Zanussi Range ZKF641 User Manual

Electric Ceramic Hob  
ZKF641  
Operating and Installation Instructions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This safety information is provided in the interests of your safety. Please read it carefully  
before installing or using the hob. If you are unsure if the meaning of any of the warnings  
please contact our Customer Care Department.  
Installation  
The cooking zones heat up quickly when they  
are turned on. Only turn them on when a  
saucepan is on the cooking zone.  
The residual heat indicator will not operate if  
there is a power failure.  
Do not store temperature sensitive or  
inflammable materials (e.g. detergents or  
aerosols) in drawers or cupboards underneath  
the hob.  
This appliance must be installed by a qualified  
electrician / competent person, according to the  
manufacturers instructions and to the relevant  
British Standards.  
Remove all packaging before using the  
appliance.  
Ensure the electrical supply complies with the  
type stated on the rating plate.  
Do not attempt to modify the hob in any way.  
Do not install the hob if the ceramic glass is  
damaged or cracked.  
The hob surface must not be used for storage or  
as a working area.  
Do not allow sugar (solid or liquid) or plastic to  
come into contact with the hob surface when  
hot.  
Clean the hob in accordance with the  
Maintenance and Cleaning instructions.  
Do not use the hob if the glass is damaged or  
becomes cracker, contact your local Service  
Force Centre.  
Child Safety  
This appliance is designed to be operated by  
adults. Do not allow children to play near or with  
the appliance.  
The appliance gets hot when it is in use.  
Children should be kept away until it has cooled.  
Children can also injure themselves by pulling  
pots or pans off the hob.  
Service  
This hob should only be repaired or serviced by  
an authorised Service Engineer and always  
insist on genuine spare parts.  
During Use  
Only use the hob when it is fully installed.  
This hob is intended for domestic cooking only.  
It is not designed for commercial or industrial  
purposes.  
Disposal  
Please dispose of any packaging material and  
old appliances at authorised disposal sites with  
due regard for the environment.  
Ensure the power ON/OFF switch is off when  
the hob is not in use.  
When using other electrical appliances, ensure  
the cable does not come into contact with the  
hot surfaces of the hob.  
Do not use unstable or misshapen pans on the  
hob.  
Never leave the hob unattended when cooking  
with fat or oil.  
Never use plastic or aluminium foil dishes on the  
hob.  
Safety Hints and information  
Environmental information  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Cooking Zone  
2. Cooking Zone  
3. Cooking Zone  
4. Cooking Zone  
ø 180 mm  
ø 180 mm  
ø 145 mm  
ø 145 mm  
1700 W  
1700 W  
1200 W  
1200 W  
5. Residual Heat Indicator  
6. Heat setting control knobs  
Voltage AC 230 V  
Total connected Load 5.8 kW  
Please check that the appliance was  
delivered in perfect condition.  
Appliances with obvious transport  
damage must not be connected to the  
mains.  
First Cleaning  
In order to remove any remnants left by production,  
clean the hob before it is first use.  
Ensure any labels and protective films on the hob  
are removed.  
Clean the ceramic glass and the frame with hot  
water and a little washing up liquid added.  
First Heating Up  
Check each cooking zone, in turn, by briefly  
switching to the maximum setting (10).  
When using the ceramic hob for the first time it can  
temporarily emit an odour.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ceramic glass surface  
The cooking surface is made of proven ceramic  
glass. The surface is non-porous and, in addition,  
insensitive to quick variations in temperature.  
Therefore pots may be moved from a hot to a cold  
zone.  
When switching on the cooking zones you may  
hear a short-term audible buzzing sound of the  
radiant elements. This will not harm the  
performance of the appliance.  
Keep all objects and materials that  
might smelt away from the heat zones.  
Sugar solutions, food stuffs with a high  
sugar content, plastics, or kitchen foil –  
must be removed immediately with a  
glass scraper. If this type of soiling is  
not removed immediately it can cause  
irreparable damage to the ceramic  
glass surface. Which is not covered by  
the guarantee.  
When the surface has cooled, wipe  
over with a damp cloth and Vitroclen.  
