DISHWASHER
DE 6554
Instruction Book
152968 45/1
UK
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety instructions
It is most important that this instruction book should be retained with the appliance for future reference. Should the
appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that
the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the
relevant safety information.
This information has been provided in the interest of your safety. You MUST read it carefully before installing or using the
appliance.
Installation
Disposal
G Check your dishwasher for any transport damage. Never
Dispose of the dishwasher packaging material correctly.
connect a damaged machine. If your dishwasher is
All packaging materials can be recycled.
damaged, you should contact your supplier.
Plastic parts are marked with standard international
abbreviations:
G For safety reasons it is dangerous to alter the specifications
or attempt to modify this product in any way.
>PE<
>PS<
for polyethylene, e.g. sheet wrapping material.
for polystyrene, e.g. padding material (always CFC-
free).
G Any electrical and plumbing work required to install this
appliance should be carried out by a qualified and
competent person.
>POM< for polyoxymethylene, e.g. plastic clips.
G Care must be taken to ensure that the appliance does not
Cardboard packaging is manufactured from recycled paper
and should be deposited in the waste paper collection for
recycling.
As and when you cease to use your dishwasher and withdraw
it from service, your should render it unserviceable before
having it disposed of.
stand on the electrical supply cable.
G The sides of the dishwasher must never be drilled to
prevent damage to hydraulic components.
Child safety
G This appliance is designed to be operated by adults.
Warning! Children at play could lock themselves in your
dishwasher or otherwise endanger their lives. Therefore cut off
the power supply cable and make the door closing device
unusable to prevent children from being trapped inside.
G Children should not be allowed to tamper with the controls
or play with the product.
For the disposing of the appliance please take it to a recycling
centre or to your dealer who will, for a small contribution to the
costs, dispose it for you.
G Packaging parts may be dangerous for children, who could
even be suffocated! You should therefore keep all
packaging well away from children.
G The water in your dishwasher is not for drinking. Detergent
residues may still be present in your machine. Keep
children well away from your dishwasher when the door is
open.
Economical and
G Keep all detergents in a safe place out of children's reach.
ecological dishwashing
G Ensure that the water softener is correctly adjusted.
Your dishwasher in day-to-day use
G Items that are contaminated by petrol, paint, steel or iron
debris, corrosive, acidic or alkaline chemicals must not be
washed in this dishwasher.
G Do not pre-wash under running water.
G Select the wash programme to suit the nature and degree of
the soiling on the dishes.
G Do not use more detergent, special salt and rinse aid than is
recommended in these operating instructions and by the
manufacturer of the respective product.
G Under no circumstances should you open the door whilst
the appliance is in operation, especially during the washing
phase, hot water may escape. However, if the door is
opened, a safety device ensures that the machine stops.
G Only use products (detergent, salt and rinse aid) specifically
designed for use in dishwashers.
G Long bladed knives stored in an upright position are a
potential hazard.
G Long and/or sharp items of cutlery such as carving knives
must be positioned horizontally in the upper basket.
G When finishing loading or unloading close the door, as an
open door can be a hazard.
G Do not sit or stand on the open door.
G Isolate the appliance from the power supply and turn off the
water supply after use.
G This product should be serviced by an authorised service
engineer, and only genuine spare parts should be used.
G Under no circumstances should you attempt to repair the
machine yourself. Repairs carried out by inexperienced
persons may cause injury or serious malfunctioning.
Contact your local Service Force Centre. Always insist on
genuine spare parts.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the appliance
1. Upper basket stop
2. Water hardness switch
3. Salt container
4. Detergent dispenser (type A / type B)
5. Control panel
6. Rating plate
7. Rinse aid dispenser (type A / type B)
8. Filters
9. Lower spray arm
10. Upper spray arm
11. Upper basket
12. Worktop
IN148
The control panel
Function push buttons: in addition to the dishwashing
programme selected, the following functions can also be set
with the help of these buttons.
Phase indicator lights: have the following meanings:
WASH illuminates when the washing phase is running
Function push button 1
Function push button 2
Set water softener
DRY
END
illuminates when the drying phase is running
Activate/deactivate rinse aid
indicator light
illuminates when the washing programme has
ended
As soon as you select a washing programme, the phase
indicator lights for that programme will start flashing.
Indicator lights: have the following meanings:
SALT
salt refilling indicator light, illuminates when
the salt has run out
As the programme starts, the phase indicator lights turn off
except for the indicator light of the phase in progress which will
remain lit with a static light.
RINSE-AID rinse aid refilling indicator light, illuminates
when the rinse aid has run out
The salt and rinse aid indicator lights are never illuminated
while a washing programme is running even if filling with salt
and rinse aid is necessary.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Prior to using for the first time
Before using your dishwasher for the first time:
b) Setting electronically
(The dishwasher must be switched off)
1. Ensure that the electrical and water connections comply
with the installation instructions.
The dishwasher is factory set at level 3.
If it’s necessary to set a new level, proceed as follows.
2. Remove all packaging from inside the appliance.
3. Set the water softener.
1. Press function push buttons 1 and 2 simultaneously.
4. Pour 1 litre of water inside the salt container and then fill
with salt.
