Yamaha DVD Player DVD S663 User Manual

U
DVD PLAYER  
LECTEUR DVD  
DVD-S663  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FCC INFORMATION (for US customers)  
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!  
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications  
not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.  
2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables.  
Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void  
your FCC authorization to use this product in the USA.  
3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class  
“B” digital devices.  
Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential  
environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio  
frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference  
harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference  
will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning  
the product “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:  
Relocate either this product or the device that is being affected by the interference.  
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.  
In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the  
lead-in to coaxial type cable.  
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this  
type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., 6660 Orangethorpe  
Ave. Buena Park, CA90620.  
The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.  
We Want You Listening For A Lifetime  
Yamaha and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of  
your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying  
blaring or distortion - and, most importantly, without affecting your sensitive hearing.  
Since hearing damage from loud sounds is often undetectable until it is too late, Yamaha and the Electronic Industries  
Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume  
levels.  
For Customer Use:  
Read carefully the information located at the rear  
panel of this unit and enter below the Serial No.  
Retain this information for future reference.  
Model No.  
Serial No. __________________________  
CAUTION  
Use of controls or adjustments or performance of  
procedures other than those specified herein may  
result in hazardous radiation exposure.  
AVOID DIRECT EXPOSURE TO THE BEAM  
INVISIBLE LASER RADIATION WHEN OPEN  
DANGER:  
DO NOT STARE INTO BEAM  
INVISIBLE LASER RADIATION WHEN OPEN  
CAUTION:  
ii En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION: READ THIS BEFORE OPERATING THIS UNIT.  
1
2
To assure the finest performance, please read this  
manual carefully. Keep it in a safe place for future  
reference.  
Install this unit in a well ventilated, cool, dry, clean  
place — away from direct sunlight, heat sources,  
vibration, dust, moisture, or cold. In a cabinet, allow  
about 2.5 cm (1 inch) of free space all around this  
unit for adequate ventilation.  
15 Be sure to read the “Troubleshooting” section on  
common operating errors before concluding that  
this unit is faulty.  
16 Before moving this unit, press STANDBY/ON to  
set the unit in standby mode, then disconnect the  
AC power plug from the wall outlet.  
17 Install this unit near the AC outlet and where the AC  
power plug can be reached easily.  
3
4
Locate this unit away from other electrical  
appliances, motors, or transformers to avoid  
humming sounds.  
Do not expose this unit to sudden temperature  
changes from cold to hot, nor locate this unit in an  
environment with high humidity (i.e., a room with a  
humidifier) to prevent condensation inside this unit,  
which may cause an electrical shock, fire, damage  
to this unit, and/or personal injury.  
18 The batteries shall not be exposed to excessive heat  
such as sunshine, fire or the like.  
The unit is not disconnected from the AC power  
source as long as it is connected to the wall outlet,  
even if this unit itself is turned off. This state is called  
the standby mode. In this state, this unit is designed  
to consume a very small quantity of power.  
5
Avoid installing this unit in a location where foreign  
objects may fall onto this unit or where this unit  
may be exposed to liquid dripping or splashing. On  
the top of this unit, do not place:  
FOR CANADIAN CUSTOMERS  
To prevent electric shock, match wide blade of plug  
to wide slot and fully insert.  
This Class B digital apparatus complies with  
Canadian ICES-003.  
Other components, as they may cause damage and/or  
discoloration on the surface of this unit.  
Burning objects (i.e., candles), as they may cause  
fire, damage to this unit, and/or personal injury.  
Containers with liquid in them, as they may fall,  
spilling the liquid and causing an electrical shock to  
the user and/or damage to this unit.  
WARNING  
TO REDUCE THE RISK OF FIRE OR ELECTRIC  
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN  
OR MOISTURE.  
6
Do not cover this unit with a newspaper, tablecloth,  
curtain, etc. in order not to obstruct heat radiation. If  
the temperature inside this unit rises, it may cause  
fire, damage to this unit, and/or personal injury.  
Do not plug in this unit to a wall outlet until all  
connections are complete.  
LASER SAFETY  
7
8
9
This unit employs a laser. Due to possible eye injury,  
only a qualified service person should remove the cover  
or attempt to service this device.  
Do not operate this unit upside-down. It may  
overheat, possibly causing damage.  
Do not use excessive force on switches, knobs and/  
or cords.  
DANGER  
10 When disconnecting the power cord from the wall  
outlet, grasp the plug; do not pull the cord.  
11 Do not clean this unit with chemical solvents; this  
might damage the finish. Use a clean, dry cloth.  
12 Use only the voltage specified on this unit. Using  
this unit with a higher voltage than specified is  
dangerous and may cause fire, damage to this unit,  
and/or personal injury. Yamaha will not be held  
responsible for any damage resulting from use of  
this unit with a voltage other than as specified.  
13 Do not attempt to modify or fix this unit. Contact  
qualified Yamaha service personnel when any  
service is needed. The cabinet should never be  
opened for any reason.  
This unit emits visible laser radiation when open. Avoid  
direct eye exposure to beam.  
When this unit is plugged into a wall outlet, do not  
place your eyes close to the opening of the disc tray and  
other openings or look inside.  
14 When not planning to use this unit for long periods  
of time (i.e., vacation), disconnect the AC power  
plug from the wall outlet.  
iii En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Operations for video playback  
(DVD/VCD/SVCD)..................................... 18  
Resuming playback from the last stopped point  
...........................................................................18  
Selecting an audio language/format and subtitle  
language ............................................................20  
(MP3/WMA/WMV/JPEG/DivX®)............... 21  
Playing MP3 music and JPEG pictures  
SCART terminal <D>  
(Europe and Russia models only)......................10  
simultaneously ..................................................22  
Special DivX® features.............................. 22  
Step 1: Inserting batteries into the remote  
control ......................................................13  
Step 3: Setting a TV type/display and  
language...................................................14  
Setting the audio, subtitle, and disc menu  
languages (DVD-Video only) ...........................16  
Continued  
1 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Displaying the DivX® VOD registration code  
...........................................................................31  
Switching YUV/RGB  
Europe model  
Information for Users on Collection and  
Disposal of Old Equipment and used Batteries  
These symbols on the products, packaging,  
and/or accompanying documents mean that  
used electrical and electronic products and  
batteries should not be mixed with general  
household waste. For proper treatment,  
recovery and recycling of old products and  
used batteries, please take them to applicable  
collection points, in accordance with your  
national legislation and the Directives 2002/  
96/EC and 2006/66/EC. This symbol mark is  
according to the EU directive 2002/96/EC.  
By disposing of these products and batteries  
correctly, you will help to save valuable  
resources and prevent any potential negative  
effects on human health and the environment  
which could otherwise arise from  
inappropriate waste handling.  
For more information about collection and  
recycling of old products and batteries, please  
contact your local municipality, your waste  
disposal service or the point of sale where  
you purchased the items.  
(Europe and Russia models only)......................36  
Selecting DivX® external subtitle group  
[Information on Disposal in other  
Countries outside the European  
Union]  
These symbols are only valid in the European  
Union. If you wish to discard these items,  
please contact your local authorities or dealer  
and ask for the correct method of disposal.  
Note for the battery symbol (bottom  
(except Korea model)........................................38  
Selecting the PBC (playback control) function  
...........................................................................39  
two symbol examples):  
This symbol might be used in combination  
with a chemical symbol. In this case it  
complies with the requirement set by the  
Directive for the chemical involved.  
2 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Introduction  
About this manual  
Region codes  
Thank you for purchasing this unit. This  
owner’s manual explains the basic operation  
of this unit.  
This unit is designed to support the region  
management system. Check the regional code  
number on the DVD disc package. If the  
• Illustrations in this manual are based on the number does not match the region code of this  
Europe model unless otherwise specified.  
• Notes contain important information about  
safety and operating instructions.  
unit (see the table below or the back of this  
unit), this unit may be unable to play the disc.  
yindicates a tip for your operation.  
• This manual is printed prior to production.  
Design and specifications are subject to  
change in part as a result of improvements,  
etc. In case of differences between the  
manual and the product, the product has  
priority.  
Region  
code of  
this unit  
Playable  
discs  
Destination  
U.S.A.,  
Canada  
ALL  
1
2
3
4
5
1
2
3
4
5
Europe  
ALL  
ALL  
ALL  
ALL  
Supplied accessories  
Asia,  
Korea  
For Europe and Russia models  
• Remote control  
• Two batteries (AAA, R03, UM-4) for the  
remote control  
• RCA stereo cable  
• Composite video cable  
Australia,  
Central and  
South America  
Russia  
For U.S.A., Canada, Central and South  
America, Australia, Asia, and Korea  
models  
• Remote control  
• Two batteries (AAA, R03, UM-4) for the  
remote control  
• Audio/video cable  
3 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Introduction  
Notes  
CD-R/RW, DVD-R/RW/R DL, and DVD+R/RW  
R DL cannot be played unless finalized.  
Progressive JPEG, copyright-protected WMA  
and WMV files cannot be played with this unit.  
This unit is not compatible with WMV Advanced  
profile.  
Only the first session of DVD-R/RW/R DL and  
DVD+R/R DL can be played.  
Discs without logos shown left are not guaranteed  
to function.  
Some discs cannot be played depending on disc  
characteristics or recording conditions even if  
they have the logos shown left.  
Playable disc formats  
/
This unit is designed for use with discs having  
the logos shown below. Do not attempt to load  
any other type of disc into this unit.  
This unit can play:  
Do not use any non-standard shaped discs  
(heart-shaped, etc.).  
Do not use discs with tape, seals, paste or many  
scratches on their surface.  
• DVD-R/RW/R DL and DVD+R/RW/R DL  
discs recorded in DVD-Video compatible  
format  
• DVD-R/RW discs recorded in VR format  
(compatible with CPRM)  
• MP3, WMA, WMV, and JPEG files  
recorded on CD-R/RW, DVD-R/RW,  
DVD+R/RW, and USB device  
y
For details about playable formats, see  
• KODAK picture CDs, FUJICOLOR CDs  
• ISO 9660 Level1/Level2 for CD-R/RW  
Cleaning discs  
Up to 298 folders per disc/USB device and up  
to 648 files per folder with up to 8 hierarchies  
®
• When a disc becomes dirty, clean it with a  
cleaning cloth. Wipe the disc from the center  
out. Do not wipe in a circular motion.  
• Do not use solvents such as benzine, thinner,  
commercially available cleaners, or  
• DivX files recorded on CD-R/RW,  
DVD-R/RW, DVD+R/RW, and USB device  
– Official DivX® Ultra Certified product  
– Plays all versions of DivX® video (including  
DivX® 6) with enhanced playback of DivX®  
media files and the DivX Media Format  
antistatic spray intended for analog records.  
4 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Introduction  
Patent information  
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of  
Dolby Laboratories.  
Manufactured under license under U.S. Patent No’s : 5,451,942 and other U.S. and worldwide patents issued  
and pending. DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are  
trademarks of DTS, Inc. Copyright 1996-2007 DTS, Inc. All Rights Reserved.  
DivX, DivX Ultra Certified, and associated logos are trademarks of DivX, Inc. and are used under license.  
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks  
of HDMI Licensing LLC.  
This product incorporates copyright protection technology that is protected by U.S. patents and other  
intellectual property rights. Use of this copyright protection technology must be authorized by  
Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized  
by Macrovision. Reverse engineering or disassembly is prohibited.  
5 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Functional Overview  
Functional Overview  
Front panel  
1
2
3 4 5  
6
7 8 9 0  
q
1 STANDBY/ON  
6 Front panel display  
Turns on this unit or sets it to the standby mode  
(see page 13). In the standby mode, this unit  
consumes a small amount of power in order to  
receive infrared signals from the remote control.  
Shows the current status of this unit.  
7 Remote control sensor  
Receives infrared signals from the remote  
control (see page 13).  
2 Disc tray  
Loads a disc in the disc tray (see page 17).  
8 PLAY ( p)  
Starts playback.  
3 OPEN/CLOSE (  
)
9 PAUSE (  
)
Opens or closes the disc tray (see page 17).  
Pauses playback.  
4 HDMI indicator  
Frame-by-frame playback (see page 17).  
Lights up when an HDMI component is  
connected and signals output via the HDMI jack  
of this unit.  
0 STOP ( s )  
Stops playback.  
q USB port  
5 PROGRESSIVE indicator  
Lights up when this unit is in the progressive  
mode (see page 34).  
Connect the USB connector of your USB device  
6 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Functional Overview  
Rear panel  
COMPONENT  
VIDEO  
PR/ CR  
Y
MAINS  
REMOTE CONTROL  
OUT IN  
HDMI  
COAXIAL  
DIGITAL OUT  
PB/ CB  
VIDEO OUT  
S VIDEO  
AV  
AUDIO OUT  
1
2
3
4
5
6 7 8  
9
(Europe model)  
1 AC power cable  
5 DIGITAL OUT - COAXIAL jack  
Connect to the coaxial input jack of your AV  
receiver (see page 9).  
Plug the power cable into the AC wall outlet.  
