Yamaha Car Amplifier DSP AX563 User Manual

DSP-AX563

AV Amplifier

OWNER’S MANUAL

Download from Www.Somanuals.com. All Manuals Search And Download.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

Caution: Read this before operating your unit.

To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

Install this sound system in a well ventilated, cool, dry, clean

place – away from direct sunlight, heat sources, vibration,

dust, moisture, and/or cold. Allow ventilation space of at least

30 cm on the top, 20 cm on the left and right, and 20 cm on

the back of this unit.

19 The batteries shall not be exposed to excessive heat such as

sunshine, fire or like.

20 Excessive sound pressure from earphones and headphones can

cause hearing loss.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN

OR MOISTURE.

Locate this unit away from other electrical appliances, motors,

or transformers to avoid humming sounds.

Do not expose this unit to sudden temperature changes from

cold to hot, and do not locate this unit in a environment with

high humidity (i.e. a room with a humidifier) to prevent

condensation inside this unit, which may cause an electrical

shock, fire, damage to this unit, and/or personal injury.

Avoid installing this unit where foreign object may fall onto

this unit and/or this unit may be exposed to liquid dripping or

splashing. On the top of this unit, do not place:

This unit is not disconnected from the AC power

source as long as it is connected to the wall outlet, even

if this unit itself is turned off by ASTANDBY/ON.

This state is called the standby mode. In this state, this

unit is designed to consume a very small quantity of

power.

–

other components, as they may cause damage and/or

discoloration on the surface of this unit.

■ For U.K. customers

If the socket outlets in the home are not suitable for the

plug supplied with this appliance, it should be cut off and

an appropriate 3 pin plug fitted. For details, refer to the

instructions described below.

burning objects (i.e. candles), as they may cause fire,

damage to this unit, and/or personal injury.

containers with liquid in them, as they may fall and liquid

may cause electrical shock to the user and/or damage to

this unit.

Do not cover this unit with a newspaper, tablecloth, curtain,

etc. in order not to obstruct heat radiation. If the temperature

inside this unit rises, it may cause fire, damage to this unit,

and/or personal injury.

Note

The plug severed from the mains lead must be destroyed, as a

plug with bared flexible cord is hazardous if engaged in a live

socket outlet.

Do not plug in this unit to a wall outlet until all connections

are complete.

■ Special Instructions for U.K. Model

Do not operate this unit upside-down. It may overheat,

possibly causing damage.

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:

Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall outlet,

grasp the plug; do not pull the cord.

Blue: NEUTRAL

Brown: LIVE

11 Do not clean this unit with chemical solvents; this might

damage the finish. Use a clean, dry cloth.

As the colours of the wires in the mains lead of this apparatus

may not correspond with the coloured markings identifying

the terminals in your plug, proceed as follows:

The wire which is coloured BLUE must be connected to the

terminal which is marked with the letter N or coloured

BLACK. The wire which is coloured BROWN must be

connected to the terminal which is marked with the letter L or

coloured RED.

12 Only voltage specified on this unit must be used. Using this

unit with a higher voltage than specified is dangerous and may

cause fire, damage to this unit, and/or personal injury. Yamaha

will not be held responsible for any damage resulting from use

of this unit with a voltage other than specified.

13 To prevent damage by lightning, keep the power cord and

outdoor antennas disconnected from a wall outlet or the unit

during a lightning storm.

Making sure that neither core is connected to the earth

terminal of the three pin plug.

14 Do not attempt to modify or fix this unit. Contact qualified

Yamaha service personnel when any service is needed. The

cabinet should never be opened for any reasons.

15 When not planning to use this unit for long periods of time

(i.e. vacation), disconnect the AC power plug from the wall

outlet.

This symbol mark is according to the

EU directive 2002/96/EC.

This symbol mark means that electrical

and electronic equipment, at their end-

of-life, should be disposed of separately

from your household waste.

Please act according to your local rules

and do not dispose of your old products

with your normal household waste.

16 Install this unit near the AC outlet and where the AC power

plug can be reached easily.

17 Be sure to read the “Troubleshooting” section on common

operating errors before concluding that this unit is faulty.

18 Before moving this unit, press ASTANDBY/ON to set this

unit in the standby mode, and disconnect the AC power plug

from the wall outlet.

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Using Bluetooth™ components............................47

Pairing the Bluetooth™ adapter and your

Bluetooth™ component....................................... 47

Playback of the Bluetooth™ componen t ................. 47

Reco rdin g ...............................................................48

INTRODUCTION

Features ................................................................... 2

Getting started ........................................................ 3

Quick start guide .................................................... 4

Preparation: Check the items..................................... 4

Step 1: Set up your speakers...................................... 5

Step 2: Connect your DVD player and

ADVANCED OPERATION

other components .................................................. 6

Step 3: Press SCENE 1 button................................... 7

What do you want to do with this unit?..................... 8

SET MEN U ............................................................49

Using SET MENU................................................... 50

1 SOUND MENU.................................................... 51

2 INPUT MENU...................................................... 57

3 OPTION MENU................................................... 59

Remote control features........................................63

Controlling this unit, a TV, or other components.... 63

Setting remote control codes ................................... 65

Advanced setup......................................................66

PREPARATION

Connection s ............................................................. 9

Rear pane l .................................................................. 9

Placing speakers....................................................... 10

Connecting speakers................................................ 11

Information on jacks and cable plug s ...................... 13

Information on HDMI™.......................................... 14

Audio and video signal flow.................................... 15

Connecting video components................................. 16

Connecting other components ................................. 17

Connecting audio components................................. 19

Connecting a Yamaha iPod™ universal dock

ADDITIONAL INFORMATION

Troubleshooting.....................................................67

Glossary..................................................................76

Specifications .........................................................79

Index.......................................................................80

or Bluetooth™ adapter ........................................ 20

Using REMOTE OUT jack ..................................... 20

Using the VIDEO AUX jacks on the front panel .... 21

Connecting the power cable..................................... 21

Turning on and off the power.................................. 21

Front panel display .................................................. 22

Optimizing the speaker setting

APPENDIX

(at the end of this manual)

Front panel................................................................i

Remote control ....................................................... ii

List of remote control codes ................................. iii

for your listening room .................................... 24

Using AUTO SETUP .............................................. 24

BASIC OPERATION

Selecting the SCENE templates........................... 28

Selecting the desired SCENE template.................... 28

Creating your original SCENE templates................ 31

Using remote control on the SCENE feature........... 32

Playback ................................................................ 33

Basic operations....................................................... 33

Selecting audio input jacks

(AUDIO SELECT).............................................. 34

Selecting the MULTI CH INPUT component......... 34

Displaying the current status of this unit

About this manual

• yindicates a tip for your operation.

• Some operations can be performed by using either the buttons on the

front panel or the ones on the remote control. In case the button

names differ between the front panel and the remote control, the

button name on the remote control is given in parentheses.

• This manual is printed prior to production. Design and specifications

are subject to change in part as a result of improvements, etc. In case

of differences between the manual and product, the product has

priority.

on a video monitor............................................... 35

Using your headphones............................................ 35

Muting the audio output........................................... 35

Playing video sources in the background

• “E SPEAKERS” or “3DVD” (example) indicates the name of the

parts on the front panel or the remote control. Refer to the attached

sheet or the pages at the end of this manual for the information about

each position of the parts.

• The symbol “☞” with page number(s) indicates the corresponding

reference page(s).

of an audio source................................................ 36

Displaying the input source information ................. 36

Using the sleep timer ............................................... 37

Sound field program s ........................................... 38

Sound field program descriptions............................ 38

Using audio feature s ............................................. 41

Enjoying high quality sound.................................... 41

Adjusting the tonal quality....................................... 41

Adjusting the speaker level...................................... 41

Selecting the night listening mode........................... 42

Using a USB memory device or a USB portable

audio player....................................................... 43

Playback operation................................................... 43

Using iPod™.......................................................... 45

Controlling iPod™................................................... 45

1En

Download from Www.Somanuals.com. All Manuals Search And Download.

Features

Built-in 7-channel power amplifier

DOCK terminal

◆ Minimum RMS output power

1 kHz, 0.9% THD, 6 Ω

90 W/ch

◆ DOCK terminal to connect a Yamaha iPod universal dock

(such as YDS-10, sold separately) or Bluetooth adapter (such

as YBA-10, sold separately).

SCENE select function

◆ Preset SCENE templates for various situations

◆ SCENE template customizing capability

USB features

◆ USB port to connect a USB memory device or a USB portable

audio player

Decoders and DSP circuits

◆ MP3, WMA and WAV capability

◆ Proprietary Yamaha technology for the creation of

multi-channel surround sound

Other features

◆ Compressed Music Enhancer mode

◆ Dolby Digital/Dolby Digital EX decoder

◆ DTS/DTS-ES Matrix, Discrete, DTS Neo:6,

DTS 96/24 decoder

◆ Dolby Pro Logic/Dolby Pro Logic II/Dolby Pro Logic IIx

decoder

◆ YPAO (Yamaha Parametric Room Acoustic Optimizer) for

automatic speaker setup

◆ 192-kHz/24-bit D/A converter

◆ DIRECT mode for high quality sound for all sources

◆ 6 additional input jacks for discrete multi-channel input

◆ OSD (on-screen display) menus that allow you to optimize

this unit to suit your individual audiovisual system

◆ Component video input/output capability

(3 COMPONENT VIDEO INs and 1 MONITOR OUT)

◆ S-video signal input/output capability

◆ Virtual CINEMA DSP

◆ SILENT CINEMA^™

HDMI (High-Definition Multimedia Interface)

◆ Optical and coaxial digital audio signal jacks

◆ Sleep timer

◆ Cinema and music night listening modes

◆ iPod controlling capability

◆ HDMI interface for standard, enhanced or high-definition

video (includes 1080p video signal transmission) as well as

multi-channel digital audio

◆ Remote control with preset remote control codes

◆ Bi-amplification connection capability

DTS-ES | NEO:6 | 96/24. Product “DTS” and “DTS-ES | NEO:6”

are registered trademarks of DTS, Inc.

“96/24” is a trademark of DTS, Inc.

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, and the double-D symbol are trademarks

of Dolby Laboratories.

Bluetooth™

Bluetooth is a registered trademark of the Bluetooth SIG and is

used by Yamaha in accordance with a license agreement.

“SILENT CINEMA” is a trademark of Yamaha Corporation.

iPod™

“iPod” is a trademark of Apple, Inc., registered in the U.S. and

other countries.

“HDMI”, the “HDMI” logo and “High-Definition Multimedia

Interface” are trademarks or registered trademarks of HDMI

Licensing LLC.

2 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting started

■ Supplied accessories

Check that you received all of the following parts.

■ Installing batteries in the remote control

❏ Remote control

❏ Batteries (2) (AAA, R03, UM-4)

❏ Optimizer microphone

Take off the battery compartment cover.

Insert the two supplied batteries

(AAA, R03, UM-4) according to the polarity

markings (+ and –) on the inside of the

battery compartment.

Snap the battery compartment cover back

into place.

Notes

• Change all of the batteries if you notice that the operation range

of the remote control decreases.

• Do not use an old battery and a new one together.

• Do not use different types of batteries (such as alkaline and

manganese batteries) together. Read the packaging carefully as

these different types of batteries may have the same shape and

color.

• If the batteries have leaked, dispose of them immediately. Avoid

touching the leaked material or letting it come into contact with

clothing, etc. Clean the battery compartment thoroughly before

installing new batteries.

• Do not throw away batteries with general house waste; dispose

of them correctly in accordance with your local regulations.

• If the remote control is without batteries for more than 2

minutes, or if exhausted batteries remain in the remote control,

the contents of the memory may be cleared. When the memory

is cleared, insert new batteries and set up the remote control

code.

3 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick start guide

The following steps describe the easiest way to enjoy

DVD movie playback in your home theater.

Preparation: Check the items

Prepare the following items.

Front right

speaker

Video monitor

Subwoofer

Front left

speaker

❏ Speakers

Surround right

speaker

❏ Front speaker .....................................x 2

❏ Center speaker ...................................x 1

❏ Surround speaker ..............................x 4

Select magnetically shielded speakers. The

minimum required speakers are two front speakers.

The priority of the requirement of other speakers is

as follows:

Center speaker

Surroundback

right speaker

DVD player

1. Two surround speakers

2. Center speaker

Surround back left

speaker

3. One (or two) surround back speaker(s)

Surround left

speaker

❏ Active subwoofer ...................................x 1

Select an active subwoofer equipped with an RCA

input jack.

❏ Speaker cable .........................................x 7

❏ Subwoofer cable .....................................x 1

Select a monaural RCA cable.

Step 1: Set up your speakers

❏ DVD player ..............................................x 1

Select DVD player equipped with coaxial digital

audio output jack and composite video output

jack.

☞ P . 5

❏ Video monitor..........................................x 1

Select a TV monitor, video monitor or projector

equipped with a composite video input jack.

Step 2: Connect your DVD player

and other components

❏ Video cable .............................................x 2

Select an RCA composite video cable.

❏ Digital coaxial audio cable ....................x 1

☞ P . 6

Step 3: Press SCENE 1 button

☞ P. 7

Enjoy DVD playback!

4 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick start guide

Be sure to connect the left channel (L), right channel

(R), “+” (red) and “–” (black) properly.

Step 1: Set up your speakers

Front and center speakers

Place your speakers in the room and connect them to this

unit.

Loosen

Insert

Tighten

SPEAKERS

COAXIAL

OPTICAL

DVD

DTV/CBL MD/CD-R

MD/CD-R

DIGITAL

OUTPUT

DVD IN1

DTV/CBL IN2

OUT

HDMI

DIGITAL INPUT

COMPONENT VIDEO

DOCK

DVD

DTV/CBL

REMOTE

OUT

DVR

BACK/BI-AMP

BACK

MONITOR OUT

VIDEO

AC OUTLET

SWITCHED

MONITOR

OUT

MONITOR

OUT

DVR

VIDEO

DVD

DTV/CBL

DVR

DVD

DTV/CBL

CENTER

SUB

FRONT(6CH)

SB(8CH)

SUB

SURROUND WOOFER

MD/ OUT

OUT

DVR

(PLAY) CD-R (REC)

DVD

DTV/CBL

TUNER

AUDIO

MULTI CH INPUT

OUTPUT

Place your speakers and subwoofer in the

room.

Connect speaker cables to each speaker.

To the center

speaker

To the front

right speaker

To the front

left speaker

Surround and surround back speakers

Cables are colored or shaped differently, perhaps with

a stripe, groove or ridge. Connect the striped

(grooved, etc.) cable to the “+” (red) terminals of

your speaker. Connect the plain cable to the “–”

(black) terminals.

Connect each speaker cable to the

corresponding speaker terminal of this unit.

To the surround

back right

speaker

To the surround

back left speaker

To the surround To the surround

right speaker left speaker

Connect the subwoofer cable to the input

jack of the subwoofer and the SUBWOOFER

OUTPUT jack of this unit.

1 Make sure that this unit and the subwoofer are

unplugged from the AC wall outlets.

2 Twist the exposed wires of the speaker cables

together to prevent short circuits.

Subwoofer

3 Do not let the bare speaker wires touch each other.

4 Do not let the bare speaker wires touch any metal

part of this unit.

AV amplifier

SUBWOOFER

OUTPUT jack

Input jack

Subwoofer cable

5 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick start guide

Step 2: Connect your DVD player

and other components

Connect the video cable to the video input

jack of your video monitor and the VIDEO

MONITOR OUT jack of this unit.

SPEAKERS

CCOOAAXXIIAALL

AV amplifier

Video monitor

MD/CD-R

DIGITAL

OUTPUT

DVD IN1

DTV/CBL IN2

OUT

HDMI

DOCK

COMPONENT VIDEO

DVD

DTV/CBL

REMOTE

OUT

DVR

SURROUND BACK/BI-AMP

SURROUND

SINGLE

MONITOR OUT

IDID

VIDEO

AC OUTLET

SWITCHED

CENTER

SUB

WOOFER

CENTER

FRONT

FRONT(6CH)

SB(8CH)

MD/ OUT

OUT

DVR

SURROUND WOOFER

(PLAY) CD-R (REC)

TUNER

DVD DTV/CBL

AUDIO

MULTI CH INPUT

OUTPUT

Make sure that this unit and the DVD

player are unplugged from the AC wall

outlets.

Video input

jack

Video cable

VIDEO MONITOR OUT

jack

Connect the power plug of this unit and other

components into the AC wall outlet.

Connect the digital coaxial audio cable to the

digital coaxial audio output jack of your DVD

player and the DVD DIGITAL INPUT COAXIAL

jack of this unit.

This unit is equipped with AC OUTLET(S) for the power supply

of the other components (except Korea model). See page 21 for

details.

DVD player

AV amplifier

■ For further connections

•

Using the other kind of speaker

combinations

☞ P. 11

☞ P. 16

☞ P. 17

☞ P. 18

•

Connecting video components

Connecting a DVD player

Connecting a DVD recorder

Connecting a set-top box

Digital coaxial

audio output jack

Connecting a CD player, a CD recorder

/MD recorder, and a tuner

☞ P. 19

•

Connecting a multi-format player

or an external decoder

☞ P. 19

Digital coaxial audio

cable

Connecting a Yamaha iPod/Bluetooth dock

☞ P. 20

DVD DIGITAL INPUT

COAXIAL jack

Connecting the REMOTE OUT jack

☞ P. 20

Connect the video cable to the composite

video output jack of your DVD player and the

DVD VIDEO jack of this unit.

Using the VIDEO AUX jacks on the front

panel

Using the USB jack on the front panel

☞ P. 43

☞ P. 21

DVD player

AV amplifier

Composite video

output jack

Video cable

DVD VIDEO jack

6 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick start guide

■ About SCENE function

Step 3: Press SCENE 1 button

Just by pressing one SCENE button, you can turn on this

unit and recall your favorite input source and sound field

program according to the SCENE template that has been

assigned to the SCENE button. The SCENE templates are

built combinations of input sources and sound field

programs.

Turn on the video monitor and then set the

input source selector of the video monitor to

this unit.

If you connect a Yamaha product that has capability of the

SCENE control signals, this unit can automatically activate the

component and start playback. Refer to the instruction manual of

the DVD player for further information.

Press SCENE 1.

This unit is turned on. “DVD Viewing” appears in the

front panel display, and this unit automatically

optimize own status for the DVD playback.

■ Using the other SCENE buttons

Default

SCENE

button

The name of the SCENE template

and its description

SCENE

DVD Movie Viewing

– input source: DVD

– sound field program: Movie Dramatic

For when you want to enjoy a movie from the

connected DVD player.

SCENE

Music Disc Listening

– input source: DVD

– sound field program: 2ch Stereo

For when you want to listen to a music disc

from the connected DVD player.

TV Viewing ^*1

– input source: DTV/CBL

SCENE

The indicator on the selected SCENE button lights up while

– sound field program: STRAIGHT

For when you want to watch a TV program.

this unit is in the SCENE mode.

Radio Listening ^*2

– input source: TUNER

– sound field program: 7ch Enhancer

For when you want to listen to a music program

from the FM radio station.

SCENE

Start playback of the desired DVD on your

player.

Rotate

VOLUME to adjust the volume.

Notes

^*1You must connect a cable TV or a satellite tuner to this unit in

advance. See page 16 for details.

^*2You must connect a FM/AM/DAB tuner to this unit in advance.

See page 19 for details.

If you cannot find the desired situation, you can select and change

the assigned SCENE template for the SCENE buttons. See

page 28 for details.

Note

When you change the input source or sound field program, the

SCENE mode is deactivated, and the indicator on the selected

SCENE button turns off.

7 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick start guide

■ After using this unit...

What do you want to do with this

unit?

Press STANDBY/ON on the front panel to set

this unit to the standby mode.

■ Customizing the SCENE templates

•

Using various SCENE templates

☞ P. 28

Creating your original SCENE templates

☞ P. 31

■ Using various input sources

•

Basic controls of this unit

☞ P. 33

Using your USB portable device

with this unit

☞ P. 43

☞ P. 45

•

Using your iPod with this unit

Using your Bluetooth components

with this unit

☞ P. 47

This unit is set to the standby mode. In the standby mode,

this unit consumes a small amount of power in order to

receive infrared signals from the remote control. To turn

on this unit from the standby mode, press

■ Using various sound features

•

Using various sound field programs

STANDBY/ON (or GPOWER). See page 21 for

☞ P. 38

details.

Using the direct mode for the high

quality sound

☞ P. 41

Customizing the sound field programs

☞ P. 40

■ Adjusting the parameters of this unit

•

Automatically optimizing the speaker

parameters for your listening room (AUTO

SETUP)

☞ P. 24

•

Manually adjusting various parameters of

this unit

☞ P. 49

☞ P. 63

•

Setting the remote control

Adjusting the advanced parameters☞ P. 66

■ Additional features

Automatically turning off this unit

☞ P. 37

8 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

Rear panel

SPEAKERS

COAXIAL

OPTICAL

DVD

DTV/CBL MD/CD-R MD/CD-R

DIGITAL

OUTPUT

DVD IN1

DTV/CBL IN2

OUT

HDMI

DIGITAL INPUT

DOCK

COMPONENT VIDEO

DVD

DTV/CBL

REMOTE

OUT

DVR

SURROUND BACK/BI-AMP

SURROUND

SINGLE

MONITOR OUT

VIDEO

AC OUTLET

SWITCHED

MONITOR

OUT

MONITOR

OUT

VIDEO

DVD

DTV/CBL

DVR

DVD

DTV/CBL

DVR

CENTER

SUB

WOOFER

CENTER

FRONT

FRONT(6CH)

SB(8CH)

MD/ OUT

OUT

DVR

SURROUND WOOFER

(PLAY) CD-R (REC)

DVD

DTV/CBL

TUNER

AUDIO

MULTI CH INPUT

OUTPUT

0 A

Name

Page

HDMI jacks

DIGITAL INPUT jacks

DIGITAL OUTPUT jack

COMPONENT VIDEO jacks

DOCK terminal

Speaker terminals

REMOTE OUT jack

AUDIO jacks

MULTI CH INPUT jacks

VIDEO jacks

SUBWOOFER OUTPUT jack

AC OUTLET(S)

9 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

Placing speakers

The speaker layout below shows the speaker setting we recommend. You can use it to enjoy CINEMA DSP and

multi-channel audio sources.