2. While keeping the function push buttons 1 and 2 pressed
switch on the dishwasher by pressing the On/Off push
button.
5. Fill the rinse aid dispenser.
The On/Off indicator light comes on.
At the same time, the indicator lights of function push
buttons 1 and 2 start flashing.
Setting the water softener
The dishwasher is equipped with a water softener designed to
remove minerals and salts from the water supply, which would
have a detrimental or adverse effect on the operation of the
appliance.
3. Press function push button 1, the indicator light of function
push button 2 turns off, while the indicator light of function
push button 1 remains fixed for about 5 seconds, after this it
starts flashing indicating the current level of the water
softener.
The higher the content of these salts, the harder your water is.
Water hardness is measured in equivalent scales, Clarke
degrees, French degrees and PPM (parts per Million).
The current level is indicated by the number of flashes
made by the indicator light of function push button 1, that
alternates 5 seconds off with a number of flashes, this for
about 60 seconds.
The softener should be adjusted according to the hardness of
the water in your area. Your local Water Authority can advise
you on the hardness of the water in your area.
The water softener must be set in both ways: manually, using
the water hardness switch and electronically, using the function
push buttons on the control panel.
Example:
1 flash
2 flashes = level 2
3 flashes = level 3
4 flashes = level 4
5 flashes = level 5
=
level 1
If your water is level 1 it is already soft and therefore there
is no need to use salt.
a) Setting manually
4. To change the level, press function push button 1. Each
time the push button is pressed the level changes.
1. Open the dishwasher door.
Examples:
2. Remove the lower basket from the dishwasher.
if the current level is 3, by pressing function push button 1
once, level 4 is selected.
if the current level is 5, by pressing function push button 1
once, level 1 is selected.
3. Turn the water hardness switch to position 1 or 2 (see
table).
4. Replace the lower basket.
The dishwasher is factory set
at position 2.
The indicator light of function push button 1 remains off for
about 5 seconds after which it starts flashing indicating the
new level selected.
5. To memorise the new level, switch off the dishwasher by
pressing the On/Off push button.
AA07
Water hardness
Adjusting the water hardness
French
degrees
(°TH)
PPM
Use of
Clarke
Number of
setting
(parts per million)
degrees
salt
flashes
manually
electronically
level 5
71 - 90
51 - 70
31 - 50
8 - 30
< 8
50 - 63
36 - 49
22 - 35
6 - 21
< 6
2
2
2
1
1
701 - 900
501 - 700
301 - 500
80 - 300
< 80
5
4
3
2
1
yes
yes
yes
yes
no
level 4
level 3
level 2
level 1
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Filling with salt
Rinse aid
Rinse aid is automatically added during the last rinse, ensuring
thorough rinsing, and spot and streak free drying.
The dispenser, which is positioned inside the door, holds about
110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing
programmes, depending upon the dosage setting.
Only use salt specifically designed for use in
dishwashers.
All other types of salt not specifically designed for use in
a dishwasher, especially table salt, will damage the water
softener.
Only fill with salt just before starting one of the complete
washing programmes.
This will prevent any grains of salt or salty water, which
may have been spilt, remaining on the bottom of the
machine for any period of time, which may cause
corrosion.
Filling with rinse aid
(Rinse aid dispenser type A)
1. Open the container by pressing the release button (A).
2. Add the rinse aid until the container is completely full. The
maximum level for filling is indicated by "max".
To fill:
1. Open the door, remove the lower basket and unscrew the
cap of the salt container by turning it anticlockwise.
2. Pour 1 litre of water inside the container (this is necessary
only before filling with salt for the first time).
3. Using the funnel provided,
pour in the salt until the
container is full.
SALE
T
ZOUT
SAL
SALZ
SEL
BR07
BR14
4. Replace the cap making
sure that there is no trace
of salt on the screw thread
or on the gasket.
Ensure that the lid is closed after every refill.
5. Screw on the cap tightly
turning it clockwise until it
stops with a click.
Adjusting the dose
According to the finish and drying results obtained, adjust the
dose of rinse aid by means of the 6 position selector (position
1 minimum dosage, position 6 maximum dosage).
SR14
The salt container will require topping up periodically. You are
reminded of this by the salt indicator light on the control panel
which comes on when the salt has finished.
Increase the dose if there are drops of water or lime spots on
the dishes after washing.
The dose is factory set in
position 4.
The salt indicator light on the control panel can remain
illuminated for 2-6 hours after the salt has been
replenished, assuming the dishwasher remains switched
on. If you are using salts that take longer to dissolve then
this can take longer. The function of the machine is not
affected.
Reduce it if there are sticky
whitish streaks on the dishes.
Do not worry if water over flows from the unit when filling with
salt, this is quite normal.
BR09
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Top up the rinse aid when the rinse aid indicator light on the
control panel illuminates.
Filling with rinse aid
(Rinse aid dispenser type B)
It is possible to deactivate the rinse aid indicator light (see
following instructions).
