KDC-258U
KDC-158U
KDC-118U
KDC-MP258U
KDC-MP158U
CIND-SRETCERIVUERCTION MANUAL
AMMOPLID-TUENDER’LEECMTEPURLDOEICD
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures
will help you obtain the best performance from your new
CD-receiver.
For your records
Record the serial number, found on the back of the unit, in
the spaces designated on the warranty card, and in the space
provided below. Refer to the model and serial numbers whenever
you call upon your Kenwood dealer for information or service on
the product.
Model KDC-258U/ KDC-158U/ KDC-118U/ KDC-MP258U/
KDC-MP158U Serial number
US Residents Only
Register Online
Register your Kenwood product at www.Kenwoodusa.com
© 2013 JVC KENWOOD Corporation
GET0960-001B (KN)
BASICS
Faceplate
Remote control (RC-406)
Remote sensor (Do
Attach
Detach
Volume knob
(turn/press)
not expose to bright
sunlight.)
Loading slot
Display window
* Not used.
Pull out the insulation sheet
when using for the first time.
How to reset
Detach
button
How to replace the battery
KDC-118U KDC-MP158U
KDC-MP258U
Your preset adjustments
will also be erased.
To
Do this (on the faceplate)
Do this (on the remote control)
Turn on the power
Press L SRC.
• Press and hold to turn off the power.
Press and hold SRC to turn off the power.
( Pressing SRC does not turn on the power. )
Adjust the volume
Turn the volume knob.
Press VOL
or VOL
.
Press ATT during playback to attenuate the sound.
• Press again to cancel.
Select a source
Press L SRC repeatedly.
Press SRC repeatedly.
Change the display
Press DISP SCRL repeatedly.
• Press and hold to scroll the current display information.
( not available )
*
information
KDC-MP258U KDC-MP158U
* For
/
: You can also select to turn off the display information by pressing DISP SCRL repeatedly.
3
ENGLISH |
GETTING STARTED
3
Set the initial settings
1
2
3
4
Press SRC to enter STANDBY.
Press the volume knob to enter [FUNCTION]
.
Turn the volume knob to make a selection (see the following table), then press the knob.
Press and hold
to exit.
To return to the previous setting item or hierarchy, press
.
1
Cancel the demonstration
Default: XX
When you turn on the power (or after you reset the
unit), the display shows: “CANCEL DEMO” “PRESS”
“VOLUME KNOB”
AUDIO CONTROL
SWITCH
PREOUT
REAR
terminals on the rear (through an external amplifier).
OFF 5/4 6 × 9/6 OEM: Selects according to the speaker size (5 inches or 4 inches,
/
SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out
1
Press the volume knob.
SP SELECT
/
/
/
[YES] is selected for the initial setup.
Press the volume knob again.
“DEMO OFF” appears.
6×9 inches or 6 inches) or OEM speakers for optimum performance.
2
DISPLAY
EASY MENU
KDC-258U KDC-MP258U
(For
/
)
2
ON: Both display and button illumination change to white color when entering [FUNCTION]. ;
OFF: Both display and button illumination remain as [COLOR SELECT] color. 11)
Set the clock
(
1
2
3
Press the volume knob to enter [FUNCTION].
TUNER SETTING
PRESET TYPE
Turn the volume knob to select [CLOCK], then press the knob.
Turn the volume knob to select [CLOCK ADJUST], then press
the knob.
NORMAL: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ AM). ;
MIX: Memorizes one station for each preset button, regardless of the selected band.
4
5
6
7
Turn the volume knob to make the settings, then press the knob.
Day Hour Minute
Turn the volume knob to select [CLOCK FORMAT], then press
the knob.
Turn the volume knob to select [12H] or [24H], then press
the knob.
SYSTEM
KEY BEEP
SOURCE SELECT
ON: Activates the keypress tone. ; OFF: Deactivates.
PANDORA SRC ON: Enables PANDORA in source selection. ; OFF: Disables.
IHEART SRC ON: Enables IHEARTRADIO in source selection. ; OFF: Disables.
BUILT-IN AUX ON: Enables AUX in source selection. ; OFF: Disables. 8)
: Automatically distinguishes between audio file disc and music CD. ;
music CD. No sound can be heard if an audio file disc is played.
(
8)
(
9)
Press and hold
to exit.
(
(or)
CD READ
1
2: Forces to play as an
1 Press and hold DISP SCRL to enter clock adjustment
mode directly while in clock display screen.
F/W UPDATE
UPDATE SYSTEM
2
Turn the volume knob to make the settings, then press the knob.
Day Hour Minute
F/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).
To return to the previous setting item or hierarchy, press
.
4
RADIO
Other settings
1
2
Press the volume knob to enter [FUNCTION].
Turn the volume knob to make a selection (see the following table), then press
the knob.
3
Press and hold
to exit.
To return to the previous setting item or hierarchy, press
.
Default: XX
Search for a station
TUNER SETTING
1
2
Press L SRC to select TUNER.
Press BAND repeatedly (or press AM– / #FM+ on
AUTO MEMORY YES: Automatically starts memorizing 6 stations with good reception. ; NO: Cancels.
