Operations Guide
Océ
1.1.1.
English version
Océ OP1030/1040/1050
Network Fax
Operations Guide
Included Utilities
The following utilities are contained on the provided CD-ROM. In order to use the related Network FAX functions, it is
necessary to follow the appropriate procedure and install the corresponding utility on your computer.
Network FAX Driver
This software allows you to send documents created on your computer to the Printer/Scanner Kit* in this machine, which
converts them to the appropriate format, transfers them to Fax Kit which then transmits them to the other fax machine.The
Network FAX Driver must be installed on the computer from which you want to send the documents.
Address Book for Network FAX
This utility is the address book that needs to be installed on the computer from which you want to send documents. The
Address Book for Network FAX allows you to create and use your own personal fax destination list for sending documents
directly from your computer. It is also possible to import and use CSV-formatted address data that has been created with
other software.
Scanner File Utility
Documents sent from the other fax machine can be received by the Fax Kit in this machine and, once the Printer/Scanner
Kit* is installed, the received documents will be converted to an image file and can be sent to and saved in a folder that is
designated in the Scanner File Utility. Because the Scanner File Utility must be running in order to receive the incoming
data, it is recommended that you install it on a computer that is generally up and running on the network (referred to as the
“Server Computer” in this manual).
* In the case of the KM-C850, this is a Scanner Kit.
ii
Outline of the Network FAX Functions
The Network FAX functions allow you to send and receive fax documents between computers on your LAN network and the
other fax machines.In addition, if you use the Address Book, you can register individual destinations, or multiple destinations
as an individual group, in advance.
G Transmission function
1. Documents are sent as image data from a network computer over the LAN network to this fax machine.
2.Those documents are sent over the telephone line as a
fax transmission from this fax machine to the other fax
machine.
G Reception function
1. Documents are sent over the telephone line as a fax transmission from the other fax machine to this fax machine where
they are converted into PDF or TIFF file data.
2. That data is sent from this fax machine over the LAN network to the Server Computer.
3. The file is saved on the Server Computer.
iii
Outline of the Network FAX Functions
G Address Book
1. Information for individual destinations (or a group of destinations) is registered in the Address Book software on the
computer from which you want to send documents.
2. The destination for sending documents using the Network FAX function is selected from this Address Book.
3. The documents are then sent as image data from a network computer over the LAN network to this fax machine.
4. Those documents are sent over the telephone line as a fax transmission from this fax machine to the other fax machine
based on the selected destination information. If multiple destinations are registered as a group, the documents will be
broadcast to all of those destinations.
iv
Contents
About this On-Line Manual................................................................................... i
Trademark Information ......................................................................................... i
Operating Environment ........................................................................................ i
Included Utilities .................................................................................................. ii
Outline of the Network FAX Functions ............................................................... iii
Section 1 Installing the Corresponding Software .. Page 1-1
G Registering the Machine’s IP address................................................................................... 1-2
G Uninstalling the Network FAX Driver ..................................................................................... 1-4
1-3 Installing the Scanner File Utility ..................................................... Page 1-6
Section 2 Sending a Fax ........................................... Page 2-1
(1) Delayed Transmission ......................................................................................................... 2-1
(2) F-Code Based Communication ........................................................................................... 2-2
(3) Concurrent Print .................................................................................................................. 2-2
(4) Save Transmitted Original ................................................................................................... 2-2
(5) Attaching a Cover Page....................................................................................................... 2-3
(6) Restricted Access ................................................................................................................ 2-3
2-2 Basic Transmission ......................................................................... Page 2-4
2-3 Fax Setting Tab ............................................................................... Page 2-6
2-4 Default Setting Dialogue Box .......................................................... Page 2-7
(1) Sending Options Tab ........................................................................................................... 2-7
(2) Sender Information Tab ....................................................................................................... 2-9
(3) Machine Setting Tab .......................................................................................................... 2-10
(4) Restricted access Tab ....................................................................................................... 2-11
2-5 Various Settings in the TX Setting Dialogue Box .......................... Page 2-12
(1) Selecting a Destination from the Address Book ................................................................ 2-12
(2) F-Code Based Communication ......................................................................................... 2-15
(3) Registering the Destination Information to be Added to the Cover Page .......................... 2-16
(4) Optional Settings ............................................................................................................... 2-18
(5) Transmitting Terminal Information Data ............................................................................. 2-19
(6) Machine Settings ............................................................................................................... 2-20
2-6 Transmission Control .................................................................... Page 2-21
v
Contents
Section 3 Receiving a Fax ........................................ Page 3-1
3-1 Summary of Delivery Settings......................................................... Page 3-2
3-2 Starting the Scanner File Utility....................................................... Page 3-4
3-3 Setup Dialogue Box ........................................................................ Page 3-5
3-4 Folder Setting Dialogue Box ........................................................... Page 3-6
3-5 Delivery Setting List Dialogue Box .................................................. Page 3-7
3-6 Delivery Setting Dialogue Box....................................................... Page 3-10
3-7 Determining the Destination Folder .............................................. Page 3-13
3-8 When a notice of fax reception is sent .......................................... Page 3-13
3-9 Checking a Reception Notification Error ....................................... Page 3-14
3-10 Opening Received Faxes............................................................ Page 3-15
3-11 Deleting Received Faxes ............................................................ Page 3-16
Section 4 The Address Book .................................... Page 4-1
4-1 Registering Destination Information ................................................ Page 4-2
4-2 Registering Multiple Destinations as a Group ................................. Page 4-4
4-3 Address/Group Copy....................................................................... Page 4-6
4-4 Editing Individual and Group Destination Information ..................... Page 4-7
(1) Editing Information for an Individual or Group Destination .................................................. 4-7
(2) Editing Information for More than One Individual or Group Destinations ............................ 4-8
(3) Search/Replace the Contents of a Particular Entry Item .................................................... 4-9
4-5 Deleting Individual and Group Destination Information................. Page 4-10
4-6 Importing Address Data................................................................. Page 4-10
(1) Importing FDT Files ........................................................................................................... 4-10
(2) Importing CSV Files........................................................................................................... 4-11
4-7 Exporting Address Data ................................................................ Page 4-13
Section 5 Specifications ........................................... Page 5-1
vi
Section 1
Installing the Corresponding Software
1-1 Installing the Network FAX Driver
1. Insert the provided CD-ROM into the CD-ROM drive of the computer in which you want to install the Network FAX Driver.
The set-up screen will appear automatically.
* If the set-up screen does not appear, start the appropriate software manually from the CD-ROM.
2. Read the conditions of use and then click the P button.
3. Click on Network FAX Drivers in the main menu.
4. Click once again on Network FAX Drivers.
5. Follow the instructions in the installation wizard to continue the installation procedure.
Page 1-1
1-1 Installing the Network FAX Driver
G Registering the Machine’s IP address
Once you have installed the Network FAX Driver, perform the following procedure to register the IP address of the
machine that you want to use as the Network FAX.
* The following procedure is explained as though it is being carried out in Windows XP. If you are using another
operating System, use this procedure simply as reference.
1. Click on Start in the Task Bar and then select Control Panel, Printer and other Hardware and then Printers and
Faxes in that order from the successive menus in order to access the Printers and Faxes dialogue box.
(This screen-shot is for when the KM-5035 is installed.)
2. Right-click on the name of the machine that you want to use as the Network FAX and select Printing Preferences... from
the resulting dropdown menu. The Printing Preferences dialogue box will appear.
