UseAndCare
G
U
I
D
E
Table of Contents
(complete) ................... 2
A Note to You................. 3
Understanding
Safety........................... 4-5
Parts and Features ........ 6
Checking Your Vent ...... 7
Operating Your
Washer ........................... 9
Operating Your
Dryer ............................. 15
Laundry Tips ................ 20
Caring for Your
Washer/Dryer ............... 29
Troubleshooting .......... 33
Requesting
Assistance
or Service ..................... 37
Warranty ....................... 40
1-800-253-1301
Call our Consumer Assistance Center
with questions or comments.
LARGE CAPACITY
AUTOMATIC COMBO WASHER/DRYER
PART NO. 3406874
Download from Www.Somanuals.com. All Manuals Search And Download.
A Note to You
Thank you for buying this appliance.
You have purchased a quality world-class appliance. To ensure that you enjoy years of
trouble-free operation, we developed this Use and Care Guide. It contains valuable information
about how to operate and maintain your washer properly and safely. Please read it carefully.
Also, please complete and mail in the Ownership Registration Card provided with your
appliance. The card helps us notify you about any new information on your appliance.
Please record your model’s information.
Model Number __________________________
Serial Number __________________________
Purchase Date __________________________
Dealer Name ___________________________
Dealer Address _________________________
Dealer Phone ___________________________
Whenever you call to request service on
your appliance, you need to know your
complete model number and serial number.
You can find this information on the model
and serial number label (see diagram in the
“Parts and Features” section for location
of label).
Please also record the purchase date of
your appliance and your dealer’s name,
address, and telephone number.
Keep this book and the sales slip together in a safe place for future reference.
Our Consumer Assistance Center
number is toll-free from anywhere
1-800-253-1301
in the U.S.A.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding Safety
Your safety and the safety of others is very important.
We have provided many important safety messages in this manual and on your
appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to hazards that can kill or hurt you and others.
All safety messages will be preceded by the safety alert symbol and the
word “DANGER” or “WARNING.” These words mean:
You will be killed or seriously injured
if you don’t follow instructions.
wDANGER
You can be killed or seriously injured
if you don’t follow instructions.
wWARNING
All safety messages will identify the hazard, tell you how to reduce the chance of injury,
and tell you what can happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injury to
persons when using the washer/dryer, follow basic precautions, including
the following:
•Read all instructions before using •Under certain conditions,
the washer/dryer.
hydrogen gas may be produced in
a hot water system that has not
been used for 2 weeks or more.
HYDROGEN GAS IS EXPLOSIVE.
If the hot water system has not
been used for such a period,
before using the washing machine,
turn on all hot water faucets and let
the water flow from each for
•Do not wash or dry articles that
have been previously cleaned
in, washed in, soaked in, or
spotted with gasoline, dry-clean-
ing solvents, other flammable,
or explosive substances as they
give off vapors that could ignite
or explode.
several minutes. This will release
any accumulated hydrogen gas.
As the gas is flammable, do not
smoke or use an open flame during
this time.
•Do not add gasoline, dry-clean-
ing solvents, or other flammable,
or explosive substances to the
wash water. These substances
give off vapors that could ignite
or explode.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
UNDERSTANDING SAFETY
•Do not allow children to play on
or in the washer/dryer. Close
supervision of children is neces-
sary when the washer/dryer is
used near children.
•Before the washer/dryer is re-
moved from service or discarded,
remove the doors to the washing/
drying compartments.
•Do not use fabric softeners or
products to eliminate static unless
recommended by the manufacturer
of the fabric softener or product.
•Do not use heat to dry articles
containing foam rubber or similarly
textured rubber-like materials.
•Clean dryer lint screen before or
after each load.
•Do not reach into the washer/
dryer if the tub, agitator, or drum
is moving.
•Do not install or store the washer/
dryer where it will be exposed to
the weather.
•Keep area around the dryer
exhaust opening and adjacent
surrounding areas free from the
accumulation of lint, dust, and dirt.
•The interior of the machine and
dryer exhaust vent should be
cleaned periodically by qualified
service personnel.
•Do not tamper with controls.
•Do not repair or replace any part
of the washer/dryer or attempt
any servicing unless specifically
recommended in this Use and
Care Guide or in published
user-repair instructions that you
understand and have the skills to
carry out.
•See Installation Instructions for
grounding requirements.
– SAVE THESE INSTRUCTIONS –
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts and Features
The parts and features of your washer/dryer are illustrated on this page. Become familiar with
all parts and features before using your washer/dryer. Page references are included next to
some features. Refer to those pages for more information about the features.
Spin Off
10
Rinse
Normal
6
Permanent
Press
Warm
Cold
10
14
18
End of Cycle Signal
Dryer
Cold
Cold
Cool
Hot
Cold
Small
Dryer controls
Down
Pause
Medium
Super
Wash
Automatic
Cool
Less Down
Dry
Off
On
O
ff
60
Ex-Small
Off
Perm Press/
nse
50
Large
Spin
Heavy
Timed Drying
(High Heat)
Pull Start
Push Stop
Very
Dry
40
n
(High Heat)
4
ff
30 Damp Dry
Pre-Wash
Soak
Energy Preferred
Automatic Setting
6
Tumble
Press
Off
Cool
20
Wash
Rinse
Temperature
20
Rinse
Delicate
Off
Spin
Down
Less
Dry
(pp. 15-17)
Cool
Heavy Duty
Large Capacity
Down
Load Size
Automatic
Washer
Push To Start
Dryer
Delicate
Very
Dry
Off
(Low Heat)
20
10
Off
Fluff Air
Washer controls
(pp. 9-12)
Dryer drum
Model and serial
number label
Lint screen
(pp. 29-30)
Optional
exhaust
outlet
Agitator
Basket
Tub
Additional features your
washer/dryer has:
Self-cleaning lint filter (p. 13)
Automatic dryness control (Auto Sense Dry) (p. 17)
Selectable end of cycle signal (dryer) (p. 19)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking Your Vent
Your washer/dryer must be properly installed and vented to achieve maximum drying
efficiency. Install your washer/dryer in a well-ventilated room where the temperature is always
above 45°F (7°C). Also make sure that your washer/dryer is leveled. Refer to your Installation
Instructions for more information.
wWARNING
Fire Hazard
Use a heavy metal vent.
Do not use a plastic vent.
Do not use a metal foil vent.
Failure to follow these instructions can result in death or fire.
Venting
If the washer/dryer is not properly installed
and vented, it will not be covered under the
warranty.
NOTE: Service calls caused by improper
venting will be paid for by the customer,
whether it was a paid installation or self-
installed. For paid installation, call the
company that installed the vent for
adjustment.
1. Do not use plastic vent or flexible metal
foil vent. Use four-inch heavy metal or
flexible metal vent. Do not kink or crush
flexible metal vent. It must be completely
extended to allow adequate exhaust air to
flow. Check vent after installation. Refer
to your Installation Instructions for proper
length requirements of vent.
4"
2. Use a 4" exhaust hood. Smaller hoods
increase drying times.