Heat Controls  
Heat Zone Setting Chart  
Function Examples  
The cooking zones regulate the heating capacity of  
the cooking zones.  
The control knobs for the cooking zones can be  
turned to the left and to the right to desired  
position.  
OFF  
0
Keeping warm,  
gentle heating,  
beating or melting  
Small amounts of  
hotpot, sauce,  
butter or chocolate  
1
2
1
= minimum setting  
10 = maximum setting  
= OFF  
Swelling, defrosting  
Rice, spinach  
3
4
0
Frying without crust  
Omelette, fried  
eggs  
Simmering, swelling  
Vegetables, fruit  
with little liquid,  
farinaceous  
After use make sure that the appliance is  
switched off by ensuring that all control  
knobs are set to 0.  
5
product  
Potatoes, stews,  
soups, sauces  
Boiling  
Frying  
6
7
8
Schnitzel, cutlets,  
meatballs, fish  
fillets in deep fat.  
Potato fritters,  
pancakes, fried  
eggs  
Baking  
Quick frying  
Parboiling, lightly  
frying  
the switch back  
to an appropriate  
setting  
9
10  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Residual Heat indicator  
Each cooking zone is related to one indicator. The  
warning lamp illuminates when the surface of the  
corresponding cooking zone reaches a  
temperature which could cause burns.  
The indicator remains illuminated after the area  
heated has been switched off as long as the  
residual heat of the corresponding cooking zone  
could cause burns.  
The light will go out when the temperature falls  
below 60°C.  
Saucepans and frying pans.  
Saucepans and frying pans should not be smaller  
than the cooking zone, and preferably not more  
that 10-15 mm larger than the cooking zone.  
The bases should always be clean and dry. Cook  
with a lid in place.  
Always using cooking and frying utensils with  
smooth, flat bottoms. Bases with burrs and sharp  
edges will scratch the ceramic glass surface.  
Scratches can also be caused by grains of sand  
(e.g. originating from washed vegetables), drawn  
over the cooking surface with the pan, or by burrs  
and rims on the base of pans.  
To avoid scratching or damaging the ceramic  
glass surface, pots and pans should be moved  
on the hob by lifting them and not by sliding.  
Utensils with aluminium and copper bases can  
leave behind metallic discolouration which can only  
be removed with difficulty and sometimes not at all.  
When cold, pan bases normally curve slightly  
inwards by approx. 0.1-0.5 mm (concave). In no  
case should they curve outwards (convex).  
Follow any guidelines provided by the saucepan  
manufacturer. Ensure that they are recommended  
for use on ceramic hobs.  
Energy Consumption  
To save energy, you should…  
Switch off the cooking zone a few minutes  
before the end of the cooking time, in order to  
make use of the residual heat.  
Only use cooking and frying utensils with flat  
smooth bases.  
Use the residual heat of the cooking zone for  
keeping food warm, or for. melting.  
Position pots and pans centrally on the cooking  
zone  
Place pots and pans in position before switching  
on the cooking zone.  
Wherever possible, cover pots and pans with a  
lid.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before cleaning, make sure that the hob is cool and  
disconnected from the power supply.  
Never use aggressive or abrasive agents,  
such as oven sprays, stain or rust  
removers, scouring powder, or sponges  
with an abrasive effect.  
Special cleaning agents such as Vitroclen and  
ceramic glass scrapers are available from  
department stores and electrical specialists.  
Cleaning after each use  
Slight, non-burnt soiling can be wiped off with a  
damp cloth.  
Burnt soiling has to be removed with a scraper.  
Afterwards wipe off the ceramic glass surface  
with a damp cloth and Vitroclen.  
Stain removal  
Light metallic stains (aluminium residues) can  
be removed from the cooking zone with a  
ceramic hob cleaning agent such as Vitroclen.  
Sugar solutions, food stuffs with a high sugar  
content, plastics, or kitchen foil must be  
removed immediately with a scraper. If this type  
of soilage is not removed immediately it can  
cause irreparable damage to the ceramic glass  
surface. When the surface has cooled wipe  
over with a damp cloth and Vitroclen.  
Before using any detergent or cleaning agent on  
the ceramic glass surface, ensure they are  
recommended for use on ceramic hobs.  
