INSTRUCTION BOOKLET
INTEGRATED
COOKER HOOD
TH 500
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INFORMATION
These warnings are provided in the interests of your safety. Ensure that you understand them
all before installing or using this appliance. Your safety is of paramount importance. If you are
unsure about any of the meanings of these warnings contact the Customer Care Department.
• If other types of flue or appliances are fitted
ensure that there is an adequate supply of air
■ Installation
• Any installation work must be undertaken by
to the room.
a qualified electrician or a competent person.
• The ducting system for this appliance must
• This hood must be installed in accordance
not be connected to any existing ventilation
with the installation instructions and all
system which is being used for any other
measurements must be adhered to.
purpose.
• If the cooker hood is installed for use above
• Do not install above a cooker with a high
a gas appliance then the provision for
level grill.
ventilation must be in accordance with the
Gas Safety Codes of Practice.
■ Child Safety
BS.6172, BS.5440 and BS.6891 (Natural
Gas) and BS.5482 (LP Gas) 1994, the Gas
Safety (Installation & Use) Regulations, the
Building Regulations issued by the
Department of the Environment, the Building
standards (Scotland) (Consolidated)
Regulations issued by the Scottish
Development Department.
• This appliance is designed to be operated by
adults. Children should not be allowed to
tamper with the controls or play with the
appliance.
■ During Use
• This product is for domestic use only.
• The fan motor of this cooker hood
incorporates a cut-out device which will
operate if the cooker hood is installed below
the minimum height recommended under
section ‘Clearance Height’, or if the motor
becomes overheated. If the cut-out device is
activated, switch off the fan motor and allow
the cooker hood to cool. The cut-out device
will reset itself when the fan motor has
cooled significantly.
• Never leave frying pans unattended during
use as over-heated fats and oils might catch
fire.
• Never do flambé cooking under this cooker
hood.
• Do not leave naked flames under the hood.
■ Maintenance and Service
• It is dangerous to alter the specifications or
modify this product in any way.
• This appliance can be a fire hazard if the
grease and charcoal filters are not replaced
as recommended.
• When installed between adjoining wall
cabinets the wall cabinets must not overhang
the hob.
• Under no circumstances should you attempt
to repair the appliance yourself. Repairs
carried out by inexperienced persons may
cause injury or more serious malfunction.
Refer to your local Zanussi Service Force
Centre. Always insist on genuine spare
parts.
• If the room where the hood is to be used
contains a fuel burning appliance such as a
central heating boiler then its flue must be of
the room sealed or balanced flue type.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
YOUR APPLIANCE
OPERATING INSTRUCTIONS
This cooker hood is designed to extract
unpleasant odours from the kitchen, it will not
extract steam.
Cooker Hood Controls
The cooker hood functions are controlled by
three slider switches which are located in a
fold away control box on the right hand side.
Automatic Microswitch
The microswitch overrides the controls, and
switches off the hood when the visor is closed.
When the visor is opened the hood will
resume the function of previous setting.
Fan ON/OFF control
Position 1 - Low
Position 2 - Normal
Position 3 - Boost
Light ON/OFF control
To Operate
Extend the visor and select the required functions.
To obtain the best performance it is advisable
to switch on the hood a few minutes before
you start cooking and leave it running for
approximately 15 minutes after finishing.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
The appliance can be installed to recirculate
or extract contaminated air. However, the
cooker hood is more effective in the extraction
mode.
Recirculation
The contaminated air is cleaned by passing
through the filters and then back into the
kitchen.
Extraction
The contaminated air enters the hood passing
through the grease filter and out through the
ducting to the atmosphere.
When the ducting position is selected
the charcoal filter is not required.
Never do flambé cooking under this
cooker hood.
Never leave frying pans unattended during use
as over-heated fats and oils can catch fire.
Do not leave naked flames under the
cooker hood.
Ensure the visor is open when using the
hob even if the fan on the hood is not
switched on.
Ensure heating areas on your hob are
covered with pots and pans when using
the hob and cooker hood simultaneously.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE AND CLEANING
Before carrying out any maintenance or cleaning
isolate the cooker hood from the mains supply.
The cooker hood must be kept clean, a
build up of grease or fat can be a fire hazard.
External Cleaning
The metal casing, grille and visor should be
cleaned at least once a month to keep it
looking like new. Wipe over the hood with a
soft cloth wrung out in mild soapy water and
then dry thoroughly.