1. Open the container by turning the lid (A) anticlockwise.
2. Add the rinse aid until the container is completely full. The
maximum level for filling is indicated by "max".
To deactivate the rinse aid indicator
light proceed as follows:
(The dishwasher must be switched off)
1. Press function push buttons 1 and 2 simultaneously.
2. While keeping the function push buttons 1 and 2 pressed
switch on the dishwasher by pressing the On/Off push
button.
The On/Off indicator light comes on.
At the same time, the indicator lights of function push
buttons 1 and 2 start flashing.
BR01
BR13
Ensure that the lid is closed after every refill.
3. Press function push button 2, the corresponding indicator
light keeps flashing while the indicator light of function push
button 1 turns off. At the same time the rinse aid indicator
light starts to flash.
Adjusting the dose
According to the finish and drying results obtained, adjust the
dose of rinse aid by means of the 6 position selector (C)
(position 1 minimum dosage, position 6 maximum dosage).
4. Press function push button 2 again, the rinse aid indicator
light turns off, this means that the rinse aid indicator light
has been deactivated.
Increase the dose if there are drops of water or lime spots on
the dishes after washing.
5. To memorise the operation, switch off the dishwasher by
pressing the On/Off push button.
The dose is factory set in
position 5.
Reduce it if there are sticky
whitish streaks on the
dishes.
To reactivate the rinse aid indicator light follow the same
process until the rinse aid indicator light starts to flash.
BR02
Clean up any rinse aid spilt during filling with an
absorbent cloth to avoid excess foaming during the next
wash.
Only use branded rinse aid for dishwashers. Never fill the
rinse aid dispenser with any other substances (e.g.
dishwasher cleaning agent, liquid detergent). This would
damage the appliance.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
In daily use
G Check if it’s necessary to refill with special salt or rinse aid
G Load cutlery and dishes into the dishwasher.
G Fill with dishwasher detergent .
Loading cutlery and dishes
Sponges, household cloths and any object that can
absorb water may not be washed in the dishwasher.
G Select a wash programme suitable for the cutlery and
G Before loading the dishes, you should:
- Remove large left-overs.
dishes.
G Start the wash programme.
- Soften remnants of burnt food in pans
G When loading the dishes and cutlery, please note:
- Dishes and cutlery must not impede the rotation of the
spray arms .
- Load hollow items such as cups, glasses, pans, etc. with
the opening downwards so that water cannot collect in the
container or a deep base.
- Dishes and items of cutlery must not lie inside one
another, or cover each other.
- To avoid damage to glasses, they must not touch.
- Lay small objects in the cutlery basket.
G Plastic items and pans with teflon have a tendency to
retain water drops; these items will not dry as well as
porcelain and steel items.
For washing in the dishwasher the following cutlery/dishes
are not suitable:
are of limited suitability:
- Cutlery with wooden, horn, china or
mother-of-pearl handles
- Only wash stoneware in the dishwasher if it is specifically
marked as being dishwasher-safe by the manufacturer.
- Plastic items that are not heat resistant
- Glazed patterns may fade if machine washed frequently
- Older cutlery with glued parts that is not
temperature resistant
- Silver and aluminium parts have a tendency to discolour
during washing. Left-overs, e.g. egg white, egg yolk and
mustard often cause discolouring and staining on silver.
Therefore always clean left-overs from silver immediately, if
it is not to be washed straight after use.
- Bonded cutlery items or dishes
- Pewter or copper items
- Lead crystal glass
- Some types of glass can become dull after a large number
of washes
- Steel items subject to rusting
- Wooden platters
- Items made from synthetic fibres
Open the door and slide out the baskets to load the dishes.
The cutlery basket
Long bladed knives stored in an upright position are a
potential hazard.
Long and/or sharp items of cutlery such as carving knives
must be positioned horizontally in the upper basket.
Take care when loading or unloading sharp items such as
knives.
The lower basket
The lower basket is designed to take saucepans, lids, plates,
salad bowls, cutlery etc.
Serving dishes and large lids should be arranged around the
edge of the basket, ensuring that the spray arms can turn
freely.
Removable knife basket
Long and/or sharp items of cutlery such as carving knives must
be placed horizontally in the removable knife basket, which is
positioned at the rear of the upper basket.
UI89
UI53
UI90
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Cutlery should be placed in the removable cutlery basket with
the handles facing downwards. If the handles protrude from
the bottom of the basket, obstructing the lower spray arm, load
the cutlery with the handles facing upwards.
Adjusting the height of the upper basket
If washing very large plates you can load them in the lower
basket after moving the upper basket to the higher position.
Mix spoons with other cutlery to prevent them from sticking
together.
Maximum height of the dishes in
upper basket
lower basket
For best results we
recommend you to use the
cutlery grids provided (if the
size and dimensions of the
cutlery allow it).
With upper basket raised
With upper basket lowered
20 cm
24 cm
31 cm
27 cm
To move to the higher position proceed as
follows:
The cutlery basket is in two
parts which can be
1. Move the front runner stops (A) of the upper basket
separated to give greater
outwards and slide the basket out.
loading flexibility. To separate
UI63
the two parts, slide them
horizontally in opposite
directions and pull them
apart.