Do not apply any cleaning agents to hot cooking  
zones. Ensure that any residues are wiped off  
before the cooking zones are used again.  
Special Problems  
when a chemical cleansing agent is not  
Use a glass scraper to aid cleaning.  
sufficient.  
when dark stains have appeared.  
If cleaning with a glass scraper and Vitroclen does  
not help, the décor has been cleaned with an  
unsuitable cleaning agent or scoured by rough  
ban bases.  
when metallic discolouration appears on the  
cooking surface.  
The cleansing agents that were used were for the  
most part unsuitable. The discolouration can only  
be removed with difficulty using Vitroclen.  
These flaws are caused by scratching or melted  
objects and cannot be removed, however, this  
does not reduce the performance of the hob.  
when the surface shows scratches or hollows.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
If your hob is not functioning correctly please carry  
out the following checks before calling out an  
engineer.  
Important: If you call out an engineer to a fault  
listed below, or to repair a fault caused by incorrect  
use or installation, a charge will be made even if  
the appliance is under guarantee.  
Symptom  
Possible Solution  
The cooking zones do not function.  
Check the mains has not failed.  
Check a power level has been selected.  
The cooking zone may have only been switched  
on for a short while, and is therefore below  
60°C.  
After switching off a cooking zone the residual  
heat indicator is not illuminated.  
A buzzing is heard when a cooking zone is first  
switched on.  
Discolouration appear in the cooking zone.  
This is not a fault, the buzzing will disappear as  
the zone heats up.  
This is probably the result of burned of remnants  
that have not been removed regularly. They will not  
affect the function of the hob.  
If after carrying out the above checks there is still a fault, contact your local Zanussi Service Force Centre.  
In the event of your appliance requiring service, or  
if you wish to purchase spare parts, please contact  
your local Zanussi Service Force Centre by  
Customer Care  
telephoning:-  
For general enquiries concerning your Zanussi  
appliance or for further information on Zanussi  
products, please contact our Customer Care  
Department by letter or telephone at the address  
08705 929929  
below or visit our website at www.zanussi.co.uk  
Your telephone call will be automatically routed to  
the Service Force Centre covering your post code  
area. The addresses are listed on the following  
pages.  
Before calling out an engineer, please ensure you  
have read the details under the heading  
Something Not Working.”  
Customer Care Department  
Zanussi  
55-77 High Street  
Slough  
Berkshire  
SL1 1DZ  
08705 727727 (*)  
When you contact the Service Force Centre you  
will need to give the following details:  
* calls to this number may be recorded for training  
purposes  
1. Your name, address and post code  
2. Your telephone number  
3. Clear and concise details of the fault  
4. The model and serial number of the appliance  
(found on the rating plate)  
5. The purchase date  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
We Zanussi undertake that if within 24 months of the date of the purchase this Zanussi appliance  
or any part thereof is proved to be defective by reason only of faulty workmanship or materials,  
the company will, at our option repair or replace the same FREE OF CHARGE for labour,  
materials or carriage on condition that:  
The appliance has been correctly installed and used only on the electrical supply stated on the  
rating plate.  
The appliance has been used for normal domestic purposes only, and in accordance with the  
manufacturers instructions.  
The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any  
person not authorised by us.  
All service work under this guarantee must be undertaken by a Zanussi Service Force Centre.  
Any appliance or defective part replaced shall become the Companys property.  
Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available  
outside these hours in which case a premium will be charged.  
EXCLUSIONS  
This Guarantee does not cover:  
Damage or calls resulting from transportation, improper use or neglect, the replacement of any  
light bulbs or removable parts of glass or plastic.  
Costs incurred for calls to put right an appliance improperly installed or calls to appliances  
outside the United Kingdom.  
Appliances found to be in use within a commercial environment, plus those which are the subject  
of rental agreements.  
Products of Zanussi manufacture which are not marketed by Zanussi.  
This guarantee is in addition to your statutory and legal rights.  
ZANUSSI EUROPEAN GUARANTEE  
If you should move to another country within Europe then your guarantee moves with you to your  
new home subject to the following qualifications:  
The guarantee starts from the date you first purchased your product.  