Never use scouring pads or abrasive cleaners
as they may scratch or damage the surfaces.
Always wear protective gloves when
cleaning the hood.
Never use scouring pads or abrasive
cleaners.
Never use excessive amounts of water
when cleaning particularly around the
control panel.
Metal Grease Filters
The metal grease filters should be cleaned at
least every month. The filters may be washed
by hand using mild soapy water, or they can
be machine washed in a dishwasher.
KTo remove the grease filter cassette
1.
Open the visor.
2.
Press inwardly on the two slide catches
and remove.
Charcoal Filter
The charcoal filters cannot be cleaned. The
filter should be replaced at least every three
months or more frequently if the hood is used
more than three hours per day.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
KTo Remove/Replace the Charcoal Filter
1.
2.
3.
Open the visor.
Remove the metal grease filters.
Remove one filter at a time by placing one
hand over the filter and releasing the
spring retaining clip.
4.
Allow the filter to hinge back and then
remove.
Worktop lighting
If the fluorescent strip lamp fails to function
first check to ensure that the pins are located
into the holder.
KReplacing the strip light
1.
2.
Remove the lighting diffuser screws,
through the end capping on the right hand
side.
Slide the diffuser to the left until the
opposite end is free, then pull the diffuser
down.
3.
4.
Remove the fluorescent tube and replace
with one of the same specification.
Replace the cover and the retaining
screws.
KReplacing the strip light starter
1.
Open the visor and remove the grease filter
cassette.
2.
Unscrew the two fixing screws which
secure the internal cover immediately in
front of the lighting diffuser, on the inside
edge of the casing.
3.
4.
Lift the cover from the bottom to remove.
Rotate the starter anti-clockwise, and
replace with one of the identical type.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SOMETHING NOT WORKING
If, having followed these instructions carefully, your cooker hood fails to work properly please carry out
the following checks.
Symptom
Solution
The cooker hood will not start
• Check the hood is connected to the electricity
supply.
• Check that the fan speed control is set to 1, 2
or 3
The cooker hood is not working effectively
• The fan speed is set high enough for
the task
• The grease filter is clean.
• The kitchen is adequately vented to allow the
entry of fresh air.
• If set up for recirculation, check that the
charcoal filter is still effective.
• If set up for extraction, check that the ducting
and outlets are not blocked.
The cooker hood has switched off during
operation
• The safety cut-out device has been tripped.
• Turn off the hob and then wait for the device
to reset.
If after all these checks, the fault persists, con-
tact your local Service Force Centre,
quoting the model and serial number.
In-guarantee customers should ensure
that the above checks have been made as
the engineer will make a charge if the fault
is not a mechanical or electrical
breakdown.
Please note that it will be necessary to
provide proof of purchase for any
in-guarantee service calls.
SERVICE AND SPARE PARTS
If you require an engineer or wish to purchase
spare parts contact your local Service Force
Centre by telephoning:
For general assistance with your appliance or
for information on Zanussi products please
contact our Customer Care Department.
Customer Care Department,
Zanussi
Zanussi House
Hambridge Road
Newbury
Berkshire
RG14 5EP
0990 929929
Your telephone call will be routed to your local
Service Force Centre. For further details please
see the accompanying customer care book.
Tel: 01635 521313
8
Download from Www.Somanuals.com. All Manuals Search And Download.
PEACE OF MIND FOR TWENTY FOUR MONTHS
STANDARD GUARANTEE CONDITIONS
We, Zanussi Ltd., underlake that if within twenty four months of the date of the purchase this
ZANUSSI buill-in appliance or any part thereof is proved to be defective by reason only of faulty
workmanship or materials, the company will, at our option repair or replace the same FREE OF ANY
CHARGE for labour, materials or carriage on condition that.
• The appliance has been correctly installed and used only on the electrical supply stated on the
rating plate.
• The appliance has been used for normal domestic purposes only, and in accordance with the
manufacturer’s operating and maintenance instructions.
• The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any
person not authorised by us.
• All service work under this guarantee must be undertaken by Zanussi Service Force Centre.
• Any appliance or defective part replaced shall become the property of this company.
Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available
outside these hours in which case a premium will be charged.
