EN
User manual
Washing Machine
ZWH 5145
Download from Www.Somanuals.com. All Manuals Search And Download.
• If the machine is situated on a carpeted floor, please
adjust the feet in order to allow air to circulate freely
under the appliance.
• Always be sure, that there is no water leakage from ho-
ses and their connections after the installation.
• If the appliance is installed in a location subject to
frost, please read the “dangers of freezing” chapter.
• Any plumbing work required to install this appliance
should be carried out by a qualified plumber or compe-
tent person.
aged so that the inside of the washing machine is ac-
cessible.
Child safety
• This appliance is not intended for use by person (in-
cluding children) with reduced physical sensory or
mental capabilities or lack of experience and knowl-
edge unless they have been given supervision or in-
struction concerning use of the appliance by a person
responsible for their safety.
• The packaging components (e.g. plastic film, polystyr-
ene) can be dangerous to children - danger of suffoca-
tion! Keep them out of children’s reach
• Any electrical work required to install this appliance
should be carried out by a qualified electrician or com-
petent person.
• Keep all detergents in a safe place out of children’s
reach.
Use
• Make sure that children or pets do not climb into the
drum. To prevent children and pets becoming trapped
inside the drum this machine incorporates a special
feature.
• This appliance is designed for domestic use. It must
not be used for purposes other than those for which it
was designed.
• Only wash fabrics which are designed to be machine
washed. Follow the instructions on each garment label.
• Do not overload the appliance. See the Washing Pro-
gramme Table.
• Before washing, ensure that all pockets are empty and
buttons and zips are fastened. Avoid washing frayed or
torn articles and treat stains such as paint, ink, rust,
and grass before washing. Underwired bras must NOT
be machine washed.
To activate this device, ro- To disable this device and
• Garments which have been in contact with volatile pe-
troleum products should not be machine washed. If
volatile cleaning fluids are used, care should be taken
to ensure that the fluid is removed from the garment
before placing in the machine.
• Never pull the power supply cable to remove the plug
from the socket; always take hold of the plug itself.
tate the button (without
pressing it) inside the
door clockwise until the
groove is horizontal. If
necessary use a coin.
restore the possibility of
closing the door, rotate the
button anti-clockwise until
the groove is vertical.
• Never use the appliance if the power supply cable, the
control panel, the working surface or the base are dam-
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Product description
1
2
3
4
5
6
Detergent dispenser drawer
Control panel
Door opening handle
Rating plate
Drain pump
Adjustable feet
1
2
3
4
5
6
Detergent dispenser drawer
Compartment for detergent used for prewash and soak
phase or for stain remover used during the stain action
phase (if available). The prewash and soak detergent is
added at the beginning of the wash programme. The stain
remover is added during the stain action phase.
Compartment for powder or liquid detergent used for
main wash. If using liquid detergent pour it just before
starting the programme.
Compartment for liquid additives (fabric softener,
starch).
Follow the product manufacturer’s recommendations on
quantities to use and do not exceed the «MAX» mark in the
detergent dispenser drawer. Any fabric softener or starch-
ing additives must be poured into the compartment before
starting the wash programme.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Control panel
Below is a picture of the control panel. It shows the programme selector dial as well as the buttons and pilot lights.
These are presented by relevant numbers on the following pages.
1
2
3
4
5
6
7
1
2
3
Programme selector dial
5
START/PAUSE button (Start/Pauze — Départ/
Pause)
DELAY START button (Startuitstel — Départ différé)
Indicator pilot lights
SPIN reduction button (Centrifugeren — Essorage)
OPTIONS button (Opties — Option)
– Prewash (Voorwas — Prélavage)
– Super Quick (Supersnel — Rapide)
6
7
4
EXTRA RINSE button (Extra spoelen — Rinçage
plus)
Table of symbols
Cotton
Drain
Synthetics
Delicates
Handwash
Wool
Rinse Hold
Prewashing + Washing
Rinses + Spin
End
+
+
Rinses
Spin
Programme Selector Dial
Rinse hold
It allows you to switch the appliance on/off and/or to se-
lect a programme.
By selecting this function the water of the last rinse is not
emptied out to prevent the fabrics from creasing. Before
opening the door it will be necessary to empty out the wa-
ter. To empty out the water, please read the paragraph «At
the end of the programme».
Available options:
Spin
By pressing this button you can change the spin speed of
the selected programme or to select Rinse Hold option.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Prewash
Indicator pilot light (7)
By selecting this option the machine performs a prewash
cycle before the main wash phase. The washing time will
be prolonged. This option is recommended for heavily
soiled laundry.