The guarantee is for the same period and to the same extent for labour and parts as exists in  
the new country of use for this brand or range of products.  
This guarantee relates to you and cannot be transferred to another user.  
Your new home is within the European Community (EC) or European Free Trade Area  
The product is installed and used in accordance with our instructions and is only used  
domestically, i.e. a normal household.  
The product is installed taking into account regulations in your new country.  
Before you move please contact your nearest Customer Care Centre, list below, to give them  
details of your new home. They will then ensure that the local Service Organisation is aware of  
your move and able to look after you and your appliances.  
France  
Germany  
Italy  
Sweden  
UK  
Senlis  
+33 (0)3 44 62 29 29  
+49 (0)800 234 7378  
+39 (0)0434 39 4700  
+46 (0)8 672 5390  
Nurenberg  
Pordenone  
Stockholm  
Slough  
+44 (0)1753 219897  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
To contact your local Service Force Centre telephone 08705 929 929  
ISLE OF LEWIS  
ND Macleod  
16 James Street  
Stornoway  
CHANNEL ISLANDS  
NORTH EAST  
GUERNSEY  
JERSEY  
Guernsey Electricity  
PO Box 4  
Isle of Lewis PA87 2QW  
Vale, Guernsey  
Channel Islands GY1 3AD  
GATESHEAD  
GRIMSBY  
HULL  
Unit 356a  
Dukesway Court  
Dukesway  
KELSO  
2, 6 & 8 Woodmarket  
Kelso  
Borders  
Jersey Electricity Company  
Haut De L’orme  
Rue De Haut De L’orme  
Trinity  
Jersey  
Channel Islands JE3 5FG  
Gateshead NE11 0BH  
TD5 7AX  
15 Hainton Avenue  
Grimsby  
N. E. Lincs  
ORKNEY  
PERTH  
7 King Street  
Kirkwall  
Orkney  
DN32 9AS  
Unit 1  
KW15 1JF  
Boulevard Industrial Estate  
Hull  
HU3 4AY  
SCOTLAND  
Scottish Hydro Electric  
Central Warehouse  
Inveralmond  
ABERDEEN  
54 Claremont Street  
Aberdeen AB10 6RA  
LEEDS  
64-66 Cross Gates Road  
Cross Gates  
Leeds  
(OWN SALES)  
SHETLAND  
Perth PH1 3AF  
AUCHTERMUCHTY 33a Burnside  
Auchtermuchty  
3-4 Carlton Place  
Lerwick  
Shetland  
LS15 7YS  
Fife KY14 7AJ  
NEWTON AYCLIFFE Unit 23  
Northfield Way  
(OWN SALES)  
SHETLAND  
ZE1 0PW  
BLANTYRE  
Unit 5  
Block 2  
Auchenraith Ind. Estate  
Rosendale Way  
Blantyre G72 0NJ  
Aycliffe Industrial Park  
Newton Aycliffe  
DL5 6EJ  
Bolts Shetland  
26 North Road  
Lerwick  
(OWN SALES)  
WHALSAY  
Shetland ZE1 0PE  
SHEFFIELD  
Pennine House  
Roman Ridge Road  
Sheffield  
DUMFRIES  
DUNOON  
93 Irish Street  
Dumfries  
DG1 2 PQ  
Leask Electrical  
Harisdale  
Symbister, Whalsay  
S9 1GB  
(OWN SALES)  
Shetland ZE2 9AA  
7 Hill Street  
Dunoon  
Argyll  
NORTH WEST  
PA23 7AL  
BIRKENHEAD  
CARLISLE  
1 Kelvin Park  
Dock Road  
Birkenhead  
CH41 1LT  
NORTHERN IRELAND  
EDINBURGH  
Unit 12  
BELFAST  
Owenmore House  
Kilwee Business Park  
Dunmurry  
Belfast  
BT17 0HD  
Dumbryden Ind. Estate  
2 Dumbryden Road  
Edinburgh  
Unit 7  
EH14 2AB  
James Street Workshops  
James Street  
Carlisle  
GLASGOW  
Unit 4  
Cumbria  
CA2 5AH  
WALES  
Wellington Road  
Bishopriggs  