2 REMOTE CONTROL (IN, OUT) jacks  
Connect the REMOTE CONTROL (IN) jack of  
this unit to the remote control output jack of  
your Yamaha AV receiver (see page 12).  
Connect the REMOTE CONTROL (OUT) jack  
of this unit to the remote control input jack of  
your Yamaha component.  
6 VIDEO OUT - COMPONENT (Y, PB/CB, PR/  
CR) jacks  
Connect to the component input jacks of your  
AV receiver (see page 10).  
7 VIDEO OUT - S VIDEO jack  
Connect to the S-video input jack of your AV  
3 HDMI jack  
Connect to the HDMI input jack of your HDMI  
component (see page 11).  
8 VIDEO OUT - VIDEO jack  
Connect to the composite video input jack of  
your AV receiver (see page 10).  
4 AUDIO OUT (L, R) jacks  
Connect to the audio input jacks of your AV  
receiver or stereo system (see page 9).  
9 AV terminal  
(Europe and Russia models only)  
Connect to the SCART input terminal of your  
TV (see page 10).  
Caution: Do not touch the inner pins of the jacks on the rear panel of this unit.  
Electrostatic discharge may cause permanent damage to this unit.  
7 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Functional Overview  
Remote control  
6
7
Opens the disc tray.*  
7 Numeric buttons (0-9)  
Selects numbered items in the currently  
displayed menu.  
1
2
0
8 SUBTITLE  
Selects the subtitle language (see pages 20 and  
22).  
3
9 ZOOM  
4
5
6
q
w
e
r
Enlarges or shrinks the video image (see  
pages 18 and 22).  
0 ON SCREEN  
Accesses or exits from the on-screen display  
(OSD) menu of this unit (see page 19).  
7
t
y
u
q SET UP  
8
9
Accesses or exits from the setup menu of this  
w 33l  
Moves to the next chapter or track (see page 17).  
Searches forward (see page 17).*  
1
e 3/8  
Turns on this unit or sets it to the standby mode  
(see page 13). In the standby mode, this unit  
consumes a small amount of power in order to  
receive infrared signals from the remote control.  
Starts or pauses playback (see page 17).  
r USB  
Accesses the contents of the connected USB  
device or exits from the USB mode (see  
page 23).  
2 TOP MENU/RETURN  
Displays the top-level disc menu (DVD).  
Moves back to the previous menu (DVD*/VCD)  
t AUDIO  
Selects the audio language or format (see  
pages 20 and 22).  
3 2 / 3/5/a  
Selects an item in the currently displayed menu.  
y REPEAT  
Accesses or exits from the repeat/shuffle mode  
ENTER  
Confirms the menu selection (see page 27).  
u REPEAT A-B  
4 MENU  
Repeats a specified segment (see page 18).  
Displays the menu of a disc (DVD/JPEG) (see  
* Press and hold the button for about two seconds.  
Switches PBC on or off (VCD) (see page 20).  
5 l22  
Moves to the previous chapter or track (see  
page 17).  
Searches backward (see page 17).*  
8 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connections  
Connections  
Notes  
General notes on connections  
You need to set [DIGITAL OUTPUT] to [ALL]  
Be sure to turn off this unit and unplug the  
power cable before you make or change  
connections.  
• Depending on the component you want to  
connect, there are various ways to make  
connections. Possible connections are  
described below.  
• Refer to the manuals supplied with your  
other components as necessary to make the  
best connections.  
• Do not connect this unit via your VCR. The  
video quality could be distorted by the copy  
protection system.  
If the audio format of the digital output does not  
match the capabilities of your receiver, the  
receiver produces a distorted sound or no sound  
at all. Make sure to select the appropriate audio  
format from the menu screen on the disc.  
Pressing AUDIO on the remote control once or  
more may change not only the audio languages  
but also the audio format. The selected format  
appears on the TV screen for several seconds.  
If you want to enjoy Dolby Digital and DTS  
formats, you must connect this unit to an AV  
receiver that supports these formats.  
• Do not connect the audio out jack of this unit  
to the phono in jack of your audio system.  
Analog connection  
This unit has 2-ch analog output jacks.  
Connect the AUDIO OUT (L, R) jacks of this  
unit to the corresponding input jacks of your  
audio component (such as a stereo amplifier)  
using the supplied RCA stereo cable (Europe  
and Russia models) or audio/video cable  
(other models).  
Audio connections  
Digital connection  
This unit has a digital coaxial output jack.  
Connect the DIGITAL OUT - COAXIAL jack  
of this unit to your AV receiver equipped with  
a Dolby Digital or DTS decoder using a  
commercially available coaxial digital audio  
cable.  
This unit (Europe model)  
COMPONENT  
VIDEO  
PR/ CR  
Y
COAXIAL  
PB/ CB  
S VIDEO  
AV  
AUDIO OUT  
DIGITALOUT  
VIDEO OUT  
This unit (Europe model)  
L
R
RCA stereo cable (Europe and Russia  
models) or audio/video cable  
(other models)  
COMPONENT  
VIDEO  
PR/ CR  
Y
(supplied)  
L
R
COAXIAL  
DIGITAL OUT  
PB/ CB  
VIDEO OUT  
S VIDEO  
AV  
AUDIO OUT  
Stereo  
amplifier  
C
C
Coaxial digital audio cable  
AV receiver  
L
R
Speakers  
Speakers  
9 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Connections  
commercially available component video  
cable. Observe the color of each jack when  
you make connections.  
If your receiver does not have component  
output jacks, you can achieve a better video  
image by connecting the component output  
jacks of this unit directly to the component  
input jacks of your TV.  
Video connections  
Make video connections to your receiver and  
TV so that you can use one TV for several  
different video sources (LD, VCR, etc.) by  
simply switching the input source selector of  
your receiver.  
This unit has several types of video output  
jacks. Use the one that corresponds to the  
input jacks of the component to be connected.  
S-video jack <B>  
S-video connections achieve a clearer picture  
than composite video connections by  
This unit (Europe model)  
COMPONENT  
VIDEO  
PR/ CR  
Y
transmitting video signals on separate wires  
for luminance (Y) and chrominance (C).  
Connect the VIDEO OUT - S VIDEO jack of  
this unit to an S-video input jack of your AV  
receiver and then to that of your TV using a  
commercially available S-video cable.  
COAXIAL  
DIGITAL OUT  
PB/ CB  
VIDEO OUT  
S VIDEO  
AV  
AUDIO OUT  
S
PR  
PB  
Y
V
Composite video  
cable (Europe and  
Russia models)  
or audio/video  
cable  
(other models)  
(supplied)  
Component  
video cable  
S-video  
cable  
Composite video jack <C>  
Connect the VIDEO OUT - VIDEO jack of  
this unit to a video input jack of your AV  
receiver and then to that of your TV using the  
supplied composite video cable (Europe and  
Russia models) or audio/video cable (other  
models).  
V
<B>  
<C>  
<D>  
<A> PR  
PB  
Y
S
PR/CR  
P
B/CB  
Y
COMPONENT  
VIDEO IN  
S VIDEO  
INPUT  
VIDEO  
INPUT  
SCART terminal <D>  
(Europe and Russia models only)  
AV receiver  
SCART cable  
You may connect the TV directly to this unit.  
Connect the AV terminal of this unit to the  
SCART input terminal of your TV using a  
commercially available SCART cable.  
The AV terminal outputs composite and RGB  
video signals together with 2-ch audio signal.  
Set the output of the video signal in  
COMPONENT  
S VIDEO  
OUT  
VIDEO  
VIDEO OUT  
OUT  
COMPONENT  
VIDEO IN  
S VIDEO  
IN  
VIDEO  
IN  
TV  
Component video jacks <A>  
Component video connections achieve higher  
fidelity color reproduction than S-video  
connections by transmitting video signals on  
separate wires for luminance (Y: green) and  
chrominance (PB: blue, PR: red).  
Connect the VIDEO OUT - COMPONENT  
(Y, PB/CB, PR/CR) jacks of this unit to  
component input jacks of your AV receiver  
and then to those of your TV using a  
10 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Connections  
Notes  
HDMI connection  
You need to set [HDMI AUDIO] (see page 32)  
and [HDMI VIDEO] (see page 36) properly.  
You need to make appropriate audio connections  
if the connected component does not output audio  
This unit is not compatible with HDCP-  
incompatible HDMI or DVI components.  
You need a commercially available HDMI/DVI  
conversion cable when you connect this unit to  
other DVI components. In this case, the HDMI  
jack of this unit does not output any audio  
signals.  
Depending on the connected DVI component,  
black and white in the image may not be distinct.  
In that case, adjust the picture setting of the  
connected DVI component.  
Do not disconnect or turn off the power of the  
HDMI/DVI component connected to the HDMI  
jack of this unit during playback. Doing so may  
disrupt playback or cause noise.  
HDMI jack  
HDMI (High-Definition Multimedia  
Interface) provides high quality digital audio  
and video on a single connection.  
Connect the HDMI jack of this unit to an  
HDMI input jack of your AV receiver, and  
then to that of your TV using a commercially  
available HDMI cable.  
If your receiver does not have an HDMI input  
jack, you can achieve a better video image by  
connecting the HDMI jack of this unit directly  
to the HDMI input jack of your TV.  
This unit can display High-Definition JPEG  
images (720p, 1080i, or 1080p) when you  
connect this unit to an HDTV via the HDMI  
This unit (Europe model)  
y
COMPONENT  
VIDEO  
PR/ CR  
Y
HDMI  
When connecting an HDMI component, refer to the  
manual supplied with your component.  
COAXIAL  
PB/ CB  
S VIDEO  
AUDIO OUT  
DIGITALOUT  
VIDEO OUT  
HDMI cable  
HDMI IN  
AV receiver  
HDMI OUT  
HDMI IN  
TV  
11 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connections  
Remote control jacks  
Other connections  
This unit has remote control input/output  
jacks. If your AV receiver is a Yamaha product  
and has the capability to transmit SCENE  
control signals, you can use the SCENE  
function.  
Connect the REMOTE CONTROL (IN) jack  
of this unit to a remote control output jack of  
your receiver using a commercially available  
monaural 3.5 mm mini plug cable so that this  
unit starts playback automatically by simply  
pressing a SCENE button of your receiver.  
USB port  
This unit has a USB port and can access MP3,  
WMA, WMV, JPEG, and DivX files saved  
on your USB device.  
Connect a USB connector of your USB device  
to the USB port on the front panel of this unit.  
When your USB device is connected to the  
USB port of this unit, you can record tracks on  
a CD onto your USB device in MP3 format.  
®
This unit  
To disconnect the USB device, press  
7
to  
MAINS  
REMOTE CONTROL  
OUT IN  
HDMI  
stop playback, press USB to return to the disc  
mode, and then disconnect the device from  
this unit.  
This unit  
Monaural 3.5 mm mini plug  
cable  
REMOTE OUT  
AV receiver  
USB  
device  
y
For details about the SCENE function, refer to  
the owner’s manual supplied with your Yamaha  
AV receiver.  
Note  
You can connect a Yamaha component (such as  
DVD player and CD player) corresponds with the  
SCENE function to the REMOTE CONTROL  
(OUT) jack of this unit.  
This unit may not recognize some USB devices.  
y
For details about the USB features, see “Using a  
12 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Getting Started  
Getting Started  
Using the remote control  
Step 1: Inserting batteries into  
the remote control  
Use the remote control within 6 m  
(approximately 20 ft) of this unit and point it  
toward the remote control sensor.  
3
1
Within 6 m  
(approximately 20 ft)  
2
1 Open the battery compartment.  
2 Insert the two supplied batteries (AAA,  
R03, UM-4) following the indications (+/–)  
inside the compartment.  
Notes  
Do not spill water or other liquids on the remote  
control.  
3 Close the cover.  
Do not drop the remote control.  
Do not leave or store the remote control in the  
following types of conditions:  
– places of high humidity, such as near a bath  
– places of high temperature, such as near a  
heater or stove  
– places of extremely low temperature  
– dusty places  
When the remote control works unstably, point it  
at an angle upward to the sensor.  
Notes  
Insert batteries correctly according to the polarity  
markings (+/–). Batteries inserted in the opposite  
orientation may leak.  
Replace the exhausted batteries immediately with  
new ones to prevent leakage.  
Remove the batteries from the compartment if the  
remote control is not used for more than a month.  
If the batteries have leaked, dispose of them  
immediately. Avoid touching the leaked material  
or letting it come into contact with clothing, etc.  
Clean the battery compartment thoroughly before  
installing new batteries.  
Step 2: Turning on the power  
1 Plug the power cable into the AC outlet.  
2 Turn on your TV and AV receiver.  
Do not use old batteries together with new ones.  
Do not use different types of batteries (such as  
alkaline and manganese batteries) together. Read  
the packaging carefully as these different types of  
batteries may have the same shape and color.  
Dispose of the batteries correctly in accordance  
with your local regulations.  
3 Select the appropriate input source of the  
AV receiver (refer to the manual supplied  
with your AV receiver).  
4 Press STANDBY/ON on the front panel or  
on the remote control to turn on this  
unit.  
The front panel display lights up.  
5 Set the TV to the correct video input (refer  
to the manual supplied with your TV).  
The default screen appears on the TV.  