4"
4"
continued on next page
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CHECKING YOUR VENT
3. The exhaust vent can be routed up, down,
left, right, or straight out the back of the
dryer. Space requirements are listed in
your Installation Instructions.
4. Use the straightest path possible when
routing the exhaust vent. Avoid 90° turns,
if possible. Allow room when using elbows
or making turns. Bend vent gradually to
avoid kinking.
5. Use duct tape to seal all joints. Do not
use screws to secure vent. Lint may catch
on screws.
6. Clean exhaust vent periodically, depend-
ing on use, but at least every 2 years, or
when installing your washer/dryer in a
new location.
• Disconnect vent from the washer/dryer
and clean one section at a time until
you reach the exhaust hood.
• Use the hose attachment on your
vacuum, or a pole or wire with a feather
duster or rag attached, to clean out lint.
• Be sure the flapper on the outside end
of vent moves freely.
• When cleaning is complete, be sure
to follow the Installation Instructions
supplied with your washer/dryer for
final product check.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Your Washer
To obtain the best washing results, you must operate your washer properly. This section
gives you this important information.
wWARNING
Explosion Hazard
Never place items in the washer that
are dampened with gasoline or other
flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever
had any type of oil on it (including
cooking oils).
Doing so can result in death,
explosion, or fire.
Starting your washer
1. Add measured detergent to the washer.
Then place a sorted load of clothes in
the washer.
• Sort and load clothes as described in
the “Laundry Tips” section.
• If desired, you may also add color safe
bleach.
2. Close the washer lid.
3. Select a water level.
SMALL
MEDIUM
Turn the Water Level selector to the
setting that corresponds with the size
of the wash load and the type of fabric
being washed.
EX-SMALL
LARGE
• To change the water level setting after
the washer has started, move the
selector to the desired new setting.
WATER LEVEL
WASHER
• See the “Laundry Tips” section for
loading tips.
continued on next page
9
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING YOUR WASHER
4. Select a wash-rinse temperature with
the Temperature selector. Match the
water temperature with the type of
fabric and soils being washed. See
“Water guidelines” in the “Laundry Tips”
section.
• Three wash-rinse temperatures are
available: Cold-Cold, Warm-Cold, and
Hot-Cold.
5. Push in and turn the Cycle Control
Knob clockwise. Stop when the indica-
tor on the outer ring points to the
number in the wash cycle you want.
• The numbers are minutes of wash time.
• The cycles are described in “Selecting
a cycle and time.”
6. Pull out Cycle Control Knob to start
washer.
7. (OPTIONAL STEP) If desired, add
liquid chlorine bleach AFTER washer
starts agitating. See “Adding liquid
chlorine bleach.”
8. (OPTIONAL STEP) If desired, add
measured and diluted fabric softener
to the final rinse cycle. See “Adding
liquid fabric softener.”
Stopping/restarting your washer
If necessary, you can stop your washer
during a cycle to add more clothes.
• To stop the washer at any time, push in
the Cycle Control Knob.
f
• To restart the washer, close the lid (if
open) and pull out the Cycle Control Knob.
f
10
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING YOUR WASHER
Selecting a cycle and time
Use the information in this section to help
you make the best cycle selections for your
wash loads. Each cycle is designed for
different types of fabrics and soil levels.
Delicates cycle
The Delicates cycle features a reduced
agitation speed for gentle soil removal. Low
spin speeds reduce wrinkling.
• The washer pauses briefly throughout
each cycle. These pauses are normal for
washer operation.
• Use 6 minutes of wash time to clean
delicate items and washable knits that are
lightly soiled.
• To help you understand what happens
during a wash cycle, see “What happens
in each cycle.”
Soak cycle
The Soak cycle features brief periods of agi-
tation and soak time to help remove heavy
soils and stains that need pretreatment.
Normal cycle
The Normal cycle features the Gentle Wash
system and high spin speeds to shorten
drying time.
• Use warm water when soaking laundry.
(Hot water can set stains.) See “Removing
stains” for stain removal information.
• Use 14 minutes of wash time to clean
sturdily-constructed cotton and linen
fabrics that are heavily soiled.
• Use 10 minutes of wash time to clean
cotton and linen fabrics that are lightly to
moderately soiled.
• Use the amount of detergent or presoak
additive recommended by manufacturer.
• After the 20-minute Soak cycle ends, add
detergent and set a new wash cycle.
• The 4-minute Pre-Wash time features
high-speed agitation to loosen stains.
Once the Pre-Wash period ends, add
detergent and start a new wash cycle.
Permanent Press cycle
The Permanent Press cycle features the
Gentle Wash system, a cool-down rinse,
and low spin speeds to reduce wrinkling.
• Use 10 minutes of wash time to clean
permanent press and some synthetic
fabrics that are moderately soiled.
• Use 6 minutes of wash time to clean
permanent press and some synthetics
that are lightly soiled.
continued on next page
11
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING YOUR WASHER
Extra Wash cycle
The Extra Wash cycle automatically pre-
washes the laundry and advances into the
Normal wash cycle. (The washer does not
need to be reset after the Super Wash
cycle.) Use this 18-minute cycle when
washing heavily soiled loads that need
maximum soil removal.
• For proper cleaning, use double the
amount of detergent recommended for
a wash cycle.
Using Rinse and Spin
When using extra detergent for heavily
soiled clothes, or washing special-care
items, you may want an extra rinse and spin.
1. Push in Cycle Control Knob and turn
clockwise to Rinse, as illustrated.
2. Pull out Cycle Control Knob. The washer
fills to selected load size, agitates, drains,
and spins.
Using Drain and Spin
A drain and spin may help shorten drying
times for some heavy fabrics or special-care
items by removing excess water.
1. Push in Cycle Control Knob and turn
clockwise to Spin, as illustrated.
2. Pull out Cycle Control Knob. The washer
drains and then spins.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING YOUR WASHER
What happens in each cycle
When the Cycle Control Knob is set to a
number and pulled out, the washer fills (to
the selected water level) before agitation and
timing start. The washer begins agitating
immediately after filling; agitation can occur
with the washer lid up or down. After agita-
tion starts, the Cycle Control Knob turns
clockwise until it points to Off and the
cycle ends.
The washer pauses briefly throughout
each cycle. These pauses are normal for
washer operation.
NOTE: A Gentle Wash system helps protect
your fabrics by reducing wash agitation
speed during the last few minutes of wash
agitation in the Normal and Permanent
Press cycles.
WASH
RINSE
Fill
▼
Fill
▼
Rinse
▼
Wash*
▼
*Agitation speed is reduced in the last few
minutes of most cycles. This provides
better fabric care.
Drain-No agitation
▼
Spin-Spray rinse
▼
Drain-No agitation*
▼
*The Permanent Press cycle partially
drains, fills, agitates briefly, and drains.
Spin
▼
Spin
▼
Off
Self-cleaning lint filter
The lint filter at the bottom of the washer
basket cleans itself. During agitation, wash
and rinse water passes over the filter,
separating the lint from the water. The lint is
then spun away from the filter and out of the
system during the spin part of the cycle.
If your washer drains into a tub, remove
any lint collected in the tub or strainer.