Glasgow G64 2SA  
ISLE OF MAN  
BOLTON  
South Quay Ind. Estate  
Douglas  
Isle of Man  
CARDIFF  
CLYWD  
DYFED  
Unit 4  
Guardian Industrial Estate  
Clydesmuir Road  
Cardiff  
INVERNESS  
Unit 3BI  
Smithton Ind. Estate  
Smithton  
IM1 5AT  
CF2 2QS  
Unit B  
Inverness IV2 7WL  
Central Industrial Estate  
St Marks Street  
Bolton  
Unit 6-7 Coed Parc  
Abergele Road  
Rhuddlan  
Clwyd  
LL18 5UG  
ISLE OF ARRAN  
ISLE OF BARRA  
ISLES OF BUTE  
R Haggerty  
Bruach  
Blackwaterfoot  
Isle of Arran  
BL3 6NR  
PRESTON  
Unit 250  
Dawson Place  
Bamber Bridge  
Preston  
Unit 9  
J Zerfah  
244 Bruernish  
Isle of Barra  
Western Islands HS9 5QY  
St. Clears Business Park  
Tenby Road  
St. Clears  
Carmarthen  
SA33 4JW  
Lancashire PR5 8AL  
STOCKPORT  
Unit 20 Haigh Park  
Haigh Avenue  
Stockport  
Walker Engineering  
Glenmhor  
Upper Serpentine Road  
Rothesay  
SK4 1QR  
OSWESTRY  
Plas Ffynnon Warehouse  
Middleton Road  
Oswestry  
Isle of Bute PA20 9EH  
SY11 2PP  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To contact your local Service Force Centre telephone 08705 929 929  
MIDLANDS  
LONDON & EAST ANGLIA  
SOUTH EAST  
BIRMINGHAM  
66 Birch Road East  
Wyrley Trading Estate  
Witton  
BECKENHAM  
11a Gardner Ind. Estate  
Kent House Lane  
Beckenham  
ASHFORD  
Unit 2  
Bridge Road Business  
Centre  
Birmingham  
B6 7DB  
Kent BR3 1QZ  
Bridge Road  
Ashford  
Kent TN23 1BB  
CHELMSFORD  
COLINDALE  
Hanbury Road  
Widford Ind. Estate  
Chelmsford  
Essex  
BOURNE  
Pinfold Road  
Bourne  
PE10 9HT  
FLEET  
Unit 1  
Redfields Ind. Estate  
Church Crookham  
Fleet  
CM12 3AE  
BRIDGNORTH  
68 St. Marys Street  
Bridgnorth  
Unit 14  
Hampshire GU13 0RD  
Shropshire  
WV16 4DR  
Capitol Park  
Capitol Way  
Colindale  
HAYWARDS  
HEATH  
21-25 Bridge Road  
Haywards Heath  
GLOUCESTER  
HEREFORD  
101 Rycroft Street  
Gloucester  
GL1 4NB  
Sussex RH16 1UA  
London NW9 0EQ  
ELTHAM  
194 Court Road  
Mottingham  
Eltham  
Units 3 & 4  
Bank Buildings  
Cattle market  
Hereford  
TONBRIDGE  
Unit 30  
Deacon Trading Estate  
Morley Road  
Tonbridge  
London SE9 4EW  
ENFIELD  
284 Alma Road  
Enfield  
HE4 9HX  
TN9 1RA  
London  
EN3 7BB  
HIGHAM FERRERS 30 High Street  
Higham Ferrers  
Northants  
NN10 8PL  
GRAVESEND  
Unit B4  
Imperial Business Estate  
West Mill  
Gravesend  
Kent  
DA11 0DL  
SOUTH WEST  
BARNSTAPLE  
Main Road  
Fremington  
Barnstaple  
North Devon EX31 2NT  
ILKESTON  
Unit 2  
Furnace Road  
Ilkeston DE7 5EP  
LEICESTER  
Unit 7  
IPSWICH  
Unit 6C  
Oaks Industrial Estate  
Coventry Road  
Narborough  
Leicestershire  
LE9 5GF  
Elton Park Business Centre  
Hadleigh Road  
Ipswich  
BOURNEMOUTH 63-65 Curzon Road  
Bournemouth  
Dorset  
BH1 4PW  
IP2 0DD  
LETCHWORTH  
LONDON  
16-17 Woodside Ind. Park  
Works Road  
Letchworth  
Herts  
SG6 1LA  
BRIDGEWATER  
BRISTOL  
6 Herswell Business Park  
Salmon Parade  
Bridgwater  
LINCOLN  
Unit 8  
Clifton Street  
Stone Field Park  
Lincoln  
Somerset TA6 5PY  
LN5 8LQ  
11 Eldon Way  
Eldonwall Trading Estate  