13 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Getting Started  
PAL  
Step 3: Setting a TV type/display  
and language  
Select this if the connected TV is a PAL  
system TV. It will change the video signals of  
NTSC discs and output them in PAL format.  
You can customize this unit using the setup  
menu displayed on the TV screen.  
NTSC  
Select this if the connected TV is an NTSC  
system TV. It will change the video signals of  
PAL discs and output them in NTSC format.  
Note  
Unless stated otherwise, all operations described  
here are carried out using the supplied remote  
control.  
MULTI  
Select this if the connected TV is compatible  
with both NTSC and PAL formats (such as a  
multi-system TV).  
The output format will be in accordance with  
the video signals of the disc.  
y
To return to the previous menu, press 2.  
If the setting you have selected are not  
appropriate, you can reset all settings to the initial  
page 40).  
5 Select an item, and then press ENTER.  
6 Press SET UP to exit from the menu.  
Setting a color system for your TV  
Notes  
This unit is compatible with both NTSC and  
PAL video formats. Select the color system  
that matches your TV.  
Before changing the current TV standard setting,  
ensure that your TV supports the selected TV  
type.  
When making HDMI connections, you cannot  
change or select [TV TYPE].  
VIDEO SETUP PAGE  
y
TV TYPE  
PAL  
If the picture is not displayed properly on your TV,  
wait for 15 seconds for this unit to activate  
automatic recovery.  
TV DISPLAY  
NTSC  
MULTI  
PROGRESSIVE  
PICTURE SETTING  
BLACK LEVEL  
CLOSED CAPTION  
.......COMPONENT  
*
HDMI SETUP  
: [COMPONENT] is only for Europe and  
Russia models.  
*
1 Press SET UP.  
2 Press 3 repeatedly to select “VIDEO  
SETUP PAGE”.  
3 Press 5/a to highlight [TV TYPE], and  
then press 3.  
4 Press 5/a to highlight one of the  
following options.  
14 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Getting Started  
Setting an aspect ratio for your TV  
Setting the OSD Language  
You can set the aspect ratio of this unit to  
match your TV. If the aspect ratio of your TV  
You can select your own preferred language  
for the setup menu. This setting remains once  
is 16:9, you do not need to change this setting. selected.  
GENERAL SETUP PAGE  
DISC LOCK  
ENGLISH  
DANSK  
MP3 RECORD  
PROGRAM  
VIDEO SETUP PAGE  
DEUTSCH  
ESPAÑOL  
FRANÇAIS  
ITALIANO  
NEDERLANDS  
NORSK  
TV TYPE  
DISPLAY DIM  
OSD LANGUAGE  
SCREEN SAVER  
SLEEP  
TV DISPLAY  
4:3 PAN SCAN  
4:3 LETTER BOX  
16:9  
*
PROGRESSIVE  
PICTURE SETTING  
BLACK LEVEL  
CLOSED CAPTION  
DIVX(R) VOD CODE  
.......COMPONENT  
*
: The menu items may change depending on  
the models.  
*
HDMI SETUP  
: [COMPONENT] is only for Europe and  
Russia models.  
*
1 Press SET UP.  
2 Press 2 / 3 to select “GENERAL SETUP  
1 Press SET UP.  
PAGE”.  
2 Press 3 repeatedly to select “VIDEO  
3 Press 5/a to highlight [OSD  
LANGUAGE], and then press 3.  
4 Press 5/a to select a language, and then  
press ENTER.  
SETUP PAGE”.  
3 Press 5/a to highlight [TV DISPLAY],  
and then press 3.  
4 Press 5/a to highlight the desired setting,  
and then press ENTER.  
5 Press SET UP to exit from the menu.  
5 Press SET UP to exit from the menu.  
15 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Getting Started  
To select a language not in the list  
Setting the audio, subtitle, and disc  
menu languages (DVD-Video only)  
1 Select [OTHERS] in [AUDIO],  
[SUBTITLE], or [DISC MENU], and then  
press ENTER.  
You can select your own preferred language  
for the audio, subtitle, and disc menu. This  
unit automatically switches to the selected  
language whenever you load a disc. If the  
selected language is not available on the disc,  
the default language of the disc will be used  
instead.  
2 Use the numeric buttons (0-9) to enter  
the 4-digit language code (see “Language  
ENTER.  
3 Press SET UP to exit from the menu.  
PREFERENCE PAGE  
AUDIO  
ENGLISH  
CHINESE (SIMP)  
FRENCH  
SUBTITLE  
DISC MENU  
PARENTAL  
VR LIST  
SPANISH  
RUSSIAN  
POLISH  
*
DATA DISC NAV  
DIVX SUBTITLE  
PBC  
ITALIAN  
TURKISH  
: The menu items may change depending on  
the models.  
*
1 Press  
7
twice to stop playback (if  
necessary), and then press SET UP.  
2 Press 3 repeatedly to select  
“PREFERENCE PAGE”.  
3 Press 5/a to highlight one of the options  
below, and then press 3.  
AUDIO (audio language)  
SUBTITLE (subtitle language)  
DISC MENU (disc menu language)  
4 Press 5/a to select a language, and then  
press ENTER.  
5 Repeat steps 3-4 for other language  
settings.  
6 Press SET UP to exit from the menu.  
16 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Playback Operation  
Notes  
Playback Operation  
Selecting a track/chapter  
1 Press l22 / 33l or use the numeric  
buttons (0-9) to select a track/chapter  
number.  
If the prohibited icon ( ) appears on the TV  
screen when a button is pressed, the function for  
that button is not available on the current disc or  
at the current time.  
Depending on the disc, some operations may  
operate differently or be restricted. Refer to the  
instruction supplied with the disc.  
Do not push on the disc tray or put any objects  
other than discs on the disc tray. Doing so may  
cause this unit to malfunction.  
2 During repeated playback, press l22 /  
33l to replay the same track/chapter.  
Searching backward/forward  
1 Press and hold l22 / 33l or press 2 / 3.  
2 While searching, press l22 / 33l or  
2 / 3 repeatedly to select the desired  
speed.  
Basic operation  
3 To resume normal playback, press 3/8.  
1 Make sure this unit is turned on.  
2 Press OPEN/CLOSE ( ) on the front  
Note  
panel to open the disc tray.  
The 2 / 3 key may not be available with some  
3 Place the disc in the disc tray with the  
discs.  
printed side up.  
y
4 Press OPEN/CLOSE ( ) again to close  
the disc tray.  
For MP3, WMA, WMV, and DivX®, the search  
function allows you to search the track currently  
being played.  
After recognizing the disc, this unit  
starts playback automatically.  
If you press 3/8 when the disc tray is  
open, the disc tray closes and playback  
starts automatically.  
Repeat/Shuffle functions  
Repeat/Shuffle playback  
5 To pause playback, press 3/8 during  
playback.  
Each time you press REPEAT during  
playback, the front panel display changes  
as follows:  
Playback is paused and the sound is  
muted.  
Frame-by-frame playback can be done  
by pressing PAUSE ( ) on the front  
panel repeatedly.  
DVD-Video  
RPT ONE (repeat chapter)  
RPT TT (repeat title)  
RPT ALL (repeat all)  
SHUFFLE (shuffle)  
RPT SHF (shuffle repeat)  
RPT OFF (repeat off)  
6 To resume normal playback, press 3/8  
again.  
7 To stop playback, press  
7.  
DVD VR format  
RPT ONE (repeat chapter)  
RPT TT (repeat title)  
RPT ALL (repeat all)  
RPT OFF (repeat off)  
17 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Playback Operation  
VCD/SVCD/CD  
To select a playback feature or item  
RPT ONE (repeat track)  
RPT ALL (repeat all)  
SHUFFLE (shuffle)  
RPT SHF (shuffle repeat)  
RPT OFF (repeat off)  
Use 2 / 3/5/a or the numeric  
buttons (0-9), and then press ENTER to  
start playback.  
To access or exit from the menu  
Press MENU.  
MP3/WMA/WMV/DivX®  
RPT ONE (repeat file)  
RPT FLD (repeat folder)  
SHUFFLE (shuffle)  
RPT OFF (repeat off)  
Playback in slow motion  
You can play back video in slow motion.  
1 During playback, press 5 for reverse slow  
motion or a for forward slow motion.  
Note  
For VCD/SVCD, repeat playback is not available  
when the PBC mode (see “Special VCD/SVCD  
2 During slow motion, press 5/a repeatedly  
to select the desired speed.  
3 To resume normal playback, press 3/8.  
Repeating a section within a  
chapter/track  
Note  
For VCD and SVCD, reverse slow motion is not  
available.  
1 While playing a disc, press REPEAT A-B  
at the desired starting point.  
“SET A” appears in the front panel  
display.  
Zooming pictures in/out  
You can enlarge or shrink the picture on the  
TV screen and pan through the enlarged  
picture.  
2 Press REPEAT A-B again at the desired  
end point.  
A and B can only be set within the same  
chapter/track.  
1 During playback, press ZOOM repeatedly  
to display the picture at different scales.  
“RPT AB” appears in the front panel  
display and the selected section repeats  
continuously.  
Use 2 / 3/5/a to pan through the  
enlarged picture.  
Playback continues.  
3 To exit from the sequence, press REPEAT  
A-B.  
2 Press ZOOM repeatedly to return to the  
original size.  
Operations for video playback  
(DVD/VCD/SVCD)  
Resuming playback from the last  
stopped point  
You can resume playback of the last ten discs,  
even if the discs were ejected or this unit was  
set to the standby mode.  
Using the disc menu  
Depending on the disc, a menu may appear on  
the TV screen once you load the disc.  
18 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Playback Operation  
1 Load one of the last ten discs.  
“LOADING” appears on the TV  
screen.  
2 Press 5/a to scroll the information, and  
then press ENTER to access the selected  
item.  
3 Use the numeric buttons (0-9) to input  
the number/time or press 5/a to make a  
selection, and then press ENTER.  
Playback changes to the selected time/  
title/chapter/track.  
2 Press 3/8 while “LOADING” is  
displayed on the TV screen.  
“RESUME PLAY” appears on the TV  
screen and the disc is played back from  
the last point.  
Changing the Title/Chapter/Track  
To cancel the resume mode  
(DVD/VCD)  
When playback is stopped, press  
7
again.  
1 Press 5/a to select [TITLE],  
Note  
[CHAPTER] (DVD), or [TRACK] (VCD).  
For DVD VR format, resume playback is not  
available.  
2 Press ENTER.  
3 Select a title, chapter, or track number  
using the numeric buttons (0-9).  
Using the on-screen display (OSD)  
Time search (DVD/VCD)  
The OSD menu shows disc playback  
information (e.g., the title or chapter number,  
elapsed playing time or audio/subtitle  
language). A number of operations are  
possible without interrupting disc playback.  
1 Press 5/a to select [TT TIME] /  
[CH TIME] (DVD) or [DISC TIME] /  
[TRACK TIME] (VCD).  
[TT TIME] refers to the total time of  
the current title, and [CH TIME] refers  
to the total time of the current chapter.  
1 During playback, press ON SCREEN.  
A list of available disc information  
appears on the TV screen.  
2 Press ENTER.  
DVD  
3 Enter hours, minutes and seconds from left  
to right using the numeric buttons (0-9)  
(e.g. 0:34:27).  
MENU  
TITLE  
02/14  
02/14  
5.1CH  
ENG  
CHAPTER  
AUDIO  
Changing the Audio/Subtitle/Angle  
(DVD)  
SUBTITLE  
You can change [AUDIO], [SUBTITLE], or  
[ANGLE] if these functions are available on  
the disc you are playing.  
BITRATE 16  
TITLE ELAPSED 0:02:25  
VCD/SVCD  
1 Press 5/a to select [AUDIO],  
MENU  
[SUBTITLE], or [ANGLE].  
TRACK  
02/14  
DISC TIME  
TRACK TIME  
REPEAT  
0:49:17  
0:03:43  
OFF  
2 Press ENTER.  
BITRATE 16  
TOTAL ELAPSED 0:02:25  
19 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Playback Operation  
3 For Audio and Subtitle:  
Selecting an audio language/  
format and subtitle language  
Press 5/a to highlight your selection, and  
then press ENTER.  
To select an audio language/format  
For Angle:  
Press AUDIO repeatedly to select an audio  
language and/or format.  
Select an angle using the numeric  
buttons (0-9).  
To select a subtitle language  
Repeat/Time Display (DVD/VCD)  
Press SUBTITLE repeatedly to select a  
subtitle language.  
1 Press 5/a to select [REPEAT] or [TIME  
DISP.].  
2 Press ENTER.  
Special VCD/SVCD features  
3 Press 5/a to highlight your selection, and  
then press ENTER.  
Using the playback control (PBC)  
menu  
Time display (CD)  
Each time you press ON SCREEN, the  
time display changes as follows:  
For a VCD with a playback control (PBC)  
feature (version 2.0 only)  
TOTAL ELAPSED  
SINGLE REMAIN  
TOTAL REMAIN  
1 Press MENU to toggle between “PBC ON”  
and “PBC OFF”.  
SINGLE ELAPSED  
If you select “PBC ON”, the disc menu  
appears (if available) on the TV screen.  