(Selectable only if [NORMAL] is selected for [PRESET TYPE].) 4)
ON: Improves the FM reception, but the stereo effect may be lost. ; OFF: Cancels.
*
RC-406) to select FM1/ FM2/ FM3/ AM.
(
3
Press
/
(or press
/
(+) on RC-406) to
MONO SET
search for a station.
KDC-MP258U KDC-MP158U
For
/
:
• To change the searching method for
SEEK repeatedly.
AUTO1: Automatically search for a station.
AUTO2: Automatically search for a preset station.
MANUAL: Manually search for a station.
• To store a station: Press and hold one of the number
buttons (1 to 6).
/
: Press
TI
ON: Allows the unit to temporarily switch to Traffic Information. ; OFF: Cancels.
to start.
PTY SEARCH Selects the available Program Type (see below), then, press
/
CLOCK
TIME SYNC
ON: Synchronizes the unit’s time to the Radio Broadcast Data System station time. ;
OFF: Cancels.
• To select a stored station: Press one of the number
buttons (1 to 6) (or press one of the number buttons
(1 to 6) on RC-406).
•
[MONO SET] [TI]/ [PTY SEARCH] is selectable only when the band is FM1/ FM2/ FM3.
/
• Available Program Type:
INFORM (information), SPORTS
PERSNLTY (personality), PUBLIC COLLEGE HABL ESP (spanish talk), WEATHER
MUSIC ROCK CLS ROCK (classic rock), ADLT HIT (adult hits), SOFT RCK (softrock), TOP 40
COUNTRY OLDIES SOFT NOSTALGA (nostalgia), JAZZ CLASSICL (classical), R & B (rhythm and
SPEECH
:
NEWS
,
,
TALK, LANGUAGE, REL TALK (religious talk),
,
,
:
,
,
Direct Access Tuning (using RC-406)
,
,
,
,
1
2
3
Press DIRECT to enter Direct Access Tuning.
blues), SOFT R&B (soft rhythm and blues), REL MUSC (religious music), MUSC ESP (spanish
music), HIP HOP
The unit will search for the Program Type categorized under [SPEECH] or [MUSIC] if
selected.
Press the number buttons to enter a frequency.
Press ENT
to search for a station.
• To cancel, press or DIRECT.
• If the volume is adjusted during reception of traffic information or alarm, the adjusted
volume is memorized automatically. It will be applied the next time traffic information
or alarm function is turned on.
• If no operation is done for 10 seconds after step 2, Direct
Access Tuning is automatically canceled.
5
ENGLISH |
CD / USB / iPod
Start playback
The source changes automatically and
playback starts.
KDC-118U KDC-MP158U
CD
: Eject disc
Label side
To
Do this
Pause or resume
playback
Press 6
(or press ENT
on RC-406).
(+) on RC-406).
Select a track/file
Press
Press
/
(or press
/
2
*
USB
USB input terminal
Select a folder
/
(or press AM– / #FM+ on RC-406).
*
Reverse/
Press and hold
/
(or press and hold
/
(+) on RC-406).
CA-U1EX (max.: 500 mA)
(optional accessory)
Fast-forward
3
*
Repeat play
Press 4
repeatedly.
• Audio CD: TRACK REPEAT, REPEAT OFF
• MP3/WMA/WAV file or iPod: FILE REPEAT, FOLDER REPEAT, REPEAT OFF
• KENWOOD Music Editor Light (KME Light)/ KENWOOD Music Control (KMC) file
KDC-118U
iPod/iPhone (except for
/
(
11): FILE REPEAT, REPEAT OFF
KDC-MP158U
)
3
*
Random play
Press 3 or repeatedly.
USB input terminal
• Audio CD: DISC RANDOM, RANDOM OFF
• MP3/WMA/WAV file or iPod or KME Light/ KMC file: FOLDER RANDOM,
RANDOM OFF
4
*
Press and hold 3
or
to select “ALL RANDOM”.
1
*
*
*
*
You can still play/pause, file search, fast-forward or reverse files from the unit.
Only for MP3/WMA/WAV files. This does not work for iPod.
For iPod: Applicable only when [MODE OFF] is selected.
For CD: Only for MP3/WMA files.
KCA-iP102 (optional accessory)
2
3
4
Press and hold iPod to select the control
mode while in iPod source.
1
*
MODE ON: From the iPod .
If you connect the iPod/iPhone to the USB input terminal of the unit (while listening to TuneIn, TuneIn
Radio Pro or Aupeo), the unit will output the sound from these apps.
MODE OFF: From the unit.
6
CD / USB / iPod
Select a track/file from a list
Direct Music Search (using RC-406)
Set the skip search ratio
While listening to iPod or KME Light/ KMC file...
For iPod: Applicable only when [MODE OFF] is
1
2
Press DIRECT.
selected.
(
6)
Press the number buttons to enter a track/
file number.
1
Press the volume knob to enter [FUNCTION].
1
Press
.
2
Turn the volume knob to select [USB], then
press the knob.