* To open the Properties dialogue box under Windows 98 and so on, click on Start in the Windows Task Bar and then
select Settings and Printers. Right-click on the name of machine that you want to use as the Network FAX and select
Properties from the dropdown menu. Click on the FAX Setting tab in order to display its contents.
(This screen-shot is for when the KM-5035 is installed.)
Page 1-2
1-1 Installing the Network FAX Driver
3. Click on the FAX TX Setting... button in order to access the Default Setting dialogue box.
4. Click on the Machine Setting tab in order to display its contents.
5. In the Network FAX Address area, enter the IP address, or host name, of the machine that you want to use as the
Network FAX.
NOTE: The IP address/host name that you enter here must be the same as that registered in the scanner default settings
of the machine itself. (Refer to "2. Set-up" in the Operation Guide for your Network Scanner.)
Sample screen-shot of the
scanner default setting window
6. Click on the OK button.
Page 1-3
1-1 Installing the Network FAX Driver
G Uninstalling the Network FAX Driver
Perform the following procedure when you want to delete the Network FAX Driver from your computer.
1. Click on Start in the Task Bar and then select Control Panel, Printers and Other Hardware and then Printers and
Faxes in that order from the successive menus in order to access the Printers and Faxes dialogue box.
2. Right-click on the name for this printer (normally: Kyocera Mita KM-XXXX NW-FAX), and then select Delete in the
resulting menu.
3. Click on Yes when the confirmation dialogue box appears and the driver will be deleted.
Page 1-4
1-2 Installing the Address Book for Network FAX
1. Insert the provided CD-ROM into the CD-ROM drive of the computer in which you want to install the Address Book for
Network FAX. The set-up screen will appear automatically.
* If the set-up screen does not appear, start the appropriate software manually from the CD-ROM.
2. Accept the conditions of use and then click the P button.
3. Click on Network FAX Drivers in the main menu.
4. Click on Address Book for Network FAX.
5. Follow the instructions in the installation wizard to continue the installation procedure.
Page 1-5
1-3 Installing the Scanner File Utility
1. Insert the provided CD-ROM into the CD-ROM drive of the computer in which you want to install the Scanner File Utility.
The set-up screen will appear automatically.
* If the set-up screen does not appear, start the appropriate software manually from the CD-ROM.
2. Accept the conditions of use and then click the P button.
3. Click on Network FAX Utilities in the main menu.
4. Click on Scanner File Utility.
5. Follow the instructions in the installation wizard to continue the installation procedure.
* If the Select Components screen appears, click on the box next to KM-Network FAX Receive Handler in order to put
a check mark in that box. The content of the other checkboxes is as follows:
• KM-DB Link Handler ... The KM-DB Assist option (Adds file information as keywords to scanned image data files)
• DataBase Link Handler (Sample) ... The Database Assist option (Creates a csv file that includes the registered file
information to go with the scanned image data file)
Page 1-6
Section 2 Sending a Fax
This section contains explanations on how to use the Network FAX Driver to send documents created on a network computer
directly from that computer to the other fax machine.
IMPORTANT!
The Network FAX Driver must be installed on the computer from which you want to send the documents. Refer to “1-1
2-1 Main Transmission Functions
(1) Delayed Transmission <see page 2-7 for setting procedures>
This function enables you to have documents transmitted at a designated time. Delayed transmission can be carried out at
any time within 24 hours from the time that is actually set in the fax itself.
Page 2-1
2-1 Main Transmission Functions
(2) F-Code Based Communication <see page 2-15 for setting procedures>
This function enables you to send documents to an F-Code Box that is registered in a destination fax machine. Because
F-Code Boxes include a sub-address and password, highly confidential communication is ensured. It will be necessary
for you to enter the corresponding sub-address and password of the destination F-Code Box (if they have been
designated for that box) whenever you perform an F-Code Based Transmission procedure.
* For more information on F-Code based
communication, refer to the following:
• KM-3035/4035/5035/C850: "Section 5
Other Features of this Fax"
in the Fax Edition of that
Operation Guide
• KM-2530/3530/4030:
"Section 4 Other Features
of this Fax" in the Fax
Edition of the
Memory
of the other Fax Machine
corresponding Operation
Guide
(3) Concurrent print <see page 2-7 for setting procedures>
This function enables you to print out the documents at the same time as you send them by fax.
(4) Save Transmitted Original <see page 2-7 for setting procedures>
This function enables you to save transmitted documents in the folder that corresponds to the folder number which was
registered under the “Network FAX Registration” settings in the fax machine . Those documents will be saved as a PDF or
TIFF file according to the default “File Type Setting” in the fax
machine itself.
* For more information on registering folder numbers
and on file formats, refer to the following:
• KM-3035/4035/5035/C850: "Section 9
Network FAX Settings (Option)" in the
Fax Edition of that Operation Guide
• KM-2530/3530/4030: "Section 8
Network FAX Settings (Option)" in the
Fax Edition of the corresponding
Operation Guide
Page 2-2
2-1 Main Transmission Functions
(5) Attaching a Cover Page <see page 2-7 for setting procedures>
This function enables you to add a cover page to your transmission that includes suchTTI (TransmittingTerminal Information)
data as your company name, department name, your own name, your telephone or fax number, in addition to whatever
comment you’d like to send. The type of cover page you use can be selected from among several different templates.
(6) Restricted Access <see page 2-11 for setting procedures>
When Restricted Access is turned ON
in the copy (or fax) machine itself, this
function enables you to control Network
FAX Transmissions under Restricted
Access as well, only allowing
transmission when a viable access
code that is registered in the copy (or
fax) machine is entered.
* For more information on Restricted
Access, refer to the following:
• KM-3035/4035/5035/C850: "Section
7 COPIER MANAGEMENT" in the
Copier Edition of that Operation Guide
• KM-2530/3530/4030: "Section 4 Other Features of this Fax" in the Fax Edition of the corresponding Operation Guide
Page 2-3
2-2 Basic Transmission
1. Use an application on your computer to create the documents that you want to send.
2. Select Print from the File menu.
3. Use the dropdown menu in the Name field to select the name of the machine that you want to use as the Network FAX.
The print dialogue box for the application that you are using will appear.
NOTE: The following screen shot is just an example and the actual dialogue box displayed on your computer may differ
depending to the application that you are using.
(This screen-shot is for when the KM-5035 is installed.)
4. Enter the number of copies and page numbers that you want to fax.
NOTE: Make sure that the number of copies is set to “1”. If this is set to more than one, more than one set of copies (the
actual number you enter) will be transmitted.
5. Click on the Properties button in order to access the Properties window.
(This screen-shot is for when the KM-5035 is installed.)
Page 2-4
2-2 Basic Transmission
6. Perform all of the desired settings under the FAX Setting tab, such as the original size setting, and then click on the OK
button.
* Refer to “2-3 FAX Setting Tab” on page 2-6 for more detailed information on the settings in that tab.
7.The print dialogue box for the application that you are using will be displayed once again. Click on the OK button.The TX
Setting dialogue box will appear.
* Refer to “2-5 Various Settings in the TX Setting Dialogue Box” on page 2-12 for more detailed information on the
settings in that dialogue box.
8. Use the keyboard to enter the phone number of the destination fax in the FAX Number field. If you want to use the
Address Book to enter this information, refer to “(1) Selecting a Destination from the Address Book” on page 2-12.
• Maximum number of characters that can be entered: 32
• Characters that can be entered: 0 – 9, #, *, -, and a space (a hyphen or space can NOT be entered as the first character)
9. If you are using a cover page, refer to "(3) Registering the Destination Information to be Added to the Cover Page" on
page 2-16.