30˚

60˚

SBR

80˚

SBL

SBR

30 cm (12 in) or more

Front left and right speakers (FL and FR)

The front speakers are used for the main source sound plus effect sounds. Place these speakers at an equal distance from the

ideal listening position. The distance of each speaker from each side of the video monitor should be the same.

Center speaker (C)

The center speaker is for the center channel sounds (dialog, vocals, etc.). If for some reason it is not practical to use a

center speaker, you can do without it. Best results, however, are obtained with the full system.

Surround left and right speakers (SL and SR)

The surround speakers are used for effect and surround sounds.

Surround back left and right speakers (SBL and SBR)

The surround back speakers supplement the surround speakers and provide more realistic front-to-back transitions.

Subwoofer (SW)

The use of a subwoofer with a built-in amplifier, such as the Yamaha Active Servo Processing Subwoofer System, is

effective not only for reinforcing bass frequencies from any or all channels, but also for high fidelity sound reproduction

of the LFE (low-frequency effect) channel included in Dolby Digital and DTS sources. The position of the subwoofer is

not so critical, because low bass sounds are not highly directional. But it is better to place the subwoofer near the front

speakers. Turn it slightly toward the center of the room to reduce wall reflections.

10 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

Connecting speakers

Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty,

this unit cannot reproduce the input sources accurately.

Caution

•

Before connecting the speakers, make sure that the AC power plug is disconnected from the AC wall outlet.

Do not let the bare speaker wires touch each other or let them touch any metal part of this unit. This could damage

this unit and/or the speakers. If the speaker wires are short-circuited, “CHECK SP WIRES” appears in the front

panel display when you turn on this unit.

•

Use the magnetically shielded speakers. If this type of speaker still creates interference with the monitor, place the

speakers away from the monitor.

When you use single surround

back speaker, connect the

speaker to the left SURROUND

BACK terminal (SINGLE).

Surround back speakers

Surround speakers

Right

Left

Right

Left

SPEAKERS

COAXIAL

OPTICAL

DVD

DTV/CBL MD/CD-R

MD/CD-R

DIGITAL

OUTPUT

DVD IN1

DTV/CBL IN2

OUT

HDMI

DIGITAL INPUT

COMPONENT VIDEO

DOCK

DVD

DTV/CBL

REMOTE

OUT

DVR

SURROUND BACK/BI-AMP

SURROUND

SINGLE

MONITOR OUT

VIDEO

AC OUTLET

SWITCHED

MONITOR

OUT

MONITOR

OUT

VIDEO

DVD

DTV/CBL

DVR

DVD

DTV/CBL

DVR

CENTER

SUB

WOOFER

CENTER

FRONT

FRONT(6CH)

SB(8CH)

MD/ OUT

OUT

DVR

SURROUND WOOFER

(PLAY) CD-R (REC)

DVD

DTV/CBL

TUNER

AUDIO

MULTI CH INPUT

OUTPUT

FRONT B terminals

Connect the alternative front speaker system

(FRONT B).

Center

speaker

Subwoofer

Right

Left

Front speakers

(FRONT A)

11 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

■ Before connecting to the SPEAKERS

terminal

■ Using bi-amplification connections

Caution

A speaker cord is actually a pair of insulated cables

running side by side. Cables are colored or shaped

differently, perhaps with a stripe, groove or ridges.

Connect the striped (grooved, etc.) cable to the “+” (red)

terminals of this unit and your speaker. Connect the plain

cable to the “–” (black) terminals.

Remove the shorting bars or bridges to separate the

LPF (low pass filter) and HPF (high pass filter)

crossovers.

This unit allows you to make bi-amplification connections

to one speaker system. Check if your speak ers support

bi-amplification.

To make the bi-amplification connections, use the FRONT

and SURROUND BACK terminals as shown below. To

activate the bi-amplification connections, set “BI-AMP”

to “ON” in “Advanced setup” (see page 66).

Remove approximately 10 mm (3/8”) of insulation

from the end of each speaker cable and then

twist the bare wires of the cable together to

prevent short circuits.

10 mm (3/8”)

Front speakers

Left

Right

■ Connecting to the FRONT A terminals

Red: positive (+)

Black: negative (–)

SURROUND BACK/BI-AMP

FRONT

SINGLE

Loosen the knob.

This unit

Insert the bare end of the speaker wire into

the hole on the terminal.

Note

Tighten the knob to secure the wire.

• When you make the conventional connection, make sure that

the shorting bars are put into the terminals appropriately. Refer

to the instruction manuals of the speakers for details.

• When you use bi-amplification connections, you can not use

surround back speakers.

12 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

Information on jacks and cable plugs

Connect one of the type of the audio jack(s) and/or video jack(s) that your input components are equipped with.

Audio jacks and cable plugs Video jacks and cable plugs

COMPONENT VIDEO

DIGITAL AUDIO

COAXIAL

DIGITAL AUDIO

OPTICAL

AUDIO

VIDEO

S VIDEO

(White)

(Red)

(Orange)

(Yellow)

(Red)

(Blue)

(Green)

Left and right

analog audio

cable plugs

Coaxial

digital audio

cable plug

Optical

digital

audio cable

plug

Composite

video cable

plug

S-video

cable plug

Component

video cable

plugs

■ Audio jacks

■ Video jacks

This unit has three types of audio jacks. Connection

depends on the availability of audio jacks on your other

components.

This unit has three types of video jacks. Connection

depends on the availability of input jacks on your video

monitor.

AUDIO jacks

VIDEO jacks

For conventional analog audio signals transmitted via left

and right analog audio cables. Connect red plugs to the

right jacks and white plugs to the left jacks.

For conventional composite video signals transmitted via

composite video cables.

S VIDEO jacks

DIGITAL AUDIO COAXIAL jacks

For digital audio signals transmitted via coaxial digital

audio cables.

For S-video signals, separated into the luminance (Y) and

chrominance (C) video signals transmitted on separate

wires of S-video cables.

DIGITAL AUDIO OPTICAL jacks

For digital audio signals transmitted via optical digital

audio cables.

COMPONENT VIDEO jacks

For component signals, separated into the luminance (Y)

and chrominance (P^B, PR) video signals transmitted on

separate wires of component video cables.

Notes

Video signal flow for MONITOR OUT

Output

• You can use the digital jacks to input PCM, Dolby Digital and

DTS bitstreams. Optical input jacks are compatible with digital

signals with up to 96 kHz of sampling frequency.

• This unit handles digital and analog signals independently. Thus

audio signals input at the digital jacks are not output at the

analog AUDIO OUT (REC) jacks.

Input

(MONITOR OUT)

PR PB

COMPONENT

VIDEO

S VIDEO

VIDEO

Through

Video conversion ON

(see page 59)

Note

The OSD signal is not output at the DVR OUT (REC) jacks.

13 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

Information on HDMI™

■ HDMI compatibility with this unit

■ HDMI jack and cable plug

Compatible

HDMI

components

HDMI

Audio signal

types

Audio signal

formats

2ch Linear PCM

2ch, 32-192 kHz,

16/20/24 bit

CD, DVD-Video,

DVD-Audio, etc.

Multi-ch Linear

PCM

8ch, 32-192 kHz,

16/20/24 bit

DVD-Audio, etc.

Bitstream

Dolby Digital, DTS DVD-Video, etc.

HDMI cable plug

This unit’s HDMI interface is based on the following

standards:

• We recommend using an HDMI cable shorter than 5 meters (16

feet) with the HDMI logo printed on it.

• Use a conversion cable (HDMI jack ↔ DVI-D jack) to connect

this unit to other DVI components.

•

HDMI Version 1.2a (High-Definition Multimedia

Interface Specification Version 1.2a) licensed by

HDMI Licensing, LLC.

•

HDCP (High-bandwidth Digital Content Protection

System) licensed by Digital Content Protection,

LLC.

Notes

• Do not disconnect or connect the cable or turn off the power of

the HDMI components connected to the HDMI OUT jack of

this unit while data is being transferred. Doing so may disrupt

playback or cause noise.

• Audio signals input at input jacks other than the HDMI IN DVD

or HDMI IN DTV/CBL jack of this unit cannot be digitally

output at the HDMI OUT jack.

• If you turn off the power of the video monitor connected to the

HDMI OUT jack via a DVI connection, this unit may fail to

establish the connection to the component.

Notes

• When CPPM copy-protected DVD audio is played back, video

and audio signals may not be output depending on the type of

the DVD player.

• This unit is not compatible with HDCP-incompatible HDMI or

DVI components.

• You can check the potential problem about the HDMI

connection (see page 36).

14 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

Audio and video signal flow

■ Audio signal flow

■ Video signal flow

Input

Output

Input

Output

HDMI

DIGITAL AUDIO

(COAXIAL)

DIGITAL AUDIO

(OPTICAL)

COMPONENT

VIDEO

AUDIO

S VIDEO

VIDEO

Digital output

Analog output

Through

Video conversion ON (see page 59)

Notes

• 2-channel as well as multi-channel PCM, Dolby Digital and

DTS signals input at the HDMI IN DVD or HDMI IN

DTV/CBL jack can be output at the HDMI OUT jack only

when “SUPPORT AUDIO” is set to “Other” (see page 56).

• Audio signals input at the HDMI IN jacks are not output at the

AUDIO output and DIGITAL OUTPUT jacks.

• When the all video signals are input at the HDMI,

COMPONENT VIDEO, S VIDEO and VIDEO jacks, the

priority order of the input signals is as follows:

1. HDMI

2. COMPONENT VIDEO

3. S VIDEO

4. VIDEO

• When some digital video signals are input at the HDMI IN

DVD or HDMI IN DTV/CBL jack, the video conversion

function does not work.

• Digital video signals input at the HDMI IN DVD or HDMI IN

DTV/CBL jack cannot be output from analog video output

jacks.

15 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

Connecting video components

Connect your TV (or projector) to the HDMI OUT jack,

the COMPONENT VIDEO MONITOR OUT jacks, the S

VIDEO MONITOR OUT jack or the VIDEO MONITOR

OUT jack of this unit.

Notes

• Some video monitors connected to this unit via a DVI

connection fail to recognize the HDMI audio/video signals

being input if they are in the standby mode. In this case, the

HDMI indicator flashes irregularly.

• When you connect your TV monitor or projector via HDMI

connection, the OSD does not appear. In such cases, connect the

TV monitor or projector via component, S-video or video

connection.

Make sure that this unit and other

components are unplugged from the

AC wall outlets.

• Connect the input source components to the HDMI IN DVD or

HDMI IN DTV/CBL jack to display the video images on the

video monitor connected to the HDMI OUT jack.

You can choose to play back HDMI audio signals on this unit or

on another HDMI component connected to the HDMI OUT jack

of this unit. Use the “SUPPORT AUDIO” parameter in “SOUND

MENU” to select the component to play back HDMI audio

signals (see page 56).

COAXIAL

OPTICAL

MD/CD-R

DIGITAL

OUTPUT

DVD

DTV/CBL MD/CD-R

DTV/CBL IN2

OUT

HDMI

DIGITAL INPUT

COMPONENT VIDEO

DVD

DTV/CBL

DVR

MONITOR OUT

VIDEO

MONITOR

OUT

MONITOR

OUT

DVR

S VIDEO

DVD

DTV/CBL

DVR

DVD

DTV/CBL

CENTER

FRONT(6CH)

SB(8CH)

SUB

SURROUND WOOFER

OUT

REC)

OUT

DVD

DTV/CBL

DVR

TUNER

AUDIO

MULTI CH INPUT

OUTPU

Component

video in

HDMI in

Video in

S-video in

TV (or projector)

indicates recommended connections

indicates alternative connections

(One for the video connection,

and one for the audio connection)

16 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

Connecting other components

• When “VIDEO CONV.” is set to “ON” (see page 59), the

converted video signals are output only at the MONITOR OUT

jacks. To record a source, make the same type of video

connections between each component.

• To make a digital connection to a component other than the

default component assigned to DIGITAL INPUT jack, select

the corresponding setting for “OPTICAL IN” or “COAXIAL

IN” in “I/O ASSIGNMENT” (see page 57).

Make sure that this unit and other

components are unplugged from the

AC wall outlets.

• If you connect your DVD player to both the DIGITAL INPUT

(OPTICAL) and the DIGITAL INPUT (COAXIAL) jacks,

priority is given to the signals input at the DIGITAL INPUT

(COAXIAL) jack.

Notes

• When “VIDEO CONV.” is set to “OFF” (see page 59), be sure

to make the same type of video connections as those made for

your TV (see page 16). For example, if you connected your TV

to the VIDEO MONITOR OUT jack of this unit, connect your

Category

Program

Features

CINEMA DSP processing. This program presents an image of pop, rock, or jazz live

concert. The sound field reproduces the spaciousness of a massive pavilion with an emphasis

on the vividness of vocals on the stage and solo instruments and the beats of rhythm

instruments.

Pop/Rock

MUSIC

CINEMA DSP processing. This sound field is suitable for classic and orchestral music. The

program uses data collected in a large concert hall in Munich. You can enjoy delicate and

beautiful reverberation and a majestic atmosphere.

Hall

CINEMA DSP processing. The sound field is suitable for jazz and fusion music. It uses data

collected in a famous jazz club in New York. You can enjoy clear reverberation.

Jazz

Game

CINEMA DSP processing. You can enjoy dynamic and thrilling sound effects as you play

games. The program lets you feel the depth and three-dimensional surrounding sounds of the

field where you are playing, and offers cinema-like surrounding sound effects for the scenes

of movies.

ENTERTAINMENT

CINEMA DSP processing. You can enjoy sports relays broadcast in stereo and variety shows

with a live sound environment. For sports relays, the voices of commentators and

announcers come clearly from the center; the cheers and atmosphere in the stadium spread

around within a comfortable range, and you can feel like as if you are in the stadium.

TV Sports

CINEMA DSP processing. The sound field is suitable for movies with an emphasis on

spectacular sound effects, and is a perfect fit with a wide screen. The program reproduces a

wide dynamic range from minimum sound effects to powerful sounds.

Movie Spacious

Movie Dramatic

MOVIE

CINEMA DSP processing. This sound field is also suitable for movies with an emphasis on

three-dimensional sound effects. It restrains reverberation to an moderate extent, but

reproduces sound effects and background music in a soft, three-dimensional manner with

clarity and center orientation of voices as pivots.

Downmixes multi-channel sources to 2 channel or plays back 2-channel sources as they are.

2ch Stereo

7ch Stereo

STEREO

CINEMA DSP processing. Using this program increases the listening position range. This is

a sound field suitable for background music at parties.

Select these programs to play back compression artifacts (such as the MP3 format) in

2-channel or 7-channel stereo. This program enhances your listening experience by

regenerating the missing harmonics in a compression artifact.

2ch Enhancer

7ch Enhancer

MUSIC

ENHANCER

Note

The sound field programs of this unit are recreations of real-world acoustic environments made from precise measurements taken in the

actual concert hall, music venue, movie theater, etc. Thus, you may notice variations in the strength of the reflections coming from each

direction.

38 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Sound field programs

■ Enjoying 2-channel sources using the

standard decoders

Signals input from 2-channel sources can also be played

back on multi-channels.

■ Using sound field programs without

surround speakers (Virtual CINEMA

DSP)

Virtual CINEMA DSP allows you to enjoy the CINEMA

DSP programs without surround speakers by creating

virtual speakers.

If you set “SUR. L/R SP” to “NONE” (see page 52),

Virtual CINEMA DSP is automatically activated

whenever you select a CINEMA DSP program (see

page 38).

Press AMP and then press

OSUR. DECODE

repeatedly to select a decoder.

You can select from the following decoders depending on

the type of source you are playing and your personal

preference.

Note

Decoder

Functions

Virtual CINEMA DSP will not be activated even when “SUR.

L/R SP” is set to “NONE” (see page 52) in the following cases:

– when “7ch Stereo” (see page 38) is selected.

Dolby Pro Logic processing for any

sources

Pro Logic

– when headphones are connected to the PHONES jack.

Dolby Pro Logic II processing for

movie sources

PLII Movie

PLIIx Movie

■ Enjoying multi-channel sources and

sound field programs with headphones

(SILENT CINEMA)

Dolby Pro Logic II processing for

music sources

PLII Music

PLIIx Music

SILENT CINEMA allows you to enjoy multi-channel

music or movie sound, including Dolby Digital and DTS

sources, through ordinary headphones. SILENT CINEMA

is automatically activated whenever you connect

headphones to the PHONES jack while listening to

CINEMA DSP sound field programs (except for 7ch) (see

page 38). When activated, the SILENT CINEMA

indicator lights up in the front panel display.

Dolby Pro Logic II processing for

game sources

PLII Game

PLIIx Game

DTS processing for movie sources

DTS processing for music sources

Neo:6 Cinema

Neo:6 Music

■ Enjoying unprocessed input sources

(Straight decoding mode)

When this unit is in the “STRAIGHT” mode,

multi-channel sources are decoded straight into the

appropriate channels without any additional effect

processing. 2-channel stereo sources are output from only

the front left and right speakers.

Press STRAIGHT (or press AMP and then

press STRAIGHT) to select “STRAIGHT”.

To deactivate the “STRAIGHT” mode, press

STRAIGHT (or press AMP and then

STRAIGHT) again so that “STRAIGHT” disappears

from the front panel display.

39 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Sound field programs

■ Editing sound fields parameters

Initial settings are indicated in bold under each parameter.

You can enjoy good quality sound with the factory default

parameters. Although you do not have to change the initial

settings, you can change some of the parameters to better

suit the input source or your listening room.

For Pop/Rock, Hall, Jazz, Game, TV Sports,

Movie Spacious and Movie Dramatic:

DSP level DSP LEVEL

Function:

Choices:

Adjusts the effect level.

MIN, MID, MAX

While listening to a source, press AMP

and then press PARAMETER.

For 2ch Enhancer and 7ch Enhancer

Press 7k/ nto select the desired parameter

you want to change.

Effect level EFFECT LEVEL

Function:

Choices:

Adjusts the effect level.

LOW, HIGH

Press 7l/ hto change the parameter

value.

For Pro Logic II Music and Pro Logic IIx Music:

Panorama PANORAMA

Note

Function:

Sends stereo signals to the surround

speakers as well as the front speakers for

a wraparound effect.

You cannot change parameter values when “MEMORY GUARD”

in “OPTION MENU” is set to “ON” (see page 60).

Choices:

OFF, ON

Dimension DIMENSION

Function: Gradually adjusts the sound field either

towards the front or towards the rear.

Control range: –3 (towards the rear) to +3 (towards the

front), initial setting is STD (standard).

Center width CT WIDTH

Function:

Adjusts the center image from all three

front speakers to varying degrees. A

larger value adjusts the center image

towards the front left and right speakers.

Control range: 0 (center channel sound is output only

from center speaker) to 7 (center channel

sound is output only from front left and

right speakers), initial setting is 3.

For Neo:6 Music

Center image C.IMAGE

Function:

Adjusts the front left and right channel

output relative to the center channel

more or less dominant as necessary.

Control range: 0.0 to 1.0, initial setting is 0.3.

40 En

Download from Www.Somanuals.com. All Manuals Search And Download.

USING AUDIO FEATURES

Using audio features

Enjoying high quality sound

Adjusting the speaker level

Use the DIRECT mode to enjoy the high quality sounds of

the selected source. When the DIRECT mode is activated,

this unit plays back the selected source with the least

circuitry.

You can adjust the output level of each speaker while

listening to a music source. This is also possible when

playing sources input at the MULTI CH INPUT jacks.

Note

IDIRECT

DIRECT) to select “DIRECT”.

(or press AMP and then

Press

This operation will override the level adjustments made in

“AUTO SETUP” (see page 24) and “SP LEVEL” (see page 53).

Notes

Press AMP and then press LEVEL on

the remote control and then k/ nto select

the speaker you want to adjust.

• “TONE CONTROL” and “SOUND MENU” (see page 51)

settings (except for speaker level settings) are not effective.

• The front panel display automatically dims.

Display

FRONT L

FRONT R

CENTER

SWFR

Adjusted speaker

Front left speaker

While DIRECT mode is activated, the front panel display turns on

momentarily when an operation is performed.

Front right speaker

Center speaker

Adjusting the tonal quality

Use this feature to adjust the balance of bass and treble for

the front left and right speaker channels.

Subwoofer

Surround left speaker

Surround right speaker

Surround back left speaker

Surround back right speaker

SUR. L

SUR. R

SB L

Speaker and headphone adjustments are stored independently.

Press TONE CONTROL repeatedly to

select the high-frequency response

(TREBLE) or the low-frequency response

(BASS).

SB R

• Instead of “SB L” and “SB R”, “SUR.B” is displayed if

“SUR.B L/R SP” is set to either “SMLx1” or “LRGx1”

(see page 52).

• The available speaker channels differ depending on the

setting of the speakers.

Press PROGRAM l/ hrepeatedly to

adjust the high-frequency response

(TREBLE) or the low-frequency response

(BASS).

• When the video monitor is turned on, the “SP LEVEL”

adjustment menu appears in the video monitor.

Notes

Press l/ hto adjust the speaker output

level.

• If you increase or decrease the high-frequency or the

low-frequency sound to an extreme level, the tonal quality of

the surround speakers may not match.

• TONE CONTROL is not effective when this unit is in the

DIRECT mode, or when MULTI CH is selected as the input

source.

• Press hto increase the value.

• Press lto decrease the value.

• Control range: –10 dB to +10 dB

Press LEVEL to turn off the speaker level

adjustment display.

41 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Using audio features

Selecting the night listening mode

The night listening modes are designed to improve

listenability at lower volumes or at night.

Press AMP and then NIGHT repeatedly

to select “NIGHT:CINEMA” or

“NIGHT:MUSIC”.

Choices: NIGHT:CINEMA, NIGHT:MUSIC, OFF

• Select “NIGHT:CINEMA” when watching films to

reduce the dynamic range of film soundtracks and

make dialog easier to hear at lower volumes.

• Select “NIGHT:MUSIC” when listening to music

sources to preserve ease-of-listening for all sounds.

• Select “OFF” if you do not want to use this feature.

When a night listening mode is selected, the NIGHT

indicator lights up in the front panel display.

Press l/ hto adjust the effect level while

“NIGHT:CINEMA” or “NIGHT:MUSIC” is

displayed in the front panel display.

Effect.Lvl:MID

Choices: MIN, MID, MAX

• Select “MIN” for minimum compression.

• Select “MID” for standard compression.

• Select “MAX” for maximum compression.

“NIGHT:CINEMA” and “NIGHT:MUSIC” adjustments are

stored independently.