EXCLUSIONS
This Guarantee does not cover:
Damage or calls resulting from transportation, improper use or neglect, the replacement of any light
bulbs or removable parts of glass or plastic.
• Costs incurred for calls to put right appliances improperly installed or calls to appliances outside the
United Kingdom.
• Appliances found to be in use within a commercial environment, plus those which are the subject of
rental agreements.
• Products of Zanussi manufacture which are not marked by Zanussi Ltd.
This guarantee is in addition to your statutory and legal rights.
ZANUSSI EUROPEAN GUARANTEE
If you should move to another country within Europe then your guarantee moves with you to your new
home subject to the following qualifications:
• The guarantee starts from the date you first purchased your product.
• The guarantee is for the same period and to the same extent for labour and parts as exists in the
new country of use for this brand or range of products.
• This guarantee relates to you and cannot be transferred to another user.
• Your new home is within the European Community (EC) or European Free Trade Area.
• The product is installed and used in accordance with our instructions and is only used domestically,
i.e. a normal household.
Before you move please contact your nearest Customer Care Centre, listed below, to give
them details of your new home. They will then ensure that the local Service Organisation is
aware of your move and able to look after you and your appliances.
France
Germany
Italy
Sweden
UK
Senlis
+33 (0)3 44 62 29 99
+49 (0)911 323 2600
+39 (0)1678 47053
+46 (0)8 738 79 50
+44 (0)1635 521 313
Nurnberg
Pordenone
Stockholm
Newbury
9
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION INSTRUCTIONS
It is dangerous to alter the specifications or attempt to modify this product in any way.
Technical Information
DIMENSIONS
HEIGHT:
38cm
WIDTH
60cm
DEPTH
28cm
DEPTH WITH VISOR OPEN:
GROSS:
NET:
45,5cm
14,7kg
12,7kg
WEIGHT
ELECTRICAL SUPPLY:
POWER CONSUMPTION:
FAN MOTOR:
Voltage (50Hz)
220-240 V
285W
270W
LAMP:
15W
SUITABLE FOR INSTALLATION
ABOVE:
OVER ELECTRIC HOB:
OVER GAS HOB:
SLOT-IN GAS OVEN :
SLOT-IN ELECTRIC COOKER:
7KW (max)
10KW (max)
13.5KW (max)
12.4KW (max)
Note: CE Marking certifies that this appliance complies with the require-
ments laid down in EEC directive 89:336. (Electromagnetic compatibility)
and subsequent modifications and Low Voltage directive 72/23/E.
ELECTRICAL CONNECTIONS
This appliance must be earthed.
Electrical Requirements
This appliance is fitted with a 3 core mains
cable and must be permanently connected to
the electricity supply via a double-pole switch
having 3mm minimum contact gap on each
pole. A Switched Fuse Connection Unit to
BS.1363 Part 4, fitted with a 3A fuse, is a
recommendad mains supply connection
accessory to ensure compliance with the Safety
Requirements applicable to fixed wiring
instructions.
Any permanent electrical installation must
comply with the latest I.E.E. Regulations and
local Electricity Board regulations. For your own
safety this should be undertaken by a qualified
electrician e.g. your local Electricity Board, or a
contractor who is on the role of the National
Inspection Council for Electrical Installation
Contracting (NICEIC).
Electrical Connection
Before connecting to the mains supply ensure
that the mains voltage corresponds to the voltage
on the rating plate inside the cooker hood.
This appliance conforms to BS.800: 1988 and
EEC Directive No. 78 308 regarding
suppression of radio and television
interference.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING THE COOKER HOOD
Please ensure that when the appliance is
installed it is easily accessible to an
engineer in the event of a breakdown.
All installations must comply with the
local authorities requirements for the
discharge of exhaust air.
Incorrect installation may affect the
safety of this cooker hood.
Installation Requirements
Before installation check the wall to
which the cooker hood is to be fitted for
electric cables, water pipes or gas.
Ducting
The ducting must be fire retardant 125mm (5ins)
in diameter and the length should be nomore than:
3 metres with one 900 bend
2 metres with two 900 bends
Bends of more than 900 will reduce the
efficiency of the hood and reduce the airflow.
Clearance Height
The cooker hood is designed to be fitted over
a cooking appliance at the clearance heights
stated, providing the maximum output of the
appliance beneath does not exceed the
maximums quoted in the Technical Specifications.