To reassemble, reverse the
procedure.
2. Refit the basket in the higher position and replace the stops
(A) in their original position.
When the basket is in the
higher position you will not
be able to use the cup
rack(s).
UI62
RC01
The upper basket
The upper basket is designed for plates (dessert plates,
saucers, dinner plates of up to 24 cm in diameter), salad
bowls, cups and glasses.
After loading your machine always close the door, as an
open door can be a hazard.
Arrange items on and underneath the cup racks so that water
can reach all surfaces.
Glasses with long stems can
be placed upside down in the
cup racks.
Light items (plastic bowls
etc.) must be loaded in the
upper basket and arranged
so they do not move.
US47
In case that plates are loaded in the upper
basket:
load them starting from the
rear positions of the
basket; tilting them slightly
forwards and avoiding the
front positions near the
door.
US71
Before closing the door, ensure that the spray arms can
rotate freely.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
For all programmes with prewash, an additional detergent
dose (5/10 g) must be placed into the WRD detergent
dispenser, located in the
Use of detergent
Only use detergents specifically designed for use in
dishwashers.
centre of the upper basket.
We recommend the use of Finish detergents.
This detergent will take effect
during the prewash phase
Using no more then the correct amount of detergent
contributes to reducing pollution.
Prior to the start of a wash programme (not for the "Rinse and
Hold" programme, that does not require the use of detergent).
The detergent is released during the washing phase.
Please observe the manufacturer’s dosing and storage
recommendations as stated on the detergent packaging.
DE13
Fill with detergent
(Detergent dispenser type A)
1. If the lid is closed: press release button (1).
The lid springs open.
2. Fill the detergent dispenser with detergent.
The marking indicates the dosing levels:
20 = approximately 20 g of detergent
30 = approximately 30 g of detergent
DE21
DE19
3. Close the lid and press until it locks in place.
Fill with detergent
(Detergent dispenser type B)
1. If the lid is closed: open the dispenser by pulling the catch
(D). The lid springs open.
2. Fill the detergent dispenser with detergent.
The marking indicates the dosing levels:
Min = approximately 15 g of detergent
Max = approximately 30 g of detergent
DE17
3. Close the lid and press until it locks in place.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Different kinds of detergent
Detergent tablets
Use of "3 in 1" combi detergents
Detergent tablets of different brands dissolve at different
speeds. For this reason some detergent tablets cannot
dissolve and develop their full cleaning power during short
programmes. Therefore please use long programmes when
using detergent tablets, to ensure the complete removal of
detergent residuals.
Do not place the tablets in the tub or in the cutlery basket
as this will result in poorer wash results. The tablets
should be placed in the detergent dispenser.
General advice
These products are detergents with integrated and combined
detergent/rinse-aid and salt functions.
1. Before using these products you should first check that the
water hardness in your supply is compatible with the use of
these products as per the detergent manufacturers (on the
product packaging).
2. These products should be strictly used according to the
detergent manufacturers instructions.
3. If you encounter problems when using 3 in 1 products for
the first time then please contact the detergent
manufacturers care line (the telephone number is given on
the product packaging).
Concentrated detergent
Based on their chemical composition, dishwasher detergents
can be split into two basic types:
- conventional, alkaline detergents with caustic components.
- low alkaline concentrated detergents with natural enzymes.
Special advice
The use of 50°C washing programmes in conjunction with
concentrated detergents reduces pollution and is good for your
dishes; these wash programmes are specially matched to the
dirt-dissolving properties of the enzymes in the concentrated
detergent. For this reason 50°C wash programmes in which
concentrated detergents are used can achieve the same
results that can otherwise only be achieved using 65°C
programmes.
When using combination 3 in 1 products select the lowest
possible setting for water hardness.
If you decide to turn back to the use of the standard detergent
system we advise that you:
G Refill both the salt container and rinse aid dispenser.
G Switch the water hardness setting to the highest possible
position and run a normal washing programme without a
load.
G Readjust the water hardness setting again according to the
hardness of the water in your area.
Combi detergents
If you are using dishwasher detergent that includes the rinse
aid function, this must be placed in the detergent compartment.
In this case the rinse aid compartment must be empty, in order
to avoid a double dosage and the rinse aid indicator light
deactivated.
If in the rinse aid compartment there is still rinse aid you must
wait until it has finished before using these kind of detergents.
For best results we recommend the use of Finish detergents, rinse aid and salt.
P OURING
PACK
EW
E
N
N
O
TI
C
L
B
A
U
O
D
L
I
Q
U
I
D
G
E
L
P
O
W
D
E
R
R
I
N
S
E
CONCENTRATED DISHWASHER DETERGENT
DE15
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing programmes
Programme
Degree of soil
and
Press the
programme
button
Cycle
description
(3) Consumption values
Programme duration
Energy
consumption
(in kWh)
Water
consumption
(in litres)
(in minutes)
type of load
Hot prewash
70°
INTENSIVE
WRD
Heavy soil.