Notes

• You cannot use the night listening modes in the following cases:

– when the DIRECT mode (see page 41) is selected.

– when the component connected to the MULTI CH INPUT

jacks is selected as the input source (see page 34).

– when headphones are connected to the PHONES jack.

• The night listening modes may vary in effectiveness depending

on the input source and surround sound settings you use.

42 En

Download from Www.Somanuals.com. All Manuals Search And Download.

USING A USB MEMORY DEVICE OR A USB PORTABLE AUDIO PLAYER

Using a USB memory device or a USB portable audio player

Use this feature to enjoy WAV (PCM format only), MP3 and WMA files saved on your USB memory device or USB

portable audio player connected to the USB port on the front panel of this unit.

■ Supported USB devices

Playback operation

Follow the procedures below to enjoy the music stored in

This unit supports USB mass storage class devices (except

USB hard disk drives) using FAT16 or FAT32 format.

your USB device or a USB portable audio player.

Notes

• Only the first partition (32 GB or less) is displayed in the OSD.

Press INPUT l/ hrepeatedly (or press

You cannot select files in other partitions.

• Up to 8 levels of directory hierarchy and 500 music files per

directory are recognized.

• Some devices may not work properly even if they meet the

requirements.

USB) to select USB.

The cursor on the left of the USB indicator lights up

in the front panel display, and the contents previously

played is automatically played.

• Some WAV, MP3 and WMA files may not be playable or may

be noisy when played.

Lights up

■ Connecting a USB memory device or a

MULTI CH

DVR

V-AUX

DTV/CBL

DVD

MD/CD-R CD

TUNER

USB

USB potable audio player

INPUT:ꢀꢀUSB

Connect a USB jack of a USB memory device or

USB portable audio player to the USB port on the

front panel of this unit.

Press DISPLAY to display the top USB file

list.

The USB file list appears in the OSD.

VOLUME

STANDBY/

OPTIMIZER MIC

USB

Root

SCENE

Ellis Margellis

Frankie Zipper

Hall in Call

Jackie Pastarius

Jmiel

Jean-Luc Ponta

Jim Hallo

VIDEO AUX

AUDIO

USB

PROGRAM

INPUT

VIDEO

PHONES

SPEAKERS

A/B/OFF

TONE CONTROL

STRAIGHT

DIRECT

AUDIO SELECT

SILENT CINEMA

EFFECT

USB

1/7

• “i” in the right corner of each menu line indicates that

there is a submenu available in the next menu level.

• When this unit is in the top directory, “Root” appears

beside “USB”.

USB memory device

or USB portable

audio player

43 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Using a USB memory device or a USB portable audio player

■ The function of the play information

Press k/ n / l/ hon the remote control

to select the desired file.

display

[5]

[6]

[7]

• Press k/ nto select the desired file/folder.

USB

[Play]

All

• Press ENTER or hto enter the selected

[1]

[2]

[3]

FrankieꢀZipper

folder.

. Made-to-orderaaaaaAA

;RoadꢀtoꢀIndiaaaAAAA

• Press lto return to the previous folder level.

[4]

00:00

Press ENTER to play the selected file.

[1] Name of the artist

[2] Name of the album

[3] Name of the song

[4] Elapsed time

Note

• You can use b/ ato skip backward/forward and

h/ sto start/stop playback independently from the menu

in the OSD.

• You can set the settings for repeat and shuffle mode by using the

“USB PLAY STYLE” parameters in “OPTION MENU” (see

page 62).

• You can select the display mode in the front panel display by

using “FL SCROLL” in “OPTION MENU” (see page 60).

When the elapsed time exceed “99:59”, “--:--” appeared

instead of the time.

[5] (playback) icon

[6]

(all repeat),

(single repeat) icons

All

When “REPEAT” of the “USB PL A Y S TYLE” in “OPTION

MENU” (see page 62) is set to “OFF”, no icon appears in the

top right corner while files or folders are being played.

[7]

(shuffle) icon

When “SHUFFLE” of the “USB PLAY STYLE” in

“OPTION MENU” (see page 62) is set to “OFF”, no icon

appears in the top right corner while files or holders are being

played.

44 En

Download from Www.Somanuals.com. All Manuals Search And Download.

USING IPOD™

Using iPod™

Once you have stationed your iPod in a Yamaha iPod universal dock (such as YDS-10, sold separately) connected to the

DOCK terminal of this unit (see page 20), you can enjoy playback of your iPod using the supplied remote control. You

can also use the Compressed Music Enhancer mode of this unit to improve the sound quality of the compression artifacts

(such as the MP3 format) stored on your iPod (see page 20).

Notes

• Only iPod (Click and Wheel), iPod nano, and iPod mini are supported.

• Some features may not be compatible depending on the model or the software version of your iPod.

• For a complete list of status messages that appear in the front panel display and in the OSD, see the “iPod” section in

“Troubleshooting” on page 73.

• Once your iPod is stationed in a Yamaha iPod universal dock, this unit begins signal transmission with your iPod.

• Once the connection between your iPod and this unit is complete, “iPod connected” appears in the front panel display and the DOCK

indicator lights up in the front panel display.

• Only the analog audio and video signals of your iPod are input at the DOCK terminal, and the analog audio signals can be output at the

analog AUDIO OUT (REC) jacks for recording.

Controlling iPod™

You can control your iPod when “V-AUX” is selected as the input source. The operations of your iPod can be done with

the aid of the OSD of this unit (menu browse mode) or without it (simple remote mode).

■ Remote control operation

■ Controlling iPod in the simple remote

mode

You can perform the basic operations of your iPod (play,

stop, skip, etc.) using the supplied remote control without

the aid of the OSD of this unit.

Before performing the following operations, press

V-AUX/DOCK.

Button

Function

ENTER

Subsequent menu

Menu up

• You can view the photos or video clips stored on your iPod

(some models only).

• Operations can be also done with the controls on your iPod.

Menu down

Previous menu

Subsequent menu

9 ll

Search backward (Press and hold)

Search forward (Press and hold)

Skip backward

Skip forward

Stop

Pause (Menu browse mode)

Play/Pause (Simple remote mode)

Play (Menu browse mode)

Play/Pause (Simple remote mode)

DISPLAY

Previous menu

Display

45 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Using iPod™

Shuffle Shuffle

Use this feature to set this unit to play songs or albums in

random order.

■ Controlling iPod in the menu browse

mode

You can perform the advanced operations of your iPod

using the supplied remote control when you connect this

unit and a monitor using the S VIDEO or VIDEO

connection. You can browse the songs stored on your iPod

in the OSD. Further, you can change or adjust settings for

your iPod to suit your personal preferences.

Choices: Off, Songs, Albums

•

Select “Off”to deactivate this feature.

Select “Songs” to set this unit to play songs in random

order.

•

Select “Albums” to set this unit to play albums in

random order.

• The name of the song being played also appears in the front

panel display according to the “FL SCROLL” parameter in

“OPTION MENU” (see page 60).

When “Shuffle” is set to a setting other than “Off ”, “

in the top right corner while songs or albums are being shuffled.

” appears

• You can select the amount of time the iPod menu and play

information is displayed in the OSD by using the

“OSD-SOURCE” in “OPTION MENU” (see page 60)

Repeat Repeat

Use this feature to set this unit to repeat one song or a

sequence of songs.

Choices: Off, One, All

Notes

•

Select “Off”to deactivate this feature.

Select “One” to set this unit to repeat one song.

Select “All” to set this unit to repeat a sequence of

songs.

• Operations cannot be done with the controls on your iPod.

• The Yamaha logo appears in the display window of your iPod.

• There are some characters that cannot be displayed in the front

panel display or in the OSD of this unit. Those characters are

replaced with underscores “_”.

• The “Settings” parameters can be changed or adjusted only in

When “Repeat” is set to a setting other than “Off ”, “ ” or “

”

All

the OSD. Press ENTER repeatedly to toggle between the

appears in the top right corner while one song or a sequence of

songs are being repeated.

“Settings” parameter settings.

• You cannot browse the photos or video clips stored on your

iPod in the OSD. Use the simple remote mode to enjoy

watching the photos or video clips stored on your iPod.

■ The function of the play information

display

Press V-AUX/DOCK and then

[1]

[7]

[8]

DISPLAY.

iPodꢀꢀꢀꢀꢀ[Play]ꢀꢀꢀꢀ

All

The following display appears in the OSD.

[2]

[3]

[4]

ꢀ1ꢀ/ꢀ9ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ

ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ

ꢀꢀꢀꢀꢀꢀFrankieꢀZipperꢀꢀꢀꢀ

ꢀꢀꢀꢀꢀꢀMade-to-orderꢀꢀꢀꢀꢀ

ꢀꢀꢀꢀꢀꢀRoadꢀtoꢀIndiaꢀꢀꢀꢀꢀ

ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ

ꢀꢀ||;;;;;;;;;;;;;;;;;;ꢀꢀ

ꢀꢀ0:51ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ-7:44ꢀꢀ

iPod

Top

[9]

Playlists

Artists

Albums

Songs

Genres

[5]

[6]

Composers

Settings

[10]

[1] Playback status

[2] Track number/total tracks

[3] Artist name

Press k/ n / l/ hto navigate the iPod

menu and then press ENTER to begin

playback of the selected song.

Choices: Playlists (playlists), Artists (artists), Albums

(albums), Songs (songs), Genres (genres),

Composers (composers), Settings (settings)

• Playlists > Songs

[4] Song title

[5] Progress bar

• Artists > Albums > Songs

• Albums > Songs

• Songs

[6] Elapsed time

[7] Shuffle and repeat icons

• Genres > Artists > Albums > Songs

• Composers > Albums > Songs

• Settings > Shuffle, Repeat

[8]

(playback),

(pausing),

(search

forward) and

(search backward)

[9] Name of the album

[10] Remaining time

46 En

Download from Www.Somanuals.com. All Manuals Search And Download.

USING BLUETOOTH™ COMPONENTS

Using Bluetooth™ components

You can connect a Yamaha Bluetooth adapter (such as YBA-10, sold separately) to the DOCK terminal of this unit and

enjoy the music contents stored in your Bluetooth component (such as a portable music player) without wiring between

this unit and the Bluetooth component. You need to perform “pairing” the connected Bluetooth adapter and your

Bluetooth component in advance.

Note

Pairing the Bluetooth™ adapter

and your Bluetooth™ component

If the Bluetooth adapter is not connected to the DOCK

terminal of this unit, “No BT adapter” appears in the front

panel display.

Pairing must be performed when using a Bluetooth

component with the Bluetooth adapter connected to this

unit for the first time or if the pairing data has been

deleted. “Pairing” refers to the operation of registering a

Bluetooth component for Bluetooth communications.

Check that the Bluetooth component detects

the Bluetooth adapter.

If the Bluetooth component detects the Bluetooth

adapter, “YBA-10 YAMAHA” (example) appears in

the Bluetooth device list.

• You only need the pairing operation for the first time that you

use the Bluetooth component with the Bluetooth adapter.

• Pairing requires operations on this unit and on the other

component with which Bluetooth communications are to be

established. If necessary, refer to the other component’s

operating instructions.

Select the Bluetooth adapter in the Bluetooth

device list and then enter the pass key

“0000” on the Bluetooth component.

When the pairing procedure is successful,

There are two pairing methods: pairing by using “START

PAIRING” in “SET MENU” and quick pairing.

“Completed” appears in the front panel display.

Note

■ Pairing by using “SET MENU”

Use this feature to perform pairing with the video monitor.

Select “START PAIRING” in “INPUT MENU”. See

page 61 for details.

The Yamaha Bluetooth adapter can be paired with up to eight

Bluetooth components. When pairing is conducted successfully

with a ninth component and the pairing data is registered, the

pairing data for the least recently used other component is

cleared.

■ Quick pairing

Playback of the Bluetooth™

component

To ensure security, a time limit of 8 minutes is set for the

pairing operation. You are recommended to read and fully

understand all the instructions before starting.

Press INPUT l/ hrepeatedly (or press

V-AUX/DOCK) to select “V-AUX” as the

Press V-AUX/DOCK to select “V-AUX” as

input source.

the input source.

Start playback of your Bluetooth component.

When the connected Bluetooth adapter detects the

Bluetooth component, “BT connected” and the

DOCK indicator appears in the front panel display.

Turn on the Bluetooth component you want

to pair with.

Press and hold BAND for 3 seconds to

start pairing.

• When you press ENTER, the connected Bluetooth adapter

searches and connect to the last connected Bluetooth

Once the Bluetooth adapter starts pairing,

“Searching...” appears for a moment. While the

Bluetooth adapter is in the pairing mode, DOCK

indicator flashes in the front panel display.

component. If the Bluetooth adapter cannot find the Bluetooth

component, “Not found” appears in the front panel display.

• To disconnect the Bluetooth adapter from the Bluetooth

component, press RETURN.

To cancel the pairing, press or BAND again.

47 En

Download from Www.Somanuals.com. All Manuals Search And Download.

RECORDING

Recording

Recording adjustments and other operations are performed from the recording components. Refer to the operating

instructions for those components.

Notes

• When this unit is set to the standby mode, you cannot record between other components connected to this unit.

• TONE CONTROL (see page 41) and VOLUME settings, speaker levels (see page 41) and the sound field programs (see page 38) do

not affect recorded material.

• The source connected to the MULTI CH INPUT jacks of this unit cannot be recorded.

• Digital signals input at the DIGITAL INPUT jacks are not output at the analog AUDIO OUT (REC) jacks for recording. Therefore, if

your source component is connected to provide only digital signals, you cannot record the source.

• S-video and composite video signals pass independently through the video circuits of this unit. Therefore, when recording or dubbing

video signals input from a video source component that provides only an S-video or a composite video signal, you can record only an

S-video or a composite video signal on your DVD recorder.

• A given input source is not output on the same OUT (REC) channel.

• The analog audio signals input at the DOCK terminal can be output at the analog AUDIO OUT (REC) jacks for recording.

• Once you have connected a recording component to this unit, keep the component turned on while using this unit. If the component is

turned off, this unit may distort the sound from other components.

• Check the copyright laws in your country to record from CDs, radio, etc. Recording of copyrighted material may infringe copyright

laws.

Do a test recording before you start an actual recording.

If you play back a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture

itself may be disturbed due to those signals.

Turn on all the connected components.

Start playback on the selected source

component or select a broadcast station.

Press INPUT l/ hrepeatedly (or press

one of the input selector buttons ( )) to

select the source component you want to

record from.

Start recording on the recording component.

48 En

Download from Www.Somanuals.com. All Manuals Search And Download.

SET MENU

You can use the following parameters in “SET MENU” to adjust a variety of system settings and customize the way this

unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening

environment.

■ Auto setup AUTO SETUP

Use this feature to automatically adjust speaker and system parameters (see page 24).

■ Manual setup MANUAL SETUP

Use this feature to manually adjust speaker and system parameters.

Sound menu 1 SOUND MENU

Parameter

Features

Page

Selects the size of each speaker, the speakers for low-frequency signal output, and the

crossover frequency, and the location of the front speakers connected to the FRONT B

terminals.

A)SPEAKER SET

Adjusts the output level of each speaker.

B)SP LEVEL

Adjusts the delay time of each speaker.

C)SP DISTANCE

D)CENTER GEQ

E)LFE LEVEL

F)DYNAMIC RANGE

G)AUDIO SET

Adjusts the tonal quality of the center speaker.

Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.

Adjusts the dynamic range of Dolby Digital or DTS signals.

Adjusts the muting level, audio delay, maximum volume level and initial volume level.

Selects whether to play back HDMI audio signals on this unit or on another HDMI

component connected to the HDMI OUT jack.

H)HDMI SET

Use this feature to enjoy 6.1/7.1-channel playback for multi-channel sources using the

Dolby Pro Logic IIx, Dolby Digital EX, or DTS-ES decoders by using the connected

surround back speakers.

I)EXTD SUR.

Input menu 2 INPUT MENU

Parameter

A)I/O ASSIGNMENT

B)INPUT RENAME

C)VOLUME TRIM

Features

Assigns the input/output jacks of this unit according to the component to be used.

Changes the name of the input source.

Page

Adjusts the output volume of each input source.

Selects the decoder mode for the sources connected to the DIGITAL INPUT jacks on the

rear panel of this unit.

D)DECODER MODE

E)MULTI CH SET

Selects the video source played in the background of the sources input from the MULTI CH

INPUT jacks.

49 En

Download from Www.Somanuals.com. All Manuals Search And Download.

SET MENU

Option menu 3 OPTION MENU

Parameter

Features

Page

Adjusts the brightness of the front panel display and the way in which iPod information is

displayed.

A)DISPLAY SET

B)MEMORY GUARD

C)AUDIO SELECT

D)PARAM. INI

Locks sound field program parameters and other “SET MENU” settings.

Designates the default audio input jack select setting for the input sources connected to the

DIGITAL INPUT jacks when you turn on the power of this unit.

Initializes the parameters of a group of sound field programs.

Pair the connected Yamaha Bluetooth adapter (such as YBA-10, sold separately) with a

Bluetooth component (see page 47).

E)BLUETOOTH SET

F)USB PLAY STYLE

Adjusts the playback style of a USB source.

■ Signal information SIGNAL INFO

Use this feature to check audio signal information (see page 36).

Using SET MENU

Use the remote control to access and adjust each

parameter.

Press ENTER to enter “MANUAL SETUP”.

The “MANUAL SETUP” display appears in the

OSD.

;MANUAL SETUP

You can change the “SET MENU” parameters while this unit is

. 1 SOUND MENU

2 INPUT MENU

3 OPTION MENU

reproducing sound.

Press AMP and then press MENU to

enter “SET MENU”.

[ ]/[ ]:Up/Down

[ENTER]:Enter

The top “SET MENU” display appears in the OSD.

Press k/ n/ l/ hand ENTER to select

SET MENU

TOPAMENU

and change the parameter.

• Press k/ nto select the desired menu or

. ;AUTO SETUP

.A;MANUAL SETUP

;SIGNAL INFO

parameter.

• Press l/ hto change the parameter value.

[ ]/[ ]:Up/Down

[ENTER]:Enter

• Press ENTER to enter the selected menu or to

confirm the parameter.

• Press RETURN to return to the previous menu

Press k/ nto select “MANUAL SETUP”.

level.

SET MENU

TOPAMENU

Press MENU to exit from “SET MENU”.

;AUTO SETUP

.A;MANUAL SETUP

;SIGNAL INFO

[ ]/[ ]:Up/Down

[ENTER]:Enter

50 En

Download from Www.Somanuals.com. All Manuals Search And Download.

SET MENU

Woofer section of a speaker is 16 cm (6.5 in) or larger:

large

1 SOUND MENU

Use this menu to manually adjust any speaker settings or

compensate for video signal processing delays when using

LCD monitors or projectors.

Woofer section of a speaker is smaller than 16 cm

(6.5 in): small

Front speakers FRONT SP

Choices: SMALL, LARGE

;MANUAL SETUP

1 SOUND MENU

;MANUAL SETUP

1 SOUND MENU

1/2

2/2

. A)SPEAKER SET

B)SP LEVEL

C)SP DISTANCE

D)CENTER GEQ

E)LFE LEVEL

[ ]/[ ]:Up/Down

[ENTER]:Enter

. F)DYNAMIC RANGE

G)AUDIO SET

H)HDMI SET

1 SOUND MENU

I)EXTD SUR.

A)SPEAKER SET

FRONT SP

[ ]/[ ]:Up/Down

[ENTER]:Enter

■ Speaker settings A)SPEAKER SET

Use this feature to manually adjust any speaker settings.

SMALL >LARGE

FRONT B speaker setting FRONT B

Use this feature to select the location of the front speakers

connected to the FRONT B terminals.

Choices: FRONT, ZONE B

When the front speakers are large

Select “LARGE” (large).

When the front speakers are small

Select “SMALL” (small).

1 SOUND MENU

Note

A)SPEAKER SET

When “LFE/BASS OUT” is set to “FRONT” (see page 52), you

can select only “LARGE” in “FRONT SP”. If the value of

“FRONT SP” is set to a setting other than “LARGE” in advance,

this unit automatically changes the value to “LARGE”.

FRONT B;;;;FRONT

[ ]/[ ]:Up/Down

[ ]/[ ]:Select

[

Center speaker CENTER SP

Choices: NONE, SML, LRG

•

Select “FRONT” to turn on or off SPEAKERS A and B

when the speakers connected to the FRONT B

terminals are set in the main zone.

Select “ZONE B” if the speakers connected to the

FRONT B terminals are set in another zone. If

SPEAKERS A is turned off and SPEAKERS B is

turned on, all the speakers including the subwoofer in

the main zone are muted and this unit outputs sound at

the FRONT B terminals only.

1 SOUND MENU

A)SPEAKER SET

CENTER SP

NONE >SML LRG

Notes

When the center speaker is large

Select “LRG” (large).

• If you connect headphones to the PHONES jack of this unit, the

sound is output from both headphones and the FRONT B

terminals when “FRONT B” is set to “ZONE B”.

• If a DSP program is selected when “FRONT B” is set to

“ZONE B”, this unit automatically enters the Virtual CINEMA

DSP mode (see page 39).

When the center speaker is small

Select “SML” (small).

When you do not use the center speaker

Select “NONE” (none). The center channel signals are

directed to the front left and right speakers.

51 En

Download from Www.Somanuals.com. All Manuals Search And Download.

SET MENU

Surround left/right speakers SUR. L/R SP

Choices: NONE, SML, LRG

LFE Bass out LFE/BASS OUT

Use this feature to select the speakers that output the LFE

(low-frequency effect) and the low-frequency signals.

Choices: SWFR, FRNT, BOTH

1 SOUND MENU

A)SPEAKER SET

SUR. L/R SP

1 SOUND MENU

A)SPEAKER SET

LFE/BASS OUT

NONE >SML LRG

SWFR FRNT>BOTH

When the surround speakers are large

Select “LRG” (large).

When a subwoofer is connected to this unit

and you want to get natural bass sound

Select “SWFR” (subwoofer). The LFE signals as well

as the low-frequency signals of other speakers set to

“SML” (or “SMALL”) are directed to the subwoofer.

When the surround speakers are small

Select “SML” (small).

When you do not use the surround speakers

Select “NONE” (none). This unit is set to the Virtual

CINEMA DSP mode (see page 39).

When a subwoofer is connected to this unit

and you want to get rich bass sound

Select “BOTH” (both). The low-frequency signals of

any source are output from the subwoofer. The LFE

signals as well as the low-frequency signals of other

speakers set to “SML” (or “SMALL”) are directed to

the subwoofer. The low-frequency signals of the front

left and right channels are directed to the front left and

right speakers and the subwoofer regardless of the

“FRONT SP” setting (see page 51).