If the output of the appliance below the
cooker hood exceeds the maximum outputs
quoted, please refer to the cooker
manufacturer’s installation instructions.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearance Height
A minimum clearance height of 650mm
1
2
(25 / ”) is required when installed above a
1
2
built-in electric hob, or 700mm (27 / ”) when
installed above a built-in gas hob.
A minimum clearance height of 685mm (27”)
is required when installed above a slot-in
Hob
1
2
electric oven, or 787mm (30 / ”) when
installed above a slot-in gas oven.
A: Built-in Electric Hob:
B: Built-in Gas hob:
650mm minimum clearance
700mm minimum clearance
When installed between adjoining wall
cabinets, the wall cabinets must not overhang
the hob and the distance between the
underside of the cabinet and the worktop must
be 450mm. If the height of the wall cabinet is
less than 450mm, a gap of 50mm must be
maintained either side of the hob.
C: Slot-in Electric Cooker: 685mm minimum clearance
D: Slot-in Gas Cooker: 787mm minimum clearance
This cooker hood must not be installed
above a cooking appliance with a high
level grill.
Unpacking
Before unpacking the cooker hood position the
carton with the arrows pointing upwards as
illustrated on the carton.
Positioning
This cooker hood is designed to be fitted into
a cabinet which should have a minimum
depth 28 cm and width 60 cm.
Venting
The hood is more effective when used in the
extraction setting (ducted to the outside).
Venting kits maybe purchased through
your retailer or DIY store, and must be ducted
to an outside vent of 100mm (4”) minimum.
The ducting used must be manufactured
from fire retardant material which should
conform to the relevant British Standard
or DIN4102-B1.
When the hood is ducted externally the
charcoal filter must be removed and the slider
control must be in the ducting position.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Insert the ducting spigot into the aperture on
the top of the cooker hood casing.
Fitting the Wall Cabinet
If it is necessary to fix the kitchen cabinet to a
hollow construction plaster or partition board
structure then it must be sufficiently reinforced
to be strong enough to support the weight of
the cooker hood.
Wall Cabinet Preparation
Position the cooker hood upside down,
ensuring the cooker hood is supported. Open
the visor and remove the two metal grease
filter cassettes (see maintenance and cleaning
section).
Mark the position for the cut-out for the cooker
hood on the underside of the kitchen cabinet.
The cut-out should measure, lenght 503 mm by
depth 162 mm.
Mark the position for the cut-out for the
ducting on the top of the kitchen cabinet
ensuring that the centre of the hole aligns
with the centre of the ducting spigot.
A pad saw or similar cutter will be required to
cut the rectangular hole for the cooker hood
and the circular hole for the ducting spigot.
Before inserting the cooker hood inside the
cabinet ensure a hole has been provided to
route the mains cable.
Securing the cooker hood to the wall
K
1.
cabinet
Insert the upper casing of the cooker hood
through the hole from the underside of the
cabinet ensuring that the butterfly bracket
screws have been loosened sufficiently to
allow the wings to be folded back.
2.
3.
Tighten the butterfly bracket screws, by
rotating the screws clockwise.
If further alignment of the cooker hood is
required the lower section of the casing
can be adjusted horizontally, backwards
and forwards.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
KTo adjust the lower casing
1.
Pull out the visor.
2.
Loosen the two screws immediately in front
and behind the butterfly bracket screws.
3.
Once the screws have been loosened the
lower section of the hood can be moved
backward and forward.
This will allow the alignment of the decor trim
with the wall cabinet above.
Care should be taken when carrying out
the above operation not to loosen the
screws too far, and to ensure that the
casing is supported at all times.
Fitting the Control Panel
The control panel support should be located
on the right hand side in the channel on the
underside of the hood.
Using the screws provided secure the control
box support into the pre-drilled hole.
Clearance Height
The cooker hood can be concealed behind a
decor panel by removing the factory fitted front
strip and fitting a length of lighting pelmet.
KTo remove the front strip
1.
Open the visor.
2.
Remove the three screws from the reverse
side.
3.
4.
Drill the new front strip ensuring the holes
are aligned correctly.
Fix the new front strip with the screws
provided.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Dir. 89/336/CEE
73/23/CEE
4324166 01 - 0998
Download from Www.Somanuals.com. All Manuals Search And Download.
|