Crockery, cutlery,
pots and pans
Main wash up to 70°C
2 warm rinses
1 hot rinse
Intensive 70°C
WRD
85 - 95
1,85 - 1,95
21 - 23
Drying
Cold prewash
Main wash up to 65°C
1 cold rinse
1 hot rinse
Drying
65°
NORMAL
Normal soil.
Crockery and cutlery
Normal 65°C
100 - 110
30
1,5 - 1,7
0,8
19 - 21
Fresh soil.
Crockery and cutlery
60°
QUICK
Main wash up to 60°C
1 hot rinse
(1) Quick 60°C
9
Cold prewash
Main wash up to 50°C
1 cold rinse
(2)
50°
ECONOMY
Normal soil.
Crockery and cutlery
Economy 50°
130 - 150
0,95 - 1,05
16 - 18
1 hot rinse
Drying
Any.
1 cold rinse (to avoid
food scraps from
sticking together).
Partial load (to be
completed later in
the day).
RINSE &
HOLD
12
0,1
4
Rinse and Hold
(1) Ideal for washing crockery and cutlery of breakfast and dinner (fresh soil).
Characterised by a duration of about 30 minutes and a washing temperature of 60°C.
The time value is approximate and depends on the pressure and the temperature of the water and also by the variations
of the power supply.
This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast
and dinner crockery and cutlery.
(2) Testing programme for EN 50242 (see "Hints for Test Centres"). This programme, developed for the use of detergents with
enzymes, allows you to achieve, with reduced consumption of energy the same cleaning results that would otherwise be
obtained only with the 65°C programmes and conventional detergents. To compensate the lower temperature, the duration of
washing and drying have been extended.
(3) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by
the variations of the power supply.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting a washing programme
1. Check that the baskets have been
loaded correctly and that the spray
arms can rotate freely
7. End of the washing programme
The dishwasher will automatically stop and the end of
programme phase indicator light will illuminate.
The indicator light of the programme just ended will
remain on.
The dishwasher has finished the programme only when
the end of programme indicator light (END) is illuminated.
If you do not wait for the end of the programme it will not
be possible to start a new programme until the previous
programme has been cancelled.
2. Turn on the water tap
3. Close the dishwasher door
(For instructions on how to cancel a programme see the
corresponding instructions).
If during the drying phase (DRY indicator light
4. Press the On/Off push button
illuminated) the dishwasher door is opened or the On/Off
push button is pressed, the running programme is
automatically cancelled and the machine returns to
setting mode (in this case it is possible to select a new
programme without cancelling the previous)
The On/Off indicator light will come on.
5. Setting and starting the programme
Switch off the dishwasher by pressing the On/Off push
button, the On/Off indicator light turns off.
Press the push button corresponding to the required
programme (see "Washing programmes" chart).
The indicator light corresponding to the programme
illuminates and the phase indicator lights foreseen for
that programme start flashing.
Open the door and wait a few minutes before removing
the dishes; in this way they will be cooler and the drying
will be improved.
It is possible to change the programme selection simply
pressing the push button of another programme within 6
seconds.
Water may appear on the sides and the door of the
dishwasher as the stainless steel will eventually become
cooler than the dishes.
Once the programme has started the phase indicator
lights will turn off except for the phase under way.
Unloading the dishwasher
Hot dishes are sensitive to knocks. The dishes should
therefore be allowed to cool down before removing from
the appliance.
Empty the lower basket first and then the upper one; this
will avoid water dripping from the upper basket onto the
dishes in the lower one.
6. Interrupting/cancelling a washing
programme in progress
Change or interrupt a washing programme in
progress ONLY if it’s absolutely necessary.
Attention! Hot steam may escape when the door is
opened. Open the door carefully.
When the washing programme has finished, it is
recommended that the dishwasher is unplugged and the
water tap turned off.
To interrupt a washing programme in
progress
a) Open the dishwasher door; the programme will stop.
Close the door; the programme will start from the
point in which it was interrupted.
b) Press the On/Off push button (in this case all the
indicator lights turn off). Press the On/Off push button
again; the programme will start from the point in
which it was interrupted.
To cancel a washing programme in
progress
A programme in progress can be cancelled at any time.
Press for about 3 seconds the push button of the running
programme until all indicator lights are off.
Only the On/Off indicator light will remain illuminated.
It is now possible to select a new washing programme.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and cleaning
Clean the external surfaces of the machine and control panel
with a damp soft cloth. If necessary use only neutral
detergents. Never use abrasive products, scouring pads or
solvent (acetone, trichloroethylene etc....).
8. Place the coarse/fine filter (A/B) in the microfilter C) and
press together.
9. Put the filter combination in place and lock by turning the
handle clockwise to the stop. During this process ensure
that the flat filter does not protrude above the base of the
washing compartment.
Ensure that the seals around the door, the detergent and rinse
aid dispensers are cleaned regularly with a damp cloth.
We recommend the use of Finish Dishwasher Cleaner every
3 months or run a 65°C wash programme without dishes using
detergent.
Regular use of Finish Dishwasher Cleaner cleans
inaccessible parts, eliminates unpleasant food odours and
helps prevent the build-up of limescale.