Self-cleaning
lint filter
Basket
interior
13
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING YOUR WASHER
Adding liquid chlorine bleach
Always measure liquid chlorine bleach. Do
not guess. Never use more than 1 cup
(250 mL) for a full load. Use less with
lower load size settings. Follow manufac-
turer’s directions for safe use. Use a cup
with a pouring spout to avoid spilling.
• When soaking with chlorine bleach, add
detergent to soak water.
NOTE: Undiluted bleach will damage any
fabric it touches. The damage appears as
rips, holes, tears, or color loss and may not
show up until several washings later.
1. Let the washer fill and begin agitating
the load.
2. Add bleach to wash cycle so it can be
removed in the rinse cycle. Pour bleach
around agitator, not directly on load.
• Follow directions on care labels. Do
not use chlorine bleach on wool, silk,
spandex, acetates, or some flame-
retardant fabrics.
Adding liquid fabric softener
NOTE: Your washer does not come with a
fabric softener dispenser installed.
To order the fabric softener dispenser
(Part# 3350834), contact the store where
you purchased your washer/dryer.
• Always dilute liquid fabric softener with
1⁄2 to 1 cup (125 to 250 mL) warm water.
Undiluted fabric softener can stain fabrics.
• Add diluted fabric softener only in the
final rinse.
• Fabric softener should not be mixed with
other laundry products because greasy
stains may form. If stains form, remove
by wetting the stain and rubbing with liquid
detergent or a bar of soap. Rewash the
stained item.
• Too much fabric softener can make some
items (diapers and towels) nonabsorbent.
If this happens, use less fabric softener or
do not use it every time.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Your Dryer
The information in this section helps you learn to use your dryer efficiently and safely. Refer
to the “Laundry Tips” section for additional information on sorting, loading, and drying most
types of washables.
NOTE: Before using your dryer, wipe the dryer drum with a damp cloth to remove dust from
storing and shipping.
wWARNING
wWARNING
Fire Hazard
Explosion Hazard
No washer can completely
remove oil.
Keep flammable materials and
vapors, such as gasoline, away from
dryer.
Do not dry anything that has ever
had any type of oil on it (including
cooking oils).
Do not dry anything that has ever
had anything flammable on it (even
after washing).
Items containing foam, rubber,
or plastic must be dried on a
clothesline or by using an Air Cycle.
Failure to follow these instructions
can result in death, explosion, or fire.
Failure to follow these instructions
can result in death or fire.
Starting your dryer
1. Load clothes into the dryer and close
the door.
2. Turn the Cycle Control Knob to the
desired cycle and setting.
Use the Energy Preferred
Automatic Setting ( ) to dry
*
most loads. See “Selecting a
cycle and setting” for descrip-
tions of the cycles.
3. Push the Start button.
NOTE: Your dryer stops
automatically when a cycle
ends.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING YOUR DRYER
Stopping/restarting your dryer
OR
You can stop your dryer anytime during
a cycle.
• Turn the Cycle Control Knob to Off.
To stop the dryer, either:
NOTE: The Cycle Control
Off
Knob should point to an Off
area when the dryer is not
• Open the dryer door
in use.
Off
To restart the dryer:
1. Close the dryer door.
2. Select a new cycle, if desired.
3. Push the Start button.
Selecting a cycle and setting
• Overdrying can cause shrinkage, static
Your dryer’s Cycle Control Knob is shown
above. Use the drying guidelines and cycle
descriptions on this and the following pages
for help in selecting the right drying cycles.
cling, and damage to some fabrics.
• See the “Laundry Tips” section for informa-
tion about:
• Always follow care label directions when
they are available.
– sorting clothes for drying
– choosing load sizes
• To dry delicate fabrics, rubber, plastic,
and heat-sensitive fabrics, always use the
No Heat/Fluff cycle or dry these items on
a line or rack.
– using dryer fabric softeners
– drying special-care items
• The last few minutes of all cycles are with-
out heat to make the load easier to handle.
• To help reduce wrinkling, remove the load
from the dryer as soon as tumbling stops.
This is especially important for permanent
press, knits, and synthetic fabrics.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING YOUR DRYER
Cycle Descriptions
Damp Dry Feature
Use this feature to dry items to damp level
or to dry damp items that do not require an
entire drying cycle. Two examples are heavy
cottons, such as jeans, which you do not
want to become stiff, or cotton clothes which
are easier to press when damp.
Auto Sense Dry Cycle(s)
Dry most loads using the Energy Preferred
Automatic Setting ( ). Your Auto Sense Dry
*
cycle(s) shuts off when the selected dryness
is reached. The Cycle Control Knob will not
move until the load is almost dry. After the
cool-down, the Knob automatically turns to
an Off area and tumbling stops.
De-Wrinkle Feature
The De-Wrinkle feature removes wrinkles
from clothes that have been packed in a
suitcase, or from items not removed from
the dryer at the end of a cycle. Put only a
few items in your dryer for best results when
using this cycle. As soon as the dryer stops,
fold or put the items on hangers.
• If the load is drier than you like, select
Less Dry the next time you dry a
similar load.
• If the load is not as dry as you like, com-
plete drying using the Timed Dry cycle.
Select Very Dry the next time you dry a
similar load.
No Heat/Fluff Cycle
Your dryer has both a High Heat cycle (Auto
Sense Dry or Timed Dry) and a Low Heat
cycle (Auto Sense Dry). Refer to the Drying
chart within the “Operating Your Dryer”
section to guide you when making drying
selections.
The No Heat/Fluff cycle has no heat. Use
this unheated cycle to fluff or air dry bed-
ding, plastic tablecloths, foam pillows, etc.
Refer to the Drying chart within the “Operat-
ing Your Dryer” section for more information.
NOTE: The Auto Sense Dry cycles use an
automatic dryness control that senses the
exhaust temperature and determines the
dryness of the load.
Timed Dry Cycle
Your dryer offers High Heat in the Timed Dry
cycle. Use the Timed Dry cycle to complete
drying if some items are damp after using an
Auto Sense Dry cycle. Timed Dry is also
useful for:
• Bulky items and large loads that require a
long drying time.
• Damp drying items; turn the Cycle Control
Knob to 30 minutes or less.
Refer to the Drying chart within the “Operat-
ing Your Dryer” section for Timed Drying
suggestions.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING YOUR DRYER
Drying chart
Use the chart below and the one on the next
page to guide you when making drying selec-
tions. The charts suggest settings and drying
times for various loads.
• Always follow care label directions when
they are available, especially for delicate
items.
• The check mark (3) denotes recommended
temperature settings. If some types of loads
in the chart have more than one suggested
temperature setting, choose the setting
according to fabric type.
