INSTRUCTION BOOKLET
COOKER HOOD
ZHT 610
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INFORMATION
These warnings are provided in the interests of your safety. Ensure that you understand them all before
installing or using this appliance. Your safety is of paramount importance. If you are unsure about any of
the meanings of these warnings contact the Customer Care Department.
Installation
Child Safety
•
•
Any installation work must be undertaken by a
qualified electrician or a competent person.
•
This appliance is designed to be operated by adults.
Children should not be allowed to tamper with the
controls or play with the appliance.
This hood must be installed in accordance with the
installation instructions and all measurements must
be adhered to.
During Use
•
If the cooker hood is installed for use above a gas
appliance then the provision for ventilation must be
in accordance with the Gas Safety Codes of Practice
BS.6172, BS.5440 and BS.6891 (Natural Gas) and
BS.5482 (LP Gas) 1994, the Gas Safety (Installation
& Use) Regulations, the Building Regulations issued
by the Department of the Environment, the Building
standards (Scotland) (Consolidated) Regulations
issued by the Scottish Development Department.
•
•
This product is for domestic use only.
Never leave frying pans unattended during use as
over-heated fats and oils might catch fire.
•
•
Never do flambé cooking under this cooker hood.
Do not leave naked flames under the hood.
•
The fan motor of this cooker hood incorporates a cut-
out device which will operate if the cooker hood is
installed below the minimum height recommended
under section ‘Clearance Height’, or if the motor
becomes overheated. If the cut-out device is
activated, switch off the fan motor and allow the
cooker hood to cool. The cut-out device will reset
itself when the fan motor has cooled significantly.
Maintenance and Service
•
•
This appliance can be a hazard if the synthetic paper
and charcoal filters are not replaced as
recommended.
Under no circumstances should you attempt to repair
the appliance yourself. Repairs carried out by
inexperienced persons may cause injury or more
serious malfunction. Refer to your local Zanussi
Service Force Centre.Always insist on genuine spare
parts.
•
•
•
It is dangerous to alter the specifications or modify
this product in any way.
When installed between adjoining wall cabinets the
wall cabinets must not overhang the hob.
If the room where the hood is to be used contains a
fuel burning appliance such as a central heating boiler
then its flue must be of the room sealed or balanced
flue type.
•
•
If other types of flue or appliances are fitted ensure
that there is an adequate supply of air to the room.
The ducting system for this appliance must not be
connected to any existing ventilation system which
is being used for any other purpose.
•
Do not install above a cooker with a high level grill.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
YOUR APPLIANCE
OPERATING INSTRUCTIONS
This cooker hood is designed to extract
unpleasant odours from the kitchen, it will not
extract steam.
To obtain the best performance it is advisable
to switch on the hood a few minutes before
you start cooking and leave it running for
approximately 15 minutes after finishing.
The cooker hood controls are located on the
right hand side, in the front fascia panel above
the glass visor.
The Controls
Fan ON/OFF/Speed Control
Position 0 - Off
Position 1 - Low
Position 2 - Normal
Position 3 - Boost
Light ON/OFF control
0 - Off
0
1
0
1
2
3
1 - On
To Operate
Select the required fan speed and light
if required.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
The appliance can be installed to recirculate
or extract contaminated air. The cooker hood
is more effective when used in the extraction
mode.
4
0
1
_
13
L2
Recirculation
The cooker hood is supplied specified for use
in the recirculation mode with the charcoal
filter fitted.
In the recirculation mode contaminated air is
passed through the charcoal filter to be
purified and recirculated into the kitchen
through a recirculation grille.
Extraction
In the extraction mode the contaminated air
enters the cooker hood, passes through the
grease filter and out through the ducting to the
atmosphere.
When the ducting position is selected
the charcoal filter is not required.
Never do flambé cooking under this
cooker hood.
Take extra care when frying and never
leave frying pans unattended during use
as over-heated fats and oils might catch fire.
Do not leave naked flames under the
cooker hood.
Ensure the visor is open when using the
hob even if the fan on the hood is not
switched on.
Ensure heating areas on your hob are
covered with pots and pans when using
the hob and cooker hood simultaneously.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
MAINTENANCE AND CLEANING
Before carrying out any maintenance or
cleaning isolate the cooker hood from the
mains supply.
The cooker hood must be kept clean, a
build up of grease or fat can be a fire hazard.
External Cleaning
Wipe the cooker hood frequently with warm
soapy water using a mild detergent.
Always wear protective gloves when
cleaning the hood.