Surround back left/right speakers

SUR.B L/R SP

Choices: NONE, SMLx1, SMLx2, LRGx1, LRGx2

1 SOUND MENU

A)SPEAKER SET

SUR.B L/R SP

When you do not use a subwoofer

Select “FRNT” (front). The LFE signals, the low-

frequency signals of the front left and right channels,

and the low-frequency signals of other speakers set to

“SML” (or “SMALL”) are all directed to the front left

and right speakers regardless of the “FRONT SP”

setting (see page 51).

NONE >SMLx1 SMLx2

When the surround back left and right

speakers are large

Select “LRGx2” (large x 2).

When the single surround back speaker is

large

Select “LRGx1” (large x 1).

When the surround back left and right

speakers are small

Select “SMLx2” (small x 2).

When the single surround back speaker is

small

Select “SMLx1” (small x 1).

When you do not use the surround back

speakers

Select “NONE” (none). The surround back channel

signals are directed to the surround left and right

speakers.

52 En

Download from Www.Somanuals.com. All Manuals Search And Download.

SET MENU

Crossover CROSS OVER

■ Speaker level B)SP LEVEL

Use this feature to select the crossover frequency of all the

speakers set to “SML” (or “SMALL”) in “SPEAKER

SET” (see page 51). All frequencies below the selected

frequency will be sent to the subwoofer or front speakers

depending on the setting of “LFE/BASS OUT” in

“SPEAKER SET” (see page 51).

Use this feature to manually adjust the output level of each

speaker.

Control range: –10 to +10 dB

Control step: 1 dB

Initial setting: 0 dB

Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz,

120Hz, 160Hz, 200Hz

1 SOUND MENU

B)SP LEVEL

. FR.L

FR.R

1 SOUND MENU

B)SP LEVEL

1/2

2/2

__________

.SUR.L

SUR.R

SBL

1 SOUND MENU

CNTR

SWFR

A)SPEAKER SET

CROSSOVER

SBR

FREQ;;;80Hz

SP LEVEL

Adjusted speaker

Subwoofer phase SUBWOOFER PHASE

Use this feature to switch the phase of your subwoofer if

bass sounds are lacking or unclear.

Front left speaker

FR.L

Front right speaker

Center speaker

FR.R

CNTR

SWFR

SUR.L

SUR.R

SBL

Choices: NORMAL, REVERSE

Subwoofer

1 SOUND MENU

A)SPEAKER SET

SUBWOOFER PHASE

Surround left speaker

Surround right speaker

Surround back left speaker

Surround back right speaker

>NORMAL REVERSE

SBR

•

Select “NORMAL” if you do not want to reverse the

phase of your subwoofer.

Select “REVERSE” to reverse the phase of your

subwoofer.

Notes

• The available speaker channels differ depending on the setting

of the speakers.

• Instead of “SBL” and “SBR”, “SUR.B” is displayed if “SUR.B

L/R SP” is set to either “SMLx1” or “LRGx1” (see page 52).

53 En

Download from Www.Somanuals.com. All Manuals Search And Download.

SET MENU

■ Speaker distance C)SP DISTANCE

Use this feature to manually adjust the distance of each

speaker and the delay applied to the respective channel.

Ideally, each speaker should be the same distance from the

main listening position. However, this is not possible in

most home situations. Thus, a certain amount of delay

must be applied to the sound from each speaker so that all

sounds will arrive at the listening position at the same

time.

■ Center speaker equalizer D)CENTER GEQ

Use this feature to adjust the built-in 5-frequency band

(100Hz, 300Hz, 1kHz, 3kHz and 10kHz) graphic

equalizer for the center channel so that the tonal quality of

the center speaker matches that of the front speakers. You

can make adjustments while listening to the currently

selected source component or a test tone.

Control range: –6.0 to +6.0 dB

Control step: 0.5 dB

Initial setting: 0 dB

1 SOUND MENU

C)SP DISTANCE

1 SOUND MENU

C)SP DISTANCE

1 SOUND MENU

1/2

2/2

. UNIT;;;;;;meters

FRONT L;;;;3.00m

FRONT R;;;;3.00m

CENTER;;;;;2.60m

SWFR;;;;;;;3.00m

[ ]/[ ]:Up/Down

. SUR. L;;;;;3.00m

SUR. R;;;;;3.00m

D)CENTER GEQ

TEST >OFF ON

. 100Hz ;;;;;;

300Hz ;;;;;;

1kHz ;;;;;;

0dB

[ ]/[ ]:Up/Down

[ ]/[ ]:Adjust

3kHz ;;;;;;

[ ]/[ ]:Adjust

10kHz ;;;;;;

[ ]/[ ]:Up/Down

[

[ ]/[ ]:Adjust

[

Unit UNIT

Choices: meters (m), feet (ft)

Initial setting: meters (m)

Test tone TEST

Use this feature to make adjustments for “CENTER GEQ”

while listening to a test tone.

•

Select “meters” to adjust speaker distances in meters.

Select “feet” to adjust speaker distances in feet.

Choices: OFF, ON

•

Select “OFF” to stop test tones and output the currently

selected source component.

Select “ON” to output test tones from the center and

front left speakers.

Speaker distances

Control range: 0.30 to 24.00 m (1.0 to 80.0 ft)

Control step: 0.10 m (0.5 ft)

•

Initial setting:

FRONT L/FRONT R/SWFR: 3.00 m (10.0 ft)

CENTER: 2.60 m (8.5 ft)

SUR. L/SUR. R/SB L/SB R: 2.40 m (8.0 ft)

■ Low-frequency effect level E)LFE LEVEL

Use this feature to adjust the output level of the LFE (low-

frequency effect) channel according to the capacity of

your subwoofer or headphones. The LFE channel carries

low-frequency special effects which are only added to

certain scenes. This setting is effective when the input

signal contains the LFE channel.

SP DISTANCE

FRONT L

FRONT R

CENTER

SWFR

Adjusted speaker

Front left speaker

Control range: –20 to 0 dB

Control step: 1 dB

Front right speaker

Center speaker

Subwoofer

1 SOUND MENU

E)LFE LEVEL

Surround left speaker

Surround right speaker

Surround back left speaker

Surround back right speaker

SUR. L

SUR. R

SB L

. SPEAKER;;;;;;0dB

HEADPHONE;;;;0dB

[ ]/[ ]:Up/Down

[ ]/[ ]:Adjust

[

SB R

Speaker SPEAKER

Notes

Adjusts the speaker LFE level.

• The available speaker channels differ depending on the setting

of the speakers.

• Instead of “SB L” and “SB R”, “SUR.B” is displayed if

“SUR.B L/R SP” is set to either “SMLx1” or “LRGx1” (see

page 52).

Headphone HEADPHONE

Adjusts the headphone LFE level.

Note

Depending on the settings of “LFE/BASS OUT” (see page 52),

some signals may not be output at the SUBWOOFER OUTPUT

jack.

54 En

Download from Www.Somanuals.com. All Manuals Search And Download.

SET MENU

Maximum volume MAX VOL.

■ Dynamic range F)DYNAMIC RANGE

Use this feature to select the amount of dynamic range

compression to be applied to your speakers or

headphones. This setting is effective only when this unit is

decoding Dolby Digital and DTS signals.

Use this feature to set the maximum volume level. This

feature is useful to avoid the unexpected loud sound by

mistake. For example, the original volume range is –80dB

to +16 dB. However, when “MAX VOL.” is set to –5 dB,

the volume range becomes –80 dB to –5 dB.

1 SOUND MENU

Control range: +10 dB to –30 dB, +16 dB

Control step: 5 dB

F)DYNAMIC RANGE

. SPEAKER;;;;;;MAX

HEADPHONE;;;;MAX

Note

The “MAX VOL.” setting takes priority over the “Initial Volume”

setting. For example, if “INIT.VOL.” is set to –20 dB and “MAX

VOL.” is set to –30 dB, the volume level is automatically set to

–30 dB when you turn on the power of this unit next time.

[ ]/[ ]:Up/Down

[ ]/[ ]:Adjust

[

Speaker SPEAKER

Initial volume INIT.VOL.

Adjusts the speaker compression.

Use this feature to set the volume level when the power of

this unit is turned on.

Choices: OFF, MUTE, –80 dB to +16 dB

Control step: 1 dB

Headphone HEADPHONE

Adjusts the headphone compression.

Choices: MIN, STD, MAX

•

Select “MIN” (minimum) if you regularly listen at low

volume levels.

Note

•

Select “STD” (standard) for general use.

Select “MAX” (maximum) to preserve the greatest

amount of dynamic range.

The “MAX VOL.” setting takes priority over the “INIT.VOL.”

setting.

■ Audio settings G)AUDIO SET

Use this feature to adjust the overall audio settings of this

unit.

1 SOUND MENU

G)AUDIO SET

. MUTE TYPE;;;FULL

A.DELAY;;;;;;0ms

MAX VOL.;;;+16dB

INIT.VOL.;;;;OFF

[ ]/[ ]:Up/Down

[ ]/[ ]:Select

[

Mute type MUTE TYPE

Use this feature to adjust how much the mute function

reduces the output volume (see page 35).

Choices: FULL, –20dB

•

Select “FULL” to completely mute all the audio

output.

•

Select “–20dB” to reduce the current volume by 20 dB.

Audio delay A.DELAY

Use this feature to delay the sound output and synchronize

it with the video image. This may be necessary when

using certain LCD monitors or projectors.

Control range: 0 to 160 ms

Control step: 1 ms

55 En

Download from Www.Somanuals.com. All Manuals Search And Download.

SET MENU

■ HDMI set H)HDMI SET

Use this feature to select the component to play back

HDMI audio signals.

■ Extended surround I)EXTD SUR.

1 SOUND MENU

I)EXTD SUR.

>AUTO LAST

EXTD SUR.;;;;;;AUTO

1 SOUND MENU

H)HDMI SET

[ ]/[ ]:Select

[

[ENTER]:Return

SUPPORT AUDIO:

DSP-AX563

[ ]/[ ]:Select

[

[ENTER]:Return

Extended decoder select mode

Use this feature to designate the extended decoder mode

for the input sources connected to the DIGITAL INPUT

jacks when you turn on the power of this unit.

Choices: AUTO, LAST

Support audio SUPPORT AUDIO

Use this feature to select whether to play back HDMI

audio signals on this unit or on another HDMI component

connected to the HDMI OUT jack on the rear panel of this

unit.

•

Select “AUTO” if you want this unit to automatically

detect the digital audio input signal and activate the

appropriate decoder.

Choice

Functions

•

Select “LAST” if you want this unit to automatically

select the last decoder mode set for “EXTD SUR.”.

Plays back HDMI audio signals on this unit. The

HDMI audio signals input at the HDMI input

jacks of this unit are not output to the HDMI

component connected to the HDMI OUT jack on

the rear panel of this unit.

DSP-AX563

Extended decoder specifying

Use this feature to enjoy 6.1/7.1-channel playback for

multi-channel sources using the Dolby Pro Logic IIx,

Dolby Digital EX, or DTS-ES decoders by using the

connected surround back speakers.

Plays back HDMI audio signals on another

HDMI component connected to the HDMI OUT

jack.

Other

Choice

Functions

Activates the optimum decoder to play back

signals in 6.1/7.1 channels when this unit

recognizes a signal flag being input.

AUTO

Notes

• This unit transmits audio and video signals input at the HDMI

input jacks to the HDMI out jack only when this unit is turned

on even if “SUPPORT AUDIO” is set to “Other”.

• Available audio/video signals depend on the specification of the

connected video monitor. Refer to the instruction manual of

each connected component.

Plays back Dolby Digital or DTS signals in

7.1 channels using the Pro Logic IIx movie

decoder.

PLIIxMovie

(when 2 surround

back speakers are

used.)

Plays back Dolby Digital or DTS signals in

6.1/7.1 channels using the Pro Logic IIx

music decoder.

PLIIxMusic

Plays back Dolby Digital or DTS signals in

6.1/7.1 channels using the Dolby Digital EX

or DTS-ES decoder.

EX/ES

Does not use any decoders to create 6.1/7.1

channels.

OFF

56 En

Download from Www.Somanuals.com. All Manuals Search And Download.

SET MENU

For OPTICAL OUTPUT jack 4

OPTICAL OUT (4)

2 INPUT MENU

Use this menu to reassign the input jacks, select the

decoder mode or rename the input source.

Choices: (4) MD/CD-R, DTV/CBL, V-AUX, DVR

2 INPUT MENU

;MANUAL SETUP

A)I/O ASSIGNMENT

OPTICAL OUT

. (4);;;;;MD/CD-R

(MD/CD-R )

2 INPUT MENU

. A)I/O ASSIGNMENT

B)INPUT RENAME

C)VOLUME TRIM

D)DECODER MODE

E)MULTI CH SET

[ ]/[ ]:Up/Down

[ENTER]:Enter

[ ]/[ ]:Select

[

For HDMI jacks 1 and 2

HDMI IN [1]

■ Input and output assignment

A)I/O ASSIGNMENT

HDMI IN [2]

Use this feature to assign the input jacks according to the

component to be used if the initial settings of this unit do

not correspond to your needs. Change the following

parameters to reassign the respective jacks and effectively

connect more components.

Choices: [1] DVD, DTV/CBL, V-AUX, DVR

[2] DVD, DTV/CBL, V-AUX, DVR

2 INPUT MENU

Once the input jacks are reassigned, you can select the

corresponding component by using RINPUT l/ h(or

the input selector buttons (3)).

A)I/O ASSIGNMENT

HDMI IN

. [IN1];;; DVD

(

DVD

)

[IN2];;;DTV/CBL

(DTV/CBL )

For COAXIAL INPUT jack 1

COAXIAL IN (1)

[ ]/[ ]:Select

[

Choices: (1) CD, MD/CD-R, DVD, DTV/CBL,

V-AUX, DVR

2 INPUT MENU

A)I/O ASSIGNMENT

COAXIAL IN

. (1);;;;; DVD

(

DVD

)

[ ]/[ ]:Select

[

For OPTICAL INPUT jacks 2 and 3

OPTICAL IN (2)

OPTICAL IN (3)

Choices: (2) CD, MD/CD-R, DVD, DTV/CBL,

V-AUX, DVR

(3) CD, MD/CD-R, DVD, DTV/CBL,

V-AUX, DVR

2 INPUT MENU

A)I/O ASSIGNMENT

OPTICAL IN

. (2);;;;;DTV/CBL

(DTV/CBL )

(3);;;;;

(

)

[ ]/[ ]:Select

[

Note

You cannot select a specific item more than once.

57 En

Download from Www.Somanuals.com. All Manuals Search And Download.

SET MENU

■ Input rename B)INPUT RENAME

Use this feature to change the name of the input source

that appears in the OSD and in the front panel display.

■ Volume trim C)VOLUME TRIM

Use this feature to adjust the output volume of each

source. This is useful if you want to balance the level of

each input source to avoid sudden changes in volume

when switching between input sources.

Choices: CD, MD/CD-R, TUNER, DVD,

DTV/CBL, V-AUX, DVR, DOCK, USB,

MULTI CH

2 INPUT MENU

B)INPUT RENAME

DVD

-> DVD

Control range: –6.0 to +6.0 dB

Control step: 1.0 dB

Initial setting: 0.0 dB

[ ]/[ ]:Position

[ ]/[ ]:Chara.

[

)

2 INPUT MENU

C)VOLUME TRIM

Press one of the input selector buttons (

or MULTI CH IN to select the input

source you want to change the name of.

DVD

DVD ;;;;;0.0dB

USB

[ ]/[ ]:Adjust

[RETURN]:Exit

[

DVD

MD/CD-R TUNER

MULTI CH IN

DTV/CBL

DVR

Note

V-AUX/DOCK

You can only adjust the value for DOCK when your iPod is

stationed in the Yamaha Universal Dock connected to this unit.

■ Decoder mode D)DECODER MODE

Press AMP and then press l/ hon the

remote control to place the “_” (underscore)

under the space or the character you want to

edit.

2 INPUT MENU

D)DECODER MODE

>AUTO LAST

CD ;;;;AUTO

DVD ;;;;AUTO

DTV/CBL ;;;;AUTO

Press k/ nto select the character you

want to use and then press l/ hto move

[ ]/[ ]:Up/Down

[ ]/[ ]:Select

[

to the next space.

Decoder select mode

Notes

Use this feature to designate the default decoder mode for

the input sources connected to the DIGITAL INPUT jacks

when you turn on the power of this unit.

• You can use up to 8 characters for each input.

• Press nto change the character in the following order,

Choices: AUTO, LAST

or press kto go in the reverse order:

A to Z, a space, 0 to 9, a space, a to z, a space, symbols (#,

*, –, +, etc.)

•

Select “AUTO” if you want this unit to automatically

detect the type of input signals and select the

appropriate decoder mode.

Repeat steps 1 through 3 to rename each

input source.

•

Select “LAST” if you want this unit to automatically

select the last decoder mode used the connected input

source.

Press ENTER to exit from “INPUT

RENAME”.

DTS decoder prioritize setting

Choices: AUTO, DTS

•

Select “AUTO” if you want this unit to automatically

detect input signal types and select the appropriate

input mode.

•

Select “DTS” when you play back a DTS-CD.

58 En

Download from Www.Somanuals.com. All Manuals Search And Download.

SET MENU

■ Multi channel input setup

E)MULTI CH SET

3 OPTION MENU

Use this menu to adjust the optional system parameters.

2 INPUT MENU

E)MULTI CH SET

BGV;;;;;;;;;LAST

INPUT CH;;;;;6CH

;MANUAL SETUP

3 OPTION MENU

;MANUAL SETUP

3 OPTION MENU

1/2

2/2

. A)DISPLAY SET

B)MEMORY GUARD

C)AUDIO SELECT

D)PARAM. INI

E)BLUETOOTH SET

. F)USB PLAY STYLE

[ ]/[ ]:Select

p [

Background Video BGV

[ ]/[ ]:Up/Down

[ENTER]:Enter

[ ]/[ ]:Up/Down

[ENTER]:Enter

Use this feature to select the video source played in the

background of the sources input at the MULTI CH INPUT

jacks.

■ Display settings A)DISPLAY SET

Choices: DVD, DTV/CBL, V-AUX, DVR, LAST

3 OPTION MENU

A)DISPLAY SET

3 OPTION MENU

A)DISPLAY SET

Select “LAST” to set this unit to automatically select the last

selected video source as the background video source.

1/2

2/2

DIMMER;;;;;;;;;0

VIDEO CONV;;;;ON

FL SCROLL;;;CONT

. OSD SHIFT;;;;;;0

OSD-SOURCE;;;30s

OSD-AMP;;;;;;30s

Input channels INPUT CH

Use this setting to select the number of channels input

from an external decoder (see page 19).

Choices: 6CH, 8CH

[ ]/[ ]:Up/Down

[ ]/[ ]:Select

[ ]/[ ]:Up/Down

[ ]/[ ]:Select

[

Dimmer DIMMER

Use this feature to adjust the brightness of the front panel

2 INPUT MENU

display.

E)MULTI CH SET

Control range: –4 to 0

Control step: 1

BGV;;;;;;;;;LAST

INPUT CH;;;;;8CH

FRONT;;;;;;;;DVD

•

Press lto make the front panel display dimmer.

[ ]/[ ]:Select

p [

Press hto make the front panel display brighter.

If the connected component outputs discrete

6-channel audio signals.

Select “6CH”.

Video conversion VIDEO CONV.

Use this feature to set whether to convert the video signals

input at the VIDEO and S VIDEO jacks.

Choices: ON, OFF

If the connected component outputs discrete

8-channel audio signals.

Select “8CH”. Also set “FRONT” (see below) to the

analog audio jacks at which the front left and right

channel signals output from the connected component

are input.

•

Select “ON” to convert composite and S-video signals

interchangeably, or to convert composite and S-video

to component video signals.

•

Select “OFF” not to convert any signals.

Notes

• This unit does not convert 480 line video signals and 576 line

video signals interchangeably.

Front left and right channels input jack FRONT

If you selected “8CH” in “INPUT CH”, you can select the

analog audio jacks at which the front left and right channel

signals output from the connected external decoder is

input.

• The converted video signals are only output at the MONITOR

OUT jacks. When recording a video source, you must make the

same type of video connections between each component.

• When composite video or S-video signals from a VCR are

converted to component video signals, the picture quality may

suffer depending on your VCR.

Choices: DVD, DTV/CBL, DVR, V-AUX

• Unconventional signals input at the composite video or S-video

jacks cannot be converted or may be output abnormally. In such

cases, set “VIDEO CONV.” to “OFF”.

• When non-standard video signals (such as video signals from a

game console) are input, this unit may not convert the signals

even if you set “VIDEO CONV.” to “ON”.

Note

“FRONT” parameter appears only when you set “INPUT CH” to

“8CH”.

59 En

Download from Www.Somanuals.com. All Manuals Search And Download.

SET MENU

Front panel display scroll FL SCROLL

Use this feature to set whether to display the information

(such as a song title or a channel name) in the front panel

display in a continuous manner or by the first 14

alphanumeric characters after scrolling all characters once

when “DOCK” is selected as the input source.

Choices: CONT, ONCE

■ Memory guard B)MEMORY GUARD

Use this feature to prevent accidental changes to DSP

program parameter values and other system settings.

Choices: OFF, ON

3 OPTION MENU

B)MEMORY GUARD

•

Select “CONT” to display the operation status in the

>OFF

front panel display in a continuous manner.

•

Select “ONCE” to display the operation status in the

front panel display by the first 14 alphanumeric

characters after scrolling all characters once.

[ ]/[ ]:Select

[

OSD shift OSD SHIFT

•

Select “OFF” to turn off the “MEMORY GUARD”

feature.

Select “ON” to protect:

– sound field program parameters

– all “SET MENU” items

– all speaker levels

Use this feature to adjust the vertical position of the OSD.

Control range: –5 (dowmward) to +5 (upward)

Control step: 1

Initial setting: 0

•

Press lto lower the position of the OSD.

– SCENE template parameters

Press hto raise the position of the OSD.

Source feature OSD display time

OSD-SOURCE

Note

When “MEMORY GUARD” is set to “ON”, you cannot select

and adjust any other “SET MENU” items.

Use this feature to set the amount of time to display the

iPod menu in the OSD after you perform a certain

operation.