Under no circumstances may the dishwasher be used
without filters.
Incorrect repositioning and fitting of the filters will
produce poor washing results.
NEVER try to remove the
upper spray arm.
Cleaning the filters
If residues of soil have
clogged the holes in the
upper spray arm, remove
them with a toothpick.
The filters in the base of the washing compartment are to a
large extent self-cleaning. Nevertheless the filters should be
checked and cleaned from time to time. Dirty filters will
degrade the washing result.
1. Open the door, remove the lower basket.
2. The dishwasher filter system comprises a coarse/fine filter
(A/B), a microfilter (C) and a flat filter (D).
Some dishwasher will only have a coarse filter (A), a
microfilter (C) and a flat filter (D).
MA33
Check that the WRD is not clogged with detergent residue. If
necessary rinse it under running water after having removed it
from the basket by twisting it
Unlock the filter system using the handle on the microfilter,
and remove.
anticlockwise and pulling it
upwards.
Never use your dishwasher
without the WRD dispenser.
Since WRD also ensures
correct distribution of the
water to the upper spray
arm, running the
dishwasher without it will
impair the washing results.
MA11
MA35
MA32
1
4
3. Turn the handle about / a turn anticlockwise and remove.
Prolonged periods of non-operation
If you are not using the machine for any period of time you are
advised to:
1. Unplug the appliance and then turn off the water.
2. Fill the rinse aid dispenser.
3. Leave the door ajar to prevent the formation of any
unpleasant smells.
4. Leave the inside of the machine clean.
MA36
4. Take hold of the coarse/fine filter (A/B) by the handle with
the hole and remove from the microfilter (C).
Frost precautions
5. Clean all filters thoroughly under running water.
Avoid placing the machine in a location where the temperature
is below 0°C. If this is unavoidable, empty the machine, close
the appliance door, disconnect the water inlet pipe and empty
it.
6. Remove the flat filter (D) from the base of the washing
compartment and clean both faces thoroughly.
Moving the machine
If you have to move the machine (moving house etc....):
1. Unplug it.
2. Turn the water tap off.
MA31
3. Remove the water inlet and discharge hoses.
4. Pull the machine out together with the hoses.
Avoid over tilting the machine during transportation.
7. Put the flat filter (D) back in the base of the washing
compartment.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
What to do, when...
Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions
given here, without calling out an engineer.
...a flashing fault code appears
The dishwasher will not start or stops during operation. All push buttons are inoperative except for the On/Off push button and a
combination of indicator lights, as indicated in the following chart, are flashing. Press the On/Off push button to switch the
dishwasher off and carry out the following suggested corrective actions.
Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a charge will
be made, even if the appliance is in guarantee.
Fault code / malfunction
Possible cause
Solutions
The water tap is blocked or furred with
limescale.
Clean the water tap.
Indicator lights of the
programme in progress and
"WASH" phase are flashing.
The water tap is turned off.
Turn the water tap on.
The filter (where present) in the threaded hose
fitting at the water inlet valve is blocked.
Clean the filter in the threaded hose
fitting.
The machine does not fill with
water.
The water inlet hose has not been correctly laid
or it is bent or squashed.
Check the water inlet hose connection.
Indicator lights of the
programme in progress and
"DRY" phase are flashing.
The siphon is blocked.
Clean out the siphon.
The water drain hose has not been correctly laid Check the water drain hose connection.
or it is bent or squashed.
The dishwasher will not drain.
Indicator lights of the
programme in progress and
"DRY" and "WASH" phases are
flashing.
Protection against flooding is active.
Close the water tap and contact the
Service Force Centre.
Once the checks have been carried out, press the On/Off push button, the programme will continue from the point in which it was
interrupted. If the fault code reappears contact the Service Force Centre.
For other combinations of fault codes not described in the above chart will appear, please contact your Service Force Centre.
...there are problems when operating the dishwasher
Fault
Possible cause
Solutions
The dishwasher door has not been properly
closed.
Close the door.
The main plug is not plugged in.
Insert the mains plug.
Replace the fuse.
The programme does not start
The fuse has blown in the household fuse box.
If dishes are to be washed immediately,
cancel the delay start.
For dishwasher models with delay start
option:
Delay start has been selected.
There is a whistling noise during
washing
The whistling is not a cause for concern.
Use a different brand of detergent.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
...the wash results are not satisfactory
The dishes are not clean
G The wrong washing programme has been selected.
G The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded.
G The spray arms do not rotate freely due to wrong arrangement of the load.
G The filters in the base of the washing compartment are dirty or incorrectly positioned.
G Too little or no detergent has been used.
G Where there are limescales deposits on the dishes; the salt container is empty or the wrong level of the water softener has been
selected.
G The drain hose connection is not correct.
G The salt container cap is not properly closed.
The dishes are wet and dull
G Rinse aid was not used.
G The rinse aid dispenser is empty.
There are streaks, milky spots or a bluish coating on glasses and dishes
G Decrease rinse aid dosing.
Water drops have dried onto glasses and dishes
G Increase rinse aid dosing.
G The detergent may be the cause. Contact the detergent manufacturer’s consumer care line.