2
Turn the volume knob to make a selection,
then press the knob.
3
Press ENT
to search for music.
3
4
Turn the volume knob to select
[SKIP SEARCH], then press the knob.
Turn the volume knob to make a selection,
then press the knob.
• To cancel, press
.
• MP3/WMA/WAV file: Select the desired
folder, then a file.
• Not available if Random Play is selected.
• Not applicable for iPod, KME Light/ KMC file.
• iPod or KME Light/ KMC file: Select the
desired file from the list (PLAYLISTS,
0.5% (default)/ 1%
/
5%/
10%: Skip search ratio
Select a song by name
over the total files.
*
ARTISTS, ALBUMS, SONGS, PODCASTS ,
5
Press and hold
to exit.
*
While listening to iPod...
GENRES, COMPOSERS ).
1
2
Press
.
*
Only for iPod.
Turn the volume knob to select a category,
then press the knob.
Change the USB drive
• To return to the root folder (or first file), press
number button 5.
When a smartphone (Mass Storage Class) is
connected to the USB input terminal, you can
select its internal memory or external memory
(such as an SD card) to playback the stored songs.
You can also select the desired drive to playback
when a multiple drives device is connected.
Press number button 5 repeatedly to select
the desired drive.
(or)
3
4
5
Turn the volume knob quickly to enter
character search.
Turn the volume knob to select the
character to be searched for.
• To return to the previous setting item or
hierarchy, press
.
• To cancel, press and hold
.
Press
position.
/
to move to the entry
If you have many files....
You can search through them quickly (on
You can enter up to 3 characters.
Press the volume knob to start searching.
Turn the volume knob to make a selection,
then press the knob.
step 2 above) at a preset skip search ratio by
6
7
pressing
/
.
• See also “Set the skip search ratio.”
1
2
Press the volume knob to enter [FUNCTION].
Turn the volume knob to select [USB], then
press the knob.
• Pressing and holding
the maximum ratio (10
setting made.
/
skip songs at
Repeat step 7 until the desired item is
%
) regardless of the
selected.
3
4
Turn the volume knob to select
[MUSIC DRIVE], then press the knob.
Press the volume knob to select
• To search for a character other than A to Z
• For USB: Only for files registered in the
database created with KME Light/ KMC.
• Not applicable for audio CD.
and 0 to 9, enter only “ ”.
*
• To return to the previous hierarchy, press
[DRIVE CHANGE]
.
.
The next drive is selected automatically.
Repeat steps 1 to to select the following drives.
Selectable items: [DRIVE 1] to [DRIVE 5]
• To return to the top menu, press number
4
button 5.
• To cancel, press and hold
.
7
ENGLISH |
KDC-158U
KDC-258U
AUX
Pandora® (for
/
)
Preparation:
Preparation:
To
Do this
Select [ON] for [BUILT-IN AUX]
.
(
4)
Install the latest version of the Pandora
application onto your device (iPhone/
iPod touch), then create an account and
log in to Pandora.
Pause or resume
playback
Press 6
on RC-406).
(or press ENT
Start listening
1
Connect a portable audio player
(commercially available).
Thumbs up or
thumbs down
Press
/
.
• Select [ON] for [PANDORA SRC]
.
(
4)
• If thumbs down is selected, the
current track is skipped.
Auxiliary input jack
Start listening
Skip a track
Press
(or press
(+) on
1
Open the Pandora application on
RC-406).
your device.
2
Connect your device to the USB
input terminal.
Create a new
station
1
2
Press and hold the volume
knob.
Turn the volume knob to
select [FROM TRACK] or [FROM
ARTIST], then press the knob.
A new station is created based
on the current song or artist.
Portable audio
player
3.5 mm (1/8") stereo mini plug with
“L” shaped connector (commercially
available)
USB input terminal
2
3
Press SRC to select AUX.
Turn on the portable audio player and
start playback.
Save a station
Press and hold one of the
number buttons (1 to 5) to
store.
• To select a stored station, press
one of the number buttons
(1 to 5).
KCA-iP102 (optional accessory)
Set the AUX name
The source changes to PANDORA and
broadcast starts.
While listening to a portable audio player
connected to the unit...
1
2
Press the volume knob to enter [FUNCTION].
Search for a
registered
station
1
2
Press
.
Turn the volume knob to select [SYSTEM]
,
Turn the volume knob to
then press the knob.
make a selection, then press
3
4
Turn the volume knob to select [AUX NAME
the knob (or press
RC-406).
/
on
SET], then press the knob.
Turn the volume knob to make a selection,
then press the knob.
[BY DATE]: According to the
registered date.
[A-Z]: Alphabetical order.
Turn the volume knob to the
desired station, then press the
knob.
AUX (default)/ DVD PORTABLE/ GAME/ VIDEO/ TV
/
5
Press and hold
to exit.
3
8
KDC-158U
KDC-258U
iHeartRadio® (for
/
)
Preparation:
To
Do this
Skip cities by alphabetical order
Install the latest version of iHeart Link for
KENWOOD application onto your device
(iPhone/ iPod touch), then create an account
and log in to iHeartRadio.