■ Audio select C)AUDIO SELECT

Use this feature to designate the default audio input jack

select setting for the input sources when you turn on the

power of this unit.

Choices: ON, 10s, 30s

•

Select “ON” to display the OSD unceasingly during an

operation.

Select “10s” to turn off the OSD 10 seconds after you

perform a certain operation.

Select “30s” to turn off the OSD 30 seconds after you

perform a certain operation.

Choices: AUTO, LAST

3 OPTION MENU

C)AUDIO SELECT

>AUTO LAST

Amplifier function OSD display time

OSD-AMP

Use this feature to set the amount of time to display the

status after you perform a certain operation.

Choices: ON, 10s, 30s

[ ]/[ ]:Select

[

•

Select “AUTO” if you want this unit to automatically

detect the type of input signals and select the

appropriate input mode.

Select “LAST” if you want this unit to automatically

select the last input mode used for the connected input

source (see page 34).

•

Select “ON” to display the OSD constantly during an

operation.

Select “10s” to turn off the OSD 10 seconds after you

perform a certain operation.

Select “30s” to turn off the OSD 30 seconds after you

perform a certain operation.

60 En

Download from Www.Somanuals.com. All Manuals Search And Download.

SET MENU

■ Parameter initialization D)PARAM. INI

Use this feature to set all the parameters of the sound field

programs to the initial factory settings.

Choices: NO, YES

■ Bluetooth setting E)BLUETOOTH SET

3 OPTION MENU

E)BLUETOOTH SET

. START PAIRING

3 OPTION MENU

D)PARAM. INI

[ENTER]:Enter

>NO

YES

Use this feature to start pairing the connected Yamaha

Bluetooth adapter (such as YBA-10, sold separately) with

your Bluetooth component. For details about the pairing,

refer to “Pairing the Bluetooth™ adapter and your

Bluetooth™ component” on page 47.

[ ]/[ ]:Select

[

[ENTER]:Return

•

Select “NO” to cancel the parameter initialization and

return to the previous menu screen.

To ensure security, a time limit of 8 minutes is set for

the pairing operation. You are recommended to read

and fully understand all the instructions before starting.

Select “YES” and press ENTER to set all the sound

field parameters to the initial factory settings.

Notes

• You cannot automatically revert to the previous parameter

settings once you initialize the sound field program parameters.

• You cannot separately initialize individual sound field

programs.

• You cannot initialize any sound field program groups when

“MEMORY GUARD” is set to “ON”.

ENTER to start pairing.

The connected Bluetooth adapter starts searching

Bluetooth components. “Searching...” appears in the

video monitor.

Check that the Bluetooth component detects

the Bluetooth adapter.

If the Bluetooth component the Bluetooth adapter,

“YBA-10 YAMAHA” (example) appears in the

Bluetooth device list.

Select the Bluetooth adapter in the Bluetooth

device list and then enter the pass key

“0000” on the Bluetooth component.

Once this unit completes the pairing successfully,

“Pairing completed” appears.

To cancel the pairing, press RETURN to exit from

“START PAIRING”.

Press RETURN to exit from “START

PAIRING”.

Notes

• If the connected Bluetooth adapter cannot find any Bluetooth

components, “Not found” appears.

• If a Bluetooth adapter is not connected to this unit, “No BT

adapter” appears.

61 En

Download from Www.Somanuals.com. All Manuals Search And Download.

SET MENU

■ USB playback styles F)USB PLAY STYLE

Use this feature to adjust the playback style according to

your preference. You can shuffle files in a random order or

repeat one specific file or a sequence of files.

3 OPTION MENU

F)USB PLAY STYLE

REPEAT.......OFF

. SHUFFLE......OFF

[ ]/[ ]:Up/Down

[ ]/[ ]:Select

[

Repeat REPEAT

Use this feature to set this unit to repeat one file or a

sequence of files.

Choices: OFF, SINGLE, ALL

•

Select “OFF” to deactivate this feature.

Select “SINGLE” to set this unit to repeat one file.

Select “ALL” to set this unit to repeat a sequence of

files.

Shuffle SHUFFLE

Use this feature to set this unit to play files or folders in a

random order.

Choices: OFF, ON

•

Select “OFF” to deactivate this feature.

Select “ON” to set this unit to play files or folders in a

random order.

62 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote control features

In addition to controlling this unit, the remote control can also operate other audiovisual components made by Yamaha

and other manufacturers. To control your TV or other components, you must set up the appropriate remote control code

for each input source (see page 65).

Controlling this unit, a TV, or other components

■ Controlling this unit

Press AMP to control this unit.

■ Controlling a TV

Press DTV/CBL to control your TV. To control your

TV, you must set the appropriate remote control code for

DTV/CBL (see page 65).

POWER POWER

STANDBY

POWER

MUTE

USB

POWER POWER

STANDBY

POWER

MUTE

DVD

MD/CD-R TUNER

USB

TV CH

DTV/CBL

DVR

DVD

MD/CD-R TUNER

V-AUX/DOCK

AMP

TV CH

DTV/CBL

DVR

TV VOL

TV INPUT

TV MUTE

DTV/CBL

V-AUX/DOCK

AMP

TV VOL

TV INPUT

TV MUTE

SCENE

BAND LEVEL

SCENE

VOLUME

TITLE

BAND LEVEL

TITLE

VOLUME

ENTER

DISPLAY

RETURN

MEMORY

REC

DISPLAY

RETURN

MEMORY

REC

FREQ/TEXT

EON

MODE

PTY SEEK - START

PROG

ENHANCER SUR. DECODE

FREQ/TEXT

EON

MODE

PTY SEEK - START

STRAIGHT DIRECT

NIGHT

PARAMETER

PROG

ENHANCER SUR. DECODE

MULTI CH IN AUDIO SEL

SLEEP

ENT

STRAIGHT DIRECT

NIGHT

PARAMETER

MULTI CH IN AUDIO SEL

SLEEP

ENT

Notes

^*1These buttons always control this unit.

^*1These buttons always control your TV regardless of whether

These buttons control this unit only when AMP is pressed.

you press DTV/CBL or not.

Remote control

Digital TV/Cable TV

Turns on or off the power.

TV POWER

TV CH +/–

Changes the channel number.

Increases or decreases the volume

level.

TV VOL +/–

Changes the input source.

Mutes the audio output.

TV INPUT

TV MUTE

These buttons control your TV only when DTV/CBL is

pressed. For details, see the “Digital TV/Cable TV” column on

page 64.

You can control more than one TV by setting the appropriate

remote control code for any input source selector buttons other

than DTV/CBL. In such a case, you can control the buttons

highlighted above (*1 and *2) when you press the input source

selector button.

63 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote control features

■ Controlling other components

Press one of the input selector buttons (3) or A to D

buttons to control othercomponents. You must set the

appropriate remote control code for each input source in

advance (see page 65). The following table shows the

function of each control button used to control other

components assigned to each input selector button. Be

advised that some buttons may not correctly operate the

selected component.

BAND LEVEL

TITLE

VOLUME

[2]

[1]

POWER POWER

STANDBY

POWER

MUTE

[7]

[8]

USB

ENTER

[3]

[4]

[5]

DVD

MD/CD-R TUNER

RETURN

DISPLAY

MEMORY

TV CH

DTV/CBL

DVR

REC

V-AUX/DOCK

AMP

TV VOL

TV INPUT

TV MUTE

FREQ/TEXT

EON

MODE

PTY SEEK START

PROG

ENHANCER SUR. DECODE

• The remote control has 13 modes (input areas) to control

components so that the remote control can operate up to 13

different components.

SCENE

STRAIGHT DIRECT

NIGHT

PARAMETER

[6]

MULTI CH IN AUDIO SEL

SLEEP

ENT

[9]

• When you press one of the optional component control area

buttons (A to D), you can control the desired component

without changing the input source of this unit.

DVD player/

recorder

Digital TV/

Cable TV

MD/CD

recorder

Remote control

VCR

LD player

CD player

Tuner

[1] AV POWER

[2] TITLE

Power *1

Title

Power *1

Power *2

Power *1

Band

[3] PRESET/CH k

Preset up (1-8)/

Tuning up

VCR channel up Up

VCR channel

Preset down

(1-8)/Tuning

down

PRESET/CH n

Down

down

Preset down

(A-E)

A/B/C/D/E l

A/B/C/D/E h

Left

Preset up

(A-E)

Right

ENTER

[4] RETURN

[5] REC

Enter

Hold

Return

Memory

Disc skip

(player)

Rec (recorder)

Rec

Rec *2

Disc skip

Play

Rec

Play

Play *2

Play

backward

Searchbackward

Search backward

Search backward Search backward Search backward Information

Search forward

Search forward Search forward

Pause Pause

Skip backward Skip backward

Search forward

Pause

Search forward Search forward

Pause *2

Pause

Skip backward

Audio program

down

Skip backward

Audio program

Skip forward

Stop

Skip forward

Stop

Skip forward *2 Skip forward

Stop *2 Stop

Skip forward

Stop

Skip forward

Stop

[6] 1-9, 0, +10

Preset stations

(1-8)

Numeric buttons Numeric buttons Numeric buttons Numeric buttons Numeric buttons Numeric buttons

[7] MENU

[8] DISPLAY

[9] ENT

Display

Enter

Search mode

Display

Title/Index

Display

Enter

Display

Index

Display

Index

Chapter/Time

Enter

Notes

^*1This button is operational only when the original remote control supplied with the component has a POWER button.

^*2These buttons operate your DVD recorder only when you set the appropriate remote control code for DVR (see page 65).

64 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote control features

Setting remote control codes

You can control other components by setting the

appropriate remote control codes. For a complete list of

available remote control codes, refer to “List of remote

control codes” at the end of this manual.

While pressing and holding one of the input

selector buttons ( ) on the remote control to

select the input area you want to set up,

press AV POWER for more than 3

seconds.

USB

Remote control code default settings

MD/CD-R TUNER

Input

source

Component

category

Default

code

Manufacturer

POWER

DVD

DTV/CBL

DVR

MD/CD-R

TUNER

DVD

DTV/CBL

V-AUX

DVR

USB

Yamaha

—

5013

5001

5007

2000

—

Press for 3

seconds

V-AUX/DOCK

CD-R

While holding down

TUNER

DVD

Press the numeric buttons (0 to 9) ( ) to

enter the four-digit remote control code for

the component to be used.

When the setting succeeds, “RemoteSetup OK”

appears; however, when it does not, “RemoteSetup

NG” appears in the front panel display.

—

TUNER

DVR

Yamaha

5011

2011

5012

5009

5017

5009

5017

TUNER

Notes

• If the manufacturer of your component has more than one code,

try each of them until you find the correct one.

• If you do not press any buttons within 30 seconds in step 2, the

setup process is canceled. If this happens, repeat the setup

procedure.

Note

You may not be able to operate your Yamaha component even if a

Yamaha remote control code is preset as listed above. In this case,

try setting another Yamaha remote control code.

65 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced setup

This unit has additional menus that are displayed in the

front panel display. The advanced setup menu offers

additional operations to adjust and customize the way this

unit operates. Change the initial settings (indicated in bold

under each parameter) to reflect the needs of your

listening environment.

■ Bi-amplifier setting BI-AMP

Use this feature to activate or deactivate the bi-amplifier

function (see page 12).

Choices: ON, OFF

•

Select “ON” if you want to activate the bi-amplifier

function. “SUR.B L/R SP” is set to “NONE”

automatically, and this unit outputs the front channel

audio signals at the SURROUND BACK/BI-AMP

speaker terminals.

Notes

• Only STANDBY/ON, PROGRAM l/ h, and

•

Select “OFF” if you want to deactivate the bi-amplifier

function.

STRAIGHT are effective while you are using the advanced

setup menu.

• No other operations can be made while you are using the

advanced setup menu.

• The advanced setup menu is only available in the front panel

display.

■ SCENE IR code setting SCENE IR

Use this feature to output the remote control signals at the

REMOTE OUT jack automatically when this unit is in the

SCENE mode.

Choices: ON, OFF

Press STANDBY/ON to set this unit to the

•

Select “ON” when the component connected to the

REMOTE OUT jack is the Yamaha component and has

the capability of the SCENE control signals. This unit

automatically sends the remote control signals to the

component.

standby mode.

Press and hold TONE CONTROL and

then press STANDBY/ON to turn on this

•

Select “OFF” when the component connected to the

REMOTE OUT jack is not the Yamaha component and

does not have the capability of the SCENE control

signals.

unit.

This unit turns on, and the advanced setup menu

appears in the front panel display.

Press PROGRAM l/ hto select the

Note

parameter you want to adjust.

The name of the selected parameter appears in the

front panel display.

If noises are output when you operate the SCENE function, set

“SCENE IR” to “OFF”.

■ Initializing INIT.

Use this feature to reset all the parameters of this unit to

the initial factory settings (see page 75).

Choices: CANCEL, RESET

Press STRAIGHT repeatedly to change

the selected parameter setting.

•

Select “CANCEL” not to reset any parameters of this

Press STANDBY/ON to confirm your

selection and set this unit to the standby

mode.

unit.

•

Select “RESET” to reset the parameters of this unit.

Notes

• This setting completely resets all the parameters of this unit

including the “SET MENU” parameters. However, the

advanced setup menu parameters will not be initialized.

• The initial factory settings are activated next time you turn on

this unit.

The settings you made are reflected next time you turn on this

unit.

66 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below

or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized

Yamaha dealer or service center.

■ General

See

page

Problem

Cause

Remedy

This unit fails to turn

on or enters the

standby mode soon

after the power is

turned on.

The power cable is not connected or the

plug is not completely inserted.

Connect the power cable firmly.

—

The protection circuitry has been

activated.

Make sure that all speaker wire connections on this

unit and on all speakers are secure and that the wire

for each connection does not touch anything other

than its respective connection.

—

This unit has been exposed to a strong

external electric shock (such as lightning

or strong static electricity).

Set this unit to the standby mode, disconnect the

power cable, plug it back in after 30 seconds and then

use it normally.

No sound.

Incorrect input or output cable

connections.

Connect the cables properly. If the problem persists,

the cables may be defective.

13-19

No appropriate Audio input jack select has Set an appropriate Audio input jack select.

been set.

Audio input jack select is set to “HDMI”,

“COAX/OPT” or “ANALOG”.

Set Audio input jack select to “AUTO”.

Audio input jack select is set to

“ANALOG” while playing a source

encoded in Dolby Digital or DTS.

Set Audio input jack select to “AUTO” or

“COAX/OPT”.

No appropriate input source has been

selected.

Select an appropriate input source with JINPUT

l/ h(or the input selector buttons(3)).

Speaker connections are not secure.

Secure the connections.

The front speakers to be used have not

been selected properly.

Select the front speakers with ESPEAKERS.

The volume is turned down.

The sound is muted.

Turn up the volume.

—

Press IMUTE or VOLUME +/– to resume audio

output and then adjust the volume.

Signals this unit cannot reproduce are

being input from a source component,

such as a CD-ROM.

Play a source whose signals can be reproduced by this

unit.

—

The HDMI components connected to this

unit do not support the HDCP copy

protection standards.

Connect HDMI components that support the HDCP

copy protection standards.

“SUPPORT AUDIO” is set to “Other” and Set “SUPPORT AUDIO” to “DSP-AX563” in

“HDMI” audio signals are not being

played back on this unit.

“MANUAL SETUP”.

67 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

See

page

Problem

Cause

Remedy

The sound suddenly

goes off.

The protection circuitry has been activated Check that the speaker wires are not touching each

—

because of a short circuit, etc.

The sleep timer has turned off this unit.

The sound is muted.

other and then turn this unit back on.

Turn on this unit, and play the source again.

—

Press IMUTE or VOLUME +/– to resume audio

output.

Sound is heard from

the speaker on one

side only.

Incorrect cable connections.

Connect the cables properly. If the problem persists,

the cables may be defective.

11-19

Incorrect settings in “SP LEVEL”.

Adjust the “SP LEVEL” settings.

This is not malfunction.

—

Only the center

speaker outputs

substantial sound.

When playing a monaural source with a

CINEMA DSP program, the source signal

is directed to the center channel, and the

front and surround speakers output effect

sounds.

No sound is heard

from the center

speaker.

“CENTER SP” in “SPEAKER SET” is set Set “CENTER SP” to “SML” or “LRG”.

to “NONE”.

One of the sound fieldprograms (except

for 7ch Stereo) has been selected.

Try another sound field program.

No sound is heard

from the surround

speakers.

“SUR. L/R SP” in “SPEAKER SET” is

set to “NONE”.

Set “SUR. L/R SP” to “SML” or “LRG”.

This unit is in the “STRAIGHT” mode

and a monaural source is being played

back.

Press STRAIGHT so that “STRAIGHT”

disappears from the front panel display.

No sound is heard

from the surround

back speakers.

“SUR. L/R SP” in “SPEAKER SET” is

set to “NONE” and “SUR.B L/R SP” is

automatically set to “NONE”.

Set “SUR. L/R SP” and “SUR. B L/R SP” to a setting

other than “NONE”.

“SUR.B L/R SP” in “SPEAKER SET” is

set to “NONE”.

Set “SUR.B L/R SP” to a setting other than “NONE”.

No sound from the

center, surround or

surround back

speakers when the

FRONT B speakers

are activated.

“FRONT B” in “SPEAKER SET” is set to Set “FRONT B” to “FRONT”.

“ZONE B”.

No sound is heard

from the subwoofer.

“LFE/BASS OUT” in “SPEAKER SET”

is set to “FRNT” when a Dolby Digital or

DTS signal is being played.

Set “LFE/BASS OUT” to “SWFR” or “BOTH”.

—

“LFE/BASS OUT” in “SPEAKER SET”

is set to “SWFR” or “FRNT” when a 2-

channel source is being played.

Set “LFE/BASS OUT” to “SWFR” or “BOTH”.

This is not malfunction.

The source does not contain low-

frequency bass signals.

68 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

See

page

Problem

Cause

Remedy

Dolby Digital or DTS

sources cannot be

played. (Dolby Digital

or DTS indicator in

the front panel

The connected component is not set to

output Dolby Digital or DTS digital

signals.

Make an appropriate setting following the operating

instructions for your component.

—

Audio input jack select is set to

“ANALOG”.

Set Audio input jack select to “AUTO”.

display does not light

up.)

A humming sound is

heard.

Incorrect cable connections.

Connect the audio cables firmly. If the problem

persists, the cables may be defective.

—

The volume level

cannot be increased,

or the sound is

distorted.

You are attempting to set the volume level Adjust “MAX VOL.” setting.

higher than the maximum volume level.

The component connected to the AUDIO

OUT (REC) jacks of this unit is turned

off.

Turn on the power of the component.

The sound effect

cannot be recorded.

It is not possible to record the sound effect This is not malfunction.

with a recording component.

—

A source cannot be

recorded by an

analog component

connected to the

AUDIO OUT (REC)

jacks.

The source component is not connected to Connect the source component to the analog AUDIO

15, 19

the analog AUDIO IN jacks of this unit.

IN jacks.

The sound field

“MEMORY GUARD” in “OPTION

Set “MEMORY GUARD” to “OFF”.

—

parameters and some MENU” is set to “ON”.

other settings of this

unit cannot be

changed.

This unit does not

operate properly.

The internal microcomputer has been

Disconnect the power cable from the AC wall outlet

and then plug it in again after about 30 seconds.

frozen by an external electric shock (such

as lightning or excessive static electricity)

or by a power supply with low voltage.

No sound is heard

from the connected

HDMI component.

The HDMI component does not accept the Convert the multi-channel audio signals to the 2-

—

multi-channel audio signals.

channel audio signals at the source component such

as a DVD player.

“CHECK SP WIRES”

appears in the front

panel display.

Speaker cables are short-circuited.

Make sure all speaker cables are connected correctly.

There is noise

interference from

digital or radio

This unit is too close to the digital or high- Move this unit further away from such equipment.

frequency equipment.

The picture is

disturbed.

The video source uses scrambled or

encoded signals to prevent dubbing.

This in not malfunction.

—

This unit suddenly

enters the standby

mode.

The internal temperature is too high and

the overheat protection circuitry has been

activated.

Wait about 1 hour for this unit to cool down and then

turn it back on.

The video conversion

function does not

work.

Some digital signals are input via HDMI

jack.

Turn off the power of the component connected to

HDMI IN jacks.

69 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

■ AUTO SETUP

Before AUTO SETUP

See

page

Error message

Cause

Remedy

Optimizer microphone is not connected.

Connect the supplied optimizer microphone

to the OPTIMIZER MIC jack on the front

panel.

Connect MIC!

—

Headphones are connected.

Unplug the headphones.

Unplug HP!

During AUTO SETUP

Error message

See

page

Cause

Remedy

Front L/R channel signals are not detected.

A surround channel signal is not detected.

Check the front L/R speaker connections.

Check the surround speaker connections.

E-1:NO FRONT SP

E-2:NO SUR.SP

E-3:SBR->SBL

Only a right surround back channel signal is Connect the surround back speaker to the

detected.

LEFT SURROUND BACK SPEAKERS

terminal if you only have one surround

back speaker.

Background noise is too loud.

Try running “AUTO SETUP” in a quiet

environment.

—

E-4:NOISY

Turn off noisy electric equipment like air

conditioners or move them away from the

optimizer microphone.

Surround back speakers are connected,

though surround L/R speakers are not.

Connect surround speakers when you use

surround back speakers.

E-5:CHECK SUR.

E-6:NO MIC

The optimizer microphone was unplugged

during the “AUTO SETUP” procedure.

Connect the supplied optimizer microphone

to OPTIMIZER MIC jack on the front

panel.

The optimizer microphone does not detect

test tones.

Check the microphone setting.

E-7:NO SIGNAL

Check the speaker connections and

placement.

10, 11,

The “AUTO SETUP” procedure was

cancelled due to user activity.

Run “AUTO SETUP” again.

E-8:USER CANCEL

An internal error occurred.

E-9:INTERNAL ERROR

70 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

After AUTO SETUP

See

page

Warning message

Cause

Remedy

Speaker polarity is not correct. This

message may appear depending on the

speakers even when the speakers are

connected correctly.

Check the speaker connections for proper

polarity (+ or –).

W-1:OUT OF PHASE

The distance between the nearest speaker

and the furthest speaker is out of adjustable position.

range.

Bring the speaker closer to the listening

—

24, 53

—

W-2:OVER 24m (80ft)

W-3:LEVEL ERROR

The difference of volume level among

speakers is excessive. (No level correction

is made.)