Note  
2 Use the numeric buttons (0-9) to select  
Depending on the disc, the OSD menu may not be  
displayed even if you press ON SCREEN.  
a playback option.  
Press l22 / 33l to move to the  
previous/next page (if available).  
3 During playback, press TOP MENU/  
RETURN to return to the menu screen.  
Special DVD features  
To skip the index menu and play  
Playing by title  
back a disc from the beginning  
1 Press MENU.  
Press MENU to turn off the PBC function.  
The disc title menu appears on the TV  
screen.  
2 Use 2 / 3/5/a or the numeric  
buttons (0-9) to select a playback option.  
3 Press ENTER.  
20 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Playback Operation  
Selecting a folder and track/file  
Playing data discs  
®
1 Press 5/a to select a folder, and then  
press ENTER to open the folder.  
(MP3/WMA/WMV/JPEG/DivX )  
1 Load a data disc.  
2 Press 5/a to select a track/file.  
3 Press ENTER.  
The disc reading time may exceed 30  
seconds due to the complexity of the  
directory/file configuration.  
Playback starts from the selected file to  
the end of the folder.  
The data disc menu appears on the TV  
screen.  
00:00 00:00  
001/020  
Special picture disc features  
Favorite  
1 Load a picture disc (JPEG, KODAK  
Picture CD, or FUJICOLOR CD).  
For JPEG, the picture menu appears on  
the TV screen.  
MP3  
Piano  
Cello  
MP3  
MP3  
MP3  
Jazz  
Live  
For KODAK Picture CD and  
FUJICOLOR CD, the slideshow  
begins.  
For JPEG  
2 Playback starts automatically. If not, press  
3/8.  
2 Press 3/8 to start the slideshow.  
3 Press l22 / 33l to select another track/file  
Using the preview function  
in the current folder.  
This function displays the content of the  
current folder or the entire disc.  
Notes  
For JPEG, some files may not be displayed  
correctly depending on the aspect ratio of the  
image.  
1 Press  
7
during playback.  
12 thumbnails appear on the TV screen.  
It may not be possible to play certain MP3/  
WMA/WMV/JPEG/DivX® discs due to the  
configuration and characteristics of the discs or  
the recording conditions.  
HD JPEG images may not be displayed correctly  
when the first image is displayed or the disc is  
ejected. For details about HD JPEG, see “HD  
Depending on the picture size, HD JPEG images  
may appear smaller in size.  
2 Press l22 / 33l to display the other  
thumbnails on the previous/next page.  
21 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Playback Operation  
3 Use 2 / 3/5/a to highlight one of the  
3 During MP3 music playback, select a  
JPEG picture file from the TV screen, and  
then press ENTER.  
thumbnails, and then press ENTER to start  
playback.  
OR  
The picture files are played back one  
after another until the end of the folder.  
Move the cursor to highlight  
on the  
bottom of the page and then press ENTER  
to start playback from the first thumbnail  
on the current page.  
4 To quit simultaneous playback, press  
MENU, and then press  
7.  
Notes  
For JPEG  
Some files cannot be played correctly depending  
on disc characteristics or recording conditions.  
This function is not available when [HD JPEG] is  
set to [ON] (see page 37).  
4 Press MENU to return to the data disc  
menu.  
Zooming pictures in/out  
1 During playback, press ZOOM repeatedly  
®
Special DivX features  
to display the picture at different scales.  
2 Use 2 / 3/5/a to pan through the  
®
®
For DivX files including DMF (DivX  
Media Format) features only  
enlarged picture.  
Using the interactive menu  
Playback with multi-angles  
During playback, press 2 / 3/5/a to  
rotate the picture on the TV screen.  
1 Load a disc and then select a file.  
The interactive menu appears on the  
TV screen.  
2: rotates the picture counter-clockwise  
3: rotates the picture clockwise  
5: flips the picture vertically  
2 Use 2 / 3/5/a to select a chapter.  
3 Press ENTER or 3/8 to start playback of  
a: flips the picture horizontally  
the selected chapter.  
Playing MP3 music and JPEG  
pictures simultaneously  
To access the interactive menu  
During playback, press MENU.  
1 Load a disc that contains both MP3 music  
and JPEG picture data.  
To return to the data disc menu  
screen  
The disc menu appears on the TV  
screen.  
When the interactive menu is displayed,  
press  
7.  
2 Select an MP3 music track.  
Selecting an audio/subtitle language  
To select an audio language  
During playback, press AUDIO to switch  
the audio language recorded on the  
contents.  
22 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Playback Operation  
To select a subtitle language  
Notes  
During playback, press SUBTITLE to  
switch or turn on/off the subtitle language  
recorded on the contents.  
Some devices may not work properly.  
If “Device not supported” appears on the TV  
screen when you connect the USB device, follow  
the procedure below.  
y
– Set this unit to the standby mode, and then turn  
it on again.  
– Disconnect the device when this unit is in the  
standby mode, then connect it again and turn  
on this unit.  
For information about external subtitle files, see  
“Selecting DivX® external subtitle group (except  
Korea model)” on page 38.  
For external subtitle files, the following subtitle  
format filename extensions are supported (note  
that these files are not shown within the disc  
menu): .srt, .sub, .ssa, .smi  
– Connect the AC adapter if the adapter is  
supplied with the device.  
If “Device not supported” appears even after you  
perform this procedure, the device is not usable  
with this unit.  
If “USB current protection active. Device not  
supported” appears on the TV screen, the device  
is not usable with this unit because the power  
consumption of the device is too high.  
This unit cannot read more than two card reader  
slots at once, though it can recognize up to six  
slots. The first slot has priority.  
The filename of the movie file has to be repeated  
at the beginning of the filename for the external  
subtitle file.  
For Korean model, Korean and English external  
subtitle files are available.  
Notes  
Some external subtitle files may be displayed  
incorrectly or not at all.  
Some discs cannot be played depending on disc  
characteristics or recording conditions.  
The number of external subtitle files that can be  
switched for the same movie file is limited to a  
maximum of ten.  
Do not connect devices other than USB mass  
storage class devices: USB chargers, USB hubs,  
PCs, etc.  
This unit is not compatible with HDDs.  
Playing data files  
1 Connect your USB device to the USB port  
“Press USB key to switch device”  
appears on the TV screen.  
Using a USB device  
You can play back MP3, WMA, WMV, JPEG,  
®
and DivX files saved on your supported USB  
device.  
2 Press USB.  
The reading time may exceed 30 seconds  
due to the number of files/folders.  
The file menu appears on the TV screen.  
Supported USB devices  
This unit supports USB mass storage class  
devices using FAT16 or FAT32 format. The  
supported devices are flash memories, card  
readers, and portable audio players.  
3
Follow the procedure in “Playing data discs  
(MP3/WMA/WMV/JPEG/DivX )” on  
®
23 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Playback Operation  
To exit from the USB mode  
Press  
USB.  
7
to stop playback, and then press  
This unit is set to the disc mode.  
To disconnect the USB device  
After exiting from the USB mode,  
disconnect the USB device from this unit.  
Notes  
Yamaha and suppliers accepts no liability for the  
loss of data saved on the USB devices connected  
to this unit. As a precaution, it is recommended  
that the files are made backup copies.  
You cannot access the USB mode while  
“LOADING” is displayed on the TV screen.  
If you disconnect the USB device or open the disc  
tray of this unit, the playback mode is  
automatically switched to the disc mode.  
This unit can display up to 648 files. However,  
less than 648 files may be displayed if some files  
are not playable with this unit.  
If the USB device is partitioned, only the first  
partition is displayed.  
This unit can play back files of 4 GB in size or  
less.  
24 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Menu  
Setup Menu  
Menu overview  
The bold items/parameters listed below are the default settings. The menu items, setting items,  
and default settings may change depending on the models.  
Setup page  
Menu item  
DISC LOCK  
Setting Item/Submenu  
LOCK, UNLOCK  
Setting item/Parameter  
Page  
GENERAL  
SETUP PAGE  
MP3 RECORD  
PROGRAM  
(SETUP is displayed)  
(INPUT MENU is displayed)  
100%, 70%, 40%  
DISPLAY DIM  
OSD LANGUAGE  
SCREEN SAVER  
SLEEP  
ON, OFF  
30, 60, 90, 120, 150 MINS, OFF  
®
DIVX(R) VOD CODE (DivX registration code is displayed)  
AUDIO SETUP ANALOG OUTPUT  
STEREO, LT/RT  
DIGITAL OUTPUT  
LPCM OUTPUT  
ON, OFF  
PAGE  
DIGITAL AUDIO  
OFF, ALL, PCM ONLY  
48KHz, 96KHz  
HDMI AUDIO  
NIGHT MODE  
ON, OFF  
VIDEO SETUP TV TYPE  
PAGE  
PAL (Europe, Russia, Australia, and Asia  
models), NTSC (U.S.A., Canada, Central  
and South America, and Korea models)  
,
MULTI  
TV DISPLAY  
4:3 PAN SCAN, 4:3 LETTER BOX, 16:9  
OFF, ON  
PROGRESSIVE  
PICTURE SETTING  
STANDARD, BRIGHT, SOFT  
PERSONAL (BRIGHTNESS)  
PERSONAL (CONTRAST)  
PERSONAL (TINT)  
–20 to +20 (0)  
–16 to +16 (0)  
–9 to +9 (0)  
PERSONAL (COLOR)  
ON, OFF  
–9 to +9 (0)  
BLACK LEVEL  
CLOSED CAPTION  
ON (U.S.A. and Canada models), OFF  
(Other models)  
COMPONENT  
(Europe and Russia  
models only)  
YUV, RGB  
HDMI SETUP  
WIDE SCREEN FORMAT  
HDMI VIDEO  
SUPERWIDE, 4:3 PILLAR BOX,  
OFF  
480P, 576P, 720P, 1080I, 1080P,  
AUTO  
HD JPEG  
ON, OFF  
25 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Setup Menu  
Setup page  
Menu item  
Setting Item/Submenu  
Setting item/Parameter  
Page  
PREFERENCE AUDIO  
PAGE  
ENGLISH (Europe, U.S.A., Canada,  
Central and South America, Australia,  
and Asia models), RUSSIAN (Russia  
model), KOREAN (Korea model), etc.  
SUBTITLE  
OFF (Europe, U.S.A., Canada, Central  
and South America, Australia, and Asia  
models), RUSSIAN (Russia model)  
,
KOREAN (Korea model), etc.  
DISC MENU  
PARENTAL  
ENGLISH (Europe, U.S.A., Canada,  
Central and South America, Australia,  
and Asia models), RUSSIAN (Russia  
model), KOREAN (Korea model), etc.  
1 KID SAFE, 2 G, 3 PG, 4 PG 13,  
5 PGR, 6 R, 7 NC17, 8 ADULT  
VR LIST  
ORIGINAL LIST, PLAY LIST  
WITHOUT MENU, WITH MENU  
GROUP1, GROUP2, GROUP3,  
DATA DISC NAV  
DIVX SUBTITLE  
(except Korea model) GROUP4, GROUP5  
PBC  
ON, OFF  
ON, OFF  
CHANGE  
RESET  
AUTO STANDBY  
PASSWORD  
DEFAULT  
OSD LANGUAGE setting items  
Model  
Europe  
Setting item  
ENGLISH, DANSK, DEUTSCH,  
ESPAÑOL, FRANÇAIS, ITALIANO,  
NEDERLANDS, NORSK, POLSKI,  
PORTUGUÊS, PYCCKИЙ  
,
SVENSKA, TÜRKÇE  
Russia  
ENGLISH, DANSK, DEUTSCH,  
ESPAÑOL, FRANÇAIS, ITALIANO,  
NEDERLANDS, NORSK, POLSKI,  
PORTUGUÊS, PYCCKИЙ,  
SVENSKA, TÜRKÇE  
U.S.A., Canada  
Australia  
ENGLISH, FRANÇAIS, ESPAÑOL  
ENGLISH, FRANÇAIS, ESPAÑOL  
ENGLISH, ESPAÑOL, PORTUGUÊS  
Central and  
South America  
Asia  
ENGLISH,  
Korea  
,
ENGLISH  
26 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Setup Menu  
3 Press 5/a to highlight the desired menu  
item.  
Setup menu operation  
Menu items and setting items appear.  
Setup is carried out on the TV, enabling you to  
customize this unit to suit your own particular  
requirements. Follow the procedures below to  
start the setup menu operations.  
VIDEO SETUP PAGE  
TV TYPE  
TV DISPLAY  
PROGRESSIVE  
y
To return to the previous menu, press 2.  
The OSDs shown in this section are the examples  
of Europe model. The menu items, setting items,  
and default setting may change depending on the  
models.  
PICTURE SETTING  
BLACK LEVEL  
STANDARD  
BRIGHT  
CLOSED CAPTION  
.......COMPONENT  
SOFT  
PERSONAL  
*
HDMI SETUP  
If the settings you have selected are not  
appropriate, you can reset all settings to the initial  
page 40).  
Refer to the following pages for details of the  
menu that requires a particular operation.  
: [COMPONENT] is only for Europe and  
Russia models.  
