Register your product and get support at
CD450
CD455
SE450
SE455
Quick start guide
Connect
1
Install
2
Enjoy
3
Connect
1
Connect the base station
1. Place the base station in a central
location near the telephone line socket
and electricity socket.
2. Connect the output plug of the mains
adapter to the bottom of the base
station.
3. Connect the mains adapter to a
standard wall outlet.
4. Connect the telephone line cord to the phone socket at the bottom of the base
station and the wall phone socket.
Install
2
Insert rechargeable batteries and charge
Install batteries
Charge handset for 24 hours
A
B
2 4
1. Place the 2 rechargeable batteries (included) into the battery compartment.
2. Slide the battery door firmly into place.
Enjoy
3
Make a call
Dial the number (maximum 24 digits) and press
OR
r
or
v
.
Press
r
or
v
to take the line, and dial the phone number.
Answer a call
When the phone rings, press
r
or
v
.
End a call
To end a call, press
e
.
Adjust the earpiece or speaker’s volume
During a call, press or to adjust the volume. Press OK to confirm. The
u
d
earpiece or speakerís volume is adjusted and the phone goes back to the call screen.
Set your handset’s ring melody
1. Press
m
.
2. Select PERSONAL SET > HANDSET TONES > RING TONES. Press OK.
3. Scroll to the desired melody. Press OK. The setting is saved.
Save a phonebook record
1. Press
m
.
2. Select PHONEBOOK > NEW ENTRY. Press OK.
3. Enter the name. Press OK.
4. Enter the number. Press OK to confirm. Your new record is saved.
Access phonebook
1. Press
2. Press
3. Press
d
u
in standby.
or to browse the phonebook.
d
>
to view the details of a record.
Call from the phonebook
1. Press
d
u
in standby.
2. Press
or d to select a phonebook entry.
3. Press r. The call is initiated.
Listen to new messages recorded on the answering machine (for CD455/SE455)
Press on the base station to turn on the answering machine (the LED is turned on).
The outgoing message is played.
Press on the base station to play phone messages (the first recorded message
will be played first).
o
p
Press
Press
s
R
to skip the current message and play the next message.
to go back to the previous message (if pressed within 1 second of current
message playback).
Press
R
to replay current message (if pressed after 1 second of current message
playback).
Press
-+
to adjust speaker volume during message playback.
Press
Press
f
to delete the current message.
o
again to turn off the answering machine (the LED is turned off).
Refer to your CD455/SE455 User Manual for details about the answering machine
functions.
Troubleshooting
For more information, please refer to the User Manual that came with your phone.
Problem(s) Tip(s)
•
•
•
Signal icon flashing
•
The handset may be out of range. Move closer to the
base station.
If the handset displays UNREGISTERED, register the
handset again.
•
Handset on the
charger does not
charge
•
•
•
Check that the batteries are inserted correctly.
Make sure the handset is placed properly on the charger.
Batteries may be defective. Purchase new ones from
your dealer.
No display
•
•
Check that the batteries are charged.
Check the power and phone connections.
•
•
Handset does not ring
•
•
Check that the handset ringer is turned on.
Caller number is not
displayed
Service is not activated. Check your subscription with
your network provider.
•
Caller does not hear
me clearly
•
•
Move closer to the base station.
Move the base station at least one meter away from
any electronic appliances.
Welcome to Philips!
Register your product and get support at
Need help?
User Manual
See the user manual that came with your phone.
Online help
2008 ©Koninklijke Philips Electronics N.V.
All rights reserved.
Reproduction in whole or in part is prohibited without the
written consent of the copyright owner.
Printed in China
3111 285 46431
|