If “SWFR:TOO LOUD” or “SWFR:TOO

LOW” appears, adjust the output volume of

the subwoofer.

Readjust the speaker installation so that all

speakers are set in locations with similar

conditions.

Check the speaker connections.

Use speakers of similar quality.

—

Notes

• If the “ERROR” or “WARNING” screens appears, check the cause of the problem, then run “AUTO SETUP” again.

• If a warning message “W-1”, “W-2”, or “W-3” appears, corrections are made, but they may not be optimal.

• If an error message “E-9” occurs repeatedly, please contact a qualified Yamaha service center.

71 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

■ USB

See

page

Problem

Cause

Remedy

The music files and

directories in the USB in locations other than the FAT area.

device cannot be

viewed.

The music files and directories are placed

Place music files and directories in the FAT area.

—

You are attempting to browse directory

hierarchies of over 8 levels or a directory

with more than 500 files.

Modify the data structure on your USB device.

The USB device

The connected USB device is other than a This unit can recognize only a USB mass storage

cannot be recognized. USB mass storage class USB memory

class USB memory device (except USB hard disk

drives) or USB portable audio player. Also note that it

cannot recognize certain USB devices even when they

are devices as described above.

device or USB portable audio player.

Some devices may become easier to recognize when

they are inserted before turning this unit on.

“Disconnected” is

displayed even when

a USB device is

present.

This unit recognized the USB device as an Turn this unit off then on again.

illegal device.

See

page

Status message

Cause

Remedy

Your USB memory device or USB

portable audio player has been

disconnected from the USB port of this

unit.

Check the connection between this unit and your

USB memory device or USB portable audio player.

Disconnected

—

There is a problem with the signal path

from your USB memory device or USB

portable audio player to this unit.

Turn off this unit and reconnect your USB memory

device or USB portable audio player to the USB port

of this unit.

—

Try resetting your USB memory device or USB

portable audio player.

This unit cannot access your USB

memory device or USB portable audio

player.

Try another USB memory device or USB portable

audio player.

Access error

There is a problem with the signal path

from your USB memory device or USB

portable audio player to this unit.

Turn off this unit and reconnect your USB memory

device or USB portable audio player to the USB port

of this unit.

Try resetting your USB memory device or USB

portable audio player.

—

No varied data is detected.

Try another USB memory device or USB portable

audio player.

Unable to play

72 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

■ iPod

Note

In case of a transmission error without a status message appearing in the front panel and in the OSD, check the connection to your iPod

(see page 20).

See

page

Status message

Cause

Remedy

This unit is in the middle of recognizing

the connection with your iPod.

This unit is in the middle of acquiring

song lists from your iPod.

There is a problem with the signal path

from your iPod to this unit.

Turn off this unit and reconnect the Yamaha iPod

universal dock to the DOCK terminal of this unit.

Connect error

Try resetting your iPod.

—

The iPod being used is not supported by

this unit.

Only iPod (Click and Wheel), iPod nano, and iPod

mini are supported.

Unknown iPod

Your iPod is properly stationed in a

Yamaha iPod universal dock (YDS-10,

sold separately) connected to the DOCK

terminal of this unit, and the connection

between your iPod and this unit is

complete.

iPod connected

Your iPod was removed from a Yamaha

iPod universal dock (YDS-10, sold

separately) connected to the DOCK

terminal of this unit.

Station your iPod back in a Yamaha iPod universal

dock (YDS-10, sold separately) connected to the

DOCK terminal of this unit.

Disconnected

This unit cannot play back the songs

currently stored on your iPod.

Check that the songs currently stored on your iPod

are playable.

—

Unable to play

Store some other playable music files on your iPod.

73 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

■ Bluetooth

See

page

Status message

Cause

Remedy

The Bluetooth adapter and the Bluetooth

component is in the middle of the pairing.

Searching...

The Bluetooth adapter and the Bluetooth

component is in the middle of establishing

the connection.

The paring is completed.

Completed

Not found

The Bluetooth adapter cannot find the

Bluetooth component.

The paring is canceled.

Canceled

The connection between the Yamaha

Bluetooth adapter (such as YBA-10, sold

separately) and the Bluetooth component

is established.

BT connected

The Bluetooth component is disconnected

from the Yamaha Bluetooth adapter (such

as YBA-10, sold separately).

Disconnected

No BT adapter

The Bluetooth adapter is not connected to Connect the Yamaha Bluetooth adapter (such as

the DOCK terminal. YBA-10, sold separately) to the DOCK terminal.

74 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

■ Remote control

See

page

Problem

Cause

Remedy

The remote control

does not work nor

function properly.

Wrong distance or angle.

The remote control functions within a maximum

range of 6 m (20 ft) and no more than 30 degrees off-

axis from the front panel.

Direct sunlight or lighting (from an

inverter type of fluorescent lamp, etc.) is

striking the remote control sensor of this

unit.

Reposition this unit.

—

The batteries are weak.

Replace all batteries.

The remote control code is not correctly

set.

Set the remote control code correctly using “List of

remote control codes” at the end of this manual.

Try setting another code for the same manufacturer

using “List of remote control codes” at the end of this

manual.

Even if the remote control code is

correctly set, there are some models that

do not respond to the remote control.

■ Resetting the system

Use this feature to reset all the parameters of this unit to

Notes

the initial factory settings.

• This procedure completely resets all the parameters of this unit

including the “SET MENU” parameters. However, the

advanced setup menu parameters will not be initialized.

• The initial factory settings are activated next time you turn on

this unit.

Press STANDBY/ON on the front panel to

set this unit to the standby mode.

Press and hold TONE CONTROL and

then press STANDBY/ON to turn on this

To cancel the initialization procedure at any time without making

any changes, press STRAIGHT repeatedly to select

unit.

“CANCEL” and then press STANDBY/ON.

The advanced setup menu appears in the front panel

display.

Press PROGRAM l/ hto select “INIT.”.

Press STRAIGHT repeatedly to select

“RESET”.

Select “CANCEL” to cancel the initialization

procedure without making any changes.

Press STANDBY/ON to confirm your

selection and set this unit to the standby

mode.

75 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Glossary

■ Bi-amplification connection

■ Dolby Digital

A bi-amplification connection uses two amplifiers for a

speaker. One amplifier is connected to the woofer section

of a loudspeaker while the other is connected to the

combined mid and tweeter section. With this arrangement

each amplifier operates over a restricted frequency range.

This restricted range presents each amplifier with a much

simpler job and each amplifier is less likely to influence

the sound in some way. The internal crossover of the

speaker consists of a LPF (low pass filter) and a HPF (high

pass filter). As its name implies, the LPF passes

frequencies below a cutoff and rejects frequencies above

the cutoff frequency. Likewise, the HPF passes

Dolby Digital is a digital surround sound system that gives

you completely independent multi-channel audio. With 3

front channels (front L/R and center), and 2 surround

stereo channels, Dolby Digital provides 5 full-range audio

channels. With an additional channel especially for bass

effects, called LFE (Low Frequency Effect), the system

has a total of 5.1-channels (LFE is counted as 0.1

channel). By using 2-channel stereo for the surround

speakers, more accurate moving sound effects and

surround sound environment are possible than with Dolby

Surround. The wide dynamic range from maximum to

minimum volume reproduced by the 5 full-range channels

and the precise sound orientation generated using digital

sound processing provide listeners with unprecedented

excitement and realism. With this unit, any sound

environment from monaural up to a 5.1-channel

configuration can be freely selected for your enjoyment.

frequencies above its cutoff.

■ CINEMA DSP

Since the Dolby Surround and DTS systems were

originally designed for use in movie theaters, their effect

is best felt in a theater having many speakers designed for

acoustic effects. Since home conditions, such as room

size, wall material, number of speakers, and so on, can

differ so widely, it is inevitable that there are differences in

the sound heard. Based on a wealth of actually measured

data, Yamaha CINEMA DSP uses Yamaha original sound

field technology to combine Dolby Pro Logic, Dolby

Digital and DTS systems to provide the audiovisual

experience of a movie theater in the listening room of your

own home.

■ Dolby Digital EX

Dolby Digital EX creates 6 full-bandwidth output

channels from 5.1-channel sources. This is done using a

matrix decoder that derives 3 surround channels from the

2 in the original recording. For the best results, Dolby

Digital EX should be used with movie sound tracks

recorded with Dolby Digital Surround EX. With this

additional channel, you can experience more dynamic and

realistic moving sound especially with scenes with

“fly-over” and “fly-around” effects.

■ Component video signal

■ Dolby Pro Logic II

With the component video signal system, the video signal

is separated into the Y signal for the luminance and the P^B

and PR signals for the chrominance. Color can be

reproduced more faithfully with this system because each

of these signals is independent. The component signal is

also called the “color difference signal” because the

luminance signal is subtracted from the color signal. A

monitor with component input jacks is required in order to

output component signals.

Dolby Pro Logic II is an improved technique used to

decode vast numbers of existing Dolby Surround sources.

This new technology enables a discrete 5-channel

playback with 2 front left and right channels, 1 center

channel, and 2 surround left and right channels instead of

only 1 surround channel for conventional Pro Logic

technology. There are three modes available: “Music

mode” for music sources, “Movie mode” for movie

sources and “Game mode” for game sources.

■ Composite video signal

■ Dolby Pro Logic IIx

With the composite video signal system, the video signal

is composed of three basic elements of a video picture:

color, brightness and synchronization data. A composite

video jack on a video component transmits these three

elements combined.

Dolby Pro Logic IIx is a new technology enabling discrete

multi-channel playback from 2-channel or multi-channel

sources. There are three modes available: “Music mode”

for music sources, “Movie mode” for movie sources (for

2-channel sources only) and “Game mode” for game

sources.

76 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Glossary

■ Dolby Surround

■ LFE 0.1 channel

Dolby Surround uses a 4-channel analog recording system

to reproduce realistic and dynamic sound effects: 2 front

left and right channels (stereo), a center channel for dialog

(monaural), and a surround channel for special sound

effects (monaural). The surround channel reproduces

sound within a narrow frequency range. Dolby Surround is

widely used with nearly all video tapes and laser discs,

and in many TV and cable broadcasts as well. The Dolby

Pro Logic decoder built into this unit employs a digital

signal processing system that automatically stabilizes the

volume on each channel to enhance moving sound effects

and directionality.

This channel reproduces low-frequency signals. The

frequency range of this channel is from 20 Hz to 120 Hz.

This channel is counted as 0.1 because it only enforces a

low-frequency range compared to the full-range

reproduced by the other 5/6 channels in Dolby Digital or

DTS 5.1/6.1-channel systems.

■ MP3

One of the audio compression methods used by MPEG. It

employs the irreversible compression method, which

achieves a high compression rate by thinning out the data

of hardly audible part to the human ears. It is said to be

capable of compressing the data quantity by about 1/11

(128 kbps) while maintaining a similar audio quality to

music CD.

■ DTS 96/24

DTS 96/24 offers an unprecedented level of audio quality

for multi-channel sound on DVD video, and is fully

backward-compatible with all DTS decoders. “96” refers

to a 96 kHz sampling rate compared to the typical 48 kHz

sampling rate. “24” refers to 24-bit word length. DTS 96/

24 offers sound quality transparent to the original 96/24

master, and 96/24 5.1-channel sound with full-quality full-

motion video for music programs and motion picture

soundtracks on DVD video.

■ Neo:6

Neo:6 decodes the conventional 2-channel sources for 6-

channel playback by the specific decoder. It enables

playback with the full-range channels with higher

separation just like digital discrete signal playback. There

are two modes available: “Music mode” for music sources

and “Cinema mode” for movie sources.

■ PCM (Linear PCM)

■ DTS Digital Surround

Linear PCM is a signal format under which an analog

audio signal is digitized, recorded and transmitted without

using any compression. This is used as a method of

recording CDs and DVD audio. The PCM system uses a

technique for sampling the size of the analog signal per

very small unit of time. Standing for “Pulse Code

Modulation”, the analog signal is encoded as pulses and

then modulated for recording.

DTS digital surround was developed to replace the analog

soundtracks of movies with a 6.1-channel digital sound

track, and is now rapidly gaining popularity in movie

theaters around the world. DTS, Inc. has developed a

home theater system so that you can enjoy the depth of

sound and natural spatial representation of DTS digital

surround in your home. This system produces practically

distortion-free 6.1-channel sound (technically, front left

and right, center, surround left and right, and LFE 0.1

(subwoofer) channels for a total of 5.1 channels). This unit

incorporates a DTS-ES decoder that enables 6.1-channel

reproduction by adding the surround back channel to the

existing 5.1-channel format.

■ Sampling frequency and number of

quantized bits

When digitizing an analog audio signal, the number of

times the signal is sampled per second is called the

sampling frequency, while the degree of fineness when

converting the sound level into a numeric value is called

the number of quantized bits. The range of rates that can

be played back is determined based on the sampling rate,

while the dynamic range representing the sound level

difference is determined by the number of quantized bits.

In principle, the higher the sampling frequency, the wider

the range of frequencies that can be played back, and the

higher the number of quantized bits, the more finely the

sound level can be reproduced.

■ HDMI

HDMI (High-Definition Multimedia Interface) is the first

industry-supported, uncompressed, all-digital audio/video

interface. Providing an interface between any source (such

as a set-top box or AV receiver) and an audio/video

monitor (such as a digital television), HDMI supports

standard, enhanced or high-definition video as well as

multi-channel digital audio using a single cable. HDMI

transmits all ATSC HDTV standards and supports 8-

channel digital audio, with bandwidth to spare to

accommodate future enhancements and requirements.

When used in combination with HDCP (High-bandwidth

Digital Content Protection), HDMI provides a secure

audio/video interface that meets the security requirements

of content providers and system operators. For further

information on HDMI, visit the HDMI website at

“http://www.hdmi.org/”.

77 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Glossary

■ SILENT CINEMA

Yamaha has developed a natural, realistic sound effect

DSP algorithm for headphones. Parameters for

headphones have been set for each sound field so that

accurate representations of all the sound field programs

can be enjoyed on headphones.

■ S-video signal

With the S-video signal system, the video signal normally

transmitted using a pin cable is separated and transmitted

as the Y signal for the luminance and the C signal for the

chrominance through the S-video cable. Using the S

VIDEO jack eliminates video signal transmission loss and

allows recording and playback of even more beautiful

images.

■ Virtual CINEMA DSP

Yamaha has developed a Virtual CINEMA DSP algorithm

that allows you to enjoy DSP sound field surround effects

even without any surround speakers by using virtual

surround speakers. It is even possible to enjoy Virtual

CINEMA DSP using a minimal two-speaker system that

does not include a center speaker.

■ WAV

Windows standard audio file format, which defines the

method of recording the digital data obtained by

converting audio signals. It does not specify the

compression (coding) method so a desired compression

method can be used with it. By default, it is compatible

with the PCM method (no compression) and some

compression methods including the ADPCM method.

■ WMA

An audio compression method developed by Microsoft

Corporation. It employs the irreversible compression

method, which achieves a high compression rate by

thinning out the data of hardly audible part to the human

ears. It is said to be capable of compressing the data

quantity by about 1/22 (64 kbps) while maintaining a

similar audio quality to music CD.

78 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

AUDIO SECTION

• Minimum RMS Output Power for Front, Center, Surround,

Surround Back

VIDEO SECTION

• Video Signal Type (Gray back).................................................. PAL

• Video Signal Type (Video Conversion) .......................... NTSC/PAL

1 kHz, 0.9% THD, 6 Ω ......................................................... 90 W

• Signal Level

• Dynamic Power

Composite ................................................................. 1 Vp-p/75 Ω

S-video ............................ 1 Vp-p/75 Ω (Y), 0.286 Vp-p/75 Ω (C)

Component ................... 1 Vp-p/75 Ω (Y), 0.7 Vp-p/75 Ω (PB/PR)

IHF, 6/4/2 Ω .......................................................... 100/110/125 W

• Maximum Input Signal

CD, etc. Effect On, 1 kHz, 0.5% THD ................... 2.0 V or more

• Signal to Noise Ratio ................................................ 50 dB or more

• Maximum Input Level........................................... 1.5 Vp-p or more

• Frequency Response

CD, etc. to Front L/R ............................. 10 Hz to 100 kHz, –3 dB

• Frequency Response (MONITOR OUT)

• Total Harmonic Distortion

Component Signal .................................... 5 Hz to 60 MHz, –3 dB

1 kHz, 50 W, Front L/R, 6 Ω ................................... 0.06% or less

GENERAL

• Signal to Noise Ratio (IHF-A Network)

• Power Supply ........................................................ 230 V AC, 50 Hz

CD (200 mV) to Front L/R, Effect Off ................... 98 dB or more

CD (250 mV) to Front L/R, Effect Off ................. 100 dB or more

• Power Consumption............................................................... 240 W

• Standby Power Consumption ...................................... 0.8 W or less

• AC Outlets...................................................... 1 (100 W maximum)

• Residual Noise (IHF-A Network)

Front L/R ............................................................... 150 µV or less

• Channel Separation (1 kHz/10 kHz)

• Dimensions (W x H x D) ................................. 435 x 151 x 352 mm

(17-1/8” x 5-15/16” x 13-7/8”)

CD, etc. (5.1 kΩ shorted) to Front L/R

................................................................... 60 dB/45 dB or more

• Weight ............................................................. 9.0 kg (19 lbs 13 oz)

• Tone Control (Front L/R)

BASS Boost/Cut ................................................... 10 dB/100 Hz

TREBLE Boost/Cut .............................................. 10 dB/20 kHz

* Specifications are subject to change without notice.

• Headphone Jack Rated Output/Impedance .............. 400 mV/470 Ω

• Input Sensitivity/Input Impedance

CD, etc. ................................................................. 200 mV/47 kΩ

MULTI CH INPUT ............................................... 200 mV/47 kΩ

• Output Level/Output Impedance

AUDIO OUT (REC) ............................................ 200 mV/1.2 kΩ

SUBWOOFER OUTPUT ............................................ 4 V/1.2 kΩ

• Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz)

H.P.F.

(FRONT SP, CENTER SP, SUR. L/R SP, SUR. B L/R SP:

SMALL/SML) ............................................................12 dB/oct.

L.P.F. (Subwoofer) .........................................................24 dB/oct.

79 En

Download from Www.Somanuals.com. All Manuals Search And Download.

INDEX

Index

COAXIAL INPUT jacks ......................57

COMPONENT VIDEO jacks ..............13

Connect error, iPod controlling status

message ............................................73

Connect MIC!,

DTS decoder prioritize setting, Decoder

mode ................................................ 58

DVD player connection ....................... 17

DVD recorder connection ................... 18

Dynamic range, Sound menu .............. 55

■

Numerics

1 SOUND MENU, Manual setup ........ 49

2 INPUT MENU, Manual setup .......... 49

2ch Enhancer, Sound field program .... 38

2ch Stereo, Sound field program ......... 38

3 OPTION MENU ............................... 59

3 OPTION MENU, Manual setup ....... 50

7ch Enhancer, Sound field program .... 38

7ch Stereo, Sound field program ......... 38

96/24 indicator ..................................... 22

Auto setup error message .................70

Connecting to the FRONT A

■

E)EXTD SUR., Sound menu ............... 56

E)LFE LEVEL, Sound menu .............. 54

E)MULTI CH SET, Input menu .......... 59

E-1:NO FRONT SP,

Auto setup error message ................ 70

E-2:NO SURR.SP,

Auto setup error message ................ 70

E-3:SBR->SBL,

Auto setup error message ................ 70

E-4:NOISY,

Auto setup error message ................ 70

E-5:CHECK SUR.,

Auto setup error message ................ 70

E-6:NO MIC,

Auto setup error message ................ 70

E-7:NO SIGNAL,

Auto setup error message ................ 70

E-8:USER CANCEL,

terminals ...........................................12

Connection, Audio components ...........19

Connection, CD player .........................19

Connection, CD recorder .....................19

Connection, DVD player ......................17

Connection, DVD recorder ..................18

Connection, external decoder ...............19

Connection, HDMI ...............................14

Connection, MD recorder ....................19

Connection, Multi-format player .........19

Connection, Power cable ......................21

Connection, PVR .................................18

Connection, set-top boxes ....................18

Connection, VCR .................................18

Connection, Video components ...........16

Connection,

Yamaha iPod universal dock ...........20

Controlling a TV ..................................63

Controlling other components, Remote

control ..............................................64

Controlling this unit,

Remote control .................................63

Creating original SCENE templates ....31

CROSSOVER, Speaker settings ..........53

Crossover, Speaker settings .................53

CT WIDTH, Sound field parameter .....40

Current status display ...........................35

■

A)DISPLAY SET, Option menu ......... 59

A)INPUT ASSIGNMENT,

Input menu ....................................... 57

A)SPEAKER SET, Sound menu ......... 51

A.DELAY, Audio settings ................... 55

AC OUTLET (SWITCHED) ............... 21

Amplifier function OSD display time,

Display settings ............................... 60

Audio components, Connection ........... 19

Audio delay, Audio settings ................. 55

Audio information ................................ 36

Audio input jacks selection .................. 34

AUDIO jacks ....................................... 13

Audio jacks .......................................... 13

AUDIO SELECT ................................. 34

Audio select, Option menu .................. 60

Audio settings, Sound menu ................ 55

Audio signal flow ................................. 15

AUTO SETUP ..................................... 24

AUTO SETUP, Error message ............ 70

Auto setup error message ................ 70

E-9:INTERNAL ERROR,

Auto setup error message ................ 70

Effect level, Sound field parameter ..... 40

ENHANCER indicator ........................ 22

Extended surround, Sound menu ......... 56

External decoder connection ............... 19

■

F)DYNAMIC RANGE,

B)INPUT RENAME, Input menu ....... 58

B)MEMORY GUARD,

Option menu .................................... 60

B)SPEAKER LEVEL, Sound menu .... 53

Background Video,

Multi channel input setup ................ 59

BGV, Multi channel input setup .......... 59

BI-AMP, Advanced setup .................... 66

Bi-Amplifier, Advanced setup ............. 66

Bluetooth setting, Option menu ........... 61

■

Sound menu ..................................... 55

Factory presets, Advanced setup ......... 66

FL SCROLL, Display settings ............ 60

FRONT B speaker setting, Speaker

settings ............................................. 51

FRONT B, Speaker settings ................ 51

Front input,

Multi-channel input setup ............... 59

Front panel display .............................. 22

Front panel display scroll,

D)CENTER GEQ, Sound menu ...........54

D)DECODER MODE, Input menu .....58

D)PARAM. INI, Option menu .............61

Decoder indicators ...............................22

Decoder mode, Input menu ..................58

Decoder select mode, Decoder mode ...58

DIGITAL AUDIO COAXIAL jacks ...13

DIGITAL AUDIO OPTICAL jacks ....13

DIMENSION,

■

Display settings ............................... 60

FRONT SP, Speaker settings .............. 51

Front speakers, Speaker settings ......... 51

FRONT, Multi-channel input setup ..... 59

Sound field parameter ......................40

Dimension, Sound field parameter .......40

DIMMER, Display settings ..................59

Dimmer, Display settings .....................59

DIRECT ...............................................41

Disconnected, iPod controlling status

message ............................................73

Display settings, Option menu .............59

DIST .....................................................26

DIST, Auto setup result .......................26

DISTANCE ..........................................25

DISTANCE, Auto setup ......................25

DOCK indicator ...................................22

DSP LEVEL, Sound field parameter ...40

DSP level, Sound field parameter ........40

C)AUDIO SELECT, Option menu ...... 60

C)SP DISTANCE, Sound menu .......... 54

C)VOLUME TRIM, Input menu ......... 58

CD player, Connection ........................ 19

CD recorder, Connection ..................... 19

CENTER SP, Speaker settings ............ 51

Center speaker equalizer,

Sound menu ..................................... 54

Center speaker, Speaker settings ......... 51

Center width, Sound field parameter ... 40

CINEMA DSP indicator ...................... 23

COAXIAL IN (1), Input assignment ... 57

COAXIAL INPUT assignment, Input

assignment ....................................... 57

■

G)AUDIO SET, Sound menu .............. 55

Games, Sound field program ............... 38

■

H) HDMI SET, Sound menu ............... 56

Hall, Sound field program ................... 38

HDMI indicator ................................... 22

HDMI set, Sound menu ....................... 56

HDMI, Connection .............................. 14

HEADPHONE, Dynamic range .......... 55

80 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Headphone, Dynamic range .................55