Super Quick
Short cycle for lightly soiled items or for laundry which
needs only freshening up. We recommend you to reduce
the fabrics loading.
Extra Rinse
When selecting a washing programme both lights 7.1
and 7.2 illuminate.
After having pressed the button 5 the only light corre-
sponding to the running phase stays on. The machine
starts working and the door is locked.
The light 7.3 illuminates at the end of the washing cy-
cle. After a few minutes the door can be opened.
This appliance is designed to save energy. If it necessary
to rinse the laundry using an extra quantity of water (extra
rinse), select this option. Some additional rinses will be
performed. This option is recommended for people who
are allergic to detergents, and in areas where the water is
very soft.
If the draining programme is selected any light
will illuminate.
Start Pause
This button allows you to start or to interrupt the selected
programme.
Delay Start
The start of the programme can be delayed by 3, 6 or 9
hours by means of this button.
First use
• Ensure that the electrical and water connections
comply with the installation instructions.
• Remove the polystyrene block and any material
from the drum.
activate the ECO valve. Then run a cotton cycle at
the highest temperature without any laundry in
the machine, to remove any manufacturing resi-
due from the drum and tub. Pour 1/2 a measure
of detergent into the main wash compartment and
start the machine.
• Pour 2 litres of water into the main wash com-
partment
of the detergent drawer in order to
Daily use
Load the laundry
Measure out the detergent and the fabric softener
Open the door by carefully
pulling the door handle
outwards. Place the laun-
dry in the drum, one item
at a time, shaking them
out as much as possible.
Close the door.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Select the Delay Start by pressing button 6
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent required, pour it into the
Before you start the programme, if you wish to delay the
start, press the button 6 repeatedly, to select the desired
delay. The relevant light illuminates.
You must select this option after you have set the pro-
gramme and before you start the programme.
You can cancel or modify the delay time at any moment,
before you press button 5.
main wash compartment
or in the appropriate com-
partment if the selected programme/option it requires
(see more details in "Detergent dispenser drawer").
If required, pour fabric softener into the compartment
marked
(the amount used must not exceed the
«MAX» mark in the drawer). Close the drawer gently.
Selecting the delayed start:
1. Select the programme and the required options.
2. Select the delay start by pressing the button 6.
3. Press button 5:
Select the required programme by turning the
programme selector dial (1)
Turn the programme selector dial to the required pro-
gramme. The washing machine will automatically select
the maximum spin value provided for the programme you
have chosen. You can change this value by pressing the
corresponding button. The green pilot light of the button 5
starts to flash.
– the machine starts its hourly countdown.
– The programme will start after the selected delay
has expired.
Cancelling the delayed start after having started the pro-
gramme:
1. Set the washing machine to PAUSE by pressing but-
ton 5.
2. Press button 6 once, the light relevant to the selected
delay goes off
3. Press button 5 again to start the programme.
The Delay Start can not be selected with DRAIN pro-
gramme.
The selector dial can be turned either clockwise or coun-
terclockwise. Turn to position
Switching the machine off.
to reset programme/
At the end of the programme the selector dial must be
turned to position , to switch the machine off.
Caution! If you turn the programme selector dial to
another programme when the machine is working,
the red pilot light of button 5 will blink 3 times to indicate
a wrong selection. The machine will not perform the new
selected programme.
Important! The selected delay can be changed only after
selecting the washing programme again.
The door will be locked throughout the delay time. If you
need to open the door, you must set the machine to
PAUSE (by pressing the button 5) and then wait a few
minutes. After you have closed the door, press the button
5 again.
Select the spin speed or Rinse Hold option by
pressing button 2
The relevant light will light up.
When selecting a programme, the light corresponding to
the maximum speed allowed for that programme will illu-
minate.
Start the programme by pressing button 5
To start the selected programme, press the button 5, the
corresponding green pilot light stops blinking. The pilot
light corresponding to the running phase illuminates. The
appliance starts operating and the door is locked.
To interrupt a programme which is running, press the but-
ton 5: the corresponding green pilot light starts blinking.
To restart the programme from the point at which it was
interrupted, press the button 5 again. If you have chosen a
delayed start, the machine will begin the countdown.
If an incorrect option is selected, the red pilot light of the
button 5 blinks 3 times.
Select the available options by pressing buttons 3
and 4
Depending on the programme, different functions can be
combined. These must be selected after choosing the de-
sired programme and before starting the programme.