10. Click on the Add to Destination List button.The entered destination information will be displayed under the Destination
List area.
If you want to send the same documents to more than one destination, repeat steps 8 and 9 as required. (Up to 80
destinations can be registered.)
* If you want to delete a destination from the Destination List area, select that destination and then click on the Delete
from list button. If you want to delete all of the currently registered destinations, click on the Delete All button.
11. Click on the Send button to initiate the fax transmission operation.
Page 2-5
2-3 FAX Setting Tab
Use the contents of this tab to set certain transmission conditions, such as the size of the original being sent.
1
2
3
4
1 Original Size field
Use the dropdown menu in this field to select the size of the original being transmitted.
* The size of the documents created in the application will be changed to the size selected here for transmission
purposes.
Available settings: Letter, Legal, Ledger, Statement, A3, A4, A5, Folio, B4 and B5
2 Orientation radio buttons
Make sure the radio button for the desired orientation, either Portrait or Landscape, is selected.
3 Original Image Quality field
Use the dropdown menu in this field to select the resolution quality of the original being transmitted.
Available settings: Normal, Fine, Ultra fine
* When you need to send documents that contain minute text and detailed lines at the best possible quality, select
the Ultra fine setting.The Ultra fine setting will only be available when there is a check mark in the FAX Extended
Memory check box.
* In order to actually send documents at the Ultra fine setting, it is necessary to add additional memory to your fax
machine. (Refer to the Operation Guide for your fax machine.)
4 FAX TX Setting button
Click this button in order to access the Default Setting dialogue box if you want to change the default settings for
fax transmission.
* Refer to “2-4 Default Setting Dialogue Box” on page 2-7 for more detailed information on the settings in that
dialogue box.
Page 2-6
2-4 Default Setting Dialogue Box
By setting the transmission conditions that you use most in this dialogue box, you can minimize the need to change the
settings each time.
* The Default Setting dialogue box can be accessed using the following procedure:
Click on Start in the Windows Task Bar and then select Control Panel, Printer and other Hardware and then Printers
and Faxes in that order from the successive menus in order to access the Printers and Faxes dialogue box.
Then, right-click on the name of the machine that you want to use as the network fax and select Printing Preferences
from the resulting dropdown menu. Click on the FaxTX Settings button in the Printing Preferences window. (With systems
such as Windows 98 and Windows Me, click on Start in the Task Bar and then selecting Settings and then Printers in that
order from the successive menus in order to access the Printers dialogue box. Right-click on the name of the machine that
you want to use as the network fax and select Properties from the resulting dropdown menu. Then, click on the Fax TX
Settings button in the Properties window.)
(1) Sending Options Tab
1
2
3
4
1 Delayed TX checkbox
Put a check mark in this checkbox in order to make the time fields to the right of the checkbox active whenever you want
to set the time that your documents will be transmitted.The desired time setting can be entered directly with the keyboard
or by clicking on the L and M arrows. Enter the time on a 24-hour time basis (00:00 - 23:59).
NOTE: If you designate a time that is earlier in the day than the time that is actually displayed in the fax machine itself, the
transmission operation will be carried out the following day at that time. Be sure to check the time setting in the fax
machine itself before making this setting.
2 Concurrent print checkbox
Put a check mark in this checkbox when you want to print out the documents at the fax machine same time as you send
them by fax.
3 Save TX Original checkbox
Put a check mark in this checkbox when you want to save documents in the computer that was registered under the
“Network FAX Registration” settings in the fax machine.
* For more information on saving the data for transmitted fax documents, refer to the following:
• KM-3035/4035/5035/C850: “Section 9 Network FAX Settings (Option)” in the Fax Edition of that Operation Guide
• KM-2530/3530/4030: “Section 8 Network FAX Settings (Option)” in the Fax Edition of the corresponding Operation
Guide
* For the procedure to save the data for transmitted fax documents, refer to
4 Attach Cover Page checkbox
Put a check mark in this checkbox when you want to add a cover page to your transmission.
Page 2-7
2-4 Default Setting Dialogue Box
Perform the following procedure to select the settings for the cover page.
1) Select the desired template for the cover page from the Template of Cover Page dropdown menu.
2) To check the format of the template, click on the Preview button.
The format for the currently selected template will be displayed.
To change the type of template, use the dropdown menu or click on the O or P on the upper portion of the dialogue box.
The display ratio for the template can also be changed to between 25% and 250% using the dropdown menu. If some
destinations have been registered, the format for each destination can be displayed. Click on the O or P next to the
“Recipient” to change the format. (Refer to “(3) Registering the Destination Information to be Added to the Cover Page”
on page 2-16 for more information on registering destinations.) After you are finished previewing the format, click on the
Close button.
3) To add your message to the cover page, click on the Edit Message button.
The Edit Message dialogue box will be displayed.
Enter the message to be displayed on the cover page and click on the OK button. The message can be up to 1000
characters long.
Page 2-8
2-4 Default Setting Dialogue Box
(2) Sender Information Tab
1
2
3
4
5
6
Enter your own information into fields 1 – 5 explained below when you want to send a cover page with your faxes.
1 Company Name: Your company name can be up to 64 characters long.
2 Department Name: Your department name can be up to 64 characters long.
3 Name (user name, etc.): Your name can be up to 16 characters long.
4 Telephone Number: Your telephone number can be up to 20 characters long. [Available characters: 0 - 9, #, *, -, (, ),
&, +, and a blank space]
5 FAX Number:Your fax number can be up to 20 characters long. [Available characters: 0 - 9, #, *, -, (, ), &, +, and a blank
space]
6 E-Mail Address: Your e-mail address can be up to 64 characters long.
[Available characters: Symbols ( !, #, $, %, &, ’, *, +, -, ., /, =, @, [, ], ˆ, _, ‘, {, } )
Alphanumerics (0 – 9, A – Z and a – z)]
* If you register your e-mail address, you will be able to select to have a Network FAX Transmission Report sent to you
as an e-mail attachment.
NOTE: In order to have the Network FAX Transmission Report sent to you by e-mail, it is necessary to turn ON the
corresponding report printout setting (or have it set to “Output on condition”) in the fax default settings and
register the administration's e-mail address in the network fax registration, and carry out the “SMTP” setting in
the scanner default settings.
* It is possible to register the administration's e-mail address in the scanner default settings instead of registering
it in the network fax registration.
Page 2-9
2-4 Default Setting Dialogue Box
(3) Machine Setting Tab
When you want to use a different machine as a fax, use this tab to change the IP address, or the host name, to the
information that is registered in scanner default settings of the desired machine. (Refer to “2. Set-up” in the Operation Guide
for your Network Scanner.)
Sample screen-shot of the
scanner default setting window
If you use the host name, your computer must be under a network environment
controlled by a WINS server or a DNS server.
The host name can be up to 32 one-byte characters in length and made up of any of the
following characters: 0 – 9, A – Z, a – z, - (hyphen/dash) and . (period/dot)
Page 2-10
2-4 Default Setting Dialogue Box
(4) Restricted access Tab
When Restricted Access is turned ON in the copy (or fax) machine itself, transmission will only be allowed when a viable
access code is entered.
If your access code has not been registered under this tab, Non-registration will be displayed in the Department code
field, and Registration completion will be displayed in that field if it has been registered.
* In order to use the Restricted Access function, it is necessary to turn Restricted Access ON in the fax machine itself. For
more information on access codes, refer to the following.