AUTOMATIC CYCLES
TIMED DRY
(heat settings)
CYCLE (minutes)
TYPE OF LOAD
Auto Sense Dry Auto Sense Dry
(High Heat)
(High Heat)
(Low Heat)
COTTONS AND LINENS
Extra Heavy
Bedspreads, mattress pads, quilts
Heavyweight
Towels, jeans, corduroys, work
clothes
40-50
30-40
✓
✓
✓
Mediumweight
Sheets, cotton underwear, diapers
Lightweight
20-30
✓
10-20*
✓
✓
Batistes, organdies, lingerie
PERMANENT PRESS,
SYNTHETICS, AND BLENDS
Heavyweight
Work clothes, jackets, raincoats
Mediumweight
Shirts, play clothes, sheets, slacks
Lightweight
Lingerie, blouses, dresses
20-30
10-20
10-20*
✓
✓
KNITS
Heavyweight
Cottons, rayons, blends, T-shirts,
slacks, shirts
20-30
10-20
10-20*
✓
✓
Mediumweight
Synthetics (polyester, acrylic, etc.),
dress slacks, skirts, sweaters
Lightweight
Synthetics (polyester, acrylic, etc.)
and blends, lingerie, blouses,
dresses
✓
* To remove moisture from clothing, use 10 minutes High Heat then No Heat/Fluff, or use
No Heat/Fluff only.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING YOUR DRYER
No Heat/Fluff cycle
The chart below includes examples of items
that require drying without heat. Use the No
Heat/Fluff cycle, or place the items on a line
or rack to air dry.
NOTES:
• Line dry bonded or laminated fabrics.
• Always follow care label directions when
they are available.
NO HEAT/FLUFF CYCLE*
TYPE OF LOAD
(minutes)
DELICATE FABRICS
10-20
Sheer curtains (two or three panels), gauze, lace, etc.
RUBBER, PLASTIC, HEAT-SENSITIVE FABRICS
Foam Rubber – Pillows, padded bras, stuffed toys
• Make sure coverings are securely stitched.
20-30
• Shake and fluff pillows by hand several times during the
No Heat/Fluff cycle.
• Make sure pillows are completely dry. Foam rubber pillows
take a long time to dry.
20-30
40-50
10-20
Plastic – Shower curtains, tablecloths
Rubber-backed rugs
Olefin, Polypropylene, Sheer nylon
* Reset cycle as needed to complete drying.
End of cycle signal
The dryer sounds a signal to let you know
when the cycle is finished. The signal is
helpful when you are drying permanent
press, synthetics, and other items that should
be removed from the dryer as soon as it
stops. The signal can be turned On or Off.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Laundry Tips
This section provides information on preparing clothes for laundering, removing stains, and
handling special-care items.
Sorting clothes
• Separate dark from light colors; colorfast
from noncolorfast. Items
properly sorted for washing
are usually properly sorted
for drying.
• Separate lint givers (towels, chenille) from
lint takers (corduroy, synthetics, perma-
nent press). When possible, turn lint takers
inside out.
• Separate heavy fabrics (denim, towels)
from light fabrics (synthetics, permanent
press).
Choosing load sizes
• Mix large items with smaller items. Load
the washer or dryer by the
• For better tumbling action, when drying
only a few small items, add one or two lint-
free towels. This also prevents small,
lightweight items from blocking airflow.
amount of space items take
up, not by their weight.
Overcrowding causes poor
• To reduce wrinkling when washing,
permanent press and synthetic knits
should have more room to move in the
water than heavy items (towels, jeans).
cleaning, uneven drying, and
wrinkling, and can cause items to wear out
faster (because of pilling).
• You may need to rearrange large items
(sheets, blankets, tablecloths) during a
cycle to reduce balling or rolling up.
Washing and drying tips
• Close zippers, snaps, and hooks to avoid
snagging other items. Remove
heat-sensitive trim that can be
damaged by drying. Tie strings
and sashes so they will not
tangle.
• Sharp or metal objects can damage your
washer interior or dryer drum.
Check pockets for pins, clips,
money, bolts, nuts, etc. Do
not lay these objects on your
washer or dryer after emptying
pockets. Turn pockets of heavy items
inside out for even drying.
• Check garments to make sure all spots
and stains were removed during the wash.
Do not tumble dry soiled or stained items.
Heat may permanently set stains.
• Place small items such as baby socks or
hankies in a mesh bag for easier removal.
• Articles to be ironed should be removed
from the dryer while still damp.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
LAUNDRY TIPS
Using dryer fabric softeners
Dryer fabric softeners are recommended for
reducing static cling and for softening
fabrics. Always follow package instructions
carefully. Use fabric softeners labeled as
dryer safe.
• Remove fabric softener stains by wetting
the stains and rubbing them with liquid
detergent or bar soap and rewash.
• Some fabric softeners may cause a
build-up on the lint screen. See “As
needed cleaning – dryer.”
• Put one fabric softener sheet on top of the
load before starting the
dryer. Do not add a fabric
softener sheet after the drying
cycle has started. Instant heat
can cause the fabric softener
to spot fabrics.
Water guidelines
Washer loading suggestions
For these suggested full-sized loads, use the highest water level setting.
LARGE CAPACITY WASHERS
Knits
Permanent Press
1 double sheet
1 tablecloth
1 dress
1 blouse
2 slacks
Heavy Work Clothes
2 pairs pants
3 shirts
3 pairs jeans
1 coverall
Mixed Load
2 double or
1 king size sheet
4 pillowcases
6 T-shirts
6 pairs shorts
2 shirts
2 slacks
2 blouses
4 shirts
4 tops
2 dresses
3 shirts
2 pillowcases
Delicates
2 camisoles
4 slips
4 panties
2 bras
Towels
2 blouses
6 handkerchiefs
8 bath towels
8 hand towels
10 wash cloths
1 bath mat
2 nighties
21
Download from Www.Somanuals.com. All Manuals Search And Download.
LAUNDRY TIPS
Selecting water temperatures
WASH WATER
TEMPERATURE* SUGGESTED FABRICS
COMMENTS
HOT
• Work clothes
• Best cleaning for heavily soiled items
130°F (54°C)
or above
• Sturdy whites/colorfast
pastels
• Removes oils, perspiration, greasy
soils, and stains
• Diapers
• Prevents graying or yellowing
WARM
90-110°F
(32-44°C)
• Dark/noncolorfast colors
• Permanent press items
• Nylon, polyester, acrylics,
silks, woolens
• Best for lightly soiled to moderately
soiled items
• Safe for most fabric finishes
• Less fading and dye bleeding
• Reduces wrinkling
• Knits/delicate fabrics
• Extra-sensitive colors
• Noncolorfast items
• Hand washables
• Best for very lightly soiled items
• Saves hot water
• Best rinse water temperature
COLD
70-90°F
(21-32°C)
* The washer features cold rinses for all wash temperatures.
Checking hot water
temperature
Your hot water should be 130°F (54°C) or
above. If you do not know your hot water
temperature, you can check it easily. You
may need to raise the temperature of your
water heater. To check your hot water:
Water hardness
Many poor washing results can be traced to
the hardness of the wash water. To check
your water hardness:
• City water – ask the city water company.
• Well water – ask the local water authority.
Ask for the mineral content in grains/gallon
or parts/million. If your water is more than
8 grains/gallon or more than 137 parts/
million, you should consider:
• Installing a water softener.
• Using more detergent.
• Using a packaged water conditioner.
• Not using soap.