When these buttons are pressed, the corresponding pilot
lights illuminate. When they are pressed again, the pilot
lights go out. If an incorrect option is selected, the inte-
grated red pilot light of the button 5 flashes for 3 times.
For the compatibility among the washing pro-
grammes and the options see chapter «Washing
Programmes».
7
Download from Www.Somanuals.com. All Manuals Search And Download.
The light 7.3 illuminates. After a few minutes the door can
be opened.
Interrupting a programme
Press the button 5 to interrupt a programme which is run-
ning, the corresponding green pilot light starts blinking.
Press the button again to restart the programme.
If a programme or an option that ends with water left in the
tub has been selected, the light 7.3 illuminates but the
door remains locked to indicate that the water must be
emptied out before opening the door. During this time, the
drum continues to run at regular intervals until the water
draining.
Cancelling a programme
Turn the selector dial to
to cancel a programme which
is running. Now you can select a new programme.
Follow the below instructions to empty out the water:
Opening the door
1.
Turn the programme selector dial to
.
After the programme has started the door is locked. If, for
any reason, you need to open it, set firstly the machine to
PAUSE by pressing the button 5. After a few minutes it
will be possible to open the door.
2. Select the draining or spinning programme.
3. Reduce the spin speed if needed, by pressing the
relevant button.
If the door remains locked, this means that the machine is
already heating or that the water level is too high. In any
case, do not try to force the door!
If you cannot open the door but you need to open it you
have to switch the machine off by turning the selector dial
4. Press button 5.
At the end of the programme, the door can be now
opened. Turn the programme selector dial to
the machine off.
Remove the laundry from the drum and carefully check
that the drum is empty. If you do not intend to carry out
another wash, close the water tap. Leave the door open to
prevent the formation of mildew and unpleasant smells.
to switch
to
. After a few minutes the door can be opened (pay
attention to the water level and temperature!).
After closing the door, it is necessary to select the pro-
gramme and options again and to press button 5.
At the end of the programme
The machine stops automatically. The pilot light of button
5 and the pilot light corresponding to the just finished
washing phase go off.
Stand by: once the programme has finished after a
few minutes the energy saving system is enabled
with the pilot lights switched on. By pressing any button
the appliance will come out of the energy saving status.
Helpful hints and tips
Rub particularly soiled areas with a special detergent or
detergent paste.
Treat curtains with special care. Remove hooks or tie them
up in a bag or net.
Sorting out the laundry
Follow the wash code symbols on each garment label and
the manufacturer’s washing instructions. Sort the laundry
as follows: whites, coloureds, synthetics, delicates, wool-
lens.
Removing stains
Stubborn stains may not be removed by just water and de-
tergent. It is therefore advisable to treat them prior to
washing.
Blood: treat fresh stains with cold water. For dried stains,
soak overnight in water with a special detergent then rub
in the soap and water.
Oil based paint: moisten with benzine stain remover, lay
the garment on a soft cloth and dab the stain; treat several
times.
Before loading the laundry
Never wash whites and coloureds together. Whites may
lose their «whiteness» in the wash.
New coloured items may run in the first wash; they should
therefore be washed separately the first time.
Button up pillowcases, close zip fasteners, hooks and
poppers. Tie any belts or long tapes.
Remove persistent stains before washing.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Dried grease stains: moisten with turpentine, lay the gar-
ment on a soft surface and dab the stain with the fingertips
and a cotton cloth.
• powder detergents for all types of fabric
• powder detergents for delicate fabrics (60°C max) and
woollens
Rust: oxalic acid dissolved in hot water or a rust removing
product used cold. Be careful with rust stains which are
not recent since the cellulose structure will already have
been damaged and the fabric tends to hole.
Mould stains: treat with bleach, rinse well (whites and fast
coloureds only).
• liquid detergents, preferably for low temperature wash
programmes (60°C max) for all types of fabric, or spe-
cial for woollens only.
The detergent and any additives must be placed in the ap-
propriate compartments of the dispenser drawer before
starting the wash programme.
If using liquid detergents, a programme without prewash
must be selected.
Your appliance incorporates a recirculation system which
allows an optimal use of the concentrated detergent.
Follow the product manufacturer’s recommendations on
quantities to use and do not exceed the «MAX» mark in
the detergent dispenser drawer.
Grass: soap lightly and treat with bleach (whites and fast
coloureds only).
Ball point pen and glue: moisten with acetone1), lay the
garment on a soft cloth and dab the stain.
