Siig 04 0599a User Manual

Solar Portable Battery Charger  
Quick Installation Guide  
Introducing the Solar Portable Battery Charger  
The Solar Portable Charger Battery easily charges electronic  
deviceswhileonthego,includingiPhone®/iPod®,mobile,  
phones, PDAs, portable game systems, MP3 players or  
more.  
KeyFeaturesandBenefits  
High-quality rechargeable Lithium-ion battery  
recharges easily via solar power or computer  
systems USB port (with included USB charging  
cable)  
Extends talk time up to 2 hours, up to 4 hours of  
video, or up to 20 hours of music  
IncludesadaptertipsforusewithvariousMotorola,  
Samsung, LG, Blackberry®, Palm, Nokia, and more  
SystemRequirements  
Desktop or notebook computer with an available  
USB port  
AdditionalAdapterTips  
Additional adapter tips are available for purchase at  
04-0599A  
1
AdapterTips  
Motorola/Blackberry/MicroUSB  
Motorola/Blackberry/MiniUSB  
LG  
Nokia  
Samsung  
Figure 3  
Note: For an updated list of compatible phone  
models or to purchase additional adapter tips,  
3
ConnectingAdapterTip  
Figure 4  
Operating Instructions  
The Solar Portable Battery Charger can be charged in two  
ways, by exposing the solar panel to sunlight or by  
connecting it to a desktop or notebook using the USB  
charging cable included.  
Charging the Battery Using the Solar Panel  
Expose the face of the solar panel to sunlight. LED C will  
go on indicating that the charge has begun. The time  
required to fully charge the battery is dependent on the  
quality of light available. The stronger the light is, the  
faster the battery will be charged.  
4
It takes a shorter time to charge the battery under the  
direct sunlight (it should take approximately 11 hours to  
fullychargethebatteryunderstrongsunlight). LEDCwill  
switch off when the battery is fully charged.  
Charging the Battery Using a Computer  
1.  
2.  
3.  
Find the proper adapter tip (included or buy  
separately) and connect to the DC Jack of the  
supplied USB charging cable, see Figure 4 on page  
4. Then connect it to the INPUT (Mini USB port) of  
the Solar Portable Battery Charger.  
Connect the USB type A plug of the supplied USB  
charging cable to an available USB port of your  
desktop or notebook computer (make sure the  
systemisturnedon). LEDAwillturnon,indicating  
thechargingprocesshasbegun,seeFigure5below.  
When LED A goes off, the Solar Portable Battery  
Charger is now fully charged. Expect 3-4 hours to  
fully charge the battery.  
Figure 5  
5
RechargingYourPortableDevices  
When your portable device is out of battery, you can  
recharge with the Solar Portable Battery Charger easily. Just  
makesuretheSolarPortableBatteryChargerisfullycharged  
before proceeding.  
1.  
Connect the USB type A plug of the supplied USB  
charging cable to the OUTPUT (USB port) of the  
Solar Portable Battery Charger.  
2.  
Find the proper adapter tip (included or buy  
separately) and connect to the DC Jack of the  
supplied USB charging cable. Then plug it to your  
device. See Figure 6 below.  
3.  
4.  
During charging, all LEDs will turn red to show  
working status and remaining power.  
The time taken to fully charge the portable device  
is determined by the Lithium-ion battery capacity  
of the portable device.  
Figure 6  
6
Recharging Your iPod and iPhone  
When your iPod and iPhone is out of battery, you can  
recharge it with the Solar Portable Battery Charger easily.  
Just make sure the Solar Portable Battery Charger is fully  
charged before proceeding.  
1.  
ConnecttheAppleUSB2.0chargingcable(supplied  
with iPod/iPhone) to your iPod or iPhone  
2.  
Connect the USB type A plug of the Apple USB 2.0  
charging cable to the OUTPUT (USB port) of the  
Solar Portable Battery Charger. See Figure 7 below.  
3.  
4.  
During charging, all LEDs will turn red to show  
working status and remaining power.  
The time taken to fully charge the iPod/iPhone is  
determined by the Lithium-ion battery capacity of  
the iPod/iPhone.  
Figure 7  
7
LED Indicator When Charging Portable Device  
The front panel of your charger includes 3 LED lights to  
show the working status and the remaining power. You  
can read the working status from numbers of the light  
indicators.  