HEADPHONE, Low-frequency effect

level .................................................54

Headphone,

Low-frequency effect level ..............54

Headphones ..........................................35

Headphones indicator ..........................22

High quality sound ...............................41

Multi-information display ....................23

MUTE ..................................................35

MUTE indicator ...................................22

MUTE TYPE, Audio settings ..............55

Muting ..................................................35

Remote control, Troubleshooting ........ 75

REMOTE OUT jacks .......................... 20

Rename, SCENE template ................... 31

Repeat .................................................. 46

Repeat, iPod controlling ...................... 46

Resetting the system ............................ 75

■

Neo:6 Music .........................................39

Night listening mode ............................42

Number of speakers ..............................26

Number of speakers,

S VIDEO jacks .................................... 13

SB L/R SP, Speaker settings ............... 52

SCENE IR code setting,

Advanced setup ............................... 66

SCENE IR, Advanced setup ................ 66

SCENE template selection .................. 28

Selection, Audio input jacks ................ 34

Selection,

MULTI CH INPUT component ...... 34

Selection, SCENE template ................. 28

SET MENU ......................................... 49

Setting remote control codes ............... 65

Setting SCENE template input source,

Remote control ................................ 32

Set-top box connection ........................ 18

Shuffle, iPod controlling ..................... 46

SILENT CINEMA ............................... 39

SILENT CINEMA indicator ............... 23

Simple remote mode,

iPod controlling ............................... 45

SIZE ..................................................... 25

SIZE, Auto setup ................................. 25

SLEEP indicator .................................. 23

Sleep timer ........................................... 37

Sound field programs

■

I) EXTD SUR., Sound menu ...............56

Infrared window, Remote control ........23

INI.VOL., Audio settings ....................55

Initial volume, Audio settings ..............55

Input assignment, Input menu ..............57

INPUT CH,

Multi-channel input setup ................59

Input channel and speaker indicators ...23

Input channel indicators .......................23

Input channels,

Multi-channel input setup ................59

Input menu, Manual setup ...................49

Input rename, Input menu ....................58

Input source indicators .........................22

Input source information display .........36

iPod connected, iPod controlling status

message ............................................73

iPod control, Status message ...............73

iPod using ............................................45

Auto setup result ..............................26

■

OPTICAL IN (2) ..................................57

OPTICAL IN (2), Input assignment .....57

OPTICAL IN (3), Input assignment .....57

OPTICAL INPUT assignment, Input

assignment ........................................57

OPTICAL OUT (4),

Output assignment ...........................57

OPTIMIZER MIC jack, Auto setup .....24

Optimizer microphone .........................24

Optimizer microphone, Auto setup ......24

Optimizing speaker setting ...................24

Option menu, Manual setup .................50

OSD SHIFT, Display settings ..............60

OSD shift, Display settings ..................60

OSD-AMP, Display settings ................60

OSD-SOURCE, Display settings .........60

Other components controlling by remote

control ..............................................64

Other components controlling, Remote

control ..............................................64

■

Jazz, Sound field program ...................38

■

with headphones .............................. 39

Sound menu, Manual setup ................. 49

Source feature OSD display time,

LFE/BASS OUT, Speaker settings ......52

LFE/Bass out, Speaker settings ...........52

Loading..., iPod controlling status

■

PANORAMA,

Display settings ............................... 60

SP ......................................................... 26

SP A B indicators ................................ 22

SP, Auto setup result ........................... 26

Speaker distance ............................ 25, 26

Speaker distance, Auto setup ............... 25

Speaker distance, Auto setup result ..... 26

Speaker distance, Sound menu ............ 54

Speaker distances, Speaker distance .... 54

Speaker level ....................................... 26

Speaker level adjustment ..................... 41

Speaker level, Auto setup result .......... 26

Speaker level, Sound menu ................. 53

Speaker settings, Sound menu ............. 51

Speaker size ......................................... 25

Speaker size, Auto setup ...................... 25

Speaker wiring ..................................... 25

Speaker wiring, Auto setup ................. 25

Speaker wiring/volume level,

Auto setup ....................................... 25

SPEAKER, Dynamic range ................. 55

Speaker, Dynamic range ...................... 55

SPEAKER,

Low-frequency effect level ............. 54

Speaker, Low-frequency effect level ... 54

Specifications ...................................... 79

STRAIGHT ......................................... 39

Straight ................................................ 39

message ............................................73

Low-frequency effect level,

Sound menu .....................................54

LVL ......................................................26

LVL, Auto setup result ........................26

Sound field parameter ......................40

Panorama, Sound field parameter ........40

Parameter initialization,

Option menu .....................................61

PCM indicator ......................................22

PHONES jack .......................................35

Play information display,

iPod controlling ................................46

Play information display,

USB controlling ...............................44

Playing video sources

in the background .............................36

PLII Game ............................................39

PLII Movie ...........................................39

PLII Music ...........................................39

PLIIx Game ..........................................39

PLIIx Movie .........................................39

PLIIx Music .........................................39

Pop/Rock, Sound field program ...........38

Power cable, Connection ......................21

Preset SCENE templates ......................30

PRESET, Advanced setup ....................66

Pro Logic ..............................................39

PVR connection ...................................18

■

MANUAL SETUP, SET MENU .........49

Manual setup, SET MENU ..................49

MAX VOL., Audio settings .................55

Maximum volume, Audio settings .......55

MD recorder, Connection ....................19

Memory guard, Option menu ...............60

Menu browse mode,

iPod controlling ...............................46

Movie Dramatic,

Sound field program ........................38

Movie Spacious,

Sound field program ........................38

MULTI CH INPUT component

selection ...........................................34

MULTI CH INPUT jacks ....................19

Multi channel input setup,

Input menu .......................................59

Multi-channel source

with headphones ..............................39

Multi-format player connection ...........19

■

Remote control codes ........................... iii

81 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

SUBWOOFER PHASE,

■

Speaker settings ............................... 53

Subwoofer phase, Speaker settings ...... 53

SUPPORT AUDIO, HDMI set ............ 56

Support audio, HDMI set ..................... 56

SUR. L/R SP, Speaker settings ............ 52

Surround back left/right speakers, Speaker

settings ............................................. 52

Surround left/right speakers, Speaker

settings ............................................. 52

Yamaha iPod universal dock,

Connection .......................................20

Yamaha Parametric Room Acoustic

Optimizer .........................................24

YPAO ...................................................24

YPAO (Yamaha Parametric Room

Acoustic Optimizer) .........................24

YPAO indicator ....................................22

“

SPEAKERS” or “3DVD” (example)

■

indicates the name of the parts on the front

panel or the remote control. Refer to the

attached sheet or the pages at the end of this

manual for the information about each

position of the parts.

Test tone, Center speaker equalizer ..... 54

TEST, Center speaker equalizer .......... 54

Tonal quality adjustment ..................... 41

Troubleshooting ................................... 67

TU, Advanced setup ............................ 66

Tuner frequency step,

Advanced setup ............................... 66

Turning off the power .......................... 21

Turning on the power ........................... 21

TV Sports, Sound field program .......... 38

■

Unable to play, iPod controlling status

message ............................................ 73

UNIT, Speaker distance ....................... 54

Unit, Speaker distance ......................... 54

Unknown iPod, iPod controlling status

message ............................................ 73

Unplug HP!,

Auto setup error message ................ 70

USB memory device using, USB portable

audio player using ............................ 43

USB playback operation ...................... 43

USB playback styles ............................ 62

USB, Troubleshooting ......................... 72

■

VCR connection ................................... 18

VIDEO AUX jacks, Front panel .......... 21

Video components, Connection ........... 16

VIDEO CONV., Display settings ........ 59

Video conversion, Display settings ..... 59

Video information ................................ 36

VIDEO jacks ........................................ 13

Video jacks .......................................... 13

Video signal flow ................................. 15

Video sources in the background ......... 36

Virtual CINEMA DSP ......................... 39

VIRTUAL indicator ............................. 23

VOLUME level indicator .................... 22

Volume Trim, Input menu ................... 58

■

W-1:OUT OF PHASE,

Auto setup error message ................ 71

W-2:DISTANCE ERROR,

Auto setup error message ................ 71

W-3:LEVEL ERROR,

Auto setup error message ................ 71

WIRING/LEVEL ................................. 25

WIRING/LEVEL, Auto setup ............. 25

82 En

Download from Www.Somanuals.com. All Manuals Search And Download.

Limited Guarantee for European Economic Area (EEA) and Switzerland

Thank you for having chosen a Yamaha product. In the unlikely event that your Yamaha product needs guarantee service, please contact the dealer from

whom it was purchased. If you experience any difficulty, please contact Yamaha representative office in your country. You can find full details on our

website (http://www.yamaha-hifi.com/ or http://www.yamaha-uk.com/ for U.K. resident).

The product is guaranteed to be free from defects in workmanship or materials for a period of two years from the date of the original purchase. Yamaha

undertakes, subject to the conditions listed below, to have the faulty product or any part(s) repaired, or replaced at Yamaha’s discretion, without any charge

for parts or labour. Yamaha reserves the right to replace a product with that of a similar kind and/or value and condition, where a model has been

discontinued or is considered uneconomic to repair.

Conditions

1. The original invoice or sales receipt (showing date of purchase, product code and dealer’s name) MUST accompany the defective product, along with a

statement detailing the fault. In the absence of this clear proof of purchase, Yamaha reserves the right to refuse to provide free of charge service and the

product may be returned at the customer’s expense.

2. The product MUST have been purchased from an AUTHORISED Yamaha dealer within the European Economic Area (EEA) or Switzerland.

3. The product must not have been the subject of any modifications or alterations, unless authorised in writing by Yamaha.

4. The following are excluded from this guarantee:

a. Periodic maintenance and repair or replacement of parts due to normal wear and tear.

b. Damage resulting from:

(1) Repairs performed by the customer himself or by an unauthorised third party.

(2) Inadequate packaging or mishandling, when the product is in transit from the customer. Please note that it is the customer’s responsibility to

ensure the product is adequately packaged when returning the product for repair.

(3) Misuse, including but not limited to (a) failure to use the product for its normal purpose or in accordance with Yamaha’s instructions on the proper

use, maintenance and storage, and (b) installation or use of the product in a manner inconsistent with the technical or safety standards in force in

the country where it is used.

(4) Accidents, lightning, water, fire, improper ventilation, battery leakage or any cause beyond Yamaha’s control.

(5) Defects of the system into which this product is incorporated and/or incompatibility with third party products.

(6) Use of a product imported into the EEA and/or Switzerland, not by Yamaha, where that product does not conform to the technical or safety

standards of the country of use and/or to the standard specification of a product sold by Yamaha in the EEA and/or Switzerland.

(7) Non AV (Audio Visual) related products.

(Products subject to “Yamaha AV Guarantee Statement” are defined in our website at http://www.yamaha-hifi.com/ or

http://www.yamaha-uk.com/ for U.K. resident.)

5. Where the guarantee differs between the country of purchase and the country of use of the product, the guarantee of the country of use shall apply.

6. Yamaha may not be held responsible for any losses or damages, whether direct, consequential or otherwise, save for the repair or replacement of the

product.

7. Please backup any custom settings or data, as Yamaha may not be held responsible for any alteration or loss to such settings or data.

8. This guarantee does not affect the consumer’s statutory rights under applicable national laws in force or the consumer’s rights against the dealer arising

from their sales/purchase contract.

83 En

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Front panel

VOLUME

STANDBY

/ON

OPTIMIZER MIC

SCENE

VIDEO AUX

USB

PROGRAM

INPUT

VIDEO

AUDIO

SPEAKERS

A/B/OFF

PHONES

TONE CONTROL

STRAIGHT

DIRECT

AUDIO SELECT

SILENT CINEMA

EFFECT

H I

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Remote control

POWER POWER

STANDBY

POWER

MUTE

USB

DVD

MD/CD-R TUNER

TV CH

DTV/CBL

DVR

V-AUX/DOCK

AMP

TV VOL

TV INPUT

TV MUTE

SCENE

BAND LEVEL

VOLUME

TITLE

ENTER

DISPLAY

RETURN

MEMORY

REC

FREQ/TEXT

EON

MODE - PTY SEEK - START

PROG h

ENHANCER SUR. DECODE

STRAIGHT DIRECT

NIGHT PARAMETER

MULTI CH IN AUDIO SEL

SLEEP

ENT

Download from Www.Somanuals.com. All Manuals Search And Download.

List of remote control codes

Medion

Micromaxx

Micromedia

Microstar

Mitsubishi

Mizuda

Mustek

Naiko

Onkyo

Orava

P&B

2072

2073

2072

2035

2075

2078

2077

Yukai

Zenith

2078

2038, 2047, 2073

Northgate

Panasonic

2132

2015, 2016, 2017,

2120

2117, 2121, 2123,

2128

2012, 2013, 2014

2129

Blu-ray player

Samsung

2137

DVD Recorder

Apex

JVC

Philips

CD player

2024

2070

2071

2020, 2065, 2066,

2067

2019, 2061, 2062,

2063

2021

2018

2022, 2064

2068

Yamaha

5000, 5013

Pioneer

Proscan

RCA

CD Recorder

Panasonic

2116, 2124, 2129,

2133

Yamaha

5001

2073, 2135

2075

Philips

ReplayTV

Sharp

Sonic Blue

Sony

2118, 2119, 2120

2009, 2010

2119, 2120

2005, 2006, 2007,

2122, 2130, 2131,

2132

DVD

Acoustic Solutions

Pacific

Panasonic

2074

Pioneer

RCA

Sony

Toshiba

Yamaha

Yukai

2078

2030, 2040, 2054,

2057, 2105, 2110

2019, 2026, 2046,

2073, 2081, 2090

2036, 2082

2077

2075

2031, 2042, 2050,

2051

2076

2074

2075, 2078, 2086

2077

2085

Aiwa

Akai

2055, 2100

2096

Philips

Akura

2076

2023

2069

Stack 10

Stack 9

Systemax

Tagar Systems 2132

Tivo

Alba

Apex

Awa

2078, 2086

2027, 2049

2078

Pioneer

Proline

Provision

RCA

DVD/LD

Pioneer

Axion

2078

2036

2116, 2121, 2122,

2123, 2130, 2131

2004, 2125, 2132

2132

2133

2132

2011

2132

Brainwave

Brandt

Broksonic

Bush

Centrex

Classic

Clatronic

Coby

2096

2073, 2085

2060

2075, 2078, 2112

2077

2078

DVD/VCR

JVC

Panasonic

Red Star

Reoc

Roadstar

Rowa

Saba

Sabaki

Samsung

Toshiba

Touch

UltimateTV

Viewsonic

Voodoo

1017, 2045

1071, 2087

1020, 1072, 2040,

2105

2075

2078

2074

2032, 2041, 2104,

2113

2074

2095

Philips

RCA

Samsung

Sharp

1025

Yamaha

ZT Group

1022, 2042

1021, 2041, 2104

1023, 1073, 2043,

2106

1019, 1074, 2039,

2107

1024, 1075, 2044,

2108

1026, 2047

C-Tech

CyberHome

Daewoo

Dansai

Daytek

DEC

2074

HD DVD

Toshiba

2025, 2079, 2091

2092, 2098

2096

2080, 2089

2075

Sansui

Sanyo

ScanMagic

Scientific Labs 2074

Scott

SEG

Sharp

2136

5011

2078

Sony

iPod

Yamaha

2088

Toshiba

Denon

Denver

Diamond

DK Digital

Dual

2030, 2102, 2103

2075, 2076

2074

2094

2078

2074, 2086

2034, 2043, 2059,

2093, 2106

2076

2074

2074, 2078

2076

Zenith

DVD-DVR

Panasonic

Pioneer

Samsung

Toshiba

Silva

Singer

2067

2114

2115

2068

D-Vision

DVX

2096

2074

Skymaster

Skyworth

SM Electronic 2074, 2078

Elta

2096

Euroline

Funai

Global Solutions2074

Global Sphere 2074

Goodmans

Grundig

H&B

2096

2052, 2058

Sony

2028, 2029, 2039,

2083, 2107

2074

2075

2074, 2078

2052, 2058

2074

2072

2074

2076

2030

2096

DVR

ABS

Alienware

CyberPower

Dell

Soundmaster

Soundmax

Standard

Star Cluster

Starmedia

Supervision

Sylvania

Synn

TCM

Teac

Tec

Technics

Technika

Technosonic

Tevion

Thomson

Tokai

2132

2123, 2128, 2129,

2133

2075, 2077, 2078

2077, 2098

2075

2074

2078

DIRECTV

Haaz

DISH Network 2126, 2127

Hitachi

Home Electronics

2078

Innovation

Irradio

JDB

2032, 2072

Dishpro

Echostar

Expressvu

Gateway

GOI

Hewlett Packard2132

Hitachi 2008

Howard Computers

2132

2126

2126, 2127

2126

2132

2126

2072

2134

2078

2033, 2045, 2053,

2073, 2099

2030, 2097

2075

2074

JVC

2072, 2074

2085, 2109

2076

2026, 2044, 2048,

2056, 2073, 2108,

2111

Kenwood

Kingavon

Koda

Lawson

Lenco

HTS

2126

2123, 2128

2123

Toshiba

Hughes

Humax

Hush

2075

2132

Lifetec

Limit

LogicLab

Luxor

Magnavox

Magnum

MBO

2084, 2087

2072

2074

2077

2037, 2073, 2075

2072

2078

United

2078

2074

2077

2000, 2001, 2003,

2030, 2101

iBUYPOWER 2132

Voxson

Wharfedale

Xlogic

Yakumo

Yamada

Yamaha

JVC

Linksys

2126, 2127

2132

Media Center PC

2132

Microsoft

Mind

2132

Niveus Media 2132

iii

Download from Www.Somanuals.com. All Manuals Search And Download.