Lipstick: moisten with acetone as above, then treat stains
with methylated spirits. Treat any residual marks with
bleach.
Red wine: soak in water and detergent, rinse and treat with
acetic or citric acid, then rinse. Treat any residual marks
with bleach.
Quantity of detergent to be used
The type and quantity of detergent will depend on the type
of fabric, load size, degree of soiling and hardness of the
water used.
Follow the product manufacturers’ instructions on quanti-
ties to use.
Use less detergent if:
• you are washing a small load
Ink: depending on the type of ink, moisten the fabric first
with acetone1), then with acetic acid; treat any residual
marks on white fabrics with bleach and then rinse thor-
oughly.
Tar stains: first treat with stain remover, methylated spirits
or benzine, then rub with detergent paste.
• the laundry is lightly soiled
• large amounts of foam form during washing.
Detergents and additives
Good washing results also depend on the choice of deter-
gent and use of the correct quantities to avoid waste and
protect the environment.
Although biodegradable, detergents contain substances
which, in large quantities, can upset the delicate balance
of nature.
The choice of detergent will depend on the type of fabric
(delicates, woollens, cottons, etc.), the colour, washing
temperature and degree of soiling.
All commonly available washing machine detergents may
be used in this appliance:
Degrees of water hardness
Water hardness is classified in so-called “degrees” of
hardness. Information on hardness of the water in your
area can be obtained from the relevant water supply com-
pany, or from your local authority. If the water hardness
degree is medium or high we suggest you to add a water
softener following always the manufacturer’s instructions.
When the degree of hardness is soft, readjust the quantity
of the detergent.
1) do not use acetone on artificial silk
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing Programmes
Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
Detergent
Compartment
Options
COTTONS (Katoen-Coton)
90° - 60°
Main wash - Rinses
Maximum spin speed at 1400 rpm
Max. load 7 kg - Reduced load 3,5 kg 1)
SPIN REDUCTION
RINSE HOLD
PREWASH 2)
SUPER QUICK
EXTRA RINSE
White cotton (heavily or normally soiled items).
COTTON ECO (Eco)
60°-40°
Main wash - Rinses
Maximum spin speed at 1400 rpm
Max. load 7 kg
SPIN REDUCTION
RINSE HOLD
PREWASH 2)
EXTRA RINSE
White or fast colour cotton (normally or slightly soiled items).
This programme can be selected for slightly or normally soiled
cotton items. The temperature will decrease and the washing
time will be extended. This allows to obtain a good washing ef-
ficiency by saving energy.
COTTONS (Katoen-Coton)
60° - 40° - 30°
Main wash - Rinses
Maximum spin speed at 1400 rpm
Max. load 7 kg - Reduced load 3,5 kg1)
SPIN REDUCTION
RINSE HOLD
PREWASH 2)
SUPER QUICK
EXTRA RINSE
White and coloured cotton (normally soiled items).
SYNTHETICS (Synthetisch-Synthétique)
60° - 40° - 30°
Main wash - Rinses
SPIN REDUCTION
RINSE HOLD
PREWASH 2)
SUPER QUICK
EXTRA RINSE
Maximum spin speed at 900 rpm
Max. load 3,5 kg - Reduced load 2 kg 1)
Synthetic or mixed fabrics: underwear, coloured garments, non-
shrink shirts, blouses.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
Detergent
Compartment
Options
SYNTHETICS EASY IRON (Antikreuk-Repassage facile)
40°
Main wash - Rinses
Maximum spin speed at 900 rpm
Max. load 1 kg
SPIN REDUCTION
RINSE HOLD
PREWASH 2)
EXTRA RINSE
Synthetic or mixed fabrics
Selecting this programme the laundry is gently washed and
spun to avoid any creasing. In this way ironing is easier. Fur-
thermore the machine will perform additional rinses.
DELICATES (Fijne was-Délicats)
40° - 30°
Main wash - Rinses
Maximum spin speed 700 rpm
Max. load kg 3,5 - Reduced load kg 2 1)
RINSE HOLD
PREWASH 2)
SUPER QUICK
EXTRA RINSE
Delicate fabrics: acrylics, viscose, polyester.
HANDWASH (Handwas-Lavage à la main)
40° - 30°
SPIN REDUCTION
RINSE HOLD
Main wash - Rinses
Maximum spin speed at 900 rpm
Max. load 2 kg
Special programme for delicate fabrics with «hand washing»
care symbol.