• KM-3035/4035/5035/C850: “Section 7 COPIER MANAGEMENT” in the Copier Edition of that Operation Guide and
“Section 5 Other Features of this Fax” in the Fax Edition of the Operation Guide
• KM-2530/3530/4030: “Section 4 Other Features of this Fax” in the Fax Edition of the corresponding Operation Guide
G Registering your access code
1. If you have not registered your access code under the Restricted access tab, click on the Registration button in order
to access the Department Code Registration dialogue box.
2. Enter your access code (1-8digits) and then click on the OK button. The Restricted access tab will be displayed once
again.
G Deleting your access code
1.Click on the Reset button.The registered access code will be deleted from the Restricted access tab and Non-registration
will be displayed once again in the Department code field.
Page 2-11
2-5 Various Settings in the TX Setting Dialogue Box
(1) Selecting a Destination from the Address Book
NOTE
In order to use the Address Book, it is necessary to install it and register the corresponding destinations in advance. Refer
to “4-1 Registering Destination Information” on page 4-2 for more detailed information on destination registration procedures.
1. Click on the Select from Address Book button in order to access the Select Address dialogue box.
Page 2-12
2-5 Various Settings in the TX Setting Dialogue Box
2. The registered destinations will be displayed in the list in the upper portion of the dialogue box.
If you want to search for a particular destination, perform procedures 1) and 2) below. If you do NOT need to search for
a destination, go directly to step 3.
1) Make sure that the desired Search target radio button, either Registration Name or Company Name, is selected.
2) Enter the text to be searched for in the Search Item field. The text can be up to 64 characters long.
The search operation will begin as soon as the first character is entered. Only those entries that start with exactly the
same character(s) as the search criteria will be displayed in the list. If there are no entries that match the search criteria
in this way, nothing will be displayed in the list.
* To display all of the entries registered in the Address Book once again, click on the Display all button.
3.To add a destination from the list of destinations in the Address Book (upper list) to the Destination List (lower list), click
on the desired destination to select it and then click on the Add to Destination List button.
* When you select an entry which multiple destinations have been registered as a group, the Detail button appears on
the top of the dialogue box.
* If you select an entry registered as a group and click on the Detail button, a Confirm members in selected group
dialogue box will appear so that you can verify all of the destinations in that group.
Once you are finished verifying the information, click on the OK button to return to the Select Address dialogue box.
Page 2-13
2-5 Various Settings in the TX Setting Dialogue Box
4. Only those destinations selected from the Address Book will be displayed the Destination List.
* If you want to delete any of the destinations from the Destination List, select that destination and then click on the
Delete from list button. If you want to delete all of the destinations from the Destination List, click on the Delete All
button.
5. Click on the OK button. The Select Address dialogue box will close and the destinations that were registered in the
Destination List will be displayed in the TX Setting dialogue box.
Page 2-14
2-5 Various Settings in the TX Setting Dialogue Box
(2) F-Code Based Communication
1. Click on the Option button in the Address Setting tab of the TX Setting dialogue box.
The Option dialogue box will be displayed.
2. Enter the sub-address and password as it is registered in the destination fax.
• Maximum number of characters that can be entered: 20
• Characters that can be entered: 0 – 9, #, *, and a space (a space can NOT be entered as the first character)
3. Click on the OK button. The TX Setting dialogue box will be displayed once again.
Page 2-15
2-5 Various Settings in the TX Setting Dialogue Box
(3) Registering the Destination Information to be Added to the Cover Page
The type of cover page can be selected from among different templates. Destination information such as that shown below can be added
on the cover page.
Sample of English template 01
1 Recipient Name
2 Destination Company Name
3 Destination Department Name
4 Destination Fax Number
5 Sender Name
1
2
3
6 Sender Company Name
7 Sender Department Name
8 Sender Fax Number
9 Sender Telephone Number
10 Message
4
5
6
7
8
9
10
Page 2-16
2-5 Various Settings in the TX Setting Dialogue Box
2. Click on the Option button and enter the recipient information.
1 Company Name: The name of the destination company can be up
to 64 characters long.
2 Department Name: The name of the destination department can
be up to 64 characters long.
1
2
3
3 Recipient Name:The name of the person to whom you are sending
the fax can be up to 20 characters long.
3. Click on the OK button. The display will return to the TX Setting dialogue box.
4. Click on the Add to Destination List to add the entered information to the destination list.
5. If the sender information is not registered in the Default Setting dialogue box, click on the Sender Information button to
6. Click on the Cover Page tab.
The setting that was registered for the “Cover Page" under "2-4 Default Setting Dialogue Box” on page 2-7 will be
displayed.
1
3
2
4
To change the setting, perform the following procedure:
1 Attach Cover Page checkbox: Verify that there is a check mark here.
2 Template of Cover Page selection box: To change the template, select a new template here.
3 Edit Message button: Click on this button to change the message on the cover page. The message can be up to
1000 characters long.
4 Preview button: Click on this button to display the contents of the newly selected template on the Preview of Cover
Page 2-17
2-5 Various Settings in the TX Setting Dialogue Box
(4) Optional Settings
1. If you want to temporarily change the settings (the present settings will be displayed) from those which are currently
designated in the “(1) Sending Options Tab” or the “(4) Restricted access Tab” under “2-4 Default Setting Dialogue
Box” on pages 2-7 and 2-11, click on the Option tab in order to access the Option tab.
NOTE: The changes made here will only apply to the present transmission and the corresponding settings will return to
those previously made in the Default Setting dialogue box once that transmission is completed.
2. Refer to “(1) Sending Options Tab” on page 2-7 and “(4) Restricted access Tab” on page 2-11 for more detailed
information on the corresponding settings in those tabs.
3. To start the fax transmission, click on the Send button.
To continue the settings for other tabs, click on another tab.
Page 2-18
2-5 Various Settings in the TX Setting Dialogue Box
(5) Transmitting Terminal Information Data
1. If you want to temporarily change the settings (the present settings will be displayed) from those which are currently
designated in the “(2) Sender Information Tab” under “2-4 Default Setting Dialogue Box” on page 2-9, click on the
Sender Information tab in order to access the Sender Information tab.
NOTE: The changes made here will only apply to the present transmission and the corresponding settings will return to
those previously made in the Default Setting dialogue box once that transmission is completed.
2. Refer to “(2) Sender Information Tab” on page 2-9 for more detailed information on the corresponding settings in that
tab.
3. To start the fax transmission, click on the Send button.
To continue the settings for other tabs, click on another tab.
Page 2-19
2-5 Various Settings in the TX Setting Dialogue Box
(6) Machine Settings
1. If you want to temporarily change the Network FAX address (IP address or host name registered in the scanner default
settings of the machine itself) from that which is currently made in the “(3) Machine Setting Tab” under “2-4 Default
Setting Dialogue Box” on page 2-10, click on the Machine Setting tab in order to access the Machine Setting tab.
NOTE: The changes made here will only apply to the present transmission and the corresponding settings will return to
those previously made in the Default Setting dialogue box once that transmission is completed.
2. Use the keyboard to enter the Network FAX IP address (IP address registered in the scanner default settings) or the
Network FAX host name (host name registered in the scanner default settings).
3. To start the fax transmission, click on the Send button.
To continue the settings for other tabs, click on another tab.
Page 2-20
2-6 Transmission Control
Perform the following procedure when you want to use your computer to verify the status of a fax transmission currently
being processed, or to actually terminate that transmission.