*
If setting items do not appear, the selected  
menu item has submenus. In this case,  
press ENTER, and then repeat step 3.  
1 Press SET UP.  
The setup page and menu items appear  
4 Press 3.  
5 Press 5/a to select the desired setting  
item, and then press ENTER.  
on your TV.  
If the parameter appears, press  
adjust the setting, and then press  
ENTER  
2
/
3
to  
GENERAL SETUP PAGE  
DISC LOCK  
.
MP3 RECORD  
PROGRAM  
DISPLAY DIM  
OSD LANGUAGE  
SCREEN SAVER  
SLEEP  
PERSONAL PICTURE SETUP  
DIVX(R) VOD CODE  
BRIGHTNESS  
CONTRAST  
TINT  
0
0
0
0
2 Press 2 / 3 to select the desired setup  
COLOR  
page.  
6 Press SET UP to exit from the menu.  
27 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Setup Menu  
Notes  
MP3 files created by this unit are restricted to  
General setup menu  
your private enjoyment only. Unauthorized use of  
copyrighted recordings can be copyright  
infringement.  
GENERAL SETUP PAGE  
Yamaha and suppliers accepts no liability for the  
loss of data saved on the USB devices connected  
to this unit. As a precaution, it is recommended  
that the files are made backup copies.  
Discs incompatible with CDDA standard are not  
guaranteed to function.  
DISC LOCK  
MP3 RECORD  
PROGRAM  
DISPLAY DIM  
OSD LANGUAGE  
SCREEN SAVER  
SLEEP  
DIVX(R) VOD CODE  
Copy protected music discs incompatible with  
CDDA standard are not recordable.  
Tracks protected by SCMS (Serial Copy  
Management System) are not recordable.  
If “USB current protection active. Device not  
supported” appears on the TV screen, the device  
is not usable with this unit because the power  
consumption of the device is too high.  
“Device not supported” or “USB current  
protection active. Device not supported” appears  
on the TV screen when you connect the USB  
device, this unit does not support the USB device.  
In this case, use a different USB device.  
During recording, do not disconnect your USB  
device or set this unit to the standby mode.  
Locking/Unlocking the disc for  
viewing  
Not all discs are rated or coded by the  
manufacturer of the disc. You can prevent  
playback of a specific disc by locking the disc.  
You can lock up to 40 discs on this unit.  
• Select [DISC LOCK] in “GENERAL  
SETUP PAGE”.  
LOCK  
Select this to lock playback of the current disc.  
Subsequent access to a locked disc requires a  
six-digit password.  
The default password is “000 000” (see  
y
About the USB devices supported by this unit, refer  
1 Connect your USB device to the USB port  
UNLOCK  
Select this to unlock the disc and allow future  
playback.  
Recording CD tracks onto your  
USB device  
You can record CD tracks onto your USB  
device connected to this unit.  
3 In “GENERAL SETUP PAGE”, press  
5/a to highlight [MP3 RECORD], and  
then press 3 to select [SETUP].  
4 Press ENTER.  
The tracks are recorded in MP3 format.  
28 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Setup Menu  
5 In “MP3 RECORD”, press 5/a to  
highlight [SPEED], and then press ENTER  
repeatedly to select the desired setting.  
The tracks may be displayed on more  
than one page in “TRACK”. In this  
case, press 5/a to select  
or  
,
and then press ENTER to scroll  
MP3 RECORD  
through pages.  
OPTION  
TRACK  
SPEED Normal  
Track 01  
03:34  
06:42  
03:42  
03:09  
02:50  
00:34  
05:15  
You can also select or deselect all the  
tracks by selecting [Select All] or  
[Deselect All].  
Track 02  
Track 03  
Track 04  
Track 05  
Track 06  
Track 07  
Bitrate 128 kbps  
SUMMARY  
9 Press 2 to return to [SPEED].  
10Press 5/a to highlight [Start], and then  
press ENTER.  
Selected  
Total Time  
Start  
0
00:00  
Exit  
Select All Deselect All  
To cancel the recording, highlight  
[CANCEL], and then press ENTER.  
Normal  
Select this to record at normal speed.  
Notes  
Fast  
Select this to record at about 2x speed.  
Recording cannot be started in the following  
conditions:  
– the connected USB device is not supported  
– no USB device is connected  
y
When you select [Normal], you can enjoy playback  
while the recording.  
– when “USB current protection active. Device  
not supported” is shown on the TV screen  
During recording, do not press any keys other  
than ENTER.  
6 Press 5/a to highlight [Bitrate], and then  
press ENTER repeatedly to select the  
desired bit rate.  
96 kbps, 128 kbps, 192 kbps, 256 kbps,  
320 kbps  
Select a bit rate for the music data.  
11When the recording is completed, press  
2 / 3/5/a to highlight [Exit] and then  
press ENTER to exit from “MP3  
RECORD” menu.  
y
Generally, the higher the bit rate, the better the  
sound quality. However, higher bit rates use more  
space on a device.  
y
The created file is named as “TRACKxxx”. In  
“xxx”, numbers from 001 to 999 are inserted in  
order.  
7 Press 3.  
8 Press 5/a to highlight the desired track in  
“TRACK”, and then press ENTER. Repeat  
this step as necessary to select the other  
tracks.  
The number of selected tracks and total  
time are shown in “SUMMARY”.  
29 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Menu  
5 Repeat steps 3-4 to input another track/  
Note  
chapter number.  
You cannot edit the files on your USB device  
connected to this unit by using this unit (for  
example, deleting or renaming the files).  
To remove a track  
6 Use 2 / 3/5/a to select the track you  
want to remove.  
Programming disc tracks  
7 Press ENTER to remove this track from  
(except MP3/WMA/WMV/JPEG/  
the program menu.  
®
DivX )  
To start program playback  
You can play back the contents of a disc in the  
desired order by programming the tracks to be  
played. You can store up to 20 tracks per disc  
with a maximum of ten discs.  
8 Use 2 / 3/5/a to highlight [START] on  
the program menu, and then press ENTER.  
Playback starts for the selected tracks in  
the programmed sequence.  
1 In “GENERAL SETUP PAGE”, press  
5/a to highlight [PROGRAM], and then  
press 3 to select [INPUT MENU].  
To exit from program playback  
9 Use 2 / 3/5/a to highlight [EXIT] on  
the program menu, and then press ENTER.  
2 Press ENTER.  
The input menu appears on the TV  
screen.  
Dimming the front panel display  
You can select different levels of brightness  
for the front panel display.  
PROGRAM: TRACK (01-17)  
6
7
8
9
_ _  
_ _  
_ _  
_ _  
1
2
3
4
5
04  
10  
_ _  
_ _  
_ _  
Select [DISPLAY DIM] in  
“GENERAL SETUP PAGE”.  
10 _ _  
START  
100%  
EXIT  
NEXT  
Select this for full brightness.  
70%  
To input your favorite tracks/  
Select this for medium brightness.  
chapters  
40%  
3 Use the numeric buttons (0-9) to enter a  
Select this for dimming display.  
valid track/chapter number.  
4 Use 2 / 3/5/a to move the cursor to the  
OSD language  
next position.  
This menu contains various options for the on-  
screen display (OSD) language. For details,  
If the track/chapter number is more  
than ten, press 33l to move to the next  
page, and then proceed with  
programming.  
OR  
Use 2 / 3/5/a to highlight [NEXT]  
on the program menu, and then press  
ENTER.  
30 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Setup Menu  
2 Press ENTER to exit.  
Setting the screen saver  
This function is used to turn on or off the  
screen saver.  
y
To purchase or rent the videos from DivX® VOD  
code and download the video onto a CD-R for  
playback on this unit.  
• Select [SCREEN SAVER] in “GENERAL  
SETUP PAGE”.  
ON  
Notes  
Select this to turn off the TV screen when disc  
playback is stopped or paused for more than  
15 minutes.  
All of the downloaded videos from DivX® VOD  
can only be played back on this unit.  
For DivX®, the time search feature is not  
available.  
OFF  
Select this to disable the screen saver function.  
Setting the sleep timer  
This feature automatically sets this unit to the  
standby mode after a certain elapsed period.  
Audio setup menu  
• Select [SLEEP] in “GENERAL SETUP  
PAGE”.  
AUDIO SETUP PAGE  
ANALOG OUTPUT  
DIGITAL AUDIO  
HDMI AUDIO  
30 MINS, 60 MINS, 90 MINS, 120 MINS,  
150 MINS  
NIGHT MODE  
Select one of them to set the sleep timer  
function.  
OFF  
Select this to cancel the sleep timer function.  
y
Setting the analog output  
Set the analog output to match the playback  
capability of this unit.  
The sleep timer setting can also be deactivated if this  
unit is set to the standby mode.  
®
Displaying the DivX VOD  
registration code  
Yamaha provides you with a DivX VOD  
(Video On Demand) registration code that  
allows you to rent and purchase videos using  
the DivX VOD service.  
For more information, visit  
Select [ANALOG OUTPUT] in  
“AUDIO SETUP PAGE”.  
®
STEREO  
Select this to change channel output to stereo,  
which only delivers sound from the two front  
speakers.  
®
LT/RT  
Select this if this unit is connected to a Dolby  
Pro Logic decoder.  
1 In “GENERAL SETUP PAGE”, press  
5/a to highlight [DIVX(R) VOD CODE],  
and then press 3.  
The registration code appears.  
31 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Setup Menu  
96KHz  
Setting the digital output  
Select this to play back discs recorded at the  
sampling rate of 96 kHz. If the 96 kHz disc is  
copy protected, the digital output is  
automatically converted to the sampling rate of  
48 kHz. 48 kHz PCM data streams are output at  
48 kHz.  
The [DIGITAL AUDIO] options are:  
[DIGITAL OUTPUT] and [LPCM OUTPUT].  
1 In “AUDIO SETUP PAGE”, press 5/a to  
highlight [DIGITAL AUDIO], and then  
press 3.  
2 Press 5/a to highlight an option.  
3 Press 3.  
4 Press 5/a to select a setting, and then  
press ENTER.  
DIGITAL OUTPUT  
Set the digital output according to your  
optional audio component connections.  
Turning the HDMI audio on/off  
When you connect this unit to an HDMI  
compatible component via the HDMI jack,  
select to turn on or off the HDMI audio output.  
OFF  
Select this to turn off the digital output.  
Select [HDMI AUDIO] in “AUDIO  
SETUP PAGE”.  
ALL  
Select this if you have connected the digital  
audio output jack to a multi-channel decoder/  
receiver.  
ON  
Select this to turn on the HDMI audio output.  
PCM ONLY  
OFF  
Select this only if your receiver is not capable  
of decoding multi-channel audio signals.  
Select this to turn off the HDMI audio output.  
Notes  
y
Even if “ALL” is selected, this unit converts  
MPEG audio into 2 channel PCM and then  
outputs to the connected component.  
When “PCM ONLY“ is selected, DTS digital  
signal is muted.  
If you are not using the HDMI audio output, set  
this to [OFF].  
If the monitor/receiver connected to this unit  
using HDMI does not support HDMI audio signal  
input, set this to [OFF].  
When audio signals are being output by HDMI-  
compatible components, digital signals output at  
the coaxial jack of this unit are muted.  
When [DIGITAL OUTPUT] is set to [OFF] on  
this unit, HDMI audio signal is not output even if  
[HDMI AUDIO] is set to [ON] and an HDMI  
connection is established between the monitor  
and receiver.  
When [DIGITAL OUTPUT] is set to [ALL] on  
this unit, PCM signals are still output if the  
monitor and receiver only support the PCM  
format. However, the HDMI audio signal is  
muted when audio format plays back the DTS  
source.  
LPCM OUTPUT  
Select this if you have connected this unit to a  
PCM-compatible receiver via a digital jack,  
such as the coaxial jack. In this case, you may  
need to adjust [LPCM OUTPUT].  
Discs are recorded at a certain sampling rate.  
The higher the sampling rate, the better the  
sound quality.  
48KHz  
Select this to play back discs recorded at the  
sampling rate of 48 kHz. All 96 kHz PCM data  
streams (if available) are converted to the  
sampling rate of 48 kHz.  
32 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Setup Menu  
y
TV type  
This unit can output the following audio signals  
using HDMI: 32/44.1/48 kHz, 2ch linear PCM  
signals and bitstream signals (Dolby Digital and  
DTS).  
This menu contains the options for selecting  
the color system that matches your TV. For  
Turning the night mode on/off  
Setting the TV display  
In the night mode, high volume output is  
softened and low volume output is brought  
upward to an audible level. It is useful when  
you want to watch your favorite action movie  
without disturbing others at night.  
Set the aspect ratio of this unit to match your  
TV. The format you select must be available  
on the disc. Otherwise, the TV display setting  
will not affect the picture during playback.  
Select [NIGHT MODE] in “AUDIO  
SETUP PAGE”.  
Select [TV DISPLAY] in “VIDEO  
SETUP PAGE”.  
ON  
4:3 PAN SCAN  
Select this to level out the volume. This  
feature is only available for movies with the  
Dolby Digital mode.  
Select this if the aspect ratio of your TV is 4:3  
and you want both sides of the picture to be  
trimmed or formatted to fit your TV screen.  