WOOL (Wol-Laine)
40°
SPIN REDUCTION
RINSE HOLD
Main wash - Rinses
Maximum spin speed at 900 rpm
Max. load 2 kg
Washing programme for machine washable wool as well as for
hand washable woollens and delicate fabrics. Note: A single or
bulky item may cause imbalance. If the appliance doesn’t per-
form the final spin phase, add more items, redistribute the load
manually and then select the spinning programme.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
Detergent
Compartment
Options
SPORT INTENSIVE (Sport intensief-Sport Intensif)
40°
Prewash - Main wash - Rinses
SPIN REDUCTION
RINSE HOLD
EXTRA RINSE
Maximum spin speed at 900 rpm
Max. load 2.5 kg
This programme is suitable for washing heavily soiled sport
items. The machine will add automatically a prewash phase be-
fore the main wash to eliminate mud stains. (For this phase we
recommend that you do not put detergent in the appropriate
compartment to rinse clothing with only water).
CURTAINS (Gordijnen-Voilages)
40°
SPIN REDUCTION
RINSE HOLD
Prewash - Main wash - Rinses
EXTRA RINSE
Maximum spin speed at 700 rpm
Max. load 2 kg
This programme it is possible to wash with an extra water load.
The machine will add automatically a prewash phase before the
main wash to eliminate the dust. (Do not put any detergent in
the prewash compartment).
RINSES
Rinses
SPIN REDUCTION
RINSE HOLD
Maximum spin speed at 1400 rpm
EXTRA RINSE
Max. load 7 kg
With this programme it is possible to rinse and spin cotton gar-
ments which have been washed by hand. The machine performs
3 rinses, followed by a final long spin. The spin speed can be
reduced.
DRAIN
Draining of water
Max. load 7 kg
For emptying out the water of the last rinse in programmes with
the Rinse Hold option selected.
SPIN
SPIN REDUCTION
Drain and long spin
Maximum spin speed at 1400 rpm
Max. load 7 kg
Separate spin for hand washed cotton garments and after pro-
grammes with the Rinse Hold option selected. You can choose
the spin speed by pressing the relevant button to adapt it to the
fabrics to be spun.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
Detergent
Compartment
Options
O = OFF
For cancelling the programme which is running or to switch the machine off .
1) If you select the Super Quick option by pressing button 3, we recommend that you reduce the maximum load as indicated. Full
loading is possible however with somewhat reduced cleaning results.
2) If using liquid detergents, a programme without PREWASH must be selected.
What to do if…
Certain problems are due to lack of simple maintenance or • 4 flashes = «The washing machine does not start», fol-
oversights, which can be solved easily without calling out
an engineer. Before contacting your local Service Centre,
please carry out the checks listed below.
During machine operation it is possible that the red pilot
light of button 5 blinks to indicate that the machine is not
working.
It is possible to recognize the fault machine by the number
of button 5 light flashes. If the number of flashes is differ-
ent from the ones indicated below, this is related to a fault
that you can not solve. In this case, contact your local
Service Centre.
Press simultaneously the buttons 4 and 5 for a few sec-
onds. The red button 5 light will flash for a short time as
described (the green flash is not to be considered) :
low the corresponding suggestions in «Possible
cause/Solutions» box and restart the programme.
• 1 flash = «The machine does not fill», follow the corre-
sponding suggestions in «Possible cause/Solutions»
box and restart the programme.
• 2 flashes = «The machine does not empty and/or does
not spin», follow the corresponding suggestions in
«Possible cause/Solutions» box and restart the pro-
gramme.
Once the problem has been eliminated, press the button 5
to restart the programme. If after all checks, the problem
persists, contact your local Service Centre.
Problem
Possible cause/Solution
The door has not been closed (the button 5 red light blinks).
• Close the door firmly.
The plug is not properly inserted in the power socket.
• Insert the plug into the power socket.
There is no power at the socket.
• Please check your domestic electrical installation.
The washing machine does not start: The main fuse has blown.
• Replace the fuse.
The programme selector dial is not correctly positioned and/or the button 5
has not been pressed.
• Please turn the selector dial and/or press the button 5 again.
The delay start has been selected.
• If the laundry are to be washed immediately, cancel the delay start.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Possible cause/Solution
The water tap is closed (the button 5 red light blinks).
• Open the water tap.
The inlet hose is squashed or kinked (the button 5 red light blinks).
• Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter are blocked (the button 5 red
light blinks).
The machine does not fill:
• Clean the water inlet filters. (See ‘Cleaning the water inlet filters’ for more
details).