While a city list appears during search...
Pause or
resume
playback
Press 6
(or press ENT
1
2
3
4
Turn the volume knob quickly to enter
character search.
on RC-406).
Turn the volume knob or press
/
to
• Select [ON] for [IHEART SRC]
.
(
4)
Thumbs up or
thumbs down
for custom
station
Press
/
.
select the character to be searched for.
• If thumbs down is selected,
Start listening
Press
page.
/
to move to the previous/next
the current track is skipped.
1
Open the iHeart Link application on
Press the volume knob to start searching.
your device.
Skip a track for
custom station
Press
RC-406).
(or press
(+) on
• To cancel, press and hold
.
2
Connect your device to the USB input
terminal.
Create a new/
custom station
Press 1.
Delete a station
USB input terminal
While listening to IHEARTRADIO...
Add to favorite
stations for live
station
Press 2.
1
2
Press the volume knob to enter [FUNCTION].
Turn the volume knob to select [SYSTEM]
then press the knob.
,
3
4
5
Turn the volume knob to select [STATION
DEL], then press the knob.
Turn the volume knob to select [LIVE] or
[CUSTOM], then press the knob.
Turn the volume knob to select the
desired station to delete, then press the
knob.
Turn the volume knob to select [YES], then
Scan for live
station
Press 5.
KCA-iP102 (optional accessory)
3
Press L SRC to select IHEARTRADIO.
Broadcast starts automatically.
Search for a station
Press
1
2
.
Turn the volume knob to select a category,
then press the knob.
6
7
press the knob.
Press and hold
3
Turn the volume knob to the desired station,
then press the knob.
to exit.
To return to the previous setting item or
hierarchy, press
When a city list appears, you can skip cities in
alphabetical order.
.
(or using RC-406)
Press
/
to search for a station.
• To cancel, press and hold
.
9
ENGLISH |
AUDIO SETTINGS
While listening to any source...
SUB-W PHASE
REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum performance.
(Selectable only if a setting other than [THROUGH] is selected for
[LPF SUBWOOFER].)
1
2
3
Press the volume knob to enter [FUNCTION].
Turn the volume knob to select [AUDIO CONTROL], then press the knob.
Turn the volume knob to make a selection (see the following table),
then press the knob.
FADER
R15 to F15
(0): Adjusts the rear and front speaker output balance.
): Adjusts the left and right speaker output balance.
Repeat step 3 until the desired item is selected or activated.
4
Press and hold
to exit.
BALANCE
L15 to R15
(
0
(or using RC-406)
1 Press AUD to enter [AUDIO CONTROL]
2 Press to make a selection, then press ENT
0
.
/
.
SOUND RECNSTR ON: Creates realistic sound by compensating the high-frequency
To return to the previous setting item or hierarchy, press
.
(Sound
components and restoring the rise-time of the waveform that are lost
reconstruction)
in audio data compression. ; OFF: Cancels.
Default: XX
•
[SUB-W LEVEL]
selectable only if [SWITCH PREOUT] is set to [SUB-W]
• [SUB-W LEVEL] [LPF SUBWOOFER] [SUB-W PHASE] is selectable only if
[SUBWOOFER SET] is set to [ON]
/
[SUBWOOFER SET]
/
[LPF SUBWOOFER]
/
[SUB-W PHASE] is
SUB-W LEVEL
BASS LEVEL
MID LEVEL
TRE LEVEL
–15 to +15 (0): Adjusts the subwoofer output level.
.
(
4)
–8 to +8 (+6):
/
/
Adjusts the level to memorize for each source. (Before
.
–8 to +8 (+5): making an adjustment, select the source you want
to adjust.)
–8 to +8 (0):
PRESET EQ
DRIVE EQ/ TOP40/ POWERFUL/ ROCK/ POPS/ EASY/ JAZZ/ NATURAL/
USER: Selects a preset equalizer suitable to the music genre. (Select
[USER] to use the customized bass, middle, and treble settings.)
[DRIVE EQ] is a preset equalizer that reduces noise from the road.
BASS BOOST
LOUDNESS
LV1
/
LV2
/
LV3: Selects your preferred bass boost level. ; OFF: Cancels.
Muting upon the reception of a phone call
LV1
/
LV2: Selects your preferred low and high frequencies boost to
Connect the MUTE wire to your telephone using a commercial
produce a well-balanced sound at a low volume level. ; OFF: Cancels.
telephone accessory.
(
15)
SUBWOOFER SET ON: Turns on the subwoofer output. ; OFF: Cancels.
When a call comes in, “CALL” appears. (The audio system pauses.)
• To continue listening to the audio system during a call, press SRC.
“CALL” disappears and the audio system resumes.
LPF SUBWOOFER THROUGH: All signals are sent to the subwoofer. ; 85HZ 120HZ/
/
160HZ: Audio signals with frequencies lower than 85 Hz/ 120 Hz/ 160 Hz
are sent to the subwoofer.
When the call ends, “CALL” disappears. (The audio system resumes.)