1. Once a fax transmission begins being processed, a Transmission Control icon will be displayed in the Windows Task Bar.
2. Double-click on that icon in order to access the Sending Control window which indicates the status of all transmissions
being processed.
3. If you want to terminate any transmission, select that transmission and then select Cancel from the Document menu.
INFORMATION
If you right-click on the Transmission Control icon, the menu shown below will appear.
Select Exit to quit Transmission Control and delete the icon from the Task Bar.
Select Default setting in order to access the Default Setting dialogue box for Network FAX Transmission. Refer to “2-4
Default Setting Dialogue Box” on page 2-7 for more detailed information on the settings in that dialogue box.
Select Version Information if you want to check the version of your Transmission Control software.
Page 2-21
Section 3 Receiving a Fax
If Network FAX Reception is turned ON as the default setting in the fax machine itself, incoming faxes will be converted into
PDF or TIFF files and saved into the designated folder on the Server Computer (the computer on which the Scanner File
Utility has been installed). In addition, you can select to have the result of the reception sent by e-mail to a designated
computer. Notice of the reception of a fax can be sent to other computers by standard e-mail as an attached image. In
addition, it is possible to send a notice of fax reception to any other computer on the network that has the Scanner File Utility
installed.
NOTE
In order to enable fax reception, be sure to perform the required settings in both your computer and the fax machine itself.
Settings in Your Computer
• Install the Scanner File Utility in the computer in which you want to receive the fax data. Refer to “1-3 Installing the
Scanner File Utility” on page 1-6 for more detailed information on installing that utility.
Settings in the Fax Machine Itself
• Turn Network FAX Reception ON and select whether or not to have received faxes printed out at the fax machine itself.
• Under “IP address / Host Name” in the “Network FAX Registration” settings, register the IP address or host name of the
computer in which you want to receive the fax data (Server Computer).
* For more information on settings in the fax machine itself, refer to the following.
• KM-3035/4035/5035/C850: “Section 9 Network FAX Settings (Option)” in the Fax Edition of that Operation Guide
• KM-2530/3530/4030:“Section 8 Network FAX Settings (Option)” in the Fax Edition of the corresponding Operation Guide
NOTE
In order to enable fax reception, be sure that the Scanner File Utility is running.When the Scanner File Utility is running, an
icon that indicates that the utility is running will appear in the Windows Task Bar.
Page 3-1
3-1 Summary of Delivery Settings
The following describes the procedure for setting the folder in which documents received by the Network FAX will be stored.
Refer to the procedures starting from "3-2 Starting the Scanner File Utility" for more detailed information on each setting .
The folder that is used for the storage of transmitted documents can also be set using this procedure.
1 Starting up the Scanner File Utility
Use the Start button to start up the Scanner File Utility and double-click
on the icon in the Windows Task Bar in order to access the Scanner File
Utility dialogue box.
2 Setup Dialogue Box
This dialogue box is used to select the management settings for the
destination folder, such as the settings for the capacity of the hard disk, for
the display of the fax reception notification window, etc.
3 Folder Setting Dialogue Box
This dialogue box is used to set the number or the address of the folder in
which received documents will be stored.
Page 3-2
3-1 Summary of Delivery Settings
4 Delivery Setting List Dialogue Box
Delivery conditions can be selected from among the
Subaddress, Sender Fax Number, Destination Fax Number
and Other settings. In addition, you can select whether sending
a notice of fax reception by e-mail or by using the Scanner
File Utility and perform the related settings for that in the
Configuration dialogue box.
5 Delivery Setting Dialogue Box
This dialogue box is used to select the folder where documents
will be stored, the e-mail address to which the notice of fax
reception will be sent, etc.
Page 3-3
3-2 Starting the Scanner File Utility
1. Click on Start button in the Windows Task Bar and then select All Programs > Scanner User Software > Scanner File
Utility in that order. The Scanner File Utility will start up and an icon that indicates that the utility is now running will
appear in the Windows Task Bar.
2. Double-click on that icon in order to access the Scanner File Utility dialogue box.
3. To continue making delivery settings, click on the Setup button and proceed to the following procedure, “3-3 Setup
Dialogue Box”.
Page 3-4
3-3 Setup Dialogue Box
1
3
2
4
1. Perform the various settings as appropriate.
1 Hard Disk Warning (%) field
If the volume of data on the hard disk reaches the percentage registered here during saving of received fax data to
disk, a warning message will be displayed.
The desired setting can be entered directly with the keyboard or by clicking on the L and M arrows.
2 Maximum of Received File List field
This setting determines the maximum number of files that will be displayed under the Received File List in the
Scanner File Utility dialogue box. (Available setting: between 10 and 100)
Once the limit designated here is reached, the oldest data will be replaced (overwritten) by any newly received fax
data.
The desired setting can be entered directly with the keyboard or by clicking on the L and M arrows.
3 Reception Notice checkbox
Put a check mark in this checkbox if you want to have a reception notification window appear on your computer monitor
screen anytime new fax data is received. Click on the Open button in the displayed window in order to access the
Scanner File Utility dialogue box, or on the OK button to close the window.
4 Permit File Overwrite checkbox
Put a check mark in this checkbox if you want to have the corresponding old data overwritten anytime a new fax data
file is received with the same file name. If this box is not selected, a different name will be assigned to the new data file
and that file will be saved with the new name.
2. To continue making delivery settings, click on the New button and proceed to the following procedure, “3-4 Folder
Setting Dialogue Box”.
Page 3-5
3-4 Folder Setting Dialogue Box
1
2
3
4
5
1. Perform the various settings as appropriate.
1 No. field
Enter in this field the designated number of the folder in which you want to receive the fax data.
* The folder number you enter here should be the same as the folder number which was registered under the “Network
FAX Registration” settings in the fax machine.
* If you need to verify a registered folder number, refer to the following.
• KM-3035/4035/5035/C850: “Section 9 Network FAX Settings (Option)” in the Fax Edition of that Operation Guide
• KM-2530/3530/4030:“Section 8 Network FAX Settings (Option)” in the Fax Edition of the corresponding Operation
Guide
2 Folder field
Enter in this field the location of the destination folder.You can also browse for the folder location by clicking on the ...
button to the right of the field.
3 Password Setting button
This button is only available for use with the scanner function. It is not used under the Network FAX functions and
nothing will happen even if you click on it and enter a password.
4 Comment field
Enter in this field any comments that you’d like to have appear in the Setup dialogue box.
5 System Connection Program field
Click on the M arrow to the right of this field and select Network FAX Receive Handler from the resulting dropdown
menu. The Further Settings button will be made active.
2.To continue making delivery settings, click on the Further Settings button and proceed to the following procedure, “3-5 Delivery
Setting List Dialogue Box”.
Page 3-6
3-5 Delivery Setting List Dialogue Box
1. Select the desired method of data delivery from the Delivery Method list. Available settings: Subaddress, Sender Fax
number, Destination Fax number, and Other.
* For the procedure to determine delivery conditions, refer to “3-7 Determining the Destination Folder” on page 3-13 of
this manual.
Note
For more details on the Error Log button, refer to “3-9 Checking a Reception Notification Error” on page 3-14.
2. Click on the Configuration button. The Configuration dialogue box will be displayed.
Page 3-7
3-5 Delivery Setting List Dialogue Box
1
2
3
4
5
3. Select the transmission method for the notice of fax reception.
To have the notice of fax reception sent by e-mail, put a check mark in the Send reception notification E-mail checkbox.