The door is not properly closed (the button 5 red light blinks).
• Close the door firmly.
The drain hose is squashed or kinked (the button 5 red light blinks).
• Check the drain hose connection.
The drain filter is clogged (the button 5 red light blinks).
• Clean the drain filter.
An option or a programme that ends with the water still in the tub or a that
eliminates all the spinning phases has been selected.
The machine does not empty and/or
does not spin:
• Select the draining or spinning programme.
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
Too much detergent or unsuitable detergent (creates too much foam) has been
used.
• Reduce the detergent quantity or use another one.
Check whether there are any leaks from one of the inlet hose fittings. It is not
always easy to see this as the water runs down the hose; check to see if it is
damp.
There is water on the floor:
• Check the water inlet hose connection.
The drain or inlet hose is damaged.
• Replace it with a new one.
The filter has not been properly screwed in after cleaning action.
• Screw the filter fully in.
Too little detergent or unsuitable detergent has been used.
• Increase the detergent quantity or use another one.
Stubborn stains have not been treated prior to washing.
• Use commercial products to treat the stubborn stains.
The correct temperature was not selected.
Unsatisfactory washing results:
• Check if you have selected the correct temperature.
Excessive laundry load.
• Reduce the laundry load.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Possible cause/Solution
The programme is still running.
• Wait the end of washing cycle.
The door lock has not been released.
• Wait a few minutes before opening the door.
There is water in the drum.
The door will not open:
• Select drain or spin programme to empty out the water.
The transit bolts and packing have not been removed.
• Check the correct installation of the appliance.
The support feet have not been adjusted
• Check the correct levelling of the appliance.
The laundry is not evenly distributed in the drum.
The machine vibrates is noisy:
• Redistribute the laundry.
Maybe there is very little laundry in the drum.
• Load more laundry.
The electronic unbalance detection device has cut in because the laundry is
not evenly distributed in the drum. The laundry is redistributed by reverse rota-
tion of the drum. This may happen several times before the unbalance disap-
pears and normal spinning can resume. If, after 10 minutes, the laundry is still
not evenly distributed in the drum, the machine will not spin. In this case, re-
distribute the load manually and select the spin programme.
Spinning starts late or the machine
does not spin:
• Redistribute the laundry.
The load is too small.
• Add more items, redistribute the load manually and then select the spinning
programme.
The machine is fitted with a type of motor which makes an unusual noise com-
pared with other traditional motors. This new motor ensures a softer start and
more even distribution of the laundry in the drum when spinning, as well as
increased stability of the machine.
The machine makes an unusual
noise:
Machines based on modern technology operate very economically using very
little water without affecting performance.
No water is visible in the drum:
If you are unable to identify or solve the problem, contact
our service centre. Before telephoning, make a note of the
model, serial number and purchase date of your machine:
the Service Centre will require this information.
Mod. ... ... ...
Prod. No. ... ... ...
Ser. No. ... ... ...
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
Dimensions
Width
Height
Depth
60 cm
85 cm
60 cm
Electrical connection
Voltage - Overall power - Fuse
Information on the electrical connection is given on the rating plate, on the
inner edge of the appliance door.
Water supply pressure
Minimum
Maximum
0,05 MPa
0,8 MPa
Maximum Load
Spin Speed
Cotton
7 kg
Maximum
1400 rpm
Consumption values
Programme
Energy consumption
Water consumption
(litre)1)
Programme duration
(Minutes)1)
(KWh)1)
White Cottons 90 °C
Cottons 60 °C
2.10
65
60
60
54
63
55
145
120
120
85
1.40
Cottons 40 °C
0.77
Synthetics 40 °C
Delicates 40 °C
0.60
0.60
70
Wool/ Handwash 30 °C
0.25
55
1) The consumption information shown in this chart is indicative. It can vary depending on the quantity and the type of laundry, on the
temperature of the water supply and on the ambient temperature.
Standard programmes for the Energy Label consumption
values
The cotton 60 °C economy and cotton 40 °C economy are
the standard cotton programmes for normally soiled cot-
ton laundry. They are suitable to clean normally soiled
cotton laundry and they are the most efficient programmes
in terms of combined energy and water consumption for
washing that type of cotton laundry.
They agree with EN60456.
The actual water temperature may differ from the de-
clared cycle temperature.
Care and cleaning
tions. This will help to prevent the formation of lime de-
posits.
Warning! You must DISCONNECT the appliance
from the electricity supply, before you can carry out
any cleaning or maintenance work.