Never use scouring pads or abrasive
cleaners.
Never use excessive amounts of water
when cleaning particularly around the
control panel.
Charcoal Filter
The charcoal filters cannot be cleaned. The
filter should be replaced at least every three
months or more frequently if the hood is used
more than three hours per day.
To Remove/Replace the Charcoal
Filter
1.
2.
Remove the metal inlet grille.
Carefully twist the plastic disc anticlockwise, while
holding the charcoal filter secrurely.
3.
Clean the metal inlet grille and motor support
before replacing the charcoal filter.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Synthetic Paper Grease Filter
The filter has saturation indicators, which are small
squares made from a series of dots. When the white
paper inside the squares becomes saturated with grease
the coloured dots start to run and spread across the
paper, indicating that the filter has reached saturation
point and must be replaced.
The synthetic paper grease filter cannot be
cleaned.
It must not be washed.
To Replace the Synthetic Paper
Grease Filter
1.
2.
Open the glass visor.
Press inwardly on the two slide catches and the
grille will open from the front.
3.
Slide the right edge of the grille forward until it
clears the guide and then unhook the left hinge
pin.
40
1_
13L
2
4.
5.
Carefully ease out the metal wire retaining clips.
Clean the metal grille and clips before replacing
the filter.
Handle the wire clips with care and keep away
from children as they have sharp points.
This appliance can be a fire hazard if the
grease and charcoal filters are not cleaned and
replaced as recommended.
Changing the Light Bulb
If a lamp fails to function check that the bulb is screwed
into the holder.
If bulb failure has occurred then it should be replaced
with a 220-240V 40W clear cylindrical shape bulb with a
small E14 screw thread.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
SOMETHING NOT WORKING
If, having followed these instructions carefully, your cooker hood fails to work properly please carry out
the following checks.
Symptom
Solution
The cooker hood will not start
•
•
Check the hood is connected to the electricity supply.
Check that the fan speed control is set to 1, 2 or 3.
The cooker hood is not working effectively
•
•
•
The fan speed is set high enough for the task.
The grease filter is clean.
The kitchen is adequately vented to allow the entry
of fresh air.
•
•
If set up for recirculation, check that the charcoal
filter is still effective.
If set up for extraction, check that the ducting and
outlets are not blocked.
The cooker hood has switched off during
operation
•
•
The safety cut-out device has been tripped.
Turn off the hob and then wait for the device to reset.
If after all these checks, the problem persists,
contact your local Service Force Centre,
quoting the model and serial number.
In-guarantee customers should ensure
that the above checks have been made as
the engineer will make a charge if the fault
is not a mechanical or electrical
breakdown.
Please note that it will be necessary to
provide proof of purchase for any
in-guarantee service calls.
SERVICE AND SPARE PARTS
If you require an engineer or wish to purchase spare
For general assistance with your appliance or for
information on Zanussi products please contact our
Customer Care Department.
parts contact your local Service Force Centre by
telephoning:
Customer Care Department,
Zanussi
08705 929929
55-77 High Street
Slough
Your telephone call will be routed to your local
Service Force Centre. The addresses are listed at the
back of the book.
Berkshire
SL1 1DZ
Tel: 08705 727 727(*)
*calls to this number may be recorded for training
purposes.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
PEACE OF MIND FOR TWENTY FOUR MONTHS
STANDARD GUARANTEE CONDITIONS
We, Zanussi, undertake that if within twenty four months of the date of the purchase this Zanussi built-in appliance
or any part there of is proved to be defective by reason only of faulty workmanship or materials, the company will, at
our option repair or replace the same FREE OF ANY CHARGE for labour, materials or carriage on condition that:
•
•
The appliance has been correctly installed and used only on the electrical supply stated on the rating plate.
The appliance has been used for normal domestic purposes only, and in accordance with the manufacturer’s
operating and maintenance instructions.
•
The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any person not
authorised by us.
•
•
All service work under this guarantee must be undertaken by Zanussi Service Force Centre.
Any appliance or defective part replaced shall become the property of this company.
Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these hours
in which case a premium will be charged.
EXCLUSIONS
This Guarantee does not cover:
Damage or calls resulting from transportation, improper use or neglect, the replacement of any lilght bulbs or removable
parts of glass or plastic.
•
•
•
Costs incurred for calls to put right appliances improperly installed or calls to appliances outside the United
Kingdom.
Appliances found to be in use within a commercial environment, plus those which are the subject of rental
agreements.
Products of Zanussi manufacture which are not marked by Zanussi.