One LED: 10%-35% charge  
Two LEDs: 35%-70% charge  
Three LEDs: 70%-100% charge  
8
Blank Page  
9
Blank Page  
10  
Technical Support and Warranty  
QUESTIONS? SIIGsOnlineSupporthasanswers! Simplyvisitourwebsiteat  
www.siig.comandclick Support. Ouronlinesupportdatabaseisupdateddaily  
with new drivers and solutions. Answers to your questions could be just a few  
clicks away. You can also submit questions online and a technical support  
analysts will promptly respond.  
SIIGoffersa2-yearmanufacturerwarrantywiththisproduct. Pleaseseeourweb  
siteformorewarrantydetails. Ifyouencounteranyproblemswiththisproduct,  
pleasefollowtheproceduresbelow.  
Ifitiswithinthestore'sreturnpolicyperiod,pleasereturntheproducttothestore  
whereyoupurchasedfrom. Ifyourpurchasehaspassedthestore'sreturnpolicy  
period, pleasefollowthesestepstohavetheproductrepairedorreplaced.  
Step 1: Submit your RMA request.  
Go to www.siig.com, click Support, then RMA to submit  
a
request to SIIG RMA. If the product is determined to be  
defective, an RMAnumber willbeissued.  
Step 2: After obtaining an RMA number, ship the product.  
Properlypacktheproductforshipping. Allaccessories thatcamewith  
theoriginalpackagemustbeincluded.  
ClearlywriteyourRMAnumberonthetopofthereturnedpackage. SIIG  
will refuse to accept any shipping package, and will not be responsible  
foraproductreturnedwithoutanRMAnumberpostedontheoutsideof  
theshippingcarton.  
You are responsible for the cost of shipping. Ship the product to the  
followingaddress:  
SIIG,Inc.  
6078 Stewart Avenue  
Fremont, CA 94538-3152, USA  
RMA#:  
SIIG will ship the repaired or replaced product via Ground  
in the U.S. and International Economy outside of the U.S. at  
no cost to the customer.  
11  
About SIIG, Inc.  
Foundedin1985,SIIG,Inc.isaleadingcomputerupgrademanufacturerofI/O  
connectivityproducts,includingPCI&ISAserialandparallelports,USB,Serial  
ATA & UltraATA controllers, FireWire (1394a/b), networking, sound cards,  
andotheraccessories. SIIGisthepremierone-stopsourceofupgrades.  
SIIGproductsoffercomprehensiveusermanuals,manyuser-friendlyfeatures,  
and are backed by an extensive manufacturer warranty. High-quality control  
standards are evident by the overall ease of installation and compatibility of  
ourproducts, aswellasoneofthelowestdefectivereturnratesintheindustry.  
SIIG products can be found in computer retail stores, mail order catalogs,  
throughmajordistributors, systemintegrators, andVARsintheAmericasand  
theUK,andthroughe-commercesites.  
PRODUCT NAME  
Solar Portable Battery Charger  
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B  
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE  
FCCCOMPLIANCESTATEMENT:  
This device complies with part 15 of the FCC Rules. Operation is subject  
to the following two conditions: (1) This device may not cause harmful  
interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE  
SIIG, Inc.  
6078 Stewart Avenue  
Fremont, CA 94538-3152, USA  
Phone: 510-657-8688  
Solar Portable Battery Charger is a trademark of SIIG, Inc. SIIG and the SIIG logo are  
registeredtrademarksofSIIG,Inc. Othernamesusedinthispublicationareforidentification  
only and may be trademarks of their respective companies.  
October, 2009  
Copyright © 2009 by SIIG, Inc. All rights reserved.  

Lanier 5613 User Manual
Mitsubishi Electronics Cp 31w User Manual
Mitsubishi Electronics Lossnay Lgh 25rx4 E User Manual
Samsung Clp 310kg User Manual
Sanyo Kr 1700au User Manual
Schneider Electric Duradrive Direct Coupled Actuators Ma40 704x User Manual
Silva Battery Charger Solar Ii User Manual
Sinclair Smf C09ai User Manual
Telefunken Telefunk T104 User Manual
Universal Power Group 12v 2a User Manual