Sharp Lc0760 User Manual

99.97% HEPA air c le ane rs  
MODEL LC0760/LC1060/LC1460  
Read instructions before operating. Retain for future reference.  
Instruction Leaflet  
IN FO-LIN E  
¤
If after having read this leaflet, you have any  
questions or com m ents on your air cleaner,  
call 1-8 0 0 -2 5 3 -2 7 6 4 in North Am erica.  
14. Keep unit away from heated surfaces and open flames.  
15. DO NOT attempt to repair or adjust any electrical or  
mechanical functions on this unit. Doing so will void your  
warranty. The inside of the unit contains no user serviceable  
parts. All servicing should be performed by qualified  
personnel only.  
PLEASE SAVE THESE  
INSTRUCTIONS.  
CONSUMER SAFETY INFORMATION  
WARNING: To reduce the risk of fire or electric shock,  
DO NOT use this air cleaner with any solid-state speed  
control device.  
THIS PRODUCT IS EQUIPPED WITH A POLARIZED AC  
(Alternating Current) PLUG (a plug having one blade wider than  
the other). This plug will fit into the power outlet only one way. If  
the plug does not fit fully into the outlet, reverse the plug. If it  
still does not fit, contact qualified  
personnel to install the proper outlet.  
DO NOT DEFEAT THE SAFETY  
PURPOSE OF THIS POLARIZED  
PLUG IN ANY WAY.  
The length of cord used on this  
appliance was selected to reduce the hazards of becoming tan-  
gled in, or tripping over a longer cord. If a longer cord is neces-  
sary an approved extension cord may be used. The electrical  
rating of the extension cord must be equal to or greater than  
the rating of the air cleaner. Care must be taken to arrange the  
extension cord so that it will not drape over the countertop or  
tabletop where it can be pulled on by children or accidentally  
tripped over.  
CONGRATULATIONS!  
By choosing a Bionaire® Air Cleaner you have acquired a lifetime  
of fresher air.  
Your Bionaire® Air Cleaner represents the culmination of years  
of research and development into the problems of cleaning  
air in home or office environments. It is a top-quality, affordable  
machine offering a unique filtration process that represents a  
breakthrough in the application of modern technology.  
3
HOW YOUR HEPA AIR CLEANER WORKS  
Dirty, dust-laden air is drawn through the Air Intake Grill of the  
unit where it first passes through the HEPA filter cartridge.  
The HEPA media removes virtually all airborne particles passing  
through it.  
®
Additionally, the filter is treated with Microban antimicrobial  
protection. This protects the filter by inhibiting the growth of  
odor-causing bacteria and mold on the filter surface.  
The air then passes through an activated carbon filter, which  
helps to remove odors.  
Finally the outlet air stream has a negative ion emitter which  
further enhances the cleaning of the air through the electrostatic  
precipitation of small airborne particles.  
Clean air is not a luxury – It is a necessity!  
FEATURES AND CONTROLS  
1. Air Intake Grill – Air is drawn into the front/top  
(depending on unit orientation) of the air cleaner.  
2. Air Exit Grill – After the air has been cleaned, it is  
dispersed into the surroundings through the outlet grill.  
3. Negative Ion Source – A feature of the air cleaner is the  
incorporation of a negative ion generator. Negative ions help  
clean the air by electrostatic precipitation of small airborne  
Fig 1  
Air Exit Grill  
Function Switch  
Negative ion Source  
Fan Control  
Filter Check Light  
Air Intake Grill  
Filter Condition Monitor  
particles. If the unit is close to a wall and/or in a very polluted  
area, some deposition of particles on objects surrounding  
the Air Cleaner will occur and may accelerate the natural  
darkening of the immediate environment. To avoid  
discoloration of walls, move unit away from wall  
or operate ionizer only as needed.  
4. Function Switch – The units mode of operation is controlled  
by a simple rotary switch. The user can select the unit to  
have fan operation with or without ions being emitted.  
This switch also turns the unit “off”.  