To have the notice of fax reception sent to any other computer on the network that has the Scanner File Utility installed,
put a check mark in the Send reception notification to Scanner File Utility of other PC check box. The settings
related to the respective check marks will then be available.
1 SMTP Server Name edit box
Enter the IP address or host name of the SMTP server address to be used when sending the notice of fax reception.
(Refer to “2-6 System Setting” in the On-Line Manual for your scanner.)
The server name can be up to up to 32 characters long.
* This setting is shared for all folders, so any changes made here will affect the settings for all other folders as well.
2 SMTP Port number edit box
Enter the port number of the SMTP server to be used when sending the notice of fax reception. (Available setting:
between 1 and 32767, default setting: 25). (Refer to “2-6 System Setting” in the On-Line Manual for your scanner.)
* This setting is shared for all folders, so any changes made here will affect the settings for all other folders as well.
3 Attach file to reception notification E-mail check box
Put a check mark in this checkbox when you want to attach the image file of the received fax to the reception
notification mail.
4 Data size edit box
Select the maximum size for files attached to the reception notification mail.
You can choose from among “Low”, “Mid.”, “High” and “Non-restricted”. Files which exceed the size limit will not be
attached.
* The approximate size limits for each setting is as follows, but this should not be taken as an exact representation of
actual performance ability.
“Low”: 0.5 MB, “Mid.”: 1.0 MB, “High”: 2.0 MB
5 Retention period of reception notification edit box
Set the number of days, between 0 and 31, that retransmission of the notice will be attempted in case the computer
set to receive the notice of fax reception is not turned on.
4. Click on the OK button. The display will return to the Delivery Setting List dialogue box.
5. To continue making delivery settings, click on the New button and proceed to the following procedure, “3-6 Delivery
Setting Dialogue Box”.
Page 3-8
3-5 Delivery Setting List Dialogue Box
Sample of the notice of fax reception
Page 3-9
3-6 Delivery Setting Dialogue Box
Note: The following screen will be displayed after you select the subaddress.
1
2
3
1. Set the various delivery conditions that were selected in the Delivery Setting List dialogue box.
1 Subaddress, Sender FAX number, Destination FAX number and Other edit boxes
• Enter the subaddress: Enter between 4 and 20 digits. Be sure to enter the same 4 digits as the subaddress of the F-
code box as registered in the fax unit.
• Enter the sender fax number and the destination fax number:The fax numbers can be up to 20 digits long. Spaces, and
characters such as + (only for the Sender fax number) or *, can also be entered.
Note: Entry using the (*) wild card symbol
If, for example, you enter *123-4567, all destination fax numbers ending with 123-4567 will be stored in the same folder.
Conversely, if you enter 06-123*, all destination fax numbers starting with 06-123 will be stored in the same folder.
If you enter *123*, all destination fax numbers that include 123 will be stored in the same folder.
• For the Other setting: Fax transmission Document or Reception Fax will be displayed in the edit box.
* For more details about the subaddress, use the following references.
• KM-3035/4035/5035/C850: “Section 5 Fax Operation (functions)” in the Operation Guide for the corresponding
fax unit.
• KM-2530/3530/4030: “Section 4 Fax Operation (functions)” in the Operation Guide for the corresponding fax unit.
2 Destination Folder box
Displays the name of the folder where received files are to be stored. Select a name in the folder list that is displayed
under the box. A maximum of 256 characters will be displayed.
* New folders other than those displayed under the box can be set as well.
3 Destination Folder List
Displays a list of the sub-folders within that folder that is set as storage folder.
Folders contained within the sub-folders can also be displayed.The following settings can also be made by clicking on a
sub-folder with the right mouse button.
• “New”: To create a new folder within the folder on which you clicked.
• “Rename”: To change the name of the folder on which you clicked.
• “Properties”: A dialogue box of the shared settings for the folder on which you clicked will be displayed.
Page 3-10
3-6 Delivery Setting Dialogue Box
4
5
6
7
4 Reception Notification E-mail Address (Reception Notification PC Address) list
The notice of fax reception can be sent to computers on the network through e-mail or using the Scanner File Utility. Up
to 10 e-mail addresses or computer addresses can be entered. Perform the following procedure to enter the desired e-
mail addresses or computer addresses. (To select the transmission method for the notice of fax reception, refer to the
Note: To send the notice of fax reception to a computer on the network using the Scanner File Utility, the Scanner File
Utility must be installed on the destination computer. In addition, the delivery folder must also be set so that it is shared
on the network.
1) Click on the New button. The edit box will be displayed over the list.
2) Enter the mail address (max. 64 characters). In the case of a computer address, you can only enter a maximum of 32
characters.
Example of mail address registration
Example of computer address registration
5 ... button
Click on this button to add an e-mail address or a computer address. When registering e-mail addresses, the E-Mail
Address dialogue box will be displayed. (Refer to “G Adding an e-mail address” on page 3-12.) When sending the notice
of fax reception to a computer on the network, the Browse for Computer dialogue box will be displayed. (Refer to
6 Edit button
Click on this button to edit the e-mail address or computer address that you selected in the list.
7 Delete button
Click on this button to delete the e-mail address or computer address that you selected in the list.
Page 3-11
3-6 Delivery Setting Dialogue Box
G Adding an e-mail address
To add an e-mail address that was previously registered in other delivery settings, click on the ... button. The E-Mail
Address dialogue box will be displayed. Select an e-mail address from list and click on the Add button. When you are
through adding addresses, click on the OK button. The display will return to the Delivery Setting dialogue box.
G Adding a computer address
To see the computers on the network under the Entire Network directory and then register the address of the computer(s)
to which the notice of fax reception will be sent, click on the ... button.The Browse for Computer dialogue box will be
displayed. Select a computer in the tree and click on the OK button. The display will return to the Delivery Setting
dialogue box.
2. Click on the OK button.When creating a new folder, the confirmation box for the creation of a new folder will be displayed.
Click on the OK button one more time. The display will return to the Delivery Setting List dialogue box.
The settings for the storage folders are now completed.
Page 3-12
3-7 Determining the Destination Folder
The destination folder for delivery of the received fax data will be determined based on the settings made under “3-5
Delivery Setting List Dialogue Box” on page 3-7.
The priority of delivery conditions is as follows:
1. Subaddress
2. Sender’s fax number
3. Other
1. Any subaddress sent from the transmitting fax machine will be checked to see if it matches any of the subadresses
registered in the delivery method settings of each destination folder. If it does, the received fax data will be sent to that
folder.
2. If a subaddress was not sent, or the subaddress does not match any folder settings, the fax phone number of the
transmitting fax will be checked to see if it matches the Sender Fax Number information registered under any of the
destination folders.
3. Lastly, delivery priority will check the Other settings in order to delivered the data to a destination folder.
* Only 4-digit subadresses sent from transmitting fax machines will be checked. If a subaddress of 5 digits or longer is
received, even if the last 4 digits match, the documents will not be delivered into the designated folder.
3-8 When a notice of fax reception is sent
When a notice of fax reception is sent from the server computer, the following screen will be displayed on the computer
receiving the notice.
Note: The Scanner File Utility must be running on the computer that will receive the notice of fax reception. In addition, be
sure that there is a check mark in the Reception Notice checkbox in the Setup dialogue box. (Refer to the settings
G To see the documents that were received by fax
1. Click on the Open button in the reception notice window shown above.Then, double-click on the Scanner File Utility icon
on the Windows Task Bar. The Scanner File Utility dialogue box will be displayed.