Bristol  
2 - 4 Royal Lane  
Yiewsley  
West Drayton  
Middlesex  
NEWCASTLE  
UNDER LYME  
18-21 Croft Road  
Brampton Ind. Estate  
Newcastle under Lyme  
Staffordshire  
BS4 3QQ  
UB7 8DL  
EMSWORTH  
ISLE OF WIGHT  
266 Main Road  
Southbourne  
Emsworth  
ST5 0TW  
MAIDENHEAD  
MOLESEY  
Reform Road  
Maidenhead  
Berkshire  
PO10 8JL  
REDDITCH  
13 Thornhill Road  
North Moons Moat  
Redditch  
Worcestershire  
B98 9ND  
SL6 8BY  
Unit 8  
Enterprise Court  
Ryde Business Park  
Ryde  
10 Island Farm Avenue  
West Molesey  
Surrey  
Isle of Wight PO33 1DB  
TAMWORTH  
Unit 3  
KT8 2UZ  
Sterling Park  
Claymore  
Tamworth  
B77 5DQ  
NEWTON ABBOT Unit 2  
Zealley Ind. Estate  
NEWBURY  
9 Pipers Court  
Berkshire Drive  
Thatcham  
Berkshire  
RG19 4ER  
Kingsteignton  
Newton Abbot  
TQ12 3TD  
WORCESTER  
Units 1 & 2  
Northbrooks Close  
Gregorys Mill Ind. Estate  
Worcester  
REDRUTH  
Unit 7D  
NORWICH  
SUNBURY  
2b Trafalgar Street  
Norwich  
NR1 3HN  
Pool Ind. Estate  
Druids Road  
Redruth  
WR3 8BP  
Cornwall TR15 3RH  
Unit 1a  
The Summit  
Hanworth Road  
Sunbury on Thames  
TW16 5DB  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Please examine the appliance for any damage. If  
the appliance is damaged contact your retailer  
before the appliance is connected.  
Measurement of:  
Worktop Opening Appliance:  
Width:  
Width:  
Depth:  
560mm  
490mm  
572mm  
502mm  
49mm  
Depth:  
Height:  
Please keep packaging away from children and  
dispose of with due regard for the environment.  
Corner Radius:5mm  
Voltage:  
Total Connection Load: 5.8 kW  
AC 230 V 50 Hz/60Hz  
Important Safety Requirements  
The hob must be installed by a qualified  
electrician / competent person.  
Damaged hobs with cracks or breakages in the  
ceramic glass must not be connected to the  
electrical supply.  
This hob must be installed in accordance with  
the IEE Wiring Regulations (Current Edition).  
Detailed recommendations are contained in the  
following British Standards Codes of Practice:  
B.S.6172 / B.S.5440 Part 2 and B.S.6891 Current  
Editions.  
Disposal  
All packaging parts are recyclable, wooden  
strips are non-treated, foils and hard foam  
are marked. Packaging materials and old  
appliance should be disposed of at  
authorised disposal sites.  
Installation into the kitchen worktop  
Protection against accidental contact according  
to the regulations set by VDE or other local  
authorities and EN60335 must be ensured by the  
correct installation of the appliance. The same  
refers to the back of the appliance which, even in  
the case of built-in solutions away from the wall,  
must not be freely accessible.  
Built-in cupboards have to be located and  
fastened so that they are stable.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When building in ceramic glass cooking areas the  
front cross-rail of the build-in cupboard must be  
removed in order to have the heat radiating off  
escape without any obstacles.  
of need for service, and may damage the worktop if  
removing the hob.  