Bang & Olufsen 0205

Dantax

Daytron

De Graaf

Decca

0217

0060, 0061, 0208

0210

0204, 0207, 0213,

0217

0213, 0217

0200

0057

0208, 0213, 0217

0208

0207, 0215, 0216

0207, 0208, 0215

0060, 0127, 0205,

0207

Genexxa

0209, 0211, 0213,

0218

0060

LD player

Yamaha

Basic Line

0208, 0209, 0213,

2002

0218

0207

0217

0228

0060

Gibralter

GoldHand

GoldStar

Bastide

Baur

Beko

0200

Yamaha

0060, 0061, 0127,

0128, 0200, 0201,

0207, 0208, 0210,

0213, 0214, 0215,

0217

0171, 0201, 0204,

0206, 0208, 0213,

0217, 0240

5002, 5003, 5004

Desmet

Diamond

Dimensia

Dixi

DTS

Dual

Belcor

TAPE DECK

Yamaha

Bell & Howell 0058, 0064

5005, 5006

Benq

0081

Beon

Bestar

0213, 0217

0213

Goodmans

TUNER

Yamaha

5007, 5008, 5009,

5010, 5012, 5014,

5015, 5016, 5017,

5018

Binatone

Black Star

Blaupunkt

Blue Sky

Bondstec

Boots

0207

0214

0255

0209, 0218

0214

Dual-Tec

Dumont

GPM

Graetz

Granada

0209, 0218

0211

Durabrand

Dux

Dynatron

Elbe

0126

0217

0213, 0217

0203, 0204, 0212,

0218

0204, 0207, 0210,

0213, 0217

0208, 0209, 0217

0128, 0130, 0222,

0236, 0255

0062

0200, 0206, 0207

0060, 0061

Acer

Acme

Acura

ADA

0207

Grandin

Grundig

0093

0207

0208

0255

Bradford

Brandt

0062

0216, 0226

0205, 0213, 0217

0200, 0207

0060

0138

0205

Brionvega

Britannia

Brockwood

Broksonic

Bruns

Elbe-Sharp

Elcit

ELECTRO TECH

0208

Electroband

Electrohome

Elin

0204

0204, 0205

Grunpy

Halifax

Hallmark

Hampton

Hanseatic

ADC

Admiral

0206

0058, 0205, 0206,

0210, 0211

0200, 0207

0200

0206

0204

0127, 0200, 0207,

0208

0028, 0139, 0229,

0237

0059, 0065, 0127,

0129, 0130, 0200,

0204, 0208, 0209,

0213, 0217, 0218,

0255

0209, 0218

0206, 0209, 0218

0200

0200, 0207, 0208,

0209, 0217, 0218

0212

0213

0207

0204, 0206, 0208,

0209, 0218

0062

0200, 0207

0059

0203, 0207, 0208,

0213, 0215, 0217

0204, 0208

0062

0206, 0207, 0208,

0218

0216

0200

0208, 0209, 0213,

0217, 0218

0209, 0218

0006, 0014, 0015,

0016, 0042, 0060,

0061, 0095, 0105,

0127, 0156, 0179,

0180, 0204, 0207,

0210, 0211, 0215,

0216, 0251

0213

0209, 0218

0200, 0207

0200, 0207, 0208,

0214, 0215

0206, 0207, 0213,

0217

0127, 0200, 0206,

0207, 0208, 0209,

0213, 0218

0200, 0218

0062

0211, 0213, 0214,

0215

0213, 0217

0063

0211

0208

0201, 0204, 0207,

0208, 0209, 0213,

0217, 0218

0206, 0208

0208, 0214

Adyson

Agashi

Agazi

AGB

BSR

0215

0059, 0060, 0061

0200, 0207, 0213,

0217

0209, 0213, 0218

0215

BTC

Bush

0209, 0218

0177, 0208, 0209,

0210, 0213, 0215,

0216, 0217, 0218,

0230, 0237

0060, 0061

0206

0208

0213, 0217

0127

Hantarex

Harvard

HCM

Elite

Elman

Elta

Aiko

0200, 0208

Hifivox

Higashi

Hinari

Aiwa

Akai

Candle

Capsonic

Cascade

Cathay

CCE

Emerson

0060, 0061, 0062,

0064, 0128, 0205

0060, 0061

0213, 0217

0080

0208

0206

0217

0200

0206, 0207, 0213

0200, 0204, 0207,

0213, 0215

0208

0212, 0217, 0226

0200, 0207, 0210

0210

0204, 0205, 0207,

0213, 0215, 0217

0200, 0207, 0208,

0213, 0214

0064, 0127, 0128,

0205, 0207, 0215

0213, 0218

Envision

Erres

ESA

Hisawa

Hitachi

Celebrity

Centurion

Century

CGE

Cimline

Citizen

0059

0213, 0217

0205

0214, 0215

0208, 0218

0060, 0061, 0062,

0064

Etron

Euro-Feel

Euroline

Euroman

Euromann

Europhon

Akiba

Akura

Alaron

Alba

Hornyphon

Hoshai

Huanyu

Hygashi

Hyper

ALBIRAL

Allstar

Amplivision

Amstrad

City

0208

Fenner

Clarivox

Clatronic

0212, 0217

0206, 0207, 0208,

0209, 0213, 0214,

0218

Ferguson

Fidelity

Finlandia

Finlux

Amtron

Anam

Anam National 0062

CMS

0200

Hypson

ICE

0208

Colortyme

Concerto

Concorde

Condor

Contec

0060, 0061

0208

0200, 0207, 0213

0200, 0207, 0208

Firstline

Fisher

Anglo

0208

Anitech

Ansonic

AOC

0206, 0208

0203, 0208

0060, 0061

0118, 0122, 0132

0216

0200

0207

0213, 0217

0205, 0211

0213

Flint

Formenti

ICeS

IMA

Imperial

Contec/Cony 0062

Continental Edison

0216

0200, 0205, 0207,

0215, 0217

Apex

Arc en Ciel

Arcam

Arcam Delta

Aristona

ASA

Asberg

Astra

Asuka

Formenti-Phoenix

0200

Fortress

Cosmel

Craig

0208

0062

Indiana

Infinity

Ingelen

Ingersol

Inno Hit

0205

0206, 0208, 0210,

0211, 0214

0023, 0024, 0025,

0088, 0127

0033, 0034, 0035,

0036, 0037, 0062,

0206

Crosley

Crown

0205, 0214, 0215

0062, 0063, 0128,

0208, 0213, 0217

Frontech

Fujitsu

Funai

0208

CS Electronics 0200, 0207, 0209,

0214, 0218

0200, 0206, 0207,

0209, 0218

0200, 0207, 0213,

0217

CTC

0214

Innovation

Interbuy

Interfunk

Atlantic

Curtis Mathes 0057, 0060, 0061,

0064, 0065

Futuretech

Gateway

GBC

0062

0094

0205, 0211, 0213,

0214, 0216, 0217

0200

0206, 0207, 0218

0201, 0208, 0209,

0213, 0217, 0218

0209, 0218

0207, 0215

0200, 0209, 0213,

0218

Atori

Audiosonic

0208

CXC

0062

0207, 0208, 0209,

0213, 0216, 0217,

0218

0207

0062

0205, 0206, 0207

0200

0216

Cybertron

Daewoo

0209, 0218

0208, 0215, 0218

0057, 0060, 0061,

0122, 0147

0204, 0207, 0211,

0213, 0217

International

Intervision

Irradio

0060, 0061, 0120,

0127, 0155, 0193,

0200, 0207, 0208,

0213, 0218, 0238

0200, 0209, 0218

0200, 0206, 0213,

0217

AudioTon

Audiovox

Autovox

Awa

GEC

Isukai

ITC

ITS

Dainichi

Dansai

Geloso

General Technic 0208

0208, 0210, 0215

Baird

Download from Www.Somanuals.com. All Manuals Search And Download.

ITT

ITV

JBL

JC Penney

JCB

0129, 0208, 0211

0208, 0217

0063

0057, 0060, 0061

0059

0060, 0061

0017, 0018, 0019,

0108, 0136, 0153,

0178, 0190, 0213,

0218

0200, 0207, 0208,

0209, 0218

0207

0200, 0207

0211

0207, 0208, 0212,

0217

0059, 0060, 0061,

0200

0128, 0210

0215

Medion

Megatron

Melectronic

0206, 0208

0061

0200, 0207, 0208,

0211, 0213, 0216,

0217

0058, 0061, 0064,

0208

Panasonic

0006, 0007, 0063,

0073, 0074, 0097,

0110, 0114, 0137,

0141, 0151, 0162,

0165, 0186, 0204,

0211, 0244, 0245,

0246, 0254

RFT

0203, 0205

0200

0213, 0217

0206, 0208, 0209,

0218, 0237

0205

0200

0205

0204, 0205, 0211,

0216

0212

0204, 0206, 0207,

0208

0201, 0204, 0210,

0211, 0215

0204

Rhapsody

R-Line

Roadstar

Jensen

JVC

Memorex

Robotron

Rowa

RTF

Memphis

Metz

MGA

Micromaxx

Microstar

Minerva

Minoka

Pathe Cinema 0200, 0203, 0207,

0212, 0215

Pathe Marconi 0212, 0216

Pausa

Perdio

Philco

0205

Saba

0060, 0061

0206, 0208

0204

Kaisui

0208

0200

0060, 0061, 0063,

0128, 0205, 0214,

0215

saccs

Saisho

Kamosonic

Kamp

Kapsch

0213

Salora

Mitsubishi

0006, 0015, 0016,

0048, 0060, 0061,

0104, 0112, 0113,

0125, 0205, 0213

0200, 0201, 0202,

0203, 0204, 0207

Karcher

Philharmonic 0207

Philips 0040, 0060, 0063,

Sambers

Sampo

0060, 0061, 0083,

0101

Kawasho

0072, 0115, 0116,

0124, 0130, 0150,

0175, 0184, 0187,

0205, 0207, 0213,

0215, 0217, 0220,

0221, 0232, 0233,

0252, 0253

Mivar

Samsung

0029, 0030, 0031,

0032, 0044, 0045,

0046, 0047, 0060,

0061, 0065, 0068,

0069, 0071, 0079,

0087, 0127, 0128,

0130, 0144, 0160,

0161, 0170, 0176,

0183, 0185, 0200,

0201, 0206, 0207,

0208, 0213, 0217,

0239, 0241, 0242,

0243

Kendo

Kennedy

Kenwood

Kingsley

Kloss Novabeam

Montgomery Ward

0058

MTC

0060, 0061

0200, 0207

0060, 0061, 0128,

0200

0062

0203

0213

0209, 0218

0213, 0217

0205

0208

0062, 0127, 0207

0200, 0212

Multi System 0217

Multitech

Philips Magnavox

0124

Phoenix

Kneissel

Kolster

Konka

Korpel

Korting

Koyoda

KTV

Kyoto

Lenco

Lenoir

Lesa

0062, 0127, 0128,

0200, 0207, 0208,

0210, 0214, 0215,

0217

0200, 0207

0061

0200, 0205, 0213,

0217

0200, 0205, 0213,

0217

Phonola

Murphy

NAD

Naonis

NEC

Pilot

Pioneer

0060

0210

0012, 0013, 0060,

0061, 0098, 0109,

0117, 0128, 0181,

0182, 0194, 0195,

0211, 0213, 0216,

0217, 0250

0206, 0213

0075

Sandra

Sansui

Sanyo

0200, 0207

0026, 0053, 0060,

0061, 0096, 0127

0205, 0207, 0210,

0213, 0217, 0255

0213, 0217

0214

0082, 0101

0208, 0213

0209, 0218

0200, 0207

0200, 0206, 0207,

0209, 0213, 0217,

0218

0061

0200, 0207

0216

0129, 0211

0205, 0211, 0213,

0216

0217

0211

0084

0207

0062, 0218

0213

0126, 0204, 0208,

0213, 0217, 0235

0218

0123, 0126, 0213

0020, 0021, 0022,

0049, 0060, 0064,

0127, 0128, 0200,

0203, 0207, 0215

0217

0208

0207, 0208

0214

Neckermann

Leyco

0206, 0213, 0217

0016, 0038, 0039,

0127, 0128, 0157,

0158, 0163, 0164,

0166, 0188, 0189,

0200, 0201, 0207,

0208, 0210, 0213,

0214, 0215, 0217

0217

NEI

Nesco

Plantron

Polaroid

Poppy

Portland

Prandoni-Prince 0204, 0210

Precision

Prima

Profex

Profi-Tronic

Proline

Proscan

Prosonic

Protech

SBR

NET-TV

New Tech

New World

Nicamagic

Nikkai

SCHAUB LORENTZ

0211

Schneider

0208

0060, 0061

0207, 0209, 0213,

0215, 0216, 0217,

0218

0207

0208, 0211

0208

0213

Scotch

Scott

Sears

0061

Liesenk

Life

Lifetec

Loewe

0060, 0061, 0062

0057, 0060, 0061,

0064

0200, 0206, 0207,

0214, 0215, 0217

0204

0206, 0208

Nikko

0206, 0208, 0218

0063, 0128, 0203,

0204, 0223, 0227

0205, 0213, 0217

0058

0210, 0217

0210, 0213, 0217

0213

Nobliko

Nogamatic

Nokia

0057

SEG

SEI

0200, 0207, 0217

0206, 0207, 0208,

0213, 0214, 0215,

0217

0060, 0061

0217

0060

0213, 0217

0208

0152, 0214

0201, 0206, 0207,

0213, 0214, 0215,

0217

0218

0064

Loewe Opta

Logik

Luma

Lumatron

Lux May

Luxman

Luxor

Nordmende

SEI-Sinudyne 0204, 0205, 0211

Nordvision

Oceanic

Olevia

ONCEAS

Onwa

Seleco

Sencora

Sentra

Serino

Sharp

0210, 0211, 0215

0208

0218

Proton

Provision

Pulsar

Pye

Pymi

Quasar

Quelle

0060, 0061

0200

0201, 0207, 0210

0057, 0061, 0063,

0064

0204, 0205, 0214,

0215, 0217

0200, 0204, 0207

0060, 0061, 0063,

0102, 0103, 0150

0206, 0208

0009, 0010, 0011,

0060, 0061, 0066,

0070, 0087, 0111,

0143, 0145, 0167,

0168, 0169, 0198,

0204, 0224, 0247,

0248, 0249

0060

0204, 0205, 0215

0212

0255

0213

0058

LXI

Orbit

Orion

Magnadyne

Orline

Orsowe

Osaki

Magnafon

Magnavox

0204

0127, 0206, 0207,

0209, 0218

0201

0209, 0218

0218

Radialva

Radio Shack

Radio Shack/Realistic

0057, 0060, 0061,

Shogun

Siarem

Sicatel

Siemens

Sierra

Signature

Silva

Singer

Magnum

Majestic

Mandor

Manesth

Osio

Oso

Osume

0058

0206

0062, 0064

0213, 0217

0206, 0207, 0213,

0217

0060, 0061, 0063,

0090, 0213, 0217

0205

0200, 0213, 0217

0204, 0207, 0208,

0210, 0213, 0217

0213, 0217

Otto Versand 0204, 0207, 0213,

0215, 0216, 0217,

0255

Pael

Palladium

Panama

Radiola

Radiomarelli

Radiotone

RCA

0204, 0205, 0214

0213

0057, 0060, 0061,

0091, 0133, 0135,

0147, 0149

0064

0213, 0217

0206, 0210, 0211

Marantz

0200

0200, 0207

0207

0200, 0206, 0207,

0208

0205, 0214, 0215

0204, 0205, 0215,

0217

0211

Marelli

Mark

Matsui

Sinudyne

Realistic

Revox

Rex

Skantic

Solavox

Mediator

Download from Www.Somanuals.com. All Manuals Search And Download.

Sonoko

0206, 0207, 0208,

0213, 0217

0211

Uher

Ultravox

0211, 0213

0200, 0205, 0207,

0214, 0215

Daewoo

0155, 0238, 1038,

1067

Dual

Dumont

1043, 1046

1042, 1046, 1047,

1049

1005

1003

Sonolor

Sontec

Sony

0147, 1030

0240, 1069

0236, 1062

0156, 1039

0153, 1036

0150, 1033

0235, 1065

0151, 1034

0150, 0232, 0233,

1033, 1062, 1063

0152, 1035

0149, 1032

0237, 1066

0144, 0239, 1027,

1068

0213, 0217

United

Universum

0217

Goodmans

Grundig

Hitachi

JVC

Magnavox

Orion

Dynatech

Electrohome

Electrophonic 1003

Elta

0041, 0059, 0067,

0085, 0086, 0174,

0196, 0199, 0208,

0219, 0234

0127, 0128, 0129,

0201, 0206, 0213,

0214, 0215, 0217

0212

0210, 0211, 0213,

0214, 0215, 0217

0208, 0217

1050

Univox

Vestel

Emerson

1003, 1004, 1005,

1012, 1013

1050

1043

1042

1046, 1047, 1049

1042, 1043, 1046,

1047, 1049

Sound & Vision 0209, 0218

Soundesign

Soundwave

SSS

0060, 0061, 0062

Panasonic

Philips

Etzuko

0213, 0217

0060, 0062

0207, 0208, 0209,

0213, 0218

0217

Vexa

Victor

Ferguson

Fidelity

Finlandia

Finlux

0213

Standard

VIDEOLOGIC 0200

Videologique 0200, 0207, 0209,

0218

Videosat

VideoSystem 0213

Videotechnic 0200

Quasar

RCA

Roadstar

Samsung

Starlight

Starlite

Stenway

Stern

0062

0218

0214

FIRST LINE 1044, 1045, 1049,

1050

Fisher

Flint

Formenti/Phoenix

1046

Fuji

Fujitsu

Funai

Galaxy

Garrard

GBC

0210, 0211

0208, 0218

0208, 0213

0200, 0204, 0207

0200

0208

0059

0209

0208

0200, 0207

0060, 0061, 0063,

0080, 0134, 0142,

0148

0062, 0080

0217

Sharp

Sony

Sylvania

Tatung

Toshiba

0145, 1028

0234, 1064

0148, 1031

0237, 1066

0146, 0237, 1029,

1066

1001, 1047

1044

Sunkai

Vidtech

Viewsonic

0060, 0061

Sunwood

Superla

SuperTech

Supra

Supreme

Susumu

Sutron

0076, 0077, 0092,

0099, 0172, 0173

0200, 0207

0213

0213, 0217

0205, 0210, 0211,

0213

0207, 0212

0057, 0058, 0060,

0061, 0063

0213, 0217, 0218

0200, 0207, 0212,

0215

Visiola

Vision

Vortec

Voxson

1004

1042

1005, 1042

1042

1005

Zenith

0154, 1037

VCR

Admiral

Adventura

Aiwa

Sydney

Sylvania

Waltham

Wards

1008, 1013

1005

1005, 1042, 1043,

1044, 1066

1007, 1043

1050

1002, 1004, 1009,

1014, 1030

1046

Watson

Watt Radio

GEC

Geloso

General Technic 1044, 1048

Go Video

GoldHand

Goldstar

Symphonic

Sysline

Sytong

Akai

1050

Akiba

Akura

Alba

0200

Wega

Weltblick

Weston

White Westinghouse

0200, 0207, 0217

Yamaha

0205

0213, 0217

0215

1043, 1050

1044, 1050

1014

1050

1000, 1003, 1042,

1045

1042, 1045, 1050,

1069

Tandy

0127, 0207, 0209,

0211, 0218

0200, 0207, 0210

0127, 0204, 0207,

0213, 0217, 0237

0206, 0208

0127

0207, 0208, 0214,

0215

0060, 0061

0058, 0060, 0061,

0062

0216

0218

0065, 0213, 0216

0218

0208, 0214, 0217

0207

American High 1004

Tashiko

Tatung

Amstrad

Anitech

ASA

Asha

Asuka

1042

1050

1045, 1046

1002, 1014

1042, 1045, 1046,

1050

Goodmans

0000, 0001, 0002,

0003, 0004, 0005,

0060, 0061

TCM

Teac

Tec

Gradiente

Graetz

Granada

Grandin

Grundig

Hanseatic

Harley Davidson1005

Harman/Kardon 1000

Harwood

HCM

1005

1043, 1047

1046, 1047, 1049

1042, 1045, 1050

1046, 1050, 1062

1045, 1046

Yamishi

Yoko

0218

0200, 0206, 0207,

0208, 0209, 0213,

0217, 0218

0209, 0218

0210

0058, 0060, 0100,

0105, 0119, 0121,

0154

Audio Dynamics1000

Audiovox

Baird

Basic Line

Baur

Beaumark

Techwood

Teknika

1003

1042, 1043, 1047

1044, 1050

1046

Yorx

Zanussi

Zenith

Teleavia

Telecor

Telefunken

Telegazi

Teletech

Teleton

1002, 1014

1006

1050

1001

1044, 1050

1044

1007, 1010, 1039,

1042, 1043, 1046,

1049

Bell & Howell 1001

Blaupunkt

Broksonic

Bush

1046, 1048

Headquarter

Hinari

Hisawa

Hitachi

1012, 1013

1044, 1050, 1066

1003

1002, 1003

1004

TV/DVD

Aiwa

Apex

Broksonic

Bush

Televideon

Tensai

0200

0208, 0209, 0213,

0218

0139, 2055

0132, 2049

0138, 2060

0230, 2112

0136, 2053

0137, 0254, 2054,

2110

0133, 0135, 2050,

2051

0134, 2052

0226, 2109

0131, 0231, 2048,

2111

Calix

Candle

Canon

CCE

Tesmet

Tevion

Texet

0213

1006

Hughes Network Systems

1010

Hypson

Imperial

Inno Hit

Innovation

0206, 0208

0200, 0207

0191, 0192, 0207,

0213, 0216, 0226

0212, 0217

0060, 0061

0213

0200, 0207

0027, 0043, 0053,

0054, 0064, 0078,

0089, 0090, 0106,

0107, 0127, 0131,

0140, 0146, 0159,

0197, 0225, 0231,

0237

JVC

Panasonic

CGE

1042, 1043

1044, 1050

1002, 1003

1000

1006

1002, 1003, 1006,

1014

Cimline

Citizen

Colortyme

Colt

1044, 1050

1042

1046, 1050

1044, 1048

Thomson

RCA

Thorn

TMK

Tokai

Tokyo

Toshiba

Sylvania

Thomson

Toshiba

Craig

Instant Replay 1004

Interbuy

Interfunk

Intervision

Irradio

ITT

ITV

1045

1046, 1047

1042

1045, 1050

1043, 1047

1045

1000, 1001, 1002,

1003, 1004, 1006

1004

Crown

1050

Curtis Mathes 1000, 1002, 1004,

1009

Cybernex

Daewoo

TV/DVD/VCR

Panasonic

Samsung

Sharp

Sylvania

Toshiba

1002, 1014

1005, 1038, 1061,

1067

1050

1044

0141, 1040, 2057

0241, 1070, 2113

0143, 1028, 2059

0142, 1041, 2058

0140, 1029, 2056

JC Penney

Dansai

Dantax

DBX

De Graaf

Decca

JCL

Jensen

JVC

Towada

Transtec

Trident

Tristar

0211, 0215

0200

0204

0218

0204

1000

1007

1046, 1049

1042, 1043, 1046

1010

1000, 1001, 1007,

1011, 1017, 1036,

1043

TV/VCR

Aiwa

Bush

0237, 1066

Denon

Dimensia

Triumph

1009

Kaisui

1050

Download from Www.Somanuals.com. All Manuals Search And Download.

DSP-AX563

The circled numbers and alphabets correspond to those in the Owner’s Manual.

■ Front panel

VOLUME

STANDBY

/ON

OPTIMIZER MIC

SCENE

VIDEO AUX

USB

PROGRAM

INPUT

VIDEO

AUDIO

SPEAKERS

A/B/OFF

PHONES

TONE CONTROL

STRAIGHT

DIRECT

AUDIO SELECT

SILENT CINEMA

EFFECT

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Remote control

POWER POWER

STANDBY

POWER

MUTE

USB

DVD

MD/CD-R TUNER

TV CH

DTV/CBL

DVR

V-AUX/DOCK

AMP

TV VOL

TV INPUT

TV MUTE

SCENE

BAND LEVEL

VOLUME

TITLE

ENTER

DISPLAY

RETURN

MEMORY

REC

FREQ/TEXT

EON

MODE - PTY SEEK - START

PROG h

ENHANCER SUR. DECODE

STRAIGHT DIRECT

NIGHT PARAMETER

MULTI CH IN AUDIO SEL

SLEEP

ENT

Printed in China

WN26160

Download from Www.Somanuals.com. All Manuals Search And Download.

Whirlpool Oven GBS307PRB00 User Manual
Whirlpool Ventilation Hood LI3Z4C User Manual
Winegard Satellite TV System RA 7296 User Manual
Woodstock Planer W1214 User Manual
Yamaha Offroad Vehicle 5TH 28199 15 User Manual
Zenith Flat Panel Television E44W46LCD User Manual
Zenoah Brush Cutter BCZ2602DL User Manual
Zenoah Plumbing Product PE2300 User Manual
Zephyr Ventilation Hood CPA E42ASX User Manual
Zephyr Ventilation Hood ESL M90AS User Manual