10
DISPLAY SETTINGS
MORE INFORMATION
General
• This unit can only play the following CDs:
1
Press the volume knob to enter [FUNCTION]
Turn the volume knob to select [DISPLAY], then
press the knob.
.
About KENWOOD Music Editor Light
and KENWOOD Music Control
• This unit supports the PC application KENWOOD Music
Editor Light and Android™ application KENWOOD Music
Control.
• When you play audio files with song data added using
the KENWOOD Music Editor Light or KENWOOD Music
Control, you can search for audio files by Genres, Artists,
Albums, Playlists, and Songs.
2
3
Turn the volume knob to make a selection
(see the following table), then press the knob.
Repeat step 3 until the desired item is selected
or activated.
• Detailed information and notes about the playable audio
files are stated in an online manual on the following web
4
Press and hold
to exit.
To return to the previous setting item or hierarchy,
Playable files
• KENWOOD Music Editor Light and KENWOOD Music
Control are available on the following web site:
press
.
• Playable audio file: MP3 (.mp3), WMA (.wma)
• Playable disc media: CD-R/CD-RW/CD-ROM
• Playable disc file format: ISO 9660 Level 1/2, Joliet, Long
file name.
Default: XX
COLOR
VARIABLE SCAN
/
COLOR 01
—
COLOR 24
/
About iPod/iPhone
Made for
- iPod touch (1st, 2nd, 3rd, 4th, and 5th generation)
- iPod classic
- iPod nano (3rd, 4th, 5th, 6th, and 7th generation)
- iPhone, iPhone 3G, 3GS, 4, 4S, 5
• For the latest compatible list and software versions of
• To connect devices featuring Lightning connector, both
KCA-iP102 (optional accessory) and Apple Lightning
to 30-pin Adapter (accessory of the iPod/iPhone) are
required.
Do not leave the Apple Lightning to 30-pin Adapter
inside the car to prevent damages caused by the hot
temperature.
SELECT*
USER: Selects your preferred button
• Playable USB device file system: FAT12, FAT16, FAT32
Even when audio files comply with the standards listed
above, playback may be impossible depending on the types
or conditions of media or device.
illumination color.
You can create your own color (when
[COLOR 01]
selected). The color you have created can be
selected when you select [USER]
—
[COLOR 24] or [USER] is
Unplayable discs
• Discs that are not round.
• Discs with coloring on the recording surface or discs that
are dirty.
• Recordable/ReWritable discs that have not been
finalized.
.
1
2
3
Press and hold the volume knob to enter
the detailed color adjustment.
Press to select the color (
) to adjust.
Turn the volume knob to adjust the level
), then press the knob.
/
R
/
G
/
B
• 8 cm CD. Attempting to insert using an adapter may
cause malfunction.
(
0
—
9
DIMMER
ON: Dims the display illumination (and button
illumination*). ; OFF: Illuminates according to
the [BRIGHTNESS] settings.
About USB devices
• This unit can play MP3/WMA/WAV files stored on a USB
mass storage class device.
• You cannot connect a USB device via a USB hub.
• Connecting a cable whose total length is longer than 5 m
may result in abnormal playback.
• This unit cannot recognize a USB device whose rating is
other than 5 V and exceeds 1 A.
• You cannot operate iPod if “KENWOOD” or “ ” is
displayed on iPod.
BRIGHTNESS LVL 0
—
LVL 31: Selects your preferred
brightness level for display illumination (and
button illumination*).
TEXT SCROLL AUTO ONCE: Selects whether to scroll the
/
display information automatically, or scroll
only once. ; OFF: Cancels.
KDC-MP258U
KDC-258U
* For
/
.
11
ENGLISH |
MORE INFORMATION
TROUBLESHOOTING
About Pandora
Symptom
Sound cannot be heard.
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
• Pandora is available only in the U.S., Australia and
New Zealand.
• Because Pandora is a third-party service, the
specifications are subject to change without prior
notice. Accordingly, compatibility may be impaired, or
some or all of the services may become unavailable.
• Some functions of Pandora cannot be operated from
this unit.
• For issues using the application, please contact
Pandora at [email protected].
• If the version of the OS of the connected iPhone is
earlier than 4.0, start the Pandora application before
selecting the PANDORA source.
“PROTECT” appears and no operations
can be done.
Check to be sure the terminals of the speaker wires are insulated properly, then reset
the unit. If this does not solve the problem, consult your nearest service center.
• Sound cannot be heard.
• The unit does not turn on.
• Information shown on the display is
incorrect.
Clean the connectors.
(
2)
The unit does not work at all.
• Radio reception is poor.
• Static noise while listening to the radio. • Pull the antenna out all the way.
Reset the unit.
(
3)
• Connect the antenna firmly.
About iHeartRadio
“NA FILE” appears.
Make sure the disc contains supported audio files.
(
11)
• iHeartRadio® is a third-party service, therefore the
specifications are subject to change without prior
notice. Accordingly, compatibility may be impaired or
some or all of the services may become unavailable.
• Some iHeartRadio® functionality cannot be operated
from this unit.
“NO DISC” appears.
