Xantech Network Card HDMI1X4 User Manual

HDMI1X4  
User Manual  
- 1 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTRUCTIONS  
1) Connect the supplied cable from the HDTV HDMI sources into the 1x4 HDMI Splitter input. HDMI  
to HDMI cable for HDMI source or HDMI to DVI cable for DVI source.  
2) Connect the cables from your displays (monitor or projector) into the HDMI outs of the 1x4 HDMI  
Splitter.  
3) Plug the 5VDC power supply into the 1x4 HDMI Splitter.  
DIP SWITCH GUIDELINES  
Inside the HDMI1X4 is a bank of Dip Switches. Below is a table describing their functions. By default,  
all switches are set to the Off position.  
Dip Switch #  
Name  
Description  
1
2
3
4
5
6
7
8
Switching Delay  
On Board EDID  
Adds a 3 second delay to switching  
Feeds a generic HDMI EDID (720p/1080i) to all inputs  
IR Code Dip Switch Corresponds to Dip Switch 1 on RMT16-IR  
IR Code Dip Switch Corresponds to Dip Switch 2 on RMT16-IR  
Unused  
Unused  
Unused  
-
-
-
Edge Select  
+ Edge Pixels  
How to open the 1x4 HDMI Splitter:  
To access the dip switches, just remove the four screws on the bottom. Slide the top portion off of the  
bottom and you should see the dip switches on the board.  
- 3 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
1.65 Gbps  
Video Amplifier Bandwidth  
Input Video Signal  
Input DDC Signal  
Single Link Range  
Input Connector Type  
Output Connector Type  
Power Consumption  
Power Supply  
1.2 volts p-p  
5 volts p-p (TTL)  
1080p / 1920 x 1200  
HDMI Type A 19 pin female  
HDMI Type A 19 pin female  
10 Watts (max.)  
5V DC  
Dimensions  
Shipping Weight  
12”W x 1.25”H x 4.125”D  
5 lbs.  
Technical Support  
Mailing Address  
Hours:  
Phone:  
7AM-5PM Pacific  
800.843.5465  
press 2 for Tech Support  
800.492.6832  
Xantech Corporation  
13100 Telfair Avenue, 2/F  
Sylmar, CA 91342  
Fax:  
email:  
HDMI1X4 User Manual © 2007 Xantech Corporation  
This document is copyright protected. No part of this manual may be copied or reproduced in any  
form without prior written consent from Xantech Corporation.  
Document Number 08905131A  
- 4 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Weslo Treadmill WETL207080 User Manual
Weslo Treadmill WLTL332050 User Manual
Whirlpool Refrigerator WRS325FNAM User Manual
Wilton Sander 4002 User Manual
Wisconsin Aluminum Foundry Lawn Mower W3532 User Manual
Xantrex Technology Battery Charger TC10 User Manual
Zanussi Dishwasher 402020 User Manual
Zanussi Freezer ZCUF 41 User Manual
Zanussi Washer ZWD 1260 W User Manual
Zephyr Ventilation Hood ZVO E30AG User Manual