If after all these checks, the problem persists, contact your
local Service Force Centre, quoting the model (Mod.), product
number (PNC) and serial number (S.N.).
This information can be found on the rating plate located on
the side of the dishwasher’s door (see picture).
So that you always have these numbers at hand, we
recommend you to make a note of them here:
Mod. : . . . . . . . . . . . . . . . . . .
PNC : . . . . . . . . . . . . . . . . . .
S.N. :. . . . . . . . . . . . . . . . . . .
RA08
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Service and Spare Parts
In the event of your appliance requiring service, or if you wish
to purchase spare parts please contact your local Service
Force Centre by telephoning:
08705 929929
Your telephone call will be automatically routed to the Service
Force Centre covering your post code area.
For the address of your local Service Force Centre and further
information about Service Force, please visit the website at
Before calling out an engineer, please ensure you read the
details under the heading "What to do, when...".
When you contact the Service Force Centre you will need to
give the following details:
1. Your name, address and post code
2. Your telephone number
3. Clear and concise details of the fault
4. The model and serial number of the appliance (found on the
rating plate)
5. The purchase date
Please note that a valid purchase receipt or guarantee
documentation is required for in-guarantee service calls.
For Customer Service in Ireland please contact us at the
address below:
Zanussi Electrolux
Electrolux Group (Irl) Ltd
Long Mile Road
Dublin 12
Republic of Ireland
Tel: + 353 (0)1 4090751
Email: [email protected]
Customer Care
Department
For general enquiries concerning your Zanussi Electrolux
appliance or for further information on Zanussi Electrolux
products please contact our Customer Care Department by
letter or telephone at the address below or visit our website at
Customer Care Department
Zanussi Electrolux
55-77 High Street
Slough
Berkshire
SL1 1DZ
Tel: 08705 727727 ( )
*
calls to this number may be recorded for training purposes
*
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Guarantee Conditions
Standard Guarantee Conditions
European Guarantee
We, Zanussi Electrolux, undertake that if within 12 months of
the date of purchase this ZANUSSI ELECTROLUX appliance
or any part thereof is proved to be defective by reason only of
faulty workmanship or materials, we will, at our option repair or
replace the same FREE OF CHARGE for labour, materials or
carriage on condition that:
If you should move to another country within Europe then your
guarantee moves with you to your new home subject to the
following qualifications:
G The guarantee starts from the date you first purchased your
product.
G The guarantee is for the same period and to the same extent
for labour and parts as exists in the new country of use for
this brand or range of products.
G The appliance has been correctly installed and used only on
the electricity supply stated on the rating plate.
G The appliance has been used for normal domestic purposes
only, and in accordance with the manufacturer’s instructions.
G This guarantee relates to you and cannot be transferred to
another user.
G The appliance has not been serviced, maintained repaired,
taken apart or tampered with by any person not authorised
by us.
G Your new home is within the European Community (EC) or
European Free Trade Area.
G The product is installed and used in accordance with our
instructions and is only used domestically, i.e. a normal
household.
G All service work under this guarantee must be undertaken by
a Service Force Centre.
G Any appliance or defective part replaced shall become the
Company’s property.
G The product is installed taking into account regulations in
your new country.
G This guarantee is in addition to your statutory and other legal
rights.
Before you move please contact your nearest Customer Care
centre, listed below, to give them details of your new home.
They will then ensure that the local Service Organisation is
aware of your move and able to look after you and your
appliance.
Home visits are made between 8.30am and 5.30pm Monday
to Friday. Visits may be available outside these hours in which
case a premium will be charged.
France
Senlis
+33 (0) 344 62 29 29
+49 (0) 800 234 7378
+39 (0) 434 39 4700
+46 (0) 8 672 53 90
+44 (0)1753 219897
+353 (0)1 4090751
Exclusions
This guarantee does not cover:
Germany Nurnberg
Italy
Pordenone
Stockholm
Slough
G Damage or calls resulting from transportation, improper use
or neglect, the replacement of any light bulbs or removable
parts of glass or plastic.
Sweden
UK
Ireland
Dublin
G Costs incurred for calls to put right an appliance which is
improperly installed or calls to appliances outside the United
Kingdom.
G Appliances found to be in use within a commercial
environment, plus those which are subject to rental
agreements.
G Products of Zanussi Electrolux manufacture which are not
marketed by Zanussi Electrolux.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation instructions
Any electrical and/or plumbing work required to install
this appliance should be carried out by a qualified
electrician and/or plumber or competent person.
Water supply connections
This dishwasher must be plumbed into a cold water supply.
For making the connection itself, the coupling nut fitted to the
machine’s supply hose is designed to screw onto either a 3/4"
inch gas thread spout or to a purpose made quick-coupling tap
such as the Press-block.
Remove all packaging before positioning the machine.
If possible, position the machine next to a water tap and a
drain.
The water pressure must be within the limits given in the
"Technical specifications". Your local Water Authority will
advise you on the average mains pressure in your area.
Fitting under a counter
The water inlet hose must not be kinked, crushed, or entangled
when it is being connected up.