Insert a playable disc into the loading slot.
“TOC ERROR” appears.
“PLEASE EJECT” appears.
Disc cannot be ejected.
Make sure the disc is clean and inserted properly.
Reset the unit. If this does not solve the problem, consult your nearest service center.
Press and hold to forcibly eject the disc. Be careful not to drop the disc when it is
ejected. If this does not solve the problem, reset the unit.
(
3)
“READ ERROR” appears.
Copy the files and folders onto the USB device again. If this does not solve the
problem, reset the USB device or use another USB device.
“NO DEVICE” appears.
“COPY PRO” appears.
“NA DEVICE” appears.
“NO MUSIC” appears.
“iPod ERROR” appears.
Connect a USB device, and change the source to USB again.
A copy-protected file is played.
Connect a supported USB device, and check the connections.
Connect a USB device that contains playable audio files.
• Reconnect the iPod.
• Reset the iPod.
Noise is generated.
Skip to another track or change the disc.
Tracks do not play back as you intended
them to play.
Playback order is determined when files are recorded.
12
TROUBLESHOOTING
Symptom
Remedy
Symptom
“NOT CONNECTED”
Remedy
Link to the application is impossible.
“READING” keeps flashing.
Do not use too many hierarchical levels or folders.
This is caused by how the tracks are recorded.
“IHEARTLINK UP”
Make sure you have installed the latest version of the
iHeart Link for KENWOOD application on your device.
Elapsed playing time is not
correct.
“PLEASE LOGIN”
You haven’t log in. Log in again.
Broadcast from the station is over.
Correct characters are not
displayed (e.g. album name).
This unit can only display uppercase letters, numbers, and
a limited number of symbols.
“STATION NOT
AVAILABLE”
“ADD ERROR”
New station creation is unsuccessful.
“SEARCH ERROR”
“STATION NOT
SELECTED”
No station is selected.
“CHECK DEVICE”
“NO SKIPS”
Check the Pandora application on your device.
The skip limit has been reached.
No stations are found.
“STREAM ERROR”
“THUMB FAILED”
“TIMED OUT”
Broadcast data is interrupted.
Registration of Thumbs Up/Down has failed.
The request has resulted in time-out.
“NO STATIONS”
“STATION LIMIT”
The number of registered stations has reached its limit.
Retry after deleting unnecessary stations from your device.
“UPGRADE APP”
Make sure you have installed the latest version of the
Pandora application on your device.
“CONNECT ERROR”
“RATING ERROR”
“LICENSE ERROR”
Communication is unstable.
Registration of thumbs up/thumbs down has failed.
You try to access from a country which Pandora is not
deliverable.
Station cannot be
selected.
If “Explicit Content” in [Account Settings] is checked in
the web version of iHeartRADIO, custom stations become
unavailable.
“CANNOT CREATE”
“CANNOT SAVE”
“DISCONNECTED”
“NO SKIPS”
Custom station name creation is unsuccessful.
Addition to the favorite category failed.
Check the connection to the device.
The skip limit has been reached. Retry later.
No stations are found.
“NO STATIONS”
13
ENGLISH |
Warning
Installing the unit (in-dash mounting)
• The unit can only be used with a 12 V DC power supply, negative
ground.
• Disconnect the battery’s negative terminal before wiring and
mounting.
• Do not connect Battery wire (yellow) and Ignition wire (red) to the
car chassis or Ground wire (black) to prevent a short circuit.
• Insulate unconnected wires with vinyl tape to prevent a short circuit.
• Be sure to ground this unit to the car’s chassis again after
installation.
Do the required wiring.
15)
(
Hook on the top side
Caution
• For safety’s sake, leave wiring and mounting to professionals.
Consult the car audio dealer.
Dashboard of
your car
Orientate the trim plate as
illustrated before fitting.
• Install this unit in the console of your vehicle. Do not touch the metal
parts of this unit during and shortly after use of the unit. Metal parts
such as the heat sink and enclosure become hot.
• Do not connect the wires of speakers to the car chassis or Ground
wire (black), or connect them in parallel.
Bend the appropriate tabs to hold the
mounting sleeve firmly in place.
•
Mount the unit at an angle of less than 30º.
• If your vehicle wiring harness does not have the ignition terminal,
connect Ignition wire (red) to the terminal on the vehicle’s fuse box
which provides 12 V DC power supply and is turned on and off by the
ignition key.
• After the unit is installed, check whether the brake lamps, blinkers,
wipers, etc. on the car are working properly.
When installing without the mounting sleeve
1
Remove the mounting sleeve and trim plate from
the unit.
2
Align the holes in the unit (on both sides) with the
vehicle mounting bracket and secure the unit with
screws (commercially available).
• If the fuse blows, first make sure the wires are not touching car’s
chassis, then replace the old fuse with one that has the same rating.
Use only the specified screws. Using wrong screws might damage the unit.
Basic procedure
How to remove the unit
1
2
3
Remove the key from the ignition switch, then
disconnect the terminal of the car battery.
Connect the wires properly.
1
2
Detach the faceplate.
