Number  
Data 01: High byte Channel Data  
Data 02: Low byte Channel Data  
- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)  
Data 05 : Input Source (Digital)  
- 02 : Antenna TV (DTV) – Use Physical Channel  
Number  
[Data 03][Data 04]: Minor/Branch Channel Number  
(Don’t care in Satellite)  
- 06 : Cable TV (CADTV) – Use Physical Channel  
Number  
Data 03: High byte Channel Data  
Data 04: Low byte Channel Data  
- 22 : Antenna TV (DTV) – Don’t Use Physical  
Channel Number  
- 26 : Cable TV (CADTV) - Don’t Use Physical  
Channel Number  
- 46 : Cable TV (CADTV) – Use Physical/Major  
Channel Number Only (One Part Channel)  
- 66 : Cable TV (CADTV) – Use Major Channel  
Number Only (One Part Channel)  
- 0b : Cable DTV Plus – Use Physical Channel  
Number  
Data 05 : Input Source (Digital/Satellite for Japan)  
- 02 : Antenna TV (DTV)  
- 42 : Antenna TV (DTV) – Use Physical/Major  
Channel Number Only (One Part Channel)  
- 62 : Antenna TV (DTV) – Use Major Channel  
Number Only (One Part Channel)  
- 07 : BS (Broadcasting Satellite)  
- 08 : CS1 (Communication Satellite 1)  
- 09 : CS2 (Communication Satellite 2)  
- 2b : Cable DTV Plus – Don’t Use Physical  
Channel Number  
* Tune Command Examples:  
- 4b : Cable DTV Plus – Use Physical/Major  
Channel Number Only (One Part Channel)  
- 6b : Cable DTV Plus – Use Major Channel  
Number Only (One Part Channel)  
Two bytes are available for each major and minor  
channel data, but usually the low byte is used alone  
(high byte is 0).  
1
Tune to the digital antenna (ISDB-T) channel 17-1  
Set ID = All = 00  
.
Data 00 = Don’t know Physical = 00  
Data 01 & 02 = Major is 17 = 00 11  
Data 03 & 04 = Minor/Branch is 1 = 00 01  
Data 05 = Digital Antenna TV = 02  
Total = ma 00 00 00 11 00 01 02  
* Tune Command Examples:  
1. Tune to the Analog cable (NTSC) channel 35.  
Set ID = All = 00  
Data 00 = Channel Data is 35 = 23  
Data 01 & 02 = No Major = 00 00  
Data 03 & 04 = No Minor = 00 00  
Data 05 = Analog Cable TV = 01  
Total = ma 00 23 00 00 00 00 01  
EXTERNAL CONTROL DEVICE SETUP  
11  
2. Tune to the BS (ISDB-BS) channel 30.  
Set ID = All = 00  
24. Input select (Command: x b)  
(Main Picture Input)  
Data 00 = Don’t know Physical = 00  
Data 01 & 02 = Major is 30 = 00 1E  
Data 03 & 04 = Don’t Care = 00 00  
Data 05 = Digital BS TV = 07  
To select input source for main picture.  
Transmission [x][b][ ][Set ID][ ][Data][Cr]  
Data  
Total = ma 00 00 00 1E 00 00 07  
00 : DTV  
01 : CADTV  
10 : ATV  
* This feature is varied based on the model.  
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]  
[Data 02][Data 03][Data 04][Data 05]  
[x][a][ ][Set ID][ ][NG][Data 00][x]  
02 : Satellite DTV  
ISDB-BS (Japan)  
03 : ISDB-CS1 (Japan)  
04 : ISDB-CS2 (Japan)  
11 : CATV  
20 : AV or AV1  
21 : AV2  
40 : Component1  
60 : RGB  
41 : Component2  
21. Channel(Programme) Add/Del(Skip)  
(Command: m b)  
90 : HDMI1  
92 : HDMI3  
91 : HDMI2  
93 : HDMI4  
To skip current channel(programme) for next time.  
Transmission [m][b][ ][Set ID][ ][Data][Cr]  
Ack [b][ ][Set ID][ ][OK/NG][Data][x]  
Data 00 : Del(ATSC,ISDB)/Skip(DVB) 01 : Add  
Ack [b][ ][Set ID][ ][OK/NG][Data][x]  
* This function depends on model and signal.  
25. 3D(Command: x t) (only 3D models)  
(Depending on model)  
* Set the saved channel status to del(ATSC, ISDB)/  
skip(DVB) or add.  
To change 3D mode for TV.  
Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01]  
22. Key (Command: m c)  
[ ][Data 02][ ][Data 03][Cr]  
* (Depending on model)  
Data Structure  
Transmission [m][c][ ][Set ID][ ][Data][Cr]  
[Data 00] 00 : 3D On  
01 : 3D Off  
Data Key code - p.2.  
02 : 3D to 2D  
03 : 2D to 3D  
Ack [c][ ][Set ID][ ][OK/NG][Data][x]  
[Data 01] 00 : Top and Bottom  
01 : Side by Side  
23. Control Backlight (Command: m g)  
For LCD TV / LED TV  
To control the backlight.  
02 : Check Board  
03 : Frame Sequential  
04 : Column interleaving  
05 : Row interleaving  
[Data 02] 00 : Right to Left  
01 : Left to Right  
Transmission [m][g][ ][Set ID][ ][Data][Cr]  
Data Min : 00 to Max : 64  
Ack [g][ ][Set ID][ ][OK/NG][Data][x]  
Control Panel Light (Command: m g)  
[Data 03] 3D Effect(3D Depth): Min : 00 - Max : 14  
(*transmit by Hexadecimal code)  
For Plasma TV  
To control the panel light.  
Transmission [m][g][ ][Set ID][ ][Data][Cr]  
Data Min : 00 to Max : 64  
Ack [g][ ][Set ID][ ][OK/NG][Data][x]  
   
EXTERNAL CONTROL DEVICE SETUP  
12  
* [Data 02], [Data 03] functions depend on model  
and signal.  
3) When [Data 00] is 06, 07  
00 : Off  
01 : On  
* If [Data 00] is 00 (3D On), [Data 03] has no  
meaning.  
4) When [Data 00] is 08  
* If [Data 00] is 01 (3D off) or 02 (3D to 2D), [Data  
01], [Data 02] and [Data 03] have no meaning.  
00 : Revert to 3D video from 3D-to-2D  
converted 2D video  
01 : Change 3D video to 2D video, except  
2D-to-3D video  
* If [Data 00] is 03 (2D to 3D), [Data 01] and  
[Data 02] have no meaning.  
* If conversion condition doesn’t meet, command is  
treated as NG.  
* If [Data 00] is 00 (3D On) or 03 (2D to 3D), [Data  
03] works when 3D Mode (Genre) is manual only.  
* All 3D pattern options ([Data 01]) may not be  
available according to broadcasting/video signal.  
5) When [Data 00] is 09  
00 : Standard  
02 : Cinema  
04 : Manual  
01 : Sport  
03 : Extreme  
05 : Auto  
[Data 00]  
[Data 01]  
[Data 02]  
[Data 03]  
00  
01  
02  
03  
O
X
X
X
O
X
X
O
O
X
X
O
Ack [v][ ][Set ID][ ][OK][Data00][Data01][x]  
[v][ ][Set ID][ ][NG][Data00][x]  
27. Auto Configure (Command: j u)  
(Depending on model)  
X : don’t care  
To adjust picture position and minimize image  
shaking automatically. It works only in RGB (PC)  
mode.  
Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02]  
[Data03][x]  
[t][ ][Set ID][ ][NG][Data00][x]  
Transmission [j][u][ ][Set ID][ ][Data][Cr]  
Data 01 : To set Auto Configure  
26. Extended 3D(Command: x v) (only 3D models)  
(Depending on model)  
Ack [u][ ][Set ID][ ][OK/NG][Data][x]  
To change 3D option for TV.  
Transmission [x][v][ ][Set ID][ ][Data 00][ ]  
[Data 01][Cr]  
[Data 00] 3D option  
00 : 3D Picture Correction  
01 : 3D Depth (3D Mode is Manual Only)  
02 : 3D Viewpoint  
06 : 3D Color Correction  
07 : 3D Sound Zooming  
08 : Normal Image View  
09 : 3D Mode (Genre)  
[Data 01] It has own range for each 3D option  
determined by [Data 00].  
1) When [Data 00] is 00  
00 : Right to Left  
01 : Left to Right  
2) When [Data 00] is 01, 02  
Data  
Min: 0 - Max: 14 (*transmit by Hexadecimal  
code)  
Data value range(0 - 20) converts Viewpoint range  
(-10 - +10) automatically (Depending on model)  
* This option works when 3D Mode (Genre) is manual  
only.  
   

Toshiba Ras 10jkvp E User Manual
Toshiba E Studio 755 User Manual
Sterling Power Products 2425ce User Manual
Sanyo Ch3632 User Manual
Nordyne E3 User Manual
NEC NP04WK User Manual
Lg Dle7300we Dryer User Manual
CANON TS3100 User Manual
ATLAS SOUND MPA0802 User Manual
Above Ground Oval Pool Installation User Manual