(kitchen worktop or sink)
By removing the machine’s worktop, you can install it under a
close fitting sink unit or a pre-existing top, providing the
dimensions of the recess correspond to those shown in the
picture.
The dishwasher features fill and drain hoses which can be
turned either to the left or the right to suit the installation by
means of the locknut. (Attention! NOT all models of
dishwashers have fill and drain hoses provided with locknut. In
this case, this kind of facility is not possible).
The locknut must be correctly fitted to avoid water leaks.
If the machine is connected to new pipes or pipes which have
not been used for a long time, you should run the water for a
few minutes before connecting the inlet hose.
Do not use, for connection, old hoses which have been
used in another appliance.
600
The dishwasher is fitted with safety devices that prevent the
wash water returning into the drinking water system and
comply with the applicable plumbing regulations.
IN05
Proceed as follows:
Remove the machine’s worktop by unscrewing the two rear
retaining screws, pull from the front and slide out the rear
slots, lifting the worktop.
Insert the machine after adjusting height and levelling with the
adjustable feet. When inserting the machine, ensure that the
water inlet and drain hoses are not kinked or squashed.
If the dishwasher is later used as a free-standing appliance,
the original worktop must be re-mounted.
The plinth on free-standing appliances is not adjustable.
Levelling
Good levelling is essential for correct closure and sealing of
the door.
When the appliance is correctly levelled, the door will not catch
on either side of the cabinet.
If the door does not close correctly, loosen or tighten the
adjustable feet until the machine is perfectly level.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Water outlet hose connection
Electrical connection
The end of the drain hose can be connected in the following
ways:
This appliance must be earthed.
The manufacturer declines any responsibility should this
safety measure not be observed.
1. To the sink outlet spigot, securing it to the underside of the
work surface. This will prevent waste water from the sink
running into the machine.
If the plug that is fitted to your appliance is not suitable for the
socket, it must be cut off and the appropriate plug fitted.
2. Hooked over the edge of the sink using the special curved
plastic guide (if provided with the machine).
Important
The wires on the mains lead are coloured in accordance with
the following code:
3. To a stand pipe provided with vent-hole, minimum internal
diameter 4 cm.
Green and Yellow - Earth
The waste connection must be at a height of between 30 cm
(minimum) and 100 cm (maximum) from the bottom of the
dishwasher.
Blue
- Neutral
- Live
Brown
If you fit your own plug, the colours of the wires in the mains
lead of your appliance may not correspond with the markings
identifying the terminals in your plug.
The drain hose can face either to the right or left of the
dishwasher
Ensure the hose is not bent or squashed as this could prevent
or slow down the discharge of water.
Proceed as follows:
1. Connect the Green and Yellow (earth) wire to the terminal
The sink plug must not be in place when the machine is
draining as this could cause the water to siphon back into the
machine.
in the plug which is marked with the letter "E" or the earth
symbol
or coloured green and yellow.
2. Connect the Blue (neutral) wire to the terminal in the plug
If you use a drain hose extension it must be no longer than 2
metres and its internal diameter must be no smaller than the
diameter of the hose provided.
which is marked with the letter "N" or coloured black.
3. Connect the Brown (live) wire to the terminal in the plug
which is marked with the letter "L" or coloured red.
E
L
N
CS18
Likewise the internal diameter of the couplings used for
connections to the waste outlet must be no smaller than the
diameter of the hose provided.
CE04
Attention!
Our appliances are supplied with a security device to protect
against the return of dirty water back into the machine.
If the spigot of your sink has a "no return valve" incorporated
this can prevent the correct draining of your dishwasher.
We advise you therefore to remove it.
The plug moulded onto the lead incorporates a 13amp BSI362
fuse. Only ASTA or BSI fuses should be used.
The plug must not be used if the fuse cover/carrier is lost. The
cover/carrier is indicated by the coloured insert at the base of
the plug.
A replacement cover/carrier must be obtained from your local
Service Force Centre.
To isolate the dishwasher from mains, remove the mains plug.
Important!
The plug must still be accessible after the appliance
has been installed.
The appliance should not be connected to the
electrical supply by means of an extension cable.
In case that the electrical cable has to be replaced,
please contact your local Service Force Centre.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Hints for test centres
Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing
programmes" chart).
Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and
rinse aid respectively and using the test programme (see "Washing programmes" chart).
Load:
12 standard place settings
Rinse aid setting
Rinse aid dispenser (type A):
Rinse aid dispenser (type B):
position 4 (Type III)
position 5 (Type III)
Detergent dosage :
5 g + 25 g (Type B)
Arrangement upper basket
Arrangement lower basket
Arrangement cutlery basket
Arrangement cutlery basket
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
From the Electrolux Group. The world’s No.1 choice.
The Electrolux Group is the world’s largest producer of powered appliances for kitchen,
cleaning and outdoor use. More than 55 million Electrolux Group products (such as
refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year
to a value of approx. 14 billion USD in more than 150 countries around the world.
©
Subject to change without notice
Electrolux plc 2003
1 06/03
Download from Www.Somanuals.com. All Manuals Search And Download.
|