When you select this setting, invalidate the  
dynamic range compression (DRC) of the  
connected component.  
4:3 LETTER BOX  
Select this if the aspect ratio of your TV is 4:3.  
In this case, a wide picture with black bands  
on the upper and lower portions of the TV  
screen are displayed.  
OFF  
Select this when you want to enjoy the full  
dynamic range of surround sound.  
16:9  
Select this if you have a widescreen TV.  
The relationship between the setting  
Video setup menu  
of this unit and the TV display  
When the aspect ratio of your TV is 4:3:  
Playback  
disc  
TV display  
Setting  
VIDEO SETUP PAGE  
TV TYPE  
TV DISPLAY  
16:9  
1
*
PROGRESSIVE  
PICTURE SETTING  
BLACK LEVEL  
CLOSED CAPTION  
4:3 PAN  
SCAN  
4:3  
16:9  
4:3  
.......COMPONENT  
*
HDMI SETUP  
: [COMPONENT] is only for Europe and  
Russia models.  
*
4:3 LETTER  
BOX  
33 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Setup Menu  
Notes on activating progressive scan:  
• Ensure that your TV is equipped with  
progressive scan.  
• Connect using a component video cable.  
• When making HDMI connections, you  
cannot select [PROGRESSIVE].  
When the aspect ratio of your TV is 16:9  
(widescreen):  
Playback  
disc  
TV display  
Setting  
16:9  
• (Europe and Russia models only) When  
[COMPONENT] is set to [RGB] (see  
16:9  
4:3  
2
*
[PROGRESSIVE].  
• You can turn off the progressive scan  
without using the setup mode if no picture is  
displayed. See “No picture is displayed  
when you do not use progressive scan  
connections (using the component video  
jacks)” in “Troubleshooting” on page 43.  
*1: If the disc is not assigned to playback in  
panscan, it is played in letterbox.  
*2: The side of the picture may be stretched  
depending on the TV. In this case, check the  
screen size and aspect ratio of your TV.  
Turning the progressive scan  
function on/off  
This feature is only available if you have  
connected this unit to a progressive scan TV  
through the component video jacks (see  
Adjusting picture settings  
This unit comes with three predefined sets of  
picture color settings and one personal setting  
that you can define yourself.  
1 In “VIDEO SETUP PAGE”, press 5/a to  
highlight [PICTURE SETTING], and then  
press 3.  
Select [PROGRESSIVE] in “VIDEO  
SETUP PAGE”.  
OFF  
STANDARD  
Select this to disable the progressive scan  
function.  
Select this for the standard picture setting.  
BRIGHT  
ON  
Select this to make the TV picture brighter.  
Select this to enable the progressive scan  
function.  
SOFT  
Select this to make the TV picture softer.  
PERSONAL  
Select this to personalize your picture color by  
adjusting the brightness, contrast, tint and  
color (saturation).  
2 Press 5/a to select a setting, and then  
press ENTER.  
3 If you select [PERSONAL] in step 1,  
proceed to steps 4-7.  
34 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Setup Menu  
The “PERSONAL PICTURE SETUP”  
Turning the black level on/off  
menu appears.  
When [TV TYPE] is set to [NTSC] (see  
page 14), this menu is effective for improving  
the visibility of the black color in the dark area  
on the screen. The black level setting has no  
effect if [TV TYPE] is set to [PAL].  
PERSONAL PICTURE SETUP  
BRIGHTNESS  
CONTRAST  
TINT  
0
0
0
0
Select [BLACK LEVEL] in “VIDEO  
SETUP PAGE”.  
COLOR  
ON  
Select this to improve the visibility of the  
black color.  
4 Press 5/a to select one of the following  
OFF  
options.  
Select this for the standard black level setting.  
BRIGHTNESS  
Adjust the brightness of the picture. Zero (0) is  
the average brightness setting value.  
Note  
This function is only available for composite video /  
S-video output.  
CONTRAST  
Adjust the contrast of the picture. Zero (0) is  
the average contrast setting value.  
Turning the closed caption on/off  
TINT  
Closed captions are data hidden in the video  
signals of specific discs and are invisible  
without the use of a special decoder. The  
difference between subtitles and captions is  
that subtitles are intended for hearing persons  
and captions are for the hearing impaired.  
Subtitles rarely show all of the audio. For  
example, captions show sound effects (e.g.,  
“phone ringing”, “footsteps”), while subtitles  
do not.  
Adjust the balance of red and green of the  
picture. Zero (0) is the average tint setting  
value.  
COLOR  
Adjust the color level of the picture. Zero (0) is  
the average color setting value.  
5 Press 2 / 3 to adjust the setting that best  
suits your personal preference.  
6 Repeat steps 4-5 to adjust other color  
features.  
Before you select this function, ensure that the  
disc contains closed caption information and  
your TV also supports this function.  
7 Press ENTER.  
Select [CLOSED CAPTION] in  
“VIDEO SETUP PAGE”.  
ON  
Select this to enable the closed caption  
function.  
OFF  
Select this to disable the closed caption  
function.  
35 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Setup Menu  
SUPERWIDE  
Note  
Select to display a 4:3 image on the 16:9 screen  
with non-linear stretching (center position of  
screen is stretched less than the sides).  
This function is only available for NTSC video  
format and composite video / S-video output.  
4:3 PILLAR BOX  
Select to display a 4:3 image on the 16:9 screen  
without stretching. When playing a disc  
recorded in the 16:9 image, the image is  
displayed in its original aspect ratio (16:9)  
without pillar boxes.  
Switching YUV/RGB  
(Europe and Russia models only)  
This setting allows you to toggle the output of  
the video signal between YUV (on VIDEO  
OUT - COMPONENT) and RGB (on  
SCART).  
OFF  
No aspect ratio adjustment is made when this  
option is selected.  
Select [COMPONENT] in “VIDEO  
SETUP PAGE”.  
Note  
YUV  
When the video signal is 480p or 576p, you cannot  
select [WIDE SCREEN FORMAT], and no aspect  
ratio adjustment is made even if [SUPERWIDE] or  
[4:3 PILLAR BOX] is selected.  
Select this for the component video  
connection.  
RGB  
Select this for SCART connection.  
HDMI VIDEO  
Set the resolution depending on the monitor  
you are using. This unit is compatible with the  
following video formats:  
480p/60Hz, 576p/50Hz, 720p/50Hz, 60Hz,  
1080i/50Hz, 60Hz, and 1080p/50Hz, 60Hz  
Setting the HDMI video  
When you connect this unit to an HDMI  
compatible component via the HDMI jack,  
select the following video output settings  
depending on the connected component.  
480P  
1 In “VIDEO SETUP PAGE”, press 5/a to  
highlight [HDMI SETUP], and then press  
3.  
480 progressive-scan video  
576P  
576 progressive-scan video  
2 Press 5/a to highlight an option.  
3 Press 3 to enter a submenu.  
720P  
720 progressive-scan video  
1080I  
1080 interlaced video  
WIDE SCREEN FORMAT  
Set the aspect ratio of the projected images on  
the screen. This feature is only available when  
making HDMI connections and [TV  
DISPLAY] is set to [16:9] (see page 33) when  
playing back 4:3 image.  
1080P  
1080 progressive-scan video  
AUTO  
The resolution is automatically selected to  
match the monitor you are using.  
36 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Setup Menu  
Notes  
Preference setup menu  
For the settings other than [AUTO], images may  
Press  
7
twice to stop playback (if necessary)  
not be displayed properly if a resolution output  
setting is not supported by the HDMI component  
you are using. In that case, follow the steps below  
to return to [AUTO].  
before pressing SET UP.  
1 Press OPEN/CLOSE (  
to open the disc tray.  
2 Press 2.  
) on the front panel  
PREFERENCE PAGE  
AUDIO  
SUBTITLE  
DISC MENU  
PARENTAL  
VR LIST  
3 Press SUBTITLE.  
You cannot set [TV TYPE], [PROGRESSIVE],  
and [COMPONENT] (Europe and Russia  
models) when making HDMI connections.  
When disconnecting the HDMI cable, the setting  
of [TV TYPE] may be changed. If the component  
video, S-video, or composite video signal is not  
output correctly, see “Completely distorted  
picture, black/white picture, or no picture” in  
“Troubleshooting” on page 43 to set the correct  
TV type again.  
DATA DISC NAV  
.......DIVX SUBTITLE  
*
PBC  
: [DIVX SUBTITLE] is available for the  
models other than Korea model.  
*
Audio, subtitle and disc menu  
These menus contain various language options  
for the audio, subtitles, and disc menus  
recorded on the DVD-Video. For details, see  
HD JPEG  
This unit can display High-Definition JPEG  
images when connecting to an HDMI  
component using HDMI cable.  
ON  
Displays JPEG pictures with high quality.  
Restricting playback with parental  
control  
OFF  
Displays JPEG pictures with standard quality.  
Some DVDs may have a parental level  
assigned to the complete disc or to certain  
scenes on the disc. This feature lets you set a  
playback limitation level.  
The rating levels are from 1 to 8 and are  
country dependent. You can prohibit playback  
of certain discs that are not suitable for your  
children or play certain discs in alternative  
scenes.  
Notes  
You can select [HD JPEG] when the HDMI video  
signals with 720p, 1080i, and 1080p are output.  
You cannot select [HDMI SETUP] when JPEG  
(including HD JPEG) pictures are displayed.  
37 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Setup Menu  
ORIGINAL LIST  
Select this to play the originally recorded titles  
on the disc.  
1 In “PREFERENCE PAGE”, press 5/a to  
highlight [PARENTAL], and then press 3.  
PLAY LIST  
Select this to play the edited version of the  
disc. This feature is only available when a play  
list has been created.  
PREFERENCE PAGE  
AUDIO  
1 KID SAFE  
2 G  
SUBTITLE  
DISC MENU  
PARENTAL  
VR LIST  
3 PG  
4 PG 13  
5 PGR  
6 R  
2 Press 5/a to highlight a setting, and then  
press ENTER.  
DATA DISC NAV  
DIVX SUBTITLE  
PBC  
7 NC17  
8 ADULT  
.......  
To play back a disc in VR format  
3 Press SET UP to close the setup menu.  
*
: [DIVX SUBTITLE] is available for the  
models other than Korea model.  
*
4 Press 3/8 to begin to play back the disc  
with the setting you selected.  
2 Press 5/a to highlight a rating level for  
the inserted disc, and then press ENTER.  
Selecting the data disc menu  
Data disc navigator can be set only if the disc  
was recorded with a menu. It allows you to  
display folder menus when playing back a disc  
with folder structure.  
To disable parental controls and have  
all discs play, select [8 ADULT].  
3 Use the numeric buttons (0-9) to enter  
the six-digit password (see “Changing the  
Select [DATA DISC NAV] in  
“PREFERENCE PAGE”.  
DVD discs that are rated above the  
level you selected do not play unless  
you enter your six-digit password.  
WITHOUT MENU  
Select this to display all the files contained in  
the data disc.  
Note  
WITH MENU  
Some DVD discs are not encoded with a rating  
though the movie rating may be printed on the disc  
cover. The rating level feature does not work for  
such discs.  
Select this to display only the folder menu of  
the data disc.  
®
Selecting DivX external subtitle  
group (except Korea model)  
Selecting playback of VR format  
The font sets listed below are available for  
There are two ways to play back a disc in VR  
(Video Recording) format: ORIGINAL and  
PLAY LIST.  
®
DivX external subtitle files. This setting  
allows you to see the proper font set on-screen  
to match the subtitle file.  
1 In “PREFERENCE PAGE”, press 5/a to  
highlight [VR LIST], and then press 3.  
Select [DIVX SUBTITLE] in  
“PREFERENCE PAGE”.  
38 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Setup Menu  
GROUP1:  
Selecting the PBC (playback  
control) function  
You can set playback control (PBC) to on or  
off. This function is available only on Video  
CD 2.0 with the playback control (PBC)  
feature.  
Albanian (sq), Basque (eu), Catalan (ca),  
Danish (da), Dutch (nl), English (en),  
Faroese (fo), Finnish (fi), French (fr),  
German (de), Icelandic (is), Irish (ga),  
Italian (it), Norwegian (no),  
Portuguese (pt), Rhaeto-Romanic (rm),  
Scottish (gd), Spanish (es), Swedish (sv)  
Select [PBC] in “PREFERENCE  
PAGE”.  
GROUP2:  
Albanian (sq), Croatian (hr), Czech (cs),  
Hungarian (hu), Polish (pl), Romanian (ro),  
Slovak (sk), Slovenian (sl)  
ON  
Select this to display a disc menu.  
OFF  
GROUP3:  
Select this not to display a disc menu.  
Playback starts from the beginning of a disc.  
Bulgarian (bg), Byelorussian (be),  
Macedonian (mk), Russian (ru), Serbian (sr),  
Ukrainian (uk)  
y
You can also use the MENU button on the remote  
control to turn on or off the playback control (PBC)  
GROUP4:  
Hebrew (iw), Yiddish (ji)  
GROUP5:  
Turkish (tr)  
Setting the auto standby function  
You can set auto standby function to on or off.  