4
5. Indicator Lights – Indicator lights tell the user when the unit  
is on, (“Power” symbol), and when the unit's mode is set to  
have ions emitted, (“Ions” symbol).  
6. Filter Condition Monitor – When the ball, at high speed  
setting, reaches the high end of the indicator scale, the filter  
cartridge is loaded with particulate pollutants and needs  
changing (LC0760 & LC1060).  
7. Fan Control – The air-cleaning rate of the unit can be  
controlled for maximum efficiency and convenience. The  
two speed fan control is used to select the operating speed  
of the fan. The unit is designed to run continuously at the  
low speed setting. For extended motor life, it is recommend-  
ed that the high speed setting be used only when necessary.  
8. Filter Check Light (LC1460) – An electric switch senses the  
condition of the filter cartridge and turns on an indicator light  
if the filter cartridge needs to be changed.  
PRE-OPERATING INSTRUCTIONS  
1. When removing the unit from the packing case, visually  
check for shipping damage. Please contact both the shipper  
and your dealer immediately if the unit bears any sign of  
damage from mishandling. All Bionaire® units are carefully  
inspected before leaving our factory.  
2. KEEP SHIPPING CARTON AND PACKING for use in the  
unlikely event that your Bionaire® unit needs servicing. If this  
unit is shipped without the original packing, damage could  
occur and void the warranty.  
3. PLEASE REFER TO THE FOLLOWING PROCEDURE  
BEFORE OPERATING YOUR NEW Bionaire® Air Cleaner.  
WARNING: Check the operating voltage shown on  
the back of the unit. Do not operate at voltages other  
than shown.  
OPERATING INSTRUCTIONS  
1. Remove the inlet grill, remove the HEPA filter cartridge and  
the carbon filter and remove any plastic wrapping or panels  
from them. Re-install the filters as per the section “Filter  
Replacement”.  
2. After re-installing the filters, choose a suitable location,  
table top, shelf or wall (see wall-mount instructions)  
ensuring that both the air intake and exit are not obstructed.  
The air cleaner can be placed as a vertical “tall” unit, or  
5
as a horizontal “low profile” unit, depending on your  
personal preference.  
3. Plug the power cord into a wall outlet.  
4. Set the unit to the desired mode of operation, “Fan/On”  
or “Fan/Ions”.  
5. Select the desired fan speed (LC1060 & LC1460 “Low,”  
“Med” or “High”) (LC0760 “Low” or “High”).  
Low Airflow - For continuous, extra quiet filtration.  
Medium Airflow - For continuous filtration.  
High Airflow - For maximum, transient pollution filtration.  
NOTE: Maximum filtration efficiency may not be reached  
until after the first 48 hours of operation.  
CLEANING INSTRUCTIONS  
Be sure the unit is switched off and unplugged from the power  
outlet.  
PLASTIC HOUSING - A soft cloth and non-abrasive cleaner  
may be used to remove any excessive dirt or fingerprints.  
Treated like any other quality appliance, your Bionaire® unit  
will retain its attractive appearance for many years.  
ION EMITTER PINS - FIRST, TURN OFF AND UNPLUG THE  
UNIT. Reach into the air exit grill with a cotton swab dipped into  
alcohol to clean any dirt that may have accumulated on the pins.  
Use caution when cleaning pins.  
WARNING: Do not wash the HEPA filter cartridge or the  
carbon filter. These are disposable items.  
FILTER REPLACEMENT  
To keep your unit operating at peak efficiency, the HEPA filter  
cartridge should be replaced as needed or as indicated by the  
Filter Condition Monitor (figure 2, LC0760 & LC1060). The HEPA  
filter cartridge is designed with large media surface areas and  
may last up to one year in typical operation. The rate at which  
the filter clogs with particulates depends on the volume and  
quality of air being filtered. If the unit is used continuously on  
high in a room with a strong source of particulates, such as a  
work shop, then the effective life of the filter will be reduced. In a  
cleaner environment, operating mainly on lower speeds, the filter  
will last longer. The carbon filter should be replaced regularly,  
about every three months or when odor removal effectiveness  
is noticeably reduced.  