External cleaning
Clean the exterior cabinet of the appliance with soap and
water only, and then dry thoroughly.
Descaling
The water we use normally contains lime. It is a good idea
to periodically use a water softening powder in the ma-
chine. Do this separately from any laundry washing, and
according to the softening powder manufacturer's instruc-
Cleaning the dispenser drawer
The washing powder and additive dispenser drawer
should be cleaned regularly.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Remove the drawer by
pressing the catch down- part of the additive com-
wards and by pulling it
out. Flush it out under a
tap, to remove any traces
of accumulated powder.
To aid cleaning, the top
Open the pump door.
Put a container below the recess of the drain pump to
collect the water that flows out.
partment should be re-
moved.
Cleaning the drawer recess
Having removed the draw-
er, use a small brush to
clean the recess, ensuring
that all washing powder
residue is removed from
the upper and lower part of
the recess.
Press the two levers and pull forward the drainage duct
to let the water flow out.
Replace the drawer and run the rinse programme with-
out any clothes in the drum.
Cleaning the pump
The pump should be inspected regularly and particularly
if:
• the appliance does not empty and/or spin;
• the appliance makes an unusual noise during draining
due to objects such as safety pins, coins etc. blocking
the pump;
When the container is full of water, put the drainage
duct back again and empty the container. Do steps 3
and 4 again and again until no more water flows out
from the drain pump.
• a problem with water draining is detected (see chapter
“What to do if...” for more details).
2
1
Warning!
Disconnect the mains plug from the mains socket.
1.
2. Do not remove the filter while the appliance oper-
ates. Do not clean the drain pump if the water in the
appliance is hot. The water must be cold before you
clean the drain pump.
Pull back the drainage duct.
Unscrew the filter and remove it.
Proceed as follows:
17
Download from Www.Somanuals.com. All Manuals Search And Download.
empty. When refitting the pump cover, ensure it is
securely re-tightened so as to stop leaks and young
children being able to remove it.
Cleaning the water inlet filters
Important! If the appliance doesn't fill, takes long to fill
with water, the starting button blinks yellow or the display
(if available) shows the relevant alarm (see chapter "What
to do if..." for more details), check if the water inlet filters
are blocked .
Remove fluff and objects from the pump.
To clean the water inlet filters:
• Turn off the water tap.
• Unscrew the hose from
the tap.
• Clean the filter in the
hose with a stiff brush.
Make sure that the impeller of the pump can turn. If this
does not occur, contact the service centre.
• Screw the hose back onto the tap. Make sure the
connection is tight.
1
2
Clean the filter under the water tap and put it back in the
pump into the special guides.
Make sure that you tighten correctly the filter to prevent
leakages.
• Unscrew the hose from the machine. Keep a rag
nearby because some water may flow.
• Clean the filter in the valve with a stiff brush or with
the piece of cloth.
35°
45°
Close the pump door.
Caution! When the appliance is in use and
depending on the programme selected there can be
hot water in the pump.
Never remove the pump cover during a wash cycle, always
wait until the appliance has finished the cycle, and is
• Screw the hose back to the machine and make sure
the connection is tight.
• Turn on the water tap.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
1. pull out the plug from the power socket;
2. close the water tap;
3. if necessary, wait until the water has cooled down;
4. open the pump door;
5. place a container on the floor below the recess of the
drain pump;
Frost precautions
If the machine is installed in a place where the tempera-
ture could drop below 0°C, remove the remaining water
from the inlet hose and the drain pump.
1. disconnect the mains plug from the mains socket.
2. close the water tap
3. unscrew the water inlet hose from the tap;
4. put the two ends of the inlet hose in a container and
let the water flow out of the hose.
5. empty the drain pump as described in the ‘Emergen-
cy emptying out’ section.
6. press the two levers and pull forward the drainage
duct to let the water flow out;
7. when the container is full of water, put the drainage
duct back again and empty the container;
repeat this operation until water stops flowing out;
8. if necessary clean the pump (refer to the section
‘Cleaning the pump’ );
6. when the drain pump is empty, install the water inlet
hose again.
9. close the drain pump door.
When you drain the water with the emergency drain proce-
dure, you must activate again the drain system:
1. Put 2 litres of water in the main wash compartment
of the detergent dispenser.
2. Start the programme to drain the water.
Warning!
Make sure that the temperature is more than 0 °C before
you use the appliance again.
The manufacturer is not responsible for damages caused
by low temperatures.