Notes  
Some external subtitle files may be displayed  
incorrectly or not at all.  
Select [AUTO STANDBY] in  
“PREFERENCE PAGE”.  
Some discs cannot be played depending on disc  
characteristics or recording conditions.  
The number of external subtitle files that can be  
switched for the same movie file is limited to a  
maximum of ten.  
ON  
Select this to set this unit to the standby mode  
automatically when disc playback is stopped  
or paused for more than 30 minutes.  
y
OFF  
For external subtitle files, the following subtitle  
Select this to disable the auto standby  
function.  
format filename extensions are supported (note  
that these files are not shown within the disc  
menu): .srt, .sub, .ssa, .smi  
The filename of the movie file has to be repeated  
at the beginning of the filename for the external  
subtitle file.  
39 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Setup Menu  
4 Enter the new six-digit password.  
Changing the password  
5 Enter the new six-digit password again to  
The same password is used for both parental  
control and disc lock. Enter your six-digit  
password when prompted on the screen. The  
default password is 000 000.  
confirm the password.  
6 Press ENTER to confirm your new  
password.  
The new six-digit password is now  
1 In “PREFERENCE PAGE”, press 5/a to  
highlight [PASSWORD], and then press 3  
to select [CHANGE].  
valid.  
Resetting the system  
You can reset all options and your personal  
settings to the initial factory settings,  
excluding [PASSWORD], [PARENTAL], and  
[DISC LOCK].  
PREFERENCE PAGE  
PARENTAL  
VR LIST  
DATA DISC NAV  
.......DIVX SUBTITLE  
1 In “PREFERENCE PAGE”, press 5/a to  
highlight [DEFAULT], and then press 3  
to select [RESET].  
*
PBC  
AUTO STANDBY  
PASSWORD  
DEFAULT  
CHANGE  
2 Press ENTER.  
: [DIVX SUBTITLE] is available for the  
models other than Korea model.  
All settings are reset to the initial  
*
factory settings.  
2 Press ENTER to enter the “Password  
Change Page”.  
OLD PASSWORD  
NEW PASSWORD  
CONFIRM PWD  
OK  
3 Use the numeric buttons (0-9) to enter  
your old six-digit password.  
When doing this for the first time, enter  
“000 000”.  
If you forget your old six-digit  
password, enter “000 000”.  
40 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Language Codes  
Language Codes  
These codes can be used to select other languages. This does not affect the options in  
“AUDIO”, “SUBTITLE”, or “DISC MENU”.  
Abkhazian  
Afar  
6566 Gaelic  
6565 Gallegan  
6570 Georgian  
8381 German  
6577 Gikuyu  
6582 Greek  
7168 Macedonian  
7176 Malagasy  
7565 Malay  
7775 Sardinian  
7771 Scottish Gaelic  
7783 Serbian  
7776 Shona  
8367  
7168  
8382  
8378  
8368  
8373  
8375  
8376  
8379  
8384  
7882  
6983  
8385  
8387  
8383  
8386  
8476  
8489  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
Afrikaans  
Albanian  
Amharic  
Arabic  
6869 Malayalam  
7573 Maltese  
7784 Sindhi  
6976 Manx  
7186 Sinhalese  
7773 Slovak  
Armenian  
Assamese  
Avestan  
Aymara  
Azerbaijani  
Bashkir  
7289 Guarani  
6583 Gujarati  
6569 Hausa  
7178 Maori  
7185 Marathi  
7782 Slovenian  
7772 Somali  
7779 Sotho, Southem  
7778 South Ndebele  
7865 Spanish  
7886 Sundanese  
7886 Swahili  
7868 Swati  
7265 Marshallese  
7269 Moldavian  
7290 Mongolian  
7273 Nauru  
6589 Hebrew  
6590 Herero  
6665 Hindi  
Basque  
6985 Hiri Motu  
6669 Hungarian  
6678 Icelandic  
6672 Ido  
7279 Navaho  
Belarusian  
Bengali  
7285 Navajo  
7383 Ndebele, North  
7379 Ndebele, South  
7368 Ndonga  
Bihari  
7882 Swedish  
7871 Tagalog  
7869 Tahitian  
8369 Tajik  
Bislama  
Bokmål, Norwegian  
Bosnian  
Breton  
6673 Indonesian  
7866 Interlingua (International) 7365 Nepali  
6683 Interlingue  
6682 Inuktitut  
6671 Inupiaq  
7789 Irish  
7369 Northern Sami  
7385 North Ndebele  
7375 Norwegian  
7165 Norwegian Bokmål  
7384 Norwegian Nynorsk  
7465 Nyanja  
7868 Tamil  
Bulgarian  
Burmese  
Castilian  
Catalan  
7879 Tatar  
7866 Telugu  
7878 Thai  
6983 Italian  
6765 Japanese  
6772 Javanese  
6769 Kalaallisut  
7889 Kannada  
7889 Kashmiri  
9072 Kazakh  
9065 Khmer  
7889 Tibetan  
7878 Tigrinya  
Chamorro  
Chechen  
Chewa  
7486 Nynorsk, Norwegian  
7576 Occitan (post 1500)  
7578 Old Bulgarian  
7583 Old Church Slavonic  
7575 Old Slavonic  
7577 Oriya  
7967 Tonga (Tonga Islands) 8479  
6785 Tsong  
6785 Tswana  
6785 Turkish  
7982 Turkmen  
7977 Twi  
8483  
8478  
8482  
8475  
8487  
8571  
8575  
8582  
8590  
8673  
8679  
8765  
6789  
8779  
8872  
8973  
8979  
9065  
9085  
Chichewa  
Chinese  
Chuang  
Church Slavic  
Church Slavonic  
Chuvash  
Cornish  
6785 Kikuyu  
7573 Oromo  
6785 Kinyarwanda  
6786 Kirghiz  
7587 Komi  
8287 Ossetian  
7983 Uighur  
7983 Ukrainian  
8073 Urdu  
8065 Uzbek  
7065 Vietnamese  
8076 Volapük  
8084 Walloon  
7967 Welsh  
8083 Wolof  
8185 Xhosa  
8277 Yiddish  
8279 Yoruba  
8278 Zhuang  
8285 Zulu  
7589 Ossetic  
7586 Pali  
Corsican  
Croatian  
Czech  
6779 Korean  
7579 Panjabi  
7282 Kuanyama  
6783 Kurdish  
6865 Kwanyama  
7876 Lao  
7574 Persian  
7585 Polish  
Danish  
7574 Portuguese  
7679 Provençal  
7665 Pushto  
Dutch  
Dzongkha  
English  
6890 Latin  
6978 Latvian  
6979 Letzeburgesch  
6984 Limburgan  
7079 Limburger  
7074 Limburgish  
7073 Lingala  
7082 Lithuanian  
7089 Luxembourgish  
7686 Quechua  
Esperanto  
Estonian  
Faroese  
7666 Raeto-Romance  
7673 Romanian  
7673 Rundi  
Fijian  
7673 Russian  
Finnish  
7678 Samoan  
8377  
French  
7684 Sango  
8371  
Frisian  
7666 Sanskrit  
8365  
41 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
Troubleshooting  
Refer to the chart below when this unit does not function properly. If the problem you are  
experiencing is not listed below or if the instruction below does not help, set this unit to the  
standby mode, disconnect the power cable, and contact the nearest authorized Yamaha  
dealer or service center.  
Problem  
Solution  
Connect the AC power cable properly.  
No power  
Press STANDBY/ON on the front panel to turn on the power.  
This unit cannot read CD or  
DVD  
Use a commonly available CD/DVD lens cleaner to clean the lens  
before sending this unit for repair.  
“NO DISC” appears in the front  
panel display  
Check that the disc is placed in the disc tray correctly.  
“UN DISC” appears in the front  
panel display  
The disc being loaded is not supported by this unit. Check the disc type  
Disc or file does not play  
The CD-R/RW, DVD+R/RW/R DL, and DVD-R/RW/R DL must be  
finalized.  
Check that the disc label is facing up.  
Check whether the disc is defective by trying another disc.  
If you have recorded a JPEG, MP3, or WMA disc yourself, check that  
your disc contains at least ten JPEG picture files or five MP3/WMA  
music tracks.  
Check the region code (see “Region codes” on page 3).  
For MP3/WMA, check that the sampling rate and bit rate are  
compatible.  
For JPEG, check that the resolution is compatible (see “Specifications”  
For WMA/WMV, check that the file is not protected by DRM (Digital  
Rights Management).  
For WMV, check that the file has been encoded by WMV9.  
For WMV, check that the file is not Advanced Profile.  
For WMV, check that the resolution of the file is 720 x 480/720 x 576  
pixels or less.  
No picture  
Refer to the manual supplied with your TV to select the video input  
channel correctly. Change the TV channel until you see the DVD  
screen.  
Turn on your TV.  
Check the video connection.  
No picture is displayed when  
you make HDMI connections  
(using the HDMI jacks)  
Follow the steps below to change the [HDMI VIDEO] to [AUTO].  
1. Press OPEN/CLOSE (  
) on the front panel or press and hold  
7
on the remote control to open the disc tray.  
2. Press 2 on the remote control.  
3. Press SUBTITLE on the remote control.  
42 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
Problem  
Solution  
Follow the steps below to turn off the progressive scan.  
1. Press OPEN/CLOSE ( ) on the front panel or press and hold  
on the remote control to open the disc tray.  
2. Press 2 on the remote control.  
3. Press ZOOM on the remote control to deactivate the progressive  
No picture is displayed when  
you do not use progressive  
scan connections (using the  
component video jacks)  
7
scan.  
Completely distorted picture,  
black/white picture, or no  
picture  
Check that the disc is compatible with this unit (see “Playable disc  
Check that the TV type of this unit is set to match that of the disc and  
the steps below to change the setting of [TV TYPE].  
1. Press OPEN/CLOSE (  
) on the front panel or press and hold  
7
on the remote control to open the disc tray.  
2. Press 3 on the remote control.  
3. Press AUDIO on the remote control.  
Distorted picture  
Occasionally, a small amount of picture distortion may appear  
depending on the disc being played back. This is not a malfunction.  
Check the video connection.  
Picture freezes momentarily  
during playback  
Check the disc for fingerprints/scratches and clean it with a soft cloth  
wiping from center to edge.  
®
For WMV/DivX , lowering the bit rate may improve the problem.  
HD JPEG pictures cannot be  
displayed  
Check that [HD JPEG] is set to [ON] (see page 37).  
The disc reading time may exceed 30 seconds.  
MP3 music and HD JPEG pictures cannot be played simultaneously.  
The screen size looks  
unnatural, or the caption is  
displayed only partially on the  
TV monitor or is not displayed  
at all  
Check that the TV setting of this unit matches the screen size of your  
Change the screen size and the aspect ratio of your TV.  
No sound or distorted sound  
Adjust the volume.  
Check that the speakers are connected correctly.  
Check the audio connection.  
For MP3/WMA, check that the sampling rate and bit rate are  
compatible with this unit (see “Specifications” on page 48).  
®
For WMV/DivX , record the file onto your USB device at a lower  
bit rate.  
No audio at digital output  
Check the digital connections.  
If you are playing a DTS source, check that your receiver can decode  
DTS, and that [DIGITAL OUTPUT] is set to [ALL] (see page 32).  
Check that the audio format of the selected audio language matches  
your receiver capabilities.  
®
No sound during DivX movie  
The audio code may not be supported by this unit.  
playback  
This unit does not respond to  
the remote control  
Aim the remote control directly at the remote control sensor on the front  
panel.  
Reduce the distance of the remote control from this unit.  
Replace the batteries in the remote control.  
Reinsert the batteries with their polarities (+/– signs) as indicated.  
43 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Problem  
Solution  
Buttons do not work  
To completely reset this unit, unplug the AC cord from the AC outlet  
for 5-10 seconds, plug the AC cord to the AC outlet again, and then turn  
on this unit.  
This unit does not respond to  
some operating commands  
during playback  
Some operations may not be permitted by the disc. Refer to the  
instructions of the disc jacket.  
Menu items cannot be selected Press  
7
twice on the remote control before selecting the setup menu.  
Depending on the disc availability, some menu items cannot be  
selected.  
Your USB device cannot be  
recognized  
Check that your USB device is connected correctly.  
Some devices may not be used even if they are USB mass storage class  
devices.  
Set this unit to the standby mode, and then turn it on again.  
Disconnect your USB device when this unit is in the standby mode, then  
connect it again and turn on this unit.  
Connect the AC adapter if the adapter is supplied with your USB  
device.  
If “Device not supported” appears on the TV screen, check whether  
your USB device is supported by this unit (see “Supported USB  
If “USB current protection active. Device not supported” appears on the  
TV screen, your USB device is not usable with this unit (see “Supported  
This unit does not record CD  
tracks onto your USB device  
Check that your USB device is connected correctly.  
Check that your USB device is compatible with this unit.  
Tracks protected by SCMS (Serial Copy Management System) are  
not recordable.  
Copy protected music discs incompatible with CDDA standard are  
not recordable.  