6
Filter Condition Evaluation  
To test the condition of the filter cartridge, turn the unit on high  
speed and observe the output airflow of the unit. When the filter  
cartridge becomes clogged with particles there will be a notice-  
able drop in air flow and the air output will no longer be steady.  
Additionally, the indicator ball will be hovering in the upper region  
of the flow meter (figure 2, LC0760 & LC1060).  
Fig 2  
Replacing the Carbon Filter  
1. Unplug the unit. Place unit on its back.  
2. Press on the two side catches to release the front  
inlet grill (figure 3).  
3. Carefully remove the HEPA filter cartridge (figure 4).  
4. Remove and discard the carbon filter located in  
Indicator Ball  
the base of the unit (figure 4).  
5. Remove any protective wrap from the  
Fig 3  
replacement carbon filter and place it in the  
base of the unit (figure 5).  
6. Mark the new installation date on the side  
of the HEPA filter cartridge. Insert it in the unit  
with the foam tape of the filter pressing  
against the carbon filter (figure 5).  
7. Install the inlet grill (figure 6).  
Side Catches  
Replacing the HEPA Filter Cartridge  
1. Repeat steps 1-5 of carbon filter replacement.  
2. Remove any protective wrapping or panels from the new  
HEPA filter cartridge, mark the new installation date on the  
side panel of the HEPA Cartridge and place foam side first in  
the unit (figure 5).  
3. Install the inlet grill (figure 6).  
7
Fig 4  
Fig 6  
Fig 5  
THE ADDITIONAL BENEFIT OF NEGATIVE IONIZATION.  
This Bionaire® model is a compact air cleaner offering the  
benefits of negative ionization. Behind the outlet grill you will  
notice two sharp pins pointing into the airstream. This is the  
ionization source.  
Responding to the challenge of improving the quality of indoor  
air, Bionaire® introduced compact air cleaners to combine  
the revolutionary HEPA filter system along with ion generators  
producing millions of negative ions.  
In order to maintain the ion output, the emitter pins should  
be cleaned, as per the “Cleaning Instructions”, when an  
accumulation of dust is noticed on the tips of the pins.  
After extended use, dust may collect around the outlet panel.  
This is due to the electrostatic precipitation process initiated  
by the negative ions emerging from the unit. This dust does  
not originate from the discharged air but is drawn out of the  
uncleaned air going past the air outlet. It is additional evidence  
of the air-cleaning effectiveness of negative ions. The dust is  
easily removed by wiping the panel with a soft cloth.  
WALL-MOUNTING  
There are two keyhole slots on the back which allow  
the unit to hang on two suitable screws inserted into a wall.  
Select #8 Pan Head screws that are approximately  
1" - 1 1/4" long that can be inserted into and retained by the  
keyhole slots. Verify their suitability before fixing them in the wall  
by sliding them into the keyhole slots.  
Carefully mark the two hole locations horizontally on the  
wall (distance between holes should be; 4.5 inches (11.4 cm).  
Make sure that the screws are of correct length to give reliable  
support. The use of wall plugs or expansion devices will be  
needed for plaster board walls.  
Drive screws into the wall leaving a gap of 3/8 inch (9.5 mm)  
between the wall and the underside of the screw head.  
Hold the air cleaner against the wall, insert the screw heads  
into the keyhole slots, carefully lower the unit to fully engage the  
8
screw heads into the slots. Adjust height of the screw head as  
required to suit the wall’s contours.  
AIR CLEANER TROUBLESHOOTING GUIDE  
Solution  
Problem  
¤ Make sure the electrical outlet or circuit breaker is  
working.  
¤ Unit will not operate.  
¤¤Check that the unit is plugged in.  
¤¤Check that front inlet grill is securely in place.  
¤¤If unit continues to not operate call 1-800-253-2764  
for assistance.  
¤ If the Filter Condition Light is on, or the Indicator Ball  
is hovering in the upper region of the filter monitor, it is  
indicating low performance and the filter needs to be  
replaced. For replacement filters call 1-800-253-2764  
¤ Decreased airflow.  