1. Fill a pan with the hottest water available
from the faucet that fills your washer.
NOTE: If you do not have a faucet at your
washer site, collect the water from the
faucet closest to your washer.
2. Place a candy thermometer or cooking
thermometer in the water to check the
temperature.
NOTE: In wash water temperatures colder
than 70°F (21°C), detergents do not dissolve
well. Also, soils may be difficult to remove,
and some fabrics may retain wear wrinkles
and may have increased pilling.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
LAUNDRY TIPS
Removing stains
Stained, heavily soiled, or greasy items may
need to be prewashed or soaked for best
results. Soaking helps remove protein-type
stains like blood, milk, or grass. Prewashing
helps loosen soil before washing.
Stain removal rules
• Use warm water for soaking or prewashing
• When bleach is recommended, use a
bleach that is safe for the fabric.
stained laundry. Hot water can set stains.
• Most stains are easier to remove when
they are fresh. Old or set stains may not
come out. Follow package directions for
pretreatment products.
• Before treating any stain, find out what
kind of stain it is, how old the stain is, what
kind of fabric it is, and if the fabric is
colorfast. (Check the care label.)
• Test stain removers on an inside seam or
hidden corner of the item to see if the color
is removed.
• Put the stained area face down on a paper
towel or white cloth. Apply the stain
remover to the back of the stain. This
forces the stain off the fabric instead of
through it.
• Washing and drying can set some stains.
• Start with cold or warm water. Hot water
can set some stains.
• Meat tenderizer or enzyme presoaks help
break down some protein stains so they
are easier to remove.
Stain removal guide
STAIN
TO REMOVE
Alcoholic
beverage
These stains turn brown with age, so treat immediately. Sponge or soak
fresh stains with cold water. Wash. If stain remains, soak 15 minutes in a
solution of lukewarm water, liquid detergent, and a few drops of white
vinegar. Rinse. Wash.
Blood
Rinse immediately or soak in cold water with enzyme presoak for 30
minutes or longer. Rinse. Rub detergent into any remaining stains. Rinse.
If stain remains, put a few drops of 3% hydrogen peroxide on stain for
3-5 minutes. Rinse thoroughly. Wash.
Chewing
gum
Use ice to make gum hard. Scrape off what you can. Sponge with a
nonflammable fabric cleaner. Let dry. Wash.
Chocolate
or coffee
Sponge immediately with a nonflammable fabric cleaner or apply a prewash
soil and stain remover. Rinse. Wash. If stain remains, apply a liquid deter-
gent to stain or soak in warm water with an enzyme presoak. Rewash.
Crayon and Scrape off excess with a dull knife. Place fabric between two blotters or
candle wax
facial tissue. Press with warm iron. Remove color stain with nonflammable
fabric cleaner. Hand wash until stain is gone. If full load is crayon stained,
take to cleaners or coin-operated dry cleaning machine.
Cream,
milk, or
ice cream
Sponge with a nonflammable fabric cleaner, or a prewash soil and stain
remover. Rinse. Wash. Repeat if necessary. If stain remains, apply a few
drops of liquid detergent and a few drops of ammonia. Blot dry and rinse.
If stain remains, soak in an enzyme presoak. Wash.
23
continued on next page
Download from Www.Somanuals.com. All Manuals Search And Download.
LAUNDRY TIPS
TO REMOVE
STAIN
Light stain: Treat with liquid detergent or your regular laundry detergent.
Wash in hottest water safe for fabric.
Deodorants
and anti-
perspirants
Heavy stain: Place face down on towel and treat with a paste of ammo-
nia and color safe bleach. Let stand for 30 minutes. Wash in hottest water
safe for fabric.
wWARNING
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on it
(including cooking oils).
Doing so can result in death or fire.
Fat, grease, Items soiled with vegetable or cooking oil should not be washed or dried.
or oil
For other types of greasy stains, use one of the methods below:
• Use pretreatment stain remover. Follow label directions. Wash in hottest
water safe for fabric.
• Use talcum powder to absorb as much grease as possible. Sponge with
a nonflammable fabric cleaner. Rinse. Wash.
• Treat with liquid detergent or rub a detergent paste on the stain. Wash
using hottest water safe for fabric.
Fruit stains Fresh stains: Soak immediately in cool water. Wash. If stain remains,
cover area with a paste made of color safe bleach, a few drops of hot
water, and a few drops of ammonia. Wait 15-30 minutes. Wash.
Old stains: Sponge with white vinegar. Rinse. Repeat procedure for
fresh stains.
Grass or
green
vegetables
Soak in warm or cold water with an enzyme presoak for at least 30 minutes,
or sponge with denatured alcohol. Wash in water temperature and bleach
safe for the fabric. For colored fabrics, check colorfastness before applying
alcohol. For acetate, sponge with a nonflammable fabric cleaner. If stain
remains, bleach with 3% hydrogen peroxide. Rinse. Rewash.
Ink or
ballpoint
pen ink
Spray stain with an aerosol hair spray or rubbing alcohol. Sponge stain
continuously until all bleeding stops. Let dry. Repeat if necessary. Wash.
If stain remains, bleach, if safe for fabric. (India and other indelible inks
are almost impossible to remove completely.)
Iron or rust Colored or noncolorfast items: Apply lemon juice and salt. Place in the
sun to dry. Rinse thoroughly. Repeat if necessary.
White or colorfast items: Try a rust remover. Test first on inside seam or
hem. Some rust removers are not washer safe. Follow package directions.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
LAUNDRY TIPS
TO REMOVE
STAIN
Sponge immediately with a nonflammable fabric cleaner or apply a prewash
soil and stain remover. Rinse. Wash. If stain remains, apply a liquid deter-
gent to stain or soak in warm water with an enzyme presoak. Rewash.
Ketchup or
tomato
products
Apply nonflammable fabric cleaner or prewash soil and stain remover.
Blot with absorbent material. Repeat if necessary. Rinse. If stain remains,
rub with liquid detergent. Wash.
Lipstick
Scrape off excess with a dull knife. Soak in cold or warm water with
enzyme presoak at least 30 minutes, or treat stains with a nonflammable
fabric cleaner. Wash.
Meat juice,
egg
Wash in hottest water safe for fabric. If stain remains, soak in warm water
and a color safe bleach for 15-30 minutes. Rewash. (Old mildew stains
are almost impossible to remove. Mildew fungus destroys or weakens
fabrics.) An alternative to bleach is to treat with salt and lemon juice and
dry in direct sunlight. Rinse and rewash. Mildew may form if wet or damp
laundry remains in your washer for extended periods of time. To prevent
mildew, promptly dry laundry after washing.
Mildew
Treat immediately. Scrape off excess mustard. Sponge with a nonflam-
mable fabric cleaner or a prewash soil and stain remover. Rinse. Work
liquid detergent and a few drops of vinegar into stain. Rinse. If stain
remains, apply 3% hydrogen peroxide. Rinse and wash.
Mustard
Paint
Hand wash paint-stained items.
Water base: Treat stains while still wet. (These paints cannot be removed
after they have dried.) Rinse in warm water to flush out paint. Sponge with
a nonflammable fabric cleaner. Rinse. Wash.