Emergency emptying out
If the appliance cannot drain the water, proceed as follows
to empty out the machine:
Installation
Unpacking
All transit bolts and packing must be removed before us-
ing the appliance.
You are advised to keep all transit devices so that they can
be refitted if the machine ever has to be transported again.
Unscrew the three bolts.
Slide out the relevant plas-
tic spacers.
After removing all the
packaging, carefully lay
Remove the power supply
cable and the hoses from
machine on it's back to re- the hose holders on the
move the polystyrene base rear of the appliance.
from the bottom.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Water inlet
Warning! This appliance must be connected to a
cold water supply
Caution! Before connecting up the appliance to new
pipework or to pipework that has not been used for
some time, run off a reasonable amount of water to flush
out any debris that may have collected
Open the porthole and re- Fill the smaller upper hole
Caution! Do not use the hose from your previous
appliance to connect to water supply.
move the polystyrene
block fitted on the door
seal.
and the two large ones
with the corresponding
plastic plug caps supplied
in the bag containing the
instruction booklet.
Connect the hose to a tap
with a 3/4” thread. Always
use the hose supplied with
the appliance.
Positioning
Install the machine on a flat hard floor. Make sure that air
circulation around the machine is not impeded by carpets,
rugs etc. Check that the machine does not touch the wall
or other kitchen units. Level the washing machine by rais-
ing or lowering the feet. The feet may be tight to adjust as
they incorporate a self locking nut, but the machine MUST
be level and stable.
Any necessary adjustment can be made with a spanner.
Accurate levelling prevents vibration, noise and displace-
ment of the machine during operation. Never place card-
board, wood or similar materials under the machine to
compensate for any unevenness in the floor.
35°
45°
The other end of the inlet hose which connects to the
appliance can be turned as showed in the picture.
Do not place the inlet hose downwards. Angle the hose
to the left or right depending on the position of your
water tap. Set the hose correctly by loosening the ring
nut. After positioning the inlet hose, be sure to tighten
the ring nut again to prevent leaks.
If necessary, check the
setting with a spirit level.
Caution! The inlet hose must not be lengthened. If it
is too short and you do not wish to move the tap,
you will have to purchase a new, longer hose specially
designed for this type of use.
Rubber feet kit
Available from your authorized dealer.
The rubber feet are particularly recommended on floating,
slippery and wooden floors.
Water drainage
The end of the drain hose can be positioned in three ways:
Mount the rubber feet to prevent vibration, noises and dis-
placement of the appliance during operation.
Read carefully the instructions supplied with the kit.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooked over the edge of a
sink using the plastic hose
guide supplied with the
machine.
In a sink drain pipe branch. This branch must be above
the trap so that the bend is at least 60 cm above the
ground.
Directly into a drain pipe at a height of not less than 60
cm and not more than 90 cm. The end of the drain hose
must always be ventilated, i.e. the inside diameter of the
drain pipe must be larger than the outside diameter of
the drain hose. The drain hose must not be kinked.
In this case, make sure the end cannot come unhooked
when the machine is emptying. This could be done by
tying it to the tap with a piece of string or attaching it to
the wall.
Electrical connection
Information on the electrical connection is given on the
rating plate on the inner edge of the appliance door.
Check that your domestic electrical installation can take
the maximum load required, also taking into account any
other appliances in use.
Caution! The power supply cable must be easily
accessible after installing the machine.
Caution! Should the appliance power supply cable
need to be replaced, this must be carried out by a
Service Centre.
Caution! Connect the machine to an earthed socket.
Caution! The manufacturer does not accept any
responsibility for damage or injury through failure
to comply with the above safety precaution.
Environment concerns
your local council, your household waste disposal service
or the shop where you purchased the product.
The symbol
on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed
information about recycling of this product, please contact
Packaging materials
The materials marked with the symbol
>PE<=polyethylene
>PS<=polystyrene
>PP<=polypropylene
are recyclable.
This means that they can be recycled by disposing of
them properly in appropriate collection containers.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
• With adequate pre-treatment, stains and limited soiling
can be removed; the laundry can then be washed at a
lower temperature.
Ecological hints
To save water, energy and to help protect the environment,
we recommend that you follow these tips:
• Measure out detergent according to the water hard-
ness, the degree of soiling and the quantity of laundry
being washed.
• Normally soiled laundry may be washed without pre-
washing in order to save detergent, water and time (the
environment is protected too!).
• The machine works more economically if it is fully loa-
ded.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|