¤¤Make sure inlet and outlet are not blocked.  
¤¤Check carbon filter.  
¤ Because on negative ions emerging from the unit,  
dust may collect. To remove wipe panel or wall with soft  
cloth. Move unit further from wall.  
¤ Dust on front grills or wall.  
SERVICE INSTRUCTIONS  
Do NOT attempt to repair or adjust any electrical or mechanical  
functions on this unit. Doing so will void the warranty. The inside  
of the unit contains no user serviceable parts. All servicing  
should be performed by qualified personnel only.  
If you need to exchange the unit, please return it in its original  
carton, with a sales receipt, to the store where you purchased  
it. If you are returning the unit more than 30 days after the date  
of purchase, please see the enclosed warranty.  
Should your air cleaner require service, please consult the  
enclosed lists of authorized service centers for the one closest  
to you, or please call 1-800-253-2764 in North America for  
further assistance.  
4.  
If you have any other questions or comments,  
feel free to write to us:  
PO Box 400  
Milford, MA 01757  
USA  
Canada  
6385 Shawson Drive  
Mississauga, Ontario  
Canada, L5T IS7  
9
FILTER REPLACEMENT NUMBERS  
#LC-0760  
#LC-1060  
#LC-1460  
Filter Cartridge:  
Order No:  
One HEPA filter cartridge.  
#A0701H #A1001H  
#A1401H  
Carbon filter:  
Order No:  
Four activated carbon filters.  
#A0702C #A1002C #A1402C  
TWO (2) YEAR LIMITED WARRANTY  
Bionaire® warrants for TWO (2) YEARS from the date of original pur-  
chase, to repair or, if repairs are not commercially applicable to replace  
without charge (parts and labor), any supplied or manufactured part  
of this air cleaner which, upon inspection by an authorized service  
center, proves to have failed in normal use due to defects in mate-  
rial or workmanship, or, at its option, to replace the unit. If the  
product can not be reasonably repaired the consumer may elect a  
free replacement or refund.  
Operations under conditions other than those recommended or at  
voltages other than the voltage indicated on the unit, or any  
attempts by unauthorized personnel to service the unit or modify it,  
will render the guarantee void.  
Bionaire® shall not be liable for any personal injury, property dam-  
age or any incidental or consequential damages of any kind (includ-  
ing water damage), resulting from defects, malfunctions, misuse,  
improper installation or alteration of the product.  
BIONAIRE® EXPRESSLY DISCLAIMS ALL RESPONSIBILITY  
FOR CONSEQUENTIAL DAMAGES OR INCIDENTAL LOSSES  
FOR BREACH OF EXPRESS OR IMPLIED WARRANTIES  
CAUSED BY USE OF THIS PRODUCT. SOME STATES DO  
NOT ALLOW THE EXCLUSION OR LIMITATION OF INCE-  
DENTAL OR CONSEQUENTIAL DAMAGE.  
The provisions of this warranty are in addition to, and not a modification  
of, or subtraction from the statutory warranties and other rights and  
remedies contained in any applicable legislation and to the extent  
that any such provision purports to disclaim, exclude or limit any  
such statutory warranties or other rights or remedies, such  
provisions shall be deemed to be amended to the extent  
necessary to comply therewith.  
For Warranty Service, please call 1-800-253-2764 in North America.  
A Bionaire® consumer service representative will help determine  
which is the best procedure in order for your air cleaner to be  
repaired.  
KEEP THIS NUMBER FOR FUTURE REFERENCE.  
10  
428-867  

Mitsubishi Electronics Mr Slim Mcf D18vd User Manual
Panasonic Cu Ce7gke User Manual
Panasonic Cw Xc54hu User Manual
Panasonic Cw Xc103vu User Manual
Remote Technologies Bdsv3 User Manual
Sanyo Ecoi C1305dzh8 User Manual
Schumacher Sf 200 30 User Manual
Soleus Air Air Conditioner Hgw 308r W User Manual
Whirlpool Ace082xs0 User Manual
Whirlpool Acm 152xe0 User Manual