Oil base: Scrape off fresh paint. Sponge with a nonflammable fabric
cleaner. While stain is still wet with solvent, rub liquid detergent into it.
Wash with hottest water safe for fabric.
Remove stains before ironing. Perspiration stains may weaken fabric.
Wash or sponge stain thoroughly with detergent and warm water. If
perspiration has changed the color of the fabric, use one of the following
treatments:
Perspiration
Fresh stains: Apply ammonia to stain. Rinse. Launder to remove
ammonia odor.
Old stains: Apply white vinegar to stain. Rinse. Launder to remove
vinegar odor.
Severe scorch cannot be removed. Wet stain with 3% hydrogen peroxide.
Cover with a dry cloth and press with an iron as hot as is safe for fabric.
Rinse well. Wash.
Scorch
OR
Wet with lemon juice and spread in the sun to dry. Wash.
Sponge immediately with cold water and alcohol. Heat and detergent may
set stain.
Soft drinks
25
Download from Www.Somanuals.com. All Manuals Search And Download.
LAUNDRY TIPS
Washing special-care items
Most garments and household textiles have care labels with laundering instructions. Always
follow care label directions when they are available. Below are general washing instruc-
tions for some special washables.
ITEM
CARE INSTRUCTIONS
Blankets
(electric or woolen)
Pretreat spots and stains. Select water temperature, cycle, and time
according to the type of blanket being washed. An extra rinse may
be necessary (see “Using Rinse and Spin”). Check care label to see
if manufacturer recommends machine washing.
Curtains, drapes,
slipcovers
Wash small loads. Crowding may cause wrinkling. Replace
slipcovers while still slightly damp. They will dry to fit tightly.
NOTE: Sun-damaged curtains and draperies will tear whether
hand or machine washed.
Diapers
When using chlorine bleach for soaking, add extra detergent to
the load. Avoid overuse of fabric softeners – absorbency will be
reduced.
Elastic, spandex
Elastic picks up oil from the body. Oil can damage elastic. Wash
often to reduce the damage. Use warm water and sufficient
detergent to remove oils. Do not use chlorine bleach.
Flame-retardant
clothing
Items will be clearly labeled as flame-retardant. Follow
manufacturer’s instructions to retain flame-retardant qualities.
Knits, washable
Knits are comfortable to wear because they stretch. However,
this means that knits are more likely to be stretched and dam-
aged when washed (especially bulky knits). Knits made of
synthetic fabrics such as polyester, nylon, and acrylic tend to
keep their original shape more than a knit made of cotton
or ramie.
Pillows, stuffed
toys
Washing feather pillows is not recommended unless they will be
dried in a dryer.
Plastic, rubber
items
Treat as delicate items. Wash in warm water. Wash small items
in a mesh bag.
Quilts, bedspreads
Do not wash cotton-filled comforters unless they are quilted or
stitched. Tucked cotton batting tends to slip and become lumpy.
An extra rinse may be necessary.
Scatter rugs
Shake or vacuum rugs to remove loose dirt. Wash more than one
rug at a time. If washing only one rug, add bath towels to balance
the load.
Snowsuits, jackets
Wash only one or two items at a time. You may need to stop the
washer occasionally to press air from the items being washed.
An extra rinse may be necessary.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
LAUNDRY TIPS
Drying special-care items
Most garments and household textiles have manufacturer’s care labels with laundering
instructions. Always follow care label directions when they are available. The Drying
chart in the “Operating Your Dryer” section includes drying instructions for most types of
washables. The chart below provides drying instructions for special-care washables.
ITEMS
DRYING INSTRUCTIONS
Blankets and
woolens
Machine drying knitted woolens is not recommended. Block to shape
when wet and allow to air dry. Line dry blankets in shade on a breezy
day over two lines. Pin edges together and straighten them. When
partly dry, turn the blanket over, repin, and restraighten. When dry,
brush nap.
Dry as recommended for permanent press fabrics. Refer to the
Drying chart in the “Operating Your Dryer” section.
• Cotton, rayon,
synthetic blankets
• Electric blankets,
electric sheets,
woolen blankets,
washable woolen
garments
If manufacturer recommends machine drying:
1. Place one or two dry towels in the dryer and preheat three to five
minutes on a high setting. This will dry blankets faster and help
avoid pilling.
2. Put blanket in dryer with warm towels. Set control for 20 minutes.
3. Check after 10 minutes. Remove when still damp. Overdrying and
long tumbling can cause shrinking and pilling.
4. Place blanket on flat surface or over two lines to finish drying.
Gently stretch to original size and shape.
5. When completely dry, brush gently to raise nap. Press binding
with cool iron if needed.
Curtains,
Remove drapery weights and hooks before laundering.
slipcovers
For slipcovers, replace while still slightly damp. They will dry to fit
tightly.
Dry only a few minutes.
1. Leave room in dryer for load to fluff.
2. Remove from dryer while slightly damp. Do not overdry.
• Draperies,
slipcovers
Wash and dry small items in a mesh bag or pillowcase for
convenient handling.
Diapers, baby
clothes
Remove diapers and cotton knit items while still slightly damp. They
will feel softer, shrink less, and be easier to fold.
Remove from dryer while still slightly damp.
Elastic items
Some items have been treated with a flame-retardant finish to
improve their resistance to burning. Such items are clearly labeled.
To retain flame-retardant qualities through continuous use and
washing, clean and dry according to the manufacturer’s instructions.
Flame-retardant
clothing
continued on next page
27
Download from Www.Somanuals.com. All Manuals Search And Download.
LAUNDRY TIPS
DRYING INSTRUCTIONS
ITEMS
Knits,
washable
Do not overdry knits. Overdrying can cause shrinking and static cling.
1. Select cycle according to fabric and construction.
2. Turn synthetics and blends inside out when drying to avoid pilling.
3. Remove cotton and rayon knits while still slightly damp. Stretch into
shape and lay flat to finish drying.
Dry separately or with similar colors to avoid lint transfer. Follow care
label instructions.
Napped items
1. Remove from dryer while there is still a trace of moisture.
2. Smooth, reshape, and air dry before putting away.
• Corduroy,
velveteen
Follow care label instructions.
1. Dry one at a time.
Quilted, down-
filled items
2. Remove from dryer and shake or fluff the item during the drying cycle.
3. Smooth and reshape before putting away.
Check label for fiber content, then follow care label instructions.
Snowsuits,
jackets
1. Dry garment for about 10 minutes. Remove and turn inside out.
• Nylon or
polyester
Dry for 10 more minutes.
2. Remove from dryer immediately and hang on a nonrusting hanger
to finish drying. This will help eliminate wrinkles.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for Your Washer/Dryer
Proper care of your washer/dryer can extend its life. This section explains how to care for
your washer/dryer properly and safely.
Every load cleaning – dryer
Cleaning the lint screen
3. Push the lint screen firmly back into place
and close the door.
The lint screen is located at the front of the
dryer door opening. Clean it before each
load. A screen blocked by lint can increase
drying time.
IMPORTANT:
• Do not run the dryer with the lint screen
loose, damaged, blocked, or missing.
