QUICK-START GUIDE*
WARRANTY
G
for PRO-TILL 10/13
REMEMBER! You must complete Product
* Refer to operators manual for complete safety and operation info.
Registration to be eligible for Warranty.
Connect tractor to 3-point hitch.
A
B
(NOTE: Adjust pin locations to coincide with CAT size of tractor’s 3-point system.)
1
Connect Hydraulics
DEPTH
1
1
Lower Machine
C
Set Cutting Depth
IMPORTANT: Cycle oil in the Depth Control Cylinder
D
Depth Adjustment
(Depth Control on
Cylinder)
1
before use.
1
This is especially important after long periods of storage.
Start with 14 stops.
Test depth & adjust.
Typically
Set to 2”
142767 v1.0
|