* When a notice of fax reception is received, the icon
will appear in the Receive File List.
Page 3-13
3-9 Checking a Reception Notification Error
When a notice of fax reception is sent from the server computer to a computer on which the Scanner File Utility is installed
but the notice could be delivered because the receiving computer is not turned on, or there is some other error, the status of
the error can be checked on a list.
*
Reception notices that were successfully retransmitted will be deleted from the list. For more details on the setting for the number
of days that retransmission will be attempted, refer to step 3 of “3-5 Delivery Setting List Dialogue Box” on page 3-8.
1. Click on the Error Log button in the Delivery Setting List dialogue box. The Error Log dialogue box will be displayed.
1
2
3
4
The following items are displayed in the list.
1 Date & Time
The date and time the documents were received by the fax unit.
2 Receiving notice point PC Address
The address of the computer to which the notice of fax reception was sent.
3 Status
Shows the cause of the error. The types of error are as follows.
“connection error”: The computer to which the notice of fax reception was sent is not running or the address of the
computer to which the notice of fax reception was sent is wrong.
“version error”: The installed Scanner File Utility is older than “Version 3.7”.
4 File Name
File name of the received documents.
Page 3-14
3-10 Opening Received Faxes
Received fax data will be displayed in the Received File List within the Scanner File Utility dialogue box.
1. If the Scanner File Utility dialogue box is not open, double-click on the Scanner File Utility icon in the Windows Task
Bar.
2. Select in the Received File List the file that you want to open.
* Files listed in red (or indicated with an asterisk “*” next to the date) indicate those files which have not been opened yet.
Once a file is opened, the file is listed in black.
3. Click on the Open File button to open the selected file.
* You can also open any file by double-clicking on its name. However, if the file is a PDF file, Acrobat Reader will be
required in order to read it (Acrobat Reader is available on the provided CD-ROM).
REFERENCE
If you want to search for the folder where a specific received fax file is saved, select a file name from the list and click on the
Open Folder button. The location of that folder will be displayed.
Page 3-15
3-11 Deleting Received Faxes
Is it recommended that you delete received fax data periodically and as necessary.
1. If the Scanner File Utility dialogue box is not open, double-click on the Scanner File Utility icon in the Windows Task
Bar.
2. Select the file that you want to delete.
3. Click on the Delete button to delete the selected file from the Received File List.
* In order to actually delete the file data from your computer, you will need to delete it directly from the folder in which it
is saved.
Page 3-16
Section 4 The Address Book
The Address Book allows you to register information about individual destinations, or groups of destinations for Broadcast
Transmission, in advance. It is also possible to import and use CSV-formatted address data created with other software.
NOTE
It is necessary to have Address Book for Network FAX installed in each computer which will be used for fax transmission in
order to use the Address Book. Refer to “1-2 Installing the Address Book for Network FAX” on page 1-5 for more detailed
information on installing that software.
Page 4-1
4-1 Registering Destination Information
You will need to register destination information in advance if you want to select a destination from the Address Book when
sending a fax.
1. Click on Start button in the Windows Task Bar and then select All Programs > FAX User Software > Address Book for
Network FAX in that order from the successive menus in order to access the Address Book for Network FAX dialogue
box.
2. Select New under the Edit menu and then select New Address from the successive submenu (or click on the
New
Address button). The Registering a New Address dialogue box will appear.
Page 4-2
4-1 Registering Destination Information
3. Perform the various settings as appropriate.
1
2
3
4
5
6
7
1 Registration Name field: The destination name can be up to 16 characters long.
* You can not register a name that has already been registered.
2 Fax Number field: The destination fax number can be up to 32 characters long. [Available characters: 0 – 9, #, *, -
and a space (a space can NOT be entered as the first character)]
3 Subaddress field: The sub-address can be up to 20 characters long. [Available characters: 0 – 9, #, * and a space
(a space can NOT be entered as the first character)]
4 Password field:The password can be up to 20 characters long. [Available characters: 0 – 9, #, * and a space (a space
can NOT be entered as the first character)]
5 Company Name field: The company name can be up to 64 characters long.
6 Department Name field: The department name can be up to 64 characters long.
7 Recipient Name field: The name of the recipient can be up to 20 characters long.
4. Click on the OK button.
The entered information will be displayed in the address list area of the Address Book for Network FAX dialogue box.
5. In order to actually register the new information in the Address Book, select Apply from the File menu (or click on the
Apply button).
Page 4-3
4-2 Registering Multiple Destinations as a Group
Perform the following procedure if you want to register information for multiple destinations as a single group.
1. Select New under the Edit menu of the Address Book for Network FAX dialogue box and then select New Group from
the successive submenu (or click on the
appear.
New Group button). The Registering a New group dialogue box will
2. Click on the Add button in order to access the Add New Address dialogue box.
3. Select from the Names that can be added list the destination that you want to add to the group. it is possible to select
multiple destinations at one time.
4. Click on the Add>> button.
The selected destinations will be moved to the Address to be added list. (Up to 80 destinations can be registered to
each group.)
* If you want to delete a destination from the Address to be added list, select that destination in that list and then click on
the <<Delete button.
5. Click on the OK button to return to the Registering a New group dialogue box.
The names you selected Add New Address dialogue box will be added to the group.
* If you want to delete a destination from the group, select that destination and then click on the Delete button.
Page 4-4
4-2 Registering Multiple Destinations as a Group
6. Enter in the Registration Name field a name for the group of destinations. The group name can be up to 16 characters
long.
7. Click on the OK button.
The entered group information will be displayed in the address list area of the Address Book for Network FAX dialogue
box.
8. Click on the OK button.
9. In order to actually register the new group information in the Address Book, select Apply from the File menu (or click on
the
Apply button).
Page 4-5
4-3 Address/Group Copy
It is possible to copy a registered address or group and partly edit the contents for registration as a new address or group.
This is convenient for cases when the contents you want to register are close or similar to already registered information.
1. With the Address Book for Network FAX dialogue box open, select the address or group that you want to copy.
2.Under the Edit menu, click on Copy and then on Paste.The Registering a New Address dialogue box or the Registering
a New Group dialogue box, as appropriate, will be displayed.
3. Edit the registered information.
4. Click on the OK button.
5. In order to actually register the edited information in the Address Book, select Apply from the File menu (or click on the
Apply button).
Page 4-6
4-4 Editing Individual and Group Destination Information
(1) Editing Information for an Individual or Group Destination
Perform the following procedure to edit information for an individual or group destination.
1. With the Address Book for Network FAX dialogue box open, select the individual or group destination entry that
contains the information that you want to edit.
An icon will appear above the list to indicate whether it is an individual (
) or group destination (
).
2. Click on the
Edit button (or double-click on the entry you want to edit).
3. Edit the registered information.
To edit information for an individual destination, refer to “4-1 Registering Destination Information” on page 4-2.
To edit information for a group of destinations, refer to “4-2 Registering Multiple Destinations as a Group” on page 4-4.
4. Click on the OK button.
5. In order to actually register the edited information in the Address Book, select Apply from the File menu (or click on the
Apply button).
Page 4-7
4-4 Editing Individual and Group Destination Information
(2) Editing Information for More than One Individual or Group Destinations
It is possible to edit the information for multiple registered destinations at the same time. This is convenient when, for
example, you want to change the company name for different registered departments of the same company.
1. With the Address Book for Network FAX dialogue box open, select the multiple destinations that you want to edit.
2. Click on the
Edit button. The Multiple Address Edit dialogue
box will be displayed.