This guarantee is in addition to your statutory and legal rights.
ZANUSSI EUROPEAN GUARANTEE
If you should move to another country within Europe then your guarantee moves with you to your new home subject
to the following qualifications:
•
•
The guarantee starts from the date you first purchased your product.
The guarantee is for the same period and to the same extent for labour and parts as exists in the new country of
use for this brand or range of products.
•
•
•
This guarantee relates to you and cannot be transferred to another user.
Your new home is within the European Community (EC) or European Free Trade Area.
The product is installed and used in accordance with our instructions and is only used domestically, i.e. a normal
household.
Before you move please contact your nearest Customer Care Centre, listed below, to give them details of
your new home. They will then ensure that the local Service Organisation is aware of your move and able to
look after you and your appliances.
France
Germany
Italy
Senlis
+33 (0)3 44 62 29 99
+49 (0)911 323 2600
+39 (0)1678 47053
+46 (0)8 738 79 50
+44 (0)1753 219 897
Nurnberg
Pordenone
Stockholm
Slough
Sweden
UK
Download from Www.Somanuals.com. All Manuals Search And Download.
9
INSTALLATION INSTRUCTIONS
It is dangerous to alter the specifications or attempt to modify this product in any way.
Technical Information
DIMENSIONS
HEIGHT:
15 cm
59,8 cm
45 cm
WIDTH:
DEPTH - VISOR CLOSED:
DEPTH - VISOR OPEN:
50,2 cm
WEIGHT
GROSS:
NET:
7,5 kg
6,5 kg
ELECTRICAL SUPPLY:
Voltage
220-240 V 50 Hz
190 W
POWER CONSUMPTION:
FAN MOTOR:
110 W
LAMPS 2 x 40W
80 W
SUITABLE FOR INSTALLATION
ABOVE:
OVER ELECTRIC HOB:
OVER GAS HOB:
7KW (max)
10KW (max)
SLOT-IN GAS COOKER:
SLOT-IN ELECTRIC COOKER:
13.5KW (max)
12.4KW (max)
Note: CE Marking certifies that this appliance complies with the requirements
laid down in EEC directive 89:336. (Electromagnetic compatibility) and
subsequent modifications and Low Voltage directive 72/23/E.
ELECTRICAL CONNECTIONS
WARNING:DOUBLE INSULATED-DO NOT
EARTH
Electrical Requirements
This appliance is fitted with a 2 core mains
cable and must be permanently connected to
the electricity supply via a double-pole switch
having 3mm minimum contact gap on each
pole. A Switched Fuse Connection Unit to
BS.1363 Part 4,fitted with a 3 A fuse is a
recommended mains supply connection
accessory to ensure compliance with the Safety
Requirements applicable to fixed wiring
instructions.
Any permanent electrical installation must
comply with the latest I.E.E. Regulations and
local Electricity Board regulations. For your own
safety this should be undertaken by a qualified
electrician e.g. your local Electricity Board, or a
contractor who is on the roll of the National
Inspection Council for Electrical Installation
Contracting (NICEIC).
Electrical Connection
This appliance conforms to BS 800: 1988 and
EEC Directive No. 78 308 regarding
suppression of radio and television
interference.
Before connecting to the mains supply ensure
that the mains voltage corresponds to the
voltage on the rating plate inside the cooker
hood.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
INSTALLING THE COOKER HOOD
Please ensure that when the appliance is installed it is
easily accessible to an engineer in the event of a
breakdown.
All installations must comply with the local
authorities requirements for the discharge of
exhaust air.
Incorrect installation may affect the safety of
this cooker hood.
Installation Requirements
Before installation check the wall to which the
cooker hood is to be fitted for electric cables,
water pipes or gas.
If it is necessary to fix the hood to a hollow construction
plaster or partition board structure then it should be
sufficiently reinforced to be quite rigid in the area of the
cooker hood mounting brackets, and the appropriate rawl
plugs used for this type of fixing (not supplied).
Ducting
The ducting must be fire retardant 100mm (4ins) in
diameter and the length should be no more than:
•
•
3 metres with one 90° bend
2 metres with two 90° bends
Bends of more than 90° will reduce the
efficiency of the hood and reduce the airflow.
Clearance Height
The cooker hood is designed to be fitted over a cooking
appliance at the clearance heights stated, providing the
maximum output of the appliance beneath does not
exceed the maximums quoted in the Technical
Specifications.