44 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Problem  
Solution  
This unit stops recording CD  
tracks onto your USB device  
If “Max files reached” appears on the TV screen, delete any files you do  
not need or create a new folder and then move some files to the created  
folder so that the number of files on a root directory in your USB device  
is reduced. This unit can record up to 648 files on each root directory. In  
case the above message appears, press ENTER to cancel the recording.  
If “USB full” appears on the TV screen, delete any files you do not need  
so that there is enough space in your USB device. In case the above  
message appears, press ENTER to cancel the recording.  
If “Max tracks reached” appears on the TV screen, rename  
“TRACK999” by using PC, etc. or create a new folder and then move  
the file to the created folder. In case the above message appears, press  
ENTER to cancel the recording.  
If “USB device error” appears on the TV screen, check the connection  
between this unit and the USB device. In case the above message  
appears, press ENTER to cancel the recording.  
If “Disc error” appears on the TV screen, check the disc for  
fingerprints/scratches and clean it with a soft cloth wiping from center  
to edge. In case the above message appears, press ENTER to cancel the  
recording.  
If “Copy protected” appears on the TV screen, check that the track is  
not protected by SCMS (Serial Copy Management System). Tracks  
protected by SCMS are not recordable. In case the above message  
appears, press ENTER to cancel the recording.  
The MP3 file recorded on your  
USB device by using “MP3  
RECORD” does not play or  
stops during playback  
If the recording has been canceled, playback stops at the canceled point.  
Try recording again.  
If “USB full”, “USB device error”, or “Disc error” has appeared on the  
TV screen during the recording, created files cannot be played. Refer to  
“This unit stops recording CD tracks onto your USB device” to solve  
the problem and then try recording again.  
The sound of recorded music  
on your USB device is low-  
quality, skips, or contains  
unexpected noise  
Check the CD (e.g., sound quality, noise, or fingerprints/scratches).  
45 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
Glossary  
®
Analog  
DivX Ultra  
®
Sound that has not been converted into numerical  
values. Analog sound varies, while digital sound has  
specific numerical values. These jacks send audio  
through two channels, the left and right.  
DivX Ultra Certified products provide enhanced  
playback of advanced media features supported by the  
DivX Media Format. Key features include interactive  
video menus, subtitles, alternate audio tracks, video  
tags, and chapter points.  
®
Aspect ratio  
®
The ratio of vertical and horizontal sizes of a displayed  
image. The horizontal vs. vertical ratio of conventional  
TVs is 4:3, and that of wide-screens is 16:9.  
DMF (DivX Media Format)  
®
The DivX Media Format supports advanced media  
features, adding controls for an interactive media  
experience: interactive video menus, chapter points,  
multi-language subtitles, and alternate audio tracks.  
Audio output jacks  
Jacks on the back of the DVD player that send audio to  
another system (TV, Stereo, etc.).  
Dolby Digital  
A surround sound system developed by Dolby  
Laboratories containing up to six channels of digital  
audio (front left and right, surround left and right, center  
and subwoofer).  
Bit rate  
The amount of data used to hold a given length of  
music, measured in kilobits per seconds, or kbps. Or,  
the speed at which you record. Generally, the higher the  
bit rate, or the higher the recording speed, the better the  
sound quality. However, higher bit rates use more space  
on a disc.  
DTS  
Digital Theatre Systems. This is a surround sound  
system, but it is different from Dolby Digital. The  
formats were developed by different companies.  
Chapter  
Sections of a picture or a music piece on a DVD that are  
smaller than titles. A title is composed of several  
chapters. Each chapter is assigned a chapter number  
enabling you to locate the chapter you want.  
HDCP  
HDCP (High-bandwidth Digital Content Protection)  
developed by Intel corporation, is a method to encrypt  
digital video and audio data for purpose of content  
protection. For further information on HDCP, visit the  
HDCP website at “www.digital-cp.com”.  
Component video output jacks  
Jacks on the back of the DVD player that send high-  
quality video to a TV that has component video input  
jacks (R/G/B, Y/PB/PR, etc.).  
HD JPEG  
HD (High-Definition) JPEG provides images in their  
enhanced resolution via HDMI connection.  
Disc menu  
A screen display prepared for allowing selection of  
images, sounds, subtitles, multi-angles, etc. recorded on  
a DVD.  
HDMI  
HDMI (High-Definition Multimedia Interface) is the  
first industry-supported, uncompressed, all-digital A/V  
(audio/video) interface. Providing an interface between  
any A/V source (such as a set-top box or A/V receiver)  
and an audio/video monitor (such as a digital television-  
DTV), HDMI supports standard, enhanced or high-  
definition video as well as multi-channel digital audio  
using a single cable. HDMI transmits all ATSC  
(Advanced Television Systems Committee) HDTV  
standards and supports 8-channel digital audio, with  
bandwidth extra to accommodate future enhancements  
and requirements.  
Digital  
Sound that has been converted into numerical values.  
Digital sound is available when you use the digital  
audio output jacks. These jacks send audio through  
multiple channels, instead of just two channels as  
analog does.  
®
DivX  
®
DivX is a popular media technology created by DivX,  
®
Inc. DivX media files contain highly compressed  
video with high visual quality that maintains a relatively  
When used in combination with HDCP (High-  
bandwidth Digital Content Protection), HDMI provides  
a secure audio/video interface that meets the security  
requirements of content providers and system  
operations. For further information on HDMI, visit the  
HDMI website at “www.hdmi.org/”.  
®
small file size. DivX files can also include advanced  
media features like menus, subtitles, and alternate audio  
®
tracks. Many DivX media files are available for  
download online, and you can create your own using  
your personal content and easy-to-use tools from  
DivX.com.  
46 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Glossary  
Interactive menu  
Region code  
Interactive video menus offer unprecedented  
convenience and control so you can quickly navigate  
between various scenes or bonus features, and select  
from audio track and subtitle options.  
A system for allowing discs to be played back only in  
the region designated beforehand. This unit will only  
play discs that have compatible region codes. You can  
find the region code of your unit by looking on the  
product label. Some discs are compatible with more  
than one region (or ALL regions).  
JPEG  
A very common digital still picture format. A still-  
picture data compression system proposed by the Joint  
Photographic Expert Group, which features small  
decrease in image quality in spite of its high  
compression ratio.  
S-video  
Produces a clear picture by sending separate signals for  
the luminance and the color. You can use S-video only  
if your TV has S-video input jack.  
MP3  
Surround  
A file format with a sound data compression system.  
“MP3” is the abbreviation of Motion Picture Experts  
Group 1 (or MPEG-1) Audio Layer 3. By using MP3  
format, one CD-R or CD-RW can contain about ten  
times as much data as a regular CD can.  
A system for creating realistic three dimensional sound  
fields full of realism by arranging multiple speakers  
around the listener.  
Title  
The longest section of a picture or music feature on  
DVD, music, etc., in video software, or the entire album  
in audio software. Each title is assigned a title number  
enabling you to locate the title you want.  
Parental control  
A function of the DVD to limit playback of the disc by  
the age of the users according to the limitation level in  
each country. The limitation varies from disc to disc;  
when it is activated, playback will be prohibited if the  
software’s level is higher than the user-set level.  
Video output jack  
Jack on the back of the DVD player that sends video to  
a TV.  
PCM (Pulse Code Modulation)  
VR (Video Recording) format  
A system for converting analog sound signals to digital  
signals for later processing, with no data compression  
used in conversion.  
A format which enables you to create a DVD disc that  
can be extensively re-edited.  
Playback control (PBC)  
Refers to the signal recorded on video CDs or SVCDs  
for controlling reproduction. By using menu screens  
recorded on a Video CD or SVCD that supports PBC,  
you can enjoy interactive-type software as well as  
software having a search function.  
Play list  
A list of selected titles to be played back in a specific  
order. This option is only available with VR format and  
must be created beforehand.  
Progressive scan  
It displays all the horizontal lines of a picture at one  
time, as a signal frame. This system can convert the  
interlaced video from DVD into progressive format for  
connection to a progressive display. It dramatically  
increases the vertical resolution.  
47 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Specifications  
PLAYABLE DISC FORMATS  
TV STANDARD  
• DVD-Video  
• Number of lines .............................PAL: 625, NTSC: 525  
• Vertical frequency...................PAL: 50 Hz, NTSC: 60 Hz  
• Playback...............................Multi-standard (PAL/NTSC)  
• DVD-R, DVD-RW, DVD-R DL  
• DVD+R, DVD+RW, DVD+R DL  
• Video CD, SVCD  
• CD  
• PICTURE CD  
CONNECTIONS  
• Video output ..............................RCA/Phono x 1 (yellow)  
• S-video output.................................. Mini DIN, 4 pins x 1  
• Component video output  
• CD-R, CD-RW  
• MP3 (ISO 9660)  
fs 32, 44.1, 48 kHz......................................96-320 kbps  
Y output....................................RCA/Phono x 1 (green)  
PB/CB (PB) output........................RCA/Phono x 1 (blue)  
PR/CR (PR) output..........................RCA/Phono x 1 (red)  
• SCART (Europe and Russia models only)  
............................................................. Euroconnector x 1  
• Audio output (L+R) ....... RCA/Phono x 1 pair (white/red)  
• Digital output  
• WMA  
fs 44.1 kHz..................................................64-192 kbps  
fs 48 kHz...................................................128-192 kbps  
• WMV ..........................720 x 480/720 x 576 pixels or less  
®
• DivX  
• JPEG.........................................3072 x 2048 pixels or less  
Coaxial.................................................. RCA/Phono x 1  
(IEC60958 for CDDA, LPCM /  
VIDEO PERFORMANCE  
IEC61937 for Dolby Digital, DTS)  
HDMI............................................................Type A x 1  
• USB..................................................................Type A x 1  
• Remote Control  
• Video (CVBS) output...........................1 Vpp into 75 ohm  
• S-Video output ................................Y: 1 Vpp into 75 ohm  
C: 0.3 Vpp into 75 ohm  
• Component video output.................Y: 1 Vpp into 75 ohm  
PB/CB (PB), PR/CR (PR): 0.7 Vpp into 75 ohm  
Input........................................... 3.5 mm mini jack x 1  
Output........................................ 3.5 mm mini jack x 1  
• RGB (Scart) output (Europe and Russia models only)  
......................................................Y: 0.7 Vpp into 75 ohm  
CABINET  
AUDIO FORMAT  
• Dimensions (W x D x H)....................435 x 310 x 51 mm  
(17-1/8 x 12-3/16 x 2 in)  
• Weight...................................Approx. 2.6 kg (5 lbs 12 oz)  
• Digital  
Dolby Digital, DTS..........................Compressed digital  
PCM......................... fs 44.1, 48, 96 kHz/16, 20, 24 bits  
• Analog sound ...........................................................Stereo  
POWER SUPPLY  
• Power inlet  
AUDIO PERFORMANCE  
U.S.A. and Canada models.................AC 120 V, 60 Hz  
Europe and Russia models..................AC 230 V, 50 Hz  
Asia, and Central and South America models  
• DA Converter............................................................24 bit  
• Signal-Noise (1 kHz) ............................................. 105 dB  
• Dynamic range (1 kHz)............................................ 97 dB  
• DVD..... fs 96 kHz, 2 Hz-44 kHz/fs 48 kHz, 2 Hz-22 kHz  
• SVCD..........................................fs 48 kHz, 2 Hz-22 kHz/  
fs 44.1 kHz, 2 Hz-20 kHz  
.......................................AC 110-240 V, 50 Hz/60 Hz  
Australia model............................AC 230-240 V, 50 Hz  
Korea model ................................AC 110-240 V, 60 Hz  
• Power consumption.....................................Approx. 16 W  
• Standby power consumption.......................Less than 1 W  
• CD, VCD...................................fs 44.1 kHz, 2 Hz-20 kHz  
• Distortion and Noise (1 kHz).............................. 0.0035%  
LASER  
Type  
Wave length  
Semiconductor laser GaAs/GaAlAs  
650 nm (DVD)  
MULTIMEDIA APPLICATIONS  
780 nm (VCD/CD)  
7 mW (DVD)  
10 mW (VCD/CD)  
• Connections...................... USB mass storage class device  
• Playback formats (USB device)  
Output Power  
MP3............................. fs 32, 44.1, 48 kHz/96-320 kbps  
WMA.......................................... fs 44.1 kHz/64-192 kbps,  
fs 48 kHz/128-192 kbps  
Beam divergence 60 degrees  
WMV .......................720 x 480/720 x 576 pixels or less  
DivX  
JPEG .....................................3072 x 2048 pixels or less  
Specifications are subject to change without prior  
notice.  
®
48 En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3139 245 30221  
©2008 Yamaha Corporation All rights reserved.  
Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Weslo Treadmill WCTL953350 User Manual
Whirlpool Air Conditioner BHAC1400XS0 User Manual
Whirlpool Double Oven GGG390LX User Manual
Windsor Lawn Sweeper RRB 360 User Manual
Winegard TV Antenna 2452292 User Manual
Wolf Food Warmer ICBWWD30 User Manual
Wolfgang Puck Food Processor BFPR0007 User Manual
Woods Equipment Compact Loader 2104045 User Manual
Zanussi Cooktop ZE942 User Manual
Zenoah Chainsaw G300AV User Manual