3. Put a check mark in the checkbox of the common item that you want
to edit (“Registration Name”, “FAX Number”, “Subaddress”,
“Password”, “Company Name”, “Department Name”, “Recipient
Name” for an individual destination, and “Registration Name” for
Group Destinations), and then enter the new information.
4. Click on the OK button. The display will return to the Address Book for Network FAX dialogue box and the edited
information will be displayed.
5. In order to actually register the edited information in the Address Book, select Apply from the File menu (or click on the
Apply button).
Page 4-8
4-4 Editing Individual and Group Destination Information
(3) Search/Replace the Contents of a Particular Entry Item
It is possible to search for and replace data for any entry item for multiple registered individual or group destinations. For example,
if a change is made to a city's area code, you can select multiple destinations and change the area code for their fax number with
the new one all in one batch.
1. With the Address Book for Network
FAX dialogue box open, select the
multiple individual or group
destinations that you want to edit.
2. Point at Replace under the Edit menu, or click on the
Replace button. The Replace text dialogue box will be
displayed.
3. Put a check mark in the checkbox of the common item that you want to edit ("Registration Name", "FAX Number",
"Subaddress", "Password", "Company Name", "Department Name", and "Recipient Name" for an individual destination
and "Registration Name" for Group Destinations).
4. Enter the information that you want to change in the Find text
field (left column) for the corresponding item.
Enter the new information in the edit box of the Replace text
field (right column).
Note: For fax numbers, the leftmost sequence that matches
the entered information will be replaced. (Example) With fax
number “555-33-1555”, if you enter “555” in the Find text field
and “111” in the Replace text field, the fax number will be
changed to “111-33-1555”. For other items, all matching
sequences will be replaced.
5. Click on the OK button. The display will return to the Address
Book for Network FAX dialogue box and the edited
information will be displayed.
6.In order to actually register the edited information in the Address
Book, select Apply from the File menu (or click on the
Apply button).
Page 4-9
4-5 Deleting Individual and Group Destination Information
1. With the Address Book for Network FAX dialogue box open, select the individual or group destination entry that you
want to delete.
An icon will appear above the list to indicate whether it is an individual (
) or group destination (
).
2. Click on the
Delete button.
The selected entry will be deleted from the list.
3. In order to actually delete the selected entry from the Address Book, select Apply from the File menu (or click on the
Apply button).
4-6 Importing Address Data
(1) Importing FDT Files
You can import and use FDT formatted address lists (file name: xxxx.fdt) previously made with this Address Book software.
1. With the Address Book for Network FAX dialogue box open, select Import under the File menu and then select
Address Book from the successive submenu. The Open dialogue box will appear.
2. Access the folder that contains the desired FDT file.
Page 4-10
4-6 Importing Address Data
3. Select the desired FDT file and then click on the Open button.
(2) Importing CSV Files
You can import and use CSV-formatted address lists created with other software.
1. With the Address Book for Network FAX dialogue box open, select Import under the File menu and then select CSV
file from the successive submenu. The Open dialogue box will appear.
2. Access the folder that contains the desired CSV file.
3. Select the desired CSV file and then click on the Open button. The Import dialogue box will appear.
4. Use the dropdown menus to select the fields in the CSV file that correspond to the various fields (Registration Name, Fax
Number, etc.) in this Address Book.
Page 4-11
4-6 Importing Address Data
5. Click on the OK button in order to access the Confirm imported contents dialogue box.
6. Check the imported addresses and select those entries that you want to add to this Address Book.The number of entries
that you select will be displayed in the Number of selected addresses field. Click on the Add To Address Book button
and the total number of entries that will be added to this Address Book will be displayed in the Number of added
addresses field. (The addresses you add will be deleted from the list.)
NOTE
If either of the following symbols appears in the list, that address can NOT be added to this Address Book as is.
?: That name is already registered in this Address Book, or the number of characters in the name exceed the acceptable
limit.
!: This information may include data which can not be handled by this Address Book.
In either of the above cases, click on the Edit button and refer to the character limits for each field under “4-1 Registering
Destination Information” on page 4-3 and correct the data as appropriate.
7. Once you are finished with the importing procedure, click on the OK button.
Page 4-12
4-7 Exporting Address Data
You can save the data created using this Address Book software as a FDT file.
1. With the Address Book for Network FAX dialogue box open, select Save as under the File menu. The Save as
dialogue box will appear.
2. Select the location in which you want to save the data.
3. Enter the desired file name and then click on the Save button.
Page 4-13
Section 5 Specifications
G Operating Environment
Hardware............................................. IBM PC-AT compatible computer
Interface .............................................. 10BASE-T or 100BASE-TX
Operating system ................................ Windows NT 4.0 (Server, Workstation) + SP5 or later,
Windows 2000 (Professional, Server, Advanced Server),
Windows 98 (Second Edition), Windows 95 (OSR2 or later),
Windows Me and Windows XP
G Network FAX Transmission
Transmission Resolution ..................... Normal (200 dpi x 100 dpi equivalent)
Fine (200 dpi x 200 dpi equivalent)
Ultra fine (400 dpi x 400 dpi equivalent)
Document Size.................................... Standard paper sizes only (Maximum 11" x 17" [A3])
Automatic Redialing ............................ Controlled at the fax machine
Delayed TX ......................................... Based on settings in the Network FAX Driver (setting is possible to any 1 minute
increment within the subsequent 24 hour period)
Concurrent print .................................. Fax transmission and concurrent print-out at the fax machine is available
Transmitted Faxes .............................. Fax data files delivered to designated computer (where Scanner File Utility is installed)
in designated format (PDF or Multi-page TIFF)
Broadcast Transmission...................... Up to 80 destinations
Rotation Transmission ........................ Available
Restricted Access ............................... Based on entry of access code in the Network FAX Driver. Viable access code
registration and Restricted Access management performed at the copy machine*.
(* Performed at the fax machine in the case of models other than the KM-3035/
4035/5035/C850.)
Cover Page ......................................... Format settings available in the Network FAX Driver
Maximum No. of Fax Pages ................ Up to 256 pages (when sent using Windows 95/98/Me)
Up to 1000 pages (when sent using Windows NT/2000/XP)
*The maximum amounts noted above may not be attainable depending upon certain
fax conditions.
G Network FAX Reception
Received Faxes .................................. Fax data files delivered to designated computer (where Scanner File Utility is installed)
in designated format (PDF or Multi-page TIFF)
Reception Notice................................. Notice of fax reception by e-mail (to a maximum of 10 e-mail addresses) or directly
to computers on the network (to a maximum of 10 computer addresses)
Long Fax Pages .................................. Long pages are not separated for delivery. Pages which exceed 17" [431 mm] can
only be saved as TIFF files.
G Miscellaneous
Address Book...................................... Individual and group destination registration available (up to 3000 destinations)
Imported file format: CSV or FDT (proprietary format)
Exported file format: FDT (proprietary format)
Network FAX Transmission Report ..... Can be delivered as an e-mail attachment to a designated address (includes
transmission under Restricted Access)
Page 5-1
|
Lexmark 43w User Manual
Lexmark 2300 Series User Manual
Panasonic Cw C120vu User Manual
Philips Cd450 User Manual
Philips Sc767 User Manual
Ricoh Aficio Mp 1100 User Manual
Samsung Db98 17032ae User Manual
Sharp Air Cleaner Fp A40u User Manual
Trion Cm2 User Manual
Zebra Technologies Zebra Xi4tm User Manual