If the output of the appliance below the cooker hood
exceeds the maximum outputs quoted, please refer to
the cooker manufacturer’s installation instructions.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Clearance Height
A minimum clearance height of 650mm (251/2”) is
required when installed above a built-in electric hob, or
700mm (271/2”) when installed above a built-in gas hob.
A minimum clearance height of 685mm (27”) is required
when installed above a slot-in electric oven, or 787mm
(30 1/2”) when installed above a slot-in gas oven.
Hob
When installed between adjoining wall cabinets, the wall
cabinets must not overhang the hob and the distance
between the underside of the cabinet and the worktop
must be 450mm. If the height of the wall cabinet is less
than 450mm, a gap of 50mm must be maintained either
side of the hob.
A: Built-in Electric Hob:
B: Built-in Gas hob:
650mm minimum clearance
700mm minimum clearance
C: Slot-in Electric Cooker: 685mm minimum clearance
D: Slot-in Gas Cooker: 787mm minimum clearance
This cooker hood must not be installed above
a cooking appliance with a high level grill.
Unpacking
The fittings supplied to install this cooker
hood can be found with the instruction book
inside the packaging and consists of the following:
Ducting spigot
Blanking plate
Wall / suspended fixing template
Wall Fitting
The cooker hood is fitted to the wall using the
keyhole slots in the back of the hood.
1.
Mark the position on the wall for the two
Ø 8mm dia screw holes (A) as illustrated in the
drawing opposite at 568mm.
2.
3.
Check that the hole distances are correct and
are level using a spirit level.
At this stage it is important to allow 25mm (1”)
clear space above the cooker hood to enable it
to be hooked onto the screws and for subsequent
removal for decorating or servicing.
4.
Insert the screws and tighten to a distance of
5mm.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Venting
The hood is more effective when used in the extraction
setting (ducted to the outside).
Venting kits maybe purchased through your retailer or
DIY store, and must be ducted to an outside vent of
100mm (4”) minimum.
The ducting used must be manufactured
from fire retardant material which should
conform to the relevant British Standard
or DIN4102-B1.
When the hood is ducted externally the
charcoal filter must be removed and the slider
control must be in the ducting position.
To Fit the Ducting
1.
Fit the ducting spigot and blanking plate, by
aligning the interlocking lugs on the fittings, with
the recesses in the aperture.
2.
3.
Insert and turn anti-clockwise to lock spigot and
blanking plate into position.
Remove the charcoal filter and ensure the slider
control is in the ducting position.
To Remove the Charcoal Filter
1.
2.
Remove the metal inlet grille.
Carefully twist the plastic disc anticlockwise, while
holding the charcoal filter secrurely.
3.
Clean the metal inlet grille and motor support
before replacing the charcoal filter.
Recirculation
The charcoal filter must be fitted for recirculation and
the slider control must be in the recirculation position.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Wall Cabinet Fitting
Before fitting the cooker hood beneath any type of wall
cabinet ensure it is firmly fixed to the wall in accordance
with the manufacturers instructions.
1.
Use the paper template provided to mark the hole
positions on the underside of the cabinet. Ensure
the front edges of the template are aligned with
the front edge of the cabinet carcase.
2.
3.
Check the distances are correct with a tape
measure as stated on the template. The four
holes are 5mm (1/4”) diameter.
If the ducting spigot is being used, cut a circular
hole, using a pad saw or similar cutter.
Fitting the Cooker Hood to the Wall
1.
2.
3.
Lift the hood squarely to the wall slightly higher
than the screws (not supplied).
Lower the cooker hood until the cooker hood
locates onto the two screws.
Ensure that the cooker hood is correctly located
before letting go.
To Level the Cooker Hood
1.
2.
Remove the lower grille by pressing inwardly on
the two slide catches located towards either side
of the grille towards the front. The grille will open
from the front.
Slide the right edge of the grille forward until it
clears the guide and then unhook the left hinge
pin.
3.
4.
Support the grille when removing it from the
guides carefully.
The two levelling screws will be visible towards
either end of the back panel.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
5.
6.
7.
Turn the screws clockwise to lift the front edge of
the hood and use a spirit level to check the hood
is positioned at right angles to the wall before
fitting the security system.
The wall brackets have two studs and when the
cooker hood is hung onto the brackets the studs
project trought the holes above the levelling
screws.
When the hood is level fit the two shake proof
washers and nuts supplied to fully secure the
cooker hood.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
19
© Electrolux Household Appliances Limited 2001
Download from Www.Somanuals.com. All Manuals Search And Download.
4329516 04 - 010905
|