Fit the catch pin on the extraction keys
into the holes on both sides of the trim
plate, then pull it out.
See Wiring connection.
(
15)
Install the unit to your car.
3
Insert the extraction keys deeply into the
slots on each side, then follow the arrows
as shown on the right.
See Installing the unit (in-dash mounting).
Connect the terminal of the car battery.
4
5
Reset the unit.
(
3)
14
Wiring connection
Part list for installation
KDC-258U
KDC-158U
KDC-118U
KDC-MP258U
KDC-MP158U
(A) Faceplate
Front output
Rear/ subwoofer output
Rear/ subwoofer output
Fuse (10 A)
Antenna terminal
(B) Trim plate
If no connections are made, do not let the wire
come out from the tab.
White
Light blue/yellow
KDC-MP258U KDC-MP158U
For
/
:
To front speaker (left)
White/Black
To the steering wheel remote control
adapter
(Steering remote
control wire)
(C) Mounting sleeve
Gray
To front speaker (right)
To rear speaker (left)
Gray/Black
To the power control terminal when using
the optional power amplifier, or to the
antenna control terminal in the vehicle.
Blue/White
Green
(Power control wire)
Green/Black
(D) Wiring harness
Purple
To rear speaker (right)
Ignition switch
Purple/Black
To the terminal that is grounded when the
telephone rings or during conversation.
(To connect the Kenwood navigation system,
refer your navigations manual.)
Brown
(Mute control wire)
Car fuse box
Red
(E) Extraction key
(Ignition wire)
Blue
Yellow
(Not used)
Car fuse box
(Antenna control
wire)
(Battery wire)
Black (Ground wire)
To the metallic body or chassis
of the car
Battery
15
ENGLISH |
SPECIFICATIONS / SPÉCIFICATIONS / ESPECIFICACIONES
FM Frequency Range / Bande de fréquences / Gama de frecuencias
KDC-258U
/
KDC-158U KDC-118U
/
87.9 MHz — 107.9 MHz (200 kHz space / intervalle de / espacio)
KDC-MP258U KDC-MP158U
/
87.5 MHz — 108.0 MHz (50 kHz space / intervalle de / espacio)
8.2 dBf (0.71 μV/75 Ω)
Usable Sensitivity / Sensibilité utilisable / Sensibilidad útil (S/N = 26 dB)
Quieting Sensitivity / Seuil de sensibilité / Sensibilidad de silenciamiento
(DIN S/N = 46 dB)
17.2 dBf (2.0 μV/75 Ω)
Frequency Response / Réponse en fréquence / Respuesta de frecuencia ( 3 dB)
Signal-to-Noise Ratio / Taux de Signal/Bruit / Relación señal a ruido (MONO)
Stereo Separation / Séparation stéréo / Separación estéreo (1 kHz)
30 Hz — 15 kHz
64 dB
40 dB
AM Frequency Range / Bande de fréquences / Gama de frecuencias
Usable Sensitivity / Sensibilité utilisable / Sensibilidad útil (S/N = 20 dB)
530 kHz — 1 700 kHz (10 kHz space / intervalle de / espacio)
29 dBμ (28.2 μV)
Laser Diode / Diode laser / Diodo láser
GaAIAs
Digital Filter / Filtre numérique / Filtro digital (D/A)
8 times over sampling / 8 fois suréchantillonnage / 8 veces sobremuestreo
500 rpm — 200 rpm / 500 t/min. — 200 t/min. / 500 rpm — 200 rpm (CLV)
Below measurable limit / Non mesurables / Por debajo del límite medible
20 Hz — 20 kHz
Spindle Speed / Vitesse de rotation / Velocidad de giro
Wow & Flutter / Pleurage et scintillement / Fluctuación y trémolo
Frequency Response / Réponse en fréquence / Respuesta de frecuencia ( 1 dB)
Total Harmonic Distortion / Distorsion harmonique totale / Distorsión armónica total
(1 kHz)
0.01 %
Signal-to-Noise Ratio / Taux de Signal/Bruit / Relación señal a ruido (1 kHz)
Dynamic Range / Gamme dynamique / Gama dinámica
105 dB
90 dB
85 dB
Channel Seperation / Séparation des canaux / Separación de canales
MP3 Decode / Décodage MP3 / MP3 decodificado
Compliant with MPEG-1/2 Audio Layer-3 / Compatible avec le format MPEG-1/2 Audio
Layer-3 / Compatible con MPEG-1/2 Audio Layer-3
WMA Decode / Décodeur WMA / WMA decodificado
Compliant with Windows Media Audio / Compatible Windows Media Audio /
Compatible con Windows Media Audio
i
Subject to change without notice. / Sujet à changement sans notification. / Sujeto a cambios sin previo aviso.