Doing so can cause overheating and
damage to both the dryer and fabrics.
1. Open the door and pull the lint screen
straight up.
• Some towels made of synthetic fibers and
natural fibers (polyester and cotton blends)
may shed more lint than other towels,
causing your dryer’s lint screen to fill up
faster. Be sure to remove lint from the lint
screen before and after drying new towels.
2. Roll lint off the screen with your fingers.
Do not rinse or wash the screen to
remove lint. Wet lint is hard to remove.
As needed cleaning – washer
Exterior
Interior
Wipe up detergent, bleach, and other spills
with a soft, damp cloth or
sponge as they occur. Occa-
sionally wipe the outside of
the washer to keep it looking
like new.
Clean interior with 1 cup (250 mL) of chlo-
rine bleach mixed with 2 cups (500 mL) of
detergent. Run washer through a complete
cycle using hot water. Repeat process if
necessary.
NOTE: Remove hard water deposits using
only cleaners labeled as washer safe.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
CARING FOR YOUR WASHER/DRYER
As needed cleaning – dryer
Exterior
Clogged lint screen
Wipe with a soft, damp cloth.
Laundry detergents and fabric softeners can
cause a residue buildup on the lint screen.
Clean the lint screen with a nylon brush
every six months or more frequently if it
becomes clogged due to a residue buildup.
Interior
Garments which contain unstable dyes,
such as denim blue jeans or brightly colored
cotton items, may discolor the dryer interior.
Even after cleaning, these stains may
reappear when similar loads are dried.
These stains are not harmful to your dryer
and will not stain future loads of clothes. It
may be helpful to dry unstable dye items
inside out to prevent dye transfer.
Use the following method:
1. Wet both sides of lint screen with hot water.
2. Wet a nylon brush with hot water and
liquid detergent; scrub lint
screen with the brush to
remove residue buildup.
wWARNING
3. Rinse screen with hot water.
4. Thoroughly dry lint screen with a clean
towel; replace in dryer.
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death,
explosion, or fire.
To clean dryer drum:
1. Make a paste with powdered laundry
detergent and very warm water.
2. Apply paste to a soft cloth and scrub area
until all excess dye is removed.
OR
Apply a liquid, non-flammable
household cleaner to the
stained area and rub with a
soft cloth until all excess dye is removed.
3. Wipe drum thoroughly with a damp cloth.
4. Tumble a load of clean cloths or towels to
dry drum.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
CARING FOR YOUR WASHER/DRYER
Removing accumulated lint from inside the
dryer cabinet
Lint can gather inside the dryer and be a fuel
for fire. Lint should be removed every two to
three years, or more often, depending on
dryer usage. Cleaning should be done
by a qualified person. If you need more
information, please call our Consumer
Assistance Center at 1-800-253-1301.
wWARNING
Electrical Shock Hazard
Disconnect power before cleaning.
Replace all panels before operating.
Use two or more people to move
washer/dryer.
Failure to do so can result in death,
electrical shock, or other injury.
1. Unplug washer/dryer or disconnect
power.
2. Remove the rear panel using a hex-head
screwdriver.
3. Remove any lint using a vacuum cleaner
or soft brush. Avoid damaging wires and
thermostats.
4. Replace rear panel.
5. Level the washer/dryer if necessary.
Dryer with rear panel removed
6. Plug in washer/dryer or reconnect power.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
CARING FOR YOUR WASHER/DRYER
Winter storage or moving care
Install and store your washer/dryer where it
will not freeze. Because some water may
stay in the hoses, freezing can damage your
washer/dryer. If storing or moving your appli-
ance during freezing weather, winterize it.
To use washer again:
1. Flush water pipes and hoses.
2. Reconnect water inlet hoses.
3. Turn on both water faucets.
4. Reconnect power supply cord.
5. Run the washer through a complete cycle
with one cup (250 mL) of detergent to
clean out antifreeze.
To winterize or move washer:
1. Shut off both water faucets.
2. Disconnect and drain water inlet hoses.
3. Put one quart (1L) of R.V.-type antifreeze
in the basket.
4. Unplug the power supply cord.
NOTE: If you are moving, run washer on a
drain and spin setting (see “Using Drain and
Spin”) for about 30 seconds to mix the
antifreeze and water.
Non-use or vacation care
Operate your washer/dryer only when you
are at home. If you will be on vacation or will
not be using your washer/dryer for an ex-
tended period of time, you should:
• Unplug the power supply cord or turn off
electrical power to the washer/dryer.
• Turn off the water supply to the washer.
This helps avoid accidental flooding (due
to a water pressure surge) while you
are away.
Saving energy
Dryer
Washer
• Use an Automatic cycle to dry most loads.
• Dry only full loads without overdrying.
• Avoid overloading dryer, adding wet items
to a partly dried load, or opening the door
unnecessarily.
• Plan your laundry to dry one load after
another. A warm dryer shortens drying
time.
• Use warm or cold wash water for most
loads. Use hot water only when washing
heavy, greasy soils or whites.
• Wash full loads.
• Avoid rewashing. Use enough detergent
and pretreat stains or heavy soils. Use the
cycles and wash times recommended for
the fabric and soil.
• Use your washer during off-peak hours –
usually early morning and late evening.
(Ask your power company for details.)
• Shorten drying times by exhausting dryer
properly and cleaning exhaust vent and
outside exhaust hood as needed.
– Keep the lint screen clean.
– Use your dryer in a room where room air
temperature is above 45°F (7°C).
– Sort loads by fabric weight and type.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Most laundering problems are easily solved if you understand the cause. Check the following
lists for laundry problems you may have and their possible causes. Also refer to “Common
washer/dyer problems” within this section for a washer/dryer checklist which can help you
solve some simple problems without calling for service. If you still need help, see the
“Requesting Assistance or Service” section.
Common laundry problems – washer
PROBLEM
CAUSE
Brown, yellow
stains
• Chlorine staining
• Iron in water heater or pipes; iron and manganese in water
Dye transfer
• Improper sorting
• Load not immediately removed from washer after end of cycle
Gray whites,
dingy colors
• Improper sorting
• Water temperature too low
• Not enough detergent
• Using soap in very hard water (use detergent in hard water)
Greasy looking
spots
• Fabric softener poured directly on clothes
• Not enough detergent or dispenser not used
Lint
• Improper sorting
• Paper or tissue in pockets
• Pilling being mistaken for lint
• Not enough detergent
• Cold rinses
• Cycle stopped before spinning is complete
Load too wet
after spin
Shrinking
• Fabric type (some knits stretch during manufacturing –
laundering returns fabric to original size)
• Care label directions not followed
Snags, rips,
and holes
• Items damaged before washing
• Misuse of color safe bleach (do not pour directly on clothes);
dispenser not used
• Sharp items not removed from pockets; fasteners not fastened
• Using soap in very hard water (use detergent in hard water)
• Not enough detergent
Stiff, rough
fabrics
• Line drying
• Overloading
• Clothes wrapped around agitator
Twisting/
Tangling
• Overloading (leave more room for permanent press and knits)
• Load not immediately removed from washer after cycle
• Warm rinse water
Wrinkling
• Cycle selection incorrect
Yellow areas
(from body oils)
• Water temperature too low
• Not enough detergent
33
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Common laundry problems – dryer
PROBLEM
CAUSE
Slow drying
or clothes
still wet
• Incorrect cycle setting selected.