5 holes in the bottom of the build-in case are  
provided for the screws of the fitting plates.  
The space under the hob unit must be closed at all  
sides in a way that the lower side of the cooking  
area is no longer accessible.  
At first screw on the fitting plates by a screwdriver  
and afterwards regularly tighten the plates  
alternatively and diagonally offset, until the frame of  
the cooking area is perfectly laying on the worktop.  
The distance from the hob to the furniture part  
under the hob must at least amount to 20 mm. If  
needed, please fix an insulation. Drawers must not  
be located under a hotplate.  
Over-tightening must be avoided! Electric  
screwdrivers or pusher airscrews must be  
exclusively used with slip clutch (setting value 1 --  
1.1 Nm).  
The distance from the hob to a high cupboard  
beside right or left must at least amount 55 mm, to  
the back wall at least amount 55 mm.  
With regard to the protection against overheating of  
surrounding furniture surfaces this appliance  
corresponds to type Y (EN 60335). This appliance  
or the built-in cupboard for the appliance  
respectively may be located with the rear wall and  
one side wall to whatever high walls or furniture  
respectively and with the other side to another  
appliance or furniture of the same height as this  
appliance.  
Built-in dimensions  
The opening in the worktop must correspond to  
commercial dimensions. The hints required are  
given in the dimension sketch.  
Built-in  
Cut out the worktop acc. to prescribed cutout size.  
The tolerance sizes must not be exceeded. Do  
precisely saw at the mark line. Recommendation:  
Mark the cut-out with a steel needle. Glue  
something on the line in order to avoid shattering of  
the coat when cutting.  
With tile-coated worktop areas the slits in the  
supporting area for the cooking area must be filled  
up completely.  
Clean the worktop in the cutout area.  
From the top lay the cooking area into the cutout,  
adjust concentrically and firmly press down.  
Check the sealing in the supporting frame for  
perfect seating and resting without a gap. Please  
do not apply additional silicone sealing material,  
the closure will make it harder to dismantle in case  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Electrical Connection  
The mains connection must be carried out by an  
expert electrician. The VDE-regulations and the  
valid prescriptions by the local power supply boards  
have to be compiled with.  
Prior to connection it should be checked whether  
the voltage stated on the type plate - i.e. the  
nominal voltage of the appliance and of the  
oven/control box is identical with the prevailing  
mains voltage. The rating plate is located on the  
hobs bottom.  
The heating element voltage amounts to 230 V ~ .  
The appliance will also perfectly perform with the  
former mains voltage of 220 V ~ .  
The mains connection must be carried out in a way  
that a double-pole switch is used with a contact  
opening of at least 3 mm, and disconnected by LS-  
automatism, earth-leakage circuit-breaker or fuse.  
A wire of type H05VV-F or of higher rating is to be  
used as supply cable.  
The mains terminal is located in the bottom of the  
appliance behind a covering slide. It can be opened  
with a screw driver (pic.).  
According to the existing mains voltage, the  
appliance must be connected in accordance with  
the appropriate connections as shown. The bridges  
of the terminal board are to be set in the marked  
position.  
UK Only  
The protective conductor is to be connected to  
terminal . The protective conductor must be longer  
than live leads.  
The cable connections have to be established  
as prescribed and the terminal screws be firmly  
tightened.  
Afterwards the supply cable has to be secured by  
strain relief device and the covering slide must be  
closed by firmly pressing down.  
Prior to first use remove any existing labels and  
protective foils from the ceramic glass plate or the  
frame of the hob.  
After connection to the power supply check each  
cooking zone by briefly switching it the maximum  
setting (10).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
© Electrolux Household Appliances Limited 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Weslo Treadmill WLTL01530 User Manual
Westinghouse Flat Panel Television EW32S5UW User Manual
Whirlpool Washer Dryer 8TLSQ8533LT1 User Manual
Whirlpool Washer WTW6200SW0 User Manual
Xerox Copier 701P40211 User Manual
Xerox Copier 4250 User Manual
Zanussi Dishwasher 505051 User Manual
Zanussi Refrigerator 102237 User Manual
Zanussi Ventilation Hood ZHC 950 User Manual
Zenoah Paint Sprayer RS5B User Manual