USB Standard / Standard USB / Estándar USB
USB 1.1, USB 2.0 (Full speed / Vitesse maximale / Alta velocidad)
Maximum Supply Current / Courant d’alimentation maximum /
Corriente de alimentación máxima
DC 5 V 1 A
File System / Système de fichiers / Sistema de archivos
MP3 Decode / Décodage MP3 / MP3 decodificado
FAT12/16/ 32
Compliant with MPEG-1/2 Audio Layer-3 / Compatible avec le format MPEG-1/2 Audio
Layer-3 / Compatible con MPEG-1/2 Audio Layer-3
Compliant with Windows Media Audio / Compatible Windows Media Audio /
Compatible con Windows Media Audio
WMA Decode / Décodeur WMA / WMA decodificado
WAV Decode / Décodeur WAV / WAV decodificado
Linear-PCM / PCM linéaire / PCM lineal
Maximum Output Power / Puissance de sortie maximum / Potencia de salida máxima
Full Bandwidth Power / Pleine Puissance de Largeur de Bande /
Potencia en todo el ancho de banda
50 W × 4
22 W × 4 (at less than 1 % THD / avec moins de 1 % DHT / a menos del 1 % THD)
Speaker Impedance / Impédance d’enceinte / Impedancia del altavoz
Tone Action / Action en tonalité / Acción tonal
4 Ω — 8 Ω
Bass / Graves / Graves
Middle / Médiums / Registro medio
Treble / Aiguës / Agudos
2 500 mV/10 kΩ
200 Hz 8 dB
2.5 kHz 8 dB
12.5 kHz 8 dB
Preout Level/Load (CD) / Niveau de préamplification/charge (CD) /
Nivel de salida de preamplificador/carga (CD)
Preout Impedance / Impédance du préamplificateur /
Impedancia de salida de preamplificador
≤ 600 Ω
Frequency Response / Réponse en fréquence / Respuesta de frecuencia ( 3 dB)
Input Maximum Voltage / Tension maximum d’entrée / Voltaje de entrada máximo
Input Impedance / Impédance d’entrée / Impedancia de entrada
20 Hz — 20 kHz
1 200 mV
30 kΩ
Operating Voltage / Tension de fonctionnement / Voltaje de trabajo
Maximum Current Consumption / Consommation de courant maximale /
Consumo de corriente máxima
14.4 V (10.5 V — 16 V allowable / admissible / admisibles)
10 A
Operational Temperature Range / Plage de températures de fonctionnement /
Gama de temperaturas de funcionamiento
0°C — +40°C
Installation Size (W × H × D) / Dimensions d’installation (L × H × P) /
Tamaño de instalación (An × Al × F)
Weight / Poids / Peso
182 mm × 53 mm × 159 mm
(7-3/16" × 2-1/8" × 6-1/4")
1.2 kg (2.65 lbs)
ii
ENGLISH / FRANÇAIS / ESPAÑOL |
CAUTION
• “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed
to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer
to meet Apple performance standards. Apple is not responsible for the operation of this
device or its compliance with safety and regulatory standards. Please note that the use of this
accessory with iPod or iPhone may affect wireless performance.
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
In compliance with Federal Regulations, following are reproductions of labels on, or
inside the product relating to laser product safety.
• iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in
the U.S. and other countries.
• Lightning is a trademark of Apple Inc.
• Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered
trademarks of Pandora Media, Inc., used with permission.
• iHeartRadio® is a registered mark of Clear Channel Broadcasting, Inc. in the United States and
other countries. Such marks are used under license.
JVC KENWOOD Corporation
2967-3, ISHIKAWA-MACHI,
HACHIOJI-SHI, TOKYO, JAPAN
THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR
SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE.
• Android is trademark of Google Inc.
Location : Top Plate
FCC WARNING
Información acerca de la eliminación de equipos eléctricos y electrónicos al final de
la vida útil (aplicable a los países que hayan adoptado sistemas independientes de
recogida de residuos)
This equipment may generate or use radio frequency energy. Changes or modifications
to this equipment may cause harmful interference unless the modifications are
expressly approved in the instruction manual. The user could lose the authority to
operate this equipment if an unauthorized change or modification is made.
Los productos con el símbolo de un contenedor con ruedas tachado no podrán
ser desechados como residuos domésticos. Los equipos eléctricos y electrónicos
al final de la vida útil, deberán ser reciclados en instalaciones que puedan dar
el tratamiento adecuado a estos productos y a sus subproductos residuales
correspondientes. Póngase en contacto con su administración local para
obtener información sobre el punto de recogida más cercano. Un tratamiento
correcto del reciclaje y la eliminación de residuos ayuda a conservar los recursos
y evita al mismo tiempo efectos perjudiciales en la salud y el medio ambiente.
FCC NOTE
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment may cause harmful interference to radio communications, if it is not
installed and used in accordance with the instructions. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
CALIFORNIA, USA ONLY
This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material—
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Informação sobre a eliminação de pilhas
Este produto não deve ser eliminado como lixo doméstico geral. Devolva a pilha usada ao
revendedor ou entidade autorizada para que a mesma seja devolvida ao fabricante ou importador.
A reciclagem e a eliminação de lixo de maneira apropriada ajudarão a conservar os recursos
naturais ao mesmo tempo que prevenirão os efeitos prejudicais à nossa saúde e ao meio ambiente.
• Consult the dealer or an experienced radio/TV technician for help.
|