• Full or clogged lint screen. (See the “As needed cleaning – dryer”
section.)
• Exhaust vent clogged, restricted, or too long. (See the “Checking Your
Vent ” section and Installation Instructions.)
• Washer/dryer located in room with temperature below 45° (7°C).
• Load too large and bulky to dry quickly.
• Drying heavy fabrics (denim, towels) with light fabrics (synthetics,
permanent press).
• Fabric softener sheet blocking exhaust grill inside dryer drum.
Lint
• Full lint screen. (See the “As needed cleaning – dryer” section.)
• Load not properly sorted.
• Overdrying, especially synthetic fabrics that cause lint-attracting static
electricity.
• Load size too big or heavy.
• Tissue or paper left in pockets.
• Pilling (surface fuzz caused by normal wear and laundering)
attracts lint.
Static
electricity
• Overdrying.
• Dryer fabric softener improperly used. See package directions.
• Load includes synthetics, synthetic blends, permanent press, and
knit fabrics that build up static electricity.
Wrinkling
Shrinking
• Overloading.
• Overdrying, especially permanent press and synthetic fabrics.
• Large items balling or rolling up.
• Clothes left in dryer at end of cycle.
• Overdrying.
• Fabric or garment is not designed for tumble drying.
• Dryer settings incorrect for fabric type.
• Care label instructions not followed.
Greasy
spots/stains
• Dryer fabric softener improperly used. Do not add to a warm load.
• Drying soiled items.
Color change
• Drying dark colors with light colors.
• Drying colorfast colors with noncolorfast colors.
Garment
damage
• Zippers, snaps, and hooks left open.
• Strings and sashes not tied to prevent tangling.
• Care label instructions not followed.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Common washer/dryer problems
1. Washer/dryer will not start
2. Lint accumulation in hood or exhaust
vent, or extended drying times
Is the washer lid closed?
Is the lint screen full?
▼
▼
OR
Is exhaust vent or outside
exhaust hood clogged with lint?
Refer to the “Checking Your
Vent” section.
Is the dryer door firmly closed?
▼
3. No water – washer
Is the washer Cycle Control
Knob set and pulled out?
Are both the hot and cold
water faucets turned on?
▼
OR
▼
Are the dryer controls set in an
On position?
Are the water hoses kinked or
clogged?
▼
▼
Is the drain hose higher than
the water level in the washer?
It must be higher for proper
operation.
Did you firmly push the dryer
Start Button?
▼
NOTE: Washer stops briefly during a wash
cycle. These pauses are normal.
Is the power cord plugged in?
4. No heat – dryer
▼
Have you blown a household
fuse or tripped the circuit
breaker? Electric dryers use
2 household fuses or breakers.
Have you blown a household
fuse or tripped the circuit
breaker? Electric dryers use
2 household fuses or breakers.
continued on next page
35
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
5. Noises – dryer
If the dryer hasn’t been used
for awhile, there may be a
thumping sound during the
first few minutes of operation.
If noises continue, call the
Consumer Assistance Center.
6. Odor – dryer
When operating a new dryer,
the new electric heating
element may have an odor.
Are household chemical odors
being drawn into the dryer?
Proper ventilation must be used if painting
or staining near the dryer.
NOTE: Store and use paints, varnishes,
etc. away from your washer/dryer whenever
possible.
If you still have problems, see the “Request-
ing Assistance or Service” section.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Requesting Assistance
or Service
Before calling for assistance or service, please check the “Troubleshooting” section. It may
save you the cost of a service call. If you still need help, follow the instructions below.
1. If you need assistance* …
Call our toll-free number. Dial toll-free from
anywhere in the U.S.A.:
3. If you need
replacement parts …
To locate replacement parts in your area,
refer to step 2 or call our Consumer Assis-
tance Center number in step 1.
1-800-253-1301
and talk with one of our trained
consultants. The consultant can
instruct you in how to obtain
Gear case assembly
covered by your
warranty.
satisfactory operation from your appliance
or, if service is necessary, recommend a
qualified service company in your area.
2. If you need service* …
Contact the dealer from whom you pur-
chased the appliance or the
authorized servicer in your
area. For help finding an
SERVICE
authorized service company in
your area, call our toll-free
telephone number in Step 1.
* When asking for help or service:
Please provide a detailed description of the problem, your appliance’s complete model
and serial numbers, and the purchase date. (See the “A Note to You” section.) This
information will help us respond properly to your request.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
38
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Combo Washer/Dryer
Warranty
LENGTH OF WARRANTY
CROSLEY WILL PAY FOR
Replacement parts and repair labor to correct defects
in materials or workmanship. Service must be provided by
an authorized service company.
FULL ONE-YEAR
WARRANTY
FROM DATE OF PURCHASE
LIMITED FIVE-YEAR
WARRANTY
FROM DATE OF PURCHASE
Replacement parts for any part of gearcase assembly
if defective in materials or workmanship. The gearcase
assembly is shown in the “Requesting Assistance or
Service” section of this book.
Replacement parts for any top and lid rust.
LIMITED TEN-YEAR
WARRANTY
Replacement of outer tub should it crack, or fail to contain
water, due to defective materials or workmanship.
FROM DATE OF PURCHASE
CROSLEY WILL NOT PAY FOR
A. Service calls to:
1. Correct the installation of your washer/dryer, including venting. Heavy four-inch
metal exhaust vent must be used. Refer to the “Checking Your Vent” section of
this Use and Care Guide, and your Installation Instructions.
2. Instruct you how to use your washer/dryer.
3. Replace house fuses or correct house wiring or plumbing.
4. Replace light bulbs.
B. Repairs when your washer/dryer is used in other than normal, single-family household use.
C. Pickup and delivery. Your washer/dryer is designed to be repaired in the home.
D. Damage to your washer/dryer caused by accident, misuse, fire, flood, improper
installation (including, but not limited to, venting with plastic or flexible foil), installation
not in accordance with local electrical or plumbing codes, acts of God, or use of
products not approved by the washer/dryer manufacturer.
E. Any labor costs during the limited warranties.
F. Repairs to parts or systems caused by unauthorized modifications made to the
appliance.
4/97
CROSLEY SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Some states do not allow the exclusion or limitation of incidental or consequential damages,
so this exclusion or limitation may not apply to you. This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state.
Outside the United States, a different warranty may apply. For details, please contact
your authorized distributor or dealer.
If you purchased your washer/dryer in the United States, for use in a foreign country, this
warranty does NOT apply.
If you need service, first see the “Troubleshooting” section of this book. After checking
“Troubleshooting,” additional help can be found by checking the “Requesting Assistance
or Service” section, or by calling our Consumer Assistance Center telephone number,
1-800-253-1301, from anywhere in the U.S.A.
5/97
PART NO. 3406874
Printed in U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
|